Machinist jobs in Silver Spring, MD

The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the “Best Value” supplier in the industry. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Interprets drawings to visualize final form of die, part or tool, and plans sequence of operations to achieve desired end result Works from prints, sketches, verbal or written instructions, or from existing part to be copied or fitted Lifts, positions, and secures parts to be machined on surface plate or worktable, using hoist, vises, v-blocks, or angle plates Sets up and operates machine tools such as CNC mills and lathes, manual mills and lathes, CNC and manual grinders, wire EDM, saw Plans the set up and operation of machine shop tools considering types of material, tolerances, types of cutting tools, coolants, lubricants, and machine tool feeds and speeds Programs mills and lathes using conversational programming and/or CAM by entering instructions including setting zero and reference points, tool registers, tool offsets, geometry of part, etc. Verifies dimensions, alignments, and clearances of finished parts, using measuring instruments such as CMM, calipers, micrometers, height gages, dial indicators, and gage blocks Fits and assembles jigs, fixtures, tools and dies, using wrenches, hammers, arbor or hydraulic presses Troubleshoots poor performing tools, identifying deficiencies and suggesting improvements Designs jigs, fixtures, or templates for use as work aides Inventories, requests, and investigates alternative cutting tools and shop supplies Promptly and accurately completes all required recordkeeping and inspections Performs routine machine maintenance as assigned Other tasks, projects and functions as assigned. Requirements: High school diploma or equivalent preferred; equivalent relevant experience may be considered Trade school or Apprenticeship program preferred Exhibits in-depth job knowledge and skills Adjusts machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is not optimum Develop CNC machining processes by selecting the chucking device, cutting tools, tool arrangement, and cutting speeds and feeds with emphasis on standardization Create and maintain CNC programs to produce parts using CAD/CAM software. Experience utilizing GibbsCAM, MasterCAM, Fusion 360, Edgecam, Partmaker, or Esprit is a plus Thorough understanding of workholding, datums, sequence of operations, tool selection Can prioritize the work and coordinate with others Capable of fostering a team environment Self-motivated and can work with little supervision Thinks, plans, and responds quickly to unexpected events Able to multi-task in a fast-paced environment with changing priorities Active participant in troubleshooting and problem solving Capable of running multiple machines while they are in automatic cycles Basic Windows operating system navigation, Basic Microsoft Office Suite, CAM software experience preferred Math skills up to basic trigonometry (addition, subtraction, multiplication, division, finding an angle or tangent) Mechanical aptitude to understand how processes operate Technical skills and experience to solve complex problems and troubleshoot Analytical and critical thinking skills to foresee issues with designs or processes and come up with alternate solutions Attention to detail to ensure the highest level of precision in finished work Time management and having a sense of urgency for the jobs at hand Ability to work with others in a fast-paced manufacturing setting Learn more about U.S. Tsubaki at: U.S. Tsubaki offers: A competitive compensation package, including health benefits effective on date of hire, generous 401(k) match and profit sharing, education reimbursement, and annual bonus potential Paid time off (“PTO”) 90-day and 180-day performance reviews Shift differential pay for 2nd and 3rd shift Weekly bonus potential Paid training Weekly pay Shift: 4 days a week, 10 hours per day. Days: Monday - Thursday (standard schedule). Overtime may be required on Fridays/Saturdays according to business needs. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PI73310c8b6b78-30***********7

Are you looking to catapult your career by driving high-impact transformation with household brands? Do you crave an entrepreneurial, fast paced and engaging growth assignment working with incredible people from across the globe? At Dreyer's Grand Ice Cream, we are excited to start a new chapter of accelerated growth as part of Froneri - a global pure-play ice cream leader. Come help us transform DGIC into the #1 ice cream brand! With nearly 100 years of winning experience in the U.S, a robust portfolio of powerhouse brands that consumers know and love such as Häagen-Dazs, Drumstick, Dreyer's & Edy's, and the backing and coaching of European-based ice cream experts, we know we have the winning recipe. Headquartered in Walnut Creek, the Bay Area's hub for up and coming food trends, our teams across our offices and factories are raising the bar on all things ice cream. We are investing in significant capital expansion's to grow our Operations and Supply chain and are transforming how we work at every level to become agile, accelerate growth and elevate our quality. With a renewed focus on frozen treats, our tight-knit team of ambitious innovators are fully immersed in the business and encouraged to flex and make decisions quickly. We are committed to pursuing every great idea and delivering the best ice cream experience for our consumers, when and where they want it. Unleash your potential at Dreyer's Grand Ice Cream and discover what a sweet career we have in store for you! Job Purpose Statement: Reporting to the Automation and Controls Engineer, the welder / fabricator will be responsible for designing, fabricating, assembling / installing and repairing sheet metal, plastic and stainless steel parts. This position will utilize knowledge of working characteristics of metallic and non-metallic materials, machining, and layout techniques. Primary Responsibilities: Reading and interpreting blueprints and product specifications Performing Flat Pattern Layouts Using Hand Tools and measuring devices to perform basic tasks Using power tools, lathes, mills and welding equipment to perform complex tasks Working within teams or independently as directed Problem Solving process issues including redesign of equipment Repairing process equipment including pumps, gear reducers, seals, bearings, hydraulic/pneumatic systems, blowers, and conveyors. Supporting established Preventative Maintenance activities and identify new PM activities, as needed. Supporting continuous process improvement implementation and origination. Promote the Froneri culture of employees being owners rather than just employees. Position Requirements: Ability to read and interpret blueprints and product specifications Working knowledge of hand tools, power tools, lathe, mill and welding / fabrication equipment Must be able to read and follow blueprints, drawings and schematics 3 - 5 years' experience specializing in fabrication and / or welding (MIG, TIG and Stick welding processes, cutting torch, plasma cutting, etc.) Welding certification preferred but not required Excellent communication skills both verbal and written Good organizational and interpersonal skills Good math and analytical skills High School Diploma or GED Equivalent Must speak, read and write English BEHAVIORS AND CORE VALUES: Must consistently showcase the desired behaviors that represent our Core Values. We Take Ownership Stay committed to responsibilities from start to finish Make sound decisions and get into the right level of detail Apply resources to initiatives that add growth, improve efficiencies, or reduce waste We Do What Is Right Choose transparency over convenience, even if it means difficult conversations Set clear roles and responsibilities, enabling everyone to exercise appropriate initiative and judgment Speak up when you see something that does not align to our values and policies We Seek to Improve Strive to continuously improve and innovate to exceed expectations Value feedback from others and encourage open dialogue to understand how we can improve Learn from both successes and failures We Are Better Together Ensure decisions are based on what's best for the whole business Practice inclusion by seeking diverse perspectives Treat everyone with fairness and respect Work Environment: In this position, the employee will regularly work with and around others; in a wet and/or humid environment; in areas of high noise level; and around mechanical, electrical, and pressurized equipment. The work is fast paced. Cold Temperatures: Parts of the facility, such as storage and production areas, may be kept at low temperatures. Requires use of cold-protective PPE. May involve standing, lifting, and walking in refrigerated zones for extended periods. Fast-Paced: Workers often operate under strict timelines to meet production quotas. High-speed manufacturing floor with frequent movement, line assignment changes, and tight production timelines. Standing for Long Hours: Many roles require prolonged standing and repetitive tasks. Repetitive hand and arm movements required. Must be able to stand for hours with frequent bending, reaching, and lifting. Food Safety Regulations: Employees must follow hygiene and safety guidelines, including wearing protective gear (gloves, hairnets, etc.). Team-Oriented: Workers collaborate to ensure smooth production and packaging. The position involves frequent exposure to nuts and other potential allergens. The pay scale for this role takes into account the wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. At Dreyer's Grand Ice Cream, it is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. The pay range for prospective employees in this role is $42.20 per hour, with opportunities for overtime, shift differential, cold premium pay and annual bonuses (variable depending on company performance). We offer a comprehensive group benefits package including medical, dental, vision, life, paid time off, paid holidays, paid parental leave, 401K plan with employer match and annual contribution available. Dreyer's Grand Ice Cream Inc. provides equal employment opportunities for all applicants, regardless of race, religion, gender, national origin, age, disability, marital status, veteran status, or any other protected characteristic.

In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible. Job Description: Parsons is looking for a Machinist to support a government contract in the National Capital Region (NCR). The ideal candidate will be able to provide technical support to the customer's fabrication and manufacturing shops. The candidate must have demonstrated experience designing, programming, and manufacturing metal, plastic, and composite components. What You'll Be Doing: * Design and machine custom pieces and parts. * Identify and implement strategic improvements and solutions that are in line with the customer's vision and mission * Create and manage schedules for prioritized, approved work requirements * Ensure industry and customer standards and best practices are followed for all requirements * Provide detailed guidance on proper use, general machine maintenance, and minor repairs to shop equipment * Oversee the management of consumables and procurement support * Provide inputs on shop safety best practices and maintenance of the shop safety plan, to include application of OSHA standards What Required Skills You'll Bring: * BS degree and 10+ years of prior relevant experience; additional experience will be considered in lieu of degree. * 10 years of demonstrated experience in the metal working discipline(s) * 5 years of demonstrated experience in mechanical skills instruction * Possess Machine Certification from an apprentice program * Demonstrated CAD/CAM experience * Demonstrated ability to aid others in design and troubleshooting of mechanical component designs * Demonstrated ability to manage multiple taskings and adapt quickly to changing requirements * Demonstrated experience working independently, as well as part of a team, including strong customer service and interpersonal skills * Demonstrated experience and literacy with Microsoft Office suite * Must have a current/active TS/SCI with poly clearance What Desired Skills You'll Bring: * Demonstrated proficiency with FeatureCam * Demonstrated knowledge of metal finishing processes to include anodizing, painting, and powder coating. Security Clearance Requirement: An active Top Secret SCI w/Polygraph security clearance is required for this position. This position is part of our Federal Solutions team. The Federal Solutions segment delivers resources to our US government customers that ensure the success of missions around the globe. Our intelligent employees drive the state of the art as they provide services and solutions in the areas of defense, security, intelligence, infrastructure, and environmental. We promote a culture of excellence and close-knit teams that take pride in delivering, protecting, and sustaining our nation's most critical assets, from Earth to cyberspace. Throughout the company, our people are anticipating what's next to deliver the solutions our customers need now. Salary Range: $100,900.00 - $176,600.00 We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle! Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status. We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY! Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to ************************************************

USAM DC is searching for a skilled Machinist to join our team. Positions are needed for operation of Machine Centers such as CNC (router), edge bander, wide belt sander, dowel insertion machine, beam saw, table saw, case clamp and other woodworking power equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES: Operates a variety of millwork machinery including a CNC, edge bander, table saws, and more. Ability to compute basic mathematics principles including: addition, subtraction, ability to read a tape measure, and calculate fractions. Comprehends, reads, writes and speaks English; reads shop drawings/work orders and architectural drawings. Ability to multi-task, tolerate and manage changes in priorities and deadlines. Adheres to safety practices to ensure proper use of all tools and machinery. Ability to stand, move with ease, and lift 75lbs, repeatedly for duration of shift. Inspects equipment prior to use to ensure proper setup and alignment; performs basic and routine adjustments and maintenance. Maintains a clean, safe, and orderly work area. Performs other related duties as assigned. Works extended hours when workload/schedules require. QUALIFICATION REQUIREMENTS High school diploma or equivalent Associates degree or completion of technical degree highly preferred 1 plus years of millwork manufacturing experience Ability to follow directions and work well in a team Ability to interpret and translate engineering designs and documentation Excellent coordination and mechanical skills Thorough understanding of or the ability to quickly learn production equipment Strong analytical and problem-solving skills Basic math skills to include fractions Understanding of and the ability to abide by applicable OSHA and environment standards Excellent written and verbal communication skills PHYSICAL DEMANDS: Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to sit; stand; walk; use hands, handle/feel objects, tools, or controls. The employee is occasionally required to reach with hands and arms; climb or balance; stoop, kneel, or crouch. The employee must occasionally push, pull, or lift from below the waist, or lift from an overhead position and carry 75+ pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: Work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee works on or near the shop floor where there may be moving mechanical parts with occasional exposure to the risk of electrical shock, outdoor weather conditions, fumes or airborne particles, and toxic or caustic chemicals. Noise level in the work environment is usually moderate and occasionally high.

How You'll Contribute The National Geographic Society headquarters, based in Washington, D.C., is undergoing a significant renovation project on its campus (called Base Camp), which will be completed in 2026. The public-facing portion of this renovation will be the new National Geographic Museum of Exploration. Components of the new museum will include a state-of-the-art pavilion entrance, auditorium, iconic photo gallery, exhibition space, immersive walk-through attraction, retail, food and beverage, education center, archives, tours, and exciting new event space. The capstone of the renovation is a one-of-a-kind nighttime experience in the courtyard. This position supports the Exhibit Production Manager in implementing the construction, fabrication, and assembly of all Museum of Exploration and Traveling Exhibit elements. This position works closely with the Creative Team on developing, prototyping, and producing all exhibit displays. This position also works directly with Base Camp carpenters, painters, and framers to maintain all exhibit areas throughout Base Camp. The Specialist will collaborate with the traveling exhibits team by building and constructing traveling exhibit crates and refurbishing existing crates for reuse. This position will support the NG Print Lab with Museum of Exploration exhibit graphics and signage. This position reports to the Exhibit Production Manager and supports the entire Experiences division. It requires evening, weekend, holiday, and/or non-standard work hours or a shift between 8 AM and 8 PM, along with some domestic travel to support our Traveling Exhibits. Your Impact Responsibilities Include: Execute the construction, assembly, final finish, and maintenance of all exhibit elements for the Museum of Exploration and Traveling exhibits. Construct and fabricate Museum of Exploration exhibit gallery wall layouts. Fabricate Museum of Exploration and Traveling Exhibits crates. Evening/weekend work is required. (55%) Work with vendors, subcontractors (internal and external), and security on the operations needs of Museum of Exploration exhibit spaces and other programming facilities. (10%) Crate, ship, and install/de-install NGS traveling exhibits. (20%) Maintain a clean and safe work environment in the Workshop and keep the workshop up to date with tools and safety equipment. (15%) What You'll Bring Educational Background Bachelor's Degree - or relevant experience Minimum Years and Types of Experience 5+ years of fabrication/carpentry experience Necessary Knowledge and Skills Good written and oral communication Ability to effectively work with others Extensive experience and knowledge of tools and standard fabrication/carpentry practices. Tools include table saw, miter saw, panel saw, jigsaw, CNC router, nail guns, orbital sanders, planer, band saw, portable band saw, grinder, biscuit joiner, drill press, pocket screw jig, handheld router, circular saw, 2-ton mobile gantry Ability to interpret and understand build drawings Familiarity with A/V, electronic and mechanical principles and techniques Comfortable working at heights, either on a ladder or a mechanical lift Knowledge of basic rigging principles Comfortable working with heavy objects Ability to operate a forklift, scissor lift, JLG lift Fluent with Adobe Creative Suite and 3D rendering software Experience with museum standards and practices Supervision No direct report Salary Information The National Geographic Society offers a competitive and holistic total rewards package. Our compensation structure and transparent pay philosophy are based on industry-specific market data for similar-sized nonprofit organizations. The salary range for this position accounts for a wide range of factors including but not limited to organizational need; specific skill sets; experience and training; certifications; and more. At the National Geographic Society, individuals are typically hired at or near the starting point of the salary range for their role, and compensation decisions are dependent on the facts and circumstances of each case. The hourly range for this position is $31.92 - $33.60. In addition, the National Geographic Society offers a competitive and comprehensive benefits package that includes, but is not limited to, medical, dental, and vision insurance; engaging and comprehensive wellness program; 401(k) retirement savings plan with matching contributions after 6 months of employment; flexible paid time off benefits with up to 22 days of paid annual leave per calendar year (15 days for new hires in their first year, prorated based on the number of pay periods remaining in the year) and 10 days of sick leave; 12 paid holidays and a paid winter break between December 25 and 31 (May not apply to all roles that are required to work during high volume seasons or essential workers. Please check with the hiring manager for confirmation.); paid parental leave, adoption and surrogacy expense reimbursement, fertility benefits; learning and development opportunities; Lifestyle Spending Account; pet adoption assistance and insurance; pre-tax transportation benefits with a generous employer subsidy; employer-paid life insurance and disability benefit; and a variety of National Geographic discounts and perks. Job Designation Resident - Our Resident category recognizes that certain staff need to be physically present at Base Camp to do their work. Some Resident staff must be at Base Camp every day to do their jobs, while others may only need to be physically present onsite some of the time to meet looming deadlines or to get work done and may require a unique schedule. As such, this category has been revised to provide maximum flexibility depending on what's required for each individual role. The days Resident staff come into the office will be determined by their teams and workflow, and they should work with their supervisors to determine their specific schedule. And throughout the year, their schedule may be adjusted based on cyclical work cycles, deadlines, and/or ebbs and flows of work. Candidates must be legally authorized to work in the United States. This position is not eligible for visa sponsorship. W e encourage you to apply even if your experience is not a 100% match with the position. We are looking for someone with relevant skills and experience, not a checklist that exactly matches the job description. We want to help you grow and in return, you help us grow into a stronger, more inclusive organization.

Bowhead is hiring a Machinistto support the Army Research Laboratory (ARL) on Adelphi Laboratory Center (ALC) in Adelphi, Maryland. **Responsibilities** + JOB DESCRIPTION: + Perform assignments that are not completely standardized or prescribed. + Fabricate and/or modify many unique and precision items in support of the Army Research Laboratory programs. + Selects or adapts standard procedures or equipment, using fully applicable precedents. Receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed; performs recurring work independently; work is reviewed for technical adequacy or conformity with instructions. + Performs technician work of broad scope and complexity requiring the ability to interpret, select, adapt, and apply many guidelines, precedents and engineering principles and practices which relate to the area of specialization. Each assignment differs considerably from previous work and typically involves ingenuity and creative thinking to devise new ways of accomplishing objectives and in adapting existing equipment or techniques to solve the problems at hand. + Work requires practical knowledge of scientific and engineering principles, design characteristics, maintenance requirements, troubleshooting techniques, laboratory processes, and the peculiarities of various equipment and devices used. + Applies substantial judgment, initiative, skill and experience in selecting, installing and using complex instruments or devices; in modifying and adapting such instruments to obtain desired results; and in observing and noting significant trends in data. + Shall have the technical competence to work efficiently and hold very close tolerances (+/- .005 ") as a minimum for the lowest level requirement, and (+/- .0001") for higher level fabrications. + Meets with supervisor, team leader or customers to plan scope of the project, discuss objectives, plan methods for accomplishing objectives, identify potential problem areas and recommend alternatives to resolve conflicting requirements. + Identifies equipment and material needs, prepares cost estimates if required, and ensures data is within expected parameters. + Works independently, often without the availability of immediate supervisory guidance. + Keeps the supervisor advised of progress, but receives little review during progress of typical assignment. + Performs other duties as assigned. **Qualifications** + Demonstrate the ability to proficiently generate machine codes from the sketches/drawings to operate the Computer Numerically Controlled (CNC) mill and lathe to manufacture parts. + High school diploma or GED required. + Proficiency in Manual Machining prototype work. + Able to do minor welding, tig, and stick oxyacetylene. + Capable of shop related math skills. + Experience with CNC Mills and Lathes, with use of G-Code. + Work from verbal and written customer instructions to complete assignments. + Proficiency in the use of MasterCAM/ **SolidCAM** Software. + Experience with **MasterCAM/SolidCAM Software** and programming CNC machines. + Proficient in use of **HAAS milling and lathe machines,** with minimal to no assistance. + Gathers and maintains specified records of engineering data such as tests, drawings, etc. + **General knowledge and experience in welding are a plus, but not required.** This individual is authorized the use of Government tooling and equipment, both manual and CNC (i.e., hand tools, band saws, milling machines, lathes, machining centers, drill presses, brakes, punches, grinders, etc.) on-site at Government facility for required support. Physical Demands: + Must be able to lift up to 50 pounds repetitively. + Must be able to stand and walk for prolonged amounts of time. + Must be able to twist, bend and squat periodically. SECURITY CLEARANCE REQUIREMENTS: Must be able to obtain a security clearance at the Secret level. US Citizenship is a requirement for Secret clearance at this location. Applicants may be subject to a pre-employment drug & alcohol screening and/or random drug screen, and must follow UIC's Non-DOT Drug & Alcohol Testing Program requirements. If the position requires, an applicant must pass a pre-employment criminal background history check. All post-secondary education listed on the applicant's resume/application may be subject to verification. Where driving may be required or where a rental car must be obtained for business travel purposes, applicants must have a valid driver license for this position and will be subject to verification. In addition, the applicant must pass an in-house, online, driving course to be authorized to drive for company purposes. UIC is an equal opportunity employer. We evaluate qualified applicants without regard to race, age, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other protected characteristics EOE/D/V. In furtherance, pursuant to The Alaska Native Claims Settlement Act 43 U.S.C. Sec. 1601 et seq., and federal contractual requirements, UIC and its subsidiaries may legally grant certain preference in employment opportunities to UIC Shareholders and their Descendants, based on the provisions contained within The Alaska Native Claims Settlement Act. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. All candidates must apply online at ****************** and submit a completed application for all positions they wish to be considered. Once the employment application has been completed and submitted, any changes to the application after submission may not be reviewed. Please contact a UIC HR Recruiter if you have made a significant change to your application. In accordance with the Americans with Disabilities Act of 1990 (ADA), persons unable to complete an online application should contact UIC Human Resources for assistance (******************************************** The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) UIC Government Services (UICGS / Bowhead) provides innovative business solutions to federal and commercial customers in the areas of engineering, maintenance services, information technology, program support, logistics/base support, and procurement. Collectively, the fast-growing Bowhead Family of Companies offers a breadth of services which are performed with a focus on quality results. Headquartered in Springfield, VA, we are a fast-growing, multi-million-dollar company recognized as a top Alaska Native Corporation providing services across the Department of Defense and many federal agencies. Bowhead offers competitive benefits including medical, dental, vision, life insurance, accidental death and dismemberment, short/long-term disability, and 401(k) retirement plans as well as a paid time off programs for eligible full-time employees. Eligible part-time employees are able to participate in the 401(k) retirement plans and state or contract required paid time off programs. **Join our Talent Community!** Join our Talent Community (************************************************************************ to receive updates on new opportunities and future events. **ID** _2025-24256_ **Category** _Engineering_ **Location : Location** _US-MD-Adelphi_ **SCA Hourly Rate** _USD $34.31/Hr._ **Clearance Level Must Be Able to Obtain** _Secret_ **Minimum Clearance Required** _Secret_ **Travel Requirement** _N/A_

Job DescriptionSalary: $29.50-42.00 Internal Code: CNC5 Reports to: Operations Manager MATSYS, Inc. is seeking a CNC Machinist to join its team of high-performing scientists, engineers, and technicians at its Sterling, VA facility. The CNC Machinist is responsible for setting up and operating CNC machines to produce high-quality precision components according to engineering drawings and specifications. This role requires hands-on machining expertise, strong attention to detail, and the ability to maintain tooling, equipment, and process documentation to meet tight tolerances, deadlines, and customer requirements, often in support of defense projects. If you are looking to join a rapidly growing company that offers a dynamic, fast-paced, solution-driven work environment, MATSYS is the place for you! This position is expected to be primarily assigned to our research and development facility (6 am-2:30 pm, Monday Friday), but the candidate should be flexible and willing to cross-train in our production environment (6 am-4:30 pm, Monday Thursday), as well. The successful candidate will be hired as a Machinist II or III based on experience and skillset. Description Set up and and operate CNC mills and lathes to produce precision parts Interpret engineering blueprints, technical drawings, and work orders to ensure parts meet tolerances and quality standards Perform machine offsets, tool changes, and adjustments as necessary Inspect parts using calipers, micrometers, and gauges Troubleshoot machining programs and processes Maintain machine tools, cutting equipment, and workstations in a clean and safe condition Complete documentation such as job travelers, inspection reports, and nonconformance records Collaborate with engineers and others to improve machining processes and implement lean manufacturing practices Follow all company compliance requirements Other duties as assigned Required Must be a U.S. citizen due to government contract requirements High School diploma or equivalent 3+ years of experience operating CNC machines in a precision (metal part) manufacturing environment (aerospace or defense experience desirable) Proficiency with precision measuring instruments (micrometers, calipers, height gauges, bore gauges, etc.) Ability to read and interpret GD&T (Geometric Dimensioning & Tolerancing) Basic program editing experience Ability to follow standard operating procedures (SOPs) and safety guidelines Working Conditions: Standing, walking, lifting/maneuvering up to 50 lbs. Frequent exposure to powders, dust, lubricants, and manufacturing equipment Use of PPE such as gloves, masks, safety shoes, and protective eyewear. Preferred 2-year degree, technical certification, apprenticeship or equivalent Experience with 5-axis mills Experience operating wire EDM machines Experience programming with CAD/CAM software (MasterCam preferred) Familiarity with ISO 9001 quality systems Competencies Work Execution & Excellence: efficient planning & quality execution, ability to meet deliverables & deadlines, drive towards excellence Communication & Team Impact: effective & quality communication ability, ability to effectively share technical information, as well as accountability and a team player commitment Technical Expertise & Development: continual learning and commitment to cross-training, strong hands-on mechanical skills Autonomy, Judgment & Decision-Making: Sound judgment and planning ability, risk assessment skills, creativity & critical problem-solving Commitment to MATSYS core values and ideals: Safety: Safety is at the forefront of our decision-making. We hold each other responsible to ensure the health and safety of our team at all times. Quality: We stake our reputation on our impeccable standards. We provide the utmost quality in everything that we do and deliver above expectations, both as individuals and as a team. Integrity: We are accountable, transparent, and act with respect and in the best interests of our customers, communities, and employees. Teamwork: Good ideas come from everyone and great ideas come from us working together. Impact: We are responsive and effect positive and ground-breaking change, delivering excellence every step of the way. About MATSYS Inc. As a frontrunner in next-generation materials and manufacturing processes, MATSYS excels in developing advanced materials and manufacturing processes, setting itself apart through innovation and problem-solving. With a culture built on collaboration, transparency, and excellence, we prioritize client satisfaction through open communication and integrity, fostering enduring partnerships. Our teams diverse skills in material development, powder processing, and design fabrication enable us to deliver comprehensive solutions to complex problems. Our future vision includes expanding production capabilities, establishing strategic integrations with industry leaders, and driving continuous innovation and growth. MATSYS prides itself on its dynamic team, its ability to push boundaries and the commitment of its employees to excellence, innovation and teamwork. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (male or female), national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by applicable law. Employment decisions are based solely on merit, qualifications, and business needsnever on protected characteristics. MATSYS uses E-Verify to verify right-to-work. MATSYS is a Drug-Free Workplace. Candidates are required to pass a pre-employment background investigation and drug test prior following receipt of a conditional job offer.

Job DescriptionSalary: $22/hr - $50.40/hr Primus Aerospace is a leading manufacturing partner to aerospace, defense, and space OEMs, Primes, and Tier I suppliers. The company specializes in producing high-tolerance, complex geometry parts machined using standard and exotic metals. Primus works directly with all major aerospace manufacturers (e.g., Boeing, Lockheed Martin, Northrop Grumman) to provide components for mission-critical civilian and defense programs. 1st Shift: M-Th 6am - 4:30pm, base pay 2nd Shift: M-Th 3:30pm - 2:00am, base pay plus 20% shift differential 3rd Shift:F,S,S 6am - 6:30pm, paid full 40hrs for 36hrs worked Machinist I* - $22/hr - $30/hr Machinist II* - $25/hr - $40/hr Setup Machinist* - $28/hr - $42/hr *position level will be assessed through the resume review and interview process. Pay rates are listed at base pay rate* Key Responsibilities Previous CNC Operator experience: mill turn and lathe GD&T print reading Knowledge of calipers, micrometers, metrology. Ability to indicate vices. Coordinate x, y, z Knowledge of machining principles. Operate CNC machines from provided work instructions from work order or set up personnel Verifying dimensional characteristics of parts Meet expected cycle times and production schedule Completion of all required paperwork in a timely manner Requirements Previous CNC Operator experience or technical school course work completed 3 years experience with machine set-ups (for Setup Machinist level) Reading blueprints and using hand tools Prioritizing tasks and maintaining production goals Self-starter with a good attitude Attention to detail and a strong desire to produce quality products Experience in a manufacturing environment utilizing lean manufacturing techniques is preferred Previous experience in Aerospace or defense machining environment preferred. We offer comprehensive benefits for full-time employees including: PTO 10 paid holidays Medical, Dental, Vision, Short- and Long-term disability insurance 401K match Long and short-term incentive plans Benefits start 1st of the month after date of hire To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen. At Primus Aerospace, we are proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment that supports, respects, and celebrates all individuals. #zr #cr

Job description: Company Description: Our long term client is a growing manufacturing company specializing in precision machining and fabrication. They are currently seeking an experienced CNC Machinist (Mills & Lathes) to join their team. If you are a skilled professional with a strong background in CNC machining, blueprint reading, and setup operations, we want to hear from you! Position Overview: As a CNC Machinist (Mills & Lathes), you will play a crucial role in producing high-quality machined components for a variety of industries such as the aerospace, automotive and medical device industries that require tight tolerance machining. You will be responsible for setting up, and operating CNC machines (Mills & Lathes), interpreting blueprints, adjusting tooling, making offsets, and using precision measurement tools to ensure the accuracy of the final products. Your expertise will contribute to the success of their operations. Key Responsibilities: Set up, operate, and (edit when needed) Fanuc controlled - CNC Mills & Lathes (machining OR turning) in accordance with production specifications. 2 to 4 axis machines. (5 axis mills experience definite plus!) Read and interpret blueprints and engineering drawings to ensure the accurate machining of components. Upload programs and make necessary adjustments (G&M code edits) to machine parameters. Select and install appropriate tooling and make tooling offsets as needed. Perform routine maintenance and troubleshooting on CNC machines. Conduct First Article Inspection (FAI) using tools such as: Vernier calipers, Dial calipers, Digital calipers, Micrometers, Bore micrometers, Depth micrometers, Optical Comparators, to measure and inspect parts to meet precise specifications. Monitor and maintain quality control throughout the machining process. Maintain a clean and organized workspace. Qualifications: Minimum of 5 years of CNC machining experience. Minimum 3yrs proficiency in setting up and operating CNC machines. Strong blueprint reading skills. Ability to read and understand G & M codes - Fanuc control. Knowledge of tool selection, tooling setup, and making tool offsets. Proficiency in using metrology tools (operating a CMM experience is a plus!) Strong attention to detail and commitment to producing high-quality work. Strong problem-solving skills and the ability to troubleshoot machine issues. Good communication skills and the ability to work effectively in a team. Willingness to work with a safety-first mindset. Hours/Shifts: 1st Shift Mon-Fri. 7:00am to 3:30pm Overtime available Benefits: Health Insurance - Single or Family 401k with Company Match Holiday Bonuses Performance bonuses Possible tuition reimbursement Salary Range: $25hr-$37hr (OR) $52-80K DOE

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world's recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech's family of companies touches 90% of the world's fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing - we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. Perform full setups on CNC mills and/or lathes from print or model - including indicating vises, fixtures, and part zeros. Interpret complex blueprints, GD&T, and 3D models to execute machining strategies. Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency. Troubleshoot issues related to tooling, setup, and part accuracy independently. Ensure in-process inspection and first article inspection compliance. Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts. Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets. Strong understanding of machine offsets, tool presetting, and basic G/M code. Experience with multi-axis machining or live tooling. Strong understanding of machining processes and techniques. Proficient in reading and interpreting blueprints and technical drawings. Familiar with the use of precision measuring instruments like micrometers and calipers. Solid understanding of lean manufacturing At least 5 years of relevant experience in machining manufacturing. We offer competitive pay, a benefits package, and opportunities for career growth. Benefits and Compensation Two medical plans (PPO & HSA), dental, and vision insurance Paid time off, Vacation, and eight Holidays Employee assistance program (EAP) 401k Profit sharing Free Life Free AD&D Free Disability insurance (Shot and Long-Term Disability) Tuition Assistance Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

In this role you will operate, clean, and maintain various machining equipment including lathes, mills, 3-axis machines, 5-axis machines and other equipment to make precise parts, ensure efficient operations, and achieve high utilization. At ADDMAN, you'll be part of a skilled and growing team serving the defense, space and commercial aerospace industries. This position is for B shift hours are 3pm- 11pm. ESSENTIAL JOB FUNCTIONS: Always has safety first in mind when working at ADDMAN, uses all personal protective equipment as required. Ensures all equipment and forklifts are functioning per design and function. Shuts down equipment and stops operations in unsafe conditions, lockout/tagout when necessary. Utilizes work instructions, set-up sheets and method documents to correctly operate machines and inspect machined parts. Reads and interprets all drawings, including geometric dimensioning and tolerancing. Accurately reads and records information (i. e. material manufacture date, number of parts produced, and other criteria) that is critical to the production process. Follows instruction from a traveler/router and machining procedures to perform the machining process. Operates various equipment and makes various parts to precise specifications utilizing knowledge of metal properties, set ups, layouts, and precision machining procedures. Ability to read and understand sketches, blueprints and thorough understanding of tools and proper use of fixtures. May set up, or learn to set up, and run CNC or manual machinery. Adjust controls to vary the depth of cut, RPM and rate of feed efficiently. Updates inventory systems for usage and scrap and prepares Material Tags for non-conforming parts. Capable of following detailed manufacturing processes to produce high-tolerance parts. Adheres to the AS9100 and ISO 9000 standards and complies with internal Quality Management System (QMS) standards. Utilizes various gauging equipment to ensure conformance to the engineering specifications and standards through the production run i.e. calipers, micrometers, gage pins height gages, dial indicators and precision scales. Maintains an accurate count and record production pieces and hours of production. Performs housekeeping and cleanup duties upon completion of assigned tasks. Actively participates in housekeeping and 5S efforts by maintaining an orderly, clean, and safe work area. Keeps equipment and product free of FOD, Foreign Object Debris. Promotes teamwork within the organization. Follows all Company Human Resources policies and process procedures. Performs other duties as assigned. Requirements ITAR REQUIREMENTS: This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person citizenship status. SKILL REQUIREMENTS: Able to work in a dynamic environment with changing priorities to exceed customer expectations Works independently, strong work ethic, is self-motivated and able to complete tasks with minimal supervision Ability to work on cross-functional teams to support the core business, ensuring quality products are delivered on time Computer aptitude (Outlook, PowerPoint, Word and Excel) Ability to read, write, and communicate in the English language Must be a team player and willing to learn new skills and concepts QUALIFICATIONS: Previous experience in machining and with quality processes is desired Some exposure and experience with manufacturing /CNC machining processes Understand continuous improvement or lean / six sigma principles Graduate of related two-year vocational school program and three years related work experience and/or training; or equivalent combination of education and experience Eligible to work in the United States without company sponsorship WORK ENVIRONMENT: The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment. For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility. PHYSICAL DEMANDS: Sit or stand as needed. Walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday. Proper lifting techniques required. Ability and comfortability to work in small confine spaces while following proper safety protocol. SAFETY AND POLICY PRACTICES: Each employee must be knowledgeable of standard safety policies and procedures and adhere to the same while supporting the goals and objectives of the organization and recognizing the Company's need to achieve its business objectives. Each employee is responsible for complying with company hazardous waste disposal procedures. AFFIRMATIVE ACTION: ADDMAN Engineering is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities. All terms and conditions of employment will be administered without regard to an individual's sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. NOTE: This is intended to describe the general level of work being performed. This is not intended to be all-inclusive. The duties of this position may change from time to time, and the employee may perform other related duties to meet the ongoing needs of the organization. ADDMAN Engineering reserves the right to add, delete or modify these duties and responsibilities at its discretion. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Employment is at-will, and nothing in this job description is intended to create or imply a contractual relationship or alter the at-will status of the employee. Salary Description $23 -$28 / Per hour

Filamatic is an OEM of industrial liquid filling and packaging machinery and has a great opportunity for a CNC Machinist to join our organization. In this role you will support the team by manufacturing parts and tooling on a variety of industrial machines using blueprints, sketches and or verbal direction to make sure our production team has the needed parts to build the machinery within the target deadlines and specifications. In addition, you will be working closely with our sales team to fulfill our continual orders of spare parts for our customers. As a CNC Machinist you will follow standard departmental procedures to manufacture various parts and assemblies for machines according to specifications - ensuring work orders are completed on time and meeting our high-quality standards. As a Machinist you must be able to read and work from blueprints as well as set up and operate a variety of CNC Machinery including mills and lathes. You should also be able to work with CAD/CAM programming systems. Responsibilities Set up and operate various equipment and CNC machinery including lathes, milling machines, grinder, and more to minimize downtime and errors in parts production. Manufacture parts on various machines from blueprints, sketches, and verbal instructions to meet/expedite delivery and ensure quality production. Design fixtures, tooling, and parts to meet machining requirements. Measure and examine completed parts to ensure it meets specifications using precision measuring instruments. Ability to work with CAD/CAM programming systems. Work schedule: First Shift Monday - Friday 40 hours per week. We have some flexibility in start time; we want consistency in the schedule though. Typically starting between 6:00 am and 8:00 am and then working an 8.5-hour schedule to accommodate for a 30-minute lunch. Qualifications Ability to read drawings, schematics, sketches and understand oral instructions. Good understanding of all machine shop principles. Thorough knowledge of cutting tools such as end mills, boring bars, drills, taps, slitting saws, and turning tools / inserts. Ability to edit and troubleshoot programs using G-code. Ability to set up and operate CNC lathes and CNC machining centers. Proficient in use of precision measuring tools such as calipers, micrometers, scales, indicators, etc. Sound basic math skills including algebra, geometry, and trigonometry. Ability to interpret technician drawings and geometric drawings. Ability to set up and operate a full range of machines and equipment in accordance with safety protocols. Ability to measure (where and how) using proper tools. Proficiency in use of CAD/CAM software. High school diploma or equivalent required. Physical Requirements Job requires standing, working with hands and lifting up to 50 pounds 25% of the time; walking, sitting, talking/hearing, climbing/balancing, stooping, kneeling, crouching or crawling; reaching with hands or arms. Environmental Conditions Job works near/with moving mechanical parts and machine shop equipment more than 75% of the time; sharp edges/parts and emission of liquid approximately 50% of the time. Noise level is for a typical of machine shops. Compensation and Benefits Salary Range: $25.00 - $33.00 per hour Benefits: Excellent benefits package that allows you to accrue 2 weeks of annual vacation, 10 paid holidays, 401K, Parental Leave, Medical (3 different plan options), Dental, Vision, among some of our benefit offerings. Eligibility for insurance and 401K is the first of the month following 30 days of employment. About Us Filamatic, a division of National Instrument, LLC, is a leading manufacturer of industrial packaging machinery for the Pharmaceutical, Biotech, Diagnostic and Cannabis Industries. Our success over the last 70 years is attributable to exceeding customer expectations by providing products and services which offer a superior value proposition, creating a great working environment for our employees, hiring exceptionally qualified staff, and driving continuous process improvement. Our Values represent the lens we use when making decisions that impact the company, employees, and our customers. Each person we add to our organization should reinforce these values. We seek out individuals who support/embrace these values. Filamatic core values are: Adherence to the Golden Rule, Continuous Improvement, Customer Centric, Takes Ownership, Persistence, Courage to be Curious, Resilient Mindset, and Practical Excellence. To learn more about the exciting work of Filamatic, please visit our website at ***************** and check out our capabilities on our YouTube video: ***************************** Employment opportunities are contingent on successfully completing a background check, drug test and physical as applicable based on the position. Equal Opportunity Employer National Instrument dba Filamatic is an equal opportunity employer. National Instrument dba Filamatic does not discriminate in employment with regard to actual or perceived race, color, creed, religion, national origin, citizenship status, ancestry, age, sex or gender(including pregnancy, childbirth, related medical conditions and lactation), gender identity or expression (including transgender status), sexual orientation, marital status, military service or veteran status, disability, protected medical condition as defined by applicable state or local law, genetic information or any other characteristic protected by applicable federal, state or local laws and ordinances.

About Us: BW Papersystems, part of the Barry-Wehmiller Group, builds capital equipment that transforms paper into products for consumers - every day, around the world. We offer innovative technologies, service and parts, and years of global experience in corrugating, finishing; slitting and packaging; stationery; bookbinding and security documents. Customers rely on our machines to produce and convert items such as corrugated boxes, folding cartons, passports, notebooks, copy paper, board, and coated and other specialty papers. For more information, visit bwpapersystems.com. Barry-Wehmiller is a diversified global supplier of engineering consulting and manufacturing technology for the packaging, corrugating, sheeting and paper-converting industries. By blending people-centric leadership with disciplined operational strategies and purpose-driven growth, Barry-Wehmiller has become a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world. Job Description: BW Papersystems is seeking a CNC Machinist to join our team! BW Papersystems is searching for a CNC Machinist that can perform a range of rough and finish turning, drilling, tapping, boring, facing, recessing, thread cutting and similar machining operations on a variety of shafts, housings heads, and parts of various ferrous and non-ferrous metals and alloys. In this role you will machine parts to specifications using manual and CNC machine tools such as mills, lathes, saws, and grinders. Key Responsibilities: Select the appropriate tools, machines, and materials to be used in preparation of machinery work. Perform a range of rough and finish turning, drilling, tapping, boring, facing, recessing, thread cutting and similar machining operations on a variety of shafts, housings, heads, and parts of various ferrous and non-ferrous metals and alloys. Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines. Use GD&T principles to interpret and analyze blueprints, schematics, and technical drawings to ensure accurate implementation of standard processes. Use mathematical knowledge to calculate location and positioning of features. Edit programs, set up, adjust, and operate basic machine tools, and many specialized or advanced machine tools to perform precision machining operations. Monitor the feed and speed of machines during the machining process and perform quality control checks of critical features. Measure, examine, and test completed units to detect defects and ensure conformance to specifications using precision instruments like micrometers, dial bore gauges, and calipers. Maintain clean and orderly work areas and equipment, report and correct and unsafe work practices or conditions immediately. Perform all work in accordance with established safety procedures. Multi-task various duties throughout the day; maintain a positive attitude with versatility and flexibility. Communicate and interact with various teams and teammates to solve problems independently. Basic Qualifications & Requirements: High School Diploma or GED equivalent 2+ years of experience working in a machine shop environment. The approximate pay range for this position is $23/HR - $30/HR. Please note that the pay range provided is a good faith estimate for the position at the time of posting. Final compensation may vary based on factors including but not limited to background, knowledge, skills, and abilities as well as geographic location of the position. #LI-JK2 At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. Barry-Wehmiller is an equal opportunity employer. M/F/D/V This organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. Company: BW Papersystems

Tool & Die Maker for a temp to perm opportunity in our tool room. Performs machining operations on a variety of machines to make parts to specification. Design, build and assemble jigs, fixtures, gauges and machines with pneumatic and hydraulics. Develop skills in die preventative maintenance, repair, design and build. • High School Diploma/GED required. Associate's degree or equivalent from a four-year college or technical school, completion of a four year apprenticeship program or equivalent combination of education and experience. Minimum 3 years working in a tool & die machinist role building parts from drawings.

+ As a CNC Machinist, you will generate programs for 3 and 5 axis routers, mills, and other machining centers + You will design and develop tooling and machining fixtures, read and comprehend work orders, production instructions, 2D prints, and 3D models + You will track and document all revisions to product drawings and tooling, and partner with engineering and sales teams to ensure parts meet customer specifications + You will provide feedback to management on potential risks, possible improvements, and problem resolution + Your role will ensure all projects and parts comply with required specifications and meet quality standards **Responsibilities** + Precisely machine parts to specifications using machine tools such as CNC mills, and 3 and 5 axis routers, including Haas and DMS + Accurately calculate dimensions and tolerances using mathematics and measuring instruments like gauges, calipers, and micrometers + Complete machine setups to meet part specifications + Monitor the feed and speed of machines during the machining process + Ensure that materials and molds meet quality standards and are production-ready + Assist with machine maintenance and adhere to maintenance schedules **Essential Skills** + Knowledge of MasterCAM and SolidWorks + Proficiency with CAD/CAM systems + Ability to perform job responsibilities using safe and proper techniques in accordance with company standards + Ability to consistently achieve productivity standards + Compliance with all health and safety regulations **Qualified candidates are encouraged to apply to this posting directly.** **Job Type & Location** This is a Contract to Hire position based out of Dundalk, MD. **Pay and Benefits** The pay range for this position is $30.00 - $39.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Dundalk,MD. **Application Deadline** This position is anticipated to close on Dec 12, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

In this role you will operate, clean, and maintain various machining equipment including lathes, mills, 3\-axis machines, 5\-axis machines and other equipment to make precise parts, ensure efficient operations, and achieve high utilization. At ADDMAN, you'll be part of a skilled and growing team serving the defense, space and commercial aerospace industries. This position is for B shift hours are 3pm\- 11pm. ESSENTIAL JOB FUNCTIONS: Always has safety first in mind when working at ADDMAN, uses all personal protective equipment as required. Ensures all equipment and forklifts are functioning per design and function. Shuts down equipment and stops operations in unsafe conditions, lockout\/tagout when necessary. Utilizes work instructions, set\-up sheets and method documents to correctly operate machines and inspect machined parts. Reads and interprets all drawings, including geometric dimensioning and tolerancing. Accurately reads and records information (i. e. material manufacture date, number of parts produced, and other criteria) that is critical to the production process. Follows instruction from a traveler\/router and machining procedures to perform the machining process. Operates various equipment and makes various parts to precise specifications utilizing knowledge of metal properties, set ups, layouts, and precision machining procedures. Ability to read and understand sketches, blueprints and thorough understanding of tools and proper use of fixtures. May set up, or learn to set up, and run CNC or manual machinery. Adjust controls to vary the depth of cut, RPM and rate of feed efficiently. Updates inventory systems for usage and scrap and prepares Material Tags for non\-conforming parts. Capable of following detailed manufacturing processes to produce high\-tolerance parts. Adheres to the AS9100 and ISO 9000 standards and complies with internal Quality Management System (QMS) standards. Utilizes various gauging equipment to ensure conformance to the engineering specifications and standards through the production run i.e. calipers, micrometers, gage pins height gages, dial indicators and precision scales. Maintains an accurate count and record production pieces and hours of production. Performs housekeeping and cleanup duties upon completion of assigned tasks. Actively participates in housekeeping and 5S efforts by maintaining an orderly, clean, and safe work area. Keeps equipment and product free of FOD, Foreign Object Debris. Promotes teamwork within the organization. Follows all Company Human Resources policies and process procedures. Performs other duties as assigned. Requirements ITAR REQUIREMENTS: This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person citizenship status. Requirements Able to work in a dynamic environment with changing priorities to exceed customer expectations Works independently, strong work ethic, is self\-motivated and able to complete tasks with minimal supervision Ability to work on cross\-functional teams to support the core business, ensuring quality products are delivered on time Computer aptitude (Outlook, PowerPoint, Word and Excel) Ability to read, write, and communicate in the English language Must be a team player and willing to learn new skills and concepts QUALIFICATIONS: Previous experience in machining and with quality processes is desired Some exposure and experience with manufacturing \/CNC machining processes Understand continuous improvement or lean \/ six sigma principles Graduate of related two\-year vocational school program and three years related work experience and\/or training; or equivalent combination of education and experience Eligible to work in the United States without company sponsorship WORK ENVIRONMENT: The performance of this position will require exposure to the manufacturing areas where all areas require the use of personal protective equipment such as safety glasses, hearing protection, steel toe shops, and other mandatory safety equipment. For the most part, ambient temperatures with typical plant lighting and manufacturing equipment are present throughout the facility. PHYSICAL DEMANDS: Sit or stand as needed. Walking primarily on a level surface for periodic periods throughout the day. Reaching above shoulder height, below the waist, or lifting as required to reach documents or store materials throughout the workday. Proper lifting techniques required. Ability and comfortability to work in small confine spaces while following proper safety protocol. SAFETY AND POLICY PRACTICES: Each employee must be knowledgeable of standard safety policies and procedures and adhere to the same while supporting the goals and objectives of the organization and recognizing the Company's need to achieve its business objectives. Each employee is responsible for complying with company hazardous waste disposal procedures. AFFIRMATIVE ACTION: ADDMAN Engineering is proud to be an Equal Opportunity Employer of Minorities, Women, Protected Veterans, and Individuals with Disabilities. All terms and conditions of employment will be administered without regard to an individual's sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable law. NOTE: This is intended to describe the general level of work being performed. This is not intended to be all\-inclusive. The duties of this position may change from time to time, and the employee may perform other related duties to meet the ongoing needs of the organization. ADDMAN Engineering reserves the right to add, delete or modify these duties and responsibilities at its discretion. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Employment is at\-will, and nothing in this job description is intended to create or imply a contractual relationship or alter the at\-will status of the employee. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"667294733","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"City","uitype":1,"value":"Glen Burnie"},{"field Label":"State\/Province","uitype":1,"value":"Maryland"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"21060"},{"field Label":"Salary","uitype":1,"value":"23.00"}],"header Name":"CNC Machinist II\-B Shift","widget Id":"4**********0072311","awli IntegId":"urn:li:organization:18758749","is JobBoard":"false","user Id":"4**********1692017","attach Arr":[],"awli ApiKey":"86ezhi1yg2oktx","custom Template":"3","awli HashKey":"c21b16e3c8dbe9654eb55b1f04069e03d572626405c07f472ea90a39cdba9a8**********8097028c357acddf7e325374edf16ca 4013eb8708eaa9f0dbef6a35","is CandidateLoginEnabled":true,"job Id":"4**********5078885","FontSize":"12","google IndexUrl":"https:\/\/lucasjamestalent.zohorecruit.com\/recruit\/ViewJob.na?digest=Nyi9VFWIsbMXNaN0qju4ExnqFgCWB6snf.Rr8WJbtro\-&embedsource=Google","location":"Glen Burnie","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"pcy573a2da6bcad414975813a806bd9435355"}

SUMMARY: A CNC Machinist is responsible for operating one or more types of computer numeric controlled production equipment. Selects appropriate settings and makes adjustments as necessary. Commitment to and support of the Company Core Values are key to success in this position. ESSENTIAL DUTIES AND RESPONSIBILITIES: Verify that material and paperwork for the job being performed is correct Plan machining in accordance with all blueprints and hard copy and electronic technical data and specifications, applying geometric dimensioning and tolerances as required Set-up mills by adjusting all necessary fixturing and machine attachments; setting and applying tool and machine reference points and offsets and calculating requirements using basic math, geometry, and trigonometry Check stock and load and unload the machine Create an in-process inspection report for each operation, as necessary, if one does not exist Identify non-conformance, if discovered, notify your supervisor so that it can be documented identified, dispositioned, and segregated from the remainder of the lot Verify that there are no chips on either the jaws/fixture or on the part/material to be machined. Load the part/material, verify that the part is properly seated in the fixture/jaws, snug against any stop pins prior to clamping or tightening of the jaws Identify discrepant material left in your work area, notify your supervisor so that it can be dispositioned and segregated. Follow all quality procedures, work instructions, and documents pertaining to your job and department. Identify any problems/issues while running an operation, notify the supervisor immediately Responsible for keeping the machine and the immediate area clean Monitor coolant levels Clean the chips from machine at the end of shift, or when the job is finished Verify that all company and personal inspection equipment and tools being used are in calibration. Adhere to all company safety policies including the use of eye and ear protection. Perform all functions of the job while adhering to established quality policies and procedures Uphold the company core values Other duties as assigned SUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Successful accomplishment of duties and responsibilities may require the following: Must be able to operate the various machines within the department with minimal instruction. Must be capable of reading drawings and be able to inspect the parts they are machining. Must be capable of working with minimal supervision. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or 2 years experience; or equivalent combination of education and experience.0 LANGUAGE SKILLS: Ability to speak and understand basic safety and manufacturing instructions. MATHEMATICAL SKILLS: Ability to add and subtract two-digit numbers. Ability to multiply and divide with 10's and 100's. REASONING ABILITY Prioritize activities and work under pressures at all times. Comply with safety standard procedures Be able to differentiate between a symptom and a root of the problem Open to change and improvements Maintain clean and organized workspace CERTIFICATES, LICENSES, REGISTRATIONS: Authorization to work in the United States. To conform to U.S. export control regulations, you should be eligible for any required authorizations from the U.S. Government. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and hear. The employee frequently is required to use hands and fingers; handle, feel, and reach with hands and arms. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl; and smell. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly exposed to moving mechanical parts. The employee may be exposed to hot and/or cold work environment, chemicals, fumes or airborne particles, loud noises, risk of electrical shock and vibration low and high temperatures and/or other occupational hazards; personal protective equipment may be required. NOTE: This identifies the general nature and scope of work to be performed. Vitesse Systems, LLC. reserves the right to revise all or any part of this and to add or eliminate essential job functions at any time. Designation of any job duty as an essential function is not intended as an assurance or guarantee that a team member has any right to perform the job duty, except as required by Vitesse Systems, LLC. This job description is subject to change based on the needs of the position and/or the Company. Vitesse Systems, LLC performs work controlled by the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). These statutes require the protection of technical data and products. The regulations require that such data not be disclosed in written, oral, or visual form to any foreign national without prior export authorization from the Department of State. A foreign national is defined by the U.S. Government under EAR 734.2(b)(2)(ii) and 8 USC 110 (a)(20) as one who: Is not a United States citizen Is not lawfully admitted for permanent residence in the U.S. Does not have politically protected status (embassy, refugee, or asylum) Has dual U.S. / foreign citizenship Vitesse Systems, LLC. is an Equal Employment Opportunity / Affirmative Action (EEO/AA) Veterans / Disabled Employer

SUMMARY: A CNC Machinist is responsible for operating one or more types of computer numeric controlled production equipment. Selects appropriate settings and makes adjustments as necessary. Commitment to and support of the Company Core Values are key to success in this position. ESSENTIAL DUTIES AND RESPONSIBILITIES: Verify that material and paperwork for the job being performed is correct Plan machining in accordance with all blueprints and hard copy and electronic technical data and specifications, applying geometric dimensioning and tolerances as required Set-up mills by adjusting all necessary fixturing and machine attachments; setting and applying tool and machine reference points and offsets and calculating requirements using basic math, geometry, and trigonometry Check stock and load and unload the machine Create an in-process inspection report for each operation, as necessary, if one does not exist Identify non-conformance, if discovered, notify your supervisor so that it can be documented identified, dispositioned, and segregated from the remainder of the lot Verify that there are no chips on either the jaws/fixture or on the part/material to be machined. Load the part/material, verify that the part is properly seated in the fixture/jaws, snug against any stop pins prior to clamping or tightening of the jaws Identify discrepant material left in your work area, notify your supervisor so that it can be dispositioned and segregated. Follow all quality procedures, work instructions, and documents pertaining to your job and department. Identify any problems/issues while running an operation, notify the supervisor immediately Responsible for keeping the machine and the immediate area clean Monitor coolant levels Clean the chips from machine at the end of shift, or when the job is finished Verify that all company and personal inspection equipment and tools being used are in calibration.

Responsibilities: 1. Program software to run CNC Machine. 2. Set-up and Machine Aluminum Housings and Covers for day and night runs. 3. Clean and deburr all finished parts. 4. Inspect finished parts for dimensional tolerances to drawing specifications. 5. Maintain CNC Machine at all times. 6. Operate Manual Drill Press, Band saw, and Grinder as required. 7. Painting of Finished Hardware using Military Grade Epoxy Paint 8. Maintenance of CNC Equipment, Manual Machines and Tools 9. Keep Machine Shop clean at all times. Qualifications: 1. Must have proficient Desktop Computer skills. 2. Able to read & understand Mechanical Drawings, Dimensions and Tolerances. 3. Understanding of Feed Rates for End Mills and Drills. 4. Detail oriented and can work with minimal supervision. 5. Multitasker (able to keep several processes running at once). 6. Experience using CNC Milling and G-Code preferred (willing to train). 7. Experience programming HAAS CNC using GibbsCAM preferred (willing to train). 8. Experience in AutoCAD preferred. 9. Experience in SolidWorks a plus. Education: High School Diploma, College Preferred Experience: 1 - 3 years Job Type: Full Time