Line up worker jobs in Manchester, NH - 177 jobs

The City of Dover is seeking to fill a position of Laborer, (or Truck Driver, depending on current qualifications of applicant) to perform a variety of routine unskilled and semi-skilled manual labor duties involving the construction and maintenance of highways, sidewalks, and storm drainage projects. This is a full-time, 40 hour per week, non-exempt position. $19.68 to $28.44 per hour. Position is open until filled. DUTIES AND RESPONSIBILITIES (Except as specifically noted, the following functions are considered essential to this position. The listed examples may not include all duties found in this class): 1. Perform required labor involved in construction and maintenance projects as part of a crew, including pavement cutting, ditch digging, manhole and line cleaning, main and pipe repair, laying and backfilling, raising old manhole covers and catch basins to road level for street reconstruction. 2. Perform general heavy laboring duties in assisting skilled and semi-skilled workers to remove trees, mix and pour cement, lay asphalt, patch streets, install and repair water and sewer lines, clear culverts, drains, roads and ditches, maintain park facilities, mow grass, clear weeds and brush, rake and pack leaves and debris, etc. 3. Provide assistance with operation of jet truck, camera truck and other light and medium-sized construction and power equipment 4. Provide assistance with snow removal operations, either operating small trucks or sidewalk plows, or may serve as a wingman on plow. Attach and remove snow plows, sanders, and associated equipment from vehicles. 5. Assists in other activities to mitigate conditions caused by extreme weather conditions, and natural and man-made disasters. 6. Operate and perform maintenance on hand tools and other machinery which may include, but not be limited to, mowers, brush cutters, chainsaws, weed whackers, etc. 7. Occasionally performs traffic control functions at job sites. 8. Operate trucks and motorized equipment as necessary. 9. Maintain effective working relationships with other employees and the public. 10. Available 24 hours per day to meet emergency situations as required. 11. Familiar with and executes safe work procedures associated with assigned work. 12. Performs other related duties as required. KNOWLEDGE, SKILL AND ABILITY REQUIREMENTS: Basic knowledge of and the ability to use simple hand and power tools. Ability to perform simple and routine manual labor and perform one routine job for a prolonged period. Sufficient physical strength, conditioning and agility to perform strenuous manual labor for extended periods of time under adverse and varying weather and climatic conditions. EDUCATION/LICENSURE/CERTIFICATION REQUIREMENTS: High school diploma or equivalent, and one year's experience in construction, road maintenance or trade work, or and equivalent combination of education and experience which demonstrates possession of the knowledge, skills and abilities required for the position. Valid Operator's license required, CDL-B license with air brake and tanker endorsement preferred.

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 02/27/2026. Posting Job Summary (Purpose): The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders). Key Characteristics: Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policies Demonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvement Ability to function effectively as a member of a production team Duties and Responsibilities: Sort, inspect, clean, paint, label, and refill empty cylinders. Maintain a safety focus at all times and wear the proper PPE Ensure the consistent quality of cylinders are being processed Load filled cylinders onto the truck(s) for the next day's shipments. Ability to stand and walk 8 - 12 hours per day. Ability to lift 50 pounds repeatedly throughout the day. Perform general housekeeping duties. Knowledge, Skills and Abilities: Ability to follow processes, procedures, and instructions Ability to function effectively as a member of a production team Willingness to grow and learn Basic mechanical aptitude Basic computer knowledge Work in a fast-paced environment Be able to stand 8-10 hours per day Ability to obtain required state licensing Ability to be forklift certified Education and Experience Required: 1 - 2 years work experience in manufacturing is preferred High School Diploma or GED Working conditions: Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $18.50 to $19.50 per hour, depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

Job Info - Union: Line Worker 2/C (1/C T&D acceptable) NUMBER OF OPEN POSITIONS: 1 RATE RANGE: $41.79 - $52.25 Responsibilities * Safely performs all types of transmission and distribution pole line work, including climbing poles, installing or maintaining crossarms, pins, insulators, wires and cable, transformers, cutouts, lightning arrestors and related equipment. * Works on energized lines and equipment in accordance with Company's Distribution and/or Transmission Standards and Safety Regulations. * Assumes the responsibility of emergency duty with a minimum of supervision and directs the activities of lower rated workers. * Shares standby requirements of the area. * Prepares and keeps such records as may be necessary and performs other appropriate work as may be assigned. Skills and Requirements * Must be a qualified Line Worker 2/C or above. * Must have a valid Class A driver's license or able to obtain one within 12 months of accepting the position, unless you were a CMP Line Worker with a Class B driver's license prior to 7/1/2009, and a good record of safe driving. * Is subject to the Company random drug and alcohol testing policy. * Must comply with all Company safety policies and procedures * Must be capable of performing all the essential functions of the classification * Must successfully complete ongoing annual skill assessments. * Must reside within an acceptable distance (45 minutes) from the regular reporting location or be willing to relocate within nine months of transfer and be available for emergency assignments. * Competencies * Be a role model * Be agile * Collaborate and Share * Develop Self & Others * Empower to grow * Focus to achieve results * Technical Skills Company: CENTRAL MAINE POWER CO Mobility Information Please note that any applicant who is not a citizen of the country of the vacancy will be subject to compliance with the applicable immigration requirements to legally work in that country. At Avangrid we provide fair and equal employment and advancement opportunities for all employees and candidates regardless of race, color, religion, national origin, gender, sexual orientation, age, marital status, disability, protected veteran status or any other status protected by federal, state, or local law. If you are an individual with a disability or a disabled veteran who is unable to use our online tool to search for or to apply for jobs, you may request a reasonable accommodation by contacting our People and Organization department at ********************. Avangrid employees may be assigned a system emergency role and in the event of a system emergency, may be required to work outside of their regular schedule/job duties. This is applicable to employees that will work in Connecticut, Maine, Massachusetts, and New York within Avangrid Network and Corporate functions. This does not include those that will work for Avangrid Power. Avangrid employees may also be assigned a NERC Reliability Standards compliance role supporting Critical Infrastructure Protection (CIP) and/or Operations and Planning (O&P) responsibilities. This is applicable to employees that will work in electric transmission, operations, and cyber security business areas in Connecticut, Maine, Massachusetts, and New York within Avangrid Network and Corporate business areas. NERC Reliability Standards compliance roles and responsibilities may include additional access protections, training, audit engagement, and required evidence retention, and will be communicated by the employee's management. Job Posting End Date: January-30-2026

Title: Entry Level Production Worker (Sandblast) Type of Placement: Temp to hire Shift: Mon-Friday 7:30AM - 4PM Pay/Pay Range: $18-20/hr About Our Customer: Well established manufacturer in Londonderry, NH. Our client takes pride in providing a work atmosphere that is a relatively low key and temperature-controlled environment. They are an AS9100D & ISO 9001 certified company. Benefits upon Hired Perm: Medical (Company pays 70%) Dental 401K Two weeks off each July Summary: We are currently seeking a dedicated and skilled individual to join our team as an entry level Production Worker. In this role, you will be responsible for the critical process of surface cleaning cast aluminum parts for inspection. It involves using compressed air to propel abrasive material at a surface under high pressure (60 psi) in an enclosed cabinet. ESSENTIAL FUNCTIONS: Utilize high-pressure compressed air to clean cast parts to prepare for inspection. Follow established procedures and guidelines to ensure safe and efficient operation of tools and equipment. Inspect parts for defects or irregularities. Work independently to prioritize tasks and manage workload to meet production deadlines. Maintain a clean and organized work area to ensure safety and efficiency. Communicate any issues or concerns regarding equipment or materials to the supervisor. Adhere to all safety protocols and guidelines to minimize the risk of accidents or injuries. Participate in training programs to enhance skills and knowledge related to sandblast techniques. EDUCATION and/or EXPERIENCE: High school diploma or equivalent. Previous experience in a manufacturing or industrial environment, preferably in a role involving metal casting or fabrication, but not required. Strong attention to detail and ability to identify defects or irregularities in parts. Physical strength and endurance to lift and handle parts weighing up to 50 pounds routinely. Good communication skills and the ability to work independently. Willingness to work in a fast-paced environment and adapt to changing priorities. Ability to follow both written and verbal directions. Manual dexterity and good eye coordination is necessary. About Wicked Staffing Solutions: We have built long-standing relationships with some of the most reputable and well-known top companies that are hiring in manufacturing, distribution, customer service, engineering, electronics and many other industries. We offer temporary, temp-hire and direct placement opportunities, in a variety of positions. Equal Opportunity Employer

Job Description The Associate Client Representative supports the daily management of a high-volume Commercial Lines book of select business. Under the direction of a lead servicer, this position consistently provides excellent customer service to external and internal clients to ensure client satisfaction and retention. Primary Responsibilities Supports lead servicer in effectively managing a high-volume book of business ensuring all required tasks are completed accurately and on-time to meet the client needs. Set up and maintain accurate account details, contacts, and policy information in EPIC Attach, organize, and name documents in EPIC Leverage templates and system generated letters and forms to produce standard communications to clients and carriers, including BOR, client pre-renewal letters, proposal letters, change requests, etc. Endorse policy in EPIC Create activities in EPIC and assign applicable team-member. Other Responsibilities, as applicable: Order loss runs from carriers Generate and send proofs to holder, if requested (from EPIC or CSR24) Check policy per policy check workflow and complete checklist Check endorsement against request Document maintenance/retrieval Position Specific Skills/Qualifications Work Experience 0-2 years' experience in Commercial Property and Casualty Professional Licenses/Certifications Licensed or obtaining state Property & Casualty insurance license within a specified time frame Essential Skills/Competencies Knowledge of Excel, Word, and other MS Office products to include basic formatting Able to learn coverage fundamentals. Dedicated to meeting the expectations and requirements of co-workers and clients. Able to quickly find common ground and solve problems. Seeks to obtain industry information, new product information, coverage, and technology to continuously improve knowledge performance. Strong written, oral, and interpersonal communication skills. Able to follow a well-established and familiar set of activities and/or process to derive a solution. Sets priorities and manages workflow to ensure effective, timely, and efficient service delivery. Works to achieve stated objectives and delivers results at the close direction of a senior team member. Education HS Diploma or equivalent Benefits Package 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Physical Demands & Working Conditions Office work involves working at a desk most of the time, using a stand-up/sit-down adjustable desk. Exerting up to 10 pounds of force occasionally and/or negligible amount of force frequently to lift, carry, push, pull, or otherwise move objects. Typing, grasping, and repetitive motion typically is required every day, and walking and standing are required occasionally. Equal Employment Opportunity At World Insurance Associates (WIA), we celebrate and support our differences. We know employing a team rich in diverse thoughts, experiences, and opinions allows our employees, our products, and our community to flourish. WIA is honored to be an equal opportunity workplace. We are dedicated to equal employment opportunities regardless of race, color, ancestry, religion, sex, national orientation, age, citizenship, marital status, disability, gender identity, sexual orientation, or Veteran status. In addition, WIA makes reasonable accommodations to known physical or mental limitations of an otherwise qualified applicant or employee with a disability, unless the accommodation would impose an undue hardship on the operation of our business. TO EXECUTIVE SEARCH FIRMS AND STAFFING AGENCIES: World does not accept unsolicited resumes from any agencies that have not signed a mutual service agreement. All unsolicited resumes will be considered World's property, and World will not be obligated to pay a referral fee. This includes resumes submitted directly to Hiring Managers without contacting World's Human Resources Talent Department. #LI-KS1 Powered by JazzHR mBPqVafPJz

**Roles and Responsibilities:** JOB TASKS MAY INCLUDE + Setting-up and operating inspection and/or manufacturing tools/equipment such as conventional electrical discharge machines, grinders, precision assembly devices, peen machines, TIG-tack welder, heat treat, plasma spray, etc. + Performing basic mathematical calculations + Using precision gages/fixtures and inspection measuring equipment and interpreting mechanical blueprints, sketches, engineering specifications and drawings, etc., to determine set-ups and operations necessary to complete job tasks. + Training duties. + Performing related environmental, health, safety, maintenance, quality, continuous improvement, and production-flow job duties to support plant machinery, equipment, and manufacturing-related initiatives and programs. + Maintaining detailed job task documentation, reports, and records. MINIMUM QUALIFICATIONS: + High school diploma/GED with a minimum of 1-year of experience in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering; Or + Bachelor's degree, Associate's degree or Technical certificate from an accredited university or college in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering. DESIRABLE QUALIFICATIONS + Set-up and operation of machine/manufacturing tools and equipment. + Reading and interpreting mechanical blueprints, drawings, engineering specifications, etc. + Performing basic mathematical calculations. + Use of manufacturing/machine tool measuring equipment and gages. + Lean Six Sigma fundamentals. + EH&S processes and procedures. + Oral and written communication skills. + Demonstrated ability in maintaining relationships by recognizing needs and sensitivities of others, and cooperating and resolving conflicts that inspire the Team in achieving objectives and deliverables. + Demonstrated ability in receiving guidance and supervision, following work rules, safety practices, work procedures; meeting deadlines; and punctuality and attendance standards. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Our client, a busy and growing manufacturer in Alstead, NH is looking for a Production Worker to join their team! Basic math skills; counting, addition, subtraction Reading ability High level of accuracy and attention to detail Consistent attendance history Pallet jack experience a plus Ability to work effectively at a fast pace Ability to stand and lift up to 50 pounds frequently throughout the shift Benefits you will receive as the Production Worker: Temp to hire position Full time schedule Monday - Friday 6am-2:30pm Once hired on, Health/Life/Disability insurance Once hired on, 401k with company match Paid time off and holidays For the Production Worker your duties will include: Assisting Line Leaders in set up for production runs and changeovers Loading containers onto conveyor belts for filling Packaging and palletizing completed cases of product Production area and equipment cleaning as directed Reworking projects including labeling, case boxing, and repalletizing product Assisting in performing periodic inventory counts of products Reporting any quality or safety concerns to the Production Manager Are you excited for a great new opportunity in a fast paced manufacturing environment? Apply today! To apply for this position, please email your resume to *****************, call ************ or apply online at *************** We are here to help! For your convenience, Masiello Employment Services offers phone & video interviews/meetings. We can't wait to virtually meet you!

Job Description Job Title: Production Worker - Level I Pay Rate: $19.00/hour Shift: 1st Shift | [Insert hours, e.g., 6:00 AM - 2:30 PM] Schedule: Monday - Friday We are seeking a dependable and hardworking Production Worker Level I to assist with daily processing of customer orders. This entry-level role involves basic production, packaging, and warehouse tasks. Training is provided. Key Responsibilities: Prepare the production and loading areas for daily operations Use an electric pallet jack to move, stack, load, and unload products Make boxes and handle packaging materials Weigh, count, or scale products for customer orders Pack and label items according to order requirements Handle and distribute ice for storing temperature-sensitive products Clean processing areas and dispose of waste properly Monitor inventory supplies and ice machine as needed Follow safety protocols and procedures Perform other duties as assigned Qualifications: Basic understanding of warehouse or production tasks Ability to lift up to 100 lbs occasionally and 50 lbs frequently Able to work in cold environments (super freezer at -70°ree;F) Comfortable standing, bending, and lifting throughout the shift Able to operate electric pallet jacks and basic equipment (training provided) Reliable and punctual with a strong work ethic Work Environment: Cold storage and production areas May work in slippery or wet conditions Physically demanding role with heavy lifting and repetitive tasks Team-based environment with a focus on quality and efficiency Powered by JazzHR zm7647TPCd

Job Title: Production Worker - Level I Pay Rate: $19.00/hour Shift: 1st Shift | [Insert hours, e.g., 6:00 AM - 2:30 PM] Schedule: Monday - Friday We are seeking a dependable and hardworking Production Worker Level I to assist with daily processing of customer orders. This entry-level role involves basic production, packaging, and warehouse tasks. Training is provided. Key Responsibilities: Prepare the production and loading areas for daily operations Use an electric pallet jack to move, stack, load, and unload products Make boxes and handle packaging materials Weigh, count, or scale products for customer orders Pack and label items according to order requirements Handle and distribute ice for storing temperature-sensitive products Clean processing areas and dispose of waste properly Monitor inventory supplies and ice machine as needed Follow safety protocols and procedures Perform other duties as assigned Qualifications: Basic understanding of warehouse or production tasks Ability to lift up to 100 lbs occasionally and 50 lbs frequently Able to work in cold environments (super freezer at -70°F) Comfortable standing, bending, and lifting throughout the shift Able to operate electric pallet jacks and basic equipment (training provided) Reliable and punctual with a strong work ethic Work Environment: Cold storage and production areas May work in slippery or wet conditions Physically demanding role with heavy lifting and repetitive tasks Team-based environment with a focus on quality and efficiency

The Production Worker is responsible for performing all tasks involved in the production of the company's products. The individual in this position follows standard work methods and practices safe work habits to ensure production is as efficient and safe as possible. ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential function. Perform work on production line; run equipment and inspect, stack, separate, count, and pack product. Conduct quality checks and properly record information. Monitor machinery and equipment operation to ensure all product meets performance specifications and requirements. Promptly notify supervisor of any quality or production issue. Assist with changeovers. Maintain good housekeeping and regularly clean work area, machines, and equipment. Identify and contribute to continuous improvement efforts to reduce costs or increase productivity without reducing effectiveness. Maintain an open and candid working relationship with immediate supervisor/manager in discussing matters of importance. Adhere to established company values, practices, policies and procedures at all times. Follow and support compliance with all applicable safety rules, laws, regulations, and standards. Demonstrate regular and punctual attendance at the assigned work location. This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned MARGINAL FUNCTIONS The individual may be asked to perform other duties as requested. REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES An individual qualified for this job must be able to: Keep up with machine production rates. Accurately multiply, divide, add, and subtract whole numbers to resolve practical problems. Operate a computer PC proficiency; use spreadsheets and reporting software effectively. Wear/use required PPE (personal protective equipment). Understand written instruction and complete appropriate documentation as directed. Use a logical approach to troubleshooting issues and prioritizing production needs. Recognize problems when they occur and to work toward the solution of those problems. Pay attention to details and pursue quality in accomplishing work duties and tasks. Look for opportunities to reduce costs or increase productivity without reducing effectiveness. Handle challenges skillfully, thoroughly, and effectively. Effectively and professionally communicate with co-workers, team members, and internal or external customers. Present information clearly and accurately. Independently take advantage of opportunities to improve or increase skills, abilities and job knowledge. Make sure that work is delivered on time and of high quality. Develop good work practices in order to get the job done. Use equipment, resources and time in an efficient and effective manner. Use good judgment when making decisions. Perform work in a safe manner at all times. Work in a cooperative manner with management, co-workers, internal/external customers, and vendors. Do the right thing, even when it is difficult. MINIMUM EXPERIENCE, EDUCATION, AND CERTIFICATIONS Entry level position (0 to 2 years experience). Must be able to obtain forklift license through Highline Warren. PHYSICAL DEMANDS OF ESSENTIAL FUNCTIONS The physical demands described here are representative of those that must be met by an individual to successfully perform the Essential Functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Remain in a stationary position when performing line operations. Regularly move about when moving along the line as needed to perform job duties. Transport products and materials weighing up to 58 pounds when moving products to the line and or emptying boxes to the load area. Manipulate products on pallets, using force of up to 35 pounds. Position oneself to retrieve products or materials from ground level. Reach forward and overhead when inspecting product and moving pallets. Ascend/descend stairs/ladders to access the machine, catwalk, and when climbing over machinery/line. Position and handle product, boxes, and pallets. Perceive the nature of sounds and have the ability to exchange detailed information while performing job duties in a manufacturing plant where noise level is moderate to high. Move about the manufacturing facility to observe and effectively communicate with team members and perform job duties. ENVIRONMENTAL CONDITIONS The environmental conditions described here are representative of those the associate encounters while performing the Essential Functions of the job. The individual in this position will be expected to work in a manufacturing plant environment, which may include being exposed to work in high/precarious places, moving machinery, marked changes in temperature and humidity, and dust, odors and fumes. Typical noise level is loud.

Who we are: Callahan Construction Managers is a full-service construction management company based in Bridgewater MA, with regional offices in White Plains, NY. Callahan has served the New England and Northeast regions as a family business for over 70 years. As one of the region's largest open shop construction firms, Callahan provides a wide range of preconstruction and construction management services to local, regional, and national clients. Callahan enforces a high quality and innovative approach to all projects, including multi-family residential, senior housing, affordable housing, hospitality, life sciences, corporate office, educational, retail and other markets. Visit ******************** for more information. Callahan has the unique ability to self-perform work. This division is responsible for self-performing the entire General Conditions package. Controlling this scope of work allows us to provide support, control, leverage, and value opportunities, while proactively addressing issues that could impact budget and schedule. Summary/objective: Seeking a Laborer to join our growing team. Ideal candidates must have a strong work ethic and an ability to follow directions. Scopes of work include, but not limited to: General cleaning and housekeeping Field office/trailer fit out Temporary protection Temporary containment Trash out service Select demolition Safety railing and toe boards Job-built stairs and ladders Trash chutes Signage installation Traffic control and site logistics Water mitigation Winter tarping and temp enclosures Snow and ice management Temporary heat management and fueling Emergency response Punchlist Essential functions: Loading and unloading of materials, tools, and equipment Removing debris, garbage, and materials from sites Assembling and breaking down barricades, temporary structures, and scaffolding Assisting contractors, e.g. electricians and painters, as required Following all health and safety regulations Qualifications: High school diploma preferred Construction work experience preferred Reliable transportation Report to work on time Must be able to lift 50 Lbs All qualified applicants will be afforded equal opportunity. There shall be no discrimination based on race, color religion, sex, sexual orientation, gender identity, national original or on an applicant's status as a protected veteran or as individual with a disability.

Presser should have the ability to work in a fast-paced environment and have attention to detail. This position will work on the production floor and be trained to operate the robotics and computer system. Company is willing to train a hard working, reliable and honest individual. We offer great benefits, growth potential & training. Benefits include Health Insurance, paid vacation, sick and holidays, 401(k) with matching 3%, employee discount. Starting pay is $16+ based on performance and experience.

Job Title: Assembler Payrate: $18-$22/HR Job Type: Temp to hire Job Summary: Adecco has partnered up with a manufacturing company in Hudson, NH and we are seeking a detail-oriented and skilled Assembler to join our team. In this role, you will be responsible for the manual assembly of electrical components, including wire harnesses, cable assemblies, and related products. This position involves working from schematics and blueprints to cut, strip, crimp, solder, and terminate wires, ensuring all assemblies meet quality and safety standards.Key Responsibilities: Read and interpret technical drawings, schematics, and blueprints to guide assembly processes Prepare and terminate wires using appropriate tools for cutting, stripping, and connecting Assemble electrical components including wire harnesses, cables, and connectors Utilize hand tools and equipment such as crimping tools, soldering irons, and measuring instruments Perform quality control inspections on finished products to ensure compliance with specifications Follow established safety procedures and use personal protective equipment as required Communicate effectively with supervisors and team members to report progress and identify issues Required Skills and Qualifications: Proven manual dexterity and fine motor skills to work with small parts and components Strong attention to detail to ensure high-quality, error-free assemblies Ability to read and follow technical instructions and blueprints Basic math skills for measuring and calculating dimensions Working knowledge of electrical and electronic components and their functions Familiarity with workplace safety protocols and procedures Ability to thrive in a fast-paced production environment and meet deadlines Preferred Qualifications: Previous experience in electrical or cable assembly Training or certification in soldering or electronics assembly (IPC standards a plus) High school diploma or equivalent Physical Requirements: Ability to sit or stand for extended periods Ability to lift up to 25 lbs occasionally Manual handling of small tools and components If you are interested in this position or others available, please apply with an updated resume or call out Office at (603) ###-#### Pay Details: $18.00 to $22.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionThe City of Dover is seeking to fill a position of Laborer, (or Truck Driver, depending on current qualifications of applicant) to perform a variety of routine unskilled and semi-skilled manual labor duties involving the construction and maintenance of highways, sidewalks, and storm drainage projects. This is a full-time, 40 hour per week, non-exempt position. $19.68 to $28.44 per hour. Position is open until filled. DUTIES AND RESPONSIBILITIES (Except as specifically noted, the following functions are considered essential to this position. The listed examples may not include all duties found in this class): 1. Perform required labor involved in construction and maintenance projects as part of a crew, including pavement cutting, ditch digging, manhole and line cleaning, main and pipe repair, laying and backfilling, raising old manhole covers and catch basins to road level for street reconstruction. 2. Perform general heavy laboring duties in assisting skilled and semi-skilled workers to remove trees, mix and pour cement, lay asphalt, patch streets, install and repair water and sewer lines, clear culverts, drains, roads and ditches, maintain park facilities, mow grass, clear weeds and brush, rake and pack leaves and debris, etc. 3. Provide assistance with operation of jet truck, camera truck and other light and medium-sized construction and power equipment 4. Provide assistance with snow removal operations, either operating small trucks or sidewalk plows, or may serve as a wingman on plow. Attach and remove snow plows, sanders, and associated equipment from vehicles. 5. Assists in other activities to mitigate conditions caused by extreme weather conditions, and natural and man-made disasters. 6. Operate and perform maintenance on hand tools and other machinery which may include, but not be limited to, mowers, brush cutters, chainsaws, weed whackers, etc. 7. Occasionally performs traffic control functions at job sites. 8. Operate trucks and motorized equipment as necessary. 9. Maintain effective working relationships with other employees and the public. 10. Available 24 hours per day to meet emergency situations as required. 11. Familiar with and executes safe work procedures associated with assigned work. 12. Performs other related duties as required. KNOWLEDGE, SKILL AND ABILITY REQUIREMENTS: Basic knowledge of and the ability to use simple hand and power tools. Ability to perform simple and routine manual labor and perform one routine job for a prolonged period. Sufficient physical strength, conditioning and agility to perform strenuous manual labor for extended periods of time under adverse and varying weather and climatic conditions. EDUCATION/LICENSURE/CERTIFICATION REQUIREMENTS: High school diploma or equivalent, and one year's experience in construction, road maintenance or trade work, or and equivalent combination of education and experience which demonstrates possession of the knowledge, skills and abilities required for the position. Valid Operator's license required, CDL-B license with air brake and tanker endorsement preferred. Powered by JazzHR 0BOUn9AjwO

Job Info - Union: Line Worker 2/C (1/C T&D acceptable) NUMBER OF OPEN POSITIONS: 1 RATE RANGE: $41.79 - $52.25 Responsibilities * Safely performs all types of transmission and distribution pole line work, including climbing poles, installing or maintaining crossarms, pins, insulators, wires and cable, transformers, cutouts, lightning arrestors and related equipment. * Works on energized lines and equipment in accordance with Company's Distribution and/or Transmission Standards and Safety Regulations. * Assumes the responsibility of emergency duty with a minimum of supervision and directs the activities of lower rated workers. * Shares standby requirements of the area. * Prepares and keeps such records as may be necessary and performs other appropriate work as may be assigned. Skills and Requirements * Must be a qualified Line Worker 2/C or above. * Must have a valid Class A driver's license or able to obtain one within 12 months of accepting the position, unless you were a CMP Line Worker with a Class B driver's license prior to 7/1/2009, and a good record of safe driving. * Is subject to the Company random drug and alcohol testing policy. * Must comply with all Company safety policies and procedures * Must be capable of performing all the essential functions of the classification * Must successfully complete ongoing annual skill assessments. * Must reside within an acceptable distance (45 minutes) from the regular reporting location or be willing to relocate within nine months of transfer and be available for emergency assignments. Competencies * Be a role model * Be agile * Collaborate and Share * Develop Self & Others * Empower to grow * Focus to achieve results * Technical Skills Company: CENTRAL MAINE POWER CO Mobility Information Please note that any applicant who is not a citizen of the country of the vacancy will be subject to compliance with the applicable immigration requirements to legally work in that country. At Avangrid we provide fair and equal employment and advancement opportunities for all employees and candidates regardless of race, color, religion, national origin, gender, sexual orientation, age, marital status, disability, protected veteran status or any other status protected by federal, state, or local law. If you are an individual with a disability or a disabled veteran who is unable to use our online tool to search for or to apply for jobs, you may request a reasonable accommodation by contacting our People and Organization department at ********************. Avangrid employees may be assigned a system emergency role and in the event of a system emergency, may be required to work outside of their regular schedule/job duties. This is applicable to employees that will work in Connecticut, Maine, Massachusetts, and New York within Avangrid Network and Corporate functions. This does not include those that will work for Avangrid Power. Avangrid employees may also be assigned a NERC Reliability Standards compliance role supporting Critical Infrastructure Protection (CIP) and/or Operations and Planning (O&P) responsibilities. This is applicable to employees that will work in electric transmission, operations, and cyber security business areas in Connecticut, Maine, Massachusetts, and New York within Avangrid Network and Corporate business areas. NERC Reliability Standards compliance roles and responsibilities may include additional access protections, training, audit engagement, and required evidence retention, and will be communicated by the employee's management. Job Posting End Date: March-27-2026

Job DescriptionTitle: Entry Level Production Worker (Sandblast) Type of Placement: Temp to hire Shift: Mon-Friday 7:30AM - 4PM Pay/Pay Range: $18-20/hr About Our Customer: Well established manufacturer in Londonderry, NH. Our client takes pride in providing a work atmosphere that is a relatively low key and temperature-controlled environment. They are an AS9100D & ISO 9001 certified company.Benefits upon Hired Perm: Medical (Company pays 70%) Dental 401K Two weeks off each July Summary:We are currently seeking a dedicated and skilled individual to join our team as an entry level Production Worker. In this role, you will be responsible for the critical process of surface cleaning cast aluminum parts for inspection. It involves using compressed air to propel abrasive material at a surface under high pressure (60 psi) in an enclosed cabinet.ESSENTIAL FUNCTIONS: Utilize high-pressure compressed air to clean cast parts to prepare for inspection. Follow established procedures and guidelines to ensure safe and efficient operation of tools and equipment. Inspect parts for defects or irregularities. Work independently to prioritize tasks and manage workload to meet production deadlines. Maintain a clean and organized work area to ensure safety and efficiency. Communicate any issues or concerns regarding equipment or materials to the supervisor. Adhere to all safety protocols and guidelines to minimize the risk of accidents or injuries. Participate in training programs to enhance skills and knowledge related to sandblast techniques. EDUCATION and/or EXPERIENCE: High school diploma or equivalent. Previous experience in a manufacturing or industrial environment, preferably in a role involving metal casting or fabrication, but not required. Strong attention to detail and ability to identify defects or irregularities in parts. Physical strength and endurance to lift and handle parts weighing up to 50 pounds routinely. Good communication skills and the ability to work independently. Willingness to work in a fast-paced environment and adapt to changing priorities. Ability to follow both written and verbal directions. Manual dexterity and good eye coordination is necessary. About Wicked Staffing Solutions: We have built long-standing relationships with some of the most reputable and well-known top companies that are hiring in manufacturing, distribution, customer service, engineering, electronics and many other industries. We offer temporary, temp-hire and direct placement opportunities, in a variety of positions. Equal Opportunity Employer

Job Description World Insurance Associates (“World”) is a unique financial services organization with a global network of brokers and specialists who empower people to make informed decisions to improve their risk management outcomes, modernize their benefits programs, and help them achieve their long-term financial goals. Founded in 2011, World is one of the fastest-growing, Top 25 insurance brokers in the U.S. with nearly 3,000 employees in more than 300 offices across North America and the U.K. World specializes in personal and commercial insurance, surety and fidelity bonding, employee and executive benefits, investment advisory and retirement plan services, and payroll & HR solutions. Position Summary Receives guidance and/or direction, to provide support to Client Managers and/or Client Advisors, by following established workflows and procedures on routine work including ALL primary activities listed below. Primary Responsibilities Setup and maintain accurate account details, contacts, and policy information in EPIC Process renewals, endorsement, acknowledgments, cancellations and proofs of insurance Attach, organize, and name documents in EPIC Initiate endorsements, proofs of insurance and invoices Leverage templates and system generated letters and forms to produce standard communications to clients and carriers, including BOR, client pre-renewal letters, proposal letters, change request, etc. Create activities in EPIC and assign to applicable team member Other Responsibilities, as applicable May pull items such as MVR, CLUES, Risk Meters, RCE etc. Generate and send renewal proofs, if requested Check policy per policy check workflow and complete checklist Check endorsement against request Document maintenance/retrieval Other responsibilities as applicable Position Specific Skills/Qualifications Work Experience 0-2 years' experience in Personal Property and Casualty Professional Licenses/Certifications Licensed or obtaining state Property & Casualty insurance license within a specified time frame. Essential Skills/Competencies Knowledge of Excel, Word, and other MS Office products to include basic formatting Able to learn coverage fundamentals. Dedicated to meeting the expectations and requirements of co-workers and clients. Able to quickly find common ground and solve problems. Seeks to obtain industry information, new product information, coverage, and technology to continuously improve knowledge performance. Strong written, oral, and interpersonal communication skills. Able to follow a well-established and familiar set of activities and/or process to derive a solution. Sets priorities and manages workflow to ensure effective, timely, and efficient service delivery. Works to achieve stated objectives and delivers results at the close direction of a senior team member. Physical Demands & Working Conditions Office work involves working at a desk most of the time, using a stand-up/sit-down adjustable desk. Exerting up to 10 pounds of force occasionally and/or negligible amount of force frequently to lift, carry, push, pull, or otherwise move objects. Typing, grasping, and repetitive motion typically is required every day, and walking and standing are required occasionally. Equal Employment Opportunity At World Insurance Associates (WIA), we celebrate and support our differences. We know employing a team rich in diverse thoughts, experiences, and opinions allows our employees, our products, and our community to flourish. WIA is honored to be an equal opportunity workplace. We are dedicated to equal employment opportunities regardless of race, color, ancestry, religion, sex, national orientation, age, citizenship, marital status, disability, gender identity, sexual orientation, or Veteran status. In addition, WIA makes reasonable accommodations to known physical or mental limitations of an otherwise qualified applicant or employee with a disability, unless the accommodation would impose an undue hardship on the operation of our business. #LI-KS1 Powered by JazzHR 5aWQxtov3V

SummaryJob Description Roles and Responsibilities: JOB TASKS MAY INCLUDE Setting-up and operating inspection and/or manufacturing tools/equipment such as conventional electrical discharge machines, grinders, precision assembly devices, peen machines, TIG-tack welder, heat treat, plasma spray, etc. Performing basic mathematical calculations Using precision gages/fixtures and inspection measuring equipment and interpreting mechanical blueprints, sketches, engineering specifications and drawings, etc., to determine set-ups and operations necessary to complete job tasks. Training duties. Performing related environmental, health, safety, maintenance, quality, continuous improvement, and production-flow job duties to support plant machinery, equipment, and manufacturing-related initiatives and programs. Maintaining detailed job task documentation, reports, and records. MINIMUM QUALIFICATIONS: High school diploma/GED with a minimum of 1-year of experience in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering; Or Bachelor's degree, Associate's degree or Technical certificate from an accredited university or college in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering. DESIRABLE QUALIFICATIONS Set-up and operation of machine/manufacturing tools and equipment. Reading and interpreting mechanical blueprints, drawings, engineering specifications, etc. Performing basic mathematical calculations. Use of manufacturing/machine tool measuring equipment and gages. Lean Six Sigma fundamentals. EH&S processes and procedures. Oral and written communication skills. Demonstrated ability in maintaining relationships by recognizing needs and sensitivities of others, and cooperating and resolving conflicts that inspire the Team in achieving objectives and deliverables. Demonstrated ability in receiving guidance and supervision, following work rules, safety practices, work procedures; meeting deadlines; and punctuality and attendance standards. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Job Description Who we are: Callahan Construction Managers is a full-service construction management company based in Bridgewater MA, with regional offices in White Plains, NY. Callahan has served the New England and Northeast regions as a family business for over 70 years. As one of the region's largest open shop construction firms, Callahan provides a wide range of preconstruction and construction management services to local, regional, and national clients. Callahan enforces a high quality and innovative approach to all projects, including multi-family residential, senior housing, affordable housing, hospitality, life sciences, corporate office, educational, retail and other markets. Visit ******************** for more information. Callahan has the unique ability to self-perform work. This division is responsible for self-performing the entire General Conditions package. Controlling this scope of work allows us to provide support, control, leverage, and value opportunities, while proactively addressing issues that could impact budget and schedule. Summary/objective: Seeking a Laborer to join our growing team. Ideal candidates must have a strong work ethic and an ability to follow directions. Scopes of work include, but not limited to: General cleaning and housekeeping Field office/trailer fit out Temporary protection Temporary containment Trash out service Select demolition Safety railing and toe boards Job-built stairs and ladders Trash chutes Signage installation Traffic control and site logistics Water mitigation Winter tarping and temp enclosures Snow and ice management Temporary heat management and fueling Emergency response Punchlist Essential functions: Loading and unloading of materials, tools, and equipment Removing debris, garbage, and materials from sites Assembling and breaking down barricades, temporary structures, and scaffolding Assisting contractors, e.g. electricians and painters, as required Following all health and safety regulations Qualifications: High school diploma preferred Construction work experience preferred Reliable transportation Report to work on time Must be able to lift 50 Lbs All qualified applicants will be afforded equal opportunity. There shall be no discrimination based on race, color religion, sex, sexual orientation, gender identity, national original or on an applicant's status as a protected veteran or as individual with a disability.