Maintenance electrician jobs in Flint, MI - 633 jobs

We are seeking a skilled and versatile Maintenance Technician 1 to join our client's team in Troy, MI. In this role, you will perform preventive maintenance, troubleshoot equipment, and support facility operations to ensure optimal performance and safety. This position requires strong mechanical aptitude, fabrication skills, and the ability to work independently with minimal supervision. RESPONSIBILITIES AND ESSENTIAL DUTIES: Perform duties safely using approved safety equipment and procedures. Troubleshoot Trystar equipment with minimal supervision; contact manufacturers for technical support as needed. Perform preventive maintenance (PMs) regularly and as required. Update maintenance management software by entering assets, work orders, and generating PM/work order status reports. Apply general fabrication skills, including welding (MIG & TIG), plasma cutting, torch cutting, and band saw cutting. Read facility blueprints for equipment and production line layout. Apply mechanical knowledge and basic electrical meter skills for troubleshooting. Disassemble and diagnose mechanical failures; perform necessary repairs. Assist with machinery installations and maintain most equipment independently. Apply plumbing skills for facility maintenance (e.g., sinks, drain lines, toilets). Apply HVAC skills for equipment and facility maintenance (e.g., heaters, furnaces, AC systems, exhaust fans). Assist outside contractors with machinery repairs and installations. Maintain knowledge of pneumatics (repair airlines, fittings, valves, cylinders) and hydraulics (replace hoses, pumps, valves). Maintain a clean and organized work area throughout the day. Safely operate forklifts and scissor lifts. Inventory and control stock of maintenance supplies. Participate in continuous improvement efforts by identifying and supporting process improvements. MINIMUM REQUIREMENTS: Basic Qualifications High school diploma or equivalent (GED). Two years of technical training in industrial maintenance or building repair OR four years of experience as an Industrial Maintenance associate. Ability to read, write, and understand work instructions in English. Familiarity with operating power tools. Ability to safely perform job responsibilities. Flexibility in work hours and participation in on-call rotation. Positive attitude and adherence to company policies.

Shift: various start times-various end times Hourly Rate: $42.73 an hour + $0.25 2nd Shift or 0.40 3rd Shift shift differential Conagra Brands is located in Imlay City. You will work onsite in the role of Maintenance Electrician. You will report to the Maintenance Supervisor and enjoy the comradery of a maintenance team and a home base. Need for travel is rare. You will work either an afternoon or midnight shift. You will be responsible for new installation of conduit and repairs, electrical motors/industrial controls, working with AC/DC voltages, PLC programming, hardware networking and communication. Come Grow with Us! Growth and development, administered by ConAgra, through company sponsored training program. ConAgra provides paid time on-the job training. Enhance your skills and advance your career! Where do you fit? Hourly Rate determined by Experience/ Skills/ Certifications - Unlicensed Electrician hourly rate $34.68/hr., Journeyman Electrician hourly rate $38.59 or are you a Master Electrician $42.74/hr. + $0.40/hour 3rd shift premium or $0.25/hour 2nd shift premium. Eligible for Michigan Earned Sick Time. You will earn one hour for every thirty hours worked. Requirements * Program, Debug PLC's and HMI's with Allen Bradley * Strong working knowledge of motion controllers, PLC's and HMI's * Experience with Allen Bradley Control Logix * Responsibilities * Maintain programming, hardware networking, and communication * Compliance with plant safety and environmental regulations * Complete special projects * Working knowledge of electrical motors and industrial electrical controls, including design, wiring and troubleshooting of advanced motor control circuits * Prior experience should include fabricating, machine shop skills and a mechanical background * Familiar with variable frequency drives and troubleshooting * Use blueprints, wiring diagrams and manufacturer's installation manuals to complete assigned projects * Support delivery of brand quality and customer satisfaction * Work at heights and confined spaces * Qualifications * Bachelor of Science, Associates, Certificate in an Engineering field or Electrical Journeyman/Master licensure * High School Diploma/GED required #LI-Onsite Anticipated Close Date: January 31, 2026 Location: Imlay City, Michigan Our Benefits: We care about your total well-being and will support you with the following, subject to your location and role: * Health: Medical, dental and vision insurance, company-paid life, accident and disability insurance * Wealth: Great pay, 401(k)/pension eligibility, financial wellness programs and stock purchase plan * Growth: Career development opportunities, employee resource groups and team collaboration * Balance: Paid-time off and volunteer opportunities Our Company: At Conagra Brands, we have a rich heritage of making great food. We aspire to have the most impactful, energized and inclusive culture in food. As a member of our 18,000+ person team across 40+ locations, you are empowered to reach your potential, make an impact and own your career. We're in the business of building champions - within our people and our iconic brands like Birds Eye , Slim Jim and Reddi-Wip. Our focus on innovation extends beyond making great food, it also reflects our commitment to embracing new solutions that positively impact our team, the communities we serve and the health of our planet. Foodies Welcome. Conagra Brands is an equal opportunity employer and considers qualified applicants for employment without regard to sex, race, color, religion, ethnic or national origin, gender, sexual orientation, gender identity or expression, age, pregnancy, leave status, disability, veteran status, genetic information and/or any other characteristic or status protected by national, federal, state or local law. Reasonable accommodation may be made upon request.

Job Description WHAT YOU'LL DO Repair and Maintenance of building, presses, and equipment throughout plant. Perform adjustments, repairs, or replacements on motors, controls, and other electric equipment. Responsible for supporting the team goals of the assembly, and press departments. Responsible for participation in press set-ups, teamwork, and continuous improvement of press set-up time. Adhere to all safety procedures, including Lockout/Tag out and electrical safe work practices. Responsible for all PM tasks, corrective actions, and improvements to assigned equipment. Required to follow all maintenance systems and proper documentation procedures as outlined in the work instructions, including preventive maintenance procedures, downtime recording procedures, and work order procedures. Serves in the capacity of wastewater handler commensurate with completion of proper training Adapt and promote lean manufacturing principals Active participant in the Elimination of Waste Team meetings Support the Company's Goals and Objectives Other duties as assigned WHAT YOU'LL NEED TO SUCCEED Knowledge of stamping presses, conveyors, CNCs, washers, assembly machines, various automation and related machinery Knowledge of pneumatics, lubrication, and hydraulics circuits Knowledge of basic electrical circuits and diagrams Knowledge of MiG and or arc welding and use of cutting torches Must be able to read and interpret hydraulic, pneumatic and lubrication schematics Must be able to work with minimum supervision Possess working knowledge of IATF16949, ISO 14001, and Q1 compliance criteria WHAT'S IN IT FOR YOU Employee Stock Ownership Plan Incentive Bonus Medical, Vision, Dental Prescription Drug Plan 401K Paid Vacation & Holidays Short-Term Disability Tuition Reimbursement Health and Wellness Reimbursement Employee Recognition Discount Programs WHAT ELSE YOU'LL NEED TO KNOW Must be able to work necessary overtime if required Excellent manual dexterity, ability to lift and carry up to 80 pounds frequently Usage of a computer, printer, calculator, press and machinery control panels Work may require extended periods of sitting, standing, lifting, bending, stooping and performing repetitive motion tasks

This job requisition provides candidates to locations throughout Southeast Michigan. This job requisition is not location specific. Rate of Pay and Benefits: Electricians are paid a top hourly base rate of $45.115, plus applicable shift, overtime, and holiday premiums. The starting rate for this position is $44.915 with pay increases to the top rate upon completion of three consecutive months of employment. Benefits: Immediate access to Best-in-Class Company provided healthcare! Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision. Basic Life Insurance and Accidental Death and Dismemberment Insurance. Accident and Sickness and Extended Disability Benefits. Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour. Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, or protected veteran status. Candidates must have completed a bona fide apprenticeship, or have 8 years of previous experience, or have a combination of previous work experience and training equivalent to a bona fide apprenticeship program in the trade. Proficiency in reading hardware and ladder logic prints, troubleshooting electrical and robotic systems and equipment (e.g. Fanuc. ABB, Kawasaki). Working knowledge with PLCs (e.g. Allen Bradley, Square D, Control Logix) servo controls and variable frequency drives is required. Successful completion of a job interview, pre-employment drug screen, physical, and background check are required. Drug panel does not include THC. Willingness and ability to work on any assigned schedule, change shifts, work more than 8 hours per day and/or work overtime, all while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures, to work in a team environment, treat co-workers with dignity and respect regardless of personal differences, and accept and follow instructions and requests from leadership. Ability and willingness to understand and follow instructions, both oral and in writing. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade. Tasks will require a certain amount of reaching, lifting, twisting, bending, and use of a PMHV or Hilo. Ability to perceive differences in details and prints related to trade. Must be able to effectively maneuver about vehicles, equipment, assembly lines or stations, and about facility.

Midwest Press and Automation is a metal forming & automation equipment industry. We are looking for a full-time Industrial Electrician. This opportunity will consist of troubleshooting, repairing, and installing new/used equipment at our customer's facilities throughout the United States and Mexico. Previous experience with PLC, HMI's and Wintriss components is required. Position Responsibilities: Layout, assemble and wire a control panel complete Layout and bend conduit in consistent straight and contour lines Completely wire a new press rebuild from scratch Understand and wire VFD drives and motors Understand the operations of a stamping press and its ancillary equipment Troubleshot a stamping press and its ancillary equipment Perform Inspections of metal forming and related equipment (mostly presses). Disassemble equipment and check for damage and excessive wear. Document findings and review with MPA supervision or engineering. Clean, deburr, and prepare components for assembly. Fit and assemble components using best industry standards and procedures. Positively represent MPA both in plant and at customer facility. Always follow safety protocol. Respect and adhere to customer safety protocol at their facility, as it may differ from those used at the MPA facility. Maintain good housekeeping practices in the work area both in plant and at customer facility. Be a courteous driver and obey traffic laws while driving to and from customer facility. You are still a representative of MPA. Skill & Experience Requirements: Electrical experience Read & understand electrical blueprints Understand machine tool wiring (Low voltage, high voltage, motor circuits) Allen Bradly PLC and touchscreen proficiency Self-motivated Displays mechanical aptitude Read & understand instructions, procedures, and prints. Measuring and basic mathematics Benefits we offer: Wage range $23-$43 with shift premium Additional $6/Hr. for Overnight premium for outplant overnight work $59.00 per diem for overnight work. Medical, dental and vision plans 401(k) with a generous company match Paid vacation & holidays

Set your career in motion with ATESTEO. Join the leader in drivetrain testing at our new test center in East Lansing, Michigan! ATESTEO is the worldwide leading independent drivetrain specialist, offering automobile manufacturers around the globe a full range of powertrain testing and engineering services. We support manufacturers of passenger cars, commercial trucks, rail vehicles, and off-road vehicles to develop best-in-class drive systems for internal combustion engines, electric and hybrid vehicle drive systems, and propulsion systems of the future. ATESTEO combines testing and engineering depth, continuous innovation, and superior execution to deliver reliable and valid test results. Our innovative strength relies on the expertise and experience of each and every employee. It is their qualifications and motivation that make us the leading specialist in drivetrain testing. Come join our collegial environment and shape the future of mobility! ATESTEO is growing! We are opening a new test center in Lansing, Michigan - the perfect opportunity for you to contribute to building our newest location from the ground up. Get in on the action and bring your ideas to life! Install electronics and place test benches into service Assemble control cabinets and 19-inch racks according to specifications Connect vehicle electronics and measurement technology Assemble and modify wiring harnesses Provide electrical engineering support for clients' test objects Maintain test bench and house technology Conduct initial and repeat testing of electrical systems Test electrical devices and machines in accordance with DGUV 3 Completed technical training or apprenticeship as an electronics technician for industrial engineering, or comparable training Proficient in using Siemens TIA and WS CAD programs Proficient in using the MS Office suite High ability to work in a team, flexibility and willingness to learn and do independent work Willingness to take on mechanical work in individual cases Strong communication skills of both oral and written English ATESTEO offers unique experiences and personalized career development in a variety of interesting jobs at a growing international company. You can expect a top-notch work atmosphere with quick decision-making processes, pleasant and personal interaction, respectful cooperation with supervisors and colleagues, and ergonomic and safe workplace design. As part of ATESTEO, you'll enjoy excellent compensation and a comprehensive benefits package that includes our own health management plan, company pension plans, and much more. Ready to join our team? Apply now! All job offers at ATESTEO We will consider qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability status, medical condition, pregnancy, protected veteran status, or any other characteristic protected by federal, state, or local law. VISA LANGUAGE ATESTEO does provide sponsorship for employment visa status based on business need. However, for this position, please only apply if you DO NOT need sponsorship to work in the Unites States now or in the future. We are unable to consider candidates who require sponsorship

Now Hiring: Industrial Electrician - Saginaw, MI Pay: $50 per hour + $200/day Per Diem (Paid 7 Days/Week) Hours: 60-70 Hours per Week (ALL OT PAID AS DOUBLE TIME) | Long-Term Project Industry: Refinery/Industrial Electrical Work We are currently hiring experienced Licensed Electricians for a long-term project at an industrial refinery site in Saginaw, Michigan. This is a high-paying opportunity for electricians who are looking for steady overtime, per diem benefits, and long-term stability in a demanding industrial environment. Position Summary: The Licensed Electrician will perform electrical installations, maintenance, and troubleshooting at a large-scale refinery facility. Candidates must be able to work extended hours, follow all safety protocols, and demonstrate strong technical knowledge of electrical systems in heavy industrial environments. Key Details: Pay: $50/hour Per Diem: $200/day - paid all 7 days per week Schedule: 60-70 hours per week (overtime after 40 hours) Duration: Long-Term Project Location: Saginaw, MI Industry: Industrial/Refinery Responsibilities: Install, maintain, and repair electrical systems in a refinery environment Read and interpret blueprints, schematics, and electrical drawings Perform conduit bending, wire pulling, terminations, and panel installations Troubleshoot and resolve electrical issues efficiently and safely Work independently and as part of a team under the direction of site supervisors Maintain compliance with NEC and refinery safety standards Requirements: Active State of Michigan Electrical License (Journeyman or Master) Minimum 4 years of industrial or refinery electrical experience Familiarity with high-voltage systems, controls, and hazardous locations Strong understanding of the National Electrical Code (NEC) Must be able to pass a background check and drug screening Reliable transportation and willingness to work extended hours on-site What We Offer: Top industry pay with weekly direct deposit Full per diem paid all 7 days per week Steady, long-term work with overtime potential Safe, well-managed job site Opportunity to work on a high-profile industrial project

At Hoover, we're more than just a home services company - we're a community. Where we are proud to be a trusted local business that's rapidly growing; thanks to our commitment to quality work, exceptional employee satisfaction, ongoing support and training we offer our team. We're looking to continue our growth by adding a new Residential Service Electrician who is both skilled and customer focused! At Hoover - where we take care of our employees like family and deliver the quality our community depends on. You get more than just a paycheck you get the chance to take your career to the next level. What's in it for you? Competitive Pay: $27-37/Hour DOE Comprehensive Benefits Package: Medical Dental Vision Prescription Life Insurance Short Term/Long Term Disability Coverage Employee Assistance Program (EAP) NB Fitness Discount 6 Paid Holidays Paid Time Off + Vacation Biweekly Pay! Consistent Weekly Work Schedule Company provided: Gas Card, Truck, iPad and Uniforms Ability to dispatch from home! Company match 401K Retirement Plan Ongoing Weekly Training - Enhance your sills both technically and professionally. What you'll accomplish: While technical expertise is essential, success in this role is defined by your ability to build trust with homeowners, communicate clearly, and offer smart, value-driven solutions that improve safety, efficiency, and long-term system performance. Diagnose, troubleshoot and repair residential electrical issues with precision and efficiency Educate homeowners on technical findings, recommended solutions, and potential associated costs. Conduct full-home safety inspections (60-90 minutes) to identify hidden issues or safety concerns Proactively recommend upgrades or preventative improvements (e.g., wiring replacement, circuit panel upgrades, GFCI outlets, surge protection) Prepare detailed quotes and service invoices using company software (Service Titan) Participate in training sessions to strengthen your technical expertise and customer communication skills What Success Looks Like: Complete 3-4 service calls per day 70%+ conversion rate on recommended repairs or upgrades Deliver thorough and insightful whole-home safety inspections on each visit (60-90 minuets) Actively promote and contribute to membership plan sales Consistently keep monthly call-back rates low through quality workmanship Build strong relationships with homeowners and deliver 5-star customer experiences Traits we admire: Professional: Proven customer service skills with the ability to explain complex issues in simple terms Coachable: You are a high energy and are driven to seek continuous improvement A teammate: you enjoy working in small teams, building relationships, and supporting others Quality focused: Solid diagnostic and problem-solving skills Customer-first mindset: you love helping people, and have a commitment to doing the job right the first time Entrepreneurial: Willing to ask for the business Requirements State-issued Apprentice or Journeyman Card 4+ years of experience in Electrical Work 1-2 years of residential electrical service experience (more a plus) Valid driver's license with a clean driving record Experience using Service Titan or other service management software preferred Salary Description $27-37

Job DescriptionBenefits: 401(k) 401(k) matching Company car Competitive salary Free food & snacks Health insurance Paid time off Tuition assistance About us: DC Illuminations has been in business over 20 years located in Rochester Hills MI. Jobs are in metro Detroit area; Oakland, Wayne and Macomb County. We do not travel out of state. Forty plus hours for Journeyman Electricians and apprentice electricians. Commercial and residential work. We are a great company to work for, very low turnover, plenty of room to grow, happy workplace. Looking for an electrician to perform service work on a daily basis in both the commercial and residential setting. Applicants must have all own hand tools, and valid driver's license, journeyman card is preferred. Vehicle will be provided to qualified candidates. Serious replies only, looking for at least four years of electrician experience, if you do not meet these qualifications please do not apply. Benefits: Company offers health benefits, 401k, paid holidays, and vacation time. Pay varies depending on experience.

Industrial Maintenance Technician Compensation: Starting wage is $28.00 to $33.00 per hour Schedule: Availability to work nights, including Sundays, 12-hour days. About Aunt Millie's: Aunt Millie's, a popular family-owned bakery, has been celebrated for its commitment to quality and community since its inception. Renowned for producing a wide range of baked goods from breads to pastries, Aunt Millie's prides itself on using traditional recipes and fresh, locally sourced ingredients. This establishment not only offers a nostalgic embrace of home-style baking but also operates with a forward-thinking mindset towards sustainability and innovation in food production. Why Work Here: We are proud of the products we make and we're even more proud of how we make them. Aunt Millie's combines the best ingredients, recipes, and people to produce consistently high-quality breads and rolls that you will be proud to represent. We invest in good ingredients and good people alike, so that at Aunt Millie's you'll have more than a job, you'll have a career you can be proud of. Perks and Benefits: Standard benefit package may be offered depending on position. To be discussed during the interview. Position Summary: Aunt Millie's Bakeries is now hiring Maintenance Technicians. In this role, responsibilities include adhering to safety and food safety regulations, enhancing the Preventative Maintenance program to reduce downtime, and troubleshooting and repairing various systems including PLCs, electrical, and mechanical systems. Duties also involve collaborating with multiple departments, organizing the maintenance shop using 5S methodology, and learning the Enterprise Asset Management (EAM) system. Additionally, the position requires training new technicians, communicating effectively, and handling other assigned tasks. Essential Job Functions: Ensure safety and food safety by adhering to all company, OSHA, and government regulations, including implementing Lock-out/Tag-out procedures and following Good Manufacturing Practices (GMPs). Support and enhance the Preventative Maintenance (PM) program to consistently reduce unscheduled downtime. Troubleshoot, diagnose, and develop sustainable solutions for issues with equipment, including PLC-controlled equipment, plant electrical, hydraulic/pneumatic, and mechanical systems such as motors, instrumentation, distribution, and feed control systems. Work collaboratively within a team environment that includes production, sanitation, engineering, and maintenance departments. Organize the maintenance shop using 5S principles. Learn and effectively utilize the Enterprise Asset Management (EAM) computerized maintenance system. Acquire and implement safe work practices, facilitating advancement to higher technician roles. Perform additional tasks as assigned and effectively communicate written job instructions. Train Entry Level Maintenance Technicians and Maintenance Apprentices. Minimum Position Qualifications/Education: High School Diploma or GED ; vocational or technical education is preferred. At least 2 years of experience in industrial maintenance , with 5 years preferred, and experience in food manufacturing is ideal. Ability to work any shift and overtime as needed, including days, weekends, and holidays. Must meet the physical demands of the job, such as kneeling, bending, lifting, working at heights, and wearing required PPE. Proficiency in using basic electrical troubleshooting equipment. Capable of wiring electric motors and performing routine maintenance and troubleshooting of variable frequency drives (VFDs), electrical motors including three-phase equipment, sensors, and various digital and analog input/output devices. Experience in welding (any type) and reading/understanding electrical schematics and mechanical blueprints is beneficial.

Job Title: Industrial Maintenance Technician Department: Facilities Under the general supervision of the Manager of Facilities, the Industrial Maintenance Technician performs skilled maintenance, repair, and inspection work to ensure that the Authority facilities, grounds, and related equipment are safe, functional, and in compliance with applicable codes and regulations. This role supports daily transit operations by maintaining buildings, bus terminals, park-and-ride lots, and other Authority properties. The position works cooperatively with SMART management, employees, and contractors to ensure the quality and timeliness of facility maintenance efforts are acceptable to federal, state, and Authority standards. Duties and Responsibilities Assists in overseeing contractors used in minor construction projects such as; curb cuts, lead walks, door/gate repairs, electrical repairs and wiring, pump and motor replacement, roof repairs, plumbing, etc. Coordinates with Parts Department and/or Facilities Project Manager to care, store, and account for inventories used in activities. Recommends to supervisors to stock or re-stock needed materials, supplies, and equipment. Completes and maintains work orders, journals, reports, and other records as necessary to document, track, and otherwise control and assess the repair, maintenance, or replacement of all facilities and appurtenances. Daily drives Authority vehicles including transporting fellow workers, supplies, and equipment to and between various locations to perform facilities maintenance duties at all SMART facilities. Prepares daily activity reports on the consumption of parts and materials, inventory control and purchasing of replacement supplies for Facilities Managers review and approval. Maintain floors, parking lots, curbs, sidewalks and other paved or graveled areas by power and/or hand scrubbing, sweeping and vacuuming. Clearing tree limbs, brush, and other landscape issues away from Authority premises. Cleans and maintains storage cabinets, windows, doors, guard rails, and other fixtures. Empties trash dumpsters, recycling containers and scrap bins. Performs custodial services as needed or requested. Ensure restrooms are clean and stocked with necessary paper products, and repairs restroom appliances as needed. Performs maintenance and keeps records on fire prevention system (smoke alarms, sprinklers, extinguishers, hoses, etc.). Supervises preventive maintenance by subcontractors. Assists with the annual fire alarm and riser inspection. Performs preventative maintenance and supervision and support for contaminated waste processing, storage, removal, and disposal. Cleans all primary and secondary waste containers at all SMART facilities. Maintains the fleet fueling system(s) using preventative maintenance, record keeping, repairing or supervising the repair of fuel system meters, hoses, nozzles, underground tanks, valves, filters, pipes, pumps, etc. Maintains water and sewer systems (plumbing, bathrooms, drains, meters, sinks, softeners, disposal and trench drains, bus washers, filters, sumps, etc.). Keeps records on repairs, cleaning, painting and ordering spare parts. Coordinates the repair of time devices, including master clock, time clocks, time stamps, and regular wall clocks. Provides effective interior and exterior lighting systems using preventative maintenance, repair, replacement, cleaning, upgrade and ordering parts for interior, exterior and emergency lights, ballasts, starters, lenses and fuses. Oversee the maintenance of SMART lawns, shrubbery, groundcovers, flowers, plants, and trees at all locations. Removes snow and ice from buildings, sidewalks, boarding locations, and driveways. Uses salts and chemicals to control buildups of snow and ice. Services and maintain equipment used in snow/ice removal. Repair/replace doors, gates, windows, glass, and facility appurtenances. Performs semiskilled plumbing, electrical, mechanical, and carpentry duties as may be associated with minor repairs or improvements to facilities. Knowledge, Skills & Abilities High school diploma or GED; technical/vocational training in building maintenance or related trade preferred. Minimum 3-5 years of experience in facilities or maintenance work, preferably in a transit or public sector environment. Working knowledge of HVAC, plumbing, electrical, and general building systems. Ability to read and interpret blueprints, schematics, and technical manuals. Valid driver's license (CDL may be required depending on agency needs). Ability to lift up to 50 lbs., climb ladders, and perform physically demanding tasks. Strong problem-solving skills and ability to work independently or as part of a team. Flexibility to work evenings, weekends, or respond to emergency call-ins as needed. Working Conditions: Indoor and outdoor environment; exposure to weather, noise, dust, chemicals, and moving equipment. May require on-call availability for emergencies. SMART is an Equal Opportunity Employer - Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age THE AUTHORITY RESERVES THE RIGHT TO REVISE OR CHANGE THIS JOB DESCRIPTION AT ANY TIME. #ZR

The Asahi Kasei Group operates with a commitment of creating for tomorrow. Our business sectors, Material, Homes, and Health Care, contribute to the development of society by anticipating the changing needs of those around the world. We look for candidates that offer a fresh perspective and a variety of skills to help us achieve our commitment.We are currently seeking applications to fill the following job opening at Asahi Kasei Plastics North America where our products are used in a wide array of molding applications including automotive, consumer, electronics, furniture, and industrial parts and they provide excellent solutions for pressure vessels. Company: Asahi Kasei Plastics North America, Inc. Job Description: We are seeking someone with advanced electrical and mechanical maintenance skills for all processing and plant support equipment including, but not limited to, extruders, compressed air systems, process water systems, plant vacuum systems, feeder systems, dust collection, and die exhaust systems. You will troubleshoot and maintain complex electrical systems, including motor, feeder, and extrusion control systems, HMI's and variable frequency drives. Hours: 6pm to 6am Pay is up to $45 an hour with fantastic 401K match, benefits, bonus, and paid vacation time. Job Tasks Perform instrumentation and electrical maintenance functions which include but are not limited to the following: Follow all APNA safety guidelines and procedures; plan safety into projects and tasks Continuously work to improve the safety and efficiency of operations Promotes a safe work environment for self and others Follow all APNA safety guidelines and procedures; plan safety into projects and tasks Preventative Maintenance and repair of all processing and support equipment Demonstrates initiative by proactively addressing communications and other issues Works with contractors during equipment repairs and improvements Operate PIV equipment (forklifts, scissor lift, articulating boom truck, portable hoist, cherry picker, etc.) Document repairs / PM's with eMaint system Maintain a clean and professional work area Functions with minimal supervision in a teamwork orientated environment Ability to interpret and update electrical drawings Troubleshoot and maintain complex equipment controls systems up to 480v Train other maintenance personnel on I&E systems and personal areas of expertise Adhere to arc flash safety standards Advanced Electrical and Mechanical Preventative Maintenance and repair of all processing and support equipment Qualifications (Education, Experience, Licensures, and Certifications) Minimum: High school diploma with ten years related work experience Preferred: Technical school training or equivalent with five years related work experience Required Skills Advanced electrical troubleshooting proficiency Program Variable frequency drive systems Interpret and edit PLC controls systems Work Environment / Physical Demands / Travel Stands and walks most work hours Must be able to work at heights up to 30 feet, lift and carry up to 50 lbs., climb ladders, bend and twist in order to reach remote equipment #LI-MG1 As an equal opportunity employer, Asahi Kasei believes a diverse workforce will provide us with the ability to continuously support the changes in the economy, society, and environment.

Job Description LJ Inc. is a leader in providing cutting-edge industrial, commercial, and residential turn-key solutions and dedicated to delivering exceptional services to our valued customers. With a strong commitment to innovation, quality, and customer satisfaction, we have established ourselves as a trusted name in the industry. Our team is comprised of talented professionals who are passionate about what they do. We believe in providing our employees with the necessary tools, resources, and support to excel in their roles and reach their full potential. At LJ Inc, we strive for excellence in everything we do. We embrace new technologies, methodologies, and industry trends to stay ahead of the curve. Our commitment to continuous improvement and customer satisfaction sets us apart and drives our success. Join our team and become part of a company that values your skills, knowledge, and contribution. Job Summary: The Electrical Support Technician will be responsible to work within a project team to provide controls hardware and software support to customers through mainly remote access from LJ Headquarters. This technician will be part of a team of controls engineers having the primary goal of maintaining customer satisfaction. LJ is a growing company with many opportunities for expanding personal knowledge and position in the company. Multiple positions exist at different experience levels. Pay is based on experience level. This is a full-time, on-site position. Essential Job Functions: Remotely troubleshoot running customer electrical control systems through remote access and related controls software such as Rockwell Automation Studio 5000. Support onsite technicians in their ability to troubleshoot customer systems through remote access. Work with a development team to learn new control designs prior to being installed in the field. Provide support for new designs in testing new cabinets prior to installation. Follow company processes and controls work level instructions for maintaining good software revision control and programming styles. Controlled code incident management with minimal impact to customer's production. Qualifications: To perform this job successfully, an individual must be professional, proactive, and positive. Having a passion for exceptional customer service and support is a must. Being sensitive to the unpredictable demands and uncertainties associated with customer service is a requisite to delivering superior results and exceeding the expectations of very demanding customers. Ability to read electrical prints on paper or in AutoCAD. Functional electrical maintenance and troubleshooting skills. Competence in industrial machinery controls design. PLC/HMI programming experience with an emphasis on Rockwell Automation. Experience with different fieldbus architectures with an emphasis on Ethernet/IP and general networking knowledge. 1 year of controls, or electrical experience, and 1 year of plc programming experience The following software experience is a plus: AssetCentre Studio 5000 RSLogix 500 RSLogix 5 Factory Talk View ME Factory Talk View SE AutoCAD VMWare Workstation Networking Experience: VPN VNC RSlinx or FactoryTalk Linx What we offer: Competitive compensation 100% company paid health insurance for employee and dependents 100% company paid dental and vision for employee and dependents 401k with 3% company match Overtime after 8 hours PTO and vacation time And much more! Job Posted by ApplicantPro

Joining the Metallus team means becoming part of a legacy that dates back over a century. We are an industry leader, manufacturing the cleanest steel in the world for companies in the industrial, aerospace and defense, automotive, and energy markets. Relocation will not be offered for this position. Purpose and Scope: Technicians are system experts that provide advanced and specialized knowledge, skills, and consultation that ensure successful installation and restoration of key operating equipment for the multibillion dollar steel business. This role is directly responsible for ensuring that the manufacturing equipment, with varying complexity, operates according to design standards that enable manufacturing specifications, which have a direct impact to the product characteristics, to be achieved. Technicians are the next (higher) level of reliability support once the skills of maintainers have been exhausted. This position will be required to work on call and/or overtime as per business needs. Responsibilities: * Design, analyze, and engineer solutions with other technicians, engineers, and other groups. * Responsible for analyzing, decoding, and making small PLC program modifications which would include schematic reading and drawing. * Investigate, diagnose, test, calibrate, install, repair and perform preventative maintenance on electronic and electromechanical equipment and systems throughout the plant, to ensure optimal asset utilization. * Provide advanced or specialized knowledge, skills and tools to restore equipment operation and process integrity. * Provide support to maintainers, operators and engineers to correct malfunctions, enhance performance and promote continuous improvement. * Responsible for ensuring that the manufacturing equipment, the complexity of which varies significantly from manual to state of the art/highly automated, operates according to the specified design standards. Optimal operation is critical to the products quality and manufacturing characteristics. * To coordinate and plan for the repair of all electronic equipment removed from the field due to malfunctions or defects. This includes tracking status of repairs, assessing the quality of the repairs, and maintaining stock of spare parts. * Responsible for continuous learning and development of work skills and technical through attendance of training classes with vendors, online, and on the job training. * Responsible for the successful installation, testing and commissioning of new capital equipment. * Liaison and interface with suppliers, vendors, contractors, OEMs, and other parties to properly select and repair equipment and quickly rectify problems. * To effectively perform and complete all assigned project work efficiently, on time and safely within a fast paced work environment. Technical/Functional Skills: * Basic knowledge of AC/DC circuit analysis and AC/DC drives * Basic knowledge of hydraulic and pneumatic systems * Working knowledge of electrical systems, instrumentation, sensors, test equipment, PLCs (hardware and software programming) Minimum Requirements: * High school diploma with at least 5 years of an industrial/electrical apprenticeship or industrial/electrical experience (experience in manufacturing preferred). Preferred Requirements: * Associate's degree in electrical technology or related with 2 years of industrial/electrical experience (experience in manufacturing preferred). The company prohibits harassment or discrimination against any employee on the basis of any status protected by law, including, but not limited to, race, religion, color, national origin, ancestry, age, disability, genetic information, gender, sex or veteran status.

LJ Inc. is a leader in providing cutting-edge industrial, commercial, and residential turn-key solutions and dedicated to delivering exceptional services to our valued customers. With a strong commitment to innovation, quality, and customer satisfaction, we have established ourselves as a trusted name in the industry. Our team is comprised of talented professionals who are passionate about what they do. We believe in providing our employees with the necessary tools, resources, and support to excel in their roles and reach their full potential. At LJ Inc, we strive for excellence in everything we do. We embrace new technologies, methodologies, and industry trends to stay ahead of the curve. Our commitment to continuous improvement and customer satisfaction sets us apart and drives our success. Join our team and become part of a company that values your skills, knowledge, and contribution. Job Summary: The Electrical Support Technician will be responsible to work within a project team to provide controls hardware and software support to customers through mainly remote access from LJ Headquarters. This technician will be part of a team of controls engineers having the primary goal of maintaining customer satisfaction. LJ is a growing company with many opportunities for expanding personal knowledge and position in the company. Multiple positions exist at different experience levels. Pay is based on experience level. This is a full-time, on-site position. Essential Job Functions: Remotely troubleshoot running customer electrical control systems through remote access and related controls software such as Rockwell Automation Studio 5000. Support onsite technicians in their ability to troubleshoot customer systems through remote access. Work with a development team to learn new control designs prior to being installed in the field. Provide support for new designs in testing new cabinets prior to installation. Follow company processes and controls work level instructions for maintaining good software revision control and programming styles. Controlled code incident management with minimal impact to customer's production. Qualifications: To perform this job successfully, an individual must be professional, proactive, and positive. Having a passion for exceptional customer service and support is a must. Being sensitive to the unpredictable demands and uncertainties associated with customer service is a requisite to delivering superior results and exceeding the expectations of very demanding customers. Ability to read electrical prints on paper or in AutoCAD. Functional electrical maintenance and troubleshooting skills. Competence in industrial machinery controls design. PLC/HMI programming experience with an emphasis on Rockwell Automation. Experience with different fieldbus architectures with an emphasis on Ethernet/IP and general networking knowledge. 1 year of controls, or electrical experience, and 1 year of plc programming experience The following software experience is a plus: AssetCentre Studio 5000 RSLogix 500 RSLogix 5 Factory Talk View ME Factory Talk View SE AutoCAD VMWare Workstation Networking Experience: VPN VNC RSlinx or FactoryTalk Linx What we offer: Competitive compensation 100% company paid health insurance for employee and dependents 100% company paid dental and vision for employee and dependents 401k with 3% company match Overtime after 8 hours PTO and vacation time And much more!

Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management. Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world's most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. The Mechanical Maintenance Technician Lead works alongside and guides the Maintenance Technicians in their daily routines and duties as needed. At times, they will work independently performing maintenance activities. Along with the Instrument & Controls Lead, this position prioritizes preventative maintenance and other repair activities. This role maintains and leads the shift to the highest standard regarding professional attitude toward work and safety. Ensures that equipment, machinery, general repairs, installation of new equipment/systems and preventative maintenance programs are carried out efficiently and properly. Key Characteristics: ● Ability to apply to carry out instructions furnished in written, oral, and diagram form ● Ability and willingness to read documents and implement such as safety rules, operating and maintenance instructions, and procedure manuals ● Ability to work independently with minimal supervision ● Accountable, reliable and thorough ● Computer proficient ● Leadership traits and skills ● Problem solving skills Key Responsibilities: ● Assists and works alongside the Maintenance Technicians in performing proper diagnosis of any malfunctioning machinery, general repairs, installing new equipment and systems and preventative maintenance programs on all assigned machinery. ● Installs or directs the installation of new equipment or rearranges existing equipment ● Maintains an inventory of spare parts ● Is available on call for emergency repairs as needed to keep plant in good running order ● Leads by example and practices good safety procedures in order to keep self and others injury free. Follows EHS policies and procedures. ● Performs and/or directs preventative maintenance on plant facilities and equipment as well as Mobile/Service DI water treatment equipment. ● Provides leadership to the Maintenance staff and directs the maintenance operations during the shift. Knowledge, Skills & Abilities Preferred: ● Associate's Degree in electrical, industrial / mechanical, engineering, or water treatment disciplines ● Minimum of 3 years of Electrical install, repair, and maintenance work experience to include electronic troubleshooting, PLC programming, and 480V 3 Phase electrical repair and maintenance experience ● Trade school experience for electrical, plumbing, carpentry, and/or mechanical repair is highly desired The job description is not designed to capture all the employee's responsibilities but is intended to capture essential functions of the role. Responsibilities may change over time and may be assigned at any time. Qualifications Education & Experience Required: ● HS Diploma, GED or equivalent. ● Minimum of 2 year mechanical repair and maintenance work experience ● Minimum of 1 year experience in a shift lead role ● Possess a valid driver's license and clean driving record history Preferred (if applicable): ● Associate Degree or Trade School Certificate in Mechanical / Industrial Maintenance ● 5 year mechanical repair and maintenance work experience ● 3 year experience in a lead role Additional Information Working Conditions ● Ability and willingness to perform physical duties such as lifting, climbing, working at elevated heights, and manual dexterity ● Ability and willingness to work in range of environments to include but not limited to industrial facilities, manufacturing facilities, and power industry facilities Around the globe, we help cities and industries manage, optimize and make the most of their resources. We provide an array of solutions related to water, energy and materials to promote a cleaner more sustainable world for all of us. The collective expertise and passion of our people, combined with a broad portfolio of over 10,000 technologies, makes us uniquely positioned to deliver solutions that positively impact the environment. Come be part of something special - start your journey today! What We Offer: ● Competitive pay and opportunity for advancement. A place to build a career! ● Training in valuable skills ● Great benefits including retirement plans ● Opportunity for new challenges. We're growing! ● Strong leadership team! As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Performs a broad range of activities related to traffic engineering including conducting joint field layouts with signal contractors and utility companies for traffic signal and overhead sign installations. Inspects more difficult or extensive road and signal projects involving Federal Aid Funding, requiring accurate and detailed recordkeeping, subject to audit. Inspects work by contractors to ensure proper methods, procedures and materials are used during installation (including troubleshooting). Prepares and distributes accurate Traffic Signal paperwork for field installations. Provides direction and coordinates the work of other inspectors (including third party contractors) when required. Calculates volumes and areas of complex shapes. Performs inspection on traffic signal installation and modernization work done by contractors. Keeps accurate records of contractor work. Lays out, programs, troubleshoots and maintains vehicle detection systems. Attends meetings as required by supervision. Must perform duties in a professional and courteous manner to promote a positive image of the Road Commission for Oakland County. Requires a daily schedule that supports RCOC hours of operation. Regular and predictable on-site job attendance is an essential function of this position. Special Experience/Education A high school diploma or equivalent, with additional technical training in mathematics, electricity/electronics which would normally be acquired in the first year of college or technical school, is required. Knowledge of Field Manager, AASHTOWare, Bluebeam and Microsoft Office are preferred. Availability and willingness to work overtime as required. A minimum of 1 year of experience commensurate with the duties described above is required. Must possess and maintain a valid State of Michigan Driver's License. Disclosure This position is within a bargaining unit and the individual that holds this position is subject to the terms and conditions of the existing collective bargaining agreement. Disclaimer Must be legally eligible to work in the United States and possess a valid driver's license. Attractive benefits package EOE/ADA/Drug Free Workplace

Job Title: Electrical Technician Job Type: Full-Time | Non-Exempt Hourly Rate: $18-$25, depending on experience We are seeking an experienced Electrical Technician to join our production team. This role involves assembling, wiring, and fabricating electrical components and instrumentation panels for industrial equipment. The ideal candidate is detail-oriented, skilled with electrical and mechanical systems, and able to read and interpret technical drawings. Key Responsibilities: Manufacture quality products according to customer specifications and internal build procedures. Participate in electrical and related fabrication processes as part of a team. Analyze work orders and build sequences; interpret specifications, shop drawings, and construction notes. Assemble instrument gauge panels, electrical conduit/cable trays, wiring assemblies, wire-pull, and terminations. Join conduit and tubing using compression fittings, threading, bolting, or other mechanical methods. Ensure completion of inspection records, red-lined drawings, punch lists, and BMS updates prior to quality inspection. Recommend and implement process improvements to enhance production efficiency and product quality. Follow and enforce all established safety policies and procedures. Perform additional duties as assigned by the supervisor. Skills & Qualifications: Proficient in advanced shop math. Mechanical aptitude and ability to use trade-related tools and equipment. Ability to read technical drawings and use measuring tools (micrometers, calipers, tape measures). Capable of lifting 25-50 pounds and working in a shop environment. Strong written and oral communication skills. Benefits: Health, vision, dental, and life insurance with employer contribution. Short- and long-term disability coverage. Retirement plan with employer contribution. Paid time off including holidays, vacation, and personal days. Tuition reimbursement and opportunities for professional training and certifications.

Job DescriptionDescription: At Hoover, we're more than just a home services company - we're a community. Where we are proud to be a trusted local business that's rapidly growing; thanks to our commitment to quality work, exceptional employee satisfaction, ongoing support and training we offer our team. We're looking to continue our growth by adding a new Residential Service Electrician who is both skilled and customer focused! At Hoover - where we take care of our employees like family and deliver the quality our community depends on. You get more than just a paycheck you get the chance to take your career to the next level. What's in it for you? Competitive Pay: $27-37/Hour DOE Comprehensive Benefits Package: Medical Dental Vision Prescription Life Insurance Short Term/Long Term Disability Coverage Employee Assistance Program (EAP) NB Fitness Discount 6 Paid Holidays Paid Time Off + Vacation Biweekly Pay! Consistent Weekly Work Schedule Company provided: Gas Card, Truck, iPad and Uniforms Ability to dispatch from home! Company match 401K Retirement Plan Ongoing Weekly Training - Enhance your sills both technically and professionally. What you'll accomplish: While technical expertise is essential, success in this role is defined by your ability to build trust with homeowners, communicate clearly, and offer smart, value-driven solutions that improve safety, efficiency, and long-term system performance. Diagnose, troubleshoot and repair residential electrical issues with precision and efficiency Educate homeowners on technical findings, recommended solutions, and potential associated costs. Conduct full-home safety inspections (60-90 minutes) to identify hidden issues or safety concerns Proactively recommend upgrades or preventative improvements (e.g., wiring replacement, circuit panel upgrades, GFCI outlets, surge protection) Prepare detailed quotes and service invoices using company software (Service Titan) Participate in training sessions to strengthen your technical expertise and customer communication skills What Success Looks Like: Complete 3-4 service calls per day 70%+ conversion rate on recommended repairs or upgrades Deliver thorough and insightful whole-home safety inspections on each visit (60-90 minuets) Actively promote and contribute to membership plan sales Consistently keep monthly call-back rates low through quality workmanship Build strong relationships with homeowners and deliver 5-star customer experiences Traits we admire: Professional: Proven customer service skills with the ability to explain complex issues in simple terms Coachable: You are a high energy and are driven to seek continuous improvement A teammate: you enjoy working in small teams, building relationships, and supporting others Quality focused: Solid diagnostic and problem-solving skills Customer-first mindset: you love helping people, and have a commitment to doing the job right the first time Entrepreneurial: Willing to ask for the business Requirements: State-issued Apprentice or Journeyman Card 4+ years of experience in Electrical Work 1-2 years of residential electrical service experience (more a plus) Valid driver's license with a clean driving record Experience using Service Titan or other service management software preferred