Machine operator jobs in Woodland, CA

The California Independent System Operator (ISO) manages the flow of electricity across the high-voltage, long-distance power lines that make up 80 percent of California's power grid. We safeguard the economy and well-being of 30 million Californians by operating the grid reliably 24/7. As the impartial grid operator, the California ISO opens access to the wholesale power market that is designed to diversify resources and lower prices. It also grants equal access to 25,865 circuit-miles of power lines and reduces barriers to diverse resources competing to bring power to customers. The California ISO's function is often compared to that of air traffic controllers. It would be grossly unfair for air traffic controllers to represent one airline and profit from allowing that company's planes to go through before others. In the same way, the California ISO operates independently-managing the electron traffic on a power grid we do not own-making sure electricity is safely delivered to utilities and consumers on time and reliably. Relocation assistance is available. Job Description Under the close supervision of the Manager, the Operations Trainee participates in a structured training program encompassing Bulk Electric System (BES) Operations and Market Operations in Electric Power Systems and Generation resource fundamentals, including renewable and intermittent resource effects on operations. This is a full-time training program of both classroom and hands-on instructional training that typically takes six to twelve months to complete. Upon successful completion and graduation from the program requirements, including acquired functional and behavioral competencies, the trainee is eligible to apply for a Control Room Operator or Reliability and Market Operations Engineer position based on the needs of the ISO and meeting the minimum qualifications of the position. PRINCIPAL DUTIES AND RESPONSIBILITIES: Actively participates in a fast-paced learning program of formal classroom instruction, power system simulation, on-the-job training, site-visits, and self-study, including review of Basic Electricity, Substation Operations, Power Plant Operations, Interconnected Power System Operations and ISO Market Operations. Completes training modules and additional required reading including books, training manuals and operating procedures within specified timeframes. Demonstrates knowledge and proficiency in each area of study by qualifying scores on written and/or performance exams. Accountable for maintaining progress through the Program on a defined schedule and periodic proficiency testing. Attends supplemental programs and/or events as deemed appropriate by management. Learns strategies to best support reliability and business objectives. Learns fundamentals of generation and transmission maintenance, transmission system congestion and congestion mitigation. Demonstrates knowledge of operational goals, objectives, tools, EMS applications processes, and services. Actively participates in multiple challenging, complex and time sensitive projects and/or a work programs. Reviews, analyzes and learns appropriate responses to system conditions required to maintain the reliability and economic efficiency of the BES at the Control Center level. Successfully obtains the required NERC Reliability Coordinator Operator Certification prior to completion of the training program.. Program Curriculum and Areas of Study: Fundamentals of Interconnected System Operations and Real-Time Operations of the California ISO Balancing Authority and Transmission Operations Areas. Subjects of study include, but are not limited to: the Federal Energy Regulatory Commission (FERC) approved ISO Tariff, Integrated Forward Market (IFM) Operations, Real-Time Market Operations, Business Practice Manuals, Operating Procedures, Participating Transmission Owner (PTO) Operating Procedures, North American Electric Reliability Corporation (NERC) and Western Electricity Coordination Council (WECC) Mandatory Reliability Standards. Curriculum includes investigating, analyzing and solving a variety of operational issues on the Bulk Electric System (BES) through the use of Energy Management System (EMS) analysis applications such as the state estimator, dispatcher load flow, and contingency analysis. Use of Voltage Security Analysis (VSA) and other advanced applications will be introduced. Substantial on-the-job training under the guidance of System Operations personnel in preparation for specific job functions in a variety of Control Room Operations positions. Qualifications Level of Education and Discipline: A Bachelor's degree in Electrical Engineering, Economics, Mathematics, or Computer Science or equivalent advanced technical military training combined with subsequent military service in related disciplines (e.g., Navy Nuclear Power Training Unit (NPTU) combined with subsequent military service). Amount of Experience: No direct control room operations or power systems experience required. One or more years of related technical experience is desirable. Certifications: None. Must obtain required NERC Reliability Coordinator Operator Certification prior to completion of training program. Type of Experience: Recent Operations experience with California or other WECC Balancing Area, Transmission Operator (TOP), Generator Operator (GOP) or regional group that has real-time transmission operations responsibilities is helpful. Independent Power Producer, military or electronics experience preferred. Knowledge of interconnected electric system operations, various transmission engineering standards, generation, substation operations, energy distribution, Energy Management Systems (EMS) and/or Supervisory Control and Data Acquisition (SCADA) is strongly desired. Additional Skills and Abilities: Demonstrated aptitude in the areas of advanced mathematics, technical, mechanical, and systems/computer applications areas required. Demonstrated high technical interest in bulk electric system operations, market operations, and initiatives pursuant to ongoing professional development. Proven fundamental good judgment with the ability to work effectively in a team environment as facilitator and team member. Must be able to work under high-pressure and stressful conditions and demonstrate the ability to exercise good judgment and discretion in routine and emergency conditions to take immediate appropriate action. Must be confident and decisive with complex decisions with a high level of personal accountability and the ability to be assertive when necessary. Strong sense of self-motivation and to learn complex information in a fast-moving, distracting and ever-changing environment. Excellent communication, analytical, multitasking skills, and flexibility. Additional Information The pay rate for the Operations Trainee is $45.91 per hour. If you already have your NERC RC Certification, your hourly rate would be $48.21 per hour.

Who is Elve? Elve, Inc is a deep-tech startup in Davis, CA whose patented technology enables 100x faster wireless internet access in urban settings and remote locations. Elve delivers a transformative approach to the design and manufacturing of high-efficiency lightweight millimeter-wave and near-THz RF power amplifiers in large quantities. Our solutions enable the next generation of wireless connectivity well beyond 5G as well as high-resolution imaging and radar. We are looking for Production Operators to play a role in bringing our technology to market. If you are passionate about the future of RF electronics, additive manufacturing, precision assembly, microfabrication, vacuum systems, advanced materials processing, and working within a small and energetic team - we can't wait to meet you! Job Description Production Operators at Elve are responsible for manufacturing and assembly of components for Vacuum Electronics Devices. This may include but is not limited to receiving and inspecting, inventory control and forecasting, performing various forms of cleaning, assembling, brazing, and testing parts, sub-assemblies, and/or the finished product. Operators may also be asked to work on process development or improvement projects. Given the size of our team, and the growth we are experiencing, there are lots of opportunities to be challenged and to develop by taking on new opportunities, skills and responsibilities. We are growing and hiring many Production Operators. Feel free to apply anytime. Work Environment May be a combination of the following but not limited to: Manufacturing Environment ISO 5 - ISO 8 Cleanroom Laboratory Machine shop Warehouse Office Requirements Ability to develop, understand and/or follow procedures Detail oriented and organized Responsible Great communication Experience working with small parts / small things Willing to learn and be adaptable/flexible Experience working in a team environment Be able to multitask Self-motivated Within a commutable distance of Davis, CA To conform to U.S. Government technology export regulations, including Export Administration Regulations (EAR), to work in this role you must be one of the following: a U.S. citizen, a lawful permanent resident of the U.S., a protected individual as defined by 8 U.S.C. 1324b(a)(3),, or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about export control here. Benefits Benefits Include: Salary starts at $25/hour, and increases to $28.85/hour after a 3 month probationary period is completed. Elve offers regular salary increases, plus ample advancement opportunities to Production Operator II, III, IV, and V, which carry salaries up to $47/hour. Health benefits (medical, dental, vision) Vacation A taste of the start-up life Exposure to cutting-edge technology in vacuum electronics, materials science, and additive manufacturing Engagement with experts and PhD level engineers What it's like to work at Elve We are an expanding team, on a mission to bring the next generation of high-speed wireless connectivity to a billion people worldwide. That kind of impact is not going to be achieved with incremental improvements- we are gunning for orders of magnitude advances in production capability, cost, size, and power in the mm-wave RF amplifier market. We work really hard, make sure we get good sleep, we handle conflict intentionally, and we expect great things from each other.

**_About_** **_this_** **_position_** At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil , 'all , Loctite , Snuggle , and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow. This position is with our Adhesive Technologies business unit - where we empower our people to transform industries and provide our customers with a competitive advantage through adhesives, sealants and functional coatings. Dare to learn new skills, advance in your career and make an impact at Henkel. **PROGRAM OVERVIEW** Our 18-month CHAiNGERS Operations & Supply Chain Trainee Program prepares you for a fast-track development in the Operations & Supply Chain organization at Henkel Adhesives Technologies. As a CHAiNGER, you will receive a permanent employment contract from day one, enjoy high visibility and benefit from global career opportunities. Throughout this time, you will gain a comprehensive insight into the different functions of Operations & Supply Chain, take over projects in our plants, build a broad network, benefit from an individual training and development plan that will prepare you for future management positions. **What you´ll do** + Full engagement with the 18-month trainee program, acquiring a broad overview of the role and tasks of operations and supply chain management at Henkel Adhesive Technologies. + Support daily activities at your designated plant, resulting in an overall understanding and appreciation for the full AO value chain - this includes introduction to different supply chain-related functions like strategy, digital business, procurement, and sales to build a broad understanding of the organization. + Own and drive multiple cross-functional projects that lend to continuous improvement within your plant, allowing you to develop deep insight into the different functions of operations and supply chain. + Engage in training and networking experiences to drive preparation for taking on potential leadership roles within our organization in the future. **During the program you will benefit from:** + Individual trainings, development plans, a high level of visibility, mentor's guidance, network with senior leaders and other trainees globally. + Permanent contract, a competitive salary, and a guaranteed position after the program contingent on satisfying performance. + Upon completion of the program, you will be placed in a position across the operations and supply chain organization at one of our regional locations where the knowledge and expertise learned through the program will provide you with a wide range of career opportunities. **What makes you a good fit** + Bachelor's or Master's degree in Engineering (Chemical, Industrial, Mechanical, Computer), Materials Science, Business Administration or Economics with successful academic record (3.0 or above is preferred). + Up to 2 years of work experience, ideally within a manufacturing environment + Strong verbal and written communication skills, able to engage effectively with all levels of management. + Proficient in active listening and asking insightful questions to gain deeper understanding. + Skilled in delivering presentations and tailoring messages to meet the needs of diverse audiences. + Effective time management and organizational skills, ensuring timely and efficient task completion. Problem solving and analytical thinking skills required, with ability to consistently look at complex issues from many angles, skillfully separating root causes from symptoms. + Aptitude for continuous learning and self-development, with interest in new technologies, digitization and data analysis. + Demonstrated leadership ability and collaboration within teams (previous internship/co-op experience is preferred). + Willingness and drive to become a future leader + Available for full-time employment in July 2026. + Geographic mobility **Some benefits of joining Henkel** + **Health Insurance:** affordable plans for medical, dental, vision and wellbeing starting on day 1 + **Work-Life Balance:** Paid time off including sick, vacation, holiday and volunteer time, flexible & hybrid work policies (depending on role), and vacation buy / sell program + **Financial:** 401k matching, employee share plan with voluntary investment and Henkel matching shares, annual performance bonus, service awards and student loan reimbursement + **Family Support:** 12-week gender neutral parental leave (up to 20 weeks for parents giving birth), fertility support, adoption & surrogacy reimbursement, discounted child and elderly care, and scholarships + **Career Growth:** diverse national and international growth opportunities, access to thousands of skills development courses, and tuition reimbursement The salary for this role is **$70,000.00 - $80,000.00** . This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future. Henkel does not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered Henkel property and therefore, Henkel will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. **JOB ID:** 25086630 **Job Locations:** United States, CA, Bay Point, CA | United States, CA, Rancho Dominguez, CA | United States, IL, Elgin, IL | United States, NC, Salisbury, NC | United States, OH, Cleveland, OH | United States, OH, Mentor, OH | United States, SC, Greenville, SC | United States, TN, Memphis, TN **Contact information for application-related questions:** ***************************** Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. **Application Deadline:** As long as the vacancy is listed on our Career Site, we are happy to receive your application **Job-Center:** If you have an application already, you can create or log in to your accounthere (******************************************************************************************************************************************************** to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. **Accept for all YouTube content** Deactivate loading external content from YouTube. How is work at Henkel

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 12/31/2025. Posting Job Summary (Purpose): The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders). Key Characteristics: * Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policies * Demonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvement * Ability to function effectively as a member of a production team Duties and Responsibilities: * Sort, inspect, clean, paint, label, and refill empty cylinders. * Maintain a safety focus at all times and wear the proper PPE * Ensure the consistent quality of cylinders are being processed * Load filled cylinders onto the truck(s) for the next day's shipments. * Ability to stand and walk 8 - 12 hours per day. * Ability to lift 50 pounds repeatedly throughout the day. * Perform general housekeeping duties. Knowledge, Skills and Abilities: * Ability to follow processes, procedures, and instructions * Ability to function effectively as a member of a production team * Willingness to grow and learn * Basic mechanical aptitude * Basic computer knowledge * Work in a fast-paced environment * Be able to stand 8-10 hours per day * Ability to obtain required state licensing * Ability to be forklift certified Education and Experience Required: * 1 - 2 years work experience in manufacturing is preferred * High School Diploma or GED Working conditions: * Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $17.00 to18.00per hour, depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. The Machine Operator position is located in Dixon, IL will be responsible for producing pleated media within specifications and supply that media to assemble into filters. Hours are Sunday thru Wednesday 8:00 pm - 6:00 am. Role Responsibilities: * Recognize and understand the operations and machines involved with the media pleating process * Recognize and understand the functions and capabilities of the pleating fixtures * Pleat media within acceptable quality and quantity standards as stated in the prints and/or route sheets * Communicate effectively with material handlers to ensure the correct media is supplied to the line promptly * Perform quality checks and tests as assigned * Follow the first piece and set-up sheets * Complete all applicable paperwork (scrap report, media usage sheet, media testing sheet, oil runs, etc. * Monitor production online by noting variation of production rates between pleater and potting and notifying the Team Leader when variation causes the pleater rate to decrease * Perform preventative maintenance on all assigned equipment * Comply with all DOT, HAZMAT and environmental policies and procedures. Using all designated Personal Protective Equipment as required * While this list is representative of essential job duties, it is not an all-inclusive list of duties required to perform this role. Other duties may be assigned in order to fulfill Donaldson's mission, vision and strategic plan objectives. Minimum Qualifications: * High School Diploma or GED * Ability to communicate and interact constructively and effectively with all plant employees * Ability to read blueprints * Ability to operate computer systems * Ability to utilize gauges, calipers, indicators, scales, and tape measures. * Exhibit mechanical aptitude * Adhere to safety procedures * Perform a variety of tasks throughout the day in a fast-paced work environment Preferred Qualifications: * Manufacturing experience * Previous pleating machine operating experience * Previous setup experience Hourly Rate: $20.69 Actual salaries may vary based on several factors, including but not limited to applicable work experience, training, education, and performance. This position is eligible for an annual incentive plan based on performance and company growth Employee benefits are part of the competitive total rewards package that Donaldson Company, Inc. provides to you. Our comprehensive benefits program includes health benefits, retirement plan (401k), paid time away, paid leaves (including paid paternal leave), tuition reimbursement and more. Immigration Sponsorship Not Available: Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.) Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. International relocation or remote work arrangements outside of the United States will not be considered. Keywords: Pleating, Quality, Manufacturing, Communication, Blueprints Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

About the Company: Nivagen is a global company dedicated to enhancing lives by developing and providing cost-effective generic prescription drugs and over-the-counter products for the North American market. For over a decade, we've remained steadfast in our commitment to core values of excellence, integrity, and respect for people. Our team of professionals collaborates tirelessly to pioneer advancements in manufacturing, distribution, and quality control, ensuring a holistic approach to healthcare. Through vertical integration of the pharmaceutical supply chain, cutting-edge technology, and unwavering dedication to excellence, we continually strive to redefine medication accessibility and affordability. We prioritize our employees' well-being by offering competitive pay, comprehensive benefits, and robust training and development opportunities. By investing in our workforce and fostering a culture of growth and support, we empower our team to drive innovation and make a positive impact in the healthcare industry. At Nivagen, our mission is clear: to make a meaningful difference in people's lives by delivering high-quality, affordable medications while upholding the highest standards of integrity and excellence. Job Location: Nivagen Pharmaceuticals Inc., Sacramento, CA 3900 Duckhorn Dr, Sacramento, CA 95834. About the Job: Title of the Position: Visual Inspection and Packing Operator At Nivagen, the Visual Inspection and Packaging Operator plays a critical role in ensuring product quality and compliance. This position is responsible for conducting manual visual inspections to verify that products meet established quality standards. Additionally, the operator will oversee the operation of leak testing machines and packaging equipment to ensure products are properly prepared for shipment. All tasks must be performed in strict adherence to company protocols and regulatory requirements, maintaining the highest standards of product quality and safety throughout the production process. Responsibilities: To perform the visual inspection of the filled containers i.e., vials (liquid and lyophilized), pre-filled syringes, cartridges and IV bags. To identify the defects i.e., fill volume inconsistencies, glass pieces, metal, colored particles, fibers, cap defects, sealing defects, label flaws, printed text matter flaws, batch coding flaws, wrong labelling, cross labelling flaws etc. and shall ensure no defective product shall be supplied to the market. Segregation of the defects and preparation of defective library and preparation of Knapp kits required for the qualification of automatic inspection machines. Preparation of the documents (including SOPs, batch records), protocols required for operation and maintenance of the VI, leak testing and packing equipment. Responsible for collection, transportation, and storage of the semi-finished products as per product storage conditions. Shall take utmost care to avoid the cross-contamination and mix-up errors. Shall be responsible for the storage of the semi-finished and finished products Collaborate effectively with cross-functional departments to ensure timely coordination and organization of all prerequisites, supporting the smooth operation of the department and ensuring the delivery of finished products that meet market needs and business demands. Qualification/validation of the equipment and area in accordance with approved protocols and preparation and readiness for the routine commercial manufacturing. To perform in process, check and controls in accordance with approved protocols, batch records, SOPs and regulatory guidelines. Collaborate closely with production staff, including operators, supervisors, and quality control teams, to ensure product quality and timely delivery, while actively participating in team meetings and training sessions as required. Prepare products for secondary packing using the correct materials and pack them according to company specifications. Ensure packaging is sealed, labelled correctly, and checked for completeness and accuracy. Collaboration with warehouse, production, in-process quality teams for timely support and product deliverables to meet OTIF. Adhere to safety guidelines, promptly report hazards or accidents, and ensure the work area remains clean and organized. Involved in daily operations, including cleaning, maintaining logs, and overseeing routine packing activities to ensure efficiency and compliance Tracking defect trends, maintaining control over defect storage, conducting periodic reviews, and implementing control and mitigation plans Managing market complaints, conducting investigations, implementing corrective actions, and preventing future occurrences. Inventory management for the consumables required for the day-to-day packing activities. Any other tasks as directed by the supervisor. Education: High school diploma or equivalent required; technical certification or degree in a related field is a plus. Experience: 1-3 years of experience in pharmaceutical manufacturing, visual inspection, or packaging Knowledge and Skills: cGMP, FDA regulations, and SOPs related to sterile and non-sterile pharmaceutical production. Strong attention to detail and ability to detect visual defects. Proficiency in operating inspection and packaging equipment. Ability to follow written instructions and complete documentation accurately. Good communication and teamwork skills. Requirements: Legally authorized to be employed in the United States (U.S. citizens or national, permanent residents) Must live or willing to move to Sacramento Metropolitan Region (Approx. 40 miles' radius) Able to successfully complete a drug and background check stand, walk, and perform tasks for extended periods, lift and move products up to 35 kg, and demonstrate good hand-eye coordination and fine motor skills for inspection and packing duties. Must comply with cleanroom protocols, gowning, and PPE requirements. The role requires strong attention to detail, the ability to identify defects or discrepancies, a basic understanding of quality control and packaging requirements, the capacity to work efficiently in a fast-paced environment while maintaining high standards, and good manual dexterity for handling delicate products. Benefits: Pay range $20.0 - $25.0 per hour (Based on Experience) Yearly bonus eligibility Benefits: Nivagen offers a wide variety of benefits and programs to support health and well-being Medical, dental and vision coverage Paid time off plan 401k savings plan Additional Information: Nivagen to afford equal opportunity for employment to all individuals regardless of race, color, age, national origin, physical or mental disability, history of disability, ancestry, citizenship status, political affiliation, religion, gender, transgender, gender identity, marital status, status as a parent, sexual orientation, veteran status, genetic information or other factors prohibited by law, and to prohibit harassment or retaliation based on any of these factors.

Milliken & Company is a global manufacturing leader whose focus on materials science delivers tomorrow's breakthroughs today. From industry-leading molecules to sustainable innovations, Milliken creates products that enhance people's lives and deliver solutions for its customers and communities. Drawing on thousands of patents and a portfolio with applications across the textile, flooring, chemical and healthcare businesses, the company harnesses a shared sense of integrity and excellence to positively impact the world for generations. Discover more about Milliken's curious minds and inspired solutions at Milliken.com and on Facebook, Instagram, LinkedIn and Twitter. Millitron Operator Job Description The Millitron operator is responsible for the production of 1st quality carpet on dye ranges. This must be done safely while minimizing downtime. Overview Associates will be responsible for: Auditing that all quality critical set-points are correct Perform colorways and change-overs according to specifications Running orders according to provided schedule Troubleshooting Millitron quality issues Learning how to perform Millitron DTM / control plan items The associate will be expected to learn and cross train on all Millitrons in the facility Pass written and demonstrated skills test for Millitron Operator Completion of Millitron operator demonstrated skills, beginning with tile print rover. Requirements Must be computer literate and able to learn computer systems quickly Must be able to drive a fork lift Must have good written and verbal communication skills Must abide by job specific safety and maintain SHARP compliance Must attend echo team meetings and safety meetings. Schedule 10 - 12 hour shift schedule and reports to the area supervisor. Milliken is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to actual or perceived race, color, creed, religion, sex or gender (including pregnancy, childbirth or related medical condition, including but not limited to lactation), sexual orientation, gender identity or gender expression (including transgender status), ancestry, national origin, citizenship, age physical or mental disability, genetic information, marital status, veteran or military status or any other characteristic protected by applicable law.

R10078656 Production Operator IV (Open) At Airgas, we are committed to building a diverse and inclusive workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world. We are looking for you! $25.50/hr + $1.00 Shift Differential Shift: 2:00 p.m. - 10:30 p.m. Pay or Performance Bonus The Plant Operator IV will be responsible for safely handling and filling gas products into liquid, medical and high pressure gas cylinders in compliance with federal, state, local regulations, and meeting the standard operating procedures of Airgas Performing various duties in the plant including monitoring equipment to fill industrial gas mixes, cryogenic gases and medical gas products as well as performing Level 1 & 2 duties. Inspects cylinders prior to filling, following standard procedures as required by government, Airgas, and distributor standards. Conducts a variety of Safety checks per procedures, such as odor tests, checking caps and valves. Analyzes products for purity and correct mixtures. Handles high-pressure, medical and liquid cylinders. Prepares high pressure cylinders and cryogenic vessels for filling. Attaches to manifold, evacuates cylinders to eliminate all possible contaminants. Fills cylinders by pressure and weight, per regulations and standards. Assists with the loading & unloading of cylinders on & off pallets and tractor trailers. Operates a forklift, pallet jack and other warehouse equipment. Manages paperwork to DOT, FDA, OSHA, and Airgas standards. Completes quality control sheets as required. Understands hazards of various gases; size and contents of cylinders by reading and interpreting cylinder labels and the color-coding of tanks. Accurately labels cylinders. Complies with all government and company standards relating to the safe handling of hazardous materials/cylinder gases. Maintains a neat, clean and orderly plant appearance. All employees are expected to perform any reasonable work request that falls within the qualifications but not specifically described. ________________________Are you a MATCH? Required Education: HS Diploma or equivalent preferred. Required Length & Type of Experience: Minimum of 1 year of prior experience in filling low pressure gases Minimum of 1 year of related experience Must have completed training and be proficient in filling all cryogenic liquids as well as all pure industrial gases. Forklift Certification FDA and Food Grade Training CGMP Acetylene experience may be required depending on location (3 years preferred for Acetylene). Strong background in gas, welding and safety supply industry or chemical industry preferred Knowledge, Skills & Abilities (KSA's): Strong verbal and written communication skills. Ability to read and comprehend material safety data sheets. Must be able to work with a wide variety of people with different personalities and backgrounds. Excellent customer service skills. Ability to work independently and under some pressure to meet deadlines. Strong level of attention to detail. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentages. Ability to safely operate a forklift. The hourly base pay range for this position in California is $25.50/hr. Please note that the hourly base pay information is a general guideline only. Airgas considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. ________________________ Benefits We care about and support all Airgas associates. This is evident not only through our competitive compensation but also through a comprehensive benefits package that includes medical, dental, and vision plans, vacation, sick time, floating holidays, and paid holidays for full-time employees. We provide a progressive parental leave package for our eligible Airgas parents, offering generous paid time off for the birth or placement of children. Additionally, we offer our employees a 401k plan with company matching funds, tuition reimbursement, discounted college tuition for employees' dependents, and an Airgas Scholarship Program. _________________________ Your DIFFERENCES enhance our PERFORMANCE At Airgas, we are committed to building a workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world. We welcome and consider applications from all qualified applicants, regardless of their race, gender, sexual orientation, religion, disability or any other protected characteristic. We strongly believe a diverse organization opens up opportunities for people to express their talent, both individually and collectively and it helps foster our ability to innovate by living our fundamentals, acting for our success and creating an engaging environment in a changing world. _________________________ About Airgas Airgas, an Air Liquide company, is a leading U.S. supplier of industrial, medical and specialty gases, as well as hardgoods and related products; one of the largest U.S. suppliers of safety products; and a leading U.S. supplier of ammonia products and process chemicals. Through the passion and diversity of its 18,000 associates, Airgas fosters a culture of safety, customer success, sustainability and innovation. Airgas associates are empowered to share ideas, take initiative and make decisions. Airgas is a subsidiary of Air Liquide, a world leader in gases, technologies and services for industry and healthcare. Present in 60 countries with approximately 66,500 employees, Air Liquide serves more than 4 million customers and patients. Join us for a stimulating experience: At Airgas, you matter and so does the work you do. As a member of our team, you play an important role in the success of your team, making sure our products are created sustainably and delivered safely and efficiently. In turn, you'll find a welcoming workplace where you're valued for who you are and where you can fill your potential while growing a fulfilling career - whatever path you choose. _________________________ Equal Employment Opportunity Information We are an equal opportunity employer. We welcome all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic. Airgas, an Air Liquide Company is a Government contractor subject to the Vietnam Era Veterans' Readjustment Assistance Act of 1974 and Section 503 of the Rehabilitation Act of 1973. Airgas does not discriminate against qualified applicants with disabilities, and is committed to providing reasonable accommodations to the known disabilities of such individuals so as to ensure equal access to benefits and privileges of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact us by email at us-accommodationrequest@airgas.com. _________________________ California Privacy Notice

Job DescriptionBenefits: 401(k) Company parties Dental insurance Free food & snacks Opportunity for advancement Paid time off Training & development Position Overview As a Robot Operator at Onsight Technology, you will play a pivotal role in the operation and maintenance of our advanced robotic systems deployed on solar sites. You will work as part of a dynamic team that leverages cutting-edge technology to ensure the efficient operation and optimization of solar energy facilities. Key Responsibilities: Operate and monitor robotic systems remotely to inspect and maintain solar sites. Collaborate with the technical team to troubleshoot and resolve any issues related to robot operation. Ensure that robotic systems are operating within specified parameters and safety standards. Essential to operate robots in a safe manner while on customer sites and at all times. Spending extended periods of time sitting and staring at computer screens. Keep detailed records of robot activities and maintenance procedures. Develop and maintain positive relationships with clients. Assist in the deployment of robotic systems at various solar sites. Qualifications: High school diploma or equivalent (technical education or certification is a plus). Strong technical aptitude and problem-solving skills. Ability to work independently and as part of a team. Excellent communication skills. Attention to detail and a commitment to safety. Knowledge of solar energy systems is a plus. About the Company: Onsight Technology is at the forefront of the energy industry, revolutionizing the way solar sites are managed and optimized. Onsight Technology utilizes the power of AI, computer vision, and robotics to analyze and optimize solar sites. The cutting-edge technology offered by Onsight is specifically designed to provide essential data and insights for large remote sites, without the need for additional labor costs. Onsight's advanced algorithms can identify hundreds of potential problems and predict future ones, enabling proactive maintenance and optimization. With Onsight, solar sites can maximize their efficiency, reduce downtime, and increase overall profitability. To meet the growing demands of the energy industry, Onsight Technology is expanding its workforce.

MACHINE OPERATOR - 2nd or 3rd Shift COMPENSATION: This position pays within a range of $21.50 - $26.45 per hour, as an hourly non-exempt employee, paid weekly. We also offer a wide range of benefits, including Vacation, Sick Pay, Holiday Pay, Health Insurance benefits and 401k. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Performs all duties associated with the operation of the variety of packaging equipment in the section including the independent setup of all packaging equipment as assigned by the supervisor or production schedule. To make independent adjustments and corrections to the piece of equipment to which the operator is assigned, ensuring efficient operation of that particular piece of equipment. Directs the production workers assigned to that particular piece of equipment being utilized, to ensure efficient operation in completing the assigned tasks. Inspects all production to ensure compliance with specifications for that particular package. Completes all paperwork which is required, including start-up checklists, weight log sheets, and warehouse transfers. Perform changeovers on the variety of packaging equipment as directed by the supervisor or production planner. The use and understanding of written production schedules and instruction manuals, in English, may be required. Perform cursory preventative maintenance duties on the piece of equipment to which they are assigned. This may involve the use of written manuals, in English. May be assigned to calculate, compile, and report production volumes as directed by the packaging supervisor. Performs all duties assigned within the packaging section including the packing of cases or caddies, palletizing cases, gathering, mixing, and feeding of product to the packaging equipment, marking cases or cartons, inspection of product, and assembly of cartons or cases. Performs the safe operation of a manual or powered pallet jack, also will be required to operate power lift equipment including specialized (narrow-aisle) equipment including but not limited to Forklifts. Require 6-12 months minimum driving experience. Inherent in each position is a general duty to maintain each respective work area in a safe and sanitary condition. The employee may be required to perform other such duties within the scope of their employment as may be assigned. Regular, predictable, full-time attendance is required as an essential function of this position. Wages, hours, and working conditions are outlined in a Collective Bargaining Agreement between Jelly Belly Candy Company and Bakery, Confectionery, Tobacco Workers & Grainmillers International Union, AFL-CIO, Local #125. Overtime as outlined in the Collective Bargaining Agreement is mandatory. An essential function of this job is a requirement to work all hours scheduled. SUPERVISORY RESPONSIBILITIES No supervisory responsibilities exist in this position. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High School diploma or general education degree (GED); three (3) to five (5) years prior related work experience or nine (9) months structured, on-the-job training. Educational equivalency acceptable. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of employees of organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. REASONING ABILITY Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and walk. The employee frequently is required to use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 35 pounds. The employee must seek assistance on all lifting of over 50 lbs. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The noise level in the work environment is usually moderate. **All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.**

Benefits/Perks: Initial and ongoing training Competitive compensation Paid holidays and vacation Indoor and comfortable working environment A locally owned and nationally recognized Signage, Printing, and Marketing Services company in Sacramento is looking for an experienced Sign Shop Production Operator and Installer. We have a fast-paced and creative work environment that empowers our employees to contribute and work independently with a solid team of experienced professionals. We work with a dynamic and exciting client base who challenge us to produce the best signage to represent their organizations from ground signs to channel lettering and everything in between. With the tools and technologies provided, we focus on putting our energy toward creating a remarkably unparalleled experience for each and every customer. This is where our Production Team comes in! Job Summary: Our Sign Shop Production Operator and Installer work closely with our sales team, providing support with the goal of increasing sales and customer satisfaction. Responsibility Overview: Understanding of signage and graphics media and substrates. Proficient use of sign production and finishing equipment. Prepare substrates for application. This may include cutting, painting, laminating, cleaning, and maintaining the substrates for application. Weed excess vinyl from computer-cut images. Weeding techniques vary with size, type of vinyl, and complexity of the image. Know how and when to use each technique. Perform quality assurance measures pre- and post-construction by accurately reading and interpreting a Work Order and then proofing for errors or unacceptable standards (bubbles, rough edges, loose seams). Perform finishing operations such as laminating, encapsulating, and/or mounting printed pieces. Install signs at customer locations as directed. Operate the laminator while maintaining proper fit and settings. Maintain a sufficient inventory of media, laminates, and substrates. Maintain production rate consistency; meet or exceed established minimum rates per hour. Skills we are looking for: Valid driver's license/clean driving record is a must Must be able to lift 50 lbs., work with power tools, and use a ladder comfortably Presentable, dependable, reliable, and detail-oriented Must be motivated, energetic, and able to problem solve on site Skills desired, but not required: Vehicle wrap installation experience is a plus. Compensation: $20.00 - $25.00 per hour We are one of the nations leading communications businesses backed by 50 years of professional experience and extraordinary growth. While technology plays a pivotal role in our industry, from print, signs and marketing to online ordering portals and more, we believe a rewarding career is shaped by people, purpose and passion. If you dream of being part of an organization with a great heritage, progressive leadership and cutting-edge technology, discover the world that is PIP and its independent franchisees. PIP is a leading industry provider of printing, signs and marketing services, but we're less corporate culture and more close-knit family. We collaborate on ideas and dreams. Push boundaries. Solve challenges. Look out for one another. And yes, we work hard…and play harder. It's part of our DNA. With several career paths to choose from - sales, marketing, design, production, operations - no matter the role you choose, you'll be working in an organization that cares about you. At PIP you can make a difference. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to PIP.

Operator III, Production (Liquid Line) Reporting to: Lead, Production Barry Callebaut is a global organization poised for growth; a company which has embraced the vision to delight its customers, while out-performing its competitors, a business which is committed to sustainability, has innovation in its DNA, is a leader in complex manufacturing and supply chain solutions and is focused on being a best-in-class employer. Barry Callebaut seeks diverse and passionate people who thrive in a dynamic environment, focused on continuous learning, living BC's Values and of course loving chocolate. About the role: Under the direction of the Production Lead, the Production Operator III will be responsible for all phases of transforming raw materials into finished product. Key responsibilities include: The duties and responsibilities described are not a comprehensive list and that additional tasks may be assigned to the employee from time to time; or the scope of the job may change as necessitated by business demands. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. ● Ensure the cleaning and optimum condition of the equipment before and / or during production. Otherwise, notify the Shift Leader. ● Ensure that there are no differences between the material used and that requested to produce. ● Adjust pre-refiner/refiner and conch temperatures and product fineness according to recipe and customer specifications. ● Manually add raw materials like powders, fat, flavors and emulsifiers in different parts of the process according to recipes. ● Adjust products according to meet quality specifications before sending them to finished product tanks. ● Carry out the elaboration of the chocolate according to the process specifications. ● Enter recipe data according to production schedule. ● Record raw material incoming number on production order sheet. ● Review the conching cycles of each product. ● Enters performance confirmations and shift information into SAP. ● Pump product from conches to finished/vertical tanks according to production schedule. ● Take product samples for quality checks. ● Follow priorities set up by the Leader. ● Use of rework melter. ● Notify the leader in charge of any anomaly that is outside the procedure. ● Turn off equipment when they are not in operation. ● Respect the safety rules and take care of yourself and your colleagues respecting and following the safety procedures in force in the company. ● Report unsafe acts and conditions. ● Participate of mandatory trainings. ● Commit to fulfill the expectations of quality and service of the clients, as well as the current regulatory compliance applicable to the food industry. ● Responsible for reporting any situation of potential or real danger to your superior and the Quality department. ● Keep the area, tools and equipment in your care clean and tidy. ● Clean floors and hallways in your area and support other areas when required. ● Support in cleaning nozzle plates, packaging lines, reworking, re-packaging. ● Firmly follow the GMP's. Education: ● High school diploma or equivalency. Work Experience: ● Minimum 3 year of production manufacturing experience. ● Ability to follow written and oral instructions. ● Ability to operate material handling equipment. ● Good organization, math, written and oral communication, detail orientated, interpersonal skills. ● Self-motivated, must work autonomously with a minimum of supervision. ● Must be able to adhere to all GMP and food safety rules. Additional Requirements: ● Experience driving forklift is a plus. ● Detail & results oriented. ● Ability to lift at least 25 Kg (50 Lbs.) ● Available for overtime when required. ● Available to work on the weekends. ● Teamwork: Cooperation, being assisted, participating in group activities. ● Initiative / Proactivity: Do more than expected in its position, carrying ideas for improvement and actively participate in its implementation. ● Customer orientation: Focus our efforts on meeting our clients' needs. ● Respect: Respect our colleagues and the company. What you can expect from Barry Callebaut: ● Competitive compensation (Starting at $27 per hour) package including salary, benefits, and vacation time ● 12 paid holidays PLUS your birthday off! ● Collaborative atmosphere with like-minded individuals who are passionate about chocolate ● The ability to grow your career within an organization that values development and internal career growth We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Part-time Card Production Operator responsible for processing an average of 10,000 Medi-Cal membership cards per day, troubleshooting card production equipment, performing quality checks, and working in a secure, high-volume production environment. This role supports the Claims Department by ensuring accurate and timely fulfillment of initial and replacement Benefit Identification Cards. 11135 Trade Center Drive, Suite 100 Rancho Cordova, CA 95670 100% On-Site WORK SCHEDULE Part-time, Monday-Friday 5:00 AM - 11:30 AM PAY RATE 20.00 per hour WHAT WE OFFER Paid sick leave based on state regulations after 90 days of employment Medical, dental, and vision coverage after a waiting period (60% paid by Fortuna) Free TeleMedicine and Mental Health support for all employees and their families Additional voluntary benefits: Group Life Insurance, Accidental Insurance, Critical Care, Short-Term Disability WHAT YOU'LL DO Process an average of 10,000 membership cards per day in alignment with production expectations. Produce and mail initial and replacement plastic Benefit Identification Cards for enrolled Medi-Cal members. Operate card production equipment, including loading materials, downloading program files, adjusting machine settings, and ensuring proper function. Perform routine equipment maintenance and troubleshoot machine issues to minimize downtime and maintain productivity. Conduct continuous quality control checks to ensure accuracy, compliance with job specifications, and secure handling of all materials. Prepare completed cards for mailing and ensure all outgoing materials meet production and quality standards. Log, track, report, and securely destroy undeliverable cards in accordance with established procedures. Handle confidential data following established security protocols and departmental guidelines. Maintain organized workflows and complete all assignments on schedule with high-quality output. Collaborate with team members while also independently managing workload in a high-volume, secure production environment. WHAT YOU'LL BRING Ability to work in a secure, high-volume production environment. Experience operating automated inserting or card production equipment strongly preferred. Proficiency with PCs and standard applications (Outlook, Word, Excel). Ability to multitask, prioritize, and work independently while contributing effectively to a team. Strong problem-solving skills with the ability to troubleshoot equipment and adjust settings as needed. Strong attention to detail and commitment to ensuring quality and accuracy. Ability to lift up to 50 lbs and stand/walk for the majority of the shift. ABOUT FORTUNA Fortuna operates as a staffing agency that sources, screens, and presents candidates for employment opportunities on behalf of our clients. Founded in 2012 by practicing professionals with more than 50 combined years of experience, Fortuna is headquartered in McClellan, California, with offices in Los Angeles, New York, the Philippines, and Israel. Fortuna participates in multiple California service agreements, including CMAS, ITMSA (Tier 2), and the CalPERS SpringFed Pool, as well as municipal and large corporate vendor pools. Career Site: *****************

Job Description Set up, operate and troubleshoot plastic or metal molding machines to ensure parts meet quality and production targets in a high‑volume environment. Key responsibilities Install molds, set machine parameters, start‑up and shut‑down lines Monitor cycle times, temperatures and pressures; adjust for scrap reduction Perform in‑process inspections (visual, dimensional, SPC) Conduct minor mechanical / hydraulic / pneumatic repairs and preventive maintenance Keep accurate production & downtime logs; escalate major issues to maintenance/engineering Adhere to ISO/TS quality, safety and 5S standards Typical requirements 2 + years on injection, compression or blow‑molding equipment Ability to read blueprints & use basic metrology tools (calipers, micrometers) Working knowledge of scientific molding, RJG or Paulson a plus High‑school diploma or equivalent; technical certificate preferred

Job DescriptionPlease ONLY apply within if you have manufacturing/production or machine operator experience in a warehouse! We are looking for Machine Operators in San Jose for production work making nameplates. The shift runs from 1:30PM-10PM for the Machine Operator role. These are immediate starts based on proven experience in your work history + a general phone interview. **This is a Monday-Friday schedule with 8 hour shifts** Please apply immediately by replying to this email with your resume and availability for phone interview if you meet the following criteria; Job Duties/Requirements: Manage production machines Operate machinery Oversee product quality Ability to lift 50lbs consistently Ability to use a computer Pay close attention to detail with production Eager to learn

Job DescriptionCome build the future with us. Interstate Advanced Materials is seeking a full-time Machine Operator at our Sacramento, CA facility. At Interstate Advanced Materials, we support the professional growth of our employees while providing exceptional service to our customers. We are a wholesale distributor and fabricator of high-performance plastic sheet, rod, tube, and film serving industries such as aerospace, defense, semiconductor, medical, food processing, automotive, agriculture, and more. Headquartered in Sacramento, CA, our family-owned company employs over 170 team members across seven states. As an environmentally sustainable and award-winning organization, we are committed to solving customer challenges through innovation, dedication, and collaboration. If you're passionate about doing your best work at a company that values your contributions, we want to hear from you. Summary: This role requires strong attention to detail, solid communication skills, and a positive, team-oriented mindset. Ideal candidates take pride in producing quality work and are eager to grow with a company that values precision and collaboration. Responsibilities include: Maintain a positive attitude and work well within a team environment Setup and run jobs on CNC equipment, ensuring precision and attention to detail Load and unload materials onto machines & starting programs as needed Allocate materials and change tools as required for each job Perform basic machine maintenance and ensure equipment is clean and operational Follow quality control procedures and accurate setup documentation Provide feedback to help improve program efficiency and material usage Assist with finishing tasks, including deburring and preparing parts for final processing Communicate job details and handoffs with fellow operators and team members Read and interpret blueprints & work instructions accurately Use measuring tools to inspect parts and ensure product accuracy Work as a team with other employees to help the branch reach its goals Other duties as required Requirements: Prior CNC machine experience is a plus, but not required. Experience with hand tools, routers, and general warehouse equipment Ability to read and understand blueprints and technical drawings Confident in using measuring tools such as tape & calipers Good communication skills and a team-player mindset Strong basic math skills (add, subtract, multiply, divide) High attention to detail and commitment to producing quality work Forklift experience Benefits: This full-time position offers a comprehensive benefits package including: Health insurance Paid vacation Sick time Holiday pay Join us and be part of a team that values hard work, innovation, and collaboration. Powered by JazzHR WZYOvzB3Nr

JOB PURPOSE: To ensure high-quality production of blow/injection molding products by safely and efficiently cutting, trimming, and assembling the plastic components to the specified dimensions. ESSENTIAL DUTIES AND RESPONSIBILITIES: Cut and shape plastic materials (deflash) to ensure product specifications are met by using a cutting knife, scraper or other tools. Conduct quality checks to ensure the finished plastic components meet the required dimensions and quality standards as described in the Quality specification sheets. Monitor the machines during the production process to prevent jams, malfunctions, or other issues and report in a timely manner to Process Technicians or Supervisor. Adhere to all safety protocols and procedures, including the use of personal protective equipment (PPE), to ensure a safe working environment. Maintain accurate production records, including the quantity and quality of plastic components produced during each shift to ensure information integrity. Collaborate with colleagues in the manufacturing department to ensure the seamless production of plastic products by communicating and providing assistance where necessary. Maintain a clean and organized working area to contribute to safety and well-being of co-workers. Other duties as assigned. QUALIFICATIONS: High school diploma or equivalent. Previous experience in a manufacturing setting and/or operating plastic cutting equipment for blow molding, injection molding, and extruder machine products, is preferred. Strong attention to detail and the ability to work with precision. Ability to use simple math arithmetic - addition and subtraction. Mechanical aptitude and troubleshooting skills. Excellent communication and teamwork skills, bilingual is a plus. Ability to lift, push, pull and carry up to 25 lbs. repetitively and stand for extended periods. WORKING CONDITIONS: The job involves working in a manufacturing environment that is not climate controlled and where exposure to heat, loud noise and dust is common.

Join the Essel team as an Industrial Production Worker and be part of a fast-paced manufacturing environment. As an Industrial Production Worker, you will be responsible for operating and maintaining production machinery, assembling products, and inspecting finished goods to ensure quality standards are met. Responsibilities include: * Operating production equipment and machinery according to standard operating procedures. * Assembling products and packaging finished goods. * Performing quality checks to ensure products meet specifications. * Performing routine maintenance and cleaning of machinery. * Following all safety protocols and wearing appropriate personal protective equipment.

Responsibilities: Insert plastic handles into plastic pails Orients finished parts on pallet/box as per production order Supply worksite with raw materials (handles/gaskets) Keep work area clean and organized for safety Continuously monitor quality of product and follow established protocols when defects are found Willing to work reasonable overtime as needed Attend all safety meetings. Requirements: High School diploma or equivalent Ability to work in a fast paced environment Ability to read, write and comprehend simple instructions in English Basic Math skills Ability to be on feet up to 12 hours per shift Use of hands and fingers to perform job function Ability to stoop, kneel, bend and climb Ability to work in confined spaces Ability to lift up to 35lbs Good vision to be able to see defects Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits. The pay range is $18.50 - 20.50/hour. Exact salary offered will depend on candidate's experience, work location, skills, etc.