Machinist jobs in Rochester, NY - 107 jobs

Job Description Machinist 2nd Shift (Union Pay and Benefits) Hours: 3:30pm-12:00pm Monday - Friday OT as needed Education: High School Diploma / GED required Requirements: 3-5 years' experience working with machining equipment required, must be able to read blue prints and use standard metrology equipment including mics, calipers, gages etc. Benefits: Union benefits including medical, dental, paid vacation etc. Summary: Set up and operate a variety of machine tools to produce precision parts. Work to tolerances as specified in blue print, drawing, model or other design specification document or file. Methods to achieve final machined part may specify speed, feed, cuts, tooling, and procedure to follow. Perform similar or incidental work of comparable or lower level as required. Perform other miscellaneous duties as assigned. Position Responsibilities: Set up and operate manual and CNC milling machines, drills, lathes, grinders and various other shop equipment Assure all machined parts in-house and incoming are at the highest level of quality and accuracy. Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines. Monitor quality and workmanship. Verify accuracy on prints, verify any revisions on prints. Tool inventory/management Department organization and machine maintenance. Inform supervisor/ Engineer of any questions or problems regarding product/ department error. Participate in minimizing scrap levels. Suggest possible improvements to provide a higher quality product. Support process improvements, communicate thoughts of improvement. Look for any bottlenecks, suggest possible improvements. Be involved in all process Improvements. Other duties as assigned Position Requirements: 3-5 years' experience with CNC and manual milling machines, drills, lathes, grinders and various related items. Ability to read blue prints is required Ability to read measuring devices including mics, calipers, various gages etc. is required Must be able to perform basic troubleshooting Good communication / people skills. Must be highly motivated and able to work independently High school diploma or GED required Participate in producing in high levels of quality at precise tolerances. Mechanical aptitude required

Operate Manual Vertical Mill, lathe, band saws, grinder and drill press for production and prototype work Maintain working condition of equipment, performing periodic preventative maintenance to ensure safety and proper operation of equipment Manufacture and fabrication of busswork necessary for internal production of RF induction heating systems Good mechanical and special aptitude and blue print reading skills Build & repair coils for both new and repair orders Machine parts for production runs and prototype work Incoming mechanical inspection on various out-sourced parts Assist and train employees on equipment, when necessary Authority to generate ECN's and DMR's Authority to stop employees from using machinery when an unsafe condition exists. Manufacture and fabrication of custom induction coil assemblies (primarily copper) . Requirements HS Diploma Machining Certificate or equivalent Minimum 2-4 years' experience Must be able to braze, mold, solder and have good knowledge of plumbing fittings Read and understand schematics, drawings and blueprints Interface with internal customers to fulfill customer orders Must be able to conceive and build mandrels for the manufacture of complex coils CNC programming at the machine Salary Description $21.00-$28.00/hour

Operate Manual Vertical Mill, lathe, band saws, grinder and drill press for production and prototype work Maintain working condition of equipment, performing periodic preventative maintenance to ensure safety and proper operation of equipment Manufacture and fabrication of busswork necessary for internal production of RF induction heating systems Good mechanical and special aptitude and blue print reading skills Build & repair coils for both new and repair orders Machine parts for production runs and prototype work Incoming mechanical inspection on various out-sourced parts Assist and train employees on equipment, when necessary Authority to generate ECN's and DMR's Authority to stop employees from using machinery when an unsafe condition exists. Manufacture and fabrication of custom induction coil assemblies (primarily copper) . Requirements HS Diploma Machining Certificate or equivalent Minimum 2-4 years' experience Must be able to braze, mold, solder and have good knowledge of plumbing fittings Read and understand schematics, drawings and blueprints Interface with internal customers to fulfill customer orders Must be able to conceive and build mandrels for the manufacture of complex coils CNC programming at the machine Salary Description $21.00-$28.00/hour

Discover Your Next Big Opportunity: See Why Quality Vision International Is the Place to Be! See What Jim Had to Say About Our Machine Shop! Schedule: Monday - Friday, 7:30am-4:00pm Compensation: $24.00-$33.00, based on experience The Machinist II-III in QVI's Machine Shop operates manual mills and/or program computer numerically controlled (CNC) milling machine in a low to medium production volume environment. Role and Responsibilities: Operates and programs manual mills or computer numerically controlled ( CNC ) machine in a low to medium production volume environment. To include: · Machine (drill, mill and tap) a wide assortment of sometimes intricate and expensive castings, forgings, weldments and machined parts. · Inspect and verify parts with hand tools (micrometers, caliper) and/or hard gaging; and be accountable for own parts. · Set 3 axis position stops, fixture offsets, select proper feeds, speeds and tools, develop and fabricate basic fixtures. · Perform operator intervened operations that are required by program sequences, utilizing G/M codes. · Program, set-up, run parts, inspect, and make adjustments to produce conforming parts with no supervision. · Maintain a safe and orderly production area. · Complete programming of parts including: set-up, run parts, inspect, and make adjustments to produce conforming parts in an independent manner. (Level III) · Process machine parts completely and independently (start to finish), developing fixtures as needed, set proper feeds and speeds, leave appropriate material for next operation. (Level III) · Maintain a safe and orderly production area in accordance with 6S policies/protocols. (Level III) · Take initiative to identify ways to improve efficiency, without cutting corners. (Level III) · Always ensuring the highest level of quality is achieved, minimum material waste. Goal = Zero defects on every job, parts made to the print. (Level III) · Perform other related duties as assigned by management. Someone who has worked as a CNC machinist or has done CNC machining in this role could be a fit for this position! Requirements · High School Diploma required; Associates degree in related technical discipline preferred. · Journeyman or completion of apprenticeship program preferred. · Must have 5+ years of experience working on vertical and/or horizontal machine tools and/or CNC machining . (Level II) · Must have 10+ years of experience working on vertical and/or horizontal machine tools. (Level III) · CAM certification and/or proficiency preferred. (Level III) · Advance ability to read and interpret complex drawings, with interrelated dimensions and strong understanding of GD&T principles.(Level III) · Proficiency to produce parts of the highest quality with specifications of .0002” (3-5um) including bores, parallel, and flatness. (Level III) · Strong math skills, good working knowledge of SPC a plus · Ability to read and interpret drawings, sometimes of a complex nature with interrelated dimensions. · Proficiency to produce parts of good quality with specifications of .0004”-.0008” including bores, parallel, and flatness. (Level II) · Solid understanding of cutting tools, endmills, drill, and reamers. · Ability to perform tool offsets for length and diameter, with a willingness to further training. · Strong communication skills and fluent in machine shop terminology/concepts. Physical and/or Environmental Requirements: · Ability to independently lift and carry items weighing up to 30 lbs., occasional lifting to 70 lbs. · Ability for frequent, firm, and steady hand grip with tools requiring torque to tighten machine parts, tooling, and fixtures. · Ability to stand, walk, and/sit for extended periods of time. · Ability and willingness to wear any required Personal Protective Equipment, which may include Safety glasses, ear plugs, safety shoes, head protection, etc. What We Offer Paid Time Off · 10 paid holidays each year · Over 3 weeks of PTO (vacation/sick/personal) to start, with additional time after 5 and 10 years Health & Financial Benefits · Health coverage where QVI pays 97-100% of premiums on our most affordable HDHP - free single coverage for employees! · Employer-paid Short-Term & Long-Term Disability Insurance · Employer-paid Life Insurance · QVI 401k Retirement Savings Plan: Up to 5% gross wages · Tuition Reimbursement: up to $7,000 annually · College Scholarship Programs for employee dependents · Annual discretionary bonuses (for non-commission roles) · $1,500 Employee Referral Bonus Wellness & Extras · Employee Assistance Program (EAP) & Wellness perks: on-site nurse, biometric screenings, chronic condition support, and cash incentives for healthy living programs and challenges · Free on-site electric vehicle charging stations and cash reimbursement toward the purchase of qualified EVs Salary Description $24-$33, based on experience

Description of Job: Able to read and interpret prints and perform independent machining operations to specifications Able to proficiently operate drill press, small mill, and small lathe Able to use micrometers and verniers Polish, hydro, attach name plates and gaskets on sight glasses Lap flush body seat area Lap, polish hydro (as required), package seal seats Able to proficiently operate all of the following machines: large drill presses, large mill, radial drill, engine lathe, turret lathe, hone and NC machine. In addition, must be able to operate one of the following additional machines: horizontal boring mill; vertical boring mill; tracer Performs setups Able to grind and re-sharpen own tools Responsible for Quality, Safety and Housekeeping in their job assignment and follows current SOP's. In the event no candidates meet the minimum requirements for the job, the Company may elect to fill the opening by training under the provisions of Par. 13 of the Agreement. This position will be filled without regard to sex, religion, age, race, color, non-job-related disability or national origin. Only serious candidates should apply. Testing includes: CNC capable, mill/lathe, Fanuc/Mazatrol programming, Reading Comprehension, Advanced Machining Math. Capable of reading machine drawings. Manual lathes & Mills. Able to perform inspections. * Grade level will be assigned based on level of knowledge and experience. Job-(RC): 062-(RC 9), 061-(RC 12), 131-(RC 14), or 064-(RC 16) Apply for this job through ADP (*************************

Under limited supervision, sets up, operates, and adjusts various types of conventional or automatic machines including lathes, drill presses, grinders, and other precision equipment. Works from drawings and written instructions to create replacement and new parts in making repairs to metal parts as well as for experimental apparatus or prototype equipment. Work is typically not routine and normally require analysis to understand JOB DUTIES • Machines parts to specifications, using machine tools such as lathes, milling machines, shapers or grinders. Sets up, adjusts or operates basic or specialized machine tools used to perform precision machining operations. • Measures, examines or tests completed units to check for defects and ensure conformance to specifications, using precision instruments, such as micrometers. Calculates dimensions or tolerances, using instruments such as micrometers or Vernier calipers. • Monitors the feed and speed of machines during the machining process. Maintains machine tools in proper operational condition. Operates equipment to verify operationalefficiency. • Studies sample parts, blueprints, drawings or engineering information to determine methods or sequences of operations needed to fabricate products. • Programs computers or electronic instruments, such as numerically controlled machine tools. Diagnoses machine tool malfunctions to determine need for adjustments or repairs. • Lays out, measures and marks metal stock to display placement of cuts. Fits and assembles parts to make or repair machine tools. Sets up or operates metalworking, brazing, heat-treating, welding or cutting equipment. • Installs repaired parts into equipment or install new equipment. Checks work pieces to ensure that they are properly lubricated or cooled. • Designs fixtures, tooling or experimental parts to meet special engineering needs. • Supports metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties and mathematics. Prepare working sketches for the illustration of product appearance. • Tests experimental models under simulated operating conditions for purposes such as development, standardization or feasibility of design. Install experimental parts or assemblies, such as hydraulic systems, electrical wiring, lubricants or batteries into machines or mechanisms. • May assist with low level employees and provide knowledge to troubleshooting needs. • Performs other duties as assigned. EDUCATION & EXPERIENCE Typically requires a high school diploma or GED and five (5) or more years of shop experience or an equivalent combination. KNOWLEDGE, SKILLS, ABILITIES • Knowledge of various metals and measurements used in machining processes required. • Knowledge of machinist, CAD and/or CAM software required. • Knowledge of raw materials, production processes, quality control, costs and other techniques for maximizing the effective manufacture and distribution of goods required. • Knowledge of monitoring gauges, dials or other indicators to make sure a machine is working properly required. • Requires broad knowledge of operational procedures and tools obtained through extensive work experience. • Advanced Milling experience on Acer and Proto Track knee mills • Proficient MIG/TIG welder on both aluminum and stainless steel • Advanced WEDM experience PHYSICAL DEMANDS: Requires manual dexterity, arm-hand steadiness, and multi-limb coordination. Ability to lift 50 pounds or more and stand for extended periods of time. COMPANY INFORMATION: Motion offers an excellent benefits package which includes options for healthcare coverage, 401(k), tuition, reimbursement, vacation, sick, and holiday pay. Please keep in mind that this is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. It also does not consider other components that make up the total rewards package for the position. If you are hired at Motion, your overall compensation will be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. Pay: $29.77 - $38.70 / hour Not the right fit? Let us know you're interested in a future opportunity by joining our Talent Community on jobs.genpt.com or create an account to set up email alerts as new job postings become available that meet your interest! GPC conducts its business without regard to sex, race, creed, color, religion, marital status, national origin, citizenship status, age, pregnancy, sexual orientation, gender identity or expression, genetic information, disability, military status, status as a veteran, or any other protected characteristic. GPC's policy is to recruit, hire, train, promote, assign, transfer and terminate employees based on their own ability, achievement, experience and conduct and other legitimate business reasons.

Job Description About the Job: Operate Davenport multi-spindle screw machines equipped with automatic indexing and feeding mechanism to perform series of machining operations on metal bar stock. Opportunities for growth: Training is provided to further the knowledge of the operator including the use of a variety of tool holders and attachments. Advanced training is also provided for troubleshooting and setting up a Davenport multi-spindle screw machine. Essential Functions & Responsibilities: Operate assigned machine(s) by production foreman. Read blueprint and job order for such information as dimensions, tolerances and number of work pieces to be machined per hour. Verify conformance of machined parts to specifications using a variety of gauges including, micrometers, calipers, dial indicators, comparators, ect. Perform tool changes as required. Adjust machine controls and changes tool settings to keep dimensions with specified tolerances. Clean machine, tooling and parts and removes chips from machine when necessary. Perform minor machine maintenance as required. Interact with Production Leader and Engineering staff to improve productivity and troubleshoot machining problems. Maintain cleanliness of work area utilizing 5S techniques and methods. Minimum Experience: 3 years' operating Davenport multi-spindle screw machine with related factory experience. Other Requirements: Ability to work collaboratively to solve problems relative to area of responsibility. Ability to adhere to safety rules, policy and procedures. Ability to adhere to employee rules, policy and procedures. Gates Albert offers work stable environment, excellent benefits, 401K match and career growth. EOE, including disability/vets. Job Posted by ApplicantPro

Working from given instructions, will load programs into the controller, review the program and do intermediate setup of machine tools through first piece inspection approval. Essential Duties and Responsibilities: Accountable for manufacturing complex parts and machine maintenance. Able to control product quality during production runs using calipers, dial bore gages, micrometers, etc. Measure and work with tight tolerance in accordance with control plan and blueprint. Good working knowledge of proper machine operation and safety. Manufacture product with tight tolerance in accordance with CAD models and blueprints. May work with prototypes for potential future work. Must be able to develop and machine basic fixtures with or without prints. Keeps work area clean and organized. Must be able to change tools and offsets. Additional Responsibilities: When requested, may work on special projects and various related assignments. May be required to edit programs at machine. May be requested to instruct other personnel on the machine operation. May be required to work in various areas of operations when necessary. Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 50 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: Minimum of 5 years experience in a machine shop environment. Knowledgeable on set-ups, lathes and mills. Understand GD&T and shop math. Ability to read and understand cad-cam software. Familiar with G and M codes. Good communication skills. Must be a good team player. This job description in no way states or implies that these are the only duties to be performed by this employee. He/she will be required to follow any other instructions and to perform any other responsible duties as requested by his/her supervisor. Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Job purpose

PEKO Precision Products: WE MAKE PRODUCTS THAT MATTER PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: CNC Machinist (A & B Shift) Your Role: The CNC Machinist is responsible for the set-up and operation of a variety of CNC machines. You will set up, operate, and manufacture products according to blueprint specifications and customer requirements. Reports To: Machining Supervisor What We're Looking For: Previous experience with the setup and operation of CNC Mills or Lathes Ability to read blueprints Knowledge of Geometric Dimensioning and Tolerances (GD&T) Ability to conduct a final inspection of a product to ensure that it is free from defects and ready for the next stage of production. Qualifications: Required High school diploma or GED equivalent 3 plus years experience in a machine shop environment 3 plus years of experience working with vertical mill machines Preferred Associates in precision machining Experience with multi-axis CNC milling with fanuc controls, MAZAK, or similar. Experience in horizontal mill machines Work Authorization: US Persons PEKO Perks: Competitive Total Rewards Tuition Reimbursement (IRS Allowable pre-tax Max) 401K, Medical, Dental, Vision Flexible Spending & Health Savings Accounts Life, Short and Long-Term Disability Recognition Awards & Discretionary Benefits Our Core Values: We care about our talented and loyal PEKO family. We are committed to providing a safe, clean, and positive workplace. We believe in transparency, honesty, and respect for all stakeholders. We are dedicated to maintaining an agile and financially prudent organization. We foster the belief that PEKO people are resilient problem-solvers impacting the future. Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice. For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $17.00-$32.00 per hour with a 10% shift differential. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training.

Job purpose

Operates CNC (Computer Numerically Controlled) lathes or mills or to machine metallic and nonmetallic work pieces to produce precision machined parts to acceptable levels of efficiency and quality on both new and existing production processes. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damage product or damage to machine center. Makes necessary machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity. Requirements Essential Duties and Responsibilities In addition to adhering to the policies of the company outlined in the PGM Employee Handbook, an individual servicing in this capacity shall consistently be able to: Operate CNC mills and/or lathes running new and existing production processes using proper procedures and equipment to establish and ensure consistent and quality parts, optimum perishable tooling usage, and acceptable quality levels. Work with Set-up Operators debugging and developing new production processes and learning st-up skills. Perform routine preventative maintenance, as required. Provide training and instruction as needed to CNC I and CNC II operators in the operation and preventative maintenance of CNC mills and/or lathes and proper usage of required inspection equipment. Monitor and maintain perishable tooling inventory for each assigned job. Establish and perform all required inspection duties to maintain acceptable quality levels. Record Statistical Process Control (SPC) data, as required. Inform supervisor of any problems associated with equipment, processes or procedures trying to explore, develop and recommend continuous improvement ideas. Analyzes blueprint and specifications. Complete job related paperwork accurately and completely, which includes: expedite sheets, move tickets, and job cards. Basic GD&T skills. Basic and Advanced Vantage training. Perform basic repeat set-ups, tear downs and organize perishable tool list - tool list to proper kit location. Verifies spindle, feed rate, depth of cut and tool positions relative to work piece. Follow company policies as outlined in the employee handbook. Other duties may be assigned. Supervisory Responsibilities This position has no supervisory responsibilities. Education, Training and/or Experience High school diploma or general education degree (GED) and/or technical school, associates degree; and three to five years related experience and/or training; or equivalent combination of education and experience. Internal Training Requirements Company Benefits Orientation Bloodborne Pathogen Company Practices & Policies Fire Extinguisher Safety Mission, Vision & Values Training Hazardous Communication Values Based Leadership Lock Out/Tag Out Video Traveler Sign-Off Personal Protection Equipment Right-to-Know Training Salary Description $19 to $25 per hour

Seek candidates with experience in machining with tight tolerance on all types of grinding machinery. Join a highly regarded precision contract manufacturer as a key contributor in producing a wide variety of highly precise short-run and prototype part orders. We have been in business for 30+ years with customers in optical, medical, aerospace, automotive and other advanced industrial fields. Job Description: Hold tolerance of +/- 0.0002 on machined parts Set up surface, cylindrical and jig grinders to machine small lots Read blueprints and/or follow written and verbal work instructions Conduct first off inspection and work with QC to ensure quality ob Benefits: Competitive Pay & Incentive Compensation Health & Dental - High Deductible and Co-pay options Paid Time Off & Holidays 401(k) and 401(k) match Climate controlled/well maintained work environment

About Advanced Atomization Technologies Advanced Atomization Technologies (AA TECH) is a joint venture between Parker Aerospace and GE Aviation, created to produce and support advanced fuel nozzles and related products for current and future commercial engine platforms, including aerospace and aero-derivative engines. The highly skilled and experienced team of AA TECH employees is expert in design, assembly, testing, and aftermarket support, providing our customers with a world-class product and support experience. AA TECH offers a comprehensive and competitive compensation and benefits package, including: Variable Incentive Plan (Bonus Eligibility) Health, Dental, and Vision Insurance with HSA Company Contribution 401k Plan with Employer Match Tuition Reimbursement 12 Paid Holidays Vacation Accrual Position Summary: This position is for a machinist to setup and operate CNC machines. The employee will operate one or more production machines working from blueprints, sketches, and route sheets. Contributes to lean initiatives to increase productivity and reduce costs. Key Responsibilities : Sets up and runs production machines. Performs machine operations (may include reworking parts) such as cutting, shaping, deburring, forming, drilling, and reaming parts, where the materials, tooling, and sequence of operations have been pre-planned and established. Performs operations such as tapping, spot-facing, chamfering, countersinking, and counterboring to close tolerances. Adjusts feeds, speeds, and depth of cut to machine quality parts, per documentation. Accurately and regularly performs all statistical process control (SPC) specific to division requirements. Required Qualifications: High school diploma or equivalent, and/ or completion of Machinist Certificate program preferred 1-3 years related machining experience preferred Has working knowledge of machine shop mathematics, may include trigonometry. CNC and/ or manual machining experience and experience making tool / work offsets. Set-up experience, reading / editing of G/M-code, and experience with a FANUC control a plus. Ability to use measuring equipment (ex: comparator, micrometers, calipers, pin or wire gauges, etc.) Key Competencies: Demonstrates effective verbal and written skills along with the ability to work in a team environment. Observes all company policies and procedures, including safety rules, and maintains a clean and orderly work area. Must demonstrate manual dexterity and a willingness to learn. Effectively demonstrates team member competencies and participates in goal setting, performance feedback, and self-development activities. Due to the Company's military contractor status, the applicant must be a U.S. citizen or a permanent resident of the United States and must provide evidence of citizenship or immigration status upon applying for the position. Advanced Atomization Technologies, LLC is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, or any other consideration made unlawful by federal, state or local laws. ("Minority/Female/Disability/Veteran/VEVRAA Federal Contractor”). Typical Mental and Physical Demands: While performing the duties of this job, the team member is required to walk, stand, and sit for extended periods of time. The team member is required to demonstrate manual dexterity and use hands to operate machinery. Specific vision abilities required by this job include close vision. Also expected of the team member is regular attendance and the ability to work cooperatively and professionally with others. May be required to lift up to 50lbs. In addition to the key responsibilities listed above, this position requires successful completion of all other duties assigned by management.

Founded in 1968, our company has become a niche player in the manufacturing industry as we continue to create high quality, graphite-based components for the aerospace industry. We are happy to say that we will be expanding into new facilities! With the expansion comes growth, and we are in need of a valuable member of our machining team to help create intricate components for our clients. This is a particularly good fit for those with Lathe experience! Shift: B (3pm to 11:30pm) or C shift (11pm to 7:30am). Pay: $20-25/hour DOE. There is a 10% differential for the B shift, and 15% for C! What we offer: We offer one of the best work environments in Rochester along with all the benefits you will need for personal stability. This includes healthcare, dental, vision, PTO, 401k, and supplemental insurances. Moreover, we have an outstanding breakroom and onsite gym! Principle Duties: Set up and operate CNC lathes or mills Produce quality components at very high tolerances (this is for the aerospace industry!) 1st piece inspection and routine quality control Assist maintenance with troubleshooting equipment issues Maximize output for any given task Effectively communicate with co-workers and supervisors Your Abilities and Background: High School diploma or equivalent Direct machining experience is required for this position. There is a strong preference for those with experienced with CNC lathes Knowledge of GD&T Punctual, communicative, and willing to learn Thank you so much for taking the time to consider working with us. We hope to speak with you soon!

Requirements ITAR REQUIREMENTS: This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person citizenship status. SKILL REQUIREMENTS: Able to work in a dynamic environment with changing priorities to exceed customer expectations Works independently, strong work ethic, is self-motivated and able to complete tasks with minimal supervision Ability to work on cross-functional teams to support the core business, ensuring quality products are delivered on time Computer aptitude (Outlook, PowerPoint, Word and Excel) Ability to read, write, and communicate in the English language Must be a team player and willing to learn new skills and concepts QUALIFICATIONS: Previous 3-5 years of experience in machining and with quality processes Some exposure and experience with manufacturing /CNC machining processes Understand continuous improvement or lean / six sigma principles WORK ENVIRONMENT: The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment. For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility. PHYSICAL DEMANDS: Sit or stand as needed. Walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday. Proper lifting techniques required. Ability and comfortability to work in small confine spaces while following proper safety protocol. SAFETY AND POLICY PRACTICES: Each employee must be knowledgeable of standard safety policies and procedures and adhere to the same while supporting the goals and objectives of the organization and recognizing the Company's need to achieve its business objectives. Each employee is responsible for complying with company hazardous waste disposal procedures. AFFIRMATIVE ACTION: ADDMAN Engineering is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities. All terms and conditions of employment will be administered without regard to an individual's sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. NOTE: This is intended to describe the general level of work being performed. This is not intended to be all-inclusive. The duties of this position may change from time to time, and the employee may perform other related duties to meet the ongoing needs of the organization. ADDMAN Engineering reserves the right to add, delete or modify these duties and responsibilities at its discretion. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Employment is at-will, and nothing in this job description is intended to create or imply a contractual relationship or alter the at-will status of the employee. Salary Description $23 - $26 Depending on experience

Job Description PEKO Precision Products: WE MAKE PRODUCTS THAT MATTER PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: CNC Machinist (A & B Shift) Your Role: The CNC Machinist is responsible for the set-up and operation of a variety of CNC machines. You will set up, operate, and manufacture products according to blueprint specifications and customer requirements. Reports To: Machining Supervisor What We're Looking For: Previous experience with the setup and operation of CNC Mills or Lathes Ability to read blueprints Knowledge of Geometric Dimensioning and Tolerances (GD&T) Ability to conduct a final inspection of a product to ensure that it is free from defects and ready for the next stage of production. Qualifications: Required High school diploma or GED equivalent 3 plus years experience in a machine shop environment 3 plus years of experience working with vertical mill machines Preferred Associates in precision machining Experience with multi-axis CNC milling with fanuc controls, MAZAK, or similar. Experience in horizontal mill machines Work Authorization: US Persons PEKO Perks: Competitive Total Rewards Tuition Reimbursement (IRS Allowable pre-tax Max) 401K, Medical, Dental, Vision Flexible Spending & Health Savings Accounts Life, Short and Long-Term Disability Recognition Awards & Discretionary Benefits Our Core Values: We care about our talented and loyal PEKO family. We are committed to providing a safe, clean, and positive workplace. We believe in transparency, honesty, and respect for all stakeholders. We are dedicated to maintaining an agile and financially prudent organization. We foster the belief that PEKO people are resilient problem-solvers impacting the future. Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice. For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $17.00-$32.00 per hour with a 10% shift differential. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR xsbax TfsJG

Job purpose Individual will be responsible for producing, modifying and repairing tools used in the manufacturing process. Must have 10+ years of experience reading prints and using mills, lathe, surface grinders and other standard tool room machines to make parts to print. Must have good attention to detail and accustomed to working and measuring to close tolerance and delicate parts. Responsible for maintaining work quality and doing in process inspection. Essential Duties Assembling, fitting and repairing tools Following engineering drawings, including interpreting GD&T Using 2D and 3D computer aided design and manufacturing software (CAD/CAM) Assisting with tool maintenance Teach basic machine operation to floor operators as required Give experienced input to tooling designs for better manufacturability Complete production operations requiring tool room machines Other tasks not listed here that arise from an ever-growing environment Other duties as assigned Key Responsibilities Responsibilities Measurement Make tools to engineer parts Parts measured to print Assemble and debug prototype tools Tools made for production put to use Readily assist production and engineer as required Tasks completed in a timely manor Qualifications Education: High school diploma or GED/Technical Training Certificate/Equivalent experience. Work experience: Journeyman Tool & Die Maker or equivalent with 5+ years of experience. Ability to read engineering prints with high understanding of GD& T High competency using micrometers, indicators, calipers, etc. Requires intermittent long periods of standing and/or walking Periodic lifting of materials not to exceed 40 pounds Willing to work beyond normal hours if needed Subject to stressful situations An understanding of both Metric and English measuring systems Ability to write and edit programs with understanding of cutting parameters Ability to use Manual Knee Mill, Manual Lathe, Grinder, Machine Tools, Inspection and measuring instruments such as micrometers, calipers, and indicators and power hand tools Working conditions May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used. Plant wide climate control and air conditioning Could work in areas with excessive noise. NOTE: Ear protection available. Physical requirements Could require intermittent and long periods of sitting and/or standing. Required to do repetitive work. Periodic lifting of materials not to exceed 50 pounds. Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran #ROC A Shift: Mon-Thurs: 5:30am - 3:00pm Fri: 5:30am-9:30am

In this role, you will operate, clean, and maintain a variety of precision machining equipment-with a strong focus on lathe operations. You will set up and run CNC and manual lathes to produce tight-tolerance components, while also working with mills, 3-axis, and 5-axis machines as needed. This position plays a key role in ensuring efficient production, maintaining equipment, and achieving high utilization through quality workmanship and attention to detail. . At ADDMAN, you'll be part of a skilled and growing team serving the defense, space and commercial aerospace industries. This position may be available on B or C shift, depending on business needs and candidate preference. ESSENTIAL JOB FUNCTIONS: Always has safety first in mind when working at ADDMAN, uses all personal protective equipment as required. Ensures all equipment and forklifts are functioning per design and function. Shuts down equipment and stops operations in unsafe conditions, lockout/tagout when necessary. Utilizes work instructions, set-up sheets and method documents to correctly operate machines and inspect machined parts. Reads and interprets all drawings, including geometric dimensioning and tolerancing. Accurately reads and records information (i. e. material manufacture date, number of parts produced, and other criteria) that is critical to the production process. Follows instruction from a traveler/router and machining procedures to perform the machining process. Operates various equipment and makes various parts to precise specifications utilizing knowledge of metal properties, set ups, layouts, and precision machining procedures. Ability to read and understand sketches, blueprints and thorough understanding of tools and proper use of fixtures. May set up, or learn to set up, and run CNC or manual machinery. Adjust controls to vary the depth of cut, RPM and rate of feed efficiently. Updates inventory systems for usage and scrap and prepares Material Tags for non-conforming parts. Capable of following detailed manufacturing processes to produce high-tolerance parts. Adheres to the AS9100 and ISO 9000 standards and complies with internal Quality Management System (QMS) standards. Utilizes various gauging equipment to ensure conformance to the engineering specifications and standards through the production run i.e. calipers, micrometers, gage pins height gages, dial indicators and precision scales. Maintains an accurate count and record production pieces and hours of production. Performs housekeeping and cleanup duties upon completion of assigned tasks. Actively participates in housekeeping and 5S efforts by maintaining an orderly, clean, and safe work area. Keeps equipment and product free of FOD, Foreign Object Debris. Promotes teamwork within the organization. Follows all Company Human Resources policies and process procedures. Performs other duties as assigned. Requirements ITAR REQUIREMENTS: This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person citizenship status. SKILL REQUIREMENTS: Able to work in a dynamic environment with changing priorities to exceed customer expectations Works independently, strong work ethic, is self-motivated and able to complete tasks with minimal supervision Ability to work on cross-functional teams to support the core business, ensuring quality products are delivered on time Computer aptitude (Outlook, PowerPoint, Word and Excel) Ability to read, write, and communicate in the English language Must be a team player and willing to learn new skills and concepts QUALIFICATIONS: Previous 3-5 years of experience in machining and with quality processes Some exposure and experience with manufacturing /CNC machining processes Understand continuous improvement or lean / six sigma principles WORK ENVIRONMENT: The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment. For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility. PHYSICAL DEMANDS: Sit or stand as needed. Walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday. Proper lifting techniques required. Ability and comfortability to work in small confine spaces while following proper safety protocol. SAFETY AND POLICY PRACTICES: Each employee must be knowledgeable of standard safety policies and procedures and adhere to the same while supporting the goals and objectives of the organization and recognizing the Company's need to achieve its business objectives. Each employee is responsible for complying with company hazardous waste disposal procedures. AFFIRMATIVE ACTION: ADDMAN Engineering is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities. All terms and conditions of employment will be administered without regard to an individual's sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. NOTE: This is intended to describe the general level of work being performed. This is not intended to be all-inclusive. The duties of this position may change from time to time, and the employee may perform other related duties to meet the ongoing needs of the organization. ADDMAN Engineering reserves the right to add, delete or modify these duties and responsibilities at its discretion. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Employment is at-will, and nothing in this job description is intended to create or imply a contractual relationship or alter the at-will status of the employee. Salary Description $23 - $26 Depending on experience