Maintenance electrician jobs in North Dakota - 303 jobs

Responsible for maintaining Basin Electric Power Cooperative's (BEPC) 115 kV, 230 kV and 345 kV transmission system, working on wood poles, steel poles, and lattice towers up to 500 kV construction. This position safely and efficiently maintains BEPC electric power transmission lines that serve our members, participants, and customers. The incumbent maintains rights-of-way and other Cooperative assets and assist other crafts as necessary. **ESSENTIAL DUTIES** + Assist in the maintenance of transmission facilities, including both wood and steel structures using live line maintenance with Bare hand / Hot Stick procedures. This includes climbing steel and wood structures, conducting aerial and ground patrol of assigned transmission lines, tightening hardware, checking insulator strings, and replacing fatigued or broken hardware. + Install and maintain conductors under both energized and de-energized conditions. Read blueprints and diagrams in order to assemble and erect wood and steel structures. + Patrol rights-of-way and maintain these areas by fixing fences and gates and restoring washed out areas. + Maintain shop locations to ensure a clean, safe working environment and perform minor maintenance on vehicle equipment. + Perform "groundwork" to assist other linemen in the maintenance of lines and structures. + Perform other duties as assigned. **MINIMUM QUALIFICATIONS** + A High school diploma or equivalent (GED or HSED) and either 4 years of experience with an accredited lineman apprenticeship program and obtained a Journeyman Lineman rating or 4 years of related military training/experience. + May be required to have a National Commission for the Certification of Crane Operator (NCCO) designation, or willingness to obtain certification within 1 year from date of hire. + A valid driver's license in the state of residence. + Must have a Class A Commercial Driver's License (CDL) with air brakes and no CDL restrictions other than a medical variance (V). If the incumbent does not have a CDL, after six months in the position, the incumbent will be required to complete CDL theory, obtain a permit, complete Behind the Wheel, and obtain a passing grade on the CDL test by the end of the first year of employment. This is a Department of Transportation (DOT) (FMCSA) (CDL) qualified position. **This position is identified as a Critical Infrastructure Protection (CIP) related position, which may allow physical and/or logical access to Bulk Electric System (BES) cyber related assets or systems. This position may allow access to privileged information relating to such assets or systems. This position will be required to strictly adhere to all Basin Electric policies, procedures, and programs applicable to the Critical Infrastructure Protection (CIP) requirements.** **PHYSICAL AND ENVIRONMENTAL DEMANDS** This position requires frequent sitting, standing, walking, and climbing structures and ladders, including lattice steel towers and wood or steel poles to heights up to 300 feet while the lines are energized; occasional bending, climbing stairs, kneeling, reaching, crawling, use of a keyboard/computer, use of foot controls, turning valves, pushing/pulling up to 150 pounds, and lifting up to 50 pounds. Equipment used includes insulated aerial man lifts, digger trucks, all-terrain vehicles, straight trucks over 26,001 pounds, tractor/trailer combinations (semi), line tension equipment, hot line tools/ bare hand equipment, hydraulic tamps, drills, air operated tools, chain saws, and other associated equipment used in the construction and maintenance of transmission lines. Finger dexterity, good color vision and hearing, and the ability to perform close work are required. Continuously working in areas of electrical risks (energized transmission line from 34,000 to 500,000 volts); frequently working in conditions of extreme heat or cold and dirt/dust; and occasionally around fumes, chemicals, vibration, and noise. The incumbent will also be required to work at heights up to 300 feet, which requires the use of safety equipment, including a harness, in accordance with ANSI Z359 standards. Harness rating usually 300lbs, including tools, clothing, and the individual. This position is also responsible to conduct aerial line patrol. The incumbent must remain fit for duty. **KEY SKILLS** + Daily, this position requires the ability to weigh/measure, read, write, and perform basic arithmetic. + Ability to routinely climb power line structures, including lattice steel towers and wood or steel poles, to heights of 225 feet and occasionally, to more than 300 feet while the lines are energized. + Ability to perform all classes of transmission line construction, maintenance, and operation work, with emphasis on safety, skill, and efficiency. + Distinct understanding of electricity, including erecting, assembling, and splicing conductors, cables, and ropes, and an understanding tension string of conductors. + May require working under pressure. **Wage: $57.07/hour** Basin Electric wants all interested and qualified candidates to apply for employment opportunities. If you are an applicant with a disability who is unable to use our online tools to search and apply for jobs, or who needs other assistance or accommodations, please contact us at ************. Please indicate the specifics of the assistance needed or provide your contact information, and a Basin Electric Human Resources representative will contact you. Basin Electric is an Equal Employment Opportunity Employer regarding race, color, religion, sex, sexual orientation, gender identity, national origin, disability, and veterans status.

Grotberg Electric is a growing 75 year old business with an average employment of over 10 years. We are looking for motivated individuals to join our company. We are currently seeking a Maintenance Electrician in Gwinner, ND. Work hours are 3pm-11pm. Pay - $20 - $37 per hour. We offer: 40-hour weeks with overtime available. Health Insurance Dental Insurance Vision Insurance Life Insurance Aflac 3 Weeks Paid Vacation 6 Paid Holidays Clothing Allowance Quarterly Profit Sharing Cell Phone Allowance Paid Training/ OSHA Classes, First Aid/ CPR 401K Position requires: Strong work ethic, strong organization, and people skills. Must own personal hand tools. Must be able to pass a pre-employment drug screen and background check as well as random drug screenings. Knowledge of NEC and Local Electrical Code. Knowledge of Industrial wiring methods.

I&E Journeyman Electrician (Arnegard, ND) Pay: $45-$55 per hour DOE Relocation Available Expiration Date of Job Posting: Continuous The Journeyman Electrician needs to enjoy teamwork and be reliable, hard-working, is able to lead, and be adaptable to different working environments, including extreme weather environments. Main responsibilities include the safe and careful installation of company products at client sites, adhering to guidelines set forth in the NEC Codebook, blueprints, and the spec book for a project, training and educating apprentices in the use and understanding of the NEC codebook as well as practical application on the job. Previous experience in the oil and gas industry is a plus, as well as, general mechanical aptitude and a familiarity with working with tools. JOB QUALIFICATIONS: Active Journeyman Electrician's license required. High school graduate or GED equivalent from an accredited institution. Understands the basics of AC/DC electrical fundamentals. Experience with PLC/RTU Instrumentation and Controls and program ladder logic preferred. Experience in the installation of lighting control systems is preferred. Previous experience in the oil and gas industry is preferred. General mechanical aptitude and familiarity with working with hand tools. Technical college degree or technical experience preferred. Demonstrated computer skills, especially with Microsoft Office. Able to speak, write, and read the English language. Valid driver's license with a good MVR. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: Responsible for callout on emergency communications outages or problems. Terminate both high and low voltage equipment and cable/wiring. Read blueprints to determine the scope of work and order the correct materials. Assemble and install electrical equipment (i.e. switch gear conduit cable tray explosion proof equipment). Train and educate apprentice level employees in use and practical application of NEC code Is familiar with NFPA 70E guidelines and must be able to practically apply guidelines in the field. Communicate with the customer and (or) General Contractor in the field. May require occasional travel by air or vehicle to out of state locations when requested by Company. OTHER JOB FUNCTIONS: Comply with all safety work procedures in a fast-paced, changing environment. Prepare, install, and service all company products at client sites, which may include equipment calibrations, troubleshooting, radio installations, instrument and controls programming, performing low-voltage electrical wiring, and performing tank and H2O measurement. Keep accurate records of hours logged, inventory parts used, and services performed. Maintain strong customer service and relations. WORK CONDITIONS: Able to function in an oil field environment safely and effectively. Able to sit and work at computer keyboard for extended period. Able to perform general office administrative activities of copying, filing, faxing, and using the telephone. Must be able and willing to work in adverse weather (i.e. cold temperatures and high heat) Must be able to work from elevated platforms. Must be able to operate heavy equipment (i.e. scissor lifts, aerial lifts, backhoe etc.). Must be able to bend and cut conduit using hand saws, hand tube bending equipment as well as power and hydraulic cutting and tube bending devices. Must be able to push, pull, or lift up to 60 lbs. Winn-Marion offers eligible employees a generous benefits package, including the following: Paid Time Off (vacation days, rest days, sick days, holidays, birthday, and a floating holiday all amounting to a minimum of 27 days annually) Medical, Dental, Vision and Life Insurance FSA and HSA Options Discounts offered via Perks at Work 401(k) + matching Profit sharing Employee Assistance Program Eligibility for benefits depends on the type of positions and whether the position is full-time, part-time, or temporary. Any offer of employment is contingent upon passing pre-employment requirements, including drug screen and criminal background check. Equal Opportunity Winn-Marion does not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics.

The Electrical Journeyman is a skilled professional responsible for the installation, maintenance, and repair of electrical systems in commercial, industrial, and residential settings. This role requires a thorough understanding of electrical codes, safety regulations, and the ability to work independently or as part of a team. The Electrical Journeyman will interpret blueprints, troubleshoot electrical issues, and ensure all work is completed to the highest standards of quality and safety. Key Responsibilities: Installation: Install, maintain, and repair electrical wiring, equipment, and fixtures. Ensure that all installations are in accordance with the National Electrical Code (NEC) and local electrical codes. Measure, cut, bend, thread, and install conduit and electrical conductors. Connect wires to circuit breakers, transformers, or other components. Troubleshooting & Repair: Diagnose and repair malfunctioning electrical systems, apparatus, and components, using test equipment and hand tools. Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure code compliance. Maintenance: Perform routine maintenance on electrical systems to prevent breakdowns and ensure optimal performance. Inspect and test electrical systems to ensure proper functioning. Safety & Compliance: Adhere strictly to all company safety policies, OSHA regulations, and industry best practices. Ensure proper use of Personal Protective Equipment (PPE) at all times. Identify and report potential electrical hazards. Blueprint Interpretation: Read and interpret blueprints, schematics, and wiring diagrams to determine the layouts of electrical systems. Teamwork & Supervision: Work effectively with other journeymen, apprentices, and various trades. Provide guidance and training to apprentices and junior electricians, ensuring their adherence to safety and quality standards. Material Management: Estimate material requirements and order necessary supplies. Manage and organize tools and equipment on job sites. Documentation: Complete all necessary paperwork, including work orders, inspection reports, and time sheets, accurately and in a timely manner. Qualifications: Education & Certification: High school diploma or equivalent. Valid Journeyman Electrician license in GA. OSHA 10 or 30 certification preferred. Experience: Minimum of 2years of experience as a licensed Journeyman Electrician. Proven experience in commercial, industrial, or residential electrical work (specify relevant experience). Skills: Thorough knowledge of the National Electrical Code (NEC) and local electrical codes. Proficient in reading and interpreting blueprints, schematics, and technical diagrams. Strong troubleshooting and diagnostic skills for electrical systems. Ability to use a variety of electrical tools and testing equipment safely and effectively. Excellent problem-solving and critical-thinking abilities. Strong communication and interpersonal skills. Ability to work independently and as part of a team. Valid driver's license and acceptable driving record. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to lift, carry, push, and pull up to 50 pounds regularly. Ability to stand, walk, climb ladders, bend, stoop, kneel, and crouch for extended periods. Manual dexterity to handle and work with small components. Good vision, including color vision, and hearing. Ability to work in various weather conditions and environments (e.g., confined spaces, heights, noisy areas). Work Environment: Work is performed both indoors and outdoors, at various job sites, which may include construction sites, industrial facilities, and commercial buildings. The environment may involve exposure to loud noise, dust, chemicals, and varying temperatures. Safety precautions and personal protective equipment are mandatory. Pay Benefits Medical employer paid for employee PTO 401K Dental Vision Life Insurance Aflac

Job Description Local Electrical company is currently seeking a Full Time Service Electrician. Employer offers great benefits including health insurance, long & short term disability, retirement, paid holidays and paid vacation. Compensation is based on education and experience. Responsibilities: Install and repair electrical equipment and fixtures Troubleshoot motor and control systems Perform routine maintenance on electrical wiring and systems Qualifications: Previous experience as a Journeymen Electrician is required Must have a valid drivers license Familiarity with electrical schematics, blueprints, and manuals Familiarity with electrical equipment and hand tools Strong problem solving and critical thinking skills Ability to communicate with Homeowners & Project Managers #hc108212

Join Our Team: Transmission Power Linemen Wanted Mountainside Power is currently seeking experienced Transmission Power Linemen to join our expanding team. We are looking for reliable professionals who take pride in their craftsmanship, demonstrate sound judgment under pressure, and are committed to delivering high-quality work on every project. Position Requirements: Demonstrated experience in transmission power line construction and maintenance Proficiency in the safe and effective operation of heavy equipment Strong knowledge of OSHA regulations and adherence to job site safety protocols Physically capable of climbing, lifting, and working at elevated heights Team-oriented mindset with a positive attitude Ability to work independently and lead by example when necessary Valid CDL preferred Must successfully pass a pre-employment drug screening and background check Willingness to work 30-80 hours per week, including weekends and travel as required What We Offer: Competitive compensation Daily per diem for travel assignments Comprehensive health, dental, and vision insurance 401(k) retirement plan with company match Clear pathways for career advancement and professional development Immediate start dates available If you're a dependable professional who takes pride in delivering exceptional results, we encourage you to apply today and become part of a company that truly values your expertise and commitment. ?? Now Hiring - Immediate Openings Available

Job Description Lead Maintenance Technician - Conveyor Systems - needed in North Dakota - Up to $40 an hour Direct Hire, Union Benefits (no out of pocket medical costs), Overtime, Start ASAP. A global leader in conveyor technologies with several facilities in North Dakota is currently seeking several Lead Conveyor Service Technicians for long-term Direct-Hire opportunities with their growing team. These are excellent opportunities for Lead Conveyor Technicians who are looking for a company that offers great benefits, stable employment, Union Benefits, and growth opportunities. Lead Conveyor Service Technicians rates are anticipated to start between $36 to $40 per hour based on each candidates experience and education. We will pay more for the right skills and experience. All well qualified candidates will be considered regardless of pay rate. Overtime is paid at premium rates over 40 hours. We offer excellent benefits including great Medical, Dental, Paid Holidays, Generous PTO, 401k with matching, and more! Qualified Lead Conveyor Service Technicians will have most, if not all, of the following skills and experience: Experience with conveyor systems, roller and belt conveyors, diagnosing, repairing and replacing gears, belts, bearings, chains, rollers, hydraulics, and pneumatics. Must be able to align and adjust mechanical components to reduce friction, wear, and operational failures. Good basic electrical skills including using multimeters, diagnostic software, and interpreting PLC faults / alarms. Must be hands-on, open to travelling to projects and handle clients directly. Experience with scheduled / predictive maintenance and repairs is essential and on-call for emergency breakdowns. Must have experience replacing sensors, motors, VFD's, as well as basic troubleshooting of HMI's and controls circuits. Must have confidence reading electrical, pneumatic, and mechanical blueprints / manuals. Must be able to travel 50% overnight-travel, will be primarily within the state of North Dakota, and often within 2 hours of your home location. Must be able to work in the United States (no H-1 sponsorship or student visas considered). Must be able to pass standard pre-hire checks including background, drug screen, etc.

Meet the team that brings our projects to life. From logistics to electrical work, everyone in the field plays a critical role in building, powering, and delivering success on a jobsite. Our logistics professionals keep construction moving by ensuring a steady flow of inventory. They bring attention to detail and strong organizational skills as they procure tools and materials for our electricians. Apprentice electricians are the powerhouses behind our most dynamic projects, while summer interns and new graduates kick off their careers as industrial electrical professionals. These team members work closely with our journeyman electricians-seasoned experts who lead and mentor crews while completing complex projects. Our journeyman electricians partner with field foremen and site superintendents, who coordinate work, manage risks, and keep projects on track through planning, motivation, and communication. Our I&E, service, and maintenance teams ensure project performance by installing, testing, troubleshooting, and calibrating equipment. Across roles, we all champion safety-empowering employees to lead as safety shareholders, uphold zero-injury expectations, and care for our crews, company, and families. Journeyman Responsibilities * Measuring, cutting, bending, threading, assembling, and installing conduit * Overseeing, or participating in, wire installations with conduit & cable tray * Connecting power to equipment * The ability to lead/develop up to 4 apprentice electricians * Knowledge of other construction trades * Ability to stand, walk ,and lift up to 100 lbs in construction work environment * Ability to climb, and maintain balance, on ladders and scaffolds while carrying tools * May be exposed to high and precarious places * Risk of electrical shock and outside weather conditions * Personal Protective Equipment (PPE) required * Other duties may be assigned Qualifications Education & Experience: We are looking for electricians with experience using, or the desire to learn, the latest BIM/VDC technologies for pre-planning and on-site coordination of all Interstates projects. * Must have state issued journeyman electrician license (or equivalent) * Industrial electrical experience required. * Knowledge of BIM/VDC Technology preferred. Location/Travel: This position will require travel in/around Fargo, ND - up to/within a 200-mile radius. Applicants must be permanently located in/around the office location or be willing to permanently relocate. Applicants must have reliable transportation and a valid driver's license. Per diem and mileage stipends applicable per company policy. Work Schedule: Start times, break times and work hours vary per site and stage of our projects. Our employees work more than 40 hours per week but no more than 60, as part of our commitment to safety. Due to the type of construction, weekend work maybe required on occasion. Work Environment: While performing the duties of this job, this role is often exposed to high/precarious places, risk of electrical shock, and all outside weather conditions. This role is expected to climb and work at heights and in confined spaces. The noise level in the work environment is usually moderate. Due to the nature of our work and our client base, this role may involve tasks in an environment exposed to dust. Candidates should be comfortable working in these conditions and complying with safety standards to protect their well-being. Benefits of Working at Interstates: * 401(k) Retirement Plan + Company Match * Health, Dental, and Vision Insurance Benefits (Short & Long-Term Disability, Group Life Insurance, and more) * Company Discount Perk Program (Access to discounts with renown brands across the country) * Paid Time Off & Holiday Pay, Flexible Schedule (Support work/life balance) * Bonus Incentives (End of Fiscal Year Incentives and Merit Increases) * Per Diem/Travel Pay or FAVR Program Benefits (as applicable) * Family & safety culture - a team that cares about you as a whole person, not just what you do at work * Company Sponsored Holiday Events, Team Celebrations, and Community Outreach Volunteer Time * Advancement Opportunities unique to our employee's long-term goals * Company Issued Cordless Milwaukee Tool Kit * Continuing Education & Journeyman Licensing Renewal Assistance * Double Pay for Sunday Work, Triple Pay if working an occasional holiday

Join our talent pipeline and be the first to be notified when we have new projects! We are seeking a skilled and safety-conscious Lineman for a Substation role to join our team. This position involves installing, maintaining, and repairing electrical equipment and systems within substations. The successful candidate will work closely with other linemen, engineers, and technicians to ensure the safe and reliable operation of power transmission and distribution systems. Installation & Maintenance: Install, maintain, and repair electrical lines and equipment such as transformers, circuit breakers, switches, and substations. Inspection: Inspect and test substations and electrical equipment to ensure operational safety and functionality. Troubleshooting: Diagnose faults in electrical systems and perform necessary repairs or replacements. Safety & Compliance: Follow all safety guidelines, protocols, and regulatory requirements (OSHA, NESC) while working in substations and on power lines. Emergency Response: Respond to emergency calls, outages, and other critical issues promptly and efficiently. Collaboration: Work alongside other linemen, electricians, engineers, and operations teams to ensure a continuous flow of power. Record Keeping: Maintain accurate records of work performed, equipment installed, and any system maintenance or repairs. Equipment Use: Operate specialized tools and equipment such as aerial lifts, cranes, power drills, and testing devices. Training: Continuously improve skills through training programs, certifications, and on-the-job learning. Requirements Position Qualifications Required: Previous experience in electrical line work or similar field. Ability to work outdoors in various weather conditions and at elevated heights. Strong understanding of electrical safety protocols and regulations. Ability to work varied shifts, including nights and weekends as required. Willingness to travel Previous experience in a substation environment. Preferred: Completion of an accredited training program or apprenticeship in electrical line work. Knowledge of electrical systems and troubleshooting techniques. High school diploma/GED; additional preference given for degree from Vocational, Technical, or Community Colleges or Apprenticeship programs. Key Responsibilities: Installation & Maintenance: Install, maintain, and repair electrical lines and equipment such as transformers, circuit breakers, switches, and substations. Inspection: Inspect and test substations and electrical equipment to ensure operational safety and functionality. Troubleshooting: Diagnose faults in electrical systems and perform necessary repairs or replacements. Safety & Compliance: Follow all safety guidelines, protocols, and regulatory requirements (OSHA, NESC) while working in substations and on power lines. Emergency Response: Respond to emergency calls, outages, and other critical issues promptly and efficiently. Collaboration: Work alongside other linemen, electricians, engineers, and operations teams to ensure a continuous flow of power. Record Keeping: Maintain accurate records of work performed, equipment installed, and any system maintenance or repairs. Equipment Use: Operate specialized tools and equipment such as aerial lifts, cranes, power drills, and testing devices. Training: Continuously improve skills through training programs, certifications, and on-the-job learning. Working Conditions: Hours: Must be available for shifts, weekends, holidays, and on-call work as required. Environment: Outdoor work in all weather conditions; climbing utility poles, working with heavy electrical equipment, and at high altitudes. Travel: Some travel may be required for installations, repairs, or emergency response.

Electrician (Journeyman) We are seeking a skilled and reliable Journeyman Electrician to join our dynamic team. This is an excellent opportunity for experienced electricians who are committed to delivering high-quality work and ensuring safety standards are met. If you have a strong work ethic and a passion for electrical systems, we invite you to apply and grow with us. Key Responsibilities: - Install, maintain, and repair electrical systems in agricultural, commercial, and industrial settings - Read and interpret electrical blueprints, technical diagrams, and schematics - Ensure all work complies with local electrical codes and safety regulations - Troubleshoot electrical issues and perform necessary diagnostics - Collaborate with project managers, contractors, and clients to complete projects on time and within budget - Maintain accurate documentation of work performed and materials used - Adhere to safety protocols and promote a safe work environment Join our team and be part of a company that values craftsmanship, safety, and professional growth. We offer competitive compensation, ongoing training, and a supportive work environment dedicated to excellence. Requirements: - Valid Journeyman Electrician license or certification - Proven experience as a journeyman electrician - Strong knowledge of electrical codes, safety standards, and best practices - Ability to read blueprints, technical diagrams, and schematics - Excellent problem-solving skills and attention to detail - Good communication and teamwork abilities - Physical ability to perform manual tasks and work in various environments - Valid drivers license and reliable transportation PI4f7dbe***********1-39320247

Lead Maintenance Technician - Conveyor Systems - needed in North Dakota - Up to $40 an hour Direct Hire, Union Benefits (no out of pocket medical costs), Overtime, Start ASAP. A global leader in conveyor technologies with several facilities in North Dakota is currently seeking several Lead Conveyor Service Technicians for long-term Direct-Hire opportunities with their growing team. These are excellent opportunities for Lead Conveyor Technicians who are looking for a company that offers great benefits, stable employment, Union Benefits, and growth opportunities. Lead Conveyor Service Technicians rates are anticipated to start between $36 to $40 per hour based on each candidates experience and education. We will pay more for the right skills and experience. All well qualified candidates will be considered regardless of pay rate. Overtime is paid at premium rates over 40 hours. We offer excellent benefits including great Medical, Dental, Paid Holidays, Generous PTO, 401k with matching, and more! Qualified Lead Conveyor Service Technicians will have most, if not all, of the following skills and experience: Experience with conveyor systems, roller and belt conveyors, diagnosing, repairing and replacing gears, belts, bearings, chains, rollers, hydraulics, and pneumatics. Must be able to align and adjust mechanical components to reduce friction, wear, and operational failures. Good basic electrical skills including using multimeters, diagnostic software, and interpreting PLC faults / alarms. Must be hands-on, open to travelling to projects and handle clients directly. Experience with scheduled / predictive maintenance and repairs is essential and on-call for emergency breakdowns. Must have experience replacing sensors, motors, VFD's, as well as basic troubleshooting of HMI's and controls circuits. Must have confidence reading electrical, pneumatic, and mechanical blueprints / manuals. Must be able to travel 50% overnight-travel, will be primarily within the state of North Dakota, and often within 2 hours of your home location. Must be able to work in the United States (no H-1 sponsorship or student visas considered). Must be able to pass standard pre-hire checks including background, drug screen, etc.

QUALIFICATIONS: Experience required. Understand blueprints and grade stakes to complete assignments as per the specifications. Must be willing to obtain “Confined Space Training Certification” which will be provided by Dakota Underground. Must be willing to obtain “Excavation Trench Safety” which will be provided by Dakota Underground. The ability to lift to 50-100 pounds with assistance from fellow team members. Ability to provide own transportation to various job sites around the Fargo/Moorhead Area. Ability to work in all environments including, cold, heat, wet, and muddy conditions. Hours will vary but can expect 7AM to 7PM at a minimum on weekdays, plus weekends as required. Overtime after 40 hours. RESPONSIBILITIES: Must comply with Company mission, vision, and values. Must work on job site with no drugs/alcohol in system. Understand and comply with all Company policies and safety procedures. Needs to have good communication skills. Responsible for the cleanliness and maintenance of equipment used daily. Must report any equipment maintenance directly to supervisor immediately. Ability to communicate any project-related issues to supervisor immediately. Become familiar with the efficient and safe digging procedures in each application. Accurately fill out timecards daily. BENEFITS: 401(k) after 1,000 hours. Health Insurance 100% Paid for Single during Construction Season.

Job Description Grotberg Electric is a growing 75 year old business with an average employment of over 10 years. We are looking for motivated individuals to join our company. We are currently seeking a Maintenance Electrician in Gwinner, ND. Work hours are 3pm-11pm. Pay - $20 - $37 per hour. We offer: 40-hour weeks with overtime available. Health Insurance Dental Insurance Vision Insurance Life Insurance Aflac 3 Weeks Paid Vacation 6 Paid Holidays Clothing Allowance Quarterly Profit Sharing Cell Phone Allowance Paid Training/ OSHA Classes, First Aid/ CPR 401K Position requires: Strong work ethic, strong organization, and people skills. Must own personal hand tools. Must be able to pass a pre-employment drug screen and background check as well as random drug screenings. Knowledge of NEC and Local Electrical Code. Knowledge of Industrial wiring methods. #hc113699

Local Electrical company is currently seeking a Full Time Service Electrician. Employer offers great benefits including health insurance, long & short term disability, retirement, paid holidays and paid vacation. Compensation is based on education and experience. Responsibilities: Install and repair electrical equipment and fixtures Troubleshoot motor and control systems Perform routine maintenance on electrical wiring and systems Qualifications: Previous experience as a Journeymen Electrician is required Must have a valid drivers license Familiarity with electrical schematics, blueprints, and manuals Familiarity with electrical equipment and hand tools Strong problem solving and critical thinking skills Ability to communicate with Homeowners & Project Managers

Responsible for maintaining Basin Electric Power Cooperative's (BEPC) 115 kV, 230 kV and 345 kV transmission system, working on wood poles, steel poles, and lattice towers up to 500 kV construction. This position safely and efficiently maintains BEPC electric power transmission lines that serve our members, participants, and customers. The incumbent maintains rights-of-way and other Cooperative assets and assist other crafts as necessary. **ESSENTIAL DUTIES** + Assist in the maintenance of transmission facilities, including both wood and steel structures using live line maintenance with Bare hand / Hot Stick procedures. This includes climbing steel and wood structures, conducting aerial and ground patrol of assigned transmission lines, tightening hardware, checking insulator strings, and replacing fatigued or broken hardware. + Install and maintain conductors under both energized and de-energized conditions. Read blueprints and diagrams in order to assemble and erect wood and steel structures. + Patrol rights-of-way and maintain these areas by fixing fences and gates and restoring washed out areas. + Maintain shop locations to ensure a clean, safe working environment and perform minor maintenance on vehicle equipment. + Perform "groundwork" to assist other linemen in the maintenance of lines and structures. + Perform other duties as assigned. **MINIMUM QUALIFICATIONS** + A High school diploma or equivalent (GED or HSED) and either 4 years of experience with an accredited lineman apprenticeship program and obtained a Journeyman Lineman rating or 4 years of related military training/experience. + May be required to have a National Commission for the Certification of Crane Operator (NCCO) designation, or willingness to obtain certification within 1 year from date of hire. + A valid driver's license in the state of residence. + Must have a Class A Commercial Driver's License (CDL) with air brakes and no CDL restrictions other than a medical variance (V). If the incumbent does not have a CDL, after six months in the position, the incumbent will be required to complete CDL theory, obtain a permit, complete Behind the Wheel, and obtain a passing grade on the CDL test by the end of the first year of employment. This is a Department of Transportation (DOT) (FMCSA) (CDL) qualified position. **This position is identified as a Critical Infrastructure Protection (CIP) related position, which may allow physical and/or logical access to Bulk Electric System (BES) cyber related assets or systems. This position may allow access to privileged information relating to such assets or systems. This position will be required to strictly adhere to all Basin Electric policies, procedures, and programs applicable to the Critical Infrastructure Protection (CIP) requirements.** **PHYSICAL AND ENVIRONMENTAL DEMANDS** This position requires frequent sitting, standing, walking, and climbing structures and ladders, including lattice steel towers and wood or steel poles to heights up to 300 feet while the lines are energized; occasional bending, climbing stairs, kneeling, reaching, crawling, use of a keyboard/computer, use of foot controls, turning valves, pushing/pulling up to 150 pounds, and lifting up to 50 pounds. Equipment used includes insulated aerial man lifts, digger trucks, all-terrain vehicles, straight trucks over 26,001 pounds, tractor/trailer combinations (semi), line tension equipment, hot line tools/ bare hand equipment, hydraulic tamps, drills, air operated tools, chain saws, and other associated equipment used in the construction and maintenance of transmission lines. Finger dexterity, good color vision and hearing, and the ability to perform close work are required. Continuously working in areas of electrical risks (energized transmission line from 34,000 to 500,000 volts); frequently working in conditions of extreme heat or cold and dirt/dust; and occasionally around fumes, chemicals, vibration, and noise. The incumbent will also be required to work at heights up to 300 feet, which requires the use of safety equipment, including a harness, in accordance with ANSI Z359 standards. Harness rating usually 300lbs, including tools, clothing, and the individual. This position is also responsible to conduct aerial line patrol. The incumbent must remain fit for duty. **KEY SKILLS** + Daily, this position requires the ability to weigh/measure, read, write, and perform basic arithmetic. + Ability to routinely climb power line structures, including lattice steel towers and wood or steel poles, to heights of 225 feet and occasionally, to more than 300 feet while the lines are energized. + Ability to perform all classes of transmission line construction, maintenance, and operation work, with emphasis on safety, skill, and efficiency. + Distinct understanding of electricity, including erecting, assembling, and splicing conductors, cables, and ropes, and an understanding tension string of conductors. + May require working under pressure. **Wage: $57.07 per hour** Basin Electric wants all interested and qualified candidates to apply for employment opportunities. If you are an applicant with a disability who is unable to use our online tools to search and apply for jobs, or who needs other assistance or accommodations, please contact us at ************. Please indicate the specifics of the assistance needed or provide your contact information, and a Basin Electric Human Resources representative will contact you. Basin Electric is an Equal Employment Opportunity Employer regarding race, color, religion, sex, sexual orientation, gender identity, national origin, disability, and veterans status.

Job Description Join our talent pipeline and be the first to be notified when we have new projects! We are seeking a skilled and safety-conscious Lineman for a Substation role to join our team. This position involves installing, maintaining, and repairing electrical equipment and systems within substations. The successful candidate will work closely with other linemen, engineers, and technicians to ensure the safe and reliable operation of power transmission and distribution systems. Installation & Maintenance: Install, maintain, and repair electrical lines and equipment such as transformers, circuit breakers, switches, and substations. Inspection: Inspect and test substations and electrical equipment to ensure operational safety and functionality. Troubleshooting: Diagnose faults in electrical systems and perform necessary repairs or replacements. Safety & Compliance: Follow all safety guidelines, protocols, and regulatory requirements (OSHA, NESC) while working in substations and on power lines. Emergency Response: Respond to emergency calls, outages, and other critical issues promptly and efficiently. Collaboration: Work alongside other linemen, electricians, engineers, and operations teams to ensure a continuous flow of power. Record Keeping: Maintain accurate records of work performed, equipment installed, and any system maintenance or repairs. Equipment Use: Operate specialized tools and equipment such as aerial lifts, cranes, power drills, and testing devices. Training: Continuously improve skills through training programs, certifications, and on-the-job learning. Requirements Position Qualifications Required: Previous experience in electrical line work or similar field. Ability to work outdoors in various weather conditions and at elevated heights. Strong understanding of electrical safety protocols and regulations. Ability to work varied shifts, including nights and weekends as required. Willingness to travel Previous experience in a substation environment. Preferred: Completion of an accredited training program or apprenticeship in electrical line work. Knowledge of electrical systems and troubleshooting techniques. High school diploma/GED; additional preference given for degree from Vocational, Technical, or Community Colleges or Apprenticeship programs. Key Responsibilities: Installation & Maintenance: Install, maintain, and repair electrical lines and equipment such as transformers, circuit breakers, switches, and substations. Inspection: Inspect and test substations and electrical equipment to ensure operational safety and functionality. Troubleshooting: Diagnose faults in electrical systems and perform necessary repairs or replacements. Safety & Compliance: Follow all safety guidelines, protocols, and regulatory requirements (OSHA, NESC) while working in substations and on power lines. Emergency Response: Respond to emergency calls, outages, and other critical issues promptly and efficiently. Collaboration: Work alongside other linemen, electricians, engineers, and operations teams to ensure a continuous flow of power. Record Keeping: Maintain accurate records of work performed, equipment installed, and any system maintenance or repairs. Equipment Use: Operate specialized tools and equipment such as aerial lifts, cranes, power drills, and testing devices. Training: Continuously improve skills through training programs, certifications, and on-the-job learning. Working Conditions: Hours: Must be available for shifts, weekends, holidays, and on-call work as required. Environment: Outdoor work in all weather conditions; climbing utility poles, working with heavy electrical equipment, and at high altitudes. Travel: Some travel may be required for installations, repairs, or emergency response.

Job Description QUALIFICATIONS: Experience required. Understand blueprints and grade stakes to complete assignments as per the specifications. Must be willing to obtain “Confined Space Training Certification” which will be provided by Dakota Underground. Must be willing to obtain “Excavation Trench Safety” which will be provided by Dakota Underground. The ability to lift to 50-100 pounds with assistance from fellow team members. Ability to provide own transportation to various job sites around the Fargo/Moorhead Area. Ability to work in all environments including, cold, heat, wet, and muddy conditions. Hours will vary but can expect 7AM to 7PM at a minimum on weekdays, plus weekends as required. Overtime after 40 hours. RESPONSIBILITIES: Must comply with Company mission, vision, and values. Must work on job site with no drugs/alcohol in system. Understand and comply with all Company policies and safety procedures. Needs to have good communication skills. Responsible for the cleanliness and maintenance of equipment used daily. Must report any equipment maintenance directly to supervisor immediately. Ability to communicate any project-related issues to supervisor immediately. Become familiar with the efficient and safe digging procedures in each application. Accurately fill out timecards daily. BENEFITS: 401(k) after 1,000 hours. Health Insurance 100% Paid for Single during Construction Season. #hc86057

Meet the team that brings our projects to life. From logistics to electrical work, everyone in the field plays a critical role in building, powering, and delivering success on a jobsite. Our logistics professionals keep construction moving by ensuring a steady flow of inventory. They bring attention to detail and strong organizational skills as they procure tools and materials for our electricians. Apprentice electricians are the powerhouses behind our most dynamic projects, while summer interns and new graduates kick off their careers as industrial electrical professionals. These team members work closely with our journeyman electricians-seasoned experts who lead and mentor crews while completing complex projects. Our journeyman electricians partner with field foremen and site superintendents, who coordinate work, manage risks, and keep projects on track through planning, motivation, and communication. Our I&E, service, and maintenance teams ensure project performance by installing, testing, troubleshooting, and calibrating equipment. Across roles, we all champion safety-empowering employees to lead as safety shareholders, uphold zero-injury expectations, and care for our crews, company, and families. Journeyman Responsibilities * Measuring, cutting, bending, threading, assembling, and installing conduit * Overseeing, or participating in, wire installations with conduit & cable tray * Connecting power to equipment * The ability to lead/develop up to 4 apprentice electricians * Knowledge of other construction trades * Ability to stand, walk ,and lift up to 100 lbs in construction work environment * Ability to climb, and maintain balance, on ladders and scaffolds while carrying tools * May be exposed to high and precarious places * Risk of electrical shock and outside weather conditions * Personal Protective Equipment (PPE) required * Other duties may be assigned Qualifications Education & Experience: We are looking for electricians with experience using, or the desire to learn, the latest BIM/VDC technologies for pre-planning and on-site coordination of all Interstates projects. * Must have state issued journeyman electrician license (or equivalent) * Industrial electrical experience required. * Knowledge of BIM/VDC Technology preferred. Location/Travel: This position will require travel in/around Wahpeton, ND - up to/within a 200-mile radius. Applicants must be permanently located in/around the office location or be willing to permanently relocate. Applicants must have reliable transportation and a valid driver's license. Per diem and mileage stipends applicable per company policy. Work Schedule: Start times, break times and work hours vary per site and stage of our projects. Our employees work more than 40 hours per week but no more than 60, as part of our commitment to safety. Due to the type of construction, weekend work maybe required on occasion. Work Environment: While performing the duties of this job, this role is often exposed to high/precarious places, risk of electrical shock, and all outside weather conditions. This role is expected to climb and work at heights and in confined spaces. The noise level in the work environment is usually moderate. Due to the nature of our work and our client base, this role may involve tasks in an environment exposed to dust. Candidates should be comfortable working in these conditions and complying with safety standards to protect their well-being. Benefits of Working at Interstates: * 401(k) Retirement Plan + Company Match * Health, Dental, and Vision Insurance Benefits (Short & Long-Term Disability, Group Life Insurance, and more) * Company Discount Perk Program (Access to discounts with renown brands across the country) * Paid Time Off & Holiday Pay, Flexible Schedule (Support work/life balance) * Bonus Incentives (End of Fiscal Year Incentives and Merit Increases) * Per Diem/Travel Pay or FAVR Program Benefits (as applicable) * Family & safety culture - a team that cares about you as a whole person, not just what you do at work * Company Sponsored Holiday Events, Team Celebrations, and Community Outreach Volunteer Time * Advancement Opportunities unique to our employee's long-term goals * Company Issued Cordless Milwaukee Tool Kit * Continuing Education & Journeyman Licensing Renewal Assistance * Double Pay for Sunday Work, Triple Pay if working an occasional holiday

Join Our Team: Transmission Power Linemen Wanted Mountainside Power is currently seeking experienced Transmission Power Linemen to join our expanding team. We are looking for reliable professionals who take pride in their craftsmanship, demonstrate sound judgment under pressure, and are committed to delivering high-quality work on every project. Position Requirements: Demonstrated experience in transmission power line construction and maintenance Proficiency in the safe and effective operation of heavy equipment Strong knowledge of OSHA regulations and adherence to job site safety protocols Physically capable of climbing, lifting, and working at elevated heights Team-oriented mindset with a positive attitude Ability to work independently and lead by example when necessary Valid CDL preferred Must successfully pass a pre-employment drug screening and background check Willingness to work 30-80 hours per week, including weekends and travel as required What We Offer: Competitive compensation Daily per diem for travel assignments Comprehensive health, dental, and vision insurance 401(k) retirement plan with company match Clear pathways for career advancement and professional development Immediate start dates available If you're a dependable professional who takes pride in delivering exceptional results, we encourage you to apply today and become part of a company that truly values your expertise and commitment. ?? Now Hiring - Immediate Openings Available