Maintenance manager jobs in Toledo, OH - 116 jobs

We're proud of our Tier 1 supplier legacy for manufacturing propulsion-agnostic, structural automotive components, and assemblies around the globe. To help us drive excellence, you'll get to: Provide key input into the development of departmental strategic goals along with identifying key measurable to support the department goals. Responsible for maintenance department safety, quality, production, and delivery objectives in the area of responsibility Maintain and repair equipment to support production jobs Manage the preventative maintenance schedules Utilize QMS to create and close PM's Maintain maximum levels of machine utilization and efficiency Provide leadership necessary to achieve and maintain a continuous improvement mind set for the team Provide leadership and promote positive moral and ensure a total team concept. Responsible for performance feedback and leadership of all direct reports including mentoring, coaching, counseling, and corrective action when situations dictate. Coordinate and assess training and team building This full-time, salary role is a part of our Maintenance team and reports to the Maintenance Manager. Required experience: Bachelors Degree in Applied Science in Manufacturing, Engineering or Industrial Technology preferred Minimum of six (6) years as a maintenance supervisor preferred, and one (1) year of management experience. Automotive experience required

This position is responsible for the safety, quality, and efficiency of hourly employees' work during the execution of electrical preventative and reactive maintenance. Health, Safety and Environmental (HSE): Maintain 100% compliance with and fully support refinery HSE policies, procedures, guidelines and initiatives Serve as a safety leader within the Refinery by setting the example for safety in the field Address/communicate observed unsafe conditions immediately Instill the expectation to identify and eliminate hazards associated with daily work activity and enforce the use of safe work procedures and practices Consider potential HSE impacts when completing maintenance work scope. Participate in weekly safety meetings and monthly safety audits for assigned production area. Daily Support (Tactical responsibilities): Communicate electrical equipment maintenance resource availability updates to AMCs at the start of each shift when it impacts multi-craft work and schedule or as requested by ABT. Obtain the latest equipment readiness status and receive adjusted work front and revised daily work schedule from AMCs Assure that resources such as: materials, tools and equipment are available to personnel to allow for completion of assigned work Perform minimum of two daily field audits (one morning, one afternoon) for all scheduled jobs and document delays and deviations of scheduled work. Communicate and address issues that threaten daily schedule as they occur Identify and effectively communicate performance expectations to electrical equipment personnel Supervise installation, troubleshooting, and repairing of electrical equipment, and replacing defective electrical or mechanical parts Provide technical assistance, direction, and supervision to Electrical Equipment Mechanics to meet day-to-day maintenance requirements of the plant Provide feedback, coaching, and mentoring on all aspects of the Electrical Equipment Technicians job performance and development Support and provide feedback with the Planners, Schedulers, and Area Maintenance Coordinators to maximize the value of the planning and scheduling process. Handle all administrative, labor relations and personnel issues in a timely manner. Respond to plant emergencies and be available after hours during critical situations Perform on call duties Work to overcome and eliminate barriers to effective field execution including coordinating unplanned craft work steps Long-term Support & Leadership (Strategic responsibilities): Champion/participate in initiatives to improve the Maintenance process as assigned Supervisory & Leadership: Conduct business in a team environment interacting closely with peers and cross craft supervision Clearly set and drive expectations of hourly staff and communicate concerns or issues with Maintenance Execution Superintendent Maintain effective communications and coordinate day-to-day or job-to-job tasks and readiness with other Maintenance Supervisors Communication Responsibilities Maintain effective lines of communication across the refinery including the Inspection group, Maintenance, Operations, Process Engineering, etc. Coordinate and communicate issues and daily progress with schedule Attend daily schedule update meetings when required Report job status and next day resource needs including equipment, support crafts, and contractor needs Coordinate other groups/crafts and contractors as required Ability to communicate and report at a high level to Upper Management Actively participate in corporate Best Practice Teams and TRC initiative teams, as assigned ABT Responsibilities Work with Area Business Team (ABT), Engineering, and Electrical Planner to ensure safe, quality, and efficient Maintenance Electrical equipment execution Turnaround Responsibilities Provide Electrical equipment expert support to turnaround planning and execution for assigned unit(s). Capital Projects Responsibilities Provide Electrical equipment expert support to ensure capital project success at proposal stage and after funds have been allocated. Reporting & Documentation Provide input and complete assigned Electrical Equipment Maintenance Execution reports; maintain neat and orderly Electrical Equipment Maintenance Execution files for the refinery (paper and electronic). Job Qualifications: Bachelor's degree in engineering discipline plus 4 years of experience working in electrical maintenance environment in leu of engineering degree must possess 8 years of experience working in electrical maintenance environment. 3+ years' supervisory or process management experience required, preferably in a union environment. Preference given to individuals with experience in a refinery/petrol chemical environment. Strong written and verbal communication skills required. Hard trade experience/certification is preferred. Proficiency with Microsoft office suite required. SAP experience preferred. Must be able to respond to 24/7 call ins, work rotating shifts including holidays, weekends, and meet all scheduling requirements. We thank all respondents for their interest in PBF Holding Company LLC (“PBF Energy”), however, only those selected for an interview will be contacted. Please no phone calls or emails to any employee of PBF Energy about this requisition. Placement agencies or recruiters need not respond. All resumes submitted by search firms to any employee of PBF Energy via email, the Internet or in any method without a valid written search agreement will be deemed the sole property of PBF Energy. No fee will be paid in the event the candidate is hired by PBF Energy as a result of the referral or through other means. PBF Energy is an equal opportunity employer. We are committed to creating a diverse, inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religious creed, sex, gender, gender identity or expression, sexual orientation, reproductive health decision making, national origin, ancestry, genetic information, physical or mental disability, medical condition, marital status, age, veteran and military status, or any other status protected by applicable law. We are committed to providing reasonable accommodations as required by law. #LI-KW 1

Prestige Staffing Services is seeking an experienced Maintenance Manager for a direct hire opportunity with outstanding pay and benefits in the Findlay, Ohio area. Primary Responsibilities Oversee maintenance department Manage timelines, set schedules, monitor progress Establish and maintain preventative and predictive maintenance program Coordinate building space allocation and layout and facility expansion Ensure compliance with legal, regulatory, audit, safety, and environmental issues by conducting on site assessments Lead construction and growth projects. Evaluate, develop, implement, and manage process improvements that support business goals Maintain positive vendor relationships Qualifications 5+ years of Maintenance Management in a manufacturing setting "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"255186069","FontFamily":"PuviRegular","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"City","uitype":1,"value":"Findlay"},{"field Label":"State\/Province","uitype":1,"value":"Ohio"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"45839"}],"header Name":"Maintenance Manager \- Direct Hire","widget Id":"347772000000072311","is JobBoard":"false","user Id":"347772000000104003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":false,"job Id":"347772000013933034","FontSize":"15","google IndexUrl":"https:\/\/prestigestaffingservices.zohorecruit.com\/recruit\/ViewJob.na?digest=tehb Mfv.RuWjDkp86.e2RPxoPGcEqai9PJ9Subjua5U\-&embedsource=Google","location":"Findlay","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"n7dt96037a531f5d84cb1a6f69394fde98ccd"}

Full-time Description Come Join the Toledo Tool & Die Team! Located close to the Michigan/Ohio border, Toledo Tool and Die has diligently served the people of both of those great states since 1940. It was a company founded on one simple principle: to do the finest work possible for our clients and to deliver on every promise we make. Today Toledo Tool & Die has three facilities in the Toledo area and one in Pioneer, Ohio. Toledo Tool & Die is adding a Maintenance Manager to our team to support our continued growth. This is a full-time position based in Maumee, Ohio. We offer competitive wages, growth opportunities, and a clean, safe work environment. WHAT Toledo Tool & Die CAN OFFER YOU: Competitive pay Weekly pay PTO 10 Paid holidays Full Benefits WHAT MAKES YOU A GREAT FIT FOR THIS POSITION: Strong work ethic Positive attitude Consistent attendance Willingness to learn Safety minded POSITION SUMMARY: The Maintenance Manager is responsible for the reliability, availability, and safe operation of all production equipment at the Maumee facility, including tandem press lines, progressive presses, transfer presses, welding cells, and assembly automation. This role leads the maintenance and controls teams, establishes preventive and predictive maintenance systems, and supports equipment commissioning and ramp-up. This position requires a strong working knowledge of PLC-based systems to effectively lead troubleshooting and interface with controls resources; however, hands-on PLC programming is not required. ESSENTIAL JOB FUNCTIONS: Own uptime, reliability, and safe operation of stamping and assembly equipment including tandem press lines, progressive presses, and transfer presses Lead troubleshooting of mechanical, electrical, hydraulic, pneumatic, and automation-related downtime Support commissioning of new equipment including 2,500T coil-fed and 3,500T blank-fed transfer presses Establish and sustain PM and PdM systems with >95% PM compliance Develop spare parts strategies and manage maintenance planning Provide leadership for PLC-controlled equipment and automation systems Interpret PLC alarms, fault codes, and HMI diagnostics Lead maintenance and controls teams with a strong safety-first culture Partner with Operations, Engineering, and CI teams to support production and downtime reduction Requirements 7+ years industrial maintenance experience required 3+ years maintenance leadership experience required Automotive or heavy industrial manufacturing background Stamping experience including tandem lines Strong electrical and mechanical troubleshooting skills High-level working knowledge of PLC-controlled equipment Qualifications - Preferred Familiarity with Allen-Bradley PLC platforms Exposure to Siemens PLC systems Transfer press commissioning experience Robotics and automation experience Plex Maintenance module experience a plus

Job description - Maintenance Manager Scope and purpose: the purpose of this document is to give a comprehensive listing of the duties and responsibilities associated with the maintenance manager position. This document establishes the level of education, experience and training required to carry out the assignments required for this position. Position/title: Maintenance Manager Department: Maintenance Reports to: Maintenance Director, Plant Manager and General Manager Principal purpose of job: · Adhere to and administer all company policies regarding attendance. Including: approving employee hours, approving overtime as needed, approving time off/vacations and issuing disciplinary actions as required. · Adhere to and administer all company policies regarding conduct and safety. Including: ensuring all safety equipment is in good working order and available for employee use as needed. · Assign personnel to perform the company's preventative/predictive maintenance program. Including: daily, weekly, monthly, quarterly and semi-annual inspections. Verify that these tasks are completed in a timely fashion and records are kept in accordance with the company's quality policy. · Prioritize and assign the requests for maintenance “QF810”, verify their completion and keep the records in accordance with the company's quality policy. · Monitor our stock of critical parts, consumables and supplies. Order replacements when stocks are getting low. · Monitor the stock of scrap stainless steel and other valuable scrap materials. Notify the maintenance director when the need for a scrap pick up is required. · Keep the MSDS book up to date. Add any new materials to it in a timely fashion. Remove any MSDS sheets from the book when the materials are no longer in our facility. · Coordinate with the maintenance director for any special projects that arise. To assure procurement of materials and manpower needs. · Assure the proper use of the company's lock out/tag out, confined space and hazard communication plans and to keep records in accordance with the company's quality policy. Additional duties/responsibilities: · Must have knowledge of the proper use of all hand tools. · Must be able to read and utilize blueprints and electrical diagrams for trouble shooting purposes. · Must gain or possess an understanding of our equipment. including: combustion systems, temperature controllers, drive systems, and HMI interface to utilize the equipment. · Must have experience in pipe fitting, welding, grinding and fabrication. · Must be able to communicate effectively in all aspects of their duties. · Oversee and assist in the repairs of the company's equipment. Qualifications: 1. A minimum of 10 years in the maintenance field. 2. A minimum of 2 years in a supervisory position. Physical demands: while performing the duties of this job, the employee is regularly required to handle/feel, reach, stand, walk, climb, stoop and kneel. The employee must regularly lift or move parts and supplies using a forklift or hoist.

Assist maintenance team with technical support and leadership using regular on floor review and assistance. Authorized to lead department in daily work to assure that work is properly prioritized and efficiently executed as emergency conditions are encountered. Maintain and improve as required a Preventative Maintenance Program using computer software to list required maintenance by machine, schedule frequency of maintenance, and track history of work completed. Identify and enter new machine maintenance schedules as required. Utilize Work Order system to establish and direct all repair priorities and maintain maintenance history of work completed on each machine. Assures that all new equipment is set up and inspected and in compliance with all safety requirements and correct point of operation safeguarding. Review quality of service and upgrade where needed for work performed by department. Advise and coordinate maintenance activities with management team. Participate in AQP, Steering Committee, and Apprenticeship Committee as required. Review Apprenticeship Program requirements and conduct reviews of apprentice's performance. Assess department needs in manpower, required skills, training required for new technology, and any other resources required to support overall maintenance efforts. Authorized to initiate actions to prevent the occurrence of any non-conformities relating to product, processes and quality systems. Develop work plan for maintenance department during any shut down periods including special projects and support of any Kaizen activities. Evaluate and make ready all utilities and services needed for any new presses, welders, or other assembly equipment. Provide maintenance support for all production continuous improvement activities as well as developing proposals to increase the efficiency of the maintenance department. Initiate, review and approve purchase requisitions for parts and equipment utilizing sound purchasing practices for maintenance supplies. Perform other essential functions as assigned. Authorized to maintain maintenance's inventory of spare and replacement parts. Legal Requirements as they apply to the EMS Program JOB QUALIFICATION REQUIREMENTS: Two year Technical Degree or equivalent and 5 - 8 years automotive stamping experience including press maintenance with tier one or tier two supplier

MAINTENANCE MANAGER TH Plastics, Inc., is a custom injection molder serving the appliance and automotive industries, is seeking an experienced and highly motivated individual for the following position in our Bowling Green, Ohio Molding Division. JOB OVERVIEW: Responsible for overseeing tooling and equipment maintenance of the facility. BENEFITS: Paid Time Off 401K 401K Matching Medical, Dental and Vision Insurance Life Insurance Disability Insurance Climate controlled production floor JOB REQUIREMENTS: Bachelor's degree in related field or equivalent years of experience 8 to 10 years plant/general management experience in a manufacturing environment Computer skills Excellent written and verbal communication skills Strong analytical and problem-solving skills Regular on-site attendance PRIMARY DUTIES AND RESPONSIBILITIES: (The following list does not include all duties and responsibilities) Plan and oversee all repair and installation activities Provide support to troubleshoot and solve issues Ensure all maintenance and tooling objectives are completed on time and within budget Work towards root cause solutions to reduce downtime and improve quality Coordinate with management, customers, production and tooling suppliers to schedule/perform all in house and outsourced tooling maintenance and repairs Maintain tooling uptime to minimize impact on the customer Work with other groups involved in manufacturing toward continuous improvement objectives set forth by management Ensures the facilities equipment and machines are maintained properly and working correctly Procures materials, supplies, and repair parts to maintain inventory as required Track record PM's and work orders Coordinate work performed by outside contractors All other related duties as assigned

Job DescriptionBenefits/Perks Competitive wages Thorough training on proper cleaning and disinfecting Career Growth Opportunities Fun and Energetic Environment Ongoing training Job Summary We are looking for a professional Hotel Maintenance Manager to join our team. You will be responsible for taking care of our hotels infrastructure as well as managing maintenance personnel and planning renovation and repair projects. As the Hotel Maintenance Manager, you should have experience with electrical, plumbing, and HVAC systems. You must be organized and committed to meeting health and safety standards at all times. Your primary goal is to ensure our hotel is safe and functional for guests and employees. Responsibilities Inspect hotel regularly to ensure it meets safety standards Arrange for routine maintenance in hotel rooms and public areas Undertake repair and maintenance projects without disturbing guests Supervise a team of maintenance technicians Update operational procedures and process manuals, as necessary Communicate all problems and resolve them or make recommendations to upper management for resolution Manage relationships with contractors and service providers Maintain budgets, expenses and activity logs Qualifications Bachelors Degree, Associate Degree or certificate of completion from a trade school preferred; or commensurate education and experience accepted Supervisory maintenance or construction management experience preferred Ability to quickly diagnose the root cause of failures and suggest appropriate solutions In-depth knowledge of health and safety regulations Demonstrated ability to communicate effectively in person, via phone, and in writing with the site staff and internal partners, external vendors, and groups of residents

Founded over 35 years ago, First Quality is a family-owned company that has grown from a small business in McElhattan, Pennsylvania into a group of companies, employing over 5,000 team members, while maintaining our family values and entrepreneurial spirit. With corporate offices in New York and Pennsylvania and 8 manufacturing campuses across the U.S. and Canada, the companies within the First Quality group produce high-quality personal care and household products for large retailers and healthcare organizations. Our personal care and household product portfolio includes baby diapers, wipes, feminine pads, paper towels, bath tissue, adult incontinence products, laundry detergents, fabric finishers, and dishwash solutions. In addition, we manufacture certain raw materials and components used in the manufacturing of these products, including flexible print and packaging solutions. Guided by our values of humility, unity, and integrity, we leverage advanced technology and innovation to drive growth and create new opportunities. At First Quality, you'll find a collaborative environment focused on continuous learning, professional development, and our mission to Make Things Better . We are seeking a Maintenance Manager for our First Quality Tissue facility located in Defiance, OH. This position will be responsible for the overall maintenance of the Paper Machines. Ensures all team members goals are aligned with department objectives and flow resources as needed to ensure the goals are met. Provide consistency in work processes, training, employee development, and HR practices. Ensure a strong relationship with the Production team and coordinate activities to ensure reliable processes from incoming pulp to final product. As a member of the mill leadership team, develop and implement practices and initiatives to keep the mill competitive. This position is responsible for leading the maintenance processes in a manner that will have direct impact on profitability, efficiency, cost management, quality, safety, customer satisfaction, and innovation. Principal Accountabilities/ Responsibilities: Leads and develops safe work culture through adhering to and maintaining all company safety rules, policies, and standards. Exhibit strong core leadership skills - accountability, credibility, trust. Ensure coaching, discipline, recognition, and handling of situations is consistent with HR policy. Develop salaried and hourly maintenance personnel to ensure bench strength. Conduct performance appraisals, performance improvement and coaching of both salaried and hourly personnel. Utilize and promote the usage of the CMMS system to provide direction and assistance to maintenance personnel within the Paper Maintenance team. Promote growth of maintenance team by providing leadership in the development and implementation of: Root Cause Analysis Precision maintenance techniques Preventive maintenance programs Reliability improvements Analyze operational data and equipment performance history to deliver improvements in critical maintenance related metrics including unplanned downtime, PM compliance, schedule compliance, Mean-Time-Between Failures, and maintenance related costs. Champion the availability and reliability of our assets using the following: Effective predictive maintenance Effective maintenance planning and scheduling Effective repair techniques Champion vendor services to maximize quality, performance, and reliability of equipment repairs. Utilize vendors and OEM's for improving the skills of maintenance personnel and for improving inspection routines. Manage Controls and Mechanical Engineers to improve equipment availability. Support all mill Reliability efforts Develop and create a vision for the maintenance team and implement it. Interface with Production, Engineering, Human Resources, Purchasing, Stores, and Utilities departments. Develop and maintain staffing plans to meet business requirements. Develop and deliver maintenance budgets. First 6 months, training primarily in Anderson, South Carolina Education and experience requirements: Bachelor's degree in Mechanical or Electrical Engineering, or a related field. In lieu of a degree, additional years of experience may be considered. 10 years' experience in the maintenance field, experience in Paper Machine preferred Three to five years' experience in a Maintenance Supervisory position. Have a deep understanding of the planning and scheduling of maintenance work functions as they apply to predictive, preventive, precision, proactive, and planned maintenance. Strong human relations and interpersonal skills. Strong problem-solving skills in aiding the reliability of the operation. What We Offer You We believe that by continuously improving the quality of our benefits, we can help to raise the quality of life for our team members and their families. At First Quality you will receive: Competitive base salary and bonus opportunities Paid time off (three-week minimum) Medical, dental and vision starting day one 401(k) with employer match Paid parental leave Child and family care assistance (dependent care FSA with employer match up to $2500) Bundle of joy benefit (years' worth of free diapers to all team members with a new baby) Tuition assistance Wellness program with savings of up to $4,000 per year on insurance premiums ...and more! First Quality is committed to protecting information under the care of First Quality Enterprises commensurate with leading industry standards and applicable regulations. As such, First Quality provides at least annual training regarding data privacy and security to employees who, as a result of their role specifications, may come in to contact with sensitive data. First Quality is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identification, or protected Veteran status.

The Levy Group of Companies is seeking a Maintenance Manager to work at our Fulton Mill Services location in Delta, OH. The Maintenance Manager Responsible for managing the maintenance program for mobile equipment, plants, and facilities Benefits Competitive benefits package including Medical, Dental, Prescription, 401(K) with 3% Employer Contribution, Long- and Short-term Disability Tuition Reimbursement for qualified skilled trade programs Student Loan Repayment Program Employee Referral Program Responsibilities The Maintenance Manager: Supports safety and environmental initiatives including employee safety engagement, regulatory compliance and related training Develops, trains and facilitates a team of equipment and plant maintenance personnel Coordinates teams to identify process improvements and to develop and document maintenance procedures Ensures compliance with the preventive maintenance program Cultivates relationships with steel mill personnel, vendors and other management personnel Develops maintenance systems and processes Develops and monitors the Maintenance Department's budget and business plan Responsible for developing, assessing and meeting KPIs Runs KPI reports, analyzes data and utilizes information for better decision-making Acts as project manager for significant repair, rebuild or installation activities Evaluates feasibility of capital expenditures Audits processes and inspects work as necessary Provides reporting and recordkeeping as required Performs other duties and projects as assigned by manager Skills The ideal candidate will have: Some college or degree preferred Minimum of ten years of maintenance experience in industrial or construction environment Knowledge of applicable safety and environmental regulations and ability to implement related programs and controls Ability to train, support and coordinate maintenance personnel Ability to understand and use financial data for decision making Management experience Computer experience with knowledge of Microsoft Office products Valid driver's license To Apply Please submit your resume. Military Members are welcome, and Veterans are encouraged to apply! Who is Edw. C. Levy? We are a unique, 100-year-old family-owned company that transforms our recycled products into construction materials, lightweight aggregates, asphalt, cement, concrete, agricultural products, and more. We provide steel mill services, flame cutting and treatment, road building, logistics, laboratory testing, and a variety of other solutions for our customers. The Levy Group of Companies is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, veteran status or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. The Levy Group of Companies makes hiring decisions based solely on qualifications, merit, and business needs at the time.

American Rheinmetall provides full services for complex mechanical products, fabricated structures and systems that range from complete design services to prototype manufacturing, testing, production launch, full rate production and product service and sustainment. Loc provides quality products and services at affordable prices through a lean organizational structure and four facilities, three in Michigan and one in Texas, that span 910,000 square feet. The Plymouth, MI facility serves as corporate headquarters and specializes in suspension, driveline and track systems. The Lansing and Lapeer Michigan based facilities specialize in fabrications and armor product solutions. FLSA Status: Exempt Job Title: Facilities Maintenance Manager Department: Facilities Summary Coordinates and directs the design, planning, construction, maintenance, and alteration of equipment, machinery, buildings, grounds and other facilities by performing the following duties personally or through subordinate supervisors. Essential Duties and Responsibilities include the following. Other duties may be assigned Maintains, negotiates and monitors all contracts for on-site services (Lawn Care, Snow Removal, etc.) Inspects plant and evaluates use of space and facilities. Analyzes and maintains firm's HVAC systems, storm water system, electrical, lighting, and other factors. Establishes and maintains inspection requirements for security systems, elevator, fire suppression, maintenance and building equipment. Maintains and repairs buildings' plumbing and electrical systems, including replacing worn or defective parts such as light bulbs, switches and fuses. Maintains building, performing minor and routine painting, plumbing, electrical wiring, and other related maintenance activities. Plans, budgets, and schedules facilities modifications including cost estimates, bid sheets, layouts, and contracts for construction. Performs audits to support facility planning. Formulates and coordinates program specifications, requirements for proposals and contracts, and associated documents. Acts as liaison to public utility, environmental, and energy agencies. Oversees the coordination of building space allocation, layout, and communication services. Oversees and directs maintenance personnel and workers engaged in equipment installation, facilities equipment repair, and preventive maintenance. Directs workers engaged in painting and performing structural repairs to masonry, woodwork, and furnishings of buildings. Directs workers engaged in ground maintenance activities, such as mowing lawns, trimming hedges, removing weeds, and raking and disposing of leaves and refuse. Directs workers engaged in the general cleaning and up keep of buildings, including buffing, dusting, sweeping, mopping, vacuuming, and washing windows. Directs workers assisting other departments as requested, including moving furniture and unloading and storing supplies. Requisitions tools, equipment, and supplies. Confers with other supervisors to coordinate activities of individual departments. Performs activities of workers supervised. Competencies To perform the job successfully, an individual will need to perform the following competencies. Problem Solving Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations. Technical Skills Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. Oral Communication Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; responds well to questions. Cost Consciousness Works within approved budget; Develops and implements cost saving measures; Conserves organizational resources. Planning/Organizing Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Develops realistic action plans. Quality Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Safety and Security Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Education and/or Experience High school diploma or general education degree (GED) and five to seven years related experience and/or training; or equivalent combination of education and experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Mathematical Skills Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills To perform this job successfully, an individual should have knowledge of Internet software; Manufacturing software and Word Processing software. Other Skills and Abilities Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. American Rheinmetall is an Equal Employment Opportunity (EEO) employer. It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information.

LyondellBasell is a leader in the global chemical industry creating solutions for everyday sustainable living. With a nearly 70-year legacy that includes a Nobel Prize in Chemistry and our proprietary MoReTec recycling technology, LYB is enabling a more sustainable future for generations to come. LYB develops high-quality and innovative products for applications ranging from sustainable transportation and food safety to clean water and quality healthcare. LYB places high priority on diversity, equity and inclusion and is Advancing Good with an emphasis on our planet, the communities where we operate and our future workforce. We're addressing the global challenges of ending plastic waste, taking climate action, and supporting a thriving society, while generating value for our customers, investors, and society.Come Join an Inclusive Team We are seeking dynamic and experienced Maintenance & Engineering Managers to join our manufacturing team. This role is critical in leading both day-to-day and developing/executing site strategy for Maintenance and Engineering functions in both reliability and production. This role is responsible for executing work in a safe, reliable, cost efficient, and environmentally responsible manner to achieve safety, production, quality, and budget goals, while fostering a culture of continuous improvement and people-first leadership. #LI-LL2A Day in the Life Lead maintenance team; set clear targets and coach through Gemba and structured feedback Deliver GoalZERO performance through strong leadership, employee/contractor involvement and management systems Provide strategic leadership to the engineering team by establishing clear, measurable objectives and fostering engineering discipline through field engagement and structured, performance-focused feedback Implement and adherence to corporate standards and assess gaps and opportunities Own and implement a Lean daily management system (tier meetings, short-interval control, problem escalation). Drive continuous improvement initiatives: 5S, TPM elements, A3 problem solving, kaizen events, root cause analysis and standard work Partner with Operations, Quality, and Supply Chain to remove constraints and improve workflow Provide overall guidance for long range programs defining strategic direction for mechanical integrity, inspections, and site development Enhance and administer a consistent system of measurement geared towards improving the effectiveness of reliability and proactive initiatives Translate reliability and availability performance into financial outcomes (understand standard cost, absorption, variance drivers) Ensure Code of Conduct and all other LyondellBasell policies are consistently followed and administered Recruit, onboard, and develop talent; ensure succession for critical roles. You Bring This Value Bachelor's degree in Engineering or a technical field required, or 4+ years of equivalent experience. Prior people leadership experience preferred Experience in polymer compounding is not required; adjacent manufacturing experience is acceptable Lean Manufacturing skills and continuous improvement experience are a plus In depth experience with SAP or similar CMMS What We Offer Benefits starting day one:• Choice of Preferred Provider or Consumer Driven Medical Plan including Prescription Drug Coverage • Dental, Vision and Employee Assistance Program • 401(k) Plan with Company Match of 6% • Retirement (Pension) Plan • Flexible Spending Accounts• Life, AD&D and LTD Insurance• Employee Stock Purchase Plan• Vacation and Holidays• Educational AssistanceCompetencies Build PartnershipsDrive InnovationGrow CapabilitiesPromote InclusionMotivational FitTechnical SkillsDeliver ResultsLearn more about our benefits: Benefits/Health & Welfare | LyondellBasell Stay Connected! Visit our LYB Website Follow us on LinkedIn and Instagram Like us on Facebook Subscribe to our YouTube channel LyondellBasell is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, disability, age, veteran status, and other legally protected characteristics. The US EEO is the Law poster is available here.LYB is committed to providing reasonable accommodations for qualified individuals with disabilities. If you need assistance or an accommodation related to LYB's recruiting process, please email us at ***************. Applicants must be at least 18 years old.LyondellBasell does not accept or retain unsolicited résumés or phone calls and/or respond to them or to any third party representing job seekers.Privacy Statement: For information regarding how LyondellBasell processes your personal data, please read our Privacy Statement. Regulatory Disclosure The compensation and reference to benefits for this role is listed on this posting in compliance with applicable law. Please note that the compensation and benefits listed below are only applicable for U.S. payroll offers. The anticipated salary range for this position is 0108,000.00 - 0162,000.00 . The selected candidate's compensation will be determined based on their skills, experience, and qualifications.

Supervisor: Family of Parishes Mission Support Director Status: Permanent, Full-time Location: St. Joseph Parish & School, Trenton, Michigan QUALIFICATIONS High school diploma or equivalent. Five years of facilities maintenance, construction, or repair experience in a commercial or industrial setting. General electrical, plumbing, mechanical and carpentry skills required. Must have a valid driver's license and completion of Virtus: Protecting God's Children training. KNOWLEDGE, SKILLS, AND ABILITIES Knowledge and Skills in: Power and hand tools used in facilities maintenance; OSHA workplace health and safety standards and procedures; use of personal computers to use automated recordkeeping tools and email; customer service practices. Ability to: Plan, organize, and coordinate work; track and plan preventative maintenance work; maintain records and reports in computerized and written formats, compliant with regulatory requirements; effectively use email and automated calendaring systems; learn and apply health and safety regulations; work independently with minimal supervision; understand and follow oral and written directions; communicate effectively; optimize efficiencies provided by automated maintenance management and service request tools; establish and maintain cooperative working relationships. WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS Work is performed both indoors and outdoors at the church, parish center, and school with exposure to various weather conditions. The job may require weekend and holiday work. Position involves frequent bending, standing, kneeling, climbing ladders, reaching below and above shoulders, and lifting objects weighing up to 50 lbs. while performing job duties. RESPONSIBILITIES Work closely with the principal at the school to ensure everything in the school is clean and in working order. Work closely with every department at both the parish and school to assist with day-to-day maintenance and cleaning of the buildings and grounds. Assist with the daily cleaning of classrooms, hallways, lobbies, lunchroom and dining areas. Set-up and take down of social halls for events as required. Make rounds of buildings and grounds at regular intervals, inspect doors, windows and locks. Service and repair building floors, walls, ceilings, roof, doors, locks, plumbing fixtures, and lamps; both interior and exterior. Maintain grounds not maintained by lawn/snow contractors. Perform building maintenance as required, using hand tools, ladders, lift, and power tools. Install, troubleshoot, and repair all electrical equipment as needed. Maintain all HVAC equipment including boilers, rooftop units, and package systems. Provide continued preventative maintenance on all building and grounds equipment. Assist with decorating for liturgical seasons (hanging banners, wreaths, etc). Work in a safe manner, recognize unsafe situations, and take appropriate action to ensure the safety of yourself and others. Gather and dispose of rubbish and waste materials. Address all staff and parishioner concerns. Perform other duties as required by supervisor.

Maintenance Supervisor Department: Maintenance Union: AFSCME Under general supervision, supervises all maintenance and service employees in a division on an assigned shift in the maintenance, repair and cleaning of coaches, buildings and other related equipment. Duties and Responsibilities Supervises the work of maintenance employees engaged in the servicing, maintenance and repair of diesel and/or gasoline powered transportation vehicles. Subject to general direction, coordinates and schedules work on a daily basis on an assigned shift. Gives instructions relative to work orders and repair work. Communicates and coordinates with other supervisory personnel on work processes to ensure continuity. Inspects repair work during progress and upon completion. Decides upon the necessity for replacement of parts. Makes recommendations and enforces Authority safety policies. Checks records prepared by subordinates. Makes and/or monitors requests for supplies of materials and parts. Monitors records of time, materials and parts utilized and makes reports thereon. Inputs and withdraws information from the automated fleet maintenance system. Represents the Authority at first step of the grievance procedure. Maintains friendly and cooperative relations between employees and management. Performs other duties as required. Knowledge, Skills and Abilities Education equivalent to graduation from a four-year trade or vocational high school. Six years experience in repairing and maintaining diesel coaches and gasoline powered automotive equipment. Supervisory experience preferred. A valid Michigan Driver's License is required. Ability to obtain a Commercial Driver's License with proper endorsements within thirty (30) days of appointment. Considerable knowledge of the methods of planning and laying out of maintenance work. Ability to prepare reports and maintenance records. Ability to use a computer terminal. This position is safety-sensitive and is subject to random drug and alcohol testing as mandated by the Federal Transit Administration (FTA).

JOIN TEAM TRILOGY At Trilogy, you'll experience a caring, supportive community that values each team member. We prioritize meaningful relationships, genuine teamwork, and continuous growth. With the stability of long-term care, competitive pay, and exceptional benefits, Trilogy offers a work environment where you're supported, appreciated, and empowered to thrive in your career. If you're ready to join a team committed to your success, Trilogy is where you belong and thrive! POSITION OVERVIEW The Manager of Facilities Maintenance is responsible for the maintenance of the grounds, building and equipment of the health campus. Organizes, develops and directs the overall operation of the Plant Operations department in accordance with current federal, state and local standards, guidelines and regulations. Key Responsibilities * Plans, organizes, implements, evaluates, and directs the Plant Operations department, its programs and activities. * Ensures the safe operation of the building maintenance environment to promote the health, welfare, safety, and satisfaction of residents * Conducts daily rounds to proactively identify and address physical plant and resident maintenance needs. This includes checking equipment and assuring that necessary equipment is available and working properly. * Obtains and maintains material safety data sheets (MSDSs) for hazardous chemicals in the Plant Operations department. Trains all employees in all hazardous materials procedures and processes for the health campus. * Performs repairs as needed and/or appropriate on equipment, building and grounds. Ensures that the grounds, landscaping, parking areas etc., are maintained in a neat, safe and effective manner. Qualifications * High school diploma or GED/HSE preferred * 1-3 years of relevant experience preferred * HVAC experience preferred * Valid, unencumbered driver's license in the state of residence * Ability to operate a large van or bus (up to 15 passengers) safely and efficiently * Meets all state requirements for transporting residents, including proper licensing and certifications * Compliance with all state transportation regulations to ensure resident safety * For Kentucky applicants: Must complete a Department of Transportation (DOT) physical before providing transportation services LOCATION US-OH-North Baltimore Briar Hill Health Campus 600 Sterling Drive North Baltimore OH BENEFITS Our comprehensive Thrive benefits program focuses on your well-being, offering support for personal wellness, financial stability, career growth, and meaningful connections. This list includes some of the key benefits, though additional options are available. * Medical, Dental, Vision Coverage - Includes free Virtual Doctor Visits, with coverage starting in your first 30 days. * Get Paid Weekly + Quarterly Increases - Enjoy weekly pay and regular quarterly wage increases. * Spending & Retirement Accounts - HSA with company match, Dependent Care, LSA, and 401(k) with company match. * PTO + Paid Parental Leave - Paid time off and fully paid parental leave for new parents. * Inclusive Care - No-cost LGBTQIA+ support and gender-affirming care coordination. * Tuition & Student Loan Assistance - Financial support for education, certifications, and student loan repayment. TEXT A RECRUITER Andrea ************** ABOUT TRILOGY HEALTH SERVICES Since our founding in 1997, Trilogy has been dedicated to making long-term care better for our residents and more rewarding for our team members. We're proud to be recognized as one of Fortune's Best Places to Work in Aging Services, a certified Great Place to Work, and one of Glassdoor's Top 100 Best Companies to Work. At Trilogy, we embrace who you are, help you achieve your full potential, and make working hard feel fulfilling. As an equal opportunity employer, we are committed to diversity and inclusion, and we prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. NOTICE TO ALL APPLICANTS (WI, IN, OH, MI & KY): for this type of employment, state law requires a criminal record check as a condition of employment. The Manager of Facilities Maintenance is responsible for the maintenance of the grounds, building and equipment of the health campus. Organizes, develops and directs the overall operation of the Plant Operations department in accordance with current federal, state and local standards, guidelines and regulations. Key Responsibilities * Plans, organizes, implements, evaluates, and directs the Plant Operations department, its programs and activities. * Ensures the safe operation of the building maintenance environment to promote the health, welfare, safety, and satisfaction of residents * Conducts daily rounds to proactively identify and address physical plant and resident maintenance needs. This includes checking equipment and assuring that necessary equipment is available and working properly. * Obtains and maintains material safety data sheets (MSDSs) for hazardous chemicals in the Plant Operations department. Trains all employees in all hazardous materials procedures and processes for the health campus. * Performs repairs as needed and/or appropriate on equipment, building and grounds. Ensures that the grounds, landscaping, parking areas etc., are maintained in a neat, safe and effective manner. Qualifications * High school diploma or GED/HSE preferred * 1-3 years of relevant experience preferred * HVAC experience preferred * Valid, unencumbered driver's license in the state of residence * Ability to operate a large van or bus (up to 15 passengers) safely and efficiently * Meets all state requirements for transporting residents, including proper licensing and certifications * Compliance with all state transportation regulations to ensure resident safety * For Kentucky applicants: Must complete a Department of Transportation (DOT) physical before providing transportation services At Trilogy, you'll experience a caring, supportive community that values each team member. We prioritize meaningful relationships, genuine teamwork, and continuous growth. With the stability of long-term care, competitive pay, and exceptional benefits, Trilogy offers a work environment where you're supported, appreciated, and empowered to thrive in your career. If you're ready to join a team committed to your success, Trilogy is where you belong and thrive!

Title: Mgr Mechanical Maintenance HSC Department Org: HVAC-Campus Env & Phy Plnt - 108360 Employee Classification: J1 - Salaried Full Time HSC Bargaining Unit: Professional Staff Association Primary Location: HSC C Shift: 1 Start Time: 7:00am End Time: 3:30pm Posted Salary: Salary will commensurate with education and experience. Float: True Rotate: True On Call: True Travel: False Weekend/Holiday: False Job Description: Under the general supervision of the Director of Facilities Operations HSC, supports the overall mission of the institution and works to ensure a timely response to issues surrounding regulatory compliance and the completion of mechanical maintenance in a manner that promotes optimal facilities operation and performance. This position manages maintenance of all building mechanical systems (HVAC and plumbing), building automation systems and the campus centralized steam and chilled water plants. Responsibilities include management of maintenance personnel, equipment, materials, and budgets, while developing and implementing programs, policies, and procedures for the maintenance of all campus buildings to keep them in a safe, efficient, and attractive condition. Additional responsibilities include managing construction projects from conception to bidding to completion and closeout. Works as an integral team member providing support services and resolution to requirements/regulations related to building codes, Ohio Department of Health (ODH), ADA & accessibility, Joint Commission (JC), Centers for Medicare & Medicaid Services (CMS), etc. and all documentation requirements for the same. Minimum Qualifications: • Minimum of an Associate's degree or equivalent combination of education and related experience. • Must have experience in construction project management and estimating. • Must have two years supervisory experience. • Minimum five years' experience in mechanical maintenance. • Hands on experience with Joint Commission inspections of healthcare facilities preferred. • Strong working knowledge of major building Mechanical Systems including automation controls. • Strong working knowledge of centralized steam and chilled water plant systems. • Working knowledge of Structural and Electrical Systems. • Must have successfully completed 30-hour OSHA Training or complete within 6 months of hire • Understanding of life safety code and organized in keeping all documentation as required by regulatory agencies. Communication and other skills: • Project management skills including proficiency in reading and understanding blueprints. • Detail oriented with strong analytical, numerical, and reasoning skills • Excellent communication skills, verbal and written. • Must have the ability to use computers and software as it pertains to the job. Conditions of Employment: To promote the highest levels of health and well-being, the University of Toledo campuses are tobacco-free. To further this effort, the University of Toledo Health Science Campus Medical Center is requiring candidates for employment to be nicotine-free. Pre-employment health screening requirements will include cotinine (nicotine) testing, as well as drug and other required health screenings for the position. With the exception of positions within University of Toledo Main Campus and the University of Toledo College of Medicine and Life Sciences, the employment offer is conditional upon successful completion of a cotinine test and Occupational Health clearance. Equal Employment Opportunity Statement: The University of Toledo is an equal opportunity, affirmative action employer. The University of Toledo does not discriminate in employment, educational programs, or activities on the basis of race, color, religion, sex, age, ancestry, national origin, sexual orientation, gender identity and expression, military or veteran status, disability, familial status, or political affiliation. The University is dedicated to the goal of building a culturally diverse and pluralistic faculty and staff committed to teaching and working in a multicultural environment and strongly encourages applications from women, minorities, individuals with disabilities, dual-career professionals and covered veterans. The University of Toledo provides reasonable accommodation to individuals with disabilities. If you require accommodation to complete this application, or for testing or interviewing, please contact the HR Compliance at ************************ or ************ between the hours of 8:30AM and 5:00PM or apply online for an accommodation request. Computer access is available at most public libraries and at the Office of Human Resources located in the Center for Administrative Support on the Main Campus of the University of Toledo.

Job Description Hiring Immediately!!! Marquette Management Inc., *************************** is looking for a Service Manager at our location in Ann Arbor, MI. The Service Manager position plays a key role in effectively accomplishing the goal of providing residents with a clean, well maintained living environment. To accomplish this goal, the responsibilities of the maintenance department include, but are not limited to, general repairs to the apartments and common areas of the buildings and grounds, vacant apartment preparation, snow and trash removal, emergency repairs, cleaning, landscaping, ordering maintenance equipment and supplies, record keeping, accepting deliveries, moving appliances and other job related duties. Requirements The Service Manager must have previous maintenance experience, preferably in the apartment or hotel industry, as well as excellent Leadership, customer service skills and general computer knowledge. Candidate should have experience with plumbing, electrical, appliances, and apartment turns. HVAC or EPA Universal Certification is a plus! Availability for on-call purposes and the flexibility and ability to work weekends when necessary is also a plus! Marquette Management offers an Outstanding Benefit package: Exciting and challenging career for talented people seeking growth and commitment Exceptional training programs 401K + Matching Medical, Dental and Vision insurance, STD, Life Insurance Paid Time Off 13 Paid Time Off Holidays/Community Service Day/Cultural Diversity Day Starting salary $70,000-$75,000 based on experience Daily On-Call Bonus 10% Bonus based on base Salary FIVE MOST IMPORTANT JOB FUNCTIONS STAFF DEVELOPMENT/TRAINING ORGANIZATION SELF MOTIVATOR CUSTOMER SERVICE PROBLEM SOLVER SKILLS AND ABILITIES COACH TRAIN SUPPORT ABILITY TO MAKE WORK FUN ABILITY TO CHANGE ABILITY TO LEARN FROM OTHERS AND CONTRIBUTE HVAC - CERTIFIED PLUMBING ELECTRICAL 10. POOL AND SPA MAINTENANCE 11. INDUSTRY KNOWLEDGE 12. KNOWLEDGE OF BUDGETARY CONTROL If you are still interested in Marquette after viewing **************************** , text MainsuperHA to ************ make your MARQ with Marquette. Come join Marquette's environment of excitement, personal fulfillment, and unique culture! We believe in equity. We celebrate the unique backgrounds and lived experiences of our employees. We value the differences that continue to make us the most authentic versions of ourselves in our professional and personal lives. We strive to provide a safe and supportive environment where people from all walks of life can thrive, making us the best place to work, live, and invest. We want employees that will work WITH US, NOT FOR US.

The Supervisor of Ride Maintenance assists in performing and leading assigned Union crew of mechanics in monitoring, maintenance and repair of rides and attractions as assigned. Performs related duties as required. Responsibilities: Assists in performing and leading assigned crew in monitoring, maintenance and repair of rides and attractions as assigned. Performs related duties as required. Supervises subordinate crew members with the assistance of the foreperson. Supervisory duties include training, scheduling, direct instruction, assigning, reviewing and planning work, maintaining standards, coordinating activities, allocating personnel, and takes corrective action on employee issues. Timekeeping of employee schedules with in the Cedar Point timekeeping system. Reviews the work of subordinates for effectiveness and efficiency; Establishes and maintains a professional, trained, and motivated staff through effective implementation of performance and development programs. Uses effective communication to ensure all understand the expectations of the department. Utilizes company guidelines to hold those accountable when necessary. Develops and implements short/long range ride maintenance/repair plans. Assists in performing winter overhaul and year-long preventive maintenance of assigned rides/vehicles. Assists in monitoring, troubleshooting and repairing rides/vehicles during operating season. Keeps Area Manager informed of all maintenance problems/areas of concern. Assists other departments on repairs/maintenance projects as appropriate. Assists Area Manager in preparing department budget. Assists with ordering parts and materials as needed, ensuring compliance with the budgetary allocations. Assists in maintaining adequate inventory. Ensures the proper maintenance and safe operating condition of all assigned equipment. Conducts safety meetings and safety inspections of equipment. Receives and responds to inquiries, concerns and complaints from associates and guests regarding ride safety and maintenance. Hires candidates for open positions to effectively and strategically grow the assigned team. Ensures the new hire has the knowledge and resources to perform their job to the best of their ability. Qualifications: High school diploma or GED required. Vocational/technical training preferred. 1-3 years of supervisory/leadership experience. Ability to demonstrate knowledge of industrial electrical, hydraulics, and pneumatic systems. Ability to use meters, gauges, measuring devices, cutting torch, mechanic's tools, various other hand and power tools. Preferred knowledge in Microsoft Office, Maintenance Connection, UKG, and JDE. Ability to pass a mandatory (or random) drug test, per company policy, unless prohibited by state or provincial law. Ability to pass a background check, if 18 years of age or older, which may include but is not limited to, credit, criminal, DMV, previous employment, per company policy, unless prohibited by federal, state, or provincial law. Ability to work nights, weekends, and holiday periods to meet business needs.

WE ARE AUTOKINITON DRIVING SUCCESS FOR THE WORLD'S TOP AUTO MANUFACTURERS. At AUTOKINITON, we are more than just an automotive supplier - we are the backbone of vehicle performance and safety. Specializing in high-strength structural components and precision stamping assemblies, our parts are trusted by the world's leading automakers. Our dedicated teams, proudly deliver quality parts and assemblies that contribute to vehicle durability and safety. With decades of experience, a passion for continuous improvement, and a forward-thinking approach, we play a critical role in shaping the future of mobility. CAREERS WITH AUTOKINITON Building the Future-Together. Autokiniton is a trusted partner to the world's leading automotive manufacturers, known for our operational excellence and culture of continuous improvement. Our core value, "We, not I," reflects our commitment to collaboration, integrity, and shared success. We cultivate a workplace where independent thinking is encouraged, and every associate plays a vital role in our progress. Join a high-performance team committed to shaping the future of mobility-with opportunity, purpose, and growth at every turn. MAINTENANCE MANAGER RESPONSIBLITIES: * Support the Company's mission, vision, values and goals in performance of daily activities * Responsible for performance feedback and leadership of all direct reports including mentoring, coaching, counseling and corrective action when situation dictate * Provide key input into the development of the corporate and department strategic business plan and identify and track key measurable to support corporate and department business plan goals * Develop and drive the development of departmental strategic goals and identify and track key measurable to support the department goals * Responsible for leading all maintenance activities * Direct and drive the utilization of problem-solving methods for related corporate and customer issues * Ensures that all utility systems are fully operational and inspected in accordance with preventative maintenance schedules * Implement method to improve productivity capabilities and solve operation problems * Implement cost savings, renovations and safety projects for the plant * Administer preventive maintenance programs, emergency repair of production equipment, and support facilities and production equipment changeover * Assure all direct reports are aware of their Environmental Health and Safety (EHS) responsibilities and hold all direct reports accountable * Direct maintenance and engineering department process improvements and corrective actions * Provide leadership essential to maintaining safety as a fundamental priority in department based activities * Interface with customers and suppliers as appropriate * Oversee department-manning levels to assure compliance and improvements to the budget * Assure all safety devices are properly in place and utilized, and to verify individual usage of personal protective equipment by the entire work team. QUALIFICATIONS: * Bachelor's Degree in Engineering or equivalent experience in Engineering or Engineering cross discipline. * Minimum of eight (8) years' experience as a Maintenance Manager, preferably in a plant utilities environment or equivalent experience, and two (2) years of management experience * Minimum eight (8) years' experience in an automotive/metals/assembly environment * Possess knowledge of plant department function and corresponding roles and interact to facilitate overall plant synergy * Detailed knowledge of electrical, HVAC, pip fitting, machine repair, and construction methods * Knowledge of automotive equipment, preventative, and predictive maintenance processes. * Skilled trades certification desirable * Demonstrated experience in applying lean manufacturing concepts * Proven leadership ability and excellent interpersonal skills * Ability to work in a fast-paced team environment This full-time, salary role is a part of our Leadership team and reports to the Plant Manager. WHY YOU WILL ENJOY WORKING HERE: Competitive Wages and Comprehensive Benefits: Medical, Dental, Vision, 401(k) with Company contribution match, and up to 15 paid holidays annually, thanks to our generous holiday and holiday bridge schedule. We also provide a tool allowance for our Skilled Trades Associates. Relocation Assistance: Our company offers comprehensive relocation assistance, including coverage for temporary housing and travel costs for our Skilled Trades and Salaried positions. Work-Life Balance: Many of our Associates have stayed with us for 25+ years! It takes a good work-life balance to make it that far. We support your personal and professional priorities as they impact your well-being. Growth Opportunities: Take your career to the next level through tuition reimbursement programs, on-the-job training, learning management systems, and advancement opportunities from within our organization. Learning and Development: We empower all our Associates - from entry-level to senior-level - with the skills and knowledge necessary to succeed in their current roles and beyond at AUTOKINITON. AUTOKINITON is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. AUTOKINITON makes hiring decisions based solely on qualifications, merit, and business needs at the time. Posted Date 1/7/2026