Maintenance electrician jobs in Burnsville, MN

. Pay Rate: $23.50 an hour with an additional $2.00 an hour shift differential for swing and grave shift ESSENTIAL DUTIES AND RESPONSIBILITIES Maintain a neat and clean appearance for the entire property Empty outdoor trash cans and ashtrays Remove trash from parking lots and sidewalks Maintain and inspect interior and exterior of all buildings Maintain grounds including, but not limited to, mowing, sweeping, raking and laying sod Perform snow shoveling, plowing and removal Complete work orders in a timely manner Move office equipment and furniture as requested Maintain all tools and equipment Perform light carpentry and plumbing repairs Perform Event Center air wall and bleacher setup and maintenance KNOWLEDGE AND CERTIFICATION, SKILLS AND ABILITIES Knowledge and Certification Required: Previous experience in the safe use and operation of power and hand tools and the like Valid driver's license Previous experience in lawn maintenance, snow removal and the like Skills Required: Accurate and detail-oriented Highly organized and ability to adapt quickly to changing priorities Ability to use hand and power tools in a safe manner Light carpentry skills Strong mechanical aptitude Proven knowledge of heating/cooling systems and water treatment Abilities Required: Ability to work fast and efficiently Ability to independently complete multiple tasks in a professional manner Ability to troubleshoot, maintain and repair specialized equipment Ability to maintain high confidentiality Ability to interact with guests, coworkers and management in a professional and courteous manner Ability to follow established dress code policies and practice good personal hygiene REQUIRED TRAINING Treasure Island guest service training Bloodborne Pathogens training Any position-related training as determined by department manager Ability to obtain CPO Certification PHYSICAL DEMANDS Must be able to walk and/or stand for long periods of time Must have a good sense of balance, and be able to bend and kneel Must be able to push, pull and grasp objects regularly Must be able to climb a ladder Must be able to independently lift 25+ pounds routinely Must have manual dexterity necessary to manipulate tools and equipment Must have good eye hand coordination Must be able to operate foot pedals WORKING ENVIRONMENT Work is performed throughout the entire property (inside and outdoors) and may include excessive noise, such as power tools, dust and fumes from paints, varnishes, stains and the like, flashing lights, frequent loud noises and cigarette smoke Required to work in extreme weather such as wet, damp, high wind, ice and snow Must be able to work in cramped, tight quarters Occasionally overtime may be required Must be willing to work a flexible schedule including all shifts, weekends and holidays

We are seeking a skilled and dedicated Maintenance Technician to join our team. The ideal candidate will possess strong mechanical knowledge and experience in facilities maintenance, ensuring that all equipment and systems are functioning efficiently. This role requires a proactive approach to problem-solving, excellent customer service skills, and the ability to work independently as well as part of a team. Duties Perform routine maintenance and repairs on various equipment and systems, including mechanical, electrical, and plumbing. Utilize tools such as an ohmmeter for troubleshooting electrical issues. Maintain accurate records of maintenance activities using Computerized Maintenance Management Systems (CMMS). Supervise and lead maintenance projects, ensuring tasks are completed on time and to standard. Collaborate with other departments to address facility-related concerns and improve overall operations. Respond promptly to maintenance requests from staff and ensure customer service excellence. Conduct inspections of facilities and equipment to identify potential issues before they become major problems. Assist in the training of new maintenance staff as needed. Requirements Proven experience in facilities maintenance or a related field. Strong mechanical knowledge with the ability to troubleshoot various systems. Familiarity with logic controllers is preferred. Excellent leadership skills with the ability to supervise effectively. Strong customer service orientation with good communication skills in English. Ability to work independently and manage multiple tasks simultaneously. A valid driver's license may be required for certain positions. If you are passionate about maintaining high standards in facility operations and have the skills we are looking for, we encourage you to apply for this exciting opportunity as a Maintenance Technician. All shifts are available.

Maintenance Technician First Shift Hours: Monday-Friday 7am-3pm Compensation: $28-$32 per hour About The Job: Lakeside HR Group has been engaged by our client to recruit for a Maintenance Technician to join their manufacturing team. Our client is a leading North American manufacturer of high-quality, durable industrial and storage products used across a variety of industries. They are known for their strong company culture, focus on safety, and dedication to innovation and continuous improvement. If you're a hands-on problem solver who enjoys keeping machines running smoothly and takes pride in maintaining a safe, efficient production environment, this could be a great opportunity for you. You'll join a team that values collaboration, reliability, and craftsmanship in everything they do. Key Responsibilities: Perform preventive maintenance on electrical, mechanical, and industrial equipment. Troubleshoot and repair production equipment such as control panels, compressors, ovens, bearings, drives, and HVAC units. Weld, cut, and grind metal for mold and machine repairs. Build and remodel equipment for manufacturing operations. Maintain accurate maintenance documentation and requisitions. Ensure a safe work environment by following company and OSHA safety guidelines. Support operational teams with technical assistance and problem-solving. Perform additional maintenance and repair tasks as assigned by management. Required Skills: 2+ years of industrial maintenance experience (education or equivalent training considered). Associate's degree in Electrical or Mechanical Maintenance preferred. Journeyman's card in Electrical or Mechanical trades a plus. Experience with rotational molding or plastics manufacturing a plus. Manufacturing experience strongly preferred. Forklift and scissor lift certification required. Strong troubleshooting, mechanical, and electrical aptitude. Ability to lift up to 50 lbs and work in hot, humid environments. Benefits: Competitive pay and comprehensive health benefits 401(k) with company match Paid time off and holidays Opportunities for advancement within a growing organization Supportive, team-oriented culture focused on safety and quality About Lakeside HR Group: At Lakeside HR Group, we understand that finding the right job is essential for your career success. We are a boutique-style human resources consulting and recruiting firm dedicated to providing personalized, tailored solutions. When you partner with us, you are not just getting a recruiter; you are getting the entire Lakeside team working together to support your career goals. Partner with us at Lakeside HR Group, where we are more than just a recruiting firm; we are your partners in achieving your career aspirations.

Job Description Johnson Screens - A brand of Aqseptence Johnson Screens is the leading global provider of innovative screening and separation solutions. We support a wide range of industries, which means that almost every product around us has touched one of our screens during its manufacturing process. Since our inception over a century ago, our products have helped protect lives by reducing harmful waste, providing clean water, and making the best use of our precious natural resources. We strive to be a great place to work and do what is right for our customers and our people. We thrive on innovation and continuous improvement and we believe that our people are the key for our success. Basic FunctionDetermine and perform mechanical and electrical repair on all equipment. General plant maintenance of equipment, building, and grounds. Code, test, debug, and document results. Install new programs and change existing programs.Duties & Responsibilities Interpret and use schematics, drawings, and instruction manuals dealing with electricity, electronics, and programmable logic controls, including CNC/NC machines. Repair machinery in the manufacturing plant. Write or revise appropriate documentation in accordance with current standards. Keep systems up to code. Install new circuits as needed. Design and layout basic circuits. Provide services to group for special assignments, working individually or within a team project. Assist in making evaluations and recommendations. Suggest improvements of issues within current processes. Work with minimal supervision. Possess excellent trouble-shooting skills to detect if problem is electrical or mechanical. Travel to other facilities to assist in upgrades or repairs. Capable of requisitioning materials to complete repairs. Maintain and repair electrical and mechanical equipment. Lead special projects Understand and comply with all HSE, Compliance and other Company Policies. Must know Quality Policy and comply with all requirements of the Quality System Manual, Operating and technical procedures and work instructions as it applies to the position. Perform various other duties as assigned by Supervisor/Manager within the physical constraints of the position. Required Skills 5 years plus directly related experience. Maintenance or Journeyman Electricians license for State of Minnesota Ability to read blue prints and electrical schematics. Able to work closely with fellow employees. Basic troubleshooting techniques. Benefits Employer Sponsored: Medical/Dental/Vision - Family Coverage Available Safe Harbor 401(k) - 5% Employer Match Optional Legal Plan Employer Paid: 10 Paid Holidays per Year Sick Time & Vacation Time Short & Long Term Disability Insurance Group Term Life Insurance - Additional Coverage Available Critical Illness Insurance Employee Assistance Program (EAP) Tuition Reimbursement Student Scholarships Join our team today! Careers start here. Aqseptence Group, Inc. is an equal opportunity employer: Veterans, Disabled, Minorities and Women.

Veolia is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Water Tech brings together a dedicated team of experienced professionals committed to tackling the world's most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description We are seeking an experienced, licensed in the State of Minnesota, journeyman electrician to join our expanding industrial electrical team. The journeyman electrician is responsible for maintaining, troubleshooting, repairing, wiring, and installing electrical related components and fixtures for complex industrial machines and our Minnetonka manufacturing facility in accordance with relevant safety codes and safety procedures. Duties & Responsibilities ● Diagnose, troubleshoot, and repair all electrical related assets and complex industrial machines within the plant (including but not limited to machines, light fixtures, and phone lines) using hand and power tools (including but not limited to wrenches, voltmeter, and electric drivers). ● Read wiring diagrams in order to wire or rewire electrical components (including but not limited to PLCs, breakers, and switches) to machines and parts. ● Perform preventative maintenance on all electrical related assets within the plant at scheduled times by rewiring, replacing electrical parts, testing for proper function, and working with operators. ● Program various components including but not limited to PLCs, ladder logic, and control circuits to change or update functionality on machines. ● Wire, install electrical components, program, and test new machines using hand and power tools (including but not limited to wrenches, voltmeter, and electric drivers). ● Upgrade existing machines by installing electrical components, programming existing machines, and testing functionality using hand a power tools (including but not limited to wrenches, voltmeter, and electric drivers). ● Climb, crawl, and maneuver into various awkward or difficult to reach areas in order to wire parts, replace parts, or preform preventative maintenance on machines. ● Organize and clean the work area by removing trash, sweeping, and returning tools and equipment to the proper location. ● Prepare electrical maintenance reports regarding work performed and document in a proprietary computer software system. ● Operate machinery including but not limited to booms, scissor lifts, and fork trucks. ● Design blueprints, schematics, and wiring diagrams for new equipment or equipment upgrades. ● Communicate with team members and various other departments to provide recommendations, maintain work continuity, and provide assistance as necessary. ● Bend, pull, and install conduit and associated wiring throughout the entire manufacturing plant. Knowledge, Skills & Abilities ● Knowledge of the EHS life critical systems and the lock out tag out safety system. ● Knowledge of basic computer functions and usage. ● Knowledge of mechanical and electrical comprehension including but not limited to pneumatics, hydraulics, and brakes. ● Knowledge of PLC, ladder logic, control circuits, Motors and process instrumentation function, installation, and repair. ● Ability to read and interpret blueprints or wiring diagrams in order to assemble electrical equipment and repair components. ● Ability to interpret measurements from calibers, rulers, and other measuring instruments. Compensation - The salary range is tied to the market for similarly benchmarked roles. The range is not an absolute, but a guide, and offers will be based on the individual candidate's knowledge, skills, experience, and market conditions, as well as internal peer equity. Depending upon all the preceding considerations for the final selected individual candidate, the offer may be lower or higher than the stated range: $32-$36/hour USD This shift can be Wednesday through Sunday OR Thursday through Monday - the working hours will be 2pm to 10pm- there is a .75 cent shift differential as well as a $1 per hour adder for working both weekend days. Qualifications Education & Experience ● Minimum of 3 years of commercial/industrial electrical experience. Required: ● Licensed electrician in the State of Minnesota. Additional Information As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Job Description Edison Electric, Inc. in Minneapolis, MN needs your help! Our dedicated team is hiring a seasoned electrical professional to serve our clients as a full-time Residential Service Electrician. Complete impressive hands-on work that makes a lasting impact and furthers our reputation for excellence. Keep reading to learn just a few of the many perks of joining us! WHAT YOU GET: PAY & BENEFITS We value your experience, and with our innovative new comp structure, our Residential Service Electrician can earn $85,000 to $135,000/year. You can dispatch from home to start your day immediately. However, you can restock your vehicle at our office if you need supplies! We also have an incredible benefits package with perks like: Health, dental, and vision Paid time off (PTO) 401(k) with company match Short- and long-term disability Bonus structure Company parties Company vehicle Education assistance Growth opportunities Life insurance Mentor/apprentice program Uniforms This isn't a career opportunity you want to miss out on. Apply now! YOUR ROLE Every day as our Residential Service Electrician is a little different as you travel to our customers' homes and perform a wide range of services to get their systems in perfect working condition. From troubleshooting issues to completing installations and repairs, you use your expertise to ensure homes are safe, efficient, and up to code. You work closely with homeowners to make recommendations that enhance safety and peace of mind. RESIDENTIAL SERVICE ELECTRICIAN QUALIFICATIONS Our ideal candidate has residential service experience and is skilled with customer service. Here are the minimum requirements: Journeyman license 2+ years of electrical experience Ability to work independently with minimal supervision Interest and belief in the electrical code Ability to make home safety recommendations based on the electrical code Strong technical aptitude YOUR HOURS You typically work Monday through Friday, 7:00 am to 4:00 pm with some variation depending on the job. Our service area covers a 30-mile radius around Minneapolis/Saint Paul. LEARN ABOUT EDISON ELECTRIC Since 2007, we've proudly served the Twin Cities as a locally owned, independent company, and we treat our team like family. Our culture is centered on valuing and supporting each member of our team. We're committed to providing a workplace where everyone can thrive both professionally and personally. Don't just take our word for it-visit our careers page to hear directly from our employees through their testimonials. They share firsthand how we prioritize work-life balance, ensuring they have time for family events and personal commitments. If you're looking for a company that truly values and invests in its people, join us! Bright futures and rewarding careers begin at Edison Electric! Seize this incredible opportunity by filling out our initial application today! Must have the ability to pass a background check and drug screening test. Job Posted by ApplicantPro

We area a family owned, residential Heating, Cooling, Plumbing, and Electrical company that's been in business since 1945. Due to growth, our main office just relocated to a larger building in Rosemount, MN. Our company has grown 19% within the last year to now 80 employees, and the demand is not stopping anytime soon! We have immediate openings on our electrical service team! If you're motivated, have at least 2 years of electrical experience, mechanical ability, and great customer service skills we encourage you to apply. Because we offer state of the art customer experiences, we need top of the line Electricians who genuinely care about the customer and are not looking for just a job, but a career. We have food trucks, catered breakfasts, golf outings, annual Christmas parties, and lots of friendly competitions throughout the year! Benefits: Top pay Health Benefits Vision and dental packages 401(k) with company match Paid vacation Paid holidays Company vehicle Cell phone I-pad *Must be able to pass a pre-employment drug screen and background check* *Great suburban territory, we do not service St. Paul or Minneapolis* Compensation: $100,000.00 - $150,000.00 per year Join the Mister Sparky Team! We want to make joining our team as easy as possible. Our team members are the most valuable assets in our organization. It's true, our employees come first! How do we prove it? First things first. Pay- We believe the best performers deserve the best pay. That's why we want to pay YOU the best competitive rate. Flexibility- We want YOU to have time for the most important things in your life. Our scheduling is flexible. Find out how we do it. Career Path- We offer you an unlimited future with our world class training programs. Our training programs include Technical Training, Virtual technical training, communications, sales, and more! If you are serious about your career and want to learn from the best in the industry apply today! So, if you have a great attitude and a strong work ethic, and are someone who takes pride in the work you do, then we want to hear from you! Each franchise location is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. The franchisee sets their own compensation and benefits. All inquiries about employment, benefits, scheduling and compensation at this franchise should be made directly to the franchise location, and not to Mister Sparky Corporate.

Job Type:RegularThe Maintenance Technician II performs routine and break down maintenance on processing and packaging equipment, and is responsible for keeping the plant running and in compliance with all rules and regulations by using safe methods of equipment repair/upkeep. The Maintenance Technician II performs repairs as needed by the department, troubleshoots processes, manages and administers the preventive maintenance program, and assists with machine set ups and rebuilds as needed. Invest in you, Join Agropur as a Maintenance Technician in Le Sueur. We dairy you! The Maintenance Technician II performs routine and break down maintenance on processing and packaging equipment, and is responsible for keeping the plant running and in compliance with all rules and regulations by using safe methods of equipment repair/upkeep. The Maintenance Technician II performs repairs as needed by the department, troubleshoots processes, manages and administers the preventive maintenance program, and assists with machine set ups and rebuilds as needed. How Agropur invests in YOU: Starting Rate: $29.22 hourly Two pay increases within a year, up to $1.00 Schedule 2-2-3 6am to 6pm, double time pay on Sunday Medical, Dental, Vision, Life, Short and Long-term Disability Insurance 401(k) with up to 7% company contributions 3 Weeks PTO Paid holidays and 2 floating holidays Paid parental leave Advancement Opportunities Healthy work/life balance Essential Duties and Responsibilities: Efficiently perform regular and preventative maintenance related to the plant, equipment, and grounds in compliance with standard operating procedures, good manufacturing practices, and safety policies as enforced by OSHA. Provide emergency/unscheduled repairs of mechanical, electrical, pneumatic and hydraulic equipment during the production process as needed. Prepare and set up machinery for scheduled production runs. Effectively perform and assist in repair or updating and installation of equipment. Perform troubleshooting of equipment, including both electrical and mechanical systems. Complete and update work orders using in-house systems. Complete and maintain routine and preventive records and logs. Works closely with production to minimize downtime while maintaining quality. Perform buildings and grounds maintenance/up-keep as needed. Maintain a working knowledge of all plant area processes. Accurately read and interpret equipment manuals and work orders. Other Duties and Responsibilities: Perform work accurately, reliably, thoroughly, timely, and within safety guidelines. Understand and adhere to Good Manufacturing Practices. Safety Protocol Stop any observed unsafe acts and obey facility safety rules and procedures. Correct or report any observed safety hazards. Support safety policies and programs. This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities, as management may deem necessary from time to time. Qualifications: Education Required: High School Diploma or equivalent required. Technical school coursework/Degree in boiler (not LSC), welding, electrical, HVAC maintenance preferred. Experience Required: Minimum two (2) years of maintenance/repair experience in a manufacturing environment required. Mechanical and electrical aptitude required. Certification/Licensure Required: None Skills Required: Communicate effectively both verbally and in writing with managers and colleagues. Decisions administered soundly and consistently with policies and in compliance with appropriate laws and regulations. Accurately scopes out length and difficult of tasks and projects, sets objectives and goals, breaks down work into the process steps, develops schedules and assignments, anticipates and adjusts for problems or roadblocks, measures performance against goals, evaluates results. Able to follow written, verbal and/or diagrammatic instructions; solve practical problems; interpret verbal and written instructions; logical thinking to solve problems including abstract and concrete variables; address practical problems; comprehend most complex concepts. Able to exchange basic informational data (fill out forms/checklists, copy data from one record to another, etc.); interview to gather information; advise others on alternatives/options; coach and counsel others; read, understand and explain technical data. Ability to solve problems by adapting knowledge and experience. Ability to work with minimum supervision, adapt to a changing environment quickly, and think independently. Demonstrate functional and technical knowledge, ability to learn new skills quickly, and achieve a high level of accomplishment. Demonstrate attention to detail and accuracy in work. Basic math plus fractions, decimals and percentages, as well as algebraic calculations. Basic computer operational skills; able to input and retrieve computerized information. Strong interpersonal skills and ability to work effectively at all levels in a collaborative team environment. Results driven, bottom-line oriented, strive to exceed goals, and motivate self and others to achieve positive outcomes. Exhibit a professional manner in dealing with others and work to maintain constructive working relationships. AA/EEO - Minority/Female/Disability/Veteran/Sexual Orientation/Gender Identity Agropur welcomes people from all backgrounds and origins. We are proud to be an employer with a diverse community and are committed to providing a respectful and inclusive experience for all employees and applicants. We will work with candidates who request accommodation. Please note that an adequate knowledge of French is required for positions in Quebec. In this text, the use of the masculine gender to designate persons is intended only to lighten the text.

ABOUT CROWN: CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture, and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers, and consumers alike. With operations in 39 countries employing approximately 23,000 people and net sales of approximately $12 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated, and driven individuals. DIVISION OVERVIEW: Crown's Food Division is the number one manufacturer of food cans in the world. Our complete array of food packaging serves a variety of markets, including fruit, vegetables, dairy, fish, meat, ready meals, pet food, infant milk powder and other dry food products. We offer a wide selection of food cans from round to bowl as well as shaped cans. We truly focus on excellence. Here is your chance to join the Crown Food Team. LOCATION: Plant 84 is in Owatonna, MN. POSITION OVERVIEW: The Journeyman Electrician provides skilled electrical support to maintain the continuous operation and reliability of production equipment in a high-speed manufacturing environment. This role works collaboratively with electricians on shift, supports the Electrical Maintenance Manager, and ensures proper inventory management of electrical components. DUTIES AND RESPONSIBILITIES: Ø Apprenticing Registered non-licensed Electricians. Ø Provide technical assistance and support to fellow electricians during troubleshooting and repairs, ensuring minimal downtime. Ø Perform routine preventive maintenance and inspections on electrical equipment and machinery. Ø Backfill the Electrical Maintenance Manager role as needed, including oversight of daily operations, assigning tasks, and managing schedules. Ø Order electrical parts and supplies, ensuring optimal stock levels to support continuous manufacturing operations. Ø Respond promptly to equipment breakdowns, identify root causes. Implement effective solutions to restore equipment functionality. Ø Adhere strictly to company safety protocols, procedures, and electrical codes to ensure a safe working environment. Ø Collaborate closely with production and maintenance teams to identify improvement opportunities that enhance equipment reliability and efficiency. Ø Maintain clear and precise documentation of repairs, inventory transactions, and other maintenance activities. Ø Perform other related duties as assigned. QUALIFICATIONS: In addition to the specific responsibilities listed above, the ideal candidate will possess the following: Minimum Requirements Ø High school diploma or equivalent required. Ø Valid Journeyman Electrician license required. Ø Minimum of 3-5 years of industrial electrical experience in a high-speed manufacturing environment. Ø A strong background in industrial electrical, VFD, PLC, HMI, motors, sensors, and other electrical devices. Ø Proficient in reading and interpreting electrical schematics, diagrams, and blueprints. Ø The ability to use a multimeter and other electrical troubleshooting tools. Ø Excellent communication and teamwork abilities. Ø Ability to effectively backfill supervisory roles and manage team dynamics. Ø Experience with Excel and Office is a plus. Preferred Requirements Ø Working experience as an electrician in a canning manufacturing facility. Competencies Ø Strong problem-solving skills through an individual and/or collaborative approach. Ø Ability to work independently and with a team. Ø Must be able to look at new solutions and “think outside the box.” Physical Requirements: Ø While performing the duties of this job, team member is regularly required to sit, stand, walk, use hands, reach with hands and arms, and may be required to balance, stoop, kneel, crouch, or crawl. Ø The Team Member may lift and/or move up to 10 pounds. Ø Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. Working Conditions: Ø Generally, working in a plant environment may be required to perform some job duties inside a typical office setting. Ø The team member may be exposed to a wide range of temperatures. Ø The noise level is frequently loud. Ø Manufacturing environment with exposure to machinery, noise, and moving mechanical parts. Ø May require shift work, overtime, weekends, and holidays as necessary. *Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. BENEFITS: Crown provides competitive pay and performance-based bonuses for full-time team members. Employees receive comprehensive benefits, including free company-paid health insurance and a company matched 401(k). Hourly team members receive pension benefits, weekly pay, short-term and long-term disability coverage. These benefits begin on the first of the month after 30 days of employment. INTERESTED: Take the next step in your career and apply online today at www.crowncork.com/careers. This job description is subject to change at any time. Crown is an equal opportunity employer. Crown does not discriminate against any candidate or employee on the basis of race, national origin, sex, marital status, sexual orientation, age, disability, religion, veteran status, or any other status protected by law.

Job DescriptionDescription: ***Must Be Licensed in the State of Maine*** The Journeyman electrician performs a variety of tasks and assists other craft workers in the construction, maintenance, and repair activities on solar PV systems. Must have the ability to travel to and work in the state of Maine. This is a full time traveling position. Requirements: 1. Responsible for the electrical work on the construction of DG solar PV systems or community solar garden systems 2. Provide and lead all electrical work associated with solar PV installation 3. Supervise and direct installers to complete all install processes and tasks 4. Operate a variety of electrical testing equipment in locating and determining types of electrical malfunctions 5. Inspect plans, drawings, specifications, and work orders to determine work requirements and sequence of installations 6. Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools 7. Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem 8. Connect wires to circuit breakers, transformers, or other components 9. Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes 10. Provide and maintain personal hand tools 11. Use and maintain company-issued tools 12. Work outdoors on solar installations year-round 13. Climb ladders, work in attics, crawl spaces, on sloped roofs, and similar locations 14. Perform panel upgrades and other electrical work when required 15. Follow OSHA safety regulations and provided safety training 16. Lift and carry tools, materials, and parts (up to 50lbs) 17. Provide on-the-job training to apprentice electricians 18. Verify all OSHA and NES safety policies and equipment are used correctly 19. Arrive punctually to work and diligently perform the duties and tasks assigned 20. Be available for occasional overtime or emergency response 21. Ensure quality of workmanship meets or exceeds minimum industry standards Our Ideal Candidate Has: · Licensed Journeyman **Must Be Licensed in Maine** · Working knowledge of the National Electrical Code (NEC) · Advanced knowledge of safety construction, commissioning and testing electrical systems · Combination of electrical training and solar PV construction field experience · Ability to manage, train, and supervise others · High school diploma · Demonstrated critical thinking, organization and planning, prioritization, and follow-up skills · Demonstrated leadership and supervision skills · Excellent verbal and written communication skills · Attention to detail · Proficiency with Procore, or other construction management software · Proficiency with Microsoft Office 365 · Driver's license and clean driving record Bonus Points! · NABCEP PV Installation Professional certification · OSHA 30 certification · Fall protection training · Forklift operator experience · Mobile Elevated Work Platform · First aid certified · Competent in customer service and email correspondence Job Type: Full-time Pay: $50.00 - $60.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Vision insurance Schedule: 8 hour shift Education: High school or equivalent (Required) Experience: Electrical experience: 2 years (Preferred) License/Certification: Minnesota Journeyman License (Required) Willingness to travel: 100% (Required) **Novel Energy Solutions has multiple Project sites in Maine Work Location: In person

Job Description Spark Your Career at Genz Ryan as a Journeyman Electrician! Our core values: Pride, Drive, Team Player, Respect, Get Sh!t Done! Ready to take your skills to the next level with a company that values Pride, Drive, Respect, Teamwork, and Getting Sh!t Done? Join Genz Ryan, a family-owned leader in plumbing, heating, cooling, and electrical services since 1950. Typical duties for a Journeyman Electrician: Tackle general in-home electrical work, installations, and repairs. Build rapport with homeowners and build and present options based on their needs and wants. Troubleshoot circuits and appliances using the latest tools. Collaborate with dispatch and customer service for seamless operations. Promote workplace safety and contribute to a culture of excellence. Perform miscellaneous duties like a boss. Requirements Licensed MN Journeyman Electrician At least 18 year of age. Valid Driver's License Customer service oriented: Unafraid to provide customer options after truly building rapport and getting to know them. Strong communication and technical skills within the electrical world. A team player who thrives on challenges and growth opportunities Benefits Why Choose Genz Ryan as Your Work Home? Get paid weekly - who wants to wait for payday? A company vehicle + gas card - yep, we've got you covered. 100% employer-paid health and dental insurance for both you and your family. No, really - it's on us. Fully paid short-term disability. Flexible Spending Accounts (Medical and Dependent Care) because life happens. A solid 401(k) with a company match - invest in your future! Paid vacation and holidays - work hard, play hard. Continuous learning at our onsite training center to level up your skills. Serious room for growth - we promote from within. Company-provided tablet, uniform, and some seriously cool gear like hats, jackets, and hoodies. Compensation is $80,000.00-$120,000.00+ and beyond, in annual salary! Do not miss out on joining a miraculous team in a growing and changing industry! Check out our Facebook page to learn more about us: ********************************** Company Website: **************** Call ************ or email ******************** to inquire!

Job Description Journeyman Electrician HM Cragg is an 100% employee-owned company with an extremely impressive growth history. As a Journeyman Electrician, you will be responsible for installation, maintenance and repair projects of electrical systems and components specifically focused on the Telecommunications, Wireless, Utility and UPS markets. Reporting Relationship: The Journeyman Electrician will report to the Service Manager. Responsibilities/Accountabilities: · Perform skilled electrical work in the installation, maintenance, and repair of electrical systems for building & grounds and wire mold · Perform the installation of transformers, control boards, electronic circuits, coils, circuit breakers, voltage regulators, switches, fuses, and related electrical equipment · Perform installations of backup generator systems · Determine modifications required when obstructions are met while installing electrical systems · Read electrical blueprints, plans, and schematics. · Develops strong line of communication with Electrical Manager/Master Electrician and within all departments utilizing electrical service · Ability to work from wiring diagrams, schematics, sketches, blueprints, and/or verbal instructions · Proficient in the use of standard electrician's tools and measuring/testing instruments such as ammeter, ohmmeter, voltmeter, and testing lamp · Perform other duties and assignments as necessary Requirements: Skills/Knowledge · Strong knowledge of DC power equipment, specifically in telecommunications, switchgear & control, and UPS industries · Strong knowledge of generators, transfer switches, and distribution equipment · Knowledge of electrical principles, applications, techniques, procedures, code, and equipment · Knowledge of local and national electrical code · Demonstrates proper use of material handling equipment · Proactively stays up to date on safety training, compliance, and knowledge of HAZ MAT and DOT requirements · Adheres to company policies as stated in the Employee Handbook and Safety Policy Personal Attributes · Demonstrates honesty and integrity in work and relationships · Demonstrates innovation/creativity in work · Possesses strong work ethic and takes ownership of both company and client goals/objectives · Focused on understanding, meeting, and exceeding customer expectations · Focused on collaboration and teamwork for the mutual success of the company and its employees Travel Expectations: · Weekly travel up to 75% depending on customer needs · Generally home every weekend Posting Qualifications: · Licensed or the ability to be licensed in: IA, MN, ND, SD, MT, WY, WI, NE KS and MO · Ability to work at various heights · Ability to lift items greater than 25lbs (and up to 150 lbs.) repetitively on a regular basis · Ability to maintain a valid driver's license · Must pass a physical exam, background check and pre-employment drug screening. At HM Cragg, we invest in your growth with training, tuition assistance, and development opportunities, including the potential for advancement within the company. As an employee-owner, you'll receive shares of stock in our company each year that you meet eligibility requirements. You'll enjoy additional benefits such as PTO and paid holidays, company-paid Life and Disability insurance, 401k match, and contributions to Medical, Dental, and Vision Insurance.

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. We are seeking a motivated and talented in-house Journeyman Electrician who enjoys working on a variety of electrical systems and installations to include premise wiring, industrial control, motor control, and research and development (R&D) projects. Donaldson is a leader in Technology Lead Filtration and provides filters and filter systems for a variety of industries. As a growing organization we have over 14,000 employees and looking for a talented Journeyman or Master Electrician to join our team. Qualified candidates must be able to work an on-site schedule at our Bloomington, MN office. Role Responsibilities: Perform electrical duties as required and assigned to deliver a safe, efficient, and reliable electrical system for our facility. Planning and installations of electrical premise wiring and industrial control systems. Capable of troubleshooting, debugging and maintaining a wide variety of electrical systems and equipment. Knowledgeable in the operation of motor control systems, lighting control systems, HVACR systems and power distribution systems. Lead in-house and contract electricians on electrical projects as assigned. Partner with in-house technical professionals on day to day facility operations. Perform independently the work and duties required of Journeyman Electrician with a focus on quality installations. Ability to communicate clearly and concisely with the Electrical Services Supervisor and customers in a fast pace, changing environment. Responsible for documenting design changes and providing as-builts. Familiarity in the compliance and application of NEC, OSHA and Electrical Safe Work Practices Keep current on new codes, code changes and new wiring methods. Able to apply the following industry standards into the design/build of facility and R&D systems: NEMA, ANSI, UL, IEEE, NFPA and IEC. Assist and guide engineers, technicians and tradesman on a wide variety of research and development projects. A working knowledge of Fire/Burg Systems, Voice/ Data/Video and Limited Power Systems. You will be required to be on call every 4th week. Other duties may be assigned as needed. Minimum Qualifications: Must possess a Journeyman Electrician License or better from the State of MN upon hire 1+ years of Journeyman Electrician experience Preferred Qualifications: Two-year Technical College degree in the field of Industrial Electricity or a four-year certified apprenticeship training program or equivalent. Masters Electrician License Electrical experience including Industrial and Commercial installations, Electrical Plant maintenance, and a working knowledge of HVACR applications. Ability to work in a corporate and R&D environment and interact with managers, engineers, technicians, scientists, electricians, and other staff. A strong background in troubleshooting and debugging electrical systems and equipment. Experience in the layout, design and installation of electrical systems and equipment. DOT physical exam for equipment use Forklift certified Hourly Pay Range: $33 - $55, depending on relevant experience, qualifications, and skills. This position is overtime eligible as per state and federal regulations. Employee benefits are part of the competitive total rewards package that Donaldson Company, Inc. provides to you. Our comprehensive benefits program includes health benefits, retirement plan (401k), paid time away, paid leaves (including paid parental leave) and more. Relocation: This position is not eligible for relocation assistance. Immigration Sponsorship Not Available: Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.). Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. International relocation or remote work arrangements outside of the U.S. will not be considered. Key Words: Journeyman, Electrician, Electrical, Installation Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

Job Description About Sentinel Sentinel Management Company has been a trusted name in the property management industry since 1972. We specialize in managing a diverse portfolio of residential apartment communities, healthcare facilities, retail spaces, and office properties primarily in the Twin Cities market. Our mission is to provide high-quality housing and exceptional services to all members of our community. At Sentinel, we are more than a property management company. We are a people-first team dedicated to creating thriving communities. We believe in doing the right thing, building meaningful relationships, and delivering exceptional living experiences. Job Summary We are seeking a full-time Maintenance Technician to join our brand-new, 303-unit multifamily community in Golden Valley, MN. The ideal candidate can perform general and preventative maintenance and building repairs. Duties include, but are not limited to apartment turns, basic carpentry, drywall, plumbing, electrical, HVAC, appliance repair, and painting. Key Responsibilities Perform routine and preventive building systems maintenance Troubleshoot and repair appliances, HVAC systems, plumbing and electrical Complete drywall repairs, painting, and general carpentry as needed Respond to and complete maintenance service requests, document the status of each request and ensure that appropriate follow-through occurs Perform repairs on air conditioner, heating units, and refrigeration units (use of refrigerant recovery equipment requires proper certification) Replace apartment locks on rental apartments as necessary and on all recently unoccupied units, outside doors, and outbuildings to ensure security of the community Servicing residents in a friendly, customer service-oriented manner Ensure compliance with safety standards, building codes, and company policies Maintain tools, equipment, and work areas in a clean and safe condition Assist with vendor coordination and oversight of contracted work as needed Complete apartment turns, ensuring units are ready for new residents Other duties as assigned Requirements Maintenance or repair experience, preferably in property management Must hold a Certified Pool Operator (CPO) Certification A special Boiler's license is preferred but not required. HVAC certification is preferred but not required Must have a valid US driver's license Must be able to lift up to 75 pounds on occasion Must be able to pass a criminal background check Excellent organizational and time management skills Must be able to handle confidential information Available for after-hour emergencies as needed (on-call rotation) Maintenance: 5-7 years (Required) Job Type: Full-time, On-Call required on a rotating basis Hourly wage will be based on skills and previous work experience. Standard work hours are Monday through Friday 8:30 am to 5:00 pm and a rotational on-call schedule. Extended and weekend hours are required in emergency situations, and for month-end turns or special projects if needed. Benefits Generous compensation package Comprehensive benefits including medical, dental, and vision 401(k) plan with employer match Paid time off and paid holidays Company-paid life insurance Rent discount Ongoing professional training, development, and growth opportunities Please visit Careers | Sentinel Management - Premier Property Management in Twin Cities to view job postings and review Sentinel's company website! Sentinel Management Co. is an equal opportunity employer.

Job Description We have openings for electricians in Minneapolis and St. Paul, MN. Some of these jobs are high profile projects. We are especially in need of journey level and supervisory level workers. All of our positions include: Great Pay Guaranteed raises Family Healthcare Retirement All Benefits are 100% employer paid Opportunity for every skill level Free upgrade and leadership training Contractor provided power tools Overtime opportunities Job Responsibilities for Commercial and Industrial Electrician: Installation and Maintenance: Install, maintain, and repair electrical systems in commercial and industrial settings, including wiring, panels, circuits, motors, and equipment. Troubleshooting and Repairs: Diagnose and troubleshoot electrical issues, using a variety of tools and techniques to identify and resolve problems efficiently. Compliance with Codes and Standards: Ensure all electrical work adheres to local, state, and federal electrical codes, safety standards, and building regulations. Blueprint Interpretation: Read and interpret blueprints, schematics, and technical drawings to plan and execute electrical installations and upgrades. System Upgrades and Modifications: Upgrade and modify existing electrical systems to improve performance or meet new requirements, such as adding outlets or equipment. Safety Protocols: Adhere to strict safety protocols, including lockout/tagout procedures, to ensure the safety of the work environment. Collaboration: Work closely with other contractors, engineers, and team members to complete projects on time and within budget. Preventive Maintenance: Conduct regular inspections and preventive maintenance on electrical systems and equipment to reduce downtime and increase operational efficiency. Emergency Response: Provide on-call support for emergency electrical repairs, ensuring quick response and resolution of critical issues. Job Posted by ApplicantPro

Join SPLASH Products, a division of Factory Motor Parts, Inc., as we seek a dedicated Industrial Maintenance Technician for our Saint Paul, MN production facility. This individual will be responsible for the care, repair & preventative maintenance of the facility and its equipment. This role is scheduled for 2nd shift: Monday - Friday 2:30pm to 1:00am with overtime as needed. DUTIES & RESPONSIBILITIES: Perform emergency/unscheduled repairs of production equipment during production. Performs daily PM's, as well general maintenance, and routine production line change overs. Maintain and track repairs with CCMS and Red Zone programs to help manage the facilities downtime and increase production. Ensure safety standards and expectations are met at all times. Maintain a clean, safe work station and surrounding areas. Complies with all company policies & procedures including but not limited to attendance & appearance. Assist other team members as needed. Other duties as assigned. MINIMUM REQUIREMENTS: High School diploma or GED. Previous manufacturing or general maintenance experience. 1-2 years minimum. Working knowledge and proper use of power and hand tools. Working knowledge of equipment such as Drop Packers, Top Sealers, Palletizers, Case Erectors, Blow Molding machines is preferred. Knowledge of Pneumatic, hydraulic, electrical, and conveyor systems. Ability to work effectively with others, as well as independently. Ability to effectively communicate with fellow employees. WORK ENVIRONMENT: Work is performed in a manufacturing setting with machinery. Physical essential functions of the job include but are not limited to: standing for long periods of time, bending, reaching, and moving around machinery. Lifting up to 50 lbs. on a regular basis. Ability to consistently work in extreme temperatures. We are an EEOC/AA Employer. An industry leader, FMP offers well-balanced compensation and benefits programs, which may include medical, dental, vision, life, 401K, profit sharing, paid holidays/vacation/sick time, STD/LTD, + much more. Salary is based on experience and job performance.

We are Reckitt Home to the world's best loved and trusted hygiene, health, and nutrition brands. Our purpose defines why we exist: to protect, heal and nurture in the relentless pursuit of a cleaner, healthier world. We are a global team united by this purpose. Join us in our fight to make access to the highest quality hygiene, wellness, and nourishment a right and not a privilege. Supply Our supply chain is the backbone of our business. It's how we get our trusted products to people all over the world, safely and efficiently. And it's our talented and passionate teams that make this happen. If you're looking for a career in supply chain, there's no better place to be than Reckitt. We offer a variety of exciting opportunities in all areas of the supply chain, from planning and procurement to manufacturing and logistics. You could join our Global Supply Planning team to develop and implement our global supply strategy, or work with our Procurement Centre of Excellence team to negotiate and manage our supplier relationships. Our Manufacturing Excellence team help us improve the efficiency, quality and safety of our manufacturing operations, and our Logistics Excellence team develop new and innovative ways to distribute our products to customers. About the role The Weekend Maintenance Support Lead is responsible for all site preventive and corrective maintenance processes. The individual in this role supports the site as a working lead, with both maintenance and leadership skills. The individual will have strong previous background in industrial maintenance, including both electrical and mechanical skills. The individual must report on the daily performance of the weekend maintenance teams to Maintenance Management. The individual is responsible for follow-up with work order generation and parts identification for both day and night shift weekend teams, and drive resolution in collaboration with the Maintenance Supervisor and Maintenance Planner to ensure all findings are action planned and repaired and report all parts usage using sign out processes currently available. Schedule: Friday - Monday 6 AM - 4 PM Your responsibilities * Follow and exemplify all safety and food safety rules, processes, policies and procedures. * Demonstrate Reckitt values * Coordinate weekend maintenance activities for both day and night weekend shifts by planning out work with the Supervisor and Planner through a weekend planning meeting. * Coordinate weekend work with production management and supervision. * Provide a first line of leadership in maintenance for the escalation process. Is the "Go To" from Friday evening through Monday morning. * Provide input on weekend mechanical performance to the Maintenance Supervisor and Maintenance Manager. * Perform Preventive Maintenance tasks * Troubleshoot and repair all equipment in the facility, to include but not limited to conveyors, fillers, labelers, can seamers, end cappers, automatic case packers, automatic palletizers, shrink wrappers, stretch wrappers, and printers. * Troubleshoot and repair HVAC Systems and equipment * Troubleshoot and repair PIV's (Powered industrial vehicles) Troubleshoot and repair 480-volt 3 phase electrical systems, 208/230, 240, and 120-volts AC equipment * Automated system troubleshooting * Tig and Mig Welding (Sanitary welding experience is a plus). All other hot work to include OxyAce Cutting * Machining (Lathe and End Milworkicating) * New Equipment Installation (Equipment setting and electrical hook-up) * Operate PIVs to include, but not limited to, Forklifts, Scissor Lifts, Articulating Lifts * Use common hand tools and power tools * Record all work activities using the current CMMS - SAP. This includes completed work, work input on new work, work order creation, and parts checkout * Follow daily work schedule. Notify Maintenance Supervisor or Maintenance Manager if work is not completed. * Work holidays and weekends as required to support site maintenance shutdowns * Learn new job-related skills as required. This includes all training on new equipment. * Perform maintenance shop clean up and organizing tasks. * Demonstrate intellectual curiosity and a "can-do" approach to problem solving. The experience we're looking for * Have a two-year associate degree in industrial maintenance, Electrical, or Mechanical Technology and have a minimum of two (2) years of industrial maintenance to include electrical and mechanical experience; or have 5 years combination of maintenance education and experience. * Be a collaborative leader. strong team player, with solid interpersonal skills. * Be a self-starter, able to work effectively with minimal supervision, with good organizational and planning skills. Benefits * Health, Dental, Vision Insurance * 401(k) up to 6% company match * Annual Profit Sharing * 4 weeks' vacation * 12 fixed holidays + 3 floating holidays * 2 Paid Volunteer Days * Life insurance * HSA / FSA * Employee assistance program After 1 year of service - * Tuition reimbursement * Maternity / Paternity leave What we offer With inclusion at the heart of everything we do, working alongside our four global Employee Resource Groups, we support our people at every step of their career journey, helping them to succeed in their own individual way. We invest in the wellbeing of our people through parental benefits, an Employee Assistance Program to promote mental health, and life insurance for all employees globally. We have a range of other benefits in line with the local market. Through our global share plans we offer the opportunity to save and share in Reckitt's potential future successes. For eligible roles, we also offer short-term incentives to recognise, appreciate and reward your work for delivering outstanding results. You will be rewarded in line with Reckitt's pay for performance philosophy. US salary ranges USD $34.25 / Hourly ($31.50 + $2.75 lead) US pay transparency The base salary range for this role will vary based on experience in job and industry, training and education, skills relevant to the position, and other factors permitted by law. In addition to the base salary, the position is eligible for an annual discretionary bonus, which is subject to change each year. Reckitt offers eligible employees competitive benefits including medical, prescription, dental, vision, and life and disability insurance; paid time off for vacation, sick and Company recognized holidays; a 401(k) plan; 16-week paid parental leave or 26 weeks for the birthing parent; adoption and fertility support; tuition reimbursement; discounts; and much more. Our compensation and benefits packages aim to give our talent the reward, protection, and peace of mind they deserve. If reasonable accommodation is needed to complete your application, please contact ******************************* .Reckitt is committed to the full inclusion of all qualified individuals. Equality We recognise that in real life, great people don't always 'tick all the boxes'. That's why we hire for potential as well as experience. Even if you don't meet every point on the job description, if this role and our company feels like a good fit for you, we still want to hear from you. All qualified applicants will receive consideration for employment without regard to age, disability or medical condition; colour, ethnicity, race, citizenship, and national origin; religion, faith; pregnancy, family status and caring responsibilities; sexual orientation; sex, gender identity, gender expression, and transgender identity; protected veteran status; size or any other basis protected by appropriate law. Nearest Major Market: Red Wing Job Segment: Nutrition, Counseling, Healthcare

Description Triad Associates Inc., a division of Concordia Group, is a privately held full-service engineering and telecom infrastructure construction firm experiencing rapid growth across the country. Clients consider us the ‘best choice' for their design and construction needs. We are one of the very few engineering firms in the country that designs and builds its own creations in the wireless sector. We support Fortune 500 clients such as T-Mobile, Verizon, US Cellular, Dish Network, and AT&T. We offer competitive compensation and robust benefits including BCBS health care, dental, vision, PTO and sick leave plans, company vehicle with gas card, generous per diem when traveling, PLUS an overly generous 401K program (what can we say, we LOVE our employees)! Come join in our success! Pay Range: $30.00 - $42.00 / hour Factors, such as but not limited to, geographical location, relevant experience, education, and skill level may impact the pay for this position Responsibilities: Please note: this role requires extensive travel. Road warriors welcome! Install and repair electrical equipment on cell phone towers Work closely with construction crews and Project Managers to meet deadlines Perform routine maintenance on electrical wiring and systems Be responsible for the electrical installation that meets client standards for the quality of work, with an emphasis on meeting the budgeted hours available. Be knowledgeable of all aspects of electrical construction materials and control equipment that make up the field installation part of a cell tower site Interprets drawings, sketches, software, plans and determines best work procedures, tools, equipment needed to troubleshoot and repair problems Inspect cell tower sites for compliance with plans and specifications, point out deficiencies, coach and take corrective action as needed. Provides training, direction, and mentorship to our Electrical Apprentice/Construction Crews. Promote safety on the jobsite in connection with the installation and service work. Measures, cuts, bends, threads, assembles and installs electrical conduit; weld supports; install cable and duct banks; make terminations Qualifications: Be a licensed Journeyman Electrician in the desired state Experience in the construction industry, telecom industry experience is a plus Ability to work in a team environment with construction crews, Project Managers, and Foremen Work in all weather conditions Have a valid Driver's License Triad Associates Inc. is a division of Concordia Group. Triad Associates Inc. is a drug and alcohol free workplace including marijuana. Triad Associates Inc is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers. If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" Industrial Maintenance / Cyclotron Service Technician - Minneapolis, MN The shift for this position is 6pm to 2:30am, Monday through Friday. Shift: Please note that this is primarily an afternoon/night shift position; flexibility to work alternative shifts is required. Paid Training & Relocation Assistance available. The pay range for this position is Min $55,230 - Max $82,850 annually. Required qualifications: Must have strong hands-on Electrical and Mechanical Troubleshooting skills Preferred Qualifications/Education/Experience: You have experience in repairing CRL and Telemanipulator remote arms This position may suit you best if you are familiar with what is below: You have good PC skills (MS Office software like Word, PowerPoint, Excel and Outlook) You have very good electrical/mechanical abilities. You will be working with our latest technology and therefore you are willing to learn about new software and hardware solutions. Willingness to travel and flexibility, including short-term international deployment, is expected. You have very good presentation skills in the customer environment, and you show team orientation, communication skills and customer orientation.