Top Maintenance Technician Skills

Below we've compiled a list of the most important skills for a Maintenance Technician. We ranked the top skills based on the percentage of Maintenance Technician resumes they appeared on. For example, 9.1% of Maintenance Technician resumes contained Hvac as a skill. Let's find out what skills a Maintenance Technician actually needs in order to be successful in the workplace.

The six most common skills found on Maintenance Technician resumes in 2020. Read below to see the full list.

1. Hvac

high Demand
Here's how Hvac is used in Maintenance Technician jobs:
  • Performed routine and emergency maintenance calls, painted, repaired drywall safely repaired minor electrical problems including HVAC.
  • Facilitated commercial plumbing, electrical, light HVAC, and carpentry repairs in a laboratory facility environment
  • Handled trouble-shooting and repair of mechanical systems refrigerant recovery and charging of HVAC systems.
  • Maintained high rise commercial building using plumbing, electrical, HVAC and structural repair * Assisted in maintaining boiler and chiller system
  • Maintain plant facility, including Boilers, Chillers, HVAC, plumbing, electrical, water treatment and tank farm building.
  • Provided HVAC expertise for a 750-unit complex, along with adjacent Boys & Girls Club and food pantry on premises.
  • Performed maintenance with plumbing, HVAC, preparing apartments and houses for move-in and move-out, maintained grounds and pool.
  • Diagnose, asses and repair: electrical, plumbing, HVAC, water irrigation, tile, carpet and flooring.
  • Complete work orders, including, but not limited to, plumbing, electrical, HVAC, and appliance issues.
  • Performed safety inspections as part of this procedure as well as maintenance to HVAC and fire systems in family housing.
  • Reduced number of work orders for the property and limited the need to call contractors for HVAC and appliance repairs.
  • Preformed PQ s for new products and routine HVAC filter changes, and also monthly PM s were preformed.
  • Conducted a study of HVAC filters to determine how the district could get the best value for their money.
  • Performed a variety of heating, ventilation and air conditioning (HVAC) and plumbing maintenance and carpentry functions.
  • Performed all areas of repair for housing complex including appliances, plumbing, electrical, and mechanical, HVAC.
  • Installed and replaced general electrical, HVAC, plumbing and performed other duties in warehouse and offices as needed.
  • Provide general maintenance services for rental units including, painting, HVAC, electrical, plumbing, and remodeling repairs
  • Perform routine preventive maintenance and repairs as needed for the purpose of ensuring the ongoing functioning of HVAC systems.
  • Monitor fire alarm systems and respond to alarms HVAC responsibilities-Heat and Air condition problems, Operate boiler plant.
  • Have a working knowledge of HVAC systems and be able to maintain, repair and replace HVAC systems.

Show More

2. Safety Procedures

high Demand
Here's how Safety Procedures is used in Maintenance Technician jobs:
  • Perform preventative maintenance and/or repairs of production and processing equipment as well as utility related equipment, following all safety procedures.
  • Collaborate with team members and supervisor to meet required guidelines according to the general safety procedures.
  • Maintain safety procedures to ensure compliance corporate policies, safety procedures and building access control regulations.
  • Performed administrative duties that included developing power point presentations and documenting and improving safety procedures.
  • Provided training to newly hired mechanics on standard operating procedures, maintenance & safety procedures.
  • Performed preventative maintenance in accordance with specifications and applicable safety procedures to wafer drying equipment.
  • Observed outlined safety procedures in all areas including repairing pipelines through which caustic chemicals flow.
  • Installed and tested new equipment in accordance with manufacture recommendations and standard safety procedures.
  • Responded to scheduled and unscheduled calls trouble shooting and correcting problems implementing all safety procedures
  • Received extensive safety training and adhered to all safety procedures for working in hazardous areas
  • Meet and exceeded work place expectations for safety procedures and cleanliness of maintenance department
  • Followed all safety procedures including using personal safety equipment on a regular basis.
  • Performed all duties according to prescribed safety procedures and use appropriate safety equipment.
  • Reviewed applicable Safety Data Sheets and regularly reviewed lock-out/tag-out and other safety procedures.
  • Followed established safety procedures, use of personal protective equipment and sharps policies.
  • Operate company vehicle and equipment in accordance with policy and safety procedures.
  • Supervised and trained new temporary staff on operating equipment and safety procedures.
  • Ensured proper safety procedures are followed and Personal Protective Equipment is used.
  • Utilized all safety equipment and measures while operating within all safety procedures.
  • Involved member of the safety committee ensuring safety procedures followed throughout facility.

Show More

3. Drywall Repair

high Demand
Here's how Drywall Repair is used in Maintenance Technician jobs:
  • Learned and became proficient at the following handyman skills- Plumbing- Electrical- HVAC- Painting- Drywall repair/installation- Flooring repair/installation
  • Completed carpentry projects, as necessary and performed drywall repair/installation and office remodeling.
  • Completed painting and drywall repair and/or replacement projects as scheduled.
  • Turn over apartments, including extensive drywall repair/replacement.
  • Executed drywall repairs and installation.
  • General maintenance drywall repair basic plumbing
  • Worked independently on apartment make ready, house calls, basement flood outs, drywall repair, and other general maintenance.
  • Preformed building maintenance which included cleaning, plumbing repair, drywall repair, painting and installation of electrical outlets and fixtures.
  • Paint, drywall repair, lock installation, key making and various repairs associated with the upkeep of building inter structure.
  • Job duties also include lawn maintenance, concrete installation, window/door replacement, drywall repair, painting, and fence repair.
  • Make all repairs required in housing, plumbing, drywall repair, electrical, HAVC, numerous floor types installation, painting
  • General maintenance for rental properties, plumbing, painting, drywall repairs, window cleaning, carpet care, and landscaping.
  • Maintain hotel and grounds, including minor electrical, plumbing, HVAC, drywall repair, painting, landscaping and custodial.
  • Performed general maintenance and upkeep of properties such as painting, drywall repair and replacement, changing locks and security hardware.
  • Experience with drywall repairs such as filling in small holes caused by nails and minor dings from normal wear and tear.
  • Light drywall repair, painting, plumbing, light electrical, and small carpentry related activities performed on a daily basis.
  • Repair, re-model, and installing electrical, plumbing, carpentry, HVAC, drywall repair, and lock change-outs.
  • Prepared vacant apartments for next tenants including painting, carpet cleaning, minor drywall repairs, and other repairs as needed
  • Learned quickly and obtained skill needed for electrical, plumbing, heating and cooling, drywall repairs, and flooring.
  • Experienced with drywall & drywall repairs; tiling & grouting; painting; carpeting and light masonry work & repair.

Show More

4. Facility Maintenance

high Demand
Here's how Facility Maintenance is used in Maintenance Technician jobs:
  • Engage in engineering and facility maintenance while assuming weekend engineering management responsibilities of a AAA rated, four-diamond Destination Resort.
  • General automotive parts manufacturing facility Maintenance, installing and maintaining the smooth operation of plant machinery and electrical system.
  • Coordinated restricted area access for facility maintenance and repair personnel, ensuring the highest level of security was maintained.
  • Set up, Maintained, and performed Preventative Maintenance on Automotive Battery production equipment and executed all Facility Maintenance.
  • Record related equipment repair, preventative maintenance, and facility maintenance information into logbooks and/or asset management systems.
  • Shop Maintenance Performing all repair welding and fabrication for production line maintenance as well as production facility maintenance.
  • Provide first line of response to facility maintenance needs to assure maximum operational effectiveness of the facility.
  • Reviewed and updated facility specific standard operation procedures as well as administered the facility maintenance program.
  • Installed new electrical and transformers for sub-panels; performed facility maintenance on electrical and plumbing installations.
  • Worked along other technician and facility maintenance director to ensure the facilities proper working order.
  • Maintained conveyor systems and performed all aspects of facility maintenance including pluming and carpentry.
  • Supervised all maintenance related issues, while managing all machinery and providing facility maintenance.
  • Performed routine maintenance activities such as preventative maintenance, plumbing, and facility maintenance.
  • Changed and programmed Allen Bradley Variable Frequency Drives, performed general facility maintenance.
  • Provide assistance to facility Maintenance personnel as needed, in maintenance/repair of buildings.
  • Direct support for all facility maintenance needs and implementation of required assets upgrades.
  • Follow safety regulations and procedures pertaining to facility maintenance and repair of equipment.
  • Performed general facility maintenance, which included electrical, plumbing and painting.
  • Repaired and installed replacement parts for production equipment and general facility maintenance.
  • Reported problems and assisted with facility maintenance and minor repairs as directed.

Show More

5. PLC

high Demand
Here's how PLC is used in Maintenance Technician jobs:
  • Performed general maintenance operations on pharmaceutical manufacturing equipment including: mechanical/PLC troubleshooting, and monthly preventative maintenance to ensure proper operation.
  • Performed maintenance and repair of semi -automated equipment, PLC-controlled assembly lines.
  • Performed diagnostic and repair activities related to PLC controlled conveying equipment.
  • Perform PLC software/hardware modifications to machinery and controls.
  • Performed troubleshooting electrical and robotic PLC machines.
  • Experienced in PLC troubleshooting/inputs and outputs
  • Work on equipment, Maintain my PM area work on motors, pumps, PLC, weld, plumbing, and Electrical
  • Maintained, troubleshoot and repaired PLC based control systems including replacing sensor, relays, switches, motors, etc.
  • Perform preventive and corrective maintenance on CNC, PLC, mechanical, electrical, pneumatic and hydraulic controlled manufacturing machinery.
  • Managed the project to Configure 20 plus PLC controllers added timers to adjust the time and output of heating elements.
  • Performed electrical repairs and installations, including low voltage (50-600V) and control voltages including PLC's and electronics.
  • Rebuild pumps and motors and roller's trouble shooting PLC, calibrate machines, Maintaining plant water and Air Systems.
  • Performed variety of tasks including electrical troubleshooting, mechanical work, control wiring, PLC troubleshooting, high voltage rewiring.
  • Work with PLC programs to troubleshoot malfunctions in process operations as well as modify those programs to alter processes.
  • Perform all phases of electrical and mechanical trouble-shooting on all types of stamping presses and PLC control assembly lines.
  • Repair and maintain assembly robots and general assembly line, troubleshoot PLC programming, diagnose and repair electrical problems.
  • Maintain and repair semi-automated equipment, PLC controlled assembly lines and performed duties similar to those listed above.
  • Direct responsibility in setting up and testing machines and troubleshooting problems in PLC Allen Bradley electrical panel controllers.
  • Diagnose, Troubleshoot, Repair, and maintain PLC controlled baggage systems, and related components and system.
  • Provided instruction on PLC's, fire suppression systems, HVAC, and computer controlled monitoring systems.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Electrical Systems

high Demand
Here's how Electrical Systems is used in Maintenance Technician jobs:
  • Trained and experience with hydraulic and electrical systems, including all controls, hydraulic actuators, navigational system and stabilization systems.
  • Repaired and serviced air conditioning, heating, engine-cooling, and electrical systems of heavy-duty mobile equipment and refrigerated trailers.
  • Worked on both internal and external electrical systems to include emergency generator circuits, circuit breaker panels and associated wiring.
  • Performed scheduled periodic inspections, preventive and corrective maintenance on representative naval aircraft electrical systems and sub-systems.
  • Maintain, service, and repair emergency electrical generator equipment and electrical systems, including lighting.
  • Performed preventative maintenance on automation machines: hydraulic, pneumatic, and electrical systems.
  • Installed and modified electrical systems/devices in accordance with customer needs and industry standards.
  • Specialized in troubleshooting electrical systems in residential, commercial and industrial environments.
  • Perform troubleshooting, repair and preventative maintenance of electrical systems and components.
  • Tracked operational usage of communication/navigation/electrical systems on U.S. Army Helicopters.
  • Installed and repaired electrical systems, industrial machinery and equipment.
  • Repair and maintenance of production machinery, electrical systems and facility
  • Installed lightning systems and completed improvements on electrical systems.
  • Performed routine electrical troubleshooting of complex housing electrical systems.
  • Repaired carpentry and electrical systems of establishment facility structures.
  • Tested electrical systems and community circuit in electrical wiring.
  • Installed electrical power panels, rewired existing electrical systems.
  • Designed and implemented electrical systems upgrades on aging equipment.
  • Maintained, monitored and repaired electrical systems and motors.
  • Repaired and replaced electrical systems for hydraulic presses.

Show More

7. Air Compressors

high Demand
Here's how Air Compressors is used in Maintenance Technician jobs:
  • Calibrated pneumatic equipment to proper pressure and performed preventive maintenance on air compressors.
  • Operated machinery including standby generator, portable air compressors and portable generator.
  • Serviced hot water, pneumatic/hydraulic systems including high-pressure air compressors.
  • Service and maintain air compressors and ammonia refrigeration system.
  • Serviced and repaired industrial air compressors and co-generation motors.
  • Executed daily operations of air compressors.
  • Performed inspections, tests and maintained fire pumps generators, air compressors, boilers, overhead doors, and loading docks.
  • Function as our lead mechanic as required in the repair of equipment such as mills, lathes, and air compressors.
  • Functioned as lead mechanic as required in the repair of power generating equipment such as boilers, generators and air compressors.
  • Performed maintenance on power plant, boilers, chillers, medical vacuum systems, medical air compressors and medical gas systems.
  • Perform preventative maintenance and correct potential violations on boilers, chillers, medical air compressors, air handlers, and incinerators.
  • Maintained plant equipment such as: air compressors, tower and chilled water systems, HVAC and generator back up systems.
  • Repair and preventive maintenance of equipment which includes; compute saws, hydraulic systems, air compressors and steam systems.
  • Repaired and maintained line shaft bearings, circulation pumps, Low Pressure air compressors, ships main engine reduction gears.
  • Perform daily, weekly and monthly checks of High Pressure Air Compressors and Closed Loop and Open Loop water systems.
  • Inspected and /or repaired industrial air compressors, building motor control systems and a host of other building electrical/mechanical systems.
  • Landscape maintenance Performed lubrication maintenance Repaired, maintained and overhauled mining equipment (pumps, motors, air compressors).
  • Maintained critical systems, breathing air compressors, and refrigerated air dryers, building fire safety alarm and suppression systems.
  • Maintain building operations, HVAC, food processing equipment, coolers and freezers, air compressors and stacked cooling system.
  • Repair, troubleshoot, and installation of machine tools, CNC's, air compressors, and the like.

Show More

8. Preventative Maintenance

high Demand
Here's how Preventative Maintenance is used in Maintenance Technician jobs:
  • Job duties included repair, predictive and preventative maintenance of injection and compression molding equipment in a production environment.
  • Perform required preventative maintenance to all equipment including waste water treatment area, including keeping necessary records.
  • Created and managed preventative maintenance inventory system for all operational systems to solve problems of maintenance neglect.
  • Supervised maintenance technicians in their day-to-day activities based on preventative maintenance program and outstanding work request.
  • Conducted preventative maintenance on electrical equipment and household utilities to ensure proper functioning and cost efficiency.
  • Performed daily inspections on machines and performed preventative maintenance on equipment to ensure production was met.
  • Performed corrective and preventative maintenance on machinery used in the daily production of packaged meats.
  • Performed preventative maintenance inspections and repairs, removed and replaced malfunctioning components of equipment.
  • Performed preventative maintenance and corrective maintenance on sophisticated US Naval short site communication systems.
  • Performed daily, weekly and monthly Preventative Maintenance inspections of systems and associated equipment.
  • Perform preventative maintenance on production equipment Repair production equipment as informed by line leads
  • Assisted in development of plant wide machine specific preventative maintenance procedures and timetables.
  • Established an organized system for filing and maintaining written preventative maintenance work orders.
  • Perform scheduled preventative maintenance on all production and facility equipment as directed.
  • Performed preventative maintenance and repairs to automatic and self-serve car wash equipment.
  • Perform preventative maintenance and work on special projects resulting in improved productivity.
  • Schedule and complete preventative maintenance program and coordinate special projects as directed.
  • Establish and perform preventative maintenance on production equipment and multiple buildings.
  • Conducted ongoing preventative maintenance of related systems to ensure their safety.
  • Perform a variety of preventative maintenance tasks and monthly safety inspections.

Show More

9. Building Maintenance

high Demand
Here's how Building Maintenance is used in Maintenance Technician jobs:
  • Position Profile: Performed preventive building maintenance including electrical wiring, HVAC, and other necessary requirement for running production.
  • Perform semi-skilled positions associated with building maintenance to include plumbing, mechanical, electrical, carpentry and painting.
  • Provided building maintenance services for residential and business customers including snow removal and landscape projects.
  • Worked with several licensed contractors on installation and repair services for complex building maintenance projects.
  • Conduct preventative maintenance, Fulfill building maintenance work orders, oversee contracting operations.
  • Repair and calibration of temperature controls, troubleshooting Furnace Controls and building maintenance.
  • Performed non-structural building maintenance requiring plumbing, pipe fitting and minor electrical repairs.
  • Demonstrated progressive levels of responsibility and professional knowledge of commercial building maintenance.
  • General building maintenance and hospital equipment repair to include specialization in electronics.
  • General building maintenance and repairs for residential, Commercial and institutional buildings.
  • Performed fabrications, welding, electrical wiring and general building maintenance.
  • General building maintenance including electrical installation, fabrication and plumbing repairs.
  • Performed building maintenance including electrical and mechanical insulation and repairs.
  • Performed required building maintenance including plumbing, carpentry and drywall.
  • Communicated with vendors and contractors to facilitate building maintenance projects.
  • General building maintenance including plumbing, carpentry & electrical.
  • Metal fabrication and finishing equipment maintenance, Building maintenance.
  • General building maintenance, cleaning/janitorial duties and ground maintenance.
  • Provided building maintenance on manufacturing and clerical areas.
  • Maintained and operated all machines and performed building maintenance

Show More

10. Hand Tools

high Demand
Here's how Hand Tools is used in Maintenance Technician jobs:
  • Diagnosed mechanical problems performed troubleshooting and repair utilizing power/hand tools.
  • Utilized electrical diagnostic equipment and numerous other hand tools.
  • Performed all preventative maintenance using appropriate hand tools.
  • Used hand tools from saw-saw, cordless handsaw, grinders, drills, chop saw, hydraulic press and welding machine.
  • Led and replaced or repaired defective, worn, or damaged components, using gauges, hand tools and testing equipment.
  • Aligned machines and equipment using hoists, jacks, hand tools, squares, rules, micrometers, and plumb bobs.
  • Utilized small hand tools to complete duties including, hammers, saws, drills, wrenches and all other power tools.
  • Installed and replaced machinery, equipment, and new and replacement parts and instruments, using hand tools and power tools.
  • Operated hand power saws, hand power drills, sanding machines, and use of other hand tools of the trade.
  • Lay out and connect electrical wiring between controls and equipment according to wiring diagram, using electrician's hand tools.
  • Align, fit, and assemble component parts, using hand tools, power tools, fixtures, and templates.
  • Cut out leaking copper piping and replaced, using pipe cutter, bender, hand threaded, and hand tools.
  • Adjusted functional parts of devices and control instruments, using hand tools, levels, plum bobs and straight edges.
  • Use grinders, drill presses, mechanical hand and power tools, electrical gauges and hand tools to perform duties.
  • Repair circuits, wiring, and soldering, using soldering irons and hand tools to install parts and adjust connections.
  • Maintain vegetation on state right of ways; mowing, and using chainsaws, hedgers, and assorted hand tools.
  • Modify and repair parts and equipment using machine shop tooling, welders, cutters, and hand tools as necessary.
  • Experienced use of bush hogs, heavy duty mowers, jack hammers, sprayers, and electrical hand tools.
  • Used basic mechanics hand tools such as wrenches, pliers, socket wrenches, hammers, screwdrivers, etc.
  • Repaired building electrical systems, boiler, water system, HVAC, forklift, electric and pneumatic hand tools.

Show More

11. Production Equipment

high Demand
Here's how Production Equipment is used in Maintenance Technician jobs:
  • Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service.
  • Maintained and troubleshot production equipment and plant mechanical systems for this plumbing and industrial copper tubing manufacturing plant.
  • Repaired production equipment from basic hydraulic equipment to complex CNC machinery, performing both electrical and mechanical work.
  • Decreased downtime of equipment by 5% by implementing and completing proper preventative maintenance procedures of production equipment.
  • Repaired, installed, adjusted and/or maintained industrial production equipment in the manufacturing of automotive climate control systems.
  • Maintained the material handling system and assembly system by performing preventative maintenance requirements on all production equipment.
  • Maintained production and quality by ensuring consistent operation of production equipment utilizing preventative and corrective maintenance methods.
  • Set up and operated production equipment in accordance with current good manufacturing practices and standard operating procedures.
  • Maintained all production lines and minimized downtime; troubleshot and timely repaired highly specialized production equipment.
  • Apply Preventative Maintenance schedules and conduct monthly production equipment evaluations/documentation to minimize downtime and maintain efficiency.
  • Repaired, modified and improved facility and production equipment with proper and precision techniques.
  • Inspected, repaired and maintained functional parts of mechanical production equipment and machinery.
  • Perform preventative maintenance and repairs to high-speed production equipment and related support equipment.
  • Maintain production equipment and facilities maintenance Supervisor for production of industrial type batteries.
  • Ensured daily machine technical records, production equipment and maintenance documentation updated.
  • Develop and implement facility and production equipment predictive and preventive maintenance programs.
  • Performed and documented preventive maintenance for all production equipment and facility equipment.
  • Performed repair and maintenance of plastic injection and plastic heat sealer production equipment
  • Provided technical training to machine operators on new and existing production equipment.
  • Collaborated with the engineering team to adjust and modify production equipment.

Show More

12. Customer Service

high Demand
Here's how Customer Service is used in Maintenance Technician jobs:
  • Maintained excellent customer service by providing professional, prompt and courteous correspondence with renters when scheduling to fulfill maintenance services requests.
  • Delivered quality customer service to apartment complex residents and managers, and timely and cost-effective completion of maintenance projects.
  • Performed customer service activities and quickly resolved service issues resulting in numerous Customer Service Awards and Letters of Appreciation.
  • Communicated effectively with tenants in matters relevant to repairs and provided customer service follow-up with management and tenants.
  • General construction/remodeling/maintenance of residential and commercial properties, transportation of materials and tools, customer service and estimates.
  • Provide exceptional customer service including clear communication, understanding of issue, and provide appropriate and timely solutions.
  • Provided customer service by prompt and courteous correspondence with renters and contracted vendors that provide additional facility services.
  • Overlooked and maintained the facility to ensured equipment was at optimal conditions for operations and excellent customer service.
  • Provide excellent customer service & punctuality, professional demeanor and excellent social skills.
  • Maintained excellent customer service and professional relations with military units contracted to support.
  • Provided exemplary customer service to patrons to ensure a satisfactory golfing experience.
  • Followed up on unresolved customer service issues to ensure successful resolutions.
  • Displayed excellent customer service and developed professional relationships with guests.
  • Deliver these services utilizing well-honed customer service and communication skills.
  • Provided exemplary customer service to military personnel and other contractors.
  • Provide exceptional customer service to both internal and external contacts.
  • Perform general maintenance and grounds keeping - Provide quality customer service
  • Provided customer service regarding the maintenance and programming of analyzers.
  • Handled all Customer Service responsibilities as well as automotive maintenance.
  • Maintained a good customer service and communication with residents.

Show More

13. Light Fixtures

high Demand
Here's how Light Fixtures is used in Maintenance Technician jobs:
  • Saved company money by having electronic ballasts installed in all light fixtures which lowered electricity usage.
  • Ensured electrical equipment operation through installation/maintenance of light fixtures, outlets/switches and most emergency repairs.
  • Replaced or Repaired AC/Heating units, Refrigerators, Stoves, Light fixtures, Toilets, Sinks, etc in the units.
  • Work in turnovers such as replacing receptacles, switches, light fixtures, and doors and knobs, in vacant apartments.
  • Assist in the troubleshooting/repair of mechanical, carpentry and electrical problems change electrical components, ballasts, outlets and light fixtures.
  • Perform general repairs on light fixtures, fans, ice makers, microwaves, lock systems, door hinges, etc.
  • Perform light cleaning duties, change light fixtures, operate and switch oxygen tank Maintain excellent appearance of the location.
  • Repaired of broken wires breakers, replaced electrical plugs, light sockets, new light fixtures and Logo sigh lights.
  • Make all electrical repairs dealing with light fixtures, ceiling fans, switches, outlets, appliances and breaker panels.
  • Light electrical work, changing light bulbs, installing light fixtures, changing electrical ballasts, and changing electrical receptacles.
  • Installed and restored light fixtures, outlets, ceiling fans, water heater, air conditioners and condenser units.
  • Maintain and repair all aspects of facility related equipment, including light fixtures, plumbing, carpentry, etc.
  • Perform routine electrical repairs such as changing light bulbs or fluorescent and assisted in repairing ballast and light fixtures.
  • Dusted offices and public areas including ceiling vents, blinds, hanging light fixtures, cleaned windows in classrooms.
  • Light carpentry, and grooming as well as repair and install light fixtures to enhance appearance of dining area.
  • Repaired appliances, heating, and air conditioning maintenance, replaced light fixtures and plug, drywall and painting.
  • Have experience in redoing bathrooms as well as installing kitchen cabinets, sinks, light fixtures and faucets.
  • Repaired of replaced plumbing fixtures, light fixtures and switches, doors and hardware, windows and screens.
  • Installed and replaced pipe, tubing, large and small motors, chemical dispensers and underwater light fixtures.
  • Maintained equipment in good working order, replaced electrical motors, panels, light fixtures, and plumbing.

Show More

14. Maintenance Tech

high Demand
Here's how Maintenance Tech is used in Maintenance Technician jobs:
  • Collaborated with other Maintenance Technicians in the conceptualization, creation and implementation of a programmable logic controlled steel tube cutting machine.
  • Communicate with management or supervisors to inform them about equipment faults and best maintenance techniques to implement for maximum performance.
  • Participated in on-call emergency rotation as a driver and maintenance technician; conducted emergency repairs during convoy patrols in Iraq.
  • Served as Hull maintenance technician/Storekeeper responsible for welding, carpentry duties, and store inventory and material ordering/issuing.
  • Skilled maintenance technician with emphasizes on providing mechanical and electrical support to a fast pace transmission manufacturing plant.
  • Managed subcontractors, perform construction upgrades and coordinate/interface with internal departments as an owner's representative/construction maintenance technician.
  • Worked in cooperation with other Maintenance Technicians and office personal to facilitate daily objectives.
  • Control downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance.
  • Managed work assignments, availability, and performance evaluations for 24 avionics maintenance technicians.
  • Communicated regularly with all maintenance technicians, good two-way communication concerning any maintenance issues.
  • Served as both maintenance technician and facilities manager in a printing production facility.
  • Worked as a Maintenance Technician, responsibilities included troubleshooting and repair plant/production equipment.
  • Worked as maintenance technician and electrician at aluminum die casting facility.
  • Costumer-oriented Facilities Maintenance Tech, offering a strong management background.
  • Maintained an excellent working relationship with all maintenance technician co-workers.
  • Experienced in predictive maintenance techniques with vibration analysis instruments.
  • Shift maintenance technician for compact disc manufacturing equipment
  • Full maintenance technician for upscale apartment community.
  • Joined company as a machinery maintenance technician.
  • Supervised a professional team of maintenance technicians.

Show More

15. Hydraulic Systems

average Demand
Here's how Hydraulic Systems is used in Maintenance Technician jobs:
  • Generated system isolation tag-out/lock-out procedures for pneumatic, electrical, and hydraulic systems ensuring maximum personnel and equipment safety.
  • Interpreted hydraulic schematics, performed and troubleshot hydraulic systems using common fluid components and implemented safe work practices.
  • Maintained Injection Molding machines including troubleshooting and repair of mechanical, electrical, pneumatic and hydraulic systems.
  • Installed and repaired electrical, pneumatic and hydraulic systems and components of industrial machinery and equipment.
  • Performed preventative maintenance, troubleshooting, and equipment repair on pneumatic, mechanical, and hydraulic systems
  • Handled the responsibilities of checking and troubleshooting all electrical, mechanical and hydraulic systems and subsystems.
  • Programmed Universal and Panasonic auto-insertion equipment and performed preventative maintenance of pneumatic and hydraulic systems.
  • Performed maintenance troubleshooting and repair of hydraulic systems and installation of new machine tooling.
  • Diagnose machine operating problems and maintain hydraulic systems, interpret mechanical and hydraulic drawings.
  • Read and interpreted mechanical and hydraulic systems and troubleshot issues using prints/schematics/drawings.
  • Performed a variety of troubleshooting to electrical and hydraulic systems as necessary
  • Worked with pneumatic and hydraulic systems and consistently focused on safety.
  • Machine Maintenance - Basic Hydraulic Systems - Basic Electricity - Electrical Troubleshooting
  • Perform preventive maintenance on electrical, mechanical and hydraulic systems.
  • Experience in troubleshooting mechanical, electrical and hydraulic systems.
  • Performed general maintenance on pneumatic and hydraulic systems PLC troubleshooting
  • Repaired and maintained hydraulic systems on heavy equipment.
  • Monitored and repaired Mechanical motors and Hydraulic systems.
  • Performed electrical maintenance, pneumatic and hydraulic systems.
  • Repair of hydraulic systems to operate machinery.

Show More

16. Snow Removal

average Demand
Here's how Snow Removal is used in Maintenance Technician jobs:
  • Performed general maintenance of building properties including snow removal, landscaping, interior/exterior painting, cleaning services.
  • Performed snow removal duty when necessary wile driving plows, mustangs and other necessary equipment
  • Operated industrial cleaning machinery, snow removal machinery, and grounds keeping machinery
  • Managed and supervised temporary labor for assigned snow removal tasks.
  • Experience operating snow removal and construction equipment.
  • Snow removal and general maintenance as required
  • Perform snow removal of community sidewalks.
  • Managed grounds and maintenance operations in accordance with general and seasonal requirements such as garbage, debris, and snow removal.
  • Maintain and repairs on all equipment such as zero turn mowers, saws, snow removal vehicles, trucks and trailers.
  • Maintained the outskirts of buildings by mowing, planting flowers, landscaping, snow removal in winter time, etc.
  • Perform plumbing and electrical work, appliance installation and repair, painting, upkeep of grounds, and snow removal.
  • General maintenance including painting, plumbing, heating & cooling, some electrical & operating the vehicle for snow removal.
  • Maintained building and grounds, executed snow removal, and repaired boiler and plumbing systems in 700-unit apartment complex.
  • Completed small drywall, electrical and plumbing repairs, apartment turnovers, general cleaning, painting and snow removal.
  • Worked with Snow Removal Company to make sure the property was safe for residents to leave their apartments.
  • Keep records / prepare reports; inventory; safety; snow removal; counsel corps members; training.
  • Assisted in providing outstanding property maintenance, construction, painting, plumbing, carpentry, and snow removal.
  • Conducted Snow Removal and Salting on roads and parking lots; ensured safety of transportation on company property.
  • Winter season maintenance of sidewalks to include snow removal (snow blowing, shoveling, and salting.)
  • Performed snow removal duties to include the clearing of sidewalks, steps, entrance ways and laid salt.

Show More

17. Mechanical Equipment

average Demand
Here's how Mechanical Equipment is used in Maintenance Technician jobs:
  • Fabricated, modified, maintained, calibrated and adjust electrical and electronic, hydraulic and mechanical equipment for all elevator system.
  • Perform troubleshooting, preventive maintenance and project installation work in the application of instrumentation and controls to high speed mechanical equipment.
  • Maintain all mechanical equipment such as electrical motors, motor controls, water softeners, digital diagnostic equipment and emergency generators.
  • Maintain plant operation Perform routine maintenance on refrigeration and mechanical equipment Inspect safety equipment weekly within the plant.
  • Perform routine and extensive preventative maintenance and repair procedures on multiple buildings, mechanical equipment and utility systems.
  • Maintain and repair all electrical and mechanical equipment for cotton swab and cotton ball machinery including production changeovers.
  • Performed functional testing and provide support to operations by conducting Operator's Training on Mechanical Equipment.
  • Required knowledge in various trade areas and understanding electrical and mechanical equipment used in building systems.
  • Ensured safe operation of machinery and mechanical equipment by completing preventive maintenance requirements on industrial equipment.
  • Identified opportunities to upgrade mechanical equipment and processes resulting in reduced cost and improved system efficiency.
  • Perform preventive and corrective maintenance duties for ALL electrical/mechanical equipment of the entire production system.
  • Position was responsible for designing, implementing, maintaining and improving electrical and mechanical equipment.
  • Perform preventive maintenance on all Electronic, Electrical, Automatic Guided Vehicles and Mechanical equipment.
  • Ensured the operation of machinery and mechanical equipment by completing preventive maintenance and predictive maintenance.
  • Handled maintenance and troubleshooting of residential and commercial areas of the property and mechanical equipment.
  • Conduct preventive maintenance/repairs on all electrical/mechanical equipment; troubleshoot automatic bus transfer (ABT).
  • Serviced crucial mechanical equipment as scheduled, assuring longevity of pumping and chemical feed systems.
  • Conducted preventative maintenance, adjustments, troubleshooting and repaired various electrical and mechanical equipment.
  • Established a preventative/ corrective maintenance program to maintain mechanical equipment in operable conditions.
  • Perform preventative maintenance on electrical and mechanical equipment in accordance with standardized procedures.

Show More

18. Electrical Repairs

average Demand
Here's how Electrical Repairs is used in Maintenance Technician jobs:
  • General home maintenance and repair General rough carpentry Interior Trim Exterior Siding Drywall Installation Minor plumbing and electrical repairs
  • Provided simple to moderate level mechanical and electrical repairs to automated (semi- robotic) textile machinery.
  • Performed maintenance functions in a hospital atmosphere and electrical repairs as necessary(Primarily lighting)
  • Perform calibrations of welding equipment Fabricate equipment for repair duties Electrical repairs of buildings and equipment
  • Performed general electrical repairs on buildings and equipment, ensuring adherence to code requirements.
  • Conducted electrical repairs and new circuit installation and rebuilt electrical motors and gearboxes.
  • Designed and fabricated custom vacuum forming machines, Performed electrical repairs.
  • Performed mechanical and electrical repairs on liquid dispensing and assembly machines.
  • Performed preventive maintenance including plumbing, carpentry and electrical repairs.
  • Performed mechanical and electrical repairs on production machinery and facility.
  • Performed all mechanical and electrical repairs except for front-end alignment.
  • Performed minor electrical repairs including ceiling fans and garbage disposals.
  • Install and regularly maintain vending equipment including mechanical and electrical repairs
  • Perform mechanical and electrical repairs to production line equipment.
  • Facilitated electrical repairs and maintenance crucial to optimizing productivity.
  • Perform electrical troubleshooting, electrical repairs and motor replacements.
  • Performed basic plumbing and electrical repairs and mechanical maintenance.
  • Diagnosed and completed electrical repairs of mail processing equipment.
  • Make mechanical/electrical repairs to ensure production lines run efficiently.
  • Perform electrical repairs and troubleshooting of electrical problems.

Show More

19. MIG

average Demand
Here's how MIG is used in Maintenance Technician jobs:
  • Reviewed income documents, immigration documents, and additional information provided by applicant to determine eligibility.
  • Skilled in all aspects of welding including TIG, MIG, Arc welding, oxygen acetylene torch, and plasma cutting.
  • Called to do most weld jobs for repairs and modifications due to welding experience in MIG, ARC and TIG welding.
  • Preformed brazing, electrical arc welding, oxyacetylene welding and cutting, and MIG/TIG welding on light and heavy gauge metal.
  • Upgraded desktop machines from XP to windows 7 operating systems with migrations tools and USB drives for the SAA employees.
  • Fabricated and repaired vehicle and equipment parts using the oxyacetylene, AC/DC arc and wire feed (MIG) processes.
  • Manufactured and repaired parts using lathe, milling machine, MIG/TIG/ARC welders, and various shop equipment and power tools.
  • Fabricated custom parts for various machines throughout the facility using, Lathe, Mils, Grinders, MIG/TIG/ARK welders.
  • Diagnosed and repaired mechanical electrical and electronic failures on automated LASER, TIG, MIG, and Friction welders.
  • Perform Preventive Maintenance, repair pneumatic and mechanical production equipment, Weld machinery with MIG and stick welding machines.
  • Certified nuclear power plant components and high pressure pipe welder with SMAW, MIG, Brazing and TIG processes.
  • Get in, write how many miles and if it has any service lights on that might be critical.
  • Weld and repair machinery using MIG and stick welding machines along with plasma and acetylene cutting tools.
  • Performed fabrication tasks with a MIG welder, angle grinders, saws all, and chop saws.
  • Lead person in small weld shop that fabricated secure enclosures and other items using MIG welding skills.
  • Can MIG/TIG weld several types of metals to include steel, stainless steel, and aluminum.
  • Fabricated necessary parts for repair machines utilize milling, lathe, welding MIG, TIG equipment.
  • Fill in for fabricators including sheet metal forming, machining, welding (MIG/TIG).
  • Assist other departments and on call 24/7 for problems that might occur in the city.
  • Performed MIG and stick welding for fabrication and repairs, increasing longevity of equipment.

Show More

20. CNC

average Demand
Here's how CNC is used in Maintenance Technician jobs:
  • Performed emergency and preventative maintenance on automated CNC interfaced milling centers and automated panel saws.
  • Automated systems specialist dedicated on maintaining precision movements of various CNC machinery.
  • Leveled and aligned newly purchased CNC machinery for production.
  • Maintained all hydraulic presses, welders, laser & plasma cutters, shears, CNC machines, forklifts and company vehicles.
  • Repair all aspects of the machines; troubleshoot all the components of the CNC machines as well as the mechanical machines.
  • Moved up to the Preventative Maintenance late night shift to PM CNC machines mills and lathes, cutting machines and conveyors.
  • Repaired and rebuilt CNC machines, robots, sensors, spindles, conveyors, gantries, hydraulic components and pneumatic components.
  • Job duties included upkeep of all machines and keeping them in working order; CNC, Lathes, wielding machines.
  • Operate 4 machines producing self-piercing rivet's, troubleshoot and repair machines, exceed daily production numbers, operate CNC machine
  • Align, install, and troubleshooting of computer numerical control, (CNC) lathes, mills and mill turns.
  • Perform crane repairs, rebuild conveyors, welding, CNC and saw rebuilding, and repair forklifts and golf carts.
  • Help develop repair and PM program for CNC, assembly equipment, etc and monitored the activities for on-time completion.
  • Completed general maintenance and REPAIRS ON die cast machinery, melt furnaces, metal finish tumblers, and CNC machines.
  • Diagnose, troubleshooting and repair the malfunction of electrical, mechanical, hydraulic and pneumatic of various CNC machines.
  • Helped achieve company goals by supporting production workers with quality maintenance on all CNC and Manual mills and lathes.
  • Performed daily preventive maintenance, building repairs, forklift repairs, CNC equipment, pneumatic equipment and miscellaneous responsibilities.
  • Access most alarm histories on CNC machines and Analyze input and outputs on PLC controls for their troubleshooting purposes.
  • Set up and programming of CNC machines, including manual lathes, 6 AXIS Mills and Laser Engraving.
  • Maintain, test, and repair CNC equipment Perform pneumatic/hydraulic repair, electrical/electronic component replacements, and wiring.
  • Performed CNC, automation and mechanical repair for the Ford Focus knuckle machining and bearing press lines.

Show More

21. Conveyor Systems

average Demand
Here's how Conveyor Systems is used in Maintenance Technician jobs:
  • Perform routine and preventive maintenance repair and troubleshooting for pneumatic and electric conveyor systems, micro processors and programmable controllers.
  • Facilitated and participated in the complete electrical, mechanical, pneumatic and hydraulic system rebuilding of machines and conveyor systems.
  • Provided technical expertise and guidance for complex equipment including welders, robots and conveyor systems critical to manufacturing success.
  • Perform general maintenance and repair on extensive conveyor systems and automated bailing systems at Holt building production facility.
  • Maintained and serviced all equipment Managed and monitored all conveyor systems, electrical and mechanical systems
  • Perform scheduled preventative maintenance of automated machines and conveyor systems throughout the production facility.
  • Involved with daily electrical and mechanical troubleshooting of conveyor systems.
  • Maintain and repair conveyor systems and machinery of electronics recycling.
  • Perform maintenance & preventative maintenance inspections on conveyor systems.
  • Fabricated conveyor systems and removed and replaced electrical motors.
  • Perform scheduled and unscheduled maintenance on conveyor systems.
  • Performed preventative maintenance on conveyor systems/motors and engines.
  • Maintained and repaired conveyor systems and packaging equipment.
  • Serviced and Repaired Large-Scale Industrial Conveyor Systems.
  • Maintained Automate Conveyor Systems Throughout Facility.
  • Maintain all electrical systems and troubleshooting in distribution center; conveyor systems, backup generators, electrical panels, and lighting.
  • Repaired and maintained semi automated slicers, automated conveyor systems, vacuum and heat sealing systems, and robotic packaging equipment.
  • Automated production & packing machinery, conveyor systems, divert valves, control valves, sensors and chemical dosing units.
  • Worked with food processing equipment, gas fired ovens, proofing systems, conveyor systems, packaging equipment and forklifts.
  • Repaired all conveyor systems and routinely studied new automated conveyor programming to assure a smooth transition as it comes online.

Show More

22. Osha

average Demand
Here's how Osha is used in Maintenance Technician jobs:
  • Certified crane inspector; document safety/deficiencies in accordance with OSHA regulations.
  • Performed building preventive maintenance accordance to OSHA and other requirements.
  • Participated in yearly OSHA inspections resulting in zero discrepancies.
  • Maintained quality and safety standards by following OSHA regulations.
  • Maintained and applied OSHA regulations throughout manufacturing facility.
  • Followed OSHA standards and hazardous material disposal procedures.
  • Completed all necessary certifications per OSHA requirements.
  • Facilitated OSHA safety training for lockout/tag out
  • Performed maintenance and repair of semi-automated equipment, PLC controlled assembly lines and handled all duties in OSHA regulated assembly lines.
  • Maintained cleanliness of particular parts of the plant -Operation of machinery to rid piles on job site -Compliance with OSHA safety regulations
  • Communicated and inspected all safety requirements to ensure all functioning was in accordance with strict corporate standards, EPA and OSHA.
  • Involved in the innovations and improvements to equipment and the facilities that enabled our plant to receive the OSHA Sharp award.
  • Experience in handling hazardous waste collection barrels in accordance with Environmental Health and Safety guidelines and DEC and OSHA guidelines.
  • Have to keep the facility up to OSHA standards at all times and pass monthly inspections for maintenance and cleanliness.
  • Document and record work performed electronically in SAP in conjunction with requirements outlined by the Department of Transportation and OSHA.
  • Led Health, Safety, and Environmental team in compliance with OSHA regulations; trained new hires in HSE requirements.
  • Maintained a safe work environment by following the ISO standards in equipment and following safety rules laid down by OSHA.
  • Worked with the Environmental Health and Safety group to make the hazardous waste collection barrels/areas DEC and OSHA compliant.
  • Maintained work environment and kept areas neat and clean, and followed 5S procedures, along with OSHA Safety Standards
  • Assume responsibility for compliance with federal, state and local regulations as well as OSHA standards within the facility.

Show More

23. New Equipment

average Demand
Here's how New Equipment is used in Maintenance Technician jobs:
  • Work closely with engineers and designers promoting safety and maintainability when purchasing or creating new equipment or upgraded obsolete systems.
  • Perform electronic machine repair and non-routine maintenance, including replacing electrical motors and components, wiring and installing new equipment.
  • Trained and guided equipment operators on different processes and techniques including training in operations of new equipment.
  • Project Maintenance- Work with production and maintenance engineers to perform modifications to equipment and new equipment installations.
  • Inspected new equipment for proper functionality and safety exposures, and reviewed documentation for completeness/accuracy.
  • Worked closely with Engineering contractors on design and implementation of new equipment or station redesign.
  • Participate in new equipment start-up to ensure it meets all operational requirements and parameters.
  • Overhaul and install new equipment, Generated and completed repair requisitions on assigned equipment.
  • Engineered and designed custom equipment including modifications to new equipment to suit manufacturing needs.
  • Update all associated documentation for installations, inventory new equipment, and telecommunication infrastructure.
  • Provided assistance and support to equipment vendors during equipment modification and new equipment installations.
  • Assist Engineering department in design and implementation of new equipment processes and improvements.
  • Rewired a motor control cabinet to reflect new equipment configuration and programming needs.
  • Established and maintained lubrication schedule for existing equipment and any new equipment.
  • Designed and fabricated new equipment to aid increased safety and efficiency.
  • Participated in equipment modification projects, new equipment installation and debug.
  • Recommended new equipment and maintenance procedures to the facility manager.
  • Assisted on multiple new equipment installations and occasional machine building projects
  • Diagnose faulty network hardware and install/configure new equipment.
  • Installed and implemented new equipment into production.

Show More

24. Maintenance Mechanic

average Demand
Here's how Maintenance Mechanic is used in Maintenance Technician jobs:
  • Performed general Maintenance Mechanic tasks which included any activity needed for maintaining the plant facilities and equipment.
  • Surface Maintenance Mechanic was responsible for approximately 20 vehicles, and trailers scheduled and non-scheduled maintenance.
  • Continue to accomplish responsibilities of Maintenance Mechanic 2 while providing client satisfaction and assuring safety.
  • Promoted to Journeyman Maintenance Mechanic after completion of Wisconsin State Certified Apprenticeship First 1982.
  • Steel mill maintenance mechanic assess and repair necessary equipment used to run the day-to-day production
  • Worked as an entry level maintenance mechanic in an automated distribution facility.
  • Zone maintenance mechanic overseeing maintenance problems for designated areas of the hospital.
  • Process maintenance mechanic supporting daily production demands in a high speed environment
  • Supervised maintenance mechanics, and developed an effective preventative maintenance plan.
  • Attained Journeyman Maintenance Mechanic status through a State indentured Apprenticeship.
  • Promoted to Maintenance Mechanical Technician within four months of employment.
  • Train other maintenance mechanics in ammonia refrigeration/ HVAC/ boiler operations.
  • Supervised 10 Vehicle maintenance mechanics and 5 Power Generation mechanics.
  • Performed tasks assigned as Current Position as a Packaging Maintenance Mechanic
  • Promoted within the company to Maintenance Mechanic from Fabricator Position
  • General production maintenance mechanic duties to keep equipment productive.
  • Lead maintenance mechanic providing work direction and task allocation.
  • Cross train maintenance mechanics in electrical troubleshooting techniques.
  • Delegated workload and developed skills of Maintenance Mechanics.
  • Provide general supervision of six maintenance mechanic personnel.

Show More

25. Production Machines

average Demand
Here's how Production Machines is used in Maintenance Technician jobs:
  • Assisted in recommending improvements for maintenance and assembly personnel on newly build automation production machines, prior to receiving from manufacturer.
  • Ensured operation of machinery by completing preventative maintenance requirements on motors, pneumatic and electrical operating systems, and production machines.
  • Perform preventative and predictive maintenance to maintain industrial electrical/mechanical machinery, conveyor systems, and production machines and equipment.
  • Provided preventive maintenance, problem solving and repair of facilities machinery and mechanical equipment including all production machines.
  • Performed mechanical service including electrical, pneumatic and hydraulic troubleshooting and repaired of packaging and production machines.
  • Maintained all packaging line production machines as well as encapsulation and mixing equipment that produces pharmaceutical products.
  • Remove, replace and repair automatic or semi-automatic production machines, robotic equipment and maintenance equipment.
  • Performed necessary preventive maintenance and repaired breakdowns on finishing and dying production machines and equipment.
  • Performed preventative maintenance on all production machines including fabrication of parts using machine shop equipment.
  • Adjust production machines and related equipment according to maintenance schedule and manufacturer's service manuals.
  • Perform preventative and scheduled maintenance activities on production machines, facility equipment and forklift.
  • Performed preventative maintenance and employed troubleshooting skills on repairs for magnet wire production machines.
  • Instructed equipment operators on proper daily maintenance and cleaning procedures of production machines.
  • Provide routine mechanical and hydraulic repair on production machines, forklift operator.
  • Fabricated parts and preformed periodic maintenance on production machines and plant facilities.
  • Perform preventive maintenance and general repairs of agricultural equipment and production machines.
  • Conserved and Supported production machines; conveyors, packaging and homogenization machines.
  • Work with other maintenance personnel upgrading existing printing and production machines.
  • Devised enhancements for production machines to eliminate causes of repeat problems.
  • Planned and implemented a preventative maintenance program for all production machines.

Show More

26. TIG

average Demand
Here's how TIG is used in Maintenance Technician jobs:
  • Collaborated with Park management in selecting appropriate actions to correct deficiencies based on inspections/audit findings and accident and near-miss incident investigations.
  • Researched and investigated new and improved maintenance related operations and procedures to drive quality assurance and identify / address operational deficiencies.
  • Controlled noxious or undesirable vegetation through chemical, manual, or mechanical applications on forty mitigation sites throughout western Washington.
  • Implemented investigation of defective machinery to categorize whether machinery should be repaired or replaced within Capital Improvement Budgets.
  • Investigated problems and performed repairs on various mechanical and electrical equipment in heating, cooling and ventilation systems.
  • Assist with investigations, problem analysis, and developing logical and documented recommendations for repair of machinery.
  • Exercised administrative authority over multiple tiger teams and was overall responsible for the quality of work completed.
  • Used statistical analysis techniques, in order to identify loss issues that were subsequently investigated and resolved.
  • Disassembled commercial units to investigated major malfunctions and breakdowns of heating, refrigeration and air-conditioning systems.
  • Prepared maintenance and attendance reports for superintendent ensuring full compliance with agency requirements and tight deadlines.
  • Investigate operational reports of equipment failures and analyzing system characteristics to determine cause of failure.
  • Provide technical assistance in investigating equipment issues, develop necessary materials list and labor requirements.
  • Adjusted accounts or referred escalated problems to supervisor or appropriate department for further investigation.
  • Maintained and repaired structural shipboard equipment and plumbing systems to ensure watertight integrity.
  • Investigated major malfunctions and breakdowns of heating, refrigeration and air- conditioning systems.
  • Conducted safety inspections and audits, incident investigations, data tracking and reporting.
  • Investigate quality concerns noted by final line inspection and immediately correct problems.
  • Investigate, propose and implement maintenance activities and projects to improve profitability.
  • Audited, monitored and set equipment to tight engineering specifications and standards.
  • Worked closely with the Property Manager to mitigate property damage situations.

Show More

27. Vacant Units

average Demand
Here's how Vacant Units is used in Maintenance Technician jobs:
  • Prepare vacant units for occupancy in coordination with vendors; report immediately any safety and/or security problems to Property Manager.
  • Prepared vacant units for occupancy, by making necessary repairs or improvements.
  • Completed maintenance service requests as assigned including make ready vacant units.
  • Maintained apartment complex units and prepared vacant units for occupancy.
  • Job responsibilities included overseeing all renovations of vacant units.
  • Complete refurbishment of vacant units according to remodel schedules.
  • General repair and upkeep of occupied/vacant units.
  • Perform maintenance on vacant units for re-occupancy.
  • Complete all duties regarding make-ready/vacant units.
  • Conducted turnover maintenance of vacant units.
  • Prepared vacant units for occupancy.
  • Renovated and secured vacant units.
  • Inspect all aspect of property; grounds, building, vacant units, as part of preventive maintenance and curb appeal.
  • Make vacant units ready for move in by completing a check list of items that need to be in working order.
  • Turn vacant units, including painting, pulling floors (when needed) and any other maintenance issues that need addressed.
  • Performed other duties such as painting, servicing golf carts, maintenance inspection on vacant units and conducted repairs needed.
  • Repaired vacant units, picked up grounds, maintenance request, trashed out units, also did preventative maintenance around property
  • Perform maintenance for apartment complex, including preparation of vacant units for occupancy and completion of residents' service requests.
  • Refurbish all vacant units to prepare for occupancy * Monitor conditions of main plumbing units, heating and electrical systems.
  • Inspect and prepare vacant units including the scheduling of the required resources as to make the unit market ready.

Show More

28. Heavy Equipment

average Demand
Here's how Heavy Equipment is used in Maintenance Technician jobs:
  • Perform a variety of maintenance tasks utilizing various tools and heavy equipment in a high-performance industrial pipe facility.
  • Performed necessary mechanical work, fabricate weld and maintain machinery to maintain production in industry operated heavy equipment.
  • Repaired heavy equipment, performed maintenance and repairs to conveyors and fertilizer loading equipment.
  • Performed preventative maintenance on heavy equipment and automobiles for a commercial concrete construction company.
  • Performed corrosion preventative maintained and repaired specific aqua farming equipment and heavy equipment.
  • Performed preventive maintenance, evaluated, diagnosed and repaired machinery and heavy equipment.
  • Respond to emergency repairs as required utilizing appropriate heavy equipment for restoration.
  • Supervised repairs and preventative maintenance on all company vehicles and heavy equipment.
  • Supervised vehicle recovery operations and lifting heavy Equipment using Material Handling Cranes.
  • Operated various types of heavy equipment safely in observance of standards and specifications
  • Perform maintenance and preventative maintenance of vehicles and operate heavy equipment.
  • Assist heavy equipment operators to secure special attachments to equipment.
  • Performed maintenance on heavy equipment and fabricated water trucks.
  • Assisted troubleshooting and performing proper repairs to heavy equipment.
  • Performed preventative maintenance on all machinery and heavy equipment.
  • Used heavy equipment to transport larger machinery as necessary.
  • Diagnosed and repaired hydraulics on heavy equipment.
  • Maintain safety requirements of heavy equipment.
  • Performed mechanical maintenance on heavy equipment.
  • Completed routine maintenance on heavy equipment.

Show More

29. Water Heaters

average Demand
Here's how Water Heaters is used in Maintenance Technician jobs:
  • Repaired, installed, adjusted and/or maintained industrial production equipment in the manufacturing of gas and electrical water heaters.
  • Experienced in general plumbing and electrical, excellent at troubleshooting problems including gas/electric water heaters.
  • Repaired and maintained gas powered heaters and in-apartment water heaters.
  • Performed quality inspections and troubleshooting on hot water heaters.
  • Monitored the maintenance and up keep of all mechanical equipment including, but not limited to water heaters and HVAC units.
  • Completed work orders for broken or faulty water heaters, requests for replacement fixtures, and minor and some major repairs.
  • Responded to work orders within twenty-four hours while efficiently repairing and replacing fixtures, water heaters, and troubleshooting AC units.
  • Replaced and repaired gas and electric water heaters, toilets, sinks, showers, urinals drinking fountains, and re-pipes.
  • Repaired and replaced parts for small engines, motors, equipment, doors, locks, pumps, and water heaters.
  • Performed plumbing-related activities, including replacement of toilets, tubs, vanities, fixtures, and gas hot water heaters.
  • Replace angle stops, supply lines, water heaters, faucets, parts, cartridges, shower hardware, etc.
  • Fixed and installed water heaters, furnaces, counters, floors, and installed outlets and lights to the mudrooms.
  • Perform preventative maintenance inspections and testing of such items as water heaters, smoke detectors, and fan coil units.
  • Repair and replacement of gas and electric water heaters as well as diagnosis and minor repair of gas furnaces.
  • Perform basic maintenance: Painting, patching drywall, replacing light fixtures, plumbing fixtures, and water heaters.
  • Installed range hoods, bathroom sinks, mirrors, garbage disposals, water heaters, cabinets and counter tops.
  • Repair or replace doors, jambs, molding & trims, vinyl flooring, hot water heaters as needed.
  • General plumbing i.e., replacement of fixtures, clogs, replace water lines, shut-off valves and water heaters.
  • Repaired and maintained the following: hot water heaters, a/cs, plumbing Experienced in installation, electrical repair.
  • Provided rental assistance to tenants in reference to Hot water heaters, dishwashers, refrigerators and other household appliances.

Show More

30. Maintenance Tasks

low Demand
Here's how Maintenance Tasks is used in Maintenance Technician jobs:
  • Performed scheduled preventive maintenance tasks and repairs for computerized maintenance management system that met ISO-9000 standards and documented results.
  • Performed various routine vehicle maintenance tasks such as oil change, tire rotation/mount/balance, brake/transmission/power steering/AC/cooling system/tune up/diagnostic service.
  • Coordinate maintenance tasks to work with all aspects of production while improving efficiency and minimizing operation downtime.
  • Perform difficult preventive general maintenance tasks involving carpentry, electrical, plumbing and mechanical skills.
  • Performed critical maintenance tasks necessary to maintain 50 Peacekeeper ICBMs and associated equipment and subsystems.
  • Performed maintenance tasks in occupied retail / commercial buildings as directed by property management.
  • Perform preventive maintenance tasks and corrective maintenance tasks on robotic assembly and processing equipment.
  • Performed assigned preventive maintenance tasks, performs schedule maintenance on plant equipment and machinery.
  • Perform preventative maintenance tasks on plant equipment, machinery and related facilities.
  • Preserved high standards of accuracy and perfection while performing scheduled maintenance tasks.
  • Performed maintenance tasks on electrical and plumbing equipment and fire rehabilitation services.
  • Performed scheduled preventative maintenance tasks on the production and ancillary support equipment.
  • Performed general maintenance tasks including plumbing, electrical, grounds keeping/maintenance.
  • Perform repairs, equipment upgrades/installations, and preventive maintenance tasks as needed
  • Performed maintenance tasks that were purposed for successful renovation repairs.
  • Performed routine and preventative maintenance tasks on equipment and machinery.
  • Identified irregularities or flaws and performed maintenance tasks as required.
  • Perform scheduled preventative maintenance tasks and demand maintenance as required.
  • Documented maintenance tasks, implemented corrective measures and improvements to equipment
  • Completed general maintenance tasks to help the university run efficiently.

Show More

31. Pneumatic Systems

low Demand
Here's how Pneumatic Systems is used in Maintenance Technician jobs:
  • Performed maintenance on all equipment in factory Completed diagnostics of mechanical, electrical, and pneumatic systems Performed various maintenance duties
  • Performed scheduled and unscheduled maintenance on gas and chemical distribution systems, to include electrical and pneumatic systems and components.
  • Disassembled axial-flow and centrifugal compressors, repaired micro-filtration units and various production components, including hydraulic and pneumatic systems.
  • Performed scheduled equipment inspections and preventative maintenance of mechanical, electrical, hydraulic and pneumatic systems in manufacturing environment.
  • Log data of airport chiller plants/cooling towers/boilers/pneumatic systems, review conditions and trends and adjust operating parameters accordingly.
  • Demonstrate high level preventative maintenance, troubleshooting and repair skills for mechanical, electrical and pneumatic systems.
  • Perform routine preventive maintenance, troubleshoot all malfunctions involving mechanical electrical, hydraulic or pneumatic systems.
  • Provided major maintenance and repairs including trouble-shooting production machinery, PLC and pneumatic systems.
  • Used technical manuals, knowledge and Schematics to troubleshoot mechanical hydraulic electrical pneumatic systems.
  • Performed troubleshooting and repair of electrical, hydraulic and pneumatic systems and equipment.
  • Experienced in hydraulic and pneumatic systems with a basic knowledge of electrical/electronics.
  • Maintained process control equipment including electrical, hydraulic, and pneumatic systems.
  • Programmed and troubleshooted electrical systems, hydraulic systems and pneumatic systems.
  • Provided daily maintenance on all warehouse machines including Hydraulic and Pneumatic systems
  • Managed maintenance and repair of environmental chamber and pneumatic systems.
  • Perform preventative maintenance on equipment including hydraulic and pneumatic systems.
  • Worked with schematics for electrical hydraulic and pneumatic systems.
  • Monitored, calibrated and repaired of existing pneumatic systems.
  • Performed maintenance on electrical, mechanical and pneumatic systems.
  • Associated equipment including hydraulic/pneumatic systems, and electrical/electronic systems.

Show More

32. Plant Operations

low Demand
Here's how Plant Operations is used in Maintenance Technician jobs:
  • Performed Preventive Maintenance and troubleshot and repaired broken/malfunctioning machinery to ensure little to no delays in plant operations.
  • Work with engineers to keep packing machinery operational while plant operations were being downsized and eliminated.
  • Collaborate with multiple plant departments to conduct strategic maintenance planning/repairs with minimal interruptions to plant operations.
  • Maintained all equipment vital to plant operations including pneumatic, hydraulic, welding and electrical equipment.
  • Developed preventative maintenance program for plant operations and assisted in starting autonomous maintenance and management practices.
  • Power plant operations, electrical/mechanical maintenance and repair of generators, engines, and facilities.
  • Fabricate and install replacement components for equipment as to maintain production schedules and plant operations.
  • Report directly to supervisor with regard to any matters needing attention involving daily plant operations.
  • Ensured continuous plant operations by executing industrial maintenance functions for a manufacturer of aerospace fasteners.
  • Prepared reports and made recommendations for improving plant operations and solving maintenance related problems.
  • Assist with plant operations and perform regularly scheduled and unscheduled maintenance on industrial equipment.
  • Provide support to all plant operations and expertise/training to coworkers in welding/robotics/design/fabrication.
  • Specialized in Commercial maintenance in high volume and manufacturing plant operations.
  • Conducted training and monitored plant operations of production with machines operators.
  • Maintain daily plant operations including scheduled and unscheduled preventative maintenance.
  • Repair and maintain related equipment necessary for efficient plant operations.
  • Performed electrical troubleshooting to ensure smooth plant operations.
  • Maintain Facility support for carbon plant operations.
  • Provided technical support to plant operations.
  • Maintain plant operations during production.

Show More

33. Trouble Shooting

low Demand
Here's how Trouble Shooting is used in Maintenance Technician jobs:
  • Performed all electrical maintenance and trouble shooting of machinery and facility including all aspects of general maintenance.
  • Repaired equipment breakdowns and recovered equipment errors using basic trouble shooting knowledge.
  • Performed mechanical and pneumatic trouble shooting on manufacturing and related production equipment.
  • Performed trouble shooting of electrical and mechanical systems to minimize downtime.
  • Trouble shooting mechanical and electrical equipment and provide preventive maintenance.
  • Trouble shooting electrical and mechanical defects for residential sites.
  • Trouble shooting electrical and mechanical defects.
  • Performed preventive maintenance and trouble shooting on all equipment to make sure the equipment was running correct on a daily basis.
  • Repaired production, process, general facility, and utility equipment using trouble shooting tools, i.e., root cause analysis.
  • Included activities are preventive maintenance, equipment trouble shooting, spare parts ordering and inventory, and small physical property repairs.
  • Assigned to trouble shooting and repair A/C electric Hydraulic, Pneumatic and Mechanical systems during production run times and off shifts.
  • Trouble shooting and repair of electrical / mechanical systems on a variety of metal bonding, forming and stamping equipment.
  • Process manufacturing plastic bags for food industry, installation and repair, Trouble shooting all aspects of high speed equip.
  • Excelled in trouble shooting issues to get to the root cause of the problem and knowing how to fix it.
  • Operate powder filling lines, provided maintenance, trouble shooting and trained staff on proper operation of powder filling lines.
  • Completed installation, upgrading, repair, and diagnostic trouble shooting of equipment in a safe and efficient manner.
  • Trouble shooting and repair of HVAC units, plumbing, electrical, lock repairs and finish / repair carpentry.
  • Trouble shooting R.F., hydraulic, pneumatic, and electrical/electronic using oscilloscopes, signal generators, amp and voltmeters.
  • Trouble shooting, mechanical and electrical on conveyors, dryers, washer, water systems and assisting fleet mechanic.
  • Provide trouble shooting capabilities for HVAC, electricity, and plumbing; complying with regulatory standards for workplace safety.

Show More

34. Grounds Maintenance

low Demand
Here's how Grounds Maintenance is used in Maintenance Technician jobs:
  • Performed general maintenance and repairs on facility equipment and property structures, in addition to performing grounds maintenance.
  • Implemented increases in efficiency and productivity through oversight of grounds maintenance program.
  • Assisted in building and grounds maintenance and participated in community Adopt-A-Block program
  • Perform general facilities and grounds maintenance and security functions.
  • Performed all interior/exterior building and grounds maintenance duties.
  • Provided machinery, facility and grounds maintenance.
  • General Facility/ grounds maintenance and upkeep.
  • Performed general grounds maintenance and landscaping.
  • Provided grounds maintenance including landscaping.
  • Clean and detail customers' motorcycles, lawn and grounds maintenance, stock shelves, help mechanics, and maintain office areas
  • Oversee all aspects of property maintenance, including building interior/exterior, current tenant service orders, and all seasonal grounds maintenance.
  • Report to management and work in a team environment other duties include grounds maintenance and daily pool clean/check keep logs current.
  • Performed the following maintenance duties: building and grounds maintenance, light plumbing, drywall repair, lighting and interior painting.
  • Developed maintenance skills on the Hudson Township Parks grounds maintenance team responsible for maintaining and managing thirteen parks within city limits.
  • Ground Maintenance: Performed various grounds maintenance tasks, including: maintenance and repair of various grounds power equipment and tools.
  • Helped in the repair and maintenance of gasoline powered and tractor drawn lawn mowers and other types of grounds maintenance equipment.
  • Valet, grounds maintenance, forklift operation, and new car delivery as well as minor vehicle repair and maintenance.
  • Experienced in painting, plumbing, electrical, tile work, grounds maintenance, minor heavy equipment maintenance and construction.
  • Work experience in building maintenance such as plumbing, HVAC, carpentry, electrical, painting, and grounds maintenance.
  • Perform grounds maintenance clearing debris from parking lots, green spaces, and gravel areas to improve appearance and symmetry.

Show More

35. Gear Boxes

low Demand
Here's how Gear Boxes is used in Maintenance Technician jobs:
  • Developed and implemented preventative maintenance program for all gear boxes within facility.
  • Job duties include- Changing tooling in presses, rebuilding presses, replacing gear boxes, motors, conveyors and conveyor belts.
  • Installed new equipment such as motors, reducing gear boxes, conveyor belts 3 to 24 due to wear or damage.
  • Programmed ans maintained PLC's and PLU's, installed, repaired and replaced motors, drive switches and gear boxes.
  • Dismantled, repaired and re-assembled gear boxes, fans, conveyors, compressors, pumps, valves and all mechanical equipment.
  • Replace Hydraulic Cylinders, Electrical Wiring, Change Gear Boxes, Change Out Motors, Over seen and Maintained All Equipment.
  • Repair of food machinery, packing machine conveyors line systems, gear boxes, bearing systems, and stainless steel welding.
  • Worked with high-pressure steam, assorted plumbing systems, aerosol machinery, compression molding, conveyors, gear boxes, chains.
  • Make machine modifications including: relocating process piping lines, change gear boxes and motors, and installing new temperature controllers.
  • Rebuild and repaired Gear Boxes, Pumps (lobe, geared, and double diaphragm) and other various items.
  • Repair, assemble/ disassemble mechanical systems; gear boxes, chains, sprockets, motors, seals, and bearings.
  • Maintained, repaired, and overhauled various gear boxes, change out internal gears, shafts, bearings and seals.
  • Fabricate parts and machinery by welding, cutting, grinding and attaching motors and gear boxes and wiring of components.
  • Maintained, lubricated and rebuild distilled water unit, pumps, motors, fans, mechanical seals and gear boxes.
  • Job duties include making repairs to pumps, gear boxes, electric motors, mowing and making repairs to all equipment
  • Trouble shoot and repaired cranes, heavy duty conveyor systems, gear boxes, pumps, and all custom equipment.
  • Repair or rebuild various plant equipment, such as pumps, valves, gear boxes, and conveyor systems.
  • Rebuild, maintenance, repair gear boxes, and fabricate and install, as well as repair piping systems.
  • Maintained belt conveyors, chain conveyors, gear boxes, ingredient pumps, mixers and various other bakery equipment.
  • Replace bearings, v-belts, round belts, rollers, motors and gear boxes so conveyors are always running.

Show More

36. Building Systems

low Demand
Here's how Building Systems is used in Maintenance Technician jobs:
  • Perform preventative maintenance to ensure machines run smoothly, building systems operate efficiently and appliances worked safely in every unit.
  • Performed routine preventative maintenance to ensure building systems operated efficiently Met production goals by maintaining cost effective levels of inventory.
  • Performed routine preventive maintenance to ensure that building systems operated efficiently in conformance with all product specifications.
  • Skilled in configuring software for rebuilding systems and operational software for to optimize application.
  • Performed repairs and preventive maintenance on building systems and equipment per regulatory requirements.
  • Completed preventative maintenance inspections on fitness equipment and building systems at two locations.
  • Assured proper contracted inspections and documentation of applicable building systems and equipment.
  • Performed preventive and reactive maintenance on production equipment and building systems.
  • Perform routine preventative maintenance to building systems for optimal efficiency.
  • Performed routine preventative maintenance to ensure building systems operated efficiently.
  • Preformed preventative maintenance on all building systems and validated equipment.
  • Worked hands on with commercial electrical systems and building systems/automation.
  • Repaired building systems and assisted with renovation of apartment.
  • Maintain building systems including catalytic oxidizer for pollution control.
  • Performed scheduled/preventive maintenance and repairs for major building systems.
  • Maintained general building systems, including plumbing and electrical.
  • General maintenance services and routine check-up of building systems
  • Monitored and adjusted controls that regulate building systems.
  • Monitor building systems to verify they operate efficiently.
  • Monitored and maintained building systems.

Show More

37. Mechanical Problems

low Demand
Here's how Mechanical Problems is used in Maintenance Technician jobs:
  • Used schematics and blueprints to troubleshoot electrical and mechanical problems with equipment as well as equipment modifications.
  • Performed troubleshooting and repair of all plant equipment including electrical, electronics, and mechanical problems.
  • Communicate with production management and personnel to diagnose problems and to determine potential mechanical problems.
  • Assess damages and troubleshoot electrical and mechanical problems to resolve before shipping to contingency areas.
  • Diagnosed and repaired electrical, electronic, hydraulic, and mechanical problems on installed machinery.
  • Diagnosed and repaired electrical and mechanical problems, ordering spare and replacement parts when necessary.
  • Diagnosed mechanical problems and determined how to correct them, utilizing blueprints, manufacturing manuals.
  • Demonstrated proficiency in accurately diagnosing and repairing mechanical problems on multiple compressor engines.
  • Repair Electrical/Mechanical issues on equipment* Troubleshoot problem using Electrical Schematic* Repair Mechanical problems
  • Performed specialized repair operations involving electrical/ electronic and mechanical problems throughout plant.
  • Perform routine preventive maintenance and diagnose mechanical problems and determine corrective action.
  • Repaired and isolated mechanical problems on heavy-light wheeled vehicles and equipment.
  • Diagnosed electrical/mechanical problems including troubleshooting systems and replacing 480/3 Phase motors.
  • Informed appropriate management of potential electrical/mechanical problems and inherent dangers involved.
  • Repaired and maintain electrical and mechanical problems with equipment and facilities.
  • Coordinate efforts with management to solve potential and occurring mechanical problems.
  • Repair electrical and mechanical problems on forklifts and other mobile equipment.
  • Diagnosed and resolve mechanical problems utilizing blueprints and repair manuals.
  • Recognize, diagnose mechanical problems and determine corrective action needed.
  • Identified mechanical problems and provided trouble shooting on all machinery.

Show More

38. Common Areas

low Demand
Here's how Common Areas is used in Maintenance Technician jobs:
  • Inspected liability issues, maintained common areas and ensured security service equipment and lighting remained in working order.
  • Coordinated with Resident Manager to conduct annual inspections of units equipment amenities common areas and grounds.
  • Maintain apartment community by maintaining common areas, painting interior and exterior.
  • Cleaned, maintained and inspected all common areas including property systems continually.
  • Perform preventative maintenance on 208 hotel rooms and interior/exterior common areas.
  • Maintained ongoing cleanliness of apartment building common areas.
  • Conduct preventative maintenance on equipment and common areas.
  • Execute preventative maintenance throughout building common areas.
  • Cleaned vacant apartments and community common areas.
  • Monitored common areas for cleanliness and safety.
  • Job Duties: Cleaning and maintaining to hospital standards of resident rooms, common areas, offices, and outdoor areas.
  • Cleaned all common areas, Apt turn over, grounds, order supplies, Inspect interior exterior of building for repairs.
  • Maintained assets inside and outside of guest rooms and common areas, including mechanical rooms, kitchens, HVAC, etc.
  • Performed daily rounds and checks on fire panels, sprinkler systems, fire pump room, boilers and all common areas.
  • Assist with the inspection of the property and all common areas each morning, to detect maintenance problems that require attention.
  • Inspected property grounds and common areas to detect maintenance problems that require immediate attention to prevent future damage to the property.
  • Maintain grounds and common areas with trash removal, planting, watering, and cleaning areas to make them more presentable.
  • Maintained the cleanliness of all common areas of the camp by removing trash, vacuuming floors, and disinfecting restrooms.
  • Maintained building upkeep for all common areas, interior and exterior landscapes in support of 1600 active duty military personnel.
  • Provide daily maintenance for 320-room guest hotel including: restaurant, pool, common areas, function facilities and grounds.

Show More

39. Maintenance Repairs

low Demand
Here's how Maintenance Repairs is used in Maintenance Technician jobs:
  • Job duties include installations, troubleshooting, maintenance repairs and preventive maintenance of European-manufactured CNC bend/ mill/ cut/ saw/ stamping/engraving machinery.
  • Perform daily maintenance repairs and or countermeasures to ensure life of machinery by utilizing preventative maintenance procedures and work order system.
  • Implement and maintain an inventory control process* Preform preventative maintenance repairs to include all required documentation.
  • Perform maintenance repairs of production breakdowns until thoroughly completed with effective follow-up and communication with management.
  • Repair heating and air conditioning units* Repair major restaurant appliances and equipment* Work on minor maintenance repairs
  • Coordinated a schedule for maintenance repairs to be done alongside engineers and ordered necessary equipment.
  • Install new equipment and maintain necessary documentation for machine specific procedures and preventative maintenance repairs.
  • Performed various aspects of multitasking/skilled crafts related to the mechanical / structural maintenance repairs.
  • Performed maintenance repairs, installations, and troubleshooting of production machinery and support equipment.
  • Assist with household maintenance repairs and preformed minor preventative maintenance on irrigation systems.
  • Provide emergency repairs and scheduled maintenance repairs of all facility and production equipment.
  • Assisted with maintenance repairs and restoring apartment unit to original order for occupancy.
  • Conduct inspections and preventive maintenance repairs to all Capital Metro/Travis Transit Management equipment.
  • Performed maintenance and Minor Repairs to Emergency Maintenance Repairs after Normal Working Hours
  • Practiced general maintenance repairs and replacements in an efficient and timely manner.
  • Performed various industrial maintenance repairs to automated machinery and plant equipment.
  • Maintained permanent records of maintenance repairs performed on all equipment.
  • General maintenance repairs and preventative maintenance meeting housing authority standards.
  • Perform maintenance repairs and installation on rotating and fixed equipment.
  • Repaired property, maintenance repairs on commercial and residential buildings.

Show More

40. Test Procedures

low Demand
Here's how Test Procedures is used in Maintenance Technician jobs:
  • Performed required system level upgrades to radar assemblies and sub-assemblies as directed by test procedures and documentation.
  • Performed expanded test procedures that use concise fault isolation procedures.
  • Designed as well as implemented preventive maintenance test procedures.
  • Performed system function test, of AC/DC drives, power supplies and industrial power systems, in accordance with test procedures.
  • Record test procedures and results, numerical and graphical data, and recommendations for changes in produce or test methods.
  • Accomplished ground and flight test procedures on avionic systems installed on RF-4C-E and A-10A military aircraft using aircraft ground equipment.
  • Test procedures and reports were generated to present each customer the data collected during test.
  • Developed test procedures, test plans, test reports, and procedures to maintain lab facilities
  • Performed test procedures to verify and maintain critical life support equipment for astronaut support.
  • Produce and implement designs; create and test procedures.
  • Assist with the development of operational and test procedures.
  • Create test procedures and test cases for team use.
  • Write computer software and test procedures.
  • Document Test Procedures for NERC.
  • Recorded test procedures and results.Discussed modifications with appropriate staff.
  • Developed test procedures and wrote many work instructions for assorted test equipment maintained by the functional maintenance group.
  • Performed various research test procedures .
  • Revised test procedures for security systems, developed I/O list for plant control Intel multiplexers and Computrol multiplexers.
  • Developed test procedures for centrifuges.Planner, Maintenance Department, Equistar, Matagorda, Texas.Responsible for planning the job scope.

Show More

41. Assembly Line

low Demand
Here's how Assembly Line is used in Maintenance Technician jobs:
  • Master maintenance mechanic experience working in diverse business environments that demanded production lines to ensure efficient operations in the assembly line.
  • Sustained $30 million manufacture assembly line operation that assembled airless dispenser cosmetic & pharmaceutical plastic products.
  • Worked with design engineers and manufacturing engineers in prototype tooling for assembly line and injection molding.
  • Performed maintenance and repair of semi-automated equipment and assembly lines in an industrial bakery plant.
  • Performed troubleshooting and repair of semi-automated equipment and PLC-controlled assembly lines using Allen-Bradley PLC's.
  • Completed tasks of repairing and troubleshooting automated machinery during break downs on assembly lines.
  • Performed maintenance, repair, and improvement activities on press/mold/assembly line equipment.
  • Demonstrated specialized skills in maintaining industrial machines and high-speed assembly line equipment.
  • Maintained and repaired tooling and secondary equipment on an automotive assembly line.
  • Helped to convert plant from assembly line production to cellular manufacturing environment.
  • Performed preventative maintenance, daily repairs and continuous improvement on assembly lines.
  • Worked directly with manufacturers to generate new construction assembly line improvements.
  • Perform maintenance and repair of semi-automated equipment, PLC controlled assembly lines
  • Performed required machining necessary to fabricate and improve assembly line fixtures.
  • Performed maintenance and repaired semi-automated equipment, and PLC-controlled assembly lines.
  • Performed preventative maintenance on assembly line machines and industrial equipment.
  • Established and maintained preventative maintenance procedures of assigned assembly lines.
  • Repair of general assembly line mechanical and electrical equipment.
  • Monitor assigned assembly line and continuously improve upon operation.
  • Repaired and performed preventative maintenance on automotive assembly lines.

Show More

42. Defective Parts

low Demand
Here's how Defective Parts is used in Maintenance Technician jobs:
  • Inspected operating equipment, dismantled when necessary replacing any defective parts ensuring equipment was running at manufacturer's specifications.
  • Installed or repaired machinery/equipment, adjust/align moving parts, replaced defective parts of machinery and moving machinery/equipment.
  • Disassembled, removed and replaced damaged/defective parts, adjusted, reassembled and tested using applicable technical documentation.
  • Carried out problem diagnosis, identified and replaced/repaired defective parts, and performed equipment adjustments.
  • Requisitioned and replaced defective parts as necessary and ensured proper documentation of repairs was completed.
  • Located problems and malfunctions, performed immediate repairs and/or replaced defective parts.
  • Repaired mechanical and electric machinery and replaced worn and defective parts.
  • Disassembled machines and repaired defective parts to ensure machines worked properly.
  • Located problems and malfunctions, repaired machinery and replaced defective parts.
  • Replaced defective parts and adjusted mechanical devices to ensure proper operations.
  • Performed diagnostic tests/troubleshooting to find and repair defective parts.
  • Overhaul shop experience rebuilding timed/life limited components and defective parts
  • Disassembled engines and repaired or replaced defective parts.
  • Replaced defective parts of electrical and Mechanical.
  • Replaced defective parts and/or components.
  • Dismantled equipment to gain access to and remove defective parts using a hoist, cranes, hand tools and power tools.
  • Examine machines to troubleshoot and diagnose problems, dismantle machines, replace defective parts, reassemble machines and make necessary adjustments.
  • Replace broken or defective parts with items obtained from stock, reassemble machines, and make all necessary adjustments for operation.
  • Analyze mechanical, pneumatic, hydraulic or electrical problems and make repairs through adjustments, defective parts replacement, or fabrication.
  • Observed mechanical devices in operation, listening for problems, removing and replacing defective parts, using hand and power tools.

Show More

43. Special Projects

low Demand
Here's how Special Projects is used in Maintenance Technician jobs:
  • Lead on special projects integrating upgraded safety devices into existing machines and modification of mechanical sub-assemblies to increase reliability and production.
  • Worked with a special projects team designing, producing and testing automated equipment in fiberglass column production facility.
  • Proposed and completed special projects to increase efficiency of operations, reporting directly to business owner.
  • Performed routine maintenance, building and grounds inspections and coordination/scheduling of contractors and special projects.
  • Performed several Special Projects involving 50 Ton Crane such as Generator Replacements and Transformer Replacements.
  • Executed scheduled preventive maintenance program and coordinated special projects as directed by Property management.
  • Coordinated special projects as directed from residents, visitors, contractors and fellow employees/directors.
  • Completed and coordinated special projects as assigned by maintenance supervisor and property manager.
  • Managed special projects as they occur from various departments needing attention
  • Performed special projects upon request, including remodeling projects.
  • Completed special projects as directed by Property Manager.
  • Coordinated daily and seasonal requirements and special projects.
  • Participate in special projects as operations demand.
  • Directed and coordinated subcontractors for special projects.
  • Coordinated special projects as directed by superiors.
  • Performed special projects according to Property Manager.
  • Performed special projects and other responsibilities assigned.
  • Provided management with special projects support.
  • Worked independently on special projects.
  • Make readies, work orders, and special projects, including carpentry, A/C's, plumbing, electrical, etc.

Show More

44. Fanuc

low Demand
Here's how Fanuc is used in Maintenance Technician jobs:
  • Modified relay controls to PLC-controlled equipment and Gained experience with FANUC, GE, TI, and A-B controls.
  • Trained on the use, programming and touch up on programs used with FANUC RJ series robots.
  • Completed week long course at FANUC in Chicago in PLC functions and parameters.
  • Performed repair, troubleshooting, and manual operations of FANUC robots.
  • Trained in robotics (GE-FANUC) and KAREL programming language.
  • Utilized Basic robotics troubleshooting on FANUC and MOTOMAN robots.
  • Experience with FANUC robotics, functions, and programs.
  • Experience with Robotic Industrial Machinery such as FANUC.
  • Perform maintenance to FANUC ROBOTS.
  • Obtain certification on GE FANUC LOGIC DEVELOPER.
  • Maintained and repaired Fanuc Robot troubleshot error codes and ensured proper programming and operation.
  • Provided daily maintenance and trouble shooting injection molding and Fanuc robots daily preventive maintenance
  • Utilized electrical, mechanical and technical expertise to troubleshoot and fix Fanuc robots.
  • Performed maintenance on automatic packaging lines consisting of conveyors and Fanuc robots.
  • Experience with fanuc robots, proficient operating machine shop equipment
  • Certified in Fanuc Robotics handling tool and operation programming.
  • Programmed and operated to Fanuc six-axis robots.
  • Experience maintaining and repairing Fanuc Robotics.
  • Trained in forklift repair, robotic programming (Miller and Fanuc) and expanded welding knowledge to include MIG and TIG.
  • Performed preventative maintenance on all production equipment, including: mixers, product depositors, Fanuc robots, and ammonia compressors.

Show More

45. Service Calls

low Demand
Here's how Service Calls is used in Maintenance Technician jobs:
  • Responded to service calls utilizing strong troubleshooting abilities to quickly diagnose and repair machinery to reduce production downtime.
  • Perform maintenance actions on production machinery including routine service calls and preventive maintenance inspections.
  • Scheduled all required preventative maintenance and handled/directed all service calls related to the department.
  • Respond to routine and emergency service calls and tenant/property management requests.
  • Responded to service calls and ensured completion of technical repairs or replacement
  • Prioritized service calls statewide while maintaining superior customer service.
  • Prioritize and respond to emergency service calls immediately.
  • Experienced in customer interaction through service calls across campus
  • Provide on-site emergency and emergency service calls.
  • General property maintenance and resident service calls.
  • Handle service calls ensuring customer satisfaction.
  • Maintained emergency maintenance after-hours service calls.
  • Respond to HVAC, electrical, plumbing, indoor/outdoor lighting and handyman service calls for the main library and two branches.
  • Worked service calls for cable television and high speed internet service at residential homes and MDU, SDU and CBN properties.
  • Responded to plumbing service calls throughout the facility for leaks, repairs, sewer and drains, cleaning and septic system.
  • Respond to service calls from management and residents, on call 24 Hours a day, seven days a week.
  • Responded to work orders on a daily basis as well as routine emergency service calls both during and after hours.
  • Conducted service calls, repairs and modifications of large irrigation systems; grounds keeping; did maintenance of housing units.
  • Performed advanced installations, service calls and repairs of video, data and voice services for residential and business customers.
  • Respond to all service calls (fire system alarms, electrical, plumbing, & resetting the elevator).

Show More

46. PMS

low Demand
Here's how PMS is used in Maintenance Technician jobs:
  • Performed PMs on equipment while observing mechanical operation to determine efficiency and to detect problems.
  • Perform PMs on all equipment* Mechanical/Electrical troubleshooting and diagnostics* Understand and Implement company policies
  • Performed facility tool and system PMs according to manufacturing and internal specifications.
  • Performed nightly/weekly/monthly preventative maintenance (PMs) on production line machinery.
  • Documented PMs and equipment repairs using computer asset management system.
  • Maintain PMs and operation of manufacturing department.
  • Perform daily/weekly/monthly PMs as required.
  • Job Duties: Swimming pool maintenance, guest room PMs, plumbing, electric, painting, HVAC, service tickets
  • Worked on pumps, valves, air compressors, large fans, alignments, PMs and performed repairs as needed.
  • Performed PMs and repair of injection molding machinery, printers, chain conveyors, folding machines, and other machinery.
  • Created new Preventative Maintenance System (PMS) manuals for all maintenance sections containing updated instructions and safety procedures.
  • Maintain all records on CMMS along with performing PMS work and logging all PMS completed into CMMS system.
  • Monitor Delta V system, address issues as they arise, conduct PMs, repair equipment as needed.
  • Performed PMs on manufacturing equipment including overhead electric hoists, forklifts, hydraulic presses, and electrical pumps.
  • Follow written PMs to locate and identify problems on stationary equipment, hydraulics, and overhead conveyor chains.
  • Meet and exceed time line for equipment PMs or down time to keep the 24/7 operation going.
  • Preform PMs, answer calls for broken down equipment and get them running in a timely manor.
  • Performed day to day repairs on injection molding machines and worked on maintaining all PMs for machines.
  • Perform PMs, upgrades, modify, fabricate, keep all equipment up to OSHA/ NEC standards.
  • Adhere to strict documentation policies on equipment repairs and PMs provided by the Food and Drug Administration.

Show More

47. Apartment Maintenance

low Demand
Here's how Apartment Maintenance is used in Maintenance Technician jobs:
  • General apartment maintenance* Replacing appliances* Make ready for new residents* Working on water heaters and furnaces* CPO license
  • Performed apartment maintenance for student housing and created and ran inventory warehouse.
  • Performed apartment maintenance - strong renovation, apartment turnover, parts inventory
  • Perform apartment maintenance at various properties for temporarily employment agency.
  • Completed property and apartment maintenance within a 24-hour turn-around period.
  • Performed various apartment maintenance functions at a 128-unit apartment complex.
  • Provided apartment maintenance including HVAC/R maintenance, installation and repair
  • Make ready/ work orders /renovations /grounds/all around apartment maintenance task
  • Preformed all the apartment maintenance including emergency calls.
  • Coordinated apartment maintenance systems with contractors and supervisors.
  • Performed maintenance on every aspect of apartment maintenance
  • Installed flooring and complete general apartment maintenance.
  • Performed apartment maintenance at Progress Park apartments.
  • Performed all phases of apartment maintenance unsupervised.
  • General apartment maintenance painting Plumbing electrical.
  • Performed general plumbing and apartment maintenance.
  • General apartment maintenance, obtained CPO
  • General apartment maintenance and apartment turning such as, installation of ceiling fans, replacing and repairing kitchen appliances and fixtures.
  • Job duties included apartment maintenance of plumbing, heating and air conditioning systems, minor repair of drywall and painting.
  • General apartment maintenance, including painting, plumbing and electrical repairs, landscaping, pool maintenance, and HVAC.

Show More

48. Repair Equipment

low Demand
Here's how Repair Equipment is used in Maintenance Technician jobs:
  • Maintained total responsibility for preventive maintenance and ordered parts to maintain and repair equipment to keep them in excellent operating condition.
  • Demonstrated invaluable experience by engaging in the fabrication and custom machining of hard-to-find or obsolete parts belonging to repair equipment.
  • Maintain inventory of repair equipment and supplies Complete inspections of offices and laboratories with Maintenance Manager.
  • Worked and trained with Toolmakers and Electronic Technicians to effectively troubleshoot and repair equipment.
  • Perform preventative maintenance, troubleshoot and repair equipment electrically and mechanically while running.
  • Developed plans to repair equipment returning from deployments to Bosnia - Herzegovina.
  • Used various electrical meters to install or repair equipment to prescribed specifications.
  • Perform daily maintenance task diagnose mechanical and electrical issues and repair equipment.
  • Collaborate effectively with a team of mechanics to troubleshoot and repair equipment.
  • Complete requisitions with proper approvals for maintenance items needed to repair equipment.
  • Diagnose and repair equipment involving hydraulic, electrical and pneumatic components.
  • Blueprint and schematic interpretation, overhaul and repair equipment when possible
  • Maintain and repair equipment in a time sensitive lean manufacturing environment
  • Work independently to troubleshoot, identify and repair equipment.
  • Worked as a universal technician that oversaw repair equipment.
  • Work under engineering direction to trouble-shoot and repair equipment.
  • Diagnose and repair equipment malfunctions and implement corrective actions.
  • Qualified equipment operator for multiple road repair equipment.
  • Reviewed equipment blueprints to effectively repair equipment.
  • Repair equipment and machinery quickly and efficiently.

Show More

49. Repair Parts

low Demand
Here's how Repair Parts is used in Maintenance Technician jobs:
  • Managed repair parts acquisition and pursued alternatives to normal supply sources through local purchased items resulting in improved equipment readiness.
  • Performed hydraulic, pneumatic, electrical, and mechanical maintenance Fabrication of repair parts and welding
  • Managed parts inventory insuring repair parts were on hand for necessary repairs minimizing down-time.
  • Managed Stock, repair parts, and maintenance-related items required per applicable regulations.
  • Assist Maintenance Supervisor in inventory/ordering of maintenance supplies and repair parts.
  • Requisitioned repair parts for electrical, hydraulic, and pneumatic machinery.
  • Fabricated repair parts utilizing machine shop equipment.
  • Fabricated repair parts for production equipment.
  • Monitored and sustained repair parts inventory.
  • Utilized companies machine shop to fabricate most repair parts in a timely and efficient manner in order to reduce down time.
  • Ordered materials, researched pricing, purchased repair parts and supplies to maintain company productivity, always keeping costs a priority.
  • Locate repair parts and materials, make sure repairs are done in timely manner that is still cost efficient to facility.
  • Acted as division repair parts petty officer, researching and ordering over 200 electronic components to support division's repair initiatives.
  • Perform preventive maintenance on all Production and some Facility equipment, replace and repair parts as parts are worn or broken.
  • Prepare logistics documentation, develop requisitions, and manage records of equipment, components, repair parts, and related manuals.
  • Created an effective and economical repair parts tracking system in excel format which saved the Navy man hours and increased productivity.
  • Used metalworking tools and equipment to form, cut bend and fasten replacement or repair parts to damaged structures and components.
  • Diagnose problems by reading schematics, replace or repair parts as well as computer boards, test machines and make adjustments.
  • Identify and order repair parts, monitor supply status of parts requisitions, and install all required repair parts upon receipt.
  • Repaired and maintained the following: Preventive maintenance, change over to other parts, repair parts and repair production line.

Show More

50. Conveyor Belts

low Demand
Here's how Conveyor Belts is used in Maintenance Technician jobs:
  • Troubleshooted, disassembled and repaired industrial mining conveyor belts.
  • Perform a lot of fabricating and welding such as Stairs, handrails, engineering and fabricating cat walks around conveyor belts.
  • Replace and install belts on conveyors, lace conveyor belts, adjust and track high speed and low speed conveyor belts.
  • Replaced conveyor belts that break or just need to be laced, adjusted air pressure as needed to control line speed.
  • Repaired and maintained the following processing machines, conveyor belts, electrical motors, contacts, some hydraulics and pneumatic.
  • Repaired & performed maintenance of machinery including: press forms, hydraulic systems, conveyor belts & vulcanizing boiler systems
  • Required to up keep the Mixer Plant by replacing Air cylinders, Conveyor Belts, Limit switches and Rollers.
  • Repaired and replaced conveyor belts, AC/DC motors, limit, float, and temperature switches and various sensors.
  • Plant maintenance - Chillers, air compressors, conveyor belts, electrical - 480 and 120 V, troubleshooting.
  • Performed preventive maintenance on all equipment, replaced and repaired conveyor belts, head tail, and hydraulic systems.
  • Conducted preventive maintenance and regular maintenance on Ball Mills, Ball Mill Feeders, Crushers, and Conveyor belts.
  • Work on several Bosch wrapping equipment inspecting fin wheels, coolers, inspecting all timing belts and conveyor belts.
  • Maintained oil transfer pumps, heat ex changers, conveyor belts, blower motors, vacuum cleaning stations.
  • Performed welding, bearing replacement, preventive and corrective maintenance on packaging machines, and conveyor belts.
  • Assisted maintenance crew in troubleshooting and repairing all motors, conveyor belts, and the electrical room.
  • Maintained conveyor belts, elevators, and shaker decks by lubing chains, sprockets, and gears.
  • Perform preventative maintenance, Arc weld, MIG weld, repair/replace shafts, bearings, conveyor belts.
  • Unload finished products from conveyor belts, pack them in containers, and place containers in warehouses.
  • Fixed Conveyor belts, changed parts, ordered parts, trouble shouted minor and major issues.
  • Dust off all conveyor belts, dust mop floors and used scrubber to sterilize all areas.

Show More

20 Most Common Skill for a Maintenance Technician

Hvac12.2%
Safety Procedures11.3%
Drywall Repair10%
Facility Maintenance9.3%
PLC6.2%
Electrical Systems6%
Air Compressors5.8%
Preventative Maintenance4.9%

Typical Skill-Sets Required For A Maintenance Technician

RankSkillPercentage of ResumesPercentage
1
1
Hvac
Hvac
9.1%
9.1%
2
2
Safety Procedures
Safety Procedures
8.4%
8.4%
3
3
Drywall Repair
Drywall Repair
7.4%
7.4%
4
4
Facility Maintenance
Facility Maintenance
6.9%
6.9%
5
5
PLC
PLC
4.6%
4.6%
6
6
Electrical Systems
Electrical Systems
4.4%
4.4%
7
7
Air Compressors
Air Compressors
4.3%
4.3%
8
8
Preventative Maintenance
Preventative Maintenance
3.7%
3.7%
9
9
Building Maintenance
Building Maintenance
3.2%
3.2%
10
10
Hand Tools
Hand Tools
2.5%
2.5%
11
11
Production Equipment
Production Equipment
2.3%
2.3%
12
12
Customer Service
Customer Service
2.2%
2.2%
13
13
Light Fixtures
Light Fixtures
2.2%
2.2%
14
14
Maintenance Tech
Maintenance Tech
2.1%
2.1%
15
15
Hydraulic Systems
Hydraulic Systems
2.1%
2.1%
16
16
Snow Removal
Snow Removal
1.9%
1.9%
17
17
Mechanical Equipment
Mechanical Equipment
1.9%
1.9%
18
18
Electrical Repairs
Electrical Repairs
1.8%
1.8%
19
19
MIG
MIG
1.7%
1.7%
20
20
CNC
CNC
1.5%
1.5%
21
21
Conveyor Systems
Conveyor Systems
1.4%
1.4%
22
22
Osha
Osha
1.3%
1.3%
23
23
New Equipment
New Equipment
1.3%
1.3%
24
24
Maintenance Mechanic
Maintenance Mechanic
1.3%
1.3%
25
25
Production Machines
Production Machines
1.2%
1.2%
26
26
TIG
TIG
1.2%
1.2%
27
27
Vacant Units
Vacant Units
1.1%
1.1%
28
28
Heavy Equipment
Heavy Equipment
1.1%
1.1%
29
29
Water Heaters
Water Heaters
1%
1%
30
30
Maintenance Tasks
Maintenance Tasks
0.9%
0.9%
31
31
Pneumatic Systems
Pneumatic Systems
0.9%
0.9%
32
32
Plant Operations
Plant Operations
0.9%
0.9%
33
33
Trouble Shooting
Trouble Shooting
0.8%
0.8%
34
34
Grounds Maintenance
Grounds Maintenance
0.8%
0.8%
35
35
Gear Boxes
Gear Boxes
0.8%
0.8%
36
36
Building Systems
Building Systems
0.8%
0.8%
37
37
Mechanical Problems
Mechanical Problems
0.8%
0.8%
38
38
Common Areas
Common Areas
0.7%
0.7%
39
39
Maintenance Repairs
Maintenance Repairs
0.7%
0.7%
40
40
Test Procedures
Test Procedures
0.7%
0.7%
41
41
Assembly Line
Assembly Line
0.7%
0.7%
42
42
Defective Parts
Defective Parts
0.7%
0.7%
43
43
Special Projects
Special Projects
0.6%
0.6%
44
44
Fanuc
Fanuc
0.6%
0.6%
45
45
Service Calls
Service Calls
0.6%
0.6%
46
46
PMS
PMS
0.6%
0.6%
47
47
Apartment Maintenance
Apartment Maintenance
0.6%
0.6%
48
48
Repair Equipment
Repair Equipment
0.6%
0.6%
49
49
Repair Parts
Repair Parts
0.5%
0.5%
50
50
Conveyor Belts
Conveyor Belts
0.5%
0.5%

44,267 Maintenance Technician Jobs

Where do you want to work?