Maintenance electrician jobs in Toledo, OH - 467 jobs

Electrician Job Accountabilities This position is for 1st Shift - 7:00a - 3:00p. Employee will work 8 hours shifts, Monday through Friday, with weekend work for inspections, preventative maintenance, projects etc. Electricians are paid a base rate of $33.44/hour. Must be able to work overtime if necessary. The Maintenance Electrician maintains and enhances the electrical infrastructure of our coil coating factory in Toledo, Ohio. The position will perform preventative and corrective repairs, interpret blueprints, troubleshoot issues, uphold safety standards and keep detailed documentation. This is a hands-on position that will be required to support a variety of duties and responsibilities in this continuous operation. Duties And Responsibilities: Perform preventive and corrective maintenance on electrical systems for production machinery, conveyors, motors, and control panels. Diagnose and repair electrical issues on automated equipment, including PLCs, VFDs, and motor control circuits. Install and maintain wiring, conduit, circuit breakers, transformers, and other electrical components in compliance with NEC and OSHA standards. Read and interpret electrical schematics, blueprints, and equipment manuals to plan and execute repairs. Test electrical systems using meters and diagnostic tools to ensure proper functionality and safety. Collaborate with maintenance and production teams to minimize downtime and improve equipment reliability. Maintain accurate records of maintenance activities and report findings to supervisors. Respond to emergency breakdowns and support continuous production operations. Ability to work safely in a fast-paced manufacturing environment and comply with OSHA and NFPA 70E standards. Performs other job-related duties as required or assigned Qualifications: In addition to the specific responsibilities listed above, the ideal candidate will possess the following: High school diploma or equivalent; technical certification or completion of electrician apprenticeship preferred. Minimum 3-5 years of experience as an industrial or manufacturing electrician. Strong knowledge of electrical systems, motor controls, PLC troubleshooting, and industrial automation. Familiarity with CMMS (Computerized Maintenance Management Systems) for scheduling and documentation. Good analytical and problem-solving skills Fully comply with all company and plant safety practices and policies Must have experienced skills in troubleshooting, repair, overhaul, and operation of high speed production machinery. Ability to perform math functions and comprehend complex verbal and written instructions Pass pre-employment testing, (drug test, background check, mechanical aptitude testing) Offer competitive wages and a comprehensive benefits package that includes valuable health care, income protection and retirement benefits, as well as paid time off. Possible equivalent Military Job Titles: Building Electrician; Construction Electrician; Power Plant Electrician; Precision Instrument and Equipment Repairer; Ship Electrician; Communications Equipment Operator; Avionics Technician. Electronics Technician.

The role of a Plant Maintenance technician is to participate in the Total and Preventive Maintenance (TPM) for all equipment and facilities. The main missions of the role are to: Install, repair and maintain all equipment Maintain Facilities equipment as required Analyze mechanical, electrical, hydraulic and pneumatic problems on assigned equipment and make necessary corrections to maintain maximum production and quality Propose and implement continuous productivity and quality improvement actions for all facilities and processes for efficiency Keep up to date documentation related to maintenance / completion of PM's Continuously improving knowledge base Maintain clean and safe working environment in line with company policy Adheres to all work rules and procedures Adheres to the Code of Ethics Adheres to the Code of Management Additional responsibilities include: Actively participate in work teams Implement at least six improvement idea per month Other duties as requested Job Knowledge / Skills / Qualifications: Technical diploma and/or journey man card or 5 years minimum experience Adjustment of robot programs as required / Training provided Perform tasks of substantial variety/complexity Strong Electrical troubleshooting and mechanical repair skill set Hydraulic and Pneumatic troubleshooting required Working knowledge of Quality systems and Health, Safety and Environmental systems Strong technical problem solving skills Strong teamwork and interpersonal skills Satisfactory company work record, including attendance Successful completion of Faurecia's in-house training programs Ability to follow instruction verbal and written - good math, language and reading skills required Good communication skills demonstrated by the ability to communicate with employees of all levels Forklift/Scissor/Boom certification - successful completion of Franklin certification trainings Demonstrate the ability to work as part of a team and in a positive manner Valid drivers' license Physical Requirements: Job involves lifting and carrying up to 50 pounds, exerts 25 to 100 pounds of force occasionally to move objects Requires pushing, pulling, reaching, standing, walking, gripping and bending High mental and visual effort required Able and willing to work overtime as required. Flexibility to help on other shifts when needed Pay Details: $25.00 to $30.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Responsible for the repair and maintenance of machinery and mechanical equipment, including engines, motors, pneumatic tools, conveyor systems, and production machines. Prior experience with press machines is highly preferred. ESSENTIAL DUTIES AND RESPONSIBILITIES The following are key responsibilities of the role. Additional duties may be assigned as needed: Adhere to all company policies and procedures, including Standard Operating Procedures (SOPs), the Environmental Management System, and employment guidelines relevant to this position. Monitor mechanical devices during operation and identify sources of malfunction through sound and performance analysis. Disassemble equipment to access, repair, or replace defective components. Inspect and evaluate parts for wear, defects, or irregularities in form and texture. Measure and assess parts to ensure they meet required specifications. Adjust, repair, or replace malfunctioning components and control instruments. Install functional and structural parts in machinery. Perform routine lubrication and cleaning of parts and equipment. Test equipment to ensure proper functionality after repair. Operate machine tools such as lathes, drill presses, and grinders to fabricate or repair components. Initiate purchase orders for necessary parts and equipment.

Overview Industrial Electricians (Ideal for Navy EMN or ETN) These positions are an immediate need and require relocation to Fort Wayne, IN. (If you meet this criteria but prefer a different location, contact us to review additional opportunities.) Full-Time | $90,000-$100,000+ Total First Year Compensation | Career Opportunity with an Industry Leading Company Our client is seeking highly skilled Industrial Electricians to join their expanding team. This is an exceptional full-time career opportunity designed for candidates with a strong technical foundation, particularly those with U.S. Navy Nuclear Electrician (EMN) or Nuclear Electronics Technician (ETN) backgrounds. If you thrive in fast-paced environments, excel at troubleshooting complex systems, and want to grow with a company that values technical excellence, we want to meet you. Key Responsibilities Perform electrical maintenance, troubleshooting, and repair on industrial equipment and control systems. Work with PLC-based controls, instrumentation, sensors, and automated systems. Diagnose electrical and electronic faults using schematics, test equipment, and system knowledge. Support installation, calibration, and commissioning of new equipment. Maintain and update documentation, wiring diagrams, and maintenance logs. Collaborate with engineering, operations, and maintenance teams to ensure system reliability. Participate in on-site technical support, system upgrades, and continuous improvement initiatives. Ensure all work complies with safety, quality, and operational standards. Ideal Candidate Profile U.S. Navy Nuclear Electrician's Mate (EMN) or U.S. Navy Nuclear Electronics Technician (ETN) Strong background in electrical systems, controls, instrumentation, and troubleshooting. Experience working with high-reliability systems, technical procedures, and strict safety protocols. Ability to interpret electrical schematics, wiring diagrams, and technical manuals. Comfortable relocating for a long-term career opportunity. Strong analytical thinking, attention to detail, and problem-solving ability. Compensation & Benefits $90,000-$100,000 first-year compensation, depending on experience. Full benefits package (health, dental, vision, retirement). Significant long-term growth and advancement opportunities within a rapidly expanding organization.

Overview Industrial Electricians (Ideal for Navy EMN or ETN) These positions are an immediate need and require relocation to Fort Wayne, IN. (If you meet this criteria but prefer a different location, contact us to review additional opportunities.) Full-Time | $90,000-$100,000+ Total First Year Compensation | Career Opportunity with an Industry Leading Company Our client is seeking highly skilled Industrial Electricians to join their expanding team. This is an exceptional full-time career opportunity designed for candidates with a strong technical foundation, particularly those with U.S. Navy Nuclear Electrician (EMN) or Nuclear Electronics Technician (ETN) backgrounds. If you thrive in fast-paced environments, excel at troubleshooting complex systems, and want to grow with a company that values technical excellence, we want to meet you. Key Responsibilities Perform electrical maintenance, troubleshooting, and repair on industrial equipment and control systems. Work with PLC-based controls, instrumentation, sensors, and automated systems. Diagnose electrical and electronic faults using schematics, test equipment, and system knowledge. Support installation, calibration, and commissioning of new equipment. Maintain and update documentation, wiring diagrams, and maintenance logs. Collaborate with engineering, operations, and maintenance teams to ensure system reliability. Participate in on-site technical support, system upgrades, and continuous improvement initiatives. Ensure all work complies with safety, quality, and operational standards. Ideal Candidate Profile U.S. Navy Nuclear Electrician's Mate (EMN) or U.S. Navy Nuclear Electronics Technician (ETN) Strong background in electrical systems, controls, instrumentation, and troubleshooting. Experience working with high-reliability systems, technical procedures, and strict safety protocols. Ability to interpret electrical schematics, wiring diagrams, and technical manuals. Comfortable relocating for a long-term career opportunity. Strong analytical thinking, attention to detail, and problem-solving ability. Compensation & Benefits $90,000-$100,000 first-year compensation, depending on experience. Full benefits package (health, dental, vision, retirement). Significant long-term growth and advancement opportunities within a rapidly expanding organization.

Responsibility / Authority Electrical Technicians have the responsibility to: Accept a variety of task assignments in the electrical area in both the Float and OE Fabrication facilities. Accept production assignments when necessary to meet business needs. Identify, record, maintain logs and communicate any problems relating to the product or process. Abide by all Federal, State, and Local requirements related to generating and disposing of hazardous and non-hazardous waste material. Follow all Plant/Companies rules, policies and procedures and contractual agreements. Conform to expected conduct in a business environment. Follow the Quality, Environmental and Safety policies. Team members have the authority to initiate, recommend or provide solutions to problems through designated channels. Responsible for calibrating and checking instruments. Respond quickly to emergency situations. Perform routine maintenance on production equipment and repair on them when necessary. Wire machines and electrical panels in line with prints. Troubleshooting: identify a problem and logical solutions to repair them. Browse blueprints and schematics and use an array of tools and diagnostic devices to service and install electrical components Quality Responsibility I am responsible for maintaining an effective QS9000 Quality system that is current, used, understood and maintained in my area of the facility according to QS9000 Guidelines and to continually improve the products, processes and services and to ensure customer satisfaction (Quality Policy). I am responsible for all audits conducted and will ensure all processes meet audit requirements. Safety Precautions Enforces all safety requirements. Ensure 10 Key Safety Leadership Behaviors, all safety rules, policies and procedures are met. Maintain a safe working environment. 10 Key Leadership Behaviors: 1. Recognize safe behavior to reinforce it and encourage it to continue 2. Never walk past an unsafe behavior without talking to the person 3. Be more intolerant of continued unsafe behavior 4. Ensure your team always wears their PPE even when you are not there 5. Ensure high standards of housekeeping are maintained 6. Talk regularly to your team about safety; not just at the monthly brief 7. Encourage your team to get involved in proactive safety 8. Ensure all safety actions are progressed to completion and let people know particularly if it will take some time to complete 9. Be visible on the shop floor talking and listening to your team 10. Demonstrate to your team that you care about their health and safety Environmental Responsibility I am responsible and accountable, for assuring that my departments are operated in a manner consistent with the Pilkington Environmental Policy. Specifically, for operating my departments in a manner which; 1) Ensures full compliance with all applicable environmental laws and regulations, 2) Prevents pollution wherever possible, and 3) Encourage activities which lead to continual improvement in Pilkington's environmental performance. Essential Functions Inspecting and testing the operation of electrical components and systems Installing new industrial electrical systems, including wiring, conduit, and electrical apparatus Identifying and repairing electrical problems using a variety of testing devices Reading and interpreting electrical and electronic circuit blueprints, diagrams, and schematics Carrying out preventive maintenance to avoid unnecessary repairs and downtime in the facility. Documenting repairs and maintenance procedures for future reference. Adhering to all safety policies, procedures, and regulations to ensure a safe working environment. Communicating effectively with management, engineers, and co-workers about maintenance progress and challenges Preform electrical maintenance as required to maintain the operation. Perform preventative maintenance as scheduled. Work on projects as scheduled or required to maintain the operation. Required to assist in training others. Participate in all audits: STOP Audits, GO Audits, internal audit, cross facility, management, and third-party registration audits. (These are not an all-inclusive list but represent common examples). Adhere to 5S and housekeeping standards and responsible for cleaning up of work areas upon completion of tasks. Ensure work meets required standards. Participate in required training and successfully complete required assessments or testing to verify understanding and knowledge. Required to work in a safe, efficient, effective, and reasonable pace. Other duties as assigned. Physical Requirements: This position requires the ability to work a 12-hour schedule, including days, nights, weekends, and holidays as needed. The role involves prolonged periods of standing and walking, often exceeding 12 hours per day. Candidates must be able to climb stairs, crouch, kneel, and maintain balance in various working environments. The role will require the use of various PPE* items including but not limited to safety glasses, hi-vis clothing, respiratory, etc. The position also requires the ability to frequently lift and carry objects weighing up to 10 pounds, and occasionally lift items over 50 pounds. Occasionally exposed to plant environment including noise, dust, dirt and vibrations, extreme climate changes. Availability to work for extended periods during emergency repair work. A successful candidate must be physically capable of performing these tasks safely and consistently in a manufacturing setting.

Main power drops/termination,lockout/tagout, testing voltage with meters, sub plate assembly, wiring Servos, Robot controllers, field I/O, enclosure layouts, communication cables, duct work for routing cables, enclosure termination, reading schematics, troubleshooting.

Full-time Description Come Join the Toledo Tool & Die Team! Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has four facilities in the Toledo area and one in Pioneer, Ohio. Toledo Tool & Die is adding Maintenance/Electrical Technicians to our team to support our continued growth. This is a full-time position based Maumee, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment. Come join our team! Hours for this position are typically: 1st Shift: Monday-Friday, 6AM-2PM 2nd Shift: Monday-Friday, 2PM-10PM 3rd Shift: Sunday-Thursday, 10PM-6AM WHAT TOLEDO TOOL & DIE CAN OFFER YOU: Weekly pay $32-38/hour based on experience 10 paid holidays Paid Time Off 401k Full benefits (medical, dental, vision) WHAT MAKES YOU A GREAT FIT FOR THIS POSITION: Previous experience in metal stamping Strong work ethic Positive attitude Consistent attendance Willingness to learn Safety minded KEY RESPONSIBILITES: Perform simple-to-complex duties to install and maintain production machines and the plant's equipment. Provide assistance for emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service. Perform electrical duties including, but not limited to PLCs, reading and interpreting electrical drawings and schematics; Working with 120v, 220v, 480v and 13.8k volt circuits; Installing/repairing and trouble-shooting starters, relays, switches, proximity circuits, variable frequency drives (VFD), contactors and input/output circuits. Perform mechanical tasks including, but not limited to, mechanical, pneumatic, hydraulic, troubleshooting and repair of production machines. Read and interpret equipment manuals and work orders to perform required maintenance and service. Perform simple machinist duties and responsibilities. Perform simple to complex fabrication projects which typically involving welding components together. Diagnose problems, replace or repair parts, test and make adjustments. Perform regular preventive maintenance on machines, equipment and plant facilities. Perform a variety of plumbing maintenance and carpentry functions. Perform aerial tasks using a scissor lifts, baskets and booms. Use a variety of hand and power tools, electric meters and material handling equipment in performing duties. Detect faulty operations, defective material and report those and any unusual situations to proper supervision. Experience reading and interpreting Blueprints, electrical schematics and technical manuals. Comply with safety regulations and maintain clean and orderly work areas. Authority to stop production in the event unsafe parts or conditions appear. Performs other duties as assigned by the immediate Supervisor and/or Manager, which may be outside the scope of responsibilities noted above. Requirements Must be at least 18 years of age. High School Diploma or equivalent. Eligible to work in the United States. Must be able to satisfactorily complete pre-employment screening (background check and drug screen). Identified candidates must be able to work overtime (daily, weekends and holidays). Experience in industrial maintenance 5+ years of progressive industrial experience in the following: electronics, hydraulics, pneumatics, mechanical and industrial skills. Must be able to work in a dynamic and fast paced environment. Report to work on time to support production startup. Possess good physical stamina and coordination. Must be able to stand, stoop, kneel, crouch or climb for extended periods of time. Must be able to lift/push/pull objects that are up to 50 pounds. Work as a team, good communication skills, basic math skills, physical dexterity. Must have valid drivers' license Toledo Tool & Die is an equal opportunity employer.

ESSENTIAL JOB FUNCTIONS: • Installs, maintains, calibrates, adjusts, trouble-shoots, and repairs treatment plant instrumentation, telemetering, and electrical systems and filing system (including, but not limited to, electric motors, variable frequency drives, switches, gauges, solenoids, relays, control panels and motor control centers, flow meters, transmitters, transducers, level control systems, programmable logic controllers). • Conducts electric and electronic tests, installs conduit and wire, and controls and services same as needed • Set up, stocks, and keeps readiness, an electrical, electronic, and instrumentation repair shop and uses specialized electric and electronic tools and diagnostic equipment. • Works with Operators, Maintenance Specialists, and other WRRF staff on a variety of plant equipment and facilities as needed. • Installs electrical equipment and systems such as light fixtures, transformers, high voltage switches, circuits, electrical panels, power distribution, any necessary wiring, and laying conduit. • Performs preventative maintenance and repairs on circuits, motors, electrical switches, heaters, appliances, transformers, sampling equipment, and power distribution. • Performs routine inspections of electrical systems, wiring, components, and accessories throughout the facility. • Reads blueprints, sketches, and layouts; provides recommendations for replacing/upgrading electrical/electronic equipment as necessary. • Cleans up work sites after completion of jobs; keeps work areas, repair shop, and stock room organized and clean • Additional duties as assigned. MINIMUM OUALIFICATIONS: • Possess a journeyman's card in the electrical trade or electrical license from the State of Ohio. OR Graduated from an accredited college with an Associate's Degree in Electronic/Electrical Engineering Technology, Industrial Electronics, Automation Electronics, or a closely related field AND have four (4) years of documented work experience in the electrical and instrumentation field; • Have a minimum of two (2) years of experience in installing, repairing, calibrating, and trouble-shooting electronic instrumentation to include, but not limited to, programmable logic controllers, variable frequency drives, control panels, motor control centers (MCCCs), and other process control devices; as well as experience in the installation of conduit and wire, and use of diagnostic equipment. • Possess a Class 1 Wastewater Operator Certification, or ability to obtain in two (2) years. • Valid driver's license with driving privileges in the State of Ohio. KNOWLEDGE, SKILLS, AND ABILITIES: • Knowledge of current electrical practices, electrical codes, electrical safety and equipment • Knowledge of wastewater treatment facilities and functions • Knowledge and skills to recognize need for repairs and to repair electrical equipment • Knowledge of control and relay logic • Ability to use a computer with database management system • Ability to read blue prints • Ability to apply principles and instructions to solve common problems • Ability to troubleshoot electrical circuits and programmable logic controllers, relay logic programming, va1iable speed drives • Ability to work independently, multi-task, and prioritize work duties • Ability to develop and maintain accurate records and inventories, and provide written reports and summanes • Ability to communicate effectively and work well with others • Ability to work in a group or alone UNUSUAL WORKING CONDITIONS: • Exposure to cold and/or wet weather • Exposure to varied and unusual odors

Job Title: Maintenance and Electrical Controls Technician Reports To: Maintenance Supervisor Primary Purpose: The Maintenance Technician plays a critical, hands-on role in supporting plant uptime and performance. This position is 100% floor-based, directly responding to equipment breakdowns, performing preventive maintenance, and assisting with project-related tasks. A core responsibility of this role is to troubleshoot Mechanical, Electrical and PLC based control system issues in real time to minimize downtime and support efficient operations. The ideal candidate is a strong problem solver, highly responsive, and thrives in a fast-paced manufacturing environment Primary Duties & Responsibilities Real-Time Equipment Support & Troubleshooting Immediately respond to breakdowns and perform on-the-spot repairs to restore production. Troubleshoot electrical, mechanical, pneumatic, and hydraulic systems, including PLC I/O and instrumentation. Collaborate with operators to identify and resolve root causes of equipment malfunctions. Support line changeovers and production start-ups. PLC and Electrical Control Support Diagnose and repair PLCs, HMIs, VFDs, and control-related issues. Troubleshoot systems using tools such as Allen-Bradley RSLogix 5000. Assist with equipment upgrades, installations, and control panel builds. Run conduit, pull wire, and terminate Ethernet and communication cabling. Preventive Maintenance and Continuous Improvement Perform scheduled preventive maintenance with focus on reliability and efficiency. Take ownership of specific PM areas and proactively improve them. Accurately document all maintenance activities in the CMMS. Identify recurring issues and propose long-term corrective actions. Project and Fabrication Work Assist in machinery installation and facility improvement projects. Perform light fabrication and welding for safety and efficiency-related improvements. Safety & Communication Always follow safety protocols and use proper PPE. Keep work areas clean, organized, and free from hazards. Attend and contribute to daily shift meetings and status updates. Key Attributes & Abilities Strong problem-solving and troubleshooting skills. Ability to work under pressure and make fast, informed decisions. Good communication and team collaboration abilities. High personal accountability, attention to detail, and reliability. Open-minded and eager to learn new systems and technologies. Willing to work 8- or 12-hour shifts depending on business demands, with overtime as needed. Qualifications & Experience High school diploma or equivalent required; technical certifications or trade school training preferred. Minimum 4 years of industrial maintenance experience, preferably in a manufacturing environment. Demonstrated experience with PLC troubleshooting and industrial electrical systems. Working knowledge of RSLogix 5000 or similar programming environments preferred. Ability to interpret electrical, hydraulic, pneumatic, and mechanical schematics. Basic welding and fabrication skills. Understanding of Lean principles, 5S, and Root Cause Analysis is a plus. Familiarity with CMMS platforms for logging repairs, PMs, and work orders; ability to navigate and input data accurately. Physical Requirements Must be able to remain on the factory floor for long periods of time, potentially a full shift Ability to lift, push, pull, or carry up to 50 lbs. Ability to crouch, bend, kneel, squat, twist, reach, and stand for extended periods Ability to perform equipment maintenance tasks requiring full-body movement and sustained physical effort Requires full range of motion in arms, hands, and fingers to reach, grasp, hold, push, pull, twist, and use tools Must be able to climb and work on ladders Ability to stay alert and react quickly to plant conditions Schedule may require 40+ hours per week to support manufacturing production. Note: The statements above are intended to describe the general nature and level of work being performed by people assigned to the job. They are not construed to be an exhaustive list of responsibilities, duties and skills required of personnel in the job. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.

Job Description Are you a skilled craftsman with electrical experience and a passion for helping others? Are you ready to join a dynamic team that values innovation, expertise, and attention to detail? Look no further! We are currently seeking an experienced person to join our team at Kern Liebers USA in our Maintenance department. The Maintenance position plays a crucial role in our production process utilizing your expert knowledge and hands-on skills to maintain, repair, and/or rebuild complex machinery and equipment including trouble shooting and problem solving of electronic & mechanical systems. If you thrive in a challenging environment and possess exceptional problem-solving abilities, we invite you to apply for this exciting opportunity. Join us and become an integral part of our dedicated team, where your knowledge will contribute to the creation of high-quality products that make a difference. Duties Include Planning, fabrication and installation of new wiring for fixtures, equipment, and building systems. Electrical knowledge is a must, will rewire machines. Perform preventative maintenance per work orders. Diagnose problems and develop/implement solutions. Order supplies, discuss scheduling and work order administration with Production Manager. Requirements Must have at least two years of manufacturing electrical experience High school degree or equivalent required. Journeyman's Card required. Have completed a D.O.L. certified apprentice program in an appropriate field, plus (4) four years experience in industrial maintenance operations after apprenticeship or appropriate vocational training Industrial experience with eight (8) years performing industrial maintenance functions. Must possess basic computer skills. Must be able to work independently with written or verbal instructions. Compliance with all Safety, TS 16949, and ISO 9000 requirements. Working knowledge of 5S. Ability to work in a fast-paced environment. Ability to operate overhead hoist and any other equipment necessary to perform duties. Able to operate a forklift and pallet jack. Must be able to lift up to 50 lbs occasionally. Must be able to stand, walk, and bend for most of the shift. Some climbing, crawling, and/or kneeling may be required. Valid driver's license needed. Benefits This position pays up to $35.00/hour. This rate includes an additional 8% weekly incentive & 3% attendance incentive each week. This is a 1st shift, union position. We offer a competitive compensation and benefits package. Within our benefits package: affordable medical insurance, dental insurance, vision insurance, life insurance, long- and short-term disability (at no cost to you), 401k with company match, and paid vacation.

Job Description Electrical Controls Technician - 3rd Shift JOIN A TEAM THAT CHANGES LIVES Principle Business Enterprises, Inc. (PBE) is a family-run, value-driven organization with big hearts and true passion for what we do.Celebrating over 60 years of service to the healthcare field and over 30 years as a pioneer in the development of incontinence and moisture management solutions, we're living our mission to improve the lives of caregivers, those who wear our products and our workforce. Our commitment includes innovative and life-changing products; positive partnerships with customers and suppliers; wellbeing programs that support our Associates and their families; and community support. We offer excellent health benefits including free access to onsite and a local health clinic, paid personal and vacation time, an annual profit-sharing bonus, a 401k plan with a company match, company-paid disability and life insurance, and more. We also offer many perks that recognize our associates' hard work and allow them to have fun! We are a safe and clean manufacturing plant looking for respectful, team-oriented candidates who have a great work ethic and thrive in a fast-paced environment focused on safety, continuous improvement and producing quality products that help the lives of others. Learn more about PBE's culture and benefits by clicking here. POSITION SUMMARY: The Electrical Controls Technician is responsible for troubleshooting, maintaining, repairing, programming and installing electrical control systems used in manufacturing, including plant power distribution equipment, facility electrical equipment and auxiliary systems. SPECIFIC RESPONSIBILITIES:- Troubleshoot electrical control systems, and mechanical, pneumatic, hydraulic, and general industrial control equipment. Identify and perform machine preventative maintenance and repairs based on machine operation and condition. Identify equipment requiring periodic maintenance and help develop and maintain schedules for maintenance intervals. Interact with production and operations associates to determine machine issues and resolution action plans. Set priorities based on production needs. Account for and record parts and supplies used for repairs of equipment and plant utilities. Develop B-O-Ms for electrical jobs performed in the plant. Involvement in determining spare parts stock levels and part types. Involved in developing a standard parts scheme for the plant. Involvement in creating and maintaining plant electrical system documentation. Keep plant electrical test equipment in proper working condition. Build new electrical control equipment as well as modify existing equipment. Read, develop and interpret technical documents and drawings (operating/maintenance instructions, electrical drawings and schematics, programs, procedure manuals). Perform & manage small to medium plant electrical projects and work orders. Keep abreast of new electrical control technologies. Be available for off-shift technical support to production lines. Develop and conduct technical training for other plant associates. Operate, utilize, and maintain a personal computer for electrical troubleshooting, programming, configuring, and general maintenance of electrical control equipment. Demonstrate analytical and problem-solving skills. Understand & follow NEC/NFPA 70, 70E, & 79, as well as OSHA code regulations as they pertain to the plant facility & equipment. MINIMUM QUALIFICATIONS:- 3+ years of experience in electrical/industrial controls. Working knowledge of PLC programming, variable speed drive systems/motion control systems, HMI (Human Machine Interface) programming Working knowledge of temperature controls systems Excellent analytical and problem-solving skills PREFERRED QUALIFICATIONS:- Associate's degree in electrical engineering or a related field Experience in project management PHYSICAL REQUIREMENTS:- Must be able to stand for long periods; use hands to handle objects, tools, or controls; reach with hands and arms; climb, stoop, kneel, and/or crouch. Must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Must have close, distance, color, & peripheral vision abilities along with depth perception and the ability to adjust focus. *Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. We are an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Successful candidate will perform a wide variety of electrical tasks including building control and motor control panels, mounting panels to skids, running conduit and wire to panels and instrumentation on skids and termination testing. Must be skilled in the use of hand and power tools and familiar with 480v, 120v and 24v power and control systems. Typically 2 years and above documented field experience in electrical discipline with ability to read and interpret instructions and document, plan and perform work activities independently. Other duties as assigned. Key Responsibilities/Accountabilities: Prepares sketches showing location of wiring and equipment or follows diagrams or blueprints ensuring that wiring is installed before completion of closed areas. Measure, cut, bend, thread, assemble and install electrical conduit using such tools as a hacksaw, pipe threader, rules and conduit benders. Pulls wiring through conduit, assisted by helper. Splices wires following company and customer requirements. Connect wiring to equipment using hand tools. Install control and distribution apparatus, such as switches, relays and circuit- breaker panels, and fasten in place with crews or bolts using hand or power tools. Connect power cables to equipment and installs grounding leads. Test continuity of circuit to ensure electrical compatibility and safety of components using testing instruments such as ohmmeter, battery and buzzer and oscilloscope. Observe functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacement. Disassemble and repair defective electrical equipment or systems. Load, transport and unload material, tools, equipment and supplies. Maintain tools and equipment. Be able to distinguish colors. Work within precise limits or standards of accuracy. Make decisions based on measurable criteria. Apply basic mathematics to solve problems. Responsible for observing and complying with all safety and project rules. Performs other duties as required. Basic Qualifications: May require a high school diploma or its equivalent with 2 previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. 2 or more years of experience as an industrial electrician. Familiar with NEC and NFPA 70 E Codes. Perform maintenance or cleaning activities of tools and equipment. Respiratory protection is common and may be required. Required to pass employer performance tests or standard tests to meet certification standards. Visualize objects in three dimensions from plans and drawings. Compare and see differences in the size, shape and form of lines, figures and objects. Shop works four 10 hour shifts per week, Mon-Thurs. 6:00 AM to 4:30 PM. Overtime may be required. ABOUT APTIM APTIM is committed to accelerating the transition toward a clean and efficient energy economy, building a sustainable future for our communities and natural world, and creating a more inclusive and equitable environment that celebrates the diversity of our communities. We specialize in environmental, resilience, and sustainability and energy solutions, as well as technical and data solutions, program management, and critical infrastructure. For every challenge our clients face, there is an opportunity for APTIM to innovate a fit-for-purpose solution that will raise your organization or community to a new standard of excellence. What you can expect from APTIM: Work that is worthy of your time and talent Respect and flexibility to live a full life at work and at home Dogged determination to deliver for our clients and communities A voice in making our company better Investment into your personal and professional development As of the date of this posting, a good faith estimate of the current pay range for this position is $25- $28 per hour. Compensation depends on several factors including: experience, education, key skills, geographic location of the position, client requirements, external market competitiveness, and internal equity among other employees within APTIM. Employee Benefits APTIM Corp is committed to providing an extensive range of benefits that protect and promote the health and financial well-being of our employees and their families through the APTIM Benefits Marketplace ************************************ Medical, vision, and dental insurance: Through the marketplace, our employees can choose benefits from five metallic levels and 10+ carriers to find the right benefits that work for them in their location. Life insurance Short-term and long-term disability insurance Paid holidays, vacation, and sick leave (eligibility based on company policy and applicable law) 401(k) APTIM offers three 401k plans through the Aon Pooled Employer Plan (PEP). The specific plan you are eligible for depends on the business unit you are in. The details of the largest plan are found here: APTIM 2025 401(k) Plan Features (makeityoursource.com) APTIM - Helpful Documents #LI-ONSITE #LI-BN1

Job Description Industrial Electrician (Levels 1-3) Facility: Heavy Industrial Coke Battery Schedule: 12-Hour Rotating Swing Shift (ABCD Crew Rotation) Job Type: Full-Time | Onsite About the Opportunity This opportunity is within a 24/7 heavy industrial coke battery facility supporting blast furnace steel production. This is a gritty, legacy industrial environment - not a clean manufacturing or automotive plant. This role is ideal for electricians with strong controls logic experience who are comfortable working in harsh, high-heat environments and troubleshooting live industrial systems. Schedule • 12-hour rotating swing shift • Day Shift: 6:30 AM - 7:00 PM • Night Shift: 6:30 PM - 7:00 AM • 4-week rotation (work 14 days out of 28) • Crews rotate together (ABCD schedule) • All employees start on day shift for training • Must be available for on-call rotation Pay • Level 1: $36.15 - $38.83/hr • Level 2: Up to $44.00/hr • Level 3: Up to $49.69/hr What You'll Do • Troubleshoot, maintain, and repair industrial electrical systems in a continuous-process environment • Diagnose and resolve issues related to controls logic, PLCs, and process automation • Work with Allen-Bradley PLCs, Automacs, and DCS systems • Support and maintain transmitters, control loops, and process control logic • Perform electrical work on motors, MCCs, drives, and industrial power distribution • Read and interpret electrical prints, loop diagrams, and control schematics • Respond to equipment failures in high-heat, high-risk environments • Follow strict lockout/tagout and safety procedures at all times • Collaborate with operations and maintenance teams to minimize downtime What You Bring • Controls logic experience (primary separator for this role) • Experience with PLCs, DCS, and industrial control systems • Strong troubleshooting skills in heavy industrial environments • Comfort working around high heat, open flame, and live processes • Strong safety mindset and situational awareness Required Qualifications • High school diploma or GED • Valid driver's license • Authorized to work in the U.S. (no sponsorship available) • Ability to pass drug screen and background check • Strong safety record Work Environment & Physical Requirements • High-heat industrial setting with hot surfaces and open flame areas • Continuous exposure to dust, fumes, Coke Oven Gas (COG), and airborne particulates • Loud noise levels requiring hearing protection • Outdoor work in all weather conditions • Work at heights, on uneven surfaces, and in confined spaces Mandatory PPE Includes: • Fire-retardant clothing • Respirators and SCBA as required • Fall protection systems (harness/lifeline) Respirator compliance is mandatory: • Clean-shaven policy enforced (mustaches above the lip permitted) Universal Benefits • Medical, dental, vision, and prescription coverage starting Day 1 • $2,500 sign-on bonus at hire • Additional $2,500 after 1,040 hours worked • Quarterly performance bonuses (up to $7,500 annually) • 401(k) with employer match • $2.50/hr pension contribution • Company-provided uniforms • Annual work boot allowance (issued every October) • Vacation accrual during Year 1 • Additional vacation week beginning in Year 3 Interview Process • Resume review • Teams phone screen with live print review • Onsite written and hands-on control room test • No Monday or Friday interviews Want to Stand Out? We invite candidates to record a short video to showcase who they are. This should feel low-pressure and personal. Video submission link: ***********************************************

Are you looking for an exciting career providing thrills to people from all over the world? Cedar Point is looking for qualified Electrical Controls Technicians. As an Electrical Controls Technician, you would be responsible for diagnostics, repairs, and maintaining Cedar Point's controls systems. Working as a team, the systems are maintained to a high standard. This is done utilizing digital multi-meters, PLC ladder logic, electrical, hydraulic, and pneumatic schematics, and other types of diagnostic software and tools. Must have a working knowledge of Allen Bradley controls to include DC and AC drives and a multitude of PLCs from the tried-and-true PLC5 to the latest and greatest ControlLogix. The brands of drives and PLCs are not limited to Allen Bradley. Responsibilities: Install and repair electrical systems. Calibrate equipment, design, inspect, and troubleshoot wiring, panels, glitches, and other malfunctions. Diagnose and repair DC drive controllers and DC motors. Must know how to use amp probe, digital volt meter, oscilloscope and other test equipment. Diagnose PLC (SLC500, PLC5, NUMA LOGIC, ControlLogix 5000, CompactLogix) and relay logic electrical problems. Working knowledge of Allen Bradley, Icom software programs, hydraulic and pneumatic systems desirable. Familiar with AutoCad and capable of drawing schematics. Standard control system wiring practices and control sensing devices such as proximity sensors, photo eyes, etc. Other duties may be assigned. #LI-UW1 Qualifications: Must join electrical union. Associate degree in industrial or robotic control systems preferred. High degree of computer literacy preferred. Maintenance journeyman (Class A) preferred. Minimum of 3-5 years of industrial control system experience preferred. High school graduate/GED preferred. Driver's License Ability to work nights, weekends and holiday periods to meet business needs. Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law. Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law.

Electrician Job Accountabilities is for 1st Shift - 7:00a - 3:00p . Employee will work 8 hours shifts, Monday through Friday, with weekend work for inspections, preventative maintenance, projects etc. Electricians are paid a base rate of $33.44/hour. Must be able to work overtime if necessary. The Maintenance Electrician maintains and enhances the electrical infrastructure of our coil coating factory in Toledo, Ohio. The position will perform preventative and corrective repairs, interpret blueprints, troubleshoot issues, uphold safety standards and keep detailed documentation. This is a hands-on position that will be required to support a variety of duties and responsibilities in this continuous operation. Duties And Responsibilities: Perform preventive and corrective maintenance on electrical systems for production machinery, conveyors, motors, and control panels. Diagnose and repair electrical issues on automated equipment, including PLCs, VFDs, and motor control circuits. Install and maintain wiring, conduit, circuit breakers, transformers, and other electrical components in compliance with NEC and OSHA standards. Read and interpret electrical schematics, blueprints, and equipment manuals to plan and execute repairs. Test electrical systems using meters and diagnostic tools to ensure proper functionality and safety. Collaborate with maintenance and production teams to minimize downtime and improve equipment reliability. Maintain accurate records of maintenance activities and report findings to supervisors. Respond to emergency breakdowns and support continuous production operations. Ability to work safely in a fast-paced manufacturing environment and comply with OSHA and NFPA 70E standards. Performs other job-related duties as required or assigned Qualifications: In addition to the specific responsibilities listed above, the ideal candidate will possess the following: High school diploma or equivalent; technical certification or completion of electrician apprenticeship preferred. Minimum 3-5 years of experience as an industrial or manufacturing electrician. Strong knowledge of electrical systems, motor controls, PLC troubleshooting, and industrial automation. Familiarity with CMMS (Computerized Maintenance Management Systems) for scheduling and documentation. Good analytical and problem-solving skills Fully comply with all company and plant safety practices and policies Must have experienced skills in troubleshooting, repair, overhaul, and operation of high speed production machinery. Ability to perform math functions and comprehend complex verbal and written instructions Pass pre-employment testing, (drug test, background check, mechanical aptitude testing) Offer competitive wages and a comprehensive benefits package that includes valuable health care, income protection and retirement benefits, as well as paid time off. Possible equivalent Military Job Titles: Building Electrician; Construction Electrician; Power Plant Electrician; Precision Instrument and Equipment Repairer; Ship Electrician; Communications Equipment Operator; Avionics Technician. Electronics Technician.

We have 1st shit machine tool electrician openings available for long-term work. Pay is weekly and competitive and benefits include paid holidays and healthcare insurance. Responsibilities: Print reading(blueprints), Robot Controller Wiring, Panels/Robot/Boxes, Cable Trays, Running Conduit, and layout of any other necessary electrical systems. We are seeking a minimum of 5 years of machine tool experience.

ESSENTIAL JOB FUNCTIONS: * Installs, maintains, calibrates, adjusts, trouble-shoots, and repairs treatment plant instrumentation, telemetering, and electrical systems and filing system (including, but not limited to, electric motors, variable frequency drives, switches, gauges, solenoids, relays, control panels and motor control centers, flow meters, transmitters, transducers, level control systems, programmable logic controllers). * Conducts electric and electronic tests, installs conduit and wire, and controls and services same as needed * Set up, stocks, and keeps readiness, an electrical, electronic, and instrumentation repair shop and uses specialized electric and electronic tools and diagnostic equipment. * Works with Operators, Maintenance Specialists, and other WRRF staff on a variety of plant equipment and facilities as needed. * Installs electrical equipment and systems such as light fixtures, transformers, high voltage switches, circuits, electrical panels, power distribution, any necessary wiring, and laying conduit. * Performs preventative maintenance and repairs on circuits, motors, electrical switches, heaters, appliances, transformers, sampling equipment, and power distribution. * Performs routine inspections of electrical systems, wiring, components, and accessories throughout the facility. * Reads blueprints, sketches, and layouts; provides recommendations for replacing/upgrading electrical/electronic equipment as necessary. * Cleans up work sites after completion of jobs; keeps work areas, repair shop, and stock room organized and clean * Additional duties as assigned. MINIMUM OUALIFICATIONS: * Possess a journeyman's card in the electrical trade or electrical license from the State of Ohio. OR Graduated from an accredited college with an Associate's Degree in Electronic/Electrical Engineering Technology, Industrial Electronics, Automation Electronics, or a closely related field AND have four (4) years of documented work experience in the electrical and instrumentation field; * Have a minimum of two (2) years of experience in installing, repairing, calibrating, and trouble-shooting electronic instrumentation to include, but not limited to, programmable logic controllers, variable frequency drives, control panels, motor control centers (MCCCs), and other process control devices; as well as experience in the installation of conduit and wire, and use of diagnostic equipment. * Possess a Class 1 Wastewater Operator Certification, or ability to obtain in two (2) years. * Valid driver's license with driving privileges in the State of Ohio. KNOWLEDGE, SKILLS, AND ABILITIES: * Knowledge of current electrical practices, electrical codes, electrical safety and equipment * Knowledge of wastewater treatment facilities and functions * Knowledge and skills to recognize need for repairs and to repair electrical equipment * Knowledge of control and relay logic * Ability to use a computer with database management system * Ability to read blue prints * Ability to apply principles and instructions to solve common problems * Ability to troubleshoot electrical circuits and programmable logic controllers, relay logic programming, va1iable speed drives * Ability to work independently, multi-task, and prioritize work duties * Ability to develop and maintain accurate records and inventories, and provide written reports and summanes * Ability to communicate effectively and work well with others * Ability to work in a group or alone UNUSUAL WORKING CONDITIONS: * Exposure to cold and/or wet weather * Exposure to varied and unusual odors

Are you a skilled craftsman with electrical experience and a passion for helping others? Are you ready to join a dynamic team that values innovation, expertise, and attention to detail? Look no further! We are currently seeking an experienced person to join our team at Kern Liebers USA in our Maintenance department. The Maintenance position plays a crucial role in our production process utilizing your expert knowledge and hands-on skills to maintain, repair, and/or rebuild complex machinery and equipment including trouble shooting and problem solving of electronic & mechanical systems. If you thrive in a challenging environment and possess exceptional problem-solving abilities, we invite you to apply for this exciting opportunity. Join us and become an integral part of our dedicated team, where your knowledge will contribute to the creation of high-quality products that make a difference. Duties Include Planning, fabrication and installation of new wiring for fixtures, equipment, and building systems. Electrical knowledge is a must, will rewire machines. Perform preventative maintenance per work orders. Diagnose problems and develop/implement solutions. Order supplies, discuss scheduling and work order administration with Production Manager. Requirements Must have at least two years of manufacturing electrical experience High school degree or equivalent required. Journeyman's Card required. Have completed a D.O.L. certified apprentice program in an appropriate field, plus (4) four years experience in industrial maintenance operations after apprenticeship or appropriate vocational training Industrial experience with eight (8) years performing industrial maintenance functions. Must possess basic computer skills. Must be able to work independently with written or verbal instructions. Compliance with all Safety, TS 16949, and ISO 9000 requirements. Working knowledge of 5S. Ability to work in a fast-paced environment. Ability to operate overhead hoist and any other equipment necessary to perform duties. Able to operate a forklift and pallet jack. Must be able to lift up to 50 lbs occasionally. Must be able to stand, walk, and bend for most of the shift. Some climbing, crawling, and/or kneeling may be required. Valid driver's license needed. Benefits This position pays up to $35.00/hour. This rate includes an additional 8% weekly incentive & 3% attendance incentive each week. This is a 1st shift, union position. We offer a competitive compensation and benefits package. Within our benefits package: affordable medical insurance, dental insurance, vision insurance, life insurance, long- and short-term disability (at no cost to you), 401k with company match, and paid vacation.