Maintenance technician jobs in Eagan, MN

The Installation Assistant will support the Installation Specialist in the installation and anchoring of modular buildings and mobile trailers at customer locations. When not assisting the Installation Specialist, the Installation Assistant will perform duties as a Yard Technician, ensuring the units are maintained according to company standards. Essential Duties and Responsibilities:Installation Tasks: Assist in the installation and anchoring of modular buildings and mobile trailers at customer locations. Assist in the retrieval of modular buildings and mobile trailers from customer locations to the yard. Assist in installation of skirting, steps, and VAPs at customer locations. Assist in safety protocols for CDL drivers. Assist in ensuring trucks are properly loaded. Operate hand and power tools safely. Serve as a spotter for CDL driver on job sites. Interface with customers at job sites. Yard Technician Tasks: Clean all units, including washing and waxing flooring. Replace and install floor tile. Replace and install windows and doors. Replace and install exterior siding and other building components. Paint all portions of units to specifications. Remove and replace walls. Remove and replace lighting, plumbing and electrical. Perform light carpentry work/repair on customer job site. Operate company toter as needed to maneuver trailers in yard. Required Skills and Qualifications: Light carpentry and electrical experience. Basic mechanical skills to work on trucks. Good organizational skills. Demonstrated knowledge and skills. Ability to operate company service vehicles. Ability to pass DOT medical exam. Physical/Mental Demands: Ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion, and grip strength. Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Wears personnel protective equipment as required. Work Environment and Safety: Employee will work in a variety of environments including garage, work yard, in-town driving, highway/freeway driving, construction site locations, etc. Must be able to perform tasks in all conditions including wet, humid, and dry. Will be working in outside weather conditions and will have exposure to common maintenance hazards. Must maintain a professional, responsible, and accountable attitude and perform tasks in a timely manner. Required ability to maintain a safe and healthy working environment taking responsibility for any necessary precautions to protect themselves, the company, other employees, and the vendors to avoid any injury and health hazard. Must immediately report all incidents to supervisors. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

. Pay Rate: $22.00 an hour with an additional $2.00 an hour shift differential for swing and grave shift ESSENTIAL DUTIES AND RESPONSIBILITIES Maintain a neat and clean appearance for the entire property Empty outdoor trash cans and ashtrays Remove trash from parking lots and sidewalks Maintain and inspect interior and exterior of all buildings Maintain grounds including, but not limited to, mowing, sweeping, raking and laying sod Perform snow shoveling, plowing and removal Complete work orders in a timely manner Move office equipment and furniture as requested Maintain all tools and equipment Perform light carpentry and plumbing repairs Perform Event Center air wall and bleacher setup and maintenance KNOWLEDGE AND CERTIFICATION, SKILLS AND ABILITIES Knowledge and Certification Required: Previous experience in the safe use and operation of power and hand tools and the like Valid driver's license Previous experience in lawn maintenance, snow removal and the like Skills Required: Accurate and detail-oriented Organized and ability to adapt quickly to changing priorities Mechanical aptitude Abilities Required: Ability to work fast and efficiently Ability to independently complete multiple tasks in a professional manner Ability to troubleshoot, maintain and repair specialized equipment Ability to maintain high confidentiality Ability to interact with guests, coworkers and management in a professional and courteous manner Ability to follow established dress code policies and practice good personal hygiene REQUIRED TRAINING Treasure Island guest service training Bloodborne Pathogens training Any position-related training as determined by department manager PHYSICAL DEMANDS Must be able to walk and/or stand for long periods of time Must have a good sense of balance, and be able to bend and kneel Must be able to push, pull and grasp objects regularly Must be able to climb a ladder Must be able to independently lift 25+ pounds routinely Must have manual dexterity necessary to manipulate tools and equipment Must have good eye hand coordination Must be able to operate foot pedals WORKING ENVIRONMENT Work is performed throughout the entire property (inside and outdoors) and may include excessive noise, such as power tools, dust and fumes from paints, varnishes, stains and the like, flashing lights, frequent loud noises and cigarette smoke Required to work in extreme weather such as wet, damp, high wind, ice and snow Must be able to work in cramped, tight quarters Occasionally overtime may be required Must be willing to work a flexible schedule including all shifts, weekends and holidays

We are seeking a skilled and dedicated Maintenance Technician to join our team. The ideal candidate will possess strong mechanical knowledge and experience in facilities maintenance, ensuring that all equipment and systems are functioning efficiently. This role requires a proactive approach to problem-solving, excellent customer service skills, and the ability to work independently as well as part of a team. Duties Perform routine maintenance and repairs on various equipment and systems, including mechanical, electrical, and plumbing. Utilize tools such as an ohmmeter for troubleshooting electrical issues. Maintain accurate records of maintenance activities using Computerized Maintenance Management Systems (CMMS). Supervise and lead maintenance projects, ensuring tasks are completed on time and to standard. Collaborate with other departments to address facility-related concerns and improve overall operations. Respond promptly to maintenance requests from staff and ensure customer service excellence. Conduct inspections of facilities and equipment to identify potential issues before they become major problems. Assist in the training of new maintenance staff as needed. Requirements Proven experience in facilities maintenance or a related field. Strong mechanical knowledge with the ability to troubleshoot various systems. Familiarity with logic controllers is preferred. Excellent leadership skills with the ability to supervise effectively. Strong customer service orientation with good communication skills in English. Ability to work independently and manage multiple tasks simultaneously. A valid driver's license may be required for certain positions. If you are passionate about maintaining high standards in facility operations and have the skills we are looking for, we encourage you to apply for this exciting opportunity as a Maintenance Technician. All shifts are available.

The McLane team is the driving force behind our success. A diverse group of professionals, from Sales and IT to Dispatchers and Mechanics, work together seamlessly to keep our operations running smoothly. This position is an entry-level training and development position. with the wash bay, fuel Island and yard clean up and assist other mechanics when needed. Pay rate: $21.00-$23.00 per hour. ~ Generous benefits that start on your 60th day: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance. ~ Earn vacation time, and sick leave accrual from day one and paid holidays after 90 days. ~Additional benefits: pet insurance, parental leave, employee assistance programs, discount programs, tuition reimbursement program, and more! What you'll do as an Mechanic I: Perform preventative maintenance service on tractor and trailers. Perform light repairs and minor electrical repairs. Drive or be trained to drive tractors and or tractor-trailer combinations. Check and diagnose electrical systems. Read preventative maintenance list and keep current on preventative maintenance due. Clean shop areas as needed. Maintain fleet tires. Be trained and certified to operate any required equipment within 30 days after hire. Comply with company attendance policy. Maintain a flexible work schedule to meet the changing needs of the job. Must be available for shop on-call rotation, and able to do road calls using a company vehicle. Qualifications you'll bring as a Mechanic I: Have High School Diploma or GED. Tech School classes or equivalent training preferred. Possess a Valid Class C Drivers License. Have 2 years experience in preventative maintenance, minor repairs on tractor and trailers, some electrical diagnostics, light repairs, dismounting and mounting tire machine, use of tire bars, and use of tire gun. This position requires the ability to read, write, and understand English at a level sufficient to perform job-related tasks effectively and safely. Building an expansive nationwide network of team members for 130+ years has allowed us to stay agile for our clients across the restaurant, retail, and e-commerce industries. We look to the future and are ready to continue making industry-defining moves by embracing the newest technology into our practices, continuing team member training, and emphasizing our people-centered culture. All applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Maintenance Technician First Shift Hours: Monday-Friday 7am-3pm Compensation: $28-$32 per hour About The Job: Lakeside HR Group has been engaged by our client to recruit for a Maintenance Technician to join their manufacturing team. Our client is a leading North American manufacturer of high-quality, durable industrial and storage products used across a variety of industries. They are known for their strong company culture, focus on safety, and dedication to innovation and continuous improvement. If you're a hands-on problem solver who enjoys keeping machines running smoothly and takes pride in maintaining a safe, efficient production environment, this could be a great opportunity for you. You'll join a team that values collaboration, reliability, and craftsmanship in everything they do. Key Responsibilities: Perform preventive maintenance on electrical, mechanical, and industrial equipment. Troubleshoot and repair production equipment such as control panels, compressors, ovens, bearings, drives, and HVAC units. Weld, cut, and grind metal for mold and machine repairs. Build and remodel equipment for manufacturing operations. Maintain accurate maintenance documentation and requisitions. Ensure a safe work environment by following company and OSHA safety guidelines. Support operational teams with technical assistance and problem-solving. Perform additional maintenance and repair tasks as assigned by management. Required Skills: 2+ years of industrial maintenance experience (education or equivalent training considered). Associate's degree in Electrical or Mechanical Maintenance preferred. Journeyman's card in Electrical or Mechanical trades a plus. Experience with rotational molding or plastics manufacturing a plus. Manufacturing experience strongly preferred. Forklift and scissor lift certification required. Strong troubleshooting, mechanical, and electrical aptitude. Ability to lift up to 50 lbs and work in hot, humid environments. Benefits: Competitive pay and comprehensive health benefits 401(k) with company match Paid time off and holidays Opportunities for advancement within a growing organization Supportive, team-oriented culture focused on safety and quality About Lakeside HR Group: At Lakeside HR Group, we understand that finding the right job is essential for your career success. We are a boutique-style human resources consulting and recruiting firm dedicated to providing personalized, tailored solutions. When you partner with us, you are not just getting a recruiter; you are getting the entire Lakeside team working together to support your career goals. Partner with us at Lakeside HR Group, where we are more than just a recruiting firm; we are your partners in achieving your career aspirations.

11:30am-8:00pm/Monday-Friday Staples is business to business. You're what binds us together. Our supply chain team is dedicated to meeting our customers' needs both now and in the future. By pairing innovative technology with dynamic employees, we create smarter, more efficient ways to meet our customers' needs faster. Our network of distribution, fulfillment, fleet, furniture installation and professional teams work together in fun and safe environments to deliver state-of-the-art products, services, and expertise to our customers. What you'll be doing: As a Maintenance Technician 2 you will perform preventative and spontaneous maintenance on conveyors, electrical motors, material handling equipment, skill saws, propane torch, man-lift, hand tools, power tools, welding equipment, grinders, electrical test equipment and ladders as well as lift equipment jacks, chargers, and batteries. In your role, you will perform general building maintenance including overhead doors, construction repair, roll carts, floor repair and second level gates, doors, etc... You will perform light plumbing maintenance and perform carpentry assignments as needed. Safety is our utmost priority so, in this role, we will look to you to ensure safe work practices and embrace our safety culture. In this role you will be essential to the success of Staples Supply Chain as we deliver to our customers. What you bring to the table: A mechanical aptitude, knowledge of hydraulics, electrical, pneumatics, and ability to learrn to read blueprints/schematics including electrical schematics Ability to use vendor manuals and procedures to perform preventative maintenance and troubleshooting tasks Ability to be trained and MHE certified to operate power material handling equipment, i.e. Forklift, Electric Pallet Jack, etc. An inclusive approach with your colleagues and customers to forge strong relationships and foster collaboration to resolve issues Ability to demonstrate analytical thinking and problem-solving Ability to adopt our safety procedures quickly and ensure safe work practices Ability to be comfortable working in a warehouse environment with seasonal temperature variations Basic English language skills (both verbal and written) Qualifications: What's needed- Basic Qualifications: A high school diploma or general education degree (GED) 1+ year of related experience Ability to pass a drug screen to the extent legally permissible As a Full-Time associate, you must have the ability to work additional hours beyond scheduled shift; additional overtime hours will be required based on business need Ability to work at heights up to 60 feet or more as needed An ability to lift, push or pull boxes/merchandise weighing between 70 pounds and 100 pounds by hand Must be at least 18 years of age What's needed- Preferred Qualifications: Trade school background We Offer: · · Competitive Pay: $25.12 - $34.54/hour + $1.00 Shift Differential · Inclusive culture with associate-led Business Resource Groups · Flexible PTO (22 days) and Holiday Schedule (7 observed paid holidays) · Online and Retail Discounts, Company Match 401(k), Physical and Mental Health Wellness programs, and more perks and benefits The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. At Staples, “inclusion” is an action word. It represents what we do to ensure that all employees feel valued and supported to contribute to their fullest potential. When we operate inclusively, diversity naturally follows. This is why we work hard to foster an inclusive culture, as we seek employees with unique and varied perspectives and areas of expertise. The result is a better workplace and innovative thinking that helps us exceed our customers' expectations - through the power of the people behind our iconic brand. Staples is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or any other basis protected by federal, state, or local law.

Build Your Career with Ashley! Electromechanical Technician What Will You Do? Electromechanical Technicians maintain and repair electromechanical drives, sensors and automated machinery while working with maintenance and engineers to install and evaluate electromechanical systems to support the manufacturing process. What Do You Need? ·Knowledge of troubleshooting and repairing CNC manufacturing equipment, PLCs, motor controls and mechanical assemblies ·Knowledge of with troubleshooting and repairing CNC manufacturing equipment, PLCs, motor controls and mechanical assemblies ·Knowledge of programming PLC's, HMI's as well as PC based systems a plus ·Knowledge of working with three phase power as well as a variety of different control voltages a must. ·Ability to use all shop tools ·Ability to use all testing and measuring equipment and tools required to maintain or repair electromechanical control systems Who We Are At Ashley, we're more than a business…we're family. As the largest manufacturer of home furnishings in the world, we know what it takes to build incredible furniture and future leaders. We're problem solvers with the grit to persevere during challenging times and innovators who won't coast when times are good. We create solutions, not excuses. And never settle for status quo. It's the reason we're always searching for better ways to deliver an exceptional customer experience. That's why Ashley Furniture is #1 in our industry. Ready to grow? You've come to the right place. Ashley Furniture has a “Growth Mindset”, and once you join our team, you'll learn from the best in the business. Apply today and find your home at Ashley! Benefits We Offer Health, Dental, Vision, Employee Assistance Program Paid Vacation, Holidays, and Your Birthday off Generous Employee Discount on home furnishings Professional Development Opportunities Ashley Wellness Centers (location specific) and Medical Tourism Telehealth 401(k) and Profit Sharing Life Insurance Our Core Values Honesty & Integrity Passion, Drive, Discipline Continuous Improvement/Operational Excellence Dirty Fingernail Growth Focused To learn more about Ashley Furniture, our community engagement programs, environmental stewardship, and our core values, please visit our Corporate Social Responsibility information page: Corporate Social Responsibility We are an equal opportunity employer and provide a drug-free working environment. While Ashley appreciates the interest of all candidates only those meeting specific position requirements may be contacted. Principals Only.

Why you will enjoy working with Diamond: Competitive weekly pay Great health benefits include Health, Dental and Vision Insurance, HSA and FSA options, a 401(k) Retirement Savings Plan, a 529 CollegeSavings Plan, and Colonial Life Benefits Employer contributions to an HSA A close-knit team environment Monthly staff appreciation drawings, quarterly staff lunches and annual holiday events Paid time off and holidays to promote a work-life balance A clean and safe working manufacturing environment Temperature and humidity-controlled environment Casual dress code, free company shirts Paid meal and rest breaks Referral bonuses Volunteer overtime opportunities Job Summary: The technician is responsible for the maintenance, continual operation and continuous improvement of all DOD lines and related auxiliary equipment. This position will optimize mechanical efficiency by adjusting machinery and equipment settings. This position requires a higher mechanical and electrical skill set and past experience on printing or industrial equipment. This position works Monday-Thursday; 1:45pm-11:45pm Essential Duties and Responsibilities: Perform required preventative maintenance on equipment; ensure equipment is running to standard processes; optimize mechanical efficiency by adjusting machinery and equipment settings. Assist with the training of team members on safe and efficient use of equipment. Assist Operators with complex job set ups, trouble-shooting when issues arise Assist Production in adhering to or helping create new procedures as needed Assist operators with remakes and restarts for production: ensuring the correct product is being produced/reproduced. Job sign offs and first article check when needed Proactively communicate essential information to the team including information regarding incomplete repairs and any potential problems on the lines. Participate in developing action plans to create greater efficiencies and resolve potential issues with safety, quality, production and 5S Use the appropriate hand/power tools, electric and volt meters, equipment to diagnose, troubleshoot and repair/replace parts Other duties as assigned Requirements Minimum of two years of experience in the print industry as a Machine Operator High School diploma or equivalent Prior experience troubleshooting PLC devices, printers and labelers; Pneumatic and hydraulic Experience in encoding and imaging including barcode construction Software Knowledge of Data-Trac and GT preferred Software knowledge of CPST, Atlantic Zeiser and Precision Finishing lines Shrink-wrap and oven operational knowledge Multi feeder and labeler operational knowledge Hot melt equipment and operational application knowledge Ability to communicate effectively with all levels within the company Proficient in basic computer operations Strong problem solving abilities High attention to detail Knowledge of OSHA regulations and lock-out tag-out procedures Flexible and willing to work over-time and/or weekends as needed Preferred: · Technical Degree and/or five years minimum experience in the print industry as an Operator Salary Description $26-32

Benefits: Bonus based on performance Flexible schedule Opportunity for advancement Company parties Skilled Handyman / Craftsman If you are a handyman, you understand how important it is to be versatile. If you are able to adapt and change to many different activities, you might be the right fit for this job. Handyman Connection of Eden Prairie is seeking an experienced handyman for residential and light commercial work. Benefits Make anywhere between $25-$50/hour plus bonuses! Professional office support regarding scheduling, customer support and job tracking Free access to custom mobile application for scheduling and communications Successful marketing campaign that brings us well-qualified customers Branded apparel and signage Serve the great people of Eden Prairie and the surrounding area Job Summary Provide basic construction skills for residents and businesses in Eden Prairie and the surrounding area Bid work and produce it with great satisfaction Effectively communicate with clients and suppliers Job Requirements Great customer service and client relations Knowledge of building codes Material management Must have current driver's license and insurance Must have tools, work vehicle and good references Must have experience in the remodeling or home repair trades Must pass screening process which includes a background check Independent contractors must carry liability insurance and workers comp Must have a smart phone and access to the Internet Skill areas in at least three (3) of the following: General Carpentry - Rough and Finish Bathroom Upgrades/Remodel Kitchen Refresh/Remodel Painting Interior and Exterior Drywall Repair/Patching/Caulking Minor Plumbing and Minor Electrical Knowledge Flooring Repair and Installation Handyman, General Home Repairs and Maintenance Work Our customers love us! One happy customer recently said, "We had Handyman Connection out to do work on our stairs and couldn't be happier with the end result! Our stairs are fully finished and matched our floors perfectly. Great craftsmanship, and done at a great price! I will recommend to friends and family for their home improvement needs! Thank you again!" Apply today to become our next Handyman! Join a team where quality workmanship and customer satisfaction come first! Apply now and start crafting your future with us! Compensation: $25.00 - $50.00 per hour Your locally owned Handyman Connection franchise contracts with talented craftsmen like you to deliver quality workmanship and professional service for our customers. If you're interested in: high earnings potential a flexible schedule that you control using your skills to help improve other's lives Handyman Connection might be a great fit for you. Homeowners across North America have been calling on Handyman Connection for our professional craftsmanship and great customer experience since 1991. Each Handyman Connection franchise is locally owned and operated, backed by the company that helped launch the industry.

Maintenance Technician We are currently hiring for a Maintenance Technician on 2nd shift for our maintenance team!!! Opportunity awaits you at CATALLIA MEXICAN FOODS! Do you want to work for a company that is committed to growing the capabilities of their employees while working in a diverse environment? Are you looking for new ways of thinking while challenging and expanding your knowledge? If so, you have come to the right place. Catallia Core Values: Sharing our cultural traditions, Hispanic food expertise and 30 years of tortilla manufacturing experience, we work hand-in-hand with customers to deliver authentic products and innovative solutions that meet today's market needs. We honor that promise with our commitments to customer-focus collaboration, industry leading quality, innovation and team empowerment, high ethics and integrity in all partnerships, and proven food safety and personal safety standards. Position Overview: This is a hands-on position and will require that the individual to troubleshoot, service, repair, adjust automated equipment and building systems. This individual will be responsible for contributing to a consistent, safe, and productive work environment and adhering to operational and personnel policies and procedures. With a focus on the success of the overall operation, the individual will work closely with the maintenance team to handle repairs of automated equipment and other scheduled maintenance activities. Key Responsibilities & Essential Functions: Contribute to an effective, predictive, and preventative maintenance program (including repair, modification, and installation of equipment) in order to improve production efficiency and ensure optimum machine time availability. This will include Robotics, Automated Processing Equipment, HVAC systems, Refrigeration Systems and other plant operational systems. Regularly inspect plant facilities, production support systems and equipment in order to support effective plant operation. Respond to line calls from production to assist with the uptime of the equipment. Will occasionally communicate and work with outside contractors. Maintain facility and equipment for safety (food and teammate) issues and respond appropriately. Contribute to a fully operational maintenance shop by communicating needs and keeping the area neat and organized. Communicate effectively with maintenance team members from other shifts to ensure clarity and continuity. Follow instructions as directed by the Maintenance Manager or a designate of the Maintenance Manager. General Responsibilities: Promote all plant safety, GMP's and food safety policies and procedures Actively participate in Food Safety and Food Defense related activities Perform additional duties as directed. Education & Experience: High school graduate or equivalent 1-2 year Technical Certification in maintenance mechanics, electricity, electronics, or 3-4 years of industrial maintenance experience. Experience in a food production or bakery environment is a big plus. Experience in building and automated equipment with a high mechanical aptitude. Experience with automated food processing equipment a plus. TIG welding and fabrication skills required. Troubleshooting mechanical, some lighter electrical control with the use of a volt meter, sensors, motors, etc. Specific Competencies: Proficiency in equipment evaluation, installation, maintenance and repair. Ability to identify problems and react appropriately. Commitment to process improvement Proficiency with a wide range of tools and applications General Competencies: Ability to work alone or on teams Hands on individual Self-motivated Flexibility Excellent interpersonal communication skills Attention to detail Integrity Physical Requirements/Environment: Stand/Walking: Continuously (6-8 hours or more) Grasp: Continuously (6-8 hours or more) Pull/Push: Occasionally Lift/Carry: Continuously/Frequently up to 50lbs. Physical Environment: Continuously work around moving machinery, working in a temperature controlled 75-degree environment. Catallia Mexican Foods is an Equal/Opportunity/Affirmative Action Employer. All qualified applicants will be considered without regards to race, national origin, color, religion, age, genetics, sex, sexual orientation, gender identity, disability, or veteran status. Compensation details: 31-34 PIb78f1895ccd2-31181-38976086

The A- Tech Assists in directing junior technicians and functions as a skilled-level technician who can inspect, diagnose, and perform automotive repairs and preventive services. Essential Job Functions Provide Helpful, friendly, and timely service to customers with a We Can Do That attitude. Inspects, diagnoses, and identifies repairs in automotive systems including brakes, alignments, suspension, and cooling systems. Ability to diagnose, repair and assess engines. Changes oil and/or transmission fluid and filters. Install and perform tire maintenance. Road test vehicles. Helps increase sales, improve store profitability, and reduces controllable expenses. Leads and mentors junior technicians to assist in their growth and development. Maintain a clean and safe work environment. Recommends tires, parts, and services to Service Manager for customers. Ability to work in a fast-paced, results oriented team environment. Treats all teammates, customers, vendors with dignity and respect. Maintain a clean and safe work environment. Requirements: Position Requirements: Valid Drivers license and acceptable driving record. Ability to perform continued standing, bending, crouching, twisting, and crawling ASE certifications and/or technical school degree are preferred but not required. Experience: Tire service: 5 years (Preferred) Compensation details: 90000-100000 Yearly Salary PIed38f1a91656-31181-39168440

Job DescriptionA day in the life You arrive for 2nd shift and take the handoff from the day crew. A work order flags a hydraulic leak on a packaging line. You trace the issue, swap a worn hose, test pressures, and fine-tune the controls to get throughput back on target. Between calls, you complete preventive maintenance on a facility air compressor and document findings so the next scheduled service is seamless. Throughout the night, you keep equipment safe, reliable, and production-ready using a mix of mechanical, electrical, pneumatic, and hydraulic know‑how. Compensation & benefits Pay Rate: $32.00 - 36.00/hour, depending on experience Full benefit package including vacation, medical, 401k Schedule 2nd Shift: Monday - Thursday, 2:30 PM - 1:00 AM (a $1.00 shift differential applies) What you'll do Install and maintain production machines and facility equipment to keep operations running smoothly. Respond to emergency/unscheduled repairs during production and perform scheduled maintenance during service windows. Apply mechanical, electrical, pneumatic, and hydraulic troubleshooting skills to repair production machinery. Read and interpret equipment manuals and work orders to carry out required maintenance and service. Diagnose faults, replace or repair parts, test, and make precise adjustments. Execute routine preventive maintenance on machines, equipment, and plant facilities. Use a range of hand and power tools, electric meters, and material handling equipment safely and effectively. Identify faulty operations or defective materials and promptly report unusual situations to supervision. Comply with safety regulations and maintain clean, orderly work areas. Qualifications High school diploma/GED and completion of a craft apprenticeship, or an equivalent combination of education and production maintenance experience. 4+ years of manufacturing experience with strong hydraulic, pneumatic, mechanical, and industrial skills; some Electrical and PLC experience. Why this role matters Your work directly supports site business goals by executing safe, predictive, and productive maintenance systems and processes that minimize downtime and boost throughput. All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, national origin, sexual orientation, gender identity, disability, veteran status or any other characteristic protected by federal, state or local law.

rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** 2nd Ops Technician Position Summary The 2nd Ops Technician I is responsible for ensuring quality parts are completed per the operation specifications listed on the print, process sheets, or work order. This position will perform standard and repetitive sequences of operations and setups on blasting, buffing, polishing, laser marking, laser welding, and deburring equipment. Other processes include light assembly and packaging components and product in preparation for shipping. 1st Shift: Monday - Friday 6:00 am - 2:30pm Responsibilities 2nd Ops Technician Duties and Responsibilities * Set up and operate equipment for laser marking, laser welding, blasting, buffing, polishing, assembly, and deburring * Maintain average machine set-ups and targeted rates per hour efficiencies * Perform preventative maintenance to ensure consistent machine performance * Finish products in accordance with customer, regulatory, and company requirements * Work on components that require adjusting, fitting, and aligning to close tolerances * Use basic inspection equipment such as a micrometer, caliper, Micro Vu, Optical Comparator plug gages and thread gages to inspect parts * Read and understand basic blueprints * Inspect products per the In-process Inspection (IP) * Read and understand routers, DPM's, MPS procedures and work order travelers * Assemble and package diversified medical components, sub-assemblies, or products to customer requirements to procedure, instructions and prints * Determine packaging by looking at the bill of materials (BOM) * Adhere to clean-room requirements * Perform a variety of duties such as molding, washing, label printing, labeling, deburring, tray and pouch packaging and sealing and boxing for sterilization. * Deburr parts to print using deburring knives, hand grinding tool, dremel, or other deburring tools * Identify and remove burrs from all types of thread holes and plate assemblies * Read and understand job layouts * Use a microscope and hand tools * Operate laser marking and welding equipment Qualifications 2nd Ops Technician Qualifications * Ability to run a variety of secondary operations equipment * Ability to use a microscope and hand tools * Ability to perform a variety of work duties * Microsoft Office proficiency (Outlook, Word, Excel, PowerPoint, Publisher) * Clear and effective verbal and written communication skills * Attention to detail * Organizational skills * Ability to work in a fast-paced team environment * Ability to prioritize and multitask Desirable Criteria & Qualifications * 1 year of experience in a manufacturing environment * Medical manufacturing experience * Experience working in a highly regulated industry (FDA, ISO) rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k) retirement plan with employer match, profit sharing, short- term and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: * Onsite Clinic * Paid Parental Leave * Monthly Social Events * Annual Employee Appreciation Week * Volunteer Opportunities * Training and Development Opportunities * Tuition Reimbursement * Wellness Program Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $20.00 - USD $24.00 /Hr. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

The production line mechanic will be responsible for all production maintenance, including product quality control, line maintenance, and repair of line machinery and equipment. This role involves applying mechanical expertise in determining work methods and procedures for producing quality product. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Responsibilities: Follows, without exception, all work instructions and safety policies, including use of all PPE and safety equipment Performs routine preventive maintenance checks on all production equipment and machinery Repairs basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switches Observes and listens to mechanical devices in operation to locate causes of problem Dismantles devices to gain access to and remove defective parts Lubricates and cleans machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plant Accomplishes all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiency Follows all safety rules and procedures including Lockout/Tagout program, housekeeping and observes the operations to insure a safe work environment Performs other related duties as assigned Requirements: High School Diploma or GED 3-5 years' experience in a maintenance-related position within a manufacturing environment; or equivalent combination of training and experience Ability to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc. Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gauges Basic understanding of systems, equipment and schematics Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skills Basic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractions Ability to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties The pay range for this position is $28.00- $32.00 an hour. The exact pay offered will depend on candidate's experience, skills, etc. Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

Benefits: Flexible schedule Paid time off Competitive salary . Job Benefits: Monday through Friday work week (8am to 5pm) - No weekend work. Positive work environment. Locally owned company with the backing of a national brand, Ace Hardware. $35.00 TO START , REVIEW AFTER 90 DAYS Vacation pay, travel allowance W-2 status with the flexibility of an independent job Travel and cell phone allowance We are one of the Twin Cities top-rated handyman, repair, and remodeling companies. Since 2009, we have provided homes and businesses throughout metro area with quality craftsmanship for all of their handyman needs. We are currently seeking highly motivated professional craftsmen with skills in multiple trades. Job Responsibilities· Perform all types of quality handyman repairs· Carpentry· Deck building and repair Drywall repair· Painting· Tile work· Basic plumbing and electrical swaps Qualifications· 7+ years of Carpenter or Handyman experience· Own truck or van and tools· Strong work ethic and professional demeanor· Excellent customer service skills· Collaborative, optimistic, reliable· Knowledgeable in multiple trades We pay our employees competitive wages, offer incentives, and the ability to grow with the company. If this sounds like the kind of position you've been looking for we want to hear from you. Apply today! Compensation: $35.00 per hour The 800+ Craftsmen who represent our Brand are the heart and soul of our turn-key, white-glove home repair, maintenance, and improvement service. They are skilled and experienced in many trades, but their professionalism and attention to detail is what sets them apart from others who work in the industry. Most of the projects completed are for Repeat and Referral Customers-folks truly appreciate our high level of service, and they often request additional work by asking for particular Craftsmen by name. If you take great pride in your skills and abilities and wish to join a proven, winning TEAM, please apply to the position(s) available by selecting "Show Me All Jobs" above. Ace Handyman Services is a franchise network of Independently Owned and Operated Franchises. Your application will go directly to the franchise owner, and all hiring decisions will be made by the management of that franchise. All inquiries about employment at this franchise should be made directly to the franchise owner, and not to Ace Handyman Services Corporate.

Job Description Indrotec is urgently hiring experienced Facilities Engineers with a current Second Class (C2) Boilers License or higher to support school facilities in the St. Paul area. Candidates holding a valid Special Boiler License are also encouraged to apply and may be considered if actively working toward their Second Class (C2) license. Pay rates will be lower than the posted rate until the Second Class (C2) License is obtained. This is a great opportunity to put your mechanical, custodial, and maintenance skills to work in a steady, long-term position that helps maintain safe and welcoming spaces for students and the community. If you enjoy hands-on work and take pride in keeping buildings running smoothly, we'd love to hear from you. Call Indrotec at ************ for an immediate interview. These positions are temporary for 67 days, after which candidates will be considered for permanent hire. Minimum Qualifications High School Diploma or GED Certificate required. Must possess and retain a Second Class Boiler license or higherissued by the State of Minnesota (No substitutions allowed). Special Boiler License holders may also be considered if actively pursuing their C2 license Pool Certification required within six (6) months of appointment if assigned to a facility with a pool. Knowledge, Skills, and Abilities Knowledge of standard custodial practices and procedures. Familiarity with safe operation of tools, machines, and equipment used in cleaning and maintenance. Working knowledge of boiler and heating plant operation and maintenance. Ability to follow verbal and written instructions. Strong interpersonal skills; ability to interact effectively with school staff, students, and the public. Physical endurance for continuous standing, walking, lifting, and other sustained activity. Ability to lift up to 50 lbs occasionally and push/pull up to 110 lbs. Comfortable with tasks requiring balancing, climbing, stooping, kneeling, or crawling. Essential Duties and Responsibilities Operate and maintain boilers and mechanical systems; inspect, oil, grease, and repair equipment. Clean and maintain floors, carpets, windows, walls, and furniture. Sanitize restrooms and replenish supplies. Perform grounds maintenance: mow lawns, remove trash, clear snow/ice, trim hedges. Open and secure building daily; monitor lighting and security conditions. Perform minor plumbing, electrical, and general repairs. Monitor and report fuel, water, and utility usage. Assist in swimming pool maintenance, including chemical treatment. Respond to emergency situations and follow safety procedures. Working Conditions Frequent exposure to cleaning chemicals and mechanical equipment. Indoor and outdoor work in varying weather conditions. Requires physical stamina and the ability to handle tasks involving lifting, bending, and climbing. Benefits: Health care insurance benefits available first of the month following 60 days of employment. Thirty (30) hours worked per week must be averaged in order to maintain coverage. 401k enrollment is available per the Secure Act guidelines. Earned Sick and Safe time is accrued and can be used per the State of MN guidelines. #IND345

Benefits: Crown offers a generous starting wage of $31.03, 401K, employee stock purchase plan, pension plan, a tuition reimbursement program for all employees, and more! Crown's comprehensive benefits include FREE company paid health insurance (medical, dental, vision, prescription coverage) for all employees. Second shift is offered a 45-cent differential and third shift is offered a 40-cent differential. This a a progression job, with increases after every 1,000 hours worked. Job Accountabilities: The Maintainer will be responsible for setting up, adjust, repair, overhaul, perform preventive maintenance, quality adjustment checks, and evaluate can line equipment as required to maintain standard quality and quantity production. Has primary responsibility for safe mechanical performance of line and standard production output. Disassemble, replace, reassemble, inspect, and maintain assigned machinery and equipment as required. Measure and record all can dimensions against specifications. Maintain records of production, quality and other related records as directed. Troubleshoot mechanical issues; perform mechanical repairs and maintenance for production equipment. Has primary responsibility for safety for all areas of assigned duties. The successful candidate will be required to complete an 4,000-hour training program to be fully qualified as a Maintainer. Extensive on-the-job-training (OJT) will be provided. About Crown: CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture, and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers, and consumers alike. With operations in 47 countries employing over 33,000 people and net sales of over $11 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated, and driven individuals. Division Overview: Crown's Closures, Aerosol & Promotional Packaging (CAPP) Division manufactures a variety of packaging solutions for the largest consumer packaging companies in North America. Our distinguished list of clients including SC Johnson, Abbott Laboratories and Unilever. We manufacture total packaging solutions including: Closures: We manufacture a variety of decorative food and metal vacuum sealed closures, metal and composite closures, capping systems for glass and plastic container manufacturers. Aerosol Packaging: We manufacture cans and ends for manufacturers of personal care, food, household and industrial products. We offer our customers a broad range of products including multiple sizes, color schemes and shaped packaging. Promotional and Specialty Packaging: We manufacture a wide array of decorative containers with numerous lid and closure variations. Here is your chance to join the CAPP Division. Job Requirements* Must be 18 years or older. Ability to stand, bend, twist, reach, push, pull and regularly lift between 10 lbs. - 50 lbs. Stand at workstation for duration of scheduled shift, which may exceed 8 hours per day. Ability to perform basic math. Ability to proficiently read, write, speak, analyze, interpret, and understand the English language. Ability to work all assigned work schedules and comply with all time and attendance policies. Ability to work in varying temperatures and noise levels. Ability to work cooperatively with others. Must have verifiable mechanical, technical aptitude and experience. Must pass basic Ramsay Mechanical Aptitude Test. Must pass basic Minimizer Test. Must have ability to read and utilize micrometers, vernier calipers, etc. Must be motivated and prepared to participate in S.P.C. projects and functions. Satisfactory progress during progression schedule is necessary for continuation in the training program. Performance will be evaluated at 1,000-hour intervals by the employee's immediate supervisor.

Facilities Maintenance/Operations Engineer (Nights) - $1,500 Signing Bonus (251499) Hennepin Healthcare is an integrated system of care that includes HCMC, a nationally recognized Level I Adult Trauma Center and Level I Pediatric Trauma Center and acute care hospital, as well as a clinic system with primary care clinics located in Minneapolis and across Hennepin County. The comprehensive healthcare system includes a 473-bed academic medical center, a large outpatient Clinic & Specialty Center, and a network of clinics in the North Loop, Whittier, and East Lake Street neighborhoods of Minneapolis, and in the suburban communities of Brooklyn Park, Golden Valley, Richfield, and St. Anthony Village. Hennepin Healthcare has a large psychiatric program, home care, and operates a research institute, philanthropic foundation, and Hennepin EMS. The system is operated by Hennepin Healthcare System, Inc., a subsidiary corporation of Hennepin County. Equal Employment Opportunities: We believe equity is essential for optimal health outcomes and are committed to achieve optimal health for all by actively eliminating barriers due to racism, poverty, gender identity, and other determinants of health. We are committed to equitable care and working in an environment that celebrates, promotes, and protects diversity, equity, inclusion, and belonging. We are committed to bringing in individuals with new cultural perspectives to assist in creating a more equitable healthcare organization. SUMMARY: Hennepin Healthcare has a current opening for a Facilities Maintenance/Operations Engineer in our Facilities department. This full-time position will work nights from 11pm to 7am working ten days on and four days off (every other weekend). Starting pay rate is $39.07 an hour then $41.98 an hour after probationary period. There is also a $1.75 an hour night shift differential and a $1.00 an hour weekend (Saturday and Sunday) differential. A $1,500 sign-on bonus is available for eligible external candidates (contract/temporary workers and former employees returning to HHS within one year are ineligible). Under minimal direction, an employee in this job class performs work of moderate difficulty in the operation and maintenance of a wide range of complex heating, ventilation, air conditioning and refrigeration and/or mechanical and electrical equipment and performs a variety of other moderately difficult electrical and mechanical, building structural, welding and fabrication and general maintenance work; performs related tasks as required RESPONSIBILITIES: Operate and maintain all building systems: HVAC pneumatic and direct digital controls, BAS and VAV systems, A/C units, cooling towers, compressors, emergency electrical power generators, physical heating and cooling plant circulating pumps, ventilation units, refrigeration units, exhaust systems, problems steam PRV stations, and all other related physical plant equipment Operate and respond to pneumatic tube transportation system Repair and operate medical and industrial gases systems: medical air, medical vacuum, oxygen, nitrous oxide, nitrogen, carbon dioxide and welding gases First responder duties for urgent customer requests, life safety, fire, and physical plant system alarm conditions Perform assigned preventive maintenance and corrective repair assignments Read HVAC/Refrigeration control schematics and mechanical blueprints Manage heavy equipment and supplies Perform tasks on portable ladders at varying heights and navigate congested mechanical environments Prepare investigative reports as required for indoor air quality problems Maintain supplies, spare and tool inventory QUALIFICATIONSMinimum Qualifications: Completion of technical college program in Building/Plant Utilities and Maintenance or HVAC Three years of skilled mechanical and facilities maintenance experience or one year of the above experience OR An approved equivalent combination of education and experience Knowledge/ Skills/ Abilities: Must be skilled and experienced in heating, ventilation, air conditioning, refrigeration, electrical, mechanical service and repairs. Technical college program should include coursework in these areas Must be skilled and experienced in HVAC pneumatic, direct digital controls associated with energy management systems, in maintenance and repair of building automation systems Skilled and experienced in pneumatic tube transportation systems is desired Experience in working in an inpatient health care environment is desired Able to read and interpret pneumatic and electric schematics, building blue prints and technical manuals Able to develop and maintain effective working relationships in an organized labor large crew environment necessary Able to orally communicate effectively with customers and to complete written work orders You've made the right choice in considering Hennepin Healthcare for your employment. We offer a wealth of opportunities for individuals who want to make an impact in our patients' lives. We are dedicated to providing Equal Employment Opportunities to both current and prospective employees. We are driven to connect talented individuals with life-changing career opportunities, enabling you to provide exceptional care without exception. Thank you for considering Hennepin Healthcare as a future employer. Please Note: Offers of employment from Hennepin Healthcare are conditional and contingent upon successful clearance of all background checks and pre-employment requirements. Total Rewards Package:We offer a competitive pay rate based on your skills, licensure/certifications, education, experience related to this position, and internal equity.We provide an extensive benefits program that includes Medical; Dental; Vision; Life, Short and Long-term Term Disability Insurance; Retirement Funds; Paid Time Off; Tuition reimbursement; and license and Certification reimbursement (Available ONLY for benefit eligible positions).For a complete list of our benefits, please visit our career site on why you should work for us. Department: FacilitiesPrimary Location: MN-Minneapolis-Downtown CampusStandard Hours/FTE Status: FTE = 1.00 (80 hours per pay period) Shift Detail: Night, Every Other WeekendJob Level: StaffEmployee Status: Regular Eligible for Benefits: YesUnion/Non Union: UnionMin:$39.07Max: $41.98 Job Posting: Aug-27-2025

Ryan Companies US, Inc. has an immediate career opportunity for a Roving Maintenance Engineer to join our team in Minneapolis! This role will be going to and servicing various commercial properties around the Twin Cities. Our Maintenance Engineers are responsible for executing and complete preventative maintenance, demand repairs, general repairs and adjustments to building systems, equipment and fixtures as required to the satisfaction of tenant and building owners. Some things you can expect to do: Perform routine and preventive maintenance on building equipment and systems. Perform or oversee general building systems operations, including boiler, mechanical electrical, plumbing, fire life safety, and elevators. Coordinate and oversee vendor work. Perform general repairs/adjustments to building systems, lighting, and plumbing. Job Requirements: Must have general maintenance experience in the operation of commercial buildings and equipment. High School Degree or equivalent. Participate in on-call, after-hours and weekend rotation. Basic computer skills. Excellent verbal communication skills and a helpful attitude when interacting with building occupants. Valid driver's license, clear driving record, basic knowledge of computer applications and ability to lift 100 lbs. Ability to work from a ladder, work overhead, smell smoke and other chemicals and be able to work outside in a variety of weather conditions. You will really stand out if you have: Have a boiler operator license Have a knowledge of HVAC systems and ability to make needed adjustments and general repairs. Microsoft 365 Software experience. Eligibility: Positions require verification of employment eligibility to work in the U.S. Compensation: The base pay is $28.00 - $38.00 per hour. The base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills and abilities. Position may be eligible for additional compensation that may include commission and/or an incentive program. Benefits: Competitive Salary Medical, Dental and Vision Benefits Retirement and Savings Benefits Flexible Spending Accounts Life Insurance Educational Assistance Paid Time Off (PTO) Parenting Benefits Long-term Disability Ryan Foundation - charitable matching funds Paid Time for Volunteer Events Ryan Companies is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Non-Solicitation Notice to Recruitment Agencies: Ryan Companies kindly requests that recruitment agencies and third-party recruiters do not submit unsolicited resumes or candidate information to any Ryan Companies employee or office. Ryan Companies will not be responsible for any fees or expenses associated with unsolicited submissions. If recruitment services are required, we will reach out directly to agencies on our approved vendor list. We appreciate your understanding and cooperation. For use with REM/RBS Job Family onl Ryan Companies is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Non-Solicitation Notice to Recruitment Agencies: Ryan Companies kindly requests that recruitment agencies and third-party recruiters do not submit unsolicited resumes or candidate information to any Ryan Companies employee or office. Ryan Companies will not be responsible for any fees or expenses associated with unsolicited submissions. If recruitment services are required, we will reach out directly to agencies on our approved vendor list. We appreciate your understanding and cooperation.