Maintenance Technician jobs at LMI Aerospace - 77 jobs

This position will report to the Service Manager. The responsibilities of the Service Technician are to service, maintain, troubleshoot, and repair heating, ventilation, air conditioning, refrigeration systems and equipment. Diagnosing malfunctions and determining repair needs, inspecting, and performing tests on systems and equipment for defective parts and to assure proper functioning. Essential Job Function Customer Service Always present a professional positive and helpful attitude when interacting with customers and co-workers. Exhibit an understanding of Human Relations and functions as a “team player”. This position has frequent contact with customers, requiring reasonable tact and strong verbal/written communication skills. Observe additional maintenance needs requiring attention and report to the appropriate people. Basic Functions/Requirements Read and write English. Write legibly. Read a tape measure, perform basic math skills: (Add, Subtract, Fractions, Calculate sales tax) Must have valid Michigan drivers' licenses, good driving record (our insurance must accept you) Paperwork filled out properly daily, including electronic documentation, if applicable. Follow verbal and written instructions. Follow all safety rules. Be able to wear all P.P.E's when applicable (steel toe boots, gloves, safety glasses, hard hat, etc.) Lift, climb, bend, and kneel to complete assigned tasks. Tolerate working at heights off a ladder, scaffold, and aerial lifts. Perform heavy physical labor during adverse weather conditions. Work in confined spaces, exposed to fumes, chemicals, grease, acids, oil and in the vicinity of noise and vibration with proper P.P.E's. Maintain cooperative and effective working relationship with others. Be able to take “on call” in the regular rotation. Be available to work any time of the day to take care of your customer. (Before 8:00 am and after 5:00 pm during the week, any time weekends, and holidays) 4 hours safety training required annually. Must have refrigerant transition and recovery certification card. Continuing education is expected. Education/Experience High school diploma or GED preferred. 10+ Years' experience preferred. Work Coordination and Paperwork Coordinate start and stop time with Service Dispatcher for each call. Organize all work detail (work performed, service recommendations, etc.) and complete an accurate work ticket, paper or electronic, for billing and payroll purposes. Submit all paperwork to the office each Monday before 10:00 AM or at end of each month is required. Obtain record on work ticket and communicate to vendor an appropriate purchase order number when purchasing job-related parts and supplies. Physical Requirements Climbing (ladders, stairs, etc.) while carrying tools and parts Lift 50 lbs. frequently, 100 lbs. occasionally, and 100+ lbs. with assistance Bending or stooping Extended periods of walking Regular exposure to weather conditions Operating a motor vehicle Owning and operating power or hand tools Exposure to potentially harmful chemicals or materials with proper P.P.D's Non-Essential duties and responsibilities Performs other duties as assigned by Management.

We are seeking a skilled and versatile Maintenance Technician 1 to join our client's team in Troy, MI. In this role, you will perform preventive maintenance, troubleshoot equipment, and support facility operations to ensure optimal performance and safety. This position requires strong mechanical aptitude, fabrication skills, and the ability to work independently with minimal supervision. RESPONSIBILITIES AND ESSENTIAL DUTIES: Perform duties safely using approved safety equipment and procedures. Troubleshoot Trystar equipment with minimal supervision; contact manufacturers for technical support as needed. Perform preventive maintenance (PMs) regularly and as required. Update maintenance management software by entering assets, work orders, and generating PM/work order status reports. Apply general fabrication skills, including welding (MIG & TIG), plasma cutting, torch cutting, and band saw cutting. Read facility blueprints for equipment and production line layout. Apply mechanical knowledge and basic electrical meter skills for troubleshooting. Disassemble and diagnose mechanical failures; perform necessary repairs. Assist with machinery installations and maintain most equipment independently. Apply plumbing skills for facility maintenance (e.g., sinks, drain lines, toilets). Apply HVAC skills for equipment and facility maintenance (e.g., heaters, furnaces, AC systems, exhaust fans). Assist outside contractors with machinery repairs and installations. Maintain knowledge of pneumatics (repair airlines, fittings, valves, cylinders) and hydraulics (replace hoses, pumps, valves). Maintain a clean and organized work area throughout the day. Safely operate forklifts and scissor lifts. Inventory and control stock of maintenance supplies. Participate in continuous improvement efforts by identifying and supporting process improvements. MINIMUM REQUIREMENTS: Basic Qualifications High school diploma or equivalent (GED). Two years of technical training in industrial maintenance or building repair OR four years of experience as an Industrial Maintenance associate. Ability to read, write, and understand work instructions in English. Familiarity with operating power tools. Ability to safely perform job responsibilities. Flexibility in work hours and participation in on-call rotation. Positive attitude and adherence to company policies.

Duration: 12 Months Qualifications: Mechanical, pneumatic and electrical skills, must analyze, troubleshoot and repair complex equipment and machinery. Ability to read and interpret technical manuals, schematics, diagrams and equipment specifications. Flexible and adaptable in working with/on a variety of equipment, processes, projects or assignments. Effectively works in a team setting, supporting team goals and objectives. Makes effective decisions relative to position requirements. Understanding and use of trades mathematics, calibration techniques, and precision measuring instruments essential. Constant attention performing moderately complex work requiring close limits of accuracy and tolerances. Lifting, pushing, pulling, moving of equipment and machinery up to 60 lbs. frequently. May work in awkward and difficult positions. Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment. Minimum of 3 years related experience preferred. Working knowledge of other maintenance trades/crafts. Responsibilities: Uses judgment to plan, perform, make decisions, troubleshoot and problem solve in performance of all maintenance tasks and prioritize workflow. Responsible for preventive maintenance activities. Works independently with minimal supervision and prioritizes own work schedule. Works with external contractors and vendors. Working knowledge of other maintenance trades/crafts. Ability to perform all functions of job within 12 months. Familiarity with Personal Computers and basic use of a Windows environment preferred. Position requires midnight and afternoon shifts including weekend coverage. Education : High School Diploma/GED (Required) Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment (Required) Additional Information All your information will be kept confidential according to EEO guidelines.

Duration: 12 Months Qualifications: Mechanical, pneumatic and electrical skills, must analyze, troubleshoot and repair complex equipment and machinery. Ability to read and interpret technical manuals, schematics, diagrams and equipment specifications. Flexible and adaptable in working with/on a variety of equipment, processes, projects or assignments. Effectively works in a team setting, supporting team goals and objectives. Makes effective decisions relative to position requirements. Understanding and use of trades mathematics, calibration techniques, and precision measuring instruments essential. Constant attention performing moderately complex work requiring close limits of accuracy and tolerances. Lifting, pushing, pulling, moving of equipment and machinery up to 60 lbs. frequently. May work in awkward and difficult positions. Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment. Minimum of 3 years related experience preferred. Working knowledge of other maintenance trades/crafts. Responsibilities: Uses judgment to plan, perform, make decisions, troubleshoot and problem solve in performance of all maintenance tasks and prioritize workflow. Responsible for preventive maintenance activities. Works independently with minimal supervision and prioritizes own work schedule. Works with external contractors and vendors. Working knowledge of other maintenance trades/crafts. Ability to perform all functions of job within 12 months. Familiarity with Personal Computers and basic use of a Windows environment preferred. Position requires midnight and afternoon shifts including weekend coverage. Education: High School Diploma/GED (Required) Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment (Required) Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionDescription: IS OPEN FOR 3rd SHIFT CURRENTLY - 11:30 pm - 7:30 am *** The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site's business goals and objectives. Functions Responsible for diagnosing and repairing miscellaneous manufacturing equipment with limited support needed Rolling toolbox & knowledge of tool room equipment Read and interpret equipment manuals and work orders to perform required maintenance and service Disassemble machinery and equipment to remove parts and make repairs Examines parts for defects, such as breakage or excessive wear Repairs, replaces, adjust, and align components of machinery and equipment Runs repaired machinery and equipment to verify adequacy of repairs Maintains accurate records of maintenance work performed and inventory Able to lead problem solving and troubleshooting efforts associated with mid to high-level process issues Perform regular preventative maintenance on machines and equipment Competencies Accountability Adaptability Analytical thinking Attention to detail Communication Creativity Decision making Focus on quality Initiative Integrity Planning and organizing Problem solving Results-oriented Safety-conscious Teamwork and collaboration Technical expertise Time management Writing skills · Understand and implement Drake Driven Core Values into everyday work habits. Requirements: High School Diploma/GED Maintenance Technician Certification is a plus Previous work experience as a Machinist is a plus Must have own tools and toolbox to be left at the shop Ability to read blueprints, schematics and manuals Hands on experience with different manual, semi-automated or automated tools and machines (lathes, grinders etc.) Proficient with Outlook - Plex is a plus Experience of electrical & hydraulic knowledge Experience with diagnosing and repairing issues with CNC's lathes + Mills Experience with APC repair Knowledge and understanding of CNC controls Experience with Fanuc Robots is a plus Ability to work Independently or with others Prior experience with P.M.'s The Benefits of Working With Us! Employer Paid Benefits Short Term Disability Long Term Disability Basic Life Insurance and Accidental Death & Dismemberment Optional/Voluntary Benefits 401(k) with Employer Match Medical & Prescription Dental Vision Flexible Spending Account Voluntary Life and Accidental Death & Dismemberment Critical Illness Accident Legal Plan 7 Paid Holidays 1 Floating Holiday Paid Sick/Personal Leave Paid Time Off (PTO) Drake Wear - our own line of branded merchandise

Job DescriptionDescription: is for 3rd shift - 11:00 pm - 7:30 am** The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site's business goals and objectives. Functions Responsible for diagnosing and repairing miscellaneous manufacturing equipment with little or no support needed Rolling toolbox & knowledge of tool room equipment Read and interpret equipment manuals and work orders to perform required maintenance and service Disassemble machinery and equipment to remove parts and make repairs Examines parts for defects, such as breakage or excessive wear Repairs, replaces, adjust, and align components of machinery and equipment Runs repaired machinery and equipment to verify adequacy of repairs Maintains accurate records of maintenance work performed and inventory Able to lead problem solving and troubleshooting efforts associated with high-level process issues Provides guidance to employees in the Maintenance Department Competencies Accountability Adaptability Analytical thinking Attention to detail Communication Creativity Decision making Focus on quality Initiative Integrity Planning and organizing Problem solving Results-oriented Safety-conscious Teamwork and collaboration Technical expertise Time management Writing skills · Understand and implement Drake Driven Core Values into everyday work habits. Requirements: High School Diploma/GED Maintenance Technician Certification is a plus Previous work experience as a Machinist is a plus Must have own tools and toolbox to be left at the shop Ability to read blueprints, schematics and manuals Ability to weld tig/mig Hands on experience with different manual, semi-automated or automated tools and machines (lathes, grinders etc.) Proficient with Outlook - Plex is a plus Extensive experience of electrical & hydraulic knowledge Extensive experience with diagnosing and repairing issues with CNC's lathes + Mills Extensive experience with APC repair Extensive knowledge and understanding of CNC controls Experience with Fanuc Robots is a plus Ability to work Independently or with others The Benefits of Working With Us! Employer Paid Benefits Short Term Disability Long Term Disability Basic Life Insurance and Accidental Death & Dismemberment Optional/Voluntary Benefits 401(k) with Employer Match Medical & Prescription Dental Vision Flexible Spending Account Voluntary Life and Accidental Death & Dismemberment Critical Illness Accident Legal Plan 7 Paid Holidays 1 Floating Holiday Paid Sick/Personal Leave Paid Time Off (PTO) Drake Wear - our own line of branded merchandise

Full-time Description is for 3rd shift - 11:00 pm - 7:30 am** The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site's business goals and objectives. Functions Responsible for diagnosing and repairing miscellaneous manufacturing equipment with little or no support needed Rolling toolbox & knowledge of tool room equipment Read and interpret equipment manuals and work orders to perform required maintenance and service Disassemble machinery and equipment to remove parts and make repairs Examines parts for defects, such as breakage or excessive wear Repairs, replaces, adjust, and align components of machinery and equipment Runs repaired machinery and equipment to verify adequacy of repairs Maintains accurate records of maintenance work performed and inventory Able to lead problem solving and troubleshooting efforts associated with high-level process issues Provides guidance to employees in the Maintenance Department Competencies Accountability Adaptability Analytical thinking Attention to detail Communication Creativity Decision making Focus on quality Initiative Integrity Planning and organizing Problem solving Results-oriented Safety-conscious Teamwork and collaboration Technical expertise Time management Writing skills · Understand and implement Drake Driven Core Values into everyday work habits. Requirements High School Diploma/GED Maintenance Technician Certification is a plus Previous work experience as a Machinist is a plus Must have own tools and toolbox to be left at the shop Ability to read blueprints, schematics and manuals Ability to weld tig/mig Hands on experience with different manual, semi-automated or automated tools and machines (lathes, grinders etc.) Proficient with Outlook - Plex is a plus Extensive experience of electrical & hydraulic knowledge Extensive experience with diagnosing and repairing issues with CNC's lathes + Mills Extensive experience with APC repair Extensive knowledge and understanding of CNC controls Experience with Fanuc Robots is a plus Ability to work Independently or with others The Benefits of Working With Us! Employer Paid Benefits Short Term Disability Long Term Disability Basic Life Insurance and Accidental Death & Dismemberment Optional/Voluntary Benefits 401(k) with Employer Match Medical & Prescription Dental Vision Flexible Spending Account Voluntary Life and Accidental Death & Dismemberment Critical Illness Accident Legal Plan 7 Paid Holidays 1 Floating Holiday Paid Sick/Personal Leave Paid Time Off (PTO) Drake Wear - our own line of branded merchandise

IS OPEN FOR 3rd SHIFT CURRENTLY - 11:30 pm - 7:30 am *** The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site's business goals and objectives. Functions Responsible for diagnosing and repairing miscellaneous manufacturing equipment with limited support needed Rolling toolbox & knowledge of tool room equipment Read and interpret equipment manuals and work orders to perform required maintenance and service Disassemble machinery and equipment to remove parts and make repairs Examines parts for defects, such as breakage or excessive wear Repairs, replaces, adjust, and align components of machinery and equipment Runs repaired machinery and equipment to verify adequacy of repairs Maintains accurate records of maintenance work performed and inventory Able to lead problem solving and troubleshooting efforts associated with mid to high-level process issues Perform regular preventative maintenance on machines and equipment Competencies Accountability Adaptability Analytical thinking Attention to detail Communication Creativity Decision making Focus on quality Initiative Integrity Planning and organizing Problem solving Results-oriented Safety-conscious Teamwork and collaboration Technical expertise Time management Writing skills · Understand and implement Drake Driven Core Values into everyday work habits. Requirements High School Diploma/GED Maintenance Technician Certification is a plus Previous work experience as a Machinist is a plus Must have own tools and toolbox to be left at the shop Ability to read blueprints, schematics and manuals Hands on experience with different manual, semi-automated or automated tools and machines (lathes, grinders etc.) Proficient with Outlook - Plex is a plus Experience of electrical & hydraulic knowledge Experience with diagnosing and repairing issues with CNC's lathes + Mills Experience with APC repair Knowledge and understanding of CNC controls Experience with Fanuc Robots is a plus Ability to work Independently or with others Prior experience with P.M.'s The Benefits of Working With Us! Employer Paid Benefits Short Term Disability Long Term Disability Basic Life Insurance and Accidental Death & Dismemberment Optional/Voluntary Benefits 401(k) with Employer Match Medical & Prescription Dental Vision Flexible Spending Account Voluntary Life and Accidental Death & Dismemberment Critical Illness Accident Legal Plan 7 Paid Holidays 1 Floating Holiday Paid Sick/Personal Leave Paid Time Off (PTO) Drake Wear - our own line of branded merchandise

BCforward began as an IT business solutions and staffing firm. Founded in 1998, BCforward has grown with our customers' needs into a full service personnel solutions organization. BCforward's headquarters are in Indianapolis, Indiana and also operates delivery centers in 20 locations in North America as well as India and Puerto Rico. We are currently the largest consulting firm and largest MBE certified firm headquartered in Indiana. Job Description Maintenance Engineer 9/19/2016 - 9/19/2017 Detroit, MI $32/hr Qualifications: Mechanical, pneumatic and electrical skills, must analyze, troubleshoot and repair complex equipment and machinery. Ability to read and interpret technical manuals, schematics, diagrams and equipment specifications. Flexible and adaptable in working with/on a variety of equipment, processes, projects or assignments. Effectively works in a team setting, supporting team goals and objectives. Makes effective decisions relative to position requirements. Understanding and use of trades mathematics, calibration techniques, and precision measuring instruments essential. Constant attention performing moderately complex work requiring close limits of accuracy and tolerances. Lifting, pushing, pulling, moving of equipment and machinery up to 60 lbs. frequently. May work in awkward and difficult positions. Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment. Minimum of 3 years related experience preferred. Working knowledge of other maintenance trades/crafts. Responsibilities: Uses judgment to plan, perform, make decisions, troubleshoot and problem solve in performance of all maintenance tasks and prioritize workflow. Responsible for preventive maintenance activities. Works independently with minimal supervision and prioritizes own work schedule. Works with external contractors and vendors. Working knowledge of other maintenance trades/crafts. Ability to perform all functions of job within 12 months. Familiarity with Personal Computers and basic use of a Windows environment preferred. Position requires midnight and afternoon shifts including weekend coverage. Comments/Special Instructions Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment. Minimum of 3 years related experience preferred. Working knowledge of other maintenance trades/crafts. Sandra Taylor ************ Additional Information Sandra Taylor ************

BCforward began as an IT business solutions and staffing firm. Founded in 1998, BCforward has grown with our customers' needs into a full service personnel solutions organization. BCforward's headquarters are in Indianapolis, Indiana and also operates delivery centers in 20 locations in North America as well as India and Puerto Rico. We are currently the largest consulting firm and largest MBE certified firm headquartered in Indiana. Job Description Maintenance Engineer 9/19/2016 - 9/19/2017 Detroit, MI $32/hr Qualifications: Mechanical, pneumatic and electrical skills, must analyze, troubleshoot and repair complex equipment and machinery. Ability to read and interpret technical manuals, schematics, diagrams and equipment specifications. Flexible and adaptable in working with/on a variety of equipment, processes, projects or assignments. Effectively works in a team setting, supporting team goals and objectives. Makes effective decisions relative to position requirements. Understanding and use of trades mathematics, calibration techniques, and precision measuring instruments essential. Constant attention performing moderately complex work requiring close limits of accuracy and tolerances. Lifting, pushing, pulling, moving of equipment and machinery up to 60 lbs. frequently. May work in awkward and difficult positions. Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment. Minimum of 3 years related experience preferred. Working knowledge of other maintenance trades/crafts. Responsibilities: Uses judgment to plan, perform, make decisions, troubleshoot and problem solve in performance of all maintenance tasks and prioritize workflow. Responsible for preventive maintenance activities. Works independently with minimal supervision and prioritizes own work schedule. Works with external contractors and vendors. Working knowledge of other maintenance trades/crafts. Ability to perform all functions of job within 12 months. Familiarity with Personal Computers and basic use of a Windows environment preferred. Position requires midnight and afternoon shifts including weekend coverage. Comments/Special Instructions Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment. Minimum of 3 years related experience preferred. Working knowledge of other maintenance trades/crafts. Sandra Taylor ************ Additional Information Sandra Taylor ************

Intex is seeking a reliable Maintenance Technician for 2nd shift. Hours are 4 pm to 2 am, Monday to Thursday. Fridays are Preventive Maintenance days starting at 2pm. ESSENTIAL DUTIES & RESPONSIBILITIES include the following. Other duties may be assigned. • Troubleshooting and repair of machines and equipment during production as well as during planned/unplanned downtime. • Advise manufacturing of suggestions that would optimize production and minimize downtime and scrap. • Preventative maintenance of machines and equipment. • Maintain records documenting preventative maintenance, downtime, and required validation checks. • Ensure preventative maintenance procedures are completed on time and on the necessary frequency per stated expectations. • Monitor inventory and report discrepancies to keep from running out of necessary spare parts. • Suggest changes in procedure and use of equipment to increase efficiency. • Recognize safety hazards on equipment and in the plant and initiate corrective action. • Communicate with management on any known issues. • Minimize downtime and keep production running efficiently. • Train other team members to increase their skill level as needed. • Comply with all federal and state safety standards. • Comply with all housekeeping standards. Requirements SUPERVISORY ROLE This job has no supervisory responsibilities. PREFERRED SKILLS High level of mechanical ability involving the rebuild of complex pumps, valves, injectors, etc. High level of ability in hydraulic and pneumatic troubleshooting and repair. Basic to Intermediate ability in industrial robotics (ABB, Fanuc) Comply with all federal and state safety standards. Experience troubleshooting PLC related issues. Candidates should possess a high level of professionalism, a bright attitude, and a clear ability to effectively communicate between all level of an organization EDUCATION/EXPERIENCE High school diploma or equivalent required. Associate degree, technical program, advanced training or 3+ years equivalent experience. PHYSICAL DEMANDS & WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle or feel, reach with hands and arms, and stoop, kneel, crouch, or crawl. The employee is frequently required to stand; walk; and sit. The employee will need to bend, twist and exert pressure on their wrist and hands. The employee must occasionally lift and/or move up to 50 pounds. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to heat and risk of electrical shock. The employee is occasionally exposed to fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate. SAFETY REQUIREMENTS This position requires steel-toed boots. BENEFITS: Health Insurance Dental Insurance Vision Insurance Short-Term Disability Insurance Life Insurance 401K Enrollment Paid Holidays Paid Time Off Referral Bonuses Intex technologies is a dedicated equal opportunity employer and prohibits discrimination and harassment of any kind. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity and/or expression, national origin, protected veteran status, disability, genetics, or citizenship status (when otherwise legally authorized to work) and will not be discriminated against on the basis of such characteristics or any other status protected by the laws or regulations in the locations where we operate. Intex technologies encourages applicants of all ages. PM18 Salary Description $26 - $30 per hour

Job Description Apartment Maintenance Technician** Canton, Michigan Full-Time **About Us:** Join our dynamic team, a leader in property management, dedicated to creating and maintaining communities that our residents are proud to call home. We are seeking a skilled and dependable Apartment Maintenance Technician to ensure our properties are safe, functional, and inviting for all residents. **Job Responsibilities:** - **Property Maintenance:** Conduct routine inspections and maintenance of residential apartments, addressing issues related to plumbing, electrical systems, HVAC units, carpentry, and general building repairs. - **Preventative Maintenance:** Implement and monitor preventive maintenance programs to ensure buildings and facilities are proactively cared for, identifying potential issues before they occur. - **Emergency Repairs:** Respond promptly to emergency maintenance requests, ensuring residents' safety and comfort at all times. - **Team Collaboration:** Work closely with the property management team and other maintenance staff to maintain the quality and appearance of the community. - **Compliance:** Ensure that all repairs and maintenance work comply with building codes, health, and safety regulations. - **Documentation:** Maintain accurate records of maintenance requests and actions taken, ensuring all tasks are completed efficiently and reported correctly. **Qualifications:** - Proven experience as a Maintenance Technician or in a similar role. - Strong knowledge of HVAC, plumbing, electrical, and general repair skills. - Excellent problem-solving abilities and attention to detail. - Ability to work independently and as part of a team. - Strong time-management skills and the ability to prioritize tasks. - High school diploma or equivalent; technical certifications are a plus. **Benefits:** - Competitive salary and performance bonuses. - Health, dental, and vision insurance. - 401(k) retirement plan with company match. - Paid time off and holidays. - Opportunities for professional development and career advancement. - Employee discounts on housing and other benefits.

Maintenance / Machine repair helper, mainly first shift (6:30 am to 3:00 pm) but must be able to work any shift . The company is seeking a full time industrial maintenance person to perform general maintenance and repair on the facility and machinery. Responsibilities: include performing and tracking preventative maintenance on machinery and the facility, Perform lubrication and oil changes on various equipment. Perform with troubleshooting, dis-assembly / re-assembly, and repairing equipment. Assist with maintaining inventory of stock parts and other supplies, Position will include motors, electrical, plumbing, and general facility maintenance. Must be able to work any shift, overtime, and weekends and responsible for following all safety rules, and maintaining good housekeeping. BASIC REQUIREMENTS:- 1. Must have knowledge and be capable of using hand tools. 2. Must be capable of carrying heavy loads for long distances. 3. Must be physically capable of climbing and working from ladders with heights up to 25' 4. Good communication skills, attendance, team player. 5. Must be able to read and understand job instructions, repair manuals, safety rules etc. 6. Some motor experience and electrical very helpful. Requirements Experience with production machines (machine repair, hi lo repair and PM duties) Experience with blasting maintenance Experience with repair welding and electrical work Mechanical aptitude Information Our equipment is proprietary, so some training will be required which will be provided. This individual should be able to work flexible hours. Hours available will be 40+ per week. ------------------------------------------------------------------------------------------------------------------ Please submit resume outlining hands-on experience.

Intex is seeking a reliable Maintenance Technician for 1st shift. Hours are 6 am to 4 pm, Monday to Thursday. Fridays are Preventive Maintenance days starting at 6am. ESSENTIAL DUTIES & RESPONSIBILITIES include the following. Other duties may be assigned. • Troubleshooting and repair of machines and equipment during production as well as during planned/unplanned downtime. • Advise manufacturing of suggestions that would optimize production and minimize downtime and scrap. • Preventative maintenance of machines and equipment. • Maintain records documenting preventative maintenance, downtime, and required validation checks. • Ensure preventative maintenance procedures are completed on time and on the necessary frequency per stated expectations. • Monitor inventory and report discrepancies to keep from running out of necessary spare parts. • Suggest changes in procedure and use of equipment to increase efficiency. • Recognize safety hazards on equipment and in the plant and initiate corrective action. • Communicate with management on any known issues. • Minimize downtime and keep production running efficiently. • Train other team members to increase their skill level as needed. • Comply with all federal and state safety standards. • Comply with all housekeeping standards. Requirements SUPERVISORY ROLE This job has no supervisory responsibilities. PREFERRED SKILLS High level of mechanical ability involving the rebuild of complex pumps, valves, injectors, etc. High level of ability in hydraulic and pneumatic troubleshooting and repair. Basic to Intermediate ability in industrial robotics (ABB, Fanuc) Comply with all federal and state safety standards. Experience troubleshooting PLC related issues. Candidates should possess a high level of professionalism, a bright attitude, and a clear ability to effectively communicate between all level of an organization EDUCATION/EXPERIENCE High school diploma or equivalent required. Associate degree, technical program, advanced training or 3+ years equivalent experience. PHYSICAL DEMANDS & WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle or feel, reach with hands and arms, and stoop, kneel, crouch, or crawl. The employee is frequently required to stand; walk; and sit. The employee will need to bend, twist and exert pressure on their wrist and hands. The employee must occasionally lift and/or move up to 50 pounds. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to heat and risk of electrical shock. The employee is occasionally exposed to fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate. SAFETY REQUIREMENTS This position requires steel-toed boots. BENEFITS: Health Insurance Dental Insurance Vision Insurance Short-Term Disability Insurance Life Insurance 401K Enrollment Paid Holidays Paid Time Off Referral Bonuses Intex technologies is a dedicated equal opportunity employer and prohibits discrimination and harassment of any kind. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity and/or expression, national origin, protected veteran status, disability, genetics, or citizenship status (when otherwise legally authorized to work) and will not be discriminated against on the basis of such characteristics or any other status protected by the laws or regulations in the locations where we operate. Intex technologies encourages applicants of all ages. PM18

Office Location: 601 First Street NW, Grand Rapids, MI 49504 (travel limited to downtown Grand Rapids, MI) Position Classification: Full-Time Regular About This Opportunity As the Maintenance Technician, you will undertake the responsibility to preserve the good condition and functionality of Rockford's commercial and residential properties. A Technician is a thorough professional with a practical mind and attention to detail. The ideal candidate will be able to work autonomously and responsibly by observing all health and safety guidelines at all times and successfully complete tasks in a timely and efficient manner. The goal is to maintain the buildings and common areas in the best possible condition. This position reports directly to the Maintenance Manager. If you have facility maintenance experience, effective communication skills and an eye for detail, apply today and become a part of our dynamic team! Requirements A minimum of 2+ years working in a facility maintenance role or similar. Residential and commercial property management experience preferred. A minimum of a high school diploma. A valid driver's license and reliable transportation. Travel limited to downtown Grand Rapids, Michigan. The ability to participate in a rotating on-call schedule. Experience in the general inspections of properties/buildings and maintaining inspection logs for fire inspection systems, cooling tower treatments, generator inspections, and maintaining logs in compliance with all federal, state and city regulations. Grounds clean up, such as trash removal, snow removal and dispersing salt on sidewalks. Familiarity with commonly used concepts, practices and procedures within the facility maintenance field. Excellent communication and interpersonal skills to coordinate and supervise vendors (plumbers, electricians, etc.) Exceptional organizational and problem-solving skills and management of multiple tasks at once. Intermediate knowledge of Microsoft Office Suite (Word, Excel, and Outlook) 365. Bonus Skills and Experience: Web-based work order and/or Yardi experience. Certifications such as HVAC, Building Maintenance Technology, First AId and CPR. Benefits At Rockford, we believe that investing in our people is essential to our success. We offer a competitive compensation package along with a 401(k) plan featuring a company match to help you plan for the future. Our team members have access to comprehensive healthcare coverage, generous paid time off, and flexible work schedules that support work-life balance. We encourage continued growth through tuition reimbursement and professional development opportunities, and we promote well-being through on-site health and wellness programs. Rockford also provides industry-leading technology to empower our teams and offers meaningful ways to give back through volunteer time off and partnerships with local organizations. Joining Rockford means more than just a job. It's an opportunity to shape your career while helping to build stronger communities. Who We Are For nearly 40 years, Rockford has been a trusted partner to thousands of clients across the U.S. With construction management, real estate development and property management services all under one roof, we view space from every angle. We think like owners, build with precision and operate to achieve long-term value-always committed to craftsmanship, quality and service. Our talented team brings expertise and innovation to commercial, educational, industrial, health + well-being, hospitality, multi-unit and retail markets. From complex, large-scale construction, to smaller renovations, we tailor our services and approach to meet the unique needs of our clients and the communities they serve. Recognized by Engineering News-Record as one of the Top 200 Contractors in the nation and consistently honored as one of the 101 Best and Brightest Companies to Work For, Rockford delivers more than buildings. We deliver results that last. We're deeply invested in our people, our communities and the continued success of every project we touch-driven by a clear purpose: to Build a Better World. Environmental Factors and Working Conditions The work environment for this position is a mix of a typical office environment, and visits to properties. Visits to properties may involve travel. The physical demands may require frequent lifting of 50 lbs, bending, stooping, kneeling, and climbing. The individual may also be subject to hazards commonly associated with construction including high temperatures, humidity, cold temperatures, and climbing stairs and ladders. Other examples of physical hazards include noise, proximity to moving vehicles, atmospheric conditions, close quarters, uneven surfaces, and elevated surfaces. The individual may also be subject to outside environmental conditions (weather) where protection may not be available. Use of mobile equipment and power tools will be frequent. Personal Protective Equipment (PPE) including proper footwear, hard hat, safety glasses, hearing protection, high visibility vest and/or other special clothing shall be worn when required. Rockford is an equal opportunity employer that supports and subscribes to a policy of nondiscrimination in all aspects of employment. Rockford will not discriminate based on religion, race, color, national origin, age, sex (including pregnancy and related conditions, gender identity, and sexual orientation), height, weight, marital status, military service, partisan consideration, disability, genetic information, or any other reason prohibited by applicable federal and state laws.

Job Description We are seeking a dedicated and skilled Maintenance Person to join our team. The ideal candidate will be responsible for performing a variety of maintenance tasks to ensure the smooth operation of our facilities. This role requires a proactive approach to problem-solving and a commitment to maintaining a safe and efficient environment. Duties Conduct routine inspections of buildings and equipment to identify maintenance needs. Perform repairs on plumbing, electrical, and HVAC systems as required. Maintain and repair machinery, tools, and equipment to ensure optimal performance. Respond promptly to maintenance requests from staff and management. Ensure that all maintenance work is completed in compliance with safety regulations and standards. Keep accurate records of maintenance activities and repairs performed. Assist in the setup and breakdown of facilities for events or special projects. Collaborate with other team members to improve maintenance processes and procedures. Requirements Proven experience in maintenance or a related field is preferred. Strong knowledge of plumbing, electrical systems, HVAC, and general repair techniques. Ability to troubleshoot issues effectively and efficiently. Excellent communication skills and the ability to work well in a team environment. Physical stamina and strength to perform manual labor tasks as needed. Flexibility to work various shifts or overtime as required by operational needs. A valid driver's license may be required based on job responsibilities. We encourage candidates who are passionate about maintaining high standards of facility care to apply for this essential role within our organization. Job Type: Full-time Benefits: 401(k) Dental insurance Flexible spending account Health insurance Life insurance Paid time off Tuition reimbursement Vision insurance Work Location: In person You should be proficient in: HVAC/R Systems Mechanical Troubleshooting Skills Commercial Electrical Expertise Electrical Troubleshooting Electrical Repair HVAC Maintenance Tape Measure Reading Service Maintenance and Repair Skills Machine Safety Inspections Machines & technologies you'll use: MIG Welder Multimeter Electric Pallet Jack Manual Grinder Pallet Jack Power Tools Manual Lathe Calipers and Micrometers Forklifts

Job Description **Job Title: Apartment Maintenance Technician** **Job Type:** Full-Time **About Us:** PDS is a leading property management company dedicated to providing high-quality living environments for our residents. We pride ourselves on our commitment to excellence and strive to create a welcoming community. We are currently seeking a skilled and motivated Apartment Maintenance Technician to join our dedicated team. **Job Summary:** As an Apartment Maintenance Technician, you will be responsible for ensuring the overall maintenance and upkeep of our residential properties. You will perform a variety of tasks including routine inspections, repairs, and installations to maintain our apartments in optimal condition. The ideal candidate is detail-oriented, possesses strong problem-solving skills, and has a customer service-oriented attitude. **Key Responsibilities:** - Conduct routine inspections of apartments and common areas to identify maintenance needs. - Perform general repairs related to plumbing, electrical systems, HVAC, carpentry, and appliance maintenance. - Respond promptly to residents' maintenance requests and work orders, ensuring timely completion and resident satisfaction. - Maintain accurate records of work performed and materials used for tracking and billing purposes. - Assist with preparing units for new residents, including painting, cleaning, and repairs. - Ensure compliance with safety regulations and maintenance standards. - Maintain tools and equipment in good working order; report any deficiencies or needs for replacement. - Communicate effectively with residents regarding maintenance issues and provide excellent customer service. - Participate in on-call rotations for emergency maintenance requests as required. - Collaborate with property management to plan and execute preventative maintenance programs. **Qualifications:** - High school diploma or equivalent; additional technical training or certifications in maintenance or a related field preferred. - Proven experience as a maintenance technician or in a similar role, ideally in residential property maintenance. - Strong knowledge of maintenance systems, plumbing, electrical, HVAC, and appliance repair. - Ability to use hand and power tools safely and effectively. - Excellent problem-solving skills with attention to detail. - Strong communication and interpersonal skills, with the ability to interact positively with residents and team members. - Must be able to lift and carry up to 40 pounds and perform physically demanding tasks (e.g., climbing ladders, lifting heavy objects).

Job DescriptionDescription: Belt Power LLC is the Nations leading full service distributor and fabricator specializing in the fulfillment of conveyor system requirements for the processing, manufacturing, and material handling industry. We place an emphasis on providing quality, value added components; as well as local service capabilities to support our customers' needs. Our product line ranges from all types of conveyor belting, conveying equipment and components, belting accessories, hose and fitting products, plastics, gasket, and power transmission products. Job Summary: The Maintenance Technician at Belt Power, LLC will be responsible for ensuring the optimal performance, reliability, and safety of all mechanical equipment and systems across all facilities. This role encompasses preventative maintenance, equipment repair, system troubleshooting, and occasional custom fabrication both in-house and at customer sites. The Maintenance Technician will lead and support efforts to minimize downtime, improve equipment effectiveness, and maintain safety standards across all maintenance operations. Responsibilities Include: Execute daily Preventive Maintenance (PM) and inspection tasks on production and auxiliary equipment, including but not limited to High Frequency presses, compressors, slitters, and rewinds. Perform mechanical corrective maintenance and repairs based on business priority and operational necessity. Troubleshoot, repair, and install mechanical systems and components, including hydraulic and pneumatic systems. Perform customization and fabrication of conveyor belts and other components per customer specifications. Maintain accurate and timely documentation of PMs, repairs, parts usage, and system modifications. Prioritize and implement proactive maintenance strategies to reduce breakdowns and enhance reliability. Lead and train maintenance team to ensure best practices, adherence to safety protocols, and continuous skills development. Coordinate and supervise third-party contractors when necessary. Manage and maintain an organize work environment while ensuring compliance with OSHA, customer-specific standards, and internal safety policies. Drive continuous improvement initiatives and participate in root cause analysis for equipment failures. Represent the company professionally during customer site visits and interactions Respect, protect, support, company culture. Observe all prescribed safety rules and regulations. Required to wear Personal Protection Equipment (PPE) Always represent Belt Power in a professional manner Performs other duties as assigned. Requirements: Requirements: Proven experience in industrial maintenance, including troubleshooting, repair, and installation of mechanical systems. Conveyor belt maintenance and fabrication Working knowledge of lean manufacturing priciples Organization and prioritization skills; attention to detail Strong mechanical background The ability to interpret and verify precise measurements using a tape measure. Proficient in reading mechanical schematics and understanding technical manuals Basic math skills and computer skills Mechanical Aptitude Adapt to changing situations Strong communication skills written and verbal Ability to lift up to 50 pounds, as well as ability to work at heights and tight spaces Overtime hours and weekend work may be required Valid driver's license and clean driving record Must be able to pass a drug screen and background check High school diploma or equivalent education Desired Characteristics: Ability and desire to quickly learn new processes and systems. Ability to work as part of a team and collaborate with colleagues. Reliability, integrity, accuracy, teamwork, positive attitude, organized, intelligent, proactive, and adaptable. Strong communication skills, both written and verbal. Physical Demands: The Maintenance Technician may lift and / or move up to 50 pounds and will require manual dexterity and strength in arms and feet to manipulate equipment controls. Tools, and other items used to make adjustments and/or minor maintenance. Will use hands, arms, back, and shoulders to handle, installs, position, move items, and manipulate other objects. Could be in a sitting, standing, bending, kneeling, or sitting position for long periods of time. Work Environment: Work is generally performed in a fabrication shop environment. The noise level is moderately loud. Generally well-ventilated and well lit. Shop employees may be required to wear protective clothing. Operation of heavy equipment and strict safety regulations are required. Position Type and Expected Hours of Work: This is a full-time position in office, shop, and at the customer site. Typical workdays and hours are Monday through Friday, 8am to 5pm. Frequent travel, overnight, overtime hours, and weekend work may be required.

Belt Power LLC is the Nations leading full service distributor and fabricator specializing in the fulfillment of conveyor system requirements for the processing, manufacturing, and material handling industry. We place an emphasis on providing quality, value added components; as well as local service capabilities to support our customers' needs. Our product line ranges from all types of conveyor belting, conveying equipment and components, belting accessories, hose and fitting products, plastics, gasket, and power transmission products. Job Summary: The Maintenance Technician at Belt Power, LLC will be responsible for ensuring the optimal performance, reliability, and safety of all mechanical equipment and systems across all facilities. This role encompasses preventative maintenance, equipment repair, system troubleshooting, and occasional custom fabrication both in-house and at customer sites. The Maintenance Technician will lead and support efforts to minimize downtime, improve equipment effectiveness, and maintain safety standards across all maintenance operations. Responsibilities Include: * Execute daily Preventive Maintenance (PM) and inspection tasks on production and auxiliary equipment, including but not limited to High Frequency presses, compressors, slitters, and rewinds. * Perform mechanical corrective maintenance and repairs based on business priority and operational necessity. * Troubleshoot, repair, and install mechanical systems and components, including hydraulic and pneumatic systems. * Perform customization and fabrication of conveyor belts and other components per customer specifications. * Maintain accurate and timely documentation of PMs, repairs, parts usage, and system modifications. * Prioritize and implement proactive maintenance strategies to reduce breakdowns and enhance reliability. * Lead and train maintenance team to ensure best practices, adherence to safety protocols, and continuous skills development. * Coordinate and supervise third-party contractors when necessary. * Manage and maintain an organize work environment while ensuring compliance with OSHA, customer-specific standards, and internal safety policies. * Drive continuous improvement initiatives and participate in root cause analysis for equipment failures. * Represent the company professionally during customer site visits and interactions * Respect, protect, support, company culture. * Observe all prescribed safety rules and regulations. * Required to wear Personal Protection Equipment (PPE) * Always represent Belt Power in a professional manner * Performs other duties as assigned. Requirements Requirements: * Proven experience in industrial maintenance, including troubleshooting, repair, and installation of mechanical systems. * Conveyor belt maintenance and fabrication * Working knowledge of lean manufacturing priciples * Organization and prioritization skills; attention to detail * Strong mechanical background * The ability to interpret and verify precise measurements using a tape measure. * Proficient in reading mechanical schematics and understanding technical manuals * Basic math skills and computer skills * Mechanical Aptitude * Adapt to changing situations * Strong communication skills written and verbal * Ability to lift up to 50 pounds, as well as ability to work at heights and tight spaces * Overtime hours and weekend work may be required * Valid driver's license and clean driving record * Must be able to pass a drug screen and background check * High school diploma or equivalent education Desired Characteristics: * Ability and desire to quickly learn new processes and systems. * Ability to work as part of a team and collaborate with colleagues. * Reliability, integrity, accuracy, teamwork, positive attitude, organized, intelligent, proactive, and adaptable. * Strong communication skills, both written and verbal. Physical Demands: The Maintenance Technician may lift and / or move up to 50 pounds and will require manual dexterity and strength in arms and feet to manipulate equipment controls. Tools, and other items used to make adjustments and/or minor maintenance. Will use hands, arms, back, and shoulders to handle, installs, position, move items, and manipulate other objects. Could be in a sitting, standing, bending, kneeling, or sitting position for long periods of time. Work Environment: Work is generally performed in a fabrication shop environment. The noise level is moderately loud. Generally well-ventilated and well lit. Shop employees may be required to wear protective clothing. Operation of heavy equipment and strict safety regulations are required. Position Type and Expected Hours of Work: This is a full-time position in office, shop, and at the customer site. Typical workdays and hours are Monday through Friday, 8am to 5pm. Frequent travel, overnight, overtime hours, and weekend work may be required.