Machine operator jobs in Kalamazoo, MI

The responsibility of the Machine Operator is to operate molding equipment to produce various molded products to efficiency and quality standards. Duties and Responsibilities Ensure that all necessary information and tools required for each job are in place before work begins Pull and review setup sheets prior to starting a job Maintains equipment required for molding machines Stage product properly after molding and move to required staging locations Complete all assigned projects by the due date Review production priorities Must meet or exceed all training requirements including those related to ISO standards and attend scheduled shift meetings or other meetings required Meets or exceeds production targets Inspects product for conformance to quality standards Produces molded products using various methods designated for the job. These methods include, but are not limited to: Use of oven controls Use of overhead crane Use of hand and power tools Use of pallet jack Use of open flame Maintains a clean and organized working environment. Other duties as assigned. Qualifications 1-2 years' experience in manufacturing preferred Good communication skills Good organizational skills Ability to read and write proficiently in English Ability to use hand and power tools Ability to operate and maintain industrial equipment Working Conditions Able to work in a hot humid environment for extended periods of time This job is in a typical manufacturing environment, to include, but not limited to: Ovens, torches, and rotating tools Forklifts and other moving machinery Loud work environment Physical Requirements Must be able to remain stationary with intermediate walking throughout the shift Must be able to frequently lift parts weighing up to 50 pounds alone and parts more than 50 pounds with assistance, and must be able to transport these up to 20 feet Must be able to frequently position self to maneuver around the parts, materials and molds Must be able to operate hand tools Must be able to write legibly

Job Description We're providing superior acoustical products worldwide! Before you break out your guitars, it's not that kind of acoustic. As a Production Associate for this fiber-based molding company, you will assist in the production of acoustical fiber insulation for a variety of automotive applications.Let's chat about the Production Associate role if you: Understand the importance of a safe work environment Can work at a steady pace Have high attention to detail thanks to your keen eye Have reliable transportation that gets you to work on time every day Are able to pass a pre-employment drug screen (no THC testing for pre-employment!) and background check Must be able to read, write and speak English Have previous manufacturing experience (not required, but preferred!) We offer our Production Associates: A pay rate of $16.50-$18.50/hr, depending on the shift and position Full-time opportunities on all shifts 10-hour workdays The ability to be hired in at 480 hours The freedom to dress for your own workday (shorts, sweatpants, and tank tops are a-okay!) $100 bonus when you refer a friend to WSI By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You have the option to unsubscribe from email communications or remove yourself from SMS messaging by replying 'stop' at any time.

Job DescriptionBargerGard Technician (Thermoform Operator) Location: Elkhart, IN Shift: 3rd Shift (10:00pm-6:00am Sunday-Thursday) Pay: $19.90/hour Job SummaryAre you mechanically inclined and ready to join a company that values safety, teamwork, and quality? We're seeking a BargerGard Technician to operate thermoform machines, inspect and package parts, and work closely with your team to ensure smooth and efficient production on 3rd shift. What You'll Be DoingAs a BargerGard Technician, your core responsibilities will include: Machine Operation: Operate thermoform machines efficiently and safely to meet daily production goals. Quality Control: Inspect and verify the quality of BargerGard material and finished parts. Packaging & Training: Package parts according to standards and train packaging technicians as needed. Maintenance: Perform minor maintenance and cleaning on equipment to keep machines running smoothly. Teamwork & Safety: Work closely with your team in the Barger department while maintaining a strong focus on safety and continuous improvement. In addition, you will also be expected to follow all company safety and housekeeping policies and perform other duties as assigned. What We're Looking ForQualifications: High School Diploma or GED required. Proven mechanical aptitude and experience operating machinery. Attention to detail and accuracy in inspecting and packaging parts. Ability to pass a vision test including: - Visual acuity (corrected vision of at least 20/40) - Peripheral and depth perception. Basic math, computer, and mechanical skills. Ability to communicate effectively in English (both verbal and written). Demonstrated ability to work independently and as part of a team.Physical Requirements: Bending, stooping, climbing, reaching, twisting, and standing for long periods. Ability to lift and move materials as needed. Strong visual acuity and fine motor coordination. Why Join Us?This is an excellent opportunity for someone who enjoys hands-on mechanical work and wants to grow with a team that values precision, safety, and collaboration.Workbox Staffing Benefits: Weekly Pay Hire-in Opportunities Comprehensive Benefits including Health, Life, and Dental Veteran-Friendly and Equal Opportunity Employer Ready to make a change? Apply online today and let's DO GOOD together!

ESSENTIAL FUNCTIONS AND RESPONSIBILITIES- EXTRUSION OPERATOR Duties and assignments as required by Operations Leadership Safe and efficient operation of equipment to meet the needs (Quality, Cost, and Delivery) of our customers. Function at production levels in at least 3 of the following positions: Die Operator, Crane Operator, Furnace Operator, Billet Prep, GFM Furnace tender Set-up and change-over of Extrusion Press and related production equipment. Operation of support equipment: coiler, saws, etc. Perform maintenance on extrusion press and related equipment as assigned. Perform daily inspections of equipment (TPR) and maintain housekeeping expectations (5S). Perform Administrative Task (i.e. SAP, production logs, other as assigned). Operation of industrial equipment (forklift, cranes, hand carts, hand tools, etc.) Actively participate in continuous improvement initiatives to improve our competitive advantage (Quality, Cost, and Delivery). QUALIFICATIONS A high school diploma or equivalent preferred but not required 2-3 years manufacturing experience a plus · Required to maintain licenses on overhead cranes and forklift. Established in 1929, Elmet is a global manufacturer of high-performance metals and metal products. Our world-class facility produces mill, machined, and fabricated products to our customers' most exacting specifications from Elmet-manufactured refractory metals. Elmet services the high-temperature furnace, semiconductor, medical imaging, medical device, aerospace, defense, and other markets. Elmet is ISO 9001 and AS9100 certified. For more information about Elmet, please visit us online at ************************** VETERAN/DISABLED Elmet Technology is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran status, familial status, domestic violence status, or any other status protected by law.

Job DescriptionJob Title: Assistant Machine OperatorLocation: Walker, MI Shift Hours: 3rd shift M-TH 7:30PM to 6:00AM and 1st shift 6:00AM-2:30PM Monday-Friday. Pay Range: $22-$24/hour +$1 shift differential. Quarterly Production Bonus & Monthly Attendance Bonus! As a Machine Helper/Assistant you can expect to produce corrugated products for our customers in coherence with promoting the corporate vision, mission statement, and core values.Day-to-Day Role: Understand machine set-up, machine runs, plant data entry, handwork, or assembly assignments. Have good hand-eye coordination. Occasional lifting of 50 pounds and frequent lifting of 10-20 pounds. Core Skills and Qualifications: 1+ years of experience working in a corrugated box plant. Must be 18 years or older. High school diploma or equivalent. Ability to read and interpret documents such as safety rules, operating instructions and procedural documents. About Spark Packaging: Spark Packaging is a Michigan-headquartered recruiting and staffing company that connects great talent with great employers. We understand that finding a new position can be stressful and identifying top talent can be challenging. For us to maximize successful placement and retention, we start by listening to and understanding each of our clients. We believe in face-to-face interaction and having a solid understanding of our client's business before placement. We pride ourselves in team development as it matches our purpose as an organization to continually create career opportunities.

Voyant Beauty believes our people are more than just employees; they're the driving force behind everything we achieve. Our culture fosters teamwork, respect, and camaraderie, ensuring that every individual's contribution is valued and celebrated. We invest in their growth, providing opportunities for development and advancement within our dynamic team. Voyant Beauty is a company that specializes in the development and manufacturing, of beauty, personal and home care products. We work with various brands, retailers, and businesses to create customer formulations and products tailored to their needs. This can include skincare, haircare, bath and body products, fragrances, and more. Essentially, Voyant Beauty serves as a one-stop-shop for companies looking to bring their beauty and personal care product ideas to life. Safety is a core value at Voyant Beauty. We prioritize the well-being of our team members, ensuring a safe and secure environment where everyone can thrive and excel. If you're seeking to be part of a team where your talents are valued, your safety is paramount, and your efforts contribute to meaningful change, then Voyant Beauty is the place for you. Come join us and be a part of our journey. A Brief OverviewUnder the supervision of a Production Supervisor, will perform any and all of the following duties, auto packer, capper, snorkeler, labeler, shrink bundler, unit cartoner, carton erector, depalletizer, button tipper, all other machines as required by the manufacturing process and make adjustments on them, assist in changeovers and perform necessary adjustments, and cleaning operations. Responsible for performing work in a quality manner and producing a quality product.What you will do Fill-out all required production/quality documentation as required by individual machine operator descriptions Perform all quality inspection checks as required by individual machine operator descriptions and as required by supervision Perform all duties listed in individual machine operation descriptions for each machine Clean assigned area and/or machine during down time, or immediately after the end of their shift Perform all duties with extreme safety consciousness and with regard for the safety of other personnel Assist in changeovers as defined as the ability after completion of appropriate training, to assist in changeover as set up of a particular machine or machines from the current to the following product Perform all labor grade 1 duties when required by supervision In addition to the Duties listed, qualifications may include physical requirements, additional education or certification as deemed necessary for the safe and successful performance of the job To Staffing and Recruiting Agencies:Our company does not accept unsolicited curriculum vitae's or applications from agencies. We are not responsible for any fees related to unsolicited curriculum vitae's or applications and explicitly reserve its right to contact candidates presented in such unsolicited curriculum vitae's or application. Our company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, sex, color, national origin, sexual orientation, age, disability or veteran status. Vee Pak will consider requests for accommodations due to a disability impacting a qualified employee's ability to perform the essential functions of their position consistent with applicable laws. In addition to federal law requirements, Vee Pak complies with applicable provincial and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Title: Machine Operator Reports to: Production Supervisor We're thrilled to announce an exciting update for machine operator positions: starting pay has been increased to $21 per hour! Shifts Available: 1st, 2nd (10% Shift Premium), 3rd (6% Shift Premium), Rotating 12-Hour Days, Rotating 12-Hour Nights (10% Shift Premium) Medical, Dental and Vision benefits are paid 100% by LG Energy Solution! LG Energy Solution Michigan Inc. (LGESMI) develops and manufactures large lithium ion polymer batteries and packs for electric vehicle (EV) and energy storage applications. Come join the leader in advanced EV batteries! ****************** Summary: As a Technical Operator I, you will be operating the assigned process/equipment in accordance with the work instructions. You will help support production volumes and quality under the production plan while using equipment and computerized systems to produce, assemble, evaluate, process and package lithium-ion batteries in a climate-controlled environment. Responsibilities: Prepare equipment and materials for production Operate equipment in accordance with the OP Manual, in-putting materials, and monitoring defects/loss for continuous operation Conduct self-inspection of the product and check the quality Maintain accurate records of production work in GMES (Global Manufacturing Execution System) Track all non-conformations and scraps Compliance with health/safety/environmental/fire regulations Perform 5s audits, maintain production logs, quality checks and maintenance work logs Maintain cleanliness at work-site in accordance with 5S3R Standards: Sort, Set in order, Shine, Standardize, Sustain Right Location, Right Quantity, Right Container Follow LGESMI existing cleaning SOP's during downtime (e.g. line stop, waiting time, etc.), which includes cleaning your designated machine and/or surrounding work area Perform other duties as assigned Qualifications: High School Diploma or GED preferred Experience: 1 to 3+ years of manufacturing experience Skills: Basic computer literacy Communication skills Problem solving and analytical skills Basic arithmetic ability Reading and writing skills Ability to work well with individuals and teams to ensure the team meets & exceeds expectations Physical Requirements: Must be able to properly and regularly utilize the following PPE for a period of up to 12 hours Safety glasses Steel-toed shoes nitrile gloves ear protection clean room suit Must be able to do the following repeatedly for a period of up to 12 hours Lift/push/pull up to 50 pounds Stoop, twist, bend Reach overhead Sit and/or stand Use of hands and fingers to perform job function LGESMI is an Equal Opportunity employer that values the diversity of its workforce. EEO

The machine operator will be responsible for operating a vertical/horizontal injection molding press or hand assembly. They will be responsible for setting the parts, cycling the press and removing the finished goods and placing them into a box for shipment. Following all procedures and work instructions, achieve optimal productivity, quality and safety assuring internal and external customer satisfaction. This position reports to Shift Supervisor or Plant Manager. Hiring for multiple shifts. ESSENTIAL DUTIES AND RESPONSIBILITIES: Must communicate on a daily basis with all shift managers, shift supervisors, quality managers, process techs and operators. Must follow all process improvements, Work Instructions, IATF 16949:2016 and FSSC 22000 Compliance/customer requirements Review inspection plan, all Work Instructions, Quality Alerts and control samples prior to running production. Correctly record scrap on Production/Scrap Talley Sheets. Responsible for packing quality parts into boxes and making boxes. Correct application of all internal labels when required. Immediately notify Supervisor of all discrepancies to established quality requirements, operator Work Instructions. Communicate production and quality issues/concerns with Supervisors. Follow instructions from shift supervisors, quality techs, quality manager and plant manager. Provide assistance to support production as needed. Initiate action to prevent the occurrence of any non-conformities relating to the product, process and quality system. Responsibility of 5s and cleanliness in the shop. Responsible for keeping rate on the molding machine. All personnel working on Food Grade presses or assembly must notify supervisor immediately if they are ill or if they have any concerns that would potentially jeopardize food safety. Personnel must be aware of the relevance and importance of their individual activities in contributing to food safety. *Perform other duties as required or assigned in the support of the company's needs, goals and objectives. Requirements QUALIFICATIONS: Attention to detail, good hand/eye dexterity and ability to cross-train into other areas. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) preferred but not required. Plastic injection molding background is helpful, but not required. LANGUAGE SKILLS: Good oral and written communication skills. Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. MATHEMATICAL SKILLS: Basic math abilities, add, subtract, divide and multiply. REASONING ABILITY: Basic problem solving and reasoning skills. Excellent communication and interpersonal skill are important. CERTIFICATES, LICENSES, REGISTRATIONS: Must have a valid Driver's License. Must be willing to obtain certifications as the job warrants. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to stand, excluding breaks and lunch. The employee frequently is required to walk; use hands to handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 35 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and depth perception. WORK ENVIRONMENT: While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles, extreme heat and risk of electrical shock. The noise level in the work environment is usually moderate.

Description: Consolidated Metals is a leading manufacturer of steel tubing products. Join our growing, entrepreneurial company as a Machine Operator. Successful candidates must be self-motivated and reliable, have good communication skills, work well in a team-based environment, have a high level of mechanical aptitude, and be drug free. Prior cutting, warehouse, manufacturing, tube mill and/or Lean/Six Sigma experience are highly desired. The Machine Operator will follow all safety and quality procedures to efficiently perform work as assigned to meet customer requirements. Machine Operator Duties: Operate various equipment including Haven tube cutting machine, bundle saw, punch press and Innovo notch machine. Must be able to assure material is cut to length, punched or notched according to customer specifications. Perform quality inspections of all material upon arrival and during the handling process. Utilize tape measure, digital length gauge and computer system to ensure parts are produced to customer specification. Ensure your safety and that of your co-workers by following all safety procedures and wearing all required PPE while working with associated equipment and material. Requirements: Experience in Haven tube cutting required. Experience with punch press, Innovo notch, forklift driving, shipping and receiving and overhead cranes is helpful. Must be able to work 8 to10 hour shifts, 4 to 6 days per week depending on demand Ability to stand, bend, climb, squat and kneel continuously. Must be able to lift up to 20 lbs. frequently. Must be able to wear all required PPE at all times while performing. Preferred Experience, Education and Competencies: High School Diploma or Equivalent Demonstrate Safety, Quality, and Teamwork Abilities Excellent Attendance Prior manufacturing/fabrication experience is preferred Prior forklift and crane experience and/or certification is preferred Proficient with industrial tools and equipment Ability to read tape measure to 1/16” Ability to Cross Train Desire to grow within our company Requirements: Skills and Abilities: Ability to work in a safe manner Ability to recognize quality of material Demonstrated ability to perform Lock Out/Tag Out Demonstrated ability to follow specific instructions and directions Demonstrated ability to use and operate hand tools Demonstrated ability to stack material properly Ability to pay attention to surroundings Ability to identify safety issues in the work area and identify equipment malfunctions Ability to read a tape measure and read blueprints or plans Ability to troubleshoot the machine or equipment in use. Ability to understand efficiencies and productivity measures Ability to stand for long periods of time operating and tending to machines Ability to bend, twist and stretch Ability to work under immediate supervision Ability to pass a drug test Ability to work hours mandated by management Conduct Safety conscious Quality conscious Committed to constant improvement Team player and goal-oriented Punctual and reliable attendance Committed to the company's values of safety, honesty, reliability, collegiality, relentlessness, flexibility, and innovation Note: This job description is not intended to be all-inclusive. Employee may perform other related duties to meet the ongoing needs of the organization. Job Type: Full-time - Second Shift Benefits: 401(k) Health insurance Paid time off Training and growth opportunities Schedule: 8 to 10 hour regular shift Overtime as required Ability to commute/relocate: Elkhart, IN: Reliably commute or plan to relocate before starting work (Required)

Contract to Hire CNC Operator- Elkhart, IN All Shifts Available Pay: $16-$20 per hour Job Duties: · Set up and operate CNC machine · Use hand and power tools to assemble · Ability to read small print · May be cross-trained in other departments Requirements: · High School Diploma/GED preferred not required · Safety glasses and steel toed boots · Ability to lift up to 50lbs throughout the entire shift · Fast paced environment · Ability to stand, walk, bend and stoop · Ability to use hands to finger, handle and feel · Specific vision abilities required for various jobs include close vision, color vision, peripheral vision, depth perception and ability to adjust and focus · Ability to understand and communicate (talk-read-hear) work instructions Benefits: Holiday Pay Vacation Pay Health Insurance 401K Benefits Chance to win a brand-new car Referral bonus Specialized Staffing Solutions, LLC. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

We are building our Team of Night Shift Wire Spoolers & Wire Drawers! The ideal candidates for these positions will first learn the position of wire spooling, then after building their skills, they will learn the art of wire drawing; the process of taking bulk aluminum rod down to premium quality aluminum wire used in the welding process to make everything from bicycles, scooters, and lawn furniture to semi trailers and airplanes! Responsibilities include: * Perform work in a safe manner following all EH&S procedures and reporting EH&S concerns. * Accountable for production quality including, but not limited to, wire cleanliness, wire cast & pitch, and level layer winding. * Must read and follow written instructions to ensure customer demands are met and utilize a computer for inventory tracking and traceability. * Thread-up and operation of Wire Spooling machines. This may include the manipulation of up to 900-pound spools. * Winding of the aluminum wire onto carrier spools. * Boxing and packaging of carrier spools. Moving pallets utilizing an industrial fork truck. * Maintaining a clean and neat work area. * Support and participate in corporate initiatives that improve overall business performance as needed such as lean, EH&S, etc. If you are eager to learn, have a great work ethic including reliable transportation and attendance, and want to become part of our winning Team, we want to hear from you! Highlights include: * Competitive starting salary with multiple opportunities for competency-based increases * Generous shift premium of $1.50/hr * Core schedule of 4 10-hour shifts per week * Health, Dental & Optical Insurance on 1st day of employment * Up to 12 Company Paid Holidays * Paid Vacation & Paid Sick Time immediately available * 401(k) - 4% Company Match + Discretionary Company Contribution * Paid Parental Leave * Company Paid Life insurance at 1.5 base salary * Company Paid Short-Term & Long-Term Disability * Critical Illness, Accident & Hospital Indemnity Insurance * Working Advantage Employee Discount Program * Employee Assistance Program * Legal & Identity Theft Coverage Plans * Wellness Incentives and many more associate perks We are the technological leader and the world's largest producer of aluminum welding wire. ESAB/AlcoTec prides itself as a great place to start or continue a career in the manufacturing industry. With distribution in the US and throughout the world, ESAB is a truly global company with a rich tradition of industry leadership. We offer a trusted work atmosphere, competitive salary, room for advancement, generous benefits, and much more! Pay Range: $35,980.00-$41,184.00

Job Description 3rd Shift (10:30pm-06:30AM) $18.00 + $1.00/Shift Differential. Objective: The Machine Operator operates various machinery to tap, ream, form, sand, spot weld and/or rivet components in an exemplary manner according to the company quality policies. Qualified candidates will possess the following Minimum Requirements: Three months experience operating manufacturing machinery such as welders, riveters, grinders, tappers, or other assembly machinery An excellent work record, including attendance Ability to lift 25 pounds Operators are responsible for owning a set of approved calipers and micrometers (Minimum requirements are updated annually to meet the demands of various positions; employees hired prior to the latest revision update may not meet all current requirements) Essential Functions: Standard Work: Read, understand, and complete all production paperwork, including inspection check sheets, quality alerts, and standard work instructions in the job books. Follow set-up instructions when operating machines. Support activities in the change-over process. Read, follow, and complete tags. Use work scheduling system to proficiently start jobs, print labels, load components and raw materials, and close out jobs. Operate machines and/or presses to process parts via standard instructions, consistently maintaining appropriate production levels. Troubleshoot machines to ensure both part quality and maximum production levels. Manually repair parts as needed according to process instructions to meet customer specifications. Follow pack instructions according to customer specifications and prepare for shipping. Properly place scrap in the right container. Check the Total Preventative Maintenance of the machines, and if measurements are found to be out of the defined ranges, notify the Team Leader. Perform other duties as required to support production as directed by the Team Leader. Continuous Improvement/Lean Principles: Efficiently utilize machine downtime. Participate in, and support lean initiatives such as continuous improvement events and problem solving events, identifying and eliminating all types of waste. Document cost savings, consolidate processes, and eliminate unnecessary operations. Suggest and implement ideas to increase personal and departmental efficiency. Anticipate problems and work to eliminate them before they happen. Quality: Follow control plans (inspection sheets) to complete first piece and in-process checks. Conduct quality checks per check sheet and quality alerts, including visual inspections. Use calipers, micrometers, thread gages, height gages, rind gages, and other quality items as required by work center in order to ensure the production of quality parts. Stop production and notify Team Leader when a non-standard condition is found. Operate the CMM and interpret CMM reports. Safety/5S: Follow all safety procedures, including Personal Protective Equipment (PPE), controls, safety devices and use of coolants. Identify potential safety issues and take appropriate action, bringing to the attention of leadership. Organization/Communication/Professionalism: Effectively communicate with co-workers and management personnel to enhance teamwork and communication initiatives. Provide necessary, accurate, and timely feedback of all pertinent information to co-workers and management. Consistently exhibit appropriate attendance habits, working the hours necessary to perform the job. Organize and maintain efficiency of personal work area. Consistently adhere to, and support, company policies and procedures, including ISO, IATF 16949, and safety regulations. Accept instructions and duties in a positive manner. Treat all co-workers with dignity and respect. Exhibit all the attributes of a positive role model (including professionalism, personal integrity, and positive attitude) for employees and managers to emulate. Assist in maintaining company values (Integrity, People, Customers, Safety, We Can If...Do What It Takes, and Ownership) daily, through thoughts and actions. In return, Pridgeon and Clay will provide: A competitive total compensation including a comprehensive benefit plan including premium medical and prescription coverage starting at just $5.00 per week for employee coverage, dental, vision, 401(k) with company match, and tuition reimbursement. A safe, team oriented work environment with a leadership team that treats you like family and values your input An opportunity to participate in shaping the success of the organization through continuous improvement and problem solving events A positive work/life balance An opportunity for career growth - Over 70% of our leaders have been promoted from within IMPORTANT- PLEASE READ COMPLETELY BEFORE SIGNING APPLICATION PRE-EMPLOYMENT STATEMENT Equal Opportunity Policy: We are an Equal Opportunity Employer. We will consider applicants for this position without regards to any category protected by applicable federal, or local law, including but not limited to: race, color, religion, sex, national origin, age, physical or mental disability, genetic information, veteran status, or uniformed service member status. Background Check and Release of Information: I hereby authorize P&C Inc. or its appointed investigative agencies to substantiate and verify my past employment, previous salary history, professional credentials, academic degrees and any other necessary references. I also authorize my previous schools, employers, and listed references to release to P&C Inc. or its appointed investigative agencies, any relevant information, including transcripts, that may be requested in connection with my employment. If employed, I authorize P&C to release salary and benefit data as necessary to meet business needs. I agree that P&C Inc. and my previous employers, schools, and references shall not be held liable if any employment offer is not tendered, is withdrawn, or my employment is terminated due to falsity or omissions in the information I have provided. Need for Accommodation: If I have a disability that requires accommodation to do my job, I must notify the company of that need, in writing, within 182 days after I know or reasonably should have known that I needed accommodation. Failure to do so will bar me from alleging that the company failed to accommodate me under Michigan (but not federal) law. Policies and Procedures: If employed by P&C Inc., I understand and agree that such employment is subject to the policies and procedures of the company. I understand and agree that any employment offer I might receive is contingent upon execution of the Confidentiality Agreement, I-9 and this application. I further agree to wear or use, when prescribed by the company, safety equipment or protective devices and to comply with all health and safety rules and reporting requirements. I agree to abide by all administrative policies of the company. Direct Deposit: I fully agree without fear or intimidation, coercion, or reprisal, to have any compensation that I receive directly deposited into the bank, credit union, or savings and loan association of my choice. I acknowledge that if I do not provide direct deposit information, compensation will be deposited to a pay card provided by the employer. Terms and Conditions: I understand that no statement in this form, related administrative policies, or an offer of employment is to be construed as an employment contract, and that either party, without the other's consent, may terminate the employment relationship at any time for any reason with or without cause or notice. Any agreement that varies the right of the employee or P&C to terminate the employment relationship at any time, with our without cause or notice, will be null and void. Limitation of Claims: If hired, in consideration of my employment, I agree to abide by the rules and policies of this company, including any changes from time to time, I agree that any lawsuit or claim against the company arising out of my employment or termination of employment (including but not limited to, claims arising from state, federal, or local civil rights laws) must be brought within the following time limits or forever be barred; (a) for lawsuits requiring a notice of rights to sue from the Equal Employment Opportunity Commission, within 90 days after the EEOC has issued that notice: or (b) for all other lawsuits, within (I) 180 days of the event(s) giving rise to the claim or (II) the time limited specified be the statute, whichever is shorter. I waive any statutes of limitations that exceeds this time limit. Confidential Agreement: I also understand and agree that I will not disclose or use any and all P&C confidential and proprietary information that I may acquire in the course of the recruitment process, in the course and scope of my employment, as well as after my employment with P&C. Pre-Employment Background Check: All applicants must pass a background check prior to beginning work. Refusal to allow the company to run a background check will result in disqualification of further employment consideration. I hereby affirm that the information provided on this employment application form and on my resume is true and complete to the best of my knowledge. I understand and agree that falsified information or omissions may result in termination from employment if discovered after my employment has begun, and that the offer of employment may be rescinded. With my signature on this application, I hereby agree to all terms above. Job Posted by ApplicantPro

Description: The Machine Shop Machine Operator manufactures machined products, focusing on machine operation, machine set-up, equipment maintenance, process monitoring, productivity, quality, continuous improvement and safety. Supervisory Responsibilities: None. Duties/Responsibilities: Primary function to operate all assigned production equipment including startup, shutdown, light set-up, materials handling, and feeding of production for machines including manual and/or computer controlled turning and machining centers such as Burgmaster, CNC vertical mills, and lathes, Swiss lathes, manual machining equipment, auxiliary support systems, new and specialty equipment. Produces the required quantity of parts within established specifications and tolerances. Operate machining equipment to produce products by cutting materials including finishing, grinding, polishing, sharpening, drilling, beveling and create relief. Measures finished parts with precision tools, ensuring compliance with function, quality, and cosmetic specifications. Maintains logs and records of units produced including a record of errors resulting in rejected or discarded pieces. Inspects equipment prior to use to ensure proper setup and alignment; performs basic and routine adjustments and maintenance. Maintains a clean, safe, and orderly work area. Perform light maintenance functions including change machine filters, check and grease machine slides, check and change coolant, scrap removal between materials changes. Performs other related duties as assigned. Reports to department lead, supervisor and/or manager. Requirements: Required Skills/Abilities: Ability to follow directions and work well in a team. Ability to interpret and translate engineering designs and documentation. Thorough understanding of or the ability to quickly learn production equipment. Strong analytical and problem-solving skills. Understanding of and the ability to abide by applicable OSHA and environmental regulations. Collect, analyze and interpret data using basic statistical tools such averages, range and graphs. Basic math skills including addition, subtraction, multiplication and division. Basic Quality Standards and Concepts literacy Education and Experience: High school diploma or equivalent required. Prefer at least one year of related experience. Other certifications, training or requirements as may arise for this position as communicated by management. Completion of on-the-job training may be substituted for educational requirements. Physical Requirements: Prolonged periods working on feet, using tools, and performing repetitive actions that entail frequent bending and stooping. Must be able to lift up to 30 pounds at a time or move or position objects up to 50 lbs. Visual acuity to read instructions, operate machines, and inspect parts produced. May be required to repetitively move or position materials, tools, equipment and objects above and below shoulder level, and from side to side of body. May be required to communicate, discern, convey, or exchange information with other teammates. Must be able to wear all personal protective equipment at all times during work hours as required by company safety rules. Other duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Title: Entry Level Machine Operator Department: Tanks Reports To: Tanks supervisor Prepared By: HR is utilized to fill any roll needed throughout the division. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to be trained and certified to drive a forklift Understand the material flow through the production process and able to safely and efficiently transport material to and from each workstation to keep the production process moving. Various jobs will require you to handle products weighing up to 60 pounds safely and effectively for a high-volume process. Utilize hand tools to cut, trim, scrape, route, spin weld, drill, screw, and other various tasks as related to the individual job functions. Maintain work area and equipment in a clean orderly condition and follows prescribed safety procedures and PPE. Inspect tanks for non-conformances such as: Wall thickness, neck size and thickness, corner thickness, overall weight of tank. Must be able to operate a forklift to assist in the loading and unloading of parts. Follow all safety guidelines and procedures. Perform other duties as assigned. Education and/or Experience: No experience necessary. This is an entry level position. High School Diploma or GED. Mathematical Skills: Must have basic math skills. Reasoning Ability: Must have the ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. It would be beneficial to have the ability to use an I.R. gun. This measures temperature on the machine and parts. Computer Skills: No computer skills needed. Physical Demands : The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is required to; The employee must frequently lift and/or move up to 60 pounds and occasionally lift and/or move up to 60 pounds. Able to handle frequent twisting and bending The employee is occasionally required to walk and occasionally sit for forklift operation. Good hand dexterity. Able to stand for 8 hours at times or more a shift. Frequently required to use hands to handle or feel; reach with hands and arms; and talk or hear. The employee must have the ability to use a saw, straight line grinders, fixtures and a drill gun. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles and vibration. The noise level in the work environment is usually moderate to loud.

Come join a leader in Protective Foam Solutions! At Alleguard, we're built from the ground up to expand and shape our customer's businesses. We understand the diversity of challenges that customers are facing across different industries, from confidence in their supply chain to needing the latest innovations at their fingertips. These challenges are also opportunities, and whether our customers are in construction, protective packaging, cold-chain or other industries, we are relentless in seeing around corners, and going the extra mile to help their business succeed. Position: 2nd Shift Machine Operator Job Summary We are looking for a Machine Operator to work directly under our Floor Supervisor. This position will gain first-hand knowledge of EPS manufacturing processes. Pay: $18 USD/hr Responsibilities Machine operator for hot wire cutting lines with efficient consistent workflow to maximize efficiency while adhering to company policies and safety procedures. Stretch wrap bundles as needed/palletizing. Track block numbers. Tape measure/ruler knowledge. Adaptive to change (Moving from one line to another). Qualifications Hardworking and enthusiastic personality. Must be minimum of 18 years of age. Critical thinking and problem-solving skills. Excellent written and verbal communication skills. Ability to work independently with limited supervision. Able to manage and set priorities in a changing environment. High degree of self-motivation and flexibility. Analytical and structured work approach. Physical Demands Position may require periods of intense physical exertion in conditions of low to high temperatures and humidity. Position requires the ability to stand, bend, and stretch over extended periods of time during a normal work shift. Must be able to lift 50 lbs. Schedule Monday through Friday 3:30pm - 12:00am Flexibility is a must - hours subject to change based on production schedule Benefits We believe in taking care of the people who take care of our customers. Our benefits package offers eligible team members access to: Medical Insurance Dental Insurance Vision Insurance Basic Life and AD&D Insurance Retirement Program (401k) Short Term Disability Long Term Disability Flexible Spending Accounts Health Savings Accounts Employee Assistance Program Vacation and Holiday Pay Alleguard Company Values Safety - We care for our employees by creating and maintaining an environment with consistent actions, trusted processes, and courageous conversations. Trust - We build confidence with our employees and customers through dependability, respect, clear communication, and service. Integrity - We are consistent in always striving to do the right thing by accepting responsibility for our decisions and actions. Collaboration - Our diversity is the catalyst that drives our teamwork, creative problem-solving, and partnership. Growth - We invest, develop, and empower our people to build our company so our customers will experience outstanding success, in turn contributing to our own. Accountability - We achieve our success by holding ourselves and each other to high standards of behavior, commitment, and personal responsibility. Come join us! We're a dynamic, high-growth business, invested in helping you grow with Alleguard. Many of our colleagues have been with us for decades. That's because we believe in collaborating as a team to serve and support each other as well as we serve and support our customers. Alleguard's employee-centric culture is designed to help you maximize your talents, learn new skills, and gain valuable experience on the way to achieving your professional goals. *Hiring process typically takes about 1 week to complete*

Machine Operator III - All 3 shifts SUMMARY - Set-up, adjust and safely operate on a variety of machines to cut and slot partitions from several types of roll stock to specifications. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Work from pattern to mount and adjust dies, guides, feed, speed, tension, etc. Recognize any and all operating problems and make adjustments to accommodate subtle stock variations, worn dies, humidity, etc. May move and change rolls, make routine machine repairs, including lubrication. Move strip loads and scrap loads. Operate machines and hand tools, hand and power trucks. Use the following inspection and test gear: board gauge, rule, patterns and stop watch (to time production speed). Full responsibility for set-ups and/or work preparation. Seek coordinator's help under unusual circumstances. Responsible for product quality. (Set-ups are checked by others.) Record and report times and material produced. Record and report production and/or equipment problems. May answer questions in stacking and packing procedures. Report personnel inadequacies. Participate in cross-training. Practices and promotes safe work practices. Report unsafe working practices. Maintains a satisfactory productivity rating. Proactively helps to create and work within a team-based environment and practices effective communication skills. Trains other team members and retain and apply job knowledge. Demonstrates good problem-solving skills. Notifies appropriate personnel of machine repairs and/or any unsafe conditions. Possess a working knowledge of material/ inventory identification. Requisitions parts and supplies. Works from a manufacturing requirements schedule. Performs routine preventive maintenance as necessary. Performs other duties as required. QUALIFICATIONS - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Practical application of each is required. EDUCATION and/or EXPERIENCE - High school diploma or general education degree (GED); and one to three years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS - Ability to read and comprehend simple instructions, short correspondence, and memos in English. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and reach with hands and arms. The employee frequently is required to walk and use verbal and listening skills. The employee is occasionally required to use hands and fingers to operate a computer keyboard, mouse, calculator and telephone; climb or balance; and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds. Benefits: Health benefits: medical, dental, and vision Wellness Program Paid Time Off (PTO) Holiday pay Company 401(k) match Tuition reimbursement Climate controlled facility Company-paid short-term and long-term disability Company-paid life & AD&D insurance

Machine Operator | Utilimaster | Bristol, IN (Main) Regular Employee | Hourly Non-Exempt | $0.00 - 0.00 What you'll do: Set up and operate sheet metal fabricating machines, such as press brakes, shears, turret punch presses, saws, and presses, to cut, bend, and form sheet metal according to blueprints and specifications * Ability to work in a fast-paced, high-speed environment, follow standardized work and adhere to safe work practices in a continuous improvement environment * Experience in a manufacturing environment is a plus * Perform necessary pre-operation activities to ensure proper equipment startup and operation on multiple pieces of equipment * Operate/monitor multiple pieces of equipment during operation to ensure quality production and minimal unplanned stops * Communicate with team members and support teams to ensure continuous production of the correct product at high quality levels with minimal wasted time and materials * Perform the above within acceptable quality, quantity, performance, and safety standards #TSG123 What you need to be successful: * Math skills including converting fractions to decimals * Ability to read a tape measure * Ability to read a blueprint or be trained to read a blueprint * Problem solving skills * Capable of lifting 50 pounds and sliding 100 pounds without assistance * Clean department and maintain neatness in the surrounding work areas * Attention to Detail * Teamwork * Work Independently * Multitask Why The Shyft Group? Our people are our greatest asset, and your success is our success! That's why we provide comprehensive benefits that support your health, financial security, and work-life balance-so you can thrive both personally and professionally. * Health & Wellness: Medical, Dental, Vision, HSA/FSA, Wellness Plan * Financial Security: 401(k) with match, Disability, Life Insurance * Work/Life & Growth: Educational Reimbursement, EAP, Dependent Care At The Shyft Group, we don't just offer benefits-we invest in your well-being. Join us and experience the difference! Who we are: The Shyft Group is the North American leader in specialty vehicles, including last-mile delivery vans, work trucks, and motorhome chassis. Our 10 brands- Utilimaster, Blue Arc, Royal Truck Body, DuraMag, Magnum, Strobes-R-Us, Spartan RV Chassis, Red Diamond, Builtmore, and Independent Truck Upfitters- are powered by 3,000+ team members across the U.S. and Canada. Backed by 50 years of innovation and a supportive, entrepreneurial culture, we're leading the way in electrification and proudly ranked among Fortune's 100 Fastest Growing Companies. Equal Employment Opportunity (EEO) The Shyft Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, genetic information, status as a protected veteran or status as a qualified individual with a disability, or any other characteristic protected by applicable federal, state, or local law. If you have a disability and would like to request an accommodation in order to apply, please email us at *************************. The Shyft Group is an E-Verify Employer Shyft uses E-Verify, which is an online system operated by the U.S. Department of Homeland Security in partnership with the Social Security Administration to verify employment eligibility and validate social security numbers. Through participation in the E-Verify program, information entered on Form I-9 will be provided and compared to information available at both of these agencies. See posters for more details. E-Verify Notice U.S. Right to Work Notice.

Machine Operator I is responsible for the set up and operation of a production machine in accordance with established procedures and guidelines. Secures and maintains material and supplies required on the operation. Principle Duties and Responsibilities Completes work area set up. Operates and feeds the machine in a safe and efficient manner, and according to established procedures. Stacks completed products in accordance with established procedures, and if required, may cover, label and band components/finished product. Ensures work area is safe, clean and organized, and that equipment is safe to operate. Completes pre-shift/startup equipment inspection checklist and reports any problems or concerns. Maintains a clean and orderly work environment. Maintains production records as required. Checks materials and finished products to ensure compliance with standards. Performs duties consistent with established safety and quality procedures, rules, and standards. Participates in safety, CI and other programs and meetings. Performs other duties as assigned. Qualifications High school diploma/GED is preferred but not required. Minimum of 6 months of experience in manufacturing and/or assembling is required. Working knowledge of basic math preferred High school diploma/GED preferred but not required. Must be at least 18 years of age. The Company is an Equal Opportunity Employer.

Machine Operator (nights) - Plastics Reports to: Dan Vukcevich The Machine Operator is responsible for operating assigned machines. Will monitor and ensure safety, environmental responsibility, quality, value-add, morale, peer performance, and continuous improvement standards are met. Will coordinate the daily run schedule with the machine supervisor. Accountabilities Run the machine within the prescribed operating parameters while trying to achieve the machines fullest potential. Monitor machine performance and product quality with an understanding of all the machine adjustments that affect performance and quality. Perform maintenance and repairs as needed. Monitor the safety and environmental controls to make sure we are operating within the prescribed parameters of our work instructions. Detect and report defective materials or questionable conditions to ensure safety and quality. Prepare and submit paperwork for production, maintenance, inventories, receiving, and others as necessary. Assist by operating small equipment to maintain operations as needed. May also sort or operate at other production machines. Work to ensure a clean and orderly work area and operate mobile equipment using safety regulations. Qualifications Must have strong mechanical understanding and ability. Experience working on conveyors, machinery, equipment, building trades, welding, torching, agriculture background, or working on personal vehicles preferred. Ability to maintain accurate and detailed records. Ability to multi-task and work in a fast-paced environment. Ability to work independently and as part of a team. Demonstrated safety consciousness. Must be able to lift at least 50lbs. PADNOS is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, weight, height, sex, sexual orientation, marital status, national origin, age, genetic medical information, protected veteran status, or disability status.