Line up worker jobs in Yonkers, NY

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The incumbent is responsible for the maintenance and repair of buildings and grounds. The incumbent will possess a basic knowledge of electrical and all hazards. Primary Duties/Responsibilities: Assist the skilled trade's employees in performing operations and maintenance on plant equipment and buildings. Perform preventive maintenance functions, including, but not limited to lubrication of equipment. Disassemble and repack pumps. Perform custodial and clean-up work on plant grounds including cutting grass, snow removal and trash pick-up. Perform custodial work in buildings including, but not limited to, sweeping, mopping, waxing, buffing, washing windows scrubbing walls and vacuuming. Perform manual labor functions as assigned. Perform minor maintenance services on vehicles and equipment including, but not limited to, washing, tightening chains, replacing cables and bolts, checking tire inflation and performing lubrication according to the manufacturers' recommended schedules. Perform regular checks of equipment condition, noting deficiencies and following maintenance scheduling procedures, schedule the necessary maintenance or replacement. Clean and prepare surfaces to be painted. Apply paint and varnish to buildings and equipment. Perform sign lettering skills as assigned. Recommend materials and supplies needed both to advise management on specific applications and to maintain inventory. Provide coverage for Bio-Solids Loader in the event of Staffing issues, Observe all on-the-job safety regulations. Other related tasks as assigned. Work Environment: Work is performed both inside and outside with exposure to all kinds of weather conditions. Incumbents may be occasionally exposed to some noise, silica, dust, fumes, smoke, gasses, greases, oils, electrical energy, solvents and vibration. Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, ladder/scaffolding, below ground and may be exposed to water or other liquid materials. Maintain a high level of focus on health, safety and environment, ensuring safety within all activities. Qualifications Education/Experience/Background: High School Diploma/GED is required. At least one (1) year of related trade experience. Minimum (2) year on job site training. Knowledge/Skills/Abilities: Able to utilize materials, methods, tools and equipment used in the day-to-day maintenance of buildings and grounds. Ability to adhere to all policies and regulations regarding safety. Ability to communicate written and orally. Knowledge or/and ability to safely operate all hand or power tools equipment related to the job. Ability to manipulate and understand the required functions of the Computerized Maintenance Management System (CMMS). Vehicle and Heavy Equipment Operations : Pickup Truck(s) Forklift or other Powered Industrial Truck Cranes - Mobile and Truck Crane Required Certification/Licenses/Training: Hold and maintain a NYS driver's license - Commercial Driver's License Preferred and the ability to meet risk management guidelines. Must be familiar with all safety regulations and be prepared to work in and supervise confined space entry, and LOTO procedures (Training provided). Additional Information Pay Range: $20.14 to $27.20 per hour. Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

**CMTA (formerly AMA Group), a Legence company** CMTA is one of the fastest-growing engineering firms in the U.S., known for sustainable, high-performance building systems and complex MEP/FP delivery. Through AMA's design expertise in media, broadcast, and production facilities-and CMTA's national portfolio in education, healthcare, and zero-energy projects-we pair deep technical craft with an innovative, collaborative culture that accelerates careers. **Title:** Construction Laborer **Location:** Project sites across NYC, Northern New Jersey, and Southern Connecticut **Reports to:** Site Superintendents **Position Overview:** AMA Design Build is seeking a reliable and hardworking Construction Laborer to support daily operations on high-end residential and commercial construction projects. This hands-on role is essential to maintaining clean, safe, and organized job sites, as well as protecting newly installed finishes and existing structures. **Who We Are?** AMA Design Build (AMADB) is a full-service construction management company established in 2004, emanating from its parent company, AMA Group, an industry leader in the design of MEP/FP building systems for media, broadcast and production facilities, including sound stage campuses, having a portfolio of over 1000 such completed projects, as well as a diverse array of corporate, financial, education and residential clients. AMA Group employs 200+ dedicated and talented professionals; founded in 2000 in New York City, we've grown to provide a comprehensive suite of services across national offices in New York, New Jersey, California, Florida, and Texas. **Role Responsibilities:** + Perform daily site maintenance, including sweeping, trash removal, and debris disposal into designated dumpsters + Install temporary protective coverings on floors, walls, and other finished surfaces to prevent damage during construction + Assist with general labor tasks needed to support site supervisors and tradespeople + Adhere to all safety protocols and company procedures + Travel to job sites throughout NYC, Northern NJ, and Southern CT as required **Education:** High School Diploma **Qualifications:** + Prior experience on construction sites preferred, but not required + Ability to lift 50+ lbs. and perform physically demanding tasks + Strong work ethic, attention to detail, and a team-player attitude + Reliable transportation and willingness to travel to various job sites \#LI-CM1 #LI-Onsite **The Employee Experience** People are at the heart of what we do. We're committed to a diverse, inclusive culture where employees thrive-individually and as a team-with development, wellness, and day-to-day experience front and center. We offer competitive benefits and a collaborative, fun work environment. Our team was named "Best Engineering Firm to Work" for by Best Companies Group for 2024, 2025, and 2026-a people-first standard AMA continues as they integrate with CMTA. **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **401(k) Plan with Company Match:** Currently match contributions dollar-for-dollar up to 4% of eligible pay; immediate vesting. **Health & Welfare Benefits:** Employer provided medical, dental, vision, prescription drug, Employee Assistance Program and accident & illness coverage. **Life and Disability Insurance:** Employer provided basic life insurance and AD&D valued at 50K coverage amount with the option for voluntary buy up for additional coverage. **Time Off:** Flexible non-accrual vacation; company holidays per policy. _(For California employees, this is separate from California paid sick leave, if applicable.)_ **Expenses:** Business travel and related expenses reimbursed per company policy. **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly** **Education Level** **High School** **Travel Required** **Yes**

We are currently looking for a Laborer to join our facility in Jersey City, NJ. Major Job Responsibilities/Duties Inspects materials and sorts items or materials into piles or places in bins or barrels according to type, size, condition, coloring, marking, or other characteristics Operate safety equipment and use safe work habits Operate machinery used in the production process or assist equipment operators Load and unload items from machines, conveyor and conveyances Moves reusable materials to production department or storage Separates metal particles from waste Cleaning which includes; sweeping and shoveling residual waste from process Removes waste materials from conveyor Other duties may be assigned Job Qualifications High School diploma or general education degree (GED) One year minimum experience in a heavy industrial setting or equivalent combination of education and experience Working conditions/physical demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand and reach with hands and arms. The employee is frequently required to walk; use hands to finger, handle, or feel; climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and talk or hear. The employee must regularly lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; and outside weather conditions. The employee is frequently exposed to high, precarious places and vibration. The noise level in the work environment is usually loud. Additional Comments Disclaimer: The above statements are statements are intended to describe the general nature and level of being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, skills. With a promote-from-within philosophy and a variety of programs available to support continuous learning, Balcones Recycling offers the opportunity for a rewarding career. We are committed to the ecologically sound and sustainable use of resources and strive to operate in a manner that minimizes waste and protects the environment. A career with Balcones Recycling provides you with the opportunity to work with an organization whose goal is to be the world's safest and most responsible recycling company. Our people achieve this by creating a zero-harm workplace, being exemplary members of the communities in which we operate and being responsible stewards of the environment. We also offer competitive pay and a range of attractive benefits. Find Out More… Please visit Balcones Resources - Sustainable Future Through Recycling (balconesrecycling.com) for more information on Balcones Recycling and its commitment to sustainability. Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics.. Job Type: Full-time Pay: $22.23 per hour Benefits: Dental insurance Health insurance Vision insurance Paid time off Sick Time off 401K Annuity Shift: 8 hour shift plus overtime Ability to commute/relocate: Jersey City, NJ 07305: Reliably commute or planning to relocate before starting work (Required) Work Location: In person - Jersey City, NJ

Spectrum Painting in Pompton Lakes, NJ is actively seeking a detail-oriented full-time Skilled Laborer - Painter to properly complete various paint jobs through prepping, application, clean up, and effectively using ladders and paint materials. Does beginning a career in the paint industry excite you? Are you self-motivated and goal-oriented? Do you have the desire to work with a company that values and respects you? If yes, read on about this job! This paint tech position earns a top pay of $21.00 - $29,00 an hour, based on skills and experience. We provide benefits, including health insurance, paid time off and a 401(k) plan. Additionally, we offer our Skilled Laborer - Painter paid training, retirement plans, bonuses, overtime/time and half, and advancement opportunities. If this sounds like the right paint tech opportunity for you, apply today! ABOUT SPECTRUM PAINTING Spectrum Painting is a full-service painting company in Pompton Lakes, New Jersey that provides valuable, high-quality interior and exterior painting services and concrete coatings to the needs of home and business owners. We're passionate about turning a house into a home. The needs of our clientele are always first priority with quality and sustainable materials that are everlasting, and a courteous service that is forever remembered. Our employees are all equally valuable and we ensure recognition and appreciation for the joint skyrocketing success that takes place. For their hard work and dedication, we provide thriving benefits and a supportive company culture. SKILLED LABORER - PAINTER QUALIFICATIONS Valid driver's license and transportation At least 1 year of experience Able to learn quickly Active listening skills Willing to grow Must comply with our policies, including a tobacco-free work environment Comfortable with heights Are you proud of your hard work and effort? Is being dependable, professional, and a team player at the heart of all you do? Are you able to manage your time effectively? Can you multitask? If yes, we want to meet you! ARE YOU READY TO JOIN OUR PAINT TECH TEAM? If you feel you'll be perfect as our Skilled Laborer - Painter, apply now using our initial 3-minute, mobile-friendly application. Location: 07442 We are not affiliated with Spectrum Painting in NY.

Benefits: Health insurance Paid time off Training & development We are looking to employ an efficient and hard-working Warehouse Forklift/Production Operator to process all incoming and outgoing merchandise according to established warehouse guidelines. Responsibilities * Report any broken, damaged, or malfunctioning warehouse equipment to management, taking inventory of all warehouse merchandise, and ensuring that fragile merchandise is suitably packed to prevent damage during transit. You should also be able to perform basic cleaning duties to keep the warehouse tidy. To be successful as a warehouse operator, you should be detail-oriented, adept at operating forklifts, and able to stand for extended periods. Ultimately, an outstanding warehouse operator should adhere to all warehouse safety practices as well as demonstrate exceptional organizational, time management, and communication skills. A production worker is responsible for operating and maintaining equipment in a factory or warehouse and preparing items for distribution. The job description of a production worker involves assembling and checking product parts, ensuring that all machinery runs smoothly, and assisting in the shipment of items. This is a temp to perm position with opportunity of full-time hire. M-F from 8am to 5pm $20/hr.

** Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. **Job Description** **Position Purpose:** The incumbent is responsible for the maintenance and repair of buildings and grounds. The incumbent will possess a basic knowledge of electrical and all hazards. **Primary Duties/Responsibilities:** + Assist the skilled trade's employees in performing operations and maintenance on plant equipment and buildings. Perform preventive maintenance functions, including, but not limited to lubrication of equipment. Disassemble and repack pumps. + Perform custodial and clean-up work on plant grounds including cutting grass, snow removal and trash pick-up. Perform custodial work in buildings including, but not limited to, sweeping, mopping, waxing, buffing, washing windows scrubbing walls and vacuuming. + Perform manual labor functions as assigned. + Perform minor maintenance services on vehicles and equipment including, but not limited to, washing, tightening chains, replacing cables and bolts, checking tire inflation and performing lubrication according to the manufacturers' recommended schedules. + Perform regular checks of equipment condition, noting deficiencies and following maintenance scheduling procedures, schedule the necessary maintenance or replacement. + Clean and prepare surfaces to be painted. Apply paint and varnish to buildings and equipment. Perform sign lettering skills as assigned. + Recommend materials and supplies needed both to advise management on specific applications and to maintain inventory. + Provide coverage for Bio-Solids Loader in the event of Staffing issues, + Observe all on-the-job safety regulations. + Other related tasks as assigned. **Work Environment:** + Work is performed both inside and outside with exposure to all kinds of weather conditions. + Incumbents may be occasionally exposed to some noise, silica, dust, fumes, smoke, gasses, greases, oils, electrical energy, solvents and vibration. + Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, ladder/scaffolding, below ground and may be exposed to water or other liquid materials. + Maintain a high level of focus on health, safety and environment, ensuring safety within all activities. **Qualifications** **Education/Experience/Background:** + High School Diploma/GED is required. + At least one (1) year of related trade experience. + Minimum (2) year on job site training. **Knowledge/Skills/Abilities:** + Able to utilize materials, methods, tools and equipment used in the day-to-day maintenance of buildings and grounds. + Ability to adhere to all policies and regulations regarding safety. + Ability to communicate written and orally. + Knowledge or/and ability to safely operate all hand or power tools equipment related to the job. + Ability to manipulate and understand the required functions of the Computerized Maintenance Management System (CMMS). + Vehicle and Heavy Equipment Operations : + Pickup Truck(s) + Forklift or other Powered Industrial Truck + Cranes - Mobile and Truck Crane **Required Certification/Licenses/Training:** + Hold and maintain a NYS driver's license - Commercial Driver's License Preferred and the ability to meet risk management guidelines. + Must be familiar with all safety regulations and be prepared to work in and supervise confined space entry, and LOTO procedures (Training provided). **Additional Information** **Pay Range:** $20.14 to $27.20 per hour. **Benefits:** Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

At Standard Bots, we're revolutionizing real-world automation by making robotic systems accessible to everyone. Our AI-powered platform enables robots to tackle unprecedented challenges through an intuitive instruction interface, bringing the power of software automation to physical spaces. About the Role We're seeking an Assembly Technician to build and test our revolutionary robotic systems. This is an exciting opportunity to apply hands-on manufacturing expertise to cutting-edge robotics technology. We're looking for detail-oriented technicians ready to partner closely with our production manager and the broader engineering team to assemble systems. If you're excited about assembling precision hardware and want to be part of the team bringing next-generation robots to life, we'd love to hear from you. This role is on-site at our manufacturing facility in Glen Cove, NY. This is a first shift position (Monday-Friday, daytime hours). Note: We are unable to sponsor Visas for this role. In this role, you will: Assemble production robots and components according to specifications Report quality and process issues to Production Supervisor Maintain safe working environment following company and industry standards Manage material handling and distribution to work stations Contribute to continuous improvement initiatives Required Qualifications: High School Diploma or equivalent 2+ years experience in mass production environments 1+ year experience in assembly, maintenance/repair, and/or working with hand tools, etc. Ability to lift up to 50 lbs Strong attention to detail Effective communication skills Ability to prioritize competing tasks Collaborative team player Preferred Qualifications Associate's or Bachelor's degree Experience in automotive, aerospace, industrial, or electromechanical manufacturing Machine shop equipment experience OSHA knowledge Compensation and Benefits: This is a full-time, hourly position with a pay range of $30.00 to $36.00 per hour, depending on experience. Base salary is just one part of the overall compensation at Standard Bots. All full-time employees are eligible for employee stock options. We also offer a package of benefits including paid time off, medical/dental/vision insurance, life insurance, disability insurance, and 401(k).

Production Line Worker The production line worker will be able to work on the production line with consistent speed and accuracy while maintaining production standards and work towards improving productivity without compromising quality. Supervisory Responsibilities: None Essential Duties and Responsibilities: Perform production duties such as Packing, and manual lifting. Verify the product is sealed, has correct smart date label and packaged correctly. Move product and inventory using a hand jack. Report defective materials or questionable conditions to the department supervisor Maintain the work area and equipment in a clean and orderly condition and follow prescribed safety regulations Perform related duties as required by supervision May be moved to other lines as workload requires Complies with all Company and Federal Policies, Procedures and Regulations Achieve departmental KPIs Job Description may change with or without prior notice Education and/or Work Experience Requirements: Good verbal and written communication skills, including ability to effectively communicate with Supervisor and other employees. Ability to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices. Good Work Ethic, Sense of Responsibility, Hardworking, Energetic. Physical Requirements: May be required to stand for long periods of time May involve some repetitive motions Must be able to lift up to 50 pounds May also engage in frequent bending, stooping, squatting, pushing and pulling of parts and part containers Must be able to work in a cold environment Good Work Ethic, Sense of Responsibility, Hardworking, Energetic Benefits offered to our employees: Medical, Vision, Dental, Long Term Disability and Life Insurance 401(K) after 1 month of service Vacation Days, paid Holidays and paid Sick Time Employee Referral Program Safety Training

Seeking dedicated construction laborers for a commercial project in Bronx, NY. You will be responsible for supporting the foreman and jobsite. Construction Laborer Responsibilities: Operate and care for construction equipment and machines. Help equipment operators, brick masons, and other skilled labor when necessary. Prep construction sites by cleaning obstacles and hazards. Load or unload construction materials. Put together and take apart temporary structures, such as scaffolding. Remove, fill, or compact earth. Follow instructions from foreman. Assist craft workers. Ready to learn from on-the-job training when necessary. Perform site clean-up. Follow all safety procedures on the job site and report violations immediately to foreman. Construction Laborer Requirements: Be at least 18 years of age. Ability to do physical labor for extended periods of time. Ability to work in all weather. Must be punctual and reliable. Preferred experience in the construction industry. Completion of or willing to complete Site Safety Training (SST) Multiple positions available. Job length may vary from 1 month to 1 year, depending on project schedule. Pay from $15-$20/hr, based on experience.

Job Posting TitleLaborerJob Description Major Job Responsibilities/Duties Inspects materials and sorts items or materials into piles or places in bins or barrels according to type, size, condition, coloring, marking, or other characteristics Operate safety equipment and use safe work habits Operate machinery used in the production process or assist equipment operators Load and unload items from machines, conveyor and conveyances Moves reusable materials to production department or storage Separates metal particles from waste Cleaning which includes; sweeping and shoveling residual waste from process Removes waste materials from conveyor Other duties may be assigned Job Qualifications High School diploma or general education degree (GED) One year minimum experience in a heavy industrial setting or equivalent combination of education and experience Working conditions/physical demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand and reach with hands and arms. The employee is frequently required to walk; use hands to finger, handle, or feel; climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and talk or hear. The employee must regularly lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; and outside weather conditions. The employee is frequently exposed to high, precarious places and vibration. The noise level in the work environment is usually loud. Disclaimer: The above statements are statements are intended to describe the general nature and level of being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, skills. Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics.

Job DescriptionBenefits: Bonus based on performance Competitive salary Training & development About Us: Home Work Renovation is a boutique luxury residential interior renovation company owned and operated by 2 experienced professional builders with more than 50 years of combined field experience. For more information please visit ************************** Position Overview: We are seeking dependable and hardworking Laborers to join our team. The ideal candidates will assist with on-site installation of protection, selective & surgical interior demolition and construction, assisting carpenters with finishing tasks on luxury home renovation projects. This is a hands-on role requiring consistent attention to detail, physical stamina, and a commitment to quality work. Key Responsibilities: Assist with demolition, installation, and finishing work on high-end apartments. Load, unload, and transport materials and tools safely. Prepare job sites, including mobilizing, protection, cleaning, organizing, and ensuring safety compliance. Support skilled tradespeople (carpenters, painters, electricians, etc.) as needed. Operate hand and power tools safely and efficiently. Maintain a clean and organized work environment at all times. Follow directions from supervisors and project managers accurately. Qualifications: Previous construction or renovation experience. Ability to perform physically demanding work, including lifting and standing for long periods of time. Strong attention to detail, exercising care and caution in working around luxury finishes and commitment to quality. Reliable, clean, neat, organized, punctual and able to work in a fast-paced environment. Basic knowledge of construction tools and safety procedures. Ability to follow instructions and work well in a team.

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. The Cable Assembly Precision Soldering Associate is responsible for performing precision hand soldering and cable assembly by hand for complex cable and harness solutions. This position ensures all work meets the requirements of IPC-A-610, IPC-A-620, J-STD-001, and customer-specific quality standards. This position supports both prototype and production builds, contributing to the success of high-mix, low-volume wire and cable assembly organization in a highly-regulated aerospace, defense, and medical environment. Key Responsibilities * Perform precision hand soldering using various types of techniques such as solder cups, J-hooks and through-hole in order to assemble and build highly complex cables and wire harnesses. Must be able to solder without burning through the insulation or connectors. * Requires a high level of accuracy to support manual assembly and production of our cable & wire harness products. This role is required to follow IPC and engineering standards. * Inspect solder joints and assemblies for quality compliance per IPC-A-610 Class II and III criteria, IPC-A-620, and J-STD-001. * Use soldering irons, mag-lights, and ESD-safe tools safely and effectively. * Interpret engineering drawings, work instructions, and assembly documentation to ensure accuracy and following detailed instructions. * Identify and report nonconformances, process deviations, or quality issues promptly. * Maintain ESD compliance and ensure safe handling of sensitive electronic components where required. * Support process engineers and production leads in troubleshooting assembly and solder-related defects and continuous improvement activities. * Participate in 5S and Lean manufacturing initiatives to maintain an organized and efficient workspace. * Accurately complete production records, inspection logs, and traceability documentation in compliance with AS9100 and ITAR regulations. * Perform other duties as required to support a wide variety of cable and wire harness production assembly. Qualifications Education / Experience: * High school diploma or GED required; technical training or IPC certification preferred. * Minimum 1 year of precision soldering experience. * Wire, cable or harness assembly soldering in an ISO- or AS9100-certified environment preferred. * Experience in aerospace, defense, or medical device manufacturing strongly preferred. Skills / Competencies: * Proficiency in IPC-A-610, IPC-A-620, and J-STD-001 soldering standards (certification preferred) in wire harness and cable assembly. * Strong manual skills (dexterity, detail-oriented), technical understanding (reading diagrams, basic math), and attention to quality standards, focusing on precise crimping, soldering, documentation, and testing. * Excellent hand-eye coordination, color vision (for wire color coding), and ability to use small hand tools. * Ability to view color coded components as they feed into a single assembly. * Ability to hear part assembly clicking into place to ensure quality connections. * Ability to read and interpret assembly drawings, schematics, and work instructions. * Team-oriented, reliable, and quality-focused. * Must be a U.S. Person per ITAR regulations (citizen or lawful permanent resident). Physical and Work Environment Requirements * Work involves manual assembly to precision level of detail with your hands for 8-hour shifts per week. * Must be able to sit, stand, bend and work with hands for long periods. * Manual dexterity and fine motor skills required for detailed soldering work. * Capable of lifting of up to 25 pounds or heavier weight on a less frequent basis throughout the day. Benefits * Competitive hourly pay * Quarterly Manufacturing Bonuses * Medical, dental, and vision insurance * Paid time off and holidays * 401(k) retirement plan with a company matching * Training and advancement opportunities within wire harness and cable manufacturing In compliance with pay transparency requirements, the anticipated starting pay for new hires for this position is between $18-$20 per hour. Full-time employees are also eligible for performance based bonuses and benefits. This is not a guarantee of compensation or salary, as a final offer amount may vary based on factors including but not limited to experience, education, location, and shift. The specific programs and options available to an employee may vary depending on the date of hire, schedule type, and hours worked. r If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us! Creation Technologies is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you require any accommodations to complete the application process or need the job posting in an alternative format, please email Accessibility@creationtech.com. You will be connected with our Talent Acquisition team. If you are contacted regarding the position, please inform our Talent Acquisition team of any accommodations you may need during the recruiting process. All information related to accommodation requests will be handled confidentially. Canada: Title for the position will be in accordance with applicable national and local laws.

Assembly Worker Duration : 4 Months Contract Start Time : 08:00 AM End Time :05:00 PM Total Hours/week : 40.00( Mon- Fri) Qualifications: 3 years' experience assembling small products consisting of precision injection molded plastic and metal parts. Experience using bench equipment such as adhesive curing equipment, ultrasonic welders, magnifying glasses and loops to inspect results. Experience using measurement devices like pin gauges, go-nogo gauges and simple tools and fixtures. Must be able to read and follow detailed written instructions. Experience working in a medical device manufacturing environment preferred. Experience reading mechanical engineering drawings and specifications a plus. Responsibilities Reporting to an Engineer and working with a dedicated cross-functional team, the candidate will assemble, inspect and test small precision medical devices. Candidate must be able to follow written mechanical assembly procedures, detailed instructions and verbal direction. The candidate must be able to recognize specific part and product defects and follow rework procedures. The candidate must be able to learn and properly use all tools and equipment required. The candidate must follow Corporate and Divisional Quality systems and comply with all regulatory and safety guidelines. Specific responsibilities may include (but are not limited to) the following: using fixtures for assembly, testing, and inspection, and work with engineers and assemblers to complete assigned tasks.

Sims Metal (Sims) is a global leader in metal recycling. With facilities across the globe, Sims plays an intrinsic role in the circular economy by making resources available for future use. As a responsible corporate citizen, we continuously seek new ways to broaden our participation in the environmental sector, ensuring that our future is as bright, safe, and secure as at any time in our long history. Major Job Responsibilities/Duties * Operate safety equipment and use safe work habits * Operate machinery used in the production process or assist machine operators * Inspect materials and sort items or materials into piles or places in bins or barrels according to type, size, condition, coloring marking or other characteristics * Load and unload items from machines, conveyors and conveyances * Clean and lubricate equipment * Sweeps and shovels residual waste from process * Perform other duties as assigned Job Qualifications High school diploma or general education degree (GED) or related experience. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this Job, the employee is regularly required to stand and use hands to finger, handle, and feel. Reach with hands and arms; climb or balance and talk or hear. The employee is occasionally required to walk and stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Must be able to work outside under extreme temperature conditions. (Heat, cold, snow etc.) The noise level in the work environment is usually loud. A career with Sims provides you with the opportunity to work with an organization whose goal is to be the world's safest and most responsible recycling company. Our people achieve this by creating a zero-harm workplace, being exemplary members of the communities in which we operate, and being responsible stewards of the environment. We also offer competitive pay and a range of attractive benefits. Sims is proud to be an equal opportunity employer. We value the diversity of all of our employees and are committed to creating an inclusive working environment where everyone can contribute, advance on merit, and realize their full potential. Sims does not discriminate with regard to race, sex, religion, color, national origin, citizenship status, disability, age, marital or familial status, sexual orientation, gender identity, gender expression, veteran status, housing status, source of income, or any other status protected by federal, state, or local laws. This applies to any employment decision, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. qualified applicants with a disability in need of a reasonable accommodation may request such without fear of reprisal or discrimination. To achieve our purpose to create a world without waste to preserve our planet, we are guided by our Principles of Purpose: Be Safe + Well, Band Together, Be Accountable + Transparent, Consistently Innovate, Inspire with Purpose, Celebrate + Have Fun. ALREADY AN EMPLOYEE? Please apply through our Internal Career Site: Click here Why Choose A Career with Sims? Sims is a hub of innovation, offering employees the chance to explore new ideas and technologies while providing ample opportunities for personal and professional growth. With a diverse workforce, Sims fosters a sense of belonging and inclusion where employees can thrive and establish lasting connections. Working at Sims offers the chance to engage with a global network, providing opportunities for travel, cross-cultural experiences, and the ability to contribute to a sustainable future. Sims is renowned as one of the world's leading sustainable companies, empowering employees to make a difference in creating a world without waste to preserve the planet. Sims prioritizes employee wellbeing, offering superior benefits packages, meaningful training opportunities, and a supportive atmosphere where employees feel valued and heard at all levels of the organization. Sims maintains a strong focus on safety, where individuals are encouraged to challenge themselves, contribute, and support one another, in a collaborative team environment.

Assists manager by ensuring inventory properly recorded and rotated into stock. Processes fresh fish for customer orders. Selects products from pick ticket and stages orders. Replenish stock as needed. What you'll do: Ensure all incoming seafood is properly rotated into stock Ensure that production maintains a steady flow in order to meet production requirements Reads production schedule or customer order to determine items to be processed, moved, gathered, or distributed. Conveys materials and items from stocked locations to production areas or storage or to other designated areas using electric pallet jack. Lift seafood onto table- Lifting 15-20#s consistently, frequently up to 50# and occasionally up to 100# with assistance. Uses electric scaling machine to scale fish- involves standing for long periods. Sorts and places items on racks, shelves, or in bins according to predetermined sequence such as size, type, style, color, or product code. Work in refrigerated rooms 30-36 degrees. Fills requisitions, work orders, or requests for stock items and distributes items. Assembles customer orders from stock and places orders on pallets or shelves, or conveys orders to packing station or shipping department to prepare for shipping. Marks or labels items with identifying information. Opens boxes, crates, and other containers. Records amounts of items distributed. Weighs or counts items for distribution within plant to ensure conformance to company standards Compiles worksheets or tickets from customer specifications. Maintain cleanliness of work area including warehouse. About you: High school diploma or general education degree (GED) Two to three years related experience and/or training; or equivalent combination of education and experience.

Aid in the production process and mould different fixtures. Utilize various hand and power instruments to complete tasks (measuring tape, hammer, etc.) Analyze completed products and inspect them for quality. Put together old units and, if necessary, carry out modifications and repairs. Produce precise drawings of product designs Reading and understanding product schematics and assembly instructions. Verifying dimensions and product specifications. Ensuring that all parts are properly fitted, aligned and screwed in. Reporting and detailing product malfunctions. Adhering to assembly safety standards.

Job DescriptionDescription: The assembly operator oversees and operates machines necessary to swage cable, to perform cable end treatments, to swage fittings, to cut or trim cable, to grind assemblies to length and to assemble cable components. Counts packages and labels completed cable assemblies. This position is responsible to maintain acceptable production outputs and quality of wire/cable assembly. Duties and Responsibilities: Takes and follows directions from both, operational performance and job requirements from Supervisors, Facilitators on a job by job basis. Clear area of previous job materials. Completes job cards, routers and job documentation as required. Operates lathes, welders, presses, grinders, cable cutters, swagers, packaging equipment and other equipment necessary to manufacture cable assemblies. Maintains material traceability by completing records of materials usage for each job. Monitors and performs visual and tactile inspection of assembled parts. Performs proof-loading of assembled parts. Gathers samples for start-up and in-process testing and inspection. Packages and labels processed material according to job card instructions. Reports part or process quality issues to their supervisor or any quality personnel. Any other duties as assigned by supervisor. Requirements: Prior experience is preferred but not required. Demonstrates ability to self-motivate and to problem solve in a fast-paced setting. Excellent organizational skills and attention to detail. Must have good documentation practice. A proven understanding of part workmanship. Ability to analyze data and make recommendations. Ability to troubleshoot manufacturing defects. Strong interpersonal skills. Ability to seek and accept feedback from others. Ability to speak, read, and write in English preferred but not required. Education and Experience: High school diploma or equivalent. Working conditions: While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles. The noise level in the work environment is occasionally high requiring safety equipment to be utilized. Physical requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g. standing, sitting, walking throughout the facility and stairs. Ability to lift items weighing up to 50 lbs. Pay: $18.00-$18.00/hour Benefits: Eligible after 1st day: Paid holidays Employee Assistance Program Eligible after 90-day probation period: Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account Vacation time Sick time Eligible after 1 year of service: 401(k) with Employer Match Potential for discretionary bonus The final pay offered to a successful candidate wil l be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We're proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don't discriminate based on an individual's race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), a typical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at **********************.

Our client, a world leader in the semiconductor industry, is looking for an "Electronic / Electro-Mechanical Assembler" based out of Totowa, NJ. Job Duration: Long-Term Contract (Possibility Of Extension) Pay Rate: $30-$36/hr on W2 Company Benefits: Medical, Dental, Vision, Paid Sick leave, 401K Working Hours: 7am -3:30pm, but there is expected 10-15 hours of overtime required. During the week until 5:30pm. And weekend 7am -3:30pm. Responsibilities: • Performs a wide variety of electronic or electro-mechanical assembly operations on assemblies or sub-assemblies. • Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units. • Makes setups and adjustments holding tolerances to blueprint specifications. • Typically requires a minimum of 4 - 6 years of related experience. Interested! Please apply or send your resume to ********************** / ************************.

TE Wire & Cable LLC As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. The Cable Harness Assembler position is responsible for assembling, testing, and installing harnesses, and related components in an aerospace manufacturing environment. This role requires precision, attention to detail, adherence to engineering specifications and safety standards. Key Responsibilities: * Assemble and install electrical components, wiring, and harnesses according to engineering drawings, and specifications. * Using manual & powered tools to perform delicate tasks such as stripping, crimping, soldering, and connector assembly. * Conduct testing such as electrical continuity and HI POT testing on cable harness assemblies to ensure quality and compliance to requirements. * Read and interpret engineering documentation, including drawings, and wiring diagrams. * Inspect, verify, and document each step of the assembly process of components and finished products. To ensure quality standards are in accordance with engineering specifications. * Help improve manufacturing process by communicating problems or concerns. * Confirm all appropriate materials needed to complete a job, according to the Bill of Materials, are with the work order (i.e.: wire, hardware, and miscellaneous components) as well as printing out labels for each work order. * Utilize Lean & Continuous Improvement techniques to drive quality & productivity. * Other duties as assigned. Requirements: * Education: High school diploma or equivalent. Technical certification in electrical assembly or related field preferred. * 2 Years Experience with wire harness assembly, and able to read wire harness installation drawings/wiring diagrams/work instructions. * Experience with IPC/WHMA-A-620, IPC J-STD-001 desired. Our Competitive Benefits Include: Medical (3 Plan Options), Dental, Vision, Health Savings Account, Flexible Spending Accounts, 401K & Roth 401K (with generous Company Match), Paid Basic Life & AD&D insurance, Employee Assistance Program, Paid Parental Leave, Paid Holidays and Vacation. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.