Top 50 Maintenance Electrician Skills

high Demand

• Air compressors, air dryers, various pumps and related devices, electrical controls, troubleshooting, preventive maintenance and installations.
• Manufacture a portable compressor controller to be used with all High Pressure Air Compressors aboard NIMITZ Class Carriers.
• Diagnose, repair, and maintain plant auxiliary equipment such as: air compressors, and HVAC systems.
• Performed maintenance on motors, air compressors, oil pumps, hydraulics, heaters and air lines.
• Perform preventative maintenance on four air compressors that are responsible for supplying the plant with pneumatic pressure.

• Maintain air compressors, air conditioners, lathes, mills, saws, and sand blasters.
• Maintained injection molding machines, auxiliary equipment, vacuum systems, and air compressors.
• Repaired air compressors, chillers, heating units and exhaust fans.
• Maintained process water and plant air compressors and dryers.
• Air compressors and 2 stage dryers.

• Maintained all related plant equipment, Air compressors, blowers, boilers, sump pumps and all related controls.
• Work Highlights: Maintain facility filtration systems (including chillers, air compressors, and hi-vac).
• air compressors, boiler and cooling water, as well as reverse osmosis water filtration.
• Air compressors, vaccum pumps, water pumps, chillers, hydraulics pumps.
• Worked on air compressors, chiller, dust collector, rollup doors.

• check the air compressors and fill with oil twice per shift.
• air compressors, and all utilities.
• Manage maintain and operate boilers, cooling towers,chillers, water softeners, air compressors, etc..

Show More

high Demand

• Supervised electrical department for the Intercontinental Airport Houston HVAC maintenance contract.
• Maintain facility systems, such as lighting and electrical power, HVAC, and minor plumbing work.
• Maintained the HVAC system, boilers, fire alarms, and hot water system.
• Maintain & troubleshoot HVAC, solar arrays, computer room, administrative office needs.
• Provided installation and repair of HVAC, power exhaust and infrared heating systems.

• Maintain lighting, power and HVAC equipment according to Intel schedules & specifications.
• Maintain all Power transmission, HVAC, Lighting, Telephone and Alarm systems.
• Maintained all electrical HVAC, Boilers, Motors, VAV in building.
• Maintain HVAC systems, which include but not limited to Freon handling.
• Monitor and adjust EMS system for optimum HVAC performance and efficiency.

• Scheduled Maintenance on HVAC equipment, and other production equipment.
• Perform HVAC maintenance on rooftop units to include interior units.
• Cross trained on HVAC, plumbing, and carpentry.
• Repair of HVAC equipment and Commercial Building Electrical Maintenance.
• Repaired and maintained HVAC system and racing lure/electrified rail.

• Changed filters on all HVAC equipment.
• Replace AC/exhaust fan motors and similar HVAC equipment Performed building maintenance throughout the building.
• Designed and maintaned DCS low voltage HVAC controls.
• Circuit movement and addition HVAC Maintenance and Repair Light duty Tele-Data Installation and Repair
• Worked with systems such as fire alarms, card reader, johnson controls, jail security, and HVAC systems.

Show More

high Demand

• Worked on PLC's, motor controls, VFD's, troubleshooting and all process systems from voltage 23k KVA-down.
• Installed and repaired VFD's Installed and programmed PLC's and controls which increased Trans- Oceans production.
• Performed repair and maintenance on various systems including PLC's, VFD's and motors.
• Program VFD'S 100 HP vertical pump motors for irrigation.
• Install controls and VFD for portable quench tank.

• Installed, set up and maintained VFD drives.
• Experience working on VFD, A.C. / D.C. motors, circuit breakers, MCC buckets, and lighting.
• Trouble Shot PLC's, and VFD's in a production environment.
• Trouble shooting Control Panels, AC Motors, PLC and VFD.
• Maintained equipment ranging from to 300 HP electric motor including across the line starting and reduced voltage starting with VFD controls.

• Maintain all Bottling equipment including, Fillers, Pasteurizers, Lablers and Conveyor systems all PLC and VFD controlled.
• Repair and install of new and used electrical equipment starters, VFDs, disconnects etc.
• Sustained and improved performance on VFD's, Allen Bradley SLC500 and MicroLogix PLCs.
• Work with VFD's, Install pneumatic and hydraulic rams.
• Install, terminate and program VFDs.

• Work with Allen Bradley PLC's, MCC's and switchgear and VFD's.
• Job title Maintenance Electrician Worked on PLCs, VFDS, electrical systems.
• Maintain VFD's (ABB and Smart Torque) and Coker Crane (Static Stepless)
• Replace motors from 1/2" to 100 HP, VFDs, purge systems.
• Trouble shoot electrical problems, vfd's, plc's, ect.

Show More

high Demand

• Used measuring instruments to inspect parts.

Show More

high Demand

• Repair and installation and modification of electrical and mechanical production equipment in the process, packaging and distribution of confection products.
• Enhanced plant productivity by successfully troubleshooting breakdown issues on key production equipment thought beyond our in house repair capability.
• Redesigned and rewired controls on production equipment to industry standards, resulting in dramatically improved reliability and production efficiency.
• Maintained and repaired assorted production equipment both electrically and hydraulic powered in order to keep production on time.
• Maintained and troubleshot production equipment and plant electrical systems for this plumbing and industrial copper tubing manufacturing plant.

• Set up production equipment to specification and ensure profitable operation of machinery.
• Maintain plant electrical production equipment.
• Maintained production equipment and facility.
• Employed to repair, maintain and sometimes install production equipment that made Reynolds Wrap Aluminum foil.
• Maintained pumps, compressors, gas powered equipment, diesel powered equipment and production equipment.

• Handled all preventative maintenance to include high voltage gears along with all production equipment.
• Served as shift electrician in charge of troubleshooting on all packaging and production equipment.
• Perform routine preventative maintenance on all production equipment and provide support for all production.
• Perform updates of PLC's and touch screens on production equipment.
• Repaired and maintained and maintain production equipment 09/2004 - 8/2005

• Design and build of control systems for new production equipment Electrical troubleshooting of production equipment
• Maintained the production equipment for a 24-hour steel plant including crane maintenance and repair Performed seasonal maintenance on motors and controllers.
• Developed a PM program on production equipment to reduce downtime.
• Preformed maintenance on refinery production equipment Hours Wage $17.50
• Maintained and troubleshot production equipment * Preventative maintenance * AB PLC/HMI Programming * Production Machine Upgrades

Show More

high Demand

• Performed equipment installation checks and validations on new equipment.
• Installed new equipment and associated power requirements.
• Used electrical test equipment, drawings, blueprints and schematics to install new equipment and diagnose problems with existing machinery.
• Establish working relationships with internal and external engineers for the purpose of commissioning new equipment or improving current processes.
• Submit a time (working man hours) and material estimate for repairs, upgrades, and new equipment.

• Assist and lead on installs of new equipment and improvement of older machines.
• Installed new equipment, replace, repair and installed new wiring.
• Installed new equipment and trouble shot repair existing equipment.
• Prepare reports and continuously evaluate new equipment and techniques.
• Trained employees on how to operate new equipment.

• Supported the installation of new equipment.
• Installed, and aligned new equipment.
• Install new equipment and machinery.
• Wired and installed all new Equipment
• Maintained injection molding presses and paper binding machinery Installed new equipment and designed modifications to outdated equipment.

• Performed new equipment installations and modifications, along side of electronics programming and repair.
• install new equipment and electrical devices as needed.
• assemble and install new equipment including large automated machinery, plc's and ac motor drives.
• Maintain all steel and building electrical equipment * Troubleshooting * Install all new equipment and repair as needed * Fork truck maintenance
• Install new equipments for door and window trimming and molding machineries e. g. Porter Cable.

Show More

high Demand

• Programmed, troubleshoot, and operated programmable controllers, distributive control systems and interlocking systems.
• Tested and maintained computer-related industrial electronic control systems and electrical components.
• Serviced fire and life safety control systems in: hospitals, high rises, industrial buildings, and other commercial buildings.
• Followed safety guidelines for production Frequently repaired and troubleshot AC/DC drives and three phase motor control systems.
• Perform the tasks of adjusting, modifying, correcting and documenting electrical control systems, as required.

• Performed Electrical Maintenance working on overhead cranes, punches, shears and all types of control systems.
• Constructed 6 rooms within building structure and worked with Class 10000 Clean Room Environmental Control Systems.
• Installed HVAC systems, building control systems, general office equipment and furniture.
• Installed motor control systems, lighting systems, and fire alarm systems.
• Perform all maintenance on all process control systems in silver mine.

• Installed and serviced street lights and electrical control systems.
• Installed electrical conduit, control systems or power systems.
• Maintained HVAC and building electrical control systems.
• Design and fabrication of cryogenic temperature control systems and shroud/heat exchangers.
• Designed and installed various control systems for different process applications.

• Maintain and repair large motors, equipment, and control systems in factory Assist in running facilities safely and efficiently.
• Reset and Troubleshoot ride operating control systems while following strict safety standards, including clearing guests from the area.
• Installed all new Telemotive Remote Control Systems on all Overhead Cranes in plant.
• Install plc control systems, update plant and equipment drawings.
• PLANT CLOSED) Maintain power distribution and control systems including 480v, 4,160v, 13.8kv switchgear and, motor /generator maintenance.

Show More

high Demand

• Worked to maintain with high voltages (12,500V/480V/277V/208/120V 3PH), while also ensuring safety of all visitors and staff members.
• Provided maintenance for a variety of high voltage, direct current applications including overhead cranes (45 ton).
• Experience with detecting underground cable line failures using CFL radar, high voltage cable testing, excavation and repairs.
• Install and repair high voltage wiring for motors distribution systems, furnace equipment.
• Perform High Voltage work following the procedure and all safe work practices.

• Maintain and repair all plant electrical systems low and high voltage.
• Examined and created solutions for high voltage electrical system issues.
• Install high voltage load centers, lighting panels and transformers.
• Maintain and repair machinery operated on high voltage DC.
• Pull wire terminate low voltage and high voltage motors.

• Performed Electrical Checker duties around high voltage equipment.
• Experience in low and high voltage.
• Worked on low voltage all the way to the fuses on the high voltage in the plant.
• Connected power using 110v, 220v, 240v, 277v, and high voltage 480v.
• Maintained the low(4KV) to high voltage(13.8 KV) feeders.

• Work with high and low voltage systems, including transformers, high voltage primary feed and secondary transformers.
• Worked with low and high voltage, hydraulics, pneumatics and water systems.
• Performed repairs to the [ ] transformers and associated high voltage gear.
• Handle electrical Additional Service Installation of high voltage units.
• Grounded motors, tripped starters) Energize and de-energize a variety of high voltage 4160v and 480v switch gear.

Show More

high Demand

• Designed and installed new electrical control panels, implemented energy conservation by adding KAVAR capacitors to reduce power consumption.
• Assist with construction of electrical/electronic control panels according to drawings and wiring schedule.
• Work includes running conduit, mounting and wiring control panels as well as breaker panels/ disconnects, and lighting upgrades.
• Build control Panels from scratch per schematics with instrumentation, Motor Controls Motor Starters, Relays and Timers.
• Designed and installed several motion control panels and various equipment upgrades as needed.

• Repair brakes, shafts, motors, and hoist and control panels.
• Install conduit, run wiring to control panels and timer systems.
• Designed, built and modified control panels and electrical systems.
• Integrate control panels onto equipment, cable and test functionality.
• Built/installed electrical control panels, lighting, receptacles, etc.

• Installed and hooked up air conditioning control panels.
• Design and build new control panels and machinery.
• Designed, constructed and programmed PLC control panels.
• Wire in new control panels for machines.
• Build control panels for various operations.

• Installed control and distribution apparatus, such as switches, relays, lights, power distribution panels and motor control panels.
• Controlled baking ovens, overhead conveyors, floor conveyors, boilers, substation transformers [ ] and control panels.
• Experienced with cable trays, control panels, switchgear and terminations.
• Design and build control panels, install conduit and Assisted with the evaluation/implementation of corrective terminate wiring.
• Set up and programed drive systems.Mounted and fastened control panels, sensors and video cameras.

Show More

average Demand

• Perform electrical installation, troubleshooting, repair, maintenance and other electrical services on roadway/facility lighting and electrical systems.
• Maintained and repaired complex electrical systems on a wide variety of technical equipment and machinery.
• Maintained multiple systems within the industrial manufacturing plant.
• Modified machines to meet production requirements.
• Installed all machinery into new facility.

• Checked performance of machinery and equipment.
• Use electrical, mechanical, pneumatic, and hydraulic blueprints to aid in the troubleshooting and repair of machinery.
• Performed minor HVAC duties and plumbing; drywall, painting, and carpentry according to company requests.
• Wired and installed bay doors / HVAC units / septic pumps and boilers.
• Maintain accurate inventory of electrical parts, equipment, and related manuals.

• Drafted entire facility with new wiring diagrams for NFPA 70e.
• Rewired and updated controls for outdated machines using new prints.
• Maintained, and replaced different instruments throughout the plant.
• Aided in the design and building of new machines.
• Researched, acquired, and installed components as needed.

• Repaired CNC/NC and Manual Machines Tools.
• Installed and moved heavy machinery.
• Job Duties: Managed of the Troubleshooting equipment and DC/AC Motors, repair conveyors system, motor controls.
• Performed routine maintenance on AC and DC drives and motors.
• Installed all wiring and pneumatics to machines.

Show More

average Demand

• Switch gears, component layout and mounting to frame installation, measurement, fabrication and installation of conduit and associated fittings.
• Performed repairs on 5 stage turbine compressors, at voltages up to 4160vac 3-phase, switch gear and motors and panels.
• Maintain AC drives and switch gear to 4160 volts and all associated motors and MCC for Shutdown Season.
• Performed Clean and Inspect of low and medium voltage switch gear during refueling outages.
• Participated on team that performed preventive maintenance and cleaning of switch gear system.

• Balance of electrical loads, electrical circuitry, load centers and switch gear.
• Tested, inspected, repaired 277 v/480 V Panels and Switch Gear.
• Installed high voltage switch gear, motor starters and soft starts.
• Experience in wiring panels, switch gears and control boxes.
• Check airfield generators and switch gears for malfunctions and alarms.

• Installed electrical switch gear and panel boxes.
• Installed and rebuilt automatic transfer switch gear.
• Performed work on high voltage switch gear.
• Install 15 KV switch gear, cable, cable splices, and cable connections.
• Worked on Switch Gear up to 480 Volts.

• Received several awards and accommodations for outstanding work Detailed experience with high voltage switch gear
• Repair electric motors, motor control, sub stations, switch gear, heat tracing systems, ect.
• Maintained electric motors and motor controls Maintained 2400v switch gear and substations
• Maintain steam boiler system Maintain fire alarm system and fire pumps Maintain switch gears and transformer maintenance

Show More

average Demand

• Advanced troubleshooting with various Repairs complex electrical/mechanical equipment to ensure production goals are met.
• Work in an industrial environment troubleshooting and repairing electrical and some mechanical equipment.
• Performed preventive maintenance and all mechanical equipment, rebuilt motor's
• Used preventative and standard maintenance on electrical and mechanical equipment.
• Controlled and monitored mechanical equipment using a computer.

• Maintain electrical-mechanical equipment related to the heat treating industry
• Maintain all associated Electrical and Mechanical equipment.
• Analyzed machine failures, overhaul, dismantle, adjust and make general repairs to machines and mechanical equipment.
• Performed periodic maintenance of various mechanical equipment, ice machines, fork lift's and kitchen equipment.
• Performed troubleshooting high voltage equipment, PLC controls, and mechanical equipment.

• Installed electrical and mechanical equipment in accordance with the National Electric Code.
• Maintained pneumatic, electrical, and mechanical equipment in industrial plant.
• Maintain electrical and mechanical equipment in a highly productive saw mill.
• Perform any duties to plant electrical and mechanical equipment.
• Repair and work on all mechanical equipment.

• worked on troubleshooting and repair of electrical, mechanical equipment of production lines and ancillary systems.
• Repaired electrical & mechanical equipment Ordered parts as needed, maintained inventory of consumable parts
• Maintain and trouble-shoot all electro-mechanical equipment involving the daily operation of the plant.
• Installed, repaired and maintained heavy duty electro-mechanical equipment such as generators, motors, fans and compressors
• Grade One Electrician, Mines Maintenance Department Responsibilities include: Troubleshooting Electrical/Mechanical Equipments.

Show More

average Demand

• Worked with operations to optimize tissue manufacturing machines with the use of PLC controls.
• Wired signal loop for PLC's / transfer switches / and emergency/standby equipment.
• Maintained boilers, high-pressure air systems, refrigeration systems and PLC Controls.
• Make changes to PLC programs as covered by authorized Engineering Controls.
• Worked on Allen Bradley PLC circuits installing and programming.

• Maintained automated plating line PLC's.
• Build, and wire new PLC's, and I/O panels.
• Monitor, operate, and troubleshoot electrical problems through PLC's at individual equipment or through remote locations via ethernet.
• Work with AC single and three phase) DC based systems, motor controllers and PLC based systems.
• Performed non-PLC related IT work with routers, hubs, and cabling.

• Applied knowledge of PLCs and troubleshooted automated systems.
• Installed and commissioned PLC and Scada controls.
• Learned PLC programming and Panel View programing.
• Worked with PLC's, drives, power supplies, controls, ac/dc motors, and CNC programming.
• Maintained and troubleshoot PLCs, conveyers, pumps and drives and also constructed any new insulation within the plant.

• Installed, programmed and troubleshot Modicon and Allen Bradley Plc's on client's site.
• Loop calibration 4 to 20MA * PLC, Allen Bradley and Bristol Babcock troubleshooting.
• Plant maintenance including breakdowns, PLCs, instrumentation.
• Programed PLCs and motor starers.
• maintained rubber and plastic injection presses intelled in plc,electrical control troubleshooting hydraulics

Show More

average Demand

• Used hand tools, power tools, measuring instruments, testing devices, jacks, chain falls and hoists and lifts.
• Assembled, installed, tested and maintained electrical wiring, equipment, apparatus and fixtures using hand tools and power tools.
• Constructed and installed instrument panels using hand tools, rulers, dividers, and power drills following given specifications.
• Disassembled defective electrical equipment, replaced defective or worn parts, and reassembled equipment, using hand tools.
• Used hand tools, power tools, precision measuring instruments, electrical and electronic testing devices and pullers.

• Familiarized in the use of a variety of hand tools, power tools and standard electrical measuring instruments.
• Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment.
• Measure, cut, and bend wire and conduit, using measuring instruments and hand tools.
• Repaired or replaced wiring, equipment, and fixtures, using hand tools and power tools.
• Used hand tools, power tools, and air tools for maintenance task.

• Ordered and kept list, and operate a variety of hand tools.
• Constructed different electrical equipment by using hand tools and power tools.
• Replaced damaged and broken wires and cables, using hand tools.
• Remove weeds daily by hand-pulling and using hand tools.
• Used hand tools to change worn cutting tools.

• Used hand tools to replace defective equipment parts.
• Rebuild and repair electrical hand tools.
• Plant, prune and maintain trees, shrubs and flowers using hand tools.
• Used hand tools and winches.
• Traced and diagnosed malfunctions with hand tools and test equipment such as multi-meters.

Show More

average Demand

• Repaired and installed analog circuit boards on various types of equipment including welders, machining centers, conveyor lines.
• Checked, tested and replaced faulty components, circuit modules and printed circuit boards.
• Diagnosed and repaired and replaced faulty electronic components, such as printed circuit boards.
• Trouble shooting printed circuit boards to individual circuit and component level.
• Perform board level repairs on circuit boards for multiple OEM vendors.

• Trouble shoot control panel and replaced circuit boards if needed.
• Replaced electronic circuit boards and relays.
• Repaired circuit boards to component level.
• Replaced faulty printed circuit boards.
• Replaced contactors, relays, faulty circuit boards and bad wiring when required.

• Maintained lighting equipment for production lines Preventive maintenance Printed circuit boards Pipe fitting
• Represented employers in day to day bussiness Diagnosed and repaired and replaced faulty electronic components, such as printed circuit boards.

Show More

average Demand

• Performed Electrical/Mechanical/Hydraulic maintenance on CNC machinery.
• Implemented and started the first preventative maintenance program for CNC, mills and lathes for the maintenance dept.
• Preformed monthly, semi-annual and annual PM's on a verity of CNC, mill and lathe machines.
• Repair and installs electrical power supply to 8 robotics (routers CNC) machines per schematics.
• Selected to attend a course on CNC Diagnostics and Repair in Grand Rapids, Michigan.

• Install and maintain two 5 axis CNC routers and a 1,000 ton hydraulic press.
• Maintain and trouble shoot CNC machinery, conveyor belt system, and overhead cranes.
• Employed as maintenance electrician for machine shop equipment (excluding CNC machines).
• Wired and retrofitted machines including CNC's and industrial controlling systems and processes.
• Assisted CNC machine technicians in maintenance and repair of CNC machining centers.

• Experience in CNC repair and troubleshooting as well as servo motor replacement.
• Repair of Motor Control and CNC Interfaces.
• Maintain and troubleshoot 3 CNC Tube Benders.
• Operated and familiar with CNC machinery.
• Repaired machine shop CNC's.

• Moved and installed CNC's.
• Project Highlights Personally rewired antiquated metal forming machine to CNC system.
• Service Okuma CNC lathes and mills, LNS bar feeders, Pines and Eaton Leonard tube benders.
• Install new electrical systems for CNC, Presses, and Automations equipment.
• repair of CNC lathes, mills, and other CNC machines.

Show More

average Demand

• Qualified Operator of man lifts, pickers, gantry, jib, and overhead cranes and other heavy equipment.
• Installed, repaired, and maintained multiple 110-480 vac motor control switch stations, transformers, and overhead cranes.
• Preformed regular preventive maintenance on CNC machines, welders, weld manipulators, and overhead cranes.
• Lead the day to day operation and maintenance for the overhead cranes in the Everett facility.
• Maintained the electrical parts of the overhead cranes, single and dual head.

• Install: radio control for overhead cranes and automatic welding with Gantry.
• Maintained all plant equipment including overhead cranes and over 200 welders.
• Repair of overhead cranes, lighting, receptacles, service equipment.
• Overhauled and maintained 250VDC Overhead Cranes and all related equipment.
• Have a strong background of working with 480v overhead cranes.

• Preformed preventive maintenance on CNC machines and overhead cranes.
• Corrected controls in the furnace and with overhead cranes.
• Service and maintenance of overhead cranes and controls.
• Repaired 460 VAC 3-phase overhead cranes.
• Worked on all overhead cranes.

• Installed, repaired, troubleshoot electrical systems & PLC System, DC overhead cranes, Instruments and Thermocouples on machines.
• Worked on overhead cranes ,welding machines, starters, 480v motors, lighting, and any electrical jobs assigned
• Trouble shoot electrical problems including overhead cranes and any other electrical issues that come up.
• Installed & Repaired Generators -Repaired Welding Machines, Grinders, Lights, and Overhead Cranes
• SEW VSR Drives, Toshiba Inverter Drives Inspect and Maintain Overhead Cranes

Show More

average Demand

• Trouble shooting and electrical analysis of all electrical components.
• Repair and trouble shooting of all electrical systems on overhead cranes, forklifts and inside electrical systems.
• Preform maintenance repair and trouble shooting of all makes and models of welding equipment and generators.
• Job duties included trouble shooting power loss, installing phone lines, and cable lines.
• Resolved electrical production equipment problems for the company and facilities via Trouble Shooting skills.

• Trouble shooting equipment malfunctions and making repairs and adjustments.
• Provided trouble shooting of Electrical and PLC's.
• Trouble shooting relay logic and solid-state controls.
• Trouble Shooting electrical and mechanical issues.
• Trouble shooting quickly solving problems.

• Trouble shooting and repairs of roof top blowers and many different styles and sizes of presses and part manufacturing equipment.
• Master Electrician since July 2009 - Installation of electrical systems - Trouble shooting Plc, Drives, Sensors, etc.
• Maintained and trouble shooting of failed Electrical issues on printing equipment, relay logic, DC drives, etc.
• Perform Electrical and Mechanical trouble shooting on CNC Equipment, Hobing, Grinding, Shaving, Induction Heat treating.
• trouble shooting of electrical components, work of man lifts scissor lifts, operation of fork lifts.

• Use Blueprints and schematics for electrical, pneumatics and hydraulic trouble shooting of injection molding machines.
• Trouble shooting HVAC units, welders, furnaces, chemical controls, CNC machines.
• Performed all electrical installiations, trouble shooting, repair, and maintenance procedures.
• Trouble shooting Outlet and switch installation.
• Trouble shooting, Tubing installation, * Material ordering, Job walks with contractors/ customer * Quality Assurance and Quality Control

Show More

average Demand

• Installed and repaired electrical equipment such as transformers, controllers, circuit breakers, motors, fixtures, plugs and switches.
• Connect wires to circuit breakers, transformers, or other components; Repair or replace wiring, equipment and fixtures.
• Certified General Electrician* Running conduit, wiring up various devices, transformers, machine upgrades, circuit breakers, panels.
• Aided field electricians identified troubleshooting issues with circuit breakers, transformers or component based on applied lines and blueprint diagrams
• Installed conduit to terminals such as connection boxes, circuit breakers, voltage regulators, and switch panels.

• Install, repair and maintain MCC cabinets, circuit breakers, and transformers with voltage Up too 4160V.
• Repaired, replaced, and cleaned equipment and components such as circuit breakers, brushes, and commentators.
• Install and repair switches, receptacles, wiring, lights, fans and circuit breakers.
• Connect wires to circuit breakers, transformers, power panels, lighting and other components.
• Installed, tested and modified circuit breakers, controls, fuses, lights and motors.

• Conducted periodic testing and replacement as needed of circuit breakers and switches.
• Installed switches, receptacles and circuit breakers.
• Connected wires to circuit breakers and transformers.
• Repair, maintenance, and testing of 4160, 2400, and 480 volt circuit breakers.
• Planned wiring and installation of equipment and fixtures including motors, Generators, switches, circuit breakers, and fuse boxes.

• Power distribution systems including 480VAC motor control centers, 480VAC to 6900VAC switchgear, related circuit breakers and control systems.
• Job Duties: Installing and maintaining all electrical circuit breakers, electrical motors, PLCs, and variable frequency drives.
• Performed maintenance and troubleshooting on air and vacuum circuit breakers and switchgear 69kv, 13.2kv, 4.6kv, 2.3kv and480v.
• Collaborated with contractors on repairs of Therma scan testing, thermal imaging of feed supply circuit breakers and panels.
• Maintained oil circuit breakers and air isolators.

Show More

average Demand

• Tested continuity of circuits to ensure electrical compatibility and safety of components, using test equipment.
• Wired computer terminals, data relay stations, and installed specialized laboratory test equipment.
• Utilized functional automatic test equipment, standalone tester and various computer-aided test stations.
• Located and determined electrical malfunctions using test equipment.
• Diagnose malfunctioning systems and components using test equipment to locate the cause of the breakdown and correct the problem.

• Test equipment, diagnose malfunctions, and correct problems by applying knowledge of electrical/electronic systems and units.
• Used hand tools, meters, test equipment, cranes, tow motors, and other equipment.
• Diagnosed malfunctioning apparatuses, such as transformers, motors and lighting fixtures, using test equipment.
• Diagnosed malfunctioning systems, apparatus, and components, using test equipment and hand tools.
• Aligned and calibrated zinc pot temperature control system using specialized tools and test equipment.

• Experienced in using hand tools, power tools, and electrical test equipment.
• Interpret manuals, wiring and mechanical schematics, and all test equipment.
• Perform maintenance on electrical test equipment * Built electrical systems
• Key Results: Test malfunctioning machinery using test equipment and discuss malfunction with other maintenance workers to diagnose the problem.
• Used test equipment such as, Saturating Hi-Pot, Megger, Hand Crank TTR, and Hot Sticks.

• Test medium and low voltage breakers using electronic, high current and other various ss test equipment.
• Diagnosed and repair malfunctions accordingly with the proper tools and test equipment when required.
• Experience using High-pot and Megger test equipment.
• Employed a variety of measuring devices and test equipment including multi meters, amp probes and meggers.
• Experienced with using standard test equipment, such as Volt OHM Meter, Amprobe and Megger.

Show More

average Demand

• Power plant operations, including electrical/mechanical maintenance and repair of generators, engines, and facilities.
• Provided electrical maintenance for all plant operations.
• Train new electricians in plant operations.

Show More

average Demand

• Fabricated parts and performed TIG, MIG and STICK welding when needed.
• Perform TIG, MIG and stick welding to fabricate or repair parts.
• Performed Maintenance Welding Tasks using TIG, MIG and STICK welding.
• Experienced in TIG, MIG, and ARC welding, rigging experience with Carry Deck 15 and 25 Ton cranes.
• Repair, Replace light fixtures Air and water plumbing, Fabricating, MIG welding, Plasma torch cutting, soldering.

• Metal fabrication including welding with stick and mig welders, use of acetylene cutting torch, and plasma cutters.
• Programmed diagnosis and manipulated robots used in Spot, Mig Welding, Adhesive Sealer and Material Handling applications.
• Fabricated rails/supports using mig and stick welders.
• Experienced in pneumatics, hydraulics, torch and plasma cutting, mig welding and arc welding lift truck p.m. and repair.
• Repaired equipment using resistance, mig, tig, stick, and hand held welding.

• Perform general maintenance fabricating in metal along with mig, tig and stick welding.
• Light fabricating, mig and tig welding.
• Arch, Tig and Mig welding.
• Program and re-program PLC driven equipment as needed.. Mig and Tig welding to fabricate parts, mounts, assemblies.
• Mastered plumbing and welding ( Mig, Arc, Tig, Brazing and soldering ).

• Forge Electrical Maintenance Preventative Maintenance Plumbing: Pneumatic, Water Welding: Arc, Mig
• fillet) Company certified to 1 unlimited ( mig ).
• Fix anything that was broke, Vehicles/Airlines/Weldingleads/Gaslines/Migwelders/Archwelders/Overhead Cranes/Also took care of new supplys for welders and rest of employees.

Show More

average Demand

• Performed installation, maintenance and repair of general facility equipment conveyor systems.
• Maintained facility including lighting of plant and conveyor systems
• Installed conveyor systems and electrical distribution systems.
• Worked on variable drives for conveyor systems and maintained the lighting and the electrical systems for warehouse, plant and offices.
• Perform and record preventative maintenance on motors, pneumatic tools, conveyor systems, electrical systems and production machines.

• Repair and maintenance of all plant equipment, including robotics, conveyor systems, hydraulic press, etc.
• Provided troubleshooting for motor control centers, load bank stations, elevators, and overhead conveyor systems.
• Maintained conveyor systems, carousels, PLC's, UPS systems, motor controls and photo eyes.
• Included but not limited to conveyor systems, forklifts, and robotic equipment.
• Performed preventative maintenance on Water chiller towers, material blenders and conveyor systems.

• Maintain and troubleshot furnaces and conveyor systems for high productive paint line.
• Repaired motors, conveyor systems, electrical fixtures, and control equipment.
• Maintain conveyor systems and box making machines
• Design and build conveyor systems.
• Maintained and repaired conveyor systems and facilities through out building and site.

• Repair Poly baggers scales conveyor systems also 480 v power Ac/D.C.
• Install AC phase inverters in conveyor systems.
• Serviced conveyor systems mechanically and electrically.Served as Maintenace Supervisor.
• repaired industrial recycling extruders, silo controllers, grinders, blower systems, conveyor systems blenders
• Installed, Maintained and Troubleshoot conveyor systems for the purpose of moving customer Product through DCs and DFCs for companies contracted.

Show More

average Demand

• Installed and Maintained PLC's, AC/DC drives, variable frequency drives including Allen Bradley, Siemens and GE equipment.
• Direct, belt, chain and variable frequency drives, DI water systems, waste water treatment.
• Tested and repaired electric motors, variable frequency drives, alarms and control systems.
• Install Motor Drive, Variable Frequency Drive for modification to existing tub lines.
• Install, troubleshoot, and repair Variable Frequency drives.

• Installed and troubleshot variable frequency drives (VFD).
• Installed and maintained PLC's, Variable Frequency Drives.
• Work with variable frequency drives and PLC's.
• Programmed and maintained Allen Bradley variable frequency drives.
• Installed and programmed variable frequency drives.

• Programmed or set parameters for variable frequency drives and light plc work Troubleshot electrical motors and their control circuits

Show More

low Demand

• Worked with teaching and repairing FANUC robots that were responsible for assembly.
• Assisted engineering initializing x, y, z axis set points for Fanuc robots with pneumatically driven limbs and grippers.
• Program and/or drive Fanuc Robots using hand-held pendant or web-page as needed to ensure quality and production is met.
• Performed Robotic and conveyor programming utilizing Fanuc RJ-2 controllers, Allen Bradley Plc-5 processors.
• Experienced and trained to perform maintenance on GE Fanuc Robotics.

• Performed maintenance and setup of Fanuc robots.
• Maintain and Repair Fanuc Robots.
• Attended Fanuc Robot maintenance school.
• Worked with Allen Bradley 5000 PLC's, device net circuits, Fanuc R-2000 robots.
• Calibrated Fanuc and Hirata robotic platforms as needed.

• Maintained automotive production lines and machinery,including Fanuc robots, CNC's, PLC's
• Utilized computer software for troubleshooting of GE Fanuc PLCs.
• Machine building and Fanuc robotics programing.
• Completed a Mori Seiki Fanuc ladder diagram diagnostics troubleshooting class.
• Work with Mitsubishi PLC logic, Fanuc & Kawasaki Robotics, Okuma Lathes and Cognex Vision Systems.

• Perform path touchup of Motoman, and Fanuc robots in spot welding and material handling applications.
• Job Duties: Troubleshoot Fanuc controlled Shiron CNC machines, and Okuma CNC lathe machines.
• Repair and maintenance of cnc lathes with Fanuc, Mitsubishi and Yaskawa controls.
• Installed input devices from Telemecanique, Keyence, Allen Bradley, Pilz, Squair-D, Fanuc, Mitsubishi and Cutler Hammer.
• Program Cnc Lathes and Machining Centers, Mazak, Okuma, Haas, Fanuc Tape Drill, and Fanuc robot welders.

Show More

low Demand

• Support mechanics with hydraulic and pneumatic systems and mechanical repairs.
• Tested troubleshoot electrical, hydraulic and pneumatic systems.
• Gained proficiency in hydraulic and pneumatic systems.
• Repair and PM of all plant electrical systems while applying mechanical aptitude for the repair of electrical and pneumatic systems.
• Maintained hydraulic systems, pneumatic systems, electrical systems, gas equipment, diesel equipment, HVAC and AC/DC systems.

• Vacuum material handling systems (pneumatic), Proficient in both hydraulic and pneumatic systems and applications.
• Maintain, diagnose, replace and install plant electrical, hydraulic and pneumatic systems.
• Maintained hydraulic systems, pneumatic systems, electrical systems and AC/DC systems.
• Deal with Electrical, hydraulic, pneumatic systems threw out the day.
• Solved problems with pneumatic systems involving pneumatic valves, and switches.

• Repair of hydraulic and pneumatic systems throughout the plant.
• Diagnose, replace and install hydraulic and pneumatic systems
• Maintained hydraulic systems, pneumatic systems, electricalsystems, HVAC and AC/DC systems.

Show More

low Demand

• Maintained and repaired mechanical and electrical equipment necessary for building, repairing and periodical revision of existing submarines in shipyard.
• Installed necessary components to existing machinery for better performance.
• Solder electronic and electrical connections.
• Installed and connected wires to circuit breakers, transformers, outlets, electrical components and electrical systems.
• Examine electrical units for Lose connections and broken insulation and tighten connections, using hand tools.

• Disconnected voltage regulators, bolts, and screws, and connect replacement regulators to high-voltage lines.
• Installed ground leads and connected power cables to equipment, such as motors.
• Installed Fiber Optic Connectors, and tested connections, Electrical Construction Remodel.
• Connect Wires to Circuit Breakers, Transformers, or other Components.
• Support team building efforts by assisting other divisions where necessary.

• Maintained fire hose connections and water valves for fire systems.
• Replace Electrical panels, disconnects and control equipment as needed.
• Fabricate and Install 480vac Disconnects containing 120v motor starters.
• Connected and disconnected wiring, piping and tubing.
• Insure proper installation to NEC and safety.

• Disconnected and removed motors and pumps.
• Connect all kinds of motors.
• Responded to emergency calls in an efficient manner; made necessary electrical installations and repairs.
• circuit board assembly, inter-connect cable assembly.
• Repair machines as necessary including the fabrication of parts .

Show More

low Demand

• Alternate 13,800 volt switch gear and breaker experience DC drive, VFD, and PLC logic and ladder logic troubleshooting experience.
• Created 2 rungs on the Ladder Logic for air processing sensor, which determined correct air flow in parts.
• Install, troubleshoot and maintain various AC/DC drives and control wiring including use of Rockwell/Siemens PLC ladder logic software.
• Develop, debug and maintain PLC ladder logic for new and existing machinery through use of ControlLogix.
• Interpret electrical schematics, wiring diagrams, control and PLC Ladder logic for trouble shooting purposes.

• Utilized Equipment diagnostics, schematics, ladder logic diagrams, and other machine manuals.
• Experienced in reading and interpreting blueprints, ladder logic and schematics diagrams.
• Trouble shooting included Ladder Logic, Function Block Program Troubleshooting.
• Updated and created electrical schematic drawings and ladder logic diagrams.
• Work with PLC's and ladder logic to continue production.

• Use ladder logic in the troubleshooting all controls relays.
• Used complex PLC systems and, modified ladder logic.
• Interpret ladder logic, control schematics and engineering drawings.
• Function block, ladder logic and statement list.
• Used Siemens Ladder Logic to program the equipment

• Review and editing programs, ladder logic.
• Trouble shooting ladder logic and Step.
• Added graphics and ladder logic for new conveyors to panelview and associated processor.
• Convert ladder logic to IFix for operator control.
• Trouble shooting PLC inputs/outputs, plc ladder logic.

Show More

low Demand

• Maintain Safe and clean working area, follow all safety guidelines including but not limited to LOTO, OSHA, ISO9004.
• Maintain compliance with safe working practices including Arc Flash 70E compliance and related OSHA safe working standards.
• Adhered to all OSHA safety requirements while working at the plant location and reported unsafe conditions.
• Help bring company under OSHA guide lines in all areas of safety, improved work conditions.
• Followed OSHA regulations, MSDS sheets, NEC electrical codes and Lock out Tag out procedures.

• Educated in safety techniques using proper PPE, hold OSHA 10, TWIC and CPR certification.
• Utilize 5S, OSHA standards and MSDS to ensure a safe work environment.
• Served as safety facilitator to ensure compliance with OSHA and NFPA regulations.
• Certified confined space, OSHA 10, and fork truck operator.
• Follow All NEC and California OSHA safety standards.

• Complied with all local codes, NEC, safety procedures, OSHA, EPA, waste handling rules and job specs.
• Complied with all NEC, OSHA and job specs.
• Follow NEC and OSHA standards.
• Strived to meet or exceed safety standards that were put forth by OSHA guidelines.
• Ensured all equipment and machines complied with Osha safety regulations.

• Assisted in updating machinery to meet OSHA requirements.
• Certified in OSHA "A", "B", "C" level of protective clothing.

Show More

low Demand

• Maintained and repaired various welding equipment, hydraulic systems and other equipment
• Work with mechanical maintenance on troubleshooting pneumatic and hydraulic systems.
• Perform routine and preventative maintenance on all machines within the facility, including conveyors, motors, pneumatic/hydraulic systems, etc.
• Maintained electrical, electronic, pneumatic, and hydraulic systems, used in the production of specialty metal products.
• Supervised complete upgrade of second metal forming machine to CNC including electrical, pneumatic and hydraulic systems.

• Maintain and troubleshoot electrical, pneumatic and hydraulic systems for paper making, converting and facilities systems.
• Diagnose and repair electrical, mechanical, pneumatic and hydraulic systems.
• Work on pneumatic and hydraulic systems and rewire casting machines.
• Possess knowledge of Pneumatic and Hydraulic systems.
• Have a good understanding of hydraulic systems.

• Worked on pneumatic and hydraulic systems.
• Experience with pneumatic and hydraulic systems.
• Perform maintenance of hydraulic systems.
• Read and write schematics for pneumatics and hydraulic systems and build them Operate all shop tools; Ex.
• Maintain a clean and safe work place Knowledge of hydraulic systems Welding and Fabrication Changing out motors, pumps, and cylinders

Show More

low Demand

• Installed EMT/Rigid conduit to relocated equipment.
• Applied copper, installed PVC piping, installed drywall, and bent conduit EMT.
• Installed electrical circuits by bending and installing EMT and rigid metal conduit.
• Replace corroded EMT with PVC in an area with corrosive vapors.
• Installed EMT conduit and wiring for new electrical services.

• Installed rigid conduit, EMT and cable trays.
• Coordinated rigid and EMT conduit runs for projects.
• Installed conduit, EMT, PVC, pull wire, set transformers and gears.
• Run various types of conduit, Rigid, EMT and Flex types.
• Run EMT, RGC, and Aluminum conduit.

• Arranged wiring, fixtures, and ran EMT/Rigid conduit boxes in preparation for installations Installed all receptacles both suspended and stationary.
• Job Duties consist of - Running And bending Conduit-EMT, rigid mostly all electrical job duties in Industrial Field.
• Install conduit of all types and size to include flexible, emt, and rigid conduit.
• Run electrical conduit, emt, ridgid.
• Run ridged, emt and pvc conduit.

• Installed circuits for power and lighting using 1/2in to 2 in emt, rigid, pvc, and mc cable.
• Worked with RMC and EMT conduit from " to 4" as well as flex and other material.

Show More

low Demand

• Worked with Allen-Bradley programmable controllers.
• Monitor and modify PLC code including Leeds and Northrup DCS as well as various Allen-Bradley PLC families.
• Use of Rockwell Automation software and Allen-Bradley SLC 500 and PLC 5 systems.
• Worked with Allen-Bradley PLC devices, as well as relay logic controls.
• Use Allen-Bradley PLC software to program and solve electrical malfunctions.

• Worked with Computer-Process Management, and PLC controls, including Allen-Bradley SLC500, Micrologix, and Cutler-Hammer.
• Attended Allen-Bradley courses for extensive training in the development and operation of Logix programs.
• Trouble shooting various PLC systems (Allen-Bradley, Omron, Siemens).
• Installed and programed Toshiba and Allen-Bradley invertors.
• Worked with allen-bradley PLC's, Teledyne, and Keyence vision systems.

• Trouble shooting and programing of Allen-Bradley Contrl Logix 5000 and Compact Logix Family of PLC systemsutilizing RSLogix 5000 program.

Show More

low Demand

• Coordinate and oversee new construction projects in conjunction with outside electrical contractors, ensuring all work was performed to hospital specifications.
• Installed new construction conduit runs, pulled wires and cables and terminated ends for new or relocated pieces of equipment.
• Worked with electrical contractors to ensure that new construction being performed was installed to the current National Electric Code.
• Installed conduit, wiring and devices for new construction and renovation projects in accordance with the NEC.
• Supervised line crew's new construction and maintenance overhead and underground 480-12KV high voltage electric distribution system.

• Perform install on new construction projects including following blue prints and install as per NEC.
• Performed all electrical maintenance and new construction at sites in Knoxville and Nashville, TN.
• Installed new construction and maintenance of power and control systems at large oil process plant.
• Completed tear-down of existing structures and prepared for new construction.
• Ordered material, ran underground for new construction.

• Work on maintenance and new construction sites.
• Wire new construction and construction additions.
• Plant maintenance and new construction.
• Provided new construction and maintenance support for entire production facility, including mechanical, hydraulics, electrical, instrumentation and pneumatics.
• Performed minor and major electrical maintenance as well as new construction of 120v-277v lighting fixtures (e.g.

• Worked on various projects, new construction, remodels and repairOf existing electrical installations.
• Remodel of all Chacho Restaurants, maintenance of equipment, and new construction.
• Performed small in house new constructionprojects, managed inventory for the electrical shop.
• Installed electrical systems into new construction projects Installation of communication systems Modification and repair of systems
• contract New construction, install industrial and commercial.

Show More

low Demand

• Repair and maintenance of all manufacturing equipment such as ABB Robotic Welders and Grading and Lewis CNC Milling Machines.
• Poured new Babbitt bearings weighing 40lbs each in gang saws and inserted grease grooves.
• Repaired and maintained presses, hoists, cranes and ABB robots.
• Diagnose and repair Panasonic, ABB, and ORII robots.
• work on conveyors replacing bearing and chains Accomplishments install electrical conduit and wiring for four new ABB robots.

• Diagnosed first and last Red Rabbit parts to test for malfunctions and verify parts are to spec.
• Program, wire, troubleshoot, and maintain Nachi and ABB robots.
• Repair and reprogram FANUC robodrills/robots and ABB robots.
• Operated and maintained 34.5 KV ABB switchgear.
• Worked with Fanuc, ABB and Kawasaki robots recovering from crashes and repairing faulty equipment.

• Experienced on Siemens PLC , Yaskawa and ABB AC drives
• Trouble shooting problems with GE Fanuc PLC's, ABB, Baldor, and Yokogawa drives.
• Worked on Allen Bradley SLC 500-5000, Modicon PLCs and ABB VFDs.

Show More

low Demand

• Obtained detailed understanding of contract requirements and ability to implement required processes and systems in a tight time-frame.
• Review electrical wiring schematics during the investigation of equipment failure to make an accurate decision to repair.
• Investigate and report information on outside electrical projects!
• Managed safety incident reporting and investigation.
• Respond to all Fire Alarm Life Safety incidents by leading the preliminary investigation of areas in question.

• Investigated power feeds of tenants to properly sub-meter tenant spaces and to update one line drawings.
• Ensured schedule risk assessments are performed to identify and mitigate program cost and scheduling risks.
• Perform infrared inspections, investigate & analyze anomalies, and create detailed reports recommending repairs.
• Used Arc and TIG methods to weld flat, cylindrical and irregular electrical connector-related parts.
• Investigate complaints about service and equipment, and take corrective action.

• Provide the best possible reason for equipment failure during investigations.
• Investigate and resolve problems; devise and implement solutions.
• Experience in using TIG welder, acetylene torch.
• Clean and Grease Knife Switches and Tighten Lugs.
• Investigated and resolved problems as they occurred.

• Repair and maintain welders, CNC, TIG, and Stick.
• Examine electrical units for loose connections and out of order insulation and make connections tighter, using hand tools.
• Experienced in tig and gas welding.
• Received the prestigious "2012 Frito-Lay Leadership Circle Award".
• Installed electrical equipment, preformed Arc and Tig welding, replaced bearings on motors and exhaust fans.

Show More

low Demand

• Installed conduit and repaired damaged electrical application: receptacles and light fixtures.
• Maintain, repair, troubleshooting of sheet metal fabrication machines, replace old lighting with proxy sensor LED light fixtures,
• Performed general electrical work, including installation of switches, light fixtures and rewiring.
• Use ladders, lift and aerial equipment to reach light fixtures.
• Install and maintain light switches, light fixtures, outlets, ballast

• Install receptacles, light fixtures, ceiling fans, etc.
• Replace light fixtures as needed.
• Build light fixtures and change ballast
• Rebuild and replace high bay, 400 watt metal halide light ballast, install and maintain T5 and T8 light fixtures.
• light fixtures and 110 recepts * Replace old cable trays and wires.

Show More

low Demand

• Preformed maintenance work on several automotive electronic assembly Lines.
• Organize and assemble electrical hardware for assembly line machinery.
• Aided in start-up of new state-of-the-art automated assembly line.
• Performed routine, emergency, and preventive maintenance and repairs as required in plant production and assembly line equipment.
• Install and maintain production line for Plant Fuji Repair assembly line machines Install new equipment/machines General Electrical work

• Maintain and repair assembly line for problem to assure the loss of production time.
• Assisted in layout and programming of PLC's for assembly line processes
• Make sure that assembly lines are productive and well run.
• Assist in bringing in new automated assembly lines.
• Maintained assembly line and welding department.

• Maintain assembly line equipment and automated welding machines Machined replacement parts for equipment that was designed and engineered in house
• Maintained and repaired installed electrical systems on assembly line Maintained the records of all electrical equipment.
• Installed new electrical circuits including devices, motor drives, new assembly lines, plant lighting.
• Plant maintenance including robots, CNC's, heavypresses, a variety of PLC's, integrated cellcontrollers, assembly lines
• Repair factory and assembly line equipment.Repair factorylighting.Added circuits as needed.

Show More

low Demand

• Install, troubleshoot, and program GE & Allen Bradley PLC's, troubleshoot relay logic.
• Worked on PLC systems, Relay Logic systems, Frequency Drive systems.
• Assemble relay logic panels (relays, timers, counter etc.)
• Trouble shooting and repair of PLC and Relay logic based systems.
• Handled 120V to 480V 3 phase electrical power distribution.Designed and installed PLC and relay logic control systems on injection molding machines.

• Relay logic, plc, lathe, grinding, coating, dip tanks, chroming, packaging, engraving machines.
• relay logic and PLC) and equipment.

Show More

low Demand

• Coordinate the maintenance and repair of all electrical systems including production machinery, plumbing systems and pneumatic/vacuum systems.
• Perform Electrical/Mechanical repairs to various Production machinery, to include Overhead Cranes
• Identified problems with the production machinery and determined corrective actions.
• Repair and maintain high-speed aerosol can production machinery.
• Repair industrial lighting and production machinery.

• Install electric service and production machinery.
• Repaired poorly maintained production machinery.
• Work on new installations, and production machinery troubleshooting, upgrades of machinery, PLC troubleshooting, along with mechanical maintenance.
• Maintained all areas within the facility equally, (plumbing, electrical service and production machinery).
• Rewire, create schematics and standardize electrical and mechanical parts far all production machinery.

• Maintain, troubleshoot, repair of production machinery and equipment.
• Designed controls for production machinery built in house.
• Repair and maintain high speed production machinery.
• Maintain production machinery, troubleshhot and make repairs and installations of electrical equipment and machinery.
• Preformed troubleshooting and repairs of motors and control Systems, on all plant production machinery.

• Repair, and maintain production machinery for processing styro foam.
• Trouble shoot, repair production machinery .
• Maintained and repaired production machinery including Cincinnati Milacron and K&T Computer Numerically Controlled (CNC) 5-axis milling machinery.
• Perform weekly pms on production machinery .

Show More

low Demand

• Install, calibrate, monitor, modify, program, maintain and repair HMI and DCS control instrumentation.
• Assist in the optimization and maintenance of converting lines and conveyor systems including PLC and HMI changes.
• Modified and programmed Human Machine Interfaces (HMI) using Factory Talk View and Panelbuilder32 software.
• Improved layout and design of WonderWare HMI pages associated with Reheat Furnace controls and monitoring.
• Install, troubleshoot, and modify PLC programs including PanelView and GOT HMI.

• Retrofit equipment with new hardware and software including PLC and HMI interface controls.
• Install, program and troubleshoot Human Machine interfaces (HMI).
• Develop and troubleshoot HMI projects utilizing Factory Talk View Studio.
• Installed and developed HMI interfaces.
• Worked closely with RSLogix and RSView32 HMI; also troubleshoot SLC 500 and Automate programmable logic controllers.

• Program PLC's, versa views, panel views and HMI's.
• Program, Install and Commission: PLCs, HMIs, Servo Drives, Motion Controllers and AC/DC Drives.
• Program furnace temperatures on the plc & hmi's on Siemens and allen Bradley systems.
• Trouble shooting and programing of Allen-Bradley HMI devices utilizing Panel-View and RSView programing platform.

Show More

low Demand

• Designed, assembled, and installed an AB SLC 500/Honeywell Control System that replaced the outdated T.I.
• Experienced in PLC 5 family processors, SLC 500-504 series, power distribution, and control wiring.
• Use SLC 500, PANELVIEW, PLC2, PLC5, ALLEN BRADLEY and others to diagnose equipment.
• Trouble shoot and repair Allen Bradley SLC-5, 500 and Siemens PLC's.
• Worked with pneumatics, hydraulics, Allen Bradley SLC-5, 500 PLC's and Blow molding equipment.

• Program PLCs including, Allen Bradley PLC5 and SLC500 series.
• Wire and repair electrical control panels utilizing Allen Bradley Micrologix, SLC500, Compactlogix, and ControlLogix PLC platforms.
• Design programming, PLC's andSLC's Running pipe.
• Experienced with Controllogix, Compactlogix, Micrologix, and SLC500.

Show More

low Demand

• Recruited to work at the Tulsa International Bus Plant for new installations, troubleshooting of existing equipment, and safety overview.
• Run conduit and install equipment for new installations as well as respond to problems that come up during the shift.
• Read, analyze & utilize blueprints & schematics regularly for troubleshooting; to implement repairs & new installations.
• Oversee and trouble shoot all new installations to maximize the potential of the machinery.
• Size electrical equipment, raceways, and conductors for new installations and updates.

• Have installed, and commissioned numerous projects for new installations and equipment upgrades.
• Updated and new installations of electrical systems at MN State Fair grounds.
• Installed bus plugs pipe and wire for new installations.
• Worked with maintenance engineers to complete new installations.
• Edit programs for new installations.

• Perform electrical maintenance on equipment *Follow electrical blueprints for new installations
• Maintained all electrical equipment and made new installations andUpgrades.
• work on all new installations of equipment.

Show More

low Demand

• Maintained all electrical systems Serviced and programmed several types of PLC lighting and machine systems Troubleshoot electrical problems Installed new machinery lines
• Read blueprints, installed conduits and wire ways, installed, connected and tested new machinery.
• Install new machinery and equipment and move machinery and equipment to affect layout changes as required.
• Updated service record files on equipment drawings and history.built new machinery, and conveyors
• Designed and programmed PLC control systems in the construction of new machinery.

• Installed new machinery and maintained all equipment and overhead cranes.
• Install new machinery and related parts.
• Install new machinery as needed.
• Work closely with engineers during machine relocations or new machinery installations, addressing any electrical concerns.
• Installed new machinery Skills Used I became very profecient at running conduit and had the ability to troubleshoot electrical problems.

• Installed new electrical equipment Installed new machinery In charge all day to day electrical operation
• Provide maintenance for all equipment, PLCs, installation of new machinery, PMS electronic troubleshooting on production lines.
• Service all types of system maintenance Trouble shooting machinery Setup of new machinery.

Show More

low Demand

• Performed general mechanical repairs on first draw, second draw, single block, and annealing machines when breakdowns occurred.
• Perform electrical and mechanical repairs on machine shop equipment including CNC's, mills, surface grinders and lathes.
• Performed electrical and mechanical repairs on equipment used in the manufacture and packaging of plastic sheeting and trash bags
• Changed out molds and blocks on Aluminum casting equipment and also preformed mechanical repairs on pump systems.
• Performed necessary electrical, hydraulic, and mechanical repairs on a Cold Roll Steel Plant.

• Order parts.electrical, plumbing, mechanical repairs and installs.
• Assist with mechanical repairs and inspections when needed.
• Performed mechanical repairs on the factory water system.
• Handle all electrical and mechanical repairs pertaining to plant equipment electrical supply systems.
• Performed general electromechanical repairs on client systems and equipment, including single phase and three phase motors

• Performed electrical and mechanical repairs including PM's as part of a composite maintenance workgroup.
• Machine Tools, All Facilities andMachine Electrical/Mechanical Repairs, and all CNC Repairs
• Performed general electromechanical repairs on plant systems and equipment; ensuring adherence to code requirements.

Show More

low Demand

• Program and troubleshoot programmable logic controllers.
• Maintained the Programmable Logic Controllers, Variable Frequency Drives, Human-machine Interfaces, and all field equipment necessary for plant operation.
• Serviced and maintained 3 Rockwell Programmable Logic Controllers (PLC) and SCADA system.
• Worked with programmable logic controllers and Allen Bradley drives used to maintain operation.
• Installed, maintained and troubleshot Allen Bradley SLC/500 programmable logic controllers.

• Serviced and maintained 3 Allen-Bradley Programmable Logic Controllers (PLC).
• Control wiring experience with relays and Programmable Logic controllers.
• Use Programmable Logic Controllers to adjust and trouble shoot automated equipment including an autoloader system the feed 28 injection molding machines.
• Modified and developed programs in Programmable Logic Controllers (PLC) using RSLogix 5000/500/5, and PicPro software.

Show More