Machinist jobs in Texas - 562 jobs

National Pump Company, a global leader in engineered pump solutions for municipal, industrial, and agricultural markets, is seeking an experienced Manual Machinist for our Lubbock manufacturing facility. The Manual Machinist is responsible for setting up and operating manual machining equipment to manufacture, repair, and modify pump components to precise specifications. This role requires strong knowledge of machining practices, blueprint interpretation, and precision measurement, with a focus on quality, safety, and productivity in a pump manufacturing environment. Manual Machining Operations Set up and operate manual lathes, mills, drill presses, grinders, and related equipment Machine pump components such as shafts, impellers, casings, wear rings, and bearing housings Perform turning, boring, milling, drilling, tapping, facing, and threading operations Maintain required tolerances and surface finishes per specifications Select appropriate cutting tools, speeds, and feeds based on material and job requirements Perform routine maintenance and cleaning of manual machining equipment Inspect machines for wear or malfunction and report issues as needed Properly handle, store, and maintain cutting tools, fixtures, and gauges Blueprint and Specification Interpretation Read and interpret engineering drawings, blueprints, routings, and work instructions Understand geometric dimensioning and tolerancing (GD&T) as applicable Verify dimensions, materials, and machining requirements prior to production Clarify discrepancies or unclear instructions with engineering or supervision Inspection and Quality Control Measure parts using micrometers, calipers, indicators, bore gauges, and other precision instruments Perform in-process and final inspections to ensure conformance to specifications Document inspection results as required Identify and correct machining errors or quality issues promptly Safety and Compliance Follow all safety procedures, including lockout/tagout and PPE requirements Maintain a clean and organized work area in accordance with 5S principles Comply with company policies, quality standards, and regulatory requirements Actively participate in safety meetings and continuous improvement initiatives Collaboration and Production Support Work closely with supervisors, engineers, and other machinists to meet production schedules Assist with troubleshooting machining or process issues Support cross-training and knowledge sharing within the machine shop Participate in continuous improvement and efficiency efforts Qualifications High school diploma or equivalent Minimum 2 years of experience as a manual machinist (pump or heavy industrial manufacturing preferred) Proficiency with manual lathes and mills Strong understanding of machining principles and tolerances Ability to read blueprints and use precision measuring tools Physical Demands Frequently stand, walk, bend, and reach throughout the work shift Lift and move materials between 70 and 100 lbs with or without assistance Manual dexterity and visual acuity required for precision work Exposure to noise, metal chips, cutting fluids, and industrial environments Work Environment Manufacturing shop environment Use of industrial machinery and tools Required use of personal protective equipment What We Offer Competitive wages and profit sharing Comprehensive benefits package including medical, dental, vision, 401(k), Age and Service, Stock Purchase, etc. Opportunities for professional growth within a respected, long-standing organization A collaborative culture focused on safety, quality, and continuous improvement About National Pump Company National Pump Company designs and manufactures high-quality pumping solutions used worldwide in critical infrastructure applications. With a history spanning more than 50 years, we are committed to innovation, reliability, and operational excellence.

Machinists ensure the continued operation of equipment by performing preventive maintenance and/ or breakdown repairs on machinery, rotating equipment, and mechanical systems. These tasks are completed following diagrams, sketches, operations manuals, manufacturer's instructions, engineering specifications, journeyman troubleshooting protocols, and following procedures. Locates source of problems by observing mechanical devices in operation, listening for problems, using precision measuring and testing instruments, and utilization of equipment history failure knowledge. What will be expected from you? Removes defective parts by dismantling devices using maintenance tools hoists, cranes, hand and power tools, ladders, lifts, etc. Examines form and texture of parts to changes in the dimensional requirements of parts, inspecting and using measurement devices such as rulers, calipers, micrometers, and others. Replaces parts or rebuilds systems as necessary to maintain cost effectiveness of equipment and prevent mechanical failure. Maintains mechanical knowledge by documenting and communicating actions, irregularities, and continuing needs. Maintains equipment, parts, and supplies inventories by checking stock to determine inventory levels, and anticipating parts and equipment needs and communicating these needs. Team to identify process problem areas and learning how to communicate them up and through the organization using appropriate means of communication. Gain hands on experience using and implementing SAP records for tracking and managing maintenance daily activities. Participate in job hand-offs to fellow associates and conduct key operator communications to help properly diagnose malfunctions and to communicate progress of repairs. Maintains technical knowledge by attending educational workshops, reviewing technical publications, and completed all site required computer-based training. Participates in audits, investigations, HAZOPs, PHA's and quality efforts in the areas as needed. Maintains good housekeeping of equipment, parts storage, and shop work areas. Controls downtime by alerting production employees of routine preventive maintenance techniques, how to avoid equipment stresses via operational adjustments. Ensure that the activities are carried out to comply with the integrated management system, as applicable (safety, food safety, GMP, health, environmental, quality and responsible care requirements). Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. If applicable, ability to work overtime may be needed to ensure required staffing capacity to meet daily production objectives. Work collaboratively with team members with different backgrounds and perspectives. Assists other employees in accomplishments of Indorama company goals. Follows instructions and performs other duties as may be assigned by supervisor. Participates in Environmental, Health, & Safety initiatives as set forth by the company. Participates in and completes company required training programs. What are we looking for in the Ideal Candidate? Minimum of 10 years of experience working with rotating equipment and related machinery as a journeyman machinist/millwright required, education or apprenticeship may possibly be substituted for some years of experience. Machine shop equipment experience including manual lathe, balance machine, milling machine, drill press, and surface grinders. Possession of a Millwright, Industrial Millwright or Machinist NCCER certificate or comparable technical certificate is a plus. NOTE: Having any of these certificates can count towards some years of experience. Must possess or be eligible to obtain a Transportation Worker Identification Credential (TWIC). Must have a level of proficiency with SAP, Internet, Email and Microsoft Office programs. Demonstrate a satisfactory level of technical and professional skills/knowledge in the millwright discipline. Demonstrate knowledge and experience with all commonly used concepts, practices, and procedures within the millwright field. Knowledge of Reverse, Rim/Face, and Laser Alignment Methods Must be able to climb ladders and stairs. Must be able to work at elevated heights and work in confined spaces.

JOB TITLE: Tool and Die Maker - CNC Operator PAY RATE: $26-31/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Fabricate, repair, and maintain tools, dies, and fixtures used in the manufacturing process Interpret engineering drawings, blueprints, schematics, and specifications to produce precise tooling components Operate manual machining equipment, including lathes, milling machines, and grinders Use precision measuring instruments in the shop and on the aircraft to ensure accuracy and quality Collaborate with engineers and team members to develop effective tooling solutions Perform inspections and quality checks to ensure compliance with specifications and standards Support Aircraft Structures III work, including assembly, installation, and repair tasks as needed Fabricate aircraft parts in support of production and maintenance operations Requirements: Regular and predictable attendance is required High School Diploma or GED required 5+ years of experience as a Machinist or Tool Maker 5+ years of experience operating manual mills and manual lathes 5+ years of experience reading and interpreting engineering drawings, blueprints, schematics, and specifications 5+ years of experience using precision measuring tools Ability to lift up to 35 lbs Ability to stand for extended periods Must be a U.S. Citizen (as defined by ITAR). Preferred Qualifications: 5+ years of experience as a Tool and Die Maker Knowledge of Aircraft Structures III processes Flexibility to support Aircraft Structures III tasks as required Strong communication and teamwork skills Excellent problem-solving abilities and attention to detail About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!

Overview & Responsibilities To perform most complex setups and machine a variety of components on a variety of machine tools. Able to perform work in a safe and timely manner to meet customer needs. Ability to work extremely close tolerances. Ability to layout and plan machining operations from prints, sketches or verbal instructions with limited supervision. The below reflects general details considered necessary to describe the principal functions of the job identified and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Responsibilities: Promotes safety and quality at all times. Maintain a clean and organized work area. Conducts him or herself in a professional manner at all times when working with internal and external customers. Advanced knowledge of machine equipment and machining operations of various machines: horizontal and vertical lathes, layout machines, vertical boring mills, horizontal mills, grinders, deburring tools, fixtures, radial and angular drill press, forklifts, cranes and various forms of rigging, jib hoists, personal computers, and other required tools necessary to perform the job. Advanced knowledge and accuracy in using various measuring devices: micrometers, indicators, calipers, gauges, and other required tools necessary to perform the job. Full understanding of use for tooling, drawings, work scopes, procedures, specifications and documentation to perform the primary function of the job. Performs most complex setups and machine tool operations. This includes turning, boring, facing, milling, drilling, reaming, tapping, sawing, slotting, grooving, grinding, and other required actions to complete the job. Ability to work to extremely close tolerances. Ability to read and comprehend drawings, sketches, job scopes, and verbal instructions. Maintains equipment by completing basic preventive maintenance requirements and notifying the appropriate representative for troubleshooting and repairs. Able to accurately measure and record all dimensional inspections as needed and pass annual dimensional inspection tests. Ability to complete layouts of most parts. Ability to train other employees in operation of equipment, reading prints, selection of tooling and machining equipment, along with repair processes. Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs. Documents actions by completing production and quality logs. Accepts ownership over work performance and stays abreast of job knowledge and new skill development. Qualifications: High School Diploma or Equivalency 5-8 years' experience with rotating turbo machinery Advanced rigging capabilities Advanced machining capabilities on manual lathes Experiences with turbines, compressors and other rotating equipment Equal Employment Opportunity Ebara Elliott Energy is an equal employment opportunity/affirmative action employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, marital status, genetic information, disability, veteran status, or any other characteristic protected by the federal, state or local laws of the United States. Applicants and employees are protected under U.S. federal law from discrimination. To learn more, click here . To learn more about our Job Applicant Privacy Notice, please click here . No agency submissions please. NOTE: Resumes submitted to any Ebara Elliott Energy employee without a current, signed and valid contract in place with the Ebara Elliott Energy recruiting team will become the property of Ebara Elliott Energy and no search fees will be paid.

Welcome to the intersection of energy and home services. At NRG, we're all about propelling the next generation of leaders forward. We are driven by our passion to create a smarter, cleaner and more connected future. We deliver innovative solutions that make our customers' lives easier-helping them power, protect, and intelligently manage their homes and businesses. To do this, we need creative and talented people to join our company. We offer a dynamic work environment and a unified and inclusive culture. NRG fosters a strong sense of belonging that leads to better collaboration and business performance. Our company programs are designed to help employees develop the skills they need for success now and in the future. In everything we do, we aim to champion our employees and bring value to our customers, investors and society. More information is available at ************ Connect with NRG on Facebook, LinkedIn, and follow us on Twitter @nrgenergy. Summary: Provide manual machinist support of power generation equipment in the Central Repair Shop. Provide mechanical maintenance support to maintain equipment in an electrical generating power plant; may perform Head Mechanic duties during absence of a Head Mechanic. Essential Duties/Responsibilities: Recognizes safety hazards and follows safety guidelines for personal protection, protection of fellow workers and the protection of the public. Knowledgeable of environmental rules and regulations, and effectively apply them to all work situations. Ability to operate manual lathes to 138” swing, manual boring mills to 17' swing, and large manual horizontal boring machines. Installs, maintains tests, inspects, and repairs generating station equipment such as boilers, turbines, pumps, condensers, heat exchangers, and pressure vessels. Replaces bearings, packing in pumps and valves, shaft seals, sleeves, seats, and other miscellaneous parts used in plant equipment. Works with apprentice mechanics and skill enhancement employees to teach proper, safe use of tools and maintenance procedures. Employee must arrange own transportation to work location and may be reassigned to another location at the Company's discretion. Working Conditions: Machine Shop and Power Plant environment Power Plant Environment-Work both inside and outside in all temperatures and climate conditions in accordance with Heat Stress procedures. Work around large rotating equipment, energized electrical equipment in high noise areas, and/or in confined places, on elevations in excess of 250 feet, or from platforms at heights of 5 feet or greater. Climb stairways, ladders, and work from aerial devices Must be prepared to work irregular or rotating shifts and respond to emergency callout 7 days a week, 24 hours a day. Ability to work in mentally stressful environments: must be able to react to crises where immediate action is required to correct or curtail potentially damaging or hazardous situations Must be able to wear personal protective equipment (PPE) as required i.e.…steel-toed boots, respirators, goggles, safety glasses etc. Minimum Requirements: High school diploma, GED or equivalent knowledge of English, mathematics and grammar. Journey level mechanical aptitude skills and adequate industrial mechanical maintenance experience (minimum 3 years' apprentice program or other training) in the repair, inspection, and/or maintenance of related power plant or machine shop equipment including inspection and preventative maintenance, troubleshooting, fabricating and diagnostics 5 years' Machinist experience required Large lathes, mills, vertical boring machines and horizontal boring machine. Strong math skills. Preferred Qualifications: Have necessary skills and adequate industrial mechanical maintenance experience in the repair, inspection, and/or maintenance of related power plant or machine shop equipment including inspection and preventative maintenance, troubleshooting, fabricating and diagnostics. Additional Knowledge, Skills and Abilities: Ability to use hand tools (e.g. wrenches, screw drivers, sledge hammers, etc.) Ability to operate Company vehicles and equipment (e.g. forklift, mobile crane, etc.) and maintain operating licenses and certifications. Valid state Driver's License is required. Knowledge of rotating equipment and general industrial maintenance activities and procedures. Ability to operate oxygen and acetylene torches. Ability to operate machine shop equipment (i.e. drill presses, lathes and boring mills). Ability to follow, interpret and act on written and verbal job instructions, and reports, technical manuals and data. Ability to use basic math and geometry. Ability to use measuring devices such as micrometers. Ability to calculate measurements and computations used to repair and maintain power plant equipment. Ability to use a personal computer and associated software. Ability to Tag Out/Lock Out equipment per NRG Tag Out/Lock Out procedure. Ability to diagnose and correct mechanical equipment troubles and repairs or recommend major repairs. Ability to perform preventative and corrective maintenance procedures on mechanical equipment. Ability to perform plumbing and pipe fitting tasks. Ability to set up rigging for installing and removing equipment. Ability to order proper materials for job completion. Ability to complete required records for work performed. Ability to clean work area routinely. Ability to certify as a “code” welder with proper training. Ability to use gases and/or arc welding equipment for mechanical repair and fabrication of plant equipment. Ability to remove and replace insulating materials with proper training. Physical Requirements: Daily work expectation requires ability to perform tasks by walking, standing, sitting, kneeling, crouching, squatting, twisting, pushing, pulling, shoveling, climbing, and working with hand tools (up to 25 pounds) in position above and below head and extended from body to complete repairs. Lift, carry, position and use tools and/or equipment (weighing up to 50 lbs.) in awkward positions, swing various weights of sledge hammers, stoop and bend to reach valves, pull on chain-falls or come-a-longs. Ability to twist the body and neck while driving company vehicles or operating company equipment. Performance of duties may cause frequent jarring of the body. Work with and around hazardous and non-hazardous materials (reference the waste management guidance manual). Ability to discern and respond to verbal and auditory signals. Ability to discern assorted colors This job description reflects an assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. Other duties and tasks may be assigned to this job at the Company's discretion. Please Note: Salary offered will be commensurate with the successful candidate's education and/or experience and in accordance with the Collective Bargaining Agreement covering this position. NRG Energy is committed to a drug and alcohol-free workplace. To the extent permitted by law and any applicable collective bargaining agreement, employees are subject to periodic random drug testing, and post-accident and reasonable suspicion drug and alcohol testing. EOE AA M/F/Protected Veteran Status/Disability. Level, Title and/or Salary may be adjusted based on the applicant's experience or skills. EEO is the Law Poster (The poster can be found at ************************************************************************ Official description on file with Talent.

Brief Description: The Sr. Machinist will oversee work on a manual lathe which ensures cutting a variety of mud motor parts. All machinists should ensure each part of all measurements are accurate and that all parts are usable after cutting. This role is also responsible for visual inspection of all parts upon completion and QA/QC of all parts before being taken out of lathe. The Sr. Machinist role will report directly to the Machine Shop Supervisor (Production Foreman). Detailed Description: Oversee inspection of all parts produced or machined Repair all equipment brought to the machine shop Provide effective QA/QC procedures during production Ability to work independently in troubleshooting and resolving problems concerning machining operations Perform secondary machining operations on components parts as required Perform detailed analysis of the component parts configuration/dimensions to determine efficiency in machining operations required for production Assess worn parts to determine whether they need to be repaired or replaced Work with engineering and fellow supervisory personnel to troubleshoot and resolve design equipment and work through operating difficulties Perform preventive maintenance duties as scheduled by the maintenance department Provide training of lower-level machinists, answering work questions, resolving operating difficulties and reviewing completed work assignments Document inspections, test results, repair work done Oversee cleanliness and organization of the shop Ensure that all equipment is clean and in good working order Safely operate forklift to move equipment around the yard Load machine with workpieces or raw materials Strong familiarity with CAD drawings and geometric dimensioning testing Performs other related duties as assigned Job Requirements: Solid experience using various measuring equipment Ability to operate an overhead crane Clear vision to judge near and far distances to maintain awareness of reporting ongoing work activities to coworkers and third party Maintain spatial orientation and awareness to safely move around work environment with many moving objects Knowledge and experience with tools and materials Broad knowledge of machining techniques to perform advanced setup operations Proficient in the use of cutting tools & measuring equipment Ability to read and understand blueprints drawings Ability to work independently to troubleshoot and resolve problems concerning machining operations and tools Ability to lead by example and be a good mentor to junior employees Demonstrate clear written and verbal communication skills, including ability to promptly give and follow directions when working with others Ability to handle multiple projects and supervisors at once Must have good interpersonal and communication skills including ability to interact productively with coworkers and third parties Ability to use a variety of hand and power tools to perform a range of mechanically oriented functions including independent use of heavy-duty handheld and long-handled tools Ability to safely navigate the shop work sites with occasional walking, climbing, standing, stepping, etc. during normal operating conditions (day/night, outdoor hot/cold weather) Lift and carry 50 pounds independently while potentially walking on uneven surfaces Bend, stoop, kneel, twist, and crawl occasionally during visits to field and operational work areas Listen for unusual noises that signify equipment and machinery problems Stay alert and focused up including occasional extended work periods Must be willing and able to be on call after hours and work on weekends Wear Personal Protective Equipment (PPE) at all designated times Good computer skills and proficiency in Microsoft Office Minimum Qualifications: High school diploma or GED equivalent 5+ years of experience running a manual lathe Must live within a 1 hour driving distance of the shop Availability to work on call rotation as well as overtime Experience machining API connections and/or tapered connections. Preferred Qualifications: Experience training junior machinists Additional Details: The Sr. Machinist must work with an emphasis on safety for themselves and others including coworkers and third parties. The typical work environment will be in the shop or field which will require exposure to outdoor weather conditions, loud noise, working near moving mechanical parts, electrical energy, construction equipment, vibration, fumes, chemicals and airborne particles.

Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we will encourage and empower you to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be the best solution for the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! ************************************* Summary: The Manual Machinist will review samples, drawings or instructions to understand specifications of output, plan the sequence of necessary actions for the completion of a job, take measurements and mark material for cutting or shaping, select appropriate machines (e.g. lathes) and position or load material for a job and perform routine machine maintenance and repair minor damages. Currently seeking a Manual machinist to join our Tyler, TX location Responsibilities of the Manual Machinist include, but are not limited to: * Review samples, drawings or instructions to understand specifications of output * Plan the sequence of necessary actions for the completion of a job * Take measurements and mark material for cutting or shaping * Select appropriate machines (e.g. lathes) and position or load material for a job * Determine and program size of batches, speed of machine etc. * Monitor machine while working to adjust the feed, maintain temperature and identify issues * Check output to ensure consistency with specifications and discard defects * Keep records of approved and defective units or final products * Perform routine machine maintenance and repair minor damages #LI-CB1 #zrcb Qualifications of the Manual Machinist include, but are not limited to: * Proven experience as machinist * Experience in using and/or programming manual, semi-automated or automated tools and machines (lathes, grinders etc.) * Ability to use precision tools (e.g. calipers) to take accurate measurements * Knowledge of the properties of metal and other material * Ability to read blueprints, schematics and manuals * Good at math with analytical abilities * Physical stamina and strength to lift heavy items * High school diploma or equivalent; completion of vocational training or an apprenticeship will be an asset Additional Information: Physical Demand: Physical and Lift up to 50 lbs. unassisted Working Conditions: Indoor Shop Environment Training/Certifications: NA Shift Time/Overtime: Night Shift from 6:00 am - 3:30pm with OT possibility Monday through Friday. Travel: No Education: High school or GED Location: USA:TX:Tyler DXP is always looking for individuals who want to join a team of employees who have the desire to achieve remarkable accomplishments together. The culture of the organization is supportive and goal oriented with high expectations, yet it is an environment where the team spirit inspires everyone to do their best. All DXP employees play a vital part in the organization and are treated with respect. By applying to DXP, you will have the opportunity to speak with some of the most respected professionals in the industry. DXP offers a comprehensive benefits package for full-time regular employees, normally working a minimum of 30 hours per week including: Medical, Dental, Vision, Flexible Spending, 401(k), paid holidays, Life and Disability Insurance, and additional supplemental products. All part-time and temporary employees are eligible for 401(k). Minimum Required Salary and benefits commensurate with experience. We are an equal opportunity employer. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. EOE/M/F/D/V

TempToFT Manual Machinist need 2 or 3 people manual machinist 2-3 years experience MUST HAVE OWN TOOLS HSD or GED Preferred Math skills important trustworth and comitted Hours 3pm-11pm Mon-Fri Insurance Carrier: Blue Cross/Blue Sheild (PPO Dental Vision) uniforms provided if desired productivity incentives drug test required and NON DOT Physical

Job Description Manual Machinist - Class 3 Department: Machine Shop Shift(s): First & Second Shift Reports to: Machine Shop Manager About Us Fox Innovation & Technologies Inc. (“FOX”) is a global leader in turbomachinery engineering, manufacturing, and aftermarket services delivering advanced rotating equipment solutions for the oil and gas, power generation, and process industries. FOX is more than a service provider. We are an OEM-caliber engineering and manufacturing hub capable of reengineering, revamping, and remanufacturing complex machinery to meet the most demanding operational requirements. Our team combines deep industry expertise with rapid-cycle turnaround and world-class proprietary technologies to deliver OEM or better-quality solutions across centrifugal compressors, pumps, turbines, valves, and other mission-critical rotating equipment. With best-in-class field service capabilities, precision machining, and turnkey project execution, FOX provides the technical horsepower and responsiveness that global operators depend on. Our commitment to quality, safety, and reliability drives everything we do - from the shop floor to the field. The Opportunity The Machinist performs duties to include but not limited to in-house machine work, repairs, and upgrades to customer's machinery and to repair used or manufacture new components per drawings and procedures Responsibilities Assist in shop repairs and machining operations. Learn to manufacture new components per drawings, sketches, and verbal instructions with supervision. Requires attention to detail with very few reworks, rejections, or scrap parts. Coordinate and work closely with Lead Machinist, Manager, Planner and QA/QC to ensure special repair requirements are met. Preparation and packaging components for safe shipments. Learning to debur, hone, polish, and cleanup parts after machine operations. Capable of operating saws to cut stock materials. Organize and maintain an efficient clean machine shop area. Qualifications At least one (1) year of machinist experience. Minimal working knowledge of the manufacture and assembly of close tolerance turbo-machinery components. Exposure to machine shop practices and equipment. Requires manual dexterity and ability to operate manual lathes, mills to repair and manufacture precision parts with supervision. The ability to work with close tolerance equipment under supervision from other machinist and Lead Man. Strong organized work ethic required to work with all involved with repair process from start to completion. Requires machinist problem solving and match skills. Requires proficient verbal and written communication skills (English). Must learn to complete documentation and written reports. Must learn to read drawings and blueprints and accurately read precision measuring tools. Very organized, good interpersonal skills, strong work ethic, “can do” attitude. Ability to understand and comply with regulations and processes in the repair procedures. Requires the ability to work component repairs with direction and guidance from machinist, lead man and Manager. Assist with parts set-ups with other machinist. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodation may be provided to enable individuals with disabilities to perform the functions. Exposure to industrial environments. Must be able to lift up to 50 lbs. Requires sitting, standing, bending, walking, and using hands/tools for extended periods. Occasional extended hours based on operational or customer needs. Equal Employment Opportunity Fox Innovation & Technologies Inc. is an equal opportunity organization. We recruit, employ, train, compensate, and promote without regard to race, religion, color, national origin, age, gender, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values. * Operates machine tools such as lathes, milling machines, and grinders to produce precision parts and instruments. * Reviews engineering specifications for a work order and performs calculations to determine the right tools, materials, and sequence of cutting and finishing operations. * Measures, examines and tests completed units in order to detect defects and ensure conformance to specifications, using precision instruments. * Aligns and secures holding fixtures, cutting tools, attachments, accessories and materials onto machines. * Monitors the accuracy of machining work. Job Qualifications * High school diploma or equivalent preferred. * Previous experience with manual lathes, vertical turret lathe or horizontal boring mills experience required * Ability to read a Calipers and Micrometers preferred. * Ability to provide all hand tools as needed to complete daily tasks specified by the Shop Foreman. Work Conditions Position is based out of Alvin Working in plant and/or shop areas around production machinery with extreme noise levels Must be able to wear safety equipment as required by the safety department for personal protection Physical and Mental Requirements * Ability to lift and carry 75 pounds * Must be able to walk and climb except when performing non-field duties * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells * Ability to maintain focus and multitask effectively * Excellent communication skills This job description is intended to indicate the kinds of tasks and levels of work difficulty required of the position given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of management to assign, direct and control the work of employees under supervision. The listing of duties and responsibilities shall not be held to exclude other duties not mentioned that are of similar kind or level of difficulty. TEAM Industrial Services, Inc. strictly prohibits discrimination against applicants, employees, or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, gender, age, physical or mental disability, citizenship, past, current or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state or local laws. TEAM's Core Values Safety First / Quality Always - In everything we do Integrity - Uncompromising standards of integrity and ethical conduct Service Leadership - Leading Service Quality, professionalism and responsiveness Innovation - Supports continuous growth and improvement Pride and Respect - For our customers, for each other and for all our stakeholders Teamwork - Global teamwork and collaboration

Who We Are: FLANDERS is a world leader in renewing machines for heavy industry, specializing in the largest and most intricate applications. Our expertise encompasses distributing, servicing, repairing, designing, and manufacturing electric rotating machines. Additionally, we take pride in offering cutting-edge AI-powered condition-based monitoring, customized controls, seamless systems integration, and advanced automation solutions. What We Are Looking For: Someone to perform basic lathe/milling operations by utilizing medium size machines including manual lathes/mills. Inspect basic/routine parts for defects and wear. What You Will Do: Machinist - Performs under direction. o Perform milling operations such as drilling, tapping, boring, broaching, and conventional milling and lathe work using various engine lathes including but not limited to horizontal and vertical mills and horizontal boring mills. o Use measuring devices and techniques to ensure proper sizings. o Record data to produce expected service and/or design results including sizings and illustrations. o Understand materials and their various applications in order to complete job. o Use various hand-held and stationary power and non-power tools including but not limited to band saws, belt sanders, hand grinders, and files to complete job. o Lift, tighten, adjust and/or secure heavy objects in order to perform work and observe safety precautions. o Observe all safety procedures and use proper safety equipment including eye, ear, and hand protection. o Maintain a clean, neat, and safe work environment at all times. o Operate and maintain equipment in a safe manner at all times. o Promote strong company image and maintain positive working relationships at all times including professional behavior with customers (very infrequent) and co-workers within department (daily basis). o Provide outstanding customer service at all times. o Perform work according to established company policies and procedures. o Perform other duties as requested. What You Will Need: Education: o High school diploma or equivalent. Experience: o One year machinist experience and/or machine trades technical schooling . Basic mechanical knowledge required. Other: o Ability to perform basic math functions including addition, subtraction, multiplication, and division. Knowledge of trigonometry a plus. o Ability to read, write, and comprehend basic written and verbal instructions. o Ability to understand, perform, and retain various job related training, operational, and safety procedures. o Ability to exercise initiative, judgment, and decision making related to routine duties within set company standards. o Ability to operate overhead cranes, fork lift trucks, and other equipment. Values Statement: Cares for people; shows humility; acts with absolute integrity and trustworthiness; never gives up; continually grows; and demonstrates excellence.

A&A Machine & Fabrication specializes in the manufacture of LDPE High Pressure Piping, Pressure Vessels, Standard Piping, Syngas Burners and Process Skids. A&A is also a full service Machining facility, providing both Manual and CNC capabilities for the Petrochemical Industry. Responsible for operating machine tools to produce precision metal parts. Produces small batches or large quantities of metal parts. Ensure products meet precise specifications Requirements Operate machine tools such as lathes, milling machines, and grinders to produce metal parts. Review electronic or written blueprints or specifications for a job. Calculate where to cut or bore. Shape steel, aluminum, titanium, plastic, silicon and other materials. Determine how fast or slow work piece is fed into machine. Determine how much material to remove. Select tools and materials for the job. Plan the sequence of cutting and finishing operations. Mark the work piece to show where cuts should be made. Position work piece on the drill press, lathe, or milling machine. Monitor and control feed rate and speed. Ensure work piece is properly lubricated and/or cooled. Regulate temperature of work piece. Detect problems by listening for specific sounds. Adjust cutting speed to compensate for harmonic vibrations. Monitor the accuracy of cuts. Replace dull cutting tools. Check accuracy of work against blueprints and specifications. Determine how automated equipment will cut a part. Determine cutting path. Concert path, speed, and feed information into set of instructions for machine tool. Modify programs in response to problems. Physical Requirements: This position is required to have manual dexterity and the ability to maneuver parts in a rotating machine; this includes but is not limited to twisting, turning, bending, and stooping. This position stands for 8+ hours a day; lifting and rotating 25 lbs on a continual basis.

Job Description Searching for someone with experience operating large Horizontal Mill &/or Vertical Lathes. Set up and operate manual lathes, mills, boring mills, vertical lathes, drill press and surface grinder. Perform all operations necessary to produce parts to exact tolerances for products or equipment. Check work for conformity to specifications use of precision measuring equipment. Must be able to read complex drawings. Employee will work with mechanics as required to complete parts machining. Responsibilities and Duties Read technical instructions, blueprints, and sketches for the repair / fabrication of parts and or machinery. Install or repair machinery, equipment and parts Adjust and align moving parts Replace defective parts of machinery as needed. Fabricate parts using lathes, mills, etc. as needed Coordinate with Shop Supervisor to plan and complete general assignment Qualifications and Skills High School Diploma or Equivalent Machinist Certification or Millwright Apprenticeship. Machining 5+ years Knowledge Must be able to read and write English. Must have thorough knowledge in the preparation of and use of mills, lathes and manual machines. Must be capable of machining and fabricating parts per blueprints, BOM, and sketches. Must be able to hold to tight tolerances per print specifications. Able to read and interpret blueprints. Must be knowledgeable in assembling parts, machining, quality control and safety. Thorough understanding of all company safety and environmental practices. Strong quality focus. Strong team player. Must be reliable, dependable, able to work overtime as required and work under minimal supervision. Requires strong math skills: add, subtract, multiply, divide, algebra. Must be able to read various mic's to hold to tolerances as required., and to interact with Front Offices Competencies Works Safely Quality Sense of Urgency Results Driven Team Player Physical Requirements Prolonged Standing Walking, climbing, bending, kneeling, twisting Ability to lift up to 50 lbs. Good Hand/Eye Coordination MUST BE AUTHORIZED TO WORK IN THE UNITED STATES VEVRAA Federal Contractor/EEO/AAP Powered by JazzHR MDOWCgjt31

Location: Baytown, TX Schedule: First Shift, Full-Time Were seeking a skilled Manual Lathe Machinist to support precision machining operations in a heavy industrial setting. This role focuses on shaping and finishing metal componentsespecially pipe ends and fittingsusing manual lathe equipment. Key Responsibilities: Set Up & Operate Manual Lathes: Machine pipe ends and metal parts to exact specifications using manual lathe tools. Read Technical Drawings: Interpret blueprints and mechanical schematics to determine dimensions and tolerances. Precision Machining: Use micrometers, calipers, and gauges to ensure parts meet required standards. Pipe Beveling & Threading: Perform beveling and threading operations on large-diameter pipe sections for field installation. Tool Maintenance: Maintain lathe equipment and ensure tools are sharp, calibrated, and safe to use. Quality Control: Inspect finished components for defects and document measurements and production data. Team Collaboration: Work closely with welders, fitters, and supervisors to meet production goals and resolve machining issues. Requirements: Experience operating manual lathes in an industrial or fabrication environment Strong understanding of machining techniques and metal properties Ability to work independently and follow safety protocols Physical stamina to handle heavy materials and long shifts Shift 7 am -7 pm Monday-Sat Rotating shifts Package Details

Job Description Rotating Machinery Services, Inc (RMS Inc.) is seeking a qualified Manual Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. They perform a detailed incoming inspection using micrometers and other fine measurement tools, learn to draw prints based on their findings and make recommendations on necessary critical repairs. As well rounded machinists and fabricators they are able to select and operate the proper machine shop tools to remove damaged babbitt and prepare the bearing for repair. They may also use raw materials, welding tools, flame spraying, or electrical test equipment to manufacture, alter or test components as part of the process. During the babbitting process they move the part to our custom foundry where they apply new babbitt using various casting techniques. Once the babbitt is cast, their skill at precision machining and metalworking outputs a finished bearing crafted to precise dimensions. Using non-destructive testing techniques and measurement tools they verify the quality and dimensions of their work before preparing the bearing to ship to the customer. JOB REQUIREMENTS AND QUALIFICATIONS Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting. Ability and willingness to work around and use large propane / acetylene. Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand). Advanced oral and written communication. Advanced math skills to calculate tolerances and dimensions. Must be able to read and understand Blueprints and G-Code. Must be familiar with basic machining practices involved in turning, milling, drilling, threading operations. Must be competent reading drawings and following instructions necessary to produce usable and saleable parts. Must be able to hold tolerances as dictated by drawings, written instructions, or industry standards. Must be proficient with the use of, the care of, and the calibration of all types of measuring devices (i.e., micrometers (OD and ID), dial calipers, dial indicators, etc.). Must possess and provide basic tools required for the execution of the position of manual machinist. Must be able to comply with all safety directives and programs established by the Company and or our customers. The above list of activities is not all inclusive but a general representation of the requirements of an RMS Inc. Machinist. This list is subject to change based on the needs of the company. Education: High School Diploma or Equivalent Knowledge and/or Skill Requirements: OMEGA experience Proficient in running horizontal lathes and milling machines. Capable of reading drawings and proper use of calibrated measuring tools. Can hold tolerances of .0005". Read drawings and use of micrometers. Basic machining knowledge and practices required. While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance. Must be able to use hands for assembly and tool. Previous Experience: 5 - 10 years of Manual Machinist experience required. OTHER INFORMATION The position will be based full-time in our South Houston, TX facility. Availability to work weekends, holidays and overtime to meet company needs. Able to understand, read, write, and speak English proficiently. Authorized to work in the United States. Able to pass a pre-employment drug screen, background check and physical requirements. This role can be required to participate in company and/or customers random drug testing requirements. While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 50 lbs. with assistance, walk, climb, reach above head, and balance. Must be able to use hands for assembly and tool usage. Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel. Work Environment: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles. WHAT WE OFFER Competitive Pay Paid Time Off Medical / Dental / Vision 401k Employee Incentive Programs Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! Visit ************************* to learn more about who we are and what we do. ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise-all backed by responsiveness in competitive prices and lead times. RMS' commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Aviation Manual Machinist Build an Aviation Career You're Proud Of Build your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. As an Aviation Manual Machinist, you will perform setup, calibration, maintenance and operation of machining equipment. Produce precision machining cuts on a variety of materials, while cross-training in complementary skills to support production requirements. What you'll do: * Reads and interprets specification manuals, blueprints, templates and layouts to determine machining operation to be performed. * Computes dimensions and tolerances and measures and lays out work pieces. * Verifies dimensions of products for accuracy and conformance to specifications using precision measuring instruments such as calipers, gauges and micrometers. Troubleshoots, debugs and modifies to achieve expected performance. * Adjusts and sets up machine tools for use by machining tool operators. * Participates in continuous improvement of cell processes. * Cross trains in other complementary skills and seeks endorsements for those skills as needed to support production requirements. * Moves between production assignments that utilize multiple skills endorsements as needed to support production requirements. * Participates in the cross training of other technicians as needed to support production requirements. * Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions. * Carries out other duties as assigned. Position Requirements: * High degree of mechanical aptitude, accuracy and precision. * 3-5 years of Manual Mill and Lathe machinist experience is required. * Thorough knowledge of manufacturing, tool design, fabrication methods * Proficient in the use of precision measuring instruments and hand tools. * Ability to read, understand and interpret blueprints. * Strong mathematical aptitude. * Working knowledge of related company instructions, company processes, rework process instructions, original equipment manufacturer manuals, and MSDS labels. * Working knowledge of production management computer systems and other related internal control systems. * Ability to lift up to 25 pounds (unassisted) for approximately 25% of the average workday. * Regularly required to stand for prolonged periods. * Completion of a machinist apprenticeship program; or equivalent. * Attainment of trade certification. * Ability to work day shift, evening shift, or weekend shift as required. * Must be authorized to work in the US. Preferred Characteristics: * Strong problem-solving mindset. * Commitment to continuous improvement. * Team-oriented with effective communication skills. Benefits that make life better: * Comprehensive Healthcare * 401(k) with 100% company match; up to 5% vested * Paid Time Off starting on day one * Bonus opportunities * Health- & Dependent Care Flexible Spending Accounts * Short- & Long-Term Disability * Life & AD&D Insurance * Learning & Training opportunities #LI-GH1

BP Aero Irving, Texas, USA Position Type: Permanent Full Time Hourly Direct Shift: 1st and 2nd Job Description & Key Responsibilities Machine Operation: Set up and operate manual equipment such as lathes, milling machines, and grinders. Technical Interpretation: Read and interpret blueprints, technical drawings, and schematics to understand project specifications. Tool Selection: Determine appropriate cutting tools, speeds, and feeds for each job. Quality Control: Measure and inspect finished parts to ensure they meet strict quality standards and specifications. Maintenance: Perform routine maintenance and upkeep on machinery and equipment to ensure proper function. Collaboration: Work with engineers and other team members to resolve production issues and improve manufacturing processes. Safety: Ensure adherence to all safety standards and company procedures while working with machinery. Duties Reading and interpreting blueprints, schematics, and engineering drawings. Setting up and operating machine tools to cut, shape, and finish materials to exact specifications. Using precision measuring instruments, such as calipers and micrometers, to ensure parts meet tight tolerances. Monitoring the production process and making real-time adjustments to machine settings. Performing routine maintenance on equipment to ensure it remains in good working order. Inspecting finished parts for quality assurance and documenting or discarding any defects. Adhering to strict safety protocols and workplace standards. Minimum QUALIFICATIONS Education/Experience High school diploma or GED is the minimum education. Completion of a vocational program, technical school certificate, or apprenticeship is highly valued. Strong mechanical aptitude and mathematical skills. Excellent attention to detail, accuracy, and coordination. Ability to read and understand technical blueprints. Physical stamina for repetitive tasks and standing for long periods. Specific Skills Strong work ethic. Demonstrates accuracy, thoroughness and looks for ways to improve efficiency. Dependable. Welding and fitting experience a plus Exceptional safety and quality awareness. Mechanical aptitude. Adaptable to changing schedules. Exceptional attention to detail. Teamwork. Ability to follow directions and procedures. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, use hands, and reach with hands and arms. The employee is frequently required to stoop, kneel, crouch or crawl and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, ability to adjust focus, and ability to see color.

Job Posting: Manual Machinist Location: 2110 Panoramic Cr, Dallas, TX 75212 Employment Type: Full-Time Salary: Competitive, based on experience About Us Kenney Industries is a leading Machine Shop specializing in Machining, Welding, Sheet Metal Fabrication and assembly. We are dedicated to delivering high-quality components for the aerospace, automotive, oil field, mining industries and more. We are seeking a skilled Manual Machinist to join our dynamic team. Job Description We are looking for an experienced Manual Machinist who is proficient in operating mills and lathes to produce precision parts. The ideal candidate will have a strong understanding of machining techniques, a keen eye for detail, and a commitment to quality. Key Responsibilities Set up, operate, and maintain manual mills and lathes to produce parts according to specifications. Read and interpret technical drawings, blueprints, and CAD designs. Select appropriate tools, materials, and machining techniques to achieve desired outcomes. Perform precise measurements using tools such as micrometers, calipers, and gauges. Conduct routine maintenance on machines and troubleshooting issues as needed. Ensure all work meets strict quality standards and tolerances. Collaborate with team members to optimize production processes. Maintain a clean and safe work environment, adhering to all safety protocols. Qualifications Proven experience as a Manual Machinist with expertise in operating mills and lathes. Strong knowledge of machining processes, tooling, and materials. Ability to read and interpret technical drawings and blueprints. Proficiency in using precision measuring tools (e.g., micrometers, calipers, dial indicators). Familiarity with various metals and their properties. Excellent attention to detail and problem-solving skills. Ability to work independently and as part of a team. High school diploma or equivalent; technical training or apprenticeship in machining preferred. [Optional: Any specific certifications, e.g., NIMS certification, if desired]. Preferred Skills Experience with CNC machining is a plus but not required. Knowledge of geometric dimensioning and tolerancing (GD&T). Strong mechanical aptitude and ability to adapt to different machining challenges. Benefits Competitive salary and performance-based bonuses. Health, dental, and vision insurance. Paid time off and holidays. 401k matching Opportunities for professional development and training. Supportive and collaborative work environment.

Brief Description: The Sr. Machinist will oversee work on a manual lathe which ensures cutting a variety of mud motor parts. All machinists should ensure each part of all measurements are accurate and that all parts are usable after cutting. This role is also responsible for visual inspection of all parts upon completion and QA/QC of all parts before being taken out of lathe. The Sr. Machinist role will report directly to the Machine Shop Supervisor (Production Foreman). Detailed Description: * Oversee inspection of all parts produced or machined * Repair all equipment brought to the machine shop * Provide effective QA/QC procedures during production * Ability to work independently in troubleshooting and resolving problems concerning machining operations * Perform secondary machining operations on components parts as required * Perform detailed analysis of the component parts configuration/dimensions to determine efficiency in machining operations required for production * Assess worn parts to determine whether they need to be repaired or replaced * Work with engineering and fellow supervisory personnel to troubleshoot and resolve design equipment and work through operating difficulties * Perform preventive maintenance duties as scheduled by the maintenance department * Provide training of lower-level machinists, answering work questions, resolving operating difficulties and reviewing completed work assignments * Document inspections, test results, repair work done * Oversee cleanliness and organization of the shop * Ensure that all equipment is clean and in good working order * Safely operate forklift to move equipment around the yard * Load machine with workpieces or raw materials * Strong familiarity with CAD drawings and geometric dimensioning testing * Performs other related duties as assigned Job Requirements: * Solid experience using various measuring equipment * Ability to operate an overhead crane * Clear vision to judge near and far distances to maintain awareness of reporting ongoing work activities to coworkers and third party * Maintain spatial orientation and awareness to safely move around work environment with many moving objects * Knowledge and experience with tools and materials * Broad knowledge of machining techniques to perform advanced setup operations * Proficient in the use of cutting tools & measuring equipment * Ability to read and understand blueprints drawings * Ability to work independently to troubleshoot and resolve problems concerning machining operations and tools * Ability to lead by example and be a good mentor to junior employees * Demonstrate clear written and verbal communication skills, including ability to promptly give and follow directions when working with others * Ability to handle multiple projects and supervisors at once * Must have good interpersonal and communication skills including ability to interact productively with coworkers and third parties * Ability to use a variety of hand and power tools to perform a range of mechanically oriented functions including independent use of heavy-duty handheld and long-handled tools * Ability to safely navigate the shop work sites with occasional walking, climbing, standing, stepping, etc. during normal operating conditions (day/night, outdoor hot/cold weather) * Lift and carry 50 pounds independently while potentially walking on uneven surfaces * Bend, stoop, kneel, twist, and crawl occasionally during visits to field and operational work areas * Listen for unusual noises that signify equipment and machinery problems * Stay alert and focused up including occasional extended work periods * Must be willing and able to be on call after hours and work on weekends * Wear Personal Protective Equipment (PPE) at all designated times * Good computer skills and proficiency in Microsoft Office Minimum Qualifications: * High school diploma or GED equivalent * 5+ years of experience running a manual lathe * Must live within a 1 hour driving distance of the shop * Availability to work on call rotation as well as overtime * Experience machining API connections and/or tapered connections. Preferred Qualifications: * Experience training junior machinists Additional Details: The Sr. Machinist must work with an emphasis on safety for themselves and others including coworkers and third parties. The typical work environment will be in the shop or field which will require exposure to outdoor weather conditions, loud noise, working near moving mechanical parts, electrical energy, construction equipment, vibration, fumes, chemicals and airborne particles.