Line up worker jobs in Thousand Oaks, CA

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 11/24/2025. Posting Job Summary (Purpose): The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders). Key Characteristics: Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policies Demonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvement Ability to function effectively as a member of a production team Duties and Responsibilities: Sort, inspect, clean, paint, label, and refill empty cylinders. Maintain a safety focus at all times and wear the proper PPE Ensure the consistent quality of cylinders are being processed Load filled cylinders onto the truck(s) for the next day's shipments. Ability to stand and walk 8 - 12 hours per day. Ability to lift 50 pounds repeatedly throughout the day. Perform general housekeeping duties. Knowledge, Skills and Abilities: Ability to follow processes, procedures, and instructions Ability to function effectively as a member of a production team Willingness to grow and learn Basic mechanical aptitude Basic computer knowledge Work in a fast-paced environment Be able to stand 8-10 hours per day Ability to obtain required state licensing Ability to be forklift certified Education and Experience Required: 1 - 2 years work experience in manufacturing is preferred High School Diploma or GED Working conditions: Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $18.00 to $19.00 , depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

Job DescriptionBenefits: Opportunity for advancement Paid time off Training & development Our company is a national 3rd party service company providing warranty and out of warranty services for manufacturers of small appliances such as espresso makers, toaster ovens, and other countertop kitchen appliances. As a Service Line Worker, you will be responsible for the support of our servicing program and will work with our trained technicians by proficiently replacing parts in small home appliances such as espresso makers according to the diagnosis of a technician. Over time you will develop your own diagnosis and repair skills and have the opportunity to move into a full technician role. Throughout the first few months, your work will be supervised by other technicians to ensure quality of work and safety for all team members. General responsibilities will include but are not limited to: - Remove and installing components into appliances while documenting work in inventory and service computer systems this will constitute the bulk of your work - Occasionally aid in receiving, cleaning, packing, or shipping based on seasonal inbound volume changes - Generally maintain order in the facility and of equipment

At Ensign-Bickford Aerospace & Defense Company (EBAD), we believe that our strengths are built on our most important resource - our people. Join EBAD and you'll be a part of a team who creates cutting edge technology that will blast us into the future. No other company can match the innovative energetic solutions that we provide. At EBAD you will actively contribute to successful missions putting men, women and satellites into space, and protecting our armed service men and women around the world. If this is the culture and work environment you are seeking, then EBAD is the place for you! Job Description There is a position available for 2nd Shift Production Assembler with Ensign-Bickford Aerospace & Defense Company in Moorpark, CA. This is a full-time position. Work Schedule: 9/80 Schedule Monday - Thursday: 3:00 PM - 12:30 AM Friday: 2:00 PM - 10:30 PM (eight-hour shift every other Friday) General Summary: This position will report to the Shop Floor Supervisor and will be responsible for various work assignments throughout the production area. Principal Duties and Responsibilities: Performs manual/mechanized assembly operations. Responsible for adhering to all safety and quality requirements. Process specifications using hand tools, machinery, air presses, jigs and other equipment and tooling. Must be able to follow work instructions. Performs other operations such as loading and unloading components into tooling and powders into cups to press. Able to work independently with minimal supervision. Job Specifications: High school diploma or equivalent required. Must demonstrate ability to setup and monitor equipment through written and verbal instructions. Must be able to read and interpret engineering drawings and blueprints. General knowledge of GD&T, blueprint reading and inspection tools Ability to perform fine mechanical assembly including resistance welding, light machining and electrical testing Defense and Aerospace Industry experience including working knowledge of company product lines a plus Excellent verbal and written communication skills in English. Must be able to effectively communicate with all levels of management. Physical Demands and Work Environment Appropriate safety equipment as required by area. Some of the test and manufacturing areas include exposure to noise and may require hearing protection. Safety training in the handling of pyrotechnic materials is required. The physical activities of this position include work lifting up to 25 pounds occasionally, walking, standing, sitting, reaching, kneeling, repetitive motions, stooping, balancing, pushing, pulling, coordinating, talking and hearing. The physical demands and the work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status. Compensation: Hourly Range: $23.00 - $28.00 per hour. Compensation is determined by the applicant's education, experience, knowledge, skills, abilities, internal equity, and alignment with market data. Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status.

Job Description Production Laborer I M-F 6am - 2:30pm $19.00/hour Who we are Atkore is forging a future where our employees, customers, suppliers, shareholders, and communities are building better together - a future focused on serving the customer and powering and protecting the world. With a global network of manufacturing and distribution facilities, Atkore is a leading provider of electrical, safety and infrastructure solutions. Who we are looking for: We are currently looking for a Production Laborer I to be based out of Santa Paula, CA. Reporting to Production Supervisor, this person will be responsible for performing production work that includes assembling and disassembling parts, inspecting product to ensure quality as well as operating, tending, and cleaning the production area. The ideal candidate will have a one (1) year experience in a manufacturing setting. Experience in lean manufacturing or business system-based company is a plus. What you'll do: Assist with the production line Load and unload parts from machine Feed or place items onto equipment for processing Pull damaged or non-conforming parts off the line Install and uninstall tooling from product Cut and scrape waste material from parts Label, clean, pack or strap and wrap finished goods Must be able to remain in a stationary position during shift Perform Daily 5S in production work area to prevent safety hazards Be able to work with daily production schedule Take instruction from production line coordinator Read and understand the department metrics Knowledge of basic hand power tools Follow all Personal Protective Equipment (PPE) as required Continuously perform all required tasks in a safe manner, adhering to Atkore's established safety rules and procedures Be flexible and willing to adapt to change, be comfortable working in the constant changing environment Assist in meeting performance to meet Safety, Quality, Delivery, Cost and Innovation goals Attend monthly safety trainings, be an active participant in daily safety briefings, and provide feedback to improve safety program. Must embrace and foster an environment that supports our core values of Accountability, Teamwork, Integrity, Respect and Excellence. What you'll bring: High school diploma or equivalent required. One (1) year of production experience in a manufacturing setting Ability to maintain quality, safety, and effective control standards Ability to understand and follow safety procedures Ability to interpret and execute standard works Ability to read, sort, check, county and verify numbers / perform simple arithmetic Ability to detect problems and report information to appropriate personnel Ability to move objects weighing up to 50lbs Ability to multitask in a fast-paced work environment is a must Ability to familiarize and follow the 5S company program Ability to work independently and in a team when necessary. Good attendance and punctuality. Within 3 months, you'll: Complete your Atkore immersion program Understand your team and your role within the team and how it will help delivery Atkore's strategy Understand departmental standard work and Atkore's policies and procedures Understand department metrics Load and unload parts onto machine Cut/scrape waste material from product Install/Uninstall tooling from product Process and pack finished goods to next process Within 6 months, you'll: Ensure parts conform to specifications, by identifying nonconforming parts and pulling off the line Work efficiently as a team within the department to meet the daily target goal To detect problems and report information as necessary Within 12 months, you'll: Ensure full adherence to 5S practices Follow department standard work procedures, continuous quality improvement objectives, and safety and environmental policies. Atkore is a recipient of a Great Place to Work© certification and a Top Workplaces USA award! We're committed to creating an engaged and aligned workforce that drives collaborative culture. Our team strives for breakthrough results, stays focused on being standout leaders, and fully supports decisions of the Company. We consistently live the Atkore mission, strategic priorities, and behaviors, all in a way that's consistent with our core values. Together, we build strong leaders that continually endeavor to move us forward. Join our team and align yourself with an industry leader!

The Cable Assembly Operator fabricates cables and harness assemblies. Capable of reading and interpreting manufacturing and production work instructions. Maintains up to date information on production specifications in determining type, size of cables, quantity, and finished dimensions with sequence of building operations. Responsible for: Builds cable/wire harness based on simple Work Instructions (WI), drawings and other written instructions. Completes all tasks in accordance with current Celltron Process Procedures (CPP) Strip and Crimp Wires according to IPC Standard 620B. Capable of utilizing basic hand tools, able to read 6” scale and measure accurately. Executes proper pin insertion and retention. Competent in the use of tension puller and other basic test tools. Complete correct jacket prepping per instructions. Understands the basic procedures in Tinning, Lap, Lug, and Tack soldering. Presents legible, accurate records using the Daily Production Output (Form-934A) to the Supervisor. Provides legible, accurate records of production material accountability (scrap) to the Supervisor. Report any deficiencies of equipment or materials to the Lead or Supervisor. Know what to do when responding to emergency alarms and situations following established safety procedures. Maintain a clean, safe and cohesive working environment, clean work area daily. Work in cooperation with other Celltron employees promoting teamwork concept. Perform other duties and assignments as required. Qualifications: Basic knowledge of cable fabrication (Military cable fabrication a plus) Understanding of wire descriptions, codes and designations Capable of basic math functions to determine wire length and equipment setup to minimize scrap Understanding basic hand tool use, specifically reading tape measures and scales 7am-3:30 pm Monday-Friday Full time 40 hours

We are seeking a General Laborer to join our team. In this role, you will support worksite operations through manual labor tasks. This may include keeping the worksite clean through the collection of trash, packaging protein bars, working in fast paste environments or other necessary tasks. The ideal candidate is a hard worker with the ability to meet the physical demands of the job. Responsibilities Maintain a clean work environment by picking up trash, t Other manual labor tasks as required by the foreman or supervisor Report any unsafe conditions or equipment Ability to meet the physical demands of the job, including lifting heavy objects, and standing for long periods Strong attention to detail Excellent hand-eye coordination Ability to adhere to all safety rules and regulations Strong teamwork and interpersonal skills Additional certifications or apprenticeship experience is preferred but not necessary

Pay Scale: $16.50 - $17.00 Zankou Chicken is an award-winning, family-owned, fast-casual Mediterranean restaurant chain with eight locations in Southern California. At Zankou, we serve quality, natural, and uniquely delicious Mediterranean meals at an affordable price and with “WOW” level guest experience. Position Summary: Prepare, cook different food products for our restaurants. What you'll do: · Cook garbanzo beans · Cook items on the grill · Bake · Cutting vegetables · Washing vegetables · Prepare/Process sauces (Hummus, Tahini, Garlic Sauce, Mutabbal) · Follow proper prep list and keep up with production schedule · Prep ingredients to be used in producing commissary products · Follow health codes and sanitation procedures · Maintains cleanliness and safety in assigned work are by squeegeeing floors, wiping off tables, sweeping, emptying trash containers · Pack/prepare made products in a cooler room · Safe and efficient use of industrial food preparation equipment · Maintain a safe work area · Assist in other assigned duties · Weekly prep and warehouse cleaning What we're looking for: · Must possess a current California Food Handlers Card · Must be able to lift and move up to 50lbs · Must be able to work in hot and cold environments What we offer: · Complimentary meals every working day · Fun and challenging environment in a growing company · Working with a brand that has a great reputation for its products and services

Immediate Opportunity: Assembly Worker- Wheelchair Manufacturing in Torrance, CA, Must have manufacturing background. Assembly - Chair Dresser Pay Rate: $17.87 per hour Hours: 6:00 AM to 2:30 PM Key Requirements: Must have at least 1 year assembly experience Must have experience working in a production environment Must be able to lift up to 50lbs Must be computer literate Must have experience using power tools Must be able to read blueprints & read assembly instructions Must e responsibe, reliable, dependable and trainable Must have a sense of urgency Qualifications: 1+ years experience in medical device or similar regulated industry (electronics, aerospace, pharma) Dependable and eager to learn Strong work ethic and reliability Bilingual preferred but not required/ Must understand English #HSSB

Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! PROPULSION ASSEMBLY TECHNICIAN I/II Based out of Rocket Lab's Headquarters in Long Beach, CA the Propulsion Assembly Technician is responsible for building sub-assemblies for the Rutherford rocket engine. The engine consists of a thrust chamber, pumps, valves, plumbing, TVC actuators, motor controllers, and other mechanical components. You will support the Propulsion Production Manager and Production organization, with deliverables required for internal leadership, board of directors, and investors. (Please note: this position can be hired at the Propulsion Assembly Technician I or Propulsion Assembly Technician II level) WHAT YOU'LL GET TO DO: Work on a high caliber cross functional team Test rocket hardware Build turbo pumps and rocket engines. Watch the hardware you build make fire and go to space. YOU'LL BRING THESE QUALIFICATIONS AS A PROPULSION ASSEMBLY TECHNICIAN I: 2+ years of mechanical assembly experience in aviation, aerospace, or similar industry Talented with mechanical assembly tools (i.e.: pressure testing equipment and welding preparation) Talented with electrical assembly tools (i.e.: bench testing and measuring instruments) High school diploma or GED. YOU'LL BRING THESE QUALIFICATIONS AS A PROPULSION ASSEMBLY TECHNICIAN II: 5+ years of mechanical assembly experience in aviation, aerospace, or similar industry Talented with mechanical assembly tools (i.e.: pressure testing equipment and welding preparation) Talented with electrical assembly tools (i.e.: bench testing and measuring instruments) High school diploma or GED. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: 8+ years of mechanical assembly and/or mechanical fitting experience Experience performing; torquing, safety and/or lock wire installation, assembly per work instructions, and environment tests (proof and leak). . A&P, trade, or industry certified. Experience with in-space mechanical assemblies preferred. Knowledgeable in manufacturing processes and continued product development. ADDITIONAL REQUIREMENTS Willing to work Monday - Thursday (5:30am - 3:30pm or 3:15pm - 1:45am) Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position Able to lift up to 25lbs. unassisted Must be able to climb ladders and be comfortable working in tight spaces. Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. Must be able to walk or stand for extended periods - 8 hours min Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$25-$40 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

We are seeking a hardworking and reliable Pallet Laborer to join our team. The ideal candidate will be responsible for the safe and timely loading and unloading of materials and products in a fast-paced distribution center environment. This role requires attention to detail, adherence to safety protocols, and the ability to work collaboratively with team members to ensure operational efficiency. Responsibilities: Safely load and unload materials and products from trucks and containers. Operate forklifts and other heavy equipment as needed for material handling. Build pallets and organize products for efficient storage and transportation. Maintain a clean and organized work area in accordance with OSHA regulations. Load, unload, and stack pallets manually or with equipment. Inspect pallets for damage and repair or recycle as needed. Use hand tools, power tools, and machinery to assemble, disassemble or refurbish pallets. Maintain a clean and organized work area. Follow all company safety policies and procedures. Assist in inventory management and quality control. Perform other duties as assigned by supervisors. Qualifications: Ability to lift up to 40 pounds repeatedly throughout the shift. Knowledge of OSHA standards related to warehouse operations. Experience in materials handling within a warehouse or distribution center setting. Proficient in heavy equipment operation, including forklifts. Ability to work in varying temperatures and warehouse conditions. Strong attention to detail and ability to follow instructions. Reliable, punctual, and able to work well in a team environment. Compensation: $18.00 per hour Built on a foundation of great brands and employees with a passion for service, our vision is to be the leading provider of essential services through empowered people, world-class customer service and convenient access. By joining ServiceMaster, you'll be part of a talented network of employees with a shared vision. Our environment is a diverse community where successful people work together to achieve common goals. This franchise is independently owned and operated by a ServiceMaster Clean franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this location should be made directly to the franchisee, and not to The ServiceMaster Company, LLC.

**About Crane:** Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You'll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS). Every 1.2 seconds, product built at our Crane Aerospace & Electronics Burbank facility is stopping aircraft - delivering passengers and military personnel safely to their destination. Home to our Landing & Cabin Systems team, Crane A&E's brake control systems and premium cabin actuation solutions are flying on tens of thousands of aircraft throughout the world. You'll join a business with a long track record of engineering excellence, set in the wonderful town of Burbank filled with great community atmosphere, schools, weather and no shortage of entertainment. Start the next chapter of your career with Crane Aerospace & Electronics! **Job Summary:** The Production Assembler I works under supervision performing assigned assembly processes to manufacture Crane Aerospace & Electronics products in accordance with military and/or other assembly standards using visual aids, verbal and/or written instructions. **THIS OPPORTUNITY IS A TEMP-HIRE OPPORTUNITY.** **Essential Functions:** + Perform assigned assembly tasks + Prepare components prior to assembly, clean components, mark, and inspect components, sub-assemblies, or completed assemblies + Test finished assemblies + Set up and operate assigned equipment and machinery + Observe proper health and safety procedures in handling hazardous chemicals + Identify and report to lead or supervisor any difficulty which would affect the correctness and quality of the work in process + Participate in cleaning of area and machinery and take part in team meetings for improvement + Complete job-related company training courses + Support Crane Business System (CBS) initiatives including 5S, KPI's, Standard Work, Problem Solving, and other initiatives as they arise + Flexible and willing to work overtime if necessary + Any other task assigned by supervisor or management + Understand and/or participate with internal/external audits + Perform inventory cycle counts + May be required to repair/rework defective or returned assemblies **Minimum Qualifications:** + Experience: 0-2 years of Assembly experience in a manufacturing environment + Knowledge: Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods + Skills: Strong verbal and written communication; Proficiency in reading comprehension (understanding written sentences and paragraphs in work related documents) of the English language; Basic computer skills (understanding of basic software) + Abilities: Accurate color vision, near vision, and depth perception and other vision capabilities required; Manipulative skills, including finger and manual dexterity; Adept hand-eye coordination and arm-hand steadiness; Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams; Ability to work well in a moderate to high paced work environment in a high-volume setting + Education/Certification: High School diploma or equivalent + **Eligibility Requirement:** This position requires access to controlled data or information and therefore only US persons will be considered. As a US Department of Defense contractor we are bound by the International Traffic in Arms Regulations ( _ITAR_ ). **Preferred Qualifications:** + IPC Soldering Certification or equivalent basic soldering experience **Working Conditions:** + Working conditions are normal for a manufacturing environment + Manufacturing operations may require the use of safety equipment ( **_P_** _ersonal_ **_P_** _rotective_ **_E_** _quipment_ ) to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required _PPE_ + May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes + Standing: 25% *percentage is approximate and may vary depending on work task + Sitting: 75% *percentage is approximate and may vary depending on work task + Lifting (in pounds): Up to 40 pounds + Pushing (in pounds): Up to 40 pounds + Mental/Visual: Use of soldering equipment, microscopes/magnifying glasses + Workspace: Assembly Cell **Eligibility Requirement:** This position requires access to controlled data or information and therefore only US persons will be considered. As a US Department of Defense contractor, we are bound by the International Traffic in Arms Regulations (ITAR). **Hourly Compensation Rate: $18.93/hr. - 22.00/hr.** Several factors contribute to actual salary, including location, experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Some roles may be eligible for participation in performance-based bonus programs. **As a team member at Crane Aerospace and Electronics, you'll enjoy:** + **Benefits:** Health care, dental, vision, life and disability insurance starting the first day of the month + **Time Off:** 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year. + **401k Retirement Plan:** 401k plan with company match + **Education Reimbursement:** eligible after 90 days of employment You can see a list of our benefits at *************************************** or visit our website at *************** for more information on our company and great opportunities. We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value. In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool. _This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job._ _Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status._ At Crane, we believe that attracting and retaining the highest quality people is the best insurance of success. Our goal is to recruit talented people and train them within a culture that calls for performance with trust and respect. Join us. The unique backgrounds and differences of our associates make us stronger, more capable, and more successful. Beyond an associate's base compensation, we reward and reinforce wellbeing with a compelling package of both cash and non-cash benefits, including comprehensive health, wellness incentives, assistance with retirement savings, paid time off, paid holidays, and tuition reimbursement - as well as performance-based bonus programs for certain positions. Crane prioritizes career development for our associates. All associates receive an annual development plan that includes a mixture of on-the-job coaching and formal training experiences to support individual development needs. We firmly believe in associate growth that supports career progression and we will proactively support your ongoing career development.

Job DescriptionDescription: COMPANY DESCRIPTION: Union Rescue Mission (URM) is a 501(c)(3) nonprofit organization located in the Los Angeles Metropolitan Area. We are dedicated to serving men, women, and children experiencing homelessness and providing comprehensive emergency and long-term services to help them escape the dangerous streets of Skid Row. Established in 1891, URM is now one of the largest rescue missions of its kind in the United States and the oldest in Los Angeles. Join us at Union Rescue Mission as we bring hope and share the compassion of Christ to those devastated by homelessness. POSITION SUMMARY: Under the supervision of the Thrift Store Manager, the Thrift Store Floor Production Worker (Part-Time) is responsible for assisting the production crew in cleaning, prep, and tagging merchandise such as bric-a-brac, books, electronics, shoes, accessories, household items, etc. CORE WORK PRINCIPLE: Colossians 3:23 is the foundation of URM's standard for employment, “Whatever you do, work at it with all your heart, as though you were working for the Lord and not for people.” The goal for each employee is to enrich and sustain a humble heart attitude; to enrich and sustain a mindset of serving others, treating them with kindness and truth; and to enrich and sustain a zealous desire for achieving work objectives without any ulterior motives or agendas. THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) ESSENTIAL FUNCTIONS: Cleans, tags, and packs merchandise for pricing. Determines which items are perishable and which are recyclable and discards unsellable items. Assists other departments/positions, as needed. Sets the pace for sorting. Records production numbers daily. (i.e., carts, units, etc.) Communicates regularly with management about store issues. Actively engages customers on floor sales to increase donations and merchandise sales. Ensures monthly revenue goals are met. Provides excellent customer service by greeting and assisting customers and donors; and responds to customer inquiries/complaints in a timely manner. Ensures store and displays are maintained, clean, and attractive. Maintains safety including all Health and Security policies and procedures. Conducts tasks and other projects as assigned by the Store Manager. Commitment to URM mission, vision, and core values. Encourages guests in their faith and growth in Jesus Christ. THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) PHYSICAL DEMANDS: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to allow differently able individuals to perform the essential functions of the job. Must be able to lift 50 lbs. Requires manual dexterity for regular repetitive finger motion such as frequent reaching, pulling, pushing and lifting objects and operating equipment. Requires manual ability to operate a pallet jack. May be exposed to handling hazardous materials such as broken glass. THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) WORK ENVIRONMENT: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to allow differently able individuals to perform the essential functions of the job within the environment. The office is clean, orderly, properly lighted, and ventilated. This position works predominantly indoors in a store, warehouse, or dock environment all of which are high traffic settings involving people, equipment and/or machinery. May be exposed to dust in the performance of certain duties. Noise levels are considered moderate to high. Requires regular standing, walking, sitting, crouching, stooping, speaking, hearing, and seeing. May be exposed to extreme temperatures both hot and cold (variable weather). Requirements: THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) EXPERIENCE/EDUCATION/LICENSURES/CERTIFICATIONS: High school diploma or equivalent, required. Thrift store, warehouse, assembly line or restaurant experience, a plus. THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) KNOWLEDGE/ SKILLS/ ABILITIES: Fluency in Spanish, both verbal and written, a plus. Ability to demonstrate a strong work ethic. Perform in a fast-paced environment and possess strong organizational skills. Ability to determine the value of donations. Must exhibit strong customer service skills. Clear communication skills, both written and oral. Excellent time management skills and detail oriented. Ability to multi-task in a high-volume environment. Must be an effective team member. Must be able to work a flexible schedule, including weekends.

TempToFT Why Partner with Us Visions Staffing Solutions has partnered with a manufacturing company in the city of Rancho Dominguez. If you're looking for a great temp to hire opportunity, this may a job for you. Your Role Includes Machine Operation Bottling and labeling Loading the machine Complete batch records and logs Perform basic quality checks What We're Looking For At least 1 year of manufacturing experience Must be comfortable working in a lab environment Bilingual (English/Spanish) Basic computer skills Able to lift up to 50 lbs. HS Diploma/GED Job Details 1 st shift (6AM to 2:30PM) Apply now or call us at (657) 810-1441

Job Description DCX-CHOL Enterprises is a privately held American owned Small Business. We are made up of five vertically integrated manufacturing and assembly divisions, each with their own history, specializations and products. Each division compliments the other with their unique skills and products and at the same time, each work together as a vertically integrated team to provide the most cost effective, high-quality interconnect products to our customers on time. Teletronic Division of DCX-CHOL Enterprises Inc. is seeking experienced Production Assemblers with the following qualifications: POSITION DESCRIPTION: With supervision, perform basic and routine assembly operations on components, and subassemblies in accordance with military, aerospace and or other assembly standards using visual aids and verbal written instructions. RESPONSIBILITIES: •Crimping techniques •Solder/Crimp splicing •Connector assembly •Boot/Sleeving connectorization •Contact loading •Hardware connectorization •Wire routing techniques •Use of cable assembling hand and power tools such as heat guns, hand crimpers, screw drivers etc. •Use of rulers and tape measure. EXPERIENCE / KNOWLEDGE REQUIRED: JOB QUALIFICATIONS / REQUIREMENTS: •Cable/Harness Assembly in Aerospace and Military Applications •Connector Assembly Experience in Commercial and Military Applications, Soldering Experience per MIL-STD-2000, IPC-610, IPC-620 and/or J-Std-001-Class 3. •Ability to Read & Interpret Blueprints, Schematics, Traveler/Routers, Bills of Material & Wire Lists. •Must be able to understand and follow verbal instructions and be detailed oriented. •Maintain a clean, safe well organized work-station through routine housekeeping. •Familiarity with continuous-improvement techniques. •Good eyesight •Excellent finger dexterity •MIL-STD experience preferred •IPC certification preferred •NASA certification preferred Job Safety Analysis: Normal work time spent indoors A neat and tidy personal appearance must be maintained; repetitive hand movement Occasional periods of high levels of physical exertion needed, this includes heavy lifting (50+ lb.), walking, bending, pushing large loads, carrying, stooping, reaching, etc. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. DCX-CHOL Enterprises Inc. is an Equal Opportunity Employer; employment with DCX-CHOL Enterprises Inc. is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. DCX-CHOL Enterprises Inc. will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization via E-Verify.

This opportunity is located within our Ensign-Bickford Aerospace & Defense Company business, a global leader of mission-critical hardware and systems solutions including precision energetics systems and innovative explosive solutions.Click here to learn more. Job Description There is a position available for 2nd Shift Production Assembler with Ensign-Bickford Aerospace & Defense Company in Moorpark, CA. This is a full-time position. Work Schedule: 9/80 Schedule Monday - Thursday: 3:00 PM - 12:30 AM Friday: 2:00 PM - 10:30 PM (eight-hour shift every other Friday) General Summary: This position will report to the Shop Floor Supervisor and will be responsible for various work assignments throughout the production area. Principal Duties and Responsibilities: Performs manual/mechanized assembly operations. Responsible for adhering to all safety and quality requirements. Process specifications using hand tools, machinery, air presses, jigs and other equipment and tooling. Must be able to follow work instructions. Performs other operations such as loading and unloading components into tooling and powders into cups to press. Able to work independently with minimal supervision. Job Specifications: High school diploma or equivalent required. Must demonstrate ability to setup and monitor equipment through written and verbal instructions. Must be able to read and interpret engineering drawings and blueprints. General knowledge of GD&T, blueprint reading and inspection tools Ability to perform fine mechanical assembly including resistance welding, light machining and electrical testing Defense and Aerospace Industry experience including working knowledge of company product lines a plus Excellent verbal and written communication skills in English. Must be able to effectively communicate with all levels of management. Physical Demands and Work Environment Appropriate safety equipment as required by area. Some of the test and manufacturing areas include exposure to noise and may require hearing protection. Safety training in the handling of pyrotechnic materials is required. The physical activities of this position include work lifting up to 25 pounds occasionally, walking, standing, sitting, reaching, kneeling, repetitive motions, stooping, balancing, pushing, pulling, coordinating, talking and hearing. The physical demands and the work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status. Compensation: Hourly Range: $23.00 - $28.00 per hour. Compensation is determined by the applicant's education, experience, knowledge, skills, abilities, internal equity, and alignment with market data. Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status.

Job DescriptionBenefits: Free food & snacks Key Responsibilities Handle raw materials and finished goods on the production line. Assist in assembling, packing, and labeling products. Operate and monitor production equipment safely and efficiently. Inspect products for quality assurance and remove defective items. Maintain a clean and organized work area in compliance with safety and sanitation guidelines. Follow all company policies, food safety standards, and regulatory requirements. Report equipment malfunctions or safety concerns to the supervisor immediately. Collaborate with team members to meet daily and weekly production targets. Perform other related duties as assigned by the supervisor. Qualifications Ability to stand for long periods and perform repetitive tasks. Must be able to lift, carry, and move materials up to 50 lbs. Attention to detail and commitment to quality and safety. Strong teamwork and communication skills. Flexible to work shifts, weekends, or overtime as required

ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! PROPULSION ASSEMBLY TECHNICIAN I/II Based out of Rocket Lab's Headquarters in Long Beach, CA the Propulsion Assembly Technician is responsible for building sub-assemblies for the Rutherford rocket engine. The engine consists of a thrust chamber, pumps, valves, plumbing, TVC actuators, motor controllers, and other mechanical components. You will support the Propulsion Production Manager and Production organization, with deliverables required for internal leadership, board of directors, and investors. (Please note: this position can be hired at the Propulsion Assembly Technician I or Propulsion Assembly Technician II level) WHAT YOU'LL GET TO DO: * Work on a high caliber cross functional team * Test rocket hardware * Build turbo pumps and rocket engines. * Watch the hardware you build make fire and go to space. YOU'LL BRING THESE QUALIFICATIONS AS A PROPULSION ASSEMBLY TECHNICIAN I: * 2+ years of mechanical assembly experience in aviation, aerospace, or similar industry * Talented with mechanical assembly tools (i.e.: pressure testing equipment and welding preparation) * Talented with electrical assembly tools (i.e.: bench testing and measuring instruments) * High school diploma or GED. YOU'LL BRING THESE QUALIFICATIONS AS A PROPULSION ASSEMBLY TECHNICIAN II: * 5+ years of mechanical assembly experience in aviation, aerospace, or similar industry * Talented with mechanical assembly tools (i.e.: pressure testing equipment and welding preparation) * Talented with electrical assembly tools (i.e.: bench testing and measuring instruments) * High school diploma or GED. THESE QUALIFICATIONS WOULD BE NICE TO HAVE: * 8+ years of mechanical assembly and/or mechanical fitting experience * Experience performing; torquing, safety and/or lock wire installation, assembly per work instructions, and environment tests (proof and leak). . * A&P, trade, or industry certified. * Experience with in-space mechanical assemblies preferred. * Knowledgeable in manufacturing processes and continued product development. ADDITIONAL REQUIREMENTS * Willing to work Monday - Thursday (5:30am - 3:30pm or 3:15pm - 1:45am) * Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position * Able to lift up to 25lbs. unassisted * Must be able to climb ladders and be comfortable working in tight spaces. * Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. * Must be able to walk or stand for extended periods - 8 hours min * Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only) $25-$40 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Requirements THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) EXPERIENCE/EDUCATION/LICENSURES/CERTIFICATIONS: High school diploma or equivalent, required. Thrift store, warehouse, assembly line or restaurant experience, a plus. THRIFT STORE FLOOR PRODUCTION WORKER (PART-TIME) KNOWLEDGE/ SKILLS/ ABILITIES: Fluency in Spanish, both verbal and written, a plus. Ability to demonstrate a strong work ethic. Perform in a fast-paced environment and possess strong organizational skills. Ability to determine the value of donations. Must exhibit strong customer service skills. Clear communication skills, both written and oral. Excellent time management skills and detail oriented. Ability to multi-task in a high-volume environment. Must be an effective team member. Must be able to work a flexible schedule, including weekends. Salary Description $17.87 - $19.40 (depending on experience)

DCX-CHOL Enterprises is a privately held American owned Small Business. We are made up of five vertically integrated manufacturing and assembly divisions, each with their own history, specializations and products. Each division compliments the other with their unique skills and products and at the same time, each work together as a vertically integrated team to provide the most cost effective, high-quality interconnect products to our customers on time. Teletronic Division of DCX-CHOL Enterprises Inc. is seeking experienced Production Assemblers with the following qualifications:POSITION DESCRIPTION:With supervision, perform basic and routine assembly operations on components, and subassemblies in accordance with military, aerospace and or other assembly standards using visual aids and verbal written instructions.RESPONSIBILITIES:•Crimping techniques•Solder/Crimp splicing•Connector assembly•Boot/Sleeving connectorization•Contact loading•Hardware connectorization•Wire routing techniques•Use of cable assembling hand and power tools such as heat guns, hand crimpers, screw drivers etc.•Use of rulers and tape measure.EXPERIENCE / KNOWLEDGE REQUIRED:JOB QUALIFICATIONS / REQUIREMENTS:•Cable/Harness Assembly in Aerospace and Military Applications•Connector Assembly Experience in Commercial and Military Applications, Soldering Experience per MIL-STD-2000, IPC-610, IPC-620 and/or J-Std-001-Class 3.•Ability to Read & Interpret Blueprints, Schematics, Traveler/Routers, Bills of Material & Wire Lists.•Must be able to understand and follow verbal instructions and be detailed oriented.•Maintain a clean, safe well organized work-station through routine housekeeping.•Familiarity with continuous-improvement techniques.•Good eyesight•Excellent finger dexterity•MIL-STD experience preferred•IPC certification preferred•NASA certification preferred Job Safety Analysis:Normal work time spent indoorsA neat and tidy personal appearance must be maintained;repetitive hand movement Occasional periods of high levels of physical exertion needed, this includes heavylifting (50+ lb.), walking, bending, pushing large loads, carrying, stooping, reaching, etc.ITAR REQUIREMENTS:To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.DCX-CHOL Enterprises Inc. is an Equal Opportunity Employer; employment with DCX-CHOL Enterprises Inc. is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.DCX-CHOL Enterprises Inc. will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization via E-Verify.