Line up worker jobs in Billings, MT

POSITION: Shop Laborer SHIFT: 6:00 am - 4:30 pm, Monday - Thursday (OT as needed on Fridays) PAY RATE: $18.00 - $20.00 per hour (DOE) + Full Benefits Package LOCATION: Billings, MT TrueNorth Steel is looking to hire a Shop Laborer to assist with its bridge production. This is a great way to get your foot in the door of the steel industry. If you are punctual, responsible, have an attention to detail, and have a positive attitude---we want you to apply! Since 1945, TrueNorth Steel has been delivering quality manufactured and fabricated steel products. Our values of Safety, Integrity, Humility, Focus, Knowledge, Commitment, and Confidence guide our everyday work. If you're looking for a job with an industry leader offering great benefits, TrueNorth Steel is the place for you! SUMMARY OF RESPONSIBILITIES This position is an entry-level position at the site production level. This position will be assisting the production of our bridge line, performing various tasks while learning about this exciting industry. ESSENTIAL JOB FUNCTIONS Follow all company safety and quality requirements. Understand and follow all reasonable directions provided by the Supervisor, or designated mentor, regarding completion of tasks in written or verbal format. Master, within the prescribed probationary period, tasks associated with the applicable operational area of culvert manufacturing or steel fabrication. Tape measure reading to 1/16”. Gain operational experience, within the prescribed probationary period, on equipment associated with the applicable operational area of culvert manufacturing or steel fabrication. Operate general hand tools and equipment as required. Responsible for the proper use and care of hand tools and equipment. Responsible for keeping work areas clean, orderly, and free of hazards. Understand the safe practices outlined in the TrueNorth Steel Safety Manual, utilize and maintain appropriate Personal Protective Equipment (PPE) and to bring any and all unsafe conditions to the immediate attention of the Supervisor. Willing to work flexible hours and overtime or weekends as needed. Prompt and dependable attendance. Other duties as assigned. KNOWLEDGE, SKILLS AND QUALITIES Mathematical Skills- Ability to read and understand a tape measure and do simple arithmetic, including addition, subtraction, multiplication, and division of whole numbers, feet, inches, and fractions. Reasoning Ability- Ability to define problems, collect data, establish facts, and draw valid conclusions. Good oral and written communication skills. Ability to understand instructions, written and oral. Ability to accept responsibility and account for his/her actions and the trait of being dependable and trustworthy. Ability to be truthful and be seen as credible in the workplace. Ability to work cooperatively with other people and subordinate personal interests in order to achieve a common goal. Ability to adapt to change in the workplace. EDUCATION AND WORK EXPERIENCE No experience required!

**Employment Offers are Contingent upon Successful Completion of:** + Verification of Work Authorization and Employment Eligibility + Substance Abuse Screening + Physical Exam + Background Checks for Badging/Security Clearances (if applicable) Founded in 1937, Hensel Phelps specializes in building development, construction and facility services in markets ranging from aviation to government, commercial, transportation, critical facilities, healthcare and transportation. Ranked #1 in aviation and #6 overall general contractor in 2024 by BD+C, Hensel Phelps is one of the largest employee-owned general contractors in the country. Driven to deliver EXCELLENCE in all we do and supported by our core values of Ownership, Integrity, Builder, Diversity and Community, Hensel Phelps brings our clients' visions to life with a comprehensive approach that begins with innovative planning and extends throughout the life of the property. **Position Description:** Laborers have general responsibility to provide support and assistance to the other skilled crafts working on the project. Laborers employed by Hensel Phelps provide support for the form carpenters and for the concrete operation in general, ironworkers/rodbusters involved in installing reinforcing steel, and masons involved in the installation of block and brickwork. This is a safety sensitive position. **Essential Duties:** + Preparation of areas for the placement of concrete involves final excavation of dirt and rock and fine grading for floor slabs. This work involves shoveling for extended periods of time. + Assembly of concrete forms, laborers are required to lift form prefabricated metal form panels and assist in their placement. + Handle the concrete bucket suspended from a crane that transfers the concrete from the concrete truck to the placement area. After the concrete is poured from the bucket, laborers muck the concrete in slabs to spread it evenly. + After the concrete has cured, the laborers assist in stripping the concrete forms and transporting them for storage. + Assist concrete finishers in moving power trowels and power screeds used to finish the concrete surface. + Support of block masons installing masonry work by handling and transporting bags of cement, lime, sand, and grout. This includes stocking blocks and bricks. + Assist carpenters in handling and setting door frames. This entails transporting the door frames from the storage area to the work areas and stacking the door frames where needed. + Load, unload, and identify building materials, machinery, and tools. Distribute site materials to the appropriate locations, according to project plans and specifications. Responsible for ensuring that all materials are properly distributed, and the site is swept and well maintained. + Promote a safe work environment and communicate jobsite hazards. This includes helping to secure the jobsite at the end of business each day and verifying that all site materials are properly stored. **Position Qualifications:** + High School Diploma or GED. + Valid Driver's License. + Follow safe work practices in accordance with the Hensel Phelps safety and health program. + Must be able to take initiative and ask questions. + Possess a keen attention to detail and be able to follow instructions. + Workers must provide their own safety footwear. + Must be able to communicate effectively and professionally with co-workers and stakeholders. + Strong mathematical reasoning and quantitative skills. + Must be reliable and punctual. This includes having reliable transportation and consistent work attendance. **Preferred Qualifications:** + Experienced in construction layout, blueprint reading and shop drawing reading + OSHA 10 Certification + CPR & First Aid Certification **Physical Work Classification & Demands:** - Heavy Work. Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects. - The individual in this position will periodically walk, kneel, sit, crouch, reach, stoop, read/see, speak, push, pull, lift, stand, and finger/type. The frequency of each action varies by workflow and field activity. - Walking - The person in this position needs to frequently move about the jobsite. - Sometimes operates a computer or tablet and other office machinery, such as a calculator and phone. - The person in this position frequently communicates with employees and external stakeholders regarding a variety of topics related to office and field administration. - Constantly reads written communications and views mail submissions. Will also need to read and understand blueprints, load charts, and take/verify field measurements. - Climbing - Ascending or descending ladders, stairs, scaffolding and ramps at various heights. - Working from heights - the person must be comfortable and able to work from heights for extended amounts of time. - Balancing - Ability to maintain body equilibrium to prevent falling and to walk, stand or crouch. - Stooping - Bending the body downward and forward by the spine at the waist. - Reaching - Extending hand(s) and arm(s) in any direction for various lengths of time. - Grasping - Needs to apply pressure to an object with fingers and palm regularly. - Visual acuity and ability to operate a vehicle as certified and appropriate. - Occasionally exposed to high and low temperatures. - Frequently exposed to noisy environment and outdoor elements such as precipitation and wind. - Use of hands and wrists with various tools. - Prolonged use of jackhammer and pavement breaker. - Use of wheelbarrows and brooms. - Repetitive use of hands and wrists using power, rotational, and vibration tools including prolonged use of jackhammers and pavement breakers. - Tolerate legally permissible exposure to dusts and chemicals, such as cement dust, solvents, and curing compounds. - The person must be able to safely wear a respirator and is able to pass applicable medical and fit testing examinations. - Must be able to hear commands from supervisors and back-up safety alarms on equipment **Benefits:** Hensel Phelps provides generous benefits for hourly craft professionals. This position is eligible for medical insurance, life insurance, accidental death & dismemberment, long-term disability, 401(K) retirement plan, and our employee assistance program (EAP). We also believe in the importance of taking time to recharge. As a result, hourly employees earn one hour of paid time off for every 18.75 hours worked during the year, up to a maximum of 80 hours (10 days) per year. After one (1) year of employment with at least 1,000 hours of service, employees may apply for Core Employee Status. Once an employee becomes a Core Employee, Hensel Phelps will begin paying 100% of the cost for family medical insurance coverage. **Equal Opportunity and Affirmative Action Employer:** Hensel Phelps is an equal opportunity employer. Hensel Phelps is committed to engaging in affirmative action to increase employment opportunities for protected veterans and individuals with disabilities. Hensel Phelps shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Meadow Gold is a farmer-owned brand of Dairy Farmers of America (DFA), a dairy marketing cooperative owned by more than 12,500 family farmers.Our mark matters and it represents the wholesomeness of dairy that we share with our communities and loved ones. DFA manufactures a variety of dairy products, including cheese, butter, fluid milk, ice cream, dairy ingredients and more, under well-known and established regional brands. Our fingerprints touch thousands of brands across the marketplace, and we're passionate about delivering the simple pleasures of dairy to people everywhere, straight from our family farm-owners. At Meadow Gold, we create healthy and nutritious products and are proud to provide families with fresh, delicious dairy. By joining DFA, you can help us continue to make a difference that matters. We care deeply about the well-being of our neighbors and friends, and we celebrate the diversity of our company and our world. It takes an incredible team to deliver the goodness of dairy and enrich our communities - come join us! Compensation: $26.37 + additional wage increases based upon achieving specific competencies Production Operators perform job duties within the manufacturing environment to provide relief forplanned (vacation, break) and unexpected absencesto ensure the continual production of product. This is a regular, full-time position, working at least 40 hours a week. Sunday through Saturday - Hours vary. BENEFITS: * Competitive pay * Comprehensive healthcare benefits * Union pension plan and 401(k) * Paid vacation and holidays * Career growth opportunities - we promote from within! * Service recognition and employee rewards * Employee referral program Job Duties and Responsibilities: * Clean, set-up, operate, and monitor equipmenton the production line * Ensure that the proper materials are used for each product being produced * Complete all required documentation and quality checks * Record and document all production runs, downtime, weights, code dates, and label verifications * Review charts, screens, quality check sheets, and specifications that are in both hard copy and electronic format * Perform cleaning and sanitation tasks on equipment in both manual and automated capacities * Prepare equipment for next run to include size changes as needed * Troubleshoot and resolve basic to moderate operating difficulties * Maintain communication with other departments, supervisor, and employees and notify them of any problems and/or concerns that may restrict the efficiency of production * Ensure all paperwork is filled out in a clear, legible, and accurate format and completed with required information. Ensure all required information is documented in accordance with SOP's * Review process data and equipment performance data to improve quality, throughput, and troubleshoot * Report any food safety and food quality related issues to management immediately * Maintain safe working conditions for employees and compliance with all state and federal regulations regarding health and safety issues * Follow all DFA good manufacturing practices (GMP) and work in a manner consistent with all corporate regulatory, food safety, quality, and sanitation requirements * The requirements herein are intended to describe the general nature and level of work performed by employee, but is not a complete list of responsibilities, duties, and skills required.Other duties may be assigned as required. * High school diploma or GED preferred * Must be able to add, subtract, multiply and divide in all units of measurement, using whole numbers, common fractions, and decimal * Must be able to pass all pre-employment screenings including drug, background and criminal checks * Must be able to push, pull, stand, walk, climb, crouch and lift up to 50 pounds * Must be able to work in a fast-paced environment * Must be able to be able to work in a wet environment * May have some exposure to dust, fumes and cleaning chemicals * Must be willing to work flexible hours including overtime as required, occasional weekends and holidays An Equal Opportunity Employer Salary: 25.87

Job description: Support the mechanic shop which includes sandblasting; cleaning of parts, shop and equipment in the mechanic area. This position is responsible for building crates and crating L&H parts for shipment. Other jobs and duties as need for special projects. Formal Requirements and Certifications of Job - Required Driving record that is acceptable to our insurance 18 years or older Self starter Attention to detail for crating parts Highly motivated and have a desire to learn Ability to operate or learn to operate various forklifts Good Communication both written and verbal Strong commitment to Safety of self and others Team player Special Demands Lift or carry 60lbs We conduct pre-employment drug testing, functional job analysis and a background check “Equal Opportunity Employer: all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.”

Our client, a leading organization in the industrial sector, is seeking a Laborer to join their team. As a Laborer, you will be part of the operations supporting steel handling and site organization. The ideal candidate will demonstrate reliability, self-motivation, and a strong work ethic, which will align successfully in the organization. **Job Title:** Laborer **Location:** Gillette, WY **Pay Range: DOE** **What's the Job?** + Reading engineering prints and drawings with accuracy + Using specialty measuring tools such as tape measures and micrometers + General cleanup and maintenance tasks + Light to medium lifting of lumber, dunnage, and miscellaneous steel items (typically under 50 lbs) **What's Needed?** + Ability to safely lift up to 50 lbs + Reliable and self-motivated + Willingness to work outdoors and perform physical tasks + Familiarity with reading engineering prints/drawings + Organized and detail-oriented approach to work **What's in it for me?** + Opportunity to gain valuable hands-on experience in a dynamic environment + Potential for temp-to-hire employment + Work in a supportive team environment + Develop skills in steel yard operations and measurement tools + Be part of a company that values safety and reliability **Upon completion of waiting period associates are eligible for:** + Medical and Prescription Drug Plans + Dental Plan + Supplemental Life Insurance + Short Term Disability Insurance + 401(k) If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! **About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells.** _ManpowerGroup (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands -_ **_Manpower, Experis, Talent Solutions, and Jefferson Wells_** _-_ creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent. ManpowerGroup is committed to providing equal employment opportunities in a professional, high quality work environment. It is the policy of ManpowerGroup and all of its subsidiaries to recruit, train, promote, transfer, pay and take all employment actions without regard to an employee's race, color, national origin, ancestry, sex, sexual orientation, gender identity, genetic information, religion, age, disability, protected veteran status, or any other basis protected by applicable law.

Ash Grove Cement, a CRH company, provides Portland and masonry cements to help build the foundation and infrastructure for the world around us. We ship millions of tons of cement from our plants and network of terminals located across North America. When you work for Ash Grove, you are connecting to something bigger. We stand together to reinvent the way our world is built. Join our team and help Ash Grove build America. Position: Laborer Reports to: Production Superintendent Shift: Rotating 12 Hour Pay: $22.57; this is a collective bargaining position At Ash Grove Cement, people are our first priority. We offer a complete benefits package to include: * Health Insurance * Dental Insurance Vision Insurance * 401k with company match and profit-sharing * Paid Time Off, Paid Holidays * Tuition Reimbursement * Employee Assistance Program * Disability Pay * Life Insurance * Growth Opportunities and more! What you'll be contributing: * Promote and follow all plant safety guidelines. * Performs general clean-up duties around the plant including sweeping floors and cleaning up spills around plant machinery and equipment. * Replaces brick in the kiln and cooler, and performs chain work and castable pours. * Cleans and bags dust collectors. * Sorts and adds mill balls (raw and finish) as needed. Cleans division and discharge grates. * Hauls dust (CKD) as directed using mobile equipment. * Load CKD trucks for customers. * Performs general maintenance and construction work including, but not limited to, concrete pours, wood construction, wire pulling, painting, minor equipment repair, etc. * Unplugs chutes, feeders, cooler, crushers, drags and screws, and air slides. * Performs duties for other plant employees as vacation relief. * Additional duties as assigned by the supervisor To succeed in this position, you will need: * High school graduation or equivalent is required * Ability to read, write and understand warning labels, instructions, signs, etc. * Willingness to learn, training will be provided. * Ability to successfully pass Ash Grove's Essential Function Test. * Ability to safely and effectively operate a truck, dust truck, case loader, various forklifts, RT-80 forklift, sweeper, hyster, shovel, broom, wheelbarrow, several sizes of air hammers, brick saw, skill saw, port-a-power, hammers weighing up to 16 pounds, pry bar, poker, water hose, air hose, air lance, screwdriver, wrenches, welders, bricking machine, paintbrush, and related equipment. What to expect in a cement environment: Work to be performed in a shop environment as well as outdoor exposure throughout the plant. Mild exposure to cement dust, heat, cold, and noise requires compliance with specified safety guidelines and procedures. Exposure to high elevations of up to 250 feet in height. Exposure to all weather conditions. Normal operation of mobile equipment may result in jarring and vibratory exposure. What's next for you? We provide stability and advancement opportunities across North America. Use our tuition reimbursement program to help you meet your career goals. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. The employee will be required to follow all job instructions of his/her supervisor and to perform other work assignments related to plant operations that are not inconsistent with the current labor contract, past practices, or safety policies. What CRH Offers You * Highly competitive base pay * Comprehensive medical, dental and disability benefits programs * Group retirement savings program * Health and wellness programs * A diverse and inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Ash Grove Cement, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability--If you want to know more, please click on this link. Date: Nov 1, 2025

We're looking for multiple Production Laborers to join our production team in Casper, Wyoming. In this position, you'll support daily manufacturing operations by running and overseeing equipment that winds plastic conduit onto reels. Your work will directly contribute to producing high‑quality products through careful monitoring, inspection, and efficient workflow management. **Location:** Casper, Wyoming **Pay:** $18/hr **Shifts:** 12‑hour shifts (2‑2‑3 schedule) + 7 AM - 7 PM + 7 PM - 7 AM **Key Responsibilities:** + Cut conduit using basic hand tools and approved power tools + Operate equipment to ensure conduit is wound evenly and consistently onto reels + Verify packaging and labeling accuracy before final inspection + Maintain quality standards by identifying and reporting any product irregularities + Inspect finished goods using standard measuring tools and devices + Keep work areas clean, organized, and production‑ready **Qualifications:** + At least 6 months of experience in a production or manufacturing environment + Comfortable working around industrial machinery and fast‑paced operations + Basic understanding of machine operation, packaging processes, and common hand tools **Job Type & Location** This is a Contract to Hire position based out of Casper, WY. **Pay and Benefits** The pay range for this position is $18.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Casper,WY. **Application Deadline** This position is anticipated to close on Jan 2, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Salary: $19-23/hr. Depending on experience With close supervision, ensure safe operations, maximum production quantity and quality, while supporting the policies, goals, and objectives of the company. We are currently seeking workers to be flexible and work in different roles based on the needs of the business. The position will report to the site management. Essential Duties/Responsibilities Performs general labor tasks at work site including shoveling sand. Complete pre-shift equipment inspections and basic maintenance on equipment as needed. Works safely, adheres to health and safety rules and uses appropriate PPE. Follows directions and completes tasks in a timely manner. Assists with railcar movement to assist with loading and unloading of incoming product. May operate equipment in a safe and efficient manner ensuring maximum equipment health and productivity. Has a strong understanding of the work they are assigned to and requires minimal supervision on how to perform work correctly. Understands and performs basic equipment maintenance as required. Performs housekeeping duties and cleans around plant equipment on a daily basis. Other responsibilities as assigned. Minimum Qualifications (Knowledge, Skills, and Abilities) Ability to work outdoors in all weather conditions (heat, cold, rain, wind) for extended periods of time. Must be willing to work any assigned shift, overtime, weekends, and holidays. The plant has 24 hour/7day operation. Some background in operating heavy equipment helpful. Must have a collaborative attitude and willingness to perform any work that is required. Ability to use basic hand and power tools. Basic operating knowledge of construction equipment, preferred. Must be able to read and be proficient with English and simple math. Basic computer skills helpful. Must be able to communicate effectively, using both written and spoken forms of communication. Must be a self-starter and be able to work with close supervision. Must be authorized to work in the U.S. on a full-time basis and be at least 18 years of age. Benefits offered Highly competitive pay Health insurance, including medical, dental and vision options 401(k) with employer match Paid time off benefits Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the functions. Lifting, carrying, reaching, pushing, and/or pulling; climbing and balancing; frequent stooping, kneeling, crouching, and/or crawling; and significant finger dexterity necessary 50 pounds of weight from 33% - 66% of the time (2.5 - 5.5+ hrs./day) Personal Protective Equipment: Safety glasses, hard hat and steel toe boots must be always worn. Hearing, respiratory and/or fall protection equipment must be worn when required. #ZR Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. Dietzler Companies is an equal opportunity employer; we are committed to creating a diverse environment and are proud to be an equal opportunity employer. All qualified applicants and employees will receive consideration for employment opportunities without regard to race, color, religion, gender, gender identity, or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics. Dietzler is also committed to compliance with all fair employment practices regarding citizenship and immigration status. Dietzler is a drug-free workplace and complies with ADA regulations as applicable.

Salary Description $19-24/HR

Duties And Responsibilities Perform support work and provide assistance to other trades (plumbers, electricians, painters, carpenters, etc.) including site preparation, delivery of supplies, materials and equipment, and site cleanup. Perform and assist with a variety of skilled technical work (e.g. masonry, asbestos abatement and mold remediation, demolition, concrete, construction site preparation, etc.). Operate a variety of equipment including manual, power, and heavy equipment (e.g. bucket truck, forklift, Grad-All, loaders, dump truck, roll-off trucks, snow removal equipment, pressure washers, chainsaws, etc.) to perform campus operational, renovation, construction, and maintenance work. Operates vehicles and specialized equipment, such as trucks, GradAll, forklift, snow removal equipment, Roll off trucks, loaders, backhoes, and mowers in support of renovation, construction, repair, and maintenance of campus buildings, streets, and grounds. Inspect, repair, and perform preventative maintenance on roof membranes and roof drainage systems to prevent damage from water and weather exposure. Institute necessary steps to confine hazards and/or protect building occupants when suspected hazardous materials are encountered on any maintenance, alteration, repair or renovation job in progress including abating small areas of asbestos or mold containing materials using established removal policies and procedures. Perform and assist with snow removal operations, waste management operations (landfill, recycling, e-waste), stormwater compliance operations. Support large campus activities like sports, concerts, and other significant University events. Physical Demands This position requires the ability to: position self to work in and lift objects from low positions, in tight spaces, along scaffolds, stairs, roofs, and ladders; and to traverse long distances. Position requires the transport of heavy materials and equipment. Work areas include roofs, poles, manholes, overhead hatches and other difficult access locations. Working conditions include but are not limited to exposure to temperature extremes and inclement weather; working in/around fumes, dust, noise, and research-related activities; and working around equipment, machinery, and site conditions typical of a construction environment. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodation. The requirements listed above are representative of the knowledge, skill, and/or ability required.

Employment Offers are Contingent upon Successful Completion of: Verification of Work Authorization and Employment Eligibility Substance Abuse Screening Physical Exam Background Checks for Badging/Security Clearances (if applicable) About Hensel Phelps Founded in 1937, Hensel Phelps specializes in building development, construction and facility services in markets ranging from aviation to government, commercial, transportation, critical facilities, healthcare and transportation. Ranked #1 in aviation and #6 overall general contractor in 2024 by BD+C, Hensel Phelps is one of the largest employee-owned general contractors in the country. Driven to deliver EXCELLENCE in all we do and supported by our core values of Ownership, Integrity, Builder, Diversity and Community, Hensel Phelps brings our clients' visions to life with a comprehensive approach that begins with innovative planning and extends throughout the life of the property. Position Description: Laborers have general responsibility to provide support and assistance to the other skilled crafts working on the project. Laborers employed by Hensel Phelps provide support for the form carpenters and for the concrete operation in general, ironworkers/rodbusters involved in installing reinforcing steel, and masons involved in the installation of block and brickwork. This is a safety sensitive position. Essential Duties: Preparation of areas for the placement of concrete involves final excavation of dirt and rock and fine grading for floor slabs. This work involves shoveling for extended periods of time. Assembly of concrete forms, laborers are required to lift form prefabricated metal form panels and assist in their placement. Handle the concrete bucket suspended from a crane that transfers the concrete from the concrete truck to the placement area. After the concrete is poured from the bucket, laborers muck the concrete in slabs to spread it evenly. After the concrete has cured, the laborers assist in stripping the concrete forms and transporting them for storage. Assist concrete finishers in moving power trowels and power screeds used to finish the concrete surface. Support of block masons installing masonry work by handling and transporting bags of cement, lime, sand, and grout. This includes stocking blocks and bricks. Assist carpenters in handling and setting door frames. This entails transporting the door frames from the storage area to the work areas and stacking the door frames where needed. Load, unload, and identify building materials, machinery, and tools. Distribute site materials to the appropriate locations, according to project plans and specifications. Responsible for ensuring that all materials are properly distributed, and the site is swept and well maintained. Promote a safe work environment and communicate jobsite hazards. This includes helping to secure the jobsite at the end of business each day and verifying that all site materials are properly stored. Position Qualifications: High School Diploma or GED. Valid Driver's License. Follow safe work practices in accordance with the Hensel Phelps safety and health program. Must be able to take initiative and ask questions. Possess a keen attention to detail and be able to follow instructions. Workers must provide their own safety footwear. Must be able to communicate effectively and professionally with co-workers and stakeholders. Strong mathematical reasoning and quantitative skills. Must be reliable and punctual. This includes having reliable transportation and consistent work attendance. Preferred Qualifications: Experienced in construction layout, blueprint reading and shop drawing reading OSHA 10 Certification CPR & First Aid Certification Physical Work Classification & Demands: • Heavy Work. Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects. • The individual in this position will periodically walk, kneel, sit, crouch, reach, stoop, read/see, speak, push, pull, lift, stand, and finger/type. The frequency of each action varies by workflow and field activity. • Walking - The person in this position needs to frequently move about the jobsite. • Sometimes operates a computer or tablet and other office machinery, such as a calculator and phone. • The person in this position frequently communicates with employees and external stakeholders regarding a variety of topics related to office and field administration. • Constantly reads written communications and views mail submissions. Will also need to read and understand blueprints, load charts, and take/verify field measurements. • Climbing - Ascending or descending ladders, stairs, scaffolding and ramps at various heights. • Working from heights - the person must be comfortable and able to work from heights for extended amounts of time. • Balancing - Ability to maintain body equilibrium to prevent falling and to walk, stand or crouch. • Stooping - Bending the body downward and forward by the spine at the waist. • Reaching - Extending hand(s) and arm(s) in any direction for various lengths of time. • Grasping - Needs to apply pressure to an object with fingers and palm regularly. • Visual acuity and ability to operate a vehicle as certified and appropriate. • Occasionally exposed to high and low temperatures. • Frequently exposed to noisy environment and outdoor elements such as precipitation and wind. • Use of hands and wrists with various tools. • Prolonged use of jackhammer and pavement breaker. • Use of wheelbarrows and brooms. • Repetitive use of hands and wrists using power, rotational, and vibration tools including prolonged use of jackhammers and pavement breakers. • Tolerate legally permissible exposure to dusts and chemicals, such as cement dust, solvents, and curing compounds. • The person must be able to safely wear a respirator and is able to pass applicable medical and fit testing examinations. • Must be able to hear commands from supervisors and back-up safety alarms on equipment Benefits: Hensel Phelps provides generous benefits for hourly craft professionals. This position is eligible for medical insurance, life insurance, accidental death & dismemberment, long-term disability, 401(K) retirement plan, and our employee assistance program (EAP). We also believe in the importance of taking time to recharge. As a result, hourly employees earn one hour of paid time off for every 18.75 hours worked during the year, up to a maximum of 80 hours (10 days) per year. After one (1) year of employment with at least 1,000 hours of service, employees may apply for Core Employee Status. Once an employee becomes a Core Employee, Hensel Phelps will begin paying 100% of the cost for family medical insurance coverage. Equal Opportunity and Affirmative Action Employer: Hensel Phelps is an equal opportunity employer. Hensel Phelps is committed to engaging in affirmative action to increase employment opportunities for protected veterans and individuals with disabilities. Hensel Phelps shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

WORK SCHEDULE: 1st Shift: Monday-Thursday 5:00am-3:00pm 2nd Shift: Monday- Thursday 3:00pm- 1:00am PRODUCTION ASSEMBLER I The Assembler I is responsible for maintaining accuracy, quality, and efficiency while performing light assembly duties and production tasks. The position reports to the Production Supervisor at Milwaukee Tool. Essential Duties & Responsibilities: Light assembly and packaging of product General warehouse duties: stacking, moving, arranging product Maintains expected productivity output levels and completes assignments as scheduled Builds assemblies to quality standards and print or work order specifications Follows verbal and written procedures including when modified by a Lead or Supervisor Maintains a clean and organized work environment including after task clean up, returning tools to designated locations and swept floor Flexibility in daily tasks including rotating positions and changing work stations Possibly operating minor machinery or equipment to aid in production processes Adheres to IB implemented safety standards including (PPE), work practice controls, and OSHA guidelines Is willing to learn new tasks, procedures and assemblies as needed Listens, understands and follows instructions while learning new assignments Recognizes unusual circumstances and asks questions to Team Leads when necessary Requests are completed with a good attitude and by needed deadlines May be assigned special projects and other duties as Skills & Qualifications: Possess manual dexterity and good coordination Must have good oral and written communication skills Possess basic reading, writing, and math skills (including adding, subtracting, calculating percentages, converting minutes to hours, and performing basic Algebra) Possess necessary basic computer skills for accessing and printing documents/labels Possess ability to resolve minor problems, recognize normal and unusual situations Ability to work with manual and/or power equipment and tools Possess proven mechanical ability or aptitude Is able to follow assembly simple production diagrams Demonstrates strong multitasking skills in a fast paced environment Accuracy and attention to detail required Coachable and applies instruction immediately Maintains a positive attitude and remains flexible to changing work environment Education and/or Experience: HS diploma or equivalent (GED) required Previous production, assembly or packaging related experience preferred Has worked independently and as part of a team Basic English skills to understand quality, safety, work instructions, personnel information, etc. Physical Demands & Work Environment: The employee may be required to frequently lift, carry, push or pull up to 50 pounds Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus Prolonged standing of eight or more hours a day Frequent walking Occasional bending, crouching, twisting, reaching Employees may be required to wear the proper Personal Protective Equipment (PPE) in certain work cells Milwaukee Tool is an equal opportunity employer.

Specific Role: Laborers are key members of EMIT's manufacturing team, with two openings available: Line Load and Line Unload. These roles ensure that parts are safely and efficiently handled as they move through our production line. Line Loaders are responsible for preparing and placing parts onto the line for coating, while Line Unloaders safely remove coated parts, protect them with proper materials, and prepare them for the next stage of production. Both positions require attention to detail, urgency, and a commitment to maintaining a clean and safe work environment. Key Accountabilities (Line Load): * Safely load parts onto the line using proper rigging. * Perform visual inspections for scratches, rust, spatter, or debris before coating. * Set aside parts that do not meet quality standards. * Maintain a clean, organized, and hazard-free work area. Key Accountabilities (Line Unload): * Safely unload finished coated parts from the automated powder line. * Stack and protect parts with foam or other materials to prevent damage during transport. * Remove used hooks and place them in designated bins. * Transfer finished products to the landing zone for the next production step. * Maintain a clean, organized, and hazard-free work area. Qualifications: * High school diploma or equivalent preferred. * Previous manufacturing or labor experience a plus, but not required. * Strong attention to detail to ensure product quality. * Willingness to work with urgency to meet production demands. * Dependable, self-motivated, and able to work both independently and as part of a team. * Commitment to using proper PPE and following all safety protocols. Physical & Safety Requirements: * Ability to lift up to 75 lbs. on a repeated basis. * Comfortable standing, walking, and moving for the duration of the shift. * Always use proper PPE when required. * Follow safety protocols when handling tools and materials. We are an equal opportunity employer and welcome candidates from all backgrounds. Pay Range $18-$20 USD

Looking for a career working on challenging projects while traveling to different parts of the US. Preload is the leader in the design and construction of our industry, and we are looking for candidates with long-term potential to join our team and grow with us. Pay starts at $20+/hr plus per diem and benefits. What you will be doing: Working on a high-performing team building landmark water tanks Building your trade skills through the multiple skills we use every day Team members most successful in this role are skilled in: Wire winding/shotcrete Carpentry Placing reinforcement Placing/finishing concrete Dome scaffolding install/dismantle Tank erection How you will be doing it: Here at Preload we value safety, passion, integrity, reputation, ingenuity, and teamwork (SPIRIT). And we promote those who bring their best every day! Great safety records and innovative, high-quality work is how we built our reputation. You will be the right fit if you are excited to work hard and solve problems. Preload is an Affirmative Action, Equal Opportunity Employer - Minorities/Female/Disabled/Veterans committed to the principle of Diversity and is particularly interested in receiving applications from a broad spectrum of professionals for each open opportunity. Preload encourages minorities, females, protected veterans, individuals with disabilities, and other members of protected classes to apply for positions.

At LSCG, we take a people-first approach to construction. We know communications infrastructure construction isn't just about fiber and towers. It's about collaboration and honesty. At LSCG, a Full Circle Fiber Partners company, we bring more than steel toes and hard hats to the job site - we bring teamwork and integrity, and we do everything with a mindset of safety. Just as a well-placed network connects a community, a well-organized team powers all projects to success. Service excellence, pioneering experience, and a passion for what we do - that's LSCG. LSCG is a dynamic organization of diverse, customer-focused people committed to our Core Values: Service Excellence, Accountability, Safety, Integrity, Fairness and Mutual Respect. We are looking for motivated and professional individuals to grow with our team. LSCG offers competitive wages and a comprehensive benefit package that includes health, dental, matching 401K and more. Job Summary As an Aerial Laborer, you are responsible for assisting the assigned crew by furnishing tools, materials, and supplies; cleaning work area, machines, and tools, holding materials or tools for other workers and performing traffic control duties. Requirements for an Underground Laborer: Pass a background check and drug test CDL Preferred Tasks Required for an Underground Laborer: Control traffic passing near, in, or around work zones. Clean or prepare construction sites to eliminate possible hazards. Signal equipment operators to facilitate alignment, movement, or adjustment of machinery, equipment, or materials. Read plans, instructions, or specifications to determine work activities. Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications. Measure, mark, or record openings or distances to layout areas where construction work will be performed. Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications. Tend to pumps, compressors, or generators to provide power for tools, machinery, or equipment Erect or dismantle traffic barricades or other temporary structures for safety. Lubricate and clean machinery, equipment, or tools. Utilize machinery, such as a directional drill, to drill holes in a multitude of different types of dirt and clay. Knowledge Required of an Underground Laborer: Building and Construction- Knowledge of materials, methods, and the tools involved in underground construction for CATV telecommunications systems. Mechanical- Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Safety- Knowledge of relevant safety procedures in a construction setting. Disclaimer Statement This is not necessarily an exhaustive list of all responsibilities, duties, skills, efforts, requirements or working conditions associated with this position. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other or different tasks be performed as assigned. Requirements:

Direct Supervisor: Superintendent Qualifications: A laborer is responsible for performing tasks involving physical labor for heavy construction projects and demolition sites. This position also consists of operating hand and power tools of all types, cleaning and preparing sites, digging trenches, setting braces to support the sides of excavations, erecting scaffolding, cleaning up rubble and debris, and removing hazardous waste materials. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: ESSENTIAL JOB REQUIREMENTS Knowledge of: materials, methods, and appropriate tools to construct objects, structures, and buildings principles and processes for providing customer service and evaluating customer satisfaction machines and tools including their designs, uses and benefits safety best practices Skills: clean and prepare construction sites by removing debris and possible hazards load or unload building materials to be used in construction build or take apart bracing, scaffolding, and temporary structures dig trenches, backfill holes, or compact earth to prepare for construction operate or tend equipment and machines used in construction follow construction plans and instructions from supervisors or more experienced workers using mathematics to accurately perform calculations common to the construction industry basic reading, writing, and communications skills Abilities: multi-task and prioritize duties in a fast-paced environment exert muscle force repeatedly or continuously over time apply commonsense understanding to carry out oral and written instructions take and follow directions and feedback define problems, collect data, establish facts, and draw valid conclusions operate successfully in a team environment develop constructive and cooperative working relationships with others Other: strong work ethic strong attention to detail must have a valid driver's license and good driving record other duties as assigned Education Requirements: 0-1 Years construction experience. High school diploma or equivalent. Relevant work experience may be substituted for education requirements. Tool Requirements: Applicants are required to have in their possession and maintain their own tools relevant to their job. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: good eye-hand coordination including usage of one or both left and right hands/arms to work bilaterally and/or independently to grasp, manipulate, or assemble objects; normal or correctable to normal vision and hearing; ability to kneel, crouch, climb, balance, crawl, bend, stretch, twist, reach, stand, sit and walk on frequent basis; ability to lift and carry up to 50 pounds on frequent basis. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job: occasional difficult public contact; frequent exposure to variety of weather conditions, vibration, noise, fumes, dust, and moving mechanical parts. FLSA Status: This position is non-exempt and eligible for overtime pay. Wages/Benefits: Successful applicant will be paid an hourly wage with actual starting wage dependent on his/her qualifications, experience, and capabilities. Some benefits are available to full-time, regular employees after successful completion of the Introductory Period and these benefits will be explained at time of interview.

Job Description Base Pay $14.50 to $15.50 plus $3 an hour in tips!!!! PTO | Insurance | 401K | Free Meals | Flexible Schedules | HSA Our locally owned and operated QDOBA is looking to add hospitality-oriented individuals to our team. As a Team Member, you will bring outstanding energy and provide a welcoming environment for each of our guests while preparing their favorites. FULL-TIME & PART-TIME AVAILABLE Schedule Flexible schedule Benefits Medical insurance Paid time off Dental insurance 401(k) Vision insurance Employee meals Health savings account

Line Operator - Day Shift $21.00 - $24.00 per hour Work HALF of the month, having every other weekend as 3-day weekend! Higher starting wage will be considered for acceptable manufacturing experience. Increases based on successful completion of Employee Qualifications Logs BRIEF JOB DESCRIPTION: • The Line Operator will work as part of a team to support one of the production lines with a focus on operating, caring for, and maintaining the extrusion equipment, and improving the machines performance. • Key activities include process monitoring, minor maintenance, troubleshooting, and process improvement. • The Line Operator reports to the Production Supervisor or Lead Operator at the manufacturing facility. RESPONSIBILITIES MAY INCLUDE: • Adjust controls to draw product into specified diameter. • Assist with changeovers on extrusion machines according to production line changes. • Clean work areas. • Load machine hoppers with mixed materials. • Measure and examine extruded products for defects, and to check for quality conformance to specification; adjust controls as necessary to alter product. • Reel extruded products into rolls of specified lengths. • Start machines and set controls to regulate vacuum, air pressure, sizing rings, temperature, and synchronize speed of extrusion. • Document machine operating conditions and product measurements • Report major process change to Production supervisor. • Package product and move to staging area for quality control inspection. • Performing other duties assigned by Production Supervisor • 12-hour shifts to include weekend work will be required • Accountable for understanding and putting into practice the SHE Principles. JOB REQUIREMENTS: • Preferred candidates must have a High School Diploma or GED equivalent. • Must have excellent communication skills. • Proficient with reading, writing, and basic math skills relating to the job, function or assignment. • Ability to use and interpret precision instruments, tools, machinery and equipment. • Must be able to work safely in a production environment; must be physically capable of performing job related tasks and job duties. • Good organizational skills- must have ability to determine priorities, manage time properly, and multi-task. • Adherence to Quality Policy and ISO 9001 Procedural requirements. • Work closely with quality assurance, shipping personnel, and production supervisor. • Initiative, adaptability, and communication skills are necessary for success in this position. • Must be a U.S. citizen or a non-U.S. citizen having legal status to reside and work in the U.S. for reasons other than practical training. • Regular, predictable, full attendance is an essential function of the job. PHYSICAL DEMANDS: • Specific visions abilities require by job include close vision, distance vision, peripheral vision, depth perception, the ability to adjust focus and distinguish color. • Walk, sit, climb, stoop, bend, kneel, balance, crouch or crawl, talk or hear. • Use hand to fingers, handle, or feel objects, tools and controls, reach with hands and arms, climb stairs or ladders. • Employee must be able to lift objects up to 50 lbs. • Ability to climb stairs and/or ladders. • Ability to stand and walk 8-12 hours per day. • Ability to wear PPE, including, but not limited to, hard hat, safety glasses and steel toe footwear that meets ASTM F-2413-2005 standards while in required locations. • The employee will be required to: read, communicate verbally and in written form, remember and analyze certain information, and remember and understand certain instructions or guidelines. • While performing the duties of this job, the employee may be required to stand, walk, and sit the employee is frequently required to use hands to touch, handle, and feel and to reach with hands and arms. • Ability to work in varying temperatures and inclement weather; during their shifts, excluding breaks. TRAINING: • The company provides training in safety, equipment operation, and quality requirements. TRAVEL REQUIREMENTS: • Travel is not usually required. Travel to other cities or manufacturing facilities may be necessary for training or benchmarking purposes. Safety is the most important part of all jobs within WL Plastics; therefore, candidates and employees must be able to demonstrate the ability to initiate, lead, and uphold safety policies, procedures, and housekeeping standards at all times.

Job DescriptionEnjoy three days off while keeping full time hours and benefits! offers very flexible scheduling with the ability to work up to 40 hours in a 4 day workweek! Weekend availability consisting of a Fridays, Saturdays and Sundays are a must. You don't have to work all of em', but we need your expertise during our busiest shifts. Starting at $16 per hour. Flexible scheduling. Full time and part time shifts are available. Free Shift Meal and Discounts on HuHot food items when you're not working. First Uniform is Free! No late nights-out by 10pm on weekdays and 11pm on weekends Cross-training opportunities and leadership programs to support every level of your career Other benefits such as medical, dental, vision and/or 401k are available based on time with the company and you average weekly hours. Responsibilities Assist in other side work as needed during service Help maintain a professional restaurant image and maintain restaurant cleanliness and appearance standards. Provide exceptional customer service at all times to our guests Follow all food safety standard guidelines in place at all times to ensure compliance with operational standards, our company policies, federal/state/local laws and ordinances Able to operate Kitchen Equipment Labeling food and ensuring proper rotation (FIFO) Assisting with production of online and to-go orders Maintaining a clean and organized work environment Personal Requirements Must have an Upbeat, outgoing and positive attitude Able to work positively in a fast paced environment Must be comfortable interacting with our guests Able to work effectively within a team Ability to be on your feet and alert for extended periods of time Ability to lift up to 35lbs as needed Continuous use of hands and arms as well as continuous bending, reaching and twisting Maintains a strong professional image and uniform standards