Maintenance electrician jobs in Lewisville, TX

To complete inspections and repair of electrical equipment including rides and other park facilities. Responsibilities: Specific Duties and Responsibilities: Repair electrical and electronic equipment Analyze equipment malfunctions to determine cause and corrective action Access all areas of ride structures for inspections and maintenance Install adequate temporary and/or permanent power for events and festivals throughout the season Assist with various electrical needs for new construction and remodeling projects as assigned Climb stairs or ladders to heights over 50ft while carrying tools and equipment and be able to use them Maintain positive interaction with other employees and guests Other tasks and duties as assigned Qualifications: State Journeyman's license preferred Theme park ride experience a plus Must be experienced in maintaining and troubleshooting equipment using PLC, and relays Experience in installation, repair, and maintenance of electrical equipment Able to stand and walk for long periods of time outdoors in extreme heat/cold and sun Able to carry tools and lift at least 50lbs Must be comfortable working at heights over 50ft Must be able to work a rotating schedule including nights, weekends, holidays, and extended shifts as needed Must possess a valid Driver's License with a good driving record Must be at least 18 years of age

Specific Duties and Responsibilities: Repair electrical and electronic equipment Analyze equipment malfunctions to determine cause and corrective action Access all areas of ride structures for inspections and maintenance Install adequate temporary and/or permanent power for events and festivals throughout the season Assist with various electrical needs for new construction and remodeling projects as assigned Climb stairs or ladders to heights over 50ft while carrying tools and equipment and be able to use them Maintain positive interaction with other employees and guests Other tasks and duties as assigned Reporting Structure: Reports to the designated Electrical Foreman Skills and Qualifications: State Journeyman's license preferred Theme park ride experience a plus Must be experienced in maintaining and troubleshooting equipment using PLC, and relays Experience in installation, repair, and maintenance of electrical equipment Able to stand and walk for long periods of time outdoors in extreme heat/cold and sun Able to carry tools and lift at least 50lbs Must be comfortable working at heights over 50ft Must be able to work a rotating schedule including nights, weekends, holidays, and extended shifts as needed Must possess a valid Driver's License with a good driving record Must be at least 18 years of age

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs competent break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to determine root cause of problem; dismantling devices to gain access to and remove defective parts; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; and performing troubleshooting and repair of electrical circuitry and mechanical systems. · Identifies parts, supplies and repair items as necessary for equipment maintenance and repair. · With minimal instruction, performs maintenance as per industry standards. · Works with customer counterparts to execute maintenance, reliability, and preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, and applicable management systems. · Performs routine processes with and within industrial control systems to troubleshoots and analyzes complex equipment, perform equipment maintenance, and to resolve equipment problems. · Utilizes in-depth application of electrical, mechanical, and fluid power aptitude to troubleshoot and repair equipment. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Must be able to use basic hand tools and specialized tools as appropriate. · Possesses working knowledge and experience regarding electrical, mechanical, and fluid power systems in related fields. Can analyze the problems, synthesize alternative solutions, and perform repairs · Extensive travel required. (Local, National, International). Desirable KSAs: · Experience in preventative maintenance techniques, precision measuring, mechanical alignments, and general maintenance of applicable process equipment. · Exposure to programmable logic controllers, field devices, and electrical drive and motor systems. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Duties and Responsibilities is fully remote in that you must be able to travel 100% of the time to the job site. Must be fully qualified and capable of working directly with project management to understand and evaluate scheduled electrical work needed to complete projects in a timely manner. Must be capable of performing all duties associated with the crew lead position and in addition. Must be able to self-prepare for all scopes of electrical work needed by evaluating pictures from site assessment and communicating directly with the project management and design team about any necessary changes or improvements to the electrical plan set. These changes must be documented and sent to the project management team. Must maintain tools and materials needed to “adapt and overcome” any challenges in the field including utility shutdowns. Must be capable of communicating at a high level with city inspectors. Must maintain a 90% or higher pass rate on all electrical equipment wall installations and maintain less than 10% of service calls generated by installation-related quality issues. Must be capable of cross-training and crew development when assigned to supervise and support solar installation crews, allowing roof crew leads to self-perform installations while maintaining consistent quality by performing and documenting (pictures) quality control checks at specific points during the installation process. Must be capable of supervising the crew while the electrical apprentice ( roof lead or other designated person by management) gets to experience electrical wall installation and service upgrades. Must have required personal tools of the trade, see “minimum required personal tools of the trade”. During the first 90 days you will be required to learn how to install Tesla Powerwall coupled with Enphase solar systems. We will be looking to you to run your own crew with a helper installing power walls and solar systems. By the end of the 90 days, you will be required to take a proficiency test. This test will include you installing a complete battery and solar system without the help of the lead electrician at Good Faith Energy. You must pass this test to be a lead electrician for Good Faith Energy. We will provide you with all the on-the-job training as well as classroom materials to advance your knowledge of the systems you will be installing. Attends all meetings and conference calls. Performs consistently with company core values Maintains strict confidentiality. Provides excellent customer service, for both internal and external customers. Follows all OSHA and other safety guidelines. Actively demonstrates teamwork at all times. Adheres to company safety standards at all times, such that no serious (requiring medical attention) injury occurred during the prior 12-month period. Follows other policies and procedures such that there are no verbal or written warnings during the evaluation period. The duties described above are not inclusive. Additional duties may be permanently assigned or required from time to time due to the need to respond to customer needs and remain competitive in the marketplace. Minimum Knowledge, Skills, and Abilities Required Journeyman License (or be able to obtain the license) Pay will be based on license type Must be able to lift up to 75lbs. Must have a valid driver's license. Must be OSHA 10 certified. Must be qualified to operate company equipment (may include truck, trencher, man lift, forklift) and capable of operating any heavy equipment on the job. Proficient in the proper use of safety gear and training/supervising for working above 6' from the ground, roofs, ladders, etc. Must be CPR certified. Read all installation product manuals for devices installed. Communicate effectively through all work-related chat/email chains while maintaining consistent quality by performing and documenting (pictures) quality control checks at specific points during the installation process.

An Electrical Control Technician at Encore Wire will be primarily responsible for the safe rectification of machinery and equipment used in the various production plants and throughout the facility as directed by Supervision or Company dictated equipment priority. The Control Technician must be able to work on all facility wide electrical systems. A good understanding and experience of all mechanical and electrical disciplines is needed, these would include hydraulics and pneumatics. Essential Job Functions Experience and technical knowledge of the operation of AC and DC drives. A thorough understanding of speed feedback devices theory and operation. An understanding of temperature control and temperature components. A good understanding of PID and control loops. A good understanding of Ethernet communications and connections. Proficient in PLC and HMI systems, to include communications drivers and connections, PLC program navigation and controlled manipulation. A thorough understanding of all electrical components and electronic devices. Show an understanding and demonstrate the processes involved in diagnosing defective components, motors, drives and electronic components. Able to demonstrate the ability to use diagnostic equipment. Experience with selecting electrical components when original OEM components are not available. Other Skills/Abilities The candidate must be a Team player and be willing to share his knowledge freely. The candidate will be required to work with all team members undertaking any and all roles from leading a task to cleaning up after a task. A successful team member will have extremely good work ethic and a great punctuality and attendance record. Physical Requirements Requires repetitive movement Requires walking Requires kneeling, crouching and stooping Requires using hands to handle, control, or feel objects, tools or controls Requires lifting up to 50 pounds while bending, twisting and/or standing

🚨 We're Hiring: Maintenance Manager - Food Manufacturing | Dallas, TX 🛠️ Are you a hands-on leader with a passion for equipment reliability and team development? Join our growing food manufacturing team in Dallas, TX as a Maintenance Manager and help drive performance, safety, and innovation-especially in packaging operations. 🔧 What You'll Do: Lead and develop a team of supervisors and mechanics across all shifts. Drive uptime, equipment reliability, and overall equipment effectiveness (OEE). Champion safety, cost efficiency, and continuous improvement. Collaborate cross-functionally to solve operational challenges. Manage vendor relationships and ensure timely service delivery. Conduct training and development programs for maintenance staff. Maintain building and grounds to meet safety and operational standards. 🎯 What We're Looking For: Bachelor's degree or equivalent experience (Engineering, Operations, etc.). 5+ years of maintenance experience in manufacturing; 2+ years in leadership. Strong background in packaging equipment within food manufacturing. Lean Six Sigma experience preferred. Proven project management and problem-solving skills. Strong leadership and communication abilities. 🌟 Why You'll Love It Here: Competitive pay and benefits Opportunity to lead impactful initiatives Collaborative, safety-first culture Career growth in a thriving industry 📍 Location: On-site in Dallas, TX 📅 Schedule: Full-time, multi-shift leadership 🔗 Ready to lead the way in maintenance excellence? Apply now or share with someone who'd be a great fit!

Lone Star Staffing is looking for a Maintenance Manager in the city of Irving, TX. Are you comfortable working in a Cooler Environment? Apply today! Shift: TBD Pay: $52-$55K Benefits: Medical, Dental, AD & D, Bonus Job Purpose: Maintenance Manager will supervise and assign the work of maintenance employees in the general maintenance and upkeep of buildings, grounds, and equipment. Supervise the day-to-day activities of the maintenance employees. Responsible for maintaining electrical, plumbing, mechanical, and related systems. Essential Duties and Responsibilities: - Ensure housekeeping and cleanliness of all work areas. Ensure products are placed in the proper receptacles. Ensure dock areas, outside dock areas, aisles, break areas, bathrooms and shipping offices are organized, clean, free of debris, and in good working condition. - Determine material, equipment, and supplies to be used. Transfer equipment and personnel from one project to another as necessary. - Make periodic inspections of assigned facilities to determine condition;diagnose problems and initiate necessary actions. - Plan and schedule routine maintenance. Establish work priorities. - Maintain equipment and materials;perform complex repair and maintenance tasks. - Supervise staff of skilled and semi-skilled workers in maintenance such as, painting, carpentry, plumbing, heating, air-conditioning, electrical and related systems. - Inspect work for completeness. - Perform other duties as assigned Minimum Requirements: - Eighteen months of education and training beyond high school level in general maintenance and repair, or a closely related area. - Two years experience in general maintenance or other maintenance responsibilities that would include the ability to recognize electrical, plumbing, and mechanical malfunctions or equipment failures. Education and/or Experience: - 2 years technical school and 3 years experience in closely related field work. - Strong English skills, reading, written and verbal Computer Skills: - Experience in Microsoft Windows and Office softwar Reasoning Ability: - Must be able to interact with all levels of management. Must be able to manage and lead a diverse workforce. - Ability to make independent decisions as needed. - Solve problems with little direction - Demonstrate ability to examine the logical relationships between conclusions and their supporting assertions. - Must be able to draw conclusions from facts and evidence. Physical Demands: - The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. - Lifting up to 30lbs - Standing for long periods at a time - Climbing stairs, plenty of walking Work Environment: - The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. - Ability to work in a Distribution Center environment with a variation of temperatures

Job Title: Maintenance Manager Pay: $52,500 per year + potential bonus Note: This operation runs 24/7, and individual schedules are determined by volume and client needs. Weekend availability is required and the facility is only closed three days each year. Job Purpose: Under the direction of the Maintenance GM, this position supervises and coordinates the work of maintenance staff responsible for the upkeep of buildings, grounds, and equipment. The role oversees daily maintenance activities and ensures the proper functioning of electrical, plumbing, mechanical, and related systems. Essential Duties and Responsibilities: Maintain cleanliness and organization of all work areas, including dock areas, aisles, break areas, bathrooms, and shipping offices. Ensure all areas are free of debris and in good working condition. Determine necessary materials, equipment, and supplies for maintenance tasks. Transfer equipment and personnel between projects as needed. Conduct regular inspections of assigned facilities to assess conditions, diagnose issues, and initiate corrective actions. Plan and schedule routine maintenance activities, setting work priorities as necessary. Perform complex repairs and maintenance of equipment and systems. Supervise a team of skilled and semi-skilled workers in areas such as painting, carpentry, plumbing, HVAC, electrical, and other related systems. Inspect completed work for accuracy and quality. Perform other duties as assigned. Minimum Requirements: Eighteen months of post-high school education and training in general maintenance, repair, or a closely related field. Two years of experience in general maintenance or a related role, with the ability to identify electrical, plumbing, and mechanical issues. Education and Experience: 2 years of technical schooling and 3 years of experience in a closely related field. Strong proficiency in English, both written and verbal. Computer Skills: Proficient in Microsoft Windows and Office software. Reasoning Ability: Ability to interact with all levels of management and lead a diverse workforce. Capable of making independent decisions when necessary. Problem-solving skills with minimal direction. Able to assess logical relationships between conclusions and supporting evidence. Draw conclusions based on facts and evidence. Physical Demands: Must be able to lift up to 30 lbs. Ability to stand for extended periods. Frequent walking and stair climbing. Work Environment: Work is performed in a distribution center environment with varying temperatures. Reasonable accommodations will be made for individuals with disabilities to perform essential job functions. Disclaimer: This job description outlines the general nature and level of work expected but is not an exhaustive list of all duties, responsibilities, or requirements. Employees may be required to perform other tasks as needed. ABOUT ACCURATE PERSONNEL Do you need your next job fast? Accurate Personnel is here to help! As an industry-leading full-service staffing agency, we have all the tools you need to start earning that next paycheck soon. Send us your application and our team will instantly get to work on finding you the right placement to fit your needs. Accurate Personnel has been a provider of temporary job services and direct hire search for 45 years. Our expertise has allowed us to grow from a regional Chicagoland office into a nationwide search firm that services over 500 clients while never losing sight of personalized service. Let Accurate work for you. Apply with us today! --- Accurate Personnel provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Ecolab, the global leader in premium cleaning, sanitizing and maintenance products and services for the hospitality, institutional and industrial markets is seeking a Maintenance Technician. This role will perform regularly scheduled preventative maintenance, monthly safety checks, make repairs and modifications to equipment and repair the facility as needed. What's in it For You: The opportunity to take on some of the world's most meaningful challenges, helping customers achieve clean water, safe food, and healthy environments The ability to make an impact and shape your career with a company that is passionate about growth The support of an organization that believes it is vital to include and engage diverse people, perspectives and ideas to achieve our best Comprehensive benefits package starting day one of employment including medical, dental, vision, matching 401k, company paid pension, stock purchase plan, tuition reimbursement and more! Click Here to see our benefits. What You Will Do: Interface with production/warehouse supervision to effect safe repairs to equipment and ensure that equipment is returned to operations in an acceptable condition Perform regularly scheduled preventive maintenance and monthly safety checks Make repairs & modifications to equipment and facilities as scheduled through the work order system Responsible for completing all paperwork assigned and coordinating with the Reliability Supervisor to ensure data is correct and recorded Other duties as assigned Position Details: Plant location: Garland, TX Work week and shift: C shift - Monday to Friday, 9:30PM - 5:30AM Compensation package offered: $32.00 per hour Minimum Qualifications: High School diploma or equivalent 2 years of experience in an industrial maintenance environment 1 year of experience with electrical and mechanical systems in an industrial environment Ability to read and understand manuals and schematics in English No immigration sponsorship offered for this role Physical Demands: Must be able to lift/carry 50lbs Able to work in difficult situations such as confined spaces, heat, and heights Must be able to pass a drug screen and physical exam Preferred Qualifications: Formal vocational training in plant maintenance activities with emphasis on industrial applications or equivalent job experience in electricity, power distribution, industrial electrical wiring, mechanics, machine operations, general plumbing, heating ventilation and air conditioning, and/or boiler operations Experience with electronic and PLC based applications in an industrial environment. Experience with pumps, welding, bearings, electrical safety, forklifts, gears, hydraulics, valves, and rigging Experience in a Lean Environment Annual or Hourly Compensation Range: The pay rate for this role is $32.00 per hour. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab provides the following benefits: medical, dental, vision, life insurance, accident insurance, critical illness insurance, hospital indemnity insurance, auto insurance, home insurance, pet insurance, identity theft protection, short-term and long-term disability, 401k, pension plans, retirement health care benefits, short-term incentives, vacation (12 days), holidays, parental leave, employee stock purchase plans (Full-Time Associates), discount on day care services and caregiver services, adoption assistance, group legal services, employee assistance program, employee discount program, and education assistance program, on-Site childcare and fitness facilities may be available at select Ecolab locations. Click here for additional benefits information. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here . Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: - Undergo additional background screens and/or drug/alcohol testing for customer credentialing. - Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website. Our Commitment to a Culture of Inclusion & Belonging At Ecolab, we believe the best teams are inclusive. We are on a journey to create a workplace where every associate can grow and achieve their best. We are committed to fair and equal treatment of associates and applicants and recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York City Fair Chance Act.

Job Description The Maintenance Electrician inspects, repairs, coordinates, installs, modifies and maintains electrical-systems and electrical and mechanical equipment to ensure continuous proper operation at the AAC facility during varying shift times, including nights, weekends and Holidays. This FULL TIME direct hire position is great for someone looking to move indoors and get away from the Texas heat or gain experience to work towards their masters electrician license. Comes with benefits such as medical, dental, vision, PTO, 401(k), etc. Essential Functions: Performs and documents preventive maintenance on all electrical systems, control systems, and vertical transportation control systems to ensure excellent working conditions and compliance to all applicable codes; Maintains all electrical circuitry and equipment in excellent working condition; including but not limited to stationary and moving equipment normally involved in the operation of a large multi-use facility; Assists other trade personnel in making various repairs in the arena; Performs operation of facility equipment and heavy machinery as required for facility operation; Provides emergency repairs to arena equipment during event operations to ensure the success of the event; Coordinates and supervises contractors and vendors performing electrical or electronic work in the facility; Utilizes CMSS system to include interpreting/prioritizing work orders, performing work requested and completing work orders per instruction; Programs and troubleshoots PLC based control systems; Maintains a working knowledge of Security (CCTV) and Fire systems; Maintains and performs working assignments on all voltage systems including 120/208, 277/480 and 5KV; Other duties as assigned. Education/Qualifications: College Degree in an electrical technology field preferred or High School Diploma/GED or graduated from a certified electrical apprenticeship program Bilingual English/Spanish is preferred 5 years minimum of commercial Journeyman experience Working knowledge of PLC is preferred Must have extensive knowledge of the NEC Must have advanced education in the maintenance repair and operation of electrical equipment, mechanical and production based equipment and control systems and typical public assembly of facility equipment Must possess a current State of Texas Journeyman Electrical License Knowledge of electrical safety Personifies our core values of INTEGRITY, TEAMWORK, PASSION, and EXCELLENCE at all times. Physical Demands/Work Environment Ability to reach with hands and arms use hands to handle, or feel, stand, climb or balance and stoop, kneel, crouch, or crawl, walk and sit; Ability to lift and/or move up to 50 pounds while twisting and/or turning working at heights, including Catwalk work, and frequent climbing of stairs and ladders Ability to work in small and confined spaces Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus Ability to work at heights and in extreme conditions Must be flexible in ability to work all hours/shifts in a 24/7 facility. Work hours are based on Events. Ability to respond during normal business hours, after hours and on weekends via cell phone is required/company phone allowance is provided. Employee selects service plan and is responsible for the repair and/or replacement of the phone Employees with this phone access requirement are not restricted in their movement, location, and activities during off hours when they are not at work The noise level in the work environment is usually moderate, however, during events, the noise level may be loud Position is required to work in exposed wet and/or humid conditions Position is required to work near moving mechanical parts, high, precarious places, fumes or airborne particles, toxic or caustic chemicals, outside weather conditions, extreme cold, extreme heat and risk of electrical shock Employees must be able to work on evenings, weekends and holidays as required.

Full-time Description We are ERock! Enchanted Rock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. Enchanted Rock's dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation's most dependable microgrids - all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by GraniteEcosystem™, our revolutionary software system, Enchanted Rock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The Enchanted Rock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you'll do… We are seeking a skilled Electrical Technician, Automation & Controls to support the integration, commissioning, and optimization of generator packages and electrical systems within advanced microgrid projects. This role is hands-on and dynamic, requiring expertise in automation, controls, and system performance to help ensure reliable, safe, and compliant operations. This is a field position based out of Dallas - Fort Worth, Texas and will report directly to the Manager of Automation & Controls Engineering. You'll make an impact by: System Integration & Commissioning Contributing to the integration of generator packages, switchgear, and electrical systems in line with project specifications, safety protocols, and timelines. Carrying out and validate cable schedules, control packages, and system testing protocols. Performing start-up and performance testing activities to confirm operational readiness and safety compliance. Project Execution & Handover Supporting the transition from construction to commissioning and operations teams by confirming integration requirements are met. Tracking and closing punch list items by documenting deficiencies and assisting with resolution. Providing troubleshooting support during early operational phases following system integration. Technical Contribution Assisting in troubleshooting automation, protection, and control systems (e.g., Schneider PLCs, DeepSea Controllers, ABB Relays, SEL devices). Participating in the development and delivery of training for site personnel and contractors on microgrid operations, controls, and start-up procedures. Helping maintain documentation control and reporting, ensuring accurate project records. Collaboration & Reporting Communicating progress and technical findings with project management and integration teams. Using tracking tools to update key milestones, risks, and solutions. Contributing to identifying risks and ensuring compliance with SHE standards, company protocols, and regulatory requirements. Safely preparing, operating, and maintaining a motor vehicle for purposes of conducting company business You'll sweep us off our feet if you: Have strong analytical and have problem-solving abilities in automation and control systems. Are collaborative and effective working style with team members and contractors. Are proactive, self-motivated, and eager to take ownership of tasks. Are flexibile and able to adapt to shifting project requirements and deadlines. Have hands-on background in technical fields related to power generation, electrical construction, and commissioning. Are committed to safety, reliability, and operational excellence Requirements What you'll need: 3+ years of experience in the energy sector (or equivalent electrical experience), with emphasis on power generation, automation, and controls. Associate's degree (desired) in electrical, automation, or related technical discipline. Knowledge of microgrid operations, system integration, and applicable codes/standards. Hands-on experience with control and protection equipment such as: Schneider PLCs, DeepSea 8660 & 8610 Controllers (or equivalent), or ABB 615 Relay, SEL 700G, SEL 700GT, SEL RTAC Experience working across multiple stages of project execution. Physical ability to work in field environments, including adverse weather conditions, lifting up to 50 pounds, and performing physically demanding tasks. Your Rewards! Medical, Dental, Vision, and Prescription Drug Insurance Company-Paid Life Insurance Flexible Spending Account (FSA) Health Savings Account (HSA) Wellness Programs and Incentives 401(k) Retirement Plan & Company Match Paid Time Off - Sick & Vacation Time Paid Holidays Do you have what it takes to join the Enchanted Rock team? Send us your resume today. Be yourself and keep it useful, funny, and cool! The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education - to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values, specifically our value of “The Team”, which includes “Mutual Respect, Openness, and Honesty.”

Full-time Description Install and perform preventative maintenance on electrical equipment, and participate in facilities and maintenance department activities and projects. Essential Duties and Responsibilities include the following, other duties may be assigned: Promote working in a safe manner including completing JSA's and developing safe work plans for hazardous situational work, establishing designated work zones with posted signage, communicating hazards adequately to nearby employees, utilizing proper PPE, initiating stop-work practices in unsafe situations, reporting incidents and injuries promptly, and confronting unsafe acts and situations related to contractor work. Responsible for planning, assembling, installation, maintenance and testing of electrical equipment and wiring systems in an industrial setting, including AC/DC voltages, single and 3-phase, and wireless equipment Calibrate, install, and maintain transmitters, transducers, and other sensing equipment Make recommendations for the improvement of the operation of existing electrical systems and designs/layouts for future electrical systems including researching, developing plans, and submitting purchasing requests Perform PM's, troubleshooting, repairs, adjustments, and installations to industrial electrical systems including electrical components of mechanical systems, for systems up to 600 VAC, and for control systems up to 50 VDC, motor and motor controls, HVAC, lighting, access controls, cameras, and other equipment. This will require weekly and monthly inspections of equipment and good record keeping ability Assist in on-the-job training of apprentice electricians, technicians, and uphold RECARO expectations of contractors Adhere to the RECARO Lock out/Tag out program, work with Arc Flash equipment, and other OSHA requirements and standards Participate in ariel work, overhead lifting activities, loading and unloading of equipment, and other setup and relocation of heavy equipment or objects Light plumbing, fabricating, painting, housekeeping, groundskeeping, facilities inspection overhead doors repairs, events setup and teardown, inclement weather preparations, assisting other tradesman and emergency repairs Promoted good housekeeping including adherence to Bloodborne Pathogens standards and maintain an organized work area Coordinate with external vendors Maintain compliance with Federal and State Environmental regulations and agencies within RECARO guidelines Operate forklift, scissor/boom man lifts, company vehicles and other necessary equipment to perform job duties Able to work periodic weekends and evenings to accomplish certain tasks in non-production hours to minimize the impact to production Motivated self-starter who can manage tasks and projects and make decisions, and is also willing to be apart of a high performing team Requirements Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: Possess Journeyman Electrical license At least 5 years Journeyman Electrician experience, Industrial Electrical experience preferred Must be able to use multi-meters, meggar, amp probe, thermal imaging devices and other instruments used in troubleshooting electrical equipment Basic knowledge of National Electrical Code High school diploma or equivalent At least 5 years experience in some type of maintenance support in manufacturing environment Ability to remain flexible in a dynamic business environment Ability to read/comprehend electrical schematics and technical information Work effectively as a team member Prioritize and complete multiple tasks and responsibilities Certificates and Licenses: Journeyman Electrical License Valid Drivers License

: Oversee the broad array of facility-related maintenance, including HVAC, refrigeration, plumbing, carpentry, painting and landscape. This individual will be responsible for the execution, planning, project controls, budget, risk and business management, new capital construction, facilities and preventative maintenance, and rehab projects. Job Duties: Oversee the broad array of facility-related maintenance, including HVAC, refrigeration, plumbing, electrical, carpentry, painting, masonry, roadways, and wooden and fiberglass attraction structures. Strategic planning and execution of new construction, architectural and design activities Protect company assets and apply risk management experience to ensure Guest and Team Member safety. Conduct rounds of all filtration areas to inspect pumps, motors, generators, chillers, and boilers. Maintain, repair, inspect, and troubleshoot waterpark attractions to ensure their safe and efficient operation with minimum supervision. Oversee the work order process through MAXIMO. Prioritize work order requests and distribute to appropriate Team Members. Schedule work orders, place vendor bids for materials, select vendors and prepare requisitions. Estimate job costs for input into budget database. Maintain records and produce use of force reviews of security-related incidents. Manage Emergency Response procedures and training for Park personnel. Evaluate performance data to refine business and operational practices, ensure safe and efficient operations, effective work force utilization, and effective budget controls. Keep all records and documentation updated daily, accessible and organized Provide leadership, coaching and development for the entire Maintenance Team Establish and maintain relationships within the various Maintenance department to sustain a productive and satisfying work environment Responsible for the management of Maintenance, Construction, Electrical, capital, and labor budgets. Ensure compliance and documentation of specifications set by ride manufacturers and the State of Texas. Attend Union meetings and coordinate Union Collective Bargaining Agreement negotiations Develop a diverse work force and management team focused on safe methods Serve as Park Guest Service Ambassador and work to resolve all concerns brought to your attention. Monitor department Team Member Voice survey scores and assist in the development of initiatives to address areas of needed improvement. Perform all other duties as required. Skills and Qualifications: At least 5 years' experience in maintenance disciplines such as mechanics, carpentry, plumbing, and/or electrical. Knowledge in Ride Controls, PLC, RS, Connected Components and other Ride Control related items. Availability to work varied shifts including weekends, evenings, and holidays required. Duties and tasks may involve standing, walking, bending, and lifting up to 75lbs. Position is regularly exposed to wet and/or humid conditions and outside weather conditions. Ability to sit, stand, walk, duck, crawl, climb stairs and ladders, and work at heights with fall protection. Proficiency in Microsoft Office applications specifically Word, Outlook, Excel, and PowerPoint. Must possess a valid driver's license and be able to operate vehicles (including but not limited to forklifts, golf carts, cars, trucks). Must be able to work with chemicals and follow MSDS

Please read the following job description thoroughly to ensure you are the right fit for this role before applying. To complete inspections and repair of electrical equipment including rides and other park facilities. Responsibilities: Specific Duties and Responsibilities: * Repair electrical and electronic equipment * Analyze equipment malfunctions to determine cause and corrective action * Access all areas of ride structures for inspections and maintenance * Install adequate temporary and/or permanent power for events and festivals throughout the season * Assist with various electrical needs for new construction and remodeling projects as assigned * Climb stairs or ladders to heights over 50ft while carrying tools and equipment and be able to use them * Maintain positive interaction with other employees and guests * Other tasks and duties as assigned Qualifications: * State Journeyman's license preferred * Theme park ride experience a plus * Must be experienced in maintaining and troubleshooting equipment using PLC, and relays * Experience in installation, repair, and maintenance of electrical equipment * Able to stand and walk for long periods xevrcyc of time outdoors in extreme heat/cold and sun * Able to carry tools and lift at least 50lbs * Must be comfortable working at heights over 50ft * Must be able to work a rotating schedule including nights, weekends, holidays, and extended shifts as needed * Must possess a valid Driver's License with a good driving record * Must be at least 18 years of age

American Airlines Center is one of the nation's top arenas. Since openings its doors in 2001, American Airlines Center has been setting the precedent for sporting and live entertainment events. Bringing in a variety of big name shows and housing both the Dallas Mavericks and the Dallas Stars. American Airlines Center serves more than 2 million guests during 200+ live events each year. We aim to provide genuine, memorable and innovative experiences to every single one of our guests and demand excellence and creativity in everything we do. The Maintenance Electrician inspects, repairs, coordinates, installs, modifies and maintains electrical-systems and electrical and mechanical equipment to ensure continuous proper operation at the AAC facility during varying shift times, including nights, weekends and Holidays. This FULL TIME direct hire position is great for someone looking to move indoors and get away from the Texas heat or gain experience to work towards their masters electrician license. Comes with benefits such as medical, dental, vision, PTO, 401(k), etc. Essential Functions: * Performs and documents preventive maintenance on all electrical systems, control systems, and vertical transportation control systems to ensure excellent working conditions and compliance to all applicable codes; * Maintains all electrical circuitry and equipment in excellent working condition; including but not limited to stationary and moving equipment normally involved in the operation of a large multi-use facility; * Assists other trade personnel in making various repairs in the arena; * Performs operation of facility equipment and heavy machinery as required for facility operation; * Provides emergency repairs to arena equipment during event operations to ensure the success of the event; * Coordinates and supervises contractors and vendors performing electrical or electronic work in the facility; * Utilizes CMSS system to include interpreting/prioritizing work orders, performing work requested and completing work orders per instruction; * Programs and troubleshoots PLC based control systems; * Maintains a working knowledge of Security (CCTV) and Fire systems; * Maintains and performs working assignments on all voltage systems including 120/208, 277/480 and 5KV; * Other duties as assigned. Education/Qualifications: * College Degree in an electrical technology field preferred or High School Diploma/GED or graduated from a certified electrical apprenticeship program * Bilingual English/Spanish is preferred * 5 years minimum of commercial Journeyman experience * Working knowledge of PLC is preferred * Must have extensive knowledge of the NEC * Must have advanced education in the maintenance repair and operation of electrical equipment, mechanical and production based equipment and control systems and typical public assembly of facility equipment * Must possess a current State of Texas Journeyman Electrical License * Knowledge of electrical safety Personifies our core values of INTEGRITY, TEAMWORK, PASSION, and EXCELLENCE at all times. Physical Demands/Work Environment * Ability to reach with hands and arms use hands to handle, or feel, stand, climb or balance and stoop, kneel, crouch, or crawl, walk and sit; * Ability to lift and/or move up to 50 pounds while twisting and/or turning working at heights, including Catwalk work, and frequent climbing of stairs and ladders * Ability to work in small and confined spaces * Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus * Ability to work at heights and in extreme conditions * Must be flexible in ability to work all hours/shifts in a 24/7 facility. Work hours are based on Events. * Ability to respond during normal business hours, after hours and on weekends via cell phone is required/company phone allowance is provided. Employee selects service plan and is responsible for the repair and/or replacement of the phone * Employees with this phone access requirement are not restricted in their movement, location, and activities during off hours when they are not at work * The noise level in the work environment is usually moderate, however, during events, the noise level may be loud * Position is required to work in exposed wet and/or humid conditions * Position is required to work near moving mechanical parts, high, precarious places, fumes or airborne particles, toxic or caustic chemicals, outside weather conditions, extreme cold, extreme heat and risk of electrical shock * Employees must be able to work on evenings, weekends and holidays as required. AMERICANS WITH DISABILITIES ACT - JOB ACCOMMODATION REQUESTS Any individual who requests a job accommodation due to a physical or mental impairment will require a dialogue with Human Resources to determine if the individual can perform the essential duties of the job, with or without a reasonable accommodation. Medical documentation will be required to support any request for medical restrictions that impact job duties. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Details Encore Wire McKinney - McKinney, TX Full Time Full TimeDescription An Electrical Control Technician at Encore Wire will be primarily responsible for the safe rectification of machinery and equipment used in the various production plants and throughout the facility as directed by Supervision or Company dictated equipment priority. The Control Technician must be able to work on all facility wide electrical systems. A good understanding and experience of all mechanical and electrical disciplines is needed, these would include hydraulics and pneumatics. Essential Job Functions Experience and technical knowledge of the operation of AC and DC drives. A thorough understanding of speed feedback devices theory and operation. An understanding of temperature control and temperature components. A good understanding of PID and control loops. A good understanding of Ethernet communications and connections. Proficient in PLC and HMI systems, to include communications drivers and connections, PLC program navigation and controlled manipulation. A thorough understanding of all electrical components and electronic devices. Show an understanding and demonstrate the processes involved in diagnosing defective components, motors, drives and electronic components. Able to demonstrate the ability to use diagnostic equipment. Experience with selecting electrical components when original OEM components are not available. NOTE: This job description does not contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. Qualifications Other Skills/Abilities The candidate must be a Team player and be willing to share his knowledge freely. The candidate will be required to work with all team members undertaking any and all roles from leading a task to cleaning up after a task. A successful team member will have extremely good work ethic and a great punctuality and attendance record. Physical Requirements Requires repetitive movement Requires walking Requires kneeling, crouching and stooping Requires using hands to handle, control, or feel objects, tools or controls Requires lifting up to 50 pounds while bending, twisting and/or standing

Job DescriptionDescription: Install and perform preventative maintenance on electrical equipment, and participate in facilities and maintenance department activities and projects. Essential Duties and Responsibilities include the following, other duties may be assigned: Promote working in a safe manner including completing JSA's and developing safe work plans for hazardous situational work, establishing designated work zones with posted signage, communicating hazards adequately to nearby employees, utilizing proper PPE, initiating stop-work practices in unsafe situations, reporting incidents and injuries promptly, and confronting unsafe acts and situations related to contractor work. Responsible for planning, assembling, installation, maintenance and testing of electrical equipment and wiring systems in an industrial setting, including AC/DC voltages, single and 3-phase, and wireless equipment Calibrate, install, and maintain transmitters, transducers, and other sensing equipment Make recommendations for the improvement of the operation of existing electrical systems and designs/layouts for future electrical systems including researching, developing plans, and submitting purchasing requests Perform PM's, troubleshooting, repairs, adjustments, and installations to industrial electrical systems including electrical components of mechanical systems, for systems up to 600 VAC, and for control systems up to 50 VDC, motor and motor controls, HVAC, lighting, access controls, cameras, and other equipment. This will require weekly and monthly inspections of equipment and good record keeping ability Assist in on-the-job training of apprentice electricians, technicians, and uphold RECARO expectations of contractors Adhere to the RECARO Lock out/Tag out program, work with Arc Flash equipment, and other OSHA requirements and standards Participate in ariel work, overhead lifting activities, loading and unloading of equipment, and other setup and relocation of heavy equipment or objects Light plumbing, fabricating, painting, housekeeping, groundskeeping, facilities inspection overhead doors repairs, events setup and teardown, inclement weather preparations, assisting other tradesman and emergency repairs Promoted good housekeeping including adherence to Bloodborne Pathogens standards and maintain an organized work area Coordinate with external vendors Maintain compliance with Federal and State Environmental regulations and agencies within RECARO guidelines Operate forklift, scissor/boom man lifts, company vehicles and other necessary equipment to perform job duties Able to work periodic weekends and evenings to accomplish certain tasks in non-production hours to minimize the impact to production Motivated self-starter who can manage tasks and projects and make decisions, and is also willing to be apart of a high performing team Requirements: Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: Possess Journeyman Electrical license At least 5 years Journeyman Electrician experience, Industrial Electrical experience preferred Must be able to use multi-meters, meggar, amp probe, thermal imaging devices and other instruments used in troubleshooting electrical equipment Basic knowledge of National Electrical Code High school diploma or equivalent At least 5 years experience in some type of maintenance support in manufacturing environment Ability to remain flexible in a dynamic business environment Ability to read/comprehend electrical schematics and technical information Work effectively as a team member Prioritize and complete multiple tasks and responsibilities Certificates and Licenses: Journeyman Electrical License Valid Drivers License

Please read the following job description thoroughly to ensure you are the right fit for this role before applying. To complete inspections and repair of electrical equipment including rides and other park facilities. Responsibilities: Specific Duties and Responsibilities: * Repair electrical and electronic equipment * Analyze equipment malfunctions to determine cause and corrective action * Access all areas of ride structures for inspections and maintenance * Install adequate temporary and/or permanent power for events and festivals throughout the season * Assist with various electrical needs for new construction and remodeling projects as assigned * Climb stairs or ladders to heights over 50ft while carrying tools and equipment and be able to use them * Maintain positive interaction with other employees and guests * Other tasks and duties as assigned Qualifications: * State Journeyman's license preferred * Theme park ride experience a plus * Must be experienced in maintaining and troubleshooting equipment using PLC, and relays * Experience in installation, repair, and maintenance of electrical equipment * Able to stand and walk for long periods xevrcyc of time outdoors in extreme heat/cold and sun * Able to carry tools and lift at least 50lbs * Must be comfortable working at heights over 50ft * Must be able to work a rotating schedule including nights, weekends, holidays, and extended shifts as needed * Must possess a valid Driver's License with a good driving record * Must be at least 18 years of age

Specific Duties and Responsibilities: Have you got what it takes to succeed The following information should be read carefully by all candidates. * Repair electrical and electronic equipment * Analyze equipment malfunctions to determine cause and corrective action * Access all areas of ride structures for inspections and maintenance * Install adequate temporary and/or permanent power for events and festivals throughout the season * Assist with various electrical needs for new construction and remodeling projects as assigned * Climb stairs or ladders to heights over 50ft while carrying tools and equipment and be able to use them * Maintain positive interaction with other employees and guests * Other tasks and duties as assigned Reporting Structure: Reports to the designated Electrical Foreman Skills and Qualifications: * State Journeyman's license preferred * Theme park ride experience a plus * Must be experienced in maintaining and troubleshooting equipment using PLC, and relays * Experience in installation, repair, and maintenance of electrical equipment * Able to stand and walk for long periods of time outdoors xevrcyc in extreme heat/cold and sun * Able to carry tools and lift at least 50lbs * Must be comfortable working at heights over 50ft * Must be able to work a rotating schedule including nights, weekends, holidays, and extended shifts as needed * Must possess a valid Driver's License with a good driving record * Must be at least 18 years of age