Line up worker jobs in Islip, NY

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The incumbent is responsible for the maintenance and repair of buildings and grounds. The incumbent will possess a basic knowledge of electrical and all hazards. Primary Duties/Responsibilities: Assist the skilled trade's employees in performing operations and maintenance on plant equipment and buildings. Perform preventive maintenance functions, including, but not limited to lubrication of equipment. Disassemble and repack pumps. Perform custodial and clean-up work on plant grounds including cutting grass, snow removal and trash pick-up. Perform custodial work in buildings including, but not limited to, sweeping, mopping, waxing, buffing, washing windows scrubbing walls and vacuuming. Perform manual labor functions as assigned. Perform minor maintenance services on vehicles and equipment including, but not limited to, washing, tightening chains, replacing cables and bolts, checking tire inflation and performing lubrication according to the manufacturers' recommended schedules. Perform regular checks of equipment condition, noting deficiencies and following maintenance scheduling procedures, schedule the necessary maintenance or replacement. Clean and prepare surfaces to be painted. Apply paint and varnish to buildings and equipment. Perform sign lettering skills as assigned. Recommend materials and supplies needed both to advise management on specific applications and to maintain inventory. Provide coverage for Bio-Solids Loader in the event of Staffing issues, Observe all on-the-job safety regulations. Other related tasks as assigned. Work Environment: Work is performed both inside and outside with exposure to all kinds of weather conditions. Incumbents may be occasionally exposed to some noise, silica, dust, fumes, smoke, gasses, greases, oils, electrical energy, solvents and vibration. Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, ladder/scaffolding, below ground and may be exposed to water or other liquid materials. Maintain a high level of focus on health, safety and environment, ensuring safety within all activities. Qualifications Education/Experience/Background: High School Diploma/GED is required. At least one (1) year of related trade experience. Minimum (2) year on job site training. Knowledge/Skills/Abilities: Able to utilize materials, methods, tools and equipment used in the day-to-day maintenance of buildings and grounds. Ability to adhere to all policies and regulations regarding safety. Ability to communicate written and orally. Knowledge or/and ability to safely operate all hand or power tools equipment related to the job. Ability to manipulate and understand the required functions of the Computerized Maintenance Management System (CMMS). Vehicle and Heavy Equipment Operations : Pickup Truck(s) Forklift or other Powered Industrial Truck Cranes - Mobile and Truck Crane Required Certification/Licenses/Training: Hold and maintain a NYS driver's license - Commercial Driver's License Preferred and the ability to meet risk management guidelines. Must be familiar with all safety regulations and be prepared to work in and supervise confined space entry, and LOTO procedures (Training provided). Additional Information Pay Range: $20.14 to $27.20 per hour. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

**CMTA (formerly AMA Group), a Legence company** CMTA is one of the fastest-growing engineering firms in the U.S., known for sustainable, high-performance building systems and complex MEP/FP delivery. Through AMA's design expertise in media, broadcast, and production facilities-and CMTA's national portfolio in education, healthcare, and zero-energy projects-we pair deep technical craft with an innovative, collaborative culture that accelerates careers. **Title:** Construction Laborer **Location:** Project sites across NYC, Northern New Jersey, and Southern Connecticut **Reports to:** Site Superintendents **Position Overview:** AMA Design Build is seeking a reliable and hardworking Construction Laborer to support daily operations on high-end residential and commercial construction projects. This hands-on role is essential to maintaining clean, safe, and organized job sites, as well as protecting newly installed finishes and existing structures. **Who We Are?** AMA Design Build (AMADB) is a full-service construction management company established in 2004, emanating from its parent company, AMA Group, an industry leader in the design of MEP/FP building systems for media, broadcast and production facilities, including sound stage campuses, having a portfolio of over 1000 such completed projects, as well as a diverse array of corporate, financial, education and residential clients. AMA Group employs 200+ dedicated and talented professionals; founded in 2000 in New York City, we've grown to provide a comprehensive suite of services across national offices in New York, New Jersey, California, Florida, and Texas. **Role Responsibilities:** + Perform daily site maintenance, including sweeping, trash removal, and debris disposal into designated dumpsters + Install temporary protective coverings on floors, walls, and other finished surfaces to prevent damage during construction + Assist with general labor tasks needed to support site supervisors and tradespeople + Adhere to all safety protocols and company procedures + Travel to job sites throughout NYC, Northern NJ, and Southern CT as required **Education:** High School Diploma **Qualifications:** + Prior experience on construction sites preferred, but not required + Ability to lift 50+ lbs. and perform physically demanding tasks + Strong work ethic, attention to detail, and a team-player attitude + Reliable transportation and willingness to travel to various job sites \#LI-CM1 #LI-Onsite **The Employee Experience** People are at the heart of what we do. We're committed to a diverse, inclusive culture where employees thrive-individually and as a team-with development, wellness, and day-to-day experience front and center. We offer competitive benefits and a collaborative, fun work environment. Our team was named "Best Engineering Firm to Work" for by Best Companies Group for 2024, 2025, and 2026-a people-first standard AMA continues as they integrate with CMTA. **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **401(k) Plan with Company Match:** Currently match contributions dollar-for-dollar up to 4% of eligible pay; immediate vesting. **Health & Welfare Benefits:** Employer provided medical, dental, vision, prescription drug, Employee Assistance Program and accident & illness coverage. **Life and Disability Insurance:** Employer provided basic life insurance and AD&D valued at 50K coverage amount with the option for voluntary buy up for additional coverage. **Time Off:** Flexible non-accrual vacation; company holidays per policy. _(For California employees, this is separate from California paid sick leave, if applicable.)_ **Expenses:** Business travel and related expenses reimbursed per company policy. **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly** **Education Level** **High School** **Travel Required** **Yes**

Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Production Assembler is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our manufacturing processes by executing on our internal manufacturing and quality processes and procedures and contributing to continuous improvement and optimization efforts. This position's primary focus is to assist, contribute, and execute on the team's strategic plans for manufacturing stability and improvement. Power Connector's Production Assembler is a dynamic, adaptable, open-minded problem solver with manufacturing skills suited for individual and team contribution. This position is an integral part in sustaining and improving our manufacturing for expansion within our current industry and penetration into new industries. This position enjoys the inherent challenges of executing on manufacturing systems and processes in a diverse, dynamic, and growing organization. This position has a strong influence on the execution of the fundamental principles of deployed manufacturing processes. Responsibilities Responsible for the assembly of raw materials Responsible for the breaking down of raw materials as needed for each product Responsible for the organization of necessary components to build product Responsible for assembly of product in accordance with daily, weekly, and monthly shipment lists as directed by supervisor. Capable of manipulating items with weights less than or equal to 30 pounds Perform general housekeeping in order to maintain an extremely clean and safe environment Responsible for the safe use of tools that are required during assembly Upholding quality standards while meeting production quotas Contributes to a safe, accident-free, working environment by abiding by all safety procedures and policies as defined by the Company and OSHA regulations Assembler Level I Proficient in the assembly of product in accordance with skills matrix (assembly of ~5-25% of all products). Proficient in training of the assembly of product in accordance with skills matrix (assembly of ~5-25% of all products) Assembler Level II Proficient in the assembly of product in accordance with skills matrix (assembly of ~25-50% of all products) Proficient in training of the assembly of product in accordance with skills matrix (assembly of ~25-50% of all products) Assembler Level III Proficient in the assembly of product in accordance with skills matrix (assembly of ~50-75% of all products) Proficient in training of the assembly of product in accordance with skills matrix (assembly of ~50-75% of all products) Assembler Level IV Proficient in the assembly of product in accordance with skills matrix (assembly of ~75-100% of all products). Proficient in training of the assembly of product in accordance with skills matrix (assembly of ~75-100% of all products) Assembler Level V Proficient in the assembly of product in accordance with skills matrix (assembly of ~75-100% of all products). Proficient in training of the assembly of product in accordance with skills matrix (assembly of ~75-100% of all products) Proficient in executing quality control inspection responsibilities: Inspect, test, or measure materials, products, installations, or work for conformance to specifications Measure dimensions of products to verify conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required Conduct routine and non-routine analyses of in-process materials, raw materials, environmental samples, finished goods, or stability samples Record inspection or test data, such as weights, temperatures, grades, or moisture content, and quantities inspected or graded Mark items with details such as grade or acceptance-rejection status Interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data for release Perform visual inspections of finished products Notify supervisors or other personnel of production problems Complete documentation needed to support testing procedures, including data capture forms, equipment logbooks, or inventory forms Discard or reject products, materials, or equipment not meeting specifications Calibrate, validate, or maintain laboratory equipment Grade, classify, or sort products according to sizes, weights, colors, or other specifications Minimum Qualifications Education and Experience 1-10 years of previous manufacturing experience Knowledge Proficient in using standard assembly tools, such as screwdrivers, drills, and levers Ability to read drawings, specifications, manuals, etc. Additional qualifications for Assembler Level V: Proficient in using inspection equipment, such as calipers and micrometers Proficient in MS Office Skills Ability to work well independently and part of a team Ability to motivate team members in a creative and effective manner Ability to work effectively under stressful and dynamic environments Additional qualifications for Assembler Level V: Results-oriented with good analytical skills Salary: $16.50 - $25.00

Job Posting TitleLaborerJob Description Major Job Responsibilities/Duties Inspects materials and sorts items or materials into piles or places in bins or barrels according to type, size, condition, coloring, marking, or other characteristics Operate safety equipment and use safe work habits Operate machinery used in the production process or assist equipment operators Load and unload items from machines, conveyor and conveyances Moves reusable materials to production department or storage Separates metal particles from waste Cleaning which includes; sweeping and shoveling residual waste from process Removes waste materials from conveyor Other duties may be assigned Job Qualifications High School diploma or general education degree (GED) One year minimum experience in a heavy industrial setting or equivalent combination of education and experience Working conditions/physical demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand and reach with hands and arms. The employee is frequently required to walk; use hands to finger, handle, or feel; climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and talk or hear. The employee must regularly lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; and outside weather conditions. The employee is frequently exposed to high, precarious places and vibration. The noise level in the work environment is usually loud. Disclaimer: The above statements are statements are intended to describe the general nature and level of being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, skills. Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics.

North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies. Our products and services are used by the military, aerospace, and industrial markets, helping to advance technology and protect the free world. NAI was proud to be recognized as a Top Workplace on Long Island by Newsday! Our culture is very collaborative. We have team building events, company picnics, special event day and employee game room. Please visit our website at ******************** to see more about what makes us a unique place to work. Summary: The engineering assembler is a senior assembler with broad experience in high-complexity mechanical and electrical assembly. You work independently on all production types, supports engineering change implementation, lead training efforts, and act as a subject matter expert for troubleshooting and quality. Requirements * Serve as the go-to technical expert for mechanical and electrical assembly issues. * Collaborate with engineering teams on new designs, prototypes, and process improvements. * Take lead on high-mix, low-volume complex builds and non-standard assemblies. * Lead root cause analysis of assembly-related defects and develop corrective actions. * Perform advanced soldering (e.g., fine pitch, coaxial cable termination, PCB rework). * Champion adherence to IPC standards and conduct internal audits or checks if certified. * Coordinate training and onboarding for Levels 1 and 2; may support performance evaluations. * Suggest and implement process or tool improvements that reduce build times or improve quality. * Maintain compliance and drive best practices in ESD, safety, and ergonomic practices. * Participate in root cause analysis of assembly-related defects and work with engineering to develop corrective * actions. * Perform advanced soldering and complex reworks (e.g., fine pitch, PCB rework, test cables). Qualifications and Education Requirements * 5+ years experience in mechanical/electro-mechanical assembly roles. * Must be fluent in written English. * IPC J-STD-001 and IPC/WHMA-A-620 certifications required. Preferred Requirements * Knowledge of Lean Manufacturing principles is a plus. North Atlantic Industries offer comprehensive and competitive packages including: * Medical, Dental, and Vision Insurance * Company-provided Life and AD&D Insurance * Voluntary Supplemental Life Insurance * Long-term Disability Insurance * Flexible Spending Accounts (FSA) * Employee Assistance Program (EAP) * Tax-deferred 401K with company matching contributions * Vacation, holidays, sick * Employee tuition reimbursement * Business casual dress environment * Schedule: M-F Day Shift North Atlantic Industries (NAI) is proud to be an Equal Opportunity Employer and is committed to providing equal employment opportunity for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to any legally protected status. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at ************ or by email at ***********. As a federal government contractor, in accordance with applicable laws, regulations, and Executive Orders, North Atlantic Industries (NAI) is required to develop annual Affirmative Action Plans for Protected Veterans and Individuals with Disabilities. Any employees or applicants who wish to review the Affirmative Action Plan for Protected Veterans and Individuals with Disabilities can contact us by sending an email to *********** or by calling ************. Salary Description $25-$27 per hour

The Facilities Department of Nassau Community College (NCC) is seeking a Laborer I to perform a wide variety of unskilled manual tasks throughout the campus. Under direct supervision, the work is routine and repetitive and requires limited use of judgment. In addition, the Laborer I will: * Sweep streets, gutters, and alleys and load refuse into trucks. * Mow lawns, plants bulbs, shrubs, and trees, spread fertilizers, dig ditches, clean culverts and catch basins, and shovel snow. * Load and unload equipment and supplies. * Participate in sorting, stacking, or delivering materials, supplies, parcels, mail, or equipment. * Perform unskilled construction work including mixing of concrete and assist in building rough cement forms and assist with indoor and outside painting. * Assist with road construction, paving, and other activities, including asphalt patching, grading, and painting lines. * Operate relevant motorized equipment necessary to job assignment. * Erect signs, posts, and fences. * Assist in taking pressure, temperature, and gauge readings. * Assist in the general maintenance of equipment in sewerage or power plants. Requirements: The Laborer I should have: * Ability to learn the care and use of standard tools and equipment used in manual work activities. * Ability to follow oral instructions. * Good physical condition and health in order to perform manual labor for extended periods. Additional Information: The Laborer I position is a Grade 5, non-competitive Civil Service title. The starting salary is $34,961 per year. After one (1) year, the salary will increase to $46,337. Benefits include NYS retirement plan, health, dental, optical insurance, vacation, sick, and personal leave. Candidates must be a current resident of Nassau County for at least one (1) year.

Pay Rate: $11-$13.50 A pharmaceutical company is hiring warehouse and production workers for their facilities on Long Island. Main responsibilities include packaging pharmaceutical products following all SOPs and GMPs. The right candidate should have prior experience or interest working in this type of industry. S/he should exemplify: Good attention to detail Comfortable in a fast-paced production environment Comply with all company policies/procedures Main responsibilities include: Constructing, packing, taping, labeling, palletizing products compliant with written procedures Inspecting packages for defects Maintaining a clean and orderly environment Identifying any improvement opportunities Performing tasks following GMP guidelines and procedures Cleaned and sterilized hopper according to SOP when necessary Ensuring that packaging line is set-up and running productively following all packaging operations Additional Information All your information will be kept confidential according to EEO guidelines.

Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America's largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms , Bison , Milk for Life , and Intense Milk . Here, you'll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. We are currently seeking a Production Worker to carry out various tasks for our Production Area at our North Country Dairy Plant. Prior Material Handling a plus along with excellent communication skills. All qualified, responsible applicants are encouraged to apply. We offer a competitive salary and generous paid time off. Must be available to work weekends, holidays and any shift (1st, 2nd, 3rd). Job Description: The Production Worker- General Help is responsible for ensuring optimum quality products through the operation of various product families following regulatory standards, ensuring the product is clean and sterile. Clean, set-up, operate and monitor equipment of the production line. Complete all required documentation and scheduled quality checks. Monitor weights, seals, caps, and general packaging of product. Ability to troubleshoot and resolve basic to moderate operating difficulties. Collect required samples needed for Quality Assurance testing. Ensure that the proper packaging materials are used for each product being produced. Will have working knowledge and experience with labeler operations; watching for jams and effectively threading wrap to prevent downtime due to error. Perform filler and filler line changeovers in a safe and efficient manner. Complete cleaning checklist once line has completed run. Prepare equipment for next run to include size changes as needed. Ensure all paperwork is filled out in a clear, legible and accurate format, and completed with required information. Ensure all required information is documented in accordance with SOP's. Utilizing continuous improvement mindset, assist in identifying opportunities to improve processes Maintain a clean, sanitary and safe work area. Follow all required work safe practices. This would include wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc. Responsible for food safety, pre-requisite programs and food quality related to designated area. Report any food safety and food quality related issues to management immediately. Perform other duties as assigned. Job Requirements: Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Must be able to stand, walk, push or pull for virtually the entire shift. Must be able to lift up to 50 pounds occasionally including overhead. Must be able to work in a wet environment. Some exposure to cleaning chemicals. Must be willing to work flexible hours including overtime, weekends and holidays. Be able to effectively work in a team environment. Ability to work in a fast-paced environment. Must be a minimum of 18 years of age. Pay: $24.22/hr. *The hourly rate as indicated in the CBA. The posted pay rate reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Radienz Living is a leading North American manufacturer of home and personal care products, such as unit dose laundry and dish products, facial wipes, and baby wipes. With manufacturing plants and warehouses in Chicago and Long Island, NY, the company provides customers with private-label solutions and contract manufacturing services for products found in retail and institutional markets. Through its commitment to agility in innovation, trust and reliability, and sustainable creation, Radienz Living is passionate about providing its customers with products that support a cleaner way of living and a more radiant world. The company has undergone a remarkable transformation over the last two years, focusing on two product lines: Unit Dose products, where it is the undisputed leader in Private Label and Contract Manufacturing, and Personal Care Wipes, where it manufactures the wipes for the country's #1 beauty care brand. Background: Under the direction of the Supervisor, the Packer ensures compliance with cGMP and company policies, procedures, and specifications. Responsibilities: • Assembles, packages, seals, and labels products in accordance with established procedures and quality standards. • Examines finished packages to identify and report any defects. • Maintains a clean, organized, and safe work area at all times. • Carries out tasks in compliance with current Good Manufacturing Practices (cGMP) and standard operating procedures (SOPs). • Takes personal responsibility for adhering to safety protocols and operational guidelines. • Complies with all company and safety policies and procedures. Qualifications: • High school degree or GED, preferred. • Must be able to keep up with the line speed of machinery. • Must be able to lift at times, and able to meet volume demand etc. • Flexibility in work schedule is expected, depending on volume demands, including the possibility of weekends and/or overtime during peak periods. • Prior working knowledge in a CPG, manufacturing, packaging, or pharmaceutical industry, desired. • Understand, follow, and ensure compliance with Good Manufacturing Practices (cGMP) and adherence to defined procedures, safety rules and SOPs. • Ability to work in various weather/temperature conditions to include heat, humidity and cold. • Must work well with others. • Attention to details. Physical Demands: • Ability to frequently lift up to 20 lbs. • Constant manual dexterity use. • Required to stand for long period of time. Pay Rate: $16.50 Schedule: Monday to Friday; 8am-4:30pm Shift 1 Schedule: Monday to Friday; 8am-4:30pm

This is an exciting time to join our team. With a focus on safety, we are growing, we are profitable, we are investing in our company, and we have big plans! We are a full-service national construction, demolition, and engineering powerhouse. Job Purpose Provides abatement and demolition services to various projects involving asbestos, lead, mold, PCP's, interior demolition, and structural demolition. Must follow specific directions, wear appropriate personal protective equipment (PPE), and follow all safety procedures. Must work well in a team environment, perform tasks efficiently and follow directions. Essential Functions Asbestos abatement, lead, mold, and PCPs in various settings and environments. Performs interior demolitions of various spaces and demolishes various structures and buildings. Must be able to work from heights, in confined spaces, in hot environments and under adverse conditions. Must be able to work with various hand tools safely and effectively, powered tools, lifting devices and material movers. Must be able to travel to job locations. Must be able to lift over 20lbs Must be able to pass a background check. Required Qualifications Experience in the remediation and demolition industry. Certified/Licensed in asbestos abatement. Current Asbestos physical clearances. 10 Hour OSHA (Occupational Safety and Health Act) Certification. Must have strong English communications skills Preferred Qualifications and Education High School education, GED or equivalent. Work Environment The employee could be exposed to fumes or airborne particles. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. Must be able to walk across rugged terrain, climb substantial heights, and work over and on water. The noise level in the work environment and job sites can be loud. The position regularly requires work in outside conditions that include inclement weather, heat and humidity, and exposure to dust and asphalt. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The incumbent occasionally lifts heavy objects, walks, and stands for extended periods of time and performs strenuous physical labor under adverse field conditions. The employee lifts, pushes, pulls, or carries objects; uses abdominal and lower back muscles to provide support over time without fatigue. The position requires good manual dexterity (hand, hand with arm, two hands) and multi-limb coordination. The position requires the ability to quickly move arms and legs. Position Type / Expected Hours of Work This is a full-time position. This position occasionally requires long hours, holidays, and weekend work. Travel Travel as required for project support. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. E-Verify Please note that we participate in the Federal Employment Verification Program (E-Verify). Your employment will be contingent upon confirmation of your employment eligibility through the E-Verify Program. To confirm employment eligibility, please review the complete list of acceptable identification documents at ******************************************************* If you are extended an employment offer, you must have it available during the onboarding process. The same documents used to complete E-Verify will also need to be shown to your supervisor on the first day of orientation. Additional Information Alloy provides an excellent work environment, strong and competitive benefits, outstanding educational opportunities, and a solid career path for the employee that excels. Alloy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status.

At Standard Bots, we're revolutionizing real-world automation by making robotic systems accessible to everyone. Our AI-powered platform enables robots to tackle unprecedented challenges through an intuitive instruction interface, bringing the power of software automation to physical spaces. About the Role We're seeking an Assembly Technician to build and test our revolutionary robotic systems. This is an exciting opportunity to apply hands-on manufacturing expertise to cutting-edge robotics technology. We're looking for detail-oriented technicians ready to partner closely with our production manager and the broader engineering team to assemble systems. If you're excited about assembling precision hardware and want to be part of the team bringing next-generation robots to life, we'd love to hear from you. This role is on-site at our manufacturing facility in Glen Cove, NY. This is a first shift position (Monday-Friday, daytime hours). Note: We are unable to sponsor Visas for this role. In this role, you will: Assemble production robots and components according to specifications Report quality and process issues to Production Supervisor Maintain safe working environment following company and industry standards Manage material handling and distribution to work stations Contribute to continuous improvement initiatives Required Qualifications: High School Diploma or equivalent 2+ years experience in mass production environments 1+ year experience in assembly, maintenance/repair, and/or working with hand tools, etc. Ability to lift up to 50 lbs Strong attention to detail Effective communication skills Ability to prioritize competing tasks Collaborative team player Preferred Qualifications Associate's or Bachelor's degree Experience in automotive, aerospace, industrial, or electromechanical manufacturing Machine shop equipment experience OSHA knowledge Compensation and Benefits: This is a full-time, hourly position with a pay range of $30.00 to $36.00 per hour, depending on experience. Base salary is just one part of the overall compensation at Standard Bots. All full-time employees are eligible for employee stock options. We also offer a package of benefits including paid time off, medical/dental/vision insurance, life insurance, disability insurance, and 401(k).

Job Posting TitleLaborerJob Description Major Job Responsibilities/Duties Inspects materials and sorts items or materials into piles or places in bins or barrels according to type, size, condition, coloring, marking, or other characteristics Operate safety equipment and use safe work habits Operate machinery used in the production process or assist equipment operators Load and unload items from machines, conveyor and conveyances Moves reusable materials to production department or storage Separates metal particles from waste Cleaning which includes; sweeping and shoveling residual waste from process Removes waste materials from conveyor Other duties may be assigned Job Qualifications High School diploma or general education degree (GED) One year minimum experience in a heavy industrial setting or equivalent combination of education and experience Working conditions/physical demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand and reach with hands and arms. The employee is frequently required to walk; use hands to finger, handle, or feel; climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and talk or hear. The employee must regularly lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; and outside weather conditions. The employee is frequently exposed to high, precarious places and vibration. The noise level in the work environment is usually loud. Disclaimer: The above statements are statements are intended to describe the general nature and level of being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, skills. Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics.

Job DescriptionBenefits: Bonus based on performance Competitive salary Training & development About Us: Home Work Renovation is a boutique luxury residential interior renovation company owned and operated by 2 experienced professional builders with more than 50 years of combined field experience. For more information please visit ************************** Position Overview: We are seeking dependable and hardworking Laborers to join our team. The ideal candidates will assist with on-site installation of protection, selective & surgical interior demolition and construction, assisting carpenters with finishing tasks on luxury home renovation projects. This is a hands-on role requiring consistent attention to detail, physical stamina, and a commitment to quality work. Key Responsibilities: Assist with demolition, installation, and finishing work on high-end apartments. Load, unload, and transport materials and tools safely. Prepare job sites, including mobilizing, protection, cleaning, organizing, and ensuring safety compliance. Support skilled tradespeople (carpenters, painters, electricians, etc.) as needed. Operate hand and power tools safely and efficiently. Maintain a clean and organized work environment at all times. Follow directions from supervisors and project managers accurately. Qualifications: Previous construction or renovation experience. Ability to perform physically demanding work, including lifting and standing for long periods of time. Strong attention to detail, exercising care and caution in working around luxury finishes and commitment to quality. Reliable, clean, neat, organized, punctual and able to work in a fast-paced environment. Basic knowledge of construction tools and safety procedures. Ability to follow instructions and work well in a team.

Hamilton Connection of Milford Is currently looking to fill an opening for a first shift production - assembler, with a growing local area company. Prior manufacturing, assembly, and/or inspection experience is required. This position are full-time and offer the chance to get hired on permanently with a great company. These positions are on the 1st shift: 7:00am until 3:30pm, but overtime may be required at times. Pay Rate: $17.00 per hour to start - with an increase after training is completed. For more information please respond to this posting or you may also call our office at ************. You can also apply in person to our Milford Office - 14 Broad Street (located in downtown), Milford, CT 06460. Our office hours are Monday through Friday 8am-5pm.

Assembles, prepares and solders pipe to dimensions, as specified by layouts, work orders, or blueprints. Welds and assembles parts in accordance to drawings. Essential Duties and Responsibilities Solders metal pipes or parts together, using soldering equipment. Reviews layouts, blueprints, diagrams, or work orders in preparation for solders metal components. Cuts, prepares and welds metal skid parts according to the drawing. Selects and installs torch, torch tip and flux, according to soldering specifications or type and thickness of metal. Connects and turns regulator valves to activate and adjust gas flow and pressure to obtain desired flame. Ignites torch. Cleans and prepares parts or components in accordance to specifications prior to assembly. Heats workpiece to required temperature, using hand torch. Positions workpieces and clamps together or assembles in jigs or fixtures. Inspects finished workpiece for conformance to specifications. Cleans parts using wire brush, portable grinder, or chemical bath post brazing. Hydrostatically tests system to required pressure and inspects for leaks. Repairs any leaks that are found during the hydro test process. Spray paints piping to customer required color. Breaks down fully completed skid system and prepares it for shipping using crates and other packing materials. Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models. Performs all other functions as required. Supervisory Responsibilities None. Qualification Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education And/Or Experience High school diploma or equivalent; or six months to one year related experience and/or training; or equivalent combination of education and experience. Knowledge, Skills & Abilities: Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Mathematical Skills: Ability to apply shop math at the high school level. Reasoning Ability: Ability to define problems, collect data, establish facts, and draw valid conclusions. Physical Requirements Must be able to frequently lift and/or move up to 50 pounds, and occasionally lift weights up to 100 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus. While performing the duties of this job, the employee is frequently required to walk, sit, twist, bend, climb, balance, stoop, kneel, crouch, or crawl. Frequently required to use hands to finger, handle, feel or operate objects, tools, or controls. Frequently required to reach with hands and arms. The employee is occasionally required to talk or hear. Occasionally work in cramped spaces, and constant standing and kneeling. Must wear common protective or safety equipment May be subject to noisy machinery. Hearing protection must be worn to protect workers from excess noise. Ability to work alone and collaborate with members of crew. May need on occasion to direct helpers to complete jobs Working Conditions May require extensive work hours during peak business planning cycles. While performing the duties of this job, the employee occasionally works near moving mechanical parts or in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, toxic or caustic chemicals. The noise level in the work environment is usually noisy. HUBBELL WORK STANDARDS: * Interpersonal Skills: Demonstrates the ability to work collaboratively with stakeholders: coworkers, clients, vendors and potential customers. * Promote Culture of Safety: Demonstrates commitment to personal responsibility and value for safety; communicates safety concerns; uses and promotes safe behaviors based on training and lessons learned. * Subject to and expected to comply with all applicable Hubbell policies and procedures, including but not limited to the personnel policies. * Respect for the compliance requirements a manufacturing company faces, preferably gained through experience with government contracting regulations.

Assembles, prepares and solders pipe to dimensions, as specified by layouts, work orders, or blueprints. Welds and assembles parts in accordance to drawings. Essential Duties and Responsibilities Solders metal pipes or parts together, using soldering equipment. Reviews layouts, blueprints, diagrams, or work orders in preparation for solders metal components. Cuts, prepares and welds metal skid parts according to the drawing. Selects and installs torch, torch tip and flux, according to soldering specifications or type and thickness of metal. Connects and turns regulator valves to activate and adjust gas flow and pressure to obtain desired flame. Ignites torch. Cleans and prepares parts or components in accordance to specifications prior to assembly. Heats workpiece to required temperature, using hand torch. Positions workpieces and clamps together or assembles in jigs or fixtures. Inspects finished workpiece for conformance to specifications. Cleans parts using wire brush, portable grinder, or chemical bath post brazing. Hydrostatically tests system to required pressure and inspects for leaks. Repairs any leaks that are found during the hydro test process. Spray paints piping to customer required color. Breaks down fully completed skid system and prepares it for shipping using crates and other packing materials. Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models. Performs all other functions as required. Supervisory Responsibilities None. Qualification Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education And/Or Experience High school diploma or equivalent; or six months to one year related experience and/or training; or equivalent combination of education and experience. Knowledge, Skills & Abilities: Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Mathematical Skills: Ability to apply shop math at the high school level. Reasoning Ability: Ability to define problems, collect data, establish facts, and draw valid conclusions. Physical Requirements Must be able to frequently lift and/or move up to 50 pounds, and occasionally lift weights up to 100 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus. While performing the duties of this job, the employee is frequently required to walk, sit, twist, bend, climb, balance, stoop, kneel, crouch, or crawl. Frequently required to use hands to finger, handle, feel or operate objects, tools, or controls. Frequently required to reach with hands and arms. The employee is occasionally required to talk or hear. Occasionally work in cramped spaces, and constant standing and kneeling. Must wear common protective or safety equipment May be subject to noisy machinery. Hearing protection must be worn to protect workers from excess noise. Ability to work alone and collaborate with members of crew. May need on occasion to direct helpers to complete jobs Working Conditions May require extensive work hours during peak business planning cycles. While performing the duties of this job, the employee occasionally works near moving mechanical parts or in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, toxic or caustic chemicals. The noise level in the work environment is usually noisy. HUBBELL WORK STANDARDS: • Interpersonal Skills: Demonstrates the ability to work collaboratively with stakeholders: coworkers, clients, vendors and potential customers. • Promote Culture of Safety: Demonstrates commitment to personal responsibility and value for safety; communicates safety concerns; uses and promotes safe behaviors based on training and lessons learned. • Subject to and expected to comply with all applicable Hubbell policies and procedures, including but not limited to the personnel policies. • Respect for the compliance requirements a manufacturing company faces, preferably gained through experience with government contracting regulations.

Job Description Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Production Assembler is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our manufacturing processes by executing on our internal manufacturing and quality processes and procedures and contributing to continuous improvement and optimization efforts. This position's primary focus is to assist, contribute, and execute on the team's strategic plans for manufacturing stability and improvement. Power Connector's Production Assembler is a dynamic, adaptable, open-minded problem solver with manufacturing skills suited for individual and team contribution. This position is an integral part in sustaining and improving our manufacturing for expansion within our current industry and penetration into new industries. This position enjoys the inherent challenges of executing on manufacturing systems and processes in a diverse, dynamic, and growing organization. This position has a strong influence on the execution of the fundamental principles of deployed manufacturing processes. Responsibilities Responsible for the assembly of raw materials Responsible for the breaking down of raw materials as needed for each product Responsible for the organization of necessary components to build product Responsible for assembly of product in accordance with daily, weekly, and monthly shipment lists as directed by supervisor. Capable of manipulating items with weights less than or equal to 30 pounds Perform general housekeeping in order to maintain an extremely clean and safe environment Responsible for the safe use of tools that are required during assembly Upholding quality standards while meeting production quotas Contributes to a safe, accident-free, working environment by abiding by all safety procedures and policies as defined by the Company and OSHA regulations Assembler Level I Proficient in the assembly of product in accordance with skills matrix (assembly of ~5-25% of all products). Proficient in training of the assembly of product in accordance with skills matrix (assembly of ~5-25% of all products) Assembler Level II Proficient in the assembly of product in accordance with skills matrix (assembly of ~25-50% of all products) Proficient in training of the assembly of product in accordance with skills matrix (assembly of ~25-50% of all products) Assembler Level III Proficient in the assembly of product in accordance with skills matrix (assembly of ~50-75% of all products) Proficient in training of the assembly of product in accordance with skills matrix (assembly of ~50-75% of all products) Assembler Level IV Proficient in the assembly of product in accordance with skills matrix (assembly of ~75-100% of all products). Proficient in training of the assembly of product in accordance with skills matrix (assembly of ~75-100% of all products) Assembler Level V Proficient in the assembly of product in accordance with skills matrix (assembly of ~75-100% of all products). Proficient in training of the assembly of product in accordance with skills matrix (assembly of ~75-100% of all products) Proficient in executing quality control inspection responsibilities: Inspect, test, or measure materials, products, installations, or work for conformance to specifications Measure dimensions of products to verify conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required Conduct routine and non-routine analyses of in-process materials, raw materials, environmental samples, finished goods, or stability samples Record inspection or test data, such as weights, temperatures, grades, or moisture content, and quantities inspected or graded Mark items with details such as grade or acceptance-rejection status Interpret test results, compare them to established specifications and control limits, and make recommendations on appropriateness of data for release Perform visual inspections of finished products Notify supervisors or other personnel of production problems Complete documentation needed to support testing procedures, including data capture forms, equipment logbooks, or inventory forms Discard or reject products, materials, or equipment not meeting specifications Calibrate, validate, or maintain laboratory equipment Grade, classify, or sort products according to sizes, weights, colors, or other specifications Minimum Qualifications Education and Experience 1-10 years of previous manufacturing experience Knowledge Proficient in using standard assembly tools, such as screwdrivers, drills, and levers Ability to read drawings, specifications, manuals, etc. Additional qualifications for Assembler Level V: Proficient in using inspection equipment, such as calipers and micrometers Proficient in MS Office Skills Ability to work well independently and part of a team Ability to motivate team members in a creative and effective manner Ability to work effectively under stressful and dynamic environments Additional qualifications for Assembler Level V: Results-oriented with good analytical skills Salary: $16.50 - $25.00

Open Scientific provides contract staffing and direct hire recruitment services for the scientific, engineering, laboratory and manufacturing sectors. Job Description Packaging Line Attendant Location: Bohemia, NY Pay Rate: $11-$13.50 A pharmaceutical company is hiring warehouse and production workers for their facilities on Long Island. Main responsibilities include packaging pharmaceutical products following all SOPs and GMPs. The right candidate should have prior experience or interest working in this type of industry. S/he should exemplify: Good attention to detail Comfortable in a fast-paced production environment Comply with all company policies/procedures Main responsibilities include: Constructing, packing, taping, labeling, palletizing products compliant with written procedures Inspecting packages for defects Maintaining a clean and orderly environment Identifying any improvement opportunities Performing tasks following GMP guidelines and procedures Cleaned and sterilized hopper according to SOP when necessary Ensuring that packaging line is set-up and running productively following all packaging operations Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Radienz Living is a leading North American manufacturer of home and personal care products, such as unit dose laundry and dish products, facial wipes, and baby wipes. With manufacturing plants and warehouses in Chicago and Long Island, NY, the company provides customers with private-label solutions and contract manufacturing services for products found in retail and institutional markets. Through its commitment to agility in innovation, trust and reliability, and sustainable creation, Radienz Living is passionate about providing its customers with products that support a cleaner way of living and a more radiant world. The company has undergone a remarkable transformation over the last two years, focusing on two product lines: Unit Dose products, where it is the undisputed leader in Private Label and Contract Manufacturing, and Personal Care Wipes, where it manufactures the wipes for the country's #1 beauty care brand. Background: Under the direction of the Supervisor, the Packer ensures compliance with cGMP and company policies, procedures, and specifications. Responsibilities: • Assembles, packages, seals, and labels products in accordance with established procedures and quality standards. • Examines finished packages to identify and report any defects. • Maintains a clean, organized, and safe work area at all times. • Carries out tasks in compliance with current Good Manufacturing Practices (cGMP) and standard operating procedures (SOPs). • Takes personal responsibility for adhering to safety protocols and operational guidelines. • Complies with all company and safety policies and procedures. Qualifications: • High school degree or GED, preferred. • Must be able to keep up with the line speed of machinery. • Must be able to lift at times, and able to meet volume demand etc. • Flexibility in work schedule is expected, depending on volume demands, including the possibility of weekends and/or overtime during peak periods. • Prior working knowledge in a CPG, manufacturing, packaging, or pharmaceutical industry, desired. • Understand, follow, and ensure compliance with Good Manufacturing Practices (cGMP) and adherence to defined procedures, safety rules and SOPs. • Ability to work in various weather/temperature conditions to include heat, humidity and cold. • Must work well with others. • Attention to details. Physical Demands: • Ability to frequently lift up to 20 lbs. • Constant manual dexterity use. • Required to stand for long period of time. Pay Rate: $16.50 Schedule: Monday to Friday; 5pm-1:30am Monday to Friday; 5pm-1:30am