Maintenance electrician jobs in Indiana

Responsibilities: Oversees, plans and issues work orders to appropriate shift team members for the implementation of equipment modifications as well as preventative and any corrective maintenance. Work closely with manufacturing departments to ensure production equipment is maintained on a consistent basis and all PM schedules are met in a timely fashion. Prepares and coordinates maintenance resources and provides recommendations for capital and continuous improvement projects. Reviews the operation of equipment with appropriate personnel to identify maintenance issues in the areas of Safety, Quality, Cost, Productivity and Customer Satisfaction. Tracking and improving machine downtime, increasing machine reliability that supports manufacturing to meet customer demand. Ensure compliance to all health and safety policies and that all equipment is properly safeguarded. Develop and implement maintenance procedures that are trackable and accountable to ensure maximum efficiency of the maintenance department. Manage relationships with contractors and service providers. Tracks, analyzes, and improves the Maintenance department's KPIs. Review the location's Key Performance Indicators KPIs (Daily, Weekly and Monthly) to make recommendations for improving plant operations, OEE (Overall Equipment Effectiveness) and maintenance problem resolution. Engages employees in problem resolution to improve production issues/efficiencies utilizing Lean Manufacturing techniques as needed. Fosters a positive working environment and drives the Maintenance team to meet set productivity targets and performance standards. Monitors and reviews Maintenance budget monthly: Prepares and implements annual budgets. Ensures all regulatory compliance with various governmental agencies such as city, county, state is met on a consistent basis. Drive cost savings through equipment repairs, upgrades, improved PM's, decreased cycle time, etc. Ensures Maintenance employees are properly trained in all aspects of their jobs. Identifies training gaps and develops training plans as needed. Maintains facility compliance with all municipal, state/provincial, and federal fire and safety codes, including the testing/inspections of the fire protection system. Performs other duties as assigned. Requirements: Must have strong interpersonal skills. Bachelor's degree in engineering or operations management. Prefer Valid Certified Maintenance Manager (CMM). Possess 10+ years of experience in Industrial Automation, PLCs, Pneumatics and Hydraulics, Injection Molding preferably in the Packaging Industry. Leadership experience in operations, maintenance, engineering and/or process improvement roles including managing teams of people. Previous experience working in a Lean environment preferred. Six Sigma Green or Black Belt Certification a plus. Solid understanding and knowledge of all OSHA guidelines pertaining to plant maintenance. Exceptional leadership and proven team-building skills. Excellent analytical thinking and innovative problem-solving skills. Ability to multi-task and prioritize in a fast-paced environment. Microsoft Office proficiency and SAP knowledge preferred. Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Benefits: Not Applicable

Country: United States of America Carrier is the leading global provider of healthy, safe and sustainable building and cold chain solutions with a world-class, diverse workforce with business segments covering HVAC, refrigeration, and fire and security. We make modern life possible by delivering safer, smarter and more sustainable services that make a difference to people and our planet while revolutionizing industry trends. This is why we come to work every day. Join us and we can make a difference together. About this role: Under general supervision, maintain and repair both electronic and electro-mechanical designed systems. Typical equipment for repairing includes analog and digital meters, electronic safety devices, welding controls systems, control panels, motor speed controllers and all other electronic systems. Electrical work involving layout, installation, maintenance and repair of light, test, power, and automatically controlled circuits of standard design. Perform such duties as work involving trouble diagnosis. KEY RESPONSIBILITIES: Perform repairs on equipment as defined above by diagnosing faults and making actual repairs, readjustments, or calibrations Typical equipment used is multimeters, oscilloscopes, hand, electrical, or soldering tools as used in this trade Perform preventive maintenance on equipment per instructions and schedules established by supervision Lay out construction wiring and install and maintain electrical circuits for machine installations, conveyors, elevators, cranes, etc Perform expert troubleshooting and wiring of electrical circuits Maintain and repair AC and DC motors and control equipment Install conduit and bus-bar and general wiring Maintain clean and safe work areas Replace unit components such as gas valves, control relays, protective relays, fan and blower motors, fuses, EAC compressors, etc. Assist other Maintenance Department employees and perform related or less skilled work Follow all site safety rules specific to their position, as seen in the associate handbook, cardinal rule cards, job-specific standard work and any EHS training documents Report all chemical spills and other environmental concerns to their supervisor, security, or EHS immediately Required Qualifications: High School Diploma / GED Must possess a Journeyman card or ability to pass the onsite electrical examination 3+ years' experience working from wiring diagrams, schematic drawings and/or piping schematic drawings 1+ years' experience with electrical codes and requirements 1+ years' experience tracing electrical circuits, and testing voltage Preferred Qualifications: Associate's degree Excellent verbal and written communication skills Strong teamwork and collaboration skills Strong organizational skills Excellent attention to detail and accuracy RSRCAR #LI-On-Site Carrier is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. Carrier provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice

Direct Hire 💲 Pay Rate: $37.91/Hourly $78852.80/Annually 🕒 Shift: Weekly Roating Shifts: (Unless OT is needed) 📅 Schedule: 1st week: 6:30am-2:30pm 2nd week: 2:30pm-10:30pm 3rd week: 10:30pm- 6:30am Primary Function: To inspect, repair, replace, install, adjust and maintain all electrical equipment in the plant. Makes mechanical repairs to cranes, and as otherwise required in connection with electrical service. Tools and Equipment: Drill press, power saw, chain fall, burning and welding equipment, portable drill grinder, safety devices, miscellaneous electrical testing equipment and hand tools, etc. Materials: AC and DC equipment, such as cranes, furnaces, machine tools, motors, generators, controls, switches, circuit breakers, transformers, control panels, lighting circuits, wire, tape, insulation, repair parts, etc. Source of Supervision: Foreman. Performs work with a minimum of direction. Direction Exercised: Works alone or directs Helpers. Working Procedures: Receives instructions covering the scheduled and emergency repair, installation and inspection work to be done. Answers signal for electrical maintenance. Inspects all electrical equipment in the plant, checking motor bearings, lubrication, commutation, excessive vibration, obvious signs of wear or need for adjustment, etc. When faulty operation is observed or pointed out by operating crews, diagnose trouble using testing equipment or own judgment based on general knowledge of electrical principles. Determines the best way of making repairs to minimize interruption of production. Advises when immediate shutdown of equipment is necessary to minimize damage or when temporarily continued operation will have no harmful effect. Interpret and analyze drawings and wiring diagrams to locate and trace electrical circuits to determine material and replacement needs and to select a logical approach to "trouble shooting " and repair problems. Dismantles, cleans, repairs, replaces, installs, maintains, assembles and lubricates electrical equipment taking all safety precautions. Adjusts equipment to obtain proper operating characteristics. Experience with PLCs for Troubleshooting Most work is done deenergized, with the exception of troubleshooting machine issues. Most voltages range from 24VDC to 480AC. Makes either temporary or permanent repairs as required to equipment, such as main motor drives, generators, control panels, relays, interlocking control systems, electronic devices and circuit breakers. Makes mechanical and electrical repairs on cranes. Makes mechanical repairs as required in connection with the servicing of electrical equipment. Occasional confined space work. Lock out Tag Other duties: Erects scaffolds and performs simple rigging as required. Operates small machine tools, such as drill press, power saw, etc. Checks air compressor for proper operation. May start, stop or adjust compressor. Occasionally, may operate crane as required to check condition or to make miscellaneous lifts in the absence of the craneman. May make emergency, minor mechanical repairs in the absence of other maintenance personnel. Occasionally performs simple burning or welding pertaining to his work. Occasionally may install conduit in connection with electrical maintenance. Maintains clean and orderly working area. Cleans up after repair or installation is completed. Requirements: Associate's Degree with relevant work experience 7+ years' experience equivalent to a Journeyman certification Preferred: Journeymen Certification

The Industrial Electrician job is a core component for our maintenance forces and requires a trained and experienced individual to continue our success as one of world's largest steel producers. The Industrial Electrician performs all electrical maintenance functions necessary to maintain all operating and service equipment using standard and specialized tools and equipment including mobile equipment, pendant and overhead cranes and forklifts. As an Industrial Electrician, you will install, maintain, repair, and operate a broad range of electrical systems and electrical equipment in a heavy industrial environment to maintain continuous operations. Responsibilities: Troubleshoot, install, maintain, and repair a broad range of electrical and electronic systems and equipment using schematics, AC/DC systems, and PLC's. Provide assistance in operating functions as necessary. May work alone with minimal supervision or with other maintenance technicians. Work in various areas of the plant locations is required. Dependent upon the area, environmental conditions can be hot, cold, dirty, greasy, wet, and noisy. Requirements: Must pass assessment test(s) High School Diploma or GED A minimum of 1 year of manufacturing and/or industrial experience (including relevant experience gained in military service) or equivalent education. This includes experience in any of the following: industrial electronics, motors and controls, schematics and electrical power, print reading, computers and PLC's, electronics, AC/DC theory, power, test instruments and instrumentation, electrical maintenance, commercial construction and installation. The position requires rotating 8-hour shift work, which will include Saturdays and Sundays, and holidays. The position requires overtime work as needed. Adherence to safety procedures/guidelines always. Safety is our core value which requires you to wear safety protection such as hard hats, safety glasses, hearing protection, protective clothing, and boots with metatarsal protection. The position requires punctuality, consistent attendance, and self-direction for the success of the operations. Company Overview Since 1901, U. S. Steel has been a recognized leader in steel production. Today, as the first North American steel company to have declared a 2050 net-zero greenhouse gas emissions goal, we remain as innovative as ever, leading transformation across our industry while continuing to make products for everyday life - from industries as far ranging as automotive, construction, containers and packaging, appliances, and energy. Underneath it all is our Culture of Caring, which shows up in our community partnerships, charitable contributions, company-sponsored employee volunteer initiatives, scholarship programs, leadership training, and much more. And of course, it takes shape in a steadfast commitment to safety first in our workplaces and respect for our employees, who are United by Steel. We are honored to have earned accolades and awards from well-regarded organizations, including the following: Ethisphere's World's Most Ethical Companies 2022, '23, '24 Disability: IN's Best Places to Work for Disability Inclusion 2021, '22, '23, '24 Human Rights Campaign Foundation's Equality 100 Award 2020, '21, '22, '23-24, '25 Military Times' Best for Vets: Employers 2023, '24 Conducting business with integrity and with the highest ethical values has underpinned U. S. Steel's success for over 100 years, and it remains critical to our company's success in the future. U. S. Steel is an Equal Opportunity Employer. It is our policy to provide equal employment opportunity (EEO) according to job qualifications without discrimination on the basis of race, color, religion, ancestry, national origin, age, genetics, sexual orientation, sex, gender identity, disability status or status as a protected Veteran or any other legally protected group status. (California residents may visit ************************ regarding collection of personal information and U. S. Steel's privacy practices.) Competency Summary At U. S. Steel all employees are expected to display the following core competencies every day to advance corporate, team and individual goals: Think: Think Critically and Drive Change Lead: Develop Talent and Collaborate Do: Empower Performance and Deliver Results

We are looking for a skilled and safety-conscious Industrial Electrician in the commercial setting to join our team. In this role, you will be responsible for servicing, maintaining, troubleshooting, and repairing electrical systems in commercial buildings, industrial facilities, warehouses, plants, and other non-residential settings. You will ensure all electrical work is completed in compliance with applicable codes and standards, while minimizing downtime for clients and maintaining high safety and quality standards. **5-10 years of experience as a commercial and/or industrial service electrician**

Aegis Worldwide is seeking an experienced Maintenance Manager to lead industrial maintenance operations and ensure peak equipment reliability, facility efficiency, and team performance. This is a hands-on leadership role ideal for someone with expertise in preventive maintenance, facilities management, equipment maintenance, and mechanical/electrical systems. Key Responsibilities: Manage daily maintenance operations for production equipment and facility systems, including Fresh Pack equipment, overhead doors, lighting, plumbing, and HVAC. Lead, mentor, and provide technical guidance to maintenance supervisors, shift teams, and support staff. Oversee preventive maintenance programs, parts inventory, and cost-containment initiatives. Troubleshoot and optimize hydraulic, pneumatic, mechanical, and electrical systems. Plan and execute capital projects, equipment upgrades, and facility improvements. Track and report equipment downtime, repair costs, and future maintenance projections. Qualifications: 4-year technical degree or equivalent; certifications in Electrical, Boilers, Hydraulics, Welding, OSHA, or Wastewater Treatment are a plus. 10+ years of experience in industrial maintenance, facilities management, project leadership, or preventive maintenance. Strong proficiency in Microsoft Office, AutoCAD, and CMMS software. Hands-on expertise in mechanical, electrical, hydraulic, and pneumatic systems. Excellent leadership, problem-solving, and communication skills. Why Join Us: Lead a skilled maintenance team of 25-35 professionals. Make a measurable impact on equipment reliability, operational efficiency, and safety. Hands-on role with opportunities for project leadership and career growth. Flexible schedule with occasional remote leadership availability. Relocation assistance provided.

At The Stratford we are proud to be recognized as a Great Place to Work , and we believe that our success begins with one simple principle: People First. We are a luxury senior living company that is driven by compassion, respect, and the dedication to making every interaction meaningful. Our culture fosters growth, teamwork, and a genuine commitment to enriching the lives of our residents and our team members. If you are passionate about providing exceptional care in an environment where you're valued and supported, we invite you to be part of a company that truly puts people at the heart of everything we do. Come join us and be a part of something extraordinary! Now accepting applications for a Maintenance Tech I. Ideal candidate has experience in a similar property maintenance position. POSITION SUMMARY: Maintenance Tech I assists all maintenance personnel in the short term, preventative and emergency maintenance programs for the buildings, grounds and equipment at the campus. Responsibilities will include the completion of all assigned work orders and maintenance projects under the supervision of the Director of Facility Services. ESSENTIAL FUNCTIONS: Represents the campus in a positive manner while creating an environment that fosters respect and courtesy for residents and employees alike. Works within the campus programs to encourage and promote safety and the well-being of all residents and employees. Upholds the Company's Mission Statement. Maintains HIPAA standards and regards all medical or healthcare information pertaining to residents and employees as confidential. Restores vacant units to “like new” condition (including but not limited to the stripping of walls and flooring, repainting surfaces, removing carpet, replacing glass and windows, patching sheetrock, cutting and replacing interior and exterior trim, hanging doors, and replacing fixtures. Performs maintenance repairs on the equipment, buildings and grounds, as needed. This will include but is not limited to installation, modification, cleaning, and repairs of wood, metal and stone structures, appliances, utility supply lines, irrigation systems, plumbing lines and fixtures, security systems, HVAC equipment, electrical components, switches, light fixtures, safety equipment, elevators, etc. Assists in the success of the preventative maintenance programs (hereafter known as PM) set up by the campus which will include but is not limited to PM on elevators, fire extinguishers, HVAC units, appliances, emergency generators (if applicable), and water temperatures. Logs all information in specified books, software or charts. Assists in the installation, repair, cleaning, or modification of therapy pools, swimming pools, therapeutic baths, or any corresponding equipment. 8. Removes all trash located in the collection areas of the campus. 9. Checks shipments and deliveries from vendors. Contacts and corresponds with vendors, contractors, associates, and corporate office team as needed. OTHER DUTIES AND RESPONSIBILITIES: Travels occasionally for training sessions, continuing education opportunities, emergency situations, and other company functions. Responsible for knowledge of fire and safety procedures including those involving blood-borne pathogens. Remains in proper uniform at all times and maintains a high standard of appearance. Completes all work orders in a timely manner. Maintains excellent resident and employee relations. Handles complaints and recommendations constructively. Attends employee in-services as required. Interacts well with marketing tours and prospective residents. Is available for on-call situations on a regular rotating and emergency basis. Accepts other duties as required by the Director of Facility Services. Occasionally, you will be required to operate a vehicle of either your own or company-owned for designated company purposes or facilitate resident/member needs and/or requests. REQUIREMENTS: A. Education - High school graduation or GED required. - Technical training in mechanics, electrical, plumbing, landscaping, or HVAC desired. B. Direct Previous Experience - Mechanical or maintenance experience required. - Two years experience in painting and housing / commercial refurbishment desired. - Two years experience in a similar maintenance position desired. C. Skills: - Ability to work with minimal supervision. - Must conduct all business with a professional manner and with a high level of confidentiality. - Ability to use hand tools, automatic / electrical machinery, carts, and dollies. - Thorough knowledge of MSDS (Material Safety Data Sheets) and OSHA compliance. - Ability to exhibit efficient computer skills. - Basic knowledge of swimming pools and swimming pool maintenance. - Must have a valid driver's license and satisfactory driving record as specified by the Company and by the Company's automobile insurance carrier. D. Abilities: - Work outdoors and indoors during the work day (fluorescent lights, HVAC system, carpeted flooring, normal office noise levels). - Climb up to two flights of stairs. - Ability to climb extension ladder up to and above roof height. - Lift objects of 25 pounds or less over the head. - Move objects of 100 pounds or more. - Ability to swim at least 25 yards. - Ability to work under time-sensitive or stressful situations. - Respond to medical emergencies on a rare occasion. - Assist with resident evacuations, if ever required #SLC2 #TA3

At The Gund Company (TGC), we pride ourselves on maintaining a high standard of excellence in everything we do. Our team is dedicated to providing top-notch services and ensuring the smooth operation of our facilities. TGC is a manufacturer and fabricator of engineered material solutions specializing in customized electrical insulation parts. With 16 facilities worldwide, we specialize in custom fabricated parts manufactured according to ISO 9001:2015 certified quality systems. We take a consultative, engineering approach to understanding customer needs and have a reputation for outstanding customer service and quality. Job Summary: As an experienced Industrial Maintenance Technician, you will play a crucial role in maintaining and improving our facilities. You will be responsible for performing routine maintenance tasks, troubleshooting issues, and ensuring that all equipment and systems are functioning optimally. Your expertise will help us maintain a safe and efficient working environment. Key Responsibilities: Perform routine maintenance and repairs on equipment and systems, including HVAC, plumbing, electrical, and mechanical systems. Troubleshoot and diagnose issues to determine the best course of action for repairs. Conduct regular inspections to identify potential problems and address them proactively. Maintain accurate records of maintenance activities and repairs. Collaborate with other team members to ensure timely completion of maintenance tasks. Adhere to safety protocols and regulations to ensure a safe working environment. Valid driver's license. Occasional “off hours” may be required as driven by business need. Other duties may be assigned. Requirements 5 or more years of proven experience as a Maintenance Technician or in a similar role. (Associate's degree (A.A.) or equivalent from a two-year college or technical/trade school plus 3+ years' experience). Strong knowledge of HVAC, plumbing, electrical, and mechanical systems. Excellent troubleshooting and problem-solving skills. Ability to read and interpret technical manuals and blueprints. Strong attention to detail and a commitment to quality work. Excellent communication and interpersonal skills. Ability to work independently and as part of a team. Relevant certifications or licenses are a plus. What We Offer: Opportunities for professional growth and development. A supportive and collaborative work environment. The chance to work with a dedicated and skilled team. A safe and healthy work environment Paid Time Off (PTO) and Paid Holidays Comprehensive, cost-effective employee benefits: Health, Dental, Vision, Life, and Disability 401(k) retirement savings program with 50% employer match (up to 6% of contributions) ESOP (Employee Stock Ownership Plan) - The Gund Company is 30% employee-owned - Shares are awarded each year based on profitability with no out-of-pocket investment. Join a company that values your contribution and invests in your future. Apply today to start your career with The Gund Company! Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions of the position of an Experienced Industrial Maintenance Technician. EEO Statement: It is the policy of The Gund Company to recruit, hire, train, and promote employees without discrimination.

Knauf Insulation North America is the world's fastest-growing insulation manufacturer. We are wholly committed to the conservation of the environment while also sustainably developing and manufacturing a comprehensive line of acoustical fiberglass insulation for residential, commercial, industrial, marine, OEM and metal building applications, using post-consumer recycled materials. We welcome passionate and creative individuals who thrive in an entrepreneurial, collaborative and ever-changing environment. Pay Rate: $37.56/hour Up to a 5% quarterly bonus with a perfect attendance multiplier! We know how important your health, wellbeing, and financial strength is to you. To support you, we provide affordable benefits for you and your family members. "Supporting all aspects of the individual - self, health, wealth and community” Our benefits include: Offsite free clinic Medical Dental 401k - Knauf contributes 3% regardless of if you contribute Life Insurance Employee Assistance Program (EAP) Plus more! Growth opportunities available! Apply online or contact us to hear why our employees appreciate being part of the Knauf family! Responsibilities Use safe work practices and counsel other employees to do the same, as necessary. This includes understanding and complying with the lock-out/tag-out procedures, remaining current on plant and safety matters and participating regularly in department/plant safety meetings. Install conduit, wring and equipment with craftsmanship in a skilled and professional manner. Read and interpret electrical power distribution, control, ladder logic, piping and instrumentation diagrams. Install, commission, maintain, and troubleshoot A/C and D/C motor control equipment. Install, troubleshoot, and repair 3-phase 460V power distribution systems, 120VAC control systems, and low voltage DC control systems. Install, maintain, and troubleshoot PLC and computer-based control systems. Use computer skills and computer-related equipment to diagnose problems with production equipment. Maintain and troubleshoot combustion equipment including gas trains, automatic control valves, and other gas-fired equipment. Understand, maintain, and repair process control loops. Determine if production equipment needs to be repaired or services; coordinate machine downtime and repairs with production management. Take an active role in the requisitioning of parts/materials necessary for the continued operation of the plant. Perform preventative maintenance routines as scheduled and as needed. Communicate maintenance issues with other shifts to ensure continuity of operation. Read and record comments in both Maintenance and Production logbooks. Ensure housekeeping in the Maintenance Department is maintained to a safe level and that equipment, tools, supplies, etc. are properly stored at all times, as well as before leaving such area for breaks, meal times, and end of the shift. Maintain a safe, clean, and organized work area. Must be able to report to work on time and work all hours required of the job, including mandatory overtime; may be required to occasionally cover shifts other than the one for which hired. Perform other work related duties and projects as directed. Drives the highest levels of employee retention and engagement to ensure a sustainable workforce. Fosters a culture of innovation, collaboration, and accountability within the organization. Instills an environment of inclusion, where all employees feel that they can contribute and impact the company in a positive manner. Qualifications Education : High School Diploma or General Education Degree (GED) Experience: Minimum of five (5) years electrical experience working in a heavy industrial environment. Knowledge, Skills and Abilities: Proficient in various aspects of troubleshooting and machine repair Knowledge of proper and safe use of shop equipment and tools Knowledge of VFDs, A/C and D/C motor controls, and combustions systems Knowledge of NEC code book Ability to read and interpret ladder logic control schemes Ability to install, maintain, troubleshoot and repair 480V, 3-phase power distribution systems, PLC's, VFDs, A/C and D/C motor controls, and combustion systems Ability to observe safety and security procedures, report potentially unsafe conditions, and use equipment and materials properly Ability to perform basic math functions, including mental calculation of simple equations and/or fractions Ability to apply basic reading and writing skills Computer skills in MS Windows environment; proficient in PowerPoint and Excel It is the policy of Knauf Insulation to provide equal employment opportunities to all qualified persons without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status or any other protected characteristic prohibited by applicable law.

Facilities Maintenance Leader - Muncie, IN - Full-Time | Direct Hire We're partnering with a leading client in the Muncie area to find a hands-on Facilities & Maintenance Leader who will ensure the facility and equipment are operating safely and efficiently. This is a working leadership role with strong shop floor presence. 🛠️ What You'll Do: Maintain and repair machinery, equipment, and building structures Troubleshoot and perform planned maintenance on mechanical/electrical systems Inspect critical equipment for compliance with specs and safety standards Install and maintain wiring, lighting, HVAC systems Lead and supervise maintenance team ✅ What You Bring: 5+ years in Operations/Facilities/Maintenance 3+ years of leadership/supervision experience Strong electrical knowledge (schematics, inspections, tools, safety codes) Solid mechanical/electrical troubleshooting skills Must be a U.S. Citizen or Green Card holder (due to government licensing requirements) ⭐ Preferred: Aerospace industry experience (a plus!) Lean or Six Sigma certification Strong computer skills & blueprint reading Proven problem-solving experience Familiarity with Lean Operating Models If you're ready to lead with impact and keep operations running smoothly, we'd love to connect! 📩 Apply or message me directly to learn more.

Scope: Maintenance manager for liquid division will be leading all maintenance activities to ensure reliable operation of packaging, blending and CIP systems. The maintenance manager will oversee all aspects of maintenance including preventive maintenance, corrective maintenance, maintenance and shutdown scheduling, spare parts strategy, equipment reliability, technical training of asset care technicians and equipment re-design. Essential Duties and Key Responsibilities: Define propose and monitor the implementation of the company's maintenance and reliability objectives with key overall objectives of improving overall line efficiency and reducing unplanned downtime associated with breakdowns. Responsible for the maintenance/repair of all equipment in the liquid plants. Implement work processes and procedures related to maintenance including the management of PM and PdM programs. Train, develop and mentor maintenance employees to ensure future growth objectives can be accomplished. Includes troubleshooting, root cause analysis, and continuous improvement. Ensure maintenance function operates with clear and open communications. Key technical resources for the issue escalation, MOC and project design review processes. Promote a continuous improvement culture by developing processes to analyze data to solve reliability problems and reduce unplanned downtime using MTTF, PM frequency, FMEA and implementing reliability initiatives Ensure spare parts inventory is optimized and aligned to support operations objectives. Protect proprietary technology through approved and certified relationships with third party companies Develop and manage the annual maintenance budget. Manage all outsourced contractors as needed and all other duties as assigned. Qualifications: BS Degree in Engineering 10-15 years of progressive and diversified “Maintenance Management” with minimum of 5 years' experience in food and beverage manufacturing. Strong experience in Continuous improvement, lean manufacturing, TPM, maintenance programs, equipment installation, and automation. Interpersonal skills and track record of teamwork, leadership, adaptability, coaching, and taking initiatives. Ability to read electrical schematics, P&ID, construction drawings, and other related work documents. Familiar with maintenance program management, CMMS, GMPs, SOP's development Prior maintenance management experience Experience with high-speed packaging equipment required. Aseptic experience preferred. Ability to work in a fast paced, dynamic environment Strong ability to coach, lead teams. Possess visual acuity to document company records Physical Demands: Must be able to physically perform the functions of climbing, balancing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, talking, hearing, and repetitive motions Must be able to work seated using a computer and phone for long periods of time. Must be able to work extended hours, such as daily overtime and an occasional weekend Must possess visual acuity to document company records Continuous walking throughout plant and distribution center. Lifting up to 40 pounds

The fundamental purpose of this position is to identify requirements and ensure appropriate action is taken to meet the maintenance needs of various facility systems, such as HVAC, refrigeration, PLC, electrical, hydraulics and automation. This position is responsible for ensuring all equipment, facilities, and grounds are maintained and working in optimal condition to support production and safety. Essential Duties & Functions: Sets overall maintenance department goals, processes, and procedures to accomplish company objectives and KPIs Ensures all health, safety, and regulations are followed Creates and maintains a preventive maintenance system as well as procedures to keep day-to-day operations and equipment running efficiently and effectively Oversee Equipment Maintenance and Facility Maintenance departments Manage and execute facility maintenance program to include assessments, repair, and construction projects Maintain safe and clean work environment. Train personnel on processes and procedures. Plan the work and monitor performance - determine the techniques to be used and apportion the work among maintenance employees Analyze data, investigate issues, identify solutions, and recommend actions to improve KPI targets. Participate and make recommendations for developing and improving performance evaluations and interviewing candidates. Contribute to Godfrey cultural vision including but not limited to working in a positive fashion with teammates and leadership, taking initiative, and having ownership of work. Flexible, performs other duties as assigned Skills & Knowledge: Bachelor's degree in Engineering or equivalent related work experience Minimum of 7 years of experience leading maintenance teams in a manufacturing environment Strong organizational skills including attention to detail and multitasking skills Proven track record of minimized equipment down time Proven track record of increasing OEE (Overall Equipment Effectiveness) Proven track record of taking organization from preventive maintenance to predictive maintenance Proficient in Microsoft Office Suite including Word, Excel, and PowerPoint Succeeds in a fast-paced work environment Strong project and time management skills Experience with PLCs and automation is highly desirable Highly skilled in problem-solving and team-building

AWS/CES is looking for a Maintenance Technician- Greenwood, IN We are seeking an experienced Maintenance Technician for our logistics client in Greenwood, IN This is a great chance to join a growing company with long-term potential. Location: Greenwood, IN 1st shift (6a-4:30p/6p) Mon - Sat 2nd shift (6p-4:30a/6a) Sun - Fri Direct Hire Salary: $61,000-$62,500 What You'll Do: Perform preventive and corrective maintenance on equipment, tooling, and facility systems. Troubleshoot and repair machinery to achieve less than 30 minutes mean time to repair. Support production in reducing scrap and downtime using analytical and problem-solving methods. Fabricate and implement maintenance projects as needed. Maintain a safe work environment by adhering to MSDS, company, and federal safety standards. Accurately document all maintenance activities and follow company emergency procedures. Requirements: High school diploma or equivalent required. Minimum 2 years of industrial maintenance experience, with at least 1 year in a manufacturing environment. Strong technical and analytical skills with hands-on experience troubleshooting mechanical and electrical systems. A team-oriented professional with a focus on safety, quality, and continuous improvement. Send your resume to **********************************

Job Title: Maintenance Technician - Plastic Extrusion & Recycling Systems Department: Operations Reports to: General Manager At Supersede, we're crafting waves of change with sustainable building materials. As a fast-paced startup focused on innovation and environmental stewardship, we're looking for a dedicated Maintenance Technician to join our team and help us advance our manufacturing capabilities. Position Overview The Maintenance Technician plays a critical role in ensuring the reliability, performance, and continuous improvement of Supersede's production systems. This individual will be responsible for developing, documenting, training, and executing all maintenance activities-both preventative and reactive-across extrusion, pelletizing, grinding, sawing, and CNC routing equipment. In addition, this role will support the specification, procurement, installation, and startup of new manufacturing equipment as the company expands operations. The Maintenance Technician will begin training in Phoenix, Arizona and will support equipment startup and ongoing operations at Elkhart, Indiana. Occasional travel (up to 25%) between sites is required. Key Responsibilities Develop, document, and implement preventative maintenance (PM) programs for all manufacturing equipment and facility systems. Perform reactive maintenance and troubleshooting on extrusion, pelletizing, grinding, sawing, and CNC routing systems to minimize downtime. Diagnose and repair electrical, hydraulic, pneumatic, and mechanical systems. Safely work with and troubleshoot high-voltage electrical systems, electric motors, control panels, and PLC-based equipment. Support equipment specification, RFQ creation, vendor selection, procurement, installation, and commissioning of new machinery. Utilize CAD software to review and update mechanical and electrical drawings as part of maintenance and modification projects. Collaborate with engineering and production teams to improve machine reliability, process performance, and operator safety. Train operators and team members on proper equipment operation and maintenance practices. Maintain accurate records of maintenance activities, spare parts, and equipment documentation. Oversee facility maintenance, including compressed air, HVAC, hydraulic power units, and general utilities. Participate in continuous improvement and lean manufacturing initiatives aimed at reducing downtime, increasing productivity, and enhancing sustainability. Qualifications Minimum 5 years of hands-on experience maintaining industrial equipment in a plastic extrusion, recycling, or related manufacturing environment. Strong understanding of electrical, hydraulic, pneumatic, and mechanical systems. Proven ability to troubleshoot and repair high-voltage systems, motors, sensors, and PLC-controlled equipment. Working knowledge of Allen-Bradley or Siemens PLCs and experience with electrical schematics and control logic. Proficiency in CAD software (AutoCAD, SolidWorks, or equivalent) for mechanical and electrical layouts. Experience with equipment installation, alignment, and startup, including project management and vendor coordination. Familiarity with preventative maintenance systems, reliability engineering concepts, and spare parts management. Strong communication skills with the ability to train and collaborate effectively across departments. Ability to work independently, prioritize multiple tasks, and adapt to changing startup priorities. Willingness to travel up to 25% to support equipment installations and new site startups. Commitment to safety, quality, and environmental responsibility. Why Join Our Team At Supersede, we value innovation, teamwork, and a commitment to sustainability. You'll have the opportunity to work in a dynamic startup environment where your contributions directly shape our products and processes. We offer competitive compensation and the chance to grow with our company as we redefine building materials.

The Maintenance Technician will oversee maintenance and repairs of electrical, plumbing, heating, ventilation, and air conditioning (HVAC), carpentry, painting, and other building systems. Duties/ Responsibilities: Evaluates systems or facilities to determine maintenance or repairs that need to be performed. Assesses building systems to plan work assignments and project schedules, such as Installation of Extrusion & Thermoforming Equipment Ensures maintenance and repair work is completed correctly and in a timely manner. Daily and weekly Preventive Maintenance (PM) Performs other related duties as assigned. GMPs and SQF compliance are required. Required Skills/Abilities: Knowledge of building systems such as plumbing, electrical, and HVAC. Excellent analytical and problem-solving skills, electrical, mechanical and PLC troubleshooting skills Ability to read electrical schematics and print drawings Electrical wiring experience Ability to identify issues and determine repairs that are needed. Ability to plan maintenance schedules for building systems. Proficient with Microsoft Office Suite or similar software. Ability to operate a forklift Effective communication skills Attention to detail; able to recognize, troubleshoot and repair equipment. Bilingual a plus (Spanish) Education and Experience: High school diploma or equivalent required. Maintenance experience required. Physical Requirements: Must be able to traverse property and facility to diagnose building issues and plan repairs or maintenance. Must be physically able to perform repairs when needed. Must be able to lift 75-100 pounds at a time.

About the Role The Maintenance Manager is a hands-on player-coach responsible for the reliability, uptime, and safety of plant equipment and facilities while building the foundation for a two-site maintenance organization (MPL & IMI). The role combines electrical and mechanical troubleshooting expertise with leadership and systems-building: implementing preventive maintenance (initially grassroots, maturing into software/CMMS), optimizing contractor vs. in-house work, and partnering with Operations to prioritize throughput, cost, and safety. This is a rare opportunity to step into a critical leadership role with clear career growth, including building your own team and shaping a two-facility maintenance strategy. You will have the chance to leave your mark by creating the first standardized PM program, capture immediate cost savings by reducing contractor reliance, and position yourself for future advancement as MPL and IMI expand operations. For candidates who thrive on challenge, impact, and visibility, this role offers the chance to become a trusted technical leader and business partner in a close‑knit, fast‑moving environment. Responsibilities Reliability & Uptime: Own equipment availability, mean time to repair (MTTR), and mean time between failures (MTBF); lead structured RCA and corrective actions. Rapid-response troubleshooting for air compressors, resin pumps, spray systems (high complexity), conveyors, and material transfer systems; competent and safe work in electrical panels. Preventive/Predictive Maintenance: Build and execute a resource-light PM program (routes, checklists, criticality ranking) that matures into a CMMS with basic analytics and compliance tracking. Create quick-recovery contingencies (e.g., temporary compressor hookups) to minimize line downtime. Leadership & Team Build: Act as a player-coach; plan to hire, train, and develop one Maintenance Technician at each site (MPL and IMI) to standardize best practices across plants. Instill a culture of safety, accountability, and continuous improvement. Budget, CapEx & Contractors: Own the maintenance operating budget (labor, parts, services); optimize contracted services (~$40k+/yr baseline) vs. insourcing to capture savings. Build CapEx proposals with clear ROI, total cost of ownership, and payback; manage vendor selection and project execution. Safety & Compliance: Ensure compliance with OSHA/EHS requirements, LOTO, machine guarding, and environmental standards; drive near-miss capture and corrective actions. Cross-Functional Partnership: Collaborate daily with Production, Quality, and EHS; align maintenance priorities with schedule, changeovers, and improvement projects. Qualifications Education: AS/BS preferred in Electro-Mechanical, Electrical, Mechanical, Mechatronics, Industrial Maintenance, or related; equivalent experience considered. Experience: 5+ years as an Electro-Mechanical engineering/maintenance leader in a manufacturing plant, including hands-on troubleshooting and people leadership (player-coach). Technical Depth: Strong electrical and mechanical diagnostics (VFDs/drives, sensors, relays, pneumatics, hydraulics, pumps, compressors, conveyors, spray systems). Safe, competent work inside electrical panels; reads schematics, uses meters safely, applies LOTO rigor. PM design and execution with limited resources; CMMS exposure and the capability to mature into a software-driven approach. Leadership & Business Acumen: Builds small, high-performing teams; coaches technicians; standardizes best practices across sites. Owns budgets, parts inventory, and contractor management; constructs ROI-positive CapEx cases. Industry Fit: Comfortable in a heavy industrial environment. Required Skills Exceptional Executor: Bias for action with disciplined follow-through; converts diagnoses into sustained fixes. Resourcefulness: Designs practical solutions with tight resources; prioritizes what matters. Agility: Adapts as volumes and schedules shift; maintains service to operations under pressure. Player-Coach: Sets standards, models the work, and develops others. Professional Challenger: Engages leaders (incl. VP Ops) with respectful, data-driven pushback when it improves outcomes. Safety First Mindset: Proactively identifies risk and enforces safe work practices. Working Conditions and Physical Requirements Plant-based role; frequent presence on the floor with exposure to noise, dust, chemicals/resins, and moving equipment (PPE required). Regular standing, walking, climbing, reaching; ability to lift up to 50 lbs occasionally. After-hours/on-call support as needed to restore production or perform scheduled downtime work. About the Company MPL is an industry leader for commercial shower and bath solutions. Diversified and long-standing experience is the cornerstone to MPL. As one of the original cultured marble companies in the US, MPL was founded in 1962 and has been a leader in industry advancements and technology ever since. We focus on variety, offering a number of patterns, colors, textures, and accessories to make commercial shower spaces as unique as the buildings they are a part of. We focus on continuous advancement, tirelessly working to find the perfect balance between style, function, durability, and ease of installation. Our mission is to be the industry leader providing solutions, innovation, and superior products for showers and baths in the hospitality and commercial markets. We will offer superior customer experiences and high-quality product that is delivered on time at a competitive price. MPL is a proud member of its parent company, the American Bath Group. The American Bath Group is a manufacturing, e-commerce, assembly, and distribution business specializing in bathing products. With seventeen divisions spread across 37 facilities in our North American footprint, our international organization is home to well-known companies in the bathing industry such as Bootz, Vintage and Mr. Steam. Our 5000-employee workforce consists of a diverse range of backgrounds and skills working hard every day to build long-lasting reliable products that make a positive impact on people's lives. From improving the quality of life for senior citizens, enhancing North America's health and wellness, to giving back to our communities, the American Bath Group makes a true difference in the everyday lives of North Americans. American Bath Group provides a comprehensive offering of bathware products, including showers, tub showers, bathtubs, shower bases, shower doors, bath and shower wall panels, jetted whirlpools and spas, vanities, steam units, kitchen and utility sinks through a broad portfolio of recognized brands. American Bath Group sells products through commercial, wholesale, e-commerce, and retail channels to a diverse base of builders, plumbers, general contractors, and individual end-users.

Industrial Maintenance TechnicianLocations: Indianapolis, IN Pay: $25-28Schedule: Monday-Friday, 6am-5pmEmployment Type: Temp to Hire We are Searching for an Industrial Maintenance Technician experienced with installs, troubleshooting, repairing, and maintaining production and facility equipment. In this role you will be responsible for carrying out these duties in line with the company safety standards ensuring the efficient operations of production machinery and facility systems. HOURS:Monday-Friday, 6am-5pm RESPONSIBILITIES: Perform mechanical skills: This includes mechanical, electrical, pneumatic, and hydraulic troubleshooting and repair of facility and powered equipment. You'll need to be proficient in diagnosing issues, performing repairs, and ensuring all systems are functioning correctly. Diagnose problems, replace or repair parts, test, and adjust: This involves identifying the root cause of equipment malfunctions, replacing or repairing faulty components, testing the equipment to ensure it operates correctly, and making necessary adjustments to optimize performance. Perform regular preventive maintenance on equipment and plant facilities: This includes scheduling and conducting routine inspections and maintenance tasks to prevent equipment failures and ensure the longevity and efficiency of machinery and facilities. Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties: You'll need to be skilled in using various tools and equipment, such as wrenches, screwdrivers, electric meters, and forklifts, to perform maintenance and repair tasks safely and effectively. Comply with safety regulations and maintain clean and orderly work areas: This involves adhering to all safety protocols to prevent accidents and injuries, as well as keeping the work environment clean and organized to ensure a safe and efficient workspace. REQUIREMENTS: High school diploma or equivalent. Completion of a craft apprenticeship, or equivalent education and production maintenance experience, required. 4+ years of industrial maintenance experience with working knowledge of hydraulics, pneumatics, mechanicals, frinders, conveyors, shredders, and industrial skills. Able to read blueprints and technical drawings and follow directions. Good communication skills written or oral form. If you are a motivated and detail-oriented purchasing professional looking for a great opportunity in a dynamic environment, we encourage you to apply!About Us At NCW, we do our best to provide the brightest talent to the best companies across the country. Founded in 2000 our company's purpose was to redefine the way people think about contract staffing. People come first in our business. Our services are refined with in-depth expertise in our industry verticals, construction, manufacturing, warehousing & distribution, and engineering. We care about finding solutions that benefit everyone involved: our clients, our candidates, and our workforce. NCW is an Equal Opportunity Employer. Diversity and inclusion are important components of our culture and hiring practices. NCW is an employer and business partner dedicated to elevating the quality of life of our employees, clients, and communities.#talroosru

Responsibilities: Work with little to no supervision Clean and lubricate shafts, bearing, gears, and other parts of machinery Troubleshoot/repair machinery such as slitters, collectors, high speed welders, conveyors, and palletizers Install and maintain pipe systems, hydraulic and pneumatic equipment Repair and replace gauges, valves, pressure regulators, and other related equipment Building maintenance including minor plumbing, welding, and general upkeep Repair and assess electrical issues as they arise Able to familiarize yourself with our CMMS system and log labor/parts according to established expectations Must be willing to work overtime, including weekends and off-shifts as required Must participate in on-call program and may be required to work additional hours on off shift due to on-call program Understands quality, PPE requirements, safety, and the importance of complying with safety policies and procedures. Requirements: High School Diploma or equivalent - Technical degree in maintenance-related field preferred 2 years minimum experience as a maintenance mechanic in metal manufacturing environment with the ability to troubleshoot preferred but not required Knowledge of Good Manufacturing Practice ISO9001 standards for metals manufacturing PLC experience preferred Experience with and ability to use all types of welding, cutting, machine, and hand tools preferred Experience in high-speed packaging, welding, and mechanical power transmission preferred Work Environment: While performing the duties of this job, the employee is frequently required to walk. The employee is required to stand for long periods of time, use arms and hands to feel or reach, stoop, kneel, crouch or crawl on occasion, talk and hear. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The employee is frequently exposed to moving mechanical parts. The employee may work with materials that could irritate eyes, skin and breathing. Appropriate personal protective equipment is required. The employee will be working near and/or with high-speed automated equipment. This may cause risk of injury if safety procedures are not followed. The work environment is often noisy and hearing protection is required. Do you want to work with people who are dedicated to innovation and making the world a better place? Do you want to build a career with a company that provides opportunities for growth and development? Mauser Packaging Solutions is that company. Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team. At Mauser Packaging Solutions, you can be proud to work for a company that's always striving to innovate and serve customers better-and help them be better stewards of the environment. Whether you're a seasoned professional-or just beginning your career-there's a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. Benefits: Not Applicable

A Lead Electrician supervises electrical crews and ensures projects are completed safely, on time, and within budget by interpreting blueprints, assigning tasks, managing materials, and ensuring adherence to codes and specifications. Key responsibilities include site leadership, technical coordination, safety management, and team training. Essential skills for this role are strong technical knowledge of electrical systems, effective communication, problem-solving, and project management abilities.