A low voltage technician is responsible for monitoring and installing low-voltage cables and systems for electronic equipment and communication devices. Low voltage technicians analyze blueprints and schematics to connect the cables safely and accurately. They also conduct repairs for defective components and faulty wirings, recommending solutions and low-cost materials with high quality according to the customers' needs and budget limitations. A low voltage technician must have excellent electrical and organizational skills, especially in performing duties with utmost adherence to safety guidelines and procedures to prevent hazards and operational delays.

Low Voltage Technician Responsibilities

Here are examples of responsibilities from real low voltage technician resumes representing typical tasks they are likely to perform in their roles.

  • Lead a team of up to four installers that convert several hundr banks on the west coast of Florida to VOIP.
  • Handle and maintain transmission lines and distribution lines 34.5 KV and 13.8 KV.
  • Perform moves, adds or changes on PBX system.
  • Install conduit, including rigid, EMT, PVC and flex.
  • Ensure OSHA rules and regulations are compiled and meet
  • Open support tickets for down T1 lines with LEC.
  • Install insulation on various plumbing pipes and ventilation systems.
  • Install support structures such as ladders, racks and j-hooks.
  • Set up racks and ladders build out of communication closets.
  • Evaluate, diagnose, troubleshoot and perform repairs as necessary.
  • Install Cat-5E from workstations to MDF for data and telephone.
  • Pull and terminate cat-5 and cat-6 phone and data cabling.
  • Trim plates, connections for cat5, coax, and security.
  • Terminate and test cables from pull point back to IDF closet.
  • Install and configure optical network terminals, modems, and routers.

Low Voltage Technician Skills and Personality Traits

We calculated that 9% of Low Voltage Technicians are proficient in Hand Tools, CCTV, and Patch Panels. They’re also known for soft skills such as Communication skills, Physical strength, and Color vision.

We break down the percentage of Low Voltage Technicians that have these skills listed on their resume here:

  • Hand Tools, 9%

    Install, repair or replace wiring, equipment, and fixtures, using hand tools and power tools.

  • CCTV, 8%

    Installed, tested and repaired CCTV and DVR systems for various job sites by following blueprints to ensure correct installation locations.

  • Patch Panels, 6%

    Build out data rooms, dressing cable, terminating patch panels, cross connect, and extend T1.

  • Ladders, 6%

    Climb up poles or buildings using 6 to 8 ft ladders or a 28 foot extension ladder.

  • Security Systems, 5%

    Maintained temporary services of existing security systems during the integration of new, ensuring client satisfaction and property protection.

  • Structured Cabling, 5%

    Structured cabling-Access Control-Audio Visual-Basic IT-Video Surveillance -Intrusion Alarm systems-Fire Alarm Systems-Customer consulting and Surveying.

Some of the skills we found on low voltage technician resumes included "hand tools," "cctv," and "patch panels." We have detailed the most important low voltage technician responsibilities below.

  • Communication skills can be considered to be the most important personality trait for a low voltage technician to have. According to a low voltage technician resume, "electricians work with people on a regular basis" low voltage technicians are able to use communication skills in the following example we gathered from a resume: "terminated, connected, and or punched down to patch panel for a data and communication project. "
  • Another trait important for fulfilling low voltage technician duties is physical strength. According to a low voltage technician resume, "electricians need to be strong enough to move heavy components, which may weigh up to 50 pounds." Here's an example of how low voltage technicians are able to utilize physical strength: "install electronic physical security equipment in the pentagon. "
  • Low voltage technicians are also known for color vision, which can be critical when it comes to performing their duties. An example of why this skill is important is shown by this snippet that we found in a low voltage technician resume: "electricians must identify electrical wires by color." We also found this resume example that details how this skill is put to the test: "terminated cable according to color code specifications 568a, b on the 110 blocks, 66 blocks, and patch panel. "
  • A thorough review of lots of resumes revealed to us that "troubleshooting skills" is important to completing low voltage technician responsibilities. This resume example shows just one way low voltage technicians use this skill: "electricians find, diagnose, and repair problems" Here's an example of how this skill is used from a resume that represents typical low voltage technician tasks: "work with fixed and ptz camera systems, fiber optic equipment, programming, testing and troubleshooting. "
  • See the full list of low voltage technician skills.

    Choose From 10+ Customizable Low Voltage Technician Resume templates

    Build a professional Low Voltage Technician resume in minutes. Browse through our resume examples to identify the best way to word your resume. Then choose from 10+ resume templates to create your Low Voltage Technician resume.

    Low Voltage Technician Resume
    Low Voltage Technician Resume
    Low Voltage Technician Resume
    Low Voltage Technician Resume
    Low Voltage Technician Resume
    Low Voltage Technician Resume
    Low Voltage Technician Resume
    Low Voltage Technician Resume
    Low Voltage Technician Resume
    Low Voltage Technician Resume
    Low Voltage Technician Resume
    Low Voltage Technician Resume
    Low Voltage Technician Resume
    Low Voltage Technician Resume
    Low Voltage Technician Resume
    Low Voltage Technician Resume

    resume document icon

    Don't Have A Professional Resume?

    What Apprentices Do

    An apprentice is responsible for learning specialized tasks on their chosen field through actual job training under the supervision of tenured staff. An apprentice's duties include performing administrative tasks as needed, creating observation reports of daily operations, providing possible recommendations on improving productivity, and adhering to the business' safety standards and regulatory procedures. An apprentice must be detail-oriented, fast-learner, and enthusiastic. An apprentice should also know how to accept constructive criticisms and feedback to improve performance and skill development.

    In this section, we compare the average low voltage technician annual salary with that of an apprentice. Typically, apprentices earn a $2,498 lower salary than low voltage technicians earn annually.

    While their salaries may differ, one common ground between low voltage technicians and apprentices are a few of the skills required in each craft. In both careers, employees bring forth skills like electrical systems, hvac, and fire alarm systems.

    As far as similarities go, this is where it ends because a low voltage technician responsibility requires skills such as "hand tools," "cctv," "patch panels," and "ladders." Whereas a apprentice is skilled in "pet," "customer service," "basic math," and "apprenticeship." So if you're looking for what truly separates the two careers, you've found it.

    Apprentices receive the highest salaries in the transportation industry coming in with an average yearly salary of $44,876. But low voltage technicians are paid more in the technology industry with an average salary of $46,465.

    Apprentices tend to reach similar levels of education than low voltage technicians. In fact, apprentices are 2.5% more likely to graduate with a Master's Degree and 0.2% more likely to have a Doctoral Degree.

    What Are The Duties Of a Wireman?

    A commercial electrician is different from an industrial electrician since both perform in different environments and have distinct training. Commercial electricians are responsible for ensuring that the electrical components and wiring of the structure are working safely and efficiently. They commonly work on basic electrical installations and repairs of particular equipment. On the other hand, industrial electricians have more specialized and extensive education. Their duties require them to have an in-depth knowledge of their field since accuracy is very crucial in their line of work. They may operate issues relating to extraordinary high voltage systems and micro-control currents of electricity.

    Now we're going to look at the wireman profession. On average, wiremen earn a $7,798 lower salary than low voltage technicians a year.

    While the salary may be different for these job positions, there is one similarity and that's a few of the skills needed to perform certain duties. We used info from lots of resumes to find that both low voltage technicians and wiremen are known to have skills such as "hand tools," "control systems," and "switches. "

    In addition to the difference in salary, there are some other key differences that are worth noting. For example, low voltage technician responsibilities are more likely to require skills like "cctv," "patch panels," "ladders," and "security systems." Meanwhile, a wireman might be skilled in areas such as "work ethic," "electrical conduit," "transformers," and "safety standards." These differences highlight just how different the day-to-day in each role looks.

    When it comes to the differences in education between the two professions, wiremen tend to reach similar levels of education than low voltage technicians. In fact, they're 0.2% less likely to graduate with a Master's Degree and 0.2% less likely to earn a Doctoral Degree.

    How an Electrician Assistant Compares

    The electrician assistant profession generally makes a higher amount of money when compared to the average salary of low voltage technicians. The difference in salaries is electrician assistants making $12,058 higher than low voltage technicians.

    Using low voltage technicians and electrician assistants resumes, we found that both professions have similar skills such as "security systems," "switches," and "electrical systems," but the other skills required are very different.

    There are many key differences between these two careers as shown by resumes from each profession. Some of those differences include the skills required to complete responsibilities within each role. As an example of this, a low voltage technician is likely to be skilled in "hand tools," "cctv," "patch panels," and "ladders," while a typical electrician assistant is skilled in "light fixtures," "electrical components," "electrical outlets," and "defective electrical equipment."

    When it comes to education, electrician assistants tend to earn similar education levels than low voltage technicians. In fact, they're 0.5% more likely to earn a Master's Degree, and 0.1% more likely to graduate with a Doctoral Degree.

    Description Of a Commercial And Industrial Electrician

    The fourth career we look at typically earns higher pay than low voltage technicians. On average, commercial and industrial electricians earn a difference of $6,735 higher per year.

    While their salaries may vary, low voltage technicians and commercial and industrial electricians both use similar skills to perform their jobs. Resumes from both professions include skills like "hand tools," "ladders," and "security systems. "

    While some skills are shared by these professions, there are some differences to note. "cctv," "patch panels," "structured cabling," and "cat6" are skills that have shown up on low voltage technicians resumes. Additionally, commercial and industrial electrician uses skills like run conduit, work ethic, electrical components, and electrical equipment on their resumes.

    Commercial and industrial electricians earn a higher salary in the construction industry with an average of $48,295. Whereas, low voltage technicians earn the highest salary in the technology industry.

    Commercial and industrial electricians reach similar levels of education when compared to low voltage technicians. The difference is that they're 1.4% more likely to earn a Master's Degree more, and 0.1% less likely to graduate with a Doctoral Degree.