Line up worker jobs in Santa Fe, NM - 35 jobs

Job Description CEI, a company within the BSNC family, is currently seeking a qualified Laborer - CDL for LANL C-2541. The ideal candidate will possess a Class A CDL and operate a dump truck as needed, as well as operate a variety of heavy machinery used in construction, excavation, and other related activities. This role requires a strong focus on safety, equipment maintenance, and collaboration with project teams to ensure efficient completion of tasks. We strive to contact applicants via phone or email within ten (10) business days of submittal. ESSENTIAL DUTIES & RESPONSIBILITIES The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. · Assist in the installation, repair, and replacement of waterlines and related infrastructure. · Perform manual labor such as digging, trenching, backfilling, and grading. · Operate hand and power tools, such as shovels, picks, compactors, and jackhammers. · Prepare job sites by clearing debris, unloading materials, and setting up equipment. · Follow instructions from supervisors to complete tasks in a timely and efficient manner. · Load, unload, and transport construction materials and supplies. · Assist equipment operators and other crew members as needed. · Identify and report potential hazards or issues to supervisors. · Maintain a clean and organized work environment, adhering to safety standards and protocols. · Utilize a Commercial Driver's License to operate a dump truck occasionally and as needed, along with all duties and responsibilities of operating a commercial vehicle, including securing of loads, inspection of vehicle, and strict compliance with all safety rules and regulations. QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATION To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Commercial Driver's License - Class A (required) · Familiarity with basic construction tools and equipment (required) · Ability to read and interpret instructions, blueprints, and project plans (required) · High school diploma or equivalent (preferred) · Previous experience in construction or waterline projects (preferred) Knowledge, Skills, Abilities, and Other Characteristics · Knowledge of safety practices and ability to comply with all safety regulations (required) · Good communication and teamwork skills (required) · Reliable transportation to and from job sites (required) · Ability to work in all weather conditions and on challenging terrain (required) NECESSARY PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employee must maintain a constant state of mental alertness at all times. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · Ability to lift up to 100 pounds. · Frequent bending, kneeling, standing, and working in confined spaces. · Manual dexterity and the ability to work in confined spaces or at heights as needed. · Ability to work in all weather conditions and traverse variable terrain, climb ladders/scaffolding, and stand or sit for long periods of time Essential and marginal functions may require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS · This position is subject to federal requirements regarding Department of Transportation “safety-sensitive” functions. WORK ENVIRONMENT Work Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job. · Outdoor work in diverse weather conditions. · Exposure to dust, noise, and vibrations from machinery. · Will involve working near, and operating, heavy machinery and excavation equipment. SUPERVISORY RESPONSIBILITIES · No supervisory responsibilities. ADDITIONAL QUALIFYING FACTORS As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results. If applicable to the contract, you must also obtain the appropriate clearance levels required and be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer. All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

Job DescriptionBenefits: Opportunity for advancement 401(k) 401(k) matching Paid time off Wellness resources Reads each assembly procedure and assembles products based on technical drawings. Follows procedures to complete. Ensures that parts are available to build project. Documents the part needs to ensure that all staff know of shortage. Ensures that project is complete timely for Quality Assurance and shipment. Attaches breakers, relays, contactors, bus bars, transformers, insulators, circuit boards, keypads, power supplies, plugging devices, and fuse blocks to mounting holes with bolts and screws. Cuts, strips, bends, and forms wire cable, conduit, pipe, and tubing used to connect circuits and subassemblies. Connects color-coded wires, using mirrors in compact areas. Solders connections and crimps connectors to wire ends. Tests and adjusts electrical assemblies. Each product must be tested, calibrated, and assured to be in complete and working order prior to shipment. By signing off on the QA (Quality and Assurance) report, you are personally assuring that the product is in good working order, that the product is complete, and the product has been completed within company standards, drawings, and compliance. Red lines drawings to ensure accurate assembly for each product. Date and initial changes. Ensures that documentation changes are clear and concise for CAD operator. Discusses changes to ensure that the change will not interfere with product UL, TUV or other certification. Discusses errors in diagrams or production order with supervisor or engineer to clarify assembly problems. Squares, aligns, and assembles bases, enclosure frames, or equipment structural components for milling. Ensures proper alignment. Drills and taps holes in specified locations of enclosures for mounting control units. Drills and taps holes in specified locations of back panels for mounting transformers, din rail for terminal blocks, etc. Must be able to use hole saws, drills, and other power tools, tap and die, soldering iron and other equipment as required. Must be computer literate. Manage inventory ensure stock levels are accurate and long lead items are ordered within timeframe required to maintain. Shipping and Receiving Accurately compares identifying information and counts, weighs, or measures items of incoming and outgoing shipments to verify information against bills of lading, invoices, orders, or other records. Unpacks and examines incoming shipments, rejects damaged items, records shortages, and corresponds with shipper to rectify damages and shortages. Must be organized and pay attention to detail. Assists with container assembly/construction as needed.

We are currently seeking a dedicated Production Worker to assist in the development, scale-up, and production of powders and other security-based products. The work involves operational assignments and procedures related to powder and tag production under general supervision and guidance. **Responsibilities** + Operate, maintain, clean, and troubleshoot proprietary production equipment. + Mix materials, formulate recipes, produce powders, and conduct thermal post-processing for various powder types. + Conduct wet chemistry-based synthesis of unique taggant materials. + Ensure consistent quality for long-run material campaigns. + Demonstrate flexibility to shift between high-volume manufacturing and one-off R&D sample generation. + Maintain high operating efficiency while observing the highest quality, safety, and security standards. + Assist in planning, synthesis, processing, and testing of products. **Essential Skills** + Hands-on experience in production facility + Manufacturing experience with mechanical aptitude for machines + Basic math skills and problem-solving skills + Ability to lift up to 50lbs + Computer experience + Weighing, measuring, and handling materials experience + Forklift experience is a plus **Apply today and a recruiter will reach out to you!** **Job Type & Location** This is a Contract to Hire position based out of Albuquerque, NM. **Pay and Benefits** The pay range for this position is $19.24 - $19.24/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Albuquerque,NM. **Application Deadline** This position is anticipated to close on Feb 9, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

**Requisition ID: 178854** Assist skilled craft workers in performing their assigned duties. Performs tasks that require physical labor at construction sites must have the ability to perform a variety of duties. **Experience Level** Entry **Primary Responsibilities and Duties** - Assist craftsman in setting up work as required. - Follow instructions given by superintendents, foreman and other experienced crew. - Perform all required duties with the first focus on safety. - Responsible for keeping work areas clean and in orderly conditions. - Read and understand warning signs, operating instructions for equipment, jobsite safety rules and jobsite policies. - Learn to observe functioning of installed equipment or systems to determine hazards. **Qualifications** - May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. - Must possess working knowledge skills and abilities for position. - Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision. - Ability to use hand tools, power tools and layout tools safe and efficiently. **Requirements** - The person in this position needs to constantly move about a construction/industrial site, so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl - Constantly works in a construction environment and will be exposed to changing outdoor weather conditions - Work irregular hours, weekends, overtime and holidays as required - May be required to use ladders/mechanical platforms/manlifts/scaffold to access required equipment/work areas (may exceed 200 feet), so must be able to climb and maintain balance on formwork, steel formwork, stairs, ladders and scaffolds - Move and work in and around confined and cluttered places, and uneven surfaces - Must be able to complete tasks in a noisy and dusty environment - May be required/able to move items weighing up to 50 pounds across construction/industrial site - Must have required tools - OSHA 10 Certification Required - Observe and comply with all safety and project rules, perform other duties as required - Ability to pass pre-access drug and alcohol testing **Project Information** Kiewit is one of North America's largest and most respected construction and engineering organizations. With its roots dating back to 1884, the employee-owned organization operates through a network of subsidiaries in the United States, Canada, and Mexico. Kiewit offers construction and engineering services in a variety of markets including transportation; oil, gas and chemical; power; building; marine; water/wastewater; industrial; and mining. Kiewit had 2024 revenues of $16.8 billion and employs 31,800 staff and craft employees. _We believe in equal opportunity in employment practices without discrimination, and comply with all laws regarding human rights in the provinces where we operate._ Company: TIC_Craft

Job Description About Us Durango Machining Innovations is a locally owned-operated machine shop serving regional and international customers, specialize in high-tolerance precision mill-turn machining of production jobs. We manage individual parts and assemblies, as well as jobs requiring additional vendors such as plating/anodizing, laser engraving, powder coating, sheet-metal, and plastic molding. We provide full in-house quality control, including CMM and first article inspection. Durango Machining Innovations is a growing CNC machining company focused on delivering high-precision components. We take pride in our commitment to quality, efficiency, and continuous improvement. Job Summary As a Rotational Lining Machine Operator, you will be responsible for setting up, operating, and maintaining shuttle-style rotational lining machines to apply protective liners inside pipes and fittings. You will ensure production runs safely, efficiently, and to quality standards. This role requires attention to detail, basic troubleshooting skills, and adherence to safety and procedural guidelines. Compensation $20-$30 per hour (based on experience and qualifications) Responsibilities Operate production equipment according to work instructions and schedules Prepare, measure, and handle materials used in the production process Load materials into parts and equipment as required Monitor equipment during operation to ensure proper processing and consistent quality Identify and address minor equipment or process issues to maintain efficient workflow Keep the work area, tools, and equipment clean, organized, and safe Perform routine equipment checks and report maintenance concerns to supervisors Requirements High school diploma or GED required; technical school or apprenticeship in a related field preferred. 2+ years previous experience with machine operation in a manufacturing/production environment (preferred) Ability to work independently and as part of a team. Ability to read and interpret basic technical drawings or work instructions. Willingness to learn and adapt in a fast-paced environment. Strong attention to safety, detail and quality standards Physical Requirements Ability to stand and walk for extended periods. Ability to lift up to 50 pounds and perform repetitive tasks. Comfortable working in a noisy, industrial setting. Benefits Health, dental, and vision insurance 401(k) with company match Disability and Life insurance Paid time off and paid holidays Opportunities for advancement and training Competitive hourly wage **Please include a cover letter with your application

Perform manual labor tasks in support of assigned area; assist in construction and maintenance of a wide range of City facilities and operations. s are intended to present a general list of tasks/duties performed by employees within this job classification. Job Descriptions are not intended to reflect all duties performed within the job. Minimum Education, Experience And Additional Requirements High school diploma or GED preferred. One (1) year of general maintenance or construction experience preferred. ADDITIONAL REQUIREMENTS: Possession of a valid New Mexico Driver's License, or the ability to obtain by date of hire. Possession of a City Operator's Permit (COP) within 6 months from date of hire. Preferred Knowledge * Principles and procedures of semi-skilled manual labor * Traffic laws and safe vehicle operation practices * Occupational hazards and standard safety practices * Herbicide application and equipment * Safe operating procedures in interstate highway zones Preferred Skills & Abilities * Learn basic custodial methods and techniques * Learn basic tree planting and transplanting techniques * Learn methods and techniques of supply receiving * Learn basic inventory control methods and techniques * Learn solid waste collection techniques * Learn routine vehicle maintenance and cleaning practices * Learn operational characteristics of street maintenance tools and equipment * Learn operational characteristics of Weed and Litter vehicles, tools and equipment, and their preventative maintenance * Provide instruction to co-workers, seasonal and alternative labor * Learn operational characteristics of custodial maintenance and cleaning tools and equipment * Learn basic custodial methods, techniques, and routine maintenance and cleaning procedures * Learn to perform basic street maintenance and repair tasks * Learn to perform basic maintenance and repair tasks * Learn to work independently in the absence of supervision * Learn to make minor repairs to irrigation system components and mainlines * Perform heavy manual labor for extended periods of time * Communicate clearly and concisely * Establish and maintain effective working relationships with those contacted in the course of work * Perform the essential functions of the job with or without reasonable accommodation

Job Description Laborer CTI and Associates, Inc. - Los Alamos, NM CTI and Associates, Inc. (CTI) is a provider of environmental consulting, engineering, remediation and construction services to federal, state, municipal and commercial clients across the United States. Our forty years of proven performance is a testament to CTI's ability to understand the complex issues facing our clients - and to hire and retain some of the finest talent in the industry. The Work Safely executes field craft operations (i.e., field mechanical work, miscellaneous maintenance, construction, etc.), consistent with standard acceptable practices for such work. Work may involve heavy physical labor, various mechanical equipment operations and use of hand tools in a professional craftsman like manner, while ensuring work is performed in compliance with contract specifications. Education, Experience and Requirements 4 or more years related experience is preferred. Responsible for performing inspection duties at various stages of project operations for code and contract specification compliance. Perform tasks involving physical labor at heavy construction project site. May operate hand and power tools of all types: air hammers, earth tampers, concrete mixers, shovels, rakes, surveying and measuring equipment, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces to support the sides of excavations, clean up rubble and debris. May assist other craft workers. May be flagging trucks and traffic on the construction site. Seasonal position Skills and Competencies Exhibits CTI values. Safety and quality first. Integrity and ethics. Values people. Teamwork. Innovation. Demonstrates consistent/exemplary safety compliance. Displays solid understanding of means and methods of construction activities. Demonstrates ability to perform craft labor activities/tasks at a semi-skilled to skilled level. Must be able to work constructively in diverse teams including engineers, technicians, and non-technical personnel. Additional Requirements: CTI is a Drug-Free Workplace - Must pass pre-hire drug screen. Must possess valid driver's license. Must be able to physically navigate construction sites. Must be able to lift and carry up to 40 pounds. CTI and Associates is an Equal Opportunity Employer. CTI does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. All employment is decided upon qualifications, merit, and business need. Additional Requirements: • CTI is a Drug-Free Workplace - Must pass pre-hire drug screen. • Must possess valid driver's license. • Must be able to physically navigate construction sites. • Must be able to lift and carry up to 50 pounds. Must be willing to travel 100% of the time. No relocation assistance available for this position. CTI is an Equal Opportunity Employer (EOE). Veterans Welcome! "All qualified applicants will receive consideration for employment without regard to race, age, sex, sexual orientation, gender identity, color, religion, national origin, protected veteran status, or on the basis of disability."

Company Overview: FXI is a leading producer of foam innovation in the Bedding, Furniture, Industrial, Home & Office, Healthcare, and Transportation markets. We have made it our mission to provide tailored solutions that delight our customers and consumers. With our corporate headquarters, high-tech research and development facility, and multiple manufacturing locations in North America, FXI has built a culture of innovation and achievement that is recognized by customers, suppliers and peers. Our products include finished goods, sub-assemblies, services, and raw materials for OEMs, fabricators, and retailers. You will find FXI's foam innovations inside, around, and under yourself in countless applications. Everywhere foam goes, FXI's innovations lead the way! Won't you join us? Responsibilities: * Works directly with the Pourline Manager to coordinate and implement all directives in a positive and professional manner for foam production * Safely loads, unloads, and transfers chemicals from rail cars, tankers, totes, and drums to holding tanks for production * Observes pressure gauges and flow meters, and adjusts valves to regulate speed of pumps and control pressure and rate of flow of materials * Maintains pumps and lines by replacing filters and gaskets, tightening connections, and adjusting pumps * Collects samples of material for lab analysis * Records quantity of material pumped * Inventories contents of storage tanks * Follow 5s and safety policies and procedures * Other duties, as assigned Qualifications: * Must meet all requirements of Pourline Operator 1-4 * A minimum of 3 years related experience * Able to read, write and speak English * Able to stand and walk for 8 hours * Able to read measuring devices Education / Certifications: * High school diploma or equivalent

Our thoughts and prayers are with the community of Lahaina and West Maui - especially those affected by this tragedy. Essel Environmental provides On-Demand Emergency and Disaster Response Personnel throughout the United States. The Field Hazmat Technician is responsible for the performance of tasks associated with hazardous waste clean-up, site remediation, general construction and other tasks. Job Responsibilities: * Utilize hand-tools and equipment, absorbent booms and pads to contain and remediate impacted surfaces, soils and waters. * Operate light and heavy equipment including: pumps, vacuum, oil spill boom, generators, bobcats, etc. * Perform emergency response activities including: chemical and water spills, etiological and biological contamination, tank cleaning, equipment decontamination. * Be able to meet a 12 hour night or day shift work schedule with dependability and consistency. * Other duties as assigned Qualifications: * Able to work on-call projects as well as longer term projects * Experience with pump watch, setting up gabion walls and sediment removal required * Ability to perform labor intensive activities in any weather or environmental conditions * Reliable local transportation * Ability to perform duties while adhering to safety priorities while wearing PPE, such as respirators and protective clothing' Job Types: Full-time, Contract Pay: $18.00- 20.00 per hour Schedule: * 10 hour shift * 12 hour shift * 8 hour shift Application Question(s): * Do you have a current 40 Hour Hazwoper Certificate? If so, when does it expire? Education: * High school or equivalent (Preferred) License/Certification: * OSHA 30 (Preferred) * Driver's License (Required) * Hazardous Waste Operations & Emergency Response Training (Required)

ESSENTIAL DUTIES: Operates one (1) ton trucks or smaller in a wide variety of maintenance and construction tasks, including transporting crew, and hauling materials and dirt form construction sites, spreading sand, rock, and other construction material, etc. Operates portable gasoline powered equipment; and uses a variety of hand tools, shovels, rakes, pitchforks, hand saws, jacks, lug wrenches, weed eaters, and mowers, etc. in performing manual labor assignments. Repairs curbs, gutters, and sidewalks. Operates compressors, jack hammers, cement mixers and other equipment in the construction and repair of streets. Sets forms and pours cement. Performs other laboring tasks as assigned by immediate supervisor. The normal working hours, weekends, and holidays, and must respond within thirty (30) minutes to "call out". Performs all duties in conformance to appropriate and safety and security standards. ADDITIONAL INFORMATION: BEGINNING PAY: $15.97 P/H MINIMUM REQUIRED QUALIFICATIONS: * High School Diploma or Equivalent (GED) * Two (2) years of experience in performing manual work, preferably in construction, streets, grounds maintenance or comparable occupation. * Valid Driver's License (state of residence) that meet's City's Insurability requirements. OTHER CONDITIONS: * Must pass background check APPLICATION SPECIAL INSTRUCTIONS: Please respond accurately to all questions regarding your qualifications for this position. Exempt : No Type : FT Employee Department : STREETS Location : 1840 WAREHOUSE LN., GALLUP, NM

Our thoughts and prayers are with the community of Lahaina and West Maui - especially those affected by this tragedy. Essel Environmental provides On-Demand Emergency and Disaster Response Personnel throughout the United States. The Field Hazmat Technician is responsible for the performance of tasks associated with hazardous waste clean-up, site remediation, general construction and other tasks. Job Responsibilities: Utilize hand-tools and equipment, absorbent booms and pads to contain and remediate impacted surfaces, soils and waters. Operate light and heavy equipment including: pumps, vacuum, oil spill boom, generators, bobcats, etc. Perform emergency response activities including: chemical and water spills, etiological and biological contamination, tank cleaning, equipment decontamination. Be able to meet a 12 hour night or day shift work schedule with dependability and consistency. Other duties as assigned Qualifications: Able to work on-call projects as well as longer term projects Experience with pump watch, setting up gabion walls and sediment removal required Ability to perform labor intensive activities in any weather or environmental conditions Reliable local transportation Ability to perform duties while adhering to safety priorities while wearing PPE, such as respirators and protective clothing' Job Types: Full-time, Contract Pay: $18.00- 20.00 per hour Schedule: 10 hour shift 12 hour shift 8 hour shift Application Question(s): Do you have a current 40 Hour Hazwoper Certificate? If so, when does it expire? Education: High school or equivalent (Preferred) License/Certification: OSHA 30 (Preferred) Driver's License (Required) Hazardous Waste Operations & Emergency Response Training (Required)

Responsibilities Peraton is seeking a JR Assembly Technician to support the Air Force Research Laboratory (AFRL) by improving their rapid-capability delivery process. The team will provide expertise in research and development, systems engineering, mission development, modeling and simulation, as well as ground and flight operations. Their focus will be on both large and small space technology experiments, with a primary goal of integrating sensors and payloads into a government provided satellite bus. What you'll do: Provide space technology assembly and integration support. Support spacecraft bus, payload, and experiment assembly and integration within government facilities. High-altitude balloon, payload, and experiment assembly and integration within government facilities. Assist with hardware/software procurement and other direct costs during assembly and integration. Evaluates reliability of materials, properties and techniques used in production; plans, designs, and develops electronic parts, components, and/or integrated circuitry. Under general direction, designs and develops equipment, processes and systems that involve data networks, communications, and display. Analyzes equipment specifications and process requirements to conceive a practical design. . Coordinates and consults with research engineers or scientists and customer representatives to resolve design problems. Develops and maintains technical procedures, documentation, and manuals. Compiles and analyzes operational data and directs tests to establish standard for new designs or modifications to existing equipment, systems, or processes. Qualifications Required Qualifications: 2+ years of experience with a Bachelors degree; OR Masters degree in a related field; OR 6+ years of experience in lieu of degree Previous experience working with satellite integration, technology assembly, or electronics assembly Local to Albuquerque, New Mexico with the ability to work on-site This position requires the candidate possess a minimum of Top-Secret clearance with the ability to obtain TS/SCI. The candidate must maintain the clearance. Desired Qualifications: Solid communication and collaboration skills Mission success mindset Benefits: Peraton offers enhanced benefits to employees working on this critical National Security program, which include heavily subsidized employee benefits coverage for you and your dependents, 25 days of PTO accrued annually up to a generous PTO cap and eligible to participate in an attractive bonus plan #LI-PY1 Peraton Overview Peraton is a next-generation national security company that drives missions of consequence spanning the globe and extending to the farthest reaches of the galaxy. As the world's leading mission capability integrator and transformative enterprise IT provider, we deliver trusted, highly differentiated solutions and technologies to protect our nation and allies. Peraton operates at the critical nexus between traditional and nontraditional threats across all domains: land, sea, space, air, and cyberspace. The company serves as a valued partner to essential government agencies and supports every branch of the U.S. armed forces. Each day, our employees do the can't be done by solving the most daunting challenges facing our customers. Visit peraton.com to learn how we're keeping people around the world safe and secure. Target Salary Range $66,000 - $106,000. This represents the typical salary range for this position. Salary is determined by various factors, including but not limited to, the scope and responsibilities of the position, the individual's experience, education, knowledge, skills, and competencies, as well as geographic location and business and contract considerations. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. EEO EEO: Equal opportunity employer, including disability and protected veterans, or other characteristics protected by law.

Job DescriptionDescription: Ensure all jobsites are cleaned and presentable after work is complete and assist in whatever manner the Foreman/Supervisor directs. Perform duties safely and efficiently Prepare sites to ensure tools and materials are ready Clean and maintain construction tools and equipment appropriately Load and unload equipment. Ensures that proper safety and incident reporting procedures are followed. Brings problems to the attention of their supervisor Ensure that all work is done in compliance with the company's protocols Use hand tools and equipment as instructed Attend JSA meetings daily Fill out all required paperwork daily Do whatever is reasonably necessary to complete the job in a safe and timely manner. Including but not limited to: Throw skids, clean up the site, spot for equipment, run parts and tools, count in deliveries Requirements:

At Sure Steel, Inc., we are more than just a construction company - we are builders of success, integrity, and innovation. We have established ourselves as a trusted leader in the steel fabrication and construction industry. Our commitment to excellence, safety, and customer satisfaction has earned us a reputation for delivering top-quality projects on time and within budget. Our team is dedicated to delivering innovative solutions to meet the unique needs of each project, ensuring safety, efficiency, and client satisfaction. Overview: The Laborer I will perform a variety of tasks to support construction operations, including material handling, site cleanup, and assisting skilled tradespeople. This entry-level position offers an excellent opportunity for individuals looking to gain hands-on experience in the construction industry and advance their career with a reputable company. Key Responsibilities: 1. Material Handling: - Assist with the loading and unloading of construction materials, equipment, and tools, ensuring safe and efficient handling and transportation to designated work areas. - Organize and maintain construction materials, supplies, and equipment on-site, keeping inventory well-organized and accessible to crew members. 2. Site Cleanup: - Perform general cleanup and debris removal at construction sites, including sweeping, shoveling, and disposing of waste materials in designated containers or disposal areas. - Maintain a clean and organized work environment, ensuring compliance with safety regulations and housekeeping standards. 3. Assistance to Skilled Trades: - Provide assistance and support to skilled tradespeople, such as carpenters, ironworkers, and welders, by fetching tools, materials, and equipment as needed. - Assist with simple construction tasks, such as digging trenches, pouring concrete, and setting up scaffolding, under the direction of experienced workers. 4. Safety Compliance: - Adhere to all safety protocols, procedures, and regulations, including wearing appropriate personal protective equipment (PPE) and participating in safety training sessions. - Report any safety hazards, incidents, or near misses to supervisors immediately and take appropriate corrective actions as directed. 5. Equipment Maintenance: - Assist with basic maintenance and cleaning of construction equipment, tools, and machinery, including lubricating moving parts, cleaning surfaces, and performing routine inspections. - Report any equipment malfunctions, damage, or defects to supervisors for repair or replacement. 6. Team Collaboration: - Work collaboratively with other crew members, subcontractors, and project stakeholders to ensure efficient and timely completion of construction tasks. - Communicate effectively with supervisors and team members to receive instructions, provide updates on work progress, and coordinate activities. Qualifications Qualifications: - High school diploma or equivalent work experience. - Prior experience in construction or related field is a plus but not required; on-the-job training will be provided. - Ability to lift and carry heavy objects, bend, stoop, kneel, and work in various weather conditions. - Basic knowledge of construction tools, equipment, and materials preferred. - Strong work ethic, reliability, and willingness to learn and take direction from supervisors. - Commitment to safety, with a proactive approach to identifying and mitigating hazards on the job site. Sure Steel, Inc. is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state, or local law. Core Values: Ability, Integrity Benevolence, Safety, Continuous Improvement, and Environmental Responsibility.

Job Description Furniture Assembly Tech Flexible, Part-Time Opportunity to service Your Local Office Supply Store Do you have experience assembling furniture at Office Supply Stores or similar organizations doing handy work? We want you on our team! SFS, Inc. is seeking skilled Independent Contractors to service Office Supply Stores on-site furniture showrooms, ensuring displays are set up properly and well-maintained. In-house customer assembly projects are also available. Why Join Us? Set Your Own Schedule - Work when and how often you want Be Your Own Boss - Enjoy the freedom of independent contracting Competitive Pay $16.75-$18 per hour for in-store showroom service Piece-rate pay for assembly jobs (earn more based on efficiency) DailyPay Option - Get paid the next day (free registration required) What You'll Need: Prior experience in merchandising and/or commercial furniture assembly Ability to follow client instructions and assemble products (RTA) correctly Understanding of plan-o-grams and ability to complete category resets Physical capability to lift up to 50 lbs., bend, and stand for extended periods Reliable transportation (some travel required) Personal tools for assembly work Internet access and an active email address Same-day reporting of completed work Ready to Get Started? Applying is quick and easy-Click Apply Now! SFS, Inc. is a leading supplier of field services to Fortune 1000 manufacturers and retailers in the U.S. We contract retail merchandising, auditing, installation and assembly projects in almost every zip code in the country, including Puerto Rico and the Virgin Islands. Our services are critical to sustaining the retail industry and our team of professionals are responsible for advancing it. Follow us on Social Media! Instagram: SFS Instagram Facebook: SFS Facebook Linkedin: SFS Linkedin

Job Title: Laborer Company: Xccelerated Construction Unlimited LLC About Us: At Xccelerated Construction Unlimited (XCU), we specialize in innovative pipeline and infrastructure solutions for the oil and gas industry. Our team is dedicated to delivering exceptional results for our clients and ensuring safety and efficiency at every step. We believe in the strength of a hardworking team and are looking for committed individuals to join our team. Job Summary: We are seeking a dedicated Laborer to support our pipeline construction projects. This is a hands-on role that involves working in outdoor environments, operating equipment, and assisting the team with various tasks. The ideal candidate is a motivated, safety-oriented individual with a strong work ethic. Key Responsibilities: Assist in pipeline construction activities, including site preparation, trenching, and installation. Operate hand tools and equipment safely and efficiently. Load and unload materials, supplies, and tools at job sites. Perform general maintenance of construction equipment and vehicles. Follow instructions from supervisors and adhere to all safety guidelines and company policies. Maintain a clean and organized worksite. Participate in safety meetings and contribute to a safe working environment. Be prepared to work in varying weather conditions and environments. Travel will be required with this position. Qualifications: Previous experience in construction or related field is preferred but not required. Ability to lift and carry heavy materials (80 - 100 lbs.) for extended periods. Willingness to work outdoors in all weather conditions. Strong teamwork skills and a positive attitude. Basic understanding of pipeline construction safety protocols. Valid driver's license and reliable transportation to job sites. What We Offer: Competitive hourly wage with opportunities for overtime. Opportunity for growth and advancement within the company. Supportive team environment with a focus on safety and development. Hands-on training and skills development. Why Join XCU? At XCU, we pride ourselves on our commitment to our employees. We invest in training and career development because we believe that a well-supported team is key to our success. When you join XCU, you're not just joining a company-you're joining a family that values hard work, integrity, and exceptional results.

The Production Home Assembler follows work orders and instructions in order to accurately and efficiently prepare and assemble building components and homes in a factory assembly line environment. Essential Duties and responsibilities: Operate various hand tools, power tools and equipment used to complete carpentry duties including: Circular Saw Table Saw Router Pneumatic Nail Gun (roofing, framing and finish work) Drills And other tools needed for measuring, cutting, fastening, and drilling Frame, layout and build floors Prepare, layout and build walls Layout, run and install electrical lines, switches, receptacles and panels/breaker boxes Install and prepare dry for finish tape, mud and texture Complete roof construction, decking, flashing and shingling Cabinet and or finish carpentry and trim, build and installation Installation of siding, windows and doors Painting of interior and exterior of homes Cooperate and promote a team concept with all other company employees Adhere to all rules and regulations, at all times Meet or exceed company safety standards Perform other tasks as assigned by management Minimum Qualifications: Must be at least 18 years of age Must be legally authorized to work in the United States Be able to read, write, and speak English High School diploma, preferred Knowledge, Skills and Abilities: Ability to read a tape measure Possess basic construction knowledge and comfortable using basic tools Excellent attention to detail Ability to read blueprints, a plus Ability to work in a fast-paced environment and multi-task Ability to trouble shoot and problem solve in a high-volume Versatility and willingness to transfer into various departments when necessary You must be able to communicate efficiently and clearly with other Team Members Working conditions: Continuous exposure to heat, cold, noise, and working outdoors. Must wear protective equipment while at the location Physical requirements: Requires walking, sitting, lifting, pushing, pulling and climbing to a significant degree Heavy Work-Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds or force frequently, and/or up to 10 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees as well as function safely around construction equipment Disclaimer: “This is intended to provide general information about the position. It is not an employment contract. As with all positions, the responsibilities and duties of this position may change. The company, in its discretion, may alter this job description at any time with or without notice.” EEO/AA Statement: Cavco Industries Inc., and all of its Subsidiaries are an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of sex, age, race, color, religion, physical or mental disability, creed, national origin, veteran status, sexual orientation, genetic information, gender identity, or gender expression in the programs or activities which it operates.

The Production Home Assembler follows work orders and instructions in order to accurately and efficiently prepare and assemble building components and homes in a factory assembly line environment. Essential Duties and responsibilities: Operate various hand tools, power tools and equipment used to complete carpentry duties including: Circular Saw Table Saw Router Pneumatic Nail Gun (roofing, framing and finish work) Drills And other tools needed for measuring, cutting, fastening, and drilling Frame, layout and build floors Prepare, layout and build walls Layout, run and install electrical lines, switches, receptacles and panels/breaker boxes Install and prepare dry for finish tape, mud and texture Complete roof construction, decking, flashing and shingling Cabinet and or finish carpentry and trim, build and installation Installation of siding, windows and doors Painting of interior and exterior of homes Cooperate and promote a team concept with all other company employees Adhere to all rules and regulations, at all times Meet or exceed company safety standards Perform other tasks as assigned by management Minimum Qualifications: Must be at least 18 years of age Must be legally authorized to work in the United States Be able to read, write, and speak English High School diploma, preferred Knowledge, Skills and Abilities: Ability to read a tape measure Possess basic construction knowledge and comfortable using basic tools Excellent attention to detail Ability to read blueprints, a plus Ability to work in a fast-paced environment and multi-task Ability to trouble shoot and problem solve in a high-volume Versatility and willingness to transfer into various departments when necessary You must be able to communicate efficiently and clearly with other Team Members Working conditions: Continuous exposure to heat, cold, noise, and working outdoors. Must wear protective equipment while at the location Physical requirements: Requires walking, sitting, lifting, pushing, pulling and climbing to a significant degree Heavy Work-Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds or force frequently, and/or up to 10 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees as well as function safely around construction equipment Disclaimer: “This is intended to provide general information about the position. It is not an employment contract. As with all positions, the responsibilities and duties of this position may change. The company, in its discretion, may alter this job description at any time with or without notice.” EEO/AA Statement: Cavco Industries Inc., and all of its Subsidiaries are an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of sex, age, race, color, religion, physical or mental disability, creed, national origin, veteran status, sexual orientation, genetic information, gender identity, or gender expression in the programs or activities which it operates.

Job Description Build a strong Foundation both professionally and personally with a career at KFC! We're looking for people who love serving customers, have experience in the restaurant industry and who want to be a part of the largest restaurant company in the world! If you want to build a great career while providing fast, fun and friendly service to our customers, KFC is the perfect place to learn, grow and succeed! We offer the following: A commitment to promote from within Training and mentorship programs Tuition reimbursement and scholarship opportunities Reward and recognition culture Competitive Pay Flexible schedules- day, night and evening shifts Free meal each shift Career advancement and professional development opportunities KFC Foundation Programs include FREE college tuition at WGU, $1 per $1 Savings Match Program, Hardship Assistance Program plus more! The responsibilities of the team member will include: Interaction with customers: receiving orders, processing sales and monies and managing customer issues. Preparation of products. Maintaining quality of product. Monitoring all service equipment. Uncompromising standards in maintaining a clean and safe work environment (per Labor Board and OSHA regulations and Company standards), Unloading, stocking and maintaining required inventory level. Champions recognition and motivation efforts Requirements The ideal candidates must want to have fun serving great food to our customers! Must be at least 16 years of age Accessibility to dependable and reliable transportation Excellent communication skills, management/leadership and organizational skills. Physical dexterity required (the ability to move up to 50 lbs. from one area to another). Attendance and Punctuality a must Operating of cash register as needed and making change for other cashiers. Basic Math skills Complete training certification Enthusiasm and willingness to learn Team player Commitment to customer satisfaction Strong work ethic