Lube technician jobs in Puerto Rico

The General Service Technician must have a mechanical aptitude and is able to perform basic automotive services including mounting and balancing tires, tire repairs, oil changes, vehicle inspections and other less technical services while delivering an excellent customer experience. Responsible also to maintain clean and safe work areas in the tire and service department. The General Service Technician may be required to provide advice to and sell customers on automotive services and repairs that are recommended or required for their vehicle. Duties & Responsibilities Learn how to diagnose and repair basic automotive including brakes, alignments, suspensions, cooling and electrical Continuously learn new technical information and techniques in formal training sessions in order to stay abreast with rapidly changing automotive technology Change engine oil and filter Install and perform tire maintenance Install batteries and check starting / charging systems Install headlights and other small bulbs Repair flat tires Install wiper blades Stock and unload tires Assist fellow technicians/mechanics in performing technical activities Keep store management aware of mechanical repair problems as they occur Clean and maintain an organized and neat shop Adhere to all company policy, procedure, safety and environmental rules Knowledge, Skills, and Abilities A valid driver's license Passion for career as a Technician in the automotive industry Eager to learn and competitive drive to succeed Must be at least 18 years of age High School Diploma or GED Availability to work days, nights, holidays, and weekends as needed Successful completion of pre-employment background check Physical Demands/Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Physical Demands Extensive standing, walking, pushing and reaching. Need full range of motion for reaching, bending and stooping. Repetitive movement of hands, arms, legs. May drive a vehicle if needed. Frequent lifting of heavy equipment >100 pounds is required. May work outside and be exposed to weather. Exposure to adverse weather conditions, chemicals, odors, dirt and dust. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The noise level in the work environment is usually moderate. Benefits Medical, dental, and vision benefits Life insurance Short Term Disability Supplemental benefits 401(k) with company match PTO and holiday pay On-demand pay partner (DailyPay) Reduced benefits available for part-time team members Pay Range $10.50 to $16.20 per hour based on experience All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Immediately hiring a Permanent Full Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in TOA BAJA, Puerto Rico For More Info Call Alondra or Text "Toa Baja" to ************** Hear it from a Ryder Technician Employee Here: *************************************** Hourly Pay: $23.00 per hour Certification Bonus of $100 for each New ASE Certification Obtained up to $700 Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year Schedule: Monday-Saturday One day off during the week Hours: Second Shift 2:30 pm - 11:30 pm We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles. Apply Here with Ryder Today For More Info Call Rachel or Text "Toa Baja" to ************** We have all the benefits other shops do without the wait! Annual Merit Pay Increases Every Year On the Job Paid Training Medical, Dental, Vision, 401 K etc. Start at 30 Days We love our Ryder babies and offer 12 weeks of PAID Maternity Leave for qualifying employees (eligibility requirements, including work tenure, apply) Paid Time Off Starts Accruing at DAY ONE with 80 hours per year Additional Day Off for U.S. Military Veterans 401 K offers a company match HIGH VALUED Stock at 15 % Employee Discount PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000! Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today! For More Info Call Rachel or Text "Toa Baja" to ************** Click Here to See All Ryder Careers: ************************************************ We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more! EEO/AA/Female/Minority/Disabled/Veteran Requirements High school diploma or equivalent preferred Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred Basic tools, required Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including: Routine preventative maintenance, which should include oil changes, brake and tire work, required Two (2) years or more of a combination of classroom training and work experience in required experience, preferred Valid Commercial Driver License (CDL) CLASS A, preferred This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must: Must be able to obtain CDL within 6 months after hire Pass a Ryder Drug Test Pass a DOT physical Pass a Ryder road test Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities Performs vehicle maintenance and repair duties Performs standard vehicle maintenance Performs standard component inspections and repairs Performs preventive maintenance Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable Identifies root cause of basic failures/conditions and perform repairs as required Replaces defective components as instructed Performs facility maintenance duties Interacts with customers/drivers to properly determine nature of complaint once assigned a task Utilizes key functions of Shop Management System and electronic documentation available Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT) Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

At IPS, we're all about exceptional service and exceptional people. We're looking for a passionate In-Shop Technician who loves hands-on work, takes pride in their craft, and wants to have a meaningful impact. As an In-Shop Technician, every day will be different. You'll get to apply your knowledge and skills to solve complex problems and help critical industries keep their equipment running. As a company, we prioritize safety in everything we do and offer opportunities for growth, job longevity, and continuous improvement. If you're looking for a role that values your skills and dedication, IPS is where you'll thrive. Responsibilities and Expectations: We are looking for a talented Mechanic to join our team. As a Mechanic for IPS you will apply innovative, analytical, and problem-solving skills, strong attention to detail and customer focus to repair industrial AC/DC electric motors, generators, gearboxes, and related equipment while supporting our continuous improvement process culture. Responsibilities may include: * Diagnose incoming units, disassemble, repair, assemble, and prepare items for shipment * Perform mechanical rebuilds on rotating apparatus repairs like electric motors, pumps, and fans * Measure and record data using tables, dial indicators, micrometers, and vibration meters * Use multi-meters, meggers, and Baker instruments, and measure winding resistance, RTD and heater resistances, and mechanical fits and clearances * Participate in daily operations discussions on customer products Qualifications and Competencies: * 1-5 years of AC/DC motor experience preferred * Able to perform basic math functions * Capability to diagnose and repair industrial electric motors, fans, pumps, gearboxes, and other rotating equipment * Able to understand, perform, and retain various job-related training, operational, and safety procedures * Excellent technical and mechanical skills * Self-starter and highly motivated person You'll thrive at IPS if you… * Lead with integrity and prioritize safety. You demonstrate high standards and commit to a safe, ethical workplace. * Value teamwork and accountability. You work well with others, take responsibility, serve others, and deliver on your commitments. * Focus on the customer. You are dedicated to providing an unmatched customer experience and exceeding expectations. * Have an entrepreneurial spirit. You're proactive, innovative, and thrive in a fast-paced environment. * Communicate effectively and with purpose. You keep everyone informed with clear, concise communication. * Stay curious and love to learn. You continuously seek new knowledge and grow personally and professionally. Who We Are: At Integrated Power Services (IPS), we're committed to empowering you to make a meaningful impact. As the industry's leading and fastest-growing service provider, IPS offers single-source electromechanical and power management solutions to enhance the reliability of critical infrastructure across North America and the United Kingdom. We serve over 30,000 essential customer locations, from renewable energy pioneers to hospitals, manufacturers, and municipalities, helping them avoid costly downtime and ensure mission-critical operations. When you join IPS, you're joining a team that's revolutionizing equipment and process reliability across diverse sectors, from power generation to petrochemicals, and beyond. You'll learn from industry experts, grow alongside a talented workforce, and be part of a company that is built on the Shared Values of Safety, Integrity, Teamwork, Accountability, Customer Focus, and Entrepreneurial Spirit. Benefits: * Paid Time Off * 401k Employer Match * On-the-job Training * Tuition Reimbursement Program * Medical, Dental, and Vision plans * Safety shoe & glasses reimbursement * And more! IPS is committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, or veteran status. Any offer of employment is contingent upon the successful completion of a background and driving record investigation. As a federal contractor, our company is committed to maintaining a safe and drug-free workplace. Candidates for this position are required to complete a pre-employment drug screen successfully. The drug screening process will include testing for substances that may impair one's ability to perform the job safely and effectively. #LI-RC1

Job Description We are committed to providing a stable, growth-oriented and inspiring work environment that offers opportunities for professional, personal and financial growth. If you are interested in joining a growing team, where YOU are our most valuable asset, then MAC is the place for you. A&P Mechanic: Responsible for inspection, troubleshooting and repair of aircraft to meet company, FAA and customer standards. This includes: RESPONSIBILITIES/ DUTIES: -Fully analyzes all required blueprints, drawings, work orders and sketches in order to troubleshoot, repair and install desired product or part. Is able to detect errors and correct through proper departmental channels -Schedules items through the shop to maintain on-time deliveries - Checks all mechanical components prior to installation to prevent damage - Accurately estimates hours and materials for scheduled jobs - Ability to operate all required ground support equipment QUALIFICATIONS: - Extensive knowledge of all aircraft mechanical systems functions and interactions - Thorough working knowledge of all current FAA Regulations - Thorough working knowledge and use of MM, IPC, SRM and other manufacturers repair and troubleshooting documents - Thorough working knowledge of blueprints, work orders and task cards to determine type of configuration and special instructions prior to installation - Extensive knowledge of aircraft accessories, components and other hardware - Comprehensive knowledge of estimating hours and materials for completing projects - Complete knowledge of aircraft fasteners and applications - Complete knowledge of all related skill area machines, equipment and hand tools - Ability to install and rig aircraft flight control surfaces - Ability to operate aircraft systems - Ability to do engine "run-up" and "trim engines" SPECIAL POSITION REQUIREMENTS: - Wear appropriate PPE as designated in each work area (e.g. safety glasses, etc.) - High School diploma or equivalent - Airframe and Power Plant License - Must have a good command of the English language, both written and verbal - Must possess a valid driver license SUPERVISORY RESPONSIBILITY: None TRAINING REQUIREMENTS: - General Safety - Quality System Awareness WORKING CONDITIONS AND PHYSICAL EFFORT: - Heavy physical effort required on occasion - Continuous mental and visual attention required - Employees may be subject to random drug and alcohol testing under FAA regulations - Work performed in a shop environment on a regular basis - Occasional travel to line stations - Exposed to any number of elements but with none present to the extent of being disagreeable - May work at different workstations as needed, and/or shifts from one station \ location to another Mountain Air Cargo, Inc. is an Equal Opportunity Employer.

Supports maintenance operations by assisting with basic repairs, lubrication, and preventive maintenance of injection molding machines and auxiliary equipment. Repair and maintains mechanical and hydraulic components of production in accordance with diagrams, sketchers, operations manual and manufacturers specifications, machinery and mechanical equipment. Essential Functions: Install, maintains and repair machinery, equipment and physical structures (pipe, electrical systems, injection molding machines, pressure regulators, thermolators, wiring machines and related activities). Performs preventive maintenance inspections and service on machines. Thoroughly cleans machines and machine pans, removing parts and reinstalling as necessary. Oils and lubricates moving parts on machines to ensure effective performance. Records and reports damaged, worn, or broken parts. Identifies the causes of unexpected breakdowns of machines. Repairs broken machines quickly and efficiently. Prepares reports documenting work performed. Cleans, organizes, inventories, stocks, and otherwise maintains areas, parts, tools, and supplies. Makes necessary modifications and implements tests runs; confers with product manager regarding test results and makes additional alterations to machinery as required. Reads and follow specification blue prints, manuals and schematic drawing. Perform preventive maintenance of equipment's according to the needs (lubricates, grease, cleaning, etc.) Performs any work-related duty assigned by immediate supervisor. Clean work area during shift and before shift change. Follow all safety policies and procedures. Live Viant core values. Qualifications: Diploma in technical course or associate degree technical-electrical highly desirable. English/Spanish reading and understanding. 2-10 years on related fields, preferred industrial pharmaceutical field. Technical knowledge to effectively troubleshoot, repair and maintain complex production and facility equipment. Effective problem-solving abilities to solve complex equipment malfunctions and maintenance challenges. Attention to detail to ensure accuracy and precision on maintenance task. Safety awareness skills to ensure well-being protect equipment integrity and prevent accidents or injuries. Ability to add, subtract, multiply and divide.

The Fleet Mechanic is responsible for the comprehensive maintenance, repair, and troubleshooting of our diverse fleet, encompassing trucks, trailers, and both light and heavy-duty equipment. This role ensures the operational readiness and safety of all company vehicles and equipment, contributing directly to the efficiency and success of our operations. Key Responsibilities Maintenance and Repair: Diagnose and repair intricate mechanical, electrical, and hydraulic systems across a wide range of fleet vehicles and equipment, including trucks, trailers, skid steers, excavators, loaders, and various specialized landscaping machines. Perform routine and preventative maintenance, adhering to established schedules and industry best practices, including oil changes, filter replacements, brake repairs, and tire services. Conduct thorough inspections of vehicles and equipment to identify potential issues and ensure compliance with safety and regulatory standards. Maintain and repair heavy-duty equipment, including hydraulic systems, diesel engines, and complex electrical systems. Perform welding and fabrication repairs as needed to maintain equipment integrity. Service and repair company trucks and trailers, ensuring roadworthiness and compliance with DOT regulations. Maintain and repair trailer systems, including electrical, braking, and suspension components. Troubleshooting: Utilize advanced diagnostic tools and software to identify and resolve complex mechanical and electrical problems. Interpret technical manuals, schematics, and diagrams to facilitate effective repairs. Inspections and Compliance: Perform vehicle and equipment inspections in accordance with DOT, OSHA, and company safety standards. Ensure compliance with all applicable safety regulations and environmental standards. Inventory and Parts Management: Maintain an organized inventory of parts and supplies, ensuring timely availability for repairs. Source and order parts as needed, managing inventory levels and optimizing cost-effectiveness. Maintain accurate inventory records. Ensure proper storage and handling of parts and tools. Record Keeping: Maintain detailed and accurate records of all maintenance and repair activities within company software. Document parts used, labor hours, and repair procedures. Keep service records up-to-date. Safety: Adhere to all safety protocols and procedures, ensuring a safe working environment. Maintain a clean and organized work area. Properly handle and dispose of hazardous materials. Seasonal Snow Removal: Available to be on call for snow removal. Please help with snow removal duties (shoveling, plowing, salt/sand application) during the winter months as needed. All Other Duties As Assigned Skills and Qualifications Proven experience as a Fleet Mechanic with a strong background in both light and heavy-duty equipment maintenance and repair. 3 years of diesel experience and extensive knowledge of diesel engines, hydraulic systems, electrical systems, and vehicle maintenance. Proficiency in using diagnostic tools and software. Strong understanding of DOT, OSHA, and other relevant regulations. Welding and fabrication skills. Valid driver's license. Ability to read and interpret technical manuals and schematics. Physical Requirements Ability to lift 50 lbs or more, stand for extended periods, and perform repetitive tasks. Comfortable working outdoors in various conditions, including heat, cold, and rain. Availability Requirements Monday-Friday, 6:30 AM - 4:30 PM weekends and extended hours as needed Our Values As a team member, you play a vital role in upholding our company values. Your commitment to continuous growth and resilience ensures we tackle challenges with grit and determination. By acting with integrity, you help us consistently choose the right path, even when its the hardest. Your collaboration strengthens our team, lifting others up, and driving us to achieve more together. Attention to detail in your work builds the foundation for excellence, one step at a time. Above all, you contribute to fostering relationshipsbuilding trust, respect, and lasting connections that define who we are. Compensation details: 25.5-26 Hourly Wage PIe2ac58f8bdf6-31181-38483245

General Description Will be responsible for performing HVAC equipment preventive maintenance, including troubleshooting & diagnostics, equipment & systems operation log and reports, with minimum supervision, on customers' sites within Puerto Rico and the USVI. Specific Description * Preventive Maintenance of industrial and commercial HVAC systems, including electrical, mechanical and control maintenance works associated with it. * Inspect, operate, or test machinery or equipment to diagnose machine malfunctions. * Dismantle machines, equipment, or devices to access and remove defective parts, using hoists, cranes, hand tools, or power tools. * Perform routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions. * Capacity to drive to customers' sites all over PR and mobility to travel to customers sites in the USVI. * Diagnostic & Corrective Repair of industrial and commercial HVAC equipment, including electrical, mechanical and control works associated with it. * Evaluation and report of HVAC equipment and systems operation performance. * Keeps tools, equipment and personal protection items in excellent conditions by using them correctly and providing proper maintenance according to the fabricant. * Work with compressors, condensers, evaporators, motors, expansion and discharge valves, temperature, humidity controls, fans, control panels, switches, fuses, filters, gauges, ducts, piping, tubing, and related HVAC components to have equipment operating in excellent conditions. * Documentation of every step of the procedures worked out in the execution of repairs, maintenance and / or occasional retrofit installations. Compliance with EH&S, OSHA and EPA rules & regulations applicable in the HVAC Service business and compliance with the company policies. Education: High School Diploma Minimum: Refrigeration Technical Course Experience (Similar position): 2 years minimum Languages: Fluent in Spanish. Conversational English required Excellent Grammar in Spanish Able to read in English Computer Skills: Basic Knowledge and experience using computers Basic Knowledge in Outlook (preferred) Special Requirements: Valid Driver's License Other Skills: Adaptability Listening capabilities Communication Skills Customer Focus Forward Thinking Teamwork Oriented Attention to detail Talent Development Skill

Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you've got a strong mechanical aptitude and a history of exceptional performance, you'll thrive as a member of our team. A MECHANIC'S DAY-TO-DAY: * Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA. * You are responsible for keeping the center equipment in full working order. * Fully understand how to operate all bowling equipment in the center * Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed. * Take charge and ensure the shop and machine area is clean and organized. * Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: * At least 1 year of Mechanical experience * High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional) * Excellent communication skills * Ability to train new mechanics * Availability to work nights, weekends, holidays, and extended workdays * Proven team player PERKS (MORE REASONS YOU'LL LOVE YOUR JOB) * Free Bowling! * $1 Arcade Play * 20% off Events * 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS: * Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: * Evening shift * Night shift Weekly day range: * Weekend availability Work Location: One location Who We Are Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world's premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: ************************************

Join Cape Air's team of aircraft maintenance technicians. We offer flexible schedules, generous travel incentive pay, competitive benefits, and new compensation scales. You will gain a broad range of experience maintaining our large fleet of multi-engine cabin class aircraft in some of the country's most desirable locations. PRIMARY RESPONSIBILITIES: Familiar with the policies and procedures contained in company manuals submits changes as appropriate to eliminate conflicts and/or enhance operational effectiveness Comply with 14 CFR (as applicable), manufacturer's specifications, company policies, and procedures, as well as other methods accepted by the FAA, when accomplishing maintenance Performs aircraft inspection and maintenance in accordance OEM data/specifications and company procedures Proficient in the understanding and application of the policies and procedures contained in company manuals, Federal regulation, and industry best practices Perform aircraft run-ups and taxis Documents work performed within web-based maintenance tracking system Participates in required company training events (computer-based, classroom and OJT) Participates in shift meetings and briefings Maintains a clean and professional work environment Possibly travel TDY to all maintenance bases for up to three weeks at a time Additional duties as assigned QUALIFICATIONS: Current A&P certificate required Ability to work independently and adapt to changing work priorities Must meet the recent experience requirements as stated in 14 CFR 65.83 Sharp attention to detail Must be able to lift 40 lbs Must be able to perform moderately strenuous physical tasks which include bending, stooping, kneeling, and working overhead for long periods of time Must hold a valid US driver's license Must have a high school diploma or equivalent Must have a flexible schedule and be able to travel, work any shift including nights, weekends, and holidays Must exhibit exceptional knowledge of Cape Air and embody the Cape Air MOCHA HAGoTDI spirit Please note this is a safety-sensitive position that requires CHRC clearance and DATP enrollment in accordance with the FAA Code of Federal Regulations

General Description Will be responsible for performing HVAC equipment preventive maintenance, including troubleshooting & diagnostics, equipment & systems operation log and reports, with minimum supervision, on customers' sites within Puerto Rico and the USVI. Specific Description Preventive Maintenance of industrial and commercial HVAC systems, including electrical, mechanical and control maintenance works associated with it. Inspect, operate, or test machinery or equipment to diagnose machine malfunctions. Dismantle machines, equipment, or devices to access and remove defective parts, using hoists, cranes, hand tools, or power tools. Perform routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions. Capacity to drive to customers' sites all over PR and mobility to travel to customers sites in the USVI. Diagnostic & Corrective Repair of industrial and commercial HVAC equipment, including electrical, mechanical and control works associated with it. Evaluation and report of HVAC equipment and systems operation performance. Keeps tools, equipment and personal protection items in excellent conditions by using them correctly and providing proper maintenance according to the fabricant. Work with compressors, condensers, evaporators, motors, expansion and discharge valves, temperature, humidity controls, fans, control panels, switches, fuses, filters, gauges, ducts, piping, tubing, and related HVAC components to have equipment operating in excellent conditions. Documentation of every step of the procedures worked out in the execution of repairs, maintenance and / or occasional retrofit installations. Compliance with EH&S, OSHA and EPA rules & regulations applicable in the HVAC Service business and compliance with the company policies.

General Description Will be responsible for performing HVAC equipment preventive maintenance, including troubleshooting & diagnostics, equipment & systems operation log and reports, with minimum supervision, on customers' sites within Puerto Rico and the USVI. Specific Description Preventive Maintenance of industrial and commercial HVAC systems, including electrical, mechanical and control maintenance works associated with it. Inspect, operate, or test machinery or equipment to diagnose machine malfunctions. Dismantle machines, equipment, or devices to access and remove defective parts, using hoists, cranes, hand tools, or power tools. Perform routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions. Capacity to drive to customers' sites all over PR and mobility to travel to customers sites in the USVI. Diagnostic & Corrective Repair of industrial and commercial HVAC equipment, including electrical, mechanical and control works associated with it. Evaluation and report of HVAC equipment and systems operation performance. Keeps tools, equipment and personal protection items in excellent conditions by using them correctly and providing proper maintenance according to the fabricant. Work with compressors, condensers, evaporators, motors, expansion and discharge valves, temperature, humidity controls, fans, control panels, switches, fuses, filters, gauges, ducts, piping, tubing, and related HVAC components to have equipment operating in excellent conditions. Documentation of every step of the procedures worked out in the execution of repairs, maintenance and / or occasional retrofit installations. Compliance with EH&S, OSHA and EPA rules & regulations applicable in the HVAC Service business and compliance with the company policies.

Airframe/Powerplant Mechanic Under general supervision the A&P Mechanic is responsible for the maintenance, modification and servicing of aircraft and aircraft components in accordance with manufacturer's specification and FARS. JOB ACCOUNTABILITIES The following are essential job accountabilities: Perform routine scheduled maintenance and inspection of aircraft in accordance with ACC's and current manufacturers specifications. Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damages components. Modifies aircraft systems or components following drawings, engineering orders and technical publications. Assemble and install electrical, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools. Provide emergency/unscheduled repairs to minimize aircraft downtime. Requires ability to travel. Review maintenance records and flight logs to schedule prescribed maintenance checks and overhauls. Process all necessary documentation and paperwork for processes completed including OJT. Follow all clean up and housekeeping procedures. Comply with all quality, safety and sanitation regulations. Education Requirements JOB SPECIFICATIONS Minimum Education: High School Diploma or equivalent Preferred Education: One to two years technical college/training or equivalent Certifications/Licenses: FAA Airframe and Powerplant Experience Requirements Skills: Interpret drawings, specifications, and schematics of aircraft parts/components Problem-solving and independent decision-making skills Good communication skills Exercise good judgment in working with people in a team environment as well as in aircraft maintenance and safety Machine Skills: Operate hand and power tools Calculator, PC, telephone, and fax machine Qualifications Environmental Conditions: Exposure to weather. Work may be performed out of doors Physical Demands: Ability to climb ladders, sit stand crouch bend for extended periods Physical Strength: Vision Requirements: Accommodation: ability to adjust vision to bring objects into focus Communication: Communicate effectively with others in the work environment and external customers Representation: Represent the company in a professional and positive manner Contacts: Exchange information with employees and external customers The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an all inclusive list of all responsibilities and skills required for the position. Nothing in this job description restricts Management's right to assign or reassign duties and responsibilities. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, including sexual orientation and gender identity or expression, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you've got a strong mechanical aptitude and a history of exceptional performance, you'll thrive as a member of our team. A MECHANIC'S DAY-TO-DAY: Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA. You are responsible for keeping the center equipment in full working order. Fully understand how to operate all bowling equipment in the center Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed. Take charge and ensure the shop and machine area is clean and organized. Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: At least 1 year of Mechanical experience High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional) Excellent communication skills Ability to train new mechanics Availability to work nights, weekends, holidays, and extended workdays Proven team player PERKS (MORE REASONS YOU'LL LOVE YOUR JOB) Free Bowling! $1 Arcade Play 20% off Events 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS: Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: Evening shift Night shift Weekly day range: Weekend availability Work Location: One location Who We Are Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world's premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: ************************************

LUMA - Built for Puerto Rico We rely on electricity every day. We need it to run our appliances, power the streetlights and produce the goods and services that drive our economy. At LUMA we are committed to provide Puerto Rico with electricity that we all can depend on. At LUMA, we put people first - our employees, our customers and the communities where we live and work. We encourage and inspire our people to embrace opportunities as they work to build an electricity system that will make Puerto Rico a better place. If you're looking for a career where you can make a tangible difference in the lives of your neighbors and your community, LUMA is the place for you. LUMA offers new jobs designed to respond to the current and future needs of the T&D system. Together we're transforming the island's electric transmission and distribution system, and energizing Puerto Rico. Please note that these new jobs with LUMA offer different terms and conditions of employment to those currently in place with PREPA. We will schedule interviews with all qualified PREPA candidates. All PREPA applicants will receive priority in hiring and a compensation package equal to or better than what they receive today. In order to receive notifications as additional positions and locations are posted, please create a profile on our career site. About the Position Responsible for the onsite maintenance needed to keep equipment operating in the field. The Field Mechanic applies automotive mechanics knowledge related to the inspection, maintenance and repair of vehicles and special equipment all while working in a field environment. Receive instructions from the supervisor, and performs work to making sure it conforms to established regulations and procedures. Must be an A or B level professional mechanic with a solid knowledge and background in a wide variety of skills. These skills include, but are not limited to, equipment service and repair of Mobile Hydraulics, Aerial Hydraulics, OSHA Boom Inspections, BIT Biennial inspections of terminals, Air Brakes, Diesel and Gasoline powered vehicles and equipment. What will you get up to everyday? Field Mechanic is responsible for the maintenance and repair of company owned, electric utility-related vehicles (service, construction, transport and passenger vehicles) and various types of equipment Diagnostics - Conducts visual, auditory and operational inspection of vehicles and equipment to identify and troubleshoot problems for repair; identifies problem causes; researches problems via repair manuals, schematics, OEM's, service bulletins and other mechanics, as needed Repairs / Rebuilds Vehicles & Components - Uses hand tools and power tools to disassemble, access and re-assemble equipment or components; removes and replaces broken or worn parts (such as cylinders, brakes and gaskets); performs tune-ups and electrical repairs Uses power and hand tools to access, remove and/or replace worn or broken parts Changes oil and filters; cleans and lubricates moving parts; identifies worn parts for preventative repair work Inspect, maintain and repair vehicles and special equipment installed in said units Complete all A & B Level Mechanics duties that are applicable in a field environment. Experience with Microsoft Office programs, and ability to use a FMIS Fleet Management Information System to input and research maintenance history information as needed Good Welding and Fabricating skills. Ability to read and interpret schematics and blueprints Self starter and detail oriented individual Follow all policies and procedures Other duties as assigned Perform major storm restoration work and associated drills as assigned What We are Hoping You Bring to LUMA LUMA's culture is rooted in the concept of People First, Safety Always. We want your knowledge and expertise to pair with LUMA's globally recognized experts in numerous fields such as customer service, field workforce development, high-voltage transmission engineering, distributed energy resources and mini/micro grid integration. Our employees receive substantial training and development, as well as opportunities for advancement and success. Within our People First, Safety Always culture, we're committed to offering continuous learning opportunities and career-long support for our employees. Education Highschool Diploma or GED Experience Have a Category 8-9 CDL license to drive heavy vehicles. Be a member of the College of Automotive Technicians and Mechanics of Puerto Rico Preferred Experience: Self-starter Detail oriented Computer literate Welding and Fabricating skills Ability to read and interpret schematics and blueprints Have seven years of experience in the tasks performed at the Gasoline or Diesel Mechanic level. Licenses/Certifications Hold a Gasoline or Diesel Automotive Technician's license issued by the Puerto Rico Automotive Technician Examining Board. Hold an HVAC Certification Hold a Fluid Power Hydraulics Certification. ASE Certification (T-series 1-8) More Details on what to expect with this position at LUMA space Travel Requirements 100% Physical Demands Stationary Position: Frequently Pushing/ Pulling/ Reaching: Constantly Climb: Constantly Kneel: Constantly Grab: Constantly Bend: Constantly Lift/ Carry over: 31-50 LBS Vision: Vision acuity to operate vehicle Hearing: Understanding sounds required for operating vehicle Working Conditions Wet or humid: Constantly Working near or on moving mechanical parts: Constantly Working near or on heavy machinery: Constantly Working in high places: N/A Exposed to fumes or airborne particles: Seldom Exposed to toxic or caustic chemicals: Seldom Frequency of working in outdoor weather conditions: Constantly Work with electricity: N/A Work with explosives: N/A Work on or near a source of radiation: N/A Loud Noise conditions (abover 87 db): Frequently Other environmental factors including weather conditions: Other: We are looking forward to seeing your application! You made it to the end of the job posting! Thank you for expressing interest in LUMA and taking the time to read all the details of this position. We encourage you to apply and give us the opportunity to get to know you better through the recruitment process. Together, we're energizing the people of Puerto Rico. Note: this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, working conditions, physical demands, and activities may change or new ones may be assigned at any time with or without notice. LUMA provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Bajo la supervisión o persona designada, coordina y realiza trabajos de imprenta para darle apoyo a las áreas de manufactura y las áreas de servicio. Esta posición apoya a múltiples departamentos en la asistencia a las plantas de producción de manera necesaria para maximizar la velocidad y la producción. A Day In The Life * Responsable por utilizar y cuidar el equipo de protección personal y/o artefactos de seguridad instalados en maquinaria manual y/o semiautomática, según indicado por Seguridad Ocupacional. * Notifica al Supervisor o persona designada sobre todo equipo averiado y cualquier situación que pueda representar en el área de trabajo . * Responsable por la calidad de su trabajo. Mientras realiza su trabajo debe inspeccionar que esté conforme a los requisitos de calidad establecidos. * Responsable de cumplir a tiempo con la cantidad de trabajo requerido de acuerdo con la orden de trabajo ("Job Order"). * Notifica al Supervisor o persona designada sobre problemas con el material, equipo, maquinaria o herramientas que estén afectando o puedan afectar adversamente la calidad y cantidad del trabajo. * Las ordenes de trabajos ("Job Orders") son recibidas, analizadas, impresas y reportadas en producción (SAP) en coordinación con el Supervisor. * Realiza terminaciones tales como: numerar, pegar, cortar, compaginar, grapar, etc. * Mantener Registros de planos, arte y data "back-up" actualizados de acuerdo con las revisiones estipuladas por Ingeniería y Diseño de Manufactura. * Mientras ayuda en la ejecución de los trabajos, debe de inspeccionar de forma aleatoria toda producción, captando cualquier imperfección y/o defectos. * Responsable que todos los materiales y equipos necesarios estén configurados para ejecutar el trabajo antes de comenzar operaciones. * Realiza otras tareas relacionadas dentro del área de trabajo, según instrucciones del Supervisor o persona designada. What will help you thrive in this role? * Cuarto año de Escuela Superior. * Saber leer, escribir y seguir instrucciones. * Conocimiento básico en Sistema de "Windows" ("Excel", "Word", Power Point", "PDF", "Outlook"). * Dos (2) a tres (3) años de experiencia en operación de maquinaria en taller de imprenta. * Requiere estar de pie por periodos prolongados de tiempo, acarreo de material, agacharse, agarrar, sentarse, levantar hasta un máximo de 35 libras. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Electrical Solutions Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. HES provides the critical components that allow operators of buildings, factories and other industrial infrastructure to connect, protect, wire and manage power. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Adecco está colaborando con un cliente, ubicado en Cataño en el proceso de reclutamiento para la posición de Mantenimiento. Esta es una oportunidad de asignación "Temp to Hire". **Detalles de la posición:** Días de trabajo: Lunes a Viernes Horario de trabajo: 7:00 am a 4:00pm Salario: $ 10.50 Habilidades y experiencia Limpieza de máquinas Industiales Capacidad de esfuerzo físico Cumples con los requisitos? **Solicita ahora** Envía tu resume a **yolymar.marrerogarcia@** **adeccona.com** para ser considerado/a para esta vacante o cualquier otra para la que cualifiques.Persona para trabajo fuerte **Pay Details:** $10.50 per hour Benefit offerings available for our associates include short-term disability and additional voluntary benefits including medical, dental, vision, life insurance, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave and Vacation Leave or any other paid leave required by Federal, State, or local law where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ********************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance

Job Description The Kitchen & Gas Mechanic Technician is responsible for the maintenance, repair, and installation of all commercial kitchen appliances and gas-operated systems. This includes cooking ranges, fryers, ovens, steamers, and related infrastructure. The technician ensures all work is completed safely, efficiently, and in compliance with local codes and hotel standards. Education & Experience: • Technical certification or trade school diploma in mechanical, gas fitting, or electrical fields. • Minimum 2-3 years of experience with gas and kitchen equipment in a commercial or hospitality setting. • Any license or training related to gas operation equipment will be helpful. • Valid seminar or certification related to gas equipment. • Strong knowledge of gas safety codes, kitchen systems, and mechanical troubleshooting. • HVAC, plumbing and electrical system Knowledge. Skills & Competencies • Excellent communication and teamwork abilities. • Ability to read blueprints, technical drawings, schematics and technical manuals. • Strong troubleshooting and diagnostic skills. • Strong problem-solving skills and attention to detail. Physical requirements: • Frequent standing, walking, bending, kneeling, and crouching throughout the shift. • Manual dexterity and hand-eye coordination to use tools and equipment safely and effectively. • Ability to tolerate exposure to varying environments, including heat and humidity. • Capable of working in confined spaces. • Flexibility to work varying shifts, including nights, weekends, holidays, and sometimes long hours. • Heavy work - Exerting in excess of 100 pounds of force occasionally, and/or in excess of 50 pounds of force frequently and/or in excess of 20 pounds constantly to lift, carry, push, pull, or otherwise move objects.

Global Industrial For over 70 years Global Industrial has been an industry leader providing private label and brand name industrial equipment and supplies to businesses throughout North America. We carry over one million industrial, material handling and business products that are sold through our website, corporate sales people and full color catalogs. We are constantly increasing our product offerings to meet the diverse and changing needs of our customers. Our customers include small to large corporations, institutions, government agencies and consumers across North America. Key Responsibilities * Responsible for providing outstanding CUSTOMER SERVICE. * Visually inspects, tests, and listens to machines and equipment to locate causes of malfunctions. * Discusses machine operation variation with customers to diagnose problem and repair machines. * Dismantles machine parts to detect wear, misalignment, or other problems. * Removes and replaces worn or defective parts. * Installs new or repaired parts; clean and lubricates shafts, bearings, gears, belts and other parts of machinery. * Realigns and adjusts components such as spindles and clutches. * Installs and repairs electronic components of machinery of equipment. * Start machines and equipment to test proper operation following repair. * Organize and plan with dispatcher follow-up repairs on equipment when all ordered parts have been received. * Organize with dispatcher scheduled repairs and PM's at similar locations on the same day, as time and location permits. * Organize new service requests with dispatcher in the same working area, as time permits. * Complete timecards accurately and completely throughout the day * Responsible for record keeping and reporting of work orders, parts, supplies ordering, and a daily agenda. * Complete work orders, submit parts orders and all required paperwork through tech portal / ERP System while at each location. * Organize parts received for van stock and follow up customer repairs. * Work efficiently together with dispatcher for most productive route each day. * Treats company equipment (i.e. vehicle, tools, phone, fax, credit card, and parts) as if they were his/her own and follows PM's guidelines on company provided vehicle. * Performs additional duties, tasks, responsibilities, as a supervisor may, from time-to time, deem necessary. * Work safely in different types of environments and always putting SAFETY FIRST. Competencies and skills * High school diploma or general education degree (GED); good mechanical aptitude/skills. * Self-starter with entrepreneurial spirit who operates business within the framework of each customer's business structure. * Good driving record. * Ability to read, write, and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Excellent time-management skills. LANGUAGE SKILLS * Possesses excellent communication skills; both verbal and written with ability to communicate effectively to customers. REASONING ABILITY * Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. * Detail oriented * Excellent listener * Determination to be own manager * Skilled in the use of hand and mechanical tools * Owns or can purchase or borrow basic standard and metric mechanical tools, gear puller, and three-drawer tool chest * Quality Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; monitors own work to ensure quality * Safety and Security Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly * Dependability: * Excellent attendance * Responds to service request in a timely manner - High Sense of Urgency * Follows instructions, responds to management direction * Takes responsibility for own actions * Maintain a valid driver's license and safe driving skills * Must, at all times meet state and federal regulations Physical Demands * While performing the duties of this job, the associate is occasionally required to drive long hours. The associate is regularly required to sit; use hands to finger, handle or feel; reach with hands and arms; stoop, kneel or crouch; talk or hear and taste or smell. * The associate must regularly lift and/or move up to 10 to 50 pounds and frequently lift and/or move up to 100 pounds. * Grease Tank Installers will need ability to move tanks up to 400lbs with hand truck/dolly. * Grease tank installers will need to be able to work on a ladder running overhead piping. * Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT * Travel up to an average of 300 miles per day * Frequent exposure to moving mechanical parts, risk of electrical shock, fumes or airborne particles, and toxic or caustic chemicals. MISCELLANEOUS * Income is based an hourly pay structure, with a ½ hour start of the day and end of the day reduction for commute time. EEO/AA Statement Global Industrial provides equal employment opportunities to all employee and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absences, compensation and training.

As a Light-Wheel Vehicle Mechanic for the Army National Guard you'll ensure that anything that moves on wheels is ready to hit the road. In this role, you will primarily be responsible for supervising and performing maintenance and recovery operations on wheeled vehicles in the field and in the shop. Your duties will include inspecting, servicing, maintaining, repairing, testing, adjusting, and replacing of systems and components; performing recovery operations, and servicing electrical systems; including wiring harness and charging systems. Job Duties * Maintain wheeled vehicles associated trailers and material handling equipment systems * Service automotive electrical systems, including wiring harness, and starting and charging systems Helpful Skills * Interest in troubleshooting and repairing mechanical problems * Interest in automotive engines and how they work Through your training, you will develop the skills and experience to enjoy a civilian career with service stations, auto dealers, farm equipment companies, and state highway agencies. You'll be able to pursue a career as a mechanic who works on carburetors, transmissions, radiators, construction equipment, or endless track vehicles. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training requires 10 weeks of Basic Training, where you'll learn basic Soldiering skills, and 13 weeks of Advanced Individual Training (AIT). Part of this time is spent in the classroom and part in the field.