Machinist jobs in Syracuse, NY

Job Description Machinist 2nd Shift (Union Pay and Benefits) Hours: 3:30pm-12:00pm Monday - Friday OT as needed Education: High School Diploma / GED required Requirements: 3-5 years' experience working with machining equipment required, must be able to read blue prints and use standard metrology equipment including mics, calipers, gages etc. Benefits: Union benefits including medical, dental, paid vacation etc. Summary: Set up and operate a variety of machine tools to produce precision parts. Work to tolerances as specified in blue print, drawing, model or other design specification document or file. Methods to achieve final machined part may specify speed, feed, cuts, tooling, and procedure to follow. Perform similar or incidental work of comparable or lower level as required. Perform other miscellaneous duties as assigned. Position Responsibilities: Set up and operate manual and CNC milling machines, drills, lathes, grinders and various other shop equipment Assure all machined parts in-house and incoming are at the highest level of quality and accuracy. Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines. Monitor quality and workmanship. Verify accuracy on prints, verify any revisions on prints. Tool inventory/management Department organization and machine maintenance. Inform supervisor/ Engineer of any questions or problems regarding product/ department error. Participate in minimizing scrap levels. Suggest possible improvements to provide a higher quality product. Support process improvements, communicate thoughts of improvement. Look for any bottlenecks, suggest possible improvements. Be involved in all process Improvements. Other duties as assigned Position Requirements: 3-5 years' experience with CNC and manual milling machines, drills, lathes, grinders and various related items. Ability to read blue prints is required Ability to read measuring devices including mics, calipers, various gages etc. is required Must be able to perform basic troubleshooting Good communication / people skills. Must be highly motivated and able to work independently High school diploma or GED required Participate in producing in high levels of quality at precise tolerances. Mechanical aptitude required

Title: Machinist III Duration: 0-06+ Months Shift: 7am to 3: 30pm (1/2-hour lunch at noon) - Monday through Friday - OT must be pre-approved Pay Rate: $30.00/- Hourly OT40 Responsibilities: 3yr plus CNC programming background. Familiarity with SolidWorks CAD. Ability to read and interpret documents such as blueprints, safety rules, operating and maintenance instructions, and procedure manuals. Ability to apply basic concepts of algebra and geometry. Ability to calculate and set controls to regulate machining factors such as speed, feed, coolant flow, depth and angle of cut, or enter commands to retrieve, input, or edit computerized machine control media. Qualifications: High School Diploma or equivalent. 3+ years related experience or equivalent combination of education and experience. Requirement: 5+ year experience with manual lathe and mill (CNC/XYNZ) experience. Candidate must be able to do initial programming and hold some tolerances based on industry standard practices. Previous contractor could not do the setup part but could use machine after set up. Less programming required than operating. Set ups for close tolarencing. No grinding experience required but can be a positive. Familiarity with HAAS and Solidworks CAD/CAM is nice to have but not required

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** Scope: Responsible for the generation, maintenance and control of CNC programs for the fabrication of TTM parts, subassemblies and end products. Essential Duties & Responsibilities: * Keep Machine Shop Supervisor and Facilities informed of problems and breakdowns. * Work closely with CNC Operator and Programmer to help generate time saving CNC programs (CI). * Perform first-piece inspection of all set-ups to insure high yield and quality of work performed. * Review designs of new and existing products and ensure adequate and acceptable CNC programs can be generated in a cost effective manner and per established standards. * Assist designer in development of part designs to ensure manufacturability. Conceptualize, define, develop and debug CNC programs for engineering and production fabrication of TTM parts, subassemblies and end-products. * Determine feasibility of design concepts. * Work with process engineering personnel to determine proper feeds and speeds for available tools while considering the machine characteristics and the type of material to be machined. * Work to develop customer relationships through collaboration, respect, professionalism, trust and integrity. * Comply with established procedures regarding support documentation and quality assurance operations for all programs written or revised. * Comply with and enforce safety regulations. Job Knowledge, Skills and Abilities: * Ability to use precision measuring tools, (i.e. micrometer, caliper, height gauge) * Ability to interpret blueprints/drawings * Ability to access computer (i.e. 3D modeling software) * Must have good interpersonal, organizational, and analytical skills Education and Experience: Associate's degree - Machine Trades/Mechanical Technology or Equivalent 0-2 Years of Experience in Machine Operating and related Metal Machines training #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $37,381 - $59,086 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency (“RF”) components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards (“PCB”s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at *********** TTM strives to invest in our team members at all levels - starting on your first day. To support the growth and development of our new hires, this position is eligible for a 90 Day Evaluation that includes a pay increase if key performance indicators are met. Scope: Responsible for the generation, maintenance and control of CNC programs for the fabrication of TTM parts, subassemblies and end products. Essential Duties & Responsibilities: Keep Machine Shop Supervisor and Facilities informed of problems and breakdowns. Work closely with CNC Operator and Programmer to help generate time saving CNC programs (CI). Perform first-piece inspection of all set-ups to insure high yield and quality of work performed. Review designs of new and existing products and ensure adequate and acceptable CNC programs can be generated in a cost effective manner and per established standards. Assist designer in development of part designs to ensure manufacturability. Conceptualize, define, develop and debug CNC programs for engineering and production fabrication of TTM parts, subassemblies and end-products. Determine feasibility of design concepts. Work with process engineering personnel to determine proper feeds and speeds for available tools while considering the machine characteristics and the type of material to be machined. Work to develop customer relationships through collaboration, respect, professionalism, trust and integrity. Comply with established procedures regarding support documentation and quality assurance operations for all programs written or revised. Comply with and enforce safety regulations. Job Knowledge, Skills and Abilities: Ability to use precision measuring tools, (i.e. micrometer, caliper, height gauge) Ability to interpret blueprints/drawings Ability to access computer (i.e. 3D modeling software) Must have good interpersonal, organizational, and analytical skills Education and Experience: Associate's degree - Machine Trades/Mechanical Technology or Equivalent 0-2 Years of Experience in Machine Operating and related Metal Machines training #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $37,381 - $59,086 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Armstrong has an opening for the second shift CNC Machinist 2. Armstrong Rapid Manufacturing has been in business for over 50 years in the East Syracuse NY area. Armstrong specializes in both prototyped and low volume production machined castings. Armstrong has a benefit package that includes paid holidays, bonus and referral programs, paid vacation, 401K, 100% company paid life insurance, sick time, supplemental short term disability insurance, dental, medical, vision, accident, cancer and critical care insurance plus safety awards. We also provide free coffee daily for our employees available at multiple coffee kiosks. Our website is ******************* and it shows many of the exciting aspects of our company! Take a look! The Salary Range for our CNC Machinist 2 job is $ 24.00-$ 29.00 per hour (please note that working 2nd shift as defined has a 10% 2nd shift differential also) with the job description below: Summary/Objective: Produces machined parts by setting up and operating a computer numerical control (CNC) milling machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. Job Responsibilities Using blueprint or process sheet, set up jobs and operate one or more of a variety of multi axis CNC milling machines/tools. Obtains first piece approval from quality inspection. At specified frequencies, uses a variety of hand inspection tools to compare part dimensions with blueprint or process and record data. Diagnoses, analyzes and troubleshoots problems. Monitor tooling for wear and breakage and replace as necessary. Monitors tooling for wear and breakage and replaces it as necessary. Verify counts with job traveler documentation and complete the required reports and records. Plans machining by studying work orders, blueprints, materials, specifications, reference planes, locations of surfaces, and machining parameters etc.; interpreting geometric dimensions and tolerances (GD&T). Enters instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs. Sets-up mills by installing and adjusting tooling and attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices etc. Loads feed mechanism by lifting stock into position. Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to international standards. Maintains specifications by observing milling, taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes. Maintains safe operations by adhering to safety procedures and regulations. Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs. Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs. Documents actions by completing production and quality logs. Updates job knowledge by participating in educational opportunities; reading technical publications. Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Trains CNC Machinist employees as needed. Adheres to all safety policies and practices, consistently uses personal protective equipment, and practices good housekeeping. Maintains regular on-time attendance and adheres to company policies, procedures, and standards of conduct. Applies classroom and on the job post training information, knowledge, skills, and abilities consistently in a quality-oriented manner (wherein the KSAs are part of the jobs tasks, duties and other tasks as requested). Performs other tasks as directed including deburring parts and performing other operations during cycle. Educational, Experience Based, and Skill Qualifications Technical, BOCES, or high school graduate with two (2) years experience in set-up and operation of CNC vertical and horizontal machine centers or equivalent. Ability to read prints, diagram, and use micrometer, verniers, calipers, and gauges. Strong attention to detail. Physical Requirements Ability to walk, remain on feet for extended time periods, reach, stoop. Kneel and lift up to an including 35 pounds as needed. Armstrong is proud to be an equal opportunity workplace and an affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, genetics, disability, age, veteran status, or any other protected status. We are an Equal Opportunity Employer. Job Posted by ApplicantPro

Job Title: CNC Machinist Company: AVStar At AVStar, we are committed to delivering top-quality products to the general aviation sector. We pride ourselves on fostering a fast-paced and collaborative environment where your contributions make a direct impact on our mission. Join our dynamic team and play a key role in driving both customer satisfaction and company success. Position Summary: We are seeking skilled CNC Machinists to join our team in Auburn, NY. If you're passionate about the manufacturing process and want to grow in a supportive, hands-on environment, we want to hear from you! The role offers opportunities for advancement, with various levels of responsibilities based on experience. Key Responsibilities: Entry-Level (A): Operate 4-axis and below mills and turning centers. Monitor multiple machines efficiently. Use mics, calipers, and basic inspection techniques. Inspect and record critical features using hand tools and comparators. Read and interpret blueprints. Preset tooling per the tool sheet. Advanced-Level (B): All responsibilities from Entry-Level (A). Perform simple setups on 4-axis and below mills and turning centers. Conduct semi-complicated prove-outs of new programs. Operate 5-axis mills and mill-turn machines. Operate Swiss machinery. Use independent judgment for tooling and work coordinates. Operate CMM for verification and perform minor CNC program edits. Advanced-Level (A): All responsibilities from Advanced-Level (B) and Entry-Level (A). Efficient setups on all CNC equipment. Perform prove-outs on complicated setups and parts. Calculate and suggest complex changes to part programs. Serve as a trainer in mechanical inspection techniques and CNC equipment. Mentor and demonstrate leadership to team members. Qualifications: Strong knowledge of blueprint reading. Solid math skills. Ability to work with a variety of CNC machinery and tools. Key Competencies: Fundamental knowledge of CNC machining principles. Mechanical inclination and problem-solving skills. Team-oriented mindset with a focus on collaboration and continuous improvement. Compensation: Starting Pay: $20.00 - $37.00/hr (commensurate with experience) Shift differentials offered for second and third shifts. Work Schedule: Monday to Friday, 8-hour shifts. Benefits: At AVStar, we offer a generous benefits package, including: Health insurance with a substantial company contribution. Simple IRA retirement plan with employer match. Dental and vision insurance. Life insurance. Paid time off. 9 paid holidays. Equal Opportunity Employer: AVStar is an Equal Opportunity Employer (Disability/Veteran) and is a drug-free workplace.

About Advanced Atomization Technologies Advanced Atomization Technologies (AA TECH) is a joint venture between Parker Aerospace and GE Aviation, created to produce and support advanced fuel nozzles and related products for current and future commercial engine platforms, including aerospace and aero-derivative engines. The highly skilled and experienced team of AA TECH employees is expert in design, assembly, testing, and aftermarket support, providing our customers with a world-class product and support experience. AA TECH offers a comprehensive and competitive compensation and benefits package, including: Variable Incentive Plan (Bonus Eligibility) Health, Dental, and Vision Insurance with HSA Company Contribution 401k Plan with Employer Match Tuition Reimbursement 12 Paid Holidays Vacation Accrual Position Summary: This position is for a machinist to setup and operate CNC machines. The employee will operate one or more production machines working from blueprints, sketches, and route sheets. Contributes to lean initiatives to increase productivity and reduce costs. Key Responsibilities : Sets up and runs production machines. Performs machine operations (may include reworking parts) such as cutting, shaping, deburring, forming, drilling, and reaming parts, where the materials, tooling, and sequence of operations have been pre-planned and established. Performs operations such as tapping, spot-facing, chamfering, countersinking, and counterboring to close tolerances. Adjusts feeds, speeds, and depth of cut to machine quality parts, per documentation. Accurately and regularly performs all statistical process control (SPC) specific to division requirements. Required Qualifications: High school diploma or equivalent, and/ or completion of Machinist Certificate program preferred 1-3 years related machining experience Has working knowledge of machine shop mathematics, may include trigonometry. CNC and/ or manual machining experience and experience making tool / work offsets. Set-up experience, reading / editing of G/M-code, and experience with a FANUC control a plus. Ability to use measuring equipment (ex: comparator, micrometers, calipers, pin or wire gauges, etc.) Key Competencies: Demonstrates effective verbal and written skills along with the ability to work in a team environment. Observes all company policies and procedures, including safety rules, and maintains a clean and orderly work area. Must demonstrate manual dexterity and a willingness to learn. Effectively demonstrates team member competencies and participates in goal setting, performance feedback, and self-development activities. Due to the Company's military contractor status, the applicant must be a U.S. citizen or a permanent resident of the United States and must provide evidence of citizenship or immigration status upon applying for the position. Advanced Atomization Technologies, LLC is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, or any other consideration made unlawful by federal, state or local laws. ("Minority/Female/Disability/Veteran/VEVRAA Federal Contractor”). Typical Mental and Physical Demands: While performing the duties of this job, the team member is required to walk, stand, and sit for extended periods of time. The team member is required to demonstrate manual dexterity and use hands to operate machinery. Specific vision abilities required by this job include close vision. Also expected of the team member is regular attendance and the ability to work cooperatively and professionally with others. May be required to lift up to 50lbs. In addition to the key responsibilities listed above, this position requires successful completion of all other duties assigned by management.

CNC Machinist / Manual Machinist / Machining Technician required to join a leading aftermarket engineering company based in Canastota, NY. CNC Machinist / Manual Machinist / Machining Technician will be responsible for setting up and operating manual and CNC lathes, mills, and other shop equipment to support both production and engineering operations in a low-volume, high-mix environment. The role involves blueprint interpretation, machine maintenance, and contributing to quality and safety standards across the facility. CNC Machinist / Manual Machinist / Machining Technician will ideally have experience performing a range of fundamental machining operations, including turning, milling, drilling, and threading, on turbomachinery components and assemblies. Package $18 to $25 DOE PTO 401(k) CNC Machinist / Manual Machinist / Machining Technician Role Experience operating and monitoring CNC machines for precision and performance. Confident using propane/acetylene torches and basic lifting gear (pallet jacks, small lifts). Ability to read blueprints and G-Code with ease. Hands-on knowledge of machining processes: turning, milling, drilling, and threading. Comfortable working to tight tolerances and producing high-spec parts from detailed technical drawings. Proficient with precision measuring tools (micrometers, calipers, indicators) and their proper care and calibration. CNC Machinist / Manual Machinist / Machining Technician Requirements Proficient in operating CNC machinery with at least 3 years of experience. Skilled in working with manual machines and band saws. Capable of calculating dimensions and tolerances using mathematical principles and precision instruments such as micrometers and callipers. Competent with hand tools and demonstrates strong basic mechanical aptitude. Able to read and interpret technical drawings and blueprints.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required What You Will Do: Obtains necessary stock, fixtures, tooling and gauging Performs ECM functions Performs general machining as required in support of ECM process Sets up and operates manual machines necessary to produce pre and post ECM module parts. For example (not all inclusive): Lathes. Grinders Performs Rockwell testing Performs in-process inspection as a certified operator Performs computer transactions Moves parts to, from, within module Cleans machines including filter press General housekeeping Provides direction to Module Support Tech Qualification We Require: Minimum of a high school diploma or equivalent, preferably technical school background, and demonstration of basic educational competencies (reading, writing). Blueprint and routing reading and comprehension Competent with hand tools and experienced with measuring equipment Basic computer skills such as log on, data entry and retrieval Obtain certifications and qualifications required to perform job 8 hour RCRA hazardous waste handler training (initially and annually) Team Competencies: Action Oriented: Enjoys working hard and does what is necessary to get the job done; energetic and enthusiastic for the things he/she sees as challenging; not fearful of acting with a minimum amount of planning; seizes more opportunities than others. Identifies and recommends process improvements. Effectively copes with change, able to shift gears comfortably. Is dedicated to meeting the expectations and requirements of internal and external customers. Interpersonal Skills/Teamwork: Relates well to all kinds of people, effectively works as a team member to meet customer expectations and team goals. Builds constructive and effective relationships with co-workers. Successfully trains and assist others. Uses diplomacy and tact. Is a positive influence on the team; Contributes/supports our culture of respect. Quality of Work: Produces a quality product with little/no rework, scrap or customer returns. Strictly adheres to proper procedures (e.g. prints, work instructions). Supports and participates in work/process improvements. Functional/Technical Skills: Has the functional and technical knowledge and skills to do the job at a high level of accomplishment. Can learn new skills, products and processes quickly. Actively seeks opportunities to learn new skills. Interested in the products and processes of other teams and volunteers to work with them when the need arises. Collins Aerospace, a RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. We make modern flight possible for millions of travelers and our military every second. Our major product lines are on-board virtually every aircraft flying. Be it keeping passengers safe with our emergency power generation systems or creating a positive in-flight experience through reliable cabin pressure controls and quieter engines, Power & Controls focuses on delivering a best-in-class experience to our customers. We hire the top people in the industry. Their ideas drive our performance, and their integrity keeps our customers happy. Join us as we take flight! WE ARE REDEFINING AEROSPACE. *Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. The salary range for this role is $30.95/hr. The salary rate provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Skill Source is a leading placement service specializing in manufacturing operations both on the production floor and front office. We work hard finding the right complimentary fit for both client and qualified candidates. We facilitate this by asking not just the right questions technically but the right questions to fit you personally. We have a substantial client base to work with so there is a very good chance we can find you the next step in a more satisfying career. Submit your hard earned resume today and let us see what we can do for you! Job Description Experienced Tool and Die Maker needed on 1st shift at our aerospace investment casting client near Oneida, NY. Direct-permanent position, not a temp, with competitive compensation and benefits. Qualifications Previous investment casting tool & die experience REQUIRED. Associate's degree or apprenticeship, or equivalent in professional T&D experience in investment casting necessary. Building, maintenance and repair of investment casting dies & molds, practical knowledge of FeatureCAM all needed. NOTE: Applicants not credibly possessing these qualifications will not be accepted for evaluation. Additional Information These are permanent positions NOT contract! Excellent pay (Pay commensurate with experience) and benefits packages! Some of our clients pay FULL medical! Please feel free to review our other opportunities at ***************************

Expectations Set Up machining centers according to standard work instructions (Routing) Use best practice and standard operating procedure (SOP) as trained Produce in tolerance set up pieces Follow temporary manufacturing deviation request (TMDR) procedure when changes are required De commission machine after operation Build / tear down tooling as needed Inspect tooling for wear, advise supervision as necessary Maintain tool crib organization and cleanliness Maintain machine operating condition - oils, coolant & filters Communicate with supervisor if any direction is unclear Load parts on machine according to standard work instructions Use best practice and standard operating procedure (SOP) as trained Communicate with supervisor if any direction is unclear Inspect parts according to standard work instructions Use in process inspection methods to verify non-conforming material Stop machine and notify supervisor when non-conforming material is detected. Tag material with defect description Sort and contain all additional non-conforming material according to SOP Work with peers as directed by supervisor Deburr parts according to standard work instructions Produce desired results and visually inspect for abnormal conditions Work in a team environment to achieve production goals Run / clean multiple machines as directed Work with peers as directed by supervisor to achieve all production goals stated above #LI-AC1 Founded in 1923, Applied Industrial Technologies (NYSE: AIT) is a leading value-added distributor and technical solutions provider of industrial motion, fluid power, flow control, automation technologies, and related maintenance supplies. Our leading brands, specialized services, and comprehensive knowledge serve MRO and OEM end users in virtually all industrial markets through our multi-channel capabilities that provide choice, convenience, and expertise. Applied Industrial Technologies is built on a philosophy that puts people first. We are an equal opportunity employer, and we are committed to a workforce in which we enforce fair treatment and provide growth opportunities for everyone. All qualified applicants will receive consideration for employment regardless of age, race, color, national origin, genetics, religion, gender, marital status, physical or mental disability, or any other characteristic protected by applicable laws, regulations, and ordinances.

We are seeking CNC Machinists (all shifts) at our Canastota, NY facility. CNC Machinist position performs a variety of basic machining practices involved in turning, milling, drilling, and threading operations on turbomachinery components and assemblies to ensure compliance with specifications and quality requirements, ESSENTIAL FUNCTIONS: Operate and monitor CNC machine to ensure proper functionality. Perform routine in-process inspections and document results in accordance with established quality control procedures. Perform daily housekeeping and machine maintenance tasks to ensure safe/effective machine operation. Adjust machine as needed for changeovers, different functions, or other varying needs of production. Perform all other duties/tasks as assigned by CNC Shift Lead and/or Supervisor JOB REQUIREMENTS: Education: High School Diploma, GED from an accredited school or institution or equivalent years experience. Knowledge requirements: The requirements below are the minimum requirements an employee needs to fulfill this position. They are representative of the knowledge, skills and ability required for the position. CNC operator, minimum 3 years of experience Manual machines and band saws Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and calipers. Utilize hand tools and have basic mechanical abilities. Ability to read blueprints and drawings. Problem solving skills. Strong hand-eye coordination Must have positive attitude and ability to multi-task, working in a fast-paced, ever-changing environment. Understand safe machine practice Other Information: Special Information (Travel required, physical requirements, background checks, valid license, on-call schedules, weekend rotations, lifting to 75 lbs.) The position will be based full time in our Canastota, NY facility. Evening and weekends depending on company needs. Able to understand, read, write, and speak English proficiently. Legal to work in the United States Able to pass a pre-employment drug and alcohol test, physical and background check. Physical Requirements While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 75 lbs., walk, climb, reach, kneel, crawl, and balance. Must be able to use hands for assembly and tool usage. This position requires repetitive motion ability. Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel. Work Environment While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles.

At Incodema3D, we are creating a culture and organization that is truly unique. We focus on innovative additive manufacturing technology in support of aerospace, defense, and other industrial applications. We value the commitment of our employees and strive to create a positive working environment where people can do their best. We are seeking a highly motivated and detail-oriented CNC Machinis t to join our dynamic Machining team. In this role, you will be a key player in bridging the gap between innovative additive manufacturing and the demanding requirements of precision machining. This is a fulltime position working Monday through Friday from 6:00am until 2:30pm. What you'll do: You will be responsible for the hands-on machining of complex, additively manufactured parts, transforming them into finished products with exacting specifications. Your role will involve: Precision and setup : Perform complex machine setups, including selecting and loading the appropriate tools, fixtures, and materials for advanced CNC mills, lathes, and other machinery. Blueprint mastery : Interpret and translate complex technical blueprints, drawings, and CAD/CAM files, applying your strong knowledge of GD&T to determine the most effective machining methods. Real-time adjustments : Operate and monitor advanced CNC equipment, running programs, performing measurements, and making real-time adjustments to ensure all parts meet precise tolerances. Expert troubleshooting : Proactively diagnose and resolve machine malfunctions or process issues to minimize downtime and maintain impeccable production quality. Quality assurance : Conduct meticulous dimensional inspections using precision instruments like micrometers, calipers, and gauges, documenting all data according to quality plans. Operational readiness : Manage job status and time, including requisitioning necessary tooling to ensure you and your team are always ready for the next challenge. Safe and organized workspace : Uphold the highest safety protocols, perform routine machine maintenance, and maintain a clean, organized workspace. Who you are: Your qualifications A high school diploma or GED equivalent. At least 4 years of hands-on experience setting up and operating CNC mills, lathes, and machining centers (e.g., HAAS or similar controls). Demonstrated expertise in reading and interpreting complex blueprints and CAD files, with a strong working knowledge of GD&T. Proficiency with precision measuring equipment, including calipers, micrometers, digital indicators, and gauges. Strong computer skills, with experience in G-code editing and CAM software. Exceptional problem-solving and troubleshooting skills, a strong attention to detail, and a high degree of accuracy. Excellent interpersonal and communication skills for effective team collaboration. Benefits: Competitive salary Health and dental insurance Paid company holidays Paid time off 401K retirement plan Equal Employment Opportunity: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. In the event you require special assistance or an accommodation to apply due to a disability, please contact us at **************. ITAR Requirements: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3),or eligible to obtain the required authorizations from the U.S. Department of State. Sponsorship is not available.

Job DescriptionCNC Machinist - Direct Hire!Starting pay: $37,440/hour, depending on experience Days: Monday- FridayHours: 2nd shift 3:30 p.m. - 12:00 a.m. p.m. Staffworks is seeking a reliable CNC Machinist for a direct placement for their award-winning client! What's in it for you? Great starting rate Immediate hire on to the company Benefits! CNC Machinist Details: Operates a CNC milling machines. At specified frequencies, uses a variety of hand inspection tools such as but not limited to micrometers, calipers, indicators etc. to compare a part dimensions with the blueprint or process and records the data on the required paperwork. Loads feed mechanism by lifting stock into position. Verifies settings by measuring positions, first-run part, and sample work pieces; adhering to international standards. Maintains specifications by observing milling operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes. Proactively supports the ISO process approach to quality management and the Syteline MIS system. CNC Machinist Qualifications: Technical, BOCES, or high school graduate with experience in blueprint reading, using measuring instruments, and manual or CNC machine center operation or equivalent and one (1) year of experience. Ability to read prints, diagrams, and use micrometer, verniers, calipers, and gauges. Strong attention to detail. We are an Equal Opportunity Employer and celebrate diversity at all levels of our organization. How to Apply:www.staffworkscny.com(315) 455-9675 "INDITES"

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do: * Demonstrate proper work methods and procedures with use of tools and equipment * Run written CNC programs OR operate Kasto saws with minor supervision * Produce a number of uncomplicated parts that shows good faith in obtaining the desired production rate and quality * Perform walk around of machines * Support the cell's continuous improvement and all CORE and EH&S initiatives, including wearing required personal protective equipment * The position will work a schedule of Monday - Thursday (4x10) 2:00pm - 12:00am (7th shift) Qualifications You Must Have: * High School diploma or GED equivalent Learn More & Apply Now! * Must have a strong attendance record * Must have excellent interpersonal communication skills * Must be able to work hours outside of the regular shift * Must have good mechanical aptitude * The position requires ascending, descending stairs, standing for extended periods, bending, squatting, twisting, overhead reach, and lifting up to 25 pounds. In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. The pay range is $21.00 per hour; however, Raytheon Technologies considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, location, education/training, and key skills. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Our Auburn Pump and Motor Repair Shop is looking for a skilled Machinist to join the team. Primary Functions At the direction of the Shop Management the Machinist is to perform typical duties of a traditional manual machinist working with horizontal lathes, vertical milling machine, general machine shop equipment: band saws, Bridgeport drill presses, grinders, as well as some welding. Machinist Essential Responsibilities Set up and operate conventional lathes, mills, balancing equipment, and commutator profiler. Ability to machine housings, shafts, keyways, and sleeves. Must be familiar with common industry tolerances and fits for motor repair. Fabricate products to meet established quality standards and the requirements of our customers. Establish and follow maintenance schedules for shop equipment. Provide technical expertise as needed. Maintain a neat and orderly work area at all times. Organize and maintain personal and shop tools and equipment. Willing and able to work OT as required. Machinist Necessary Qualifications 5 years mechanical assembly and disassembly experience preferred. Ability to read mechanical prints and schematics. Ability to work independently and in a team setting. Basic knowledge regarding use of a PC. Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists, etc. Mechanical aptitude and basic understanding of electrical theory required. Valid and clean NYS driver's license to operate company vehicles as needed. Machinist Physical Requirements Ability to stand for up to 8 Hours. Ability to lift 50 pounds. Ability to work on elevated platforms. Ability to climb ladders. This position may require standing, stooping, bending, kneeling, crouching and/or reaching. You may be exposed to dust, loud noises, and hot and cold conditions. Good hand-eye coordination and fine motor skills may be required for hand tools, power tools, and other machinery. Salary Range between $20 - $30/hour. Competitive Benefits Package Health insurance (medical, dental, vision) PTO program and paid holidays 401K EAP Learn more about us here: ************************************* Follow us on LinkedIn: ******************************************************* About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Title: SWISS CNC Machinist Company Overview: At AVStar, we pride ourselves on delivering superior products in the general aviation sector. We are committed to fostering a fast-paced, collaborative environment where your contributions truly matter. Join our dedicated team and play a crucial role in our mission to achieve customer satisfaction and company success. Position Summary: We are seeking an experienced CNC SWISS Machinists to join our team. This role offers hands-on challenges and opportunities for growth as you work with a diverse array of parts in a supportive environment. If you are passionate about manufacturing processes and want to be part of a brilliant, cohesive team, we want to hear from you! Key Responsibilities: Levels of Key Responsibilities Level C Key Responsibilities: Operate 4 axis and below Mills and Turning centers Efficiently monitor multiple pieces of machinery simultaneously Ability to use Mics, Calipers, and simple plate inspection techniques Inspect and record critical features on parts using hand tools, surface plates, and comparators Ability to read and interpret most blueprint dimensions Preset tooling per the tool sheet Level B Key Responsibilities: All level C from above Simple setups on 4 axis and below Mills and Turning centers Perform simple to semi complicated prove-outs of new programs (4 axis and below) Operate 5 axis mills and Mill turn machines Operate Swiss machinery Use independent judgment to offset tooling and work coordinates Operation of CMM for verification Minor CNC program edits Level A Key Responsibilities: All from levels B and C above Efficient setups on all CNC equipment Perform prove-outs efficiently on complicated setups and parts Ability to calculate, perform, or suggest complex changes to part programs Trainer in mechanical inspection techniques Trainer on all CNC equipment Demonstrated leader, willing to help others learn and grow Qualifications: Strong knowledge of blueprint reading. Adequate math skills. Key Competencies: Fundamental knowledge of CNC machining principles. Mechanical inclination. Team-oriented mindset. Compensation: Starting Pay: $20.00 - $37.00/hr, depending on experience. Work Schedule: Monday to Friday, 7:00 a.m. - 3:30 p.m. Benefits: AVStar offers a generous benefits package, including: Health insurance with substantial company contribution. Simple IRA retirement plan with employer match. Dental and vision insurance. Life insurance. Paid time off. 9 paid holidays. Equal Opportunity Employer: AVStar is an Equal Opportunity Employer (Disability/Veteran) and is a drug-free workplace.

Skill Source is a leading placement service specializing in manufacturing operations both on the production floor and front office. We work hard finding the right complimentary fit for both client and qualified candidates. We facilitate this by asking not just the right questions technically but the right questions to fit you personally. We have a substantial client base to work with so there is a very good chance we can find you the next step in a more satisfying career. Submit your hard earned resume today and let us see what we can do for you! Job Description Experienced Tool and Die Maker needed on 1st shift at our aerospace investment casting client near Oneida, NY. Direct-permanent position, not a temp, with competitive compensation and benefits. Qualifications Previous investment casting tool & die experience REQUIRED. Associate's degree or apprenticeship, or equivalent in professional T&D experience in investment casting necessary. Building, maintenance and repair of investment casting dies & molds, practical knowledge of FeatureCAM all needed. NOTE: Applicants not credibly possessing these qualifications will not be accepted for evaluation. Additional Information These are permanent positions NOT contract! Excellent pay (Pay commensurate with experience) and benefits packages! Some of our clients pay FULL medical! Please feel free to review our other opportunities at ***************************

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. **So, calling all curious.** Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. **Are you ready to go beyond?** **What You Will Do:** + Demonstrate proper work methods and procedures with use of tools and equipment + Run written CNC programs OR operate Kasto saws with minor supervision + Produce a number of uncomplicated parts that shows good faith in obtaining the desired production rate and quality + Perform walk around of machines + Support the cell's continuous improvement and all CORE and EH&S initiatives, including wearing required personal protective equipment + The position will work a schedule of Monday - Thursday (4x10) 2:00pm - 12:00am (7th shift) **Qualifications You Must Have:** + High School diploma or GED equivalent **Learn More & Apply Now!** + Must have a strong attendance record + Must have excellent interpersonal communication skills + Must be able to work hours outside of the regular shift + Must have good mechanical aptitude + The position requires ascending, descending stairs, standing for extended periods, bending, squatting, twisting, overhead reach, and lifting up to 25 pounds. In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: **Onsite:** Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. _The pay range is $21.00 per hour; however, Raytheon Technologies considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, location, education/training, and key skills._ **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.