Maintenance electrician jobs near me

Cargill is a trusted salt supplier to a wide variety of industries; our portfolio includes food processing salts, sodium reduction solutions, salt for water softeners and swimming pools, bulk and packaged ice melters, industrial salts, and salt for animal feeding. Working at Cargill is an opportunity to thrive - a place to develop your career to the fullest while engaging in meaningful work that makes a positive impact around the globe! We depend on creative, responsible, hardworking individuals like you to operate our business successfully! Job Type: Full Time Shift(s) Available: 2nd & Weekend Shift Compensation: $34.01/hr in the first 90 days, then $37.01/hr after the 90 days Benefits Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Completing preventative, predictive, and reactive industrial electrical work throughout the facility Documenting all completed work and the conditions found, utilizing maintenance computer software as necessary Installing, maintaining, testing, evaluating, and repairing various electrical components and systems including low voltage automation systems, medium voltage motor control circuits, and high voltage ( Comprehending mechanical/electrical schematics, blueprints, and/or operation manuals Understanding and adhering to all safety policies and procedures Maintaining a safe and clean work environment Ability to repair equipment in close proximity to explosives Other duties as assigned Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Ability to understand and communicate in English (verbal/written) Basic computer skills Ability to perform physical job duties which may include bending, lifting up to 50lbs., kneeling, climbing, crawling, and twisting, with or without reasonable accommodation Ability to work in elevated areas (4 feet and above) Ability to work in varied indoor and outdoor conditions which may include heat, cold, dust, loud noise, etc., with the use of Personal Protective Equipment (PPE) Experience troubleshooting and maintaining various electrical components and systems (low, medium, or high voltage) Ability to work underground in a mining environment Current ATF certification or the ability to obtain one upon hire Ability to work overtime including weekends, holidays, or different shifts with advance notice Preferred Qualifications Experience with SAP or a Computerized Maintenance Management System (CMMS) Certified Maintenance Reliability Technician (CMRT) or willing to acquire certification Heavy equipment/industrial maintenance technical diploma from a trade school, or 3 years equivalent experience Predictive Maintenance and/or Precision Maintenance Certifications Experience with high voltage ( High school diploma/GED or two-year equivalent work experience Important note: Eligible candidates must receive a passing score on a Ramsay standarized test. Routine background check and Alcohol Tobacco and Firearm (ATF) "Explosives Possessor" background check: To ensure a safe working environment for all employees, we will conduct a criminal background check. Considered candidates will receive a phone call from a (952) area code. Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Forever On! From the start in 2008, T5 has been focused on supporting enterprise and hyperscale customers with customized data center solutions. Today, we remain dedicated to an unrivaled level of quality that extends across the lifecycle of the core data center ranging from customized turnkey development, facilities management and data center operations to customized construction needs worldwide! The worldâ€TMs biggest companies trust T5 with their data center operations. At T5, our success is fueled by our team. With over 400 engineers, technicians and professional staff, weâ€TMre proud to foster an inclusive culture of excellence and progression thatâ€TMs dedicated to serving our customers. Commitment to Diversity & Military VeteransBattle-Tested Leadership Experience100% Data Center FocusedOwner-Operator Mindset Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. The Journeyman should be a outside linemen, inside wiremen, installer technician, electrician, or Master Electrician who has been engaged at the trade for at least five (5) years. The Journeyman will be responsible for performing journey-level electrical duties in the diagnosis, maintenance and repair of electrical equipment. RESPONSIBILITIES Lighting PMsBattery PMs Rack moves, deployments, and decommissioning Security gate repair Inverter testing on battery backups for lights Team scheduling and material requisition Receptacle panel installations and retrofits MTS board validations, actuation, and installation Electrical Panel SchedulesSpill Prevention kits for Generators, Substations, etc.Heat trace annual testing and installation/retrofits Electrical project support Willpower issues (Nonscheduled, high priority work); Usually DC floor related issues related to cooling EDUCATION OR EQUIVALENT EXPERIENCE At least five (5) years of experience in the trade Unlimited Electrical or Contractor's license (required) Formal training in approved vocational schools in the fundamentals of the trade PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand, walk, sit, climb, and balance Ability to stoop, kneel, crouch and crawl using both arms and legs Ability to pick-up minimum 60 lbs.Ability to reach with both hands and arms Ability to grasp, push, and pull objects Ability to smell, talk and hear Ability to use hands and arms to reach, handle, feel, and type Ability to see at close and distance ranges and the ability to see and correctly distinguish color Ability to work inside and outside All your information will be kept confidential according to EEO guidelines. T5 Data Centers is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. xevrcyc PandoLogic. Keywords: Data Center Technician, Location: Columbus, OH - 43201

PLANT ELECTRICIAN- $2,000 sign-on bonus!!! Pay Range: $26-$35/hr We are seeking a skilled Electrician I to support electrical systems in a high-demand production environment. This role involves installation, maintenance, troubleshooting, and repair of electrical equipment vital to daily operations. The ideal candidate has hands-on experience in industrial or commercial electrical work and can adapt to a unique agricultural setting. Essential Responsibilities Install, maintain, and repair electrical control systems, wiring, and lighting. Read and interpret schematics, blueprints, and technical diagrams. Inspect and repair transformers, circuit breakers, and electrical components. Troubleshoot electrical issues with appropriate testing devices. Ensure compliance with the National Electrical Code (NEC) and OSHA standards. Perform physically demanding tasks such as climbing, crawling, and lifting. Support heating, air conditioning, and other mechanical systems. Required Skills & Qualifications 2+ years of industrial or commercial maintenance experience preferred. Strong knowledge of electrical maintenance, repair, and troubleshooting. Ability to read and interpret electrical schematics and technical documents. Experience with industrial control systems and parametric controls. High School Diploma or GED required. Ability to work weekends and holidays as needed. Benefits Medical, Dental, and Vision insurance (effective first of the month after 30 days). PTO starting Day 1 (usable after 90 days). Paid holidays (after 90 days). 401(k) with company match. Tuition reimbursement. Employee Assistance Program. Performance reviews with potential pay adjustments.

Job Title: Admin Associate Pay Rate: $24-25/hr. on w2 Duration: 12+ Months M-F 9 am -5 pm Resource's typical working day: Answering tenant calls: Serving as the first point of contact for tenant inquiries and requests. Entering work orders: Logging and tracking service requests for engineering and security teams via email and internal systems. Managing purchase orders: Utilizing the P2P (Procure-to-Pay) platform to create and process purchase orders as needed. Administrative support: Providing day-to-day assistance to the Property Manager, including scheduling, documentation, and coordination tasks. Filing and documentation: Organizing and maintaining physical and digital files to ensure easy access and compliance. Other administrative duties: Supporting general office operations and assisting with ad hoc tasks as required. Must Have Skills: Communication Skills Collaboration skills Software skills: Proficient in Excel spreadsheet, word Outlook, email management Basic computer functions Years of Experience: at least 2 years of experience Education: GED/HS Interview Process: 1 in person and/or 1 virtual

The Maintenance Technician I supports the FedEx Industrial Maintenance for material handling to complete preventative and predictive maintenance and repair of material handling systems. Will utilize prescribed processes as they relate to mechanical power transmission, electrical, PLC/controls, welding/fabrication and other industrial maintenance related systems. May troubleshoot component and systems issues. ESSENTIAL FUNCTIONS Provides basic preventative and predictive maintenance and repair of material handling systems in mainly mechanical power transmission and will work to build stronger skills in electrical and PLC/controls and welding/fabrication. Will diagnose simple mechanical power transmission issues visually or audibly apparent at the single component level Adheres to all applicable safety standards and promotes a safe work environment by attending safety meetings and required trainings and addressing all safety concerns. Will require assistance/supervision in preventative/corrective maintenance tasks May participate in smaller scope projects May be required to work a flexible schedule including all days and shifts as the business need dictates. Performs other duties as assigned. Examples of what you can expect to learn in the Maintenance Tech I level (does not include all areas/responsibilities). Mechanical Identify a failed bearing or gearbox on a single convey and successfully repair Ability to lace and track a conveyor belt Familiar with mechanical drawings and manufacturers manuals Electrical Use a digital multimeter on AC/DC voltage and continuity setting to identify a failed or stuck relay or contactor Identify and replace a failed photo eye Familiar with electrical drawings/schematics and manufacturers manuals PLC/Controls Identify PLC components Welding or Fabrication MIG or stick weld MINIMUM EDUCATION High School Diploma or GED required Certificates in Industrial Maintenance/Mechatronics, electrical or mechanical trade or related area and an associate degree in a related area preferred. MINIMUM EXPERIENCE Six (6) year's experience, four (4) of those in FedEx Industrial Maintenance or external supporting similar material handling systems by demonstrating subject matter expertise in mechanical power transmission, electrical and PLC/Controls and advanced welding/fabrication skills through job experience, related military experience and/or related education required. Multiple certificates and degrees may be assessed by manager and HR to determine relevancy to minimum qualifications and experience KNOWLEDGE, SKILLS AND ABILITIES Ability to follow detailed procedures as directed by work orders or management Ability to anticipate, identify and repair problems using sound judgement and fact-based analysis Ability to solve mechanical or electrical problems, which may include understanding of engineering formulas Subject matter expertise in electrical, mechanical and PLC/controls troubleshooting, repair and installation which may be with multiple components and systems level Ability to read, interpret and create electrical and mechanical schematics Ability to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed data Effective verbal and written communication within own department to peers, managers, and outside vendors to convey technical data and needs Need to collaborate successfully with department, operations, vendors and support teams in failures or projects when required Software skills, including Microsoft Office suite and other web-based applications Possess time management and organizational skills JOB CONDITIONS Will need to use hand tools and possibly power tools May be working in hot or cold temperatures May need to stand, walk, bend, stoop and squat Preferred Qualifications: Pay Transparency: Pay: Additional Details: Pay Transparency: The compensation listed reflects the pay range or rate of pay reasonably expected for this posted position at the posted location or locations. If this opportunity includes multiple job levels, the pay information represents the minimum and maximum range for all levels in that job family. Actual pay is determined by several job-related factors permitted by law and relevant to the position, including, but not limited to, experience relative to the job, tenure, market level, pay at the location for this job, performance, schedule, and work assignment. Federal Express Corporation is an Equal Opportunity Employer including, Vets/Disability. Reasonable accommodations are available for qualified individuals with disabilities throughout the application process. Applicants who require reasonable accommodations in the application or hiring process should contact ...@fedex.com. Applicants have rights under Federal Employment Laws: Know Your Rights Pay Transparency Family and Medical Leave Act (FMLA) Employee Polygraph Protection Act E-Verify Program Participant: Federal Express Corporation participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: E-Verify Notice (bilingual) Right to Work Notice (English) / (Spanish)

Maintenance Technician - 2nd shift Hours: 3:00 PM - 11:30 PM (Some overtime and occasional weekends; typically one weekend per month, including Saturday) Level 2: $29-$36/hour Start Date: ASAP Summary The Maintenance Technician is responsible for performing preventive and reactive maintenance to support plant manufacturing operations. Key priorities include executing PM schedules, repairing equipment to maintain maximum production rates, and managing spare parts inventory. This role requires flexibility to work 40+ hours per week, weekends as needed, and fulfill on-call duties for repairs and assistance. Day-to-Day Responsibilities Troubleshoot and repair machines and controls (extruders, corrugators, extrusion die, DC/AC motors & drives, downstream equipment, chillers, etc.). Complete PM and repair work orders in CMMS system promptly and accurately. Order replacement parts and control components as needed. Serve as first responder for machine troubleshooting; escalate to Electrical Engineering when necessary. Support daily management initiatives and continuous improvement projects to enhance efficiency and safety. Collaborate with production staff to ensure safe and reliable equipment operation. Maintain and build job skills through company training programs. Must-Haves 5-15 years of industrial maintenance experience (minimum 5 years required). Strong electrical skills and experience with industrial systems. Ability to read electrical, pneumatic, and mechanical drawings. Knowledge of NEC, UL508A, NFPA 79 codes. Proficiency in Lockout/Tagout safety procedures, Arc Flash, and PPE requirements. Skilled in troubleshooting PLC I/O, networking, AC/DC drives, and servo systems. Strong mechanical, electrical, plumbing, and pneumatic troubleshooting skills. Plusses Experience with plastics manufacturing. Knowledge of injection molding and extrusion processes. Basic PLC and drive training. Preferred Experience 2-5 years in industrial maintenance, electrical systems, and controls. Familiarity with plastic processing. Educational Requirements High School or Vocational School Diploma (required). Technician-level training in electrical, hydraulics, and pneumatics (preferred)

📍 Columbus, OH | Full-time Highlights Perform preventive & corrective maintenance on high-speed production equipment Troubleshoot, repair, and modify thermoforming & extrusion machinery Ensure workplace safety with Lockout/Tagout and PPE compliance Use fabrication skills (welding, cutting, etc.) to support operations Join a growing team committed to safety, quality, and continuous improvement About the Role Pinnpack Columbus is looking for a skilled Maintenance Mechanic to join our team. In this role, you'll perform maintenance and repair activities to keep our production equipment running safely and efficiently. You'll be a key partner in ensuring product safety, equipment reliability, and smooth operations in our thermoforming and extrusion departments. What You'll Do Perform preventive and corrective maintenance on production equipment. Inspect, clean, and lubricate machinery and mechanical systems. Follow all safety procedures, including Lockout/Tagout, to maintain a safe workplace. Troubleshoot mechanical issues and make repairs with minimal supervision. Assist with modifications, repairs, and installations of production equipment. Collaborate with team members to meet safety, quality, and production goals. Maintain a clean and organized maintenance work area. Support cross-functional teams when equipment or process support is needed. What We're Looking For Previous experience as a Maintenance Mechanic, Technician, or similar role in manufacturing. Strong mechanical skills with knowledge of preventive maintenance practices. Ability to read and follow diagrams, prints, and written instructions. Basic fabrication and repair skills (welding, cutting, etc.). Forklift certification (or ability to obtain). Understanding of machine shop safety procedures. Ability to work safely in environments with high-speed equipment, ladders, flammables, and compressed gases. Physical & Work Requirements Ability to lift up to 40 lbs occasionally. Comfortable with standing, climbing, bending, and working in fast-paced production areas. Use of PPE (hard hat, hearing protection, safety glasses, safety shoes, etc.) is required. Why Join Us? At Pinnpack Columbus, we are committed to producing safe, high-quality food contact packaging while fostering a culture of safety, teamwork, and continuous improvement. You'll have the opportunity to work with dedicated teams in a supportive environment where your skills make a direct impact. 👉 Ready to apply? Click Apply Now to join a team that values safety, quality, and professional growth.

As a Maintenance Technician III, you will perform advanced troubleshooting, repair, and preventive maintenance on automated conveyor and sortation systems and supporting equipment at a high-volume grocery fulfillment and distribution center. In this role, you will directly drive equipment reliability through executing preventive maintenance tasks, respond to and resolve equipment failures in a timely manner to minimize operational impact, and support continuous improvement initiatives to increase equipment uptime and support client operations teams. You will also support the team with maintaining and repairing base building systems within the facility. As a Maintenance Technician III, you will serve as a key technical contributor within the maintenance team, bringing advanced troubleshooting skills, a commitment to safety, and a focus on equipment performance. Your expertise will directly support operational success, team development, and the continuous improvement culture established by C&W Services and our client. Our Purpose: At C&W Services, we live by the belief that Better Never Settles. We're dedicated to creating a positive impact globally, and we're looking for talented individuals to join our team. C&W Services provides compelling benefits, including: Weekly Pay Comprehensive Benefits that start on your first day Training, Development, and Advancement Opportunities A Clean and Cutting-Edge Facility A Safety-First Culture Pay/Work Hours/Location: Up to $33.37 per hour 3:30 p.m. - 12:00 a.m. (2nd shift) OH - Lockbourne - 2155 Rohr Rd Key Responsibilities: Safety: Promote a safe working environment by following all safety procedures. Maintenance: Maintain and troubleshoot all conveyor systems in the building. Install, maintain, and troubleshoot relay logic, ladder diagrams, control components, photo-eyes, motor starters, limit switches, proximity sensors, solenoids, etc. Monitoring: Create, assign, and close out work orders with data including labor hours, equipment maintenance and parts used. Support: Lead and audit preventative maintenance procedures. Mentor junior technicians to grow in their roles. Communication: Maintain a positive working relationship across all of the Operations facility. Basic Qualifications: High school diploma or equivalent. 4+ years of experience working with material handling equipment (MHE) such as automated conveyors and controls. 4+ years of experience conducting preventative maintenance. 4 + years of experience reading blueprints and schematics. 3+ years of experience with a Computerized Maintenance Management System (CMMS). 2 + years of experience with Programmable Logic Controls (PLC) programs. Experience acting in a team lead capacity that supports, trains, and mentors less experienced technicians. Previous vendor management experience. Proficiency in Microsoft Word, Excel, PowerPoint, and Project, with the ability to create and manage documents effectively. Ability to work flexible schedules/shifts. Preferred Qualifications: Associates or higher degree from a vocational school or college with a focus in the Mechanical or Electrical field Experience with robotic operation and maintenance. Physical Demands: Must have ability to reach overhead, kneel, squat, climb steps/ladders, use an aerial lift, and frequently lift a maximum of 50 lbs. of equipment. Ability to perform tasks wearing appropriate or required Personal Protective Equipment (PPE), which may include but is not limited to hard hat, face mask, face shield, and composite toe shoes. Regularly required to crouch or bend and reach to install/move equipment. Involves movement between departments, floors, and properties to facilitate work, averaging 6 to 12 miles per day. Work in a warehouse environment with fluctuating temperatures. Regularly required to type on a computer for 1-2 hours per day. Why C&W Services? We're a global company with over 400 offices in 60 countries. We're proud of our diverse family of employees and are committed to creating an inclusive workplace. We're recognized by the Human Rights Foundation as a Best Place to Work for LGBTQI+ individuals and are dedicated to continuing to build a culture of inclusion and respect. What's Next? Ready to take the next steps in your career? Apply today and be part of a team that is making a difference!

3:00pm-11:15pm/Monday-Thursday; 2:00pm-10:15pm/Friday Staples is business to business. You're what binds us together. Our supply chain team is dedicated to meeting our customers' needs both now and in the future. By pairing innovative technology with dynamic employees, we create smarter, more efficient ways to meet our customers' needs faster. Our network of distribution, fulfillment, fleet, furniture installation and professional teams work together in fun and safe environments to deliver state-of-the-art products, services, and expertise to our customers. What you'll be doing: As a Maintenance Technician 2 you will perform preventative and spontaneous maintenance on conveyors, electrical motors, material handling equipment, skill saws, propane torch, man-lift, hand tools, power tools, welding equipment, grinders, electrical test equipment and ladders as well as lift equipment jacks, chargers, and batteries. In your role, you will perform general building maintenance including overhead doors, construction repair, roll carts, floor repair and second level gates, doors, etc... You will perform light plumbing maintenance and perform carpentry assignments as needed. Safety is our utmost priority so, in this role, we will look to you to ensure safe work practices and embrace our safety culture. In this role you will be essential to the success of Staples Supply Chain as we deliver to our customers. What you bring to the table: A mechanical aptitude, knowledge of hydraulics, electrical, pneumatics, and ability to learn to read blueprints/schematics including electrical schematics Ability to use vendor manuals and procedures to perform preventative maintenance and troubleshooting tasks Ability to be trained and MHE certified to operate power material handling equipment, i.e. Forklift, Electric Pallet Jack, etc. An inclusive approach with your colleagues and customers to forge strong relationships and foster collaboration to resolve issues Ability to demonstrate analytical thinking and problem-solving Ability to adopt our safety procedures quickly and ensure safe work practices Ability to be comfortable working in a warehouse environment with seasonal temperature variations Basic English language skills (both verbal and written) Qualifications: What's needed- Basic Qualifications: A high school diploma or general education degree (GED) 1+ year of related experience Ability to pass a drug screen to the extent legally permissible As a Full-Time associate, you must have the ability to work additional hours beyond scheduled shift; additional overtime hours will be required based on business need Ability to work at heights up to 60 feet or more as needed An ability to lift, push or pull boxes/merchandise weighing between 70 pounds and 100 pounds by hand Must be at least 18 years of age What's needed- Preferred Qualifications: Trade school background We Offer: Competitive Salary with Shift Differential Inclusive culture with associate-led Business Resource Groups Flexible PTO (22 days) and Holiday Schedule (7 observed paid holidays) Online and Retail Discounts, Company Match 401(k), Physical and Mental Health Wellness programs, and more perks and benefits The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. At Staples, “inclusion” is an action word. It represents what we do to ensure that all employees feel valued and supported to contribute to their fullest potential. When we operate inclusively, diversity naturally follows. This is why we work hard to foster an inclusive culture, as we seek employees with unique and varied perspectives and areas of expertise. The result is a better workplace and innovative thinking that helps us exceed our customers' expectations - through the power of the people behind our iconic brand. Staples is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or any other basis protected by federal, state, or local law.

Join Our Team as an Electrician at the Columbus Zoo and Aquarium! Are you a skilled electrician looking for an exciting opportunity to work in a dynamic and unique environment? The Columbus Zoo and Aquarium is seeking a dedicated professional to perform routine building and grounds electrical work. If you have a passion for electrical systems and enjoy a variety of tasks throughout the day, from maintenance to special event support, we want to hear from you! Responsibilities Performs routine building and grounds electrical work. Electrical Maintenance and Repairs Installs and makes repairs and adjustments to such things as electrical controls, wiring, switches, simple appliances, and wall outlets. Makes minor repairs and adjustments to such things as electric motors, generators and similar equipment. Performs preventative maintenance tasks such as cleans, oils and maintains motors, brushes, bearings and switches. Installs and makes minor repairs to equipment such as air conditioners, motors, appliances, heating equipment and transformers. Safety and Compliance Assumes responsibility for all secondary voltage on Zoo, Zoombezi Bay and Safari Golf Club grounds within and outside structures. Assures safety of self, staff, animals and guests through regular participation in safety training and activities; compliance with standard operating procedures; and proper operation and maintenance of equipment. Assures safety of visitors by blocking off hazardous areas. Interprets National Electric Code. Operational Support Prepares job estimates for supervisor as requested. Provides support and assistance to any and all activities related to special events such as Wildlights and Zoofari. Assists other facilities staff when required. Participates in cross-training activities as directed. Mission and Sustainability Constantly strives to further the mission of the organization and avidly supports the Columbus Zoo and Aquarium, Zoombezi Bay, Safari Golf Club and The Wilds. Implements sustainable practices in daily tasks whenever possible. If applicable, monitors and distributes chemical supply products and follows standardized usage guidelines and safety information as set by the Material Data Sheets to Facilities. Qualifications Education and Training High school diploma or equivalent required. Technical School (2-year degree) preferred. Completion of a 4-year training course as an apprentice electrician or Certificate of apprenticeship preferred. Experience and Knowledge 5 years of electrical experience preferred. Minimum two years of journeyman experience as a building electrician preferred. Considerable knowledge of the standard practices, methods, tools and materials hazards, and safety precautions of the electrical trade, including knowledge of the National Electrical Codes preferred. Skills and Abilities Skills in the use of the tools, materials, and equipment used in the electrical trade required. Skills in locating and adjusting defects in electrical systems and equipment required. Ability to make estimates of time and material. Ability to work from drawings and specification and to effectively carry out oral and written instructions. Ability to maintain simple records. Ability to communicate well both verbally and in writing required. Ability to work a flexible schedule including evenings, weekends and holidays required, and being on-call on an emergency basis. Ability to plan and organize work in an efficient and cost-effective manner and without direct supervision required. Ability to provide excellent guest service by positively interacting with guests and upholding the guest service standards. Ability to develop and maintain cooperative working relationships with all Zoo team members and contacts regarding company business required. Ability to adhere to standard operating procedures including but not limited to safety protocols required. Additional Requirements Proof of negative TB screening prior to placement and annually thereafter required. Possession of a valid state issued motor vehicle operator's license and a good driving record required. Ability to adhere to the Columbus Zoo Family of Parks drug-free workplace policy including but not limited to pre-employment, random, post-accident, reasonable suspicion and follow-up treatment required. Ability to successfully complete a criminal history background check annually required.

The Generator Service Technician is responsible for accurately troubleshooting, repairing, and diagnosing both routine maintenance and emergency services while making repair recommendations to customers. This position will work with other generator service technicians to ensure all work scheduled is performed safely and to the customer's satisfaction. The salary range is determined by experience and skills. Job Duties: Service, repair, modify, diagnose, and rebuild standby power generators and fire pump drivers. Perform failure analysis, emergency field service, and/or repairs for customers. Service a variety of other brands of power generation equipment. Operate, drive, and maintain company service trucks and parts inventory on truck. Check/ repair all supporting systems such as fuel, cooling, and electrical systems. Operation of load banks and recording of instrumentation. Keep current on product changes, specifications, and updates. Work Experience & Qualifications: 3+ Years' experience servicing 8.5kw - 3500kw generators EGSA Certification (Preferred) Strong working knowledge of electrical systems, circuitry, and diesel engines Computer and software skills including Microsoft Office Suite. Employee Rewards & Benefits: 8 Paid Holidays & 1 Paid Wellness Day Paid Time Off Employee Referral Bonus Program Medical, Dental, and Vision Insurance 401k with a Company Match Company Paid Training Growth & Leadership Opportunities About the Company: W.W. Williams was founded in Columbus, Ohio, in 1912. Today The W.W. Williams Companies has a broad portfolio of businesses throughout the U.S. and Mexico. Under the long-standing brand, W.W. Williams Companies comprise one of the nation's largest sales and service providers of industrial power products with an extensive network of 44 facilities employing more than 515 service technicians. It offers service and repair, OEM product sales, and supply chain management solutions. Its products and service offerings include diesel engines, transmissions, bumper-to-bumper truck repair, transport refrigeration, power generation systems, and supply chain logistics services. When you join the W.W. Williams team, you become part of a company that impacts millions of Americans daily. As a leader in the transportation service, repair, and parts industry, W.W. Williams offers flexibility and tailored solutions for your transportation repair needs. Our mission is to be the trusted provider of innovative, timely solutions that surpass your expectations. Join us for a career where you'll grow personally and professionally in a welcoming, diverse, and inclusive environment. Competitive wages and benefits. EOE/AAP/M/F/Vets/Disabled, DFWP.

F5 Facility Services is seeking a highly skilled and self-motivated Remote Commercial Service Electrician to join our growing team. This is a remote position requiring exceptional independence and the ability to work with limited management interaction. The ideal candidate will be responsible for providing expert electrical troubleshooting, maintenance, and repair services to our diverse commercial clients. This role demands a strong understanding of commercial electrical systems, superior problem-solving skills, a commitment to delivering high-quality workmanship, exceptional customer service, the ability to accurately quote jobs, proficiency in utilizing company-provided mobile applications for communication and reporting, and the ability to utilize customer-specific software for time tracking and job management. Responsibilities: Perform electrical troubleshooting, diagnostics, and repairs on commercial electrical systems, including lighting, power distribution, control systems, and emergency systems. Install, maintain, and repair electrical wiring, fixtures, and equipment in accordance with local and national electrical codes. Respond to service calls promptly and efficiently, providing accurate diagnoses and effective solutions, requiring minimal direct supervision. Perform preventative maintenance on commercial electrical systems to ensure optimal performance and safety. Read and interpret blueprints, schematics, and technical drawings. Communicate effectively with clients, providing clear explanations of electrical issues and repair options, proactively managing client relationships. Maintain accurate records of work performed, materials used, and time spent on each job, ensuring meticulous documentation. Adhere to all safety protocols and regulations, ensuring a safe work environment for yourself and others. Prepare accurate and detailed quotes for repair, maintenance, and installation projects. Maintain and manage company-provided service vehicle and equipment. Work collaboratively with other team members remotely, ensuring efficient and effective service delivery. Be available for on-call and after-hours work, as needed. Utilize company-provided mobile applications to document job details, submit reports, relay information to management, track inventory, and manage work orders, demonstrating strong self-management. Utilize customer-specific software for accurate time tracking, job progress updates, and reporting. Qualifications: Minimum of 3-5 years of experience as a Commercial Service Electrician. Proven ability to work independently and manage time effectively. Strong knowledge of commercial electrical systems and NEC codes. Proven ability to troubleshoot and repair complex electrical problems. Excellent communication and customer service skills. Ability to read and interpret blueprints and schematics. Proficient in the use of electrical testing equipment. Valid driver's license and clean driving record. Strong work ethic and attention to detail. Ability to lift and carry heavy objects, and work in various environments. Ability to pass a background check and drug screening. Ability to accurately estimate material and labor costs for electrical projects. Proficiency with mobile technology and the ability to learn and utilize company-specific applications. Ability to quickly learn and adapt to customer-specific software programs. Preferred Qualifications: Valid Electrician License Experience with building automation systems. Certifications in specific electrical systems or technologies. Experience in a service-oriented business. Benefits: Competitive salary. Comprehensive benefits package (health, dental, vision, 401(k), etc.). Company vehicle and phone. Paid time off and holidays. Opportunities for professional development and advancement.

Company Vehicle and Monthly Bonus Opportunities for qualified applicants. R & T Yoder Electric, Inc in Columbus, OH is looking to hire a full-time experienced Residential Service Electrician to work in our Service call and troubleshooting division. Are you a skilled Residential Service Electrician who is looking for an established and respected company to grow your career with? Are you looking for a company that appreciates your hard work and dedication? If so, keep reading! As a Residential Service Electrician, you will earn a competitive wage of up to $40/hour, depending on experience. Plus, we offer a $300 sign-on bonus! You will also be eligible for generous benefits including health, vision, dental, life insurance, a 401(k), 2 weeks of paid time off (PTO) that increases based on time of service, 2 paid sick days, paid holidays, monthly bonus opportunities, and a company vehicle and uniforms. If this sounds like the opportunity that you've been looking for, please fill out our initial 3-minute, mobile-friendly application! ABOUT R & T YODER ELECTRIC, INC We are a family-owned and operated business with over 17 years of experience in the Central Ohio region. We pride ourselves on our company culture here at R & T Yoder where we offer great company events for each season! Our team enjoys a spring in-service training with catered lunch and games, a summer family picnic, a fall bonfire/hayride, and a winter Christmas party! In addition to our fantastic company culture, we offer competitive compensation and benefits. QUALIFICATIONS 4+ years of field experience Knowledge of residential electrical systems, NEC, and local codes A plus to have knowledge of industrial, medical or agriculture electrical systems Valid driver's license and a good driving record Are you a problem solver who enjoys troubleshooting? Are you self-motivated? Do you have excellent communication skills including the ability to explain technical information clearly and in layman's terms? Are you service-oriented? Do you find it easy to establish a good rapport with people? Are you respectful of others and their personal property? Are you punctual and reliable? Do you take pride in your work? If so, please apply today!

Are you looking for an opportunity in the lighting and construction industry?! Are you ready to continue to learn, but also ready to showcase your current skills & abilities with a growing company?! Evolved Lighting & Energy is seeking a Service Electrician to join our growing company!!! Apply today to be considered! Evolved Lighting & Energy is a growing lighting design and installation company based out of Columbus, Ohio. We currently have an opening for hard-working and reliable Electrician within our company. We service Commercial, Industrial, and Municipal Customers throughout the state of Ohio and Midwest! Job Description: The primary responsibility is to ensure safe and reliable installation of electrical systems and devices. Typical projects will be related to lighting retrofit and lighting control projects. We are looking for a motivated and dependable Electrician to join our team. Our ideal candidate has a strong interest in pursuing this trade as a career and is excited to learn skills and gain experience under a journeyman electrician. Job Duties: Troubleshoots electrical issues for any projects needed. Diagnose electrical issues (loose neutrals, tracing circuits, switching controls, etc.) Reviews and looks over electrical plans/drawings Ensures install crew is installing equipment correctly and up to electrical code standards Determines if product is suitable for intended applications Completes service calls and rotates for emergency work Program control systems Follow blueprints or electrical schematics to help install and repaid electrical wiring Performs EV charging installs Familiar with hand and power tools Follow directions and climb heights Assist with any aspect of an electrical project and daily responsibilities Additional duties as needed Required Skills and Abilities: Excellent organizational skills and attention to detail Ability to communicate through multiple mediums (text, email, phone) General knowledge of commercial construction material Ability to use common hand and power tools Physically able to maneuver ladders, fixtures, equipment, and tools daily Must be able to travel throughout week (Home most weekends) Must be able to work flexible schedule and be on call if needed Must have a valid State Issued Driver's License Experience operating lifts: exp: Scissor Lift or Boom Lift Benefits: Shift & Travel Pay Differential, Paid Travel, Lodging, Mileage and Per Diem when traveling Tuition Sponsorship and Reimbursement Options Available Health, Dental, Vision, Company Paid and Voluntary Life and AD&D, Simple IRA, Short- and Long-Term Disability Holiday and paid off time available according to company policies

Large commercial heat treat requires experienced maintenance manager. MUST HAVE experience with preventative maintenance, inventory, controls and heavy industrial equipment. Educational/Technical Requirements: The ideal candidate will have a High School Diploma or GED Ability to operate fork truck and aerial man lifts Knowledge of standard tools and their proper use. Must have own tools to complete repairs Heat Treat, automotive, or aerospace experience is preferred but not required. You must have U.S. citizenship or residency. Job Duties: The Industrial Maintenance Mechanic Apprentice is responsible to assist in the repair and maintenance of the equipment and plant buildings. This includes all mechanical, electrical, welding/fabricating, and hydraulics/pneumatics equipment. They will learn the operation of the equipment to maintain and increase the efficiency of the equipment. Continual training in different areas of trade skills and the equipment sequences will allow the Industrial Maintenance Mechanic Apprentice to perform their duties successfully. Learning to problem solve, pay attention to detail and time management is critical for finding the best repair solution. Verbal or written communication skills and teamwork are necessary when interacting with all other company personnel. Safety is for life and technicians will perform all safety procedures and attend training to further their knowledge. Train in the following trade skills: Mechanical Electrical Welding and Fabrication Hydraulic, pneumatic systems * Work with others to repairing breakdowns as required with proper documentation. Perform preventive maintenance on all machinery per work order instructions. Complete Problem log sheets, Maintenance repair tags, and other required maintenance records. Receive and pass on information to previous and post shift personnel verbally and using information white boards. Get assignment from Lead Industrial Maintenance Mechanic. * If assigned complete daily “EQUIPMENT INSPECTION” to look for signs of possible failure, safety violations, or areas to be cleaned. Preform locks out/tag out, confined space, and hot work permits as required.

Pillen Family Farms is a family owned business located in Nebraska. We market approximately 2 million pigs annually. As a family-owned and family-focused farming operation, great care goes into everything we do. From family members to team members, to even our pigs we believe in treating others with respect and as part of our family. Job Description: * This is an electrical position that is highly involved in the controls that keep our farms safe. * Responsible for working with our key software that allows individuals to know that the health of our pigs and their environment are in good working order. * Specific responsibilities include but are not limited to * Installing, trouble shooting and repairing of controls system (Dicam, Airstream, ChoreTime) and other electrical components. * Install, troubleshoot and repair Hawk alarm systems * Install, troubleshoot and repair BinTrac feed inventory system * Perform electrical preventative electrical maintenance at farm sites to insure continued equipment operation without emergency breakdowns or failures * Trouble shoot and repair electrical and controls on all swine facility systems * Run conduit, pull wires and terminate circuitry for facility remodeling or addition of equipment * Repair or replace utility disconnects, transfer switches and distribution panels. * Perform troubleshooting and repairs to propane heating systems. * Perform general troubleshooting and repair to electrical generators. * Help with general electrical work and other technicians as needed. Requirements: * Basic knowledge of electrical components including breakers, relays, switches, and control devices. * Ability to safely operate power tools, including saws, drills, etc * Must have the drive and willingness to learn technical items related to the electrical field. * Efficiently be able to organize, prioritize, and complete assignments in a timely manner. * Ablility to work well in urgent situations and find solutions. * Comply with all bio-security, safety, and animal welfare policies.

The Electrical/Controls Launch Technician is a part of the project execution & launch operations reporting directly to the Electrical/Controls launch supervisor. This person will utilize their already established MHE industrial automation commissioning experience to perform various validation and inspection service tasks on all installation projects for the PELO department to fulfill the project execution teams systems integrity check hand over to the customer. This Launch Tech will also be an ongoing asset to both the S&H Installation Operations and Customer/Support Services teams as needed. Responsibilities Ensure electrical installation abides by customer, manufacture, and S&H standards troubleshooting issues with hardware and processes Responsible for conducting launch operations services on assigned projects Analyze process, design, and implementation improvements Support control systems and PLC issues raised by customers Conduct acceptance test plans on assigned projects Qualifications Minimum Requirements: Experience in electrical field and or MHE automation field Performed Quality Assurance and Quality Control functions in a field environment Experience in troubleshooting PLC codes in the field 3-5 years' experience working in the Electrical/Controls Installation Field Preferred Qualifications: Not required but is a major plus: Has a major background in MHE customer service, support services, or controls/electrical installation most preferable. Skills & Knowledge: Knowledge of electrical and control theories and principles Experience with variable frequency drives Ability to read and understand electrical drawings Solutions-oriented attitude Able to work on own initiative Experience in performing system qualification checks and submitting written reports Education: Bachelor's degree in computer engineering, electrical engineering, or background in industrial electrical services.

We are more than a health system. We are a belief system. We believe wellness and sickness are both part of a lifelong partnership, and that everyone could use an expert guide. We work hard, care deeply and reach further to help people uncover their own power to be healthy. We inspire hope. We learn, grow, and achieve more - in our careers and in our communities. Summary: This position is responsible for basic maintenance and facility upkeep. Responsibilities include general maintenance, preventative maintenance, grounds keeping, and painting. This position also supports other facilities associates, projects, and activities based on organizational needs. The duties of this position may vary based on campus location, business needs, and/or seasonality of tasks performed. Senior Maintenance Technician at OhioHealth Dublin Methodist Hospital. This position will work mid shift. Plan is to support department and operational needs during the time period between days and nights. Expected shift will be 4 ten-hour days, Tuesday-Friday. Hours most likely to fall between 11am and 10pm according to departmental and operational needs. This position should be capable in commercial maintenance, willing to support the building with patch and paint needs, and be willing and capable of learning the techniques for hospital bed repairs. This position will be incorporated into the on-call rotation at the completion of onboarding. On-call expectations: 11:30pm Friday night until 9:00 pm Sunday night on a rotation of all team members. Expectation is on-call once every 7-9 weeks. Responsibilities And Duties: 50% Maintenance General & Preventative Performs preventative maintenance on equipment and systems to ensure effective facilities operations within a healthcare environment. Preventative maintenance includes but is not limited to: HVAC, plumbing, mechanical rooms, electrical systems, equipment, physical facility features windows, doors, elevators, etc. Responds to service calls involving OhioHealth properties, including administrative, patient care, public areas within a healthcare facility. Service examples include but are not limited to: Cleaning/adjusting/testing/repairing/replacement of HVAC equipment, plumbing, electrical systems Lighting/Switches/Outlets/Wiring, and other equipment/systems necessary to maintain the operations of a healthcare facility. Troubleshooting minor medical gas equipment and kitchen equipment. 40% Provides general corrective maintenance in Plant Operations on boilers, chillers, pumps, and heat exchangers. Completes repairs to equipment used in the delivery of patient care including but not limited to: Beds, wheelchairs, stretchers, and other moveable patient care equipment. Completes repairs to equipment used in administrative areas including but not limited to chairs, desks, and other office related equipment. Completes repairs to equipment used in public areas including but not limited to chairs, tables, and shelves. Contacts vendors for warranty compliance issues and to receive proposals pricing information for non-warranty projects. Responsible for service calls involving carpentry and painting activities in patient care, administrative, and public areas in accordance with building and life safety codes. Activities including but are not limited to repair/hang doors, replace locks, repair ceilings, wall repairs, wall protection installation, windows, floors, furniture, cabinets, glass, and equipment installation to a variety of wall surfaces. Performs minimal painting/patching responsibilities including material estimates, area preparation, application, and clean-up. 10% Equipment and Facility Inspection Responsible for coordinating/inspecting projects, physical structures, and equipment to ensure quality standards, approved time frame, and compliance with city/state codes and JCAHO. The major duties, responsibilities and listed above are not intended to be all-inclusive of the duties, responsibilities and to be performed by associates in this job. Associate is expected to perform all other duties as requested by supervisor. Minimum Qualifications: High School or GED (Required) DL - Driver's License - Department of Motor Vehicles Additional Job Description: SPECIALIZED KNOWLEDGE Working knowledge of mechanical systems and understand commercial heating and cooling. Knowledge of building safety codes, working with blueprints, drawings, manufacturer's instructions, supplemental details and wood, metals, plastics, cutting, patching, joining, sanding and layout. Knowledge of various materials, preparation methods and finishes. Knowledge of chemicals involved in trade and safe use of same. Experience in electronics, electricity, plumbing, mechanical workings, and good working knowledge of hand and power tools. Must be able to work in a team-oriented environment. 2-3 yrs. in commercial or building maintenance. Work Shift: Evening Scheduled Weekly Hours : 40 Department Plant Operations Join us! ... if your passion is to work in a caring environment ... if you believe that learning is a life-long process ... if you strive for excellence and want to be among the best in the healthcare industry Equal Employment Opportunity OhioHealth is an equal opportunity employer and fully supports and maintains compliance with all state, federal, and local regulations. OhioHealth does not discriminate against associates or applicants because of race, color, genetic information, religion, sex, sexual orientation, gender identity or expression, age, ancestry, national origin, veteran status, military status, pregnancy, disability, marital status, familial status, or other characteristics protected by law. Equal employment is extended to all person in all aspects of the associate-employer relationship including recruitment, hiring, training, promotion, transfer, compensation, discipline, reduction in staff, termination, assignment of benefits, and any other term or condition of employment

$1,000 Sign-On Bonus for Qualified Candidates Job Type: Full-time, Monday-Friday (No weekends) About Us Walsh Brothers Electric LLC is a family-owned business based in Lancaster, Ohio, serving residential, commercial, and new construction electrical needs. We take pride in delivering high quality, trustworthy service with integrity, clear communication, and professional workmanship. Position Summary We are seeking experienced Service Electricians to troubleshoot, repair, upgrade, and install residential electrical systems. A strong blend of technical skill, customer interaction, and sales aptitude is required. If you enjoy owning the job from start to finish and want your hard work rewarded, this is for you. Key Responsibilities Install residential wiring and circuitry (new work and retrofit) Interpret prints, plans, and wiring diagrams Diagnose and repair electrical issues using testing equipment Ensure compliance with NEC and local electrical codes Perform “new work” and “old work” applications (remodeling, retrofits) Safely operate lifts, ladders, and other job site equipment Work in attics, crawl spaces, ceilings, walls, etc. Coordinate with homeowners - explain work, answer questions, maintain professionalism Support sales efforts: identify upgrade opportunities, present options to homeowner Required Qualifications & Skills Minimum 5 years of electrical experience Previous sales experience (ability to present and sell solutions to homeowners) Strong working knowledge of NEC (National Electrical Code) Valid driver's license, reliable transportation Excellent customer communication and interpersonal skills Professional appearance and dependability Ability to work in tight or constrained spaces (attics, crawl spaces) Compensation & Benefits Sign-on bonus: $1,000 for qualified candidates Competitive base pay + weekly bonuses Weekly pay schedule Benefits package including: Health, Dental, Vision Life and Disability Insurance 401(k) with 3% match Paid Time Off & Paid Holidays Fuel card Company truck (that can be taken home) Paid training Company-supplied uniforms Opportunities for growth and advancement Regular social events and bonus opportunities Work Environment & Culture Growth-oriented, family business Emphasis on training, safety, respect, and teamwork Platform for long‐term career, not just a job Legal & Equal Opportunity Statement Walsh Brothers Electric LLC is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, veteran status, or any other characteristic protected by law. Employment is conditional upon background checks, verification of credentials, and eligibility to work in the U.S.