Machine operator full time jobs - 126 jobs

JOB OVERVIEW: This will involve set up, adjusting, maintaining, and configuring processing equipment according to assigned specifications, and regular communication with production personnel and supervisors and the completion of required paperwork. ESSENTIAL DUTIES AND RESPONSIBILITIES:• Turns on all support equipment necessary to run the facility as needed.• Must do visual inspections and complete documentation during the run to insure defect free work.• Load corrugate, labels, bottles/cans, glue, carriers etc… in appropriate machines.• Performs minor package change-overs on equipment as required, as well as change- over to proper raw material.• Performs preventative maintenance on equipment with regards to cleaning and clearing them of debris and materials.• Assist line mechanics in machinery repair or other tasks as/if needed.• Must insure that all equipment is on and functioning properly prior to starting a run. Air is on, all conveyors are on.• Must do visual inspection of boxes to insure proper box/tray is used and the graphics on the box/tray are acceptable.• Watch flow of materials, i.e. Cans/bottles/boxes/trays, etc… into appropriate machine. Clear jams if necessary.• Must insure proper coding is on the bottle, cans, boxes/trays, and if applicable the graphics are acceptable.• Must insure closures and lids are properly applied.• Verify flavor and size according to schedule.• Report any major defects to the Lead person and/or Manager.• Monitor the machine while running. Check to see that all bottles, cans are packed into the box correctly.• Fill glue pot's as necessary.• Verify case code is correct as scheduled.• Clear your machine of all products at end of each run and at the end of your shift.• Must follow the work rules at all times. GMP compliance MUST be adhered to at all times.• Is responsible to report any quality issue to the Lead person, QA Technician and/or Manager.• Assist in relieving other operators for lunch breaks.• Keep work area clean at all times.• Shut down all equipment at end of shift if line is going down for the day.• Other duties as assigned by Supervisor. LANGUAGE SKILLS: Ability to read, analyze, and interpret common information, reports and other documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or company representatives. Ability to effectively present information to management. PHYSICAL DEMANDS:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to walk, stand for long periods of time, sit and talk or hear. The employee frequently is required to use hands and fingers, to handle, or feel, sit for long periods of time, stand frequently, bend, squat, reach and turn to access files and office equipment. Must be able to lift up to 50 pounds. May be required to push or pull with a dolly or pallet jack up to 500 lbs. WORK ENVIRONMENT:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Field positions will be exposed to various unfamiliar conditions where Personal Protective Equipment (PPE) must be worn and which may include, but are not limited to: manufacturing and warehouse plants, and other venues as directed by supervisor. The noise level in the work environment is usually moderate, but increases significantly in warehouse and manufacturing plants. MINIMUM QUALIFICATIONS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • High School Diploma or GED or equivalent work experience required.• Prior bottling / canning experience a plus.• Must be 18 years or older.• Favorable background and drug test.• Able and willing to work a flexible Full Time schedule that may include weekends and holidays.• Must be able to provide own transportation to various locations in organizational service areas, as required by duties. Shasta Beverages, Inc. provides equal employment opportunities to all applicants for employment without regard to race, color, religion, sex, national origin, age, disability, gender, genetics, gender identity, disabled veterans or sexual orientation.

Our team members are at the heart of everything we do. At Cencora, we are united in our responsibility to create healthier futures, and every person here is essential to us being able to deliver on that purpose. If you want to make a difference at the center of health, come join our innovative company and help us improve the lives of people and animals everywhere. Apply today! Job Details This role is in support of American Health Packaging, a Cencora business offering pharma packaging services in the US $2,000 sign on bonus Pay: 23.85, including shift differential Shift: Sun-Thurs 11pm-7:30am Employment is subject to verification of pre-hire tests, which may include drug screening and background check when permitted by state or local laws. Primary Duties and Responsibilities: * Verify and prepare repackaging material and equipment for production run. * Responsible for packaging machine set up/ changeovers for production runs. This includes following work instructions for equipment set up/ changeovers and following all work standards and SOPs. Is capable at this level to identify and resolve issues during set up and change overs * Responsible for operating packaging equipment, including troubleshooting and making adjustments in accordance with work standards. Responsible for following escalation protocol in a timely manner when troubleshooting efforts fail. * Responsible for repackaging raw material into finished product that are within packaging specifications and meet all quality standards. * Responsible for working alongside of maintenance when escalation to maintenance support is needed for a mechanical issue. * Responsible for production room and equipment cleans/sanitation * Has a thorough understanding of batch record information and using basic mathematical skills, records and prepares accurate and complete information. * Adheres to and operates under 5S principles/guidelines for the promotion of efficient and effective operations. * Responsible for being actively engaged in all technical training, as well as compliance and other training required as a member of the operations team. * Responsible for assisting in training new operators alongside the Operator III - Packaging Machine. * Adheres to all cGMPs, safety regulations and Standard Operating Procedures. * Maintains good housekeeping throughout the shift in the work areas. * Works as a team member with other members of the AHP operations team to meet and/or exceed quality and production goals. * Responsible for being an active participant in continuous improvement activities to promote improved efficiency and effectiveness of the production line. * Work in partnership with supporting areas, such as quality to resolve issues that prevent the operations from achieving its goals. * Performs related duties as assigned. Requirements: Associates degree, completion of vocational program or certification in manufacturing operations or equivalent preferred. Requires completion of a high school diploma, general education degree (GED) or equivalent combination of experience and education. Minimum two (2) years of manufacturing experience required. One (1) year experience in pharmaceutical manufacturing, or other regulated industry, such as FDC regulated industry preferred. * Ability to read, write and understand the English language for reading documents, product labels and instructions. Must have good written skills for accurately completing compliance documentation for production runs. * Must possess basic mathematical skills. * Strong interpersonal skills; ability to develop and maintain cooperative working relationships with others and work in a team-based environment. * Strong organizational skills; detail oriented. * Ability to use good judgment to carry out detailed instructions. * Basic problem-solving capabilities for troubleshooting issues in the production environment. * Experience in 5S principles and practices. * Ability to work overtime when needed What Cencora offers Benefit offerings outside the US may vary by country and will be aligned to local market practice. The eligibility and effective date may differ for some benefits and for team members covered under collective bargaining agreements. Full time Equal Employment Opportunity Cencora is committed to providing equal employment opportunity without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, disability, veteran status or membership in any other class protected by federal, state or local law. The company's continued success depends on the full and effective utilization of qualified individuals. Therefore, harassment is prohibited and all matters related to recruiting, training, compensation, benefits, promotions and transfers comply with equal opportunity principles and are non-discriminatory. Cencora is committed to providing reasonable accommodations to individuals with disabilities during the employment process which are consistent with legal requirements. If you wish to request an accommodation while seeking employment, please call ************ or email ****************. We will make accommodation determinations on a request-by-request basis. Messages and emails regarding anything other than accommodations requests will not be returned Affiliated Companies: Affiliated Companies: AmerisourceBergen Drug Corporation USA > OH > Columbus > John Glenn Hourly 1

Thank you for your interest in PPC Flex. We are a Flexographic printing company, that has been located in the Hilliard Ohio area for over 47+ years. We are looking for experienced machine operators, with a miniumum of two years experience in the maunfacturing or industrial setting. If you are interested please upload your resume when applying. If you meet our qulifications we will contact you for a phone screening. ** FULL TIME ** OPENINGS: 2nd SHIFT (2:45p to 11p, Mon.-Fri.) ** STARTS AT $22 - $24/HR, BASED ON EXPERIENCE **PERFORMANCE BASED PAY RAISES AND BONUS PROGRAM ELIGILBILITY AFTER FIRST 90 DAYS **FULL BENEFITS OFFERED AFTER 45DAYS. MEDICAL, DENTAL, VISION, 401k,LIFE INSURANCE **COME JOIN OUR TEAM!! REQUIRED SKILLS: *Several years (2+) of Machine Operating experience in the Manufacturing or Industrial setting. *Willingness to learn and complete our training program successfully. *Excellent Attendance *Good verbal and written communications skills. *Good with Computer work and understanding Technology. *Attention to detail with a high degree to accuracy. *Effective Team Player WORKING CONDITIONS AND/OR PHYSICAL REQUIREMENTS: *Operate various flexible packaging manufacturing machines. (Laminator, Slitter) *Must be able to lift and ensure proper handling of items up to 75 pounds. *Must have the physical dexterity to bend, stand, flex, and reach as the position dictates. *Work in a Manufacturing environment. *Must be able to distinguish and ensure product quality in a fast-paced production environment. *Follow all machine safety guidelines and company policies. *Follow all job and work instructions. *Must be able to work overtime as needed.

R10082816 2nd Shift Production Associate (Cylinder Handler) (Open) At Airgas, we are committed to building a diverse and inclusive workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world. Pay $22-23 an hour The Cylinder Handler will be responsible for safely handling, loading/unloading, and filling gas products into liquid, medical and high pressure gas cylinders in compliance with federal, state, local regulations, and meeting the standard operating procedures of Airgas. In particular, you will: Loads and unloads gas cylinders and/or other products onto and off of route trucks and trailers moving cylinders with proper carts only. Sorts empty cylinders by type. Rolls cylinders and operates a forklift truck for the movement of cylinders on pallets. Understands hazards of various gases; size and contents of cylinders by reading and interpreting cylinder labels and the color-coding of tanks. Accurately labels cylinders. Handles high-pressure, medical and liquid cylinders. Prepares high pressure cylinders and cryogenic vessels for filling. Attaches to manifold, evacuates cylinders to eliminate all possible contaminants. Performs basic cylinder maintenance such as painting cylinders, labeling cylinders, and cleaning of work area. Inspects cylinders prior to filling, following standard procedures as required by government, Airgas, and distributor standards. Conducts a variety of Safety checks per procedures, such as odor tests, checking caps and valves. Fills cylinders by pressure and weight, per regulations and standards. Checks for cylinder quantities, styles and product, and/or assists with inventory Manages paperwork to DOT, FDA, OSHA, and Airgas standards. Completes quality control sheets as required. Complies with all government and company standards relating to the safe handling of hazardous materials/cylinder gases. Maintains a neat, clean and orderly plant appearance. Other duties as assigned. ________________________Are you a MATCH? To perform this position successfully, an individual must be able to perform each job duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Required Education: HS Diploma or equivalent preferred. Required Length & Type of Experience: Minimum of one year of prior experience in a manufacturing operation, filling or loading experience preferred. Strong background in gas, welding and safety supply industry or chemical industry preferred. Knowledge, Skills & Abilities: Strong verbal and written communication skills. Ability to read and comprehend material safety data sheets. Must be able to work with a wide variety of people with different personalities and backgrounds. Excellent customer service skills. Ability to work independently and under some pressure to meet deadlines. Strong level of attention to detail. Ability to add, subtracts, multiply, and divides in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentages. Ability to safely operate a forklift. Physical Demands: The characteristics listed below are representative of the physical demands required by an individual to successfully perform the essential duties of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Able to talk, walk, sit; use hands to finger, handle or feel objects, tools, or controls; reach with hands and arms; stoop, kneel, crawl or crouch. Specific vision abilities to include close vision, distance vision, color vision, peripheral vision, depth perception and ability to focus objects. Regularly required to stand, bend, stoop, crouch, reach, grasp, feel and talk or hear. Able to smell and hear leaking gas from cylinders. Occasionally required to walk; use hands to finger, handle, feel or use a calculator or computer; and reach with hands and arms Regularly lift and/or move up to 60 pounds and move up to 800 pounds with the aid of material handling equipment. Work Environment: The characteristics listed below are representative of the work environment typically encountered by an individual while performing the essential duties of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Minimal travel required. Work space is one that contains moving mechanical parts and risk of electric shock. Requires both indoor & outdoor environments in various seasonal weather conditions. Must be able to work in temperatures ranging from -10 to over 100 degrees. Work environment may contain loud noises and odors that may last for long periods of time or on a continual basis. ________________________ Benefits We care about and support all Airgas associates. This is evident not only through our competitive compensation but also through a comprehensive benefits package that includes medical, dental, and vision plans, vacation, sick time, floating holidays, and paid holidays for full-time employees. We provide a progressive parental leave package for our eligible Airgas parents, offering generous paid time off for the birth or placement of children. Additionally, we offer our employees a 401k plan with company matching funds, tuition reimbursement, discounted college tuition for employees' dependents, and an Airgas Scholarship Program. _________________________ Your DIFFERENCES enhance our PERFORMANCE At Airgas, we are committed to building a workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world. We welcome and consider applications from all qualified applicants, regardless of their race, gender, sexual orientation, religion, disability or any other protected characteristic. We strongly believe a diverse organization opens up opportunities for people to express their talent, both individually and collectively and it helps foster our ability to innovate by living our fundamentals, acting for our success and creating an engaging environment in a changing world. _________________________ About Airgas Airgas, an Air Liquide company, is a leading U.S. supplier of industrial, medical and specialty gases, as well as hardgoods and related products; one of the largest U.S. suppliers of safety products; and a leading U.S. supplier of ammonia products and process chemicals. Through the passion and diversity of its 18,000 associates, Airgas fosters a culture of safety, customer success, sustainability and innovation. Airgas associates are empowered to share ideas, take initiative and make decisions. Airgas is a subsidiary of Air Liquide, a world leader in gases, technologies and services for industry and healthcare. Present in 60 countries with approximately 66,500 employees, Air Liquide serves more than 4 million customers and patients. Join us for a stimulating experience: At Airgas, you matter and so does the work you do. As a member of our team, you play an important role in the success of your team, making sure our products are created sustainably and delivered safely and efficiently. In turn, you'll find a welcoming workplace where you're valued for who you are and where you can fill your potential while growing a fulfilling career - whatever path you choose. _________________________ Equal Employment Opportunity Information We are an equal opportunity employer. We welcome all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic. Airgas, an Air Liquide Company is a Government contractor subject to the Vietnam Era Veterans' Readjustment Assistance Act of 1974 and Section 503 of the Rehabilitation Act of 1973. Airgas does not discriminate against qualified applicants with disabilities, and is committed to providing reasonable accommodations to the known disabilities of such individuals so as to ensure equal access to benefits and privileges of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact us by email at us-accommodationrequest@airgas.com. _________________________ California Privacy Notice

Columbus, OH Connect Housing Blocks is currently searching for a full-time Production Associate to join their team in Columbus, Ohio. We are revolutionizing the housing industry, manufacturing multi-story, prefabricated modular apartment housing in Columbus, Ohio, by providing high-quality affordable housing. Production Associates are responsible for performing manufacturing tasks to build prefabricated component and module assemblies on the production line. What we can offer YOU: Health insurance Paid time off 401k Growth opportunities Pay: $16.00 Schedule: Monday - Thursday 7 AM - 5:30 PM In office; 3251 Westerville Rd. Columbus, Ohio 43224 The right candidate will have: High School Diploma (or GED or High School Equivalence Certificate) preferred No experience required Ability to ascend/descend ladders, stairs, scaffolding, ramps, and poles Ability to regularly move and push up to 20 pounds, occasionally move or push up to 50 pounds, and rarely move or push 200 pounds or more Our Production Associate will: Perform manufacturing of housing units, including quality checks on products and parts Review work orders and blueprints to ensure work is performed according to specifications Set up and operates machinery such as presses, pinners, hand tools, gluers, drills, etc. Rotate through all the tasks required in a particular production process Shovel, sweep, and otherwise cleans work areas Maintain production equipment and machinery Operate machinery and heavy equipment, such as forklifts Install plumbing, electrical units, and HVAC systems Install and finishes drywall Paint modules using brushes, paint sprayers, rollers, etc. Trim and cases installations Install fire alarms and fire suppression systems Install windows and doors Cold forms steel framing Install Structo-crete panels for subflooring Interested in becoming our Production Associate? Apply with a current resume today!

Primary location: Johnstown, Ohio Employment status: Full-Time Competitive Wage Rates Based on Experience and Abilities Starting hourly rate for machine operators is $25.00 and up based on experience. What does it mean to work at Steel Ceilings, a subsidiary of Armstrong World Industries? It means being immersed in a supportive culture that recognizes you as a key player in Armstrong's future. We are a large company with a local feel, where you will get to know and collaborate with leadership and your colleagues across the company. By joining us, you'll have the opportunity to make the most of your potential. Alongside a competitive remuneration package, you will receive: A benefits package including: medical, dental, prescription drug, life insurance, 401k match, long-term disability coverage, vacation and sick time, and many more. Personal development to grow your career with us based on your strengths and interests. A working culture that balances individual achievement with teamwork and collaboration. We draw on each other's strengths and allow for different work styles to build engagement and satisfaction to deliver results. Machine Operator Primary Duty: Operate, Troubleshoot, and Verify Product Quality on a Brake and/or Punch Press in a Metal Fabrication shop. Position is responsible for following all company safety policies, confirming and maintaining all manufacturing standards, and ensuring work schedules are accomplished. The base shifts for these position are 2nd Shift (2:45pm - 11:00pm), or 3rd Shift (10:45pm - 7:00am) M - F General Duties: Observe all safety precautions and plant regulations to prevent injury to self and others or damage to material or equipment. Maintain a clean safe working area including sweeping Upon training & qualification, perform miscellaneous duties as required including machine operation (turrets, brakes, presses, panel benders, tube benders, etc), final panel assembly, infill pad creation, crating, forklift operation, inventory counting, and assisting others. Working Responsibilities: Follow all Company and OSHA Safety Policies. Cut & form components from blueprint specification and/or Work Orders to required tolerances. Work with steel, aluminum, curved and angled parts Know and follow all Safety Protocols regarding specific machine you are running Must identify machine requirements for specific jobs as part Assemble materials and package finished products for transport to customers. Operate machinery or stations as instructed by the Team Leader to meet scheduled demands. Ensure that the standards for quality, output, safety etc. are adhered to and improved upon. Keep accurate records of production, waste, quality checks undertaken. Properly maintain equipment. Maintain a high level of customer focus in producing quality products and services that do not sacrifice the safety of others, oneself, nor the environment. Commit to and follow the facility Mission, Vision and Values that support the AWI Operating Principles as an individual and team. Attend and participate in all required company training programs. Conform to all company policies and procedures. Maintain clean and organized work area. Sweep floors and empty trash containers daily and maintain a clean working environment. Education and Experience Prior manufacturing and machine operator experience. Knowledge of metal manufacturing materials, fabrication processes Ability to learn how to operate a variety of production machinery. Work Environment Plant Environment - This position operates in a manufacturing setting and can be subject to extreme cold and hot temperatures; uneven walking surfaces with cords, tools and other obstacles; intermittent loud noises; and dusty or dirty conditions. Basic PPE required: safety glasses, earplugs, and steel toe/composite boots. Specific PPE & training will be provided for activities requiring additional accommodations Physical Demands The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 20 pounds and occasionally lift and move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Steel Ceilings, a subsidiary of AWI, is an Equal Opportunity Employer, and all qualified applicants receive consideration for positions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status

Description: The Production Associate is responsible for accurately and efficiently preparing, packing, and labeling customer orders or production materials for shipment. This role ensures all items meet company quality standards, comply with packing and labeling requirements, and are handled in accordance with safety regulations so that products arrive in excellent condition. Key Responsibilities1. Packing & Labeling Assemble and pack items according to standard operating procedures.. Apply shipping labels and documentation accurately. Ensure packages are properly sealed and protected to prevent damage in transit. 2. Quality Assurance Inspect products and packaging for defects, damage, or inaccuracies before packing. Verify the correct quantity and type of items are included in each order. Safeguard accuracy by ensuring prescription and shipping labels correspond without discrepancy Report discrepancies or quality issues promptly to a supervisor. 3. Material Handling & Inventory Support Alert production specialist to replenish packing supplies such as boxes, tape, and cushioning materials. Assist with counting, organizing, and maintaining stock as needed. 4. Workplace Organization & Safety Maintain a clean, organized, and hazard-free work area. Follow company safety policies and wear required personal protective equipment (PPE). Report accidents, injuries, or unsafe conditions immediately. Work collaboratively with co-workers to maintain efficiency and workflow. Qualifications Education: High school diploma or equivalent required. Experience: Prior warehouse or packing experience is helpful but not required (training provided). Skills & Abilities: Ability to follow written and verbal English instructions accurately. Strong attention to detail and manual dexterity. Basic reading, writing, and arithmetic skills. Basic proficiency with computer systems and digital tools relevant to daily operations. Key Essential Functions Must be able to stand for at least 8 hours at a day and up to 10 hours per day during peak periods. Must be able to lift up to 30-50 pounds. Must perform repetitive motions for an entire shift (bending, reaching, lifting, scanning labels, packing boxes). Must be able to work onsite for all scheduled shifts. Must be able to work in a warehouse environment with varying temperatures and moderate noise. Working Environment Location: On-site Schedule: Full-time May require additional availability or flexibility for escalations. Warehouse environment with potential exposure to dust, temperature fluctuations, and loud equipment. PPE is provided and required when applicable. Employment Classification Status: Full-time / Part-time / Temporary (to be determined) FLSA: Non-exempt (eligible for overtime pay) Equal Employment Opportunity (EEO) Statement Gifthealth is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. All employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, transgender status, national origin, age, disability, veteran status, or any other legally protected status. Disclaimer This job description is intended to describe the general nature and level of work being performed. It is not intended to be an exhaustive list of all responsibilities, duties, or skills required of personnel.Gifthealth reserves the right to modify job duties or descriptions at any time. Requirements:

The Production Associate is responsible for accurately and efficiently preparing, packing, and labeling customer orders or production materials for shipment. This role ensures all items meet company quality standards, comply with packing and labeling requirements, and are handled in accordance with safety regulations so that products arrive in excellent condition. Key Responsibilities1. Packing & Labeling Assemble and pack items according to standard operating procedures.. Apply shipping labels and documentation accurately. Ensure packages are properly sealed and protected to prevent damage in transit. 2. Quality Assurance Inspect products and packaging for defects, damage, or inaccuracies before packing. Verify the correct quantity and type of items are included in each order. Safeguard accuracy by ensuring prescription and shipping labels correspond without discrepancy Report discrepancies or quality issues promptly to a supervisor. 3. Material Handling & Inventory Support Alert production specialist to replenish packing supplies such as boxes, tape, and cushioning materials. Assist with counting, organizing, and maintaining stock as needed. 4. Workplace Organization & Safety Maintain a clean, organized, and hazard-free work area. Follow company safety policies and wear required personal protective equipment (PPE). Report accidents, injuries, or unsafe conditions immediately. Work collaboratively with co-workers to maintain efficiency and workflow. Qualifications Education: High school diploma or equivalent required. Experience: Prior warehouse or packing experience is helpful but not required (training provided). Skills & Abilities: Ability to follow written and verbal English instructions accurately. Strong attention to detail and manual dexterity. Basic reading, writing, and arithmetic skills. Basic proficiency with computer systems and digital tools relevant to daily operations. Key Essential Functions Must be able to stand for at least 8 hours at a day and up to 10 hours per day during peak periods. Must be able to lift up to 30-50 pounds. Must perform repetitive motions for an entire shift (bending, reaching, lifting, scanning labels, packing boxes). Must be able to work onsite for all scheduled shifts. Must be able to work in a warehouse environment with varying temperatures and moderate noise. Working Environment Location: On-site Schedule: Full-time May require additional availability or flexibility for escalations. Warehouse environment with potential exposure to dust, temperature fluctuations, and loud equipment. PPE is provided and required when applicable. Employment Classification Status: Full-time / Part-time / Temporary (to be determined) FLSA: Non-exempt (eligible for overtime pay) Equal Employment Opportunity (EEO) Statement Gifthealth is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. All employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, transgender status, national origin, age, disability, veteran status, or any other legally protected status. Disclaimer This job description is intended to describe the general nature and level of work being performed. It is not intended to be an exhaustive list of all responsibilities, duties, or skills required of personnel.Gifthealth reserves the right to modify job duties or descriptions at any time.

Hourly - Full Time OT as required 1st shift- Mon-Fri 6AM-2:30PM Key Responsibilities: Follows all safety procedures associated with machine center Prepares bottom and top sheets for units and prints load tags Responsible for unitization per customer specification Understands and participates, as required, in quality checks Work at pace set by the machine operator to achieve conformance to production schedule Reads and follows shop order instructions Troubleshoot problems throughout production run Complies with all company policies and procedures Maintains high standards of cleanliness and housekeeping in work area Requirements/Qualifications: Previous experience in a manufacturing / production environment is preferred Proven ability to work SAFELY adhering to all safety processes and policies Ability to work a flexible schedule on occasion to support operational and business needs Ability to work either individually or in a collaborative, team-oriented environment Physical Demands/Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the functions of this job with or without reasonable accommodation. The work environment characteristics described here are representative of those an employee encounters while performing the functions of this job. Physical Requirements: Must be able to lift 50 pounds on a repeatedly regular basis. Must be able to stand for 8-10 hours a day. Bend, stand, squat, twist repeatedly. Work Environment: Loud Environment that requires hearing protection Exposure to fumes or airborne particles Manufacturing facility with machinery and equipment occasionally exposed to wet and/or humid conditions; high, precarious places; toxic or caustic chemicals; extreme heat; and risk of electrical shock Fast paced environment For safety and operational efficiency, candidates must be able to read, write, and communicate effectively in English. This includes understanding safety instructions, operating procedures, and workplace signage. *Shift Differential Opportunities! About Welch Packaging: Headquartered in Elkhart, IN, Welch Packaging was started in 1985 with four employees. Since then, Welch has become one of the most dynamic independent packaging companies in the United States. Welch now has multiple sheet plants throughout the Midwest. Welch Packaging has grown from four employees to over one thousand employees. With customers at the core of our business philosophy, we have a service discipline that makes us easy to do business with. Through organic growth, strategic acquisitions, and a strong entrepreneurial spirit Welch Packaging continues to be a leader in custom packaging solutions. Welch encourages associates to serve in a variety of civic and charitable organizations. The "Welch Way" involves giving back to our communities. On an annual basis, Welch Packaging contributes to a variety of charities and higher education in the communities in which we serve. At Welch Packaging, we believe in building boxes, but we don't believe in putting our associates into them! Welch hires people who fit our business culture -- people with integrity, a commitment to customer service and a passion for success -- and we teach them the packaging business through a comprehensive individualized training and placement program. Welch looks for life-long learners committed to making a difference in the world through their work. Come grow with us! Interested candidates with strong work ethic, customer focus, and initiative to succeed in a fast paced environment are encouraged to apply! All candidates for this position are subject to an authorized background check and drug screen. The candidate must pass both to become a Welch Packaging Team Member.

The role of the finishing operator is to ensure the packaging, labeling, and finished product are correct per our customer requirements in our work instructions as the operator performs the functions of packing, glove pull, and basket return. Duties and Responsibilities The finishing operator performs the following tasks: Rotates regularly to perform the basket return, hand packing of gloves, and glove pull-off former tasks. Qualifications Able to stand on floor performing tasks for a 12-hour period Able to perform manual hand packing of gloves at rate Able to pay attention to detail Working conditions Work Hours: Position operates in 12-hour shifts Overtime: compensated according to labor laws. Breaks: 30-minute lunch break and two 15-minute rest breaks per shift. Safety Standards: Mandatory use of personal protective equipment (PPE), including helmets, gloves, and safety goggles. Regular safety drills, including fire and emergency evacuation procedures. Clearly marked emergency exits and first aid stations. Work Environment: The role may require standing for extended periods, walking around the facility, squatting, and occasionally lifting or moving heavy objects Well-ventilated and adequately lit workspaces. Working in a non-temperature-controlled warehouse can involve exposure to extreme temperatures Designated smoking areas outside of the facility. Training and Development: Comprehensive onboarding training for all new employees, covering safety, operational procedures, and equipment use. Continuous training programs to enhance skills and knowledge. Regular safety training updates and refresher courses. Health and Wellness: Provision of clean drinking water and sanitation facilities. Programs to promote physical and mental well-being, including access to counseling services. Workplace Conduct: Zero tolerance for workplace harassment, discrimination, and bullying. Encouragement of teamwork, collaboration, and mutual respect among employees. Compensation and Benefits: Competitive wages in line with industry standards. Health insurance and retirement benefits available to all full-time employees.

Tosoh SMD, Inc. is a global leader in semiconductor materials. Our superior products help customers introduce cutting-edge technologies that make our lives easier and move us into the future. Our state-of-the-art manufacturing facility and materials laboratory located in Grove City, OH manages the entire life cycle of our products, including supply chain development, research and development, manufacturing, testing and distribution. Our innovative and devoted team of scientists, engineers, metallurgical experts, manufacturers and managers continuously collaborate and strategize to improve and create new materials for a wide range of customers' semiconductor needs. These products are used in many final applications like automotive, mobile devices, computers, artificial intelligence, 5G networks and industrial automation. As one of over 100 Tosoh Corporation's family of companies our motto is "We Make the Material That Makes Your Devices Work". Position Charter The Machine Operator I is the entry level manufacturing position. The Machine Operator I is responsible for manufacturing products safely and efficiently to support the achievement of company objectives. Position Profile Non-Exempt Full-Time Reporting Relationships The Machine Operator I reports to the Manufacturing Supervisor. Major Duties and Responsibilities Follow all process documents, such as work instructions, procedures, inspection criteria. Report results in appropriate Quality Management System (QMS) and communicate non-conformances to leadership. Manufacture products in alignment with defined output standards as measured by daily operational efficiency. Demonstrate flexibility of schedule when pursuing training opportunities to achieve personal and company objectives. Understands and adheres to all safety requirements. Communicates identified risks to leadership and assists in resolution. Completes all 5S (Sort, Set in Order, Shine, Standardize, and Sustain) standards to maintain a safe, organized, and efficient work environment. Maintains regular and reliable attendance. Contributes to culture through alignment with company values and code of conduct. Maintains a positive attitude, displays enthusiasm for assigned tasks, and communicates effectively and professionally with team members. Other related duties. Education High school diploma or GED. Trade or technical school experience is preferred. Skills and Qualifications Previous experience in manufacturing is preferred. Ability to read and understand process documents. Basic computer skills Physical Requirements Ability to lift and move up to 40 pounds on a regular and routine basis. Frequent bending and twisting required. Must be able to stand and walk for extended periods of time. Must be able to wear required personal protective equipment (PPE) as defined by process. Tosoh SMD, Inc. is an Equal Opportunity Employer M/F/Disabled/Veterans

Production Associate Tube Cutoff & Auto TIG Welding Departments Pay Rate: Starting at $18 $19/HR once hired in, and $20 after one-year Shift: Monday - Friday 6:00am - 4:30pm Overtime Pay: Time and a half after 40 hours Job Description for Production Associate Looking for a hands-on role where your focus and stamina pay off? Our Production Associates play a key part in delivering precision and quality. In this role, you'll be cross-trained in both the Tube Cutoff and Auto TIG (Tungsten Inert Gas) Welding departments, making you a versatile and valued member of the team. Whether you're kickstarting a manufacturing career or ready to grow your skills, we're ready to support your success. Job Responsibilities for Production Associate Perform tasks in both the Tube Cutoff and Auto TIG (Tungsten Inert Gas) Welding departments while ensuring accuracy and quality. Interpret work orders and execute production tasks with accuracy Operate hand tools and machinery with precision Manage your daily workload to meet production goals Keep safety top of mind while maintaining a clean, organized workspace Collaborate with your team while staying on top of individual responsibilities Job Requirements for Production Associate Exceptional attention to detail Physical ability to lift and bend up to 70 lbs Self-motivated with strong time management skills Comfort reading work instructions and labels in English Ability to use a tape measure and complete basic math (add/subtract) Must have neat/readable hand writing

We are currently interviewing for a Machine Operator in London, OH. Bodycote is offering a $1500 sign-on retention bonus! Bodycote offers: Competitive wages are offered based on experience. Paid holidays and paid time off. 401k with a match. Medical, Dental, and Vision Plans for employee and their families. Must pass a pre-employment drug screen. Ability to work full-time, 40 hours per week. 7:00 am - 3:00 pm Monday - Friday. Our people are the heart of our business. As the world's largest provider of thermal processing services, Bodycote employs thousands of highly skilled staff around the globe, including some of the best engineers, scientists, and technicians in the industry. Come join our team! Due to the nature of our business and a heavy industrial market, Bodycote deems this position to be safety-sensitive. Summary: Based in London, OH, the S3P Operator, under the direct supervision of the Plant Manager, performs essential job functions related to the daily operations of stainless steel surface hardening (Kolsterising ) and the processing of customer parts according to written requirements and specifications, while also assisting other employees as needed. Essential Job Functions (Duties and Responsibilities): The primary duties consist of, but are not limited to, the following. Assists with operations, control, and monitoring of heat treating and related equipment as required and as written in procedures on shop traveler and/or customer paperwork Prepares work for processing; loads and unloads furnaces, bins, fixtures, baskets, etc. Brings any irregularity tothe Lead Person for management Promotes safety and good housekeeping practices Must work in a manner consistent with the EMS Performs other tasks as assigned or dictated by position Must have the ability to report for work on time, follow directions, interact effectively with co-workers, understand and follow rules and procedures, and accept constructive criticism Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position must satisfy ITAR compliance requirements; therefore, candidates must be U.S. Citizens or Permanent Resident cardholders. Education - High school diploma or equivalent. Minimum six months to one year of experience in heat treating. Must have working knowledge of metallurgy, temperatures, etc. May be required to work overtime or any shift, including weekends. Must be able to obtain and maintain forklift operation certification. Must demonstrate the ability to read, write, and communicate in the English language. Knowledge and hands-on experience of computer applications, including Microsoft Office and databases, is required. Physical & Mental Demands: The following physical and mental demands consist of, but are not limited to, the following. Must be able to work in a standing position for extended periods of time in an office/industrial environment. Manual dexterity to perform data entry functions. Ability to bend, pull, stoop, and reach to perform functions. Ability to lift up to 35 lbs. May be exposed to heat, fumes, noise, and humidity, etc. Must have the cognitive and mental capacity to perform essential job functions ∙ Must be able to communicate effectively orally and in writing. Visual acuity to read documents, computer screens, files, etc. Ability to hear in person and via phone. The statements herein are intended to describe the general nature and levels of the work performed by employees, but are not a complete list of responsibilities, duties, and skills required of personnel so classified. Furthermore, the job description does not constitute a written or implied contract for employment. Bodycote reserves the right to revise or change job duties and responsibilities as the need arises. Bodycote is an Equal Opportunity Employer and does not discriminate against otherwise qualified applicants on the basis of race, color, religion, national origin, sex, age, gender identity, sexual orientation, veteran status, or on the basis of disability.

at Attindas - US COME JOIN OUR CARING CULTURE AT ATTINDAS HYGIENE PARTNERS! Attindas is offering exciting opportunities for Production Machine Operators - Third Shift (10:30pm - 7 am) at our Delaware, Ohio manufacturing facility starting at $18.25*/hour! Attindas Hygiene Partners designs, manufactures, and markets absorbent hygiene products. The company sells adult incontinence and infant diapers, among other products, into the healthcare, retail, and direct-to-consumer channels under brands including Attends, Indas, and Comfees as well as a wide range of private label brands for retailers. We seek the best people to drive our business to the next level. We offer comprehensive benefits package which includes: Health Dental Vision STD/LTD Life Insurance 401K 3% of your Compensation/ $0.50 for every $1 on your first %5 12 Paid Holidays Paid vacation Tuition Reimbursement Employee Assistance Program Travel Assistance Program Your Role:The Production Machine Operator is responsible for assisting the Line Leader with all aspects of operating the line and maintaining processes within prescribed specifications with a focus on safety, quality, efficiency and waste. Qualifications: Mechanical aptitude Experience in a high-speed manufacturing environment as a machine helper or operator Ability to work on second shift and third shift Ability to pass a drug screen and background check Incentives: Shift Differential Pay - $1 Both full-time and 90-day temp-to-hire positions available Manufacturing Bonus, up to $1000 per Quarter Extensive Training Program and Pay Progression - Certification Program *Pay rates are based on experience. Attindas is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, color, sex (including gender identity or expression, sexual orientation, and pregnancy), marital status, religion, national origin, genetic information, disability, or veteran status.

We are a global company meeting the needs of foundries worldwide. Our company provides sales, service, and support to customers in the United States and numerous countries around the globe. The main duty of this position is the finish work of aluminum plates. Candidates must be authorized to work in the U.S. and pass a background check. Relocation is not available. Position responsibilities include but are not limited to: Ladle melted aluminum into molds for the production of plates per customer specifications Finish work on aluminum plates including grinding, hammering, and cutting; use of power tools, hand tools, and repetitive motion. Set-up and maintenance of molds Effectively communicate with supervisor regarding supply inventory and product scheduling Cross-training and willingness to help in other departments when directed Maintain a safe, clean, and orderly work area Qualifications: Knowledge and experience using a grinder - required Ability to read a measuring tape - required Foundry experience - preferred Welding experience - preferred Requires the use of power tools and includes repetitive motion; experience preferred Requires the use of hand tools and includes repetitive motion; experience preferred Willingness to train and operate a forklift - required; experience preferred Must be able to lift and carry up to 50 lbs. Must be able to stand and/or walk during the entire shift Must be able to navigate stairs & ladders; bend, kneel, twist, & reach overhead Must be dependable and have a good work ethic Must be trainable and willing to learn Must be able to work in hot & cold environments Must wear safety toe shoes and safety glasses in production areas Must have reliable transportation to work Must be authorized to work in the United States Must pass a background check Job details: Monday-Thursday 5:00 a.m. - 3:30 p.m.; unpaid 30-minute daily lunch break Occasional mandatory overtime as directed, including weekends Warehouse setting Full-Time Employee Benefits: Medical, dental, vision, life and long-term disability insurances available on the first day of employment Company-paid short-term disability insurance 401(k) enrollment after 90 days with up to 4% employer matching Paid time off after introductory period (weekly accrual) Paid holidays View all jobs at this company

DSV - Global transport and logistics In 1976, ten independent hauliers joined forces and founded DSV in Denmark. Since then, DSV has evolved to become the world's 3rd largest supplier of global solutions within transport and logistics. Today, we add value to our customers' entire supply chain by transporting, storing, packaging, re-packaging, processing and clearing all types of goods. We work every day from our many offices in more than 80 countries to ensure a steady supply of goods to production lines, outlets, stores and consumers all over the world. Our reach is global yet our presence is local and close to our customers. Read more at *********** Location: USA - New Albany, 1101 Beech Rd Division: Solutions Job Posting Title: Warehouse Operator( A shift JIT M-F 6am-230pm) Time Type: Full Time Tasks & Responsibilities: ● Oversee loading and unloading of inbound and outbound freight to and from vehicles and containers including the management of shipping documents and records ● Perform quality checks on inbound and outbound freight, checking for accurate part numbers, quantities and ensuring material is in pristine condition ● Execute daily inventory cycle counts and replenishment orders for critical spare parts on site at the datacenter ● Process return shipments of various electronic components utilizing multiple warehouse management systems ● Oversee and perform the placement server racks on the datacenter floor utilizing laser measuring devices with 100% accuracy ● Oversee and perform the population of electronic components and install cabling into server racks by following provided diagrams and schematics ● Install rack hardware using various hand, power and measuring tools ● Operate various types of material handling equipment such as straddle stackers, rack movers and electric pallet jacks ● Perform and oversee cleanup activities in the work area to ensure safety, cleanliness, and adherence to 5s standards ● Push, pull and lift frequently throughout the workday DSV is an equal employment opportunity employer. Candidates are considered for employment without regard to race, creed, color, national origin, age, sex, religion, ancestry, disability, veteran status, marital status, gender identity, sexual orientation, national origin, or any other characteristic protected by applicable federal, state or local law. If you require special assistance or accommodation while seeking employment with DSV, please contact Human Resources at *************. If you are interested in learning the status of your application, please note you will be contacted directly by the appropriate human resources contact person if you are selected for further consideration. DSV reserves the right to defer or close a vacancy at any time. DSV - Global transport and logistics Working at DSV means playing in a different league. As a global leader in transport and logistics, we have been on an extraordinary journey of growth. Let's grow together as we continue to innovate, digitalise and build on our achievements. With close to 160,000 colleagues in over 90 countries, we work every day to offer solid services and meet our customers' needs and help them achieve their goals. We know that the best way to achieve this is by bringing in new talent, fresh perspectives and ambitious individuals like you. At DSV, performance is in our DNA. We don't just work - we aim to shape the future of logistics. This ambition fuels a dynamic environment built on collaboration with world-class team players, accountability and action. We value inclusivity, embrace different cultures and respect the dignity and rights of every individual. If you want to make an impact, be trusted by customers and grow your career in a forward-thinking company - this is the place to be. Start here. Go anywhere Visit dsv.com and follow us on LinkedIn and Facebook. open/close Print Share on Twitter Share on LinkedIn Send by email

JOB DETAILS 1st Shift Base Pay Rate: $17.00 per hour 1st Shift: Monday-Friday 6am-2:30pm 3rd Shift Base Pay Rate: $17.00 per hour, plus $1.00 per hour shift differential 3rd Shift: Sunday-Thursday 7:30PM To 4:00AM (Overtime until 6:00AM) DUTIES AND RESPONSIBILITIES The Production Associate is responsible for the fabrication and production of the component parts for the final assembly of windows. Successful candidates enjoy working in a fast-paced, physically demanding, and repetitive work environment, which includes heavy lifting or working with your hands. This job description is reflective of tasks that will be performed in a variety of departments. Perform repetitive workstation operations to mass-produce windows, doors, and glass units May support the window operations in delivering, wrapping, loading, and unloading of materials or windows Perform any workstation function using hand or power tools, saws, welders, or routers Understand and carry out verbal instructions Read and carry out simple written instructions Read work orders, labels, and schedules Use a tape measure (will be asked to read measurements during interview), inspect, examine, and observe for product defects Make fraction and decimal conversions Operate any equipment needed to perform a job Perform other duties as assigned Provide on-the-job training to new employees Qualifications Must be at least 18 years of age to apply Must be authorized to work in the US Must be able to pass a background check and drug test Ability to carry out written or verbal instructions Ability to stand for extended periods Ability to lift up to 50 pounds on a continual basis above shoulder height and below the waist Preferably with experience in manufacturing Preferably with experience reading a tape measure Additional Information All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at ************ or *******************************. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at ************ or *******************************. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Slitter OperatorFull-Time Regular Hebron, OH, US$19/hr +50 cent shift differential The primary responsibility of this position is to set up and operate slitting machines; to cut film to specified widths, lengths and diameters in a way that meets or exceeds standards for safety, quality and productivity. Job Duties: Maintains a clean and orderly work area/warehouse Maintains a safe working environment by following all company safety policies and procedures and reports unsafe conditions and incidents, while maintaining quality standards Maintains company's quality standards and follows computer procedures to handle damaged material and quarantine material Transport materials to designated areas with forklifts Installs and aligns razor blades for slitting feedstock materials Starts machine, adjusts blade and controls, using wrenches, rulers, gauges, templates or other tools, and monitors operation Tests and adjusts settings as required for producing according to specification Selects, cleans, and installs spacers, lay-on bars, sleeves, and blades to set machine up to run in conformance to specifications Reads production schedule, customer specification, and other documents to determine set up or adjustment of equipment Threads feedstock from reel through slitter and secures on rewinder Observes machine operation and examines rolls for flatness, holes, surface and other defects Measures dimensions of rolls using tape measure, gauge, template, ruler and square, for conformance to specification Interacts with PLC computer to operate machine and possibly adjust parameters Uses computer to enter production times, enter weights, generate tickets, etc. Other duties as assigned Job Qualifications: High school diploma or general education degree (GED), one to three years of experience preferred Ability to work at a fast pace Ability to multi task and read production tickets Ability to perform math calculations including fractions Must be able to read tape measure, including micrometers Must be able to successfully obtain and maintain forklift certification in accordance with internal company and OSHA standards Must be computer literate Must be dedicated to continuous improvement Must be able to lift 50 pounds, bend, stretch, or stand for extended periods of time Must have organizational skills with an ability to prioritize and multi-task Ability to maintain confidentiality, exceptional attention to detail and good follow-up skills Must possess good problem solving skills. Ability to interact in a professional manner with employees and vendors Ability to communicate effectively both verbally and in writing Willingness to work as team member or independently

Job Description Reasons you'll love working here: 1) Career development: Many of our entry-level employees become leaders in operations and other areas. 2) Benefits: Our range of benefits can include health care in the first 30 days, 401(k) savings plan with employer match, Profit Sharing, vacation and paid time off and more! 3) Reliable hours: We will give you a schedule you can count on. A company the truly believes in a work life balance, close to home, affordable benefits, and a family atmosphere. Day 1 eligible for Holiday pay and start earning your Paid Time Off (PTO) and vacation time. Eligible for benefits at 30 days including medical, dental, vision, life insurance, STD, LTD, Accident Insurance, Critical Illness Insurance, FSA. Eligible for 401K at 90 days full time employment. Pennant is a leading manufacturer of metal formed products serving a wide range of industries for over 80 years. If you are interested in working for Pennant, apply today and tell us about your skills and work experience. Essential Job Duties Operate various manufacturing equipment to produce metal formed parts. Assemble product. Ensure safety rules and regulations are followed. Meet customer quality specification. Job Requirements Must be 18 years of age. Prior manufacturing experience not required. Physical Requirements Ability to frequently stand and use hands/fingers to handle or feel product. Ability to frequently reach with hands and arms. Ability to occasionally talk/listen to others. Ability to frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Must have close vision, color vision and ability to adjust focus. Other Requirements Must observe all safety rules and procedures and adhere to Pennant's drug free workplace policy. Must be able to work individually in a team environment. Must be able to work daily and weekend overtime as needed, based upon customer demands. Must be able to pass a pre-employment background check and drug screen. Apply online at ********************************* or in person at 12381 SR 22 East Sabina Ohio 45169 Monday through Friday 7:00 AM - 3:30PM.