Maintenance Technician jobs in Ann Arbor, MI

Responsible for the repair and upkeep of the college physical plant and facilities performing a variety of architectural, electrical, mechanical, plumbing, maintenance and boiler operator assignments. This position is expected to work in a multi-cultural diverse working environment. This description is intended to indicate the types of duties and responsibilities requested of the employee assigned this title. It is not intended to be an exhaustive list of all the duties and responsibilities that may be required: Operates and maintains air handlers, unit ventilators, and other HVAC equipment. Operates and maintains chillers, cooling towers, chilled water pumping systems, and refrigeration equipment. Operates and maintains boilers, heat exchangers, heating water pumping systems, and related equipment. Tests water properties and treats closed loop systems and cooling towers with water treatment chemicals. Repairs plumbing, lighting, electrical, and door hardware. Maintains compliance with fire regulations and OSHA requirements. Utilizes building automation/DDC system to operate equipment efficiently. Assists in construction and renovation of buildings. Performs preventative maintenance on a variety of equipment. Performs all other related maintenance and repair duties, as assigned. Welds or brazes, as required. Performs other duties, as assigned. Ability to work additional hours, as needed. Ability to perform repairs on a wide variety of plumbing, lighting, electrical, mechanical, and HVAC equipment efficiently Ability to maintain appropriate safety standards Ability to direct others Ability to weld to the satisfaction of the supervisor or have successfully completed an Oakland Community College credit welding course EDUCATION: High school diploma or equivalent. EXPERIENCE: Four (4) years of documented, directly related work experience. LICENCES: High Pressure Boiler Operator's license or Stationary Engineer license. Must also possess and maintain a current and valid Michigan driver's license. Level: Group II Compensation details: 33.66-38.19 Hourly Wage PI8b04342c3042-26***********7

The Maintenance Supervisor leads and directs skilled trades employees to meet the objectives of the maintenance department in a fast paced, high volume, unionized, manufacturing environment. The selected candidate will coordinate safety, quality, delivery, cost and morale initiatives. Drive throughput improvements and coordinate professional maintenance and breakdown maintenance activities. Provide coaching and mentoring to team members (both hourly and supervisory) regarding World Class Manufacturing techniques for problem solving and corrective action implementation. Additional responsibilities will include but are not limited to the following: Possess a general level of technical understanding related to maintenance, time-based maintenance (TBM), condition-based maintenance (CBM), and dynamic maintenance (DM). Influence the key performance indicators (KPI's), mean time between failure (MTBF) of components and equipment in their area, mean time to repair (MTTR), as well as maintaining equipment at basic conditions and continuous improvements of the equipment in their area. Address throughput, run to run, and downtime related issues with equipment in a production environment, supported by the Professional Maintenance Specialist (PMS) where applicable. Direct supervision of the Skilled Trades. Work with Skilled Trades staff in driving waste reduction efforts. Actively participate and lead kaizen project activities centered on Overall Equipment Efficiency (OEE) improvements and waste reduction opportunities identified through cost deployment. Basic Qualifications: High School Diploma or GED Minimum 3 years of industrial automation experience with project management experience Ability to work any shift and overtime as required Excellent organization, written and oral communication skills Excellent interpersonal skills and ability to interface with various levels of employees within all areas of the Plant from hourly represented employees to Senior Leadership as required Ability to build effective business relationships with plant leadership and customers Ability to handle multiple projects simultaneously Demonstrated troubleshooting problem solving experience Goal oriented self-starter with ability to lead teams. Ability to coach/mentor/develop skilled trade employees Must have a good working knowledge of Microsoft Office Preferred Qualifications: Bachelor's degree in technical/engineering field Experience in continuous improvement systems and lean manufacturing Experience leading maintenance teams in a union environment Green Belt/Red X/Six Sigma training Experience with: controls, robotics, drives and system level communication systems, sealing systems, glass cell systems, various conveyance systems, welding - all types, paint process and associated systems, vision systems and sensors use and application. Good working knowledge of Microsoft Office software programs Employment Type Full-time Stellantis At Stellantis, we assess candidates based on qualifications, merit, and business needs. We welcome applications from all people without regard to sex, age, ethnicity, nationality, religion, sexual orientation, disability, or any characteristic protected by law. We believe that diverse teams reflect our identity as a global company, enabling us to better address the evolving needs of our customers and care for our future.

CIE Automotive is a supplier of components and sub-assemblies for the global automotive market, basing its actions on the use of complementary technologies and various associated processes. Through Dominion, CIE USA offers multi-services and solutions that seek to maximize the efficiency of production processes through innovation. In both projects we are growing sustainably and profitably to position ourselves as the benchmark partner by satisfying our customers with comprehensive, innovative and competitive solutions with high added value. Primary Purpose: Responsible for the Preventative Maintenance Program to Molding and Auxiliary Equipment for our company. Essential Functions: Complete assigned work orders on non PM Maintenance Complete assigned PM tasks Collect data from machines and auxiliary equipment repairs and establish a Predictive Maintenance Program Troubleshoot electrical, hydraulic, and pneumatic problems on molding equipment Maintain auxiliary equipment such as dryers, loaders, hot runners, cooling towers, and grinders. Perform all documentation for respective area Perform duties instructed by your supervisor Qualifications: High School Diploma or equivalent Hydraulic and Electrical training 2 years experience in a similar field or 1 year experience as apprentice Experience in automotive plastic injection molding manufacturing is a must Physical Requirements: Standing, lifting, bending, twisting. Experience: Plastics injection molding: Minimum 2 years' experience (Required) Maintenance: Minimum 2 years' experience (Required) Shift availability: Afternoon Shift

BROAD FUNCTIONS: To obtain payments for goods while maintaining a high level of customer service. SPECIFIC RESPONSIBILITIES: Provides fast and friendly customer service Itemizes and totals purchases Verifies customer's age on restricted items Collects payments and/or verifies credit acceptance. Balances Cash Drawer Receives Merchandise Stocks shelves and cooler Controls Inventory and cash through proper transaction record keeping Performs light paperwork duties as assigned Maintains professional appearance and grooming standards as outlined in the employee handbook. Maintains Safe and Clean working environment CONTACT WITH OTHERS - Internal: Will have contact with other store clerks and managers on a daily basis CONTACT WITH OTHERS - External CUSTOMERS Vendors Requirements Education: Some high school or equivalent with the ability to read and perform math. Ability to read, speak and understand English. Experience: Ability to understand and implement written and verbal instruction. Ability to interact with customers on a friendly basis and work in a fast-paced environment Availability: Must be available to work weekends and holiday Physical: Must be able to work any area of the store when needed and to operate a computerized Point of Sale system/cash register. Position requires bending, standing, walking and repetitive use of hands and arms the entire workday. Must have the ability to lift 10 pounds frequently and up to 50 pounds occasionally. Position requires the ability to handle exposure to extreme temperatures and cleaning chemicals. Must be able to work alone

Job Title:- Maintenance Supervisor (May go Longer) • Daily Schedule/Shift Monday-Friday. Will work Saturdays some weeks. • Candidate needs to be able to work any shift 1st, 2nd or 3rd Shift. It is common for them to work 12 hours a day, seven days a week is common. • If the candidate prioritizes weekends for spending time with family or leisure activities, this position is not for them. • 9-hour shift hours. Team works a lot of OT hours!!! Could work up to 12 hours a day. • Work two Saturdays and possibly Sundays on and one off. 1st shift: 5:15am-2pm 2nd shift: 1:15pm-10pm 3rd shift: 10pm-6:00am Monday-Friday Job Responsibilities: The Maintenance Group Leader will be responsible for leading a group of Skilled employees to troubleshoot and repair complex equipment and processes. This role requires you to consistently administer National and Local Agreement between company and the United Auto Workers Union. The work is of a technical nature and requires you to use independent judgment within the limits of Global Manufacturing Systems, focusing on Safety, People, Quality, Responsiveness, Cost, and Environment (SPQRCE). Selected candidates will have the opportunity to learn new skills as well as influencing the development of manufacturing processes to support this historical and game-changing progression to electric and autonomous vehicles. What You'll Do (Responsibilities): • Read and react to the manufacturing daily plan in the moment • Manage multiple tasks in a fast-paced environment with competing priorities • Possess the experience to manage change and navigate ambiguity • Drive accountability through people and processes which may require difficult conversations in a unionized environment • Demonstrate a high level of interpersonal skills and work effectively with all levels of the organization • Demonstrate a high analytical ability to solve complex problems • Conduct appropriate checks and tests, and communicate evaluation of results • Recommends solutions to problems • Responsible for preventative maintenance and diagnosis of equipment malfunctions • Meets schedule and quality requirements • Complies with the terms of local and national labor agreements • Implements divisional and corporate policies and safety and good housekeeping practices • Maintain frequent contact and collaboration with others outside of the work group • Responsible for the effective use of personnel, material and equipment • Establishes a course of action to accomplish completion of the job and/or project • Has knowledge and ability to implement principles Additional Description Your Skills and Abilities (Required Qualifications): • One year of direct team supervisory experience or at least 5 months as an internal per diem group leader • Experience reading and understanding electrical, pneumatic, and hydraulic blueprints • Experience coordinating, managing, addressing performance concerns, and leading people in a fast-paced environment • Experience solving complex problems and working in a fast-paced environment • Strong interpersonal skills, experience managing conflict and making decisions in an ambiguous, fast-paced environment • Basic computer proficiency (i.e. Microsoft Word, typing, email etc.) • Must be willing to work weekends and rotating shifts What Can Give You a Competitive Edge (Preferred Qualifications): • Strong critical thinking and analytical skills • Experience working on multiple projects simultaneously • Willingness to ask questions, take initiative and be resourceful • Excellent written and verbal communication skills • High level of integrity, ability to deal with ambiguity, self-directed • Experience working cross-functionally with Engineering and Manufacturing Teams This job is not eligible for relocation benefits. Any relocation costs would be the responsibility of the selected candidate. • What is the highest level of education required? High School diploma. Skilled trades background is helpful • What are the years of experience required? 3 years in a manufacturing is the minimum. Skilled trades background, understanding the team and process Candidate who has worked in the Union is a plus

Maintenance Technician perform repairs that include fabrication and the installation of Secondary Equipment on the plant floor. Also, replacing worn or defective parts of machines. $31.30 plus shift premium and OT over 40 hours. Responsibilities MIG Welding Installation of Secondary Equipment Involved in taking apart existing machines and diagnosing issues Troubleshooting injection molding machines and stamping presses Fabrication skills; ability to service and maintain all types of production machinery, as well as hydraulics, pneumatics. Repair and replace chillers, heater bands, cores, pumps, Reads and interprets diagrams and schematic drawings to determine work procedures. Will be required to create adequate sketches if none are available from other sources. Dismantles and/or repairs machinery and equipment using various hand and power tools. Moves machinery and equipment using appropriate lifting and transport devices. Erects, assembles and installs a variety of equipment and machinery as required. Constructs foundations for machinery and equipment using appropriate construction tools and materials. Aligns machinery and equipment using the appropriate tools and devices. Erects and/or dismantles proper scaffolds and performs appropriate rigging to erect or dismantle machinery and equipment. Tests equipment after making necessary adjustments, and/or repairs or replaces defective parts or systems. Sets-up and uses machine tools to produce/modify necessary components. Carries out regular inspections and performs designated preventative maintenance procedures to utilities, services, buildings and machinery as directed. Performs repairs and/or modifications to buildings and structures as required. Qualifications Plastic injection molding experience a must Stamping Press repair 3 -5 years' experience in Fabrication Hydraulics/Pneumatics Electrical experience would be a definite asset Experience in automated equipment MIG Welding ticket a must This is a straight Midnights shift

Salary: $24-$28 We are seeking a skilled Roofing Repair Technician to join our team. In this role, this position will report to the Field Operations Manager - Operations Department. Working hours begin at 6:30am. This position will report to the office where you will prepare for your job assignments for the day and brief with your team. WHAT WE OFFER: Pay: $24.00 - $28.00 per hour + OT hourly rate | Unlimited Overtime Company Provided Vehicle - Gas & Maintenance Included Paid Company Outings 401(k) 401(k) matching - 3% Company Match Dental insurance 100% Paid for by Company for Employee Health insurance 100% Paid for by Company for Employee Paid time off - Accrued with hours worked. Vision insurance REQUIRED SKILLS: Knowledge of various roofing systems, skylights, siding, gutters and other potential leak and problem sources that arise from roof installations. Ability to self-start and problem solve. Exemplary customer service skills. Proficient in using hand and power tools, reading a tape measure, metal brake usage. Must have a strong attention to detail, perform work with quality and professionalism. Must be able to stand for prolonged periods of time, lift heavy objects, climb ladders and comfortable working from heights and on multiple pitches of roofing. ESSENTIAL RESPONSIBILITES:Assist the Operations Team with customer call backs within our Residential Roofing, Siding and Window department, including diagnosing and repairing complex issues on our residential job sites. Identify and repair roof leaks, damage, and structural issues. Assist in installing fascia metal, flashing, ridge vents, and other components. Install, repair, and replace residential roofing systems including asphalt shingles, tile, metal, and other roofing types. Customer interactions with homeowners to help address their issues and answer any questions regarding the repair/install process. Maintain accurate records of work performed using our CRM system, including job notes, photographs, measurements and materials used/needed. Ensure immaculate clean-up after installations. Strict adherence to all safety protocols to ensure a safe working environment. PHYSICAL DEMANDS & WORK ENVIRONMENT Primarily outdoor work exposed to all seasons of varying weather conditions. Must be able to lift and carry up to 50 lbs. Frequent climbing of ladders and working at heights. Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Freedom Roofing, Windows and Siding LLC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, gender, religion, national origin, protected Veteran status, disability, or any other characteristic protected by law.

Electrician Job Accountabilities is for 3rd Shift - 11:00p - 7:00a . Employee will work 8 hours shifts, Monday through Friday. Electricians are paid a base rate of $33.44/hour. We also offer a $0.40/hour shift differential for night shift. Must be able to work overtime if necessary. This position will troubleshoot, repair, program, replace, maintain and install electrical/electronic systems for production related equipment and building utilities within this manufacturing facility. Responsibilities include following all local, state and federal electrical codes. Documentation of problems and maintenance of equipment and facility systems are also required. This position will also provide training for equipment operation and safety precautions. Responsibilities also include installing and maintaining new and existing electrical writing within the facility. High school graduate or equivalent preferred, with 3+ years' experience in manufacturing environment needed. Associates/technical degree is preferred. Must have basic set of own tools. Knowledge of Allen Bradley/Omron/Direct Logic PLCs' are required as well as integrated window software to analyze AC/DC, single phase and 3 phase generators and AC/DC motors, relays, switches, breaker transformers, and power panels. This position also requires the individual to be able to read and interpret mechanical blueprints, electrical schematics and parts specifications. Effective written and verbal skills Possible equivalent Military Job Titles: Building Electrician; Construction Electrician; Power Plant Electrician; Precision Instrument and Equipment Repairer; Ship Electrician; Communications Equipment Operator; Avionics Technician. Electronics Technician.

Auburn Hills, MI - On-site MUST HAVE Strong mechanical and electrical aptitude and knowledge of equipment used in liquid filling or GMP-regulated environments such as pumps, mixers, and conveyors. MUST HAVE Hands-on experience fixing of pumps, motors, scheduling, and preventative maintenance. Company Overview: We are a specialty designer, developer, manufacturer, and packager of pure personal care products. The Maintenance Manager is responsible for leading the maintenance team and managing all aspects of facility and equipment maintenance to support efficient production processes. RESPONSIBILITIES: Supervise and coordinate the activities of the maintenance team to ensure efficient maintenance operations. Communicate effectively with management including Plant Manager, Production Manager, Supervisors, and other departments to align maintenance efforts with production needs. Develop, implement, and monitor preventative maintenance programs for all equipment and machinery. Respond promptly to equipment breakdowns; oversee troubleshooting, diagnostics, and repairs to minimize production downtime. Manage inventory of spare parts and maintenance supplies; oversee the ordering of necessary components. Drive continuous improvement initiatives related to equipment reliability and plant efficiency. Evaluate equipment performance and recommend or implement upgrades and replacements as needed. Coordinate and oversee external vendors and contractors for equipment repairs, installations, and routine service agreements, ensuring work is completed safely, on time, and to specification. Oversee installation and commissioning of new production equipment. Ensure strict compliance with all safety, health, and environmental policies and procedures. Maintain accurate maintenance records and reports. Collaborate cross-functionally with production, scheduling, and lab teams to meet operational goals. ADDITIONAL DUTIES: Maintain a thorough understanding of facility material flow and processing systems. Possess a deep understanding of process equipment operation and advanced troubleshooting techniques. Foster a culture of safety, accountability, and continuous improvement within the maintenance department. Develop and manage maintenance work schedules and project plans. Operate independently and prioritize tasks without direct supervision. Support and execute directives from upper management as needed. Hands-on fixing of pumps, motors, scheduling, and preventative maintenance. QUALIFICATIONS: 7+ years of maintenance experience in a manufacturing environment; 3+ years in a leadership or supervisory role preferred. Strong mechanical and electrical aptitude and knowledge of equipment used in liquid filling or GMP-regulated environments such as pumps, mixers, and conveyors. Proven experience with preventative maintenance programs and troubleshooting techniques. Excellent organizational, communication, and leadership skills. Working knowledge of safety regulations, OSHA standards, and environmental compliance. Ability to work hands-on while managing overall department operations.

Are you ready to take off your career at one of the best places to work? At Aeromexico, we are dedicated to offering our passengers the best travel experience. This is possible thanks to having the best talent in the industry. We strive to help all our employees grow, develop, and reach their full potential to achieve success in an inclusive, diverse, and equal environment. Are you up for the challenge? We are looking for a Maintenance Supervisor in DTW to deliver extraordinary experiences for our customers. This role is ideal for a responsible, adaptable and a decisive individual who understands how to lead all the maintenance processes in the station, it is a critical position, as if any aircraft presents a malfunction or mechanical failure, a quick and effective troubleshooting analysis must be carried out. Educational requirements: Aircraft Maintenance Technician studies Valid FAA license Experience: At least 5+ years of experience in the preventive and corrective maintenance of heavy aircrafts (more than 12,500 Kgs) including 2 years of experience in the Embraer 190 Skills to succeed: Focused on results: Prioritize actions and decisions even under the stress of the operation. Proactive: Challenge oneself and the rest of the work team during the operation to achieve a timely and safe departure. Strategic and Analytical Mentality: Seek and analyze in an expeditious way the most effective solution to problems that arise at the last minute, always thinking about minimizing the impact on our customers and the business. Join Us! Aeromexico is the ideal place for you to continue growing professionally and contribute to an incredible culture. Fasten your seatbelts-this is your chance to elevate the journey into an extraordinary experience. Aeromexico provides equal opportunities and does not discriminate against employees or applicants based on their race, religion, sex, country of origin, age, disability, sexual orientation, gender identity and expression, pregnancy, or illness. Important: The Aeromexico Talent Acquisition team will identify themselves properly and will never request payments or banking information during the selection process. Please check our job openings only through official channels.

Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood. 2. Schedule and coordinate all equipment installation activities, in the absence of site leadership. 3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements. 4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors. 5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards. 6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support. 7. Schedule and coordinate all equipment installation activities, in the absence of site leadership. 8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered) Education • High School Diploma/GED required • Technical/Trade/Sheetz training required Experience • Minimum two years' related experience required Licenses/Certifications • Valid Driver's License • EPA certifications - license I and II Tools & Equipment (Other than general office equipment): • Hand tools (hammer, measuring devices, wrench, level, etc.) • Power Hand tools (saws, drill press, grinders, sanders, etc.) • Welding tools (torch, plasma cutter, welder, etc.) • Motorized Equipment (generators, pressure washer, forklift, etc.) • Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

The Facilities Maintenance Supervisor who will be responsible for the general maintenance and care of the organization's facilities, equipment, and grounds. The Facilities Maintenance Supervisor will be a working supervisor while also overseeing and directing a team of building maintenance technicians. The role will travel between local facilities, work effectively under minimal supervision, and can work a flexible schedule. As a Facilities Maintenance Supervisor you will be responsible for Effectively planning and supervising the daily operation of the Maintenance staff supporting the troubleshooting, diagnosis, and repair of various machinery and equipment in a productive and safe environment Performing field service on various work orders, which include but are not limited to electrical, mechanical, plumbing, carpentry, and machine repair Developing, continually monitoring, and appropriately evolving the preventive maintenance (PM) schedule and procedures Processing and follow-up with requesters daily on Facilities work orders through a work order management system Inventory control of Facilities supplies needed for maintenance and repair related to building and grounds, including maintaining vehicle and equipment inventory Working with various contractors in planning and estimating small Facilities projects Assisting with internal project construction support as needed, which includes estimating labor and materials To be considered as a Facilities Maintenance Supervisor, you will need Minimum high school diploma or equivalent Minimum 5 years of experience as a building maintenance technician in a commercial and/or industrial field including practical experience in electrical, plumbing, construction, carpentry, heating and cooling systems and building compressed air systems Minimum 2 years of experience as a Maintenance Supervisor leading and directing maintenance technicians Ability to understand and interpret technical documents including blueprints and strong knowledge of electrical, plumbing, and mechanical systems Strong communication, organizational, and computer skills, including strong proficiency with Microsoft Excel, Outlook, and Word Skilled in the use of power tools and hand tools and must have own tools Ability to effectively maintain current preventative maintenance (PM) schedules and procedures as well as develop and implement new PM schedules and procedures A successful candidate may also have Experience operating a forklift and scissor lift Heating, Ventilation, and Air Conditioning (HVAC) experience PeopleSoft experience or similar Enterprise Resource Planning (ERP) system experience Ability to work overtime as needed including weekends If you share our passion for providing innovative solutions to complex challenges, we want you on our team! Roush is an EO employer - Veterans/Disabled and other protected categories If you need a reasonable accommodation for our employment application process due to disability, please contact Roush Talent Acquisition at ************.

Job Description Job Title: HVAC Commercial Service Technician Pay Scale: $24-32/hour To provide maintenance on commercial heating and air conditioning systems according to company standards and providing our customers with a high quality experience. Required Qualifications: High school diploma or its equivalent Valid driver's license Ability to read and interpret wiring diagrams and blueprints. Be familiar with a wide range of equipment and troubleshooting techniques. Demonstrate willingness to accept responsibility and leadership roles Demonstrate willingness to invest time in service training seminars and classes Universal EPA Certification Qualifications Desired: Universal EPA Certification Certificate of completion from a HVAC Technical School or Associates Degree 3 + years' experience

Job DescriptionBenefits: 401(k) matching Competitive salary Health insurance Vision insurance Benefits/Perks Flexible Scheduling Competitive Compensation Career Advancement Opportunities Job Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants Establish customer rapport to ensure the highest levels of satisfaction Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution Test electrical circuits or components for continuity, using electrical test equipment Repair or replace defective equipment, components, or wiring Qualifications: Past experience as an HVAC service technician or comparable education Valid Drivers License EPA Certification Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems Ability to climb ladders, crawl, and lift 40 pounds

Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title : Service Technician Location : Toledo, OH Schedule : Monday - Friday 7:30AM - 4:30 PM Pay Range : Starting Pay will range between $25. 00 - $35. 00 per hour depending on qualifications and experience. This is a full-time, hourly position. $3,000 Sign On Bonus! About Us : Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80 brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco. com and join us to own your future. Job Overview : The Field Service Technician for Ingersoll Rand's Compression Systems and Services Division serves customers by installing, troubleshooting, repairing, and maintaining all makes of rotary screw and reciprocating and/or Centac and ECC air compressors, along with additional compressed air system components. You will use precision measuring tools for diagnostic troubleshooting of compressed air equipment. In addition, you need to have knowledge of all operations and parts manuals associated with all equipment. Responsibilities : In addition to performing preventative maintenance on Ingersoll Rand compressed air equipment, our service techs will interact with customers to address existing and unanticipated equipment concerns. Collaborate with Service Coordinator on ordering and gathering parts and supplies necessary to complete installations and repairs. All service technicians will assist and train apprentices and Field Service Technicians. •Effectively communicates verbally and in writing with customers and co-workers. •Provides technical assistance on equipment pre-commissioning and start-ups, installations, and repairs of compressed air systems. Including “hands-on” work to assure equipment operates to customer's requirement with limited guidance from the Master Technician. •Increases Ingersoll Rand customers awareness of how Ingersoll Rand products, services, and solutions, such as Preventative Maintenance, Diagnostics, Audits and Leak Detection can benefit their operations. Requirements : •2 years experience of troubleshooting industrial/commercial mechanical systems. •Must possess a valid driver's license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to: DUI in the previous 5 years, Hit & Run, License Suspension, Reckless/Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years. •Every service technician is required to be on-call, but you will not be on-call for the first 90 days to get used to the schedule. This is shared with every service tech, and it requires being available 24/7 for the 1-week duration where you will go to customer sites. On-call weeks can be as often as every 4 weeks or greater than 4 weeks, but that will be determined by the hiring manager. •This position is highly physical and requires regular use of hands, fingers, walking, stooping, and kneeling. It requires employees to regularly lift and or move weight limits in line with the safety policy. •High School Diploma or equivalent required. Core Competencies : •Able to read wiring schematics and diagrams for all equipment. •Advanced network systems installations (IMMC/ASC, X Series Automation). •Basic vibration troubleshooting. •Basic Air Quality (system compressor/dryer - air treatment). •Operating knowledge of Microsoft office software and other basic computer usage. Working proficiency with handheld computer (i. e. Smartphone, iPad) and network bases. •Maintain proper business travel practices in a cost-efficient manner. Preferences : •2 years industrial air compressor maintenance & knowledge. •Degree program in Electrical/Electronic Technology or HVAC with basic knowledge of some or all of the following: AC/DC circuits, wiring diagrams/schematics, motors/controls, PLCs, HVAC electricity, controls, refrigeration systems and/or refrigerant certification or EPA Certification. •Veterans/Active-Duty Military are encouraged to apply. Travel & Work Arrangements/Requirements : •Service Technicians will travel daily in a 3-hour radius within our service area. •This position may require occasional travel for training. 1-2 times per year for one week at a time. •A company vehicle and fuel card will be provided. What We Offer : At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Starting Pay will range between $25. 00 - $35. 00 per hour depending on qualifications and experience. This is a full-time, hourly position. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. We are committed to helping you reach your professional, personal and financial goals. We offer competitive compensation that aligns with our business strategies and comprehensive benefits to help you live your healthiest. We are committed to building an inclusive and diverse culture that engages as well as values the different backgrounds and experiences of our employee, which, in turn, spurs innovation, generates creative solutions and enhances our customer relations. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40 respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit www. IRCO. com. TO APPLY : Please apply via our website **************** irco. com in order to be considered for this position. PandoLogic. Category:Installation & Maintenance, Keywords:General Mechanic, Location:Livonia, MI-48154

Job DescriptionBenefits: Bonus based on performance Company car Dental insurance Free uniforms Health insurance Vision insurance Company: Kaltec Plumbing, Heating & Air Pay: $15$21/hr (based on experience) + Overtime + Bonuses Kick-start your HVAC career with a company thats invested in your future. Kaltec is seeking motivated HVAC Maintenance Technicians with at least 1 year of HVAC trade school or hands-on training. If youre looking to grow your field experience and get your foot in the door with a reliable team, this is the place for you. What Youll Do: Perform seasonal maintenance on furnaces, air conditioners, and HVAC systems Complete 24-point inspections and cleanings Communicate findings and basic recommendations to homeowners Use our CRM system to log service notes and time Minimum Requirements: 1+ year of HVAC trade school or equivalent training Drivers license and reliable transportation Ability to work independently and follow safety procedures Strong communication and customer service skills We Offer: Competitive hourly pay + overtime and bonuses Company van and tools (after training period) Uniforms, paid training, and growth opportunities Weekly pay via direct deposit A supportive, professional work environment Interested? Lets talk. Apply now to start your HVAC journey with a team that respects your time, talent, and work ethic.

Job Description At Mobile Air & Power Rentals, we provide innovative cooling, heating, dehumidification, and power solutions for our customers nationwide. We rent out a vast array of equipment, including portable air conditioners, chillers, heaters, and generators, helping clients save time and money while enhancing their operations and memorable events. We are immediately hiring Service Technicians to join our dynamic team, all levels available starting at Entry Level up to Senior Technicians. Why Mobile Air? Here are some of the perks & rewards: Full-time positions with overtime and weekend opportunities Competitive hourly pay with quarterly bonus opportunities Health, Vision, and Dental Insurance Life Insurance 401k with company match Paid time off (vacation, sick days, holidays) Career development and advancement potential Employee discount programs What you’ll do: As a representative of Mobile Air, you will coordinate the delivery, installation, and servicing of our rental equipment. Process customer orders received from sales or the branch manager, ensuring timely fulfillment and delivery. Deliver exceptional customer experiences that foster repeat business. Install and connect heating equipment to natural gas or propane sources and set up flexible ductwork for temporary applications. Utilize appropriate PPE and fall protection at all times to ensure safety. Perform initial equipment startup and necessary service repairs, and retrieve equipment from customer locations upon rental completion. Conduct equipment reconditioning per established work instructions and document returned items, ensuring proper storage in the branch warehouse. Higher-level technicians will clean, troubleshoot, and repair air-cooled chillers and large tonnage HVAC equipment, including diagnosing refrigerant circuit issues and supporting installations. We’re looking for the following skills/experience: Experience levels ranging from 0-5 years are welcome. A high school diploma or GED is required; a 2-year HVAC certificate or Universal Refrigeration Certificate is preferred for higher-level technicians. Proficiency with Microsoft Office products; familiarity with MRP or rental software is an advantage. Must pass a DOT physical and drug test to operate company vehicles. Valid driver’s license with a satisfactory motor vehicle report (MVR). Candidates must be willing to undergo a background check prior to employment Ability to lift/move up to 50 lbs. using safe lifting practices. Strong customer service aptitude, effective communication skills, and mechanical knowledge. A willingness to learn and develop within the company. Work Schedule: This position may require working a rotating on-call schedule and being available for evenings, weekends, and holidays during peak seasons. Travel may also be necessary. Overtime and double-time pay rates apply for applicable hours worked. Join our team of dedicated professionals and contribute to the success of our HVAC operations while advancing your career in a fast-paced environment! #LI-Onsite

MACOM designs and manufactures semiconductor products for Data Center, Telecommunication and Industrial and Defense applications. Headquartered in Lowell, Massachusetts, MACOM has design centers and sales offices throughout North America, Europe and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 65 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe, and Asia. Click here to view our facilities. In addition, MACOM offers foundry services that represents a key core competency within our business. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives and leading industry distributors. Our sales team is trained across all of our products to give our customers insights into our entire portfolio. Wafer Fab Equipment Technician/Engineer Job Description: We are currently seeking an Equipment Technician/Engineer for the Ann Arbor Wafer Fab to perform repair, maintenance, and continuous improvement activities to all equipment used to process wafers. Responsibilities: * Executes all aspects of operation, repair, trouble shooting, preventive maintenance, adjustments, rebuilding and modifications to insure proper operation and maximum up-time of various types of processing equipment with little or no supervision. * Assists Engineering in commissioning of new equipment. * Uses various test and diagnostic equipment to trouble-shoot and repair systems. * Maintains necessary records, reports, written and verbal pass downs, parts inventory-reordering parts. * Leads or assists in the investigation and resolution of equipment related process problems. * Proactively drives safe practices within the factory, supports and follows site safety policies. * Self-starter: Independently learns and can be trained by others on the job, manages time by priorities. * Works in clean room environment wearing clean room garments. * Assist wastewater treatment operator with the daily operation and repair of the waste neutralization systems. * Communicates day to day events, direction, and repairs both written and verbally, through logs and pass downs. * Excels within a changing environment while working with others in a positive and cooperative manner to meet common goals and objectives in support of production and engineering - customer oriented. * Positively influences and supports others to succeed in their roles. * Some travel for external training maybe required as needed. Qualifications: * Experienced in semiconductor equipment repair and maintenance preferred. * Technical education preferred in electronics and/or mechanics, may be offset by experience. * Must be able to interpret electrical schematics and mechanical drawings. * Able to work on multiple tasks concurrently and prioritize issues and tasks according to production needs. * Occasionally lifts up to 50 lbs, works in awkward positions as necessary, walks, stands, or sits for up to 8 hrs. * Experienced with handling toxic and reactive chemicals and gases common to the semiconductor industry. * Good written and verbal skills, possesses good keyboard and computer skills. * Due to ITAR regulations, only candidates who are U.S. Persons (U.S. citizens, U.S. nationals, lawful permanent residents, or individuals granted asylum or refugee status) will be considered for this position. EEO: MACOM is an Equal Opportunity Employer committed to a diverse workforce. MACOM will not discriminate against any worker or job applicant on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, genetic information, veteran status, military service, marital status, or any other category protected under applicable law. Reasonable Accommodation: MACOM is committed to working with and providing reasonable accommodations to qualified individuals with physical and mental disabilities. If you have a disability and are in need of a reasonable accommodation with respect to any part of the application process please call *************** or email HR_*************. Provide your name, phone number and the position title and location in which you are interested, and nature of accommodation needed, and we will get back to you. We also work with current employees who request or need reasonable accommodation in order to perform the essential functions of their jobs.

Job Description Job Title: Valve Technician We are seeking a skilled and experienced Valve Technician to join our team. As a Valve Technician, you will be responsible for the installation, maintenance, and repair of various types of valves used in industrial processes. The ideal candidate should have a strong mechanical aptitude, exceptional troubleshooting skills, and a keen attention to detail. This role requires the ability to work independently and as part of a team to ensure the efficient and reliable operation of valves within a variety of industries. Salary range: $18 - $25 / hour depending on experience, with benefits that start on the 1st of the month after 30 days of hire ( Medical, Dental, Vision, 401k with employer match, life insurance, STD, LTD, and Pet Insurance). Key Responsibilities: Valve Installation and Maintenance: Install, inspect, and maintain a variety of valves, including control valves, safety valves, gate valves, globe valves, and ball valves. Perform routine maintenance tasks to ensure the optimal functioning of valves and associated equipment. Diagnose and troubleshoot valve-related issues, implementing corrective measures as needed. Testing and Calibration: Conduct testing and calibration of valves to ensure they meet industry standards and specifications. Use precision tools and instruments to measure, adjust, and document valve performance. Implement preventive measures to extend the lifespan and reliability of valves. Documentation and Reporting: Maintain accurate records of valve installations, repairs, and maintenance activities. Generate reports detailing findings, recommendations, and actions taken during inspections and repairs. Collaboration and Communication: Collaborate with engineers, project managers, and other team members to plan and execute valve-related projects. Communicate effectively with clients to understand their specific valve requirements and provide technical support as needed. Safety and Compliance: Adhere to safety protocols and industry regulations when working on valves. Ensure that all valve-related activities comply with relevant standards and guidelines. Qualifications and Skills: High school diploma or equivalent; additional technical education or certification in valve technology is a plus. Proven experience as a Valve Technician or in a related field. Strong mechanical aptitude and troubleshooting skills. Familiarity with different types of valves and their applications. Ability to read and interpret technical drawings and specifications. Proficient in using precision tools and instruments. Excellent communication and interpersonal skills. Attention to detail and commitment to quality workmanship. Ability to work independently and as part of a team. Physical Requirements: Ability to lift and carry heavy equipment. Comfortable working in confined spaces and at heights. Willingness to work in varying weather conditions. If you have a passion for valve technology, a commitment to safety, and the skills to excel in a dynamic work environment, we invite you to apply for the position of Valve Technician. Join our team and contribute to the reliability and efficiency of industrial processes through expert valve maintenance and repair.