Magna International jobs in Louisville, KY

The Opportunity: Avantor is seeking a Maintenance and Reliability Supervisor to oversee facility maintenance activities. The Maintenance Supervisor's work involves complete maintenance control over designated areas and they will report to the Reliability Maintenance Engineering Manager. This is a full-time position based out of our Carpinteria, CA office with occasional travel to support other sites as needed. What we're looking for: Education: HS diploma or equivalent degree. A degree in mechanical, instrument/electrical, or another relevant discipline (preferred). Experience: Minimum of 5 years' experience in facility maintenance. Certifications: Certification in Reliability (CRL, CMRP, etc.) desired. Additional Qualifications: Must understand the RCM process, Failure Mode Identification, Defect Analysis, Cause and Effect Analysis, Loss Elimination, use sFMEA, RCFA Decision Logic, and FRACAS. Must understand ISO 55000 Asset Management. Expertise in CMMS best practices. Full understanding of strategic maintenance planning and scheduling activities Management and leadership skills. Budget planning skills. Good communication and reporting skills. Ability to communicate/teach/coach reliability best practices, condition monitoring, and precision methods. How you will thrive and create an impact: Supervise and ensure the safety of Maintenance employees. Oversee all maintenance activities in their area of the facility. Perform routine and turnaround maintenance and plant modifications. Evaluate and analyze products, components, materials, and equipment for the purpose of understanding and predicting failures. Review product designs, material specifications, and manufacturing capability to predict reliability and dependability. Create prototypes and conduct product tests to gather reliability data. Interpret test results and recommend solutions using appropriate statistical distributions and reliability models. Recommend product design changes or alterations in manufacturing processes and controls to ensure achievement of required reliability levels. Monitor production equipment diagnostics and review maintenance record in order to predict and prevent equipment down times. Document findings, including results of root cause analysis, and facilitate the implementation of necessary changes to ensure product and/or equipment reliability levels are maintained. May determine maintenance requirements and schedules for products and equipment. Ensure maintenance resources provide an effective, efficient, and cost-effective execution of maintenance schedules across the work area. Manage the area maintenance budget. Account for the maintenance functions in their area and take necessary action to ensure that key performance targets are met. Ensure that workforce is allocated to areas of responsibility in the most effective manner. Ensure supervisory support is provided to carry out Weekly, Daily, and Shutdown Schedules. Monitor key performance indicators (KPIs) and take appropriate corrective action. Approve purchase requisitions for direct purchase of materials promptly. Monitor execution of best practices to ensure compliance and take appropriate corrective action as necessary (with Operations Management). Follow up on Root Cause Analysis (RCA) recommendations to ensure corrective actions are taken promptly (with Operations Management). Define priorities for the area (with Operations Management). Define and update the 12-Month and 8-Week Event Schedules (with Operations Management). Identify work (early) to be done during scheduled shutdown events. Identify appropriate goals and objectives for each shutdown. Other duties as assigned. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer. Why Avantor? Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science. The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor. We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today! Pay Transparency: The expected pre-tax pay for this position is $85,000.00 - $141,600.00 Actual pay may differ depending on relevant factors such as prior experience and geographic location. EEO Statement: We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at ****************************** and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. For more information about equal employment opportunity protections, please view the Know Your Rights poster. 3rd Party Non-Solicitation Policy: By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Dayton, VA Job Type: Full Time Shift(s) Available: 2nd Compensation: $20.65/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Marathon Health Clinic (Employer sponsored health center) Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities HACCP Checks Work closely with USDA Assist with department set ups Ensure all safety practices are being followed Responsible for reconditioning station Complete HACCP paperwork Work on production line as needed Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Ability to read/write/speak English Preferred Qualifications Previous Cargill experience Previous poultry experience Production experience Work history in the last 12 months Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement Equal Opportunity Employer, including Disability/Vet

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: Min: 63,800 - Mid - 88,800 Bonus Plan:Profit SharingProfit Sharing % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Schuyler, NE Job Type: Full Time Shift(s) Available: 2nd Compensation: $31.50/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Assist in design of electrical projects and install electrical equipment Coordinate efforts with other workers involved in installing and maintaining equipment or components Consult with operators, supervisors, and engineers to plan layout of equipment and to resolve problems in system operation and maintenance Determine feasibility of using standardized equipment and develop specifications for equipment required to perform additional functions Work with voltage levels up to 480, 4160. Wire Variable Frequency Drive's Study blueprints, schematics, manuals, and other specifications to determine installation procedures Perform instrumentation calculation, set up of parameters and limits Modify industrial electronic devices, circuits, and equipment in order to meet available specifications Set up and test industrial equipment to ensure that it functions properly Perform scheduled preventive maintenance tasks, such as checking, cleaning, and repairing equipment, to detect and prevent problems before they occur Inspect components of industrial equipment for accurate assembly and installation and for defects such as loose connections and frayed wires Advise management on whether continued operation of equipment could be hazardous Maintain equipment logs that record performance problems, repairs, calibrations, and tests Examine work orders and converse with equipment operators to detect equipment problems and to ascertain whether mechanical or human errors contributed to the problems Operate equipment to demonstrate proper use and to analyze malfunctions Repair, install and adjust equipment, machines, and defective components, replacing worn parts such as gaskets and seals in watertight electrical equipment Install coaxial or fiber optic cable for computers and other telecommunications equipment Maintain inventory of spare parts. Send defective units to the manufacturer or to a specialized repair shop for repair When breakdowns occur, make necessary repairs as quickly as possible in order to minimize inconvenience Test faulty equipment to diagnose malfunctions, using test equipment and software, and applying knowledge of the functional operation of electronic units and systems Work extended shifts to support the facility which may require coming in early, before normal shift and staying over later than normal shift Short notice may be given when coming in early or staying over late. May be called in to make repairs on nights, weekends or holidays Be flexible and adapt to changing priorities Must follow the National Electric Code; comply with state and Cargill standards Assist plant with management of outside contracted electrical projects for quality to comply with Cargill specifications Participates in ongoing skill level improvement training and apply what is learned Performs all requested tasks professionally and in a reasonable time frame Is flexible and able to adapt to changing priorities Work indoors and outdoors in a plant environment Enter confined spaces under proper permit conditions and supervision Troubleshoot problems as required Maintain a safe and sanitary atmosphere Inspect buildings, grounds, and equipment utilized by facility; determine immediate and long range needs for maintenance and repair work Enter notifications utilizing maintenance computer program Understand and adhere to state and federal Occupational Safety and Health rules and regulations as related to plant safety Follow all Cargill safety rules and regulations, including use of proper PPE Complete all housekeeping assignments, work to improve the condition of the department, and work as a team member with a positive attitude Attend various mandatory safety and department meetings Communicate in a courteous and positive manner to accomplish duties effectively, working as a team with all involved Assist other plant personnel as needed and will perform any other duty as requested by the supervisor Required Qualifications Must be eligible to work in the united states without visa sponsorship Must be 18 years or older Must be able to perform physical job duties including bending/stooping, climbing ladders, and work in confined spaces Ability to lift a minimum of 50 pounds Must be able to work under special work conditions, such as extreme heat or cold Ability to work in elevated areas Must be able to operate machinery Must be able to read/write English High School diploma or Equivalent Basic computer skills including being able to enter and retrieve data Ability to work overtime Ability to work holidays, nights, weekends or different shifts Must be able to perform electrical maintenance trade Experience working with blueprints, schematics, manuals, and other specifications and the mathematical knowledge required for such work Must be able to operate mobile equipment Must have a high degree of mechanical aptitude Demonstrated ability to perform basic mathematical functions including addition, subtraction, multiplication, division and percentages Must be willing and able to work in inclement conditions and extreme temperatures Must be able to work in an outdoor, and indoor plant environment Must have very good time management skills with ability to prioritize tasks and work independently Install conduit and pull wire Have a strong commitment to safety Must have adequate transportation Craftspeople in this position will use multiple tools such as multi-meter; 500-to-1000-volt meg-ohm tester; voltmeter; ohmmeter; mobile equipment; safety equipment and PPE Preferred Qualifications Experience with wiring and programing Allen Bradley Programmable Logic Controllers Experience using electrical test equipment to perform analysis and troubleshooting Knowledge of the National Electric Code Mechanical aptitude to work from all types of blueprints, maintenance manuals, and drawings Apprentice, Journeyman or above license with the state of Nebraska or equivalent A 2-year degree in electromechanical, electrical system, or equivalent Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27882 Purpose To provide technical and process support for PC Board manufacturing operations. Job Duties and Responsibilities Provides technical and process support related to PC Board production, prototype, and process development. Uses schematics, diagrams, written and verbal descriptions or defined plans to perform testing and troubleshooting on electronic or mechanical components, equipment or systems. Gathers, maintains, formats, compiles and manipulates technical data using established formulae and procedures and performs detailed mathematical calculations. Address concerns reported through employee suggestion and near-miss systems. Encouraged to initiate changes for continuous product and process improvement. Basic Requirements Minimum of a high school education or GED is required. Minimum 5 years of work experience or Associate Degree in related field. Rotational availability between 1st and 2nd shift is preferred. Has full proficiency in a range of technical processes or procedures (or deep skills in a single area) through job-related training and considerable work experience Completes a variety of atypical assignments Works within defined technical processes and procedures or methodologies and may help determine the appropriate approach for new assignments Works with a limited degree of supervision, with oversight focused only on complex new assignments Acts as an informal resource for colleagues with less experience Effective written and oral communication skills. Strong desire to take ownership and drive results. Ability to analyze data to drive decision making. Good organizational skills and computer skills. Proficient in the use of MS Office including but not limited to Word, Excel, PowerPoint. On an as needed basis, train, assist and observe other department personnel (as qualified) on the department equipment and/or process for improvements such as but not limited to safety, quality, ISO 14001 & 45001 and manufacturing proficiency/efficiency. Environmental Health & Safety (EHS) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS and JHA procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS procedures are contained in reference books such as SSW Specifications, Plant Rules and Regulations. Safety Data Sheets are stored electronically and available 24/7. In an emergency SDS may be accessed at Security. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS and JHA procedures. Personal Protective Equipment: See Department PPE Chart Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Bettendorf Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($21/hr - $31.25/hr) Target Bonus: 5.0% Req ID: 27686 Summary Lincoln Electric Automation is seeking a Quality Technician for our Bettendorf, IA location to perform in-process and final inspections, maintain quality standards, and support continuous improvement within a fast-paced automation environment. This role ensures that assemblies, weldments, and tooling meet engineering and customer requirements. In addition to competitive pay, Lincoln Electric offers an annual bonus program, student loan repayment program PLUS tuition reimbursement, medical/dental/vision, paid time off and many more outstanding benefits! Responsibilities Perform in-process and final inspections on assemblies, weldments, and fabricated components. Maintain and calibrate inspection and measuring equipment. Identify and document nonconformities; assist in corrective actions. Work with engineering and fabrication teams to resolve quality issues. Provide feedback to improve workflow, documentation, and process efficiency. Complete inspection reports and quality documentation. Support assembly, fit-up, hydraulic line plumbing, and customer run-off. Assist with field start-up and customer training as needed (overnight travel required). Maintain a clean, safe, and organized work area. Required Education & Experience High school diploma or GED required; technical training preferred. Proficient in reading blueprints and GD&T. Strong attention to detail and organizational skills. Proficient with Microsoft Office (Excel, Word, PowerPoint). Experience with CMM systems (Leica, Faro Arm) and PolyWorks preferred. Knowledge of manufacturing equipment, inspection tools, and procedures. Ability to operate forklifts and overhead cranes safely. Effective communication and teamwork skills. Physical Demands and Work Environment The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is typically required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; see, talk and hear. Be able to climb ladders; lift hand tools up to 40 lbs. consistently, and parts up to 50 lbs. consistently. Repetition with activity. Specific vision abilities required by the job include close vision, distance vision, depth perception and the ability to adjust focus. Work environment: The noise level in the work environment is usually moderate. Shift: Full time, Monday-Friday (7am-3:30pm), overtime as needed. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 26124 Job Responsibilities PURPOSE: Design, build, rework, maintain, repair and troubleshoot all forms of tooling (including dies, tools, gauges, fixtures, and molds). JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES): Determine the best method to manage and complete a project by a designated due date. Interact with QA, production, R&D, manufacturing, and maintenance to provide solutions. Maintain accurate documentation of tool modifications, repair, preventative maintenance and individual work performed throughout the shift. List, monitor, maintain, and occasionally purchase components for new tool builds or repairs. Capable of creating a repeatable setup and working to tolerances of +/-.0002" routinely. Coordinate work assigned through various auxiliary work centers and equipment as required. Occasionally assist operators and maintenance with machine or processing issues. Validate the quality of work following standard machining practices and using available measurement equipment and inspection resources. Effectively communicate with other personnel and educate apprentices in best practices. Adhere to all written specifications and ensure compliance with all standards. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Job Requirements BASIC REQUIREMENTS: Completed an approved Mold Maker or Tool and Die Maker state apprenticeship program or demonstrated the ability to perform the aforementioned tasks. Must pass the skilled trades assessment test for this position. Proficiently operate all common machining equipment, mills, lathes, grinders, etc. Work as a team lead as well as a team member depending on the departmental workload. Awareness of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Time management skills and the ability to work to deadlines in a fast-paced environment. Proven analytical and troubleshooting abilities as well as a high degree of mechanical aptitude. Work from design prints, sketches, sample parts and oral instructions. Moderate hand dexterity is required for this position and the ability to occasionally lift 75 lbs. Personally possess basic inspection and machining tools to effectively perform job. Available to work second shift, overtime and weekends as required. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lee Company offers complete facility solutions services of HVAC, plumbing, electrical, and preventative maintenance for commercial facilities throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and excellence since 1944. Summary of Job: The HVAC Maintenance Team Lead 3 will perform Maintenance inspections and ensure all maintenances are completed per the contract/filter belt list. Education and Experience: Universal EPA Certification Minimum of 8+ years of Commercial HVAC Service experience preferred High school diploma or equivalent GED certificate preferred Skills and Abilities: Excellent written communications skills Able to work well with other technicians and tradesman Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. At Lee Company, you will be among the most knowledgeable and experienced trade experts in the country. We offer competitive pay, full benefits, paid training, and opportunities for growth. If you have a desire to serve and a passion for excellence, apply today! Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

ESSENTIAL FUNCTIONS Support the development of structural design for low- to medium-complexity modular steel buildings. Prepare structural 3D models, perform static and dynamic calculations, and generate technical documentation such as workshop drawings, lifting and anchoring layouts, and specifications. Apply international, national, and internal standards, ensuring that all designs are safe, compliant, and cost-effective. Integrate good engineering practices into every stage of the design process. Actively participate in project kick-off and coordination meetings, and engage with cross-functional teams including architectural, electrical, mechanical, manufacturing, and site engineers to ensure a cohesive project execution. Support the review and technical approval of workshop documentation and supplier RFQs. Specify materials, services, and necessary certifications for project execution. Provide technical support during fabrication and assembly. Collaborate with site managers, manufacturing, quality control, and commissioning engineers to resolve structural issues and ensure safe and efficient implementation. QUALIFICATIONS Bachelor's Degree in Mechanical or Structural Engineering or acceptable experience Professional engineering (PE) License - optional Minimum 5 years of mechanical/structural engineering experience Proficiency in Tekla, Revit, AutoCAD or Creo, SCIA Engineer, anchoring design tools, and MS Office Attention to detail, analytical thinking, creativity, problem-solving, organization, flexibility, and strong team collaboration Experience reading and interpreting construction drawings and equipment specifications, customer specifications Knowledge and understanding of local and national building codes Must have the ability to research new designs, technologies and construction methods of data center equipment and facilities TRAVEL REQUIREMENTS 15 - 25% Domestic and International travel required The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Promote Transparent & Open Communication At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $8.0 billion in sales, a strong customer base and global reach in nearly 130 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-CM1

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 27359 Primary Function Analyze, review and repair failed PC Boards and AOI. Responsibilities Understand and perform associated quality procedures used to process items in work center. Repair and rework assembly line and in-process PC board failures. Repair and rework in-process AOI or X-Ray failures. Identify and enter PC Board failure information and accountability into MES. Comply with Plant Rules and Regulations, Factory, and Operation specifications. Follow all applicable ESD procedures. Obtain and return SMT components from / to fixed location. Operate AOI equipment as trained. Sort PCB assemblies as acceptable or need repair. Able to utilize X-Ray equipment to determine defects/solder abnormalities. Notify placement equipment operators of upstream issues. Notify QA personnel and MAS of processing / operator errors and issues discovered. Notify scheduler, MAS, and QA personnel when high percent of failures are occurring. Interact with Supervision, Maintenance, Manufacturing Engineering, R&D and Plant Engineering to resolve equipment, procedural, and/or finished assembly problems. Cross training of employees to provide flexibility will be required. Skills and Aptitude Have excellent people, organizational and communications skills. Must have an uncompromising attitude towards quality. Excellent attendance, safety and work record. Must be self-motivated. Working knowledge of production and manufacturing floor control systems. Knowledge of Excel spreadsheets, MS Access database and Word application. Ability to lift 60 pounds on an occasional basis. Must be knowledgeable of quality procedures used in the manufacturing department and how they relate to the needs of the customer. Safety, workmanship, product quality and productivity in the performance of the job. May require shift rotation. Must be knowledgeable on soldering as dictated by QC-306. Training The Supervisor/Manager shall determine when an individual has completed the training and is qualified to assume these responsibilities. The Supervisor/Manager shall ensure that the employee receives “on the job training”, and the following training at the appropriate times. See Lincoln specification RE150 for training requirements. Environmental, Health, and Safety Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS, and JHA procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS procedures are contained in reference books, such as SSW Specifications, Plant Rules and Regulations, and Material Safety Data Sheets, which are located in the Foreman's area. Immediately notify the Production Team Lead if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS, and JHA procedures. Make sure all containers of chemicals used for this job are compatible with the material in the container and are properly labeled with a GHS label and stored per company policy when not in use. Make sure all equipment spills, leaks and chemicals are properly contained and cleaned up and trouble call entered for repair. Best efforts shall be used to reduce, reuse or recycle waste while performing the duties and/or tasks associated with this job and segregate waste per company policy. Participants in EHS initiatives as required by department and employee objectives and goals. Personal Protective Equipment Safety glasses with side shields Safety toe, ESD work shoes Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Req ID: 26988 Overview We are seeking a talented and driven Embedded Software Engineer with expertise in Linux systems to join our innovative team. This role blends embedded application development, platform engineering, board support package (BSP) maintenance, and hardware bring-up. You'll collaborate with cross-functional teams to create secure, high-performance software for Linux-based embedded systems. Key Responsibilities Embedded Application Development Design, develop, and maintain applications for embedded Linux environments. Write clean, efficient code in C, C++, and Python. Implement and optimize device drivers, APIs, and middleware. Conduct system-level debugging, performance optimization, and troubleshooting. Create and execute test plans to ensure functionality, reliability, and quality. Partner with QA teams for seamless deliverables. Platform Engineering & BSP Maintenance Maintain and update BSPs across diverse hardware platforms. Work with hardware teams to develop, validate, and configure drivers, kernels, and bootloaders. Lead hardware bring-up for new designs, ensuring smooth software-hardware integration. Security and Compliance Embed security best practices throughout the software stack. Perform vulnerability assessments and risk analyses. Collaborate with security experts to resolve incidents and uphold compliance standards. Collaboration & Mentorship Partner with hardware, firmware, and QA teams to define requirements and solve challenges. Mentor junior engineers and contribute to team knowledge-sharing. Qualifications Bachelor's degree in Electrical, Computer, or Software Engineering (or related field); advanced degrees preferred. Level III: 5+ years of relevant experience. Level IV: 8+ years of relevant experience. Hands-on experience in embedded Linux development, including kernels, drivers, and applications. Strong knowledge of Linux kernel architecture, system calls, and bootloaders. Proficiency with version control systems (e.g., Git) and collaborative workflows. Familiarity with networking protocols, communication interfaces, and embedded hardware. Excellent problem-solving, debugging, and communication skills. Preferred Qualifications Experience with real-time operating systems (RTOS) and low-level programming. Expertise in Yocto Project, OpenEmbedded, and cross-compilation tools. Knowledge of Agile/Scrum methodologies. Background in safety-critical or security-focused systems. Contributions to open-source embedded or Linux projects. Understanding of digital electronics and hardware design. At Lincoln Electric, we invest in your growth through ongoing training, competitive benefits, and a collaborative culture that rewards initiative. Ready to power up your career? Apply now and help us weld the future. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Employment Status: Salary Full-Time Function: Engineering Req ID: 27246 Summary Lincoln Electric is seeking a highly skilled Project Manager to support our Red Viking subsidiary based in Plymouth, MI. This role is responsible for leading complex, high-visibility projects that require significant resources, cross-functional collaboration, and seamless integration across teams. The Project Manager will drive initiatives from concept through final implementation, ensuring quality, budget, and schedule adherence while maintaining strong stakeholder alignment. At Lincoln Electric, we offer career growth potential along with a competitive compensation package, including bonus incentives, student loan repayment, tuition reimbursement, paid time off, paid holidays, a comprehensive benefits package (medical, dental, and vision), retirement plans, and much more. Key Responsibilities Lead projects through the full lifecycle: initiation, planning, execution, monitoring, control, and closure. Define project scope, objectives, deliverables, and success criteria while aligning team members to roles and responsibilities. Develop detailed project schedules, allocate resources, and manage risks to ensure timely and cost-effective completion. Coordinate cross-functional efforts with engineering, manufacturing, procurement, testing, quality, distributors, vendors, and end users. Ensure strict compliance with quality standards; review and approve final project deliverables. Provide regular updates to executive leadership and business unit leaders on project progress, risks, and outcomes. Manage and maintain financial tracking tools including Gross Margin, Operating Profit, Backlog, SG&A, and other key financials. Utilize advanced Excel skills to create and troubleshoot formulas, build reports, and support executive-level reporting. Leverage ERP systems for project tracking, reporting, and ensuring data integrity across business functions. Lead and mentor a team of project engineers, staff engineers, and manufacturing professionals to achieve technical and operational goals. Prepare clear documentation, presentations, and reports for both internal and external stakeholders Required Experience & Education Education: Bachelor's degree in Engineering, Technical Discipline, or Business Administration (with strong technical design and execution background). Experience: 7-10+ years of project management experience in a manufacturing environment. Proven background in advanced capital equipment design, build, and installation (scheduling, procurement, manufacturing, testing, and quality). PMP certification strongly preferred. Project Leadership: Demonstrated success managing scope, budgets, schedules, personnel, and materials within complex organizations. Technical Knowledge: ERP systems experience for project management and reporting. Proficiency with Excel (advanced formulas, financial tracking, reporting). Familiarity with ISO 9001, ISO 14001, ISO 17025, or equivalent standards. Soft Skills: Strong leadership, influence, and negotiation abilities. Excellent written, verbal, and presentation communication skills. High attention to detail and documentation accuracy. Other Requirements: Supervisory experience managing technical professionals. This person will work very closely with a team of project engineers, staff engineers, and manufacturing professionals on a daily basis. Willingness to travel up to 20%. U.S. Citizen or Permanent Resident (ITAR compliance required). Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Responsibilities and Measurement Criteria with Time investment Needed on Each: (This will describe the overall core responsibilities of the role, decision making responsibilities etc.) Design and development of UPS subsystems/components in compliance with specifications, EMC/EMI requirements, and applicable standards. PCB design. Detailed analysis of UPS electronic subsystems/components, focusing on performance evaluation, design optimization, component selection and sizing, and control strategy. Collaboration in an interdisciplinary engineering environment (with embedded, test, and mechanical engineers) to define requirements, discuss trade-offs, participate in design verification, and ensure successful integration of single-phase UPS designs. Continuous improvement of existing designs, evaluation of application issues, and resolution of those issues in the design of new products. Evaluation of new technologies to enhance and implement them in new R&D systems and processes. Adherence to agreed-upon project timelines. Preparation of relevant technical reports. Qualifications: Required/ Minimum Qualifications: Master's degree or higher in Electrical Engineering with a focus on power electronics. Proficiency in medium-to-low power circuit topologies, principles of power electronic converters, and semiconductor devices. Additional / Preferred Qualifications: - Hands-on experience with PCB design and layout. Knowledge of electronic design practices for EMC compliance. Strong analytical skills combined with excellent problem-solving abilities and interpersonal communication. Experience in UPS and power module development is highly desirable. Physical & Environmental Requirements: - (To be used majorly for manufacturing jobs.) None Time Travel Needed: 10% OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-CM1

Lee Company offers complete facility solutions services of HVAC, plumbing, electrical, and preventative maintenance for commercial facilities throughout Tennessee, Alabama, and Kentucky. Our incredible team has built their reputation on trust, honesty, employee safety and excellence since 1944. Summary of Job: Responsible for performing maintenance and service for our commercial HVAC customers, utilizing our technology, technical capability, and exceptional customer service to provide customer-first solutions. Education and Experience: Universal EPA Certification Minimum of 8+ years of Commercial HVAC Service experience preferred High school diploma or equivalent GED certificate preferred Skills and Abilities: Excellent written communications skills Able to work well with other technicians and tradesman Company Perks & Benefits: Our mission at Lee Company is to create a workplace where our employees can thrive, and we back that up with action. Wellness isn't just about your physical health; it's about your finances, career, community, and relationships too. We don't just talk the talk; we walk the walk. Check out the benefits that help our team live well and work well every day! Physical: Comprehensive health, dental, and vision insurance, plus on-site and mobile health clinic services. Financial: Earned Wage Access (EWA) - access a portion of your earned pay before payday, 401(k) company match, HSA contributions, and company-paid life and long-term disability insurance. Community: Company-supported volunteer opportunities to make a real impact. Career: Free trade training through Lee Company University (LCU), paid time off (PTO), and career growth opportunities. Relational: Paid time off (PTO), holidays, and Chaplain services for support when you need it. At Lee Company, you will be among the most knowledgeable and experienced trade experts in the country. We offer competitive pay, full benefits, paid training, and opportunities for growth. If you have a desire to serve and a passion for excellence, apply today! Lee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave. Lee Company is an E-Verify employer. Candidates must be legally authorized to work in the United States. At the time of hire, employees will be required to provide proof of employment eligibility.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Range: ($24.00/hr - $38.00/hr) Target Bonus: 5.0% Req ID: 27586 Summary Fori Automation, a Lincoln Electric company, is a global leader in designing and integrating automated assembly, welding, material handling, and testing systems. We deliver world-class automation solutions to leading manufacturers worldwide. We're seeking an experienced Mechanical Designer to join our Weld Systems team in Shelby Township, MI. In this role, you'll design and develop mechanical systems for automated welding equipment, ensuring precision, performance, and manufacturability. At Lincoln Electric, we invest in our people. In addition to competitive pay, we offer an annual bonus plan, tuition reimbursement, comprehensive medical/dental/vision benefits, 401(k) with company match, paid time off, and many other outstanding benefits. What You'll Do Develop mechanical concepts and detailed designs using 2D and 3D CAD tools. Focus design on tooling and fixture creation. Create accurate Bills of Materials (B.O.M.) and design documentation. Apply engineering calculations to verify design integrity (e.g., beam stress). Utilize standard designs, specifications, and part/vehicle data to build robust systems. Organize and maintain CAD files in accordance with company and project standards. Select appropriate materials and components for optimal performance and cost. Ensure all designs meet NAAMS standards and relevant industry standards for construction, safety, and ergonomics. Collaborate with cross-functional teams to deliver high-quality automation systems on time. Required Education & Experience Bachelor's degree in Mechanical Engineering preferred (or equivalent experience). 1+ year of design/layout experience (or 2+ years in a similar role without degree). Experience designing MIG and/or resistance weld machines preferred. Proficiency in 3D CAD (Inventor, SolidWorks, or similar) and 2D AutoCAD. Strong grasp of manufacturing principles, materials, and design best practices. Ability to perform basic engineering calculations and apply advanced algebra and design techniques. Team-oriented mindset with the ability to thrive in an ISO9001:2000 environment Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Coldwater Req ID: 28002 Job Responsibilities Position Summary: We are seeking applicants for a Trainee position which is an entry level Skilled Trades employee to perform general machine shop cleanup duties. This position is an opportunity to gain experience in a machine shop setting for an individual who would potentially grow into a member of LEA Coldwater's Apprenticeship Program. Role qualifications: • Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. • Be aware of the relevance and importance of their activities and how they contribute to the achievement of quality objectives. Position responsibilities: • Ensure cleanliness and organization of the manufacturing shop • Assist with set up and tear down of any company wide meeting • Perform other duties as assigned • Work well with helpers, Engineers, Management, and support functions Job Requirements Essential skills and experience: • Pending or earned High School Diploma • Vocational training in Machine Trades or equivalent preferred • Demonstrated aptitude for mechanical trades and applied mathematics • Demonstrated eagerness to work and learn metalworking • Basic mechanical knowledge of machines and tools • Commitment to company values. • Educational training and experience requirements may be modified at the Managements Team's discretion. Behavioral Traits: • Highly self-motivated and driven • Dependable • Organized • Active listener • Forward thinking attitude and the continual need to refine and polish work, by seeking to exceed customer and Company's expectations Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Req ID: 26527 Summary Fori Automation, LLC, a Lincoln Electric Company, is a global supplier of welding, assembly, material handling, and testing equipment for automotive and non-automotive customers worldwide. Fori Automation focuses on delivering cost-effective, highly engineered products and systems designed and manufactured globally with localized sales, project management, and service. We are seeking an experienced Controls Software Engineer for our Shelby Township, MI site with a background in industrial software development. The Controls Software Engineer will initially support active projects and then transition to completing projects directly. They will take the lead on developing software on new projects and debug software on new machines. This role requires travel to customer sites for equipment installation and customer interaction. What You Will Do Design PLC software and HMIs for industrial automation equipment Debug and troubleshoot PLC software and HMIs Collaborate with cross-functional teams to maintain project timelines and critical path milestones. Maintain task lists and reports of open items. Maintain project design documentation and prepare customer deliverables. Ensure the controls engineering process is tracked and followed. Assist customers and local tradespeople in troubleshooting equipment issues. Conduct end-user training on equipment operation. Education & Experience Requirements Electrical Engineering or Computer Engineering degree preferred; Mechatronics degrees will also be considered. Minimum of two years of experience as a Controls Engineer or Controls Software Engineer with experience in designing Rockwell Logix 5000 or Siemens S7-1500 family processors. Knowledge or education in electrical circuits, schematic reading, design, and troubleshooting. Experience with electrical CAD systems, such as AutoCAD Electrical and/or ePLAN Experience with PLC programming in ladder and structured text. Experience programming HMIs Travel required: approximately 30% domestic and international. Weekend work may be required based on project schedules. Preferred Experience in computer programming languages, such as VB, C/C++, or C#. Experience with Rockwell and Siemens HMI preferred. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Coldwater Req ID: 27956 Position Summary Identify the manufacturing process, recommend the machinery concept, accurately develop the cost model, create quotations and provide other supporting information as needed to sell Lincoln Electric Automation-designed equipment. Role Qualifications Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. Play an active role reviewing and developing customer process requirements as it pertains to the application of our products. Play an active role in communicating issues that could impact customer satisfaction. Position Responsibilities Evaluate the feasibility of automation systems based on data supplied by Sales, Engineering, Management and Customers Develop manufacturing processes and concepts capable of producing systems or products Research and develop accurate cost estimates for Lincoln Electric Automation equipment. Write technical quotations and produce supporting documentation as needed. Assist as necessary with customer communication, presentations, and trade related events. Follow-up as necessary with sales, customers, and representatives. Responsible for following Department ISO procedures Essential Skills and Experience Minimum High School Diploma, Associate degree in technical discipline desired or equivalent years of experience. CAD (3D modeling a plus) Preferred 8-10 years of experience in manufacturing and design (mechanical/electrical) of industrial automated equipment. Metal forming (bending, forming, piercing, etc.) and metal joining (Laser, arc, resistance welding, etc.) experience preferred. Preferred 1-2 years of experience working with customers and suppliers. Proficient in Word, Excel and PowerPoint Effective writing and communication skills. Commitment to company values Educational, training, and experience requirements may be modified at the Managements Team's discretion Nonessential Skills and Experience Computer proficiency, including spreadsheet, word processing, and project management software. FMEA, Equipment Capability, Safety (OSHA Stds.) Environmental, Health & Safety (EH&S) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA & EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe and environmentally friendly manner and observe all company EHS procedures. Know that the company EHS procedures are located on the ISO drive. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures. Attend required EHS training Reporting to this position: No direct reports Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work environment: The noise level in the work environment is usually moderate. ISO-14001 Complies with ISO 14001, and other relevant standards. Support, implement and understand the intent of the EMS policy. Participates with ISO-14001 as required. AS 9100 w/ ISO 9001 Complies with AS9100D and ISO 9001:2015 quality management system, procedures, and work instructions General sign-off: The employee is expected to adhere to all company policies. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Job descriptions may display in multiple languages based on your language selection. What we offer: At Magna, you can expect an engaging and dynamic environment where you can help to develop industry-leading automotive technologies. We invest in our employees, providing them with the support and resources they need to succeed. As a member of our global team, you can expect exciting, varied responsibilities as well as a wide range of development prospects. Because we believe that your career path should be as unique as you are. Group Summary: Magna is an innovative leader in the development and manufacturing of high quality complete seating systems. Our solution includes seating structures, mechanisms and hardware, as well as foam and trim products for global automotive, heavy truck and bus industries. Our capabilities include market and consumer research; full concept development; design and engineering capabilities; testing, validation and world-class manufacturing. Our award-winning seating solutions are developed from consumer research, finding the ease of operation to be comfortable, convenient and connected. Job Responsibilities: The ideal candidate should possess an undergraduate degree in Engineering or equivalent experience, with strong analytical skills and proficiency in computer software applications such as word processing, spreadsheets, databases, and AutoCAD. Key responsibilities include: * Providing engineering support for designing and manufacturing fixtures, machines, and tools, ensuring ergonomic and safety standards. * Examines plans and specifications for new machinery and equipment to ascertain if all safety precautions have been included. * Assists in preparing Failure Mode Affects Analysis Reports. Facilitates compliance with all OSHA regulations relating to the plant. * Assisting in ergonomics programs and plant health and safety initiatives to prevent unsafe working conditions. * Conducting plant surveys to assess exposure to hazards like noise, dust, fumes, and radiation. * Ensuring compliance with Quality, Environmental, and Material Management systems, including ISO 14001 standards. * Promoting a safety-conscious attitude, reporting unsafe conditions or incidents, and adhering to all health, safety, and environmental policies per company and legal standards. The role emphasizes safety, regulatory compliance, and continuous improvement in manufacturing processes. Awareness, Unity, Empowerment: At Magna, we believe that a diverse workforce is critical to our success. That's why we are proud to be an equal opportunity employer. We hire on the basis of experience and qualifications, and in consideration of job requirements, regardless of, in particular, color, ancestry, religion, gender, origin, sexual orientation, age, citizenship, marital status, disability or gender identity. Magna takes the privacy of your personal information seriously. We discourage you from sending applications via email or traditional mail to comply with GDPR requirements and your local Data Privacy Law. Worker Type: Regular / Permanent Group: Magna Seating