Machinist Apprentice Jobs Near Me

- 62 Jobs
jobs
Let us run your job search
Sit back and relax while we apply to 100s of jobs for you - $25

  • Machinist

    At Siemens Energy, we are more than just an energy technology company. Requirements: 2+ years of Machinist experience Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. Support Lead Hand Millwright and / or Machinist in all functional areas
    $30-45 hourly5d ago

  • CNC Programmer

    Although the location of this position is in Sterling, VA from the time it may be required to undertake duties at other Thorlabs locations.
    $51k-67k yearly est.2d ago

  • Machinist

    Headquartered in Reston, Virginia, Leidos reported annual revenues of approximately $14.4 billion for the fiscal year ended December 30, 2022. The Mission Operations Division at Leidos is seeking a Mechanical Lead to support a government contract in the National Capital Region (NCR). * Possess machinist certification from an apprenticeship program, or demonstrated proficiencies from an accredited source or reference. Leidos is a Fortune 500 technology, engineering, and science solutions and services leader working to solve the world's toughest challenges in the defense, intelligence, civil, and health markets. The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary.
    $52k-69k yearly est.18d ago

  • Senior Machinist

    * Successful completion of machinist apprenticeship * Journeyman CNC Machinist qualification CACI is seeking a CNC Machinist with a minimum of 5 years' experience and at the equivalent of Journeyman level. Company Overview: At CACI, you will have the opportunity to make an immediate impact by providing information solutions and services in support of national security missions and government transformation for Intelligence, Defense, and Federal Civilian customers. * For over 55 years, the principles of CACI's unique, character-based culture have been the driving force behind our success. * Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives.
    $42k-57k yearly est.5d ago

  • Machinist II

    * Work with Machinist III & IV to develop and optimize complex or production operations. This position is responsible for the operation and maintenance of MSD machining equipment including basic levels of machine programming and troubleshooting to fabricate precision parts for developmental and manufacturing efforts Additionally, this role provides mechanical support to produce or repair product and/or equipment across multifunctional teams and departments.
    $45k-64k yearly est.2d ago

  • General Trades Apprentice

    Posting Details Posting Summary Working Title General Trades Apprentice Role Title Trades Technician II Role Code 79032-FP FLSA Non-Exempt Pay Band 02 Position Number 280W2152 Agency Northern VA Community College Division NV280-VP Administration Work Location Fairfax County - 059 Hiring Range $25/hr Emergency/Essential Personnel No EEO Category H-Service/Maintenance Full Time or Part Time Part Time Does this position have telework options? -Telework options are subject to change based on business needs- No Does this position have a bilingual or multilingual skill requirement or preference? Work Schedule 7am - 2:30pm Monday through Thursday Sensitive Position No Job Description General Description: This position will assist Trades Tech with installations, minor maintenance. P-14 will assist with repairs of some electrical and carpentry to include drywall work on campus buildings. To include snow removal and any other duties as assigned by Facilities Manager. Duties and Tasks: * Duties include assisting Trades Technician with minor installations and maintenance duties on campus. * To include snow removal and any other duties as assigned by Facilities Manager. Essential Functions: * Perform minor maintenance work, assist with troubleshooting and repairs as described above, support emergency operations. Special Assignments May be required to perform other duties as assigned. May be required to assist the agency or state government generally in the event of an emergency declaration by the Governor. KSA's/Required Qualifications KSAs: * Required KSAs: Knowledge of principles and best practices of maintenance. * Ability to work in hot and cold weather for extended periods of time. * Ability to follow written and oral instructions. * Ability to perform manual labor and to lift 75 pounds when needed * Ability to work at heights using ladders * Basic computer skills including Microsoft office suite. * Detail Oriented. * Strong mechanical skills. * Possesses critical thinking skills. * Possesses good physical strength. * Possesses good communication skills. * Knowledge of building systems and facilities maintenance. * Team Player Minimum Qualifications: * High school graduate or GED * Participated in a high school trades program * Valid Virginia driver's license and good driving record. Preferred Qualifications * Graduation from a high school trades program * Experience performing building trades work. Operation of a State Vehicle Yes Supervises Employees No Required Travel This position may require travel between NOVA campuses. Posting Detail Information Posting Number WGE_1336P Recruitment Type General Public - G Number of Vacancies 1 Position End Date (if temporary) Job Open Date 03/03/2023 Job Close Date 03/24/2023 Open Until Filled No Agency Website www.nvcc.edu Contact Name Email Phone Number Special Instructions to Applicants In support of the Commonwealth's commitment to inclusion, we are encouraging individuals with disabilities to apply through the Commonwealth Alternative Hiring Process. To be considered for this opportunity, applicants will need to provide their Certificate of Disability (COD) provided by a Certified Rehabilitation Counselor within the Department for Aging & Rehabilitative Services (DARS). Veterans are encouraged to answer Veteran status questions and submit their disability documentation, if applicable, to DARS to get their Certificate of Disability. If you need to get a Certificate of Disability, use this link: https://www.vadars.org/drs/cpid/PWContact.aspx , or call DARS at 800- 552-5019. Additional Information Northern Virginia Community College (NOVA) is the largest public institution of higher education in the Commonwealth of Virginia and one of the largest community colleges in the nation. NOVA enrolls nearly 75,000 students on its six campuses in Alexandria, Annandale, Sterling, Manassas, Springfield, and Woodbridge, as well as through NOVA Online and high school dual enrollment programs. The College offers more than 100 affordable associate degree and certificate programs to help our students reach their academic and professional goals in some of the most in-demand careers. At NOVA, we are deeply committed to fostering an inclusive community for all students, faculty, and staff, and our diverse workforce is representative of this commitment. To this end, we encourage all applicants seeking to add value through their diverse backgrounds, experiences, and interests to consider employment opportunities with NOVA. To learn more about NOVA's commitment to inclusive excellence, please visit our website. NOVA offers eligible employees a benefits package that includes a comprehensive health and dental insurance program, generous paid leave, deferred compensation plans, paid parental leave, state employee discounts, and a solid and secure retirement program. We strive to ensure our employees have the tools and development opportunities to support and promote NOVA's mission. For more information about NOVA and its programs and services, please visit our website at www.nvcc.edu. The security of our students, faculty, and staff is very important at NOVA. Please take a moment to review NOVA's Annual Security Reports. Background Check Statement Disclaimer The selected candidate's offer is contingent upon the successful completion of a criminal background investigation, which may include: fingerprint checks, local agency checks, employment verification, verification of education, credit checks (relevant to employment). Additionally, selected candidates may be required to complete the Commonwealth's Statement of Economic Interest. For more information, please follow this link: http://ethics.dls.virginia.gov/ EEO Statement The Virginia Community College System, an EEO employer, welcomes applications from people of all backgrounds and recognizes the benefits of a diverse workforce. Therefore, the VCCS is committed to providing a work environment free of discrimination and harassment. Employment decisions are based on business needs, job requirements and individual qualifications. We prohibit discrimination and harassment on the basis of race, color, religion, sex, national origin, age, sexual orientation, mental or physical disabilities, political affiliation, veteran status, gender identity, or other non-merit factors. ADA Statement The VCCS is an EOE and Affirmative Action Employer. In compliance with the Americans with Disabilities Acts (ADA and ADAAA), VCCS will provide, if requested, reasonable accommodation to applicants in need of access to the application, interviewing and selection processes. E-Verify Statement VCCS uses E-Verify to check employee eligibility to work in the United States. You will be required to complete an I-9 form and provide documentation of your identity for employment purposes. Quicklink for Posting https://jobs.vccs.edu/postings/58339 Supplemental Questions Required fields are indicated with an asterisk (*). * * I understand that this is a part-time position. In consideration thereof, I wish to proceed with the completion of my application. * No response. * Yes. * No. * * I understand that only information provided at the time of the application submission will be considered when determining my qualifications and only responses to Supplemental Questions that can be verified in my application and resume will be credited. * Yes * No * * I understand this position is not a remote position and I will be required to attend work in person. * Yes * No * * I understand this position is located in Virginia and I will be required to reside in the DMV metro area. * Yes * No * * Do you have a High school diploma or GED ? * Yes * No * * Have you participated in a high school trades program? * Yes * No * * Do you have a valid Virginia driver's license and good driving record ? * Yes * No * * Do you have basic experience with electricity ? * Yes * No Applicant Documents Required Documents * Resume Optional Documents * Cover Letter/Letter of Application * Other Document * Certificate * Certificate of Disability (COD)
    $25 hourly21d ago

  • CDL Apprentice-Local - Manassas, VA

    TheYellow Corporation, along with all subsidiary companies **,** dock to driver program starts on our dock where you work and learn dock operations, forklift training, and loading and unloading trailers. Then, Yellow trains individuals at the Yellow Truck Driving Academies. Yellow's training programs are a US Department of Labor Registered Apprenticeship Program. Academy classes meet 8-hours a day, 5-days a week for 4 weeks. While at the Driving Academy, **_students earn a wage for their training time and may be eligible for paid travel based on location_** **_._** After successful completion of the Driving Academy, students test for a Class A CDL with Hazmat, Tanker, and Doubles/Triples endorsements. The Yellow Driving Academies teach students skills to be the one of the safest drivers on the road. Our instructors, many with a million miles or more of safe driving experience, actively engage all students in the classroom, in the practice yard, and on the road. By joining Yellow, you attend our Best in Class Truck Driving Academy/Apprenticeship and enter a fulfilling, dynamic occupation. Paid training is at $17.50per hour. Once you receive your Class A CDL you will increase significantly to a qualified driver's pay. Once a student successfully completes the Yellow Driving Academy, they are trained at their home terminal for another 4 weeks. Once they are signed off to drive solo, their responsibilities include: + Operating a tractor-trailer (single, double, or triple trailer combination) in various driving environments and weather conditions between company facilities + Driving for extended periods of time + Maintaining truck electronic logging device (ELD) logs according to state and federal regulations + Performing Pre-trip and post-trip inspections of tractor/trailer(s) and En Route inspections with authorities + Dropping and hooking trailer(s) and changing equipment configurations as needed **ESSENTIAL DUTIES AND RESPONSIBILITIES** 1. Comply with all company policies local work and safety rules, and federal, state, and local regulations that govern the industry. 2. Follow company procedures for properly and safely loading and unloading freight. Safely operate an industrial powered forklift to load and unload freight. 3. Take and verify dispatch instructions. 4. Operate a tractor-trailer combination (single, double, or triple trailer combination) in urban, suburban, and rural environments and in all types of weather conditions between company facilities and various customers. 5. Drive truck to transport materials in liquid or packaged form to and from specified destinations, such as railroad stations, plants, residences, offices, or within industrial yards. Verify load against shipping papers. Drive truck to specified destination, applying knowledge of commercial driving regulations and roads in area. Prepare receipt for load picked up. Collect payment for goods delivered and for delivery charges. 6. Load and unload freight in varying weather conditions at the company and customer facilities, using the same procedures and techniques as a Dock Worker. 7. Safe operation of equipment and on-time movement of shipments between company locations and customers, meeting established run times and schedules. 8. Drop and hook trailer(s) and change the configuration of equipment, as necessary. Connect air hoses and electrical lines, install, and remove tire chains, and manually crank dolly wheels. 9. When hauling hazardous material, verify the hazardous material product description, determine any discrepancies in the paperwork, and verify proper placarding. 10. Conduct pre-trip and post-trip inspections. Inspect the operating condition of the tractor and trailer(s) before and after trip, and when stopped enroute. Take responsibility for reasonable and customary care for the security of equipment. 11. May maintain truck electronic logging device (ELD) logs according to state and federal regulations. May maintain telephone or radio contact with supervisor to receive delivery instructions. May inspect truck equipment as supplies, such as tires, lights, brakes, gas, oil, and water. May perform emergency roadside repairs, such as changing tires, installing light bulbs, fuses, and tire chains. **MINIMUM REQUIREMENTS** 1. Must be age 21 or older. 2. Possess a valid Class A CDL Permit. 3. Consent to and complete a DOT drug test and background check. 4. TSA background check with fingerprints. 5. Must have graduated from company-approved training program. 6. Must have a current motor vehicle report (MVR) that represents a history of safe operation. 7. Must have the ability to read, write and speak English sufficiently to converse with the general public, understand highway and traffic signs and signals, respond to official inquiries, read a bill of lading, and make accurate entries in daily driving log. 8. Ability to work various shifts and days of the week. 9. Two (2) Year Employment Agreement. **WORKING CONDITIONS** Environmental working conditions vary, and employee may encounter vibration, noise, odors, and extremes in temperature and wind as well as exposure to varied weather, varied surfaces, varied lighting and confined and congested areas and occasional exposure to petroleum-based products such as gasoline, diesel fuel, oil, and grease. **PHYSICAL DEMANDS** 1. Must meet Department of Transportation (DOT) physical requirements. 2. Ability to stand, sit, walk, and maintain balance for extensive periods of time. 3. Ability to push/pull/lift up to 75 pounds frequently, greater than 100 pounds occasionally. 4. Ability to climb ladders on the tractor and/or trailer(s) and frequently enter and exit the tractor cab. 5. Ability to perform repetitive tasks; stretch, turn, twist, and reach overhead; bend, crouch, squat, kneel and stoop for extensive periods of time. 6. Ability to operate industrial powered forklift, dolly, hand truck, pallet truck, carts, and other equipment necessary for loading and unloading freight. **Job Requirements** **MINIMUM REQUIREMENTS** 1. Must be age 21 or older. 2. Class A Learner's permit, Non-Excepted Interstate DOT Medical Card, and start a TSA background check with fingerprints. 3. Consent to and complete a DOT drug test. 4. Must have the ability to read, write and speak English sufficiently to converse with the general public, understand highway and traffic signs and signals, respond to official inquiries, read a bill of lading, and make accurate entries in daily driving log. 5. Ability to work various shifts and days of the week. 6. Two (2) Year Employment Agreement. **WORKING CONDITIONS** Environmental working conditions vary, and employee may encounter vibration, noise, odors, and extremes in temperature and wind as well as exposure to varied weather, varied surfaces, varied lighting and confined and congested areas and occasional exposure to petroleum-based products such as gasoline, diesel fuel, oil, and grease. **PHYSICAL DEMANDS** 1. Must meet Department of Transportation (DOT) physical requirements. 2. Ability to sit for extensive periods of time. Ability to walk, stand, and maintain balance. 3. Ability to seldom lift up to 70 lbs (to apply tire chains). 4. Ability to push/pull up to 148 lbs (connector kingpins, dollies, jiff locks, gates, etc.). 5. Ability to bend and stoop and maintain a crouching position for moderate amounts of time, to inspect the underside of the equipment, check tires, apply tire chains in winter. 6. Ability to climb ladders on the tractor and/or trailer(s) and frequently enter and exit the tractor cab. 7. Manipulative skills and dexterity to control an oversized steering wheel, shift gears using a manual transmission, and maneuver a commercial motor vehicle in crowded areas. 8. Ability to couple and uncouple combination vehicles, which requires the ability to repeatedly turn a crank and operate a release lever. Yellow Corporation, along with all subsidiary companies, is an Equal Opportunity/Affirmative Action Employer
    $17.5 hourly24d ago

  • Mobile Apprentice

    With locations across North America and more than $3 billion in tire and auto service sales, Bridgestone Retail Operations is the right place to build a career. Interacts daily with customers providing exceptional customer service and serves as the face of Firestone Direct in assigned market.Bridgestone Retail Operations (BSRO) is part of Bridgestone Americas and employs over 22,000 teammates in North America. Whatever role you fill, when you represent the Bridgestone name, you are a valued teammate, and part of our larger mission to Serve Society with Superior Quality.
    $29k-41k yearly est.18d ago

  • Fire Alarm Apprentice - Tysons, VA

    An Electrical Fire Alarm Apprentice assists in the installation of electrical equipment in accordance with all applicable plans, specifications, codes and industry standards.
    $32k-39k yearly est.46d ago

  • Tool Maker-C

    Are you a repair person at heart who enjoys problem solving and working on equipment? This position performs machine shop work for the repair and maintenance of dies, molds, and related equipment. This role involves performing machine shop work for the repair and maintenance of dies, molds, and related equipment. Our Mold & Metal Products group could be considered a ‘job shop' (build to order), meaning only about 2% of our projects are affiliated with our company and many others involve tooling for outside customers in the plastic injection, automotive, gas turbine and medical industries. All work takes place in a climate-controlled environment, and this is new tool build projects, working with wax dies assembly. Qualifications - Any combination of education and experience equivalent to a high school diploma or GED, and 5-8 years experience with molds / wax die assembly works. Two year technical or trade school degree preferred. - General knowledge of molds including: how to assemble and disassemble components of a molds, wiring of a hot runner system and polishing techniques. - Must be able to complete forms and checklists and read and understand work standards, blueprints, and technical drawings. - Knowledge of progressive tool & die making procedures and ability to work within close tolerances, desired. - Ability to fabricate tools and dies, desired. - Advanced mathematical skills (i.e., algebra, trigonometry). - May have to work overtime and may be assigned to other shifts based on company needs. Responsibilities -Disassembles, inspects cleans, repairs, and reassembles tools and dies according to established procedures and utilizing one or more of the following: hand tools, pneumatic tools, grinders, lathes, mills, EDM's, calipers, veneers, and metric rulers. - Diagnoses die problems by reading and inspecting blueprints and discussing the problems with Metal Stamping, Quality Assurance or Molding personnel. - Provides instruction and guidance to Tool & Die Maker A's and assists in their training (internal or state approved apprenticeship). - Operates and setups various types of machining equipment. - May program EDM machines using ladder logic/PLCs in order to fabricate tools and equipment. - May program CNC Milling machines using various software applications - Assembles, inspects cleans, repairs, and reassembles tools and dies according to established procedures and utilizing one or more of the following: hand tools, pneumatic tools, grinders, lathes, mills, EDM's, calipers, veneers, and metric rulers. Ensures that the tools and dies meet established written and verbal specifications. - Polishes steel mold blocks according to prints in order to establish dimensions. - Diagnoses die problems by reading and inspecting blueprints and discussing the problems with Supervisor, Manager or other Tool Makers. - Utilizes computer viewer to obtain mold dimensions and specifications. - Sets up and operates metal removing machines to fabricate components of tools and / or dies to specified tolerances.
    $44k-61k yearly est.11d ago

  • Machinist Foreman

    + Direct machinist operations in a coordinated effort to assist the press room/mail room managers to continuously improve upon the Production Quality Score, which integrates key performance measures such as reproduction quality, content freshness, productivity, and cost-effective materials consumption. Dow Jones is a division of News Corp (Nasdaq: NWS, NWSA; ASX: NWS, NWSLV). Dow Jones is a global provider of news and business information, delivering content to consumers and organizations around the world across multiple formats, including print, digital, mobile and live events. It is home to leading publications and products including the flagship Wall Street Journal, America's largest newspaper by paid circulation; Barron's, MarketWatch, Mansion Global, Financial News, Investor's Business Daily, Factiva, Dow Jones Risk & Compliance, Dow Jones Newswires, OPIS and Chemical Market Analytics. Dow Jones has produced unrivaled quality content for more than 130 years and today has one of the world's largest news-gathering operations globally. + Provide ongoing training and development on all job functions within the machinist or machinist/building department.
    $53k-70k yearly est.25d ago

  • Senior Machinist / Machine Shop Supervisor

    Amentum is actively searching for an experienced Senior Machinist to support our on-site prototyping / limited production run machine shop in Ijamsville, MD. Senior Machinist / Machine Shop Supervisor
    $45k-77k yearly est.12d ago

  • Machinist

    At Siemens Energy, we are more than just an energy technology company. Requirements: 2+ years of Machinist experience Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. Support Lead Hand Millwright and / or Machinist in all functional areas
    $30-45 hourly5h ago

  • CNC/Manual Machinist

    With more than 250 non-franchised offices, Aerotek's 8,000 internal employees serve more than 300,000 contract employees and 18,000 clients every year. As a Best of Staffing Client and Talent leader, Aerotek's people-focused approach yields competitive advantage for our clients and rewarding careers for our contract employees. Since 1983, Aerotek has grown to become a leader in recruiting and staffing services. Aerotek is an Allegis Group company, the global leader in talent solutions.
    $33k-44k yearly est.11d ago

  • Machinist Apprentice (Technician 1) - 13365

    The successful machinist apprentice candidate is expected to have little to no machining experience but shall possess a strong mechanical aptitude and a desire to learn skills that can serve as the foundation of a productive and rewarding career. At Commonwealth Technology Innovation (CTI), a Huntington Ingalls Industries (HII) company, we develop customized mission-enabling solutions that seamlessly blend technology and tradecraft.
    $32k-39k yearly est.40d ago

  • machinist foreman

    In addition, Randstad offers a comprehensive benefits package, including health, an incentive and recognition program, and 401K contribution (all benefits are based on eligibility). + Direct machinist operations in a coordinated effort to assist the press room/mail room managers to continuously improve upon the Production Quality Score, which integrates key performance measures such as reproduction quality, content freshness, productivity, and cost-effective materials consumption. For certain assignments, Covid-19 vaccination and/or testing may be required by Randstad's client or applicable federal mandate, subject to approved medical or religious accommodations. Randstad has a great opportunity for a Machinist foreman in White Oak with our well known client! Randstad is a world leader in matching great people with great companies. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Randstad. + silver spring , maryland
    $33k-44k yearly est.25d ago

  • CNC Machinist

    CNC Machinist Location: Wichita, KS Hourly rate: $22.00 Contractor benefits: Medical, Vision, Dental, 401k Job Description: up and operate a variety of 3, 4 or 5 axis machines, cutters, and work holding tools to produce precision parts. Includes reading and understanding the function of precision instruments to verify product conformance. Education and Experience High school diploma or equivalent Experience with 3, 4 & 5 axis machine operation required Responsibilities/Tasks Calculate dimensions or tolerances, using instruments such as micrometers or calipers and portable CMM or FARO. Machine parts to specifications, using 3, 4 & 5 axis machines Set up, adjust, or operate basic or specialized machine tools used to perform precision machining operations. Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines per set up documentation. Measure, examine, or test completed parts to check for defects and ensure conformance to customer using precision instruments, such as micrometers, calipers, and faro arms. Monitor the feed and speed of machines during the machining process. Maintain machine tools in proper operational condition. Study sample parts, blueprints, drawings, or engineering information to determine product conformance Operate equipment to verify operational efficiency. Diagnose machine tool malfunctions to determine need for adjustments or repairs. Confirm with engineering, supervisory, or inspection personnel to verify technical information. Fit and assemble fixtures and cutters to make or repair customer product. JOB DESCRIPTION EEO Statement Apollo Professional Solutions, Inc. is an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, marital status, age, national origin, ancestry, disability status, medical condition, pregnancy, genetic information, protected veteran status, gender, sexual orientation, gender identity or expression, or any other status or characteristic protected under federal, state, or local law. Must be U.S. Person for purposes of Export Compliance. Reference Number: VEVBA #GLD
    $22 hourly60d+ ago

  • Machinist -CNC EDM - Union Position (NASA Program)

    The position is part of Environmental Test and Integration Services contract at Goddard Space Flight Center located in Greenbelt, Maryland. Peraton drives missions of consequence spanning the globe and extending to the farthest reaches of the galaxy.
    $35k-50k yearly est.1d ago

  • CNC Machinist

    Although the location of the position is in Sterling, VA, from time to time it may be required to undertake duties at other Thorlabs locations.
    $46k-58k yearly est.2d ago

  • Machinist IV

    This position is responsible for the development of fabrication methods to produce parts and assemblies through the programming, setup, operation and maintenance of MSD machining equipment The incumbent ensures fabrication conformance to engineering specifications using necessary inspection equipment.
    $45k-64k yearly est.2d ago

Learn More About Machinist Apprentice Jobs

Average Salary For a Machinist Apprentice

Based on recent jobs postings on Zippia, the average salary in the U.S. for a Machinist Apprentice is $37,681 per year or $18 per hour. The highest paying Machinist Apprentice jobs have a salary over $46,000 per year while the lowest paying Machinist Apprentice jobs pay $30,000 per year

Updated March 26, 2023
Average Machinist Apprentice Salary
$36,870 yearly
$18 hourly

5 Common Career Paths For a Machinist Apprentice

Machinist

Machinists are skilled professionals who create metal works by using different machines. They work with clients to bring their clients' vision to life. They study the blueprints of the product that needs to be done and identify the parts that will need fabrication through machining. They then prepare the materials and equipment. Machinists use different tools such as grinders, drills, lathes, polishers, and milling equipment to create parts that are made of metal. They may sometimes work with other materials such as wood or plastic, but this is seldom. Machinists are expected to be proficient in the use of the machines, to be precise with their work, and can work within the committed timeline.

Computer Numerical Controller Machinist

A computer numerical controller machinist is responsible for operating computer-based equipment, creating new machine components by programming, and evaluating machine blueprints. Computer numerical controller machinists must have extensive knowledge of the technology industry to understand its complexities and define accurate solutions, as well as excellent analytical skills for calculation requirements. Other tasks include interpreting specifications and parameters, monitoring stock inventory, requesting operating tools, verifying accurate measurements, detecting machine malfunctions, and adhering to the safety standards and procedures of the operations area.

Numerical Control Operator

A numerical control operator is responsible for monitoring machinery and managing computer-generated equipment to produce tools and components from various mechanical resources. Numerical control operators must have extensive knowledge with the technology and mechanical industry to perform basic troubleshooting and detect malfunctions during operations. A numerical control operator duties' also include inspecting equipment setup and finished products, ensuring high-quality parts, reviewing blueprints, following client's specifications for making adjustments, and adhering to the safety guidelines and procedures required by the business.

Machine Operator

Machine operators are responsible for managing the machines assigned to them. They set up, install, operate, maintain, troubleshoot, and ensure quality output. Machine operators must know the inner workings of the machine such that they can easily address any problems that may arise. They must ensure that all components of the machine are working well. They perform maintenance routine checks to ensure that the machine is working at the most efficient capacity, is well-stocked with needed materials, and producing the best output. Machine operators are also responsible for ensuring the cleanliness and sanitation of the machine.

Maintenance Technician

Maintenance technicians are technicians who specialize in the preservation of office facilities. They have in-depth knowledge of how various office equipment or fixtures work so that they can immediately identify how to repair them in case of breakdowns. Maintenance technicians perform diagnostics and routine maintenance activities to ensure that everything in the office is running well. They immediately repair problems in fixtures or equipment to avoid any further damages or safety concerns. They should be familiar with occupational safety and health standards to ensure that the office is a safe place to work.

Illustrated Career Paths For a Machinist Apprentice

Machinist Apprentice

Machinist Apprentice Related Jobs

Machinist Apprentice Related Careers

What Similar Roles Do

Resume For Related Jobs

Updated March 26, 2023