Line up worker jobs in Carlsbad, CA

Job Title: Assembly / Production Worker Schedule: Monday - Friday, 9:00 AM - 5:30 PM Pay Rate: $20 per hour Job Summary: We are a leading manufacturer of electric vehicle (EV) charging systems, is seeking reliable Assembly and Production Workers to support its manufacturing operations in Irvine. This position involves hands-on work assembling components for both DC fast chargers and AC charging stations. Candidates should be detail-oriented, able to follow instructions, and work efficiently in a team setting. Key Responsibilities: Assemble and test EV charging components according to specifications Perform basic production tasks including wiring, bolting, labeling, and packaging Follow safety and quality procedures throughout the assembly process Inspect parts and report any issues or defects to the supervisor Maintain an organized and clean workspace Support team goals and daily production targets

Chula Vista, CA Summary: Performs variety of general work on U.S. Navy shore facilities, waterborne vessels, surface ships and/or submarines. Tasks will be assigned by the Project Manager. Duties and Responsibilities include the following: Other duties may be assigned. Performs a variety of general manual labor tasks including, but not limited to, lifting and moving materials, loading and unloading vehicles, surface preparation work, and other activities in helping or assisting mode. Assists mechanic in simple repairs on machinery. Perform housekeeping efforts to maintain cleanliness of the worksite. Delivering materials as required. Perform duties as Fire Watch. Participates in special projects as required. Employees may be required to travel to work to other locations. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: High School Diploma or GED. Certificates and Licenses: Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed. Knowledge, Skills and Other Abilities: Ability to follow written and verbal instructions. Must be able to read and understand material safety data sheets (MDS). Able to follow safety procedures. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is working on a ship. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Wage Range: $19.00 - $25.00 In determining compensation, various factors will be considered, including but not limited to, educational background; relevant experience, knowledge, skills, and abilities, market factors; and geographic location.

with this, you will Job Title: Production Worker (Cold Environment) Location: San Clemente, CA 92673Pay Rate: $17.50Shift: 8:00 AM to 4:00 PMJob Description: Looking for employees who will want to work 8am to 4pm or until production is finished. Days will vary. This is a COLD environment!!!I will need all paperwork completed, including 2 forms of IDs and these forms completed as well.Will have to copy and paste link. **Copy and paste into the browser** GMP Fresh Realm Test - Must mark all boxes ******************************************** Widget?wid=CBFCIBAA3AAABLblqZhANWXLnKY3t2xEvUK8BeP0eaJFMAijvL6AqTP5p3t-tx ZaAVUfQV4KFDZ6QK9k8BfM* Background Release Information ******************************************** Widget?wid=CBFCIBAA3AAABLblqZhDsYKwqVubv76dwqrDLP9KXWCq-Vp25a1iwHSIcbqSHGr5WTiF-IWqdZmgQTpIBIlE* Fresh Realm Important Information ******************************************** Widget?wid=CBFCIBAA3AAABLblqZhCFODTZHIFEWhrr-ZQ59HiwAOmFjVIePxQgbiMyPv5ZYPYJmOhctl-5-SWT6fOIYu4* CA Income Tax form - ******************************************** Widget?wid=CBFCIBAA3AAABLblqZhCz6CdHuiGFujUFgZYYhv55oSC6CYKoD1MOGy5rtBKHoxWsbD9ZyBeCkBx35O79Qho* Once you are finished with both links, I will need 2 forms of Identifcation. Please email it to ******************************* Both links have to be completed, and you must send the IDs in, with this, you will be contacted to move forward.Job Types: Full-time, Temp-to-hire Pay: From $17.50 per hour Benefits: Dental Insurance Health insurance Vision insurance Schedule: 8-hour shift Monday to Saturday Morning shift Application Question(s): Do you understand this is working in a cold environment? Are you able to pass a background check and e-verify? This is production work so the days will vary! Do you understand this? The pay is $17.50 per hour. Work Location: In person

+ Looking for Electromechanically system level build and troubleshooting experience. **Responsibilities:** + Performs the build, calibration, testing and troubleshooting of mechanical assemblies at a system level. + Determines and may develop test specifications, methods and procedures from blueprints, drawings, and diagrams. + May complete rework on assemblies and/or systems because of testing. + Prepares technical reports summarizing findings and recommending solutions to technical problems. + Lift 50 lb requirement **Experience:** + Typically requires a minimum of 2 - 4 years of related experience. + Looking for a person with strong mechanical, electrical and software sills. + Optical skills + in relation to understanding concave/convex mirrors. + Test fixture to do a functional test and ability to troubleshoot assemblies a must. + Class 100 clean room wearing laser goggles. **Skills:** + Opto assembly BIG system level + Mechanical assemblies + Optical- Laser + Troubleshooting + Calibration **Education:** + An AA degree, military technical training or their equivalent vocational training is required. **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. We are currently seeking Assembly Workers to join our team in San Diego, CA! Pay Rate- $18/hour Job Description: Assemble components and parts according to production specifications and blueprints. Conduct inspections of assembled products to ensure quality and compliance with standards. Use hand tools, power tools, and machinery to complete assembly tasks. Maintain a clean and organized work area to ensure safety and efficiency. Collaborate with team members to meet production goals and deadlines. Report any issues or discrepancies in assembly to supervisors. Follow all safety procedures and regulations in the workplace. Requirements Job Requirements: Previous experience in assembly work preferred but not required. Ability to read and understand technical specifications and blueprints. Strong attention to detail and quality control. Basic math skills for measurements and calculations. Ability to lift up to 50lbs and perform physical tasks as required. Must be able to work in a fast-paced environment. Reliable transportation is required. Must pass a drug test and background check. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. We are currently seeking Assembly Workers to join our team in San Diego, CA! Pay Rate- $18/hour Job Description: * Assemble components and parts according to production specifications and blueprints. * Conduct inspections of assembled products to ensure quality and compliance with standards. * Use hand tools, power tools, and machinery to complete assembly tasks. * Maintain a clean and organized work area to ensure safety and efficiency. * Collaborate with team members to meet production goals and deadlines. * Report any issues or discrepancies in assembly to supervisors. * Follow all safety procedures and regulations in the workplace. Requirements Job Requirements: * Previous experience in assembly work preferred but not required. * Ability to read and understand technical specifications and blueprints. * Strong attention to detail and quality control. * Basic math skills for measurements and calculations. * Ability to lift up to 50lbs and perform physical tasks as required. * Must be able to work in a fast-paced environment. * Reliable transportation is required. * Must pass a drug test and background check. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: * Health * Dental * Vision * Voluntary Life/Voluntary AD&D * Short-Term Disability * Long-Term Disability * Hospital Indemnity * Accident * Critical Illness * 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability Apply Now Apply Now Share via Email Location San Diego, ca Type Posted Date March 17, 2025 Compensation * Don't Miss Out Sign up to be notified of new jobs that match this search. Name This field is for validation purposes and should be left unchanged. Email CAPTCHA Get Notified Δ

Summary 🏭 Production Assembler - Swing Shift 🕓 Shift: Monday-Friday, 4:00 PM start time (Overtime required), occasional Saturdays 💵 Pay: $21.50/hour + $3.00/hour shift differential 🚀 Build Your Future with MITER Brands! At MITER Brands-home to trusted names like Milgard, MI Windows & Doors, and PGT Innovations-we're more than just a window and door manufacturer. We're a team of builders, innovators, and go-getters shaping the spaces where life happens. 🏡✨ We're on the lookout for motivated, hands-on individuals to join our Insulated Glass Department as Production Assemblers. Whether you're experienced or just ready to learn, this is your chance to grow with a company that values your hard work and dedication. 💪 🌟 Why You'll Love Working Here: 💰 Competitive Pay: $21.50/hour + $3.00/hour shift differential 📈 Career Growth: We promote from within and offer training to help you succeed 🤝 Team Culture: Join a supportive, respectful, and hardworking crew 🏆 Industry Leader: Be part of one of the largest and most respected manufacturers in the U.S. Responsibilities 🪟 Assemble insulated glass units with precision and care 🛠️ Use hand and power tools (drills, saws, screw guns) to cut, fasten, and build components 👀 Inspect finished products to ensure top-notch quality 🧼 Keep your work area clean, organized, and safe 📘 Read and interpret work orders and blueprints (training provided!) 🏃 ♂️ Stay active-stand for extended periods and lift up to 50 lbs Qualifications 🎓 High school diploma or equivalent (preferred) 🏭 Manufacturing or assembly experience is a plus-but not required! 🔍 Strong attention to detail and manual dexterity 📐 Willingness to learn how to read blueprints and work orders 🧰 Ability to safely and effectively use hand and power tools About Us Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company. Three comprehensive Medical plan options Prescription Dental Vision Company Paid Life Insurance Voluntary Life Insurance Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance Company-paid Short-Term Disability Company-paid Long-Term Disability Paid time off (PTO), including Vacation, Personal, and paid Holidays 401k retirement plan with company match Employee Assistance Program Teladoc Legal Insurance Identity Theft Protection Pet Insurance Team Member Discount Program Tuition Reimbursement Yearly Wellness Clinic MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category. #MITERtemecula

BASIC FUNCTION The primary function of the Spreader/Laborer is to be at the home site when scheduled and off-load and on-loading HSD Products from the truck, and to place the materials in the designated locations within each lot. Duties might vary depending on the type of job and location. REQUIREMENTS Education: Preferred: High School Graduate. Experience: Preferred: Six months prior work experience as a helper for a finish carpentry construction company. Skills/Knowledge/Abilities: Knowledge of door, mill-work, and door hardware products a huge plus. Must be able to follow schedules as established by the Supervisor. Able to coordinate and spread the materials at or below the scheduled amount of time. Ability to understand written and verbal instructions in English. Ability to read, understand, and follow safety procedures. Must be able to work with limited supervision. Physical Requirements: This position requires standing for an extended length of time. Must be in sound physical condition and able to perform a physically demanding job. Must be able to lift up to 75 pounds without assistance. The physical condition for this position is rough and vigorous; this will require off-loading materials from the truck and carrying the materials to the correct lots. Mental Requirements: Basic math skills. Ability to communicate in English. Work Environment: Home site construction environment. Long and irregular hours at times. This might include some weekends and overtime depending on the work load. Exposure to extreme heat & cold weather conditions, dust, dirt, fumes, and loud noises. RESPONSIBILITIES AND DUTIES To safely operate all tools used on the home site. Inspect the load after off-loading for damages. Take the materials to the correct lots and neatly place the materials in the location stated on the paperwork. Accurately count the materials that were taken to the lots and report any shortages to the Driver or Foreman on the home site. After all materials are spread, walk the units to make 100% sure everything is correctly spread, kicked, and pinned per HSD Standards. Pick up any materials that was previously sent by mistake or returns and put back on the truck. To attend Weekly Safety Meetings on the Home Site. Performs any other duties and tasks as may be assigned from time to time by the Supervisor.

BASIC FUNCTION The primary function of the Spreader/Laborer is to be at the home site when scheduled and off-load and on-loading HSD Products from the truck, and to place the materials in the designated locations within each lot. Duties might vary depending on the type of job and location. REQUIREMENTS Education: Preferred: High School Graduate. Experience: Preferred: Six months prior work experience as a helper for a finish carpentry construction company. Skills/Knowledge/Abilities: Knowledge of door, mill-work, and door hardware products a huge plus. Must be able to follow schedules as established by the Supervisor. Able to coordinate and spread the materials at or below the scheduled amount of time. Ability to understand written and verbal instructions in English. Ability to read, understand, and follow safety procedures. Must be able to work with limited supervision. Physical Requirements: This position requires standing for an extended length of time. Must be in sound physical condition and able to perform a physically demanding job. Must be able to lift up to 75 pounds without assistance. The physical condition for this position is rough and vigorous; this will require off-loading materials from the truck and carrying the materials to the correct lots. Mental Requirements: Basic math skills. Ability to communicate in English. Work Environment: Home site construction environment. Long and irregular hours at times. This might include some weekends and overtime depending on the work load. Exposure to extreme heat & cold weather conditions, dust, dirt, fumes, and loud noises. RESPONSIBILITIES AND DUTIES To safely operate all tools used on the home site. Inspect the load after off-loading for damages. Take the materials to the correct lots and neatly place the materials in the location stated on the paperwork. Accurately count the materials that were taken to the lots and report any shortages to the Driver or Foreman on the home site. After all materials are spread, walk the units to make 100% sure everything is correctly spread, kicked, and pinned per HSD Standards. Pick up any materials that was previously sent by mistake or returns and put back on the truck. To attend Weekly Safety Meetings on the Home Site. Performs any other duties and tasks as may be assigned from time to time by the Supervisor.

We are seeking a dedicated and skilled Laborer to join our team. The ideal candidate will possess a strong work ethic and the ability to perform a variety of tasks in a fast-paced environment. This role requires physical stamina and the capability to work collaboratively with others to ensure projects are completed efficiently and safely. Responsibilities * Perform general labor tasks including loading, unloading, and moving materials. * Operate hand tools and power equipment safely and effectively. * Assist in the setup and cleanup of job sites. * Follow instructions from supervisors and adhere to safety protocols. * Maintain a clean and organized work environment. * Collaborate with team members to achieve project goals. * Report any equipment malfunctions or safety hazards to management. Requirements * Previous experience in a labor-intensive role is preferred but not required. * Ability to lift heavy objects (up to 50 pounds) and perform physical tasks for extended periods. * Strong attention to detail and commitment to safety practices. * Good communication skills and ability to work as part of a team. * Willingness to learn new skills and take on additional responsibilities as needed. * Valid driver's license may be required for certain positions. Join our team and contribute your skills in a dynamic work environment where your efforts will be valued!

• Cleaning and preparing work sites. • Loading and unloading materials and equipment • Building and taking down scaffolding and temporary structures • Operating and tending machinery and heavy equipment • Following instructions from supervisors and implementing construction plans • Assisting skilled tradespeople in their duties

Labor One is hiring Laborers for a Ship Repair project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 *Please send us a text if we don't answer* Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: This position is responsible for supporting mechanics in the accomplishing of production tasks, including the use of small mechanical and hand tools. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Comprehend basic instructions and general correspondence. 2. Be able to clearly communicate verbally to warn others of fire or other danger. 3. Possess the skills required of a Fire Watch. 4. Have experience using small power tools and hand tools in a production environment. 5. Be able to wear clothing appropriate for the task. No exposed jewelry shall be worn while working. Finger nails shall be short. Long hair shall be worn in pony tail or wrapped for protection and should not interfere with hard hat. Ability to wear PPE, especially respirators. DUTIES AND RESPONSIBILITIES 1. Arrive at the designated work site at the assigned time. End the shift as directed by the schedule and your supervisor or mechanic. 2. Work shifts and overtime as assigned the supervisor. 3. Comply with OSHA standards and the shipyards best safety practices. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) 4. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment. 5. If assigned as a fire watch, carry out the duties of a fire watch as delineated in the Fire Watch Labor Category including having a fire watch training card at the work site at all times. 6. Keep your work area clean and safe at all times, especially at the end of the shift. 7. Warn other personnel of danger, or to evacuate, by verbal or other prearranged method of communication. 8. Adhere to all safety rules and good work ethics. Be accountable for completion of work assignments. Work Tasks Include: a) Accomplish basic cutting, drilling, and grinding operations as needed to support mechanics in the accomplishments of their tasks. b) Ensure that designated hot work area is clean and free of combustible materials before hot work is started. c) Run lines and leads to the work site in a safe manner. d) Transport material and tools to the worksite as required. e) Wash tanks and bilges as required to support the Gas Freeing, preservation preparations, or tank closing operations. WORK ENVIRONMENT -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. -Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. -----The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS INCLUDE: (May be required to demonstrate any or all requirements.) 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day). 2. Lift/push/pull up to 20 - 30 lbs on a frequent basis (34-66% of the day). 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel. 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps). 5. Work at a variety of levels and positions (ex. Waist, eye, above head). 6. Good balance while working on uneven surfaces and maneuvering obstacles. 7. Sufficient handgrip and coordination to carry and operate tools and equipment. 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day). 9. Respond to visual, verbal, and audible sounds/commands. 10. Work at heights above 12' from ladders, scaffolding, and manlifts. 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. work under the guidance of the Crane Operator and Tender. 1st Shift 40 Hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

About UsField AI is transforming how robots interact with the real world. We are building risk-aware, reliable, and field-ready AI systems that address the most complex challenges in robotics, unlocking the full potential of embodied intelligence. We go beyond typical data-driven approaches or pure transformer-based architectures, and are charting a new course, with already-globally-deployed solutions delivering real-world results and rapidly improving models through real-field applications. Assembly Technician RoleAs an Assembly Technician for Perception & Compute Payloads, you will be a hands-on contributor responsible for assembling, integrating, and validating Field AI's sensing and compute payloads. You will build electro-mechanical subsystems, integrate sensors and embedded compute platforms, perform harnessing and power system checks, support functional testing, and ensure every payload is field-ready and reliable. This role bridges mechanical assembly, electrical integration, and practical system-level debugging. You will support both prototype development and production workflows while working closely with engineers to improve build processes and increase system reliability.What You Will Get To Do 1. Payload Assembly & Integration Assemble perception payloads including LiDAR, cameras, IMUs, GPS receivers, and auxiliary sensors using engineering drawings and build instructions. Install and integrate CPU/GPU compute modules, carrier boards, and microcontroller-based subsystems. Build and route wire harnesses for power, high-speed data, synchronization, and control. Install mounts, enclosures, gaskets, seals, thermal components, and structural hardware. 2. Electrical, Power, and Communication Bring-Up Perform continuity checks, grounding/EMI checks, and power-rail validation. Assist in bring-up of Linux- or ROS2-based embedded compute systems. Validate communication links across Ethernet, USB, CAN, GMSL, and other interfaces. Verify correct connectorization, pinouts, and harness strain-relief practices. 3. System Testing & Quality Assurance Run functional tests including sensor bring-up, calibration checks, compute boot/health tests, and network verification. Document test results, deviations, rework, and repair actions with high accuracy. Support environmental, vibration, mechanical alignment, and thermal characterization tests led by hardware engineers. Conduct inspections for workmanship quality, mechanical stability, and electrical safety. 4. Debugging & Continuous Improvement Diagnose wiring faults, mechanical misalignments, intermittent communication issues, thermal faults, and other integration failures. Work closely with electrical, mechanical, and compute engineers to root-cause issues and improve build processes. Provide feedback on assembly workflows, documentation clarity, and opportunities to streamline production. 5. Field & Operations Support Prepare, stage, and service payloads for real-world deployment. Support integration and troubleshooting activities during lab tests, field trials, and live demonstrations. Perform rapid repairs and reconfigurations in dynamic testing environments. What You Have 2+ years of hands-on technician experience in robotics, aerospace, electronics, automotive, or related electro-mechanical assembly environments. Proficiency with hand tools, power tools, torque drivers, and basic machine-shop tools. Ability to read and follow wiring diagrams, mechanical drawings, and assembly instructions. Experience building wire harnesses and working with low-voltage electrical systems. Familiarity with embedded compute systems, sensors, or robotics hardware. Strong attention to detail, documentation discipline, and ability to deliver reliable assemblies. Ability to lift up to 50 lbs. and work in workshop, lab, or field environments. What Will Set You Apart Experience working with perception systems such as LiDAR, cameras, radar, or IMUs. Familiarity with Linux, ROS2, or embedded system bring-up workflows. Soldering, crimping, or IPC-certified workmanship skills. Understanding of thermal management, weather sealing, EMI/EMC basics, and ruggedized mechanical design. Experience supporting prototype builds, rapid iteration cycles, or field test deployments. Ability to design or suggest simple fixtures or jigs to improve assembly and repeatability. Experience assembling complex electro-mechanical systems, especially robotics, drones, or ruggedized field hardware. Why Join Field AI?We are solving one of the world's most complex challenges: deploying robots in unstructured, previously unknown environments. Our Field Foundational Models™ set a new standard in perception, planning, localization, and manipulation, ensuring our approach is explainable and safe for deployment. You will have the opportunity to work with a world-class team that thrives on creativity, resilience, and bold thinking. With a decade-long track record of deploying solutions in the field, winning DARPA challenge segments, and bringing expertise from organizations like DeepMind, NASA JPL, Boston Dynamics, NVIDIA, Amazon, Tesla Autopilot, Cruise Self-Driving, Zoox, Toyota Research Institute, and SpaceX, we are set to achieve our ambitious goals. Be Part of the Next Robotics RevolutionTo tackle such ambitious challenges, we need a team as unique as our vision - innovators who go beyond conventional methods and are eager to tackle tough, uncharted questions. We're seeking individuals who challenge the status quo, dive into uncharted territory, and bring interdisciplinary expertise. Our team requires not only top AI talent but also exceptional software developers, engineers, product designers, field deployment experts, and communicators. We are headquartered in always-sunny Irvine, Southern California and have US based and global teammates. Join us, shape the future, and be part of a fun, close-knit team on an exciting journey! We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. * Operate machinery, hand tools, and pneumatic tools involved in highly repetitive and routine functions such as riveting, drilling, gluing, and assembling. * Operate forklift equipment to pull materials * Install hardware, perform quality inspection/checks, package finished goods for shipping. * Work in a repetitive, fast paced environment and participate in teams to improve processes. * Observe all prescribed safety rules and regulations and maintain work area in a neat and orderly condition * Support the production process by filling in positions on the line when necessary to maintain the flow of work when absences occur (Vacation, PTO, Restroom breaks, etc.). * Be a change agent and drive out waste throughout department through the deployment of the Lean methodology. * Execute and coordinate employee cross training to ensure to achieve optimal team functionality. * Coordinate the timely and accurate movement of material into, within and out of assigned work area as needed. * Drive a continuous improvement culture by involving employees in problem solving and decision making as well as recognizing them for exceptional work. * May be required to perform additional duties as assigned. WE HAVE: * A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day * nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. * Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at ************** * Commitment to strengthen communities where our employees live and work * We encourage and support the philanthropic activities of our employees worldwide * Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money * Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: * Innovative & adaptable * Dedicated to absolute integrity * Focused on the customer first * Respectful and team oriented * Optimistic and energizing * Accountable for performance * Benefits to support the lives of our employees Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: * Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. * A 401(k) retirement plan and an employee stock purchase plan - both include a company match. * Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth.

Tests and calibrates parts Uses hand tools and power tools Identifies units that do not meet product specifications Repair units that fail testing Qualifications Some experience in the field MUST have high school diploma OR equivalent (and able to provide a copy of diploma) Able to lift 10-15 pounds Able to pass background screening AND drug screening Additional Information Pay Rate: $8.00/hr Shift: Monday-Friday, 7AM-3:30PM 8+/- Month Contract

At Kelly Services, we work with the best. Our clients include 99 of the Fortune 100TM companies, and more than 70,000 hiring managers rely on Kelly annually to access the best talent to drive their business forward. If you only make one career connection today, connect with Kelly. Job Description JOBS JOBS JOBS JOBS JOBS IMMEDIATE OPENINGS!!!!!!!!!!! 1st Shift Production position in Irvine off of Jamboree and Main St. 1st Shift 6:00 am - 3:00 pm Starting pay is $10.00 PH. Full time Temp to Hire position. Packaging, labeling, racking, paletizing, Production work. My client will train you. Background and Drug screen required. No education screening required. For Immediate consideration please contact Humberto Gutierrez at, (714) 425-2044 Apply today and start within the next 3-4 days. We will set you up for a tour so you can see the job you will be doing. Hope to hear from you soon!!! Qualifications • Able to lift up to 25 pounds. • Stand, bend at the knees & waist on a continuous basis. • Reliable transportation. • Able to follow directions and work independently. • Available to work up to 12 hours shifts. • Be willing to submit to background and drug testing. Must be eligible to work in The United States. Additional Information Why Kelly? As a Kelly Services candidate you will have access to numerous perks, including: Exposure to a variety of career opportunities as a result of our expansive network of client companies Career guides, information and tools to help you successfully position yourself throughout every stage of your career Access to more than 3,000 online training courses through our Kelly Learning Center Group-rate insurance options available immediately upon hire* Weekly pay and service bonus plans

Summary 🏭 Production Assembler 🕓 Shift: Monday-Friday, 5:00 AM start time (Overtime required), occasional Saturdays 💵 Pay: $21.50/hour 🚀 Build Your Future with MITER Brands! At MITER Brands-home to trusted names like Milgard, MI Windows & Doors, and PGT Innovations-we're more than just a window and door manufacturer. We're a team of builders, innovators, and go-getters shaping the spaces where life happens. 🏡✨ We're on the lookout for motivated, hands-on individuals to join our team as a Production Assembler. Whether you're experienced or just ready to learn, this is your chance to grow with a company that values your hard work and dedication. 💪 🌟 Why You'll Love Working Here: 📈 Career Growth: We promote from within and offer training to help you succeed 🤝 Team Culture: Join a supportive, respectful, and hardworking crew 🏆 Industry Leader: Be part of one of the largest and most respected manufacturers in the U.S. Why work at MITER BRANDS Responsibilities 🪟 Assemble insulated glass units with precision and care 🛠️ Use hand and power tools (drills, saws, screw guns) to cut, fasten, and build components 👀 Inspect finished products to ensure top-notch quality 🧼 Keep your work area clean, organized, and safe 📘 Read and interpret work orders and blueprints (training provided!) 🏃 ♂️ Stay active-stand for extended periods and lift up to 50 lbs Qualifications 🎓 High school diploma or equivalent (preferred) 🏭 Manufacturing or assembly experience is a plus-but not required! 🔍 Strong attention to detail and manual dexterity 📐 Willingness to learn how to read blueprints and work orders 🧰 Ability to safely and effectively use hand and power tools About Us Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company. Three comprehensive Medical plan options Prescription Dental Vision Company Paid Life Insurance Voluntary Life Insurance Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance Company-paid Short-Term Disability Company-paid Long-Term Disability Paid time off (PTO) and paid Holidays 401k retirement plan with company match Employee Assistance Program Teladoc Legal Insurance Identity Theft Protection Pet Insurance Team Member Discount Program Tuition Reimbursement Yearly Wellness Clinic MITER Brands, also known as MI Windows and Doors, Milgard and PGT Industries are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category.

BASIC FUNCTION The primary function of the Spreader/Laborer is to be at the home site when scheduled and off-load and on-loading HSD Products from the truck, and to place the materials in the designated locations within each lot. Duties might vary depending on the type of job and location. REQUIREMENTS Education: Preferred: High School Graduate. Experience: Preferred: Six months prior work experience as a helper for a finish carpentry construction company. Skills/Knowledge/Abilities: Knowledge of door, mill-work, and door hardware products a huge plus. Must be able to follow schedules as established by the Supervisor. Able to coordinate and spread the materials at or below the scheduled amount of time. Ability to understand written and verbal instructions in English. Ability to read, understand, and follow safety procedures. Must be able to work with limited supervision. Physical Requirements: This position requires standing for an extended length of time. Must be in sound physical condition and able to perform a physically demanding job. Must be able to lift up to 75 pounds without assistance. The physical condition for this position is rough and vigorous; this will require off-loading materials from the truck and carrying the materials to the correct lots. Mental Requirements: Basic math skills. Ability to communicate in English. Work Environment: Home site construction environment. Long and irregular hours at times. This might include some weekends and overtime depending on the work load. Exposure to extreme heat & cold weather conditions, dust, dirt, fumes, and loud noises. RESPONSIBILITIES AND DUTIES To safely operate all tools used on the home site. Inspect the load after off-loading for damages. Take the materials to the correct lots and neatly place the materials in the location stated on the paperwork. Accurately count the materials that were taken to the lots and report any shortages to the Driver or Foreman on the home site. After all materials are spread, walk the units to make 100% sure everything is correctly spread, kicked, and pinned per HSD Standards. Pick up any materials that was previously sent by mistake or returns and put back on the truck. To attend Weekly Safety Meetings on the Home Site. Performs any other duties and tasks as may be assigned from time to time by the Supervisor.

Start your construction career with Essel today! We are looking to add hard-working and reliable future builders to our team. What we are looking for We are looking for a Laborer to work for the construction of landfill gas collection or other environmental pollution control systems. You will report to the Project Manager, Project Superintendent, Senior Field Technician or Project Foreman on site. How you can make an impact * Assist project personnel with hand excavation/digging (using shovels or picks). * Follow equipment operator during excavations and pipe installations to clear earth, plants, and debris that heavy equipment cannot clear or remove. * Help with the fusion of pipe by operating fusion equipment under the supervision of a fusion technician. Clear area of debris and earth to settle equipment in preparation for fusing procedure. * Operate dump trucks used to haul off waste from excavations and drilling of gas wells. * Help with the setup of drilling equipment, clearing area of debris and earth to settle equipment in preparation for drilling procedure. Carry and pour sacks of sand or other materials to settle installation of piping in drilled gas well hole. * Install metal stakes and other retaining materials to hold piping on hillsides/slopes. * Enter excavations to fuse pipe, install gas system piping, and install leachate or condensate piping. * Enter manholes, sumps, or other confined spaces to install new gas system or leachate/condensate system piping. * Repair leachate and condensate lines by cutting piping and removing or draining leachate or condensate liquids. * Operate power saws and drills to connect and cut piping and wellheads, and to cut slots into our gas system piping. * Remove, clean and install LFG gas system liquid pumps. * Replace or install sumps for gas system wellheads or leachate systems.