Maintainer operator jobs near me - 23 jobs

In this role, you will make an impact in the following ways: Product Software: This applied technology position will be involved in creating and managing the software that controls the operation of many Cummins' products in a variety of end use applications. Software Tools: This applied technology position will be involved in the identification and understanding of stakeholder requirements, specifications and the design, implementation, testing and/or release of software that interact with Cummins' products in a variety of customer applications. Hardware: This applied technology position creates and integrates electrical and electronic hardware that is essential to Cummins products. People in these positions will typically develop and validate electronic sensors, actuators, control units, harnesses, wiring practices, or control systems and associated analog and digital signals to ensure the consistent operation of Cummins' products in a variety of customer applications. Product Performance & Controls Integration: This product focused position tailors' electronic and electrical systems for Cummins products. People in these positions will translate product requirements into hardware and software technical requirements that control the operation of Cummins' products in a variety of customer applications. Responsibilities To be successful in this role you will need the following: Design and Application of Mechatronics Systems Machine Integration and Optimization Product Failure Mode Avoidance Product Problem Solving Product Verification and Validation Management System Requirements Engineering Decision quality Drives results Communicates effectively Degree Programs Considered: Bachelor's, Master's, PhD Major Programs Typically Considered: All Engineering Majors Qualifications 2026 Monthly Salary Range by Degree Level: Bachelor's - $3,900 - $5,000 Master's - $6,000 PhD - $7,300 Please note that the salary range provided is a good faith estimate of the applicable range. The final salary offer will be determined after considering relevant factors, including a candidate's qualifications and experience, where appropriate. Co-Op program criteria: Must be a full-time enrolled student pursuing an undergraduate or graduate degree at an accredited U.S. college/university Minimum 2.5 or above GPA preferred Must be able to complete a minimum of 4-months to 6-months or a maximum of a 12-months commitment Must be able to complete 40 hours per week Willingness to learn from others on the job Must be currently residing within the continental U.S. Compensation and Benefits Base salary rate commensurate with experience. Additional benefits vary between locations and include options such as our 401(k) Retirement Savings Plan, Cash Balance Pension Plan, Medical/Dental/Life Insurance, Health Savings Account, Domestic Partners Coverage, and a full complement of personal and professional benefits. Cummins and E-verify At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Cummins validates the right to work using E-Verify. Cummins will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. Ready to think beyond your desk? Apply for this opportunity to start your career with Cummins today. careers.cummins.com Not ready to apply but want to learn more? Join our Talent Community to get the inside track on great jobs and confidentially connect to our recruiting team: ******************************

Number of Positions: 2 Duration: 4 months Dates: May- August, 2026 EDUCATIONAL RECOMMENDATIONS Currently a candidate pursuing a bachelor's degree in Electronic Engineering, Applied Physics, Computer Science or related degree with an accredited university in the USA. Proficient in one or more of the following, Python, Matlab, VB .NET. Knowledge of communication systems and performance metrics. Knowledge of working with version control systems, preferably Git. Ability to work both independently and within a team setting. Strong communication skills. Able to summarize complex data and present to a cross functional audience. Curiosity and interest in communication systems. Help define and build test setups for optical performance testing of next generation products. Automate test sequences to enable running tests over conditions. Summarize and perform initial analysis on test data. Present data and key findings to a cross functional team.

Title: E-2 Test Weapon System Operator (Aircrew) KBR is proactively seeking an E-2C/D Test Weapon System Operator (Aircrew) to join our team. As part of the world's largest independent flight test organization supporting the US Government and commercial agencies, you will join a highly talented and experienced KBR aircrew services team that has provided over 40 continuous years of flight test support for NAVAIR Test Squadrons. As a long-term incumbent and leader in test aircrew support, the selected applicant will work within a test squadron environment composed of government, military, contractor, and industry personnel while supporting flight tests. Role and Responsibilities: This Weapon System Operator position supports Air Test and Evaluation Squadron Two Zero (VX-20) E-2C/D developmental test and evaluation at the Naval Air Warfare Center Aircraft Division (NAWCAD), Patuxent River, MD. Participates in E-2 developmental flight testing as a Test Weapon System Operator. Performs a variety of tasks that support flight testing including development of test plans and detailed test procedures, pre-mission planning, mission briefing, conducting functional check and engineering test flights, evaluation of simulator devices, data collection during ground and flight tests, post-flight liaison with maintenance and engineering representatives, mission debriefing, drafting post-flight reports/deficiencies and participation in technical meetings. Most work will be conducted on-site at NAS Patuxent River, MD; however, some domestic travel will be required in support of flight test activities. Must be able to operate in a dynamic and fast-paced team environment. Must be able to operate effectively at remote work sites without direct supervision. Must be proficient with Microsoft Office Suite and similar computer-based productivity applications. Basic Qualifications: Bachelor's degree and at least ten years of work experience. Past or current designation as an E-2 Combat Information Center Officer (CICO), Mission Commander (MC) or Air Intercept Controller (AIC) is required. Graduate of one of the following is a plus: U.S. Naval Test Pilot School (TPS), U.S. Air Force TPS, Empire TPS or EPNER TPS. A minimum of 1000 hours in Navy aircraft and 500 hours in E-2C/D is required. Must be able to pass the physical and training qualification requirements to provide contract aircrew support, including completion of US Navy aviation physiology and water survival qualifications, as well as annual FAA Class II flight physical. An active secret level security clearance. Contract requires US citizenship. Applicant selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Preferred Qualifications: Graduate of one of the following is a plus: U.S. Naval Test Pilot School (TPS), U.S. Air Force TPS, Empire TPS or EPNER TPS. E-2D experience and two (2) years RDT&E flight experience is desired but not required. Proactively seeking qualified candidates. This position is pending government funding. Compensation: $131,000-196,500. The salary range posted is based on the national average. The offered rate will be based on the selected candidate's location, knowledge, skills, abilities, and/or experience, contract affordability, and in consideration of internal parity. Additional Compensation: KBR may offer bonuses, commissions, or other forms of compensation to certain job titles or levels per internal policy or contractual designation. Additional compensation may be in the form of a sign-on bonus, relocation benefits, short-term incentives, long-term incentives, or discretionary payments for exceptional performance. KBR Benefits : KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development. Belong, Connect and Grow at KBR At KBR, we are passionate about our people and our Zero Harm culture. These inform all that we do and are at the heart of our commitment to, and ongoing journey toward being a People First company. That commitment is central to our team of team's philosophy and fosters an environment where everyone can Belong, Connect and Grow. We Deliver - Together. KBR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

APPLICATION INSTRUCTIONS: CURRENT PENN STATE EMPLOYEE (faculty, staff, technical service, or student), please login to Workday to complete the internal application process. Please do not apply here, apply internally through Workday. CURRENT PENN STATE STUDENT (not employed previously at the university) and seeking employment with Penn State, please login to Workday to complete the student application process. Please do not apply here, apply internally through Workday. If you are NOT a current employee or student, please click “Apply” and complete the application process for external applicants. Approval of remote and hybrid work is not guaranteed regardless of work location. For additional information on remote work at Penn State, see Notice to Out of State Applicants. JOB DESCRIPTION AND POSITION REQUIREMENTS: We are seeking Undergraduate and Graduate Student Co-ops to support research, development, and engineering activities of the Navigation Research and Development Division (NRDD) part of The Applied Research Laboratory (ARL) at The Pennsylvania State University, located in Warminster, PA , Penn State's Applied Research Laboratory (ARL) is a Department of Defense (DoD) designated University Affiliated Research Center (UARC), which serves as a center of research excellence in a multitude of areas. ARL conducts basic and applied research, exploratory development, and advanced development in support of the U.S. government organizations; contributes to the educational objectives and research goals of Penn State; and promotes the transfer of advanced technology to the U.S. government. NRDD is a satellite campus of ARL focused on developing the most advanced navigation technologies in the world, built around unique laboratories specially designed to test the most precise navigation sensors and systems. The mission of the NRDD is to conduct new navigation technology research and development, systems engineering and to provide expert knowledge for our Navy, Army, and other U.S. government sponsors. You will: You will support laboratory operations related to the development, testing, and evaluation of navigation systems You will be working with a cooperative team of scientists and engineers responsible for a mix of hands on work with electrical circuitry, embedded software and/or FPGA firmware development Co-ops in these positions work on several projects such as designing and building hardware to interface with state-of-the-art equipment and instrumentation, programming software to interface with this equipment, software for logging/processing test data, real time programming of mathematical algorithms, analyzing data and conducting live tests of sensors You will learn or strengthen practical skills such as electrical circuit design and troubleshooting, drafting electrical schematics, solid modeling, hardware interfacing, and electrical fabrication Undergraduate and Graduate students studying Electrical Engineering and Computer Engineering are preferred. Students must be available to work at the Warminster facility for a six month time period. Multiple vacancies are available. You will be subject to a government security investigation and you must be a U.S. citizen to apply. Employment with ARL will require successful completion of a pre-employment drug screen. FOR FURTHER INFORMATION on ARL, visit our web site at **************** **The proposed salary range may be impacted by geographic differential.** CAMPUS SECURITY CRIME STATISTICS: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act and the Pennsylvania Act of 1988, Penn State publishes a combined Annual Security and Annual Fire Safety Report (ASR). The ASR includes crime statistics and institutional policies concerning campus security, such as those concerning alcohol and drug use, crime prevention, the reporting of crimes, sexual assault, and other matters. The ASR is available for review here. Employment with the University will require successful completion of background check(s) in accordance with University policies. EEO IS THE LAW Penn State is an equal opportunity employer and is committed to providing employment opportunities to all qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are unable to use our online application process due to an impairment or disability, please contact ************. Federal Contractors Labor Law Poster PA State Labor Law Poster Penn State Policies Copyright Information Hotlines Warminster, PA

Job Description Come Join Our Team! First Division Consulting (FirstDiv) provides program management, acquisition, logistics, field service representative, explosive ordnance disposal, and personnel support services to Department of Defense and Federal Government Agencies. We are a Virgina Verified Service-Disabled Veteran-Owned Small Business and a Small Disadvantaged Business. If you are looking for a company who has an overall rating on Glassdoor of 4.8 and who puts their people first, then continue to read below and join the FirstDiv team! We are hiring a Maintainer Instructor to deliver high-quality sustainment and maintenance training for systems within the MAGTF C2 AC2 portfolio. The ideal candidate will bring expertise in Marine Corps maintenance procedures and a commitment to student success in a virtual learning environment. Responsibilities: Provide instructor-led training on configuration, diagnostics, and repair of AC2 systems. Assist in curriculum development and update job task data and test packages. Support training execution using instructional media, job aids, and performance evaluations. Execute preventive and corrective maintenance demonstrations during virtual and onsite sessions. Requirements Completion of a Formal School Instructor Course or equivalent technical instructor program. Familiarity with MACCS systems and Marine Corps/Navy maintenance practices. Two or more years of experience maintaining Link 16, JREAP, and tactical network systems. Experience with Cisco networking hardware and virtualized server environments. Strong understanding of electromagnetic spectrum principles. An Active Secret clearance is Required. Must be a US citizen. Physical Requirements: While performing the duties of this job, the employee may be regularly required to stand, sit, talk, hear, reach, stoop, kneel, and use hands and fingers to operate a computer, telephone, and keyboard. Specific vision abilities required by this job include close vision requirements due to computer work. Light to moderate lifting may be required. Regular, predictable attendance is required; including quarter-driven hours as business demands dictate. Work Environment: The work environment characteristics described here are representative of those a teammate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Moderate noise (i.e., business office with computers, phone, and printers, light traffic). Ability to work in a confined area. Ability to sit at a computer terminal for an extended period. Benefits Medical, dental, vision, life insurance, STD, LTD, holidays, PTO and 401(k) plan with company match. First Division Consulting is an Equal Opportunity Employer. All employment decisions are based on merit, qualifications, skills, and abilities. All fully qualified applicants will receive equal consideration for employment in accordance with all applicable federal, state, and/or local laws prohibiting discrimination by protected classes.

Are you ready to be part of a company that's not just talking about the future, but actively shaping it? Join The AES Corporation (NYSE: AES), a Fortune 500 company that's leading the charge in the global energy revolution. With operations spanning 14 countries, AES is committed to shaping a future through innovation and collaboration. Our dedication to innovation has earned us recognition as one of the Top Ten Best Workplaces for Innovators by Fast Company in 2022. And with our certification as a Great Place to Work, you can be confident that you're joining a company that values its people just as much as its groundbreaking ideas. AES is proudly ranked #1 globally in renewable energy sales to corporations, and with $12.7B in revenues in 2023, we have the resources and expertise to make a significant impact as we provide electricity to 25 million customers worldwide. As the world moves towards a net-zero future, AES is committed to meeting the Paris Agreement's goals by 2050. Our innovative solutions, such as 24/7 carbon-free energy for data centers, are setting the pace for rapid, global decarbonization. If you're ready to be part of a company that's not just adapting to change, but driving it, AES is the place for you. We're not just building a cleaner, more sustainable future - we're powering it. Apply now and energize your career with a true leader in the global energy transformation. AES Ohio serves approximately 500,000 customers in a 6,000 square-mile service area in Southwest-Central Ohio. This includes 1,800 miles of transmission lines and over 150 substations. Under limited direction, the System Operator controls and operates the Company's transmission, substation and mainline distribution resources and monitors generation resources from a reliability perspective. Also achieves and maintains operating standards in compliance with all existing NERC, PJM and PUCO regulations, plus company safety and operating standards. Operates the transmission system, which includes responsibility for VAR flow, maintaining acceptable voltage levels, and monitoring for first contingency loading and voltage violations. Coordinates and directs all switching operations on the transmission, substation and mainline distribution system. This is a rotating shift work position that requires around the clock coverage. The current 12 hour schedule does will include some nights, weekends and holidays. Under direct supervision, the System Operator is responsible for the safe, stable, reliable, economical, and environmentally correct operation of the Bulk Electric System. This responsibility extends from the generating station substations through the distribution substations to the first interrupting device. The System Operator Trainee is responsible for successfully completing the System Operator Training Program and complying with FERC, NERC, PJM, and RF requirements.Key Responsibilities: Promote a safe working environment both inside and outside the department. Complete the System Operator training requirements and pass the NERC and PJM certification tests. Possess a working knowledge of computer software such as MS Office. Essential Duties and Responsibilities: Implement real-time actions, up to and including shedding firm load, to ensure stable and reliable operation of the Bulk Electric System. Direct all actions for the safety and reliability of the electric grid, including field crews, electrical equipment, and customers in matters that affect electric grid reliability. Direct all switching and tagging activities to achieve LOTO isolation on transmission, substation, and mainline distribution equipment for both scheduled and outage situations. Serve as the first line of communication for real-time operations with PJM and interconnected utilities to assure the reliability of the transmission network. Ensure compliance with strict Standards of Conduct, as well as NERC and PJM protocols for transmission services. Operate the system on a minute-by-minute basis to ensure frequency is maintained by generation meeting load requirements. Respond to transmission and distribution disturbances within established regulatory, industry, and company standards to ensure a continuous supply of electricity to customers. Communicate the status of abnormal system conditions to co-workers and management. Monitor and utilize reactive reserves to ensure system reliability. Mentor System Operator Trainees through the Operator training game plan. Annually review and update department Standard Operating Procedures. Utilize the system model to simulate removing transmission elements from service and review resulting contingency analysis to prevent any real-time violations. Be knowledgeable of the procedures to transfer operations to the Back-up Control Center and implement them if necessary. Competencies: Develop and maintain knowledge of the company's substation, distribution, and transmission systems, relay protection schemes, safety requirements, electrical theory, field equipment capabilities, and associated operating procedures and guidelines. Show a strong desire for additional training and progress towards the Lead System Operator position. Demonstrate a strong sense of ambition, motivation, and confidence. Ability to work in a stressful and fast-paced environment. Ability to make sound judgments and crucial decisions in short amounts of time. Ability to understand and assimilate complex technical information. Ability to build and maintain relationships with teammates and external utility contacts. Ability to work with little supervision and only general guidelines at times. Qualifications: Minimum Education and/or Experience: A Bachelor's degree in engineering or another technical discipline is desired. An Associate's degree showing an aptitude for math and electrical theory, including previous work experience demonstrating basic electrical utility knowledge, or an equivalent combination of education and/or experience related to the discipline. Certificates, Licenses, Registrations: Must already have or obtain the appropriate North American Electric Reliability Corporation Certification within one year of employment and before independently performing the Reliability functions. This Certification must be maintained with continuing education hours. Must already have or obtain the appropriate PJM Certification within one year of employment and before independently performing the Reliability functions. This Certification must be maintained with continuing education hours. Communication Skills: Ability to read and comprehend complex instructions, correspondence, and memos. Strong oral and written communication skills. Mathematical Skills: Ability to apply concepts of algebra and geometry, and basic electrical theory. Computer Skills: Working knowledge of various database, spreadsheet, and word processing software. Ability to use various computer systems. Analysis and Problem-Solving Ability: Gather and analyze many complex variables to recommend decisions on complex issues under rapid and severe time constraints. Combine complex data sets including weather, grid conditions, electrical voltages, customer load, power plant capabilities, system disturbance data, interconnected utility conditions, etc., to determine actions required to ensure continuous operation and reliability on the electrical grid. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Decision Making: Has the authority to take or direct timely and appropriate real-time actions, without obtaining approval from higher-level personnel within their own operating authority vicinity. During emergency operating conditions, has additional independent authority to shed firm load to prevent or alleviate Operating Security Limit violations without higher-level approval. Scope and Impact: As the authority in charge of control room operations, any errors in switching procedures, miscommunication, or errors in analysis could result in serious injury or death to field employees and damage to valuable equipment. Physical Demands: Ability to stand up to 2/3 of the time. Must occasionally lift and/or move up to 25 pounds. Ability to accept the mental and physical rigors of rotating shift work, constantly changing system conditions, and varying operating guidelines. Work Environment: Control room environment System Operator This position is covered by NERC CIP cyber security standards. Prior to being hired, promoted, or transferred into the position, the candidate must successfully pass a Personnel Risk Assessment, which includes identity verification and a criminal background check. Before being granted unescorted access to cyber secure areas, the candidate must attend cyber security training. Annual cyber security training is also required. AES is an Equal Opportunity Employer who is committed to building strength and delivering long-term sustainability through diversity and inclusion. Respecting all backgrounds, differences and perspectives enables us to improve the lives of our people, customers, suppliers, contractors, and the communities in which we live and work. All qualified applicants will receive consideration for employment without regard to sex, sexual orientation, gender, gender identity and/or expression, race, national origin, ethnicity, age, religion, marital status, physical or mental disability, pregnancy, childbirth, or related medical condition, military or veteran status, or any other characteristic protected under applicable law. E-Verify Notice: AES will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's I-9 to confirm work authorization.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning 12,000 strong organization as we fuel the world and each other! Summary: Station Operators are responsible for all activity within assigned facilities with emphasis placed on safety, security, and efficient operations. The Station Operator controls all aspects of inbound/outbound movements, product storage, and assists/performs equipment maintenance and repairs. Job activities also include compliance with operating procedures, constant monitoring of product movement equipment, and record keeping for code compliance, leak detection and inventory. Essential Duties & Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Under general supervision of Station/Terminal Supervisor is engaged in operating Station/Terminal equipment in connection with receiving, storing, transferring, delivering petroleum, and maintaining related records. * Personally, is engaged in the inspection and operation of mainline pumps, handling principal contacts and planning, guiding, coordinating with operations to meet operating requirements and prevent material contamination. * Coordinates product movement with Dispatching Department and shippers. Makes visual checks of meters, gauges, and pump station equipment. * Performs quality control, identifies product changes as required. * Performs utility notification duties during off peak hours and weekends as required. * Assigned to a 12-hr. rotating shift. Subject to shift hold over or shift reassignment. Follows a Primary relief schedule during off hours and is subject to call out at all hours * Responsible for safety, security, and efficient operation of product movement at Pipeline facilities * Maintain maintenance requirements to maximize equipment availability and reliability * Support equipment installation and repairs, perform general day-to-day activities, make notifications/schedule/perform required maintenance activities, and maintain related code compliance on equipment * Maintain Operator Qualifications to operate assets/equipment, monitor flow, pressure, inventory, metering, etc. as needed to achieve desired operating conditions * Read and perform routine equipment checks * Perform regulatory required inspections of facility, environment, and equipment * Comply with all Partnership and regulatory required procedures * Read and understand flow, piping and instrumentation drawings and schematics * Participate in facility project planning to maximize operational efficiency * Ability to work in a 24/7 operational environment which could include shift rotations, nights, weekends, holidays, etc. * Able to support existing call-out/on-call requirements and adapt to meet additional Partnership needs as required Special Considerations: * Must reside within 45 miles of reporting location. The described job duties are a framework in which work will be assigned. This description is not inclusive of all responsibilities or job assignments. This position will require extended off-hour duties at times. Required education or minimum level: * High School Diploma or GED Required Qualifications: * Must have strong commitment to safety * Capable of compliance with Partnership and regulatory policies * Team oriented, self-motivated and flexible * Must have a valid driver's license and safe driving habits * Capable of self-directed work, planning, and organization * Excellent written and verbal communication skills with the ability to work effectively in a group environment Preferred Qualifications: * Previous work background in related industrial environment * Petroleum measurement experience such as metering, proving, hand lining, and BS&W verification * Proficiency with computers including HMI, SAP, MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, on-line work applications and documentation Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays

The Station Operator is multi-skilled position that is responsible for the operation and maintenance of gathering system compressor stations. Other responsibilities include, but are not limited to: Daily documentation of equipment, performing housekeeping, maximizing throughput, performing minor maintenance on engines, compressors, separators, generators, flares, dehy's, VRU's and coolers, as well as locating pipelines around the compressor station. Work with craft personnel to ensure any equipment/system problems are resolved in a timely manner. Responsible for operation of compressor stations which may include Caterpillar & Waukesha engines driving Aerial compressors. Responsible for troubleshooting abnormal operations, coordinating and monitoring activities of contractor personnel assigned to the area. Identify emergency situations and initiate emergency response procedures. Complete and maintain required reports and logs. Monitor and adjust, as required or needed, equipment to maintain optimum availability and efficiently. The following Expectations will be used: * To provide initial and ongoing training in your work duties and assignments * To provide your work progress for the next evaluation period * To evaluate your work-related conduct during the course of your employment * To provide a 90 day evaluation on employees Expectations of Duties, Responsibilities and Standards: * Efficiently and safely operate natural gas compressor stations and associated midstream equipment * Work within the guidelines and parameters established by ShalePro Energy Services for safety and operations. Be knowledgeable of company, state and federal regulatory requirements. * Read and record the amounts natural gas, condensate, and production water/brine received, delivered and consumed * Report operational temperature and pressure parameters as needed in operating logs. * Observe and inspect equipment to confirm it is working properly. * Document readings such as temperature, pressure and runtime hours * Monitor and report the availability of the compressor units * Inspect, maintain and repair basic equipment as needed, including but not limited to pipelines, compression and measurement facilities. * Ensure all field equipment is operating under current emissions guidelines and standards. * On-call responsibility for areas of responsibility as needed * Maintain working knowledge of regulatory requirements (OSHA, DOT etc.) document required regulatory activities. * Proved knowledge and understanding of procedures used requirements * Plan, organize and prioritize assigned responsibilities and work independently. * Maintain current safety orientation and understand and follow all PPE requirements * Manage all activities with a focus on safety and compliance * Use proper tools and equipment to perform integrity management and regulatory tasks on oil or liquids pipelines * Monitor activity in and around pipeline and facilities and respond as necessary to protect system integrity * Maintain required forms, records and reports (daily logs, Eam, shift reports) * Understand and support clients reporting procedures for abnormal operations, safety and environmental conditions * Respond to emergencies, perform cleanup associated with field ops and corrosion control activities * Increase communication to client's supervisors regarding safety and environmental concerns as well as provide potential solutions for corrective actions * Follow and promote good housekeeping practices and properly maintain equipment and vehicles * Follow ShalePro Energy Services fatigue program * Regularly required to lift, move and carry up to 50 pounds * Must be able to work Days, Nights, Weekends & Holidays Skills and Abilities: Ability to: * Perform all essential duties. * Demonstrate customer service skills. * Read, write and speak English (work orders, manuals, etc.) * Model all health, safety and environmental procedures. * Use computer skills, including vendor specific programs (Cat, Waukesha, Ariel, Murphy, etc.), Internet Explorer and Outlook. * Regularly complete and submit company required documentation in an accurate and timely fashion. * Respond to afterhours request on an on-call basis. * Ability to work 12-16 Hours straight while managing rest during time off. Minimum Education and Certification: * High school diploma or equivalent preferred. * Valid driver's license and a good driving record. * Gas or Diesel Mechanics Preferred Pay/ Benefits: * Entry Level Starting @ $20-$25 hr. * Additional Pay based on Field Related Experience * By-Weekly Pays * Medical * Dental * Vision * Company Paid Supplemental Coverage * 401K Matching * Vacation After 90 Days * 7 Paid Holidays * Referral Bonuses * On-Call Pay * Company Truck & Fuel Card * Overtime opportunities This job description is a summary of essential job functions. It is not intended as an employment contract, nor is it intended to describe all duties someone in this position may perform. All employees are expected to perform tasks, as assigned by supervisor, regardless of job title or routine job duties.

Blending System Operator (Afternoon Shift 3pm-11pm) Summary/Objective The Utility Operator position primarily sets up and ensures the continuous operation of the blend systems in conjunction with our extruder line(s) while under supervision and direction of the production supervisor. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Follow production work orders/recipes to mix raw material batches for production • Utilize mixing/blending equipment and tumblers to weigh and sift all compounds • Utilize equipment to ensure batches are within tolerance • Stage all batches to be used on the production line • Complete daily inventory to verify inventory • Clean all containers, equipment and working area to prevent contamination Required Education and Experience HS Diploma or GED Math and Computer Skills Hand Tools and Measuring Devices (micrometer, tape measure) Forklift Experience Demonstration of good communication skills Competencies Technical Capacity Organizational Skills Math/Measurement Skills Work Environment While performing the duties of this job, the employee is frequently exposed to heat, moving mechanical parts, and possible fumes. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee must stand 8-12 hours per day and is occasionally required to bend, squat, climb, reach, stoop, kneel, crouch or crawl. The employee must occasionally lift, push, pull or move up to 50 pounds. Position Type/Expected Hours of Work This is a full-time position, Monday through Friday, 8-hour shift. Additional hours during the week or on weekends may be required according to production demands. This utility role may require covering afternoon or midnight shifts on a temporary basis if/when necessary. and with the associated shift differentials when applicable. Travel No travel is expected for this position. Supervisory Responsibility This position has no supervisory responsibilities. AAP/EEO Statement SIMONA Boltaron is an Equal Opportunity Employer Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Pay $16.00 per hour + $1 Shift Differential. Monthly bonus program.

Incumbent is responsible for the operation, maintenance, and monitoring of the pump stations, associated equipment, gravity and pressure mains in the collection system. Incumbent is responsible for the operations and maintenance of the motorized heavy equipment, tanker trucks, flush trucks, camera tucks and performing routine maintenance on collection system equipment in the collection system. ESSENTIAL JOB FUNCTIONS: Perform or assist in the performance of the installation, operation, maintenance, repair, replacement and cleaning of a wide variety of equipment used in conjunction with the Collection System. Collect information by reading dials, multimeters, gauges, charts and recorders, and record information by means of electronic and hand-written data entry. Troubleshoot, draw conclusions and take necessary actions for pump station's motors, valves, meters, compressors, generators, drive units, level control devices, lifting devices, bearings and seals, and other equipment. Perform installation, repair, maintenance and replacement of equipment and facilities, clean wet wells, grease traps, and trash traps. Operate flush or crane trucks associated with these tasks. Perform precision work; diagnose mechanical, electrical, electronic, hydraulic and pneumatic problems. Proficient use of welders, cutting torches, drills, saws, alignment tools and a variety of other hand tools. Maintain a safe and clean working environment and abide by all health and safety procedures, rules and regulations adopted by the Department. Operate motorized heavy equipment including, but not limited to, dump truck, track loaders, mini excavators, front end loaders, equipment used in transporting the above listed equipment, powered industrial truck (forklift), truck mounted crane, flush truck, camera truck and tanker truck. Operate sludge processing and disposal equipment, transport liquid and cake sludge to disposal sites from various wastewater treatment plants. Operate tanker trucks associated with these tasks. Perform installation, repair, maintenance and replacement of equipment and facilities, clean wet wells, grease traps, and trash traps. Operate flush or crane trucks associated with these tasks. Perform daily safety and maintenance checks of equipment and vehicles. Operate all heavy equipment in a safe and efficient way according to all relevant manufacture's recommendations, policies and procedures. Perform maintenance and repair facilities and grounds. Collect wastewater samples from various facilities as required and deliver samples as directed to the testing laboratory. Troubleshoot, draw conclusions and take corrective action for gravity and pressure main problems in the collection system. Respond to and resolving customer inquiries and complaints. Operate powered industrial truck (fork lift). Operate mounted crane truck. Demonstrate regular and predictable attendance. Operate a motor vehicle as needed to perform the essential functions. NON-ESSENTIAL JOB FUNCTIONS: Performs other job related duties as assigned. JOB REQUIREMENTS: Equipment: Ability to use the following equipment: vehicles, various hand and power tools, welding equipment, cutting torches, and wastewater sampling equipment. Critical Skills/Expertise: Knowledge of Ohio and Federal environmental laws and regulations. Knowledge of County and Departmental policies and procedures. Knowledge of pump station and wastewater treatment plant operations. Knowledge of chemical testing procedures. Knowledge, ability and skills in mechanical, electrical, plumbing, carpentry, and construction installation and repair procedures. Knowledge of standard practices, methods, materials, tools and safety procedures relevant to the maintenance of the Collection System Equipment. Knowledge of System Control and Data Acquisition (SCADA) and the ability to troubleshoot. Knowledge of working with electricity as well as electrical safety and lock out procedures. Ability to read and interpret drawings, specifications and technical manuals for maintaining equipment. Ability to keep good records of daily activities. Ability to work alone, to cooperate with co-workers on group projects and to effectively deal with the public. Ability to use basic mathematical calculations. Ability to effectively monitor and coordinate maintenance activities. Ability to understand oral and written communications. Ability to perform precision work, diagnose mechanical, electrical, electronic, hydraulic and pneumatic problems. Ability to maintain electronic files on computer for accurate work records. Ability to produce handwritten communications, type on a computer or typewriter, operate fax machines, copiers, or other light office equipment. Ability to work in confined spaces, elevated areas, and work around industrial chemicals found The the Collection and Distribution System. DIFFICULTY OF WORK: Work involves moderately complex, relatively standardized tasks, processes and operations following established laws and procedures. RESPONSIBILITY: Supervisor provides general direction in following established practices and policies. Errors are readily detected in the normal course of work by standard checking resulting in little or no difficulty in loss of time to correct. In emergency or critical situations, this position must exercise independent judgment when interpreting general policies and procedures, in addition to resolving work problems relating to a variety of equipment at the pumping stations. PERSONAL WORK RELATIONSHIPS: Incumbent has contact with co-workers and the general public. PHYSICAL EFFORT AND WORK ENVIRONMENT: Physical Requirements: Incumbent's work is identified as heavy work, requiring the lifting of up to one hundred (100) pounds occasionally. Physical Activity: Incumbent performs the following physical activities: climbing, balancing, stooping, kneeling, crouching, crawling, reaching, walking, pushing, pulling, lifting, fingering, grasping, feeling, talking, hearing, driving and repetitive motions. Visual Activity: Incumbent performs work where the seeing job is at or within arm's reach. Must be able to drive an automobile. Job Location: Incumbent works inside and outside with exposure to temperatures that range from below 32 degrees to above 100 degrees for periods of more than one hour. Incumbent is occasionally exposed to hazards and atmospheric conditions. Incumbents may be required to use a respirator and air monitoring equipment. Hours of Work: The Collection System is 24 hours per day, 7 days per week operation. The position of Collection System Mechanic functions with limited supervision. In addition to normally assigned shifts, the Collection System Mechanic is required to respond when requested during non-scheduled hours. The duties listed above are intended as illustrations of the types of work that may be performed. The omission of specific job duties does not exclude them from the position if the work is similar, related or a logical assignment to the position. The job description does not constitute an employment contract and is subject to change as the needs of the department.

Transmission Line Subject Matter Expert Exciting opportunity for technical Transmission Line Engineers to support a major utility as an Owner's Representative with the chance to work remotely with up to 25% travel for site visits and to HQ! The TLine SME position is a remote technical position covering all aspects of transmission line design and construction. The applicant will be actively engaged in team meetings and projects where communication and a team-oriented mindset are critical. Less experienced team members look to the TLine SME team for technical guidance and leadership. The applicant must be able to assert accurate responses within project timeframes. The TLine SME team consists of multiple disciplines, the applicant must be comfortable engaging other TLine SME expertise as needed to provide the best responses to the Project Engineers. Applicants must have one area of expertise and be capable and enthusiastic to learn areas outside their expertise. Remote Work Expectations To be successful working remotely, applicants will need an aggressive mindset. The independence of remote work can isolate passive personalities. The successful applicant will be required to have a dedicated workspace free from distractions. The TLine SME working hours are typically 9-5 EST Monday through Friday regardless of the applicant's time zone. Responsibilities * Provide A+ technical support to the Project Engineering teams while maintaining the schedule & budget of assigned projects. * Use in depth Transmission line knowledge, teamwork, and engineering judgement to respond to project RFIs. * Developing, interpreting, & implementing Transmission line standards. * Lead and Mentor Project Engineers to better understand technical requirements. * Identify and drive opportunities for process improvement. Requirements * B.S. in Engineering with a deep knowledge of at least one Transmission discipline. * Minimum of 8yrs technically supporting a variety of transmission line projects at 230kV or above. * Excellent communication skills! Able to convey complex ideas both written and verbally. * Aggressive and team-oriented mindset. * Willingness to learn new things and work outside of your comfort zone. * Assertive leadership qualities proven through project work. * Successful experience working with diverse teams. * Strong problem-solving skills with a sense of urgency. * Ability to make informed independent decisions which are not regularly subject to technical review. Preferred Skills * Professional Engineer certification. * Field experience. * Experience developing standards. Job Type & Location This is a Contract position based out of Kansas City, MO. Pay and Benefits The pay range for this position is $60.00 - $65.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully remote position. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

In this role, you will make an impact in the following ways: Product Software: This applied technology position will be involved in creating and managing the software that controls the operation of many Cummins' products in a variety of end use applications. Software Tools: This applied technology position will be involved in the identification and understanding of stakeholder requirements, specifications and the design, implementation, testing and/or release of software that interact with Cummins' products in a variety of customer applications. Hardware: This applied technology position creates and integrates electrical and electronic hardware that is essential to Cummins products. People in these positions will typically develop and validate electronic sensors, actuators, control units, harnesses, wiring practices, or control systems and associated analog and digital signals to ensure the consistent operation of Cummins' products in a variety of customer applications. Product Performance & Controls Integration: This product focused position tailors' electronic and electrical systems for Cummins products. People in these positions will translate product requirements into hardware and software technical requirements that control the operation of Cummins' products in a variety of customer applications. RESPONSIBILITIES To be successful in this role you will need the following: + Design and Application of Mechatronics Systems + Machine Integration and Optimization + Product Failure Mode Avoidance + Product Problem Solving + Product Verification and Validation Management + System Requirements Engineering + Decision quality + Drives results + Communicates effectively Deg r ee Programs Considered: Bachelor's, Master's, PhD Major Programs Typically Considered: All Engineering Majors QUALIFICATIONS 2026 Monthly Salary Range by Degree Level: + Bachelor's - $3,900 - $5,000 + Master's - $6,000 + PhD - $7,300 Please note that the salary range provided is a good faith estimate of the applicable range. The final salary offer will be determined after considering relevant factors, including a candidate's qualifications and experience, where appropriate. Co-Op program criteria: + Must be a full-time enrolled student pursuing an undergraduate or graduate degree at an accredited U.S. college/university + Minimum 2.5 or above GPA preferred + Must be able to complete a minimum of 4-months to 6-months or a maximum of a 12-months commitment + Must be able to complete 40 hours per week + Willingness to learn from others on the job + Must be currently residing within the continental U.S. Compensation and Benefits Base salary rate commensurate with experience. Additional benefits vary between locations and include options such as our 401(k) Retirement Savings Plan, Cash Balance Pension Plan, Medical/Dental/Life Insurance, Health Savings Account, Domestic Partners Coverage, and a full complement of personal and professional benefits. Cummins and E-verify At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Cummins validates the right to work using E-Verify. Cummins will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. Ready to think beyond your desk? Apply for this opportunity to start your career with Cummins today. careers.cummins.com Not ready to apply but want to learn more? Join our Talent Community to get the inside track on great jobs and confidentially connect to our recruiting team: ****************************** Job Engineering Organization Cummins Inc. Role Category On-site with Flexibility Job Type Student - Cooperative/12 Month Placement ReqID 2422742 Relocation Package No 100% On-Site No Cummins and E-Verify At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Cummins validates the right to work using E-Verify and will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. Visit *************** to know your rights on workplace discrimination.

Come Join Our Team! First Division Consulting (FirstDiv) provides program management, acquisition, logistics, field service representative, explosive ordnance disposal, and personnel support services to Department of Defense and Federal Government Agencies. We are a Virgina Verified Service-Disabled Veteran-Owned Small Business and a Small Disadvantaged Business. If you are looking for a company who has an overall rating on Glassdoor of 4.8 and who puts their people first, then continue to read below and join the FirstDiv team! We are hiring a Maintainer Instructor to deliver high-quality sustainment and maintenance training for systems within the MAGTF C2 AC2 portfolio. The ideal candidate will bring expertise in Marine Corps maintenance procedures and a commitment to student success in a virtual learning environment. Responsibilities: Provide instructor-led training on configuration, diagnostics, and repair of AC2 systems. Assist in curriculum development and update job task data and test packages. Support training execution using instructional media, job aids, and performance evaluations. Execute preventive and corrective maintenance demonstrations during virtual and onsite sessions. Requirements Completion of a Formal School Instructor Course or equivalent technical instructor program. Familiarity with MACCS systems and Marine Corps/Navy maintenance practices. Two or more years of experience maintaining Link 16, JREAP, and tactical network systems. Experience with Cisco networking hardware and virtualized server environments. Strong understanding of electromagnetic spectrum principles. An Active Secret clearance is Required. Must be a US citizen. Physical Requirements: While performing the duties of this job, the employee may be regularly required to stand, sit, talk, hear, reach, stoop, kneel, and use hands and fingers to operate a computer, telephone, and keyboard. Specific vision abilities required by this job include close vision requirements due to computer work. Light to moderate lifting may be required. Regular, predictable attendance is required; including quarter-driven hours as business demands dictate. Work Environment: The work environment characteristics described here are representative of those a teammate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Moderate noise (i.e., business office with computers, phone, and printers, light traffic). Ability to work in a confined area. Ability to sit at a computer terminal for an extended period. Benefits Medical, dental, vision, life insurance, STD, LTD, holidays, PTO and 401(k) plan with company match. First Division Consulting is an Equal Opportunity Employer. All employment decisions are based on merit, qualifications, skills, and abilities. All fully qualified applicants will receive equal consideration for employment in accordance with all applicable federal, state, and/or local laws prohibiting discrimination by protected classes.

APPLICATION INSTRUCTIONS: * CURRENT PENN STATE EMPLOYEE (faculty, staff, technical service, or student), please login to Workday to complete the internal application process. Please do not apply here, apply internally through Workday. * CURRENT PENN STATE STUDENT (not employed previously at the university) and seeking employment with Penn State, please login to Workday to complete the student application process. Please do not apply here, apply internally through Workday. * If you are NOT a current employee or student, please click "Apply" and complete the application process for external applicants. Approval of remote and hybrid work is not guaranteed regardless of work location. For additional information on remote work at Penn State, see Notice to Out of State Applicants. JOB DESCRIPTION AND POSITION REQUIREMENTS: We are seeking Undergraduate and Graduate Student Co-ops to join the Navigation Research and Development Division (NRDD), of The Applied Research Laboratory (ARL) at Penn State, located in Warminster, PA, to support research, development, and engineering activities. NRDD is focused on developing the most advanced navigation technologies in the world, built around unique laboratories specially designed to test the most precise navigation sensors and systems. The mission of the NRDD is to conduct new navigation technology research and development, systems engineering and to provide expert knowledge for our Navy, Army, and other U.S. government sponsors. As an embedded systems and hardware co-op you will: * Support laboratory operations related to the development, testing, and evaluation of navigation systems * Work with a cooperative team of scientists and engineers responsible for a mix of hands on work, entry level electrical/mechanical design and software and/or firmware development * Work on several projects such as designing and building hardware to interface with state-of-the-art equipment and instrumentation, programming software to interface with this equipment, software for logging/processing test data, test fixture design, performing tests and analyzing data * Learn or strengthen practical skills such as C++/C#/Python/MATLAB programming, drafting electrical schematics, solid modeling, hardware interfacing, and electrical fabrication. Students studying Electrical Engineering and Computer Engineering are preferred. Students must be available to work at the Warminster facility for a six month time period. Penn State's Applied Research Laboratory (ARL) is a Department of Defense (DoD) designated University Affiliated Research Center (UARC), which serves as a center of research excellence in a multitude of areas. ARL conducts basic and applied research, exploratory development, and advanced development in support of the U.S. government organizations; contributes to the educational objectives and research goals of Penn State; and promotes the transfer of advanced technology to the U.S. government. You will be subject to a government security investigation, and you must be a U.S. citizen to apply. Employment with the ARL will require successful completion of a pre-employment drug screen. FOR FURTHER INFORMATION on ARL, visit our web site at **************** CAMPUS SECURITY CRIME STATISTICS: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act and the Pennsylvania Act of 1988, Penn State publishes a combined Annual Security and Annual Fire Safety Report (ASR). The ASR includes crime statistics and institutional policies concerning campus security, such as those concerning alcohol and drug use, crime prevention, the reporting of crimes, sexual assault, and other matters. The ASR is available for review here. Employment with the University will require successful completion of background check(s) in accordance with University policies. EEO IS THE LAW Penn State is an equal opportunity employer and is committed to providing employment opportunities to all qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are unable to use our online application process due to an impairment or disability, please contact ************. Federal Contractors Labor Law Poster PA State Labor Law Poster Penn State Policies Copyright Information Hotlines Warminster, PA

The Station Operator is multi-skilled position that is responsible for the operation and maintenance of gathering system compressor stations. Other responsibilities include, but are not limited to: Daily documentation of equipment, performing housekeeping, maximizing throughput, performing minor maintenance on engines, compressors, separators, generators, flares, dehy's, VRU's and coolers, as well as locating pipelines around the compressor station. Work with craft personnel to ensure any equipment/system problems are resolved in a timely manner. Responsible for operation of compressor stations which may include Caterpillar & Waukesha engines driving Aerial compressors. Responsible for troubleshooting abnormal operations, coordinating and monitoring activities of contractor personnel assigned to the area. Identify emergency situations and initiate emergency response procedures. Complete and maintain required reports and logs. Monitor and adjust, as required or needed, equipment to maintain optimum availability and efficiently. The following Expectations will be used: To provide initial and ongoing training in your work duties and assignments To provide your work progress for the next evaluation period To evaluate your work-related conduct during the course of your employment To provide a 90 day evaluation on employees Expectations of Duties, Responsibilities and Standards: Efficiently and safely operate natural gas compressor stations and associated midstream equipment Work within the guidelines and parameters established by ShalePro Energy Services for safety and operations. Be knowledgeable of company, state and federal regulatory requirements. Read and record the amounts natural gas, condensate, and production water/brine received, delivered and consumed Report operational temperature and pressure parameters as needed in operating logs. Observe and inspect equipment to confirm it is working properly. Document readings such as temperature, pressure and runtime hours Monitor and report the availability of the compressor units Inspect, maintain and repair basic equipment as needed, including but not limited to pipelines, compression and measurement facilities. Ensure all field equipment is operating under current emissions guidelines and standards. On-call responsibility for areas of responsibility as needed Maintain working knowledge of regulatory requirements (OSHA, DOT etc.) document required regulatory activities. Proved knowledge and understanding of procedures used requirements Plan, organize and prioritize assigned responsibilities and work independently. Maintain current safety orientation and understand and follow all PPE requirements Manage all activities with a focus on safety and compliance Use proper tools and equipment to perform integrity management and regulatory tasks on oil or liquids pipelines Monitor activity in and around pipeline and facilities and respond as necessary to protect system integrity Maintain required forms, records and reports (daily logs, Eam, shift reports) Understand and support clients reporting procedures for abnormal operations, safety and environmental conditions Respond to emergencies, perform cleanup associated with field ops and corrosion control activities Increase communication to client's supervisors regarding safety and environmental concerns as well as provide potential solutions for corrective actions Follow and promote good housekeeping practices and properly maintain equipment and vehicles Follow ShalePro Energy Services fatigue program Regularly required to lift, move and carry up to 50 pounds Must be able to work Days, Nights, Weekends & Holidays Skills and Abilities: Ability to: Perform all essential duties. Demonstrate customer service skills. Read, write and speak English (work orders, manuals, etc.) Model all health, safety and environmental procedures. Use computer skills, including vendor specific programs (Cat, Waukesha, Ariel, Murphy, etc.), Internet Explorer and Outlook. Regularly complete and submit company required documentation in an accurate and timely fashion. Respond to afterhours request on an on-call basis. Ability to work 12-16 Hours straight while managing rest during time off. Minimum Education and Certification: - High school diploma or equivalent preferred. - Valid driver's license and a good driving record. - Gas or Diesel Mechanics Preferred Pay/ Benefits: Entry Level Starting @ $20-$25 hr. Additional Pay based on Field Related Experience By-Weekly Pays Medical Dental Vision Company Paid Supplemental Coverage 401K Matching Vacation After 90 Days 7 Paid Holidays Referral Bonuses On-Call Pay Company Truck & Fuel Card Overtime opportunities This job description is a summary of essential job functions. It is not intended as an employment contract, nor is it intended to describe all duties someone in this position may perform. All employees are expected to perform tasks, as assigned by supervisor, regardless of job title or routine job duties. Powered by JazzHR W7v2fVkGg5

Transmission Line Subject Matter Expert Exciting opportunity for technical Transmission Line Engineers to support a major utility as an Owner's Representative with the chance to work remotely with up to 25% travel for site visits and to HQ! The TLine SME position is a remote technical position covering all aspects of transmission line design and construction. The applicant will be actively engaged in team meetings and projects where communication and a team-oriented mindset are critical. Less experienced team members look to the TLine SME team for technical guidance and leadership. The applicant must be able to assert accurate responses within project timeframes. The TLine SME team consists of multiple disciplines, the applicant must be comfortable engaging other TLine SME expertise as needed to provide the best responses to the Project Engineers. Applicants must have one area of expertise and be capable and enthusiastic to learn areas outside their expertise. Remote Work Expectations To be successful working remotely, applicants will need an aggressive mindset. The independence of remote work can isolate passive personalities. The successful applicant will be required to have a dedicated workspace free from distractions. The TLine SME working hours are typically 9-5 EST Monday through Friday regardless of the applicant's time zone. Responsibilities + Provide A+ technical support to the Project Engineering teams while maintaining the schedule & budget of assigned projects. + Use in depth Transmission line knowledge, teamwork, and engineering judgement to respond to project RFIs. + Developing, interpreting, & implementing Transmission line standards. + Lead and Mentor Project Engineers to better understand technical requirements. + Identify and drive opportunities for process improvement. Requirements + B.S. in Engineering with a deep knowledge of at least one Transmission discipline. + Minimum of 8yrs technically supporting a variety of transmission line projects at 230kV or above. + Excellent communication skills! Able to convey complex ideas both written and verbally. + Aggressive and team-oriented mindset. + Willingness to learn new things and work outside of your comfort zone. + Assertive leadership qualities proven through project work. + Successful experience working with diverse teams. + Strong problem-solving skills with a sense of urgency. + Ability to make informed independent decisions which are not regularly subject to technical review. Preferred Skills + Professional Engineer certification. + Field experience. + Experience developing standards. Job Type & Location This is a Contract position based out of Kansas City, MO. Pay and Benefits The pay range for this position is $60.00 - $65.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully remote position. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

In this role, you will make an impact in the following ways: + Investigates product and system problems, understands causal mechanisms, recommends appropriate action, may include activities in problem resolution and documents results with guidance from more experienced team members. + Focus is on the execution and improvement of established processes primarily documented in detailed local and global work instructions (EPs) that are required in Engineering Standard Work (ESW) and/or Design Validation Plans (DVP&R). + This is accomplished through standard, as well as development of specialized computational tools and methods that are required to support the Design and Validation processes and enable high confidence decision making. May assist more experienced team members in obtaining input from Design, Thermal Sciences, Materials and Product Validation and to deliver computer models and results for key structural performance parameters like motion, load, natural frequencies, stress, design margin, life, sound power to Design and Product Validation. + Uses formal training like Statics, Dynamics, Machine Design, Mechanics of Materials, Failure Analysis, Engineering Materials, and others along with tool specific training (ANSYS, FE-Safe, GT, AVL) to assist with making Design decisions based on numerical predictions of structural performance of components and systems. + May include activities in problem resolution for moderately complex components, products, systems, subsystems, or services. + Supervised execution of established work processes and systems, while still developing technology or product knowledge; engages with the improvement of systems and processes. + No direct management of people but could involve limited coordination of work amongst engineers or technicians. + Contributes effectively toward team goals and develops proficiency in the competency areas critical to success in the role. RESPONSIBILITIES To be successful in this role you will need the following: + Applies Principles of Fatigue and Durability + Applies Principles of Noise and Acoustics + Applies Principles of Dynamics and Vibration + Product Systems Modeling and Analysis + Systems Modeling and Simulation + Product Problem Solving + Applies Principles of Statistical Methods + Decision quality + Drives results + Communicates effectively Degree Programs Considered: Bachelor's, Master's, PhD Major Programs Typically Considered: All Engineering Majors QUALIFICATIONS 2025 Monthly Salary Range by Degree Level: + Bachelor's - $3,900 - $5,000 + Master's - $6,000 + PhD - $7,300 Please note that the salary range provided is a good faith estimate on the applicable range. The final salary offer will be determined after considering relevant factors, including a candidate's qualifications and experience, where appropriate. Co-Op program criteria: + Must be a full-time enrolled student pursuing an undergraduate or graduate degree at an accredited U.S. college/university + Minimum 2.5 or above GPA preferred + Must be able to complete a minimum of 4-months to 6-months or a maximum of a 12-months commitment + Must be able to complete 40 hours per week + Willingness to learn from others on the job + Must be currently residing within the continental U.S. Cummins and E-verify At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Cummins validates right to work using E-Verify. Cummins will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. Ready to think beyond your desk? Apply for this opportunity to start your career with Cummins today. careers.cummins.com Not ready to apply but want to learn more? Join our Talent Community to get the inside track on great jobs and confidentially connect to our recruiting team: ****************************** Job Engineering Organization Cummins Inc. Role Category On-site with Flexibility Job Type Student - Cooperative/12 Month Placement ReqID 2422782 Relocation Package No 100% On-Site No Cummins and E-Verify At Cummins, we are an equal opportunity and affirmative action employer dedicated to diversity in the workplace. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law. Cummins validates the right to work using E-Verify and will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. Visit *************** to know your rights on workplace discrimination.

APPLICATION INSTRUCTIONS: * CURRENT PENN STATE EMPLOYEE (faculty, staff, technical service, or student), please login to Workday to complete the internal application process. Please do not apply here, apply internally through Workday. * CURRENT PENN STATE STUDENT (not employed previously at the university) and seeking employment with Penn State, please login to Workday to complete the student application process. Please do not apply here, apply internally through Workday. * If you are NOT a current employee or student, please click "Apply" and complete the application process for external applicants. Approval of remote and hybrid work is not guaranteed regardless of work location. For additional information on remote work at Penn State, see Notice to Out of State Applicants. JOB DESCRIPTION AND POSITION REQUIREMENTS: We are seeking Undergraduate and Graduate Student Co-ops to support research, development, and engineering activities of the Navigation Research and Development Division (NRDD) part of The Applied Research Laboratory (ARL) at The Pennsylvania State University, located in Warminster, PA, Penn State's Applied Research Laboratory (ARL) is a Department of Defense (DoD) designated University Affiliated Research Center (UARC), which serves as a center of research excellence in a multitude of areas. ARL conducts basic and applied research, exploratory development, and advanced development in support of the U.S. government organizations; contributes to the educational objectives and research goals of Penn State; and promotes the transfer of advanced technology to the U.S. government. NRDD is a satellite campus of ARL focused on developing the most advanced navigation technologies in the world, built around unique laboratories specially designed to test the most precise navigation sensors and systems. The mission of the NRDD is to conduct new navigation technology research and development, systems engineering and to provide expert knowledge for our Navy, Army, and other U.S. government sponsors. You will: * You will support laboratory operations related to the development, testing, and evaluation of navigation systems * You will be working with a cooperative team of scientists and engineers responsible for a mix of hands on work with electrical circuitry, embedded software and/or FPGA firmware development * Co-ops in these positions work on several projects such as designing and building hardware to interface with state-of-the-art equipment and instrumentation, programming software to interface with this equipment, software for logging/processing test data, real time programming of mathematical algorithms, analyzing data and conducting live tests of sensors * You will learn or strengthen practical skills such as electrical circuit design and troubleshooting, drafting electrical schematics, solid modeling, hardware interfacing, and electrical fabrication Undergraduate and Graduate students studying Electrical Engineering and Computer Engineering are preferred. Students must be available to work at the Warminster facility for a six month time period. Multiple vacancies are available. You will be subject to a government security investigation and you must be a U.S. citizen to apply. Employment with ARL will require successful completion of a pre-employment drug screen. FOR FURTHER INFORMATION on ARL, visit our web site at **************** The proposed salary range may be impacted by geographic differential. CAMPUS SECURITY CRIME STATISTICS: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act and the Pennsylvania Act of 1988, Penn State publishes a combined Annual Security and Annual Fire Safety Report (ASR). The ASR includes crime statistics and institutional policies concerning campus security, such as those concerning alcohol and drug use, crime prevention, the reporting of crimes, sexual assault, and other matters. The ASR is available for review here. Employment with the University will require successful completion of background check(s) in accordance with University policies. EEO IS THE LAW Penn State is an equal opportunity employer and is committed to providing employment opportunities to all qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are unable to use our online application process due to an impairment or disability, please contact ************. Federal Contractors Labor Law Poster PA State Labor Law Poster Penn State Policies Copyright Information Hotlines Warminster, PA

The Station Operator is multi-skilled position that is responsible for the operation and maintenance of gathering system compressor stations. Other responsibilities include, but are not limited to: Daily documentation of equipment, performing housekeeping, maximizing throughput, performing minor maintenance on engines, compressors, separators, generators, flares, dehy's, VRU's and coolers, as well as locating pipelines around the compressor station. Work with craft personnel to ensure any equipment/system problems are resolved in a timely manner. Responsible for operation of compressor stations which may include Caterpillar & Waukesha engines driving Aerial compressors. Responsible for troubleshooting abnormal operations, coordinating and monitoring activities of contractor personnel assigned to the area. Identify emergency situations and initiate emergency response procedures. Complete and maintain required reports and logs. Monitor and adjust, as required or needed, equipment to maintain optimum availability and efficiently. The following Expectations will be used: To provide initial and ongoing training in your work duties and assignments To provide your work progress for the next evaluation period To evaluate your work-related conduct during the course of your employment To provide a 90 day evaluation on employees Expectations of Duties, Responsibilities and Standards: Efficiently and safely operate natural gas compressor stations and associated midstream equipment Work within the guidelines and parameters established by ShalePro Energy Services for safety and operations. Be knowledgeable of company, state and federal regulatory requirements. Read and record the amounts natural gas, condensate, and production water/brine received, delivered and consumed Report operational temperature and pressure parameters as needed in operating logs. Observe and inspect equipment to confirm it is working properly. Document readings such as temperature, pressure and runtime hours Monitor and report the availability of the compressor units Inspect, maintain and repair basic equipment as needed, including but not limited to pipelines, compression and measurement facilities. Ensure all field equipment is operating under current emissions guidelines and standards. On-call responsibility for areas of responsibility as needed Maintain working knowledge of regulatory requirements (OSHA, DOT etc.) document required regulatory activities. Proved knowledge and understanding of procedures used requirements Plan, organize and prioritize assigned responsibilities and work independently. Maintain current safety orientation and understand and follow all PPE requirements Manage all activities with a focus on safety and compliance Use proper tools and equipment to perform integrity management and regulatory tasks on oil or liquids pipelines Monitor activity in and around pipeline and facilities and respond as necessary to protect system integrity Maintain required forms, records and reports (daily logs, Eam, shift reports) Understand and support clients reporting procedures for abnormal operations, safety and environmental conditions Respond to emergencies, perform cleanup associated with field ops and corrosion control activities Increase communication to client's supervisors regarding safety and environmental concerns as well as provide potential solutions for corrective actions Follow and promote good housekeeping practices and properly maintain equipment and vehicles Follow ShalePro Energy Services fatigue program Regularly required to lift, move and carry up to 50 pounds Must be able to work Days, Nights, Weekends & Holidays Skills and Abilities: Ability to: Perform all essential duties. Demonstrate customer service skills. Read, write and speak English (work orders, manuals, etc.) Model all health, safety and environmental procedures. Use computer skills, including vendor specific programs (Cat, Waukesha, Ariel, Murphy, etc.), Internet Explorer and Outlook. Regularly complete and submit company required documentation in an accurate and timely fashion. Respond to afterhours request on an on-call basis. Ability to work 12-16 Hours straight while managing rest during time off. Minimum Education and Certification: - High school diploma or equivalent preferred. - Valid driver's license and a good driving record. - Gas or Diesel Mechanics Preferred Pay/ Benefits: Entry Level Starting @ $20-$25 hr. Additional Pay based on Field Related Experience By-Weekly Pays Medical Dental Vision Company Paid Supplemental Coverage 401K Matching Vacation After 90 Days 7 Paid Holidays Referral Bonuses On-Call Pay Company Truck & Fuel Card Overtime opportunities This job description is a summary of essential job functions. It is not intended as an employment contract, nor is it intended to describe all duties someone in this position may perform. All employees are expected to perform tasks, as assigned by supervisor, regardless of job title or routine job duties. Powered by JazzHR a3FCcpgfPo