Machinist jobs in Springfield, VA

The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the “Best Value” supplier in the industry. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Interprets drawings to visualize final form of die, part or tool, and plans sequence of operations to achieve desired end result Works from prints, sketches, verbal or written instructions, or from existing part to be copied or fitted Lifts, positions, and secures parts to be machined on surface plate or worktable, using hoist, vises, v-blocks, or angle plates Sets up and operates machine tools such as CNC mills and lathes, manual mills and lathes, CNC and manual grinders, wire EDM, saw Plans the set up and operation of machine shop tools considering types of material, tolerances, types of cutting tools, coolants, lubricants, and machine tool feeds and speeds Programs mills and lathes using conversational programming and/or CAM by entering instructions including setting zero and reference points, tool registers, tool offsets, geometry of part, etc. Verifies dimensions, alignments, and clearances of finished parts, using measuring instruments such as CMM, calipers, micrometers, height gages, dial indicators, and gage blocks Fits and assembles jigs, fixtures, tools and dies, using wrenches, hammers, arbor or hydraulic presses Troubleshoots poor performing tools, identifying deficiencies and suggesting improvements Designs jigs, fixtures, or templates for use as work aides Inventories, requests, and investigates alternative cutting tools and shop supplies Promptly and accurately completes all required recordkeeping and inspections Performs routine machine maintenance as assigned Other tasks, projects and functions as assigned. Requirements: High school diploma or equivalent preferred; equivalent relevant experience may be considered Trade school or Apprenticeship program preferred Exhibits in-depth job knowledge and skills Adjusts machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is not optimum Develop CNC machining processes by selecting the chucking device, cutting tools, tool arrangement, and cutting speeds and feeds with emphasis on standardization Create and maintain CNC programs to produce parts using CAD/CAM software. Experience utilizing GibbsCAM, MasterCAM, Fusion 360, Edgecam, Partmaker, or Esprit is a plus Thorough understanding of workholding, datums, sequence of operations, tool selection Can prioritize the work and coordinate with others Capable of fostering a team environment Self-motivated and can work with little supervision Thinks, plans, and responds quickly to unexpected events Able to multi-task in a fast-paced environment with changing priorities Active participant in troubleshooting and problem solving Capable of running multiple machines while they are in automatic cycles Basic Windows operating system navigation, Basic Microsoft Office Suite, CAM software experience preferred Math skills up to basic trigonometry (addition, subtraction, multiplication, division, finding an angle or tangent) Mechanical aptitude to understand how processes operate Technical skills and experience to solve complex problems and troubleshoot Analytical and critical thinking skills to foresee issues with designs or processes and come up with alternate solutions Attention to detail to ensure the highest level of precision in finished work Time management and having a sense of urgency for the jobs at hand Ability to work with others in a fast-paced manufacturing setting Learn more about U.S. Tsubaki at: U.S. Tsubaki offers: A competitive compensation package, including health benefits effective on date of hire, generous 401(k) match and profit sharing, education reimbursement, and annual bonus potential Paid time off (“PTO”) 90-day and 180-day performance reviews Shift differential pay for 2nd and 3rd shift Weekly bonus potential Paid training Weekly pay Shift: 4 days a week, 10 hours per day. Days: Monday - Thursday (standard schedule). Overtime may be required on Fridays/Saturdays according to business needs. The estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 PI73310c8b6b78-30***********7

i3 has an exciting opportunity for a Machinist to support the Naval Research Laboratory, Tactical Electronic Warfare Division. The TEWD's purpose is to protect the warfighter from emerging threats by advancing electronic warfare (EW) through simulation, testing and evaluation. Candidate will be responsible for mechanical fabrication and assembly of a variety of electromechanical hardware for use within an RF test facility. Pay Range $31.73 - 51.44 per hour The pay range for this position is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, geographic location, and any applicable laws. Responsibilities * Mechanical assembly of electromechanical systems such as gimbals. * Fabrication (using both additive and subtractive manufacturing means) of components for use in mechanical prototypes. * Setup/troubleshooting of manufacturing systems used for component fabrication. * Perform quality inspections of components and mechanical subsystems. Qualifications Required: * At least five (5) years of experience. * Demonstrated proficiency in modern manufacturing techniques such as CNC milling and turning operations (Haas and Tormach), and additive and subtractive manufacturing. * Ability to read and interpret CAD technical drawings. * Experience using precision measuring tools (e.g., calipers, micrometers), computer numerical control (CNC) equipment, and computer-aided design (CAD) software (e.g., SolidWorks). * Daily operation and maintenance of equipment in a machine shop. * Must be able to lift 50 pounds. * U.S. Citizenship is required. Desired: * Experience assessing the feasibility of in-house manufacturing vs. outsourcing and interfacing with outside manufacturing vendors (face-to-face meetings, CAD models). * Ability to set priorities, manage multiple tasks and meet deadlines. * Ability to work independently with minimal supervision. * Ability to document work performed and report results in technical reports and sponsor presentations. * Experience overseeing shop users, including safety training and proficiency assessment. Security Clearance: * Active Secret clearance with ability to obtain Top Secret. PHYSICAL DEMANDS: * The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; handle or feel; and reach with hands and arms. * The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must be able to lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. * Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. * Regular i3 hours are 8:00 a.m. - 5:00 p.m. Monday-Friday, however, additional hours may be required on occasion. Regular and punctual attendance is required. About i3 i3 is a technically diverse, 100% team member owned business, headquartered in Huntsville, Alabama specializing in missile and aviation systems engineering and logistic services, electronic warfare and electromagnetic effects analysis, UAS system integration and flight operations, full lifecycle C5ISR engineering services, cybersecurity and IT/IA innovative solutions and virtual training, simulation & serious game development and implementation. We have established a broad offering of products and capabilities collectively providing decades of experience supporting the full complement of DoD military services, Missile Defense Agency, National Aeronautics and Space Administration, and a variety of other Government organizations and private industry customers. Perks of being a team member owner include: * Long-term financial security * Higher job satisfaction * Greater job security * Personal and professional growth * Great company culture Other outstanding benefits: * Excellent insurance coverage * 401(k) match * Generous PTO * Health and wellness incentives * Tuition and certification reimbursement * Countless opportunities to give back to the community through i3 Cares We work hard. We compete hard. We play hard. Apply now to join us!

Are you looking to catapult your career by driving high-impact transformation with household brands? Do you crave an entrepreneurial, fast paced and engaging growth assignment working with incredible people from across the globe? At Dreyer's Grand Ice Cream, we are excited to start a new chapter of accelerated growth as part of Froneri - a global pure-play ice cream leader. Come help us transform DGIC into the #1 ice cream brand! With nearly 100 years of winning experience in the U.S, a robust portfolio of powerhouse brands that consumers know and love such as Häagen-Dazs, Drumstick, Dreyer's & Edy's, and the backing and coaching of European-based ice cream experts, we know we have the winning recipe. Headquartered in Walnut Creek, the Bay Area's hub for up and coming food trends, our teams across our offices and factories are raising the bar on all things ice cream. We are investing in significant capital expansion's to grow our Operations and Supply chain and are transforming how we work at every level to become agile, accelerate growth and elevate our quality. With a renewed focus on frozen treats, our tight-knit team of ambitious innovators are fully immersed in the business and encouraged to flex and make decisions quickly. We are committed to pursuing every great idea and delivering the best ice cream experience for our consumers, when and where they want it. Unleash your potential at Dreyer's Grand Ice Cream and discover what a sweet career we have in store for you! Job Purpose Statement: Reporting to the Automation and Controls Engineer, the welder / fabricator will be responsible for designing, fabricating, assembling / installing and repairing sheet metal, plastic and stainless steel parts. This position will utilize knowledge of working characteristics of metallic and non-metallic materials, machining, and layout techniques. Primary Responsibilities: Reading and interpreting blueprints and product specifications Performing Flat Pattern Layouts Using Hand Tools and measuring devices to perform basic tasks Using power tools, lathes, mills and welding equipment to perform complex tasks Working within teams or independently as directed Problem Solving process issues including redesign of equipment Repairing process equipment including pumps, gear reducers, seals, bearings, hydraulic/pneumatic systems, blowers, and conveyors. Supporting established Preventative Maintenance activities and identify new PM activities, as needed. Supporting continuous process improvement implementation and origination. Promote the Froneri culture of employees being owners rather than just employees. Position Requirements: Ability to read and interpret blueprints and product specifications Working knowledge of hand tools, power tools, lathe, mill and welding / fabrication equipment Must be able to read and follow blueprints, drawings and schematics 3 - 5 years' experience specializing in fabrication and / or welding (MIG, TIG and Stick welding processes, cutting torch, plasma cutting, etc.) Welding certification preferred but not required Excellent communication skills both verbal and written Good organizational and interpersonal skills Good math and analytical skills High School Diploma or GED Equivalent Must speak, read and write English BEHAVIORS AND CORE VALUES: Must consistently showcase the desired behaviors that represent our Core Values. We Take Ownership Stay committed to responsibilities from start to finish Make sound decisions and get into the right level of detail Apply resources to initiatives that add growth, improve efficiencies, or reduce waste We Do What Is Right Choose transparency over convenience, even if it means difficult conversations Set clear roles and responsibilities, enabling everyone to exercise appropriate initiative and judgment Speak up when you see something that does not align to our values and policies We Seek to Improve Strive to continuously improve and innovate to exceed expectations Value feedback from others and encourage open dialogue to understand how we can improve Learn from both successes and failures We Are Better Together Ensure decisions are based on what's best for the whole business Practice inclusion by seeking diverse perspectives Treat everyone with fairness and respect Work Environment: In this position, the employee will regularly work with and around others; in a wet and/or humid environment; in areas of high noise level; and around mechanical, electrical, and pressurized equipment. The work is fast paced. Cold Temperatures: Parts of the facility, such as storage and production areas, may be kept at low temperatures. Requires use of cold-protective PPE. May involve standing, lifting, and walking in refrigerated zones for extended periods. Fast-Paced: Workers often operate under strict timelines to meet production quotas. High-speed manufacturing floor with frequent movement, line assignment changes, and tight production timelines. Standing for Long Hours: Many roles require prolonged standing and repetitive tasks. Repetitive hand and arm movements required. Must be able to stand for hours with frequent bending, reaching, and lifting. Food Safety Regulations: Employees must follow hygiene and safety guidelines, including wearing protective gear (gloves, hairnets, etc.). Team-Oriented: Workers collaborate to ensure smooth production and packaging. The position involves frequent exposure to nuts and other potential allergens. The pay scale for this role takes into account the wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. At Dreyer's Grand Ice Cream, it is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. The pay range for prospective employees in this role is $42.20 per hour, with opportunities for overtime, shift differential, cold premium pay and annual bonuses (variable depending on company performance). We offer a comprehensive group benefits package including medical, dental, vision, life, paid time off, paid holidays, paid parental leave, 401K plan with employer match and annual contribution available. Dreyer's Grand Ice Cream Inc. provides equal employment opportunities for all applicants, regardless of race, religion, gender, national origin, age, disability, marital status, veteran status, or any other protected characteristic.

This position is responsible for the operation and maintenance of MSD machining equipment including basic levels of machine programming and troubleshooting to fabricate precision parts for developmental and manufacturing efforts. Additionally this role provides mechanical support to produce or repair product and/or equipment across multifunctional teams and departments. DUTIES AND RESPONSIBILITIES Produce parts to specifications using equipment such as power saw, water jet, mill, lathe, drill, media blasting and grinder. Work with Machinist III & IV to develop and optimize complex or production operations. Generate basic programs for Computer Numerical Control (CNC) equipment such as cutting stock on water jet or generating soft jaws for CNC mills. Set up, adjust, and operate various types of conventional/automatic machines, including CNC equipment to fabricate parts and assemblies. Layout, measure, and prepare stock for part manufacture. Operate standard hand and power tools to assemble parts into subassemblies and products. Perform maintenance on machines, equipment, and tools to ensure proper working order. Operate standard inspection equipment to confirm that parts conform to supplied drawings or requirements. Repair or fabricate assemblies and fixtures used in the machine shop, engineering, and manufacturing. Understand and follow safety precautions and ensure compliance with company safety policies. Provide training to others on safety precautions and company policies. Specific duties may vary depending upon department requirements. EXPERIENCE AND QUALIFICATIONS High school diploma required Minimum of three years machine shop experience required Accredited trade school diploma may be substituted for two years industrial experience Experience using basic hand tools and inspection equipment required KNOWLEDGE, SKILLS AND ABILITIES Ability to operate the following machine shop equipment: CNC Mills Lathe Water jet Drill Press Band saw Table saw Media blasting Pedestal grinder Thorough knowledge of machinery that performs threading, deburring, lapping, polishing, etc. Ability to interpret engineering drawings and requirements. Thorough knowledge of the operation of measurement equipment such as calipers, micrometers, indicators, CNC vision system, and CMM. Familiar with ISO Standards and Good Manufacturing Practices. Excellent communication skills with the ability to organize, present, and articulate ideas both verbally and in writing. Knowledge of MS Office. PHYSICAL DEMANDS While performing the duties of this job, the individual is frequently required to sit and stand for long periods. The individual will occasionally be required to walk; use hands and arms to operate, handle, or feel objects, tools or controls; reach with hands and arms. This position requires moving/lifting items up to 50lbs. WORK ENVIRONMENT This position is performed in a traditional production environment and/or light-manufacturing facility. COMPENSATION SUMMARY The annual base salary for this position ranges from $45,500 to $65,975. This salary range represents a general guideline as MSD considers other factors when presenting an offer of employment, such as scope and responsibilities of the position, external market factors, and the candidate's knowledge, skills, abilities, education and experience. Employees may qualify for a discretionary or non-discretionary bonus in addition to their base salary. These annual bonuses are intended to recognize individual performance and enable employees to benefit from the Company's overall success. BENEFITS SUMMARY At MSD, we offer a comprehensive benefits package to support our employees' well-being and financial security. In addition to competitive salaries, our benefits include medical, dental, and vision coverage, along with prescription benefits. We provide a 401(k) plan with company matching, flexible spending accounts, and company-paid short- and long-term disability insurance as well as group life and accidental death and dismemberment insurance. Our offerings also encompass paid vacation, paid sick leave, paid holidays, and paid parental leave, along with an employee assistance program. Additional voluntary perks include a fitness club membership contribution, pet insurance, identity theft protection, home and auto insurance discounts, and optional supplemental life insurance. EEO STATEMENT MSD is an Equal Opportunity Employer. We are committed to fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. We welcome applications from all qualified candidates, making employment decisions without regard to race, color, religion, creed, sex, genetic information, marital status, national origin, age, protected veteran status, pregnancy, disability status, or any other protected characteristic. For our full EEO statement, please visit here. Meso Scale Diagnostics uses E-Verify to validate the work eligibility of candidates.

Benefits: 401(k) 401(k) matching Competitive salary Dental insurance Health insurance Paid time off About the founded in 1986, located in beautiful Victor, New York, is a dynamic and growing medical device company with over 500 employees dedicated to advancing minimally invasive surgical instruments through research, development, manufacturing, and marketing. We have doubled in size in just the last 4 years! The LSI Campus includes 10 buildings (170,000+ sq ft) on 95 meticulously cared for acres. We are searching for passionate people looking to make a difference in the medical device industry. By joining an ISO 13485 certified company, you will become part of as energetic team working together to relentlessly pursue better patient outcomes with state-of-the-art devices. After all, our customer is ultimately the patient. POSITION TITLE:CNC Swiss/Mill Turn Machinist I, II, III - Evening Shift/Overnight Shift HOURLY PAY RANGE: $22.00/hr - $38.00/hr. Plus $2.00/hr shift differential. SHIFT HOURS: 2:00 pm- 10:30 pm LOCATION: Onsite at LSI Solutions in Victor, NY SIGNING BONUS: $3,000 (minus applicable taxes) after a successful 90 day review RELOCATION BONUS: depending on distance (minus applicable taxes) for relocations to the Rochester, NY region JOB SUMMARY: The CNC Swiss/Mill Turn Machinist programs, sets up, and operates Swiss style and Mill Turn CNC machines along with a variety of other machine tools. Working from part prints, process sheets, quality documentation, and CAD models to produce precision components to print. The Swiss Machinist promotes a work environment that is positive, safe, seeks to continuously improve, and is focused on meeting the goals and objectives of the organization. Cnc Swiss/Mill Turn Machinist Essential Functions Level I • Basic shop math skills. • Ability to read blueprints, work instructions, and inspection criteria. • Must be proficient in the use of standard inspection equipment. • Basic understanding of GD&T. Level II • Review complex drawings and GT&D. • Program and troubleshoot complex tool paths. • Troubleshoot complicated process issues independently. • Support training of Level I Machinist and Operators. • Work independently and in a team environment. • Work with other departments on projects, designs, and process improvements. Level III • Program, set-up, run parts, inspect, and make adjustments to produce conforming parts with no supervision. • Support Discovery and Engineering on rapid prototyping and urgent request. • Write and implement Macros. • Support and train new employees on work order line clearances to reduce any delays to downstream processes. • Mentor new employees and evaluate training requirements to meet KPI targets. • Monitor Hourly Productivity & Quality report and take action to resolve issues to meet daily targets. • Participate in daily KPI meeting focused on identifying and resolving issues impacting ability to meet daily and weekly targets. Cnc Swiss/Mill Turn Machinist Additional Responsibilities • All other duties as assigned. Education CNC SWISS/MILL TURN MACHINIST EDUCATION & EXPERIENCE: Level I • High School Diploma or equivalent required. • Completion of trade school preferred. • 1-2 years' experience setting-up and operate Swiss style and Mill turn machines required. Level II • High School Diploma or equivalent required. • Completion of trade school preferred. • 3-5 years' experience programming, setting-up and operate Swiss style and Mill turn machines required. Level III • High School Diploma or equivalent required. • Completion of trade school preferred. • 6+ years' experience programming, setting-up and operate Swiss style and Mill turn machines required. • Advanced programming experience required; Partmaker/Esprit experience preferred. Skills CNC SWISS/MILL TURN MACHINIST KNOWLEDGE, SKILLS & ABILITIES: Level I • Basic shop math skills. • Ability to read blueprints, work instructions, and inspection criteria. • Must be proficient in the use of standard inspection equipment. • Basic understanding of GD&T Level II • Knowledge of SPC preferred. • Good working knowledge of GD&T. • Programming experience preferred. • Able to run variety of shop equipment. • Experience working with close tolerances in a variety of metals. Level III • Capable of writing complex multi axis programs. • Strong working knowledge of GD&T. Cnc Swiss/Mill Turn Machinist Physical Demands And Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Frequently required to lift and/or carry from 10-30 lbs. • Some heavy lifting of up to 50 lbs. • Sitting, standing, and/or walking for up to eight hours per day in a manufacturing environment. • Regularly required to talk and/or hear, see, handle, reach, see color, and perform repetitive motion. • Occasional travel required. Lsi Solutions Benefits Include • Bonus Plan, 401(k) plan with company match, Tuition Assistance, Employee Assistance Program (EAP) and Product Discounts • 15 Paid Holidays, PTO, Sick Time • Medical, Vision and Dental effective first day of employment LSI SOLUTIONS is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Benefits found in job post • 401(k) • Tuition assistance Compensation: $22.00 - $38.00 per hour About Us AHU Technologies INC. is an IT consulting and permanent staffing firm that meets and exceeds the evolving IT service needs of leading corporations within the United States. We have been providing IT solutions to customers from different industry sectors, helping them control costs and release internal resources to focus on strategic issues. AHU Technologies INC. was co-founded by visionary young techno-commercial entrepreneurs who remain as our principal consultants. Maintaining working relationships with a cadre of other highly skilled independent consultants, we have a growing number of resources available for development projects. We are currently working on Various projects such as media entertainment, ERP Solutions, data warehousing, Web Applications, Telecommunications and medical to our clients all over the world.

We are seeking a skilled Machinist II with MasterCam experience to join our dynamic team. This role involves producing parts to specifications using advanced machine shop equipment and developing programs, setup sheets, and fixturing to ensure precise operations. **Responsibilities** + Produce parts to specifications using machine shop equipment. + Develop programs, setup sheets, and fixturing for efficient machine operation. + Set up, adjust, and operate conventional and CNC machines to fabricate parts and assemblies. + Align and secure fixtures, cutting tools, and materials onto machines. + Establish and monitor speed and feed rates during machining. + Layout, measure, and prepare stock for part manufacture. + Interpret engineering drawings to ensure proper product fabrication. + Fabricate, repair, and assemble plastic/metal parts using mechanical equipment. + Operate hand and power tools to assemble parts into subassemblies and products. + Clean and lubricate machines and equipment to maintain proper operation. + Operate inspection equipment to ensure parts conform to specifications. + Perform incoming inspection on parts and ensure produced parts meet specifications. + Provide feedback on parts and machining process improvements, including designing fixtures and jigs. + Draft and edit shop operational and preventative maintenance procedures. + Train personnel in the operation of shop equipment and tools. + Maintain inventory and order shop supplies and materials. + Coordinate work orders and shop use. + Perform preventative maintenance and simple repairs on shop machines and tools. + Understand and follow safety precautions, ensuring compliance with company safety policies. + Provide safety and policy training to others. **Essential Skills** + High school diploma required. + Minimum of five years machining experience required. + Accredited trade school diploma may substitute for two years of experience. + Experience using basic hand tools and inspection equipment required. + Proficient in operating CNC machines, band saws, table saws, media blasting, and pedestal grinders. + 2+ years of experience in CNC, mills, presses, or similar environments. + 2+ years of experience in an electro-mechanical manufacturing environment required. + Experience with electro-mechanical devices, lab equipment, or medical devices required. **Additional Skills & Qualifications** + Experience working in a regulated ISO/FDA (GMP) environment preferred. **Why Work Here?** Join a team in a well-equipped facility with supportive management and ample opportunities for growth. Employees speak highly of the work environment and potential for advancement. **Work Environment** Work in a production environment with bench work, testing units, and performing instrumentation duties. **Job Type & Location** This is a Contract to Hire position based out of Rockville, MD. **Pay and Benefits** The pay range for this position is $26.95 - $28.87/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Rockville,MD. **Application Deadline** This position is anticipated to close on Dec 26, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

This position is responsible for the operation and maintenance of MSD machining equipment including basic levels of machine programming and troubleshooting to fabricate precision parts for developmental and manufacturing efforts. Additionally this role provides mechanical support to produce or repair product and/or equipment across multifunctional teams and departments. DUTIES AND RESPONSIBILITIES * Produce parts to specifications using equipment such as power saw, water jet, mill, lathe, drill, media blasting and grinder. * Work with Machinist III & IV to develop and optimize complex or production operations. * Generate basic programs for Computer Numerical Control (CNC) equipment such as cutting stock on water jet or generating soft jaws for CNC mills. * Set up, adjust, and operate various types of conventional/automatic machines, including CNC equipment to fabricate parts and assemblies. Layout, measure, and prepare stock for part manufacture. * Operate standard hand and power tools to assemble parts into subassemblies and products. * Perform maintenance on machines, equipment, and tools to ensure proper working order. * Operate standard inspection equipment to confirm that parts conform to supplied drawings or requirements. * Repair or fabricate assemblies and fixtures used in the machine shop, engineering, and manufacturing. * Understand and follow safety precautions and ensure compliance with company safety policies. Provide training to others on safety precautions and company policies. * Specific duties may vary depending upon department requirements. EXPERIENCE AND QUALIFICATIONS * High school diploma required * Minimum of three years machine shop experience required * Accredited trade school diploma may be substituted for two years industrial experience * Experience using basic hand tools and inspection equipment required KNOWLEDGE, SKILLS AND ABILITIES * Ability to operate the following machine shop equipment: * CNC Mills * Lathe * Water jet * Drill Press * Band saw * Table saw * Media blasting * Pedestal grinder * Thorough knowledge of machinery that performs threading, deburring, lapping, polishing, etc. * Ability to interpret engineering drawings and requirements. * Thorough knowledge of the operation of measurement equipment such as calipers, micrometers, indicators, CNC vision system, and CMM. * Familiar with ISO Standards and Good Manufacturing Practices. * Excellent communication skills with the ability to organize, present, and articulate ideas both verbally and in writing. * Knowledge of MS Office. PHYSICAL DEMANDS While performing the duties of this job, the individual is frequently required to sit and stand for long periods. The individual will occasionally be required to walk; use hands and arms to operate, handle, or feel objects, tools or controls; reach with hands and arms. This position requires moving/lifting items up to 50lbs. WORK ENVIRONMENT This position is performed in a traditional production environment and/or light-manufacturing facility. COMPENSATION SUMMARY The annual base salary for this position ranges from $45,500 to $65,975. This salary range represents a general guideline as MSD considers other factors when presenting an offer of employment, such as scope and responsibilities of the position, external market factors, and the candidate's knowledge, skills, abilities, education and experience. Employees may qualify for a discretionary or non-discretionary bonus in addition to their base salary. These annual bonuses are intended to recognize individual performance and enable employees to benefit from the Company's overall success. BENEFITS SUMMARY At MSD, we offer a comprehensive benefits package to support our employees' well-being and financial security. In addition to competitive salaries, our benefits include medical, dental, and vision coverage, along with prescription benefits. We provide a 401(k) plan with company matching, flexible spending accounts, and company-paid short- and long-term disability insurance as well as group life and accidental death and dismemberment insurance. Our offerings also encompass paid vacation, paid sick leave, paid holidays, and paid parental leave, along with an employee assistance program. Additional voluntary perks include a fitness club membership contribution, pet insurance, identity theft protection, home and auto insurance discounts, and optional supplemental life insurance. EEO STATEMENT MSD is an Equal Opportunity Employer. We are committed to fostering a diverse and inclusive workplace where all individuals are treated with respect and dignity. We welcome applications from all qualified candidates, making employment decisions without regard to race, color, religion, creed, sex, genetic information, marital status, national origin, age, protected veteran status, pregnancy, disability status, or any other protected characteristic. For our full EEO statement, please visit here. Meso Scale Diagnostics uses E-Verify to validate the work eligibility of candidates.

In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible. Job Description: Parsons is looking for a Machinist to support a government contract in the National Capital Region (NCR). The ideal candidate will be able to provide technical support to the customer's fabrication and manufacturing shops. The candidate must have demonstrated experience designing, programming, and manufacturing metal, plastic, and composite components. What You'll Be Doing: * Design and machine custom pieces and parts. * Identify and implement strategic improvements and solutions that are in line with the customer's vision and mission * Create and manage schedules for prioritized, approved work requirements * Ensure industry and customer standards and best practices are followed for all requirements * Provide detailed guidance on proper use, general machine maintenance, and minor repairs to shop equipment * Oversee the management of consumables and procurement support * Provide inputs on shop safety best practices and maintenance of the shop safety plan, to include application of OSHA standards What Required Skills You'll Bring: * BS degree and 10+ years of prior relevant experience; additional experience will be considered in lieu of degree. * 10 years of demonstrated experience in the metal working discipline(s) * 5 years of demonstrated experience in mechanical skills instruction * Possess Machine Certification from an apprentice program * Demonstrated CAD/CAM experience * Demonstrated ability to aid others in design and troubleshooting of mechanical component designs * Demonstrated ability to manage multiple taskings and adapt quickly to changing requirements * Demonstrated experience working independently, as well as part of a team, including strong customer service and interpersonal skills * Demonstrated experience and literacy with Microsoft Office suite * Must have a current/active TS/SCI with poly clearance What Desired Skills You'll Bring: * Demonstrated proficiency with FeatureCam * Demonstrated knowledge of metal finishing processes to include anodizing, painting, and powder coating. Security Clearance Requirement: An active Top Secret SCI w/Polygraph security clearance is required for this position. This position is part of our Federal Solutions team. The Federal Solutions segment delivers resources to our US government customers that ensure the success of missions around the globe. Our intelligent employees drive the state of the art as they provide services and solutions in the areas of defense, security, intelligence, infrastructure, and environmental. We promote a culture of excellence and close-knit teams that take pride in delivering, protecting, and sustaining our nation's most critical assets, from Earth to cyberspace. Throughout the company, our people are anticipating what's next to deliver the solutions our customers need now. Salary Range: $100,900.00 - $176,600.00 We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle! Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status. We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY! Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to ************************************************

USAM DC is searching for a skilled Machinist to join our team. Positions are needed for operation of Machine Centers such as CNC (router), edge bander, wide belt sander, dowel insertion machine, beam saw, table saw, case clamp and other woodworking power equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES: Operates a variety of millwork machinery including a CNC, edge bander, table saws, and more. Ability to compute basic mathematics principles including: addition, subtraction, ability to read a tape measure, and calculate fractions. Comprehends, reads, writes and speaks English; reads shop drawings/work orders and architectural drawings. Ability to multi-task, tolerate and manage changes in priorities and deadlines. Adheres to safety practices to ensure proper use of all tools and machinery. Ability to stand, move with ease, and lift 75lbs, repeatedly for duration of shift. Inspects equipment prior to use to ensure proper setup and alignment; performs basic and routine adjustments and maintenance. Maintains a clean, safe, and orderly work area. Performs other related duties as assigned. Works extended hours when workload/schedules require. QUALIFICATION REQUIREMENTS High school diploma or equivalent Associates degree or completion of technical degree highly preferred 1 plus years of millwork manufacturing experience Ability to follow directions and work well in a team Ability to interpret and translate engineering designs and documentation Excellent coordination and mechanical skills Thorough understanding of or the ability to quickly learn production equipment Strong analytical and problem-solving skills Basic math skills to include fractions Understanding of and the ability to abide by applicable OSHA and environment standards Excellent written and verbal communication skills PHYSICAL DEMANDS: Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to sit; stand; walk; use hands, handle/feel objects, tools, or controls. The employee is occasionally required to reach with hands and arms; climb or balance; stoop, kneel, or crouch. The employee must occasionally push, pull, or lift from below the waist, or lift from an overhead position and carry 75+ pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: Work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee works on or near the shop floor where there may be moving mechanical parts with occasional exposure to the risk of electrical shock, outdoor weather conditions, fumes or airborne particles, and toxic or caustic chemicals. Noise level in the work environment is usually moderate and occasionally high.

Who We're Looking For Quantum Space is redefining how spacecraft move and operate across LEO, GEO, and cislunar environments. We are looking for an experienced Assistant Machinist with 5+ years of CNC set-up and run experience to join our team. This role is best suited for someone who values precision, efficiency, and craftsmanship, and who thrives in a collaborative, growth-focused environment. Rather than programming, the focus will be on executing and running programs developed by our team, ensuring high-quality results that support our mission. Where You'll Make an Impact - Set up and operate CNC machines to produce high-quality parts to specification. - Collaborate closely with programmers to run existing code efficiently. - Ensure quality standards are met through inspection and attention to detail. - Maintain equipment and support a clean, safe, and efficient work environment. - Bring a growth mindset and contribute to continuous improvement in machining processes. What It Takes 5+ years of CNC machine set-up and run experience. - Strong knowledge of machining processes and inspection techniques. - Ability to follow instructions and execute machining programs developed by others. - Attention to detail, reliability, and a proactive work ethic. - Desire and openness to grow skills, including the potential to learn programming. Additional Requirements - When not machining parts a willingness to assist in assembly and testing. What You'll Get - Opportunity to work in a supportive, growth-focused environment. - Competitive rate, equity, and comprehensive benefits, including medical, dental, vision, generous leave, FSA, 401(k) matching, and equity sharing. - Potential to expand into programming responsibilities depending on individual interest and outlook. - A team committed to excellence, collaboration, and professional development. To comply with U.S. Government space technology export regulations, including ITAR, applicants must be a U.S. citizen, lawful permanent resident, protected individual per 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Apply now. Join us in leading the future of space exploration.

Bowhead is hiring a Machinistto support the Army Research Laboratory (ARL) on Adelphi Laboratory Center (ALC) in Adelphi, Maryland. **Responsibilities** + JOB DESCRIPTION: + Perform assignments that are not completely standardized or prescribed. + Fabricate and/or modify many unique and precision items in support of the Army Research Laboratory programs. + Selects or adapts standard procedures or equipment, using fully applicable precedents. Receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed; performs recurring work independently; work is reviewed for technical adequacy or conformity with instructions. + Performs technician work of broad scope and complexity requiring the ability to interpret, select, adapt, and apply many guidelines, precedents and engineering principles and practices which relate to the area of specialization. Each assignment differs considerably from previous work and typically involves ingenuity and creative thinking to devise new ways of accomplishing objectives and in adapting existing equipment or techniques to solve the problems at hand. + Work requires practical knowledge of scientific and engineering principles, design characteristics, maintenance requirements, troubleshooting techniques, laboratory processes, and the peculiarities of various equipment and devices used. + Applies substantial judgment, initiative, skill and experience in selecting, installing and using complex instruments or devices; in modifying and adapting such instruments to obtain desired results; and in observing and noting significant trends in data. + Shall have the technical competence to work efficiently and hold very close tolerances (+/- .005 ") as a minimum for the lowest level requirement, and (+/- .0001") for higher level fabrications. + Meets with supervisor, team leader or customers to plan scope of the project, discuss objectives, plan methods for accomplishing objectives, identify potential problem areas and recommend alternatives to resolve conflicting requirements. + Identifies equipment and material needs, prepares cost estimates if required, and ensures data is within expected parameters. + Works independently, often without the availability of immediate supervisory guidance. + Keeps the supervisor advised of progress, but receives little review during progress of typical assignment. + Performs other duties as assigned. **Qualifications** + Demonstrate the ability to proficiently generate machine codes from the sketches/drawings to operate the Computer Numerically Controlled (CNC) mill and lathe to manufacture parts. + High school diploma or GED required. + Proficiency in Manual Machining prototype work. + Able to do minor welding, tig, and stick oxyacetylene. + Capable of shop related math skills. + Experience with CNC Mills and Lathes, with use of G-Code. + Work from verbal and written customer instructions to complete assignments. + Proficiency in the use of MasterCAM/ **SolidCAM** Software. + Experience with **MasterCAM/SolidCAM Software** and programming CNC machines. + Proficient in use of **HAAS milling and lathe machines,** with minimal to no assistance. + Gathers and maintains specified records of engineering data such as tests, drawings, etc. + **General knowledge and experience in welding are a plus, but not required.** This individual is authorized the use of Government tooling and equipment, both manual and CNC (i.e., hand tools, band saws, milling machines, lathes, machining centers, drill presses, brakes, punches, grinders, etc.) on-site at Government facility for required support. Physical Demands: + Must be able to lift up to 50 pounds repetitively. + Must be able to stand and walk for prolonged amounts of time. + Must be able to twist, bend and squat periodically. SECURITY CLEARANCE REQUIREMENTS: Must be able to obtain a security clearance at the Secret level. US Citizenship is a requirement for Secret clearance at this location. Applicants may be subject to a pre-employment drug & alcohol screening and/or random drug screen, and must follow UIC's Non-DOT Drug & Alcohol Testing Program requirements. If the position requires, an applicant must pass a pre-employment criminal background history check. All post-secondary education listed on the applicant's resume/application may be subject to verification. Where driving may be required or where a rental car must be obtained for business travel purposes, applicants must have a valid driver license for this position and will be subject to verification. In addition, the applicant must pass an in-house, online, driving course to be authorized to drive for company purposes. UIC is an equal opportunity employer. We evaluate qualified applicants without regard to race, age, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other protected characteristics EOE/D/V. In furtherance, pursuant to The Alaska Native Claims Settlement Act 43 U.S.C. Sec. 1601 et seq., and federal contractual requirements, UIC and its subsidiaries may legally grant certain preference in employment opportunities to UIC Shareholders and their Descendants, based on the provisions contained within The Alaska Native Claims Settlement Act. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. Please view Equal Employment Opportunity Posters provided by OFCCPhere (******************************************* . All candidates must apply online at ***************** , and submit a completed application for all positions they wish to be considered. Once the employment application has been completed and submitted, any changes to the application after submission may not be reviewed. Please contact a UIC HR Recruiter if you have made a significant change to your application. In accordance with the Americans with Disabilities Act of 1990 (ADA), persons unable to complete an online application should contact UIC Human Resources for assistance *****************/careers/recruitment/ . The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) UIC Government Services (UICGS / Bowhead) provides innovative business solutions to federal and commercial customers in the areas of engineering, maintenance services, information technology, program support, logistics/base support, and procurement. Collectively, the fast-growing Bowhead Family of Companies offers a breadth of services which are performed with a focus on quality results. Headquartered in Springfield, VA, we are a fast-growing, multi-million-dollar company recognized as a top Alaska Native Corporation providing services across the Department of Defense and many federal agencies. Bowhead offers competitive benefits including medical, dental, vision, life insurance, accidental death and dismemberment, short/long-term disability, and 401(k) retirement plans as well as a paid time off programs for eligible full-time employees. Eligible part-time employees are able to participate in the 401(k) retirement plans and state or contract required paid time off programs. **Join our Talent Community!** Join our Talent Community (************************************************************************ to receive updates on new opportunities and future events. **ID** _2025-24256_ **Category** _Engineering_ **Location : Location** _US-MD-Adelphi_ **SCA Hourly Rate** _USD $34.31/Hr._ **Clearance Level Must Be Able to Obtain** _Secret_ **Minimum Clearance Required** _Secret_ **Travel Requirement** _N/A_

The Ideal candidate will: Set up, operate, or tend lathe and milling machines to turn, bore, thread, form, or face metal or plastic materials. Responsibilities: * Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometer and calipers * Align and secure holding fixtures, cutting tools, attachment, accessories, and materials onto machines * Select the appropriate tools, machines, and materials to be used in preparation of machinery work * Monitor the feed and speed of machines during the machining process * Machine parts to specifications using machine tools such as lather, milling machines, shapers, or grinders * Set up, adjust, and operate all of the basic machine tools and many specialized or advanced variation tools to perform precision machining operations * Measure, examine, and test completed units to detect defects and ensure conformance to specifications, using precision instruments such as micrometers * Inspect samples work pieces to verify conformance with specifications, using instruments such as gauges, micrometer, and dial indicators * Study blueprints, layouts or charts, and job orders for information on specifications and tooling instructions, and to determine material requirements and operational sequences * Adjust machine controls and change tool settings in order to keep dimensions within specified tolerances * Move controls to set cutting speeds and depths and feed rates, and to position tools in relation to work pieces * Start lath or turning machines and observe operations to ensure that specifications are met * Select cutting tools and tooling instructions, according to written specifications or knowledge of metal properties and shop mathematics * Crank machines through cycles, stopping to adjust tool positions and machine controls to ensure specified timing, clearances, and tolerances * Replace worn tools, and sharpen full cutting tools and dies using bench grinders or cutter-grinding machines * Position, secure, and align cutting tools in tool holders on machines, using hand tools, and verify their positions with measuring instruments Requirements: * High school or equivalent; technical school preferred. * Minimum 7 years' experience with the set up and operation of CNC milling, 3D 4-axis machining. * Require the reading and interpretation of complex mechanical blueprints with GD&T. Experienced with wide variety of precision measuring equipment. Basic knowledge of using measuring instruments, machine tools and electronic meters. * Ability to work independently.

Senior Machinist- 5 Axis CNCJob Category: Service Contract ActTime Type: Full time Minimum Clearance Required to Start: SecretEmployee Type: RegularPercentage of Travel Required: NoneType of Travel: None* * * CACI is looking for a Computer Numerical Control (CNC) Machinist for technical support at the Naval Surface Warfare Center Carderock Division (NSWCCD) Model Shop fabricating prototype naval component scale models for R&D testing. This employee will also serve as the subject matter expert on CNC programming and fabrication, and will advise shop management, supervisors, and planners on the difficulty, complexity and risks that may arise in fabrication of potentially complex parts. More About the Role Machine model components using CNC and manual mills and lathes. Program, setup, and operate 3-, 4-, or 5-axis CNC machines. Hand-finish parts as required, using contouring and polishing. Collaborate with design engineers, make recommendations and share best practices with machining approaches and materials as a subject matter expert (SME) on machining Read and interpret engineering drawings (CAD/CAM) and tolerancing schemes, including GD&T. You'll Bring These Qualifications High School Diploma or GED 5-10 years of experience with setting up, programming, editing and operating CNC milling and lathe machines Experience with machining metals (aluminum, stainless steel) and other materials Experience with design process and mechanical assembly. Must be able to read and interpret drawings and blueprints Must be able to obtain and maintain an DoD Secret Clearance Effective verbal and written communication in English Basic MS Windows skills Ability to perform basic mathematical computations Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations PHYSICAL DEMANDS - Ability to move or transfer products with an overhead crane; Ability to lift 50 lbs. when required; While performing the duties of the job, the employee is regularly required to stand, walk, and reach with hands and arms; Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus These Qualifications Would Be Nice to Have Active DoD Secret Clearance This position is contingent on funding and may not be filled immediately. However, this position is representative of positions within CACI that are consistently available. Individuals who apply may also be considered for other positions at CACI. ________________________________________________________________________________________ What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you'll be part of a high-performing group dedicated to our customer's missions and driven by a higher purpose - to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You'll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground - in your career and in our legacy. Your potential is limitless. So is ours. Learn more about CACI here. ________________________________________________________________________________________ Pay Range: This posting is for a position covered by the Service Contract Labor Standards (SCA). The pay and benefits provided for this position will meet or exceed the minimum required amounts detailed in the wage determination issued by the Department of Labor and made applicable to this position, as incorporated into CACI's government contract for the work location. Minimum Required Hourly Wage: $31.20 There are a host of other factors that can influence final salary including, but not limited to, geographical location, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here. CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

Job DescriptionSalary: $29.50-42.00 Internal Code: CNC5 Reports to: Operations Manager MATSYS, Inc. is seeking a CNC Machinist to join its team of high-performing scientists, engineers, and technicians at its Sterling, VA facility. The CNC Machinist is responsible for setting up and operating CNC machines to produce high-quality precision components according to engineering drawings and specifications. This role requires hands-on machining expertise, strong attention to detail, and the ability to maintain tooling, equipment, and process documentation to meet tight tolerances, deadlines, and customer requirements, often in support of defense projects. If you are looking to join a rapidly growing company that offers a dynamic, fast-paced, solution-driven work environment, MATSYS is the place for you! This position is expected to be primarily assigned to our research and development facility (6 am-2:30 pm, Monday Friday), but the candidate should be flexible and willing to cross-train in our production environment (6 am-4:30 pm, Monday Thursday), as well. The successful candidate will be hired as a Machinist II or III based on experience and skillset. Description Set up and and operate CNC mills and lathes to produce precision parts Interpret engineering blueprints, technical drawings, and work orders to ensure parts meet tolerances and quality standards Perform machine offsets, tool changes, and adjustments as necessary Inspect parts using calipers, micrometers, and gauges Troubleshoot machining programs and processes Maintain machine tools, cutting equipment, and workstations in a clean and safe condition Complete documentation such as job travelers, inspection reports, and nonconformance records Collaborate with engineers and others to improve machining processes and implement lean manufacturing practices Follow all company compliance requirements Other duties as assigned Required Must be a U.S. citizen due to government contract requirements High School diploma or equivalent 3+ years of experience operating CNC machines in a precision (metal part) manufacturing environment (aerospace or defense experience desirable) Proficiency with precision measuring instruments (micrometers, calipers, height gauges, bore gauges, etc.) Ability to read and interpret GD&T (Geometric Dimensioning & Tolerancing) Basic program editing experience Ability to follow standard operating procedures (SOPs) and safety guidelines Working Conditions: Standing, walking, lifting/maneuvering up to 50 lbs. Frequent exposure to powders, dust, lubricants, and manufacturing equipment Use of PPE such as gloves, masks, safety shoes, and protective eyewear. Preferred 2-year degree, technical certification, apprenticeship or equivalent Experience with 5-axis mills Experience operating wire EDM machines Experience programming with CAD/CAM software (MasterCam preferred) Familiarity with ISO 9001 quality systems Competencies Work Execution & Excellence: efficient planning & quality execution, ability to meet deliverables & deadlines, drive towards excellence Communication & Team Impact: effective & quality communication ability, ability to effectively share technical information, as well as accountability and a team player commitment Technical Expertise & Development: continual learning and commitment to cross-training, strong hands-on mechanical skills Autonomy, Judgment & Decision-Making: Sound judgment and planning ability, risk assessment skills, creativity & critical problem-solving Commitment to MATSYS core values and ideals: Safety: Safety is at the forefront of our decision-making. We hold each other responsible to ensure the health and safety of our team at all times. Quality: We stake our reputation on our impeccable standards. We provide the utmost quality in everything that we do and deliver above expectations, both as individuals and as a team. Integrity: We are accountable, transparent, and act with respect and in the best interests of our customers, communities, and employees. Teamwork: Good ideas come from everyone and great ideas come from us working together. Impact: We are responsive and effect positive and ground-breaking change, delivering excellence every step of the way. About MATSYS Inc. As a frontrunner in next-generation materials and manufacturing processes, MATSYS excels in developing advanced materials and manufacturing processes, setting itself apart through innovation and problem-solving. With a culture built on collaboration, transparency, and excellence, we prioritize client satisfaction through open communication and integrity, fostering enduring partnerships. Our teams diverse skills in material development, powder processing, and design fabrication enable us to deliver comprehensive solutions to complex problems. Our future vision includes expanding production capabilities, establishing strategic integrations with industry leaders, and driving continuous innovation and growth. MATSYS prides itself on its dynamic team, its ability to push boundaries and the commitment of its employees to excellence, innovation and teamwork. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (male or female), national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by applicable law. Employment decisions are based solely on merit, qualifications, and business needsnever on protected characteristics. MATSYS uses E-Verify to verify right-to-work. MATSYS is a Drug-Free Workplace. Candidates are required to pass a pre-employment background investigation and drug test prior following receipt of a conditional job offer.

Perform assignments that are not completely standardized or prescribed. Fabricate and/or modify many unique and precision items in support of the Army Research Laboratory programs. Selects or adapts standard procedures or equipment, using fully applicable precedents. Receives initial instructions, equipment requirements, and advice from supervisor or engineer as needed; performs recurring work independently; work is reviewed for technical adequacy or conformity with instructions. Performs technician work of broad scope and complexity requiring the ability to interpret, select, adapt, and apply many guidelines, precedents and engineering principles and practices which relate to the area of specialization. Each assignment differs considerably from previous work and typically involves ingenuity and creative thinking to devise new ways of accomplishing objectives and in adapting existing equipment or techniques to solve the problems at hand. Work requires practical knowledge of scientific and engineering principles, design characteristics, maintenance requirements, troubleshooting techniques, laboratory processes, and the peculiarities of various equipment and devices used. Applies substantial judgment, initiative, skill and experience in selecting, installing and using complex instruments or devices; in modifying and adapting such instruments to obtain desired results; and in observing and noting significant trends in data. Shall have the technical competence to work efficiently and hold very close tolerances (+/- .005 ") as a minimum for the lowest level requirement, and (+/- .0001") for higher level fabrications. Meets with supervisor, team leader or customers to plan scope of the project, discuss objectives, plan methods for accomplishing objectives, identify potential problem areas and recommend alternatives to resolve conflicting requirements. Identifies equipment and material needs, prepares cost estimates if required, and ensures data is within expected parameters. Works independently, often without the availability of immediate supervisory guidance. Keeps the supervisor advised of progress, but receives little review during progress of typical assignment. Performs other duties as assigned. Qualifications Demonstrate the ability to proficiently generate machine codes from the sketches/drawings to operate the Computer Numerically Controlled (CNC) mill and lathe to manufacture parts. High school diploma or GED required. Proficiency in Manual Machining prototype work. Able to do minor welding, tig, and stick oxyacetylene. Capable of shop related math skills. Experience with CNC Mills and Lathes, with use of G-Code. Work from verbal and written customer instructions to complete assignments. Proficiency in the use of MasterCAM/SolidCAM Software. Experience with MasterCAM/SolidCAM Software and programming CNC machines. Proficient in use of HAAS milling and lathe machines, with minimal to no assistance. Gathers and maintains specified records of engineering data such as tests, drawings, etc. General knowledge and experience in welding are a plus, but not required. This individual is authorized the use of Government tooling and equipment, both manual and CNC (i.e., hand tools, band saws, milling machines, lathes, machining centers, drill presses, brakes, punches, grinders, etc.) on-site at Government facility for required support. Physical Demands: Must be able to lift up to 50 pounds repetitively. Must be able to stand and walk for prolonged amounts of time. Must be able to twist, bend and squat periodically. SECURITY CLEARANCE REQUIREMENTS: Must be able to obtain a security clearance at the Secret level. US Citizenship is a requirement for Secret clearance at this location.

SUMMARY: A CNC Machinist is responsible for operating one or more types of computer numeric controlled production equipment. Selects appropriate settings and makes adjustments as necessary. Commitment to and support of the Company Core Values are key to success in this position. ESSENTIAL DUTIES AND RESPONSIBILITIES: Verify that material and paperwork for the job being performed is correct Plan machining in accordance with all blueprints and hard copy and electronic technical data and specifications, applying geometric dimensioning and tolerances as required Set-up mills by adjusting all necessary fixturing and machine attachments; setting and applying tool and machine reference points and offsets and calculating requirements using basic math, geometry, and trigonometry Check stock and load and unload the machine Create an in-process inspection report for each operation, as necessary, if one does not exist Identify non-conformance, if discovered, notify your supervisor so that it can be documented identified, dispositioned, and segregated from the remainder of the lot Verify that there are no chips on either the jaws/fixture or on the part/material to be machined. Load the part/material, verify that the part is properly seated in the fixture/jaws, snug against any stop pins prior to clamping or tightening of the jaws Identify discrepant material left in your work area, notify your supervisor so that it can be dispositioned and segregated. Follow all quality procedures, work instructions, and documents pertaining to your job and department. Identify any problems/issues while running an operation, notify the supervisor immediately Responsible for keeping the machine and the immediate area clean Monitor coolant levels Clean the chips from machine at the end of shift, or when the job is finished Verify that all company and personal inspection equipment and tools being used are in calibration. Adhere to all company safety policies including the use of eye and ear protection. Perform all functions of the job while adhering to established quality policies and procedures Uphold the company core values Other duties as assigned SUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Successful accomplishment of duties and responsibilities may require the following: Must be able to operate the various machines within the department with minimal instruction. Must be capable of reading drawings and be able to inspect the parts they are machining. Must be capable of working with minimal supervision. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or 2 years experience; or equivalent combination of education and experience.0 LANGUAGE SKILLS: Ability to speak and understand basic safety and manufacturing instructions. MATHEMATICAL SKILLS: Ability to add and subtract two-digit numbers. Ability to multiply and divide with 10's and 100's. REASONING ABILITY Prioritize activities and work under pressures at all times. Comply with safety standard procedures Be able to differentiate between a symptom and a root of the problem Open to change and improvements Maintain clean and organized workspace CERTIFICATES, LICENSES, REGISTRATIONS: Authorization to work in the United States. To conform to U.S. export control regulations, you should be eligible for any required authorizations from the U.S. Government. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and hear. The employee frequently is required to use hands and fingers; handle, feel, and reach with hands and arms. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl; and smell. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly exposed to moving mechanical parts. The employee may be exposed to hot and/or cold work environment, chemicals, fumes or airborne particles, loud noises, risk of electrical shock and vibration low and high temperatures and/or other occupational hazards; personal protective equipment may be required. NOTE: This identifies the general nature and scope of work to be performed. Vitesse Systems, LLC. reserves the right to revise all or any part of this and to add or eliminate essential job functions at any time. Designation of any job duty as an essential function is not intended as an assurance or guarantee that a team member has any right to perform the job duty, except as required by Vitesse Systems, LLC. This job description is subject to change based on the needs of the position and/or the Company. Vitesse Systems, LLC performs work controlled by the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). These statutes require the protection of technical data and products. The regulations require that such data not be disclosed in written, oral, or visual form to any foreign national without prior export authorization from the Department of State. A foreign national is defined by the U.S. Government under EAR 734.2(b)(2)(ii) and 8 USC 110 (a)(20) as one who: Is not a United States citizen Is not lawfully admitted for permanent residence in the U.S. Does not have politically protected status (embassy, refugee, or asylum) Has dual U.S. / foreign citizenship Vitesse Systems, LLC. is an Equal Employment Opportunity / Affirmative Action (EEO/AA) Veterans / Disabled Employer

SUMMARY: A CNC Machinist is responsible for operating one or more types of computer numeric controlled production equipment. Selects appropriate settings and makes adjustments as necessary. Commitment to and support of the Company Core Values are key to success in this position. ESSENTIAL DUTIES AND RESPONSIBILITIES: Verify that material and paperwork for the job being performed is correct Plan machining in accordance with all blueprints and hard copy and electronic technical data and specifications, applying geometric dimensioning and tolerances as required Set-up mills by adjusting all necessary fixturing and machine attachments; setting and applying tool and machine reference points and offsets and calculating requirements using basic math, geometry, and trigonometry Check stock and load and unload the machine Create an in-process inspection report for each operation, as necessary, if one does not exist Identify non-conformance, if discovered, notify your supervisor so that it can be documented identified, dispositioned, and segregated from the remainder of the lot Verify that there are no chips on either the jaws/fixture or on the part/material to be machined. Load the part/material, verify that the part is properly seated in the fixture/jaws, snug against any stop pins prior to clamping or tightening of the jaws Identify discrepant material left in your work area, notify your supervisor so that it can be dispositioned and segregated. Follow all quality procedures, work instructions, and documents pertaining to your job and department. Identify any problems/issues while running an operation, notify the supervisor immediately Responsible for keeping the machine and the immediate area clean Monitor coolant levels Clean the chips from machine at the end of shift, or when the job is finished Verify that all company and personal inspection equipment and tools being used are in calibration.

About Us: BW Papersystems, part of the Barry-Wehmiller Group, builds capital equipment that transforms paper into products for consumers - every day, around the world. We offer innovative technologies, service and parts, and years of global experience in corrugating, finishing; slitting and packaging; stationery; bookbinding and security documents. Customers rely on our machines to produce and convert items such as corrugated boxes, folding cartons, passports, notebooks, copy paper, board, and coated and other specialty papers. For more information, visit bwpapersystems.com. Barry-Wehmiller is a diversified global supplier of engineering consulting and manufacturing technology for the packaging, corrugating, sheeting and paper-converting industries. By blending people-centric leadership with disciplined operational strategies and purpose-driven growth, Barry-Wehmiller has become a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world. Job Description: BW Papersystems is seeking a CNC Machinist to join our team! BW Papersystems is searching for a CNC Machinist that can perform a range of rough and finish turning, drilling, tapping, boring, facing, recessing, thread cutting and similar machining operations on a variety of shafts, housings heads, and parts of various ferrous and non-ferrous metals and alloys. In this role you will machine parts to specifications using manual and CNC machine tools such as mills, lathes, saws, and grinders. Key Responsibilities: * Select the appropriate tools, machines, and materials to be used in preparation of machinery work. * Perform a range of rough and finish turning, drilling, tapping, boring, facing, recessing, thread cutting and similar machining operations on a variety of shafts, housings, heads, and parts of various ferrous and non-ferrous metals and alloys. * Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines. * Use GD&T principles to interpret and analyze blueprints, schematics, and technical drawings to ensure accurate implementation of standard processes. * Use mathematical knowledge to calculate location and positioning of features. * Edit programs, set up, adjust, and operate basic machine tools, and many specialized or advanced machine tools to perform precision machining operations. * Monitor the feed and speed of machines during the machining process and perform quality control checks of critical features. * Measure, examine, and test completed units to detect defects and ensure conformance to specifications using precision instruments like micrometers, dial bore gauges, and calipers. * Maintain clean and orderly work areas and equipment, report and correct and unsafe work practices or conditions immediately. * Perform all work in accordance with established safety procedures. * Multi-task various duties throughout the day; maintain a positive attitude with versatility and flexibility. * Communicate and interact with various teams and teammates to solve problems independently. Basic Qualifications & Requirements: * High School Diploma or GED equivalent * 2+ years of experience working in a machine shop environment. The approximate pay range for this position is $23/HR - $30/HR. Please note that the pay range provided is a good faith estimate for the position at the time of posting. Final compensation may vary based on factors including but not limited to background, knowledge, skills, and abilities as well as geographic location of the position. #LI-JK2 At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. Barry-Wehmiller is an equal opportunity employer. M/F/D/V This organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. Company: BW Papersystems

Machinist (Engineering Technician III) (EPFAB-2025-23429): Bowhead is seeking a qualified Machinist to join the Machine Shop team at the Naval Surface Warfare Center Dahlgren Division (NSWCDD) in Virginia. This position offers a unique opportunity to collaborate with the U.S. Navy in the development of prototypes and short-run production work, contributing to critical national defense projects. Our machinists are responsible for programming, setting up, and machining parts in accordance with Department of Defense (DoD) specifications and models. The role involves working with a diverse range of materials, including a variety of aluminum, stainless steel, plastic, Inconel, and titanium. We are particularly seeking candidates with substantial experience in CNC lathe programming and operation. While there will be a mix of mill and lathe work, our current project demands have shifted toward more lathe-focused machining. We provide comprehensive in-house and at-home training on SolidWorks and CAMWorks, offering opportunities for continuous skill development and career advancement. Government-provided tools will be available to support your work. This intermediate-level position requires a minimum of five years of experience in machining and the ability to work both independently and collaboratively within a team. There may be occasions where the machinist will be required to assist colleagues with programming or machining techniques. **Bowhead offers:** + Engineering Technician III position pays $30.98 per hour, plus $4.93 per hour for H&W (Health and Welfare) + A total of 28 paid days off per year. (Described below) + Paid vacation accrued up to 10 days a year. + Paid sick leave accrued up to 7 days a year. + Paid holidays 11 per year. + Up to $175 for safety boots every two years. + Up to $5250 for college tuition per year. + Up to $5250 for training per year. + Prescription safety glasses are provided yearly. **Responsibilities** Machinists are required to program and operate both CNC lathes/mills, set tools in the machines, and create fixtures to hold uniquely shaped parts/components. (Most of the equipment in the shop is either Haas, Fadal, or ProtoTraks and is used daily.) Comply with DoD drawings and hold tight tolerances on machined parts. Machinists will operate saws and occasionally use manual lathes and mills. They are expected to use standard measuring tools such as dial calipers and micrometers to inspect their parts. **Qualifications** + Must have a high school diploma. + Must have at least five (5) years of professional experience operating CNC milling machines and lathes. (Technical training may be considered as experience) + Must be able to draw and program using CAD/CAM software. + Basic level skills in Microsoft Office software suite - Word, Excel, and Outlook. + Have a proficient understanding of reading and interpreting Machinist drawings including Geometric Dimensioning and Tolerancing (GD&T). + Capable of using common precision measuring tools such as dial calipers and micrometers to inspect in-process and completed parts. + Ability to communicate effectively with all levels of employees, customers, and management and respond to instructions/assignments. Be willing to assist other employees with Machinist-related issues. I.e., programming and set-ups. + Must be able to read, write, and speak English. + Strong interpersonal skills and good judgment with the ability to work alone or as part of a team. + Must be able to lift up to 75 pounds. + Must be able to stand and walk for prolonged amounts of time. + Must be able to twist, bend, and squat periodically. Physical Demands: + Must be able to lift up to 75 pounds + Must be able to stand and walk for prolonged amounts of time + Must be able to twist, bend and squat periodically SECURITY CLEARANCE REQUIRED: Must be able to obtain and maintain a security clearance at the Secret level. US Citizenship is a requirement for Secret clearance at this location. Acquiring a clearance will be done with the assistance of Bowhead upon hiring unless the candidate already possesses a clearance. \#LI-BG1 Applicants may be subject to a pre-employment drug & alcohol screening and/or random drug screen, and must follow UIC's Non-DOT Drug & Alcohol Testing Program requirements. If the position requires, an applicant must pass a pre-employment criminal background history check. All post-secondary education listed on the applicant's resume/application may be subject to verification. Where driving may be required or where a rental car must be obtained for business travel purposes, applicants must have a valid driver license for this position and will be subject to verification. In addition, the applicant must pass an in-house, online, driving course to be authorized to drive for company purposes. UIC is an equal opportunity employer. We evaluate qualified applicants without regard to race, age, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other protected characteristics EOE/D/V. In furtherance, pursuant to The Alaska Native Claims Settlement Act 43 U.S.C. Sec. 1601 et seq., and federal contractual requirements, UIC and its subsidiaries may legally grant certain preference in employment opportunities to UIC Shareholders and their Descendants, based on the provisions contained within The Alaska Native Claims Settlement Act. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. Please view Equal Employment Opportunity Posters provided by OFCCPhere (******************************************* . All candidates must apply online at ***************** , and submit a completed application for all positions they wish to be considered. Once the employment application has been completed and submitted, any changes to the application after submission may not be reviewed. Please contact a UIC HR Recruiter if you have made a significant change to your application. In accordance with the Americans with Disabilities Act of 1990 (ADA), persons unable to complete an online application should contact UIC Human Resources for assistance *****************/careers/recruitment/ . The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) UIC Government Services (UICGS / Bowhead) provides innovative business solutions to federal and commercial customers in the areas of engineering, maintenance services, information technology, program support, logistics/base support, and procurement. Collectively, the fast-growing Bowhead Family of Companies offers a breadth of services which are performed with a focus on quality results. Headquartered in Springfield, VA, we are a fast-growing, multi-million-dollar company recognized as a top Alaska Native Corporation providing services across the Department of Defense and many federal agencies. Bowhead offers competitive benefits including medical, dental, vision, life insurance, accidental death and dismemberment, short/long-term disability, and 401(k) retirement plans as well as a paid time off programs for eligible full-time employees. Eligible part-time employees are able to participate in the 401(k) retirement plans and state or contract required paid time off programs. **Join our Talent Community!** Join our Talent Community (************************************************************************ to receive updates on new opportunities and future events. **ID** _2025-23429_ **Category** _Installation/Maintenance/Repair_ **Location : Location** _US-VA-Dahlgren_ **SCA Hourly Rate** _USD $30.98/Hr._ **Clearance Level Must Be Able to Obtain** _Secret_ **Minimum Clearance Required** _Secret_ **Travel Requirement** _N/A_