Machinist jobs in Fairfield, CT - 107 jobs

Responsible for the complex set up and operation of Davenport Machines to fabricate production parts that meet quality standards, and execute preventive and corrective maintenance. REPORTING TO: Production Manager ESSENTIAL JOB FUNCTIONS: Independently, set up and operate Davenport machinery, including metal material feeds. Regularly perform preventive and corrective maintenance on Davenport machinery. Provide expertise and assist other machinists with setups and troubleshooting. Read and interpret blueprints. Perform visual product inspection and complete in-process inspection sheets. Properly use calipers, verniers, thread gauges and micrometer instruments to maintain requirements. Properly and safely load and unload materials for the machine. Utilize and abide by all safety procedures. Perform all tasks associated with the machine(s) in a safe and responsible manner to meet customer specifications and production standards. Comply with all quality policies, specifications, regulations and instructions. Other duties as assigned. SKILLS and ABILITIES: Effectively communicate and understand job instructions both verbal and written. Problem-solving skills. Attention to detail with precision equipment and products. Ability to perform basic mathematical computations. Ability to work in a fast-paced manufacturing environment. Multi-tasking skills a must. Heavy machinery operation. Experience with screw machining. EDUCATION and EXPERIENCE: High school diploma or GED required. 7+ years of Experience setting up and operating Davenport Machines. 10 years of experience in precision components manufacturing. PHYSICAL REQUIREMENTS: Required to stand for extended periods of time. Heavy exposure to oils. Exposure to noise and limited air ventilation. Constantly lifting and bending up-to 40 pounds on material and/or finished goods. EEOC STATEMENT: MW Industries, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

C Check-Mate Manufacturing offers competitive pay and benefits JOURNEYMAN TOOL & DIE MAKER (United States Citizens or Green Card Holders Only -No Sponsorships Available) ----------------------------------------------------------------------------------------------------------------------- Check-Mate Manufacturing has openings position for Tool and Die Maker. This position reporting to the Tooling Manager, the Tool and Die Maker has a Journeymen license or has completed formal apprenticeship program. Tool and Die Maker builds, repairs, and maintains: dies, fixtures, and all other tooling in conformance to customer and/or company specifications per control plans. Analyzes specifications, lays out metal stock, set up and operate machine tools, and fits and assembles parts to makes and repairs dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools. Maintains a safe working environment by ensuring compliance with procedures and safety regulations. US Citizens and Green Card Holders Only. -------------------------------------------------------------------------------- Skills and Competencies Tool and die maker ability to read tool and die designs and prints Tool and die maker basic shop math and trigonometry Tool and die maker ability to use precise measuring equipment such as micrometers, calipers, gauge blocks, dial indicators, etc. Tool and die maker ability to operate all standard tool room equipment such as milling machines, drill presses, surface grinders, lathes, etc. CNC machine set up a plus Tool and die maker must have strong analytical and troubleshooting skills Tool and die maker general knowledge of tool and die design including various tool steels/carbides and their application is a plus Tool and die maker able to work independently and be self-motivated Tool and die maker must be able to work without supervision and lead small teams as required Tool and die maker ability to work with appropriate outside vendors Tool and die maker ability to train and develop apprentices Tool and die maker ability to communicate well with others MINIMUM REQUIREMENTS High School Diploma or equivalent education or trade school diploma program Journeyman Tool & Die Maker and/ or completion of an apprenticeship (4 years) or advanced manufacturing certificate, followed by at least 4 years of on-the-job training 5 years' experience in the trade; emphasis on small precision stampings from progressive dies An ability to communicate effectively in English both in writing and verbally (Preferred) Knowledge/ experience with of AutoCAD, Solid works, and EDM (a Plus BENEFITS Excellent compensation packages Medical, Dental, Vision, Life, Short-term and long-term disability 12 Days PTO and 10 Holidays 401k participation after 1 year Training and Development Opportunities Annual COLA increases Relocation Assistance EOE/AA/M/F/VET/D

Do you thrive in a growing, fast paced, entrepreneurial environment? Do you aspire to work with a highly motivated workforce that develops and markets revolutionary industrial maintenance solutions for commercial HVAC, facility management, manufacturing, power generation, maritime and other industrial applications to global companies? Are you interested in working with industry experts to expand your knowledge base and skills? If so, we want you to join our talented team at Goodway Technologies (**************** as a Machinist . Goodway Technologies innovative products have been used by facilities and plant maintenance personnel worldwide for the maintenance of HVAC systems, plant machinery, hazardous material cleanup and other industrial maintenance needs. With a dynamic, results-oriented work culture and excellent opportunities for professional growth, we value intelligence, resourcefulness, team work, work ethic and a results-driven attitude. In the role of the Senior Machinist, you will perform the following: The Senior Machinist will work with minimal supervision, perform machining, fabrication, assembly and testing tasks in support of new product development. Read and interpret engineering drawings to visualize machining required and sequence of operations. Must have excellent verbal and written communication skills in English. As needed, perform small quantity general machining in support of production activities and customer special requests. Maintain the model shop in a neat, safe manner. Perform general maintenance on machines and tools. Interface with the companies' ERP system for jobs. The Machinist will perform the following duties: Responsibilities: Prototypes Work closely with Engineering to produce prototypes using various manufacturing methods and materials. Fabricate components Fasten various parts together Assemble and test complete units Fabricate jigs and fixtures Aid in the design, build, testing and diagnosis processes Change tasks quickly Production Produce “low and high volume” parts. Modify existing parts. Fabricate and maintain jigs and fixtures. Machine Operation not limited to: Lathes (CNC and manual) Milling Machines (CNC and manual) - Absolutely necessary. Grinders, sanders Welding (TIG, MIG, arc) 3D Printing Develop and maintain the ability to program CNC machining equipment utilizing models, drawings or sketches Understanding code to modify and/or enhance code for efficiency/affordability (troubleshoot) on CNC machines and report changes to appropriate personnel. Run other machines while CNC's are running. Measurement Systems Calipers Micrometers Scales, weight Protractors Shadow Graph Additional Tasks Responsible for executing additional tasks related to the position as needed or as assigned. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Qualifications Advanced machining skills are absolutely necessary 2+ years experience setting up and operating 3-axis CNC milling machines 2+ years setting up and operating conventional (manual) mills and lathes Experience generating and optimizing toolpaths and G-code using CAM software (Mastercam preferred) Demonstrated ability to maintain tolerances of 0.003” using manual milling and turning operations. NIMS (or equivalent) certifications preferred. Basic parts joining (solder, braze, weld: TIG / MIG / arc) Electro-mechanical assembly (wiring/plumbing) Computer skills - CAD/CAM, business software; email, input ERP job details Efficient at interpreting engineering drawings, using GD&T Be able to handle multiple tasks simultaneously Education/Experience Associates degree in a technical field (i.e. mechanical, electrical, etc.) or equivalent (minimum of 5 years in a similar environment as a machinist or NIMS-certified +2 years machining experience); 10 years of machining/model making experience preferred. Benefits Goodway Technologies offers excellent benefits to full-time eligible employees including paid holidays, paid time off, paid sick leave, health, dental and vision insurance, long-term disability, life insurance, and 401 K plan. Employees stay updated through company meetings, and we enjoy our vibrant culture through team building and social events held throughout the year. Goodway Technology Corporation is an Equal Opportunity Employer. Job Type: Full-time

Derecktor is looking for a full-time Inside Machinist. Candidates must have experience operating both CNC and manual cutting machines and precision measuring tools used to produce precision parts. Essential Duties and Responsibilities: These shall include, but not necessarily be limited to the following: Apply knowledge of mechanics, shop mathematics, machinability of materials, layout, and machining Interpret mechanical drawings/blueprints Set up machines, adjust settings, perform calibration, maintenance and repairs. Fabricate, modify and remanufacture parts required to maintain, repair and create machine tools and industrial machines Ability to run lathes, milling machines, drill presses, and surface grinder. Performs machine maintenance and is responsible for the immediate reporting of safety issues to Supervisor Ability to accurately measure with inside/outside micrometers, and report on results Ability to machine various metals and composites to exacting standards, including threading when needed Qualifications Knowledge, Skills, and Abilities: Keeps work area clean and organized to insure safety and environmental compliance. Ability to interpret mechanical drawings Able to perform duties with minimal supervision High attention to detail Must pass as drug test and background check Experience working in a shipyard/ship repair environment Minimum of five years of experience as Inside Machinist

Hamilton Connections is seeking candidates with CNC lathe experience for a machinist position at a manufacturing company in Newtown, CT. This is a temp-to-hire position. The hours are 7:30 a.m.-4 p.m., Monday-Friday. The salary is $24-$30 an hour, depending on experience. Job Responsibilities: Deliver production jobs on time and within budget Setup, maintenance and operation of lathes, CNC & NC machines Support the manufacturing engineering team to develop process sheets for new products Operate up to 3 machines at one time Set up machines for the next shift operators based on orders Review samples, drawings or instructions to understand specifications of output Plan the sequence of necessary actions for the completion of a job Take measurements and mark material for cutting or shaping Select appropriate machines and position or load material for a job Determine and program size of batches, speed of machine etc. First piece inspections using micrometers, calipers and 3D scanners to ensure parts are within tolerance Monitor machine while working to adjust the feed, maintain temperature and identify issues Check output to ensure consistency with specifications and discard defects Secondary duties such as deburring, welding, fabrication, assembly and other manufacturing tasks Maintain a safe working atmosphere and safe use of machines Other duties as assigned Job Requirements: 5 or more years of proven CNC lathe experience Experience operating multiple CNC machines at once Set up & run complete jobs from drawings & sketches Experience with machining titanium and aluminum Experience working to +/- 0.005 machining tolerance Experience changing tools, offsets and selecting programs on machines according to process method sheets Familiar with G code and programming of CNC machines Experience doing first piece inspections using micrometers, calipers and 3D scanners to ensure parts are within tolerance Deburring, welding, fabrication, assembly and other manufacturing experience a plus Ability to handle physical aspects of job, including heavy lifting Excellent written and oral communications skills Ability to collaborate on multiple projects with small technical team and other departments Strong customer centric focus A driven work ethic to problem solve Able to pass pre-employment screenings

Under the direction of the supervisor, either directly or through the leadperson, the tool and die maker is responsible for the proper set-up and operation of various tool room equipment with minimal supervision in the manufacture, repair or maintenance of a variety of tooling. Working from engineered drawings, specs and/or instructions from the leadperson or supervisor, the tool and die maker will have complete responsibility for determining the best methods and machines required in the manufacture or repair of tools to close tolerances. This individual must be able to operate a variety of machine tools such as lathes, millers, universal grinders, surface grinders and tooling such as collets, chucks, compression and cold head dies, punches, assembly fixtures, jaws, drill jigs, etc. This person must be able to use and interpret various precision measuring equipment such as micrometers, verniers, indicators and related gaging instruments. The tool and die maker is responsible for maintaining equipment in good working order through both periodic and proper lubrication and reporting of maintenance requirements to the leadperson or supervisor on a timely basis. This person must keep the work area and machine clean and will be responsible for the segregation, identification and transportation of parts in the work area. This individual will also be responsible for requisitioning, through the leadperson and the supervisor, any tool, and supplies required to accomplish an assigned job. This person will train new employees as required and other responsibilities include maintaining accurate production records and counts, performing unusual or experimental work and performing any other reasonable duties as assigned by the supervisor.

Job DescriptionDescription: JOB TITLE: Machinist Job Summary: We are seeking a skilled and experienced Machinist to join our team. The ideal candidate will have a minimum of 3 years of experience and be proficient in operating manual lathes, milling machines, and performing cylindrical grinding. This role requires a high level of precision and attention to detail to support our production and manufacturing operations. Key Responsibilities: · Operate and maintain manual lathes and milling machines to fabricate, modify, or repair parts and components. · Perform cylindrical grinding to achieve precise dimensions and surface finishes. · Interpret and work from technical drawings, blueprints, and specifications. · Measure and inspect parts using precision measuring tools to ensure adherence to required tolerances. · Perform routine maintenance on machining equipment. · Adhere to safety protocols and maintain a clean and organized work environment. · Collaborate with other team members to optimize workflow and ensure timely completion of projects. Qualifications: · Minimum of 3 years of hands-on experience as a machinist. · Proficiency in operating manual lathes and milling machines. · Demonstrated expertise in cylindrical grinding techniques. · Strong ability to read and interpret blueprints and technical drawings. · Familiarity with precision measuring instruments such as calipers, micrometers, and gauges. · Excellent problem-solving skills and attention to detail. · Ability to work independently and as part of a team. · Experience in a manufacturing or production environment. · Knowledge of machining a variety of materials, including metals and composites. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description Under the direction of the supervisor, either directly or through the leadperson, the tool and die maker is responsible for the proper set-up and operation of various tool room equipment with minimal supervision in the manufacture, repair or maintenance of a variety of tooling. Working from engineered drawings, specs and/or instructions from the leadperson or supervisor, the tool and die maker will have complete responsibility for determining the best methods and machines required in the manufacture or repair of tools to close tolerances. This individual must be able to operate a variety of machine tools such as lathes, millers, universal grinders, surface grinders and tooling such as collets, chucks, compression and cold head dies, punches, assembly fixtures, jaws, drill jigs, etc. This person must be able to use and interpret various precision measuring equipment such as micrometers, verniers, indicators and related gaging instruments. The tool and die maker is responsible for maintaining equipment in good working order through both periodic and proper lubrication and reporting of maintenance requirements to the leadperson or supervisor on a timely basis. This person must keep the work area and machine clean and will be responsible for the segregation, identification and transportation of parts in the work area. This individual will also be responsible for requisitioning, through the leadperson and the supervisor, any tool, and supplies required to accomplish an assigned job. This person will train new employees as required and other responsibilities include maintaining accurate production records and counts, performing unusual or experimental work and performing any other reasonable duties as assigned by the supervisor.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** Summary: To perform assigned machining operations using all applicable occupational skills with an absolute minimum of supervision and with an extremely high degree of competence. Essential Duties & Responsibilities: * Performs complex and intricate machine and assembly operations to production standards. * Produces simple sketches describing order of machining operations, when required. * Sets up, programs and operates automatic, semi-automatic and manual machine equipment including milling, lathe, punch press, drill press, grinders, shears, saws and related equipment necessary for the maching and manufacture of chassis, racks, consoles, brackets, terminal boards, printed circuit boards, panels, welding, sheet metal, repair rework, etc. * Records and maintains data, as required. * Works from complicated drawings, operation sheets, assembly procedures, material specifications and processes, sketches, verbal instructions, etc. * Knowledge of applicable Company and military specifications. * Capable of being certified to Company standards. * Works to extremely close tolerances with all types of machine tools. * Thorough knowledge of required shop mathematics. * Reads and interprets complex blueprints. * Determines type of machines and required sequences of operations. * Capable of drilling, pinning, riveting and assembly operations. * Sets up and runs operations on all types of machines and equipment. * Proficient in meeting all Company quality Standards required for job function. * Complies with all Company Safety Regulations and maintains a clean, non-hazardous work environment. * Capable of performing job tasks in accordance with all related Company Standard Operating Procedures (SOPs). * Complies with all related Company policies and procedures. Skills: * Minimum of 6 years directly related experience * Able to use a variety of precision measuring instruments * Experience with sheet metal & aluminum repairs * Welding experience helpful * Experience with hand tools * High School diploma or equivalent. #LI-KR1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $0 - $0 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Set up and operate machines such as CNC Machining Centers, (CNC Lathes/CNC Mills), Twin Spindles, Broaches, Turret Lathes, Drill Presses, Manual Milling machines & other like equipment to perform a full range of operations on a wide variety of materials in order to meet Department efficiency and productivity goals and objectives. Responsibilities: Sets up and operates machines such as CNC Machining Centers, (CNC Lathes/CNC Mills), Twin Spindles, Broaches, Turret Lathes, Drill Presses, Manual Milling machines & other like equipment to perform Turning, Chamfering, Drilling, Facing, Tapping, Threading, Forming, Milling, Broaching, etc. operations on materials such as brass, bronze, aluminum, steel, stainless steel, monel, cast iron, etc. Uses knowledge of all aspects of metal cutting technology geometry, machine characteristics of stock materials and selection of feeds and speeds to perform turning, milling, chamfering, drilling, facing, tapping, threading, forming, broaching, etc., operations. Works from blueprints, specifications, charts, handbooks and related data to assure part/product accuracy. Uses precision measuring instruments to inspect for close tolerances and desired finish on completed parts. Performs multiple machine tasks when required and may modify CNC programs to effectively produce parts. Assure proper workflow (first-in- first-out) following appropriate machine sequence and specified necessary tooling. Must retrieve and put back into specified location all tooling, fixturing and documentation at start and completion of job. Submit all requests to order tooling/supplies for authorization from appropriate personnel. Uses computers to check and coordinate incoming and outgoing work including all necessary paperwork by performing transactions relating to received materials, inventory control and outgoing orders. Unloads and places in location all materials received such as products, raw stock, castings, supplies, cartons, etc. Loads and unloads materials on to and from pallets, trays, racks and shelves. Operates manual or electric hand trucks/hoists to assist in loading tools or moving materials or parts. Delivers or routes materials to next operation/ department using equipment such as hand truck or cart. Maintains all coolant/oil levels and controls proper coolant mixtures in machines. Controls accumulation of and coordinates disposal of waste oil, coolants and other waste materials with responsible personnel. Submits all maintenance work orders (General Maintenance, Machine repair, & Safety Issues). Maintains good housekeeping by sweeping & mopping floors and pumping of machines/moats around equipment. Responsible for documentation, transactions and disposal of all non-conforming materials. Advises appropriate personnel of manpower constraints, equipment and inventory problems. Uses computers to collect, monitor and record data related to departmental performance i.e., On time delivery, efficiency, through put/cycle time. Requirements: Technical schooling equivalent to 1-year formal trades training in Metal Technology and CNC Machining; or one to three years related experience and/or training; or equivalent combination of education and experience. Ashcroft Inc. is an Equal Employment Opportunity Employer EOE AA M/F/Veteran/Disability Please note: The position requires U.S. Citizen, Permanent Legal Resident or granted Asylee/Refugee status under the Immigration and Nationality Act.

Machinist Class B Vacuum Instruments Corporation is one of the world's largest companies devoted solely to the research, design, manufacture, distribution, and service of leak detectors, gas handling equipment, and complete leak detection solutions. VIC is the only company in North America to offer both organically manufactured instruments and custom systems for tracer gas and air leak tests as well as gas management. VIC's staff of engineers, system design personnel and applications specialists constitute the most experienced body of leak detection experts in the world. Vacuum Instruments Corporation (VIC) offers an unparalleled breadth of application knowledge and gas handling experience along with the fastest, simplest, and most robust leak detectors in the industry. We are looking for a Class B Machinist for our Ronkonkoma facility. Must live in Long lsland, NY. This role is under limited supervision. You will perform basic and intricate manufactured parts using Manual Milling and Lathe machining. Also, some computerized machining operations to fabricate parts for a wide variety of systems. Required: Knowledge and experience in manual machining 2-3 years of previous experience. Maintains specifications by observing all operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes. Maintains safe operations by adhering to safety procedures and regulations. Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs. Conceptual skills, functional and technical skills, tooling, strong attention to detail, and solid judgment Basic math, geometry, and trigonometry Minimum 2-3 years of prior experience as a Manual Machinist.

Job Description We're hiring a Senior Machinist: CNC / GD&T / G&M Code / Setup with hands-on experience setting up and running multi-axis CNC equipment. You'll own setups end-to-end, help prove out new programs, and support both R&D builds and short production runs. What you'll do Read and interpret engineering drawings, setup sheets, and related documentation; apply GD&T requirements. Set up and operate multi-axis CNC milling and turning equipment (including mill-turn / live tooling where applicable). Configure workholding and fixtures (vise, soft jaws, tombstones, custom fixtures) per setup documentation and best practices. Run, validate, and help prove out new CNC programs; support first-article / first-piece verification. Diagnose machining issues and make minor program/parameter adjustments (feeds/speeds, offsets) during runs. Perform in-process and final inspection using standard precision metrology tools; document results as required. Maintain machines and work area (basic preventive care, cleanliness, chip/coolant management). Adapt between fast-turn prototype/R&D work and short-run production while maintaining quality and repeatability. About the team The CNC Machining team works directly with the engineering and manufacturing teams to produce precision components for propulsion and vehicle systems. About iRocket Founded in 2018, Innovative Rocket Technologies Inc. is revolutionizing the space industry as the first fully autonomous and 100% reusable rocket manufacturer. iRocket is building the world's first reusable rocket engines with a setup focused on reusability from the beginning, including high performance and long life. We will Recondition, Reload, and Relaunch™ our rockets synonymous with how we use airplanes today for multiple daily flights in under 24 hrs. achieving reusability 2.0. Utilizing cutting-edge 3D printing and additive manufacturing technology, we're dedicated to providing reliable and rapid access to space at a low cost. Our innovative design addresses the inefficiencies in the industry, while our proprietary reusable engine technology positions us as the leading small launch service provider. Join us on our journey to space. Requirements Required qualifications 3+ years experience as a CNC machinist/operator and setup technician in a precision environment. Must be proficient in G-Code and M-Code programming with the ability to troubleshoot, edit, prove out processes, perform first piece runs, and recommend changes to programs on multi-axis machine tools proficiently. Experience with multi-axis machining (3+1 / 3+2); familiarity with complex toolpaths and 3D surfaces. Experience with live-tooling lathes, mill-turns, or multi-task machines. Working knowledge of machining a range of materials (e.g., aluminum alloys, stainless, alloy steels, and other engineering materials). Solid understanding of tooling, tool life, cutters, and fixturing methods. Intermediate ability to interpret and apply GD&T. Able to take ownership of the setup and run process from start to finish; comfortable juggling multiple competing priorities. U.S. Person status required due to access to export-controlled technical data. Preferred qualifications Experience with simultaneous 5-axis setup and operation. Experience working with Okuma CNC machines and controllers. Comfortable referencing a CAD model to verify dimensions/features (model-based measurement). Experience with CMM inspection (e.g., PC-DMIS or similar). Waterjet experience. Additive manufacturing exposure (e.g., FDM/SLA) and/or post-processing familiarity. Benefits What we offer Competitive hourly pay at $33/hr-$43/hr (commensurate with experience) Benefits: [Health/Dental/Vision/401(k)/PTO] High-impact work on real aerospace hardware Fast-paced environment with direct collaboration across engineering, test, and manufacturing

Job DescriptionBenefits: 401(k) Competitive salary Dental insurance Paid time off Vision insurance Small job shop seeking well-established, permanent employee with a minimum of 5 years experience. The ideal candidate will be capable of single piece jobs, small run prototype and secondary operation production. Experience in turning, milling, blue print comprehension and inspection equipment is essential. Familiarity with aluminum, 300 series stainless and plastic is desirable. Salary negotiable, depending on experience.

Department Production Employment Type Full Time Location Glen Cove, NY Workplace type Onsite Compensation $35.00 - $40.00 / hour Key Responsibilities Skills, Knowledge and Expertise Benefits About Allied Maker Allied Maker is a Long Island-based design and manufacturing studio run by designers, Ryden & Lanette Rizzo. Allied Maker is committed to manufacturing luxury crafted lighting made in the USA. Inspired by raw materials that grow more beautiful with time, Allied Maker utilizes a hand-applied blackening process and brass that will develop a beautiful patina with use. Allied Maker's lighting fixtures can be seen in boutique hotels, residential and commercial projects worldwide and has been featured in publications such as Elle Decor, Dwell, Architectural Digest, NY Magazine and Domaine Home.

Job DescriptionM&S Machine & Tool is now hiring for a CNC Setup position. As an AS9100 job shop, our focus is precision machined components and the individual we seek will serve a key role within the company. REQUIREMENTS Must have proven experience with CNC setups. Lathe and MIll experience is preferred. Candidate is proficient with setting tools, securing and locating fixtures, inputting proper offsets to produce conforming product. Knowledge of G&M-code is necessary. Programming experience is a plus as we operate with MasterCam software. The ability to use accurately use precision measuring instruments and input offsets accordingly is essential. The right individual will be detailed oriented. Comfortable working independently and as a team player. Other skills set such as grinding, manual machining, and working with assemblies will also be considered. Pay varies significantly DOE Benefits include Health Care, Retirement, PTO

Company: Superior Motion Controls Superior Motion Controls is seeking a First-Class CNC Machinist to join our precision-driven metal manufacturing team. This role is ideal for a seasoned professional who thrives in a fast-paced, quality-focused environment and brings deep expertise in the setup, operation, and optimization of CNC machining centers. Primary Responsibilities: Set up, program, and operate vertical CNC machining centers to produce precision components per engineering specifications and drawings. Read and interpret complex blueprints, GD&T specifications, and setup sheets with minimal supervision. Perform first-piece inspections and make machine adjustments to ensure adherence to tight tolerances. Select appropriate tools, fixtures, speeds, and feeds to optimize productivity and part quality. Conduct routine maintenance and troubleshooting of equipment to ensure optimal machine performance. Maintain documentation and records for production runs, tool usage, and machine setup parameters. Collaborate with engineering, quality assurance, and production teams to improve machining processes and resolve technical challenges. Ensure compliance with all safety protocols and maintain a clean and organized work environment. Requirements Qualifications and Experience: Minimum 10 years of continuous hands-on experience in a CNC machining environment, with demonstrated expertise in setup and operation. Proficient in the use of precision measurement instruments including micrometers, calipers, height gauges, and dial indicators. Strong understanding of metal material properties (e.g., aluminum, steel, inconel, tool steel) and cutting tool technology. Demonstrated ability to work independently with minimal oversight while consistently delivering high-quality results. Experience with Fanuc, Haas, or similar CNC control platforms preferred. Physical Requirements: Ability to sit/stand at a CNC workstation for extended periods. Capability to lift up to 40 lbs as needed. Must be physically able to navigate the warehouse and access inventory at various heights.

Job Description Responsible to write, create, and test CNC programs. Ensure the produced CNC programs are optimized. Performs adjustments to adhere to established specifications or revisions. Monitor machining times and optimize it from time to time by recommending new machining techniques and methods to refine existing programs to programmers. Maintain the jigs and fixture. Keep machinery and work area in a clean, safe, maintained, and organized. Keep waste low, minimize scrap, use labor efficiently, and account for all parts on jobs. Improve on product through-put via additional operations such as multiple machine operation, deburring, cleaning, etc. whenever possible. Assist in other areas in order to meet the production needs of Essex and its customers. Comply with all PPE and machine guarding as necessary with each job. Required Education/Experience/Certifications: 5-7 years of machine shop experience and 2-year trade school completion; or equivalent demonstrated proficiency. Why Choose Essex? Since 1947, Essex has been offering high quality parts and services to our customers. Our employees are what makes that happen so we do our best to take care of what matters most, by offering a competitive total rewards package for our employees. It's our commitment to making this a great place to work. Benefits Base Pay and Overtime Pay Eligible Bonus Opportunity Paid time off 10 company holidays Training & Development Retirement Benefits - 401k matching Tax-Advantaged Accounts Medical, dental, vision coverage Flexible Spending Account Life Insurance Parental Leave Pet Insurance Employee Assistance Program The Guller Foundation, the charitable arm of Essex Industries, contributes to various local organizations

This position supports Click Bond's Operations and, under direct supervision, is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production equipment, secondary equipment, facility equipment and the facility grounds. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform highly diversified mechanical duties to install and maintain production machines and the plant facilities equipment. Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during scheduled machine service. Maintain and rebuild Baird and Waterbury Farrel presses, eyelet machines, and tool room equipment. Utilizing the computerized maintenance management system (CMMS), complete assigned repair work orders, preventative maintenance, predictive maintenance, and projects. Fabricate parts out of diverse types of material with or without the assistance of a print or drawing, by using milling machines, lathes, grinders, welders, shears, breaks, torches, presses, and other industrial equipment. Read and interpret key documents including equipment logs, equipment documentation, blueprints, diagrams, and schematics. Handling and utilizing compressed air and other gases safely and effectively. Monitor and maintain spare parts inventory. Perform routine tests and qualifications on equipment and document findings and results. General maintenance duties such as cleaning floors, removing garbage, unclogging drains. Utilize basic plumbing and carpentry skills to perform repairs. Safely and efficiently use Rigging and lifting equipment as needed. Operating a fork-lift as needed. Report immediately all suspicious and hazardous conditions to a supervisor. Understand and observe all safety guidelines and assure quality and safety by complying with all appropriate CB policies and procedures. Assist in maintaining clean, orderly, and hazard-free work areas. Able to work with minimal supervision, be a self-starter and be detail oriented. Other duties as assigned. Qualifications To perform this job successfully, an individual must be able to demonstrate the following competencies: Demonstrate a mature, problem-solving approach when dealing with all levels of site personnel, vendors, and customers as well as the ability to cope with hazardous conditions and heavy time demands. Must have knowledge of basic carpentry, plumbing and rigging skills. Capable of initiating and maintaining a plan of action in response to abnormal situations. Ability to communicate effectively, responsibly, and foster effective working relationships. Must possess mathematical skills including the ability to perform addition, subtraction, multiplication, and division with whole numbers, common fractions, and decimals in all units of measure. Basic computer skills including familiarity with Microsoft Office Suite. Ability to write and read English. EDUCATION AND/OR EXPERIENCE: High school diploma or GED required. Completion of craft apprenticeship, or minimum 4 years of equivalent experience required. Computerized maintenance management system (CMMS) experience preferred. Mig & stick welding experience preferred. State of Connecticut Machinist Journeymen's card preferred. Forklift operators certificate preferred. SUPERVISORY RESPONSIBILITIES: This is not a supervisory position. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasionally works on ladder or lift platform of heights of 20 feet or more. Must be able to work in a variety of physically awkward positions. Frequently lift and/or move materials and equipment weighing up to 50 pounds. Use of hand/fingers continuously through shift to manipulate components, tools, etc. Will stand upright for prolonged periods of time. Must be able to walk while carrying tools and equipment. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and the ability to focus. Regularly required to sit or stand for the length of shift, bend, and reach. WORK ENVIRONMENT: While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. Occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and sewage requiring PPE. The noise level in the work environment is usually moderate. Will primarily work in an area that is not climate controlled. Will occasionally have to work outside in the snow for grounds clean-up. CLICK BOND WAY - KEY ATTRIBUTES: Communicates respectfully to all team members, vendors, and visitors. Models a positive attitude. Actively listens to others and supports the team environment. Asks questions and learns from mistakes. Executes tasks with minimal errors in a timely and efficient manner. Attendance is consistent and meets or exceeds company standards. Click Bond is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information or any other protected classification. Click Bond complies with federal and state disability laws. Click Bond will provide reasonable accommodation when requested by a qualified applicant or employee with a disability unless such accommodation would cause an undue hardship. The policy regarding requests for reasonable accommodation applies to all aspects of employment, including the application process. If reasonable accommodation is needed, please contact People Operations at ************ or email: *********************

Job Description C Check-Mate Manufacturing offers competitive pay and benefits JOURNEYMAN TOOL & DIE MAKER (United States Citizens or Green Card Holders Only -No Sponsorships Available) ----------------------------------------------------------------------------------------------------------------------- Check-Mate Manufacturing has openings position for Tool and Die Maker. This position reporting to the Tooling Manager, the Tool and Die Maker has a Journeymen license or has completed formal apprenticeship program. Tool and Die Maker builds, repairs, and maintains: dies, fixtures, and all other tooling in conformance to customer and/or company specifications per control plans. Analyzes specifications, lays out metal stock, set up and operate machine tools, and fits and assembles parts to makes and repairs dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools. Maintains a safe working environment by ensuring compliance with procedures and safety regulations. US Citizens and Green Card Holders Only. -------------------------------------------------------------------------------- Skills and Competencies Tool and die maker ability to read tool and die designs and prints Tool and die maker basic shop math and trigonometry Tool and die maker ability to use precise measuring equipment such as micrometers, calipers, gauge blocks, dial indicators, etc. Tool and die maker ability to operate all standard tool room equipment such as milling machines, drill presses, surface grinders, lathes, etc. CNC machine set up a plus Tool and die maker must have strong analytical and troubleshooting skills Tool and die maker general knowledge of tool and die design including various tool steels/carbides and their application is a plus Tool and die maker able to work independently and be self-motivated Tool and die maker must be able to work without supervision and lead small teams as required Tool and die maker ability to work with appropriate outside vendors Tool and die maker ability to train and develop apprentices Tool and die maker ability to communicate well with others MINIMUM REQUIREMENTS High School Diploma or equivalent education or trade school diploma program Journeyman Tool & Die Maker and/ or completion of an apprenticeship (4 years) or advanced manufacturing certificate, followed by at least 4 years of on-the-job training 5 years' experience in the trade; emphasis on small precision stampings from progressive dies An ability to communicate effectively in English both in writing and verbally (Preferred) Knowledge/ experience with of AutoCAD, Solid works, and EDM (a Plus BENEFITS Excellent compensation packages Medical, Dental, Vision, Life, Short-term and long-term disability 12 Days PTO and 10 Holidays 401k participation after 1 year Training and Development Opportunities Annual COLA increases Relocation Assistance EOE/AA/M/F/VET/D Powered by JazzHR rdpu XPZWHm