Line up worker jobs in Blaine, MN

ACTIVE CABINET PRODUCTION ASSEMBLER POSITION OBJECTIVE: Prepare bulk fiber optic cable for further assembly and splice a variety of fiber optic patch cords and panel assemblies while maintaining high-quality standards. POSITION RESPONSIBILITIES: Prepare a variety of fiber optic cables for further assembly steps: Read order instructions and review drawings to determine work steps. Follow process instructions and quality guidelines. Use small manual and power hand tools. Operate splicing equipment to fasten connectors to fiber optic cable. Maintain a clean working environment. Accepts work direction from supervisor, lead, engineer, and co-workers. Exceed and maintain labor requirements. Communicate within the group on workflow status. Perform miscellaneous tasks Be flexible and prioritize work orders. Crosstrain in all department work cells. Help instruct co-workers and subcontract personnel. Perform housekeeping duties. Maintain safety requirements. Identify worn tools and maintain tools in good working order. Work overtime when required. This description of duties is not intended to be all-inclusive or to limit the discretionary authority to assign other tasks of a similar nature and/or level of responsibility. COMPETENCIES: Attention to Detail- Working in a conscientious, consistent and thorough manner. Reviews own work for accuracy and completeness, identifying inconsistencies or discrepancies that indicate problems with the quality of work. Identifies main concepts and ideas when completing simple, straightforward tasks. Verifies the accuracy of details that are important to others. Concern for Safety- Identifying hazardous or potentially hazardous situations and taking appropriate action to maintain a safe environment for self and others. Applies health and safety regulations and policies that relate to own position. Maintains/updates knowledge of safety issues. Reports unsafe working situations to appropriate authorities. Fostering Communication- Listening and communicating openly, honestly, and respectfully with different audiences, promoting dialogue and building consensus. Listens/pays attention actively and objectively. Presents information and facts in a logical manner, using appropriate phrasing and vocabulary. Share information when requested. Communicate with others honestly, respectfully, and sensitively. Quality Focus- Follows up on procedures, ensures high-quality output, takes action to solve quality problems or notify others of quality issues. Describes the quality standards set by the organization. Follows the policies and procedures for quality set by the organization. Works at a level that typically meets quality standards set by the organization. Teamwork- Working collaboratively with others to achieve organizational goals. Deals honestly and fairly with others, showing consideration and respect for individual differences. Does own fair share of the work. Seeks assistance from other team members, as needed. Assists other team members. Shares all relevant information with others. HOURS OF WORK: Monday through Friday, 8-hour shift, (6 am to 6 pm) (With flexible start time) POSITION REQUIREMENTS: Ability to identify colors, and strong eye-hand coordination. General assembly experience, Ability to work in a fast-paced environment. Able to lift up to 40 lbs. Ability to work with a wide variety of part sizes and weights Extensive dexterity and hand, wrist, and arm movement Ability to read and understand written instructions, basic arithmetic skill. Continuous Improvement mindset Safety mindset BENEFITS for full time: Comprehensive Medical, Dental, and Vision benefits. 100% company paid Short-term and Long-term disability insurance coverage. 100% company paid Basic Life and Accidental Death and Dismemberment (AD&D) insurance coverage. 100% company paid Business Travel Accident (BTA) insurance. 100% company paid Employee Assistance Program (EAP). Additional voluntary benefits are offered. 401K plan: Maximum match is 4.5% of the first 6% of contribution. Employee Stock Purchase Plan: Clearfield's Time Off Policy includes Personal Time Off (PTO) beginning at three weeks annually. PTO is accrued on the first of the month starting on day of hire. In addition, nine paid holidays per year. HOURLY SALARY RANGE: Starting at $20.00, Bonus eligible An Offer of employment will be extended at a level consistent with the experience and qualifications of the candidate. This information reflects the anticipated salary range for this position at the time of posting. The salary range may be modified in the future and actual compensation may vary from the posting based on various factors such as geographic location, work experience, education and/or skill level.

rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** Operator Assembler I Position Summary The Operator Assembler I will be responsible for operating and tending manufacturing machines, per prescribed work instructions, to create parts or products. This position is also responsible for quality checks, assembly, packaging, labeling, and moving of product. 2nd shift schedule is Monday - Thursday 3:45pm - 1:45am Responsibilities Operator Assembler I Responsibilities: * Operate hand equipment and tools used in the assembly process * Ensure quality products are being produced by following work instructions and inspecting parts * Ability to use measuring equipment (gauge pins, calipers, tape measure) * Maintaining daily production rates * Read, understand, and follow work instructions and standard work Qualifications Operator Assembler I Position Requirements: * Knowledge of basic math concepts * Dexterity and hand and eye coordination * Ability to cross train in other areas of production when required * Attention to detail * Ability to work in a fast-paced team environment Operator Assembler I Perferred Requirements: * 1 year of manufacturing experience rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k)-retirement plan with employer match, profit sharing, short- term and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: * Onsite Clinic * Paid Parental Leave * Monthly Social Events * Annual Employee Appreciation Week * Volunteer Opportunities * Training and Development Opportunities * Tuition Reimbursement * Wellness Program Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $18.00 - USD $22.00 /Hr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard topublic assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

At Imagine we go beyond print to help our clients deliver game-changing visual communications from concept to delivery that set the standard for our industry. The first step in this process is hiring great employees! Our innovation teams are the most committed, highly experienced artisans in the business. We are committed to delivering high-quality marketing solutions, in every environment and campaign, helping our clients capture the heart, minds, and loyalty of their customers. For more than 30 years, The Imagine Group has established itself as one of the most influential and innovative visual communications companies in the industry. Join us and let's Imagine a better way together. Position Overview Under the direction of the Leads, Supervisors and/or Managers, Kitting & Assembly General Workers perform all activities to assemble a finished product, ensuring the highest quality product at the lowest possible cost, meeting customer specifications and delivery requirements, in accordance with company policies and procedures. Shift: Monday - Friday, 10:45pm - 7:15am Responsibilities • Demonstrate proficiency in all Kitting & Assembly level duties and responsibilities. • Assist Line Leads to supervise Kitting & Assembly lines in flow and work assignments. Assist Line Leads to keep lines moving as efficiently as possible without jeopardizing quality. • Aid Line Leads to ensure accuracy and proficiency on their Kitting line. • Perform line audits. • Report to Supervisor if issues occur regarding temporary workers or other employees • Contact Supervisor/Leads regarding issues with Kits. • Assist the Kitting line to ensure finished Kits are created on time. • Respect and cooperate with individuals and assist others in reaching objectives. • Follow all safety rules/regulations, company procedures and policies. • Implement work assignments within the most cost effectiveness and manufacturing efficiencies. • Make recommendations that best fit our process requirements. • Maintain cleanliness of equipment and work areas. • Continually strive to learn and improve all processes. • Other duties as assigned. Qualifications MINIMUM QUALIFICATIONS OF POSITION • High School Diploma or equivalent and/or equivalent work experience PREFERRED QUALIFICATIONS OF POSITION • Technical and interpersonal skills are helpful but not mandatory. KNOWLEDGE AND SKILLS • Basic mathematics skills include addition, subtraction, multiplication and division of whole numbers and fractions. • Ability to plan and give work direction effectively. • Technical knowledge of Imagine! Production processes helpful. • Strong problem solving, decision-making and organizational abilities. • Ability to interpret written instructions. • Multi-task and prioritize. • Knowledge of quality methods and techniques. WORKING CONDITIONS AND PHYSICAL REQUIREMENTS • Ability to lift, push and pull up to 35 lbs. • Ability to visually inspect all work for defects. • Frequent reaching, bending, climbing, kneeling, crouching, and stooping. • Manual dexterity for repetitive work. • Frequent walking and standing. • Chemicals: N/A • Travel: N/A Pay Range USD $17.00 - USD $19.00 /Hr. Pay Statement The national pay range for this role is listed above. The pay range may be slightly lower or higher based on the geographic location. The actual pay offered may vary based upon, but not limited to: education, skills, experience, proficiency, performance, shift and location. In addition to base salary, depending on the role, the total compensation package may also include participation in a bonus, commission or incentive program. Imagine offers benefits including medical, dental, and vision coverage, paid time off, disability insurance, 401(k) with match, life insurance and other voluntary supplemental insurance coverages, plus tuition assistance, caregiver leave, adoption assistance, and employer/partner discounts. EEO Statement The Imagine Group provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

**Department:** Production **Electric Machinery Company LLC, a division of WEG Electric Corp.** **Minneapolis, MN** General Labor / Stacker - 2nd shift** **Team: Lamination Team** ** The Stacker role is responsible for assembling laminated subassemblies for stator winding, pole winding, exciter winding and rotor assembly. **Skills Matrix:** The Stacker position is part of the Lamination Team skills Matrix. This position works as a team member utilizing and performing to the Lamination Team skills matrix, which outlines the comprehensive skills in the Lamination Team. **Major Areas of Accountability:** + Assembles spider, field poles, armature cores and rotors, including stacking, shrink fitting, grinding, welding, filling, pressing and torqueing. + Sets up and operates various machining equipment to perform milling, drill, taping, cutting and precision grinding. + Sets up and operates hydraulic presses. + Stacks laminations, places followers, drives rivets, drives cage and damper bars, presses laminations. + Reads prints and routing information to determine sequence and method of manufacturing. + Uses fixtures as necessary. + Does charting, maintains inventories of shelf life materials in stacking area. + Works in other areas of the Lamination Team skills matrix, may work in press set up and operation. + Demonstrates a commitment to Continuous Improvement by identifying opportunities in day to day work. + Performs to ISO 9001 Quality Standards and abides to OSHA and EPA regulations. **Knowledge/Skills/Abilities:** + High School degree or equivalent (preferred) with 1 year of related manufacturing experience (preferred). + Ability to obtain basic welding certificate. + Ability to perform basic match such as addition, subtraction, multiplication, division, fractions and decimals. + Ability to be certified in overhead crane, Jib crane and forklift operation. **Physical Requirements:** + Routinely lifts and moves objects up to 50 lbs. + Occasionally ascends/descends ladders and stairs. + Routinely works at heights or on platforms. + Occasionally positions self in various works spaces, including low, tight or confined spaces. + Occasionally remains in a stationary position, often standing or sitting for prolonged periods of time. + Routinely uses repetitive motions including the wrists, hands or fingers to operate machinery or tools. + Routinely moves from one work station to another to accomplish tasks. **Salary** Based on experience and qualifications **Pay Types** Voluntary weekend overtime. Saturday is paid at time and a half, Sundays are paid at double time! **Job Type** Monday - Friday, 2nd shift 3:30 p.m. - 12:00 a.m. Full-time (Union) **Benefits** + Medical, Dental & Vision Insurance eligible your 1st day on the job + 401K with Match 1st of the month following hire + Quarterly Bonus Program payout potential + Company paid Holidays (13) + Paid Time Off (PTO) accrued + Company paid Short & Long Term Disability + Company paid Life Insurance + Paid Birthday (use anytime throughout the year) + $6,000 annual Tuition Reimbursement program + Company provided tools + Uniforms (laundered), Safety Shoes & Glasses + Secure, onsite free parking

Job Description GENERAL DESCRIPTION Produce high-quality Concrete products with a focus on safety and efficiency. Salary range ($24.00-26.00). Based on experience. WHY WORK FOR US? At Wells, we empower our team members to deliver an exceptional client experience. Our employees are talented problem solvers that shine in preconstruction, engineering, operations, and project management. They bring innovative solutions that yield outstanding results. In the design and construction industry, we focus on honesty and hard work to build trust that lasts beyond individual projects. Our team is consistently working to improve building processes and raise industry standards. We meet our partners' needs through collaborative efforts that ensure safe and certain results, reducing risks along the way. Together, we help businesses and individuals succeed and change our communities for the better. WHAT WE HAVE TO OFFER Wells values our employees and is committed to providing a competitive and comprehensive benefits package. Please note that the benefits listed here are for non-union employees. Benefits for union employees are covered under separate collective bargaining agreements which can be obtained through their union business agent or their HR representative. Health, dental and vision insurance Paid premiums for short- and long-term disability, and life insurance Wellness Incentives Paid holidays Flex spending for medical and daycare Health savings account (HSA) 401(k) plan with profit sharing Access to Nice Healthcare Employee Assistance Program Paid Time Off (PTO) Wishbone Pet Insurance Critical Illness Benefit Plan Accident Insurance Plan Voluntary Hospital Indemnity Plan Other benefits include Health and Family Care leave for both union and non-union employees. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Work with co-workers to strip, set-up and pour the bed in a timely manner Work with the Quality Control Department to ensure optimal quality Take direction from their Team Leader and Supervisor Flexible to perform work in any area including Production, Yard, Patching and other areas as needed Maintain a safe environment and have good housekeeping skills while working Participate in Lean Manufacturing objectives and improves the efficiencies of the department Have knowledge of quality programs and be able to perform quality work Come to work with a good attitude and work the hours needed to fulfill the job requirements Knowledgeable of day-to-day tasks that are performed and are aware of what the next step is without being told Maintain a professional relationship with employees in the plant and office Support company policies and have a positive attitude while working EDUCATION, SKILLS, AND ABILITIES REQUIRED High School Diploma or GED Must have interpersonal communication skills to interact with co-workers, supervisors, and managers Must be able to solve problems quickly and efficiently General math skills and ability to read tape measure Ability to work with others to get the project completed efficiently and work independently when needed Knowledge of products the company uses, and which products would work best Understand and accept changes that are implemented to become Best in Class PHYSICAL REQUIREMENTS/ ADA ESSENTIAL FUNCTIONS Physically able to lift up to 75 lbs, occasionally Physically able to push, pull, lift, bend, climb, kneel, twist, squat, crawl and use hands/forearms repetitively and frequently Ability to move around for up to 12 hours per day Ability to work from ladders, scaffolding, swing stages and man lifts at various heights frequently WORKING CONDITIONS Moderate to high risk of exposure to unusual elements Moderate to high risk of safety precautions Moderate to high exposure to production environment Wet, hot, humid, and wintry conditions (weather related) (plant specific) Ability to work outside year-round (plant specific) This position profile identifies the key responsibilities and expectations for performance. It cannot encompass all specific job tasks that an employee may be required to perform. Employees are required to follow any other job-related instructions and perform job-related duties as may be reasonably assigned by his/her supervisor. Wells in an Equal Opportunity Employer, including Veterans and Individuals with Disabilities. Wells participates in E-Verify and will provide the federal government with your I-9 Form information to confirm you are authorized to work in the U.S.

Duties include assisting in installation, construction, and maintenance of overhead and underground electrical distribution lines and to ensure continuous electric service to utility customers. Requires working knowledge of the principles and practices of overhead and underground electrical distribution and transmission system construction and maintenance. Ability to obtain a class A Minnesota Commercial Driver's License with air brake endorsement within six months of employment, the ability to work outdoors with great physical exertion, the ability to lift up to 75 pounds, the ability to work around noisy equipment, on uneven terrain in fields and along roads with vehicular traffic. Experience in operating power operated equipment is beneficial. Electrical line technician certification is required. Full Benefits available. Submit resume and application by 12/15/2025 to ************************ or by mail to Shakopee Public Utilities, Attn: Human Resources, PO Box 470, 255 Sarazin Street, Shakopee, MN 55379-0470. Application form and job description are available on our web site at *************************

At Polaris Inc., we have fun doing what we love by driving change and innovation. We empower employees to take on challenging assignments and roles with an elevated level of responsibility in our agile working environment. Our people make us who we are, and we create incredible products and experiences that empower us to THINK OUTSIDE. In the Assembly Operator position you will perform a wide variety of tasks to prepare or build up vehicle parts, sub-systems, and components. You will install subsystems, parts, and components into a vehicle on a moving assembly line. You will also perform checks and inspections to ensure good quality. This position requires the use and operation of various power tools, hoists, and production equipment. Assembly Operators work in a repetitive, fast paced environment and participate in teams to improve processes. Please Note: This role is employed by Kelly Staffing Services Temp Agency at the Polaris Osceola location. This role is not eligible for full time Polaris benefits. After working through the temp agency for 90+ days and meeting all safety, quality and performance guidelines, this role may be eligible for full time conversion to Polaris. Schedule: 1st Shift: Monday - Thursday 6AM - 4:30PM Qualifications: 18 years of age or older Lift up to 40lbs, bend, twist, turn, kneel, squat, reach overhead, perform strong pinch and grip, push pull up to 100lbs, and stand/walk up to 10 hours per day. Legal authorization to work in the United States Successful completion of pre-employment background checks and drug screen Willing and able to work overtime Base Pay Range: $20.43 - $22.34 Applicants must be authorized to work for any employer in the U.S. Visa sponsorship will not be provided. To qualify for this position, former employees must be eligible for rehire, and current employees must be in good standing. We are an ambitious, resourceful, and driven workforce, which empowers us to THINK OUTSIDE. Apply today! At Polaris we put our employees first, by offering a holistic approach to their health and financial wellbeing. Polaris is proud to offer competitive compensation, including a market-leading profit-sharing plan that is fundamental to our pay-for-performance culture. At Polaris, employees are owners of the company through company contributions to our Employee Stock Ownership Plan and discounted employee stock purchases plan. Employees receive a generous matching contribution to 401(k), financial wellness education and consultation to plan for their financial future. In addition to competitive pay, Polaris provides a comprehensive suite of benefits, including health, dental, and vision insurance, wellness programs, paid time off, gym & personal training reimbursement, life insurance and disability offerings. Through the Polaris Foundation and our Polaris Gives paid volunteer time off, we support employees who actively volunteer their time, efforts, and passions to improve the health and wellbeing of the communities in which they live, play and work. Employees at Polaris drive our success and are rewarded for their commitment. About Polaris As the global leader in powersports, Polaris Inc. (NYSE: PII) pioneers product breakthroughs and enriching experiences and services that have invited people to discover the joy of being outdoors since our founding in 1954. Polaris' high-quality product line-up includes the Polaris RANGER , RZR and Polaris GENERAL™ side-by-side off-road vehicles; Sportsman all-terrain off-road vehicles; military and commercial off-road vehicles; snowmobiles; Indian Motorcycle mid-size and heavyweight motorcycles; Slingshot moto-roadsters; Aixam quadricycles; Goupil electric vehicles; and pontoon and deck boats, including industry-leading Bennington pontoons. Polaris enhances the riding experience with a robust portfolio of parts, garments, and accessories. Proudly headquartered in Minnesota, Polaris serves more than 100 countries across the globe. *************** EEO Statement Polaris Inc. is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law. Applicants with a disability that are in need of an accommodation to complete the application process, or otherwise need assistance or an accommodation in the recruiting process, should contact Human Resources at ************ or ****************************** . To read more about employment discrimination protection under U.S. federal law, see: Know Your Rights: Workplace Discrimination is Illegal (eeoc.gov) .

Job Description In a fast passed, team environment, works under direct supervision, performs basic and routine electrical/mechanical assembly and sub-assembly operations. Uses print specifications, wiring lists, written quality standards and verbal instructions to assemble, modify, rework or reassemble wiring units. Work is repetitious in nature and requires a significant amount of eye hand coordination and dexterity. Works with small hand tools and completes simple machining operations. Required to use measuring devices and apply basic math skills. 1.) Position Functions: Prepares work to be accomplished by reviewing assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials. Prepares sub-components for assembly by sorting, stripping, terminating or otherwise making them ready for further processing. Operates various hand tools and simple machining operations. Performs various tests for compliance to quality specifications. Rotates among different workstations as production needs require. Positions parts and subassemblies by using blueprints and/or reading measurements. Assembles components by examining connections for correct fit; fastening parts and subassemblies. Verifies specifications by measuring completed component. Conserves resources by using equipment and supplies as needed to accomplish job results. Is required to meet daily Quantity and Quality standards. Contributes to team effort by accomplishing related tasks as needed. Skill Sets: Education and/or Experience: High School diploma or General Education Degree (GED)required; and one to three months' of assembly/production experience. Language Skills: Ability to read and comprehend simple instructions and written quality standards. Must be able to learn to read and understand basic blueprint layouts. Ability to effectively communicate information in a one-on-one as well as a small group setting. Mathematical Skills: Basic math skills including the ability to add, subtract, multiply and divide in all units of measure (US and Metric), using whole numbers, common fractions and decimals. Must be able to accurately use various multiple simple measuring devices such as calipers rulers, and tape measures. Physical Demands: Must be able to stand or sit for duration of scheduled shift. Occasionally required to walk, kneel, crouch and/or stoop. Must have excellent dexterity skills to manipulate small objects at a fast pace using excellent eye hand coordination skills. Use hands/fingers, to handle or position objects, activate tools or controls. Required to reach up with hands and arms up to 30 inches for proper placement of components and inspection of completed work; components could weigh up to 10 pounds. Ability to occasionally lift up to 30lbs from floor to table height. Specific vision abilities required by this job include clear vision at 20 inches or less and distant vision at 20 feet or more. Ability to clearly and accurately identify and distinguish similar colors. Depth perception should be three dimensional, with the ability to judge distances and spatial relationships. Ability to adjust the eye to bring an object into sharp focus. Work Environment: Clean, well-lit, well-ventilated, temperature controlled work environment. Some exposure to hot surfaces in tinning and shrink tubing operations. May be exposed to minimal amount of fumes in (non-lead based) soldering operation. While performing the duties of this job, the employee regularly works near moving mechanical parts. The noise level in the work environment is usually moderate. Performance Expectations: Projects a positive image through actions and attitudes for all company personnel Exhibits strong work ethic and positive attendance record Treats all employees, vendors, and customers respectfully and professionally.

SMC Ltd. is not just another company that makes products you have never heard of. As an Operator, you'll play a critical role in manufacturing or assembling parts that make up lifesaving medical devices. We're growing at an exponential rate because of our incredible employees, customers and clients that truly value and need our products. Grow your career with us! About SMC Ltd: SMC, Ltd. is a globally recognized premium supplier to the medical market with locations throughout the world. People committed to speed, technology, and exceptional performance are the cornerstone of our organization. Comprised of dedicated people and decades of manufacturing experience, we have continued to experience strong growth and currently have outstanding career opportunities for equally dedicated people. Pay up to $22.00/hr | WE PAY MORE FOR EXPERIENCE! Typical day in the life of an Operator: You'll be directly involved in the manufacturing process and assemble medical devices or sub-assemblies, operate assembly or packaging equipment and perform assembly processes using assembly fixtures and manual process. These parts are put into medical and industrial devices that are used by thousands of people around the globe every day. You'll use precision measuring instruments, visually inspect products and report surface and dimension defects, and sometimes package them using a variety of tools, including robots. Depending on the job, sometimes you'll put some of the parts together by hand. See something that could be improved? We want to hear it! Your idea could play a critical role in our continuous improvement efforts. At SMC we believe in training and team support, making sure you have the tools necessary to perform your job well. Qualifications: High School Diploma or equivalent preferred. One year of experience in production environment preferred, preferably in a medical or Clean Room Environment. What SMC has to offer? Clean, Climate-Controlled Environment Quarterly bonuses Stable schedule Paid holiday and PTO Health, dental, and vision insurance 401(k) retirement savings Life and disability insurance Promotional opportunities Training and career growth programs Amazing co-workers Tuition reimbursement Employee Assistance Program Available Shifts: 1 st | 6:00am - 2:30pm 2nd | 3:00pm - 11:30pm At SMC Ltd. we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. SMC Ltd. is an equal opportunity employer. M/F/D/V; this organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. #IND #LI-JB1

Job DescriptionDescription: Tjernlund specializes in Draft Inducing and Venting Products and we are looking for an Assembler to join our team right here in beautiful White Bear Lake! We offer a 4 day work week! Enjoy Fridays off every week! Job Duties: Associate will be using their hands, hand tools and pneumatic tools in an assembly line environment. Assembler will be rotated throughout assembly lines to eliminate job repetitiveness. Shift: (4) - 10 hour days; 5:30 am - 4:00 pm; Monday through Thursday. Some overtime available. We offer a comprehensive benefit package, including health, dental, 401(k) with match and PTO! Entry level, will train! Cross-training between departments available if desired. Job Type: Full-time Salary: $19.00 per hour Benefits: 401(k) 401(k) matching Health insurance Dental insurance Vision insurance Long Term Disability insurance- Company Paid Life insurance- Company Paid Immediate PTO accruals On Demand Pay Referral Bonus Employer participates in E-verify Requirements: Physical requirements: Strong Manual Dexterity, lift 30 lbs, ability to stand during the entire 10 hour shift. Equipment Used: hand tools, pneumatic tools, pallet jack, electric taper, I-Pad tablets which provide assembly instructions. Schedule: 10 hour shift Safety toe shoes are required for this position. Up to $50.00 company paid. All offers of employment are subject to a background check.

Exciting New Opening! Advance Services is hiring a Production Assembler to play a key role in building high-quality products! We're looking for dedicated individuals to perform simple to moderately complicated assembly functions. This is a great opportunity for someone with assembly experience or basic knowledge and a willingness to learn! We are seeking someone who can use various hand tools and torque wrenches, read and record measurements, and understand build sheets! Pay: $19-21/hour Shift: 1st Hours: Monday - Thursday (5:30am - 4pm) OR Monday - Friday (6:30am - 3pm) Benefits offered by Advance Services include: We are proud to offer comprehensive benefits to our employees, enhancing overall work experience. Our offerings include Minimum Essential Coverage (MEC) plan, MEC Enhanced, Limited Medical Insurance, Critical Illness, Accident Insurance, Sick Leave, 401(k), Dental, and Vision Insurance. Advance Services offers an easy application process, weekly pay, safety incentives, and NO FEES to use our services. Ready to get started? Apply today! Apply for this job by clicking the apply button. Please stop in and see our experienced, bilingual, and friendly staff today at 6407 City West PKWY, Eden Prairie, MN 55344, or call our office at ************. We can't wait to help you find a new career you'll love! Advance Services is an equal opportunity employer #446

About rms Company rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** Operator Assembler I Position Summary The Operator Assembler I will be responsible for operating and tending manufacturing machines, per prescribed work instructions, to create parts or products. This position is also responsible for quality checks, assembly, packaging, labeling, and moving of product. 2nd shift schedule is Monday - Thursday 3:45pm - 1:45am Responsibilities Operator Assembler I Responsibilities: Operate hand equipment and tools used in the assembly process Ensure quality products are being produced by following work instructions and inspecting parts Ability to use measuring equipment (gauge pins, calipers, tape measure) Maintaining daily production rates Read, understand, and follow work instructions and standard work Qualifications Operator Assembler I Position Requirements: Knowledge of basic math concepts Dexterity and hand and eye coordination Ability to cross train in other areas of production when required Attention to detail Ability to work in a fast-paced team environment Operator Assembler I Perferred Requirements: 1 year of manufacturing experience rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k)-retirement plan with employer match, profit sharing, short- term and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: Onsite Clinic Paid Parental Leave Monthly Social Events Annual Employee Appreciation Week Volunteer Opportunities Training and Development Opportunities Tuition Reimbursement Wellness Program Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $18.00 - USD $22.00 /Hr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard topublic assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

Contract to Hire Job Title: Warehouse Worker - 2nd Shift (Contract-to-Hire through Indrotec) Shift & Pay: 2nd Shift: 3:00 PM - 11:00 PM Initial 3-4 weeks of training required on 1st Shift Starting wage: $20.35/hour Start your next career chapter with Indrotec, working onsite at CHS Inc.-a global agribusiness that connects farmers and consumers with energy, grain, and food solutions. We're currently hiring Warehouse Workers to support CHS Lubricants' blending and packaging operations in Inver Grove Heights. This contract-to-hire opportunity is ideal for individuals who are motivated, detail-oriented, and ready to make a difference in a fast-paced production environment. Key Responsibilities: Package lubricant products in various-sized containers on a production line Operate assembly and material handling equipment, including forklifts Support inventory control, order picking, and receiving Perform line changeovers, machine monitoring, and minor adjustments Follow all safety, food safety, and sanitation procedures Maintain cleanliness in all assigned work areas Assist with team training and support new employee onboarding Perform general labor tasks, including equipment operation, plant cleanup, and grounds maintenance Requirements: Prior experience in production, manufacturing, or warehousing preferred Strong attention to safety and detail Ability to work both independently and in a team environment Willingness to work 2nd shift and complete 1st shift training Ability to lift and move materials as needed and perform physical duties in a plant setting Why Work for Indrotec at CHS Inc.? Competitive hourly wage Contract-to-hire opportunity with long-term potential Access to CHS's strong workplace culture rooted in agriculture and community impact Potential eligibility for CHS benefits upon conversion, including medical, dental, vision, 401(k), pension, and more (subject to collective bargaining agreement) Ready to apply? Take the first step in joining one of Minnesota's leading employers. Apply today and start building your future with Indrotec and CHS Inc.

The Production Worker is under the direction of the shift supervisor and will primarily be responsible for assembly of reconditioned products using established production procedures, following safety protocol and adhering to company's quality standards. Responsibilities: Demonstrates ability to meet production standards on specific assignments within required time Maintains good housekeeping and clean work areas in assigned space Performs all assignments in accordance with safety specifications, instructions, and requirements Responsible for safety and quality throughout production Responsible for notifying a Production Lead or Supervisor when they step off the line to ensure safety and quality standards are maintained Reports all production waste/issues to Production Lead or Supervisor Performs other duties as required by Supervisor or Manager Follows all company policies and procedures Requirements: High School diploma or equivalent Experience working in a Manufacturing Environment Ability to work in a fast paced environment Understand plant safety guidelines and pass all required safety training Must be able to understand verbal and written instructions Troubleshoot problems and report issues Must work well in team environment Physical Requirements: Ability to be on feet up to 8-12 hours per shift Use of hands and fingers to perform job function Ability to stoop, kneel, bend and climb Ability to lift up to 35lbs The starting pay for this position is $20 an hour. Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

MAJOR DUTIES AND RESPONSIBILITIES: Uses pneumatic staplers and nail guns to assemble cabinets and cabinet parts. Operates a variety of automated machines to assemble cabinet parts. Operates a variety of wood cutting machines to prepare cabinet parts. Complies with all safety, quality and productivity guidelines. Communicates safety hazards or quality non-compliance to supervisor. Coordinates with the supervisor for necessary repairs to produce product. PRIMARY RESPONSIBILITIES: Must be able to safely and proficiently perform job duties as assigned. Performs other manufacturing duties as required. ORGANIZATIONAL RELATIONSHIPS: Reports to individual Department Supervisor (Mill, Assembly or Shipping). Works with a variety of peers on a daily basis to complete production tasks. RECOMMENDED QUALIFICATIONS: Able to lift 25 pounds constanty. Able to lift 50 pounds frequently. Able to read a tape measure. JOB HAZARD ANALYSIS: May be exposed to noise levels greater than or equal to 85 decibels for up to 10 hours. Must wear hearing protection in these areas. Must be able to work in moderate levels of wood dust. May be exposed to moderate levels of carbon monoxide.

About the opportunity: The Production Worker is responsible for removing and sorting material from conveyor belts, maintaining a clean shredder facility, and supporting overall yard cleanliness. This role requires physical labor, basic math skills, and the ability to work independently in a fast-paced environment. What you will do in a day: Remove trash, wood, paper, and plastics from conveyor belts Sort and place materials into the correct chutes or onto conveyors Clean the yard by sweeping, raking, and picking up debris Move barrels and bins as needed Perform general cleaning tasks Assist with other duties as assigned You may be a good fit if you: Ability to work independently Basic math skills Able to lift and handle up to 50 pounds Capable of performing physical tasks in various environments What we offer: Steady Schedule: Monday-Friday, 11am - 9pm Year-round work: No seasonal layoffs PTO + 9 paid holidays Health coverage: Medical, dental, and vision insurance HSA/FSA with company contributions 401(k) with company match #LI-Onsite

The Assembly Technician will be part of a world class team. This person will be self-motivated and will understand the value of a strong work ethic, teamwork, and integrity in the workplace. Our success begins with our employees. Management Responsibilities This position has no supervisory responsibilities. Essential Job Functions · Prepare or build up boat parts, sub-systems and components · Perform checks and inspections to ensure quality · Operate various power tools, hoists, and production equipment · Ability to lift up to 40 pounds · Ability to bend, twist, turn, kneel, squat, and reach overhead · Must be able to perform strong pinch and grip · Must be able to push/pull up to 100 pounds · Ability to stand/walk up to 8 hours a day · Performs other related duties as assigned Requirements · High School degree or equivalent · Ability to communicate well with others · Ability to read and understand routings, work orders, manifests, and production reports · Ability to take instructions and work with little supervision · Ability to operate overhead crane · Must be able to lift up to 40 pounds · Must be a team player with focus on customer service and quality · Must have solid work attendance and be reliable · Ability to work within and advance the Premier Marine Core Values: Integrity: Navigating with a moral compass, doing the right thing every time. Excellence: Relentless pursuit of exceptionalism, laser focus on continuous improvement. Attitude: Contagious optimism that fuels a powerful can-do culture. Collaboration: Leveraging collective innovation to achieve world-class results. Education and Experience Requirements: · High School degree or equivalent Physical Requirements The physical demands needed are representative of those that must be met by an employee to successfully perform the essential functions of this job (sitting, standing, walking the manufacturing floor, and the ability to lift up to 40 pounds). Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this role. *The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. This document does not create an employment contract, implied or otherwise, other than an "at-will" employment relationship. Premier Marine, LLC retains the discretion to add duties or change the duties of this position at any time. Salary Description $18-$23

Looking for a great-paying job in Central MN? Check out this role! Doherty Staffing Solutions is partnering with a leading manufacturer of sunshades, louvers, and decorative grilles located in Delano, MN. We are seeking candidates for Production Worker roles on 1st shift (6am-2:30pm Monday thru Friday) and 2nd shift (2:30pm-1am Monday thru Thursday). Compensation for these temp-to-hire opportunities ranges between $18.50-$21.00 per hour, depending on experience and shift. Interested? Read below for more information! What you will do as a Production Worker: Position parts or materials for processing Care for machines, add coolant, and lubricate machine parts Remove foreign material from items on conveyor belts Report labor transactions and job information accurately Control material costs, labor, and overhead costs Work efficiently with colleagues to minimize energy and material waste Meet quality expectations while meeting schedule requirements Assist other production workers as needed What you need to be a Production Worker: Must have at least 6 months experience withing the lat 6 months operating machinery or industrial equipment Must have experience using a tape measure and basic power tools Must have written and verbal communication skills in English Must be able to follow written blueprint instructions or schematics Must have knowledge of 5S Lean practices Must be able to lift and/or move up to 50 pounds and occasionally lift and/or move up to 75 pounds with or without reasonable accommodations Must be able to sit; use hands; reach with hands and arm; and stoop, kneel, crouch, or crawl Must have practical problem-solving skills and be able to work with colleagues to accomplish objectives Must keep work area clean and organized Must have history of good attendance and punctuality Take the next step towards a new job! Click APPLY NOW to complete our mobile-friendly, online application. For questions or additional details regarding the Production Worker opportunities, please contact our Delano jobs office directly at (763) 972-8858. #WorkNow Doherty Staffing Solutions offers our valued contract employees health coverage through Benefits in a Card (preventative benefit and minimum value plans), along with weekly paychecks via a prepaid card from CHANGE. Learn more and find helpful links to additional resources at www.doherty.com/job-seekers/employee-benefits.

The Production Worker is under the direction of the shift supervisor and will primarily be responsible for assembly of reconditioned products using established production procedures, following safety protocol and adhering to company's quality standards. Responsibilities: Demonstrates ability to meet production standards on specific assignments within required time Maintains good housekeeping and clean work areas in assigned space Performs all assignments in accordance with safety specifications, instructions, and requirements Responsible for safety and quality throughout production Responsible for notifying a Production Lead or Supervisor when they step off the line to ensure safety and quality standards are maintained Reports all production waste/issues to Production Lead or Supervisor Performs other duties as required by Supervisor or Manager Follows all company policies and procedures Requirements: High School diploma or equivalent Experience working in a Manufacturing Environment Ability to work in a fast paced environment Understand plant safety guidelines and pass all required safety training Must be able to understand verbal and written instructions Troubleshoot problems and report issues Must work well in team environment Physical Requirements: Ability to be on feet up to 8-12 hours per shift Use of hands and fingers to perform job function Ability to stoop, kneel, bend and climb Ability to lift up to 35lbs The starting pay for this position is $20 an hour. Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.