Project Engineer jobs at Los Alamos National Laboratory

**What You Will Do** This position will be filled at either the Nuclear Facilities Engineer 1/2 level, depending on the skills of the selected candidate. Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level. **Nuclear Facilities Engineer 1 ($94,500 - $154,600)** Within this job, successful candidates will have to opportunity to support the Laboratory's mission by serving as the subject matter expert for nuclear facility electrical, mechanical, and structural engineering matters, including all aspects of electrical safety, HVAC, power quality, fluid/utility systems, power monitoring, critical power reliability/redundancy issues, renovating rooms, modifying buildings and structural members, and developing new structures within and around the plutonium facility. Often in this role, engineers may perform engineering studies including short circuit, device coordination, equipment sizing, exterior lighting, fault current, arc flash for both medium and low voltage equipment, demolition, installation, upgrades, and repairs. Within this role, engineers will become familiar with pressure safety, leak testing requirements, piping supports, flow requirements, installing equipment on housekeeping pads or skids with the use of post-installed anchors, design cranes and crane girders/support structures, canopies, equipment support stands, piping/conduit supports, wall/floor/ceiling penetrations, and concrete slabs. **Nuclear Facilities Engineer 2 ($104,100 -$172,200)** In addition to the description above, engineers in this position will work alongside junior and senior engineers (e.g., fire protection, structural, mechanical, and electrical) and other peers in team settings to complete collaborative full-system design solutions through mentoring and leadership. **What You Need** **Minimum Job Requirements:** + Develops broad and/or unique knowledge with major commercial, industrial, or nuclear facility with a strong background in facility related systems (i.e. HVAC, Compressed Air). + Fundamental knowledge of design, operation, and maintenance of facility related mechanical systems. + Knowledge of trouble shooting mechanical systems. + Awareness of and demonstrated experience in application of codes and standards in a highly regulated work environment, to include but not limited to the IBC, IEBC, ASHRE, B31. + Demonstrated ability to perform analysis and calculations required to support engineered solutions. + Ability to effectively communicate engineering solutions both verbally and written with management, customers, peers, and maintenance personnel. **Increased knowledge and experience of the above in addition to the following are Requirements for Nuclear Facilities Engineer 2:** + Knowledge of and demonstrated ability to prepare and review technical reports and studies as part of establishing and maintaining Technical Baseline for new and existing facility structural systems. + Knowledge of and demonstrated ability to define and collect the usage, process, safety, and other requirements for the structure, system, or component design or analysis tasks, and prepare design concepts that meet the requirements. + Knowledge of and demonstrated ability to develop design details, design or analysis calculations, load studies, specifications, and special inspections that incorporate the applicable design requirements, including nuclear safety requirements, as applicable. + Knowledge and demonstrated experience evaluating and trending system health. + Demonstrated ability to interface and coordinate with other engineering disciplines and the customer during the development of the design as the Mechanical SME. + Demonstrated ability to mentor engineering interns and other engineers. **Education/Experience at lower level:** Position requires a Bachelor's Degree in Engineering from an ABET-accredited college or university and 2 years of practical work experience necessary to perform the responsibilities outlined above. Advanced engineering or technical degree is highly desired. **Education/Experience at higher level:** Position requires a Bachelor's Degree in Engineering from an ABET-accredited college or university and a minimum of 3 years of practical work experience necessary to perform the responsibilities outlined above. Advanced engineering or technical degree is highly desired. **Desired Qualifications:** + Experience with chilled water systems. + Experience with mechanical system computational software for mechanical systems (i.e., AFT Fathom/Arrow, Pipe Flow). + Experience with nuclear air handling system requirements. + Experience with mechanical system computational software for mechanical systems (i.e., Train Trace, Pipe Flow). + Experience as a mechanical engineer at a DOE non-reactor nuclear facility with a strong background in facility related mechanical systems (i.e. HVAC, Compressed Air). + Experience with the application of DOE Orders and Standards as related to facility systems. + Experience working within an ASME NQA-1 or similar quality program. **Essential Job Functions** (can perform with or without reasonable accommodation): General Physical Mobility, standing, walking, climbing stairs, bending. Specific Physical Mobility use of both hands, use of both arms, use of both legs, use of both feet, carry/lift up to 20 pounds. **Work Environment:** Work in a noisy environment, work near sources of ionizing and non-ionizing radiation, work near machinery with moving parts, working overtime or an irregular schedule. **Work Location:** This position will be physically located in Los Alamos, NM. All work locations are at the discretion of management. **Work Schedule:** This position may require 24/7 coverage, which could will involve working a shift/weekend schedule. Employees may be eligible for shift differential pay when assigned by their manager. Shift/weekend assignments are at the discretion of the manager. **Position commitment:** Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year. **Note to Applicants:** This position will be on-site work location in Los Alamos, NM. Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: + PPO or High Deductible medical insurance with the same large nationwide network + Dental and vision insurance + Free basic life and disability insurance + Paid childbirth and parental leave + Award-winning 401(k) (6% matching plus 3.5% annually) + Learning opportunities and tuition assistance + Flexible schedules and time off (PTO and holidays) + Onsite gyms and wellness programs + Extensive relocation packages (outside a 50 mile radius) **Additional Details** **Directive 206.2** - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2. Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. **Clearance: Q** (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad. *Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 for additional information. **HRP:** This position is subject to the requirements of the DOE Human Reliability Program as specified in 10 Code of Federal Regulation, Part 712, §712.11. These requirements include on going drug and alcohol testing, as well as periodic medical and psychological evaluations. **New-Employment Drug Test:** The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Regular position:** Term status Laboratory employees applying for regular-status positions are converted to regular status. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy Policy P701 for applicant eligibility requirements. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by applicable federal, state and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request a disability accommodation, email ****************** or call **************, opt. 3.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. Information Systems and Cyber Division (ISCD) staff couple the latest in information system technologies, such as elastic compute clouds, containerization, microservices, real-time operating systems, and visualization frameworks, with expertise in cyber security, software architecture, software engineering, data science, Artificial Intelligence, process improvement, and software development to deliver responsive, resilient, high-performance software intensive systems to our IC, DoD, and civilian customers. Aerospace's Cyber Security and Advanced Platforms Subdivision, Advanced Cryptographic Capabilities Department is seeking a Communication/System Security/Crypto Engineer to help design, implement, assess and deploy data-in-transit solutions that defend our nation's most valuable assets in space. We are seeking a highly motivated Communication/System Security/Crypto Project Engineer | Senior Project Engineer with a desire to support customers across a full spectrum of system security, crypto, and communications system activities. This is a full-time position based in Albuquerque and Kirtland AFB, New Mexico, which is 100%onsite. What You'll Be Doing Provide direct engineering support primarily to the Space Rapid Capabilities Office. Additional support may occasionally be requested for Space Systems Command, Air Force Research Lab and Space Development Agency customers. Advise government customers and their program contractors on cryptographic capability design and implementation. Perform research and technical assessments in areas of cryptography, network security, cybersecurity, communications integration. Review and develop technical designs, Concept of Operations (CONOPs), system test plans, technical documentation and provide feedback and guidance in both oral and written form. Develop technical information for ground and space systems to include integration of cryptographic hardware, system security controls, long-haul communications, securing data-in-transit. Communicate with multiple government agencies, contractors, and vendors to develop new cryptographic, system security, and communications technologies . Author and/or co-author technical engineering documents in relation cryptography, network security and system security. What You Need to be Successful Minimum Requirements for the Project Engineer - Secure Enterprise Crypto Architect role Bachelors degree in Information Technology, Information Systems, Computer Science, Cybersecurity or similar STEM technical area of study 8 years of experience in cryptographic technologies is desired for the support for SpRCO Demonstrated ability to communicate and have effective collaboration in a cross functional, matrix environment to support multiple local and remote customer locations within multiple programs Proven experience in network engineering, network architecture, long-haul communications knowledge and experience Expertise in developing and presenting technical reports, concept documents (CONOPs), briefings and analytical assessment for different audiences. Willing to travel domestically up to 25% of the time This position requires a current TS/SCI security clearance with SAP eligibility, which is issued by the US Government. U.S. citizenship is required to obtain a security clearance In addition to the above, the minimum requirements for the Senior Project Engineer - Secure Enterprise Crypto Architect role : A minimum of 12 years engineering experience in in Information Technology, Cybersecurity, or Network Engineering Working knowledge of multiple types of Proven ability and expertise in cryptographic technologies, standards, and policies Strong leadership, team management and collaboration abilities. Proficient in Linux and its native programming or scripting languages How You Can Stand Out It would be impressive if you have one or more of these: Advanced degree in Information Technology, Information Systems, Computer Science, Cybersecurity or similar technical area of study Experience with implementing and operating COMSEC items, primarily space-based cryptographic solutions, but also terrestrial cryptographic solutions Experience with space and ground system infrastructure, including design, implementation, and operation of COMSEC hardware, network devices, compute systems Experience with designing or implementing data-in-transit flows and data structures-both space and ground-at all layers of OSI model Experience with configuring Amazon Web Services (AWS) based cloud computing services Proficient in Linux and its native programming or scripting languages Test plan authoring, editing, review, and execution Current TS/SCI with the ability to obtain SAP clearances, which is issued by the US government. US citizenship is required to obtain a security clearance. Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: Operate Strategically Lead Change Engage with Impact Foster Innovation Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: Comprehensive health care and wellness plans Paid holidays, sick time, and vacation Standard and alternate work schedules, including telework options 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire Flexible spending accounts Variable pay program for exceptional contributions Relocation assistance Professional growth and development programs to help advance your career Education assistance programs A work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color, religion, genetic information, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at ************ or by email at ****************************** . You can also review Know Your Rights: Workplace Discrimination is Illegal.

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like The Inertial Systems Department is seeking a Mechanical Engineer with a strong interest and enthusiasm for sensor characterization, mechanical development and integration, aimed at various hardware projects. The ideal candidate will collaborate effectively with the organization's technical specialists in electronics, mechanical engineering, and software development. This role will concentrate on testing, analyzing, and integrating complex inertial sensor systems for diverse applications, from initial subsystem characterization to final delivery for customer use. On any given day, the selected candidate could perform these activities: * Mechanical and Electronic hardware - * Radiation shielding design * Materials characterization * Component Integration * Testing and analysis of accelerometers, gyroscopes, IMUs, inertial subsystems * Software - * MATLAB code development and execution for analysis * Develop software for data acquisition and analysis applications * Finite element analysis * Environments modeling * Documentation * Review datasheets/literature for electronic components and inertial sensors * Develop analysis and presentation material * Track lessons learned content * Teaming - * Interact with technologists and other engineers in pursuit of prototype development and testing * Provide briefings to peers and customers for technical interchange purposes Salary Range $99,400 - $193,600 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * A Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. * The ability to obtain and maintain a DOE Q clearance. Qualifications We Desire The ideal R&D Mechanical Engineering candidate for Sandia National Laboratories will in addition possess the following: * Graduate degree in Mechanical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). * Strong verbal and written communication skills, ability to work effectively in multidisciplinary teams. * Experience with mechanical engineering and product realization in the NNSA complex. Also, for this posting we are seeking individuals with the following experience: * A proven track record of conducting research/development within a team environment from concept to delivery. * Experience with SolidWorks or CREO mechanical design and modeling software tools. * Experience with MATLAB, Ansys modeling and analysis tools. * Familiarity with developing software for test apparatus control, data capture, analysis. * Experience with inertial sensors and magnetometers * Experience with environmental testing and analysis - 3-axis motion, centrifuge, vibration, vacuum, radiation. * Experience with designing environmental test fixtures and shielding for components * Experience with the Sandia National Labs Nuclear Weapon Product Realization Process. * Utilize AI for design expediency. About Our Team Sandia's Department 5326 - Inertial Systems is dedicated to developing and delivering cutting-edge sensor and electronic subsystems for missile systems, air-delivered applications, and ground navigation. Our work involves advancing current design initiatives and creating prototype and surrogate items, all of which undergo rigorous testing and characterization in thermal, vibration, shock, various motion, electromagnetic, and radiation environments. The organization excels in engineering development for the interface, testing, and evaluation of inertial sensors, ensuring their integration into complex electronic and mechanical systems. Our team possesses a diverse range of skills, including expertise in electronics engineering, software design, mechanical modeling and design, and electro-mechanical fabrication. Our product development process encompasses conceptualization, requirements gathering, modeling, detailed design, fabrication, system integration, testing, and data analysis, all aimed at delivering reliable solutions to our various customers. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

About Sandia: Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: + Challenging work with amazing impact that contributes to security, peace, and freedom worldwide + Extraordinary co-workers + Some of the best tools, equipment, and research facilities in the world + Career advancement and enrichment opportunities + Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) + Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* *These benefits vary by job classification. What Your Job Will Be Like: The Inertial Systems Department is seeking a Mechanical Engineer with a strong interest and enthusiasm for sensor characterization, mechanical development and integration, aimed at various hardware projects. The ideal candidate will collaborate effectively with the organization's technical specialists in electronics, mechanical engineering, and software development. This role will concentrate on testing, analyzing, and integrating complex inertial sensor systems for diverse applications, from initial subsystem characterization to final delivery for customer use. On any given day, the selected candidate could perform these activities: + Mechanical and Electronic hardware - + Radiation shielding design + Materials characterization + Component Integration + Testing and analysis of accelerometers, gyroscopes, IMUs, inertial subsystems + Software - + MATLAB code development and execution for analysis + Develop software for data acquisition and analysis applications + Finite element analysis + Environments modeling + Documentation + Review datasheets/literature for electronic components and inertial sensors + Develop analysis and presentation material + Track lessons learned content + Teaming - + Interact with technologists and other engineers in pursuit of prototype development and testing + Provide briefings to peers and customers for technical interchange purposes Salary Range: $99,400 - $193,600 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require: + A Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. + The ability to obtain and maintain a DOE Q clearance. Qualifications We Desire: The ideal R&D Mechanical Engineering candidate for Sandia National Laboratories will in addition possess the following: + Graduate degree in Mechanical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). + Strong verbal and written communication skills, ability to work effectively in multidisciplinary teams. + Experience with mechanical engineering and product realization in the NNSA complex. Also, for this posting we are seeking individuals with the following experience: + A proven track record of conducting research/development within a team environment from concept to delivery. + Ex perience with SolidWorks or CREO mechanical design and modeling software tools. + Experience with MATLAB, Ansys modeling and analysis tools. + Familiarity with developing software for test apparatus control, data capture, analysis. + Experience with inertial sensors and magnetometers + Experience with environmental testing and analysis - 3-axis motion, centrifuge, vibration, vacuum, radiation. + Experience with designing environmental test fixtures and shielding for components + Experience with the Sandia National Labs Nuclear Weapon Product Realization Process. + Utilize AI for design expediency. About Our Team: Sandia's Department 5326 - Inertial Systems is dedicated to developing and delivering cutting-edge sensor and electronic subsystems for missile systems, air-delivered applications, and ground navigation. Our work involves advancing current design initiatives and creating prototype and surrogate items, all of which undergo rigorous testing and characterization in thermal, vibration, shock, various motion, electromagnetic, and radiation environments. The organization excels in engineering development for the interface, testing, and evaluation of inertial sensors, ensuring their integration into complex electronic and mechanical systems. Our team possesses a diverse range of skills, including expertise in electronics engineering, software design, mechanical modeling and design, and electro-mechanical fabrication. Our product development process encompasses conceptualization, requirements gathering, modeling, detailed design, fabrication, system integration, testing, and data analysis, all aimed at delivering reliable solutions to our various customers. Posting Duration: This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance: Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs: If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Job ID: 696338 Job Family: RD Regular/Temporary Position: R Full/Part-Time Status: F

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like Join us in shaping the future of national security! We are seeking a dynamic and experienced Facilities Engineering Project Manager to become an integral part of our Capital Acquisition Project Management Organization. In this pivotal role, you will lead the charge on the Combined Radiation Environments for Survivability Testing (CREST) line-item project, a cornerstone Major System acquisition aligned with Department of Energy Order (DOE O) 413.3B. Your contributions on the CREST project will play a crucial role in supporting the current and future mission needs of the National Nuclear Security Administration (NNSA). In this exciting position, you will collaborate with a diverse and skilled project team, including NNSA/Program Customers, Contractors, Technical Partners, Mission Enabling Partners, and Facilities Management. Together, you will drive the successful execution of this critical infrastructure project, ensuring it is completed on time, within scope, budget, and quality standards. This is more than just a job; it's an opportunity to make a meaningful impact on our nation's security and infrastructure. Join us and be part of a mission that truly matters! On any given day, you may be called on to: * Identify, develop, and lead a team to deliver a major system acquisition scale project with a total project cost exceeding $750M. * Develop project plans, schedules, and milestones and all required documents associated within the DOE order 413.3B Critical Decision (CD) process. * Partner with the Federal Project Director (FPD) and the Federal Program Manager (FPM) assigned by NNSA. * Implement standard project management practices including project planning, scope management, scheduling, cost estimation, quality assurance, staffing, communications, risk management, EVM, and procurement. * Apply extensive knowledge of key nuclear facility design and safety standards, including NRC regulations, ASME and ANSI/ANS standards, IAEA Safety Standards, DOE Orders and invoked Standards, NEI guidelines, NQA-1 Standards, ISO standards, NFPA standards, ACI standards, and IEEE standards. * Apply knowledge of nuclear facility operational challenges, risks, and issues to inform and enhance the design and construction processes of new nuclear facilities, ensuring safety, compliance, and operational efficiency * Partner with Control Account Managers, Project Managers, Project Controllers, Schedulers, and Cost Analysts. * Work directly with Design and Construction Suppliers, administer Architecture & Engineering (A&E) contracts, and coordinate design and construction activities. Understand technical tasks sufficiently to identify time requirements and task dependencies. * Understand transition to operations requirements for nuclear facilities and coordinate development of transition to operations plans in concert with other parallel activities. * Support management of technical resources within budget and project schedule. * Lead project management quality control, contract compliance, and contract interpretation efforts. * Coordinate with Customers and Facilities Management on scope, cost, schedule, quality and change requests for all assigned projects. * Prioritize and manage numerous tasks effectively. * Ensure compliance with Corporate and Facilities requirements and be accountable for Environmental Safety & Health (ES&H) planning. * Identify, prepare and coordinate change orders and implement change control processes where necessary. * Apply risk assessment and management/mitigation strategies specific to nuclear projects, including identifying, analyzing, and mitigating risks throughout the project lifecycle in accordance with corporate policies and practices. * Prepare the project team and represent NTESS during Independent Project Reviews (IPRs), Independent Cost Estimates (ICEs), Annual Project Reviews (APRs), and External Independent Reviews (EIRs). Travel as required for project needs. This position does not have any direct reports. Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range $157,100 - $267,000 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * Bachelor's degree in Engineering (Nuclear, Civil, Mechanical, or related), Architecture, Construction Management or Project Management or other technical field related to Facilities Management plus fifteen (15) or more years of relevant experience in project or program management; or equivalent combination of education and relevant experience that demonstrates the knowledge, skills and ability to perform the duties of the job. * Minimum of eight (8) or more years in the nuclear industry or related field. * Experience in the following: * Managing large scale nuclear facility projects ($750M or more). * Delivering nuclear facilities and/or nuclear infrastructure. * Engineering principles and construction practices relevant to nuclear facility design and construction. * Construction practices, nuclear safety protocols, and relevant regulations. * Execution of DOE Order 413.3B. * Integrated Master Schedules, EVM Systems, and Baseline Change Control (BCC) systems and procedures. * Ability to obtain and maintain a DOE Q-level security clearance. Qualifications We Desire * Master's degree in Engineering, Architecture, Construction Management or Project Management. * Project Management Professional (PMP) certification or other Project Management Certifications. * Relevant nuclear industry certification (e.g., Certified Nuclear Engineer). * Experience with Earned Value Management (EVM), project scheduling and risk management. * Contract development (including negotiations) and monitoring experience. * Proficient in tools and applications commonly employed in project management activities, including working knowledge with Primavera (P6) and familiarity with Cobra. * Experience with standard project management practices. * Excellent verbal and written communication skills to effectively convey complex information to executive leadership and stakeholders, including technical and non-technical audiences. * Experience negotiating and resolving issues across NNSA to meeting national long terms objectives. * Demonstrated effective decision-making authority for line item projects related to cost, schedule, risk, and performance. * Capacity to adapt to changing project conditions, regulatory environments, and stakeholder needs. * Experience and knowledge in safety related programs including OSHA 1926, and 10 CFR 851. * Familiarity with safety analysis, hazard assessments, and the development of safety bases for nuclear facilities, including knowledge of applicable nuclear facility design standards (including ASME, ANSI and other relevant codes). * Understanding of regulatory frameworks governing nuclear facilities, including NRC regulations and environmental standards. About Our Team Group 4130 (CapAx Portfolio Management) is responsible to deliver capital acquisition projects through integration with Mission Partners. The integrated project team delivers line item scale projects within cost and budget while ensuring that the projects are executed safely and securely. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

About Sandia: Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: + Challenging work with amazing impact that contributes to security, peace, and freedom worldwide + Extraordinary co-workers + Some of the best tools, equipment, and research facilities in the world + Career advancement and enrichment opportunities + Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) + Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* *These benefits vary by job classification. What Your Job Will Be Like: Join us in shaping the future of national security! We are seeking a dynamic and experienced Facilities Engineering Project Manager to become an integral part of our Capital Acquisition Project Management Organization. In this pivotal role, you will lead the charge on the Combined Radiation Environments for Survivability Testing (CREST) line-item project, a cornerstone Major System acquisition aligned with Department of Energy Order (DOE O) 413.3B. Your contributions on the CREST project will play a crucial role in supporting the current and future mission needs of the National Nuclear Security Administration (NNSA). In this exciting position, you will collaborate with a diverse and skilled project team, including NNSA/Program Customers, Contractors, Technical Partners, Mission Enabling Partners, and Facilities Management. Together, you will drive the successful execution of this critical infrastructure project, ensuring it is completed on time, within scope, budget, and quality standards. This is more than just a job; it's an opportunity to make a meaningful impact on our nation's security and infrastructure. Join us and be part of a mission that truly matters! On any given day, you may be called on to: + Identify, develop, and lead a team to deliver a major system acquisition scale project with a total project cost exceeding $750M. + Develop project plans, schedules, and milestones and all required documents associated within the DOE order 413.3B Critical Decision (CD) process. + Partner with the Federal Project Director (FPD) and the Federal Program Manager (FPM) assigned by NNSA. + Implement standard project management practices including project planning, scope management, scheduling, cost estimation, quality assurance, staffing, communications, risk management, EVM, and procurement. + Apply extensive knowledge of key nuclear facility design and safety standards, including NRC regulations, ASME and ANSI/ANS standards, IAEA Safety Standards, DOE Orders and invoked Standards, NEI guidelines, NQA-1 Standards, ISO standards, NFPA standards, ACI standards, and IEEE standards. + Apply knowledge of nuclear facility operational challenges, risks, and issues to inform and enhance the design and construction processes of new nuclear facilities, ensuring safety, compliance, and operational efficiency + Partner with Control Account Managers, Project Managers, Project Controllers, Schedulers, and Cost Analysts. + Work directly with Design and Construction Suppliers, administer Architecture & Engineering (A&E) contracts, and coordinate design and construction activities. Understand technical tasks sufficiently to identify time requirements and task dependencies. + Understand transition to operations requirements for nuclear facilities and coordinate development of transition to operations plans in concert with other parallel activities. + Support management of technical resources within budget and project schedule. + Lead project management quality control, contract compliance, and contract interpretation efforts. + Coordinate with Customers and Facilities Management on scope, cost, schedule, quality and change requests for all assigned projects. + Prioritize and manage numerous tasks effectively. + Ensure compliance with Corporate and Facilities requirements and be accountable for Environmental Safety & Health (ES&H) planning. + Identify, prepare and coordinate change orders and implement change control processes where necessary. + Apply risk assessment and management/mitigation strategies specific to nuclear projects, including identifying, analyzing, and mitigating risks throughout the project lifecycle in accordance with corporate policies and practices. + Prepare the project team and represent NTESS during Independent Project Reviews (IPRs), Independent Cost Estimates (ICEs), Annual Project Reviews (APRs), and External Independent Reviews (EIRs). Travel as required for project needs. This position does not have any direct reports. Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range: $157,100 - $267,000 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require: + Bachelor's degree in Engineering (Nuclear, Civil, Mechanical, or related), Architecture, Construction Management or Project Management or other technical field related to Facilities Management plus fifteen (15) or more years of relevant experience in project or program management; or equivalent combination of education and relevant experience that demonstrates the knowledge, skills and ability to perform the duties of the job. + Minimum of eight (8) or more years in the nuclear industry or related field. + Experience in the following: + Managing large scale nuclear facility projects ($750M or more). + Delivering nuclear facilities and/or nuclear infrastructure. + Engineering principles and construction practices relevant to nuclear facility design and construction. + Construction practices, nuclear safety protocols, and relevant regulations. + Execution of DOE Order 413.3B. + Integrated Master Schedules, EVM Systems, and Baseline Change Control (BCC) systems and procedures. + Ability to obtain and maintain a DOE Q-level security clearance. Qualifications We Desire: + Master's degree in Engineering, Architecture, Construction Management or Project Management. + Project Management Professional (PMP) certification or other Project Management Certifications. + Relevant nuclear industry certification (e.g., Certified Nuclear Engineer). + Experience with Earned Value Management (EVM), project scheduling and risk management. + Contract development (including negotiations) and monitoring experience. + Proficient in tools and applications commonly employed in project management activities, including working knowledge with Primavera (P6) and familiarity with Cobra. + Experience with standard project management practices. + Excellent verbal and written communication skills to effectively convey complex information to executive leadership and stakeholders, including technical and non-technical audiences. + Experience negotiating and resolving issues across NNSA to meeting national long terms objectives. + Demonstrated effective decision-making authority for line item projects related to cost, schedule, risk, and performance. + Capacity to adapt to changing project conditions, regulatory environments, and stakeholder needs. + Experience and knowledge in safety related programs including OSHA 1926, and 10 CFR 851. + Familiarity with safety analysis, hazard assessments, and the development of safety bases for nuclear facilities, including knowledge of applicable nuclear facility design standards (including ASME, ANSI and other relevant codes). + Understanding of regulatory frameworks governing nuclear facilities, including NRC regulations and environmental standards. About Our Team: Group 4130 (CapAx Portfolio Management) is responsible to deliver capital acquisition projects through integration with Mission Partners. The integrated project team delivers line item scale projects within cost and budget while ensuring that the projects are executed safely and securely. Posting Duration: This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance: Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs: If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Job ID: 696381 Job Family: FA Regular/Temporary Position: R Full/Part-Time Status: F

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. Information Systems and Cyber Division (ISCD) staff couple the latest in information system technologies, such as elastic compute clouds, containerization, microservices, real-time operating systems, and visualization frameworks, with expertise in cyber security, software architecture, software engineering, data science, Artificial Intelligence, process improvement, and software development to deliver responsive, resilient, high-performance software intensive systems to our IC, DoD, and civilian customers. Aerospace's Cyber Security and Advanced Platforms Subdivision, Advanced Cryptographic Capabilities Department is seeking a Communication/System Security/Crypto Engineer to help design, implement, assess and deploy data-in-transit solutions that defend our nation's most valuable assets in space. We are seeking a highly motivated Communication/System Security/Crypto Project Engineer | Senior Project Engineer with a desire to support customers across a full spectrum of system security, crypto, and communications system activities. This is a full-time position based in Albuquerque and Kirtland AFB, New Mexico, which is 100%onsite. What You'll Be Doing * Provide direct engineering support primarily to the Space Rapid Capabilities Office. Additional support may occasionally be requested for Space Systems Command, Air Force Research Lab and Space Development Agency customers. * Advise government customers and their program contractors on cryptographic capability design and implementation. * Perform research and technical assessments in areas of cryptography, network security, cybersecurity, communications integration. * Review and develop technical designs, Concept of Operations (CONOPs), system test plans, technical documentation and provide feedback and guidance in both oral and written form. * Develop technical information for ground and space systems to include integration of cryptographic hardware, system security controls, long-haul communications, securing data-in-transit. * Communicate with multiple government agencies, contractors, and vendors to develop new cryptographic, system security, and communications technologies . * Author and/or co-author technical engineering documents in relation cryptography, network security and system security. What You Need to be Successful Minimum Requirements for the Project Engineer - Secure Enterprise Crypto Architect role * Bachelors degree in Information Technology, Information Systems, Computer Science, Cybersecurity or similar STEM technical area of study * 8 years of experience in cryptographic technologies is desired for the support for SpRCO * Demonstrated ability to communicate and have effective collaboration in a cross functional, matrix environment to support multiple local and remote customer locations within multiple programs * Proven experience in network engineering, network architecture, long-haul communications knowledge and experience * Expertise in developing and presenting technical reports, concept documents (CONOPs), briefings and analytical assessment for different audiences. * Willing to travel domestically up to 25% of the time * This position requires a current TS/SCI security clearance with SAP eligibility, which is issued by the US Government. U.S. citizenship is required to obtain a security clearance In addition to the above, the minimum requirements for the Senior Project Engineer - Secure Enterprise Crypto Architect role: * A minimum of 12 years engineering experience in in Information Technology, Cybersecurity, or Network Engineering * Working knowledge of multiple types of Proven ability and expertise in cryptographic technologies, standards, and policies * Strong leadership, team management and collaboration abilities. * Proficient in Linux and its native programming or scripting languages How You Can Stand Out It would be impressive if you have one or more of these: * Advanced degree in Information Technology, Information Systems, Computer Science, Cybersecurity or similar technical area of study * Experience with implementing and operating COMSEC items, primarily space-based cryptographic solutions, but also terrestrial cryptographic solutions * Experience with space and ground system infrastructure, including design, implementation, and operation of COMSEC hardware, network devices, compute systems * Experience with designing or implementing data-in-transit flows and data structures-both space and ground-at all layers of OSI model * Experience with configuring Amazon Web Services (AWS) based cloud computing services * Proficient in Linux and its native programming or scripting languages * Test plan authoring, editing, review, and execution * Current TS/SCI with the ability to obtain SAP clearances, which is issued by the US government. US citizenship is required to obtain a security clearance. Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: * Operate Strategically * Lead Change * Engage with Impact * Foster Innovation * Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * A work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color, religion, genetic information, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at ************ or by email at ****************************** . You can also review Know Your Rights: Workplace Discrimination is Illegal.

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like Are you looking for an opportunity to contribute to a highly motivated team focused on delivering qualified electronic components for a national security mission? The Advanced RF Integrated Circuits (ICs) and Microsystems Department (5255) is seeking an experienced IC designer who is knowledgeable in modern RF, analog, and digital design techniques, as well as IC fabrication, testing, qualification, and the delivery of custom-designed systems on a chip. The selected candidate will assume a leadership role within a team that interfaces with technology developers and application customers to improve system performance through new understanding and integration across a broad range of technologies, including subthreshold RF, analog and mixed-signal components (semiconductor and piezoelectric) for radar, communication, IoT, solid-state electronic devices, high-speed interconnects and integration, and devices that exploit new nanoscale materials and physics. * Lead IC designs within our internal radiation-hardened technologies as well as modern external foundries * Plans, conducts, and executes Sandia's science and engineering programs within the spectrum of fundamental research, development, or demonstration * Play a key technical role in developing new ideas and proposals for research activities including junior staff * Communicate results and findings to peers and sponsors through presentation, and peer reviewed publications * Review/Write specifications for RF components used in radar systems * Identify, develop, and pursue new technology opportunities in areas that support Sandia mission activities The selected applicant can be a remote worker located in any U.S. State or District of Columbia. Regular or periodic travel to your assigned work location may be required. Salary Range $157,100 - $267,000 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * Master's in Electrical Engineering plus eight years or more years' relevant experience * RF or high-speed integrated circuit design using Cadence Virtuoso * Experience in radio frequency design including electromagnet modeling and analysis, frequency analysis, noise analysis, power matching analysis, radiation hardening by design and/or link budget analysis * Ability to obtain and maintain a DOE Q-level security clearance Qualifications We Desire * PhD in Electrical Engineering plus five (5) years' of relevant experience or proven experience designing LNA, mixer, power amplifiers, RF and analog filters, high speed analog, and PLL blocks * Strong written and presentation skills to provide sponsors and vendors convincing evidence of quality designs * Ability to work independently and within a multi-disciplinary team of peers to meet specifications * Strong interpersonal skills which include teamwork, effective leadership, negotiation, delegation, and conflict resolution * Understanding of: * fabrication process for integrated circuits * die attaching, wirebonding, and packaging * advanced automated assembly processes for die and very small SMT components * Experience: * developing complex microsystem solutions including analog, digital, RF, and other technologies * modeling electromagnetic effects on and off die * heterogeneously integrating die onto various dielectric interposers or PCBs to maintain signal integrity and improve throughput * Interest in enabling next-generation advances in quantum information, ultra-low-power RF microsystems, electromagnetic interference mitigation, and high-speed heterogeneous integration. * Demonstrated oral, written, and technical writing skills to provide sponsors and vendors convincing evidence of quality designs * Experience with/in: Analog and RF modeling using commercially available simulation tools in semiconductor, electromagnetic, and/or optical Integrated circuit design using Cadence, Mentor Graphics, Synopsis, ADS, HFSS, EMX * Multiple peer reviewed published papers in the field of integrated circuit design * Active DOE Q or DOD TS security clearance About Our Team The RF ICs and Microsystems department performs research, design, modeling, characterization, and qualification of RF microelectronics. We have a focus on efficient, high performance RF component design, electromagnetic modeling, as well as novel wireless sensor development. We have capabilities for developing between prototypes to fully qualified hardware. We provide unique solutions to our customers in nuclear weapons, DoD, non-proliferation agencies, and subsystem departments (SAR, surety, & ISR). Our research interests include advanced RF sensors, low power communication devices, quantum computing electromagnetics, advanced radar component design, and next generation resonators for clocks unique to national security applications. Join this team to make a difference for our nation and work toward your individual goals. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

About Sandia: Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: + Challenging work with amazing impact that contributes to security, peace, and freedom worldwide + Extraordinary co-workers + Some of the best tools, equipment, and research facilities in the world + Career advancement and enrichment opportunities + Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) + Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* *These benefits vary by job classification. What Your Job Will Be Like: Are you looking for an opportunity to contribute to a highly motivated team focused on delivering qualified electronic components for a national security mission? The Advanced RF Integrated Circuits (ICs) and Microsystems Department (5255) is seeking an experienced IC designer who is knowledgeable in modern RF, analog, and digital design techniques, as well as IC fabrication, testing, qualification, and the delivery of custom-designed systems on a chip. The selected candidate will assume a leadership role within a team that interfaces with technology developers and application customers to improve system performance through new understanding and integration across a broad range of technologies, including subthreshold RF, analog and mixed-signal components (semiconductor and piezoelectric) for radar, communication, IoT, solid-state electronic devices, high-speed interconnects and integration, and devices that exploit new nanoscale materials and physics. + Lead IC designs within our internal radiation-hardened technologies as well as modern external foundries + Plans, conducts, and executes Sandia's science and engineering programs within the spectrum of fundamental research, development, or demonstration + Play a key technical role in developing new ideas and proposals for research activities including junior staff + Communicate results and findings to peers and sponsors through presentation, and peer reviewed publications + Review/Write specifications for RF components used in radar systems + Identify, develop, and pursue new technology opportunities in areas that support Sandia mission activities The selected applicant can be a remote worker located in any U.S. State or District of Columbia. Regular or periodic travel to your assigned work location may be required. Salary Range: $157,100 - $267,000 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require: + Master's in Electrical Engineering plus eight years or more years' relevant experience + RF or high-speed integrated circuit design using Cadence Virtuoso + Experience in radio frequency design including electromagnet modeling and analysis, frequency analysis, noise analysis, power matching analysis, radiation hardening by design and/or link budget analysis + Ability to obtain and maintain a DOE Q-level security clearance Qualifications We Desire: + PhD in Electrical Engineering plus five (5) years' of relevant experience or proven experience designing LNA, mixer, power amplifiers, RF and analog filters, high speed analog, and PLL blocks + Strong written and presentation skills to provide sponsors and vendors convincing evidence of quality designs + Ability to work independently and within a multi-disciplinary team of peers to meet specifications + Strong interpersonal skills which include teamwork, effective leadership, negotiation, delegation, and conflict resolution + Understanding of: + fabrication process for integrated circuits + die attaching, wirebonding, and packaging + advanced automated assembly processes for die and very small SMT components + Experience: + developing complex microsystem solutions including analog, digital, RF, and other technologies + modeling electromagnetic effects on and off die + heterogeneously integrating die onto various dielectric interposers or PCBs to maintain signal integrity and improve throughput + Interest in enabling next-generation advances in quantum information, ultra-low-power RF microsystems, electromagnetic interference mitigation, and high-speed heterogeneous integration. + Demonstrated oral, written, and technical writing skills to provide sponsors and vendors convincing evidence of quality designs + Experience with/in: Analog and RF modeling using commercially available simulation tools in semiconductor, electromagnetic, and/or optical Integrated circuit design using Cadence, Mentor Graphics, Synopsis, ADS, HFSS, EMX + Multiple peer reviewed published papers in the field of integrated circuit design + Active DOE Q or DOD TS security clearance About Our Team: The RF ICs and Microsystems department performs research, design, modeling, characterization, and qualification of RF microelectronics. We have a focus on efficient, high performance RF component design, electromagnetic modeling, as well as novel wireless sensor development. We have capabilities for developing between prototypes to fully qualified hardware. We provide unique solutions to our customers in nuclear weapons, DoD, non-proliferation agencies, and subsystem departments (SAR, surety, & ISR). Our research interests include advanced RF sensors, low power communication devices, quantum computing electromagnetics, advanced radar component design, and next generation resonators for clocks unique to national security applications. Join this team to make a difference for our nation and work toward your individual goals. Posting Duration: This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance: Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs: If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Job ID: 695605 Job Family: RD Regular/Temporary Position: R Full/Part-Time Status: F

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like Are you driven by a passion for innovation and eager to leverage state-of-the-art facilities to tackle complex challenges? Do you want to be part of a diverse team dedicated to addressing critical national interests? If so, we invite you to join our dynamic team as a Radar System Engineer! While others only dream of the future, we dare to realize it. Don't miss out on an extraordinary unique opportunity at Sandia unlike any other place to gain experience for a national priority. Why not join us? We want you to be a part of our innovative and collaborative team and make an impact on the nation and the world! In this role, you will have the opportunity to engage in a variety of exciting tasks, including: * Data Analysis: Analyze data from radar tests to evaluate functionality, diagnose issues, and recommend enhancements. This will often involve developing custom methods and techniques tailored to specific challenges. * Collaborative Design: Work closely with a multidisciplinary team of engineers to design and qualify electrical components, making informed technical decisions that shape the direction of our projects. * Algorithm Development: Create and refine algorithms for signal processing in radar and communication systems, contributing to the advancement of cutting-edge technologies. * Technical Presentations: Present and defend your approaches and results at technical reviews, showcasing your expertise and insights to stakeholders. Due to the nature of the job, the selected candidate must be able to work onsite. Salary Range $99,400 - $193,600 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. * The ability to acquire and maintain a DOE Q-level security clearance. Qualifications We Desire The ideal R&D S&E Microwave and Sensor Engineering candidate for Sandia National Laboratories will in addition possess the following: * Graduate degree in Electrical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). * Laboratory skills and knowledge of RF and digital test equipment. * Knowledge of RF, Digital Communications, Electronic Warfare, and Cyber Security systems and principles. * Ability to work successfully in a dynamic, interdisciplinary, teaming environment. Also, for this posting we are seeking individuals with the following experience: * A solid background in radar systems and signal processing techniques. * Proficiency in MATLAB or equivalent programming/analysis languages for data analysis and algorithm development. * Awareness of radar hardware components, testing, and assembly methods. * Experience in transitioning data processing algorithms to hardware implementations. * Familiarity with processing large and complex datasets. Awareness of radar hardware components, testing, and assembly methods. * Familiarity with ND systems and performance analysis. * Experience in effectively communicating complex technical issues to customers and stakeholders. * An active DOE Q-level security clearance. About Our Team The Advanced Radar and Future Fuzing Department is the Nation's premier Advanced and Exploratory (A&E) design team for Nuclear Deterrence (ND) Fuzes, with a focus on radar systems. We are responsible for generating new modular fuze concepts, designs, prototypes, tests, and analyses for next generation ND systems. The department teams extensively with other Sandia organizations to support National Nuclear Security Administration (NNSA), Navy, and Air Force customers. We execute R&D for fuzing systems from the RF component level circuit design to Radar system level design and analysis. The Department also provides ongoing support to ND Programs of Record (W88 ALT370, Mk21 AFA, B61-12, W93) through close partnership with our sister Department 5353, Radar Fuzing. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

About Sandia: Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: + Challenging work with amazing impact that contributes to security, peace, and freedom worldwide + Extraordinary co-workers + Some of the best tools, equipment, and research facilities in the world + Career advancement and enrichment opportunities + Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) + Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* *These benefits vary by job classification. What Your Job Will Be Like: Are you driven by a passion for innovation and eager to leverage state-of-the-art facilities to tackle complex challenges? Do you want to be part of a diverse team dedicated to addressing critical national interests? If so, we invite you to join our dynamic team as a Radar System Engineer! While others only dream of the future, we dare to realize it. Don't miss out on an extraordinary unique opportunity at Sandia unlike any other place to gain experience for a national priority. Why not join us? We want you to be a part of our innovative and collaborative team and make an impact on the nation and the world! In this role, you will have the opportunity to engage in a variety of exciting tasks, including: + Data Analysis: Analyze data from radar tests to evaluate functionality, diagnose issues, and recommend enhancements. This will often involve developing custom methods and techniques tailored to specific challenges. + Collaborative Design: Work closely with a multidisciplinary team of engineers to design and qualify electrical components, making informed technical decisions that shape the direction of our projects. + Algorithm Development: Create and refine algorithms for signal processing in radar and communication systems, contributing to the advancement of cutting-edge technologies. + Technical Presentations: Present and defend your approaches and results at technical reviews, showcasing your expertise and insights to stakeholders. Due to the nature of the job, the selected candidate must be able to work onsite. Salary Range: $99,400 - $193,600 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require: + Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. + The ability to acquire and maintain a DOE Q-level security clearance. Qualifications We Desire: The ideal R&D S&E Microwave and Sensor Engineering candidate for Sandia National Laboratories will in addition possess the following: + Graduate degree in Electrical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). + Laboratory skills and knowledge of RF and digital test equipment. + Knowledge of RF, Digital Communications, Electronic Warfare, and Cyber Security systems and principles. + Ability to work successfully in a dynamic, interdisciplinary, teaming environment. Also, for this posting we are seeking individuals with the following experience: + A solid background in radar systems and signal processing techniques. + Proficiency in MATLAB or equivalent programming/analysis languages for data analysis and algorithm development. + Awareness of radar hardware components, testing, and assembly methods. + Experience in transitioning data processing algorithms to hardware implementations. + Familiarity with processing large and complex datasets. Awareness of radar hardware components, testing, and assembly methods. + Familiarity with ND systems and performance analysis. + Experience in effectively communicating complex technical issues to customers and stakeholders. + An active DOE Q-level security clearance. About Our Team: The Advanced Radar and Future Fuzing Department is the Nation's premier Advanced and Exploratory (A&E) design team for Nuclear Deterrence (ND) Fuzes, with a focus on radar systems. We are responsible for generating new modular fuze concepts, designs, prototypes, tests, and analyses for next generation ND systems. The department teams extensively with other Sandia organizations to support National Nuclear Security Administration (NNSA), Navy, and Air Force customers. We execute R&D for fuzing systems from the RF component level circuit design to Radar system level design and analysis. The Department also provides ongoing support to ND Programs of Record (W88 ALT370, Mk21 AFA, B61-12, W93) through close partnership with our sister Department 5353, Radar Fuzing. Posting Duration: This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance: Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs: If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Job ID: 696542 Job Family: RD Regular/Temporary Position: R Full/Part-Time Status: F

About Sandia Sandia National Laboratories is the nation s premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like We are seeking a highly versatile R&D Mechanical Engineer to work with a team of other engineers and technologists to support the daily operations and projects within the Light Initiated High Explosives (LIHE) facility. On any given day, you may be called on to: * Support the daily operations of projects within the Light Initiated High Explosives (LIHE) facility * Support research for the development of environmental testing using Light Initiated High Explosives * Design, integrate and implement equipment and process solutions to overcome technical problems as part of the LIHE Team * Operate and maintain lab equipment including robotic sprayers, remote manipulators, high voltage capacitor banks and diagnostics tools * Design equipment and fixtures using modeling software such as SolidWorks * Assist with projects and experiments based on PI direction * Document designs, experiments, and processes * Maintain compliance with environmental, safety, security and health requirements by developing and documenting work plans, operating procedures, security plans, waste treatment documentation packages, etc Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range $99,400 - $193,600 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * A Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development * An active DOE Q clearance, or equivalent is required to start Qualifications We Desire The ideal R&D S&E Mechanical Engineer candidate for Sandia National Laboratories will in addition possess the following: * Graduate degree in Mechanical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). * Experience with mechanical engineering and product realization in the NNSA complex. * Strong verbal and written communication skills, ability to work effectively in multidisciplinary teams Also, for this posting we are seeking individuals with the following experience: * Evidence of good academic performance * Familiarity with explosives testing * Experience working in a laboratory setting * Experience with: * Robotic systems * X-ray diagnostics systems * Mechanical and/or electrical systems including design, fabrication, and testing * Developing processes, technical work documents and procedures * Developing equipment and process solutions * Achieving compliance with environmental, safety and security requirements * Analyzing data using LabVIEW or MATLAB software * Experience using: * High speed photometrics equipment (Photron preferred) * Modeling software such as SolidWorks * Ability to document work and processes * Ability to work as part of a team as well as the ability to work independently * Willingness to qualify as an explosive operator and work with high explosive materials About Our Team Department 07456 conducts validation and surveillance large-scale explosives testing within Sandia's remote technical areas in support of Nuclear Weapons (NW) and Work for Others (WFOs) programs. It supports other Explosive Technology Group (ETG) operations through fabrication of explosive and non-explosive weapons parts/components. In addition, the department has a cross-cutting role within the ETG for explosives handling, shipping, receiving, inventory and machining and for all facility upgrades and maintenance. The Department operates and maintains remote testing facilities including the Terminal Ballistics Facility (TBF), Light Initiated High Explosives (LIHE) Facility and the Explosive Machining Facility (EMF). Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Position requires a Department of Energy (DOE) Q security clearance to start, or equivalent active security clearance with another U.S. government agency (e.g., DOD). Sandia is required by DOE directive to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

About Sandia: Sandia National Laboratories is the nation s premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: + Challenging work with amazing impact that contributes to security, peace, and freedom worldwide + Extraordinary co-workers + Some of the best tools, equipment, and research facilities in the world + Career advancement and enrichment opportunities + Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) + Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* *These benefits vary by job classification. What Your Job Will Be Like: We are seeking a highly versatile R&D Mechanical Engineer to work with a team of other engineers and technologists to support the daily operations and projects within the Light Initiated High Explosives (LIHE) facility. On any given day, you may be called on to: + Support the daily operations of projects within the Light Initiated High Explosives (LIHE) facility + Support research for the development of environmental testing using Light Initiated High Explosives + Design, integrate and implement equipment and process solutions to overcome technical problems as part of the LIHE Team + Operate and maintain lab equipment including robotic sprayers, remote manipulators, high voltage capacitor banks and diagnostics tools + Design equipment and fixtures using modeling software such as SolidWorks + Assist with projects and experiments based on PI direction + Document designs, experiments, and processes + Maintain compliance with environmental, safety, security and health requirements by developing and documenting work plans, operating procedures, security plans, waste treatment documentation packages, etc Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range: $99,400 - $193,600 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require: + A Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development + An active DOE Q clearance, or equivalent is required to start Qualifications We Desire: The ideal R&D S&E Mechanical Engineer candidate for Sandia National Laboratories will in addition possess the following: + Graduate degree in Mechanical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). + Experience with mechanical engineering and product realization in the NNSA complex. + Strong verbal and written communication skills, ability to work effectively in multidisciplinary teams Also, for this posting we are seeking individuals with the following experience: + Evidence of good academic performance + Familiarity with explosives testing + Experience working in a laboratory setting + Experience with: + Robotic systems + X-ray diagnostics systems + Mechanical and/or electrical systems including design, fabrication, and testing + Developing processes, technical work documents and procedures + Developing equipment and process solutions + Achieving compliance with environmental, safety and security requirements + Analyzing data using LabVIEW or MATLAB software + Experience using: + High speed photometrics equipment (Photron preferred) + Modeling software such as SolidWorks + Ability to document work and processes + Ability to work as part of a team as well as the ability to work independently + Willingness to qualify as an explosive operator and work with high explosive materials About Our Team: Department 07456 conducts validation and surveillance large-scale explosives testing within Sandia's remote technical areas in support of Nuclear Weapons (NW) and Work for Others (WFOs) programs. It supports other Explosive Technology Group (ETG) operations through fabrication of explosive and non-explosive weapons parts/components. In addition, the department has a cross-cutting role within the ETG for explosives handling, shipping, receiving, inventory and machining and for all facility upgrades and maintenance. The Department operates and maintains remote testing facilities including the Terminal Ballistics Facility (TBF), Light Initiated High Explosives (LIHE) Facility and the Explosive Machining Facility (EMF). Posting Duration: This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance: Position requires a Department of Energy (DOE) Q security clearance to start, or equivalent active security clearance with another U.S. government agency (e.g., DOD). Sandia is required by DOE directive to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs: If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Job ID: 696489 Job Family: RD Regular/Temporary Position: R Full/Part-Time Status: F

About Sandia Sandia National Laboratories is the nation s premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like We are seeking an experienced Electronics Engineer to design, develop and support high assurance electronic products. Your daily roles and responsibilities will involve: * Playing a key role in development, maturation, and deployment of advanced technologies for next- generation weapon systems and support equipment. * Working with multi-disciplinary teams of electrical, mechanical, software, systems, and test engineers in the design and qualification of products. * Design of FPGA/ASIC based digital and analog circuits, and integration with commercial off the shelf microcontrollers, memories, and peripherals using existing standards-based communications protocols. * Collaborating with and advising technologists who work in a lab environment. Due to the nature of the work, the selected applicant must be able to work onsite full time in either NM or CA. Some travel is required for this position (less than 10%, or approximately 5 weeks out of the year). Applicants on this requisition may be interviewed by multiple organizations at Sandia National Laboratories. Salary Range $114,000 - $227,500 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * A Bachelor's degree in a relevant discipline and five (5) years of directly relevant experience, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. * Ability to acquire a DOE Q level security clearance. Qualifications We Desire The ideal R&D S&E Electrical Engineer candidate for Sandia National Laboratories will in addition possess the following: * Graduate degree in Electrical Engineering, Computer Engineering, or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). * Demonstrated experience with analog and digital circuit design and analysis. * Hands-on experience testing and de-bugging circuitry, with clear mastery of tools such as oscilloscopes, logic/network/spectrum analyzers, function/pulse generators, etc. * Proven experience with design and analysis tools (e.g., Matlab and LabVIEW), analog simulation codes (e.g., LTSpice), and HDL simulation codes (e.g.,ModelSim). * Strong verbal and written communication skills, ability to work effectively in multidisciplinary teams. Also, for this posting we are seeking individuals with the following experience: * Experience with at least one electrical software tools such as VHDL, Mentor Graphics, ORCAD, Altium Designer, Cadence PSPICE, etc. * Experience with cryptography hardware and firmware design. * Experience in VHDL, Verilog, C, C++, and/or custom ASIC design. * Electrical and environmental qualification testing and documentation experience. * Experience in production processes and design for manufacturability. * Experience with JMP, MATLAB, or other data aggregation and statistical analysis toolsets. * Experience with configuration management tools. * Nuclear Weapon and/or Use Control design experience. Or an understanding of the history of the Nuclear Weapons complex. * Experience working with multi-disciplinary teams. About Our Team The High Assurance Product Realization group develops embedded and ground support equipment in support of high assurance National Security missions. We are a leader for high-assurance National Security hardware, utilizing current and advanced electronic hardware approaches, tools, and techniques in developing information assurance subsystems. These responsibilities span research, design, development, production liaison, and existing product evaluation for Use Control Applications. Our staff develops custom electronic technologies in support of the DOE/DoD Use Control community and specialize in real-time embedded electronic design solutions with emphasis on security and reliability. The team also has a key role in the development, maturation, and deployment of advanced technologies for next-generation weapon systems and information assurance products. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the `posting date. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like The Radiation-Solid Interactions Department at Sandia National Laboratories, which operates the Ion Beam Laboratory (IBL), is seeking a senior physicist with a strong interest and expertise in the modeling of radiation induced defects in semiconductor materials and devices. The successful candidate will explore development and use of computational simulations, including a Sandia developed 1D Experimental Physics Code (XPD), clustering of electrically active defects in state-of-the-art semiconductor devices and simulation of ion beam implantation and irradiation. Current projects include: * 1D Experimental Physics Code (XPD): Investigating the effects of radiation induced electrically active defects on semiconductor materials and devices using an atomistic based drift diffusion model that is defect aware. * Clustering of Defects: Exploring the effects of radiation induced defects on state-of-the-art semiconductor devices including FINFET and GAAFET geometries. * Ion Beam Implantation and Irradiation: Explore the effects of ion irradiation and implantation using binary collision approximate codes including SRIM and Marlowe. While this position is primarily modeling, and simulation based a candidate would be expected to interact with multiple experimental staff and develop a solid understanding of ion beam implantation and irradiation capabilities at the IBL to further understand the radiation induced defects and characterization. Additionally, you will collaborate with a multidisciplinary team, engaging with both internal and external at Sandia and Los Alamos National Laboratories. On any given day, you may be called on to: * Develop and Utilize Computational simulations of radiation effects in semiconductor devices, including 1D Experimental Physics Codes (XPD) and commercial TCAD software: We routinely use the XPD code to simulate the effects of radiation on a wide variety of materials and devices including Si, GaAs and GaN including diodes, bipolar junction transistors (BJTs), heterojunction bipolar transistors (HBTs), high voltage diodes (HV) and high electron mobility transistors (HEMTs). XPD is an in-house developed defect aware drift-diffusion code that outputs a time dependent carrier flow based on capture and emission of carriers by defects and evolution of defects by diffusion and reactions, i.e. annealing. * Develop and Utilize Binary Collision Codes (BCC) for Ion Implantation and Irradiation Studies: We use BCC codes SRIM and Marlowe, to explore the effects of ion beam implantation and irradiation. Additionally, we develop novel implementation that allow us to explore the effects of defect clustering on state-of-the-art CMOS devices. * Collaborate in a Multidisciplinary Team: Contribute to significant advancements in the quantum realm, resulting in multiple high-impact publications, including articles in prestigious journals such as Science and Nature, as well as several R&D 100 awards for innovative solutions in radiation effects testing. * Generate Research Publications and Present at Leading Technical Conferences: Actively contribute to the dissemination of research findings through publications and presentations at prominent technical conferences. Due to the nature of the work the selected applicant must be able to work onsite in Albuquerque, New Mexico. Relocation will be provided for those that qualify. Salary Range $114,000 - $227,500 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * A Bachelor's degree in a relevant discipline (Astrophysics, Atmospheric Science and Meteorology, Atomic Physics, Molecular and Optical Physics, Engineering Physics, Applied Physics, Nuclear Physics, Physics and Astronomy). * Five (5) years of directly relevant experience, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. * Ability to acquire and maintain a DOE Q-level security clearance. Qualifications We Desire The ideal R&D S&E Physics candidate for Sandia National Laboratories will in addition possess the following: * Graduate degree in Physics or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). * Experience preparing research for dissemination through presentations at national conferences and peer-reviewed publications in top journals. * Demonstrated leadership abilities of both projects and teams and the ability to work in loosely defined areas with minimal direction while maintaining vision for the overall mission. * Strong verbal and written communication skills, ability to work effectively in multidisciplinary teams. Also, for this posting we are seeking individuals with the following experience: Educational Qualifications: * Masters Degree with a minimum of ten (10) years of relevant experience in a national laboratory, academic, or industrial setting. * Ph.D. in Physics, Chemistry, Materials Science, Electrical Engineering, or a related field, accompanied by at least two (2) years of relevant experience in a national laboratory, academic, or industrial environment. Technical Expertise: * Solid understanding of semiconductor material and devices physics * Understanding of radiation induced defects in semiconductor materials * Understanding of semiconductor material and devices characterization techniques, capacitance-voltage measurements, DLTS, photoluminescence, and ion beam analysis techniques including Rutherford backscattering spectrometry (RBS), nuclear reaction analysis (NRA) and elastic recoil detection (ERD), etc. Programming and Software Skills: * Proficient in programming languages such as Python, Visual C, Fortran and LabVIEW, with experience in software development. Research Leadership: * Experience in managing research teams composed of scientists, technologists, postdoctoral scholars, and/or graduate students. About Our Team The Radiation-Solid Interactions Department is a dynamic team comprised of students, post-doctoral appointees, permanent technical staff, and technologists dedicated to operating and maintaining the Ion Beam Laboratory (IBL). Our vibrant team brings together a diverse range of backgrounds, skill sets, and work styles, fostering a collaborative environment. The IBL is equipped with eight major accelerators, including a 6 MV Tandem, a 3 MV Single Ended Pelletron, a 1 MV tandem, a 400 kV implanter, two 30 kV Helium Ion Microscopes, and both 35 kV and 100 kV mass velocity filtered focused ion beam systems, achieving spot sizes of less than 10 nm on target. Additional experimental facilities include microbeam lines on all major accelerators and a Transmission Electron Microscope (TEM) equipped with gas, fluid, and nanomechanical stages, allowing for in-situ ion irradiation from both the Tandem and a Colutron source. While our major equipment is typically operated by individual technologists, the team collaborates to develop new capabilities, perform maintenance, and achieve significant scientific results. The IBL focuses on three major research thrusts: 1. Understanding Material and Device Performance in Radiation Environments: These projects investigate the performance of microelectronics in space and other hostile environments, as well as cladding materials used in nuclear reactors and storage facilities. 2. Developing and Applying Novel Ion Beam Techniques for Material and Surface Characterization: We utilize advanced techniques to precisely measure material compositions, including mapping hydrogen isotopes in fusion wall materials and analyzing the composition of complex thin films such as transition metal oxides. 3. Exploring the Materials Science of Defects in Solids: This broad area encompasses single ion implants for quantum applications, anomalous grain growth in nanograined materials, hydride formation under irradiation, and the nanomechanical responses of materials. Within each research thrust, individual staff members cultivate deep expertise in their respective fields, while our technologists acquire specialized knowledge in instrumentation and data acquisition. Teams are formed by leveraging these complementary skill sets to collaborate on research that directly impacts Sandia s mission areas. Our leadership is committed to fostering a culture that embraces diversity and inclusivity, encourages open dialogue and the sharing of ideas, and strives for excellence in research. Join us in pursuing your goals while making a meaningful difference! Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like The Radiation-Solid Interactions Department at Sandia National Laboratories, which operates the Ion Beam Laboratory (IBL), is seeking a senior physicist scientist with a strong interest and expertise in focused ion beam implantation/irradiation and optical testing using photoluminescence. The successful candidate will explore the creation and characterization of single-atom-based devices in wide bandgap materials such as diamond, SiC, etc, silicon CMOS structures, and III-V devices. Current projects using focused ion beams include: * Diamond Defect Center Formation: Investigating NV, SiV, GeV, SnV, PbV, and other defect centers for applications in quantum sensing, single-photon sources, and distributed quantum information processing. * Novel Defect Center Formation: Exploring defect centers in 2D transition metal dichalcogenides (TMDs) and ultra-wide bandgap materials such as hBN, MOS2, etc. * Deterministic Seeding of Conductive Filaments: Researching TaOx memristive memories and novel magnetic junction memories. * Single Particle Irradiation Effects in Advanced CMOS Devices: Studying localized radiation effects in state-of-the-art CMOS technologies, including FinFET and GAAFET geometries. This position encompasses both nanofabrication and optical testing of cutting-edge materials and devices. The role will utilize a range of focused ion beam implantation capabilities including both 100 kV and 35 kV mass-separated focused ion beam systems. Additionally, you will collaborate with a multidisciplinary team, engaging with both internal and external partners through close connections with the Center for Integrated Technology (CINT) at Sandia and Los Alamos. On any given day, you may be called on to: * Develop and Utilize Unique Nanoimplantation Systems: Use focused ion beam systems that enable the direct writing of nanometer-scale devices using a variety of ion species and energies, achieving single-atom device fabrication with resolutions in the tens of nanometers * Implement testing of optically active defects: Conduct optical characterization of in-house fabricated single-atom devices using confocal photoluminescence setups and perform electrical characterization with a low-temperature probe station. * Collaborate in a Multidisciplinary Team: Contribute to significant advancements in the quantum realm, resulting in multiple high-impact publications, including articles in prestigious journals such as Science and Nature, as well as several R&D 100 awards for innovative solutions in radiation effects testing. * Generate Research Publications and Present at Leading Technical Conferences: Actively contribute to the dissemination of research findings through publications and presentations at prominent technical conferences. Due to the nature of the work the selected applicant must be able to work onsite in Albuquerque, New Mexico. Relocation will be provided for those that qualify. Salary Range $114,000 - $227,500 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * A Bachelor's degree in a relevant discipline (Astrophysics, Atmospheric Science and Meteorology, Atomic Physics, Molecular and Optical Physics, Engineering Physics, Applied Physics, Nuclear Physics, Physics and Astronomy) * Five (5) years of directly relevant experience, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. Qualifications We Desire The ideal R&D S&E Physics candidate for Sandia National Laboratories will in addition possess the following: * Graduate degree in Physics or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). * Experience preparing research for dissemination through presentations at national conferences and peer-reviewed publications in top journals. * Demonstrated leadership abilities of both projects and teams and the ability to work in loosely defined areas with minimal direction while maintaining vision for the overall mission. * Strong verbal and written communication skills, ability to work effectively in multidisciplinary teams. Also, for this posting we are seeking individuals with the following experience * Master's Degree with a minimum of ten (10) years of relevant experience in a national laboratory, academic, or industrial setting. Ph.D. in Physics, Chemistry, Materials Science, Electrical Engineering, or a related field, accompanied by at least three (3) years of relevant experience in a national laboratory, academic, or industrial environment. * Optical characterization techniques for single-atom based devices using photoluminescence (PL), Raman, or other optical techniques. * Proficient in utilizing ion (keV to multi-MeV), electron (keV to MeV), or neutron techniques for semiconductor materials or device testing, including radiation effects testing, materials analysis and/or material modification. * Experience in managing research teams composed of scientists, technologists, postdoctoral scholars, and/or graduate students. * Proficient in programming languages such as Python, Visual C, and LabVIEW, with experience in software-hardware interaction. * Demonstrated experience in integrating hardware and software systems * Hands-on experience in testing and debugging electronic systems and circuitry, with demonstrated proficiency in using oscilloscopes, logic/network/spectrum analyzers, function and pulse generators, and related instrumentation. * Experience in developing safe operating procedures for potentially high-hazard systems and managing operations within a multi-user facility. About Our Team The Radiation-Solid Interactions Department is a dynamic team comprised of students, post-doctoral appointees, permanent technical staff, and technologists dedicated to operating and maintaining the Ion Beam Laboratory (IBL). Our vibrant team brings together a diverse range of backgrounds, skill sets, and work styles, fostering a collaborative environment. The IBL is equipped with eight major accelerators, including a 6 MV Tandem, a 3 MV Single Ended Pelletron, a 1 MV tandem, a 400 kV implanter, two 30 kV Helium Ion Microscopes, and both 35 kV and 100 kV mass velocity filtered focused ion beam systems, achieving spot sizes of less than 10 nm on target. Additional experimental facilities include microbeam lines on all major accelerators and a Transmission Electron Microscope (TEM) equipped with gas, fluid, and nanomechanical stages, allowing for in-situ ion irradiation from both the Tandem and a Colutron source. While our major equipment is typically operated by individual technologists, the team collaborates to develop new capabilities, perform maintenance, and achieve significant scientific results. The IBL focuses on three major research thrusts: * Understanding Material and Device Performance in Radiation Environments: These projects investigate the performance of microelectronics in space and other hostile environments, as well as cladding materials used in nuclear reactors and storage facilities. * Developing and Applying Novel Ion Beam Techniques for Material and Surface Characterization: We utilize advanced techniques to precisely measure material compositions, including mapping hydrogen isotopes in fusion wall materials and analyzing the composition of complex thin films such as transition metal oxides. * Exploring the Materials Science of Defects in Solids: This broad area encompasses single ion implants for quantum applications, anomalous grain growth in nanograined materials, hydride formation under irradiation, and the nanomechanical responses of materials. Within each research thrust, individual staff members cultivate deep expertise in their respective fields, while our technologists acquire specialized knowledge in instrumentation and data acquisition. Teams are formed by leveraging these complementary skill sets to collaborate on research that directly impacts Sandia's mission areas. Our leadership is committed to fostering a culture that embraces diversity and inclusivity, encourages open dialogue and the sharing of ideas, and strives for excellence in research. Join us in pursuing your goals while making a meaningful difference! Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance This position does not currently require a Department of Energy (DOE) security clearance. Sandia will conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Furthermore, employees in New Mexico need to pass a U.S. Air Force background screen for access to Kirtland Air Force Base. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause access to be denied or terminated, resulting in the inability to perform the duties assigned and subsequent termination of employment. Under federal law, citizens and agents of the People's Republic of China, the Islamic Republic of Iran, the Democratic People's Republic of North Korea, and the Russian Federation are generally prohibited from accessing Sandia National Laboratories. Accordingly, such individuals will not be considered for employment unless they are also a citizen of the United States. If hired without a clearance and it subsequently becomes necessary to obtain and maintain one for the position, or you bid on positions that require a clearance, a pre-processing background review may be conducted prior to a required federal background investigation. Applicants for a DOE security clearance need to be U.S. citizens. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Members of the workforce (MOWs) hired at Sandia who require uncleared access for greater than 179 days during their employment, are required to go through the Uncleared Personal Identity Verification (UPIV) process. Access includes physical and/or cyber (logical) access, as well as remote access to any NNSA information technology (IT) systems. UPIV requirements are not applicable to individuals who require a DOE personnel security clearance for the performance of their SNL employment or to foreign nationals. The UPIV process will include the completion of a USAccess Enrollment, SF-85 (Questionnaire for Non-Sensitive Positions) and OF-306 (Declaration of for Federal Employment). An unfavorable UPIV determination will result in immediate retrieval of the SNL issued badge, removal of cyber (logical) access and/or removal from SNL subcontract. All MOWs may appeal the unfavorable UPIV determination to DOE/NNSA immediately. If the appeal is unsuccessful, the MOW may try to go through the UPIV process one year after the decision date. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like We are seeking hardworking, self-directed, results focused individuals who have strong interpersonal skills to support lab-wide efforts focusing on the cybersecurity of embedded hardware systems, such as flight vehicles, rocket systems, automotive semi-trailer trucks, cellular mobile devices, and weapon systems! This cybersecurity R&D staff member will perform research, capability development, and analyses using empirical, analytical, and computational techniques to secure, design, and analyze embedded systems. The responsibilities associated with this position span the spectrum of activities from research & development to assessment & secure design engineering. On any given day, you may be called on to: * Work with other researchers across the Labs over the capability development cycle to discover, model, validate, and apply new or existing cybersecurity capabilities to embedded systems to deal with constantly evolving technical needs and requirements. * You will be involved in supporting Sandia s numerous test programs, working to analyze proposed systems to support design, and analyze test data to validate models in support of these programs. It is expected that this experience will feed back into the capability development cycle. Join our dynamic team and make a difference. The selected candidate will help cultivate relationships, grow existing programs, and develop new programs with both new and existing customers across US government agencies, including the Department of War (DoW) and programs inside and outside the National Security Program (NSP). They will also be responsible for collaborating closely with peers and management across the Labs. Due to the nature of the work, the selected applicant must be able to work onsite in Albuquerque, NM. Salary Range $114,000 - $227,500 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * A Bachelor's degree in a relevant discipline and five (5) years of directly relevant experience, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. * The ability to obtain and maintain a DOE Q clearance. * The ability to obtain and maintain an SCI clearance, which may may require a polygraph. Qualifications We Desire The ideal R&D Cybersecurity Engineer candidate for Sandia National Laboratories will in addition possess the following: * Graduate degree in Computer Science/Engineering, Electrical Engineering, Computer Information Systems, Computer Forensics, Mathematics or a directly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). * Active DOE Q or DOD TS security clearance with the ability to obtain and maintain an SCI. * Experience in one or more of the following: reverse engineering, software vulnerability assessment, web application assessment, computer networking, computer architecture, compilers, or similar computer security topics. * Proficiency in scripting or high-level programming. * Familiarity with secure-system design principles and information assurance principles. * Excellent communication skills and a demonstrated ability to develop technical ideas and results and present them in oral and written form in a concise manner. Ideally, we would like to see your background include some of the following: * Real-time operating systems (RTOS) and embedded systems. * Low-level research in multiple levels of firmware. * Embedded systems vulnerability analysis. * Professional experience in either weapon system design, embedded system design, mobile device security, vulnerability analysis, or embedded hardware security. * Programming experience with an understanding of memory and resource management * Analyzing device software, hardware, and communications protocols. * Auditing code in C/C++, Java, Python, assembly, or other languages * Hardware virtualization technologies. * Assembly or operating system, application layer, Dev-Ops, and/or network layer programming * Deciphering file formats, data structures, and network protocols * Analyzing mobile device software and hardware * RF (radiofrequency) signal analysis * Mobile/cellular protocols, operating systems, and applications security * Well-developed leadership skills and able to prioritize and execute in a principled and focused manner About Our Team The Cyber Systems Security R&D Department is a forward-looking security risk management team of experts that analyze existing and future security architectures and technologies, and develop next generation methods and tools to improve the security effectiveness and assurance of our nation's critical systems. We employ systems engineering approaches across a spectrum that covers embedded, wireless, enterprise, and globally connected technologies. Our multidisciplinary R&D security research group includes electrical engineers, computer scientists, network security and engineering experts, and security risk management thought leaders. Core program areas our teams support include system red teaming, specialized secure software development, and enterprise security risk assessments. We have exciting career opportunities for individuals with a passion to improve the security effectiveness of our nations critical systems and technologies. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance and SCI access, both of which require US citizenship. SCI access may also require a polygraph examination. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain these levels of access may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by the DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

About Sandia: Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: + Challenging work with amazing impact that contributes to security, peace, and freedom worldwide + Extraordinary co-workers + Some of the best tools, equipment, and research facilities in the world + Career advancement and enrichment opportunities + Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) + Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* *These benefits vary by job classification. What Your Job Will Be Like: The Radiation-Solid Interactions Department at Sandia National Laboratories, which operates the Ion Beam Laboratory (IBL), is seeking a senior physicist with a strong interest and expertise in the modeling of radiation induced defects in semiconductor materials and devices. The successful candidate will explore development and use of computational simulations, including a Sandia developed 1D Experimental Physics Code (XPD), clustering of electrically active defects in state-of-the-art semiconductor devices and simulation of ion beam implantation and irradiation. Current projects include: + 1D Experimental Physics Code (XPD): Investigating the effects of radiation induced electrically active defects on semiconductor materials and devices using an atomistic based drift diffusion model that is defect aware. + Clustering of Defects: Exploring the effects of radiation induced defects on state-of-the-art semiconductor devices including FINFET and GAAFET geometries. + Ion Beam Implantation and Irradiation: Explore the effects of ion irradiation and implantation using binary collision approximate codes including SRIM and Marlowe. While this position is primarily modeling, and simulation based a candidate would be expected to interact with multiple experimental staff and develop a solid understanding of ion beam implantation and irradiation capabilities at the IBL to further understand the radiation induced defects and characterization. Additionally, you will collaborate with a multidisciplinary team, engaging with both internal and external at Sandia and Los Alamos National Laboratories. On any given day, you may be called on to: + Develop and Utilize Computational simulations of radiation effects in semiconductor devices, including 1D Experimental Physics Codes (XPD) and commercial TCAD software: We routinely use the XPD code to simulate the effects of radiation on a wide variety of materials and devices including Si, GaAs and GaN including diodes, bipolar junction transistors (BJTs), heterojunction bipolar transistors (HBTs), high voltage diodes (HV) and high electron mobility transistors (HEMTs). XPD is an in-house developed defect aware drift-diffusion code that outputs a time dependent carrier flow based on capture and emission of carriers by defects and evolution of defects by diffusion and reactions, i.e. annealing. + Develop and Utilize Binary Collision Codes (BCC) for Ion Implantation and Irradiation Studies: We use BCC codes SRIM and Marlowe, to explore the effects of ion beam implantation and irradiation. Additionally, we develop novel implementation that allow us to explore the effects of defect clustering on state-of-the-art CMOS devices. + Collaborate in a Multidisciplinary Team: Contribute to significant advancements in the quantum realm, resulting in multiple high-impact publications, including articles in prestigious journals such as Science and Nature, as well as several R&D 100 awards for innovative solutions in radiation effects testing. + Generate Research Publications and Present at Leading Technical Conferences: Actively contribute to the dissemination of research findings through publications and presentations at prominent technical conferences. Due to the nature of the work the selected applicant must be able to work onsite in Albuquerque, New Mexico. Relocation will be provided for those that qualify. Salary Range: $114,000 - $227,500 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require: + A Bachelor's degree in a relevant discipline (Astrophysics, Atmospheric Science and Meteorology, Atomic Physics, Molecular and Optical Physics, Engineering Physics, Applied Physics, Nuclear Physics, Physics and Astronomy). + Five (5) years of directly relevant experience, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. + Ability to acquire and maintain a DOE Q-level security clearance. Qualifications We Desire: The ideal R&D S&E Physics candidate for Sandia National Laboratories will in addition possess the following: + Graduate degree in Physics or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). + Experience preparing research for dissemination through presentations at national conferences and peer-reviewed publications in top journals. + Demonstrated leadership abilities of both projects and teams and the ability to work in loosely defined areas with minimal direction while maintaining vision for the overall mission. + Strong verbal and written communication skills, ability to work effectively in multidisciplinary teams. Also, for this posting we are seeking individuals with the following experience: Educational Qualifications: + Masters Degree with a minimum of ten (10) years of relevant experience in a national laboratory, academic, or industrial setting. + Ph.D. in Physics, Chemistry, Materials Science, Electrical Engineering, or a related field, accompanied by at least two (2) years of relevant experience in a national laboratory, academic, or industrial environment. Technical Expertise: + Solid understanding of semiconductor material and devices physics + Understanding of radiation induced defects in semiconductor materials + Understanding of semiconductor material and devices characterization techniques, capacitance-voltage measurements, DLTS, photoluminescence, and ion beam analysis techniques including Rutherford backscattering spectrometry (RBS), nuclear reaction analysis (NRA) and elastic recoil detection (ERD), etc. Programming and Software Skills: + Proficient in programming languages such as Python, Visual C, Fortran and LabVIEW, with experience in software development. Research Leadership: + Experience in managing research teams composed of scientists, technologists, postdoctoral scholars, and/or graduate students. About Our Team: The Radiation-Solid Interactions Department is a dynamic team comprised of students, post-doctoral appointees, permanent technical staff, and technologists dedicated to operating and maintaining the Ion Beam Laboratory (IBL). Our vibrant team brings together a diverse range of backgrounds, skill sets, and work styles, fostering a collaborative environment. The IBL is equipped with eight major accelerators, including a 6 MV Tandem, a 3 MV Single Ended Pelletron, a 1 MV tandem, a 400 kV implanter, two 30 kV Helium Ion Microscopes, and both 35 kV and 100 kV mass velocity filtered focused ion beam systems, achieving spot sizes of less than 10 nm on target. Additional experimental facilities include microbeam lines on all major accelerators and a Transmission Electron Microscope (TEM) equipped with gas, fluid, and nanomechanical stages, allowing for in-situ ion irradiation from both the Tandem and a Colutron source. While our major equipment is typically operated by individual technologists, the team collaborates to develop new capabilities, perform maintenance, and achieve significant scientific results. The IBL focuses on three major research thrusts: 1. Understanding Material and Device Performance in Radiation Environments: These projects investigate the performance of microelectronics in space and other hostile environments, as well as cladding materials used in nuclear reactors and storage facilities. 2. Developing and Applying Novel Ion Beam Techniques for Material and Surface Characterization: We utilize advanced techniques to precisely measure material compositions, including mapping hydrogen isotopes in fusion wall materials and analyzing the composition of complex thin films such as transition metal oxides. 3. Exploring the Materials Science of Defects in Solids: This broad area encompasses single ion implants for quantum applications, anomalous grain growth in nanograined materials, hydride formation under irradiation, and the nanomechanical responses of materials. Within each research thrust, individual staff members cultivate deep expertise in their respective fields, while our technologists acquire specialized knowledge in instrumentation and data acquisition. Teams are formed by leveraging these complementary skill sets to collaborate on research that directly impacts Sandia s mission areas. Our leadership is committed to fostering a culture that embraces diversity and inclusivity, encourages open dialogue and the sharing of ideas, and strives for excellence in research. Join us in pursuing your goals while making a meaningful difference! Posting Duration: This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance: Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs: If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Job ID: 696390 Job Family: RD Regular/Temporary Position: R Full/Part-Time Status: F

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like We are seeking a Facilities Engineering Project Manager with cost estimating experience to join a core team whose responsibility will be to develop an in-house estimating capability, of individual projects ranging from $500K to less than $34M, and an annual total of approximately $200M. Once established, the successful candidate will be responsible for providing internal cost estimates to our Project Execution team. On any given day, you may be called on to: * Use estimating expertise as well as relevant technical knowledge in design/construction and project management to successfully complete facility and infrastructure construction cost estimates. * Work closely with project execution staff to identify both technical and non-technical risks, opportunities, and other issues that impact the project during the project execution phase. * Contribute to value engineering proposals to reduce cost of projects. * Develop and maintain a cost estimate database where previous estimates are housed and performance can be measured. Develop cost estimating improvements and processes to assure estimating accuracy from external estimating support vendors. * Assemble and present cost estimating performance metrics in professional presentations. * Communicate with other laboratories and industry to benchmark, gather data, and improve Sandia's estimating capabilities. * This position has no direct reports. Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range $99,400 - $193,600 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * Bachelor's degree in engineering, Architecture, Construction Management or other relevant field, plus five (5) years or more years of directly related experience that demonstrates the knowledge, skills, and ability to perform the duties of the job. * Minimum of five (5) years or more years' experience performing construction cost estimating as your primary occupation. * Professional estimating certification from one of the following: * Certified Cost Professional (CCP) from the Association for the Advancement of Cost Engineering International (AACEI). * Associate Estimating Professional (AEP) from American Society of Professional Cost Estimators (ASPE). * Experience with standard project cost management practices including one or more of the following: * Cost estimating project plan development. * Evaluation of cost estimating. * Evaluation of external market factors and applicability in risk to project cost factors. * Risk and opportunity management. * Ability to obtain and maintain an active DOE Q-level security clearance. Qualifications We Desire * AACEI CEP (Certified Estimating Professional) or ASPE CPE (Certified Professional Estimator) existing or obtained within 2 years of employment. * Experience leading team of professional construction cost estimators. * Knowledge and background in one or more engineering fields, such as Mechanical Engineering, Electrical Engineering, Civil Engineering, Structural Engineering, Architecture or related technical field. * Experience working with construction cost estimating software. * Ability to develop corporate estimating standards and procedures aligned with industry recommended practices and DOE Orders, Standards, Guidance, and prime contract requirements. * Knowledge of management practices, assurance processes, business operations, fiscal and scheduling systems, and project acquisition standards. * Teaming skills, including the ability to work effectively with other organizations, project sponsors and customers, and suppliers. * Organizational skills, including the ability to effectively prioritize and complete tasks in a high-pressure environment. * Ability to operate with a high level of autonomy. About Our Team Department 4120, Project Execution, provides project management and construction management services for buildings and infrastructure to support current and future mission needs at Sandia National Labs. Department 4120 implements projects from initiation, design, construction, and close-out and these projects range in scale, from $50k up to $34M in total project cost. They include facility modifications, infrastructure projects, new facilities, and use various methods of project delivery such as design-bid-build and design-build. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Essential Functions If offered the position, you may be required to demonstrate your fitness to perform certain physical aspects of the position, including lifting, carrying, pushing, and pulling. Apply for Job * Careers * Sign In * New User