Machinist jobs in Kentwood, MI

Job Description JOURNEYMAN TOOL & DIE MAKER requires relocation to Thomasville, GA.- ------------------------------------------------------------------------------------------------- *US Citizens and Green Card Holders only* -Relocation assistance available- Check-Mate Manufacturing has openings position for Tool and Die Maker. This position reporting to the Tooling Manager, the Tool and Die Maker has a Journeymen license or has completed formal apprenticeship program. Tool and Die Maker builds, repairs, and maintains: dies, fixtures, and all other tooling in conformance to customer and/or company specifications per control plans. Analyzes specifications, lays out metal stock, set up and operate machine tools, and fits and assembles parts to makes and repairs dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools. Maintains a safe working environment by ensuring compliance with procedures and safety regulations. ESSENTIAL FUNCTIONS: Includes, but may not be limited to the following Tool and die maker conduct test runs with completed tools or dies to ensure that parts meet specifications; makes adjustments as necessary. Tool and die maker cuts, shapes, and trims blanks or blocks to specified lengths or shapes, using power saws, power shears, rules and hand tools. Tool and die maker files, grinds, shims, and adjusts different parts to properly fit them together. Tool and die maker fit and assembles parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools and hand tools. Tool and die maker inspect finished dies for smoothness, contour conformity, and defects. Tool and die maker lifts, positions, and secures machined parts on surface plates or worktables, using hoists, vises, v-blocks, or angle plates. Tool and die maker measures, marks, and scribes' metal or plastic stock to lay out machining, using instruments such as protractors, micrometers, scribes, and rulers. Tool and die maker select metals to be used from a range of metals and alloys, based on properties such as hardness and heat tolerance. Tool and die maker set up and operates conventional or computer numerically controlled machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes. Tool and die maker set up and operate drill presses to drill and tap holes in parts for assembly. Tool and die maker smooths and polishes flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders. Tool and die maker studies blueprints, sketches, models, or specifications to plan sequences of operations for fabricating tools, dies, or assemblies. Tool and die maker verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators. Tool and die maker visualize and computes dimensions, sizes, shapes, and tolerances of assemblies, based on specifications. Tool and die maker casts plastic tools or parts, or tungsten-carbide cutting tips, using pre-made molds. Tool and die maker designs jigs, fixtures, and templates for use as work aids in the fabrication of parts or products. Tool and die maker develop and designs new tools and dies, using computer-aided design software. Tool and die maker set pyrometer controls of heat-treating furnaces, and feed or place parts, tools, or assemblies into furnaces to harden. Skills and Competencies Tool and die maker ability to read tool and die designs and prints Tool and die maker basic shop math and trigonometry Tool and die maker ability to use precise measuring equipment such as micrometers, calipers, gauge blocks, dial indicators, etc. Tool and die maker ability to operate all standard tool room equipment such as milling machines, drill presses, surface grinders, lathes, etc. CNC machine set up a plus Tool and die maker must have strong analytical and troubleshooting skills Tool and die maker general knowledge of tool and die design including various tool steels/carbides and their application is a plus Tool and die maker able to work independently and be self-motivated Tool and die maker must be able to work without supervision and lead small teams as required Tool and die maker ability to work with appropriate outside vendors Tool and die maker ability to train and develop apprentices Tool and die maker ability to communicate well with others Safety, Health, Environmental (SH&E) Tool and die maker ability to manually operate tool room machinery Tool and die maker ability to access tooling both in and out of machines to troubleshoot problems Tool and die maker support and comply with all procedures and work instructions. Tool and die maker must observe all safety regulations to ensure employees own safety as well as the safety of others. Support a safe and healthy work environment that is free of recognized hazards for all employees, contractors and visitors. Tool and die maker cooperate with all local, state and federal agencies, such as OSHA or the EPA, in the event of an inspection. Tool and die maker know and follow all applicable SH&E Policies and Procedures. MINIMUM REQUIREMENTS High School Diploma or equivalent education or trade school diploma program Journeyman Tool & Die Maker and/ or completion of an apprenticeship (4 years) or advanced manufacturing certificate, followed by at least 4 years of on-the-job training 5 years' experience in the trade; emphasis on small precision stampings from progressive dies An ability to communicate effectively in English both in writing and verbally (Preferred) Knowledge/ experience with of AutoCAD, Solid works, and EDM (a Plus BENEFITS Excellent compensation packages Medical, Dental, Vision, Life, Short-term and long-term disability 12 Days PTO and 10 Holidays 401k participation after 1 year Training and Development Opportunities Annual COLA increases Relocation Assistance EOE/AA/M/F/VET/D Powered by JazzHR 19wfY1VIB6

Woodward is committed to creating a great workplace for all team members. Our company and its members are committed to acting with integrity, being respectful and accountable to one another, and staying humble and driven, while maintaining the highest professional and ethical standards. We are steadfastly committed to attracting the best talent across our communities creating a rewarding workplace. Together we are fulfilling our purpose to design and deliver energy control solutions our partners count on to power a clean future. Woodward supports our members' wellbeing and regularly benchmarks with other companies in our industry to offer an extensive Total Reward package for this position. Salary will be determined by the applicant's education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Estimated hourly base pay: $24.11 (min)- $30.14 (mid)- $36.17 (max) with a10% shift premium All members included in annual cash bonus opportunity. All members included in annual cash bonus opportunity. 401(k) match (4.5%) Annual Woodward stock contribution (5%) Tuition reimbursement and Training/Professional Development opportunities for all members 12 paid holidays, including floating holidays. Industry leading medical, dental, and vision Insurance upon date of hire Vacation / Sick Time / Vacation Buy-up / Short Term Disability / Bereavement leave. Paid parental leave. Adoption Assistance Employee Assistance Program, including mental health benefits. Member Life & AD&D / Long Term Disability / Member Optional Life Member referral bonus Spouse / Child Optional Life / Optional AD&D / Healthcare and Dependent Care Flexible Spending Voluntary benefits, including: Home / Auto Insurance discounts Whole Life Insurance / Critical Illness Insurance / Legal Assistance / Military Leave Are you ready to make your mark? If you're looking to join a dynamic team and innovative organization as a Machinist 1, we have an exciting opportunity for you. Woodward in Zeeland, MI is looking for Machinist 1 on our 2nd shift, Monday through Friday from 2:00 pm to 10:00 pm to join our team. This position will be responsible for performing various assembly and testing processes on our products. If you have experience in assembly in a manufacturing environment, apply now! What you will be doing Essential Functions Assist in the set up, and operate machines with little or no supervision and perform required process checks or inspections per the process documentation Complete paperwork while adhering to record retention requirements. Utilizes basic continuous improvement processes to improve operational effectiveness. Document nonconforming material according to procedures, participate in activities to implement root cause and corrective actions identified. Adhere to all safety standards, regulations and operating procedures. Utilize computer programs to enter part data (e.g., serial number), log time, look up instructions and blueprints and download programs. Utilize work instructions, set-up sheets and method documents to correctly operate machines and inspect machined parts. Utilize various gauging equipment to ensure conformance to the engineering specifications and standards through the production run. Clean and maintain measuring instruments and test equipment and inspect parts for cleanliness (e.g., routed and deburring operations). Operate precision inspection equipment and perform first piece check out when applicable to the job. Interpret and follow blueprints for proper production task completion. Perform routed operations of precision close tolerance parts. Other Functions Communicate information to others about project status, updates, specific instructions, etc. and review item status in MRP to ensure item is logged/closed out appropriately. Clean and organize the immediate work area. May perform secondary work functions such as deburring and sub-assembly with certifications, as required. (Does not apply in Duarte.) May provide training to others in the department when necessary. May set up Computer Numerical Controlled (CNC) machinery and make adjustments when necessary. Monitor and maintain the condition of cutting tools. Notify supervisors and other personnel of production or machine problems. Promote teamwork within the organization. Verify the calibration of equipment and expiration dates. Obtain certifications as necessary for required processes. Complete and review product paperwork, verifying all paperwork is present and filled out appropriately. Follow all departmental safety rules and regulations. What We Are Looking For To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Knowledge/Skills/Abilities: Knowledge of and ability to apply inspection techniques (e.g., formalized inspection standards, inspection instructions, best practices) and use inspection tools efficiently. The ability to read and use micrometers, functional and cylindrical gauges, comparators, indicator setups, calibration stickers and scales. The ability to read, interpret and use the information presented in drawings, diagrams and blueprints to determine appropriate activities, tools, and next steps in the production process. Ability to learn and use available business software as necessary. Knowledge of part special handling guidelines and specifications. Ability to learn nonconformance procedures and processes when parts fail inspection. This includes knowledge of systems required to log and track failed inspections and associated documentation as needed within area of responsibility. Knowledge of Geometric Dimensioning and Tolerancing such as perpendicularity, parallelism, flatness. This includes the ability to interpret tolerances on prints and perform inspection techniques. This includes the ability to interpret datum structures, material condition tolerances, orientation tolerances. Knowledge of CNC (Computer Numerically Controlled) programming/machining including the ability to read, understand, edit basic programs and/or basic knowledge of one or more of the following skills - grinding, turning, milling, drilling. Knowledge of how quality impacts the success of the organization including costs to customers, costs of recalls and potential costs due to negative impacts on a company's reputation. This includes taking the necessary steps to ensure quality on a consistent basis and striving for improvement. The ability to use computer and web-based systems to input, access, modify, or output information or to execute programs. The ability to write effectively, to read and understand work documents, to communicate information clearly to coworkers and supervisors, and the ability to listen attentively and comprehend key pieces of spoken information. General knowledge of machines and equipment functionality, and how tools could be used on such equipment/machines. This includes the ability to learn new systems quickly, understanding how parts relate, and how they impact system functionality. The ability to provide excellent service to internal customers. The ability and willingness to demonstrate eagerness, enthusiasm, and optimism for work activities. This includes the ability and willingness to take ownership of work activities, to learn and understand company policies and procedures. The ability to accurately provide the information requested on specific forms, reports, and logs. The ability to define, diagnose, and resolve problems with limited troubleshooting and problem solving. The ability to interact cooperatively and collaboratively with others as a team. Moderate physical activity requiring agility and dexterity, including walking, standing, or bending; and lifting or moving objects. Work is performed in an area with moderate risk or discomfort that may require special safety precautions, such as wearing protective clothing or gear. May be required to pass Near Vision and/or Color Vision examinations. Education or Formal Training: High school diploma or equivalent required. Experience Required: At least 1 year of related work experience or applicable degree from a trade school. Woodward is an independent designer, manufacturer, and service provider of control solutions for the aerospace and energy markets. Our aerospace systems and components optimize the performance of fixed wing and rotorcraft platforms in commercial, business and military aircraft, ground vehicles and other equipment. Our energy-related systems and components enhance the performance of industrial gas and steam turbines, reciprocating engines, compressors, wind turbines, electrical grids and other energy-related industrial equipment. The company's innovative fluid energy, combustion control, electrical energy, and motion control systems help customers offer cleaner, more reliable and more efficient equipment. Our customers include leading original equipment manufacturers and end users of their products. Woodward is an Equal Opportunity Employer and does not discriminate in hiring or employment on the basis of race, color, religion, sex (including sexual orientation and gender identity), national origin, age, disability, protected veteran status, or any other category protected under federal, state, or local laws. EO/AA/M/F/Disabled/Protected Veterans

Job Title: Machinist I Reporting to the Tool & Mold Manager, the Machinist I analyze specifications, lays out metal stock, sets up and operates machine tools, and fits and assembles parts to fabricate and repair metalworking dies, cutting tools, jigs and fixtures, gauges, and machinists' hand tools. Responsibility: Studies specifications such as blueprints, sketches, models, or descriptions, and visualizes product to determine materials required and machines to be used to fabricate parts. Sets up and operates machine tools such as lathes and milling machine to machine parts and verifies conformance of machined parts to specifications. Programming of CNC controls using basic “G” code. Lifts machined parts and positions and secures parts on surface plate or worktable. Smooths flat and contoured surfaces and power grinders and fits and assembles parts together and into assemblies and mechanisms. Communicate information to next shift operator or lead person. Use a variety of shop equipment to build components. Other duties as assigned. Academic/Educational Requirements: High School diploma or general education degree (GED) Required Skills/Experience: Must have at least 1 year of experience in casting or machining. Must be able to read, write and communicate effectively in a fast- paced tool shop environment. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to read and use measuring instruments: micrometers, calipers, hole gauges and depth micrometers. Ability to understand g code programming and ability to set up and run CNC milling machines for construction of 3-d mold cavities and 2-d planar milling. What Linamar Has to Offer: Competitive Compensation Employee Benefits package includes but is not limited to, Drug, Dental & Vision etc. 401k Program Opportunities for career advancement. Sustainability Council Community based outreach supporting both local and global initiatives and charities. Discounts for local vendors and events, including auto supplier discounts. About Us: Linamar Corporation is a Canadian-founded global manufacturer, renowned for its advanced engineering and innovative product development across diverse industries and markets. Our journey started in 1966 under the visionary leadership of our founder, and today, we remain committed to cultivating a culture of innovation and collaboration. With access to state-of-the-art tools and resources, you'll have the opportunity to make a meaningful impact alongside a team of driven and passionate professionals. Join us and be part of a company where innovation, collaboration, and growth are at the heart of everything we do. Linamar Corporation is an equal opportunity employer and encourages diversity in the workplace without regard to any basis protected by applicable federal, state, or local law. Linamar Corporation encourages applications from all qualified individuals and will reasonably accommodate applicants throughout all stages of the recruitment and selection process upon request.

Responsibilities: • Studies machining instructions such as job order, blueprint, process sheet, or layout on work piece to determine machining required, sequence of operation, tooling, feed, and speed rate • Positions and secures work piece to table, angle plate, vise, or chuck and verifies position. Selects and mounts tools. • Moves controls to set feeds, speeds, and depth of cut, and to position tool and work piece in relation to each other, verifying position visually, with instruments, and by reading dials • Verifies dimensions of machined work piece with such measuring instruments as micrometers, telescoping gauges, vernier calipers, and dial indicators. Works to close tolerances. • Uses precision positioning devices such as dial indicators mounted on machine troughs with standard length rods and work to close tolerances • Operates machine with automatic positioning controls • Lays out reference lines and machining locations on work piece, according to blueprints • CNC programming using “Mazatrol” and “Fanuc” G code utilizing Visi Software Requirements: • Journey Machinist or 3 to 5 years of experience as skilled machinist or successful completion of the apprenticeship program. • Mechanical skills and aptitude. • Proficient in Blueprint reading • Basic Math and Reading skills. Knowledge of highspeed carbide tooling. • Ability to maintain a safe and clean work environment while complying with all quality, safety, and work rules and regulations • Ability to safely operate an overhead crane and forklift • Owns tools, measuring devices and small hand tools. Experience with Mazatrol and Fanuc software preferred Previous Lathe experience preferred **Must be able to work 2nd shift hours as well as overtime including weekends as needed**

Job title: Tool and Die Maker Reports to: Foreman Supervisory responsibilities: Apprentices Summary/objective: Advanced Tooling Systems (ATS) is seeking a Tool and Die Maker to join their night shift team! The Tool and Die Maker is responsible for coordinating with all departments required to produce a die to the specifications/designs provided in a manner consistent with their training - this includes tasks such as: analyzing specifications, laying out metal stock, setting up and operating machine tools, and fitting and assembling parts to fabricate and repair metalworking dies, cutting tools, jigs and fixtures, gauges, and machinists' hand tools by performing the following Essential Functions. Essential functions: Follow the die from cradle to customer. Die maker is responsible for every aspect of the tool. Conduct test runs with completed tools or dies to ensure that parts meet specifications; make adjustments as necessary. File, grind, shim, and adjust different parts to properly fit them together. Fit and assemble parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools and hand tools. Lift, position, and secure machined parts on surface plates or worktables, using hoists, vises, v-blocks, or angle plates. Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines, and grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes. Study blueprints, sketches, models, or specifications to plan sequences of operations for fabricating tools, dies, or assemblies. Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators. Lead die construction and try out. Follow all safety rules and report unsafe work conditions to management. Keep work area clean. Maintain appropriate tools and keep current on tool calibration. Required competency, education, and experience: Minimum 1 year of experience as a Tool and Die Maker High School Graduate or Equivalent Diemaker Journeyman Status or Equivalent Valid driver's license. Work environment: Manufacturing environment. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually moderate. Physical demands: While performing the duties of this job, the employee is regularly required to stand. The employee is frequently required to walk; use hands grip or handle; reach with hands and arms and talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision and ability to adjust focus. Position type and expected hours of work: Full time, Night Shift. Schedule may vary based on shift. Monday thru Friday 4:15 pm - 2:45 am. Travel: Compensation/Benefits: ATS offers a competitive compensation and benefits package which includes competitive pay, dental insurance, vision insurance, health insurance, short term disability, long term disability, company paid life insurance, voluntary life insurance, 401(k) plan with match, education reimbursement, paid vacation and holidays, and flex spending. Other duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice. ATS is an Equal Opportunity Employer. ATS does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

Job Title: Tool & Die Maker Job Type: Full-Time Department: Tool Room Classification: Non-Exempt, Hourly Reports To: Tool Room Manager Job Purpose The Tool & Die Maker is responsible for producing high-precision tooling using various equipment, including surface grinders, CNC machines, and mills. This position requires expertise in crafting complex angles and radii to support the manufacturing of tight-tolerance parts while maintaining high standards of quality and productivity. Essential Duties and Responsibilities The following key responsibilities outline the expectations for this role and support both departmental objectives and the company's commitment to delivering high-quality products: Maintain all tooling and sensor equipment in proper working condition. Implement tooling improvements as directed by engineering and support departments. Ensure all tooling is safe and production-ready before it leaves the Tool Room. Follow all safety protocols, operate equipment properly, and promptly report unsafe conditions. Identify and resolve problems efficiently by gathering data, analyzing information, and proposing effective alternatives. Proactively seek opportunities to improve product quality, demonstrate accuracy, and attention to detail. Troubleshoot and repair machine tools, fixtures, dies, and related components. Read and interpret blueprints, CAD files, and production specifications accurately. Train and mentor team members on technical tasks and job responsibilities. Requirements Education and Experience: Proven ability to perform tasks accurately and thoroughly. Strong organizational skills and a methodical approach to work. Completion of a state- or federally-accredited apprenticeship program and possession of a journeyman card, or a minimum of 10 years of relevant experience. Proficient in interpreting 2D prints and 3D CAD designs to convert concepts into finished products using raw materials. Strong verbal and written communication skills. Versatile machining experience, including proficiency with mills, lathes, drill presses, grinders, and hand tools. Ownership of personal die-making and machinist tools. Experience in building and testing progressive dies. Team-oriented, adaptable, and receptive to changes in direction. Ability to work effectively under pressure in a fast-paced environment. Capable of making sound decisions based on company guidelines and procedures. Strong problem-solving skills with a goal-oriented mindset. Welding skills are a plus. Physical Requirements Ability to bend, twist, reach, sit, stand, and walk throughout the workday. Able to walk on level surfaces for extended periods. Must maintain consistent mental and visual focus while working with tools and on computers. Ability to lift machine components weighing up to 50 lbs. Language Requirements Proficiency in reading, writing, and understanding English is required. Personal Protective Equipment (PPE) Safety glasses must always be worn in manufacturing areas. Hearing protection is required in designated zones. Arm sleeves or a long-sleeved shirt in designated zones. Work Environment Work is primarily performed in a manufacturing setting. Appropriate safety gear must be worn as needed Disclaimer: This position description is intended to outline the core responsibilities and requirements associated with the role. Employees are expected to be familiar with and adhere to all company operating procedures and instructions relevant to their areas. This job description is not exhaustive, and JIREH METAL reserves the right to modify duties as needed at management's discretion. This may be communicated formally or informally, either verbally or in writing. Employees may also perform other reasonably related business duties as assigned by their immediate supervisor or management.

Job Title: Tool and Die Maker Apprentice The Tool and Die Maker Apprentice assists in the construction, maintenance, and repair of stamping dies, fixtures, and other precision tooling while completing a structured apprenticeship program. Under the supervision of experienced journeyman toolmakers, the apprentice gains hands-on experience and classroom training to develop the skills required to become a certified Tool and Die Maker. Key Responsibilities: Assist in the assembly, disassembly, repair, and maintenance of progressive, line, and transfer dies. Operate basic machining equipment such as mills, lathes, surface grinders, and drill presses under supervision. Learn to read and interpret blueprints, CAD drawings, and GD&T specifications. Perform tasks such as deburring, polishing, fitting, and stoning die components. Support die tryouts, spotting, and press adjustments as directed by journeyman toolmakers. Follow safety procedures and maintain a clean and organized work area. Record training hours and tasks completed as part of apprenticeship documentation. Attend and successfully complete all required technical instruction and evaluations. Communicate effectively with mentors and ask questions to support skill development. Required Skills and Experience: High school diploma or GED required. Enrollment in or willingness to enter a state-certified Tool and Die Apprenticeship Program. Strong mechanical aptitude and interest in precision machining and toolmaking. Ability to follow directions, work safely, and demonstrate attention to detail. Basic knowledge of hand tools, measuring instruments, and shop math is preferred. Good attendance, work ethic, and willingness to learn from experienced tradespeople. Physical demands: Ability to lift up to 50 pounds and perform physical activities such as standing, bending, and kneeling. Must be comfortable working in a machine shop environment (noise, grease, metal shavings, etc.). Use of PPE (safety glasses, steel-toe boots, gloves, hearing protection) required. Work environment: Manufacturing environment. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually moderate. For employment at Greenville Tool and Die you must pass a pre-employment drug screen and physical.

Aerospace is Soaring and So Are We! Our customers are high tech leaders in commercial and defense aerospace. We utilize leading edge advanced manufacturing technology and processes to make and deliver complex, short run close tolerance machined parts and value-added assemblies. Our customers value our track record of quality and delivery success and so they are fueling our growth with new and interesting parts to work on for them. A-Shift (M-Thurs 6AM-4:30PM) B-Shift (M-Thurs 7:30 PM to 6:00 AM) . Training for all shifts will take place on A-Shift (M-Thurs 6AM- 430PM) for a duration of no less then 90 Days Job Description The purpose of this position is to support the department's ability to achieve its goals and objectives. This includes the safe and efficient operation of Swiss style CNC equipment allowing for the achievement of customer expectations for quality and on-time delivery. Other duties may be assigned as needed. Essential Duties: The following are the normal duties performed by this position. Other duties may be assigned. 1. Operate swiss style (Citizen) CNC lathes to produce the required number of correct parts in a timely manner according to process documentation. This can include operating multiple pieces of equipment simultaneously. 2. Correctly setup jobs in assigned equipment in a timely manner. 3. Perform 1st piece, in-process and last piece inspection using micrometers, calipers, comparators, various gauges and CMM equipment according to process documentation. 4. Perform data collection and communication tasks in Job Boss and other applications. 5. Perform operator maintenance. 6. Diagnose and correct equipment or tool issues. 7. Perform de-burr or rework of work in-process. 8. Make recommendations to optimize and improve assigned processes. 9. Maintain work station to 5S standards. 10. Perform all work according to PAC safety standards. 11. Comply with all PAC policy and procedures. Qualifications 1. A Track record of employment success. Successful essential duty related experience, including operation of CNC controlled relevant equipment including swiss lathes and automatic screw machines. 2. Firm understanding of machining center theory, including x, y and z axis, along with edge and centerline pickup. 3. Ability to use common measuring equipment such as micrometers, calipers, gauges (pin, thread, indicator, height), optical comparators and coordinate measuring machines (CMM). 4. Significant collaboration and communication skills related to continuous improvement and customer 5. Blueprint reading skills to GD&T standards 6. High school diploma or equivalent. Trade school classes or certifications preferred. 7. Basic Windows and MS Office skills. 8. Ability to perform shop math functions. 9. Eligibility to work with sensitive controlled data and materials according to ITARs policy and practice. Additional Information PAC is an equal opportunity Affirmative Action employer.

Job DescriptionJob Title CNC MachinistLocation Wayland, MIPay $20.00 - $34.00 per hour Shift We are seeking a skilled CNC Machinist to join a company specializing in large and complex machining. In this role, you will set up and operate CNC machines, ensure part accuracy, and maintain quality and safety standards. What You'll Be Doing Plan machining by studying work orders, blueprints, engineering plans, materials, and GD&T requirements. Interpret blueprints and mechanical drawings for part specifications. Translate instructions into computer commands to run CNC machinery accurately. Prepare and load raw materials and parts onto machines. Perform test runs to confirm outputs meet required specifications. Set machines to complete full production cycles. Maintain records, equipment, and supplies. What We're Looking ForPreferred Qualifications: Ability to read work orders, blueprints, and engineering plans. Understanding of GD&T and machining parameters. Ability to program or enter commands into CNC equipment. Valid ID or Driver's License. Must be a U.S. Citizen. Preferred Skills: Crane and forklift experience preferred. Ability to lift up to 40 lbs. Strong work ethic and desire to learn a versatile skill set. Basic math skills. Ability to perform facility cleaning. Self-starter with strong initiative. Workbox Staffing Benefits: Weekly Pay Hire-in Opportunities Comprehensive Benefits including Health, Life, and Dental Veteran-Friendly and Equal Opportunity Employer Apply online today and let's DO GOOD together! #GRS2

Job title: CNC Machinist Reports to: CNC Supervisor Supervisory responsibilities: None. Summary/objective: Produces machined parts by setting up and operating a computer numerical control (CNC) machine. Essential functions: Download programs and MDI (Manual Data Input) as needed. Setup and machine to the proper programs and tolerances required. Recheck setups, change cutters and inserts, and make adjustments as needed to achieve the best possible results. Maintain appropriate tools and keep current on calibration. Keep work area clean. Follow all safety rules and report unsafe work conditions to management. Regular attendance at work during scheduled work hours. Employees may be requested to perform other job functions as required. Operate overhead cranes Required competency, education, and experience: Experience with 3 axis mills A well rounded knowledge of cutters and inserts, and feeds/speeds. Candidate must have high school or equivalent education. Candidate must have valid driver's license Preferred education and experience: Experience with automation cell Experience with 4-axis milling Two years of machining experience Programming experience using Fusion 360 Work environment: Manufacturing environment Physical demands: Candidate must have full use of all limbs. Candidate must be able to read and speak English. Candidate must be able to lift 40 pounds. Position type and expected hours of work: Full time, weekend day-shift. Friday through Sunday 5:00 am - 5:15 pm. Travel: None. Compensation/Benefits: SCT offers a competitive compensation and benefits package which includes competitive pay, dental insurance, vision insurance, health insurance, short term disability, long term disability, company paid life insurance, voluntary life insurance, 401(k) plan with match, education reimbursement, paid vacation and holidays, and flex spending. Other duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice. SCT is an Equal Opportunity Employer. SCT does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

Job Description Building the future of tooling, begins with building a great team! Commercial Tool & Die (CTD), located in Comstock Park, MI is looking for experienced 5-Axis CNC Machinist!! The ideal candidate must have experience (5+ years) specifically with 5 axis machining. At CTD, we offer growth opportunities, great benefits and a climate-controlled facility. Our state of the art facility boasts the latest machining technology in the area and our workforce can build the impossible. This position will manufacture parts per specifications in an accurate and timely manner, utilizing CNC machining. Primary Responsibilities: Set-up and operate CNC machines Utilize the ERP system Follow instructions (i.e. work orders, 2-D drawings, process sheets, etc.) to ensure that parts are produced to engineering specifications Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and calipers Perform repairs where needed Set up, adjust, and operate all of the basic machine tools and many specialized or advanced variation tools in order to perform precision machining operations Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines Accurately record data and information Maintain continuity among shifts through communication and documentation Follow procedures written in the Quality Systems Manual Qualifications and Skills Proficient computer skills including the use of MS office Experience with WorkNC or PowerMill is preferred Knowledge in use of precision measuring tools, including but not limited to: micrometers (ID, OD, and depth) and calipers Ability to interact effectively with various departments in the organization Effective communication and conflict resolution skills Troubleshooting and problem solving skills required Must possess strong work values; Dependability, honesty, self-confidence, positive attitude, and good attendance A minimum of five (5) years of 5-axis experience High School Diploma or equivalent is required Commercial Tool Group (Commercial Tool & Die; CG Automation & Fixture; and CG Plastics) is an Equal Opportunity Employer Job Posted by ApplicantPro

What Timken makes possible begins with you. Those who came before us helped land a man on the moon, create the world's infrastructure, and introduce renewable energy alternatives. Now you can join the Timken team to write your own unique story and help drive what's next. A career at Timken means you can have an immediate impact doing Work That Matters to the world- improving the efficiency of today's industrial equipment and preparing for the future of motion on our planet and beyond. New employees can start contributing right away, and there are many opportunities to advance your career at your own pace. Join our global team of 20,000 people in 46 countries, and start helping our customers push the limits of what's possible in their world of motion. Rollon by Timken is growing in MI! We are seeking an experienced CNC Machinist to join our team. Our ideal candidate will have a min of 3-5 years of experience running large mills, including programming, have Haas and Fanuc controls experience and solidworks profiiciency. Esprit and solidworks CAD to CAM experience is a plus! Willing to train candidates who are interested in growing their career in manufacturing. Shift Schedule: First shift | Mon - Fri | occasional OT available on weekdays and Saturdays Primary Job Functions: Keep spindle running Run CNC Bridge Mill / Large-format machining 8 meter and 12 meter Boring Mills with Fanuc Panels and Manual Tool Changing Haas Mills Setup Tooling during long cycle operations Setup Large Parts online and offline Maintain production schedule and cycle times Keep workspace clean and maintained Perform routine maintenance on machine(s) and work centers Daily cleaning of work area Track schedule Lathe experience a plus Minimum Qualifications: Applicant must be able to walk, stand, climb, lift up and/or move up to 50 pounds, see, hear and use hands to handle or feel and reach with hands and arms High School diploma or equivalant Legally authorized to work in the US without sponsorship - no sponsorship is available for this position CNC Experience of 3-5 years min *Mazak experience or knowledge a plus. Specifically, Mazak Horizontal machining center* Postion offers a comprehensive benefits package that includes, health, dental, vision, life, disability, vacation time, 10 paid holidays per year, sick time, tuition reimbursement, 401(k) w/company match. All employment offers are contingent upon a successful background check and negative drug screen, and include verification of a High School diploma/equivalent. All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law. Timken is a global technology leader in engineered bearings and industrial motion. Our expanding portfolio of next-generation solutions helps customers around the world improve efficiency, solve their toughest challenges, and push the boundaries of performance. We employ 19,000 people globally, operate from 45 countries, and posted $4.6 billion in sales in 2024. We have been recognized as one of America's Most Responsible Companies 5x by Newsweek and one of the World's Most Ethical Companies 14x by Ethisphere. Why Choose Timken? Over a century of knowledge and innovation A culture of top performance A global, diverse environment Products that contribute to a sustainable world A conviction to improve communities around us Competitive salary and benefits Not Ready To Apply? Stay connected by joining our network and we'll keep you informed about upcoming events and opportunities that match your interests. Talent Community

Job DescriptionLocation: Van Buren County, MI Pay: $18.00 - $25.00/hour Schedule: Monday - Friday, 7:00 a.m. - 3:30 p.m. Job Overview:CDR ProSource is partnering with a precision manufacturing company located in Van Buren County, MI. Known for its commitment to quality craftsmanship and innovation, the company is looking to expand its team with a skilled and dependable General Machinist. Key Responsibilities: Operate and maintain a variety of machines, including mills, grinders, lathes, and drill presses. Read and interpret blueprints, schematics, and technical drawings to produce accurate parts. Perform routine maintenance and troubleshoot machine issues. Ensure product quality from start to finish. Use precision measuring tools such as micrometers, calipers, and depth gauges. Work both independently and collaboratively in a team environment. Qualifications: 1-3 years of experience as a machinist, or equivalent technical training. Strong mechanical aptitude, attention to detail, and commitment to quality. Must own basic machinist tools. Willingness to work overtime, including occasional weekends. Energetic, safety-conscious, and reliable. Physical Requirements: Able to lift 50-70 lbs with assistance. Comfortable performing physically demanding tasks throughout the workday. Apply today and join a team where your skills and reliability are valued!

Job title: Tool and Die Apprentice Reports to: Foreman Supervisory responsibilities: None. Summary/objective: Advanced Tooling Systems (ATS) is looking for a Tool and Die Apprentice to add to their day shift team! ATS's program is registered through the Department of Labor. The ideal candidate would have basic machine shop experience, a good work ethic, and the ability to stay focused on tasks. Essential functions: Attend and successfully complete all required apprenticeship classes Learn and successfully demonstrate the ability to operate all required machines, tools, and equipment Assist with die construction and tryout Maintain appropriate tools Follow all safety rules and report unsafe work conditions to management Keep current on tool calibration Keep work area clean Regularly attend work during scheduled work hours Perform other job functions as required Ability to work nights, come in early and stay late as needed Required competency, education, and experience: Candidate must have a high school diploma/GED Preferred education and experience: Machining experience/basic knowledge Additional eligibility qualifications: None. Work environment: Manufacturing environment. Physical Demands: Ability to use all limbs Ability to lift and move up to 40 pounds Ability to receive and carry out both oral and written instructions safely and efficiently Ability to read, write, and speak English Ability to wear required PPE Position type and expected hours of work: Full-time. Day shift. Travel: None. Compensation/Benefits: ATS offers a competitive compensation and benefits package which includes competitive pay, dental insurance, vision insurance, health insurance, short term disability, long term disability, company paid life insurance, voluntary life insurance, 401(k) plan with match, education reimbursement, paid vacation and holidays, and flex spending. Other duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice. ATS is an Equal Opportunity Employer. ATS does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. Powered by JazzHR SB8mRAcdhI

Description: Job Title: Tool & Die Maker Job Type: Full-Time Department: Tool Room Classification: Non-Exempt, Hourly Reports To: Tool Room Manager Job Purpose The Tool & Die Maker is responsible for producing high-precision tooling using various equipment, including surface grinders, CNC machines, and mills. This position requires expertise in crafting complex angles and radii to support the manufacturing of tight-tolerance parts while maintaining high standards of quality and productivity. Essential Duties and Responsibilities The following key responsibilities outline the expectations for this role and support both departmental objectives and the company's commitment to delivering high-quality products: Maintain all tooling and sensor equipment in proper working condition. Implement tooling improvements as directed by engineering and support departments. Ensure all tooling is safe and production-ready before it leaves the Tool Room. Follow all safety protocols, operate equipment properly, and promptly report unsafe conditions. Identify and resolve problems efficiently by gathering data, analyzing information, and proposing effective alternatives. Proactively seek opportunities to improve product quality, demonstrate accuracy, and attention to detail. Troubleshoot and repair machine tools, fixtures, dies, and related components. Read and interpret blueprints, CAD files, and production specifications accurately. Train and mentor team members on technical tasks and job responsibilities. Requirements: Education and Experience: Proven ability to perform tasks accurately and thoroughly. Strong organizational skills and a methodical approach to work. Completion of a state- or federally-accredited apprenticeship program and possession of a journeyman card, or a minimum of 10 years of relevant experience. Proficient in interpreting 2D prints and 3D CAD designs to convert concepts into finished products using raw materials. Strong verbal and written communication skills. Versatile machining experience, including proficiency with mills, lathes, drill presses, grinders, and hand tools. Ownership of personal die-making and machinist tools. Experience in building and testing progressive dies. Team-oriented, adaptable, and receptive to changes in direction. Ability to work effectively under pressure in a fast-paced environment. Capable of making sound decisions based on company guidelines and procedures. Strong problem-solving skills with a goal-oriented mindset. Welding skills are a plus. Physical Requirements Ability to bend, twist, reach, sit, stand, and walk throughout the workday. Able to walk on level surfaces for extended periods. Must maintain consistent mental and visual focus while working with tools and on computers. Ability to lift machine components weighing up to 50 lbs. Language Requirements Proficiency in reading, writing, and understanding English is required. Personal Protective Equipment (PPE) Safety glasses must always be worn in manufacturing areas. Hearing protection is required in designated zones. Arm sleeves or a long-sleeved shirt in designated zones. Work Environment Work is primarily performed in a manufacturing setting. Appropriate safety gear must be worn as needed Disclaimer: This position description is intended to outline the core responsibilities and requirements associated with the role. Employees are expected to be familiar with and adhere to all company operating procedures and instructions relevant to their areas. This job description is not exhaustive, and JIREH METAL reserves the right to modify duties as needed at management's discretion. This may be communicated formally or informally, either verbally or in writing. Employees may also perform other reasonably related business duties as assigned by their immediate supervisor or management.

Aerospace is Soaring and So Are We! Our customers are high tech leaders in commercial and defense aerospace. Because of advancements in technology leading to significant fuel savings, the aerospace industry is positioned for unprecedented growth. We are looking to add a number of talented CNC Machinists to assist with this tremendous growth. We utilize leading edge technology and processes to make and deliver complex, short run close tolerance machined parts and value-added assemblies. Our customers value our track record of quality and delivery success and they are fueling our growth with new and interesting part opportunities. Job Description We are looking to add quality CNC Machinists to our Night shift (B-Shift M-Thurs 7:30PM-6:00AM) Summary: The purpose of this position is to support the department's ability to achieve its goals and objectives. This includes the safe and efficient operation of CNC Equipment allowing for the achievement of customer expectations for quality and on-time delivery. Other duties may be assigned as needed. Essential Duties: The following are the normal duties performed by this position. Other duties may be assigned. 1.Operate CNC Mills and lathes to produce the required number of correct parts in a timely manner according to process documentation. This can include operating multiple pieces of equipment simultaneously. 2.Correctly setup jobs in assigned equipment in a timely manner. 3.Perform 1st piece, in-process and last piece inspection using micrometers, calipers, comparators, various gauges and CMM equipment according to process documentation. 4.Perform data collection and communication tasks in Job Boss and other applications. 5.Perform operator maintenance. 6.Diagnose and correct equipment or tool issues. 7.Perform de-burr or rework of work in-process. 8.Make recommendations to optimize and improve assigned processes. 9.Maintain work station to 5S standards. 10.Perform all work according to PAC safety standards. 11.Comply with all PAC policy and procedures. Qualifications Suggested Qualifications: 1.5+ years of successful essential duty related experience, including operation of CNC controlled relevant equipment. 2.Firm understanding of machining center theory, including x, y and z axis, along with edge and centerline pickup. 3.Ability to use common measuring equipment such as micrometers, calipers, gauges (pin, thread, indicator, height), optical comparators and coordinate measuring machines (CMM). 4.Significant collaboration and communication skills related to continuous improvement and customer 5.Blueprint reading skills to GD&T standards 6.High school diploma or equivalent. 7.Basic Windows and MS Office skills. 8.Ability to perform basic math functions. 9.Ability to lift/push/pull 75 pounds periodically. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionJob Title CNC MachinistLocation Wayland, MIPay $20.00 - $34.00 per hour Shift 2nd Shift - 3:30 pm to 1:30 am, Monday through Friday We are seeking a skilled CNC Machinist to join a company specializing in large and complex machining. In this role, you will set up and operate CNC machines, ensure part accuracy, and maintain quality and safety standards. What You'll Be Doing Plan machining by studying work orders, blueprints, engineering plans, materials, and GD&T requirements. Interpret blueprints and mechanical drawings for part specifications. Translate instructions into computer commands to run CNC machinery accurately. Prepare and load raw materials and parts onto machines. Perform test runs to confirm outputs meet required specifications. Set machines to complete full production cycles. Maintain records, equipment, and supplies. What We're Looking ForPreferred Qualifications: Ability to read work orders, blueprints, and engineering plans. Understanding of GD&T and machining parameters. Ability to program or enter commands into CNC equipment. Valid ID or Driver's License. Must be a U.S. Citizen. Preferred Skills: Crane and forklift experience preferred. Ability to lift up to 40 lbs. Strong work ethic and desire to learn a versatile skill set. Basic math skills. Ability to perform facility cleaning. Self-starter with strong initiative. Workbox Staffing Benefits: Weekly Pay Hire-in Opportunities Comprehensive Benefits including Health, Life, and Dental Veteran-Friendly and Equal Opportunity Employer Apply online today and let's DO GOOD together!

Job title: CNC Machinist Reports to: CNC Supervisor Supervisory responsibilities: None. Summary/objective: Produces machined parts by setting up and operating a computer numerical control (CNC) machine. Essential functions: Download programs and MDI (Manual Data Input) as needed. Setup and machine to the proper programs and tolerances required. Recheck setups, change cutters and inserts, and make adjustments as needed to achieve the best possible results. Maintain appropriate tools and keep current on calibration. Keep work area clean. Follow all safety rules and report unsafe work conditions to management. Regular attendance at work during scheduled work hours. Employees may be requested to perform other job functions as required. Operate overhead cranes Required competency, education, and experience: Experience with 3 axis mills A well rounded knowledge of cutters and inserts, and feeds/speeds. Candidate must have high school or equivalent education. Candidate must have valid driver's license Preferred education and experience: Experience with large mills Experience with right angle head Two years of machining experience Programming experience using Fusion 360 preferred Work environment: Manufacturing environment Physical demands: Candidate must have full use of all limbs. Candidate must be able to read and speak English. Candidate must be able to lift 40 pounds. Position type and expected hours of work: Full time, day shift. Friday through Sunday, 5:00 am - 5:15 pm. Travel: None. Compensation/Benefits: SCT offers a competitive compensation and benefits package which includes competitive pay, dental insurance, vision insurance, health insurance, short term disability, long term disability, company paid life insurance, voluntary life insurance, 401(k) plan with match, education reimbursement, paid vacation and holidays, and flex spending. Other duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice. SCT is an Equal Opportunity Employer. SCT does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need. Powered by JazzHR eN8tmqZVBp

Job Description Building the future of tooling, begins with building a great team! Commercial Tool & Die (CTD), located in Comstock Park, MI is looking for experienced CNC Machinists! The ideal candidates must have experience (3-5+ years) specifically with 3/5 axis programming. We offer shift premiums: 10% for Night Shift and 20% for Weekends! At CTD, we offer growth opportunities, great benefits and a climate-controlled facility. Our state of the art facility boasts the latest machining technology in the area and our workforce can build the impossible. Primary Responsibilities: Operate and program the CNC machine to perform cutting Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and calipers Perform repairs where needed Set up, adjust, and operate all of the basic machine tools and many specialized or advanced variation tools in order to perform precision machining operations Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines Qualifications and Skills Proficient computer skills including the use of MS office Experience with WorkNC or PowerMill is preferred Ability to interact effectively with various departments in the organization Effective communication and conflict resolution skills Must possess strong work values; Dependability, honesty, self-confidence and a positive attitude A minimum of 3-5 years of 3/5-axis programming experience High School Diploma or equivalent is required Commercial Tool Group (Commercial Tool & Die; CG Automation & Fixture; and CG Plastics) is an Equal Opportunity Employer Job Posted by ApplicantPro