Engineering Technician jobs at Los Alamos National Laboratory

**What You Will Do** **The Accelerator Operations and Technology Division (AOT), Radio Frequency Engineering (RFE) group is seeking an Engineering Technologist level 2 or level 3 for their 805 MHz HPRF team.** **The AOT division maintains, operates, and upgrades all accelerator systems used at the Los Alamos Neutron Science Center (LANSCE) complex. These consist of two 750-keV Cockcroft-Walton-based injector systems (H+ and H- systems), a 201.25-MHz drift-tube linear accelerator (LINAC) utilizing high-power diacrode tubes, an 805-MHz coupled cavity LINAC utilizing high-power klystrons as the primary power source, a proton storage ring, and roughly a kilometer of beam transport lines that deliver beam to the five independent research programs.** **The RFE group is principally responsible for all radio frequency (RF) systems. The group consists of three teams: (1) Low-Level RF (LLRF) focused on real-time phase and amplitude controls; (2) High-Power RF (HPRF) systems at 201 MHz; and (3) High-Power RF systems at 805 MHz.** **This position will be filled at either the Engineering Technologist 2 or Engineering Technologist 3 level, depending on the skills of the selected candidate. Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level.** **Engineering Technologist 2 ($94,500 - $154,600)** **The successful candidate, working closely with other engineers, technologists and technicians, will contribute to the operation, troubleshooting, and maintenance of the LANSCE 201.25-MHz and 805-MHz high-power RF (HPRF) systems, including high-voltage power supplies and associated electronics, and high-power RF test stand development and operation.** **The position will also involve working with High Voltage and RF engineers to plan and implement RF system upgrades, e.g., new klystron amplifiers and the newest solid-state high-voltage pulsed power systems. The position will involve prototype testing, data collection and analysis for design refinement of klystrons and modulators.** **The successful candidate will also provide on-call support for the LANSCE high power RF systems after hours and on weekends. The on-call assignment will typically be for one week per month during accelerator operations (approximately 7 months per year).** **Additionally, the position at this level will be responsible for planning and managing maintenance activities; analyzing RF system data to inform design enhancements for improving performance and reliability; planning, designing, implementing, and contribute to RF system upgrade projects, e.g. high-voltage convertor modulator power systems and klystron modulator monitoring and control systems.** **The successful candidate will also provide power electronics expertise to all segments of the group, particularly in the areas related to vacuum tube amplifiers and the equipment required to operate them.** **Engineering Technologist 3 ($104,100 - $172,200)** **In addition to what was outlined at the lower Technologist 2 level, the position at this level will be responsible for working with senior RF engineers in the specification development and procurement of new klystron amplifiers and the newest solid-state high-voltage pulsed power systems. The applicant will be responsible for leading the installation of a new High Power RF test stand at LANSCE.** **What You Need** **Minimum Job Requirements:** **Engineering Technologist 2** + Demonstrated experience in electrical engineering fields that support competency in microwave engineering such as high-voltage and pulsed-power engineering, RF power amplifiers, DC and pulsed-power systems, microwave and RF components, or RF transport systems. + Demonstrated electrical, electronics, and mechanical skills in an industrial or laboratory setting. + Experience reading and understanding schematics, working from documentation, diagrams, rough sketches, layouts, plans and written or verbal instructions. + Experience creating electrical and electronic schematics using CAD. + Demonstrated experience in effectively producing written documents (technical procedures) and successful oral communication skills. + Demonstrated record of working with others in the design, development, testing and installation of high-power RF vacuum tube-based amplifier systems and/or high-voltage systems. + Demonstrated technical skill in developing advanced concepts for high-power RF vacuum tube-based amplifier systems and/or high-voltage systems. + Demonstrated record of implementing engineering design in accordance with best practices and/or conduct on engineering principles. + Demonstrated skills in applying best practices and system engineering processes to requirement's definition and translating those requirements into designs that meet customer expectations. **Additional Job Requirements for Engineering Technologist 3:** + Demonstrated record of leading the design, development, testing and installation of high-power RF vacuum tube-based amplifier systems and/or high-voltage systems. + Demonstrated technical leadership in developing advanced concepts for high-power RF vacuum tube-based amplifier systems and/or high-voltage systems. + Demonstrated record of leading engineering design in accordance with best practices and/or conduct on engineering principles. + Experience leading the installation and commissioning of a completely new RF test station. + Experience designing and implementing a system to acquire, organize and analyze RF system performance data that will lead to the prediction of failures before they occur. **Education/Experience at Level 2** **: Position requires a bachelor's degree in engineering technology, Science, Math or related degree and 5 years of directly related experience; or an equivalent combination of education and experience directly related to the occupation.** **Education/Experience at Level 3** **: Position requires a bachelor's degree in engineering, Engineering Technology Science, Math or related degree from an accredited institution and eight (8) years of directly related experience; or an equivalent combination of education and experience directly related to the occupation.** **Desired Qualifications:** + Demonstrated record of contributions to the design, development, testing, and installation of high-power RF vacuum tube-based amplifier systems, high-voltage or pulsed power systems. + Demonstrated experience working as part of a team to develop RF amplifier and/or high-voltage systems. + Demonstrated recent and successful hands-on experience assembling, installing, testing and troubleshooting of high-power RF or pulsed power systems. + Experience with high-voltage DC and pulsed-power systems. + Experience with computer-based circuit layout and simulation (PSPICE, Multisim, LTSPICE, etc.) + Operations experience at an accelerator facility. **Note to Applicants** **: For full consideration, please provide a detailed cover letter and resume explaining how you meet the minimum and desired qualifications.** **Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory.** **Essential Job Functions** **(can perform with or without reasonable accommodation): Ability to speak, Ability to discriminate speech, Ability to hear in a normal range (20 Hz to about 20 KHz), Sitting, Standing, Walking, Climbing Ladders, Bending, Stooping, Crouching, Kneeling, Twisting the trunk or back, Lifting 30+ pounds, Carrying 30+ pounds, Use of both hands, Use of both arms, Reaching overhead, Reaching horizontally, Reaching down, Applying torque with hands or arms.** **Work Location** **: The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management.** **Position Commitment** **: Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year.** **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: + PPO or High Deductible medical insurance with the same large nationwide network + Dental and vision insurance + Free basic life and disability insurance + Paid childbirth and parental leave + Award-winning 401(k) (6% matching plus 3.5% annually) + Learning opportunities and tuition assistance + Flexible schedules and time off (PTO and holidays) + Onsite gyms and wellness programs + Extensive relocation packages (outside a 50 mile radius) **Additional Details** **Directive 206.2** - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2. Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. **No Clearance:** Position does not require a security clearance. Selected candidates will be subject to drug testing and other pre-employment background checks. **New-Employment Drug Test** : The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Regular Position** : Term status Laboratory employees applying for regular-status positions are converted to regular status. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy P701 for applicant eligibility requirements. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal, state, and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to ****************** or call ************** opt. 3.

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like Are you passionate about research dedicated to securing Operational Technology (OT) systems and thwarting cyber intrusions? Are you dreaming of a chance to develop protective technologies, help organizations improve their OT cyber security posture, develop new tools and processes, conduct threat assessments, and analyze government, military, and civilian OT systems? If so, you will want to apply for this opportunity to join Sandia's outstanding multidisciplinary team committed to solving the OT cyber security challenges facing our nation. As part of our team, you will engage in work to protect our nation from the world's most sophisticated threats to critical OT systems. To support Sandia's national security missions, our cybersecurity scientists and engineers engage in a variety of research areas including: * Improving the cyber security posture of OT systems and promoting further advancements via tools, training, and advocacy * Manual and automated reverse engineering, vulnerability assessment, and malware analysis * Network protection architectures for OT systems * Threat intelligence * Hardware and software trust and assurance * Security of all types of OT, including life safety systems, mission critical testers, and industrial control systems * The selected applicant can work a combination of onsite and offsite work. The selected applicant must live within a reasonable distance for commuting to the assigned work location when necessary. If applicable, relocation timing is flexible but must occur within one year of the start date, or sooner if possible. * Candidates must provide a list of five (5) relevant references who can specifically speak to their work and contributions within their company and beyond. These references should be able to address the skills, knowledge, and abilities (SKA) demonstrated at a Distinguished level, which is defined as exceptional performance that significantly exceeds standard expectations. Candidates being considered for Distinguished level at Sandia exhibit wake in overall impact to their company/organization, influence as the authority in the field, and reach within individuals across their company/organization, fostering connections beyond their immediate group/team. Additionally, wake includes the candidate's reputation, feedback from references, the quality of interactions with interviewers, and the overall perception of their skills and professionalism. Wake is used to look beyond short-term performance metrics, recognizing a candidate's broader influence within the organization and their field Salary Range $157,100 - $267,000 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * Master's degree in Computer Science, Computer Engineering, Software Engineering, Cyber Security, or related field, plus 12 or more years of relevant experience; or a PhD in Computer Science, Computer Engineering, Software Engineering, Cyber Security, or related field plus 8 years of relevant experience. * Proven expertise in OT cyber security, including lower-level (i.e., device-level) vulnerability research, red teaming, solution development, and/or OT assurance assessments, as well as higher-level strategy development. * Established authority in the field with experience conducting research and development resulting in creative technical solutions to significant and complex problems. * Demonstrated ability to lead multidisciplinary research and development teams, providing technical leadership and performing as a Principal Investigator. * Significant experience mentoring early- or mid-career staff/team members. * Active DOE Q security clearance is required to start with ability to obtain a SCI. Qualifications We Desire * At least 10 years of hands-on OT vulnerability research expertise with OT systems, with emphasis on discovering vulnerabilities and developing mitigation options for addressing vulnerabilities. * Experience using the NNSA Operational Technology Assurance Guidebook to perform OT assurance assessments. * Engagement with strategic initiatives, working with both staff and management, to identify emerging threats and challenges, and solutions and opportunities to address them. * Ability to conduct independent technical research and development, working under consultative direction rather than formal review. * Well-developed leadership skills with the ability to prioritize and execute in a disciplined and focused manner. * Strong oral and written communication skills, with the ability to explain complex ideas clearly and concisely. * Ability to build trusting, long lasting relationships with partners, customers, and internal stakeholders. * Work experience and demonstrated impact across multiple divisions within Sandia or across the Nuclear Security Enterprise, other government agencies, commercial partners, and/or international scientific and technical communities. * Active TS//SCI security clearance. About Our Team The Computer Systems Security Analysis R&D department carries out work to support various missions across Sandia and the federal government. The department focuses on computer system security surety and assessment of new technologies relating to IT and OT including software systems, computing systems, networks, and architectures of such systems. Topical areas include information assurance, digital forensics, cryptography, cognitive systems, control systems analysis, vulnerability analysis, reverse engineering, secure architecture design, network analysis and operational technology and industrial control systems. Some members of the team spend most days on-site doing classified work, some telecommute and come on-site once or twice a week, and others work virtually/remotely from other states with occasional travel to New Mexico. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Position requires a Department of Energy (DOE) Q security clearance to start, or equivalent active security clearance with another U.S. government agency (e.g., DOD). Sandia is required by DOE directive to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

About Sandia: Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: + Challenging work with amazing impact that contributes to security, peace, and freedom worldwide + Extraordinary co-workers + Some of the best tools, equipment, and research facilities in the world + Career advancement and enrichment opportunities + Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) + Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* *These benefits vary by job classification. What Your Job Will Be Like: Are you passionate about research dedicated to securing Operational Technology (OT) systems and thwarting cyber intrusions? Are you dreaming of a chance to develop protective technologies, help organizations improve their OT cyber security posture, develop new tools and processes, conduct threat assessments, and analyze government, military, and civilian OT systems? If so, you will want to apply for this opportunity to join Sandia's outstanding multidisciplinary team committed to solving the OT cyber security challenges facing our nation. As part of our team, you will engage in work to protect our nation from the world's most sophisticated threats to critical OT systems. To support Sandia's national security missions, our cybersecurity scientists and engineers engage in a variety of research areas including: + Improving the cyber security posture of OT systems and promoting further advancements via tools, training, and advocacy + Manual and automated reverse engineering, vulnerability assessment, and malware analysis + Network protection architectures for OT systems + Threat intelligence + Hardware and software trust and assurance + Security of all types of OT, including life safety systems, mission critical testers, and industrial control systems *The selected applicant can work a combination of onsite and offsite work. The selected applicant must live within a reasonable distance for commuting to the assigned work location when necessary. If applicable, relocation timing is flexible but must occur within one year of the start date, or sooner if possible. * Candidates must provide a list of five (5) relevant references who can specifically speak to their work and contributions within their company and beyond. These references should be able to address the skills, knowledge, and abilities (SKA) demonstrated at a Distinguished level, which is defined as exceptional performance that significantly exceeds standard expectations. Candidates being considered for Distinguished level at Sandia exhibit wake in overall impact to their company/organization, influence as the authority in the field, and reach within individuals across their company/organization, fostering connections beyond their immediate group/team. Additionally, wake includes the candidate's reputation, feedback from references, the quality of interactions with interviewers, and the overall perception of their skills and professionalism. Wake is used to look beyond short-term performance metrics, recognizing a candidate's broader influence within the organization and their field Salary Range: $157,100 - $267,000 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require: + Master's degree in Computer Science, Computer Engineering, Software Engineering, Cyber Security, or related field, plus 12 or more years of relevant experience; or a PhD in Computer Science, Computer Engineering, Software Engineering, Cyber Security, or related field plus 8 years of relevant experience. + Proven expertise in OT cyber security, including lower-level (i.e., device-level) vulnerability research, red teaming, solution development, and/or OT assurance assessments, as well as higher-level strategy development. + Established authority in the field with experience conducting research and development resulting in creative technical solutions to significant and complex problems. + Demonstrated ability to lead multidisciplinary research and development teams, providing technical leadership and performing as a Principal Investigator. + Significant experience mentoring early- or mid-career staff/team members. + Active DOE Q security clearance is required to start with ability to obtain a SCI. Qualifications We Desire: + At least 10 years of hands-on OT vulnerability research expertise with OT systems, with emphasis on discovering vulnerabilities and developing mitigation options for addressing vulnerabilities. + Experience using the NNSA Operational Technology Assurance Guidebook to perform OT assurance assessments. + Engagement with strategic initiatives, working with both staff and management, to identify emerging threats and challenges, and solutions and opportunities to address them. + Ability to conduct independent technical research and development, working under consultative direction rather than formal review. + Well-developed leadership skills with the ability to prioritize and execute in a disciplined and focused manner. + Strong oral and written communication skills, with the ability to explain complex ideas clearly and concisely. + Ability to build trusting, long lasting relationships with partners, customers, and internal stakeholders. + Work experience and demonstrated impact across multiple divisions within Sandia or across the Nuclear Security Enterprise, other government agencies, commercial partners, and/or international scientific and technical communities. + Active TS//SCI security clearance. About Our Team: The Computer Systems Security Analysis R&D department carries out work to support various missions across Sandia and the federal government. The department focuses on computer system security surety and assessment of new technologies relating to IT and OT including software systems, computing systems, networks, and architectures of such systems. Topical areas include information assurance, digital forensics, cryptography, cognitive systems, control systems analysis, vulnerability analysis, reverse engineering, secure architecture design, network analysis and operational technology and industrial control systems. Some members of the team spend most days on-site doing classified work, some telecommute and come on-site once or twice a week, and others work virtually/remotely from other states with occasional travel to New Mexico. Posting Duration: This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance: Position requires a Department of Energy (DOE) Q security clearance to start, or equivalent active security clearance with another U.S. government agency (e.g., DOD). Sandia is required by DOE directive to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs: If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Job ID: 696578 Job Family: RD Regular/Temporary Position: R Full/Part-Time Status: F

**What You Will Do** **The Plutonium Facilities Engineering Division (PFE-DO) and the RCMR group at Los Alamos National Laboratory are seeking an Engineering Technologist. Put your talents to work by joining our world-class Engineering team! Our workforce thrives in a collaborative environment that values creativity, innovation, and problem solving-where every idea and perspective matters. This is your opportunity to make a meaningful impact by contributing to vital systems that support our nation's security mission.** **Engineering Technologist 3 - $104,100 - $172,200** In this position, successful candidates will apply the principles and theories of engineering, mathematics, and science to solve technical problems in support of engineering projects and research. They will plan and execute complex assignments requiring initiative, sound judgment, and technical expertise. Responsibilities include facility design, operation, maintenance, project execution, and/or research-based engineering. Candidates must work effectively both independently and collaboratively, using engineering and computer tools to deliver efficient, accurate, and high-quality results while continuously improving processes to meet customer needs. Safety and security are a primary responsibility; employees must ensure compliance, maintain training, and stop work if continuing is unsafe or compromises security. The technologist will plan and schedule detailed phases of engineering work, resolve design and coordination issues, and apply professional concepts to develop creative, effective solutions. They will prepare specifications and evaluations, conduct technical research, and coordinate with multidisciplinary teams, clients, and contractors. The role may include leading or mentoring staff, supporting project controls and estimates, and ensuring adherence to established engineering policies and Laboratory standards. The successful candidate will foster a respectful, inclusive, and collaborative work environment. **Engineering Technologist 4 - $114,700 - $191,200** In addition to the responsibilities outlined for Level 3, the technologist at this higher level will collaborate with junior and senior engineers to deliver integrated, full-system design solutions through mentorship and technical leadership. They will support and lead research and engineering initiatives that demand innovation, independence, and expert judgment. The Technologist 4 will independently plan and execute detailed phases of engineering work, leading efforts that address complex or unique technical challenges requiring advanced insight. They will develop new methods, techniques, and solutions across related disciplines, exercising significant latitude in determining objectives, priorities, and procedures. The incumbent initiates and reviews work for self and others, provides technical oversight, and coordinates multidisciplinary engineering efforts with clients, suppliers, contractors, and internal partners. \#shiftwork **What You Need** **Minimum Job Requirements:** + Expert knowledge of computer-aided drafting techniques, CAD modeling, and design + Expert knowledge of complex mathematical formulas and computations + Expert knowledge of engineering work planning and control methods + Expert knowledge of engineering principles and technical responsibilities within the designated discipline + Expert knowledge of relevant Laboratory procedures, standards, and guides + Expert knowledge of industry, regulatory, and DOE/NNSA codes, standards, and criteria pertinent to the discipline **Additional Job Requirements for Engineering Technologist 4 :** In addition to the requirements outlined above, qualification at the higher level requires: + Advanced-level expertise in the principles and theories of engineering, mathematics, and science applied to unique or complex problems + Demonstrated experience leading or mentoring others in technical areas or project subgroups **Education/Experience at lower level:** Position requires a Bachelor' Degree in Engineering, Engineering Technology, Science, Math or related degree from an accredited institution and 8 years of directly related experience; or an equivalent combination of education and experience directly related to the occupation. **Education/Experience at higher level:** Position requires a Bachelor' Degree in Engineering, Engineering Technology, Science, Math or related degree from an accredited institution and 12 years of directly related experience; or an equivalent combination of education and experience directly related to the occupation. **Desired Qualifications:** + Experience developing innovative engineering solutions or tools that improve efficiency or performance + Demonstrated success in mentoring or training junior staff + Proficiency with emerging analytical, modeling, or simulation software beyond standard CAD and industrial control tools + Strong written and verbal communication skills for coordination across disciplines and with external partners + Experience in research-based engineering environments or national laboratory settings + Knowledge of advanced DOE/NNSA engineering directives, design codes, and compliance frameworks + Proven ability to identify process improvements and implement solutions that enhance safety, quality, or efficiency **Essential Job Functions** (can perform with or without reasonable accommodation): General Physical Mobility, standing, walking, climbing stairs, bending. Specific Physical Mobility use of both hands, use of both arms, use of both legs, use of both feet, carry/lift to 20 pounds. **Work Schedule:** This position may require 24/7 coverage, which could involve working a shift/weekend schedule. Employees may be eligible for shift differential pay when assigned by their manager. Shift/weekend assignments are at the discretion of the manager. **Work Environment:** Work in a noisy environment, work near sources of ionizing and non-ionizing radiation, work near machinery with moving parts, working overtime or an irregular schedule. **Work Location:** The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management. **Position commitment:** Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year. **Note to Applicants:** Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: + PPO or High Deductible medical insurance with the same large nationwide network + Dental and vision insurance + Free basic life and disability insurance + Paid childbirth and parental leave + Award-winning 401(k) (6% matching plus 3.5% annually) + Learning opportunities and tuition assistance + Flexible schedules and time off (PTO and holidays) + Onsite gyms and wellness programs + Extensive relocation packages (outside a 50 mile radius) **Additional Details** **Directive 206.2** - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2. Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. **Clearance: Q** (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad. *Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 for additional information. **HRP:** This position is subject to the requirements of the DOE Human Reliability Program as specified in 10 Code of Federal Regulation, Part 712, §712.11. These requirements include on going drug and alcohol testing, as well as periodic medical and psychological evaluations. **New-Employment Drug Test:** The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Regular position:** Term status Laboratory employees applying for regular-status positions are converted to regular status. **Term position:** Regular-status Laboratory employees applying for term-status positions may retain regular status with approval of the cognizant Principle Associate Director. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy P701 for applicant eligibility requirements. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal, state, and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to ****************** or call ************** opt. 3.

**What You Will Do** The Pit Technologies (PT) Division of Los Alamos National Laboratory is the operational group at the forefront of plutonium pit manufacturing and surveillance, which enable the modernization and continued stewardship of the United States' thermonuclear weapons stockpile. This position is assigned to the Tooling Design Team within the Engineering and Product Support Group (PT-5) of PT Division. The team provides design and configuration management services for the tooling that enables all aspects of the division's diverse mission set, which includes manufacturing 30 plutonium pits per year by 2026, surveilling pits in the stockpile stewardship program, and other national security missions. **Engineering Technologist 1 $85,900 - $139,900** As an Engineering Technologist assigned to the Engineering and Product Support Group you will support the development of tooling and equipment for all Pit Technologies groups and operations, and will be responsible for performing all of the following activities: tooling design and prototyping, reverse engineering, rapid prototyping, and process development. You will work closely with other Pit Technologies product engineering, design, and fabrication personnel in a dynamic and collaborative work environment to supply customers with timely and novel tooling designs that are fit for use in a Category 2 nuclear facility. **Engineering Technologist 2 $94,500 - $154,600** In addition to what was outlined at the lower level, at this level you will be expected to mentor lower-level designers on the principles, theories, concepts, and techniques within relevant engineering disciplines, lead continuous process improvement projects, and complete more challenging or novel design projects with little to no supervision. You will be required to resolve a wide range of issues in creative ways, and contribute to the development of the team's goals and objectives. **What You Need** **Minimum Job Requirements:** **Computer-aided Design** + Basic knowledge of computer-aided drafting techniques, CAD modeling and design. + Basic understanding of modeling and drawing drafting principals, application of standards, symbols, notes, GD&T on drawings and models to capture design intent + Basic understanding of ASME, ANSI, AWS and related industry standards for addressing fit, form and function **Mechanical/Machining** + Basic knowledge of engineering work planning and control methods + Basic understanding of engineering, design, and drafting concepts related to a mechanical, electro/mechanical or electrical disciplines + Basic knowledge of principles for design, fabrication, assembly and fielding of components and mechanisms + Basic understanding of component and tool design, fixturing, printed circuit boards, schematics, and facility equipment + Basic understanding of machine shop equipment like a mill, lathe, drill press, welder and inspection equipment + Basic understanding of engineering materials and their suitability for component design and manufacture. **Teamwork** + Experience working in diverse teams, collaborating on novel designs from rough sketches with minimal guidance from a senior level technicians **Additional Job Requirements for Engineering Technologist 2** + Working knowledge and proficiency in the above skills and knowledge areas + The ability and desire to mentor lower-level designers and check their work for accuracy and adequacy **Education and Experience (Engineering Technologist 1)** Position requires a Bachelor's Degree in Engineering Technology, Science, Math or related degree from an accredited institution and 2 years related experience; or, an equivalent combination of education and experience directly related to the occupation. **Education and Experience (Engineering Technologist 2)** Position requires a Bachelor's Degree in Engineering Technology, Science, Math or related degree from an accredited institution and 5 years of directly related experience; or, an equivalent combination of education and experience directly related to the occupation. **DOE Order 426.2:** Requires a High School Diploma **Desired Qualifications:** + Experience with Creo Parametric and PDMLink. + Demonstrated knowledge and experience working with GD&T. An ASME GDTP Technologist certification is desired at the higher level. + Demonstrated knowledge of reverse engineering and rapid prototyping. + Demonstrated technical knowledge of production processes related to manufacturing. + Demonstrated experience with mathematical formulas, computations, and data gathering methods. + Active DOE "Q" clearance (or equivalent). **Work Location:** The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management. **Position commitment:** Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year. **Note to Applicants:** **For Full Consideration:** Applicants must include a resume with a cover letter that addresses all of the minimum requirements of the position; any additional desired requirements should also be addressed. Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: § PPO or High Deductible medical insurance with the same large nationwide network § Dental and vision insurance § Free basic life and disability insurance § Paid childbirth and parental leave § Award-winning 401(k) (6% matching plus 3.5% annually) § Learning opportunities and tuition assistance § Flexible schedules and time off (PTO and holidays) § Onsite gyms and wellness programs § Extensive relocation packages (outside a 50 mile radius) **Additional Details** **Directive 206.2** - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2 (******************************************************************** . Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. **Clearance: Q** (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad. *Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 (********************************************************************************************* for additional information. **HRP:** This position is subject to the requirements of the DOE Human Reliability Program as specified in 10 Code of Federal Regulation, Part 712, §712.11. These requirements include on going drug and alcohol testing, as well as periodic medical and psychological evaluations. **426.2:** This position is subject to DOE Order 426.2, Personnel Selection, Training, and Qualification Requirements for DOE Nuclear Facilities, which establishes entry-level requirements to ensure candidates selected for specific positions can successfully perform the requirements of the job. **New-Employment Drug Test:** The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Regular position:** Term status Laboratory employees applying for regular-status positions are converted to regular status. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy Policy P701 (*********************************************** for applicant eligibility requirements. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal, state, and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to ****************** or call ************** opt. 3.

**What You Will Do** **Pulsed Power Engineering Technologist 1 ($85,900 - $139,900)** The DARHT Engineering Operations and Physics Group (J-6) is seeking a Pulsed Power Engineering Technologist I to join the Pulsed Power Team! J-6 provides state-of-the-art accelerator, pulsed power, beam-target, and radiographic physics capabilities in support of the Laboratory's hydrodynamic test mission. Core responsibilities of the team include: (a) troubleshooting, maintaining, and upgrading of the Dual-Axis Radiographic Hydrodynamic Test (DARHT) accelerator pulsed power systems, and (b) designing, modeling, developing, and implementing new pulsed power sources and systems relating to accelerator applications. The successful applicant will be assigned to the Pulsed Power Team in the DARHT Engineering Operations and Physics Group (J-6). The successful applicant will work on pulsed power systems at DARHT and associated test stands. Roles and responsibilities include: + Performing electrical and mechanical maintenance of the pulsed power systems driving the DARHT accelerators + Maintaining, refurbishing, and upgrading DARHT linear induction cells + Performing electrical and mechanical assembly, installation, and maintenance of DARHT pulsed power test stands + Operating pulsed power test stands and verifying that equipment passes electrical and mechanical tests + Writing technical reports, documents, and presentations + Maintaining up to date documentation of procedures, processes, and equipment + Operating cranes and forklifts **What You Need** **Minimum Job Requirements:** **Electrical Engineering Knowledge** + Proven experience working with electrical circuits and high voltage components + Ability to read and understand electrical schematics + Proven history fabricating electrical equipment and components (e.g., soldering and wiring) **Laboratory Experience** + Demonstrated knowledge and experience working on mechanical systems with hand and/or power tools + Working knowledge of vacuum systems + Operating power supplies, scopes, digitizers, and laboratory data acquisition systems **Communication Skills** + Excellent interpersonal, verbal, and written communication skills and demonstrated experience interacting with all levels of personnel and customers **Lifelong learner** + Willing to acquire new skills and step out of your comfort zone + Fast learner **Education/Experience:** **Position requires a Bachelor's Degree in Engineering Technology, Science, Math or related degree from an accredited institution and 2 years related experience; or, an equivalent combination of education and experience directly related to the occupation.** **Desired Qualifications:** **High Energy Systems Experience and Knowledge** + Demonstrated experience working with pulsed power, electrical energy storage, electrical switching circuits or other types of high-energy systems + Demonstrated experience working on pulsed power or high voltage systems + Proven safety knowledge with HV electrical circuits **Solid State Electronics Knowledge** + Specific knowledge of MOSFETs, SCRs, and analog design **Formality of Operations** + Demonstrated experience working in environments with a high level of operational formality **Electrical Engineering Knowledge** + Knowledge of and experience in fundamentals of electrical engineering including circuit design, modeling, and circuit simulation tools such as SPICE **Accelerator Experience** + Experience with linear induction accelerators **Work Location:** The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management. **Position commitment:** Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year. **Note to Applicants:** **Along with your resume, please include a detailed cover letter explaining how you meet each of the minimum requirements and any of the desired qualifications.** Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: § PPO or High Deductible medical insurance with the same large nationwide network § Dental and vision insurance § Free basic life and disability insurance § Paid childbirth and parental leave § Award-winning 401(k) (6% matching plus 3.5% annually) § Learning opportunities and tuition assistance § Flexible schedules and time off (PTO and holidays) § Onsite gyms and wellness programs § Extensive relocation packages (outside a 50 mile radius) **Additional Details** **Directive 206.2** - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2 (******************************************************************** . Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. **Clearance:** **Q** (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad. *Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 (********************************************************************************************* for additional information. **New-Employment Drug Test:** The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Regular position:** Term status Laboratory employees applying for regular-status positions are converted to regular status. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy Policy P701 (*********************************************** for applicant eligibility requirements. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal, state, and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to ****************** or call ************** opt. 3.

**What You Will Do** As a member of the Metal Production Group (PSD-1) an Engineering Technologist 1 will use and execute the principles of engineering to solve technical problems in support of pit manufacturing programs at LANL. A successful candidate will be expected to prioritize work based on programmatic demands, work both independently, and as part of a team; and contribute to continuous process improvements to meet customer requirements. **Specific job duties include, but are not limited to:** + Uses professional concepts and laboratory objectives to resolve complex issues in creative and effective ways. + Contributes to the development of new methods and approaches. + Applies engineering, mathematics, and science knowledge to solve routine technical problems. + Work with engineering staff to prepare and/or carry out changes in design, drafting, techniques, and procedures; coordinate corrective actions. + Aiding & mentoring early career engineers & technicians + Adapt to evolving requirements while meeting safety, security, compliance, and schedule imperatives. + Assist in developing new methods, technologies, and analysis techniques for institutional programs. + Ensure programmatic objectives through the provision of project management and engineering support to successfully complete milestones. **What You Need** **Minimum Job Requirements** + Basic knowledge of engineering concepts, principles, practices, and procedures + Basic knowledge of engineering design + Demonstrated ability to express ideas clearly in oral and written communications + Demonstrated capability/experience performing a broad range of complex engineering work, including experience designing or reviewing a complete project, system, or component + Demonstrated knowledge of manufacturing, system and component testing operations + Demonstrated experience developing and validating engineering requirements **Analytical thinking skills** + Ability to coordinate work and/or corrective actions + Demonstrated experience with continuous improvement of concepts and tools. + Demonstrated commitment to high quality and timeliness of deliverables. + Demonstrated ability to work independently in high-intensity environments with coworkers representing a variety of technical backgrounds. + Demonstrated ability to express detailed ideas clearly in ways that build understanding, respect, and trust, as demonstrated through presentations and publications. **Education/Experience:** Position requires a Bachelor's Degree in Engineering Technology, Science, Math or related degree from an accredited institution and 2 years related experience; or, an equivalent combination of education and experience directly related to the occupation. **DOE Order 426.2:** Requires at least 1 year of nuclear experience. **Desired Experience** **Experience in various work environments** + Demonstrated knowledge or experience working in a manufacturing or production organization requiring implementation of defined manufacturing, testing, and quality requirements. **Quality and Improvement** + Demonstrated knowledge and experience with system and subsystem qualification testing and/or analysis. + Demonstrated experience applying continuous improvement concepts and tools. + Demonstrated knowledge of conduct of operations principles. + Demonstrated experience performing engineering work using rigorous institutional processes. + Active Q clearance or equivalent **Notes to Applicants:** + Please submit a detailed resume highlighting all your experience and achievements to be considered for this position. + Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China, the Islamic Republic of Iran, the Democratic People's Republic of North Korea, and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: § PPO or High Deductible medical insurance with the same large nationwide network § Dental and vision insurance § Free basic life and disability insurance § Paid childbirth and parental leave § Award-winning 401(k) (6% matching plus 3.5% annually) § Learning opportunities and tuition assistance § Flexible schedules and time off (PTO and holidays) § Onsite gyms and wellness programs § Extensive relocation packages (outside a 50 mile radius) **Additional Details** **Directive 206.2 -** Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2. Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. **Clearance: Q** (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad. ***Eligibility requirements:** To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 for additional information. **HRP:** This position is subject to the requirements of the DOE Human Reliability Program as specified in 10 Code of Federal Regulation, Part 712, §712.11. These requirements include on going drug and alcohol testing, as well as periodic medical and psychological evaluations. **426.2:** This position is subject to DOE Order 426.2, Personnel Selection, Training, and Qualification Requirements for DOE Nuclear Facilities, which establishes entry-level requirements to ensure candidates selected for specific positions can successfully perform the requirements of the job. **New-Employment Drug Test:** The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Regular position:** Term status Laboratory employees applying for regular-status positions are converted to regular status. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy Policy P701 for applicant eligibility requirements. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal, state, and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to ****************** or call ************** opt. 3.

**What You Will Do** **The Plutonium Facilities Engineering Division (PFE-DO) and the RCMR group at Los Alamos National Laboratory are seeking an Engineering Technologist. Put your engineering talents to good use by joining our world-class Engineering team! Our workforce thrives in an environment that values creativity and problem solving, where every idea and perspective is welcomed. This is your chance to make a real difference while working on important systems directly impacting national security.** In this position, successful candidates will apply the principles and theories of engineering, mathematics, and science to solve technical problems within their discipline in support of engineering projects and research activities. They will assist in planning and executing assignments that require initiative, analytical ability, and sound technical judgment. The technologist will support work related to facility design, operation, maintenance, project execution, and/or research-based engineering. They must be able to work both independently and collaboratively as part of a multidisciplinary team, using engineering and computer technologies to complete tasks efficiently and accurately while continuously seeking opportunities to improve processes and deliver quality results. The technologist will ensure compliance with all safety and security requirements, maintain required training, and integrate safety and security into every task, including stopping work if continuing is unsafe or compromises security. The technologist will apply established engineering principles, theories, and techniques to perform technical assignments, resolve routine design issues, and support the development of project specifications and evaluations. They will contribute to studies that define and assess design criteria for systems, structures, and equipment; assist in preparing and reviewing technical documentation; and participate in technical research and data collection in support of engineering analyses. This role includes preparing or reviewing CAD drawings, performing calculations, and using analytical and scientific software to solve engineering problems. The technologist may provide technical directions to design and drafting personnel, support bid evaluations, and recommend actions on client requests or design changes. Lastly, the incumbent must adhere to Laboratory engineering policies, procedures, and standards while fostering a respectful, inclusive, and harassment-free work environment. **What You Need** **Minimum Job Requirements:** + Working knowledge of computer-aided drafting techniques, CAD modeling, and design + Sound knowledge of mathematical formulas, computations, and data gathering methods + Working knowledge of engineering work planning and control methods + Understanding of engineering principles, design, and systems technology within the assigned discipline + Familiarity with relevant Laboratory procedures, standards, and guides + Knowledge of industry, regulatory, and DOE/NNSA codes, standards, and criteria pertinent to the engineering discipline **Education/Experience at lower level:** **Position requires a bachelor's degree in Engineering Technology, Science, Math or related degree and 5 years of directly related experience; or an equivalent combination of education and experience directly related to the occupation.** **Desired Qualifications:** + Experience supporting large or multidisciplinary engineering projects + Familiarity with Laboratory project control processes, cost estimates, or change management procedures + Experience preparing or reviewing engineering change orders or technical documentation + Proficiency in additional or advanced analytical, modeling, or visualization software beyond standard CAD tools + Strong communication skills and the ability to work effectively in team-based technical environments + Demonstrated commitment to process improvement, innovation, and continuous learning + Interest in contributing to mission-driven engineering solutions that support national security objectives **Essential Job Functions** (can perform with or without reasonable accommodation): General Physical Mobility, standing, walking, climbing stairs, bending. Specific Physical Mobility use of both hands, use of both arms, use of both legs, use of both feet, carry/lift to 20 pounds. **Work Schedule:** This position may require 24/7 coverage, which could involve working a shift/weekend schedule. Employees may be eligible for shift differential pay when assigned by their manager. Shift/weekend assignments are at the discretion of the manager. **Work Environment:** Work in a noisy environment, work near sources of ionizing and non-ionizing radiation, work near machinery with moving parts, working overtime or an irregular schedule **Work Location:** The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management. **Position commitment:** Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year. **Note to Applicants:** Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: + PPO or High Deductible medical insurance with the same large nationwide network + Dental and vision insurance + Free basic life and disability insurance + Paid childbirth and parental leave + Award-winning 401(k) (6% matching plus 3.5% annually) + Learning opportunities and tuition assistance + Flexible schedules and time off (PTO and holidays) + Onsite gyms and wellness programs + Extensive relocation packages (outside a 50 mile radius) **Additional Details** **Directive 206.2** - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2. Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. **Clearance: Q** (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad. *Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 for additional information. **HRP:** This position is subject to the requirements of the DOE Human Reliability Program as specified in 10 Code of Federal Regulation, Part 712, §712.11. These requirements include on going drug and alcohol testing, as well as periodic medical and psychological evaluations. **New-Employment Drug Test:** The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Regular position:** Term status Laboratory employees applying for regular-status positions are converted to regular status. **Term position:** Regular-status Laboratory employees applying for term-status positions may retain regular status with approval of the cognizant Principle Associate Director. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy P701 for applicant eligibility requirements. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal, state, and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to ****************** or call ************** opt. 3.

**What You Will Do** The Advanced Sources and Detector (ASD) Project Office is responsible for the fabrication, installation, and commissioning of an ~ 20 MeV linear induction electron accelerator, through the coordination of efforts at Los Alamos, Lawrence Livermore National Laboratory, Sandia National Laboratories, and the Nevada National Security Site (NNSS). Nicknamed Scorpius, the machine will be used to diagnose subcritical experiments at the NNSS, within an underground complex (U1a; 963 feet below grade) in support of the Enhanced Capabilities for Subcritical Experiments Program. The ASD Project needs an engineering technologist to help construct several parts of the accelerator including tasks of: IVAs, SAC subassemblies, SAC assemblies, LRU-8 integration, coordinate with inventory area, and project planning and assembly of the accelerator subsystem. As the Engineering Technologist for the ASD Project, you will work with the Accelerator IVA, SAC subassembly, SAC assembly, and LRU-8 engineering team to procure, kit and assemble components. These components will be installed at the U1a complex at the NNSS. You will coordinate work and work with engineers and other SME`s on assembly steps. This position may include travel to vendors and to NNSS and LLNL and will report to the ASD operations manager. As the ASD Engineering technologist, you will be responsible for the following: + Fabrication, assembly and testing of accelerator and downstream region components. + Work closely with Production Engineer on work associated with assembly. + Work various teams and deployed safety people. + Ensure components have been inspected and staged ready for use. + Ensure quality assurance (SD330) and 413.3B project requirements. + Look for opportunities to enhance the assembly. + Work with the technical team to coordinate opportunities and efficiencies between the subsystems for Scorpius. + Provide maintenance support for major personnel and equipment. + Work closely with technicians and engineers from our own and other maintenance support teams across the facility. + Interact and collaborate effectively with internal and external colleagues at the team, group, division, and laboratory levels. + Complete all training in a reasonable time. **What You Need** **Minimum Job Requirements:** **Engineering Technologist 1 - 85,900 - 139,900** + Basic understanding of drawings and Geometric Dimensioning and Tolerancing (GD&T). + Experience assembling and disassembling parts from drawings and procedures. + Familiarity with common lab test equipment: digital multi-meters, oscilloscopes, power supplies, etc. + Ability to work effectively in a team environment, as well as function independently on individual assignments. + Ability to use standard shop tools such as drills, saws, punches. + The ability to obtain forklift and crane certification. **Engineering Technologist 2 - 94,500 - 154,600** + Working Knowledge of drawings and Geometric Dimensioning and Tolerancing (GD&T). + Working knowledge of SolidWorks, CREO to design and fabricate components + Intermediate experience assembling and disassembling parts from drawings and procedures. + Working knowledge of common lab test equipment: digital multi-meters, oscilloscopes, power supplies, etc. + Be familiar with vacuum systems, KF, CF, roughing pumps and turbomolecular pumps. + Swagelok, plumbing NPT for PVC Pipe Fitting, ANSI and Metric threads. **Education/Experience at lower level:** **Engineering Technologist 1** Position requires a bachelor's degree in engineering technology, Science, Math or related degree and 2 years of directly related experience; or an equivalent combination of education and experience directly related to the occupation. **Education/Experience at higher level:** **Engineering Technologist 2** Position requires a bachelor's degree in engineering technology, Science, Math or related degree and 5 years of directly related experience; or an equivalent combination of education and experience directly related to the occupation. **Desired Qualifications:** + Current forklift and crane certification. + Experience working with drawing and procedures. + Understanding disciplined operations. + Knowledge of accelerator systems and components. **Work Environment:** **Work Location:** The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management. **Position commitment:** Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year. **Note to Applicants:** Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Although the primary responsibilities of this position are associated with work at Los Alamos National Laboratory, regular travel is required to vendor sites and to the Nevada Test Site for supporting installation activities. **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: + PPO or High Deductible medical insurance with the same large nationwide network + Dental and vision insurance + Free basic life and disability insurance + Paid childbirth and parental leave + Award-winning 401(k) (6% matching plus 3.5% annually) + Learning opportunities and tuition assistance + Flexible schedules and time off (PTO and holidays) + Onsite gyms and wellness programs + Extensive relocation packages (outside a 50 mile radius) **Additional Details** **Directive 206.2** - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2 (******************************************************************** . Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. **No Clearance:** Position does not require a security clearance. The candidate must be at least 18 years of age; **U.S. citizenship is required** due to the requirements for the work facility. Selected candidates will be subject to drug testing and other pre-employment background checks. **New-Employment Drug Test:** The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Regular position:** Term status Laboratory employees applying for regular-status positions are converted to regular status. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy Policy P701 (*********************************************** for applicant eligibility requirements. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal, state, and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to ****************** or call ************** opt. 3.

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like We are seeking a highly skilled and motivated Electromechanical Technologist to join our dynamic team. The successful candidate will be responsible for maintaining and managing a hardware prototyping laboratory, assisting with the operation and maintenance of the 3D printing laboratory, and contributing on multidisciplinary R&D team efforts. Additionally, the candidate will contribute to our overarching mission of developing and implementing technologies to address critical U.S. national security challenges. On any given day, you may be called upon to: * Provide technical support for design and engineering efforts on new capabilities in collaboration with our development teams * Assist other staff as a contributor on some of our most critical projects * Troubleshoot and resolve technical issues on projects and for our organization's mission needs * Work with cross-functional teams to help identify project requirements and develop solutions that meet those needs * Stay up to date with current and emerging best practices to ensure project and mission success Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range $72,800 - $140,600 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * High school diploma plus three or more years of directly related experience, or equivalent combination of education and experience * Demonstrated hands-on experience working with contemporary electromechanical technologies to include any one or more of the following: fabrication, assembly, troubleshooting, CAD/design, basic software skills, and/or advanced manufacturing * Ability to obtain and maintain a DOE Q-level security clearance Qualifications We Desire * Undergraduate STEM degree * Competency designing and assembling advanced electromechanical technologies * Experience implementing integrated hardware/software solutions * Ability to work on tasking independently * Any form of demonstrated leadership and/or mentorship of others * Experience working in mission-focused environments with access to sensitive and classified information * Ability to work in a fast-paced environment with multiple priorities and tight deadlines * Willingness to travel domestically if/when needed (less than 15% of the time) About Our Team Organization 06565 Unmanned Systems & Autonomy R&D specializes in robotic automation, autonomous operations of uncrewed systems, advanced controls, miniature mechanical design and fabrication, advanced drive system development, and the human/machine interface. We solve manufacturing (fabrication, inspection, assembly, certification) automation challenges unique to our government sponsors and we advance national security by providing next generation remote systems and automation/autonomy solutions. We have established leadership in this field through capabilities such as active, autonomous perception, distributed control of heterogeneous systems, real-time control of dynamic systems, autonomous manipulation, miniature mechatronic design and fabrication, and advanced human-machine interface R&D. With state-of-the-art facilities, we are using subject matter experience in uncrewed systems R&D to design and deploy systems to address critical national security challenges. The department conducts numerous active research, development, and application projects for a variety of customers, both internal to Sandia and across the national security establishment, collaborating heavily with partners across Sandia. The department is one of six in the Critical Asset Security Group within the Weapon and Force Protection Center, and we readily partner across nearly every mission at Sandia. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Essential Functions If offered the position, you may be required to demonstrate your fitness to perform certain physical aspects of the position, including lifting, carrying, pushing, and pulling. Apply for Job * Careers * Sign In * New User

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like We are seeking a skilled Electromechanical Technologist to join our team. In this role, you will play a crucial part in the design, implementation, and maintenance of data acquisition and control systems. Your expertise will help ensure the reliability and efficiency of our operations, contributing to the overall success of our projects. You will collaborate with cross-functional teams to identify and address technical challenges, fostering a culture of innovation and continuous improvement. On any given day, you may be called on to: * Provide designs, controls, and engineering support for data acquisition and control systems. * Conduct testing and oversight of existing data acquisition and control systems. * Maintain data acquisition and control systems software and hardware. * Implement software data analytics routines into programs for non-technical operators. * Assist with the implementation and commissioning of contractor-supplied software into current and future operations control and data acquisition systems. * Troubleshoot problems and implement workable solutions as required. Due to the nature of the role, this candidate must be able to work onsite. Salary Range $72,800 - $140,600 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * High school diploma or higher degree plus three (3) or more years of related experience * Experience in operating and set up of oscilloscopes and soldering and/or standard electrical engineering measurement and test equipment such as power meters/sensors, and signal/waveform generators * Able to obtain and maintain a DOE Q-level security clearance. Qualifications We Desire * Current Certified LabView developer (LCD) accreditation from National Instruments * Electromagnetic Impulse troubleshooting skills, control circuit theory and design * Experience with network analyzers and spectrum analyzers * Demonstration of at least one LabView controls/data acquisition project (minimum of 100 vi s) from inception to completion to include final documentation. * Demonstrated experience creating, storing and retrieving software from repository systems (i.e. GitHub or Sub-Version). * Experimental RF systems experience (theory/troubleshooting/maintenance). * Strong technical writing skills and the ability to prepare effective documentation. * Ability to work on programs that require adherence to standards and requirements. * Excellent interpersonal and communication skills as well as personal initiative, responsiveness, attention to detail and organization skills to handle multiple tasks and deadlines. * Willingness to tackle problems in a highly collaborative environment. * Ability to meet challenging design requirements and deliver results while meeting timelines within cost, schedule, and performance. * Active DOE Q-Level security clearance. About Our Team The Above Ground Testing (AGT) Accelerator Operations (1332) department is responsible for the operation of the Saturn, HERMES III, and SPHINX pulsed power accelerators. The primary objective of the department is to provide an applied research environment for the study of radiation effects on materials and electronics. The three accelerators generate electrical pulses of up to 20 million Volts and up to 12 million Amperes with nanosecond duration in order to create extremely intense pulsed radiation environments for the study of radiation effects sciences. Department 1332 also conducts pulsed power research and development to: improve radiation source fidelity, increase the output and fluence, as well as to improve the overall reliability and reproducibility of the accelerators. These unique, world class facilities are an essential part of the NNSA s Stockpile Stewardship Program. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Essential Functions If offered the position, you may be required to demonstrate your fitness to perform certain physical aspects of the position, including lifting, carrying, pushing, and pulling. Position Information This Limited Term Employee (LTE) position is a temporary position for one year term, which may be renewed at Sandia's discretion up to a maximum of seven years. Individuals in LTE positions may bid on regular Sandia positions as internal candidates, and in some cases may be converted to regular career positions during their term if warranted by ongoing operational needs, continuing availability of funds, and satisfactory job performance. Apply for Job * Careers * Sign In * New User

About Sandia: Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: + Challenging work with amazing impact that contributes to security, peace, and freedom worldwide + Extraordinary co-workers + Some of the best tools, equipment, and research facilities in the world + Career advancement and enrichment opportunities + Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) + Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* *These benefits vary by job classification. What Your Job Will Be Like: We are seeking a skilled Electromechanical Technologist to join our team. In this role, you will play a crucial part in the design, implementation, and maintenance of data acquisition and control systems. Your expertise will help ensure the reliability and efficiency of our operations, contributing to the overall success of our projects. You will collaborate with cross-functional teams to identify and address technical challenges, fostering a culture of innovation and continuous improvement. On any given day, you may be called on to: + Provide designs, controls, and engineering support for data acquisition and control systems. + Conduct testing and oversight of existing data acquisition and control systems. + Maintain data acquisition and control systems software and hardware. + Implement software data analytics routines into programs for non-technical operators. + Assist with the implementation and commissioning of contractor-supplied software into current and future operations control and data acquisition systems. + Troubleshoot problems and implement workable solutions as required. Due to the nature of the role, this candidate must be able to work onsite. Salary Range: $72,800 - $140,600 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require: + High school diploma or higher degree plus three (3) or more years of related experience + Experience in operating and set up of oscilloscopes and soldering and/or standard electrical engineering measurement and test equipment such as power meters/sensors, and signal/waveform generators + Able to obtain and maintain a DOE Q-level security clearance. Qualifications We Desire: + Current Certified LabView developer (LCD) accreditation from National Instruments + Electromagnetic Impulse troubleshooting skills, control circuit theory and design + Experience with network analyzers and spectrum analyzers + Demonstration of at least one LabView controls/data acquisition project (minimum of 100 vi s) from inception to completion to include final documentation. + Demonstrated experience creating, storing and retrieving software from repository systems (i.e. GitHub or Sub-Version). + Experimental RF systems experience (theory/troubleshooting/maintenance). + Strong technical writing skills and the ability to prepare effective documentation. + Ability to work on programs that require adherence to standards and requirements. + Excellent interpersonal and communication skills as well as personal initiative, responsiveness, attention to detail and organization skills to handle multiple tasks and deadlines. + Willingness to tackle problems in a highly collaborative environment. + Ability to meet challenging design requirements and deliver results while meeting timelines within cost, schedule, and performance. + Active DOE Q-Level security clearance. About Our Team: The Above Ground Testing (AGT) Accelerator Operations (1332) department is responsible for the operation of the Saturn, HERMES III, and SPHINX pulsed power accelerators. The primary objective of the department is to provide an applied research environment for the study of radiation effects on materials and electronics. The three accelerators generate electrical pulses of up to 20 million Volts and up to 12 million Amperes with nanosecond duration in order to create extremely intense pulsed radiation environments for the study of radiation effects sciences. Department 1332 also conducts pulsed power research and development to: improve radiation source fidelity, increase the output and fluence, as well as to improve the overall reliability and reproducibility of the accelerators. These unique, world class facilities are an essential part of the NNSA s Stockpile Stewardship Program. Posting Duration: This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance: Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs: If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Position Information: This Limited Term Employee (LTE) position is a temporary position for one year term, which may be renewed at Sandia's discretion up to a maximum of seven years. Individuals in LTE positions may bid on regular Sandia positions as internal candidates, and in some cases may be converted to regular career positions during their term if warranted by ongoing operational needs, continuing availability of funds, and satisfactory job performance. Essential Functions: If offered the position, you may be required to demonstrate your fitness to perform certain physical aspects of the position, including lifting, carrying, pushing, and pulling. Job ID: 696596 Job Family: RD Regular/Temporary Position: T Full/Part-Time Status: F

About Sandia: Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: + Challenging work with amazing impact that contributes to security, peace, and freedom worldwide + Extraordinary co-workers + Some of the best tools, equipment, and research facilities in the world + Career advancement and enrichment opportunities + Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) + Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* *These benefits vary by job classification. What Your Job Will Be Like: We are seeking a highly skilled and motivated Electromechanical Technologist to join our dynamic team. The successful candidate will be responsible for maintaining and managing a hardware prototyping laboratory, assisting with the operation and maintenance of the 3D printing laboratory, and contributing on multidisciplinary R&D team efforts. Additionally, the candidate will contribute to our overarching mission of developing and implementing technologies to address critical U.S. national security challenges. On any given day, you may be called upon to: + Provide technical support for design and engineering efforts on new capabilities in collaboration with our development teams + Assist other staff as a contributor on some of our most critical projects + Troubleshoot and resolve technical issues on projects and for our organization's mission needs + Work with cross-functional teams to help identify project requirements and develop solutions that meet those needs + Stay up to date with current and emerging best practices to ensure project and mission success Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range: $72,800 - $140,600 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require: + High school diploma plus three or more years of directly related experience, or equivalent combination of education and experience + Demonstrated hands-on experience working with contemporary electromechanical technologies to include any one or more of the following: fabrication, assembly, troubleshooting, CAD/design, basic software skills, and/or advanced manufacturing + Ability to obtain and maintain a DOE Q-level security clearance Qualifications We Desire: + Undergraduate STEM degree + Competency designing and assembling advanced electromechanical technologies + Experience implementing integrated hardware/software solutions + Ability to work on tasking independently + Any form of demonstrated leadership and/or mentorship of others + Experience working in mission-focused environments with access to sensitive and classified information + Ability to work in a fast-paced environment with multiple priorities and tight deadlines + Willingness to travel domestically if/when needed (less than 15% of the time) About Our Team: Organization 06565 Unmanned Systems & Autonomy R&D specializes in robotic automation, autonomous operations of uncrewed systems, advanced controls, miniature mechanical design and fabrication, advanced drive system development, and the human/machine interface. We solve manufacturing (fabrication, inspection, assembly, certification) automation challenges unique to our government sponsors and we advance national security by providing next generation remote systems and automation/autonomy solutions. We have established leadership in this field through capabilities such as active, autonomous perception, distributed control of heterogeneous systems, real-time control of dynamic systems, autonomous manipulation, miniature mechatronic design and fabrication, and advanced human-machine interface R&D. With state-of-the-art facilities, we are using subject matter experience in uncrewed systems R&D to design and deploy systems to address critical national security challenges. The department conducts numerous active research, development, and application projects for a variety of customers, both internal to Sandia and across the national security establishment, collaborating heavily with partners across Sandia. The department is one of six in the Critical Asset Security Group within the Weapon and Force Protection Center, and we readily partner across nearly every mission at Sandia. Posting Duration: This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance: Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs: If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Essential Functions: If offered the position, you may be required to demonstrate your fitness to perform certain physical aspects of the position, including lifting, carrying, pushing, and pulling. Job ID: 696337 Job Family: RD Regular/Temporary Position: R Full/Part-Time Status: F

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like We are seeking a R&D Laboratory Support Technologist to join our dynamic team! Our team conducts maintenance and operations of the Saturn facility and carries the overall responsibility of delivering high-quality pulsed power to experiments in the center of the machine. In this role, you will be supporting the Saturn Operations team, ensuring the smooth functioning of our cutting-edge research environment. On any given day, you may be asked to: * Perform in-tank and topside inspections, configurations, repairs, and maintenance. * Conduct repairs underwater (SCUBA training will be provided). * Tear down and rebuild all components that are used on and in the machine. * Clean parts and maintain cleanliness in the hi-bay and work areas. * Refurbish components for reuse. Due to the nature of the work, this candidate must be able to work onsite. Salary Range $62,400 - $120,400 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * High school diploma * Experience with electrical or mechanical systems * Experience with hand and power tools * Ability to obtain and maintain a DOE Q clearance Qualifications We Desire * Experience with crane operations * Experience with pulsed power * A desire to serve the nation in this advanced research project and the overall mission of Sandia National Laboratories * Ability to model behaviors that reflect Sandia National Laboratories' core values About Our Team The Above Ground Testing (AGT) Accelerator Operations (1332) department is responsible for the operation of the Saturn, HERMES III, and SPHINX pulsed power accelerators. The primary objective of the department is to provide an applied research environment for the study of radiation effects on materials and electronics. The three accelerators generate electrical pulses of up to 20 million Volts and up to 12 million Amperes with nanosecond durations in order to create extremely intense pulsed radiation environments for the study of radiation effects sciences. Department 1332 also conducts pulsed power research and development to: improve radiation source fidelity, increase the output and fluence, as well as to improve the overall reliability and reproducibility of the accelerators. These unique, world class facilities are an essential part of the NNSA's Stockpile Stewardship Program Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Essential Functions If offered the position, you may be required to demonstrate your fitness to perform certain physical aspects of the position, including lifting, carrying, pushing, and pulling. Position Information This Limited Term Employee (LTE) position is a temporary position for one year term, which may be renewed at Sandia's discretion up to a maximum of seven years. Individuals in LTE positions may bid on regular Sandia positions as internal candidates, and in some cases may be converted to regular career positions during their term if warranted by ongoing operational needs, continuing availability of funds, and satisfactory job performance. Apply for Job * Careers * Sign In * New User

About Sandia: Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: + Challenging work with amazing impact that contributes to security, peace, and freedom worldwide + Extraordinary co-workers + Some of the best tools, equipment, and research facilities in the world + Career advancement and enrichment opportunities + Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) + Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* *These benefits vary by job classification. What Your Job Will Be Like: We are seeking a R&D Laboratory Support Technologist to join our dynamic team! Our team conducts maintenance and operations of the Saturn facility and carries the overall responsibility of delivering high-quality pulsed power to experiments in the center of the machine. In this role, you will be supporting the Saturn Operations team, ensuring the smooth functioning of our cutting-edge research environment. On any given day, you may be asked to: + Perform in-tank and topside inspections, configurations, repairs, and maintenance. + Conduct repairs underwater (SCUBA training will be provided). + Tear down and rebuild all components that are used on and in the machine. + Clean parts and maintain cleanliness in the hi-bay and work areas. + Refurbish components for reuse. Due to the nature of the work, this candidate must be able to work onsite. Salary Range: $62,400 - $120,400 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require: + High school diploma + Experience with electrical or mechanical systems + Experience with hand and power tools + Ability to obtain and maintain a DOE Q clearance Qualifications We Desire: + Experience with crane operations + Experience with pulsed power + A desire to serve the nation in this advanced research project and the overall mission of Sandia National Laboratories + Ability to model behaviors that reflect Sandia National Laboratories' core values About Our Team: The Above Ground Testing (AGT) Accelerator Operations (1332) department is responsible for the operation of the Saturn, HERMES III, and SPHINX pulsed power accelerators. The primary objective of the department is to provide an applied research environment for the study of radiation effects on materials and electronics. The three accelerators generate electrical pulses of up to 20 million Volts and up to 12 million Amperes with nanosecond durations in order to create extremely intense pulsed radiation environments for the study of radiation effects sciences. Department 1332 also conducts pulsed power research and development to: improve radiation source fidelity, increase the output and fluence, as well as to improve the overall reliability and reproducibility of the accelerators. These unique, world class facilities are an essential part of the NNSA's Stockpile Stewardship Program Posting Duration: This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance: Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs: If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Essential Functions: If offered the position, you may be required to demonstrate your fitness to perform certain physical aspects of the position, including lifting, carrying, pushing, and pulling. Position Information: This Limited Term Employee (LTE) position is a temporary position for one year term, which may be renewed at Sandia's discretion up to a maximum of seven years. Individuals in LTE positions may bid on regular Sandia positions as internal candidates, and in some cases may be converted to regular career positions during their term if warranted by ongoing operational needs, continuing availability of funds, and satisfactory job performance. Job ID: 696558 Job Family: RD Regular/Temporary Position: T Full/Part-Time Status: F

**What You Will Do** The successful applicant will work as an Engineering Technologist resource for the V-14, Test Engineering group. He/she will work with test engineers, systems engineers, and management to ensure successful preparation and execution of experimental activities. The successful candidate will support component, subsystem, and system testing, including explosive experiment execution. The Engineering Technologist is responsible for supporting the preparation and execution of experimental activities, maintaining, troubleshooting, and repairing facility equipment, setting up instrumentation and data acquisition equipment, and other similar tasks. Specific test environments include but are not limited to shock, vibration, thermal conditioning, blast, and centrifuge testing. Compliance with LANL and facility safety and security practices and delivering accurate test results in a team effort are central to all testing efforts. Additional job responsibilities include participating in the development of new testing technologies and techniques and implementing quality assurance requirements. Performance of job responsibilities will require working in controlled hazardous environments that may include high explosives, radioactive materials, radiation generating devices, and other hazardous materials. Additional job responsibilities include: + Maintaining required safety and security training, assuring safety and security compliance, and making safety and security an integral part of every task. + Use and apply standard principles, theories, concepts and techniques within mechanical discipline to perform work. + Provide resolutions to an assortment of problems of moderately complex scope. + Assist in engineering studies to formulate, determine and evaluate design criteria for structures, systems, and equipment. + Apply basic knowledge of the principles and theories of engineering, mathematics and science to solve routine technical problems. Make simple calculations and perform basic analyses in support of engineering. + Assist in product/system/equipment design, development and/or experimental evaluation processes. + Prepare, review, and document technical information. **What You Need** **Minimum Job Requirements:** + Demonstrate knowledge in planning and executing tests involving components, preferably in shock, vibration, and/or thermal environments. + Experienced with the use of data acquisition systems and associated diagnostics. + Demonstrate ability to accomplish technical tasks while working independently as well as in a team environment. + Demonstrate experience in the testing, maintenance, and troubleshooting of mechanical systems. + Experienced working and delivering products on schedule, while being involved in multiple projects having various and sometimes changing priorities. + Demonstrate written and verbal communication skills. + Demonstrate record of developing constructive, cooperative working relationships and working with teams to meet deliverables. + Proficient in the safe and proper use of hand tools (e.g., torque wrenches, combination wrenches, ratchets, sockets, pliers) for assembly, maintenance, and repair tasks. + Experienced in safely operating a variety of power tools, including drills and impact wrenches, to perform maintenance and assembly tasks. + Comfortable working safely around hazards (e.g., explosives, radiation). + Ability to obtain and maintain a DOE Q clearance. **Education/Experience:** Position requires a Bachelor's Degree in Engineering Technology, Science, Math or related degree from an accredited institution and 2 years related experience; or, an equivalent combination of education and experience directly related to the occupation. **Desired Qualifications:** + Experienced in conducting environmental tests, such as thermal, shock, vibration, and mechanical testing. + Experienced operating electrodynamic shakers, centrifuges and thermal chambers. + Experience working in the vicinity of and handling classified information. + Knowledge of data acquisition and signal conditioning systems to obtain data from various types of instrumentation including accelerometers, strain gages, and thermocouples. + Experience with operations involving innate hazards such as high explosives and radiological material. + Experience developing and implementing maintenance programs for experimental equipment. + Active DOE Q clearance **Work Location:** The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management. **Position commitment:** Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year. **Note to Applicants:** + Domestic travel may be required. + Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: + PPO or High-Deductible medical insurance with the same large nationwide network + Dental and vision insurance + Free basic life and disability insurance + Paid childbirth and parental leave + Award-winning 401(k) (6% matching plus 3.5% annually) + Learning opportunities and tuition assistance + Flexible schedules and time off (PTO and holidays) + Onsite gyms and wellness programs + Extensive relocation packages (outside a 50-mile radius) **Additional Details** **Directive 206.2 -** Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2. Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. **Clearance: Q** Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad. *Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 for additional information. **New-Employment Drug Test:** The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Regular position:** Term status Laboratory employees applying for regular-status positions are converted to regular status. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy P701 (********************************************** for applicant eligibility requirements. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal, state, and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to ****************** or call **************.

**What You Will Do** The Weapons Engineering Directorate at Los Alamos National Laboratory integrates the stockpile stewardship program and weapons engineering and testing in support of the Laboratory's critical mission. Weapons Engineering is looking for summer undergraduate engineering interns in various subdisciplines to join our team and contribute to the future of national security. Our paid internship provides students with an opportunity to gain practical experience under the guidance of a mentor with extensive experience in the field furthering their academic and professional goals. Selected interns will also have access to an array of professional development and networking opportunities provided by the Lab's Student Programs Office (********************************************************************* . Eligible applicants will be added to a candidate pool that hiring managers use to fill internship positions as needed. With one application, eligible candidates will be considered for internships across the Directorate. Learn more about the Directorate, the divisions, and the groups at the Weapons Engineering website (**************************************************** . Selections for this position will not be finalized until approximately March 2026. Examples of internship projects include, but are not limited to: + **Mechanical and Thermal Systems Engineering:** Design, analyze, and test complex mechanical, fluid, and thermal systems, including vacuum, cryogenic, and pressure environments. + **Advanced Manufacturing and Materials Development:** Support additive manufacturing, materials processing, and design optimization using computational and experimental methods. + **Automation, Robotics, and Controls:** Design and program robotic systems, automation platforms, and process control solutions to enhance safety, precision, and efficiency. + **Instrumentation and Data Systems:** Assist in developing electrical hardware, instrumentation, and data acquisition systems for high-precision testing and diagnostics. + **Computational Modeling and Simulation:** Apply numerical and probabilistic methods to model physical phenomena, structural response, and system behavior under varied conditions. + **Experimental Design and Test Execution:** Participate in the design, setup, and operation of experiments and qualification tests to verify system performance and reliability. + **Evaluation and Diagnostics:** Conduct assembly support, non-destructive evaluation, and data analysis to assess component integrity and confirm design intent. + **Systems Engineering and Integration:** Contribute to the design, analysis, and integration of complex systems throughout their lifecycle to ensure safety, reliability, and mission success. + **Digital Engineering and Process Improvement:** Engage in digital design, modeling, and data management initiatives that strengthen collaboration and lifecycle traceability. + **Model-Based Systems Engineering and Emerging Technologies:** Support development of model-based systems engineering approaches and explore innovative tools such as artificial intelligence, automation, and advanced computational methods to enhance future engineering capabilities. \#ALDWRecruiting **What You Need** **Minimum Job Requirements:** + **Enrollment** : Must be currently enrolled in an accredited undergraduate program. + **Credit Hours** : Must be enrolled in at least 12 credit hours during the fall and spring semesters or the quarter system equivalent. + **Cumulative GPA** : Must have and maintain a cumulative GPA of at least a 3.2 on a 4.0 scale. Candidates with a cumulative GPA of 3.4 or higher will be most competitive. **Required Application Materials** : Must submit the following three required documents. Incomplete applications will be deemed ineligible. We strongly recommend reviewing the Application and Interview Tips website (************************************* before applying. 1. **Cover Letter** : Must explicitly reference your interest in the Weapons Engineering Directorate and detail your relevant academic and work experiences, knowledge, skills, and abilities. 2. **Resume** : Must include dates for all related experience. 3. **Current Transcript** : Must include all grades earned up to the time of application and may be unofficial. Entering first-year students must provide documentation indicating matriculation into an accredited undergraduate degree program. **Desired Qualifications:** Candidates will be most competitive when they possess the following knowledge and skills: + **Engineering and Technical Skills:** Foundational knowledge and practical experience in one or more areas such as mechanical or thermal systems, manufacturing, automation and controls, computational modeling, testing, or systems engineering. + **Laboratory Experience:** Demonstrated attention to detail and commitment to safety while conducting hands-on work in laboratory or technical environments. + **Communication Skills:** Proven ability to communicate clearly and effectively, both verbally and in writing, in a professional or technical setting. + **Results Orientation:** Demonstrated initiative and persistence in achieving goals within complex organizational and technical environments. + **Technical Proficiency:** Working knowledge of relevant computer systems, software tools, and data management applications. + **Innovative Thinking:** Ability to apply creativity and problem-solving skills to develop effective, practical solutions to complex challenges. + **Teamwork and Growth Mindset:** Enthusiasm for collaboration, openness to mentorship, and a desire to learn and expand technical and professional capabilities. **Resources for Applicants:** + For assistance or questions related to this job ad, contact Cassandra Casperson at ****************** . + For technical assistance, email ****************** or call ************** option 1. **Work Location:** The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management. **Work Schedule:** The durations of the internship and the work schedule will vary based on the availability of the intern and mentor, and the internship project needs. **Note to Applicants:** Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: § PPO or High Deductible medical insurance with the same large nationwide network § Dental and vision insurance § Free basic life and disability insurance § Paid childbirth and parental leave § Award-winning 401(k) (6% matching plus 3.5% annually) § Learning opportunities and tuition assistance § Flexible schedules and time off (PTO and holidays) § Onsite gyms and wellness programs § Extensive relocation packages (outside a 50 mile radius) **Additional Details** **Directive 206.2** - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2 (******************************************************************** . Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. **Clearance: Q** (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad. *Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 (********************************************************************************************* for additional information. **426.2:** This position is subject to DOE Order 426.2, Personnel Selection, Training, and Qualification Requirements for DOE Nuclear Facilities, which establishes entry-level requirements to ensure candidates selected for specific positions can successfully perform the requirements of the job. **New-Employment Drug Test:** The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy Policy P701 (*********************************************** for applicant eligibility requirements. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal, state, and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to ****************** or call ************** opt. 3. **Instructions on How to Activate/Create a LANL Jobs Account:** Follow the instructions below if you have ever had an employee Z number, been a contractor, or received Los Alamos Lab insurance coverage to **activate** your account: - Select the **Click Here** button if you have **been employed with the Lab or received insurance coverage** . - Please enter only your first and last name and current email address (an email with your validation code will be sent to you) to activate the account currently in our system. - Enter your validation code as described in the email you receive and complete the 3-page registration form. Your account is now active, and you can apply for jobs or save to your basket. **Important** : Enter the validation code **within 15 days** to activate your account or your account will be deactivated Follow the instructions below if you if you have never been employed with the Lab or received insurance coverage to **create** an account: - Select the **Register** button if you have **never been employed with the Lab or received** **insurance coverage** to Create an Account. - From here, you will establish an account with username and password **How to Apply: How to Apply: Login to Your Account to Complete the Application Process** Click the Vacancy Name number (in blue) to view any job's details. - Click Apply or Add to Basket to apply later. **Tip** : To apply for a job or save your basket, you must have a LANL jobs account. If you experience any technical issues, please email ****************** for assistance.

**What You Will Do** **Do something that matters and make a real difference at one of the world's most prestigious and innovative multidisciplinary research institutions. The Engineering Graduate Student (GRA) Program offers paid summer and year-round internships for graduate students in a variety of Engineering sub-disciplines. The program provides mentoring, hands-on technical experience, and professional development opportunities through a formalized work plan complementing the student's chosen area of study. Examples of LANL projects in Engineering include, but are not limited to:** + **Advanced design, analysis and testing of complex systems and structures for national and global security applications;** + **Using X-Ray Computed Tomography to measure density in high explosives;** + **Building, testing, and developing simulations for a table-top electron accelerator that generates RF waves;** + **Design, development, and testing of heat pipes for advanced nuclear reactor concepts;** + **Computational material science modeling of the strength and damage behavior of metals at meso- and continuum scales;** + **Refining algorithms for dynamic path planning for robotic manipulators in industrial settings;** + **Uncertainty quantification and machine learning methods in the graph transport model; Computational Fluid Dynamics (CFD) modeling of flow around structures with vortex induced vibrations for energy security applications;** + **Using machine learning techniques to improve image processing and mechanical response in aerial robots; and Modeling tritium fuel cycling and the impact of liquid metal plasma facing components of fusion energy systems.** **What You Need** Minimum Job Requirements: + Currently enrolled in an accredited engineering graduate degree. Examples of Engineering degrees in greatest demand include: Mechanical, Electrical, Nuclear, Materials, Aeronautic, Chemical, Civil and Environmental. + Must be enrolled in at least 6 semester credit hours (or full-time equivalent) in an accredited degree-granting program (or international equivalent). + Students preparing to begin a graduate program of study must provide documentation indicating matriculation into an appropriate degree program. + Must currently have and maintain a cumulative GPA of at least 3.2 on a 4.0 scale (or equivalent). Desired Qualifications: Students selected for GRA internships are most competitive when they can demonstrate that they possess the following knowledge and skills: + Computer programming in support of engineering design, data acquisition, analysis or machine learning; + Computer Aided Design (CAD) and Finite Element Analysis (FEA) of complex systems; Experience in topological optimization and additive manufacturing; + Fabrication and testing techniques currently used within your selected specific engineering field(s); + Laboratory or shop experience demonstrating attention to detail and commitment to safety; Engineering project management experience; + Demonstrated ability to communicate (verbal and written) well in a professional scientific context; and + Commitment to achieving results in a complex social and organizational setting. Work Location: The work location for this position is onsite in Los Alamos, NM. Note to Applicants: The application and required documents must be submitted by February 13, 2026. When applying, candidates must attach: + A resume, + Personal statement (not to exceed one page), + Their most recent transcripts (or an acceptance letter if transcripts have not been issued). Important: Applicants who fail to submit the three required application documents (resume, personal statement, transcript) will not be considered for employment. Personal statements are most effective when they clearly indicate your research interests and highlight your most notable achievements and accomplishments. It should also explain how you have demonstrated the application of desired knowledge and skills in your previous academic and work experiences. Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China, the Islamic Republic of Iran, the Democratic People's Republic of North Korea, and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. **Where You Will Work** Located in Northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. LANL enhances national security by ensuring the safety and reliability of the U.S. nuclear stockpile, developing technologies to reduce threats from weapons of mass destruction, and solving problems related to energy, environment, infrastructure, health, and global security concerns. Our generous benefits package includes: + PPO or High Deductible medical insurance with the same large nationwide network + Dental and vision insurance + Free basic life and disability insurance + Paid childbirth and parental leave + Award-winning 401(k) (6% matching plus 3.5% annually) + Learning opportunities and tuition assistance + Flexible schedules and time off (PTO and holidays) + Onsite gyms and wellness programs + Extensive relocation packages (outside a 50 mile radius) **Additional Details** Directive 206.2 - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2 (******************************************************************** . Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. No Clearance: Position does not require a security clearance. Selected candidates will be subject to drug testing and other pre-employment background checks. New-Employment Drug Test: The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. Internal Applicants: Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy Policy P701 (*********************************************** for applicant eligibility requirements. Equal Opportunity: Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by applicable federal, state and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request a disability accommodation, email ****************** or call **************, opt. 3. Instructions on How to Activate/Create a LANL Jobs Account: Follow the instructions below if you have ever had an employee Z number, been a contractor, or received Los Alamos Lab insurance coverage to activate your account: + Select the Click Here button if you have been employed with the Lab or received insurance coverage. + Please enter only your first and last name and current email address (an email with your validation code will be sent to you) to activate the account currently in our system. + Enter your validation code as described in the email you receive and complete the 3-page registration form. Your account is now active, and you can apply for jobs or save to your basket. Important: Enter the validation code within 15 days to activate your account or your account will be deactivated. Follow the instructions below if you if you have never been employed with the Lab or received insurance coverage to create an account: + Select the Register button if you have never been employed with the Lab or received insurance coverage to Create an Account. + From here, you will establish an account with username and password. How to Apply: Login to Your Account to Complete the Application Process + Click the Vacancy Name number (in blue) to view any job's details. + Click Apply or Add to Basket to apply later. Tip: To apply for a job or save your basket, you must have a LANL jobs account. If you experience any technical issues, please email ****************** for assistance.

**What You Will Do** **Do something that matters and make a real difference at one of the world's most prestigious and innovative multidisciplinary research institutions. The Engineering Undergraduate Student (UGS) Program offers paid summer and year-round internships for undergraduate students in a variety of disciplines. The program provides mentoring, hands-on technical experience, and professional development opportunities through a formalized work plan complementing the student's chosen area of study. Examples of LANL projects in engineering include, but are not limited to:** + **Advanced design, analysis and testing of complex systems and structures for national and global security applications;** + **Using X-Ray Computed Tomography to measure density in high explosives;** + **Building, testing, and developing simulations for a table-top electron accelerator that generates RF waves;** + **Design, development, and testing of heat pipes for advanced nuclear reactor concepts;** + **Computational material science modeling of the strength and damage behavior of metals at meso- and continuum scales;** + **Refining algorithms for dynamic path planning for robotic manipulators in industrial settings;** + **Uncertainty quantification and machine learning methods in the graph transport model; Computational Fluid Dynamics (CFD) modeling of flow around structures with vortex induced vibrations for energy security applications;** + **Using machine learning techniques to improve image processing and mechanical response in aerial robots; and Modeling tritium fuel cycling and the impact of liquid metal plasma facing components of fusion energy systems.** **What You Need** Minimum Job Requirements: + Currently enrolled in an accredited undergraduate program in any engineering discipline. Examples of Engineering degrees in greatest demand include: Mechanical, Electrical, Nuclear, Materials, Aeronautic, Chemical, Civil and Environmental. + Must be enrolled in at least 12 semester credit hours (or full-time equivalent) in an accredited degree program (or international equivalent). + Entering freshmen must provide documentation indicating matriculation into a suitable undergraduate degree program. + Must currently have and maintain a cumulative GPA of at least 2.75 on a 4.0 scale (or equivalent). Desired Qualifications: Student selected for UGS internships are most competitive when they possess the following knowledge and skills: + Computer programming in support of engineering design, data acquisition, analysis or machine learning; + Fabrication and testing techniques currently used within your selected specific engineering field(s); + Computer Aided Design (CAD) and Finite Element Analysis (FEA) experience; + Experience in additive manufacturing; + Laboratory or shop experience demonstrating attention to detail and commitment to safety; + Demonstrated ability to communicate (verbal and written) well in a professional scientific context; and + Commitment to achieving results in a complex social and organizational setting. Work Location: The work location for this position is onsite at Los Alamos, NM, Note to Applicants: The application and required documents must be submitted by February 13, 2026. When applying, candidates must attach: + A resume, + Personal statement (not to exceed one page), + Their most recent transcripts (or an acceptance letter if transcripts have not been issued). Important: Applicants who fail to submit the three required application documents (resume, personal statement, transcript) will not be considered for employment. Personal statements are most effective when they clearly indicate your research interests and highlight your most notable achievements and accomplishments. It should also explain how you have demonstrated the application of desired knowledge and skills in your previous academic and work experiences. Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China, the Islamic Republic of Iran, the Democratic People's Republic of North Korea, and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. **Where You Will Work** Located in Northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. LANL enhances national security by ensuring the safety and reliability of the U.S. nuclear stockpile, developing technologies to reduce threats from weapons of mass destruction, and solving problems related to energy, environment, infrastructure, health, and global security concerns. Our generous benefits package includes: + PPO or High Deductible medical insurance with the same large nationwide network + Dental and vision insurance + Free basic life and disability insurance + Paid childbirth and parental leave + Award-winning 401(k) (6% matching plus 3.5% annually) + Learning opportunities and tuition assistance + Flexible schedules and time off (PTO and holidays) + Onsite gyms and wellness programs + Extensive relocation packages (outside a 50 mile radius) **Additional Details** Directive 206.2 - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2 (******************************************************************** . Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. No Clearance: Position does not require a security clearance. Selected candidates will be subject to drug testing and other pre-employment background checks. New-Employment Drug Test: The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. Internal Applicants: Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy Policy P701 (*********************************************** for applicant eligibility requirements. Equal Opportunity: Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by applicable federal, state and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request a disability accommodation, email ****************** or call **************, opt. 3. Instructions on How to Activate/Create a LANL Jobs Account: Follow the instructions below if you have ever had an employee Z number, been a contractor, or received Los Alamos Lab insurance coverage to activate your account: + Select the Click Here button if you have been employed with the Lab or received insurance coverage. + Please enter only your first and last name and current email address (an email with your validation code will be sent to you) to activate the account currently in our system. + Enter your validation code as described in the email you receive and complete the 3-page registration form. Your account is now active, and you can apply for jobs or save to your basket. Important: Enter the validation code within 15 days to activate your account or your account will be deactivated. Follow the instructions below if you if you have never been employed with the Lab or received insurance coverage to create an account: + Select the Register button if you have never been employed with the Lab or received insurance coverage to Create an Account. + From here, you will establish an account with username and password. How to Apply: Login to Your Account to Complete the Application Process + Click the Vacancy Name number (in blue) to view any job's details. + Click Apply or Add to Basket to apply later. Tip: To apply for a job or save your basket, you must have a LANL jobs account. If you experience any technical issues, please email ****************** for assistance.