Machinist jobs in Portland, ME

ranges from $30.04/hr - $33.36/hr. This is an experienced position to work in the Machinist Trade. Machinists primarily set-up and operate machine shop equipment including (but not limited to): lathes, radial drills, grinders, presses, punch presses, cut-off saws, milling machines, HBM, VTL, rolls, sheers, brakes, and burning machines. Applicants hired into this position shall generally be able to operate most equipment with minimal training based on prior experience, including CNC operated equipment. Machinists may be assigned any of the Machinist Trade tasks. Required/Preferred Education/Training Preferred: - High School Diploma or GED Required: - Technical school or at least two years of training in CNC machine operation. - Knowledge of G-code. Required/Preferred Experience Required: - Minimum 3 years demonstrated experience in the Machinist Trade. - Must be able to read blue prints. - Must be able to demonstrate knowledge and use of G-code. - Must be able to read measuring tools: tape measure, inside and outside micrometers, Vernier or dial calipers, dial indicators, etc. and perform simple math calculations. - Must meet the requirements of the Machinist physical task analysis.

Job Description Manufactures detailed parts and tools from blueprints, sketches, drawings, or verbal instructions using various computer- or mechanically controlled machine tools and equipment. Sets up and operates mills, lathes, computer-controlled equipment (CNC) machine tools, grinders, and other machine equipment using mathematical and geometrical calculations. Uses precision measuring instruments to check and maintain tolerances. Calculates dimensions using measuring instruments. Installs, aligns, secures, and adjusts cutting tools and work pieces. Monitors the feed and speed of machines. Measures and examines completed products for defects. Deburrs all surfaces of parts or products to ensure that they conform to specifications. May also perform complex and varied machining operations in prototype experimental activities. Assists engineers in design, development, and evaluation of new products and recommends product improvements or manufacturing modifications. Typically sets up medium-complexity, unproven parts. May also be responsible for setting up medium to high proven parts. Essential Duties and Responsibilities include, but are not limited to: • Set up, operate, and maintain CNC milling and turning centers according to complex blueprints and specifications. • Retrieve job related information (job routings, part drawing, tool lists, work-instructions, etc.) • Select and utilize appropriate cutting tools and work holding for various materials and machining processes. • Document manufactured quantities and all required processes utilizing ERP system • Perform precise measurements and inspections to ensure parts meet stringent quality control standards. • Participate in continuous improvement initiatives to optimize machining efficiency. • Maintain a clean and safe work environment, adhering to all safety protocols. • May assist with developing new machining methods and tooling for complex parts. • Other duties assigned. Qualifications: Experience and Education: 6-8 years of relevant experience High school degree or equivalent, plus advanced training Technical Skills: Excellent attention to detail Working knowledge of customer specifications and requirements Basic computer skills Problem solving abilities Ability to use calipers, micrometers, etc. Mastery of basic math (addition, subtraction, multiplication, division, and fractions) Strong teamwork and communication skills to get along with co-workers and be a team player Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time o Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A

CNC Machinist 2nd shift/ Elmet Technologies/Lewiston, Maine Made in America; Since 1929, Elmet Technologies, located in Lewiston Maine, has been manufacturing world-class components that help power, protect, and connect our nation. From defense and aerospace systems to advanced technologies and energy infrastructure Elmet machinists don't just make parts, they make a difference! In the Precision CNC Machinist job you will work with some of the hardest materials on Earth to create precision components that shape industries and safeguard our future. If you take pride in your craft, precision, and country, this is where you belong. Why You'll Love Working at Elmet DAY ONE Health Insurance coverage! 3 plans to choose from, starting at $22.85 out of pocket per paycheck for single coverage. Day One: Dental, Vision, Disability, Life and Pension! Competitive Pay: $25 - $40/hr. based on experience and technical depth. Stability & Growth: Full-time, year-round roles with clear advancement opportunities. Amazing Retirement Plan: - 401(k) with 4% company match when you contribute at least 5%. Paid Vacation & Holidays: Because balance matters. Veteran-friendly employer. Working with a business that continues to invest in the future. Patriotic Purpose: Every part you make supports American innovation, security, and manufacturing strength. What You Bring to the Precision CNC Machining job! 3+ years of CNC machining experience (5-axis experience preferred). Certificate, diploma, or associate degree in Precision Machining, CNC Technology, or related field, or equivalent experience. Strong understanding of GD&T, blueprint reading, and inspection techniques. Proficiency with Fanuc, Haas, Okuma, or similar controls/equipment. Experience machining hard or exotic metals (a plus). A passion for craftsmanship, precision, and teamwork. What You'll Do As a Precision CNC Machinist, you'll set up and operate advanced CNC equipment (including 3-, 4-, and 5-axis machines) to produce high-tolerance parts in refractory metals such as tungsten and molybdenum. You'll work from complex blueprints, collaborate with engineers, and ensure every component meets exacting standards for performance and safety. Key Responsibilities Set up, operate, and troubleshoot CNC equipment including, mills, lathes (3-, 4-, and 5-axis), EDM's, and recently acquired fully automated integrated cells. Produce precision components according to specifications and drawings. Participate in the select of tools, speeds, and feeds for exotic materials. Verify part conformance using precision measuring instruments (micrometers, calipers, CMMs). Perform first-article and in-process inspections, complete quality documentation. Maintain clean, organized, and safe work areas. Support continuous improvement and share your craft knowledge with others. About Elmet Technologies Headquartered in Lewiston, Maine, with additional operations in Euclid, Ohio, and Coldwater, Michigan, Elmet is a global leader in refractory metal manufacturing. We are the only fully integrated U.S. producer of molybdenum and tungsten materials from powder to finished part. Our products power aerospace, defense, semiconductor, and medical industries. For nearly a century, we've built our reputation on craftsmanship, integrity, and American-made excellence. Join us and build your future with a team that's building the future of manufacturing. Ready to Build Something That Lasts? Apply today and take the next step in your machining career with Elmet Technologies. Veteran/Disabled NO PHONE CALLS OR RECRUITERS, PLEASE Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, ancestry, familial status, age, physical or mental disability, pregnancy, sexual orientation, gender identity, genetic information, veteran status, or any other characteristic protected by law.

Job DescriptionPrecision Machinist (5-Axis CNC Experience Preferred) Build What Matters. Build It Here.Since 1929, Elmet Technologies has been manufacturing world-class components that help power, protect, and connect our nation from defense and aerospace systems to advanced technologies and energy infrastructure. We are proudly Made in America, and we're growing. At Elmet, machinists don't just make parts; they make a difference. You'll work with some of the hardest materials on Earth to create precision components that shape industries and safeguard our future. If you take pride in your craft, precision, and country, this is where you belong.What You'll DoAs a Precision Machinist, you'll set up and operate advanced CNC equipment (including 3-, 4-, and 5-axis machines) to produce high-tolerance parts in refractory metals such as tungsten and molybdenum. You'll work from complex blueprints, collaborate with engineers, and ensure every component meets exacting standards for performance and safety. Key Responsibilities Set up, operate, and troubleshoot CNC equipment including, mills, lathes (3-, 4-, and 5-axis), EDM's, and recently acquired fully automated integrated cells. Produce precision components according to specifications and drawings. Participate in the select of tools, speeds, and feeds for exotic materials. Verify part conformance using precision measuring instruments (micrometers, calipers, CMMs). Perform first-article and in-process inspections; complete quality documentation. Maintain clean, organized, and safe work areas. Support continuous improvement and share your craft knowledge with others. What You Bring 3+ years of CNC machining experience (5-axis experience preferred). Certificate, diploma, or associate degree in Precision Machining, CNC Technology, or related field, or equivalent experience. Strong understanding of GD&T, blueprint reading, and inspection techniques. Proficiency with Fanuc, Haas, Okuma, or similar controls/equipment. Experience machining hard or exotic metals (a plus). A passion for craftsmanship, precision, and teamwork. Why You'll Love Working Here Patriotic Purpose: Every part you make supports American innovation, security, and manufacturing strength. Stability & Growth: Full-time, year-round roles with clear advancement opportunities. Benefits Start Day One: Medical, dental, vision, disability, life insurance, and pension. Kick-Ass Retirement Plan: - 401(k) with 4% company match when you contribute at least 5%. Competitive Pay: $25 - $40/hr based on experience and technical depth. Paid Vacation & Holidays: Because balance matters. Veteran-friendly employer. Working with a business that continues to invest in the future. About Elmet TechnologiesHeadquartered in Lewiston, Maine, with additional operations in Euclid, Ohio, and Coldwater, Michigan, Elmet is a global leader in refractory metal manufacturing. We are the only fully integrated U.S. producer of molybdenum and tungsten materials from powder to finished part. Our products power the aerospace, defense, semiconductor, and medical industries. For nearly a century, we've built our reputation on craftsmanship, integrity, and American-made excellence. Join us and build your future with a team that's building the future of manufacturing. Ready to Build Something That Lasts? Apply today and take the next step in your machining career with Elmet Technologies.Veteran/Disabled NO PHONE CALLS OR RECRUITERS, PLEASE Elmet Technology is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran status, familial status, domestic violence status, or any other status protected by law. Powered by JazzHR RoW42nE9c8

Fiber Materials Inc. | solutions for the most extreme places in the universe FMI's manufacturing facility has been a leading solutions provider of high temperature materials and composites for more than 50 years, serving the Department of Defense and NASA. The focus in Maine is on multidirectional reinforced Carbon/Carbon (C/C) and Ceramic Matrix Composites (CMCs) that enable high-temperature components such as: thermal protection systems, re-entry vehicle nose tips as well as rocket motor throats and nozzles. Our materials are being used on ground-breaking space initiatives such as the Orion Multi-Purpose Crew Vehicle and the heat shield for NASA's Mars 2020 mission, important missile programs, airfoils in commercial and military jet engines, and as lightweight armor for U.S. military ground vehicles. Your role: FMI is seeking a Machinist! As a Machinist, you will service all machining requirements including but not limited to (C/C) Carbon/Carbon products, test specimens, materials, manufacturing tooling and equipment components. Job Responsibilities: Repairs and fabricates metal parts by operating mechanical equipment Assembles parts into sub-units or complete units Uses blueprints and design sketches to ensure the proper dimensions and tolerance levels of the finished product Takes measurements of material and selects appropriate machine for the process Set up and operate vertical mill, horizontal lathe, manual surface grinders, manual band saws Review and interpret engineering drawings and work orders Determine tooling requirements and machining processes to be applied Inspect in-process and completed work product to technical requirements Maintain tooling and machine tool equipment in clean operating condition Produce consistent machining of carbon/carbon product May be asked to handle hazardous waste per hazardous waste procedures Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines Select the appropriate tools, machines, and materials to be used in preparation of machinery work Monitor the feed and speed of machines during the machining process Measure completed units to ensure conformance to drawing requirements using precision instruments Use Optical comparators with accompanying multifunctional digital displays Perform standard data and reporting tasks to support quality and manufacturing reporting Expected to participate in Lean activities and to follow all safety procedures and maintain a safe work environment What we need from you: High school diploma or equivalent and/or 2 year technical degree; preferred 0-2 years of related experience Manufacturing experience required Strong understanding of ASME Y 14.5 Able to read and interpret drawings using geometric dimensioning and tolerances, perform geometric and mathematical calculations in support of machining and inspection requirements, and use basic hand held measuring tools Experience with manually operated equipment Lean / Six Sigma / Continuous Improvement experience; preferred Ability to work with a team and independently when required What you'll get from us: 16 ETO days 12 paid holidays (including Winter Closure!) Medical / Dental / Vision 401k Company Match Tuition Reimbursement $1000 Sign-On Bonus

Job DescriptionDescription: CNC Lathe Machinist II Double E Group is an international market leader in the engineering and manufacturing of web handling, material handling, and converting solutions. Our broad portfolio of products are marketed to the paper, tissue, film and foil converting industries. Position Description The CNC Machinist II would join a team of skilled professionals in our CNC Machining department, working on CNC lathe machines (Okuma), manual machines (Bridgeport and lathe), and on the bandsaw. Ongoing training is a key component of our continuous improvement mission. One must have the knowledge and ability to set-up machine, touch-off tools, edit G-code programs, and be able to read measuring instruments correctly as part of the daily duties. Being able to program new parts in G-code is a plus. We are looking for someone with good lathe experience but also the desire to learn vertical milling (Milltronics) when overloaded with work. The CNC Machinist would be working with other members of the manufacturing team on a regular basis (CNC machining, manual machining, bandsaw operations). Extensive ongoing training is a key component of our continuous improvement mission. Responsibilities • Operate CNC equipment in a low-volume, high-mix environment with multiple set-ups daily. • Setting up and running machines in an efficient and productive manner. • Responsible for part quality by utilizing visual and hand inspection equipment. • Interact directly with leads, engineering, and CNC programmers. • Mount, install, align, and secure tools, attachments, fixtures, and pieces on machines • Proficient use of hand tools and precision measuring instruments. • Stop machines to remove finished pieces or to change tooling, setup, piece placement, according to required machining sequences. • Review program specifications and blueprints to ensure machine set up and operations meet specification for finished piece dimensions. • Cross training on a variety of machines. • May be requested to train new employees or employees designated to be cross trained • Other duties, as assigned. Requirements: Requirements • Understanding of CNC programming in G-code and Mastercam. • Math skills, including the ability to add, subtract, multiply and divide. • Ability to read and comprehend instructions. • Must be physically able to handle heavy items including lifting, pushing, pulling, and positioning components up to 50 lbs. • Excellent communication skills required to interact directly with Management, Engineering & Programming to collaborate on process improvements. • Must be able to consistently stand for an entire 8-hour shift. • Ability to work in a team environment • Familiarity with lean and continuous improvement • Knowledge of inspection equipment, such as micrometers, verniers, height gauges etc. • Reliability Education and Experience • Minimum of 7 years' experience in a machine shop, Knowledge of basic machining practices and materials is a plus • General mechanical knowledge/aptitude.

ABOUT LGC STANDARDS: LGC Standards is a division of LGC Group, the UK's designated National Measurement Institute for chemical and bioanalytical measurements. We are a leading global manufacturer and service provider of quality assurance and research tools, supporting analytical needs in more than 120 countries worldwide. We use our expertise to produce to the highest standards, including ranges produced under ISO/IEC 17025 and accredited to ISO 17034. Our wide range of reference materials and proficiency testing schemes is complemented by our experience in outsourcing and customs, enabling us to adapt quickly to provide tailored solutions that meet our customers' analytical needs. We innovate and apply science in order to ensure the safety and integrity of products and services, in line with our vision of science for a safer world. Job Description Job Profile The CNC Machinist serves as a Subject Matter Expert in metal alloy production, responsible for programming, machining, and packaging finished products. Follows work instructions to complete shop orders on time while ensuring quality and accuracy. Key Responsibilities Operate and program CNC and manual equipment (Lathe, Mill, Saw, Laser Engraver) to produce quality parts efficiently. Follow safety policies and maintain a clean, organized work area; report incidents promptly. Use ERP (IFS) system for inventory management, labor entry, and workflow adjustments. Support inventory control, including auditing and reordering supplies. Perform equipment maintenance, repairs, and hazardous waste coordination duties. Assist in New Product Development (NPD) and document procedures aligned with LGC's Quality System. Complete special projects and exemplify company core values daily. Qualifications Associates degree with exposure to science (e.g. chemistry or biology); or related experience and/or training; or equivalent combination of education and experience strongly preferred. Demonstrated ability in a machinist role, or an Associate's/Certificate from an accredited school. 2+ years CNC Lathe programming and machining experience required. Microsoft Office skills and ERP system familiarity required. Proficient in math. Strong attention to detail, accuracy and safety. Competencies Proficient in taking precision measurements and identifying metal alloys by physical characteristics. Skilled in maintaining orientation of cast metal parts throughout the manufacturing process. Experience operating CNC Lathes and Mills; machining various alloys preferred (e.g., Nickel, Magnesium, Zinc, Cast Iron). Strong computer skills, including CNC programming and use of Microsoft Office (Word, Excel). Excellent communication, attention to detail, and problem-solving abilities. Self-motivated with a practical, hands-on approach to challenges. Additional Information What We Can Offer You: LGC recognizes benefits are key resources as you navigate your well-being journey. We're pleased to offer comprehensive programs that are focused on supporting our employees and families' well-being. Many of our benefit programs are effective the 1st of the month following hire date. 401K matching for US Employees. Paid Holidays, which include floating days and a holiday shutdown in December. Comprehensive Benefits Package. Professional development and extended growth opportunities across the CDN, TRC and LGC networks. Corporate Discount Program. ABOUT LGC: LGC is a leading, global life science tools company, providing mission-critical components and solutions into high-growth application areas across the human healthcare and applied market segments. Its high-quality product portfolio is comprised of mission-critical tools for genomic analysis and for quality assurance applications, which are typically embedded and recurring within our customers' products and workflows and are valued for their performance, quality, and range. OUR VALUES PASSION CURIOSITY INTEGRITY BRILLIANCE RESPECT EQUAL OPPORTUNITIES LGC strongly believes that every job applicant and employee should be valued for their individual talents regardless of age, disability, race, color, ethnic or national origin, sex, sexual orientation, gender reassignment, marital or civil partnership, pregnancy or maternity, religion, or belief. Short listing, interviewing and selection will always be carried out without regard to gender, sexual orientation, marital status, color, race, nationality, ethnic or national origins, religion or belief, age, or trade union membership. For more information about LGC, please visit our website **************** #scienceforasaferworld

Manufactures detailed parts and tools from blueprints, sketches, drawings, or verbal instructions using various computer- or mechanically controlled machine tools and equipment. Sets up and operates mills, lathes, computer-controlled equipment (CNC) machine tools, grinders, and other machine equipment using mathematical and geometrical calculations. Uses precision measuring instruments to check and maintain tolerances. Calculates dimensions using measuring instruments. Installs, aligns, secures, and adjusts cutting tools and work pieces. Monitors the feed and speed of machines. Measures and examines completed products for defects. Deburrs all surfaces of parts or products to ensure that they conform to specifications. May also perform complex and varied machining operations in prototype experimental activities. Assists engineers in design, development, and evaluation of new products and recommends product improvements or manufacturing modifications. Typically sets up medium-complexity, unproven parts. May also be responsible for setting up medium to high proven parts. Essential Duties and Responsibilities include, but are not limited to: • Set up, operate, and maintain CNC milling and turning centers according to complex blueprints and specifications. • Retrieve job related information (job routings, part drawing, tool lists, work-instructions, etc.) • Select and utilize appropriate cutting tools and work holding for various materials and machining processes. • Document manufactured quantities and all required processes utilizing ERP system • Perform precise measurements and inspections to ensure parts meet stringent quality control standards. • Participate in continuous improvement initiatives to optimize machining efficiency. • Maintain a clean and safe work environment, adhering to all safety protocols. • May assist with developing new machining methods and tooling for complex parts. • Other duties assigned. Qualifications: Experience and Education: 6-8 years of relevant experience High school degree or equivalent, plus advanced training Technical Skills: Excellent attention to detail Working knowledge of customer specifications and requirements Basic computer skills Problem solving abilities Ability to use calipers, micrometers, etc. Mastery of basic math (addition, subtraction, multiplication, division, and fractions) Strong teamwork and communication skills to get along with co-workers and be a team player Understand and obey safety requirements Commitment to keep work area clean and free of debris Physical Requirements: Must be able to lift and/or move up to 50lbs Specific vision abilities include close and distance vision, depth perception and ability to adjust focus Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time o Capable of standing for long periods Supervisory Responsibilities: None. Travel Required: N/A

WHO WE ARE: At Harvey Performance Company, we're more than a team; we're a community. Our thriving, dynamic, and rapidly expanding organization values community, celebrates success, and fosters personal and professional growth opportunities. THE OPPORTUNITY: Our CNC Machinists handle both the setup and operation of our state-of-the-art CNC equipment, producing some of the highest-quality cutting tools in the industry. We're hiring for our 3-day weekend shift - a full-time schedule that runs Friday through Sunday, offering more days off during the week without sacrificing pay. Our newly built facility is located in Gorham, ME, less than twenty minutes from Portland. The area offers easy access to the outdoors, safe neighborhoods, and excellent schools from K-12 through college. IN THIS ROLE, YOU WILL: Create, setup, and maintain operation of a variety of CNC tool and cutter grinders in a high-volume production environment, while working with our state-of-the-art Walters and Rollomatic machines. Assist manufacturing engineering in continuous improvement practices. Perform first piece and in-process inspection during manufacturing. Troubleshoot new product manufacturing processes and methodologies. YOU'LL BRING: A desire to succeed in a fast-paced, growing company. Associates degree in Machine Tool Technology or relevant industry experience. Ability to follow engineering documents such as: Product drawing Process sheets Standard Operating Procedures Strong attention to detail and deadlines. Willingness to be cross-trained and work with all departments to get things done. WHERE YOU'LL WORK: Our state-of-the-art facility is located in the charming town of Gorham, ME, known for its natural beauty and friendly community. Being part of Harvey means you can experience the fulfilling professional life and the leisurely small-town living that Gorham offers. WHAT HARVEY PROVIDES: A fun, rapid-growing environment where new opportunities are regularly made available.. Newly built 79,000 Sq Ft. state of the art manufacturing facility offering the opportunity to work with Rollomatic and Walter machines. Opportunities for training and development, including tuition reimbursement. A comprehensive benefits package, including PTO, paid holidays, health, dental, vision insurance, employee equity program, and a 401k match program, along with profit sharing. Generous Shift Differential for Second and Weekend Shifts. Exceptional Employee Referral Program. Relocation Assistance provided for candidates who are not local to the area. Opportunities for tuition reimbursement and a robust tiered training program - no experience required, earn while you learn! Starting pay with 2nd shift differential begins at $27.60 per hour, with even higher wages for experienced candidates!

Microwave Techniques Components Division, located in Gorham, Maine is a global leader in the design and manufacturing of high-power industrial microwave systems and RF technology. Our employees create and deliver state-of-the-art microwave systems, microwave generators, and RF circulators for Scientific, Food Processing, Semiconductor, Plasma, Industrial Heating and Industrial Drying applications. For over 40 years, we've supported the microwave industry by pioneering new technology and solutions for our clients across a range of demanding applications. We are looking to add a Manual Machinist to our team. We will train the right candidate with a curious mind, mechanically inclined, enjoy working with their hands and mind. If these attributes describe you, we would like to speak with you! Essential Functions: • Set up of equipment to produce machined parts, including tooling, prototypes, and production ready parts. • Machining of materials using manual lathes, drill presses, vertical and horizontal band saws, Proto Trak CNC Milling Machines as well as various hand tools. • Read and interpret engineering drawings and machining notes to determinate dimensions, tolerances, finish type, sequence of operations, set up, etc. • Selection of tools appropriate for specific jobs/products. • Clean and maintain manual machines. • Team oriented, communication driven, succeeds in the details and dependable. Experience and Requirements: • Willing to learn on the job, with a tenured manual machinist. • Good organizational, planning and documentation skills, detail focused. • Ability to read and understand engineering drawings, dimensions, tolerances, and surface finishes. • Ability to work in a fast-paced deadline driven production environment. • Ability to perform mathematical calculations including converting fractions to decimal. • Previous experience helpful but not necessary, in the use of calipers, micrometers and visual comparators, height gauges to evaluate drawing dimensions. • Must be able to follow both oral and written instruction. • Experience in woodworking are transferable skills. • Willingness to work as part of a team Willing to train the right candidate with mechanical experience. What can you expect from us? • A comprehensive employee benefits package, including health, dental, and vision insurance, life, supplement life, short- and long-term disability insurance, AD&D critical illness and accident insurance. • 401K plan with an employer match. • Discretionary bonuses. • Paid time off (PTO). • 9 Paid holidays. • Tuition reimbursement & training opportunities. • Employee recognition program. • Employee safety equipment/tool purchase program. Schedule: Monday through Friday 6:00 am - 2:30 pm . Personal protective equipment (PPE) is required and supplied by Microwave Techniques, including a safety shoe and safety glasses reimbursement program. Microwave Techniques is an equal opportunity employer. Applicants will not be discriminated against because of race, color, creed, sex, sexual orientation, gender identity or expression, age, religion, national origin, citizenship status, disability, ancestry, marital status, veteran status, medical condition, victim of domestic violence, or any protected category prohibited by local, state, or federal laws. Consistent with the provisions of the Americans with Disability Act (ADA) and the Maine Human Rights Act, applicants may request accommodations needed to participate in the application process. Salary Description $25-$27

Description: D & G Machine Products, Inc., a Certified ISO 9001 & AS9100D Company with a Main Plant located in Westbrook and a Fabrication Plant located in Gorham, Maine, has been offering full-service Precision Machining, Fabrication, Painted and Assembled Machine Products for more than 50 Years. D&G Machine supplies several Nationwide Industries that include: Aerospace, Computer Chip Production, Defense Contracts, Medical, Power Generation, and Maine's Paper Industry. D&G Machine employees have the opportunity to advance within the company after receiving valuable experience, as proven with a majority of our engineers and managers being promoted from the shop floor. JOB SUMMARY: The Manual Machinist is responsible for performing precision machining operations to produce high quality parts by setting up and operating manual, milling, and turning machines. The Manual Machinist troubleshoots, diagnoses, and makes mechanical adjustments and repairs as needed and inspects products to blueprint specifications. SUPERVISORY RESPONSIBILITIES: None ESSENTIAL JOB FUNCTIONS: Plans machining by studying work orders, blueprints, engineering plans, materials, and specifications. Determines the fixtures, attachments, and tools necessary to complete jobs according to specifications and mount them to machine prior to beginning cutting. Sets-up and operates mills and lathes. Verifies incoming work orders for correct material. Maintains specifications by observing machines operations; taking measurements; detecting malfunctions; troubleshooting processes; adhering to quality assurance procedures and processes. Calculates requirements using basic math, geometry, and trigonometry. Maintains continuity among work shifts by documenting and communicating actions. Recognizes improper machine functioning and defects in machinery, measuring instruments or equipment and immediately addresses the problem. Maintains equipment by completing preventive maintenance requirements. Uses a wide variety of precision measuring instruments; maintains accurate dimensional tolerances based upon drawings. Maintains safe operation by adhering to safety procedures and protocols. Documents actions by completing production and quality logs. Functions autonomously and in a team environment. Maintains a clean and safe working area. Requirements: REQUIRED SKILLS/EXPERIENCE/TRAINING: High school diploma or equivalent required. 2-year technical college degree preferred. Minimum 5 years' related machine tool trade experience. Experience with horizontal milling machines. Knowledge of proper use of measuring tools/gauges and cutting tools. Understanding of blueprints and routers. Strong organizational, problem solving, and analytical skills. Ability to work on complex projects with general direction and minimal guidance. Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm. Must pass a post-employment offer drug screen and background check. EEO STATEMENT D & G Machine Products, Inc. is committed to providing equal employment opportunities to all qualified employees and applicants for employment without regard to race, color, creed, national origin, gender, disability, or any other characteristic protected by applicable law. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. A competitive salary and benefits package is offered, including: Medical Insurance Dental Insurance Vision Insurance Supplemental Insurance Short Term Disability (employer paid) Long Term Disability Group Life Insurance (employer paid) 401k with employer match Paid Time Off (PTO) 11 paid Holidays 15% Shift Differential Paid Tuition Reimbursement And much more!

Machinist Level 2 Job Description Full-time Education Level: High School diploma or equivalent required Reports To: Production Manager Job Status: Non-exempt Supervisory Responsibilities: None Description: Howell Laboratories and its divisions: ODAT Machine, and GDL Powder Coating is a 100% employee-owned (ESOP) engineering and manufacturing company based in Bridgton and Gorham, ME. We are committed to providing our knowledge, expertise, and integrity to partners who require solutions on which they can stake their lives and livelihoods. We turn innovation into creation. Our Values: Ownership, Accountability, Integrity, Feedback, Empathy, Openness Position Overview: The Machinist Level 2 sets up previously proven jobs and runs production on various production machines and perform edits as needed. Responsibilities: Sets up repeat jobs on production machines following prints and specifications. Assigned machines may include lathes, grinders, mills, and similar equipment. Chooses, aligns, and securely attaches work holding fixtures, cutting tools, clamps, accessories, and other materials on machines. Applies knowledge of mathematics and instruments to calculate dimensions and tolerances. Ability to utilize various measuring tools including Optical comparator, and mechanical tools such as micrometers etc. Identifies issues or out-of-tolerance conditions; adjusts offsets of machine to correct errors or maintain tolerances as needed. Deburrs and cleans parts as needed. Inspects and measures completed production units to identify defects caused by machine setup and fills out required paperwork. Starts or restarts equipment after power outages or interruptions. Maintains a safe and orderly production area. Performs other related duties as assigned. Competencies and Skills: Candidates applying should possess the following requirements and demonstrate the following competencies to perform the essential functions of the position: High school diploma or equivalent required Certificate in Machine Tool or related Trade preferred but not required. At least one year of experience is preferred Ability to interpret and translate engineering designs, drawings, and documentation Working knowledge of geometric tolerances and how they are applied Working knowledge of Fanuc and Yasnac controls preferred Ability to quickly learn, production equipment Ability to keep a clean and organized work area Physical Requirements: Physical ability to operate machines Prolonged periods of standing, walking, bending, and stretching Must be able to lift up to 50 pounds at times.

We're growing! Apply now and be part of our world-renowned, award-winning team! Shifts to fit your busy lifestyle! Medical, Dental and Vision Insurance with minimal cost to employee! 401k plan with an employer match; 100% vested upon hire! Short Term Disability, Long Term Disability, and Life Insurance at no cost to you! PTO based on experience, plus 10 Paid Holidays! Tuition Assistance so you can grow your career! Precinmac is a leading supplier of mission-critical, precision machined components used in the aerospace and defense, semiconductor, and automation equipment sectors. We specialize in manufacturing uniquely designed high tolerance precision machined components and assemblies, with a focus on continuous improvement, on-time delivery, and the highest possible quality and consistency. We are looking for a CLASS A CNC Machinist (Milling) who has a drive for excellence and precision and experience with 4 axis horizontal mill experience and/or lathe/mill turn experience. Shift Available: Monday-Thursday 3:30PM-2:00AM. You get a 3-day weekend AND a 10% night shift differential! Responsibilities and Duties Produce quality parts on CNC machines such as but not limited to lathes, Mill Turn, 3 Axis Milling, 4 Axis Milling, 5 Axis Milling Load parts, prove tapes, operate controls, set offsets, perform edits, deburr and inspect Study and interpret drawings, manuals, and specifications; determine dimensions and tolerances, perform sequence of operations and setup measurements Interpret inspection data and make adjustments Measure and mark dimensions and reference points for subsequent machining Detect equipment malfunctions or out of tolerance machining and adjust machine, controls, or control media as required to ensure quality of production. Communicate with supervisor, engineers, maintenance, quality and other shop personnel for assignments and to resolve machining or quality issues Keep equipment and work area clean and orderly; perform preventative maintenance on equipment Adhere and comply with state and federal law, the Company AS9100 quality program and procedures, Company policies and safety and environmental regulations May perform other duties as assigned Qualifications and Skills High School Diploma or GED. Technical/Vocational training desired. 2 year degree in Precision Machining, OR minimum of 2 years operating CNC machines such as lathes, milling, and mill turn machines within a controlled Mil-Aerospace or medical parts machining environment Experience machining medium to high complexity work Knowledge of programming language Proficient knowledge and application of precision measuring instruments and the application of such instruments. Instruments should include but not limited to calipers, ID and OD micrometers, depth gages, indicators, and CMM experience Knowledge of reading drawings and specifications with an understanding of geometric tolerance and dimensions Knowledge of tool holders, cutting tools, boring bars, fixtures, inserts and other accessories used on various machines Must be able to follow written and oral instructions Must be able to communicate in English (both oral and written) as it relates to the job Must be adaptable to a changing work environment Must possess math skills to include but not limited to adding, subtracting, multiplication, division, geometry and algebra for the purpose of calculating material fabrication. Willing to run multiple machines independently or in a team environment. BENEFITS Medical, Dental and Vision Insurance with minimal cost to employee 401k plan with an employer match; 100% vested upon hire Short Term Disability, Long Term Disability, and Life Insurance at no cost to employee PTO and 10 Paid Holidays Tuition Assistance For information on Precinmac, including more information on employee benefits and our company culture, visit our website at ***************** We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment in accordance with federal and state regulations.

.

Job Description Job Title: Prototype Lathe Machinist Reports To: Engineering Director About Q, LLC Q, LLC is a New Hampshire-based leader in modern firearms design, engineering, and manufacturing. We innovate fast, prototype relentlessly, and build products that change the industry. As we continue to expand our Engineering team, we are looking for a highly skilled and motivated Prototype Lathe Machinist who thrives in a hands-on, high-precision, fast-paced environment. Position Summary The Prototype Machinist is responsible for CNC lathe prototyping operations-including programming, setup, machining, and inspection of prototype components. This role requires advanced machining knowledge, strong problem-solving ability, and the capacity to work closely with engineers to bring new concepts to life. You will troubleshoot setups, optimize machining processes, and ensure all work meets strict quality requirements. Key Responsibilities • Program, set up, machine, and inspect prototype parts on CNC lathes and ProtoTRAK equipment to support rapid product development. • Develop, edit, and maintain CNC programs using CAD/CAM software (CamWorks, Mastercam, or similar). • Set up and prove out new programs to ensure accuracy, repeatability, and manufacturability. • Select appropriate tooling, cutting parameters, and feeds/speeds for various materials and geometries. • Read and interpret complex engineering drawings, blueprints, and GD&T. • Collaborate with engineers to improve part quality and resolve manufacturability challenges. • Maintain organized documentation including CNC programs, tool lists, and setup sheets. • Assist with fixture design or selection to improve machining efficiency and accuracy. • Conduct first-article inspections and make adjustments to meet design specifications. • Participate in continuous improvement and process optimization efforts. • Move materials as needed and maintain a clean, safe, and organized work area. Required Qualifications • High school diploma or GED required. • 3-5 years of CNC lathe programming, operation, and troubleshooting experience. • Proficient in CAD/CAM software (CamWorks, Mastercam, or equivalent) with strong GD&T comprehension. • Proficient with FANUC CNC controls. • Strong problem-solving and troubleshooting skills. • Ability to work independently and effectively in a fast-paced, team-oriented environment. • High attention to detail with a commitment to quality and precision. • Professional, self-motivated, and adaptable to ongoing change. • Strong focus on safety and maintaining an organized work environment. Preferred Qualifications • Experience with 4- or 5-axis CNC machining. • Experience with DNC software and post-processing tools. • Ability to program for mills and mill-turn equipment. • Familiarity with CMM measurement. Education • High school diploma or equivalent required. • Associate degree or relevant technical certification preferred. Physical Demands & Work Environment This role requires standing for extended periods while operating CNC machinery, along with frequent walking, bending, reaching, and handling of tooling/parts. Ability to lift up to 50 lbs on occasion is required. Work is performed in both office and manufacturing environments with exposure to machine noise, coolants, metal chips, and varying temperatures. PPE is provided and required. Reasonable accommodations may be made for individuals with disabilities. Equal Opportunity Employment Q, LLC is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, gender, sexual orientation, national origin, age, disability, or any other protected status. Background Check A pre-employment background check is required for this position.

CNC Machine Set-up - All Shifts SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision. Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy. Headquartered in Newington, New Hampshire, SIG SAUER has over 3,400 employees across sixteen U.S. locations in three states, and four additional global facilities. SIG SAUER is certified a Great Place to Work. For more information about the company and product line visit: **************** Hiring immediately for CNC Machine Set-up at SIG SAUER. The CNC set-up Operator will operate, change over and set-up CNC machines on low to medium complexity components using automated and manual equipment and processes to meet end customer needs. This Set-Up position that draws on prior machining experience and technical problem-solving skills to operate, change over and set-up a minimum of two (2) types of Primary CNC equipment. Works both independently and in a team environment with internal team members, leads, supervisors, quality CNC Programming and Manufacturing Engineering. Also responsible for communicating with management. Available shifts: * Rochester: (Turning) * 1st: M-F M-F 530a - 145p (5x8) * Newington (SW, Robodrill, Verticals, Makinos) * 2nd: M-TH 5p - 330a (4x10) Job Duties & Responsibilities: * Regular on-site attendance/punctuality is a necessary function of this position. * Operate, change over and set-up a minimum of 2 types of primary CNC equipment within the time allotted by planning/Operator Standard Work. * Complete all operational processes, checklists and procedures as required. * Identify and assemble cutting tools and tool holder assemblies based on existing process documentation. * Prepare all tooling, fixturing and program prove out for the machines. * Pick-up work offsets. Education/Experience & Skills: * High school diploma or general education degree (GED); or related experience and/or training; or equivalent combination of education and experience. * Typically requires a minimum of 6 years of demonstrated CNC experience with a minimum One (1) year as a level III Operator * Must be able to convey ideas and information clearly, concisely, and accurately to others in English, both verbally and in written form. * Must have a professional and respectful attitude. * Capable of adjusting and calculating feeds and speeds and apply knowledge of G and M codes. Why Choose SIG SAUER? Compensation and Financial Benefits: * Competitive Pay PLUS Shift differentials on off shifts * Annual Employee Bonus * 401k from Day 1, employer match at 100% for first 4% contribution, 50% match on next 2% * Short Term/Long Term Disability Insurance * Life Insurance & AD&D Professional Growth and Development: * Career Advancement Opportunities * Comprehensive Training Programs * Tuition Reimbursement * License to access online Training platform Health and Wellness: * Medical, Dental, & Vision Insurance (starts following 30 days of employment) * Vacation Time * Sick Time * Paid Holidays * 3 Floating Holidays * 2 Service/Volunteer Days Employee Perks: * Generous Employee Firearm PURCHASE or GIFT Program * Employee Discounts * FREE UNLIMITED Classes at the SIG SAUER Academy in Epping, NH,50% discount for spouse/partners * Friends & Family Discounts * Annual Prescription Safety Glass Reimbursement * Annual Safety Shoe Reimbursement * Onsite Gym - Corporate HQ * GREAT PLACE TO WORK CERTIFIED EMPLOYER Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law.

is $28.39 - $29.48/hour. This is a mid-level experience position (Grades 4-6) to work in the Machinist Trade. Machinists primarily set-up and operate machine shop equipment including (but not limited to): lathes, radial drills, grinders, presses, punch presses, cut-off saws, milling machines, rolls, sheers, and brakes; some machines are CNC operated. Machinists may be assigned any of the M04 Trade tasks. Required/Preferred Education/Training Preferred: - Technical school or at least 1 year of machine operations. - Knowledge of CNC and G-Code. - High School Diploma or GED. Required: - Knowledge and minimum 1 year experience in a metals fabrication shop. Required/Preferred Experience Preferred: - Waterjet, laser cutting, and break operations. Required: - Must be able to read blueprints in detail. - Must be able to read measuring tools: tape measure, inside and outside micrometers, Vernier or dial calipers, dial indicators, etc. and perform simple math calculations. - Must meet the requirements of the M04 physical task analysis.

Precision Machinist (5-Axis CNC Experience Preferred) Build What Matters. Build It Here.Since 1929, Elmet Technologies has been manufacturing world-class components that help power, protect, and connect our nation from defense and aerospace systems to advanced technologies and energy infrastructure. We are proudly Made in America, and we're growing. At Elmet, machinists don't just make parts; they make a difference. You'll work with some of the hardest materials on Earth to create precision components that shape industries and safeguard our future. If you take pride in your craft, precision, and country, this is where you belong.What You'll DoAs a Precision Machinist, you'll set up and operate advanced CNC equipment (including 3-, 4-, and 5-axis machines) to produce high-tolerance parts in refractory metals such as tungsten and molybdenum. You'll work from complex blueprints, collaborate with engineers, and ensure every component meets exacting standards for performance and safety. Key Responsibilities Set up, operate, and troubleshoot CNC equipment including, mills, lathes (3-, 4-, and 5-axis), EDM's, and recently acquired fully automated integrated cells. Produce precision components according to specifications and drawings. Participate in the select of tools, speeds, and feeds for exotic materials. Verify part conformance using precision measuring instruments (micrometers, calipers, CMMs). Perform first-article and in-process inspections; complete quality documentation. Maintain clean, organized, and safe work areas. Support continuous improvement and share your craft knowledge with others. What You Bring 3+ years of CNC machining experience (5-axis experience preferred). Certificate, diploma, or associate degree in Precision Machining, CNC Technology, or related field, or equivalent experience. Strong understanding of GD&T, blueprint reading, and inspection techniques. Proficiency with Fanuc, Haas, Okuma, or similar controls/equipment. Experience machining hard or exotic metals (a plus). A passion for craftsmanship, precision, and teamwork. Why You'll Love Working Here Patriotic Purpose: Every part you make supports American innovation, security, and manufacturing strength. Stability & Growth: Full-time, year-round roles with clear advancement opportunities. Benefits Start Day One: Medical, dental, vision, disability, life insurance, and pension. Kick-Ass Retirement Plan: - 401(k) with 4% company match when you contribute at least 5%. Competitive Pay: $25 - $40/hr based on experience and technical depth. Paid Vacation & Holidays: Because balance matters. Veteran-friendly employer. Working with a business that continues to invest in the future. About Elmet TechnologiesHeadquartered in Lewiston, Maine, with additional operations in Euclid, Ohio, and Coldwater, Michigan, Elmet is a global leader in refractory metal manufacturing. We are the only fully integrated U.S. producer of molybdenum and tungsten materials from powder to finished part. Our products power the aerospace, defense, semiconductor, and medical industries. For nearly a century, we've built our reputation on craftsmanship, integrity, and American-made excellence. Join us and build your future with a team that's building the future of manufacturing. Ready to Build Something That Lasts? Apply today and take the next step in your machining career with Elmet Technologies.Veteran/Disabled NO PHONE CALLS OR RECRUITERS, PLEASE Elmet Technology is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran status, familial status, domestic violence status, or any other status protected by law.

We're growing! Apply now and be part of our world-renowned, award-winning team! Shifts to fit your busy lifestyle! Medical, Dental and Vision Insurance with minimal cost to employee! 401k plan with an employer match; 100% vested upon hire! Short Term Disability, Long Term Disability, and Life Insurance at no cost to you! PTO based on experience, plus 10 Paid Holidays! Tuition Assistance so you can grow your career! Precinmac is a leading supplier of mission-critical, precision machined components used in the aerospace and defense, semiconductor, and automation equipment sectors. We specialize in manufacturing uniquely designed high tolerance precision machined components and assemblies, with a focus on continuous improvement, on-time delivery, and the highest possible quality and consistency. We are looking for CNC Machinists who have a drive for excellence and precision and experience with 4 axis horizontal mill experience and/or lathe/mill turn experience. Responsibilities and Duties Produce quality parts on CNC machines such as but not limited to lathes, Mill Turn, 3 Axis Milling, 4 Axis Milling, 5 Axis Milling Load parts, prove tapes, operate controls, set offsets, perform edits, deburr and inspect Study and interpret drawings, manuals, and specifications; determine dimensions and tolerances, perform sequence of operations and setup measurements Interpret inspection data and make adjustments Measure and mark dimensions and reference points for subsequent machining Detect equipment malfunctions or out of tolerance machining and adjust machine, controls, or control media as required to ensure quality of production. Communicate with supervisor, engineers, maintenance, quality and other shop personnel for assignments and to resolve machining or quality issues Keep equipment and work area clean and orderly; perform preventative maintenance on equipment Adhere and comply with state and federal law, the Company AS9100 quality program and procedures, Company policies and safety and environmental regulations May perform other duties as assigned Qualifications and Skills High School Diploma or GED. Technical/Vocational training desired. 2 year degree in Precision Machining, OR minimum of 2 years operating CNC machines such as lathes, milling, and mill turn machines within a controlled Mil-Aerospace or medical parts machining environment Experience machining medium to high complexity work Knowledge of programming language Proficient knowledge and application of precision measuring instruments and the application of such instruments. Instruments should include but not limited to calipers, ID and OD micrometers, depth gages, indicators, and CMM experience Knowledge of reading drawings and specifications with an understanding of geometric tolerance and dimensions Knowledge of tool holders, cutting tools, boring bars, fixtures, inserts and other accessories used on various machines Must be able to follow written and oral instructions Must be able to communicate in English (both oral and written) as it relates to the job Must be adaptable to a changing work environment Must possess math skills to include but not limited to adding, subtracting, multiplication, division, geometry and algebra for the purpose of calculating material fabrication. Willing to run multiple machines independently or in a team environment. BENEFITS Medical, Dental and Vision Insurance with minimal cost to employee 401k plan with an employer match; 100% vested upon hire Short Term Disability, Long Term Disability, and Life Insurance at no cost to employee PTO and 10 Paid Holidays Tuition Assistance Shift differentials up to 30%! For information on Precinmac, including more information on employee benefits and our company culture, visit our website at ***************** Precinmac is an equal opportunity, affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.