Machinist jobs in Racine, WI

Summary: Responsible for setting up and operating computer numerically controlled (CNC) machines to produce precision components that meet quality and production requirements. Essential Duties and Responsibilities: Interprets component drawings, studies sample parts, blueprints and engineering information to determine product dimensions and tolerances, sequence of operations and setup requirements to fabricate product. Determines tooling requirements by selecting the appropriate tools, machines, and materials to be used in preparation of machinery work. Selects, aligns and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines; lays out, measures, and marks material for subsequent machining. Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media according to established guidelines and procedures. Starts and observes machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine controls as required. Verifies conformance of finished work-piece to specifications, using measuring and inspection tools as necessary. Effectively operates a variety of other machining equipment including manual machines, Wire EDM and Sinker EDM. Accurately completes production and quality documents. Performs basic machine tool troubleshooting by utilizing and interpreting operator/maintenance manuals; cleans and lubricates machines, tools, and equipment to remove grease, rust, stains, and foreign matter. Maintains a clean and organized work area. Strives to improve productivity, reduce scrap and material waste in an efficient and organized manner. Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs. Performs other production assignments as necessary. Maintains a professional working relationship and effectively communicates with all employees, managers, vendors, customers and regulatory agencies. Understands and complies with company policies and procedures, regulatory requirements and safety regulations. Regular attendance at work is required. Qualifications: Requires a high school diploma or general education degree (GED); prior related production experience and/or training; or equivalent combination of education and experience. NOTE: To Qualify as an Applicant, you must complete our EMPLOYMENT APPLICATION, which is located on the Careers Page on our website, *************************** Please email your completed Application, along with your Resume and any additional supporting documentation, to us at: *************************. Gauthier Biomedical is an Equal Opportunity Employer and a Drug Free Workplace.

**Requisition ID:** 69334 Whirlpool Corporation (NYSE: WHR) is a leading home appliance company, in constant pursuit of improving life at home. As the only major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including _Whirlpool_ , _KitchenAid_ , _JennAir, Maytag_ , _Amana,_ _Brastemp_ , _Consul_ , and _InSinkErator_ . In 2024, the company reported approximately $17 billion in annual sales - close to 90% of which were in the Americas - 44,000 employees, and 40 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com . **This role in summary** This position maintains, troubleshoots and repairs dies, die components, and tooling used in the production process. Manual and CNC equipment and tool room machinery is used regularly. Tool Makers often work in production areas outside of the Tool Room to troubleshoot dies and tooling in presses. Personnel must comply with safety and work rules for the area they are working in, and follow all required safety practices. This is a 2nd or 3rd shift role. A resume must be submitted to be considered for the position **Your responsibilities will include** + Maintain stamping dies of all types, die components and production tooling, and troubleshoot dies in press. + Install and adjust die and tooling components as necessary. + Interpret complex detail and component drawings. + Produce parts to print tolerances. + Maintain production tooling within quality standards. + Communicate effectively with operators, set-up personnel, and supervisors on all three shifts regarding tooling requirements, and die and equipment status. + Complete all required paperwork, quality records, documents, etc. + Setting up machine tools such as drills, lathes, grinders, and milling machines. + Cutting and shaping blocks to specified dimensions. + Filing, grinding, and shimming metals to ensure a smooth finish. + Fitting and assembling tools and die parts. + Inspecting finished dies and tools for defects, smoothness, and contour deformities. + Conducting test runs with completed tools and dies / molds **Minimum requirements** + High School Diploma or GED + Completion of State-indentured Tool & Die Maker apprenticeship or 10 years equivalent experience. + Familiarity with stamping dies of all types + Ability to read and interpret blueprints and technical drawings + Understanding of modern punch press principles **Preferred skills and experiences** + Progressive and/or transfer die knowledge + ProtoTrak or other CNC experience **Why should you apply?** + Base rate of $35 + Up to 120 hours of paid time off (prorated based on start date) + Medical, dental, vision, 401k and other benefits available immediately + Tuition reimbursement + Growth opportunities + Perfect Attendance Bonus + Appliance Discounts Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers (********************************* . Additional information about the company can be found on Facebook (*************************************** , Twitter (********************************* , LinkedIn (************************************************************ , Instagram (**************************************** and YouTube (************************************************* . Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

Title: Manual Machinist - 2nd Shift (4:20 pm - 12:30 am M-F) Location: Cary, IL Hire Type: Contract to Hire Salary: $28-33/hrly Responsibilities: Operate manual tool room equipment Perform custom and repair machining of plant related equipment (builds/rebuilds machinery) Troubleshoot high spped assembly equipment, and produce spare parts for assembly equipment Must be able to read mechanical blueprints Perform calibrations, must be able to machine parts to close tolerances (+/-.0005) using conventional tool room equipment (mill, drill press, chop saw, lathe, surface grinder, push and pull broaches) Cut, shape and fabricate tools Regularly clean and maintain machinery Requirements: HS Diploma/GED Must be able to machine parts to close tolerances (+/-.0005) using convential tool room equipment CNC Mill/Lathe operation and/or set up experience preferred Must have general machinist hand tools (micrometers, calipers, indicator, edge finder, square, scale, wrenches, screwdrivers, toolbox)

Perform a wide variety of duties to diagnose, repair and calibrate machines and equipment to include all mechanical, electrical and electronic components and controls PRINCIPAL RESPONSIBILITIES Diagnose operating problems on all varieties of regular and complicated machines and equipment. Use voltage meters, ohm meters, phase rotation tester, micrometers, torque wrenches, gauge blocks, precision squares, oscilloscope and laser equipment as necessary for diagnostic and repair/alignment purposes. Work from drawings, specifications and schematics. Perform skilled fitting of bearings and spindles and align machine components. May be required to scrape ways. Lay out and machine complicated replacement parts requiring involved machine setups and operations. Perform a wide variety of electrical installation and maintenance work on plant electrical systems, equipment and apparatus. Lay out and install complex wiring circuits and distribution centers in accordance with codes. Diagnose and repair problems with a wide variety of electronic controls requiring knowledge of relay logic, digital logic, ladder drawings and diagrams. Contact outside vendors or service technicians as needed to obtain information regarding problems with machines or controls Perform necessary millwright duties to install and wire new equipment or to remove old equipment. Assist Maintenance Mechanical/Electrical B's as necessary to diagnose the more complicated problems and to decide on remedies. Operate fork lift as required to perform duties. May be required to come in during normal off hours to effect emergency repairs. Follow all lock out/tag out rules and procedures. Maintain area in a clean and orderly manner. Carry out department policies and procedures. Other duties as assigned. EDUCATION Requires a thorough knowledge of mechanical and electrical maintenance duties, knowledge and ability to set up and operate machine tools to produce repair parts and a thorough knowledge of plant equipment, hydraulic and pneumatic circuitry and electronic controls as would generally be acquired in a full apprenticeship training plus four to five years of maintenance experience. SKILLS/EXPERIENCE Ability to read, interpret and follow blueprints, shop routings and specific engineering notes related to unique customer specifications. Have basic math and trigonometry skills. Demonstrated mechanical and electrical knowledge and repair abilities. Certifications in OSHA programs and practices preferred.

Precision Resource is a leading global supplier of precision metal components and assemblies using fineblank technology. Our eight North American divisions serve a global customer base with a commitment to continuous improvement. For over 50 years we have provided solutions to quality, cost and production challenges for market-leading customers in the automotive, heavy duty and off-highway vehicles, tools and hardware, electronics and cutlery. Job Description We have openings on first and second shift do to increased business. Machine tooling components to support tool maintenance and automation requirements. Set up and operate one or more of the following machines: Manual lathe and/or manual mill, grinder, drill press, etc. Duties include machining complex geometries and threading. Work from factory work orders, routings, drawings, process drawings & layout sheets, written or verbal instructions. Apply technical application knowledge in tooling, blue print reading including GDT, and processes for a wide variety of materials. Inspect work produced, including in process inspection, using micrometers, bore gauges, vernier calipers, or other measuring instruments maintaining very close tolerances. Follow preventative maintenance procedures on equipment as prescribed by the supervisor and report operating difficulties of equipment. Train and instruct other employees when requested. Make proper labor and time reports. Participate in continuous improvement teams as required Ensure full implementation of all relevant procedures and instructions and ensure documentation and records are maintained adherent to ISO/TS 16949 Quality Systems Qualifications Requires knowledge equivalent to school education plus ability to read and interpret component prints or drawings Make average to complicated arithmetic calculations and resolve elementary technical problems. 2 year technical degree in machining or equivalent offsetting experience. Able to run manual machines, lathe, mill, surface grinder, drill press, etc. Knowledge of inch & metric systems of measurement. Knowledge and experience using basic measuring tools (micrometer, caliper, toolmaker's scope). Must be able to manage multiple priorities and easily adapt to changing situations. Additional Information

is eligible for a $2500 sign-on bonus About us: For over three decades, Cirtec Medical has been a leading provider of manufacturing solutions for complex Class II and III medical devices. We specialize in providing comprehensive services from design and development to manufacturing and finished device assembly. Our expertise spans active implants and neuromodulation, interventional cardiology, structural heart, minimally invasive surgical systems, smart orthopedics, and precision components. Our dedicated teams prioritize growth, innovation, and collaboration. We actively seek opportunities for improvement to enhance our support for clients. If you embrace a growth mindset and thrive on challenge, you may be a perfect fit for our team! Position Summary: The Sr Swiss Machinist position is primarily responsible to meet production and quality goals and objectives. Provide complete, timely, and informative communication between other shifts. Ensure that Production Control schedule is followed and contribute to all teams reaching monthly sales and quality goals. Must understand the job requirements of the team manager and be able to maintain the department in their absence. Key Responsibilities: * Accurately completes all department paperwork including job travelers, Inspection documentation, work packet information, and tooling request forms. * Excellent working knowledge of blueprints and geometric tolerance to run quality parts. * Ability to program using PartMaker, & Gibbs Cam * Has the ability to set up and run all jobs and machines within the Swiss department. * Strives to increase production and streamline set-ups for optimum efficiencies and quality. * Troubleshoots quality problems by effectively utilizing process control and corrective actions. * May spend up to 70% of time on a machine and 30% in Lead platform when required. * Provides leadership to the teams on all shifts when needed and interrelates well with all areas of the Company. * Effectively resolves all problems that arise or seeks assistance in a timely manner. * Understands company policies and procedures and ensures the team follows them. * Assists in maintaining schedules of machines to best meet customer requirements. * Demonstrates responsibility for company efficiency, quality, pre-production planning, process control, corrective actions, cleanliness, and safety, and continually strives for process improvements. * Continually mentors co-workers to encourage individual growth within company. * Complies with company, quality, and safety standards, policies, and procedures. * Other duties as assigned. This is not a remote position. An individual in this position must be able to successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Must Have: * 5 years practical experience preferred of being a senior member on the team providing mentorship and guidance to other team members * High School diploma or GED required. * 5-7 years experience with set ups and troubleshooting for Swiss CNC machines. * Mechanical medical machining background preferred. * Team membership and leader training preferred. * Comprehensive background of ISO requirements. * Must have extensive knowledge of all phases of machining and equipment. * Must demonstrate good decision making and problem solving. * Must have strong communication skills and work well with people. * Strong blueprint reading skills. * Strong problem-solving skills. * Must be able to read, write and speak fluent English. Cirtec Medical Corporation considers everyone for employment and hires qualified candidates without regard to age, race, religion, color, sex, sexual orientation, gender identity, national origin, ancestry, protected veteran or disability status or any factor prohibited by law. Cirtec Medical Corporation and all its related companies fully endorse equal opportunity. Cirtec Medical provides reasonable accommodation for qualified individuals with disabilities and disabled veterans in the job application process. We work to create a culture that is built on innovation, respect, transparency and communication, and hope you take pride in being a member of our team. It is Cirtecs goal to create an enjoyable work environment and to keep the company a great place to work. We offer a wide range of benefits, resources, and competitive compensation plans designed to support you at every stage of your career and life. Our benefits include training and career development, healthcare and well-being programs including medical, dental, vision, wellness and occupational health programs, Paid Time Off and 401(k) retirement savings with a company match.

Job DescriptionJoin a Team That Builds What Matters Our client, based in Fort Wayne, IN, is a rapidly growing leader in CNC precision machining, design engineering, and custom fabrication. From unique prototypes to high-volume production, they partner on exciting projects across industries including aerospace, automotive, healthcare, and defense. If you're looking to join a team that values craftsmanship, innovation, and reliability, this is an excellent opportunity to grow your skills and make a meaningful impact.Key Responsibilities: Machine Operation: Operate CNC machines, lathes, milling machines, grinders, and other machinery to fabricate metal parts or products. Set-Up: Set up machines according to job specifications, including selecting the appropriate tools, loading materials, and adjusting machine settings. Quality Control: Inspect finished parts to ensure they meet quality standards and specifications. Adjust machine settings as necessary to maintain accuracy and precision. Maintenance: Perform routine maintenance tasks on machinery, including cleaning, lubricating, and replacing worn parts to ensure optimal performance and longevity. Safety Compliance: Adhere to all safety protocols and guidelines while operating machinery and handling materials. Report any safety hazards or concerns to management immediately. Collaboration: Work closely with management and staff to prioritize tasks, troubleshoot issues, and optimize production processes. Documentation: Maintain accurate records of production activities, including job setups, machine maintenance, and quality inspections. Continuous Improvement: Identify opportunities for process improvement and efficiency gains, and propose solutions to management for implementation. Training: Train on quote creation and reading, machine programming and operation, safety procedures, and quality standards as needed. Compliance: Ensure compliance with company policies, procedures, and regulatory requirements at all times. Qualifications: Education: High school diploma or equivalent. Vocational training or certification in machining or a related field is preferred. Experience: Previous experience operating CNC machines and other metalworking equipment is highly desirable. Familiarity with blueprints, schematics, and precision measurement tools is advantageous. Skills: Proficiency in operating CNC machines, lathes, and related metalworking equipment. Strong mechanical aptitude and troubleshooting skills. Attention to detail and commitment to producing high-quality work. Ability to interpret engineering drawings and specifications. Good communication and teamwork abilities. Basic computer skills for machine programming and data entry. Physical Requirements: Ability to stand for extended periods, lift heavy objects, and perform repetitive tasks. Safety Consciousness: Commitment to maintaining a safe work environment and adhering to safety protocols at all times.

Set-up, check routine programs, operate and adjust automatic or semi-automatic numerically controlled machine tools and/or CNC machining equipment to perform standard or repetitive sequences of operations to meet close tolerance and finish requirements Recognize tool and fixture applications and proven program format Follow detailed part drawings and specifications regarding applications, coding, arrangements and settings Note and report variations from specifications Under supervision, assist with prove-out of program tapes for new work or critical variations Recommend tooling arrangements, fixtures, operation sequence, etc. Make setups for and instruct Machine Operators of lower classification for previous programs Use a variety of precision measuring instruments POSITION REQUIREMENTS: High school diploma or equivalency and three to five years-experience in a manufacturing environment or an equivalent combination of education and experience. Set-up experience required Ability to read blueprints. Strong knowledge of machining practices. Good understanding of tooling and grades. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to sit; use hands to finger, feel or handle objects, tools or controls; and reach with hands or arms. The employee is occasionally required to stand and walk; climb or balance; and stoop, kneel, crouch and crawl. Must be able to walk or stand on concrete for up to 4 hours at a time. Must be able to lift 50 pounds without assistance. • Specific vision abilities required by this job include close and distance vision; color vision; peripheral vision; depth perception and the ability to focus.

Woodward is committed to creating a great workplace for all team members. Our company and its members are committed to acting with integrity, being respectful and accountable to one another, and staying humble and driven, while maintaining the highest professional and ethical standards. We are steadfastly committed to attracting the best talent across our communities creating a rewarding workplace. Together we are fulfilling our purpose to design and deliver energy control solutions our partners count on to power a clean future. Woodward supports our members' wellbeing and regularly benchmarks with other companies in our industry to offer an extensive Total Reward package for this position. Salary will be determined by the applicant's education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Estimated annual base pay: Machinist I - $16.49 - $28.60 2nd Shift Hours: 2:30 pm - 11:30 pm Monday-Friday 10% shift differential plus overtime All members included in cash bonus opportunity 401(k) match (4.5%) Annual Woodward stock contribution (5%) Tuition reimbursement and Training/Professional Development opportunities for all members 12 paid holidays, including floating holidays Industry leading medical, dental, and vision Insurance upon date of hire Vacation / Sick Time / Vacation Buy-up / Short Term Disability / Bereavement leave Paid parental leave Adoption Assistance Employee Assistance Program, including mental health benefits Member Life & AD&D / Long Term Disability / Member Optional Life Member referral bonus Spouse / Child Optional Life / Optional AD&D / Healthcare and Dependent Care Flexible Spending Voluntary benefits, including: Home / Auto Insurance discounts Whole Life Insurance / Critical Illness Insurance / Legal Assistance / Military Leave Are you ready to make your mark? If you're a Machinist, we have an exciting opportunity for you. What you will be doing Physical Activity: Moderate physical activity requiring agility and dexterity, including walking, standing, or bending; and lifting or moving objects. Work is performed in an area with moderate risk or discomfort that may require special safety precautions, such as wearing protective clothing or gear. May be required to pass Near Vision and/or Color Vision examinations. Assist in the set up, and operate one or more of the following machines: Manual Mills Manual Lathes Complete paperwork while adhering to record retention requirements. Document nonconforming material according to procedures, participate in activities to implement root cause and corrective actions identified. Utilize work instructions, set-up sheets and method documents to correctly operate machines and inspect machined parts. Utilize various gauging equipment to ensure conformance to the engineering specifications and standards through the production run. Obtain certifications as necessary for required processes. What We Are Looking For Machinist I: High school diploma or equivalent required 0-2 years' experience in related work or applicable degree General knowledge of machines and equipment functionality, and how tools could be used on such equipment/machines. This includes the ability to learn new systems quickly, understanding how parts relate, and how they impact system functionality. Ability to operate and set up CNC equipment Knowledge of machining including the ability to read, understand, edit basic programs and/or basic knowledge of one or more of the following skills - grinding, turning, milling, drilling. This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). All applicants must be U.S. Persons within the meaning of the ITAR and EAR, or eligible to obtain all required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce. The ITAR defines a U.S. Person as a U.S. citizen or national, lawful permanent resident (i.e., 'Green Card holder'), or a protected person (e.g., asylee, or refugee). Woodward is an equal opportunity employer and does not discriminate in hiring or employment on the basis of race, color, religion, sex (including sexual orientation and gender identity), national origin, age, disability, protected veteran status, or any other category protected under federal, state, or local laws.

The CNC Lathe Operator is responsible for the manufacture of parts per plant specifications in an accurate and timely manner. Essential Duties and Responsibilities This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. 1. Set up; edit and operate CNC lathes. 2. Inspect completed parts to ensure conformance to specifications. 3. Cleans work area. 4. Remove tooling, fixturing, and return inspection equipment to proper area. 5. Minor machine maintenance (i.e. greasing, oiling, etc.) Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Basic Qualifications Must be proficient using hand measuring instruments (micrometers, calipers, height gages, optical comparator, etc.). Must be able to read and understand blueprints, specifications and routings Ability to operate, adjust offsets; setup experience preferred, but not necessary Ability to edit programs, fanuc controls, G code and M code programming Requires mathematical skills that require the ability to add, subtract, multiply, and divide. Must perform metric conversions. Requires good oral and written communication skills in order to interact with employees. Ability to true in jaws Possess a good mechanical aptitude and/or prior machinist experience a plus Preferred Skills and Experience Ability to work in a fast-paced environment. Ability to communicate with all levels of the organization. Ability to multi-task, establish priorities, set aggressive goals and achieve them. Must be open to work overtime, as necessary. 2 axis or 4 axis/live tooling Ability to adjust taper on the OD/ID/face Experience with tail stock and steady rests Able to check pin size over threads Knowledge of bore gages Able to add extra passes to OD/bore/face if necessary Experience on Mori Seiki, Daewoo, Danichi, Doosan Puma machines a plus Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The phrases occasionally, regularly, and frequently correspond to the following definitions: Occasionally means up to 1/3 of working time, regularly means between 1/3 and 2/3 of working time, and frequently means 2/3 and more working time). While performing the duties and responsibilities of this position, the employee is occasionally required to walk, use foot/feet to operate machine, reach above shoulders and move from place to place. The incumbent will regularly stand, sit and talk and listen and will frequently use hands to finger, handle or touch. Specific vision requirements for this position include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. During the performance of his/her work duties, the incumbent will be required to occasionally lift up to 50 pounds, and will frequently lift up to 25 pounds such as moving parts from material storage and moving parts in and out of work area. Competitive wages and benefits Job Type: Full-time 2nd Shift - 2:30 pm - 11:00 pm Monday through Friday PI7fded00bf1bb-31181-38188040

CNC MACHINIST III BENEFITS 15% 2nd Shift Premium Flex Schedule (4 10s) $1,000 90-Day Sign-On Bonus Medical & Vision Insurance Supplemental Insurance Plans Available Dental Insurance (Company paid) STD and Life & AD&D Insurance (Company paid) 401(K) Matching PTO & Unpaid Excused Absences Uniforms (Company paid) Training & Apprenticeship Opportunities Safety Shoe & Glasses Reimbursement Program Gym Membership Reimbursement Program JOB SUMMARY CNC Machinist III is responsible for operating and programming a 5-axis CNC machine tool. This includes setting up and verifying tooling, setting part offsets, and programming computer-aided manufacturing (CAM) software. With little guidance, this person can complete a complex part from start to finish. ESSENTIAL DUTIES AND RESPONSIBILITIES Performs safe operations by adhering to safety procedures and regulations. Observes machine operation to detect malfunctions or out-of-tolerance machining conditions. Operates and maintains machine according to work instructions. Programs toolpaths with CAM software. Operates and programs 5-axis CNC machine tool. Takes precise measurements to verify program accuracy. Monitors and develops speed, feed, depth, and/or angle of cut during machining operations. Maintains clean work area and machine daily. Maintains workflow between shifts by documenting and communicating actions. The above list reflects the general details necessary to describe the principle and essential functions of the position. It shall not be construed as the only duties that may be assigned for the position. An individual in this position must successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. MINIMUM QUALIFICATIONS 5+ years of experience as a CNC Machinist. Previous experience machining various exotic materials and specialty tooling. CAM software experience. GD&T experience. Working knowledge of safety protocols. Has strong attention to detail and is self-motivated. Strong understanding of mathematics. PREFERRED QUALIFICATIONS High school degree or equivalent. Apprenticeship or vocational training. Powermill experience. PHYSICAL AND MENTAL DEMANDS An employee must meet the physical and mental demands described here to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Stand, walk, push, pull, reach overhead, and bend to the floor. Exert 1 to 25 pounds of force 75% of the time. Exert 26 to 50 pounds of force 20% of the time. Exert 50 plus pounds of force 5% of the time. Ability to read machine dial gages, blueprints, precision measuring instruments, and computer screens. Read English and understand sketches, routings, safety rules, operating and maintenance instructions, and procedure manuals. Communicate effectively with employees. WORKING ENVIRONMENT The work environment characteristics described here represent those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Indoor shop-based position. Moderate noise levels from operating machines. Physical hazards from moving equipment and machine parts. Machining fumes, dust, and mist. Skin exposed to oils and cutting fluids. 2nd Shift Compensation details: 35-50 Hourly Wage PIcc9c8604d65e-31181-36080962

Job Description Company History: Fathom is one of the largest digital manufacturing platforms offering on-demand manufacturing in North America. With more than 90 large-platform industrial-grade 3D printing machines and a national footprint with more than 500,000 square feet of manufacturing capacity across 10 facilities, Fathom seamlessly blends in-house capabilities across plastic and metal additive technologies, CNC machining, injection molding & tooling, urethane casting, sheet metal fabrication, and design and engineering. With over 50 years of industry experience, Fathom is at the forefront of the industry 4.0 digital manufacturing revolution serving clients in the technology, defense, aerospace, medical, automotive and IOT sectors. Fathom's extensive certifications include ISO 9001:2015, ISO 9001:2015 Design, ISO 13485:2016, AS9100:2016, NIST 800-171 and ITAR. Key Responsibilities: Lead prototype development and production 5-axis programming Work with engineers on custom projects Program and operate CNC machines for complex parts Program complex parts using provided CAD/CAM software Inspection using manual gauges and instruments Understanding of GD&T and ability to read 2-D drawings Monitor an inspect the part throughout the machining process Observe all company quality and safety procedures Communicates and collaborates with team members in the sharing of information and solving technical issues Participates in Lean manufacturing events Team Lead(Optional):Oversee team of machinist, provide technical direction, and manage projects Qualifications/Requirements: High School Diploma or GED Associate degree in a relevant field or (5+) years of experience Expertise in CNC programming, 5-axis machining Ability to read and interpret complex technical specifications Expertise in working with exotic materials and tight tolerances Strong work ethic and high attention to detail Flexible, ability to work in a fast-pace team environment Able to manage sensitive and sometimes confidential information Great communication skills Team Lead(Optional):Experience mentoring or supervision junior staff, leadership skill, experience managing projects or teams of varying skill level. What we offer: Health Benefits: Medical, dental, and vision coverage. Company paid for Life insurance, short-term and long-term disability insurance. Additional Benefits: Paid time off, Floating Holidays, Volunteer time off, and sick time off (depending on state of employment). 401k Plan Employee Perks: Discounts on products and services. Equal Opportunity Employer/Veterans/Disabled This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

The CNC Lathe Operator is responsible for the manufacture of parts per plant specifications in an accurate and timely manner. Essential Duties and Responsibilities This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. 1. Set up; edit and operate CNC lathes. 2. Inspect completed parts to ensure conformance to specifications. 3. Cleans work area. 4. Remove tooling, fixturing, and return inspection equipment to proper area. 5. Minor machine maintenance (i.e. greasing, oiling, etc.) Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Basic Qualifications Must be proficient using hand measuring instruments (micrometers, calipers, height gages, optical comparator, etc.). Must be able to read and understand blueprints, specifications and routings Ability to operate, adjust offsets; setup experience preferred, but not necessary Ability to edit programs, fanuc controls, G code and M code programming Requires mathematical skills that require the ability to add, subtract, multiply, and divide. Must perform metric conversions. Requires good oral and written communication skills in order to interact with employees. Ability to true in jaws Possess a good mechanical aptitude and/or prior machinist experience a plus Preferred Skills and Experience Ability to work in a fast-paced environment. Ability to communicate with all levels of the organization. Ability to multi-task, establish priorities, set aggressive goals and achieve them. Must be open to work overtime, as necessary. 2 axis or 4 axis/live tooling Ability to adjust taper on the OD/ID/face Experience with tail stock and steady rests Able to check pin size over threads Knowledge of bore gages Able to add extra passes to OD/bore/face if necessary Experience on Mori Seiki, Daewoo, Danichi, Doosan Puma machines a plus Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The phrases occasionally, regularly, and frequently correspond to the following definitions: Occasionally means up to 1/3 of working time, regularly means between 1/3 and 2/3 of working time, and frequently means 2/3 and more working time). While performing the duties and responsibilities of this position, the employee is occasionally required to walk, use foot/feet to operate machine, reach above shoulders and move from place to place. The incumbent will regularly stand, sit and talk and listen and will frequently use hands to finger, handle or touch. Specific vision requirements for this position include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. During the performance of his/her work duties, the incumbent will be required to occasionally lift up to 50 pounds, and will frequently lift up to 25 pounds such as moving parts from material storage and moving parts in and out of work area. Competitive wages and benefits Job Type: Full-time PI65a22cafc5c5-31181-37848125

Job DescriptionDescription: Manual Machinist, Lathe, Mills We are looking for a Manual Machinist to join our team. In this position, you will help us create Rods, Cylinders and other components using a variety of equipment, such as a lathe, drill press, boring bar, and Milling machines. Our ideal candidate has completed a training program through an industry apprenticeship or earned a machinist certificate from a vocational school and has at least 8 years of manufacturing experience. Prior roles as a lathe operator or in another manual machining position is a Must. CNC set up and operation is a plus. Requirements: Machining hydraulic cylinder shafts and components 30-120" long average, holding .001" tolerances, General machining of piece parts, short runs. Using prints or sketches, reverse engineer replacement parts. Basic understating of Hydraulic cylinders required. You will be required to accurately measure parts using Micrometers, Calipers, Dial indicators. Below is a list of job duties performed regularly: Turn down and thread 2" diameter x 48" long Chrome plated rod. Machine and thread a 3.500" -4" Shaft Thread The inside of an 8" bore cylinder Drill & tap 12" bolt circles Bore holes for spherical bearings of all different sizes Machine a rod to 5" square wrench flat.

**Requisition ID:** 68715 Whirlpool Corporation (NYSE: WHR) is a leading kitchen and laundry appliance company, in constant pursuit of improving life at home and inspiring generations with our brands. The company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including Whirlpool, KitchenAid, JennAir, Maytag, Amana, Brastemp, Consul, and InSinkErator. In 2023, the company reported approximately $19 billion in annual sales, 59,000 employees, and 55 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com. **ISE Tool and Die Trainee** **Description of the job:** This position builds the foundation for progression into a Tool and Die Apprenticeship. Under supervision of department lead or Journeyman, this position performs entry level Tool and Die Maker responsibilities, such as learning how to troubleshoot and repair dies, die components, and tooling used in the production process; interpret complex component drawings; produce parts to print tolerances; maintain dies, die components and tooling; install and adjust die and tooling as necessary. Personnel must comply with safety and work rules for the area they are working in, and follow all required safety practices. **What you need to be successful:** + Ability to communicate effectively, both orally and in writing, with co-workers, lead personnel, and supervisors. + Ability to perform basic mathematical calculations with whole numbers and decimals; understand geometric functions and perform basic calculations; and perform trigonometry calculations as needed. + Ability to read and interpret blueprints and technical drawings **Minimum requirements:** + High School Diploma or GED + Understanding of modern punch press principles **Preferred:** + Successful completion of the following: Blueprint Reading (606-111), Applied Math I & II (804-370; 804-371), and Precision Measuring (623-185) classes. **Why You Should Apply:** + Base rate of $20.85 + Up to 120 hours of paid time off (prorated based on start date) + Medical, dental, vision, 401k and other benefits available immediately + Tuition reimbursement + Growth opportunities + Perfect Attendance Bonus + Appliance Discounts Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers (********************************* . Additional information about the company can be found on Facebook (*************************************** , Twitter (********************************* , LinkedIn (************************************************************ , Instagram (**************************************** and YouTube (************************************************* . Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

Precision Resource is a leading global supplier of precision metal components and assemblies using fineblank technology. Our eight North American divisions serve a global customer base with a commitment to continuous improvement. For over 50 years we have provided solutions to quality, cost and production challenges for market-leading customers in the automotive, heavy duty and off-highway vehicles, tools and hardware, electronics and cutlery. Job Description We have openings on first and second shift do to increased business. Machine tooling components to support tool maintenance and automation requirements. Set up and operate one or more of the following machines: Manual lathe and/or manual mill, grinder, drill press, etc. Duties include machining complex geometries and threading. Work from factory work orders, routings, drawings, process drawings & layout sheets, written or verbal instructions. Apply technical application knowledge in tooling, blue print reading including GDT, and processes for a wide variety of materials. Inspect work produced, including in process inspection, using micrometers, bore gauges, vernier calipers, or other measuring instruments maintaining very close tolerances. Follow preventative maintenance procedures on equipment as prescribed by the supervisor and report operating difficulties of equipment. Train and instruct other employees when requested. Make proper labor and time reports. Participate in continuous improvement teams as required Ensure full implementation of all relevant procedures and instructions and ensure documentation and records are maintained adherent to ISO/TS 16949 Quality Systems Qualifications Requires knowledge equivalent to school education plus ability to read and interpret component prints or drawings Make average to complicated arithmetic calculations and resolve elementary technical problems. 2 year technical degree in machining or equivalent offsetting experience. Able to run manual machines, lathe, mill, surface grinder, drill press, etc. Knowledge of inch & metric systems of measurement. Knowledge and experience using basic measuring tools (micrometer, caliper, toolmaker's scope). Must be able to manage multiple priorities and easily adapt to changing situations. Additional Information

Manual Machinist Contract (open ended with potential to go direct) Lincolnshire, IL $30/hr Manual Machinist - Precision, Craftsmanship, and Quality You Can See About the Role We're looking for a skilled Manual Machinist to join our manufacturing team and help us produce high-quality, precision components for industries that demand excellence. This is an opportunity to work with your hands, your head, and your experience-bringing designs to life using traditional machining techniques on lathes, mills, and grinders. What You'll Do Set up and operate manual lathes, Bridgeport mills, and other conventional machine tools to produce precision parts. Read and interpret blueprints, engineering drawings, and job orders. Select appropriate tooling, measure materials, and make adjustments to ensure exact tolerances. Inspect finished parts using calipers, micrometers, and other measuring tools to verify specifications. Maintain machines by performing basic preventive maintenance and keeping a clean, organized work area. Collaborate with engineers and production teams to troubleshoot and improve processes. What We're Looking For 3+ years of experience as a Manual Machinist (or equivalent hands-on machining experience). Proficient in blueprint reading, machining mathematics, and precision measuring instruments. Strong attention to detail and commitment to producing quality work. Ability to work independently and as part of a team in a fast-paced manufacturing environment. Mechanical aptitude and a passion for craftsmanship. Why You'll Love This Role Competitive pay and benefits package. Stable, growing manufacturing company with a reputation for quality and innovation. Work on interesting, varied projects-no two days are the same. Be part of a supportive, skilled team that values your expertise and contributions.

Join a Team That Builds What Matters Our client, based in Fort Wayne, IN, is a rapidly growing leader in CNC precision machining, design engineering, and custom fabrication. From unique prototypes to high-volume production, they partner on exciting projects across industries including aerospace, automotive, healthcare, and defense. If you're looking to join a team that values craftsmanship, innovation, and reliability, this is an excellent opportunity to grow your skills and make a meaningful impact.Key Responsibilities: Machine Operation: Operate CNC machines, lathes, milling machines, grinders, and other machinery to fabricate metal parts or products. Set-Up: Set up machines according to job specifications, including selecting the appropriate tools, loading materials, and adjusting machine settings. Quality Control: Inspect finished parts to ensure they meet quality standards and specifications. Adjust machine settings as necessary to maintain accuracy and precision. Maintenance: Perform routine maintenance tasks on machinery, including cleaning, lubricating, and replacing worn parts to ensure optimal performance and longevity. Safety Compliance: Adhere to all safety protocols and guidelines while operating machinery and handling materials. Report any safety hazards or concerns to management immediately. Collaboration: Work closely with management and staff to prioritize tasks, troubleshoot issues, and optimize production processes. Documentation: Maintain accurate records of production activities, including job setups, machine maintenance, and quality inspections. Continuous Improvement: Identify opportunities for process improvement and efficiency gains, and propose solutions to management for implementation. Training: Train on quote creation and reading, machine programming and operation, safety procedures, and quality standards as needed. Compliance: Ensure compliance with company policies, procedures, and regulatory requirements at all times. Qualifications: Education: High school diploma or equivalent. Vocational training or certification in machining or a related field is preferred. Experience: Previous experience operating CNC machines and other metalworking equipment is highly desirable. Familiarity with blueprints, schematics, and precision measurement tools is advantageous. Skills: Proficiency in operating CNC machines, lathes, and related metalworking equipment. Strong mechanical aptitude and troubleshooting skills. Attention to detail and commitment to producing high-quality work. Ability to interpret engineering drawings and specifications. Good communication and teamwork abilities. Basic computer skills for machine programming and data entry. Physical Requirements: Ability to stand for extended periods, lift heavy objects, and perform repetitive tasks. Safety Consciousness: Commitment to maintaining a safe work environment and adhering to safety protocols at all times.

Set-up, check routine programs, operate and adjust automatic or semi-automatic numerically controlled machine tools and/or CNC machining equipment to perform standard or repetitive sequences of operations to meet close tolerance and finish requirements Recognize tool and fixture applications and proven program format Follow detailed part drawings and specifications regarding applications, coding, arrangements and settings Note and report variations from specifications Under supervision, assist with prove-out of program tapes for new work or critical variations Recommend tooling arrangements, fixtures, operation sequence, etc. Make setups for and instruct Machine Operators of lower classification for previous programs Use a variety of precision measuring instruments