Machine operator jobs in Oklahoma City, OK - 108 jobs

The Saw Operator is responsible for operating air and hydraulic table saws to cut extruded metal to the required lengths according to work tickets. This position requires attention to detail, quality inspection, and the ability to maintain pace with the extrusion press while ensuring proper material handling. Responsibilities Operate saws (Oliver, chop, and table saws) safely and efficiently to keep pace with the extrusion press. Cut material accurately to specified lengths according to work ticket requirements. Inspect extruded metal for flaws and cut out defective sections Record the number of pieces cut on saw tickets and maintain separate records for reference Stack material on aging carts with minimal damage to finished product Check metal for proper length, hole spacing, carpet barbs, and hammering patterns to ensure quality specifications are met Assist with loading dummy blocks in the extrusion press as needed Process scrap material for recycling and load onto scrap trailer Maintain a clean, neat, and orderly work area Perform other duties of equal or lesser complexity as assigned Interact professionally with all employees Minimum Qualifications Ability to operate air and hydraulic table saws to cut extruded metal according to specifications Ability to read and interpret work tickets and shop papers Proficiency in using tape measures and checking measurements Basic writing and math skills for completing daily production records Basic verbal communication skills for understanding work assignments and reporting issues Good motor skills and hand-eye coordination for efficient and safe operation Ability to stand for 10-12 hours per shift Ability to lift between 50 and 100 pounds High school diploma or GED preferred Previous experience in manufacturing or metal fabrication is helpful but not required. On-the-job training will be provided Equipment Used Safety equipment: safety glasses, safety shoes, ear plugs, face shield, gloves, and hearing protection Machinery: Oliver saw, chop saw, and air stop Other equipment: electrically controlled tables, aging racks, roll-around carts, hand tools Work Environment 2nd shift hours: 4:00 PM - 2:30 AM Monday- Thursday Located in the immediate saw area of the metal processing department High noise levels require hearing protection Verbal communication may be difficult due to noise levels Non-air-conditioned environment Concrete flooring with no floor covering What We Offer: Stable work schedule Team-oriented environment Opportunity for growth Training provided Benefits: M-D Building Products, Inc offers a benefits package that includes Medical, Dental, Vision, On-Site Clinic, Voluntary Life Insurance, Lab Card Program, Group Term Life & AD&D, Flexible Spending Accounts, Dependent Care Flexible Spending Account, Short-Term and Long-Term Disability, 401(K) with Company Match, Paid Time Off, Tuition Reimbursement, Education & Development, Mental Wellness (Employee Assistance Program), and Voluntary Benefits including Accident, Critical Illness and Hospital Indemnity Insurance. M-D Building Products, Inc. provides equal employment opportunities for all current employees and applicants. This policy means that no one will be discriminated against because of race, religion, creed, color, national origin, nationality, citizenship, ancestry, sex, age, marital status, physical or mental disability, affectional or sexual orientation, gender identity, military or veteran status, genetic predisposing characteristics or any other basis prohibited by law. Location: Oklahoma City, OK Please submit a complete application detailing any relevant experience. If you're new to warehouse work, highlight any transferable skills and your willingness to learn. We value attention to detail in the application process as it reflects the precision required in this role. Physical demands include continuous standing and walking, intermittent bending, twisting, reaching, lifting, and carrying, with occasional climbing, crouching, and lowering activities.

Job Description AERONES, a Global Leader in advanced Wind Turbine maintenance and robotics, is seeking a Wind Turbine Robotics Operator focused on Robotics services to join our U.S. Operations Team. This position is also known as Wind Field Technician. We specialize in cutting-edge robotic solutions that ensure safety, efficiency, and top-tier service for the wind energy industry. In this role, you'll have the opportunity to travel to wind farms across the country, with all accommodation and travel expenses fully covered by the Company. You will be performing inspections, maintenance, repairs, and upgrades on wind turbines - ensuring peak performance and safety standards are met. GWO Basic Safety Training (BST) and GWO Advanced Rescue Training (ART) Full certifications will be required to undertake the role. Job Tasks and Responsibilities: Maintenance and operation of robotic systems used for cleaning, inspection, and repair of wind turbines. Performing routine inspections on turbines to ensure optimal performance and compliance with safety standards. Preventative maintenance on wind turbines and associated systems to reduce downtime and maximize energy production. Fault diagnosis and resolution of technical issues using advanced diagnostic tools and technology. Reporting and documentation of work completed, including identifying issues, repairs, and maintenance performed. Ensuring adherence to safety protocols and industry standards. What We Offer: Stable, long term employment with career growth in a rapidly expanding, innovative Company Competitive hourly rate: $22.50 - $30.00 per hour (based on experience) $60 a day meal per diem Paid travel and lodging for Projects nationwide Work with a Global Team pioneering the future of wind turbine technology What We're Looking For: Strong mechanical and electrical troubleshooting skills Ability to travel frequently and work in Field conditions Previous experience in wind turbine maintenance is an advantage Requirements The minimum requirements to be considered for this role include: Applicants must be legally authorized to work in the United States. We are unable to sponsor Visas at this time. A Valid Drivers License Basic Computer skills Willing and able to undertake a Physical Check (Medical) to ensure ability to undertake the responsibilities of the role (working in confined spaces, climbing, lifting etc). Nice to have: GWO Basic Safety Training (BST) GWO Advanced Rescue Training (ART) Full GWO Basic Technical Training (BTT) OSHA 10 NFPA 70E Electrical safety awareness First Aid GE / Vestas / Siemens Gamesa / Nordex Turbine Operations / LOTO GWO Sea Survival Benefits We believe great work starts with feeling valued and supported. That's why we are building an thoughtful, competitive benefits and perks to help you thrive - professionally and personally - through every step of your Career with us. You will be eligible for: Health Insurance Medical (80% Employer contribution) Dental Vision Term Life Paid Time Off (PTO) - 10 days Aerones is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to Race, Color, Religion, Sex, Sexual Orientation, Gender Identity or Expression, National origin, Age, Disability, Veteran Status, or any other legally protected status. Employment decisions are based on qualifications, merit, and business needs. AERONES - Build the Future!

Job Title: Packager / Production Associate (Brick Packer) Pay: $17.00/hour to start Pay Growth: $21.00-$24.00/hour after hire-on (based on production) Hours: Monday-Friday | 5:30 AM until finished (typically 2:00-4:00 PM) Saturdays: 5:00 AM until finished (typically 10:00 AM-12:00 PM) Location: Oklahoma City, OK 73114 Job Type: Temp-to-Hire Job Order #: 123187 Position Overview We are currently seeking dependable Packager / Production Associate (Brick Packer) team members to join a brick manufacturing facility in Oklahoma City. The Packager / Production Associate (Brick Packer) plays a critical role in a fast-paced, production-driven environment, responsible for stacking, packaging, and preparing finished brick for shipment while maintaining safety and quality standards. This is a physically demanding role with strong earning potential for consistent, high-performing employees once hired on. Key Responsibilities Stack finished brick onto pallets as it comes off the production line Strap and wrap packaged brick for shipment Inspect brick for defects or damage Maintain pace with production speed and line requirements Keep work areas clean, organized, and safe Work safely around conveyors and moving equipment Follow all safety procedures and production guidelines Assist with other production-related duties as assigned Work Environment Hot, dusty, industrial manufacturing setting Standing for the entire shift Repetitive lifting up to 60 lbs Fast-paced, team-oriented production environment Overtime and Saturdays required during peak production Requirements & Qualifications Ability to lift up to 60 lbs repeatedly Ability to stand for extended periods of time Strong work ethic, reliability, and attendance Ability to maintain pace in a production-based environment Strong focus on safety and quality Ability to work effectively as part of a team Must pass a drug screen and background check Perks & Benefits Weekly pay $50 advance available after your first day of work Significant pay increases after hire-on based on production

Job DescriptionLocation: OKC Plate Laser Operator Pay Rate and Hours: $22-25/hr Monday through Friday, OT as needed, Regular hours: 6am-2:30pm, OT hours: 5am-3:30pm. Operates a CNC Amada plate laser Load raw materials and unloads finished parts Plate Laser Operator Basic Requirements: Experience running an Amada laser is a plus. Must be able to setup the machine and create nesting programs. Minimum 2 years' experience running a plate laser. Forklift and overhead crane experience a plus. Must be able to communicate and understand English This is a temp to hire position. Key Personnel Benefits: While on Key Personnel's payroll, you can access Key's benefits package, including health, dental, vision, term life insurance, short term disability, PTO and more! Apply today! In order to make the best use of your time, only qualified applicants will be contacted. Our office is at 5600 N. May Ave. Suite 310, Regus Building, Oklahoma City, OK 7311. It is located on the third floor of the Regus Building. Take a right off the elevators. Please bring a resume and ID to complete the I-9 form between the hours of 9 am and 3 pm, Monday through Friday. Key Personnel is an Equal Opportunity Employer. #INDLIOK46

Benefits: * Fuel Your Growth with Love's - company funded tuition assistance * Paid Time Off * 401(k) - 100% Match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Welcome to Love's: Production Operators in our corporate print shop are responsible for the efficient operation and maintenance of CNC Router equipment, producing high-quality signage, displays, and custom print products using rigid plastics, aluminum, and roll materials. Operators ensure jobs are completed on schedule, consistently meeting department standards for quality and customer service. Daily equipment maintenance and workspace organization are essential. Job Functions: Operation and maintain CNC Router and ancillary equipment in a print shop environment Prepare and setup production files in EnRoute Review department job tickets and managed workflow to ensure all orders are completed on time Maintain the work area and equipment in a clean, orderly, and organized condition Monitor job queues and output performance to ensure projects meet quality standards Troubleshoot and maintain equipment to minimize downtime Conduct quality control checks and create hard copy proofs for internal proofing Maintain accurate records of work performed and product generated, utilizing internal job tickets and tracking systems Ensure consistency of database information, file structure and archiving Collaborate with print shop team members to coordinate production schedules and resolve issues Communicate job status and potential delays to management Follow all safety procedures and company policies related to equipment operation and material handling Experience and Qualifications: At least 1 year experience working with digital or offset printing/finishing equipment Experience working with rigid and roll materials, custom finishing including packaging, mounting, and trimming Strong understanding of printing operation and maintenance Ability to manage multiple projects and deadlines in a fast-paced environment Proficiency in relevant software and technology Prior experience operating CNC Router equipment preferred, training available for qualified candidates Familiarity with EnRoute or similar CNC software is a plus Skills and Physical Demands: Strong verbal and written communication skills Keen attention to detail, ability to multi-task, strong organization skills Flexible and self-motivated to take on additional tasks Must be a team player that is detail-orientated and thorough in completing work tasks Ability to safely operate CNC machinery and power tools Requires prolonged standing, bending, stooping, and lifting up to 100 pounds Requires normal range of hearing and vision Shift work is common, as is overtime in order to meet deadlines Adaptability to changing priorities in a print shop environment Our Culture: Fueling customers' journeys since 1964, innovation leads the way for this family-owned and operated business headquartered in Oklahoma City. With nearly 40,000 team members, travel stops are the core business along with products and services that provide value for professional drivers, fleets, traveling public, RVers, alternative energy and wholesale fuel customers. Giving back to communities and an inclusive workplace are hallmarks of the award-winning culture. Love's is an Equal Opportunity Employer. Veterans encouraged to apply. Job Category: Other

TEAM UP WITH US! The Machine Technician II is responsible for providing high quality repair service on equipment, in order to respond to customer needs in a positive, caring and timely manner and to ensure maximum value for work performed. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Complete assigned jobs and task to meet flat rate times and re-do metric. * Work safely and follow all WCAT safety policies and procedures. * Complete related paperwork and access databases required to complete job (work order, parts order, JSA, DBS, SIMS, SIS web, STW) accurately and timely. * Follow contamination control and HAZMAT rules and regulations * Remove and install parts, disassemble and assemble components, and test and adjust assemblies with minimal supervision. * Diagnose and troubleshoot problems, give recommendations for repairs and make all critical machine and engine repairs and adjustments. * Test and verify correct operation of all repairs and adjustments. * Apply general failure analysis and procedures to determine proper diagnosis. * Adhere to all company policies * Complete all Level I & Level II assigned training in a timely and proficient manner. WHAT YOU'LL NEED: * High school diploma or general education degree (GED); or three to five years related experience and/or training. * In depth knowledge of basic hand tools, air tools, precision measuring tools and instruments, lap tops, diagnostic software and cranes and rigging equipment. * Ability to provide accurate information to management for quoting. * Able to mentor Machine team members, * Must be able to obtain or currently possess adequate tooling to perform duties. * Must be at least 21 to be assigned and operate field vehicle. * Successfully complete Work Steps assessment, * Will be certified prior to operating a forklift and/or man lift, * May be required to complete DOT physical, * May require MSHA certification Other Skills and Abilities, * Must be certified in air-conditioning, * Flexibility to work various schedules including shift work, required overtime and on call, WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to climb or balance. The employee is occasionally required to sit or smell. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Required travel up to 20%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Keywords: mechanic, heavy equipment mechanic, diesel mechanic

Plate Laser Operator - OKCPay: $22 - $25/hour Schedule: Monday-Friday (hours as scheduled) Type: Temp-to-Hire (after 90 days) People Source OKC is currently hiring experienced Plate Laser Operators to run CNC Amada plate lasers in a fast-paced industrial environment. This role requires machine setup, creating nesting programs, loading/unloading materials, and ensuring quality production.Qualifications Required: Minimum of 2 years' experience operating a plate laser. Ability to set up the machine and create nesting programs. Strong communication skills and ability to understand English. Preferred Skills: Experience running an Amada laser. Forklift and overhead crane experience. Duties & Responsibilities (Summary): Operate CNC Amada plate laser safely and efficiently. Set up machines and program nesting for production runs. Load raw materials and unload finished parts. Inspect parts for quality and adherence to specifications. Maintain accurate production records. Assist with warehouse or material handling tasks as needed. Perform additional duties as assigned. Job Requirements: Ability to work safely in a fast-paced industrial environment. Must pass a background check. Must pass a drug screen (OMMA card not accepted). ?? Important Note - Safety Sensitive Role This position is classified as Safety Sensitive under Oklahoma law (O.S. § 63-427.8). Individuals with a medical marijuana license may be disqualified from consideration due to safety regulations.Why Work with People Source OKC? Weekly pay Direct deposit Medical plan available Referral bonuses Access to 50+ clients weekly-we work to find you the right job! ? Apply today and let People Source OKC help you find your next opportunity! #OKC1

Wilbert Funeral Services, Inc. As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Assembles minor products or components with a small number of details within routine and highly repetitive assembly operations. Typically works at a workbench or on a conveyer line. Common tasks include checking, sorting, packaging, labeling, pasting, sniping, tying, or trimming either manually or by machine. Performs basic equipment adjustments, routine maintenance, and cleaning. May perform miscellaneous jobs such as moving assemblies/machines or cleaning floors. Typically has 0-2 years of experience and works under close supervision. Typical job titles include: General Labor, Machine Operator, Maker/Packer, Assembler and Line Operator. * Learn and become proficient in all aspects of manufacturing, including operating mixers, stripping products from forms, cleaning and oiling forms, applying Unidex bonding mixture and butyl seal, and placing concrete in forms. * Cut and bend rebar and wire for reinforcement purposes. * Perform minor repairs to forms and other related equipment in the manufacturing process as needed. * Utilize various hand tools required for manufacturing tasks. * Ensure that the casting forms have clean and straight edges to produce visually appealing products. * Stock products from the previous day after applying a clear seal to the outside of the vaults. * Retrieve aged products from stock and paint them for the next day's orders. GED & High School Diploma * Possession of a valid driver's license with a clean driving record. * Ability to pass a new hire drug test and undergo random drug screens. * Capability to lift 75+ lbs. * Proficiency in reading maps and understanding directions. * Strong attention to detail. * Excellent organizational and communication skills. * The ability to work outdoors in various weather conditions. * Capability to lift 75+ lbs. * Physical requirements include lifting, standing, bending, stooping, twisting, turning, kneeling, and squatting for short periods. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Temp Fabrication Technician Pay Rate/Range: $15 to $18 Description: Maintain locate and organize raw materials through all areas of the fabrication/Weld shop per schedule and bill of materials (BOM). The fabricator should possess the ability to read, and comprehend blueprints and manufacturing instructions. The ability to safely operate plasma table, band saw, brake press and blast booth. Other duties may be assigned. Job Requirements: Read and comprehend blueprints, manufacturing instructions and Bill of Materials (BOM). Follow production schedule. Verify all correct material per BOM. Ability to safely operate brake press, band-saw, plasma table and blast booth. Ability to understand tank prep operation including pressure test and prep for paint. Must be able to safely operate various hand & power tools. Read and understand tape measures variances up to 1/16 and the ability to convert to decimals .0625. Safely operate crane and pallet jack/fork lift. Follow direction; maintain focus and a positive attitude. Competent in required job skills and knowledge; exhibits ability to learn & apply new skills; keeps abreast of current developments; requires minimal supervision; displays understanding of how job relates to others; uses resources effectively. Is consistently at work and on time; ensures work responsibilities are covered when absent; arrives at meetings and appointments on time. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; completes tasks on time or notifies appropriate person with an alternate plan. Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly. Must be able to pass a pre-employment drug screen and physical. Complete a satisfactory nationwide criminal background check. Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information to employees within the organization. Ability to add, subtract, divide, in all units of measure using whole numbers, common fractions and decimals. Ability to apply common sense to practical problems and interpret a variety of instructions furnished in written, oral, diagram or schedule form. Individual shall have basic computer knowledge. Physical Demands - regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. Employee is occasionally required to sit; climb or balance and taste or smell. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include peripheral vision, depth perception and ability to adjust focus. Work Environment - employee is frequently exposed to wet and/or humid conditions nd fumes or airborne particles. Employee is occasionally exposed to moving mechanical parts and high, precarious places. Noise level is usually moderate. Job Type: Contract-to-Hire Shift/Schedule: 1st or 3rd shift available 4 10-hour days, 2 8-hour days required weekly 56+ hours weekly Qualifications HS Diploma or GED 2 years or more in manufacturing or relevant work experience

Machine Operators Needed If you're dependable and ready to work, apply today and start this week! Responsibilities Operate machines safely and efficiently Inspect products for quality Keep accurate production records Maintain a clean work area Requirements Reliable and willing to learn Able to stand for long periods and lift up to 50+ lbs Hours: Multiple shifts available - must be able to work mandatory OT Pay: $17-18+

Benefits: 401(k) 401(k) matching Bonus based on performance Dental insurance Flexible schedule Free food & snacks Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Job SummaryWe are seeking an entry level employee to join our media and public relations team. In this position, you will support our crew in all aspects of production, from assisting with equipment setup to creating content for journalism. In this position you will control the narrative that people see of our clients. This is done by monitoring, controlling, and directing other media sources. PR and Media also focuses on creating and publishing media for our clients for internal and external use. This is an ideal opportunity for someone who would like to get their foot in the door in the media and PR industry. If you are reliable, hard-working, and energetic, we want to hear from you! Responsibilities Write and create scripts and storyboards for media use Prepare client information to be released to the public Write articles for publication Create and execute strategic plans based off SWOT Analysis Prepare Keynote speeches Prepare, manage and participate in podcast production environment Assist crew members and complete other technical errands as necessary Edit video using Adobe Premier, Premier Rush, and Media Encoder, Adobe Express Build positive relationships with local media and public entities Answer client inquiries via phone and email and perform other administrative tasks Communicate with departments to maintain the narrative of the client Communicate and perform in various hybrid working environments, including promotional events. Generating physical or electronic reports daily or weekly to submit to management. Using training and other resources to turn potential clients into customers. Collaborating ro refine and personalize marketing, promotional, sales, and other pitches. Attending conferences or trade shows to access development for growth as a marketing professional Updating client information in various information databases or documents. Forecasting, handling and delivering funds raised in cash or money order form. Attending developmental or strategic meetings daily or weekly. Continuing to learn and grow by attending optional teaching and training seminars at the Company's cost. Coordinating with your team and your manager on daily/weekly/monthly/yearly goals Managing a team of people. Minimum Qualifications: Excellent Communication Skills Willingness to Learn Strong Work Ethic Commitment to Personal Success Self-Motivation High Energy/Enthusiasm Solution-Focused Career/Growth Oriented Preferred Qualifications Bachelor's in Marketing, Mass Communication, Public Relations, or Journalism Previous experience in public relations, journalism, advertising, mass communication Understanding of PR and Media techniques, concepts, and terminology Proficient in creative and technical writing skills Knowledge of cameras, photography, and videography Understanding of local media strategies Experience using publishing software Experience Leading Small Teams and Groups Experience Working Independently Excellent Time Management/Organization High-Volume F2F Communication Experience Compensation: $30,000.00 - $36,000.00 per year CMTD Solutions is a full-service marketing company that specializes in using a broad diversity of marketing strategies like web design, advertising, social media marketing, promotional events and business-to-business communication to design and implement full-scale marketing campaigns for non-profits."

TempToFT Schedule: 12-hour shifts, rotating days/nights (24/7 operation) tarting Pay: Competitive + $0.50/hr raise upon permanent hire We are hiring Industrial Printing Machine Operators to join our fast-paced production team! Whether you're experienced with high-speed Folder Gluers, Nesters, or Die Cutters, or are someone eager to grow into these technical roles - this is your chance to work in a clean, organized, and safety-focused environment with full company-paid healthcare and a profit-sharing program that rewards your hard work. This is more than a job - it's a long-term career opportunity for motivated individuals ready to make an impact. What You'll Do As an Industrial Printing Machine Operator, you may specialize in one or more of the following machines depending on your background and training: Signature Folder Gluer Operator Set up, operate, and monitor high-speed folding/gluing machines Ensure proper alignment, fold quality, and glue application Perform visual inspections and adjust machine settings as needed Nester Operator Operate nesting equipment in alignment with production schedules Troubleshoot mechanical issues and assist in component builds Support machine setups and transitions while learning full operations Die Cutter Operator Operate precision die-cutting equipment to meet quality standards Use tools like calipers and micrometers to inspect product dimensions Set up machines based on job specs and assist in changeovers What We're Looking For Mechanical aptitude and problem-solving mindset Comfortable using measuring tools and visual inspection Ability to stand for up to 11.5 hours and lift up to 30 lbs Strong communication and team collaboration skills Open to learning, cross-training, and career advancement Willing to work a rotating 12-hour shift schedule including nights/weekends Experience is a plus, but we will train the right candidates! Perks & Benefits $0.50/hr raise after successful invitation to join the permanent team 100% company-paid health benefits Profit-sharing program based on team production and success PPE provided, training included Climate-controlled facility focused on cleanliness and safety Advancement opportunities into leadership and technical roles Job Type: Full-time Benefits: Dental insurance Health insurance Life insurance Paid time off Profit sharing Vision insurance Schedule: 10 hour shift 8 hour shift Day shift Evening shift Monday to Friday Morning shift Night shift Overtime Weekends as needed Ability to Commute: Oklahoma City, OK 73131 (Required) Work Location: In person Ready to Launch Your Career with Us? If you take pride in hands-on work, have a passion for production, and want to grow with a company that rewards your effort - we want to hear from you! Apply today and step into a future full of opportunity, stability, and recognition.

Rod Guide Machine Operator needed. Knowledge in operating a rod guide machine. Also helping with other job duties in rod guide shop such as trimming, palletizing, strapping, etc.

We are looking for a Machine Operator to join our team! To Apply: Click on the “apply” button to get started or apply in-person (7100 S Sunnyvale Rd, Oklahoma City, OK 73135)! What We Offer: Work in a team-oriented environment where collaboration is a priority. Achieve your professional goals without sacrificing the balance between work and life. A comprehensive benefits package with options to choose what works best for you and your family. About the Role: As a Machine Operator with Best Block, you are responsible for: Safe Operation and Maintenance of a Sophisticated, Computerized, Manufacturing Machine Reporting All Needed Information to the Plant Manager Using Equipment and Tools to Manufacturing Specifications Taking Variety of Measurements to Monitor Process and Ensure Quality Production Machine Maintenance and Set-Up Cleaning the Machinery Operating a Forklift We Require: A Minimum of 1 Year of Manufacturing Experience. You Must Have Strong Mechanical Aptitude and Trouble-shooting Skills. A Working Knowledge of Electrical, Hydraulic, Power, Transmission, Pneumatic, and Control Systems. *Your offer may be contingent upon passing a drug test and physical exam for this role.* We are looking for a Machine Operator to join our team! To Apply: Click on the “apply” button to get started or apply in-person (7100 S Sunnyvale Rd, Oklahoma City, OK 73135)! What We Offer: Work in a team-oriented environment where collaboration is a priority. Achieve your professional goals without sacrificing the balance between work and life. A comprehensive benefits package with options to choose what works best for you and your family. About the Role: As a Machine Operator with Best Block, you are responsible for: Safe Operation and Maintenance of a Sophisticated, Computerized, Manufacturing Machine Reporting All Needed Information to the Plant Manager Using Equipment and Tools to Manufacturing Specifications Taking Variety of Measurements to Monitor Process and Ensure Quality Production Machine Maintenance and Set-Up Cleaning the Machinery Operating a Forklift We Require: A Minimum of 1 Year of Manufacturing Experience. You Must Have Strong Mechanical Aptitude and Trouble-shooting Skills. A Working Knowledge of Electrical, Hydraulic, Power, Transmission, Pneumatic, and Control Systems. *Your offer may be contingent upon passing a drug test and physical exam for this role.*

The Machine Operator will operate, sanitize, and maintain Continuous Cook Ready to Eat (CCRTE) machines and work with team to ensure production needs are met. The production lines have multiple operators, this position will focus on a particular machine/part of the machine but will be expected to rotate/back up other Machine Operators. Hours for this role are Monday - Thursday 2:30pm - 12:30am.Position Responsibilities may include, but not limited to Maintain, control, operate, and sanitize machines and equipment used in the Continuous Cook Ready to Eat (CCRTE) operation Ensure machine settings are calibrated and may train/provide guidance to others on how to properly operate equipment Troubleshoot machine problems, make corrections, and/or coordinate with Manager and Maintenance personnel as needed Work as a team and maintain good communications with other Machine Operators, production line workers, and Quality Assurance Do some sanitation between products and involves tear down, cleaning, and reassembly of machines; knowledge of sanitation techniques and proper chemical handling, and regular interaction with Quality Assurance Help perform Warehouse Runner duties including use of forklift and pallet jack Serve as role model regarding GMPs, food safety, general safety, and wearing PPE Required Skills and Experience Prior manufacturing experience Must have excellent performance and attendance record Must have good food and general safety record Mechanical aptitude/experience is critical Must read/speak English Preferred Skills and Experience Prior machine operation using production processing or packaging experience Scanning and AX/inventory experience Experience using forklifts and pallet jacks Bilingual in Spanish Physical Requirements Regularly required to use hands to feel, grab, or operate objects, tools, and controls while reaching with hands and arms Frequently required to stand, communicate, and listen Occasionally required to walk, stoop, kneel or crouch Occasionally lift and/or move up to 50 pounds Visual perception to perform job including peripheral vision, depth perception, and the ability to adjust focus Able to perform repetitive movements Able to work in variable temperatures (cold/hot) Company Overview Mom's Meals is a home-delivered meal service providing fully prepared, refrigerated meal solutions direct to homes nationwide for over 25 years. We provide seniors, patients recovering post-discharge and those managing a chronic condition with tailored nutrition solutions to manage their specific needs. If you are passionate about the well-being of others and have a strong sense of community, Mom's Meals could be the place for you! We are a family operated business looking for fun, compassionate, and friendly people who want to make a difference in the lives of others. EEO Mom's Meals complies with all applicable federal and state non-discrimination laws. All qualified applicants shall receive consideration for employment without regards to race, religion, national origin, ancestry, color, gender, age, disability, sexual orientation or military status.

The Saw Operator is responsible for operating air and hydraulic table saws to cut extruded metal to the required lengths according to work tickets. This position requires attention to detail, quality inspection, and the ability to maintain pace with the extrusion press while ensuring proper material handling. Responsibilities * Operate saws (Oliver, chop, and table saws) safely and efficiently to keep pace with the extrusion press. * Cut material accurately to specified lengths according to work ticket requirements. * Inspect extruded metal for flaws and cut out defective sections * Record the number of pieces cut on saw tickets and maintain separate records for reference * Stack material on aging carts with minimal damage to finished product * Check metal for proper length, hole spacing, carpet barbs, and hammering patterns to ensure quality specifications are met * Assist with loading dummy blocks in the extrusion press as needed * Process scrap material for recycling and load onto scrap trailer * Maintain a clean, neat, and orderly work area * Perform other duties of equal or lesser complexity as assigned * Interact professionally with all employees Minimum Qualifications * Ability to operate air and hydraulic table saws to cut extruded metal according to specifications * Ability to read and interpret work tickets and shop papers * Proficiency in using tape measures and checking measurements * Basic writing and math skills for completing daily production records * Basic verbal communication skills for understanding work assignments and reporting issues * Good motor skills and hand-eye coordination for efficient and safe operation * Ability to stand for 10-12 hours per shift * Ability to lift between 50 and 100 pounds * High school diploma or GED preferred * Previous experience in manufacturing or metal fabrication is helpful but not required. * On-the-job training will be provided Equipment Used * Safety equipment: safety glasses, safety shoes, ear plugs, face shield, gloves, and hearing protection * Machinery: Oliver saw, chop saw, and air stop * Other equipment: electrically controlled tables, aging racks, roll-around carts, hand tools Work Environment * 2nd shift hours: 4:00 PM - 2:30 AM Monday- Thursday * Located in the immediate saw area of the metal processing department * High noise levels require hearing protection * Verbal communication may be difficult due to noise levels * Non-air-conditioned environment * Concrete flooring with no floor covering What We Offer: * Stable work schedule * Team-oriented environment * Opportunity for growth * Training provided Benefits: M-D Building Products, Inc offers a benefits package that includes Medical, Dental, Vision, On-Site Clinic, Voluntary Life Insurance, Lab Card Program, Group Term Life & AD&D, Flexible Spending Accounts, Dependent Care Flexible Spending Account, Short-Term and Long-Term Disability, 401(K) with Company Match, Paid Time Off, Tuition Reimbursement, Education & Development, Mental Wellness (Employee Assistance Program), and Voluntary Benefits including Accident, Critical Illness and Hospital Indemnity Insurance. M-D Building Products, Inc. provides equal employment opportunities for all current employees and applicants. This policy means that no one will be discriminated against because of race, religion, creed, color, national origin, nationality, citizenship, ancestry, sex, age, marital status, physical or mental disability, affectional or sexual orientation, gender identity, military or veteran status, genetic predisposing characteristics or any other basis prohibited by law. Location: Oklahoma City, OK Please submit a complete application detailing any relevant experience. If you're new to warehouse work, highlight any transferable skills and your willingness to learn. We value attention to detail in the application process as it reflects the precision required in this role. Physical demands include continuous standing and walking, intermittent bending, twisting, reaching, lifting, and carrying, with occasional climbing, crouching, and lowering activities.

Kelly Services is looking to hire several Site Logistics Operators/Material Handlers in Knoxville, TN for an industry leading chemical company. For this opportunity, you could be placed as a Chemical Finished Product Operator or a Polymers Packaging/Warehousing/Shipping Operator on a long-term, indefinite assignment. You will be working with chemicals and should be comfortable doing such - either with previous experience or the willingness to learn. Job Description Pay Rate: $14.50/hr Years of experience (minimum/maximum): 6 Months Assembler/Production Experience Required education: High School Diploma/GED Top 3 Must-Haves: High School Diploma/GED or local equivalent 6 months of manufacturing experience, preferably assembly or machine operation Hours: 1st shift - 5:00am-1:30pm Qualifications Pay Rate: $14.50/hr Years of experience (minimum/maximum): 6 Months Assembler/Production Experience Required education: High School Diploma/GED Top 3 Must-Haves: High School Diploma/GED or local equivalent 6 months of manufacturing experience, preferably assembly or machine operation Hours: 1st shift - 5:00am-1:30pm Additional Information All your information will be kept confidential according to EEO guidelines.

Description Machine Operator I - Fabrication Reports to: Manager/Supervisor, Manufacturing Operations Business Divisions: Nortek Air Solutions Time Type: Full Time Classification: Hourly Specific Location: Okarche, OK Business Unit: NAS Manufacturing Operations About Nortek Air Solutions Nortek Air Management is comprised of two individual businesses, Nortek Air Solutions and Nortek Global HVAC with annual sales of close to $1 billion across three market segments: Residential, Light Commercial and Custom Air Solutions. Our Company's mission is Creating a Better Tomorrow Every Day. By living our core values of Safety, Integrity, Performance Driven Culture and Teamwork, we are a premier HVAC Company offering energy efficient and sustainable products and solutions that exceed customer expectations through employee's commitment to quality, customer service and operational excellence. Under the direction of the Manager and/or Supervisor of Manufacturing Operations, operates any of the following equipment: fin press, expander press, and hairpin tubing press or to perform leak test, rework, or a variety of assembly operations. Sets up and operates automatic or semiautomatic machines and related equipment in a continuous production/processing operation. Monitors meters, gauges, valves, flow ratios, temperatures, pressures, and related controls and guidelines to ensure adherence to production/process specifications. Reports any malfunctions or abnormalities and makes minor adjustments and repairs to equipment. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts which requires the use of protective gear to ensure safety. Position Key Attributes: Ability to personally live safe and hold themselves and other team members accountable by having their back in support of our Safety core value. Has integrity, works transparently and recognized for treating others with respect. Takes accountability to create and execute solutions that deliver desired results, and can “own it” in a Performance Driven Culture. Ability to work collaboratively in a Teamwork culture. Ability to support change as a catalyst for improvement. Can thrive in a “legacy now” culture in which we strive to do the right thing for the company today, even if it is the hard thing, and leave behind a stronger company for the next generation of employees. Why is this a great opportunity? Our success depends on YOU! As a member of the Nortek Air Solutions team: You are the lever to drive profitable growth and meaningful change. You are closest to customers/markets and understand our business. We move quickly. You can make the right decisions daily. You are where success begins and ends. Each of you can help make us better every day. Position Responsibilities: Read and follow written instructions and basic mechanical drawing specifications for equipment operations and changeover requirements. Performs work by hand and with fixtures and machines, such as drilling, screwing, and bolting necessary to assembly work, disassembles as required. May perform operations such as sizing copper tubing to coil fin. Monitor meters, gauges, valves, viscosity, temperatures, pressures, related controls and guidelines to ensure adherence to production/process specification. Perform machine and quality checks as outlined in the work standards. Immediately report any out of specification product to the Team Leader or Operations Manager. Account for machine scrap. Complete all required scrap tags and labels for scrap tracking. Process scrap as directed by the Team Leader or Operations Manager. Report and assist maintenance crew in the repair, adjustments, and preventative maintenance. Complete any required reports as directed by the Team Leader or Operations Manager. Comply with all activities related to product safety, legality, regulatory compliance and quality. Maintain a clean working environment and follow all safety guidelines and policies always. Report any unsafe conditions to the Team Leader or Operations Manager. Maintain good communication with team members. Verify use of correct materials by inspection and parts lists; identify and correct process and material defects. Perform basic math calculations to maintain accurate counts of parts produced, adequate parts supply. Performs all work in accordance with established safety procedures. Perform other duties as requested by the Team Leader or Operations Manager. Position Qualifications Requirements: High school diploma or equivalent, preferred. Completion of some secondary/trade school technical and/or general business course is preferred. Ability to follow written directions for proper changeover procedures. Understand and implement proper changeover procedures. General sheet metal knowledge. Some knowledge and experience in Quality Assurance. Attention to detail. Good math skills are preferred to interpret drawings and specifications. Able to lift and/or move heavy objects/components, frequently up to 25lbs. and occasionally up to 50 lbs. Ability to work in repetitive motions and pressure involving fingers, hands, and wrists. Able to stand for prolonged periods on a concrete floor. Able to walk, reach with hands and arms, push, pull, stoop, bend, kneel, crouch, and crawl. Must have demonstrated ability to communicate (speak, read, write) in English. Able to work independently and with others. Wear safety gear at all times. Must be able to work overtime. Preferred: Forklift operations Nortek Air Management and its divisions offer a comprehensive compensation and benefits package. To learn more about Nortek Air Solutions, please visit our company website at **************************

Job DescriptionSalary: $18.00 Machine Operators Needed If youre dependable and ready to work, apply today and start this week! Responsibilities Operate machines safely and efficiently Inspect products for quality Keep accurate production records Maintain a clean work area Requirements Reliable and willing to learn Able to stand for long periods and lift up to 50+ lbs Hours: Multiple shifts available - must be able to work mandatory OT Pay: $17-18+