Machinist jobs in Santa Monica, CA - 427 jobs

Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we will encourage and empower you to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be the best solution for the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! ************************************* Summary The Manual Machinist will review samples, drawings or instructions to understand specifications of output, plan the sequence of necessary actions for the completion of a job, take measurements and mark material for cutting or shaping, select appropriate machines (e.g. lathes) and position or load material for a job and perform routine machine maintenance and repair minor damages. Responsibilities of the Manual Machinist include, but are not limited to: Review samples, drawings or instructions to understand specifications of output Plan the sequence of necessary actions for the completion of a job Take measurements and mark material for cutting or shaping Select appropriate machines (e.g. lathes) and position or load material for a job Determine and program size of batches, speed of machine etc. Monitor machine while working to adjust the feed, maintain temperature and identify issues Check output to ensure consistency with specifications and discard defects Keep records of approved and defective units or final products Perform routine machine maintenance and repair minor damages Qualifications of the ManualMachinist include, but are not limited to: Proven experience as machinist Experience in using and/or programming manual, semi-automated or automated tools and machines (lathes, grinders etc.) Ability to use precision tools (e.g. calipers) to take accurate measurements Knowledge of the properties of metal and other material Ability to read blueprints, schematics and manuals Good at math with analytical abilities Physical stamina and strength to lift heavy items Acceptable driving record, according to company guidelines. High school diploma or equivalent; completion of vocational training or an apprenticeship will be an asset #zrjj Additional Information Physical Demand: Must be able to lift up to 50 lbs. unassisted. Pay: $25 - $55 DOE Working Conditions: Shop Environment Training/Certifications: N/A Shift Time/Overtime: Day Shift 6 am to 6 pm Travel: N/A Education: HS Diploma or GED DXP is always looking for individuals who want to join a team of employees who have the desire to achieve remarkable accomplishments together. The culture of the organization is supportive and goal oriented with high expectations, yet it is an environment where the team spirit inspires everyone to do their best. All DXP employees play a vital part in the organization and are treated with respect. By applying to DXP, you will have the opportunity to speak with some of the most respected professionals in the industry. DXP offers a comprehensive benefits package including: Medical, Dental, Vision, Flexible Spending, 401(k), paid holidays, Life and Disability Insurance, and additional supplemental products. Minimum Required Salary and benefits commensurate with experience. We are an equal opportunity employer. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. EOE/M/F/D/V

Duration: 1-Year Contract (Possible 1-Year Extension) CNC Programmer / Machinist (Multi-Axis) | Motorsports & Racing Engines Build precision parts that win races. We're hiring an experienced CNC Programmer / Machinist to manufacture high-performance racing engine components in a fast-paced motorsports environment. This role is ideal for someone who thrives on complex multi-axis machining, tight tolerances, and owning the full process from programming to finished part. What You'll Do: Program multi-axis CNC mills using MasterCam Create and optimize advanced tool paths for close-tolerance engine components Design and develop fixtures, tooling, and work-holding Set up, operate, and optimize CNC machines Troubleshoot machining issues and improve processes Collaborate with engineering and production teams under real race-driven deadlines What We're Looking For: 2-year CNC technical degree + 5 years experience, or 10+ years hands-on CNC programming 7+ years CAD/CAM programming experience (tooling, fixtures, manufacturing processes) Strong background in precision machining and machine setup Experience with: MasterCam (multi-axis) Fanuc controllers (preferred) CATIA V5 AMG Organized, detail-driven, and comfortable managing multiple projects Proficient with Excel, Word, and PowerPoint Why This Role: Work on racing engine components, not production widgets High ownership and technical autonomy Solve real machining challenges that impact performance and reliability Join a team where precision, speed, and results matter

CNC Mill Programmer / Set-Up Machinist (3-Axis / 4-Axis / 5-Axis) RJ Enterprises is seeking an experienced CNC Mill Programmer / Set-Up Machinist to join our growing team. This position is ideal for a hands-on machinist with strong programming and set-up experience in a job-shop environment. Responsibilities: Program CNC mills using Surfcam, Mastercam, or Hypermill Set up and run 3-axis, 4-axis, and 5-axis CNC milling machines Manufacture high-precision machined components Work from engineering drawings, models, and specifications Troubleshoot machining and programming issues as needed Qualifications: 3-5+ years of CNC programming and set-up experience Strong background in precision machining Job shop experience required Ability to work in a fast-paced, changing environment Solid understanding of CNC programming and machining processes Strong communication and problem-solving skills To Apply: Please send your resume to *********************

When you visit the Disneyland Resort, are you the one in your group looking at how things work? Are you an Automotive-Maintenance mechanic - and do you enjoy working with your hands and repairing large equipment? Are you tired of companies closing their doors or moving out of state? Then we may have your dream job! Basic Qualifications : You must be at least 18 years of age to be considered for this role Two or more years experience directly related to automotive mechanics Schedule Availability Shifts are typically at night, and individuals must have availability to work Sunday through Saturday, any shift (1st, 2nd, and 3rd shift) including holidays, and must be open to any days off. Additional Information : SUBMITTING YOUR APPLICATION After clicking Apply Now below, the employment application will open in a new window. Please complete ALL pages of the application by clicking Next on each page, then Submit on the final page. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, Facilities, HeroesWorkHere The pay rate for this role in California is $40.02 to $48.73 per hour, which follows the pay scale agreed upon in the Collective Bargaining Agreement. The base pay actually offered may vary depending on the candidates geographic region, job-related knowledge, skills, and experience, among other factors. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ****************************************

Job DescriptionSalary: $52-$58/hr Nikon AM Synergy Inc. is a cutting-edge provider of metal additive manufacturing (AM) solutions, specializing in the aerospace, defense (ultra-secure), and space industries. We focus on the manufacture and certification of production flight hardware, aiming to drive industry growth through the integration of AM technology. As a part of the Nikon Advanced Manufacturing Ecosystem, we leverage our engineering and manufacturing capabilities, alongside Nikon SLM Solutions and organic AM solutions, to push the boundaries of additive manufacturing in industry. Prototype Machinist The Prototype Machinist is responsible for programming and operating machinery to produce parts that conform to blueprints, adhering to GD&T specifications. This role involves working 35 axis machines, Wire EDM, as well as other pneumatic abrasive tools. A keen eye for detail and strong mechanical aptitude are essential. This position reports directly to the Senior Operations Manager. Job Duties / Responsibilities: Creates machining programs. Complete set-ups. Machine parts to conforming tolerances Perform and maintain accurate in-process quality inspections and records. Identify and recommend process improvements to reduce part quality variation. Input data into visual management forms and convey results to management. Continuously improve processes and procedures to eliminate waste. Set up, operate, and perform daily maintenance on CNC equipment. Assist in the deburring of parts. Required Skills: Ability to read and understand blueprints to meet specified dimensions (GD&T). Understanding of machine tool accuracies, fixture offsets, and tool offsets. Knowledge of cutting tool feeds, speeds, and tool life for aerospace hard turning or milling. Proficient in using precision measuring instruments (calipers, micrometers, dial indicators, precision scales). Ability to maintain close tolerances (within 0.001) for IDs, ODs, roundness, concentricity, and squareness. General knowledge and skill in using wire EDM and bandsaws. Proficient with hand, power, and pneumatic tools (pliers, screwdrivers, hammers, punches, chisels, saws, clamps, drills, impact hammers, abrasives, grinders, and rotary drills). Ability to communicate effectively with employees and management. Desired Qualifications: Experience with Siemens NX CAM Experience running DMG Mori equipment including DMU60, and DMC125 FD with Siemens 840D Control Experience with set-up and machining Additive Manufacturing (metal-LPBF) parts Mechanical Design Modeling Lean Manufacturing including 6S Education / Experience / General Requirements: High school diploma or equivalent. Minimum 3 years of experience in operation setup on CNC machines (required). Good vision abilities, including close vision, peripheral vision, and the ability to adjust focus (required). Ability to lift a maximum of 50 lbs. (over 25 lbs. with assistance) (required). REQUIRED: Applicants must be able to obtain and maintain a SECRET Security Clearance as required for this position. Ongoing employment is contingent upon maintaining the clearance. To obtain a SECRET Security Clearance US Citizenship is required

Manual Machinist Pay: $16.50 - $45.00 per hour Why Join Us? Are you a hands-on machinist who enjoys working with precision tools and creating high-quality parts? We are looking for a dedicated Manual Machinist to join our growing team! In this role, you will operate and maintain manual machines, including lathes, milling machines, and grinders, to create precision parts for aerospace applications. Responsibilities Operate manual lathes, mills, and grinders to machine parts to specifications Read blueprints and use shop math to ensure accuracy Set up tools, fixtures, and materials correctly Inspect parts for quality and make adjustments as needed Follow safety procedures and best machining practices Assist in process improvements and collaborate with the team Experience with CNC machines is a plus but not required Work with Hardinge lathes, Bridgeport mills, LeBlond lathes, and drill presses (experience preferred) What We Offer Training & Development: On-the-job training, vocational training, and up to $1,000/year for education Health Benefits: 100% paid medical, dental, and vision for employees 401K & Profit Sharing Paid Time Off: 2 weeks after 1 year, 3 weeks after 5 years Paid Holidays: 7 major holidays per year Work Perks: Monthly catered lunches, work boot & safety glasses allowance, employee discounts Overtime Opportunities What You Need At least 1 year of manual machining experience or related training Ability to read and interpret blueprints Strong attention to detail and quality Knowledge of speeds, feeds, and tooling (a plus!) Physical Requirements Must be able to stand, walk, and use hands frequently Ability to lift up to 50 lbs as needed Be part of a supportive and skilled team that values precision, teamwork, and continuous learning. We believe in investing in our employees and providing a great work environment. Get a glimpse of our shop environment and culture by watching this video: ******************************************** Apply today! For more information on our benefits, visit: *************************************** 6:30 AM - 3:00 PM, Monday to Friday (with overtime opportunities)

Job Description Manual Machinist Pay: $16.50 - $45.00 per hour Why Join Us? Are you a hands-on machinist who enjoys working with precision tools and creating high-quality parts? We are looking for a dedicated Manual Machinist to join our growing team! In this role, you will operate and maintain manual machines, including lathes, milling machines, and grinders, to create precision parts for aerospace applications. Responsibilities Operate manual lathes, mills, and grinders to machine parts to specifications Read blueprints and use shop math to ensure accuracy Set up tools, fixtures, and materials correctly Inspect parts for quality and make adjustments as needed Follow safety procedures and best machining practices Assist in process improvements and collaborate with the team Experience with CNC machines is a plus but not required Work with Hardinge lathes, Bridgeport mills, LeBlond lathes, and drill presses (experience preferred) What We Offer Training & Development: On-the-job training, vocational training, and up to $1,000/year for education Health Benefits: 100% paid medical, dental, and vision for employees 401K & Profit Sharing Paid Time Off: 2 weeks after 1 year, 3 weeks after 5 years Paid Holidays: 7 major holidays per year Work Perks: Monthly catered lunches, work boot & safety glasses allowance, employee discounts Overtime Opportunities What You Need At least 1 year of manual machining experience or related training Ability to read and interpret blueprints Strong attention to detail and quality Knowledge of speeds, feeds, and tooling (a plus!) Physical Requirements Must be able to stand, walk, and use hands frequently Ability to lift up to 50 lbs as needed Be part of a supportive and skilled team that values precision, teamwork, and continuous learning. We believe in investing in our employees and providing a great work environment. Get a glimpse of our shop environment and culture by watching this video: ******************************************** Apply today! For more information on our benefits, visit: *************************************** 6:30 AM - 3:00 PM, Monday to Friday (with overtime opportunities)

A Conventional and CNC Machinist that works from blueprints, rough sketches, and verbal instructions to fabricate a variety of complex machined components. Performs non-repetitive assignments of a complex and difficult nature, involving the setup and operation of a wide variety of machine tools, such as lathe, mill, grinder, drill press, hand tools and CNCs. Knows the working qualities of a wide variety of materials including aluminum, stainless steel, brass and other materials. Type of Position: Temporary to Hire Hourly Rate: $25.00 - $40.00 Duties and Responsibilities • Studies specifications, such as blueprints, sketches, models, or descriptions and visualizes product to determine materials required and machines to be used to fabricate parts • Computer dimensions, plans layout, and determines assembly method and sequence of operations •Works with Engineering team to determine best possible machining methods •Sets up and operates machine tools, such as lathes, milling machines and grinders to fabricate parts and verifies conformance of machined parts to specifications •Verifies dimensions, alignments and clearances using measuring instruments, such as dial indicators, gauge blocks, thickness gauges, and micrometers •May examine previously used tools, jigs, fixtures and designs and modify parts •Assists Manufacturing Engineering in design and development of production jigs and fixtures •Performs other related duties as required and assigned Education and Experience • High School diploma required • 5 years related to high volume production Machine Shop experience • Aerospace or manufacturing experience preferred • Ability to demonstrate hands-on capability with programming and machine • Strong organizational, interpersonal, and communication skills, both oral and written • Proven ability to adapt to fluctuating work assignments and fast paced environments • Detail-oriented with sound judgment, great follow-through and initiative • Demonstrated ability to work well in a team environment, proactive, and work independently • Proficient in Microsoft Office applications, including Word, Excel, PowerPoint, and Outlook Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to walk. The employee is occasionally required to stand and sit. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. ITAR Requirements To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Hydra Electric Company is an Affirmative Action and Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. If you'd like to view a copy of the company's affirmative action plan or policy statement, please email ********************. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail ******************** or call ************. This email and phone number are created exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only messages left for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. Equal Employment Opportunity Posters

Join ATC Automation as a Senior Machinist located in Simi Valley, CA We are seeking a skilled Senior Level Machinist to join our Tooling and Fabrication team in Simi Valley, CA. In this role, you'll set up and operate conventional and specialized machining equipment to fabricate both metallic and non-metallic parts. You will also program and operate CNC machines, Hybrid CNC Mill, Manual Mill, Lathe, grinders, bandsaws and other machine shop equipment based on project needs. This position requires strong knowledge of machine shop practices, materials, tooling, and layout techniques. With a competitive hourly rate ranging from $35-$40 depending on experience, your expertise will be valued and rewarded as you tackle challenges head-on in the ever-evolving automation industry. You can get great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Health Savings Account, Flexible Spending Account, Competitive Salary, and Paid Time Off. Take the next step in your career and become part of a forward-thinking culture that thrives on professional growth. Who We Are Since 1977, ATC has been redefining what's possible in industrial automation. From concept to commissioning, we partner with leading brands across the globe to design and deliver custom machinery that drives efficiency, precision, and long-term performance. Our automation expertise spans critical industries that shape the way we live and move-Life Science, Transportation, Consumer Products, and General Industry. Primary Responsibilities Read and interpret engineering drawings and specifications to determine part dimensions and tolerances. Program, set-up and operate HAAS CNC Machine and Hybrid CNC Mill. Set up and operate lathes, mills, and other conventional and manual machinery. Machine and grind components to precise specifications. Select or design, fab and install appropriate fixtures, cutting tools, and accessories. Calculate proper speeds and feeds based on material type and tooling. Use precision measuring instruments (e.g., micrometers, calipers, height gages) to verify part accuracy. Use computers to locate files, print drawings, and inspect 3D models using tools like eDrawings. CAD/CAM 5 year minimum (Master CAM or Rhino CAM a plus). Perform work assignments from the Working Foreman and collaborate with the team as needed. Physical Requirements Ability to stand for extended periods. Lift and move objects weighing: Up to 50 lbs occasionally. Up to 25 lbs frequently. Up to 10 lbs constantly. Use hands and fingers to handle or feel materials and tools. Ability to bend, push, pull, and reach overhead. Work Environment High noise levels from operating machinery. Exposure to physical hazards such as moving machine parts. Breathing fumes, dust, and mist; exposure to oils and fluids. Minimum Qualifications High school diploma or equivalent. 7-10 years of hands-on machining experience (Manual Machining or similar). 5-8 years of hands-on CNC programming and operating experience. Preferred Qualifications Vocational or technical certification in machining. 5-10 years of experience in a machining or fabrication environment. Exceptional math and mechanical aptitude. Clear written and verbal communication skills. Highly skilled with blueprint reading and 3D model interpretation. Team-oriented mindset and strong problem-solving skills. Ability to plan, multitask, and perform under pressure. Additional Skills & Traits Effective communicator-both written and verbal. Positive and professional demeanor. Reliable attendance and punctuality. Able to follow directions and work independently or as part of a team. Organized and detail-oriented. Ability to work efficiently in a fast-paced environment. Willingness to perform other duties as assigned by management. Machining-Specific Skills: Strong understanding of feeds and speeds for various tools, including: Endmills Drills Reamers Shell mills Ability to estimate machining times, including: Very basic profile parts More complex parts made from stainless steel or other hard materials Disclaimer: This has been designed to indicate the general nature and level of work performed by employees within this classification. It is not intended to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this position. This job description is subject to change but will remain in effect until superseded or canceled in writing by Human Resources. ATC Automation is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law. ATC Automation is the Automation segment of TASI Group. The TASI Group of Companies is comprised of four technologically advanced Strategic Business Segments commonly linked by a disciplined focus on Product Integrity, Package Integrity, and Automation. Each TASI company delivers world-class products and services, focusing on our global customer needs in diverse market segments. TASI has served several thousand global customers over the years and enjoys a very high rate of repeat customers, many of which are Blue Chip Global Companies. Major Markets include: Automotive, Medical Devices, Life Science, Pharmaceutical, Packaging, Oil & Gas, Food & Beverage, Consumer Goods and General Industrial Equipment. Job Posted by ApplicantPro

About the Company General Matter is enriching uranium in America. Our mission is to restore our country's ability to make nuclear fuel. Our fuel will help power AI, manufacturing, and other critical industries. It will power our next generation of reactors. Ultimately, it will power our national ambitions. We were incubated by Founders Fund, like Anduril and Palantir before us, and we are backed by top tier investors. Our lean, world-class team of engineers and operators is applying a first-principles approach to solving the problem of nuclear fuel production. We are a mission-driven company with a culture of urgency, accountability and transparency. Fabrication Build Specialist: The General Matter Development team is responsible for the fabrication and assembly of new product development, production tooling, and automation equipment for the buildup of the GM Production factory. Technicians work closely with the engineering team to support high-impact projects to grow the GM Production line, from development to a high-volume production system. Responsibilities: Fabricate piece parts to print using machine shop and fabrication equipment Building complex mechanical assemblies to a high standard, which may include, high and low-voltage wiring, and pneumatics Equipment operation including; forklifts, boom lifts, scissor lifts, and tractor trailers, for critical moves/lifts within the facility Basic Qualifications: High school diploma or equivalency certificate 4+ years of welding experience including AC/DC TIG, MIG (shielded and none shielded) 3+ years of experience in manual machine operations, Milling and Lathe. 3+ years of experience using fabrication tools; drill press, sanders, hand tools, cutting torch, plasma cutter, material saws. Preferred Skills and Experience: Able to read blueprints and complete basic shop math Able to read and interpret fluid or electrical schematics Able to work independently and problem-solve efficiently with minimal supervision Positive attitude and ability to work well on a team Willingness to provide constructive feedback to the engineering and production teams to improve tooling designs, processes, and parts Able to stay organized with strong attention to detail Precision hole drilling operations Proficient computer skills; comfortable with using email and the Microsoft Office suite CAD design skills using NX to design basic parts Laser tracking Experience Additional Requirements: Physical effort including standing, lifting, and carrying equipment up to 50 lbs. unassisted Must be able to work all required shift hours, overtime and/or weekends as needed Equal Opportunity Employer General Matter is an Equal Opportunity Employer; employment with General Matter is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Compensation and Benefits: Pay range: Technician /Level 1: $27.00 - $34.50/hour Technician /Level 2: $34.00 - $44.00/hour Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. Please note that the stated salary range is an estimate and may be adjusted based on market conditions, business needs, or other factors. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan.

Operation of automatic and/or manual wire bond equipment in a clean-room environment, to manufacture high-reliability microelectronic devices. Essential Duties and Responsibilities: * Read and interpret assembly instructions, drawings and work instruction processes. * Set up and run automatic and manual wire bond equipment * Ability to handle computers in order to fine tune machine programs. * Written tests for ESD + wirebond and ribbon bond requirements. * Use tools such as fine tipped tweezers, x-acto knives, vacuum pencils, dental probes, calipers, scales. * Knowledge of periodic machines certification for bond strengths. * Inspect and know the difference between an acceptable epoxy placement, die attach assembly, sub attached assembly and wire bond and ribbon bonds on a microelectronic device, in conformance with work instructions, drawings and specifications. * Inspect - to the drawings/specs and procedures - the devices for defects before starting the assembly and after finishing his/her part of the assembly. * Adhere to all ESD and other handling requirements. * Comply with all in-house training as identified in job specific family and or specific training plan. * Follow company 6S and continuous improvement (kaizen) objectives. * Perform all other duties, as assigned.

Operation of automatic and/or manual wire bond equipment in a clean-room environment, to manufacture high-reliability microelectronic devices. Essential Duties and Responsibilities: Read and interpret assembly instructions, drawings and work instruction processes. Set up and run automatic and manual wire bond equipment Ability to handle computers in order to fine tune machine programs. Written tests for ESD + wirebond and ribbon bond requirements. Use tools such as fine tipped tweezers, x-acto knives, vacuum pencils, dental probes, calipers, scales. Knowledge of periodic machines certification for bond strengths. Inspect and know the difference between an acceptable epoxy placement, die attach assembly, sub attached assembly and wire bond and ribbon bonds on a microelectronic device, in conformance with work instructions, drawings and specifications. Inspect - to the drawings/specs and procedures - the devices for defects before starting the assembly and after finishing his/her part of the assembly. Adhere to all ESD and other handling requirements. Comply with all in-house training as identified in job specific family and or specific training plan. Follow company 6S and continuous improvement (kaizen) objectives. Perform all other duties, as assigned. Qualifications Job Knowledge, Skills & Abilities: Perform general physical activities. Monitor processes, materials and surroundings. Ability to operate Plasma Cleaners, Auto wirebond, Ribbon bond and Bond Pull machines used for microelectronic devices: K&S1488, Palomar 2460, Palomar 8000, Palomar 9000 - auto wirebonders, Palomar 2470 - auto ribbon bonder and Dage 4000, Dage 2200, Unitek MicroPull III & IV bond pull machines or Equivalent. Minimum 2 years working experience as an Auto wirebonder/Auto ribbon bonder in a microelectronic assembly factory. Familiar with MIL-PRF-38534 requirements for microelectronics' assembly. Ability to work in a class 100,000 (class 8) clean room environment using clean room antistatic gowns, facemasks, hair covers etc. Ability to work with a 30X microscope throughout the day. Ability to work in manufacturing area with normal factory noise levels. Ability to work on a team and be a good team member. Ability to access documents using a computer Should not have a problem in using chemical based cleaning systems for cleaning build substrates etc. Sense of urgency, successful at meeting deadlines. Mechanical aptitude/dexterity and the ability to lift up to 20 lbs Fluency in English Language- Reading, written & spoken Education/Experience: High School Diploma /GED or equivalent experience Valid Permanent Resident or citizen of the United States of America Due to ITAR and / or CUI compliance, this position requires candidates to be a U.S. Citizen, Permanent Resident Alien, or Protected Individual per 8 U.S.C.1324b(a)(3). Benefits Offered: Comprehensive benefit package including medical, dental and vision coverage; company-paid basic life/AD&D insurance, short-term and long-term disability insurance; voluntary supplemental insurances, flexible spending accounts and employee assistance program (EAP). Sick Leave, Vacation Time, and company-paid Holidays are also provided as paid time off. NEOTech also provides a 401(k) Retirement Savings Plan option with a company match. NEOTech is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran status, or any other characteristic protected by applicable federal, state, or local law. NEOTech has a long-standing commitment to maintaining a safe, quality-oriented and productive work environment. We also want all employees to perform their duties safely and efficiently, in a manner that protects their interests and those of their co-workers. We recognize that alcohol and drug abuse pose a threat to the health and safety of NEOTech employees and to the security of the Company's equipment and facilities. For these reasons, NEOTech is committed to the elimination of drug and alcohol use and abuse in the workplace. NEOTech conducts pre-employment and post-accident drug screening.

Amca is building airplanes for the 21st century, starting by designing new hardware that flies on today's planes. Aviation was once humanity's boldest ambition, but the industry hasn't successfully built a new plane in 40 years. We don't think it has to be this way. Overview: You will work with tool makers and engineering teams to run prototype parts, develop tools, program prototype CNC machining operations, and roll out short run production parts to rapidly convert design ideas into prototypes. Responsibilities: Use in-depth familiarity of geometric dimensioning and tolerancing (GD&T) to machine tools, molds, and initial prototype parts based on desired final part geometries CNC Milling, Turning and Mill-Turn equipment programming and editing Creatively machine, fabricate and assemble plastic injection molds, prototype aerospace parts, short-run machined parts, tooling, and fixturing Perform manual milling, turning, grinding Go from rough engineering concept sketches to completed prototype parts, tools and fixtures as quickly as possible Provide and ensure adherence to tool and part Design for Manufacturability feedback Apply creative solutions to perform spur of the moment design and machining adjustments to achieve desired part outcomes in a fast-moving environment Assist with machine selection, initial machine setup and commissioning, and routine maintenance Qualifications: 5+ years of experience in machining, with a focus on aerospace or high-precision components. (Preference for 5-axis experience) Proficiency in CAM software (e.g., Mastercam, HyperMill, Esprit) and 3D CAD tools (e.g., SolidWorks, Siemens NX, Catia) Deep understanding of G-code, M-code, and CNC programming and editing Ability to learn and use a variety of software to observe, analyze, evaluate, and communicate pertinent information Strong knowledge of GD&T, blueprint interpretation, and tolerance stack-ups Hands-on experience with precision inspection tools (CMM, micrometers, calipers, dial indicators, depth and height gauges) Preferred experience: machining injection mold tooling, including wire and die sinking EDM This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a US person as: any individual who is granted U.S. citizenship; or any individual who is granted U.S. permanent residence ("Green Card" holder); or any individual who is granted status as a "protected person" under 8 U.S.C 1324b(a)(3). The Advanced Manufacturing Company of America prohibits discrimination or harassment based on the following categories: race, color, religion, religious creed (including religious dress and grooming practices), national origin, ancestry, citizenship, physical or mental disability, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, protected medical leaves (requesting or approved for leave under the Family and Medical Leave Act or the California Family Rights Act), domestic violence victim status, political affiliation, and any other status protected by state or federal law.

A leading provider of metal additive manufacturing (AM) solutions is seeking a Prototype Machinist to support its work in the aerospace, defense (ultra-secure), and space industries. The company focuses on the manufacture and certification of production flight hardware, driving industry growth through the integration of AM technology. Leveraging advanced engineering and manufacturing capabilities, they are pushing the boundaries of additive manufacturing in high-performance sectors. The Prototype Machinist will program and operate machinery to produce parts that conform to blueprints, following GD&T specifications. This includes working on 3-5 axis machines, Wire EDM, and various pneumatic abrasive tools. The role requires a strong mechanical aptitude, attention to detail, and the ability to deliver precision work. This position reports directly to the Senior Operations Manager. Job Duties / Responsibilities: Creates machining programs with Siemens NX CAM Complete set-ups. Machine parts to conforming tolerances Perform and maintain accurate in-process quality inspections and records. Identify and recommend process improvements to reduce part quality variation. Input data into visual management forms and convey results to management. Continuously improve processes and procedures to eliminate waste. Set up, operate, and perform daily maintenance on CNC equipment. Assist in the deburring of parts.

Who is FMI? FMI Aerostructures is one of the largest independent manufacturing businesses serving the aerospace & defense industry. Our 250-member team has been a trusted supply chain partner that manufactures critical structural components and complex assemblies for major aerospace players for over 40 years. Why FMI makes a difference? Customers are at the center of everything at FMI. We are excited that this team can work with key partners like Northrop Grumman and Lockheed Martin using our critical components to help important new aerospace programs take flight. Our machinists are the best in the industry, and we are investing to support their continued success. When they win, our customers win. Why FMI could be the right fit for your career? This is an opportunity to work locally for a long-standing, stable business that is investing to grow. Summary: CNC Machinists are highly skilled professionals, able to work with great concentration and precision. They must be responsible and comply with all safety guidelines. A keen eye for detail and great mechanical aptitude are also essential. Essential Duties and Responsibilities: · Requires using hands to handle tools or controls · Requires repetitive movement · Must have vision (with or without assistance) capable of seeing small objects at a close distance · Requires prolonged standing/sitting · Requires lifting up to 25lbs Responsibilities: · Call up CNC programs · Set-up machine and produce parts · Set up equipment/machinery and install equipment or attachments on machinery or related structures · Read and understand job traveler instructions, technical drawings and set-up diagrams · Measure and record products or materials to control quality · Monitor machinery/equipment operation to detect problems · Use hand tools; Adjust production equipment / machinery setup · Load or unload material onto machinery · Clean equipment or machinery · Apply Procedures and Work Instructions Requirements: Required Skills / Experience: - Ability to read, comprehend and follow instructions and directions - Must be able to read, speak, write and understand English - Ability to read blueprints - Knowledge and the ability to read and understand 1/1000-, 1/100- and 1/10-inch measurements- G and M codes · Compare for correctness, count accurately · Good communication skills · Good interpersonal skills · Self-starter with demonstrated ability to achieve results · Basic mathematics for daily use formulas · Positive attitude, Team player, Manufacturing/CNC experience/background, Cleanroom experience · High school diploma, GED or five (5) years work experience. · This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Physical Demands The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to walk and climb or balance. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to high, precarious places and vibration. The employee is occasionally exposed to fumes or airborne particles; toxic or caustic chemicals, and outside weather conditions. The noise level in the work environment is usually quiet to moderate. Compensation details: 22-40 Hourly Wage PIda4d762b75df-31181-37431773

Set up and operation of lathes, honing machines, surface grinders, hydraulic presses, and other tool room machinery. Cutting, reaming lapping, and polishing of carbide inserts to tolerances of .0003"/.0005" Knowledge of press fits and ability to assemble a series of inserts with or without a cap/wafer into a die case. Understanding of finishes, extrusion relief, angles, radius, venting, carbide grades and other tool making variables. Qualifications High School Diploma or GED. Ability to analyze and accurately read and interpret blueprints, customer drawings and industry specifications required. Proficient in the use of inspection equipment (such as micrometers, calipers, indicators, gages, comparator, etc.). Attention to detail with ability to think and act analytically and use mathematics to meet job requirements Ability to follow verbal and written instructions. Strong interpersonal skills including listening, speaking, and writing. Effective team member, willing to work and communicate with all levels of the business Excellent attendance record, including punctuality. Ability to work over-time as required including weekends when needed. Ability to lift and carry up to 40 lbs. Ability to stand 90%-100% of shift

Job Description As a Manual Machinist you will be responsible for operating several manual Machines in a shop environment. The machines that will be utilized are: Conventional and Manual Lathe, Broach Machine, and Drills. Responsibilities and Duties Be trained on the assigned work center Use proper fixturing and tooling to set up and complete each job Ensure machines are maintained on a daily level Communicate with lead for jobs assigned each day/week Provide feedback on anything pertaining to getting the job completed safely and efficiently Ensure proper document control when working on jobs Follow verbal instructions Selects appropriate machine and setting for a given task Promote and practice Quality Awareness and Quality Culture within the Machine Department Qualifications and Skills Understand how to read Blueprints and general GD&T (General Dimensioning and tolerancing) Knowledge of how to operate Manual Machinery I.E. (Lathe, Knee-mill, Radial Drill, Broach Machine) Use of practical measuring tools (Calipers, Scales, Micrometers) Able to lift up to 50lbs. Able to stand for 8 hours a day Basic understanding of machine maintenance and lubricants used. Experience machining parts with large swing diameters on conventional Lathes up to 135" Experience with Vernier Calipers up to 48"in length. Experience in Pump Manufacturing Industry (Highly desirable) Minimum 2-3 years' experience. Benefits and Perks Medical (Company Contribution) Dental Vision Profit Sharing (3% company match) Company paid Life Insurance 10 Paid Holidays PTO/Sick Time Powered by JazzHR 1gGJ5GcfUI

Primary Duties & Responsibilities: Work safely under functional safety guidelines such as PPE and equipment interaction. Adheres to quality processes including in-process inspection to ensure compliance with quality specifications. Correctly interpret work orders Lift up to 45lbs Able to work overtime as needed Operate basic Lathes, Grinders, and Polishing Equipment Machine intermediate tooling components with assistance Begin to perform basic equipment setups Communicate with other departments as needed (Thread-roll, heading, etc.) Work in a team environment, i.e. follow instructions and assist others as needed. Performs other related duties as assigned or requested. Required Skills: The ability to read and write English. The ability to perform basic shop math, fractions, decimals The ability to use basic hand tools, wrenches, etc. Intermediate print reading Basic familiarity with all relevant tools & equipment The ability to use basic inspection tools such micrometers, calipers, comparators The ability to navigate intranet to locate process documents - basic computer skills The ability to read and interpret work instructions and basic prints and dimensions Experience & Education Typically 1-3 Years GED or High School diploma preferred but not required.

Manufactures tool and dies for various production machines. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, jigs, fixtures, gauges, and machinists' hand tools. ESSENTIAL DUTIES AND RESPONSIBILITIES: Troubleshoots problems on production machines and repairs all types of stamping dies when necessary. Plans the sequence of operations, fabricates and assembles all types and sizes of tools and dies from tool design and engineering information. Sets up and operates a variety of machines such as the milling machine, lathe, surface grinder, jig bore in fabrication of tools and dies. Fabricates and assembles all types of sizes of tools and dies of irregular contours (including checking fixtures and precision gauges) such as progressive dies, and compound dies. Operates machine tools in fabrication of tools and dies as required. OD and surface of grinding of tools, dies and gauges as required. Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, and dial indicators. Study blueprints, sketches, models, or specifications to plan sequences of operations for fabricating tools, dies, or assemblies. Able to recognize cosmetic non-conformances based on Company specifications such as; burrs, galling, cracked edges, slug marks, dimensional changes in production parts and initiate action to prevent non-conformance such as stopping the machine and notifying Supervisor. Follow all 5S department procedures which include but are not limited to; keeping floors clean of oil and debris, returning tools to proper locations, organize part pans, and performs other housekeeping duties. Attends all required job related training (internal and external). All employees are responsible for complying with the rules and regulations set forth by Federal, Local, and State government, LISI Aerospace, and HSE Procedures. All employees are responsible for attending all training provided and for adhering to all HSE procedures, policies, and plans, conforming to reporting requirements, and safe operating procedures at all times. All employees are required to bring any known or suspected nonconformance for all company procedures or legal requirements to management's attention immediately. Continually seek opportunities to improve our HSE performance by establishing objectives and targets, measuring progress, and reporting our results. Other duties may be assigned. WAYS OF WORKING, EXPERIENCE, AND BEHAVIORS To perform the job successfully, an individual should demonstrate the following competencies: Analytical - Collects and researches data; uses intuition and experience to complement data; understands work flows and procedures. Technical Skills - Understands and has working knowledge of the tool and die process, procedures and function; Able to clearly share expertise and transfer technical knowledge to others. Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens intently to others and seeks clarification; Provides clear and pleasant responses to inquiries regardless of the situation. Written Communication - Writes technical documents clearly and accurately; Transfers technical data into meaningful written documents that can be understood by all levels of the organization. Team Work - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests. Business Acumen - Understands business implications of decisions. Cost Consciousness - Develops and implements cost saving measures; Cost effective; Conserves organizational resources; Strives to reach 100% RFT. Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Develops realistic action plans. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. Supervisory Responsibilities: This position has no supervisory responsibility. ESSENTIAL JOB REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience AA degree in related field or High School diploma or General Education Degree (GED) required; and completion of a craft apprenticeship, or a minimum of 5 years of related experience and/or training. Read and interpret blueprints or other job specifications. Ability to make all inspections on machined parts using precision measuring equipment. SKILLS AND ABILITIES Computer Skills To perform this job successfully, an individual should have basic knowledge of mainframe computer systems and be familiar with Spreadsheet and Word Processing software. Language Skills Ability to read a limited number of two and three syllable words and to recognize similarities and differences between words and series of numbers. Ability to print and speak simple sentences. Mathematical Skills Ability to add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certificates, licenses, registrations Evidence of “US person” is required under ITAR. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required stand. The employee is frequently required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision and depth perception. ENVIRONMENT, HEALTH AND SAFETY The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, fumes or airborne particles and vibration. The employee is occasionally exposed to toxic or caustic chemicals. The noise level in the work environment is usually loud. The responsibilities of the position include compliance with company and governmental safety, environmental and hazardous materials regulations and procedures. The employee will be required to wear Personal Protective Equipment in specified areas. Participate in the development and promotion of the HSE culture, be exemplary in terms of health, safety and the environment, in particular by : - Respecting and ensuring respect for the instructions and rules established in the field of health, safety and the environment (in particular the LISI golden rules) - Immediately correcting, whenever possible, or reporting to his or her superiors and/or the HSE department, any malfunction or risky situation in the fields of health, safety and environmental protection - Implementing preventive actions to reduce the environmental footprint and control health and safety risks - Participate, upon request, in analyses (of risks, incidents) and HSE working groups related to his/her professional scope - Be familiar with the main health and safety risks and the main environmental impacts relating to the scope of his/her work - Be familiar with the site's HSE policy and objectives - To be able to make proposals for improving working conditions and limiting environmental impact