Maintenance electrician jobs in Aspen Hill, MD - 1,064 jobs

Maintain and repair mechanical/electrical/boiler systems within a manufacturing environment; execute capital projects (installation, dismantling of equipment) and other various maintenance tasks throughout the facility. Expected hours of work 40 hours a week with a varied shift schedule 8-10 hours shifts with occasional overtime and weekend hours. No travel required. Duties And Responsibilities Reassemble machines after the completion of repair or maintenance work. Start machines and observe mechanical operation to determine efficiency and to detect problems. Inspect or test damaged machine parts and mark defective areas or advise supervisors of repair. Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment according to specific procedures. Install, replace, or change machine parts and attachments according to production specifications. Dismantle machines and remove parts for repair using hand tools, chain falls, jacks, cranes, or hoists. Record production, repair, and machine maintenance information. Read work orders and specifications to determine machines and equipment requiring repair or maintenance. Set up and operate machines and adjust controls to regulate operations. Transport machine parts, tools, equipment, and other material between work areas and storage, using cranes, hoists, or dollies. Collect and discard worn machine parts and other refuse in order to maintain machinery and work areas. Clean machines and machine parts, using cleaning solvents, cloths, air guns, hoses, vacuums, or other equipment. Other duties as assigned. Required Knowledge/Skills/Abilities Knowledge of measuring gauges such as tape measures Knowledge of various hand and power tools Prior experience operating a forklift. Ability to comprehend complex technical topics and specialized information. Effective communication and problem-solving skills Understanding of basic math, reading, and writing skills Ability to work under pressure to complete assigned tasks under stressful situations. Ability to use hand& portable tools, gas and arc welder, forklift, pickup truck, testing equipment, tape measure, computer (shop floor and ERP). Education And Experience Required: Education - High School diploma or GED required. One to two (1-2) years related maintenance experience. Previous experience in the following maintenance areas preferred: electrical, plumbing, carpentry, welding, and boiler. Mechanical background with rotating equipment. Hydraulic and pneumatic. Electrical/mechanical troubleshooting. Working Conditions Fast paced manufacturing environment where workers are exposed to both ambient/outside temperatures and dust; working with mechanical parts and pinch points; exposure to increased noise levels. Exposure to hazardous mechanical, electrical and chemical substances/equipment. Confined workspaces. Physical Requirements OCCASIONALLY FREQUENTLY CONTINUOUSLY (0-30%) (31-60%) (61-100%) LIFTING OR CARRYING 1-10 LBS X 11-20 LBS X 21-40 LBS X 41-50 LBS 51 OR MORE LBS Pushing Or Pulling 1-40 LBS X 41-50 LBS X 51 OR MORE LBS X BENDING OR STOOPING X REACHING ABOVE SHOULDER LEVEL X DRIVING AUTOMATIC EQUIP. VEHICLES X OPERATE MACHINERY OR POWER TOOLS X CLIMBING (LADDERS, STAIRS, ETC.) X WALKING X STANDING X SITTING X WORKING IN EXTREME TEMPERATURES X REPETATIVE MOTION INCLUDING BUT NOT LIMITED TO: WRISTS, HANDS AND/OR FINGERS) X VISION X HEARING X DEXTERITY X HAND EYE COORDINATION X Personal Protective Equipment (PPE) Used Eye and hearing protection is required at all times on the production floor. Safety toe shoes (steel/composite). Flame Resistant rated Maintenance uniform provided. Other PPE as defined by management within assigned department.

Maintenance Manager - Chemical Manufacturing Facility We are seeking an experienced Maintenance Manager to lead the maintenance function within a chemical manufacturing environment. This role plays a key part in ensuring plant reliability, safety, and overall performance. The ideal candidate will have a strong background in work‑order-driven maintenance systems and a commitment to implementing world‑class maintenance practices, including preventive, predictive, and reliability-centered methodologies. Key Responsibilities Develop, lead, and continuously improve a work order-based maintenance program to ensure efficient planning, scheduling, and execution of maintenance activities. Implement and sustain advanced maintenance strategies such as preventive and predictive maintenance, root cause failure analysis (RCFA), and reliability-centered maintenance (RCM). Supervise, mentor, and support maintenance technicians, planners, and support staff to ensure timely, high‑quality work completion. Partner with operations, engineering, and safety teams to identify maintenance priorities, improve equipment reliability, and support operational excellence initiatives. Manage maintenance budgets, spare parts inventory, and third‑party vendor relationships to optimize cost and ensure equipment reliability. Maintain compliance with all applicable environmental, health, safety (EHS), and regulatory requirements related to chemical manufacturing operations. Utilize a CMMS to oversee work orders, equipment history, performance metrics, and maintenance KPIs. Lead and support capital projects, turnarounds, and equipment upgrades. Drive continuous improvement using tools such as 5S, Lean, Six Sigma, and Total Productive Maintenance (TPM). Promote and enforce a strong safety culture across all maintenance activities. Qualifications Required Bachelor's degree in Mechanical, Electrical, Chemical Engineering, or related field (or equivalent relevant experience). Minimum 7 years of industrial maintenance experience, including at least 3 years in a supervisory or managerial role within a chemical or process manufacturing setting. Strong experience developing and managing work order systems, preferably using CMMS software (e.g., SAP PM, Maximo, eMaint). Deep knowledge of world‑class maintenance strategies such as RCM, TPM, PdM, and Lean Maintenance. Strong leadership, communication, and team‑building abilities. Knowledge of relevant regulatory and safety requirements (e.g., OSHA, PSM, EPA). Demonstrated ability to manage budgets, contractors, and cross‑functional initiatives. Preferred Professional certifications such as CMRP, CRL, or PMP. Experience working in Process Safety Management (PSM) environments. Familiarity with RCA, FMEA, and other reliability engineering tools and methodologies. What We Offer A workplace committed to safety and operational excellence. Opportunities for continuous learning, professional development, and career growth. A stable work environment with strong long-term business presence. Competitive compensation and benefits package. A diverse, collaborative, and positive work culture.

At Westminster, we pride ourselves on our four core values: Be Caring, Be Best in Class, Be Solution-Oriented, and Be Accountable. Our values represent what we strive to achieve every day. Every decision we have to make is guided by the “4 Be's”. Our team exemplifies what it means to live out these core values in our offices and at our communities day in and day out. Each new day is a learning experience at Westminster, whether it is the knowledge we bring, gain, or share during our journey together. Our team members are set up to aim beyond, achieve the utmost success, and for endless possibilities for growth. Come grow with us! Annapolis Roads Apartments, Annapolis, MD Ready to experience resort-style living from the comfort of your own home? Then you're ready for Annapolis Roads in exciting Annapolis, MD. This community offers every amenity imaginable, including a fully appointed clubhouse featuring a swimming pool, business center with free Wi-Fi, and a 24-hour fitness center. Bring your pet along for a stroll on our lovely grounds featuring mature shade trees, playground, and picnic center complete with gazebo. Join Our Team as a Property Maintenance Manager - Lead the Way in Property Maintenance! Are you ready to make a real impact and showcase your leadership skills in property management? At Westminster Management, we believe in empowering our team members to lead, grow, and thrive-and we want YOU to be part of our journey! As a Property Maintenance Manager, you'll oversee everything from daily maintenance tasks and building inspections to training and mentoring our team. You'll be key in keeping our property in top shape, building strong relationships with residents, and ensuring everything runs smoothly - rain or shine! What You'll Do: Lead with Excellence! Lead and supervise a dynamic maintenance team to deliver top-notch service. Own Your Own Impact! Oversee all community maintenance work, including service requests, preventive, and emergency repairs, and more! Master Maintenance! Maintain effective maintenance programs to protect and maintain the property. Stay Ahead! Keep an inventory of equipment, tools, and supplies. Be a Role Model! Serve as a role model for maintenance staff and set the standard for professionalism by following all policies and procedures. Safety First! Maintain a safe, sanitary, and comfortable living environment for residents and staff. Communicate Clearly! Communicate effectively with staff, residents, and property management leadership to ensure the community is well-maintained. Drive Results: Conduct cost-benefit analyses (in-house vs. contractor) and manage vendor contracts to optimize service delivery. Create and monitor the annual maintenance budget. Strategize for Success: Prepare maintenance reports, inventory updates, and team evaluations. Inspire Growth: Train, mentor, and inspire your maintenance staff to reach new heights. What You'll Bring to the Team: Experience That Shines: 3+ years of experience in multifamily property management or 5+ years in property management. Knowledge You Can Count On: In-depth knowledge of maintenance practices, safety protocols, and fair housing regulations. Leadership Skills: Leadership experience, with a track record of managing teams and fostering strong working relationships. Tech Savvy: Experience with property management software-Yardi preferred, purchase order systems, Microsoft Office, and collaboration tools like Teams and Zoom. Flexibility: Ability to work on-call and extended hours (including weekends and holidays). Hight Standards: A hands-on approach and a commitment to maintaining high standards of work and safety. Physical Readiness Comfortable with tasks that involve bending, kneeling, and working in confined spaces. Ability to climb ladders (up to 30 feet) and walk multiple flights of stairs daily. Flexibility to work indoors and outdoors, in all weather conditions. License: A valid Driver's License! Why You'll Love This Role: Competitive Pay & Perks! Your hard work and success are rewarded with great wages, bonuses and PTO! Awesome Benefits! We offer employee housing discounts, 401k match, health insurance with no waiting period, tuition reimbursement, relocation bonuses and more! Growth Opportunities! We're invested in your career and offer training and advancement paths. Team Spirit! Work with a supportive and fun group of people who value your contributions. Variety! Every day is different, keeping your work fresh and engaging. Make a Difference! Play a key role in creating a safe and welcoming community for residents. Apply now to start an exciting journey with Westminster, where your skills and leadership will be celebrated and rewarded! We're an Equal Opportunity Employer and Equal Housing Provider.

Loudoun County Government has been named one of Forbes' 2025 Best Large Employers! We're proud to be recognized nationally for our commitment to employee satisfaction and excellence in public service. At Loudoun County, we bring together talented professionals from all backgrounds to make a meaningful impact in a dynamic, growing community - that's The Loudoun Difference . Welcome and thank you for your interest in employment with Loudoun County Government! ALL SECTIONS OF THE APPLICATION MUST BE COMPLETED IN ITS ENTIRETY. THE RESUME IS CONSIDERED SUPPLEMENTAL INFORMATION ONLY. APPLICATIONS THAT ARE INCOMPLETE OR INDICATE 'SEE RESUME' WILL NOT BE TAKEN INTO CONSIDERATION. Job Summary Join the Loudoun County Department of General Services (DGS) as a Systems Maintenance Technician II and be part of a team that keeps our county's facilities running efficiently. We are seeking skilled plumbers, electricians, and HVAC technicians to help maintain and repair critical building systems across various county properties. If you have expertise in troubleshooting, repairing, and servicing mechanical, electrical, or plumbing systems and want to work in a dynamic and supportive environment, we encourage you to apply! Successful candidates will respond promptly and directly to work requests; diagnose, initiate, and complete minor mechanical, electric, and plumbing repairs in County Government facilities; receive and close-out work requests by computer and/or hand-held electronic device; inspect facilities and report HVAC, plumbing, and electrical problems or unsafe conditions; and routinely meet with County employees and supervisors when responding to work requests. Must provide superior customer service at all times. Hiring salary is commensurate with experience. Minimum Qualifications High school diploma or equivalent; two (2) years of related work experience in MEP trades (mechanical, electrical, plumbing), safety and security systems, or vehicle maintenance depending on assigned area; or equivalent combination of education and experience. The following are highly preferred, but are not required: * Prefer one to two years of Building Automation Systems (BAS) experience. * Prefer Community College HVAC & Refrigeration Program certificate (one-year program). * Prefer a state-issued Journeyman level certification. * Prefer additional certifications such as AWS welding, North American Technician Excellence (NATE) Master Level, Skills USA, and/or specialized systems manufacturer trainings. Job Contingencies and Special Requirements This position requires criminal, credit, and DMV background checks, to include criminal justice information system (CJIS) fingerprinting. A valid driver's license and good driving record are required (driving records may be reviewed annually for continued qualification). Hold or obtain CFC license (universal refrigerant recovery) and forklift license within six (6) months of hire. Must be able to work in extreme temperatures and lift up to 70 lbs and some work may be hazardous due to location or type of work. This positions is subject to recall or being held beyond scheduled workday. Must be available to respond to County emergencies (24/7) as directed in accordance with Department policy and written or verbal directive.. Requires on-call response to out-of-hour emergency/priority work requests on a rotating basis at one-week intervals approximately every six (6) weeks. This position is considered "essential."

RJY Group, LLC is seeking a skilled Maintenance Technician to provide preventative maintenance (PM) and repair services for centrifugal pumps, exhaust systems, and tube & bundle heat exchangers at the Washington DC Veterans Affairs Medical Center. This role involves ensuring equipment reliability, compliance with VA health care guidelines, mechanical codes, and safety standards in a healthcare environment. The technician will perform initial inventory, routine inspections, repairs, and reporting while minimizing disruptions to hospital operations. All parts, materials, labor, and equipment are provided by RJY Group as part of the contract. Key Responsibilities * Initial Equipment Inventory (One-Time Task): o Conduct a comprehensive inventory of all centrifugal pumps, heat exchangers, and exhaust systems. o Document details including location/space number, type and size, area supported, and equipment condition. o Record findings in an electronic Excel spreadsheet and submit to the Program Office Point of Contact. * Preventative Maintenance - Exhaust Fans (Annual Tasks): o Clean exhaust fan and housing. o Lubricate exhaust fan bearings and motor. o Check belts, sheaves, and fan rotation. o Record and verify operating amps. o Note and report any deficiencies discovered during inspections. * Preventative Maintenance - Pumps (12 Instances, Monthly): o Amp motors and verify operations. o Perform visual inspections for leaks. o Grease bearings and seals. o Tighten electrical connections. o Verify shaft alignment. o Conduct vibration analysis (annually). o Note and report any deficiencies. * Preventative Maintenance - Heat Exchangers (12 Instances, Monthly): o Perform physical external and internal checks for leaks (focusing on insulation and connection points). o Check for fouling, corrosion, and frame tightness. o Monitor pressure drop (action required if >5 psi); slowdown pressure drop if needed. o Verify accuracy of pressure gauges and thermometers. o Test inlet and outlet temperatures. o Inspect and replace tubes if damaged. o Clean heat transfer areas and flush exchangers to remove debris/buildup (using approved chemicals per user guide/warranty). o Inspect relief valves, control valves, and air vents for proper operation. o Clean up spilled chemicals, sweep areas, and remove debris. o Record results, data, and any deficiencies from maintenance tests. * Repair Services: o Identify defects or needed repairs during PM visits or emergency calls. o Provide written estimates for repairs/replacements to the Program Office Point of Contact. o Perform repairs on a case-by-case basis, including emergency fixes between PM visits (covered by contract rider for parts and labor). o Furnish all necessary parts, materials, lubricants, fluids, cleaning supplies, tools, manuals, and software. * Reporting and Documentation: o Submit detailed service reports after each visit, including: technician name, report number, date/time, equipment downtime, hours on-site, VA purchase order number, equipment details (name, location, manufacturer, model, serial, inventory/barcode), services performed, parts replaced, and performance test results. o Coordinate monthly/annual inspection dates with the Program Office Point of Contact to avoid disruptions. o Maintain hazardous material inventories and Material Safety Data Sheets (MSDS); report spills immediately and handle cleanup per 40 CFR Part 761. * Safety and Compliance: o Adhere to all Federal, State, and Local safety regulations, including OSHA (29 CFR Parts 1910/1926), NFPA (e.g., 10, 41, 70, 241), JCAHO, and VA Engineering SOPs. o Comply with non-personal services guidelines (no Government supervision of work methods). o Follow check-in/check-out procedures: Report to Maintenance & Operations Chief (Bldg. 6, Room BH102; Tel: ) upon arrival; wear issued ID badge; notify contact before leaving. o Park in designated contractor areas. o Ensure equipment functions per conformance standards (e.g., National Electric Code, Federal/State/Local regulations). * Other Duties as required. Qualifications and Requirements * Experience: Minimum 3-5 years in maintenance/repair of HVAC/refrigeration equipment, specifically centrifugal pumps, exhaust fans, and heat exchangers. Experience in healthcare or government facilities preferred. * Skills: Proficiency in vibration analysis, electrical troubleshooting, leak detection, and pressure/temperature testing. Strong mechanical aptitude; ability to use tools, software, and diagnostic equipment. * Education/Certifications: High school diploma or equivalent; technical certification in HVAC, mechanical engineering, or related field (e.g., EPA certification for refrigerants if applicable). Knowledge of NAICS 561210 (Facilities Support Services) and PSC J041 (Maintenance of Refrigeration/AC Equipment). * Other Requirements: o Ability to pass background checks for VA facility access. o Valid driver's license and reliable transportation. o Physical ability to perform tasks (e.g., lifting, climbing, working in confined spaces). o Strong attention to detail for reporting and safety compliance. o Familiarity with Microsoft Excel for inventory and reporting. o Commitment to non-disruptive work in a patient-care environment.

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The Electrician performs a variety of electrical trade functions such as the installation, maintenance, and repair of equipment for the generation, distribution, or utilization of electric energy. Work involves installing or repairing any of a variety of electrical equipment such as generators, transformers, switchboards, controllers, circuit breakers, motors, heating units, conduit systems, or other transmission equipment; working from blueprints, drawings, layouts, or other specifications, locating and diagnosing trouble in the electrical system or equipment, working standard computations relating to load requirements of wiring or electrical equipment, and using measuring and testing instruments. The Electrician facilitates and participates in outages. Pay Rate: $39.17/hourly 1st Shift 6:00 am-2:30 pm 1st Shift 6:00 am-4:30 pm 2nd Shift 2:00 pm-12:30 am 3rd Shift 8:00 pm-6:30 am Work Model: Onsite Responsibilities Essential Duties & Job Functions: * Perform electrical maintenance at operating voltages less than 600 volts. * Interpret wiring diagrams in order to locate failures. * Troubleshoot and identify root causes of various types of electrical failures. * Plan and layout work from blueprints, drawings, models, and verbal and written instructions. * Identify and document any field alterations, as needed. * Plan, organize work, and meet all deadlines. * Coordinate with other trade and warehouse personnel in the identification of proper and correct materials, parts assemblies and requirements for a variety of requisitions necessary for the job/task. * Submit requests and participate in outages. * Respond to emergency site maintenance. * Perform on call and preventive maintenance duties as necessary. * Participate in periodic stock inventories and prepare material requisitions for replacement items. * Facilitate third party vendors related to electrical tasks. * Safety operate customer and company vehicles and equipment. * Perform various lower classified duties such as (but not limited to) file maintenance, workspace cleanup, maintain warehouse space and telephone answering as required. * Support other department staff as needed or directed. * Assist other trade groups in daily operations where required. * Adhere to the established company safety, personnel policies and standard operating procedures. * Performs other duties as assigned including supporting CMMS and other departments. Job Requirements Mandatory: * High school graduate or equivalent GED. * Five (5) years' experience in the commercial electrical service and maintenance trade. * Electrician license in good standing. * Medically and physically able to wear a respirator. * Able to pass pre-hire background and drug screen. * U.S. Citizenship. * Ability to obtain and maintain the required intelligence community level clearance. * Valid Drivers' license with an acceptable driving record. * Ability to lift 50 pounds and team lift 75 pounds. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email ****************** Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

Job Description $80K-$120K+ | Year-Round Work | No Layoffs Michael & Son Services (est. 1976) is hiring experienced residential service electricians in Your area. We offer steady work, strong support, and real earning potential for techs who take pride in doing the job right. What You'll Do: ● Diagnose and repair residential electrical issues ● Install and upgrade electrical systems to code ● Present clear options so homeowners can make informed decisions ● Run professional service calls with company support ● Use tablet-based, paperless job documentation What We're Looking For: ● 2+ years residential service experience ● Strong troubleshooting skills ● Professional communication with homeowners ● Valid driver's license Journeyman or Master license a plus What We Offer: ● $80,000-$120,000+ earning potential (top performers earn more) ● Steady, year-round work - no slow seasons ● Fully stocked company truck + gas card ● Dispatch from home ● Medical, dental, vision, 401(k), PTO, Uniform laundry services ● Ongoing training and advancement opportunities Why Michael & Son is the place for You? ● No Sitting at Home Waiting For That Phone Call ● Real pay, no gimmicks ● Strong brand and customer Loyalty ● Company that supports its technicians Apply today. Interviews happening now. #ZR

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

JOB FUNCTION: Install, maintain, test, startup, and adjust a wide variety of electrical, electronic, electropneumatic, and electro-mechanical instrumentation and control systems/equipment. specific electrical and controls (E&C) systems include, but are not limited to, those associated with the electrical distribution system, turbine generators, chillers, boilers, incinerators, and HVAC equipment. MAJOR DUTIES AND RESPONSIBILITIES: Read, interpret, and troubleshoot site E&C system deficiencies using electrical schematics, loop diagrams, control logics, mechanical drawings, and piping & instrument diagrams (P&IDs). Troubleshoot indiscriminately both the mechanical and electrical sides of systems. Maintain as-built logics, control loop diagrams, and documentation for all assigned systems. Install, program, troubleshoot, calibrate, tune, preventive and predictive maintenance (condition monitoring), replace and repair all assigned E&C systems and all associated electrical, electronic, electropneumatic, and electro-mechanical components, including instrumentation and end-elements. Troubleshoot hardware and software problems; perform simple programming, data base changes, and alarm log reviews; perform and maintain system back-ups and history database files; develop and install graphics to enhance operation and maintenance; and perform miscellaneous administrative functions as directed by E&C Engineer on site's microprocessor-based central control systems. Program and troubleshoot ladder logic, both in hard-wired relays and PLC, for control systems. Adjust control system parameters as required and/or directed by E&C Engineer. Perform startup and checkout of newly installed E&C systems prior to operations turnover. Complete ADC's as required. Direct repair personnel as assigned. Provide technical support as required to the E&C Engineer in the performance of his/her duties. Perform all other duties as assigned. REQUIRED QUALIFICATIONS: Journeyman Electrical License. Working experience in electrical, industrial electronics, and electro-pneumatics. Ability to read, interpret, and troubleshoot using electrical schematics, loop diagrams, control logics, mechanical drawings, and piping & instrument diagrams (P&ID's). Five years working experience with 120VAC. Working knowledge of PLC programming. Must be able to read, interpret, and troubleshoot ladder logic from computer terminal. Knowledgeable in direct digital control (DDC) and other forms of electronic controls. Hands-on experience in calibration and maintenance of electronic and / or electro-pneumatic control system equipment. Hands-on experience in repair and troubleshooting of motor control centers and variable frequency drives (VFD's). Ability to quickly learn operating and control systems for principal site-specific systems including, but not limited to, the electrical distribution system, turbine generators, chillers, boilers, incinerators, and HVAC equipment. Ability to comprehend written and oral instructions. A willingness to work rotational shift if necessary, including days, evenings, and nights, as well as, overtime, on-call, call-ins, weekends, and holidays. EXPERIENCE: Two years' experience in maintenance and repair on commercial/industrial/residential building equipment to include, but not limited to: cooling towers, pumps, heat exchangers. Two years working experience with high voltage up to 15,000VAC, preferred. EDUCATION: High school, technical school, apprenticeship, trade school graduate or equivalent required. PREFERRED QUALIFICATIONS: Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Understanding of Distributed Control Systems (DCS) and SCADA, preferred. Understanding of HVAC building management systems (BMS), preferred. NFPA-70E Training. OSHA 10 Training. CPR Training. Certified and proficient in Foxboro computer systems to include hands-on and / or classroom experience, preferred. SECURITY: Must be a U.S. Citizen, able to obtain and maintain a Top-Secret Security Clearance. PHYSICAL DEMANDS: Incumbents may work in conditions that require operating industrial machinery/power tools and motor vehicles. Additionally, incumbents may participate in work that requires walking, bending, squatting, and carrying materials throughout the facility. Workplace conditions necessitate following strict safety guidelines and the use of Personal Protective Equipment. Work tasks requiring the incumbent to lift weight more than 50 pounds requires two or more persons. The physical demands described here are representative of those that an employee may perform on an occasional to regular basis while performing functions of this job. The work environment characteristics describe here are representative of those an employee may encounter on an occasional to regular basis while performing the functions of this job. Reasonable accommodations may be made to enable individuals to perform these functions. The Government has full and complete control over granting, denying, withholding, or terminating security clearances for Contractor employees. Decisions on clearance requirements for positions will ultimately be decided by the customer based on access and requirements. It is the responsibility of the Contractor to ensure these decisions are approved and executed based on the customers guidance. NOTE: The job description is not intended to be all-inclusive. Employees may be assigned other job-related Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Founded in 1989, SOSi is among the largest private, founder-owned technology and services integrators in the defense and government services industry. We deliver tailored solutions, tested leadership, and trusted results to enable national security missions worldwide. Job Description Overview *** This position is contingent upon contract award *** SOS International LLC (SOSi) is seeking an Electrician Control Technician to provide support for a Facilities and Life Support Contract at an overseas location. Essential Job Duties Thorough working knowledge of AC/DC Electronic theory and solid-state electronics, DDC controls, and computer operations. Familiar with Honeywell, Powers, and Carrier Building Management Systems or similar systems. Qualifications Minimum Requirements Active in scope Secret security clearance. High school (or GED equivalent), technical or trade school graduate or equivalent apprenticeship for the mechanical trades. Five (5) years of experience in maintenance and repair of pneumatic and electronic controls and in qualifications listed above. Additional Information Work Environment Must reside at an overseas location. Long hours, exposure to harsh weather and other hazardous conditions. Wearing of location appropriate PPE and clothing when in the field is required. A willingness to work rotational shift if necessary, including days, evenings, and nights as well. Working at SOSi All interested individuals will receive consideration and will not be discriminated against for any reason.

Lead Electrical Maintenance Technician on-site coordinator and crew supervisor for all electrical work. Coordinates the scheduling and execution of Preventative and Predictive Maintenance, Corrective Maintenance and Warranty work. The Lead Electrical Maintenance Technician will split their time between administrative efforts planning, scheduling and documenting the work and field time with the crew performing the work. They will act as the first line of supervision to the electrical crews. Responsibilities Works with Electrical Maintenance Technicians to ensure Electrical maintenance is completed safely, on schedule and within equipment manufacturer's recommendations. Duties include: Installation, maintenance, testing, calibration and commissioning of electrical systems and components. Act as “Employee in Charge” on some jobs, ensuring that jobs are efficiently planned and safely completed. Perform other assignments as required. Some supervision required. Read and interpret one line drawing, schematics drawings and other service documents, including manufacturer's instructions and manuals. Responsible for maintaining personal protective equipment (PPE), hand tools and test equipment. Responsible for personal safety and the safety of others in your assigned work area by ensuring understanding and compliance with safety policies, practices and procedures. Ability to identify and wear appropriate PPE as required by the task being performed. Ability to understand and adhere to strict Standard Operating Procedures and Switching Plans. Requires troubleshooting capabilities, to include the digital multi-meters, clamp on ammeters, power quality meters, infrared scanners, circuit tracers Simple protective relay calibration and commissioning. Perform point to point verification of control wiring. Perform equipment switching, isolation, LOTO, zero volt check and grounding. Perform maintenance, tests and inspections on the following equipment: high voltage SF6 circuit breakers, medium voltage vacuum circuit breakers, low voltage power circuit breakers, switchboards, panel boards, ground systems, motor starters, variable frequency drive's, low and medium voltage cables, low, medium and high voltage switches, ground fault systems, isolation transformers, two-winding transformers, power transformers, instrument transformers, automatic transfer switches, static transfer switches, sectionalizing switches, batteries, and all equipment associated with low and medium voltage substation and switchgear systems. Working knowledge of NETA MTS testing specifications Accurately record field data for all tests and inspections utilizing Power DB and Maximo. Assist with start-up services on switchgear and electrical systems up through 138 kV. Conduct safety meetings as required. Ensure compliance with Dean Fluor environmental and safety policies. Maintain strong team and client relationships. Qualifications Must be capable of achieving and maintaining TS security clearance. High school diploma or GED coupled with Electrical Journeyman license or a Technical Degree\Certificate in a related field i.e. AS in Electrical\Electronics, Instrumentation, Controls or NETA Level II or NICET Level II in Electrical Power Testing: A minimum of 10 years experience in facilities maintenance with thorough understanding of electrical systems, controls, generators, and life safety systems, preferred five years related experience in data center or complex mission critical environments. Demonstrated leadership skills with the ability to efficiently schedule and execute work in a dynamic environment with large numbers of equipment. Proficiency in reading and interpreting complex technical instructions, plans blueprints, and schematic diagrams. Strong working knowledge of NEC, NFPA 70E, NETA maintenance practices, maintenance and supply procedures, and quality control procedures. Demonstrated ability to evaluate complex electrical systems, perform damage assessments, estimate maintenance, parts, and manpower requirements, diagnose malfunctions, and employ testing and inspection techniques Ability to organize and prioritize workload with minimal supervision Ability to work in confined spaces and on ladders, and to lift equipment over six feet above ground Must conform to all city, state and federal licensing and certification requirements. Lifting and physical exertion required Perform other related duties as requested. Abilities Lifts at least 100 pounds at one time and 60 pounds for an extended period of time. Relocates a 12 foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences.

Loudoun County Government has been named one of Forbes' 2025 Best Large Employers! We're proud to be recognized nationally for our commitment to employee satisfaction and excellence in public service. At Loudoun County, we bring together talented professionals from all backgrounds to make a meaningful impact in a dynamic, growing community - that's The Loudoun Difference . Welcome and thank you for your interest in employment with Loudoun County Government! ALL SECTIONS OF THE APPLICATION MUST BE COMPLETED IN ITS ENTIRETY. THE RESUME IS CONSIDERED SUPPLEMENTAL INFORMATION ONLY. APPLICATIONS THAT ARE INCOMPLETE OR INDICATE 'SEE RESUME' WILL NOT BE TAKEN INTO CONSIDERATION. Job Summary The Department of General Services is seeking qualified applicants for Systems Maintenance Technician I positions within the Facilities Support Division. The successful candidate will work closely with technicians or crew chiefs and will: * Assist by having materials, tools, and equipment ready as repairs progress * Assist with demobilization and cleanup when repairs are completed * Respond promptly and directly to work requests * Diagnose, initiate, and complete minor mechanical, electrical, and plumbing repairs in County Government facilities * Receive and close out work requests by computer and/or hand-held electronic device * Inspect facilities and report HVAC, plumbing, and electrical problems or unsafe conditions * Keep vehicles fully stocked with appropriate tools and materials * Must provide superior customer service at all times Hiring salary is commensurate with experience. Minimum Qualifications High school diploma or equivalent; one (1) year of related work experience in HVAC, electrical, plumbing, mechanical, automotive, and/or security system trades; or equivalent combination of education and experience. Job Contingencies and Special Requirements Successful candidates will undergo pre-employment criminal, credit, and DMV record background checks, to include Criminal Justice Information Systems (CJIS) fingerprinting. Valid driver's license and good driving record are required (driving records may be reviewed annually for continued qualification). Hold or obtain CFC license within six (6) months of hire. Must be able to work in extreme temperatures and lift up to 70 lbs. Some work may be hazardous due to location or type of work. Subject to recall or being held beyond scheduled workday. Must be available to respond to County emergencies (24/7) as directed in accordance with Department policy and written or verbal directive.

$80K-$120K+ | Year-Round Work | No Layoffs Michael & Son Services (est. 1976) is hiring experienced residential service electricians in Your area. We offer steady work, strong support, and real earning potential for techs who take pride in doing the job right. What You'll Do: ● Diagnose and repair residential electrical issues ● Install and upgrade electrical systems to code ● Present clear options so homeowners can make informed decisions ● Run professional service calls with company support ● Use tablet-based, paperless job documentation What We're Looking For: ● 2+ years residential service experience ● Strong troubleshooting skills ● Professional communication with homeowners ● Valid driver's license Journeyman or Master license a plus What We Offer: ● $80,000-$120,000+ earning potential (top performers earn more) ● Steady, year-round work - no slow seasons ● Fully stocked company truck + gas card ● Dispatch from home ● Medical, dental, vision, 401(k), PTO, Uniform laundry services ● Ongoing training and advancement opportunities Why Michael & Son is the place for You? ● No Sitting at Home Waiting For That Phone Call ● Real pay, no gimmicks ● Strong brand and customer Loyalty ● Company that supports its technicians Apply today. Interviews happening now. #ZR

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

Dean|Fluor is looking for an Electrical Maintenance Technician. Our Electrical Maintenance Technician Job activities include installation, maintenance, testing, calibration and commissioning of electrical systems and components. Electrical Maintenance Technicians will work on low, medium and high voltage systems to ensure electrical maintenance is completed safely, on schedule and within equipment manufacturer's recommendations. Responsibilities Installation, maintenance, testing, calibration and commissioning of electrical systems and components. Act as “Employee in Charge” on some jobs, ensuring that jobs are efficiently planned and safely completed. Perform other assignments as required. Some supervision required. Read and interpret one line drawing, schematics drawings and other service documents, including manufacturer's instructions and manuals. Responsible for maintaining personal support equipment, PPE, hand tools and test equipment. Responsible for personal safety and the safety of others in your assigned work area by ensuring understanding and compliance with safety policies, practices and procedures. Ability to identify and wear appropriate PPE as required by the task being performed. Ability to understand and adhere to strict Standard Operating Procedures and Switching Plans. Requires troubleshooting capabilities, to include the digital multi-meters, clamp on ammeters, power quality meters, infrared scanners, circuit tracers Simple protective relay calibration and commissioning. Perform point to point verification of control wiring. Perform equipment switching, isolation, LOTO, zero volt check and grounding. Perform maintenance, tests and inspections on the following equipment: high voltage SF6 circuit breakers, medium voltage vacuum circuit breakers, low voltage power circuit breakers, switchboards, panel boards, ground systems, motor starters, variable frequency drive's, low and medium voltage cables, low, medium and high voltage switches, ground fault systems, isolation transformers, two-winding transformers, power transformers, instrument transformers, automatic transfer switches, static transfer switches, sectionalized switches, batteries, and all equipment associated with low and medium voltage substation and switchgear systems. Working knowledge of NETA MTS testing specifications Accurately record field data for all tests and inspections utilizing Power DB and Maximo. Assist with start-up services on switchgear and electrical systems up through 138 kV. Conduct safety meetings as required. Ensure compliance with Dean Fluor environmental and safety policies. Maintain strong team and client relationships. Qualifications High school diploma or GED coupled with A minimum of 10 years of progressive and hands-on experience in an environment of similar proportions and mission as the assigned area of responsibility. Demonstrated leadership skills with the ability to efficiently schedule and execute work in a dynamic environment with large numbers of equipment. Proficiency in reading and interpreting complex technical instructions, plans blueprints, and schematic diagrams. Strong working knowledge of NEC, NFPA 70E, NETA maintenance practices, maintenance and supply procedures, and quality control procedures. Demonstrated ability to evaluate complex electrical systems, perform damage assessments, estimate maintenance, parts, and manpower requirements, diagnose malfunctions, and employ testing and inspection techniques. A minimum of five years' experience in facilities maintenance with thorough understanding of electrical systems, controls, generators, and life safety systems, including five years related experience in data center or complex mission critical environments Ability to organize and prioritize workload with minimal supervision Ability to work in confined spaces and on ladders, and to lift equipment over six feet above ground Must conform to all city, state and federal licensing and certification requirements. Possess an active License (determined by the location of services) Lifting and physical exertion required Perform other related duties as requested Must be capable of achieving and maintaining security clearance Abilities Lifts at least 100 pounds at one time and 60 pounds for an extended period of time. Relocates a 12-foot stepladder without assistance. Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders. Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis. Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English. May use a standard ladder without exceeding the weight limit while carrying tools. Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Apply general rules to specific problems to produce answers that make sense. Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events). See details at close range (within a few feet of the observer). Listen to and understand information and ideas presented through spoken words and sentences.

Amentum is seeking an Electrical Control Technician for multiple OCONUS locations contingent upon award. The Electrical Control Technician is responsible for maintaining, repairing, and troubleshooting electrical control systems within a facility. This role ensures that all systems operate efficiently and safely, contributing to the overall operation of building management systems. The position requires collaboration with other technicians and departments to support seamless operations and address any technical challenges that arise. Essential Responsibilities * Perform regular maintenance on pneumatic and electronic controls to ensure optimal performance. * Troubleshoot and repair any issues with AC/DC electronic systems, solid-state electronics, and DDC controls. * Operate and maintain Honeywell, Powers, and Carrier Building Management Systems or similar systems. * Collaborate with other technicians and departments to resolve complex technical issues. * Document all maintenance and repair activities thoroughly and accurately. * Ensure all work complies with safety standards and regulations. * Be available for rotational shift work, including days, evenings, nights, weekends, and holidays, as required. Minimum Position Knowledge, Skills, and Abilities Required * High school diploma or GED equivalent, with technical or trade school graduation or equivalent apprenticeship in mechanical trades. * Thorough working knowledge of AC/DC electronic theory, solid-state electronics, DDC controls, and computer operations. * Familiarity with Honeywell, Powers, and Carrier Building Management Systems or similar systems. * At least five years of experience in maintenance and repair of pneumatic and electronic controls. * Ability to work effectively in both independent and team settings. * Strong problem-solving skills and attention to detail. * Willingness to work varied shifts, including overtime, weekends, and holidays as necessary. * Must possess a SECRET security clearance at the start of the contract and be able to obtain the appropriate clearance within eight months. Work Environment, Physical Demands, and Mental Demands * The position involves working in a variety of environments, which may include exposure to noise, dust, and varying temperatures. * Physical demands include standing, walking, bending, and lifting equipment or tools up to 50 pounds. * Mental demands include the ability to remain focused and attentive to detail while managing multiple tasks and troubleshooting complex issues. * The technician must be able to adapt to changing priorities and work under pressure to meet deadlines. * Other Responsibilities: Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams. Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Loudoun County Government has been named one of Forbes' 2025 Best Large Employers! We're proud to be recognized nationally for our commitment to employee satisfaction and excellence in public service. At Loudoun County, we bring together talented professionals from all backgrounds to make a meaningful impact in a dynamic, growing community - that's The Loudoun Difference . Welcome and thank you for your interest in employment with Loudoun County Government! ALL SECTIONS OF THE APPLICATION MUST BE COMPLETED IN ITS ENTIRETY. THE RESUME IS CONSIDERED SUPPLEMENTAL INFORMATION ONLY. APPLICATIONS THAT ARE INCOMPLETE OR INDICATE 'SEE RESUME' WILL NOT BE TAKEN INTO CONSIDERATION. Introduction Salary offers are based on information contained within the application and any attachments (licenses, certifications, etc.). Please ensure your profile and resume are up to date with all experience, education, and skills you wish to be considered. Loudoun County Parks, Recreation & Community Services (PRCS) is dedicated to connecting all communities through exceptional people, parks, and programs. Our goal is to make Loudoun the community of choice through outstanding experiences while promoting diversity, equity, inclusion, and accessibility. We collaborate to deliver programs and community services that provide social, personal, economic, and environmental benefits to last a lifetime. Come be a part of something that matters! Job Summary Loudoun County's Department of Parks, Recreation, and Community Services is seeking qualified candidates for the Trails Maintenance Technician position. Under the overall guidance of the assigned supervisor, manages the daily maintenance and operational tasks conducted on trails maintained by the County Department of Parks, Recreation, and Community Services. This role offers on-site maintenance for trail construction, operations, and related projects. We are currently hiring for the following location(s): * PRCS, 742 Miller Drive SE, Leesburg, VA Responsibilities include, but are not limited to: * Administers the everyday maintenance and operational duties carried out on trails * Oversees the routine upkeep of trails. * Handles machinery, equipment, vehicles, and tools. * May carry out additional critical job responsibilities pertinent to the specific role and departmental assignment. Minimum Qualifications High school diploma or equivalent; two (2) years of related work experience in grounds maintenance and/or basic general maintenance preferably inclusive of some level of performance in a work leader capacity; or equivalent combination of education and experience. Preferred Qualifications: * Coursework in building trades. * Three (3) years of applicable work experience in trail construction. * A Commercial Pesticide Applicator's/Fertilizer Applicator License. Job Contingencies and Special Requirements Must undergo pre-employment criminal and DMV background checks. Valid driver's license and good driving record (driving records may be reviewed annually for continued qualification). Obtain First Aid/CPR certifications within 6 months of hire. County supervisory, e-learning, and MOAT trainings as required.