Maintenance technician jobs in Lake Forest, CA - 3,029 jobs

Job Title: Maintenance Technician Duration: 5 months with possible extension Shift: M-F 7am - 4pm with some scheduled OT for vendor escort Overview of Work Environment/Client Nuances: This location covers 2 office buildings, majority of work will be done on 5th St., with occasional work in Grand Ave. This is a role that requires excellent verbal and written communication skills and has a lot of interaction with the client. About the Role: As a Maintenance Technician, you will be responsible for maintaining small to medium-sized buildings, industrial systems, and equipment. This job is part of the Engineering and Technical Services job function. They are responsible for providing support, preventive maintenance, and repairs on equipment and systems. Resource's typical working day: General office maintenance Insulation IOC Doors Wall Hangings Painting and patching Basic plumbing Basic carpentry Setting up for events Furniture set up Vendor escorting Must Have Skills: Good customer service skills Good trouble-shooting skills Basic plumbing Basic HVAC Basic electrical Self-starter Proactive High level of professionalism General maintenance skills Basic carpentry skills Experience with troubleshooting office appliances Ice machines Dish washers Coffee machines Nice to have skills: Writing proficiency Excellent communication skills Team player and flexible Years of Experience: 3-5 years Education: H.S diploma or GED Software skills: Basic computer skills Emailing skills Laptop/tablet skills Microsoft Office What You'll Do: Perform ongoing preventive maintenance and repairs on mechanical, electrical, and other building systems. Conduct routine maintenance inspections, diagnose potential problems, and make repairs. Assist with the installation and modification of building equipment and systems. Review assigned work orders and partner with available systems to track completion. Support energy management by ensuring all building systems are operating efficiently. Inspect existing installations for compliance with building codes and safety regulations. Use existing procedures to solve straightforward problems. Exchange straightforward information in a clear, concise manner. Impact team through defined duties, methods and tasks as described in detail. Deliver own output by following defined procedures and processes under close supervision and guidance. What You'll Need: High School Diploma, GED, or trade school diploma with 1-2 years of job-related experience. In lieu of a diploma, a combination of experience and education will be considered. Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more. Ability to follow basic work routines and standards in the application of work. Communication skills to exchange straightforward information. Working knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc. Strong organizational skills with an inquisitive mindset.

Senior Maintenance Technician (HVAC Certified) 📍 Greater Los Angeles & Inland Empire Areas 🏢 Portfolio: Office, Industrial, & Retail Properties We're hiring a highly skilled Senior Maintenance Technician (HVAC certified) to lead HVAC and building maintenance across a diverse commercial portfolio. This hands-on leadership role ensures safe, efficient, and reliable building operations while supporting maintenance staff, coordinating vendors, and driving preventive maintenance programs. What You'll Do Perform advanced troubleshooting, repair, and maintenance on commercial HVAC systems Maintain and service mechanical, electrical, and plumbing (MEP) systems across multiple properties Oversee and execute preventive maintenance programs, equipment logs, and safety protocols Monitor building systems, diagnose issues quickly, and implement corrective actions to reduce downtime Support and refine building energy management processes to improve efficiency and sustainability Create and maintain inventory of supplies, materials, tools, and equipment for each property Schedule, direct, and mentor maintenance staff; provide hands-on training and quality control Coordinate and supervise third-party vendors to ensure scope, timeline, and budget compliance Assist with annual operating budgets and long-term capital expenditure planning Track maintenance expenses and help forecast equipment replacement schedules Ensure compliance with OSHA, CAL/OSHA, local codes, and internal safety standards Maintain documentation such as inspection reports, maintenance logs, and regulatory certificates Participate in special projects, building improvements, and construction-related coordination Provide excellent customer service to tenants, internal teams, and property management Respond to emergency maintenance situations as needed What We're Looking For HVAC Certification + EPA 608 Universal (required) 5-7 years of commercial building maintenance experience Strong HVAC, mechanical, electrical, and plumbing troubleshooting skills Experience supervising maintenance teams and coordinating vendors Ability to read and interpret blueprints, schematics, and technical manuals Strong communication, organization, and problem-solving abilities Proficiency in Word, Excel, Outlook; Yardi or MRI experience preferred Valid CA Driver's License; OSHA, CPR/First Aid, electrical or plumbing certifications a plus What We Offer Competitive compensation and benefits based on experience Mileage reimbursement or vehicle allowance Professional certification reimbursement Growth opportunities within a dynamic and expanding portfolio

Handyman Make money with your Handyman skills on your own terms! Join Airtasker, the community platform connecting people ready to work with those who need jobs done. With Airtasker, you decide when and where you work-choose tasks that match your skills, set your own rates, and work as much or as little as you want. No startup fees, no monthly costs-just a straightforward way to turn your handyman skills into extra income, or build a career at your own pace. Complete tasks like TV mounting, fixing leaky pipes, wall repairs and more! Get started today! Why Join Airtasker? Flexible income: Be your own boss, set your own hours, and choose tasks that fit your schedule. Easy start: Most tasks require no special licensing or vetting, so you can start right away. Wide variety of tasks: Find everything from handyman work and pet care to skilled trades and creative gigs. Build your reputation: Stand out with reviews, earn badges, and increase your visibility to customers. Lower fees for loyal Taskers: Complete more tasks to enjoy lower service fees over time. Requirements: Age 18 or older Own an iPhone or Android smartphone Have the tools and skills for accepted jobs Commit to excellent customer service Keep work on the platform so we both earn! No need to apply-simply sign up on Airtasker.com, browse available tasks, and start making offers today! Start earning now!

Company Information Headquartered in St. Augustine, FL, with offices and manufacturing facilities all around the globe, Amphenol CIT is one of the world's leading designers and manufacturers of high-performance wire, cable, and medical devices. We provide complete interconnect solutions to industries like Aerospace, Military & Defense Electronics, Space, Medical, Test & Measurement, and Industrial. Our talented team of employees worldwide helps bring movies to your seat on airplanes, deliver mission-critical information from drones to the command office, transfer heart rhythm to paper, route communications from space, connect power to downhill oil drills, and get planes back in the air faster. At Amphenol CIT, we make the amazing possible. Take the next step to become an integral part of our team by applying today and kickstart your journey with us. Summary A Facilities Maintenance Technician II plays a crucial role in ensuring the smooth operation of equipment used in manufacturing. Their primary responsibility is to perform regular preventive maintenance on machinery and tools to facilitate successful production activities. Essential Job Functions Responsible for maintaining building facilities using the Computerized Maintenance Management System (CMMS) to facilitate Total Productive Maintenance (TPM). Collaborates with other technicians to complete tasks and support the Environmental Health & Safety team. Performs maintenance tasks involving electrical wiring, pneumatics, PLCs, servo motors, inventory management, and spare parts to execute scheduled preventive and unscheduled general maintenance activities. Install new electrical circuits, ensuring compliance with safety protocols such as Lockout/Tagout (LOTO), Hot Work, Arc Flash, and Personal Protective Equipment (PPE). Conduct scheduled preventive maintenance (PMs) and unscheduled repairs, including troubleshooting electronic circuits and PLCs using schematics and OEM manuals. Perform mechanical and parameter adjustments, dismantle machines for repairs or PMs, and coordinate with technical support, both internally and externally, for CNC machines and production equipment. Assist in developing and reviewing new PMs, procedures, and policies. Execute work orders (W/O) and coordinate with outside vendors for equipment maintenance. Maintain functionality of emergency lighting, fire pump systems, alarms, extinguishers, and eyewash stations. Comply with all safety and work rules and regulations. Use appropriate PPE during maintenance tasks. Maintain departmental housekeeping standards and clean/restock area at end of shift. Engage in continuous improvement projects and 5S-related performance teams. Other duties as required in support of the department and the company* Supervisor Responsibilities This role is purely as an individual contributor. Qualifications To succeed in this job, an individual must satisfactorily perform each essential job function. The requirements below represent the required knowledge, skill, and ability. Reasonable accommodations may be made to enable individuals with disabilities to perform basic functions. EDUCATION And EXPERIENCE High school diploma or equivalent, e.g. vocational training. 2+ years of maintenance experience in electronics, hydraulics, pneumatics, and mechanical equipment. Background in electrical circuits. Tool repair experience preferred. Understanding and experience in a Lean manufacturing environment preferred. CERTIFICATES, LICENSES, REGISTRATIONS Certified Electrician preferred. Language Requirements Excellent verbal and written communication skills in English. Conversational in any other language preferred. Job Skills Intermediate understanding of MS Office, including Word and Excel. Ability to measure accurately using a ruler or tape measure. Proficient in the use of tools and power equipment. Demonstrates good judgment and decision-making skills. Ability to be flexible and function comfortably in a fast-paced, constantly changing, and ambiguous environment while maintaining a positive team environment. Reliable and flexible to work additional hours on short notice to complete orders and special projects to meet customer demands. Ability to work with minimal supervision. PHYSICAL DEMANDS The employee will regularly engage in activities such as using hands to finger, handle, or feel and communicating verbally. Additionally, the employee will frequently need to reach with hands and arms while standing and walking as part of the role. Occasional lifting and movement of objects weighing up to fifty (50) pounds may be required. This position also demands specific vision capabilities, including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. According to ADA regulations, reasonable accommodation will be provided to ensure that individuals with disabilities can perform the job's essential functions. WORK ENVIRONMENT Manufacturing environment: A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery, and exposure to hazards such as chemicals, heat, dust, or noise with a culture of teamwork, communication, and continuous improvement. ENVIRONMENTAL POLICY Carlisle Interconnect Technologies is dedicated to identifying and reducing the environmental impact of its operations, activities, and products. We are committed to complying with all applicable laws and other environmental regulatory requirements. We are also committed to preventing pollution and improving our environmental performance in all our global operations. This will be achieved through a comprehensive Environmental Management System that provides the framework for setting and reviewing Carlisle Interconnect Technologies' environmental objectives and targets. Personal Protective Equipment Requirements ASTM F-2412-2005, ANSI Z41-1999, or ANSI Z41-1991 rated safety toe shoes in specific areas. Clear ANSI Z87.1 safety-rated glasses in specific areas. Hearing protection, in specific locations. Ability to compile with JSA in specific areas. EXPORT COMPLIANCE DISCLAIMER This position includes access or potential access to ITAR and EAR technical data. Therefore, candidates must qualify as US Persons, defined as US Citizens or Permanent Residents (Green Card Holders). TRAVEL Travel is not required for this position AMPHENOL CIT RESERVES THE RIGHT TO MODIFY, INTERPRET, OR APPLY THIS IN ANY WAY THE COMPANY DESIRES. THIS IN NO WAY IMPLIES THAT THESE ARE THE ONLY DUTIES, INCLUDING ESSENTIAL DUTIES, TO BE PERFORMED BY THE EMPLOYEE OCCUPYING THIS POSITION. THIS JOB DESCRIPTION IS NOT AN EMPLOYMENT CONTRACT, IMPLIED OR OTHERWISE. THE EMPLOYMENT RELATIONSHIP REMAINS "AT-WILL." THE AFOREMENTIONED JOB REQUIREMENTS ARE SUBJECT TO CHANGE TO REASONABLY ACCOMMODATE QUALIFIED DISABLED INDIVIDUALS. Amphenol CIT is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. For more information regarding EEOC requirements please visit **************************************************************** *********************************************************************************************** Due to the nature of our business, the candidate must be able to legally work in the United States; we are unable to provide sponsorship. Position requires candidate to be a U.S. person as defined in ITAR, 22 CFR 120.15 (U.S. Citizenship or Resident Alien Status) and defined by 8 U.S.C. 1101(a) (20). Amphenol CIT participates in the United States Department of Homeland Security E-Verify program. The E-Verify program is a web-based employment eligibility verification system for newly hired employees operated by the U.S. Citizenship and Immigration Services. Any candidate that needs an accommodation or assistance with the application process should contact HR at ********************************

1. Read machine assembly drawings and electrical schematics to identify machine malfunctions in mechanical and electrical systems 2. Adjust mechanical assemblies and control systems to correct machine malfunctions 3. Design and fabricate metal product for production equipment. 4. Work with maintenance department managers to analyze machine failures and develop plans to reduce downtime 5. Analyze test results, machine error messages, and information obtained from operators in order to diagnose equipment problems. 6. Observe and test the operation of machinery and equipment in order to diagnose malfunctions, using voltmeters and other testing devices. 7. Examine parts for defects such as breakage and excessive wear. 8. Disassemble machinery and equipment to remove parts and make repairs. 9. Clean, lubricate, and adjust parts, equipment, and machinery. 10. Assist in the installation new and used equipment as instructed by manager 11. Upgrade existing equipment as instructed by manager 12. Help in writing and revising PM checklist and procedures for assigned equipment 13. Training of junior level mechanics. 14. Perform preventive maintenance of equipment 15. Identification of spare parts 16. Documents all work performed daily. 17. Submit purchase order request for parts. 18. Responsible for performing other tasks as instructed by Supervisor or Manager.

Company Profile SoCal JCB is a highly successful, fast-growing business We pride ourselves in customer service. We invest in our workforce and offer a highly competitive compensation and benefit program. SoCal JCB is an authorized dealer for JCB construction equipment including skid steer loaders, backhoe loaders, wheel loaders, excavators and telehandlers. Position Summary Reporting to the Service Manager. This position is responsible for repairing and maintaining various types of aerial and earth moving equipment. Position Type: Non-Exempt Major Tasks, Responsibilities & Key Accountabilities Complete and turn in reports that capture all time and work completed Provide diagnostic analysis, repair, or preventative maintenance for customer machines Complete on-site system audits and evaluations Practice and adhere to all safety and training Qualifications Strong written and verbal communication skills 1-3 years installing and maintaining machines Ability to travel Ability to lift up to 75 pounds Computer skills needed perform diagnostics, complete reports, etc Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand and walk, with frequent lifting, guiding and/or carrying of light-weight materials or equipment for up to 12 hours. Ability to twist upper body frequently, bend at waist, kneel, crouch and negotiate uneven surfaces. Able to lift up to 50lbs • Use hands, arms and legs fully; grasp, manipulate, and assemble small to large objects with the aid of forklifts or cranes as needed; see and hear well. Must be able to hear with or without aid. Good eye hand coordination. Communicate by speech and hearing in person at a Basic English proficiency. JCB is an equal employment opportunity (EEO) employer in accordance with applicable federal, state and local laws. JCB complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. JCB is not currently hiring individuals for this position who now or in the future require sponsorship for employment visa status; however, as a global company, JCB offers many job opportunities outside of the U.S. which can be found through our website at ****************************************

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. As one of the largest global security companies in the world, Northrop Grumman is proud to help our nation's military personnel navigate their next chapter into civilian careers. Approximately 20% of Northrop Grumman's 100,000 employees self-identify as veterans, and more than 2,000 are reservists. The Northrop Grumman DoD SkillBridge Program is an approved SkillBridge Program under Dept. of Defense Instruction 1322.29. The program is an opportunity for service members preparing for civilian careers to gain valuable civilian work experience during their last 6 months of service, for up to 180 days. The DoD SkillBridge Program is open to all ranks and experience levels. DoD SkillBridge participants are not eligible for compensation from Northrop Grumman, as they continue to receive military compensation and benefits as active-duty service members **.** **Responsibilities for DoD SkillBridge Program participation are:** Northrop Grumman Corporation (NGC) has developed the Northrop Grumman - DoD SkillBridge Program (DoD SkillBridge) utilizing the DoDI guidance for SkillBridge. Through this program, the service-member will work on site with their host company, gaining experience in an entry to mid-level career path. The service member will be on the job training supporting a work schedule equivalent to 40hrs per week. Outlined below are the Goals, Objectives, and Outcomes for the program. **Goals** _- Provide separating service-members with job skills training in a professional setting during the final phase of their military service. This program is specifically designed to offer hands-on experience that result in the potential to convert to a full-time opportunity as the conclusion of the training. Participants will serve as a pipeline for high-speed, motivated military candidates into NGC._ **Objectives** _- Service Members who complete the DoD SkillBridge program will be highly trained, capable, future employees that align to the specific needs of the organization and are prepared to meet the NG mission "Defining Possible" on Day 1. This program provides comprehensive hands-on experience including professional development, networking with leadership, and training specifically focused on NG leadership principles, company history, customer/stakeholder engagement, product and service overview, and core job responsibilities._ **Outcome** _- Offer service-members preparing for civilian careers a rewarding opportunity to join the Northrop Grumman team._ **DoD SkillBridge Eligibility:** + Has served at least 180 days on active duty + Is within 12 months of separation or retirement + Will receive an honorable discharge + Has taken any service TAPS/TGPS + Has attended or participated in an ethics brief within the last 12 months + Received Unit Commander (first O-4/Field Grade commander in chain of command) written authorization and approval to participate in DoD SkillBridge Program prior to start of internship. **Before Applying** **IMPORTANT** - Please download and complete the DoD SkillBridge Prescreen prior to applying to this position - DoD SkillBridge Prescreen Form (******************************************************************************************************************* **Upload this form, along with your resume, during the application process** **Job Description:** Performs installation, maintenance, and repairs on line manufacturing equipment. Locates and diagnoses failures, replaces defective components, and performs basic troubleshooting using standard electronic equipment, detailed drawings, diagrams, sketches, specifications, prints, manuals, and verbal and/or written instructions. Maintains appropriate maintenance and repair logs. Uses a variety of hand, power, and test tools and equipment. May redesign optical, vacuum, electrical, electronic, or mechanical systems for incorporation on existing manufacturing equipment. May estimate labor and equipment costs and prepare requisitions as required. **Basic Qualifications** **:** + High School Diploma/GED with 2+ years of industry-related experience + Experience working with electronics and test equipment + MS Office experience + Willing to work a flexible work schedule that includes extended shifts, may include holidays, and weekends as required + US Citizenship required **Preferred Qualifications:** + Active Secret clearance. + Advanced education in electronics, electronic testing, electronic troubleshooting + Developmental or operational test experience. + 4 years or more of industry-related testing and troubleshooting experience. + Experience with ESD (electrostatic discharge) and FOD (foreign object damage) control. Salary Range: $59,300.00 - $98,900.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Central Transport is one of the nation's most trusted and technologically advanced Less-Than-Truckload (LTL) carriers. With an ever-growing network of terminals nationwide, our team of dedicated professionals provide safe and efficient service to the United States, Canada, and Mexico. Our Growth is Creating Great Opportunities! Our team is expanding, and we want to hire the most talented people we can. Continued success depends on it! Once you've had a chance to explore our current open positions, apply to the ones you feel suit you best and keep track of both your progress in the selection process, and new postings that might interest you! Thanks for your interest in working on our team! Central Transport is an industry leading Less-Than-Truckload (LTL) transportation carrier. We are one of the nation's largest LTL carriers and have experienced significant growth over the last several years. We help to build and shape the United States by transporting the goods businesses need to run, and the goods they produce. We are proud to provide such critical services which touch every facet of everyday life. Responsibilities Include: General facility repair work including basic plumbing, electrical and HVAC skills General welding: dock plates, dock bumpers etc. Operation of company tucks to transport supplies and equipment Weekly travel to company owned facilities for general dock and facility repairs The ideal candidate will have the ability to diagnose and repair: Plumbing - general bathroom plumbing maintenance, familiar with flush vales (Sloan, Zurn, etc) and drains (including cabling/snaking when required). Repairing copper, pex, sink, faucet, toilet replacement Electrical - add circuit and outlet/switch, replace outlet/switch, light fixtures/ballasts Carpentry - install floor tiles including ceramic and VCT, repair and hang metal/wood doors, masonry repairs, concrete repairs, drywall, and other trades Welding - stick welding carbon steel (dock levelers, dock bumpers, dock plates) HVAC - seasonal preventive maintenance and minor diagnostic/repair Roofing Repair- EPDM, TPO Qualifications: 3-5 years of welding experience 3-5 years of general maintenance repair/troubleshooting experience MUST have the ability to travel in order to service a number of facilities within an assigned geographical region Work Schedule: 7AM - 5PM while at home facility 10-12 hour shifts while Traveling Travel out 5-10 days per trip What Central Offers: Industry Leading Pay Overtime Benefits Package (Medical, Dental, Vision, PTO) If you're interested and would like to learn more, please call ************ ext. 2461 or submit your resume! Job Type: Full-time

Leads all maintenance functions of production equipment in the assigned area. Work includes routine inspection and repair or replacement of defective or faulty parts on machines and related equipment. All work to be performed in such a matter to ensure good workmanship with minimum delay. This position is expected to take a proactive role in supporting the mfg team, provide internal customer support, and build a high level of trust with internal customers and QA/Mfg personnel. In addition, this position is expected to identify and execute tasks that enhance the ability of the team to provide an added value line maintenance service for the site and provide guidance and direction on maintenance technical issues, as well as assist in providing innovative, creative, effective, and long-term solutions related to mfg line maintenance and repair. 1. Maintain all assigned test equipment and assuring equipment is in calibration 2. Perform equipment preventative maintenance, troubleshooting, and repair duties 3. When necessary, coordinate maintenance/repair of equipment between cross-functional operation and 3rd Parties 4. Ensure timely turn-around time on all equipment maintenance and repair services 5. Generate and maintain appropriate work-related records, such as maintenance work orders, IQ/OQ reports, PM schedules & checklists, and the like. 6. Assist in maintaining equipment asset data 7. Write and update procedures to ensure efficiency, standardization, and accuracy or repair/maintenance services 8. Work with production on a daily basis to coordinate appropriate course of action to maximize uptime and quality performance of respective area. 9. Use tools and equipment to repair or modify parts and equipment 10. Supports engineers in equipment or process validation studies. 11. Understand, troubleshoot, and repair equipment, such as: - Electrical Control Technology - AC and DC Motors & Drives - Breakers and fuses - Industrial Wiring - Transformers - Power Supplies - PLC's - Industrial Ethernet Networks - Robotics Controls 12. Must have ability to read and understand electrical/hydraulic/pneumatic schematics and mechanical assembly drawings: - Hydraulic and Pneumatic Systems - Pressure and Flow Controls - Cylinders, valves, pumps, etc. - Drive Systems - Motion control systems - Process Control Technology - Sensors - Thermocouples - Pressure Transducers/Switches Range: $16.83 - $25.00 Financial compensation packages may be higher/lower than what is listed, & will ultimately depend on factors including relevant experience, internal equity, skillset, knowledge, geography, education, business needs and market demand. **Auto req ID:** 12953BR **Location MV:** Aliso Viejo, California, USA **Department Name:** 328 Manufacturing Line Maintenance **Qualifications:** 1. Technical school education or equivalent education/experience. 2. Strong background in machine maintenance and troubleshooting skills. 3. Knowledge and experience working with machine control systems, including PLC's (Panasonic, AB, Mitsubishi, etc.), servo controls, and Variable Speed Drives, including vision systems 4. Good understanding of GMP's with experience in a med device mfg environment 5. 1-3 years related experience 6. Medical device industry experience preferred 7. Experience with reading and preparing technical documentation a must 8. Experience with quality management systems EEO We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Fair Chance Ordinance If you are applying to perform work for Terumo Neuro in any position which will involve performing at least two (2) hours of work on average each week within the unincorporated areas of Los Angeles County, you can find here a list of all material job duties of the specific job position which Terumo Neuro reasonably believes that criminal history may have a direct, adverse and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. Terumo Neuro will consider for employment qualified job applicants with arrest or conviction records in accordance with the California Fair Chance Act, Los Angeles County Fair Chance Ordinance for Employers, Fair Chance Initiative for Hiring Ordinance, and San Francisco Fair Chance Ordinance. \#LI-DNI **External-Facing Title:** Manufacturing Line Maintenance Technician **Posting Country:** US - United States **Salary Range:** $16.83 - $25.00/hour can be hire based on experience, education and skill set We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, disability, religion, national origin, gender, gender identity, gender expression, marital status, sexual orientation, age, protected veteran status, or any other characteristic protected by law.

Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. * Performs all duties as assigned and adheres to TEAM's Core Values. * Perform control valve repair in accordance to TEAM's quality procedures. * Directly communicate with customers. * Work autonomously in valve repair process. * Ensure all diagnostic, testing, and repair reports are in compliance with quality system. Job Qualifications * Education preferred: high school diploma or GED equivalent. * Minimum 3- 5 years of experience. * Control Valve Manufacturers Training Courses and/or certifications preferred. * Knowledge of HART Communicator or other diagnostic analyzer manufacturer required. * 0 to 30% minimum travel requirement. Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere. * Interaction with other crew employees, as well as supervisors and client personnel. * Working in plant and/or shop areas around production machinery with extreme noise levels. * Must be able to wear safety equipment as required by the safety department for personal protection. * May be at more than one job site in a day and must be able to tolerate climate changes. * May be required to travel out of town on a periodic basis Physical and Mental Requirements * Ability to lift and carry 75 pounds. * Must be able to walk and climb except when performing non-field duties. * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations. * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties. * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. * Ability to maintain focus and multitask effectively. * Excellent communication skills. Additional Job Description Anticipated compensation for this role is $52,000.00 - $72,800.00 per year plus benefits. Note: Disclosure as required by Cal. Lab. Code § 432.3 of the pay range for this role when being hired into our locations in California. Team reserves the right to pay more or less than the pasted range. Actual compensation will be based on experience, qualifications, and geography.

About Us: We are a leading diversified full servicing manufacturing company in greater Los Angeles area that services the Aviation and Defense Industries since 1979. We provide our customers with unparalleled service and support with experienced and skilled staff members. Customer Service is our priority. Job Functions: To oversee the general upkeep of the buildings and its infrastructure. Their role is to maintain building operations and ensure that the facilities are always safe and functional. • Plumbing knowledge to address leaks, clogs or other drainage problems, installing or repairing faucets. • Install new equipment and understand technical manuals, read blueprints and how to purchase replacement parts necessary to make equipment repairs. • Electrical wiring capabilities to manage problems with the building's electricity. Replacing light bulbs or installing new light fixtures. • Perform preventive maintenance per planned schedules. Clean and lubricate machinery. Inspect equipment operating conditions. Identify root causes of equipment problems. • Carpentry and painting, ability to handle basic repairs around the buildings, build wooden crates, drywall repair or install. • Groundskeeping, the facility contains lawns or other outdoor areas in need of maintenance • Interpersonal skills to interact with employees of the buildings in a pleasant manner • Attention to detail to ensure that all jobs are completed in an exemplary manner and any potential hazards or warning signs of problems are not overlooked • Physical stamina to handle a full shift of being active and working on the building • Other duties as assigned.

Coordinates and directs the design, planning, construction, maintenance, and alteration of equipment, machinery, buildings, and other facilities by performing the following duties personally or through departmental engineers or supervisors. This position's priorities and duties are 50% project/product management, 30% maintenance, and 20% electrical. Primary Duties & Responsibilities: Other duties may be assigned. In performing functions, duties or tasks, employees are required to know and follow safe work practices, and to be aware of Company policies and procedures related to job safety, including safety rules and regulations. All functions, duties or tasks are to be carried out in an honest, ethical and professional manner, and to be performed in conformance with applicable Company policies and procedures. In the event of uncertainty or lack of knowledge of Company policies and procedures, employees are required to request clarification or explanations from superiors or authorized company representatives. Assists the head of facilities and maintenance engineer to plan and formulate the engineering program through project planning, resource allocation and reviewing designs for compliance with Engineering requirements, Company standards, and all related specifications and regulations. Provides engineering guidance and support to the Maintenance Departments. Evaluates product designs or systems such as instruments, controls, robots, engines, machines, and mechanical thermal, hydraulic, or heat transfer systems. Drives and supports on major projects such as expansion of facilities, acquisition and installation of capital equipment, major repairs and overhauls, plant layout changes, and other related matters as directed. Assists with the preparation of interim and completion project reports including budgets and expenditures along with contracts as required for the construction and acquisition of equipment and facilities. Assure department's objectives for company-wide projects are met and documented, including Lean Manufacturing activities, department goals and objectives and targeted metrics. Directs and assists other engineers and/or maintenance personnel with Furnace Thermal Uniformity Surveys. Responsible for ensuring the various files are current for the Surveys. Reviews reports with all current Engineering department project status, including detailed schedule and budget to achieve completion. Prepares designs for new equipment for review; prepares designs for modifications to existing equipment as required. Uses CAD software to document control designs through schematics, single line drawings and panel layouts. Works closely with Maintenance and Production Departments to evaluate problems encountered with the equipment and to assist with the solutions required to resolve the problems. Works with plant Maintenance leadership to coordinate and train technicians. Training includes scheduling, determining the content of each training session and providing information to conduct training sessions. Directs and coordinates fabrication and installation activities to ensure products and systems conform to engineering design and customer specifications Assists in implementation of controls for new equipment and the upgrade of controls for existing equipment; also in the implementation of data collection projects. Programs PLC and Human Machine Interface devices on Siemens S7, WINCC and Allen Bradley RS Logix, with RS View, at the direction of Electrical Engineers.Troubleshoots equipment as requested by plant Maintenance Supervisors. Interfaces with vendors to determine the best equipment to use to keep the company's equipment at the forefront of technology. Diagnoses cause of electrical or mechanical malfunction or failure of operational equipment and performs preventative and corrective maintenance. Plans, directs, and records periodic electrical testing, and recommends or initiates modification or replacement of equipment which fails to meet acceptable operating standards. Other duties as assigned Required Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions form groups of managers, customers, and general public. Strong hands-on mechanical and electrical aptitude to understand and troubleshoot the machinery with which our control systems interface. Including: Pneumatic/Hydraulic Systems (Valves, Positioners & Feedback Devices) Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry including calculus. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Excellent communication skills verbal and written. Able to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Able to communicate freely, make presentations and discuss controversial issues in a reasonable manner. Demonstrated ability to communicate with various levels of the organization. Experience & Education Bachelor's degree in industrial, Mechanical, or Electrical Engineering 5+ years of experience in engineering in heavy industrial plant engineering management 2+ years of electrical experience and/or training Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to walk, sit, and talk or hear. The employee frequently is required to stand and use hands to finger, handle, or feel. The employee is occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 35 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, extreme heat, risk of electrical shock, and vibration. The noise level in the work environment is usually loud.

Ready to join a dynamic company in the hospitality and service industry where people help drive the success of the business? Since its inception in 1957, Invited has operated with the central purpose of building relationships and enriching the lives of our members, guests and more than 17,000 employees. We are the largest owner and operator of private clubs nationwide, with 130+ country clubs, city clubs, and athletic clubs. Our Clubs offer first-class amenities, including championship golf courses, modern workspaces, handcrafted cuisine, resort-style pools, state-of-the-art racquet facilities, fitness centers, and much more. Come be a part of this incredible and inclusive team at Invited! Job Summary The Facilities Maintenance Attendant is responsible for the upkeep, repair, and overall cleanliness of the golf club's facilities, ensuring all areas meet the highest standards of functionality, safety, and appearance. This role requires proactive attention to detail in maintaining the club's property, including indoor and outdoor spaces, to provide an exceptional environment for members and guests. The Facilities Maintenance Attendant will handle routine maintenance tasks, address repairs, and collaborate with other departments to resolve any facility-related issues promptly. Reporting Structure * Reports to the Facilities Maintenance Supervisor Day to Day * Maintain carpets clean by vacuuming and spot cleaning where necessary. Keep all floors swept, mopped, and polished, including courts, exercise rooms, stairwells, lobby and hallway areas, restrooms, and any other areas needed. * Dust and wipe down furniture, shelves, chair arms, desks, credenzas, chandeliers, pictures, televisions, woodwork, and artwork, including all ceiling HVAC registers. * Responsible for seeing that daily assignments are completed in their respective areas, to meet club standards and as communicated expectations (i.e. orderly/organized work areas, straighten/arrange entry area, picking up trash/debris, etc.). * Perform or contract facility maintenance and housekeeping repairs and maintenance including, but not limited to electrical, plumbing, HVAC systems, building equipment, carpentry, flooring, walls, ceilings, special projects, and other related areas. * Responsible for maintaining a maintenance and project checklist/schedule for preventive maintenance and ongoing improvements. * Communicate effectively with supervisor to coordinate, prioritize, document, and complete work requests from Department Heads, members, and guests. Additional Duties * Due to the dynamic nature of the club, employees are expected to assist others as needed and take on additional tasks as assigned by management. * Follow all company, club, and department policies, procedures, and instructions. * Maintain a high level of professionalism and a commitment to excellence in interactions with members, colleagues, and staff. * Follow safe working practices, ensuring compliance with safety guidelines and encouraging others to do the same. * Take the initiative in personal and professional growth and maintain any required certifications relevant to your role. * Address and resolve challenges using available resources, working with regional and corporate teams to support club operations. * Attend daily briefings and actively engage in required activities to stay informed and contribute to the team's success. About You Required * High school diploma, GED, or equivalent. * A minimum of 3 years of experience in the general facility, property maintenance, or golf club environment. Preferred * Experience in performing minor repairs, painting, plumbing, or other related maintenance tasks is highly valued. * Previous training in HVAC, electrical, plumbing, carpentry, and building maintenance. * Knowledge of and adherence to all OSHA regulations, electrical codes, and other compliance related facility maintenance. Physical Requirements * General Activity: Frequent sitting, standing, walking, and driving * Environmental Exposure: Occasional exposure to temperature changes, dust, fumes, or gases * Physical Actions: Squatting, kneeling, reaching, grasping, twisting, and bending * Lifting: Ability to lift, carry, push, or pull up to 100 lbs. on occasion • Sensory Requirements: Talking, hearing, and seeing Primary Tools/Equipment * Ladder * Construction tools * Plumbing equipment * Electrical equipment * Carpentry tools * Computer * Misc. small tools Work Schedule * Adherence to attendance requirements as outlined in the weekly schedule. * Flexibility to work additional hours as needed to meet position deadlines. * Availability to work on weekends and/or holidays as required. What We Offer We believe in taking care of our team, and our Total Rewards package reflects that commitment. Your actual base pay will be determined by your skills, experience, education, location, and-if you're in a non-exempt role-hours worked. While not all roles at Invited are full-time, those full-time team members have access to a comprehensive benefits package that includes: * Medical, dental, and vision coverage * Life insurance * Short-term and long-term disability insurance * 401(k) retirement savings plan * Generous paid time off and leave programs (time off as required by applicable law is also provided for part time team members) Want to learn more? Visit *********************** for full details. Have more questions? Check out our Invited Jobs website for more details about ClubLife, the Employee Experience, Company Benefits, and Our Culture. Be a part of our Social Networks: LinkedIn Instagram Twitter Facebook Invited is an Equal Employment Opportunity Employer The job posting outlines the general requirements for this position and is not a comprehensive list of duties, responsibilities, or requirements. Additional duties not mentioned here may be assigned as needed to ensure the smooth operation of the Club.

Job Description is for a Forklift Technicians, NOT forklift drivers Sign on Bonus - $1000 Join our dynamic team as a Forklift Technician Level 1 (Mobile) in San Marcos CA! If you have a passion for machinery and enjoy working in a hands-on environment, this is the perfect opportunity for you. As a key member of our maintenance team, you will be responsible for ensuring our fleet of forklifts operates smoothly and efficiently. We value teamwork, innovation, and a commitment to safety, and we're excited to find someone who shares these values. Responsibilities Perform routine maintenance and inspect various types of forklifts and material handling equipment. Experience in reporting mechanical issues Conduct safety inspections and ensure compliance with safety regulations. Maintain accurate records of maintenance and repair work performed. Provide excellent customer service while working on-site at customer locations. Collaborate with team members to improve processes and enhance service delivery. Stay updated on industry trends and advancements in forklift technology. Qualifications High school diploma or equivalent; technical certification in mechanics or related field preferred but not required Basic knowledge of forklift operation and maintenance. Strong problem-solving skills and attention to detail. Ability to work independently and manage time effectively. Valid driver's license and clean driving record. Excellent communication and interpersonal skills. Willingness to travel to various job sites as needed. *This position is for a Forklift Technicians, NOT for forklift drivers* About Us Namuann Hobbs is a purpose-driven company focused on innovation, quality, and impact. We operate at the intersection of creativity and strategy, with a collaborative team culture that values bold thinking, inclusivity, and continuous growth. At Namuann Hobbs, we're committed to delivering meaningful work while empowering our people to thrive. Benefits Sign on Bonus $1000 Health, Vision, and Dental Insurance - 401k Life and Disability Insurance Paid Time Off, Sick Leave, and Holidays Referral Bonus Program Monthly Performance Bonus Potential Overtime opportunities based on performance On-the-job training Work boot allowance, uniforms, and cleaning provided Company vehicle for mobile roles You should be proficient in: Mechanical Troubleshooting Skills Preventive Maintenance & Inspection Machine Safety Inspections Basic Computer Skills

Role: Facilities Maintenance Engineer I Reports to: Assistant Director Property Portfolio Program: 2400-Housing Development Department: Other Housing Projects Setting: 100% Onsite Schedule: Monday - Friday, 8am - 4:30pm Status: Full-time/Non-Exempt/Non-Management Benefits: Medical, Vision, Dental, Life Insurance, 403(b) Retirement plan, Employee Assistance Program (EAP), etc. Openings: 1 Summary: The Facilities Maintenance worker is responsible for the day-to-day cleaning and maintenance of The People Concern Willow Tree Inn. This position will ensure that The People Concern operates a clean, safe, and well-maintained facilities that meet industry and funding source standards. Essential Duties and Responsibilities: Responsible for general cleaning of the facilities which includes sweeping and mopping floors, vacuuming, washing windows, cleaning and stocking restrooms, emptying trash, etc. Assist with the completion of all minor repairs and facility rehabilitation, including interior and exterior facility grounds, buildings and equipment. Implement a schedule of regular evaluation and preventative maintenance/repair tasks of the facilities ensuring the safety of the buildings from fire, flood, and other hazards. Maintain inventory of supplies and tools. Responsible for cleaning and sanitizing of offices, restrooms, dining areas, dorms and common areas. Assist with set-up and clean-up of major events and with the pick-up, loading, and unloading of supplies and donations. Communicate regularly with all members of the team, to ensure effective two- way communication concerning maintenance issues. Implement policies and procedures that affect the use of supplies, equipment, and maintenance. Qualifications: High School Diploma, GED, or Equivalent One to three years' experience as a Facilities Maintenance worker in a commercial building, or an equivalent combination of education andexperience. Effective interpersonal communication skills and the ability to work effectively with a wide range of constituencies in a diverse community Self-starter with the ability to stay ahead of the curve and thrive in a fast-paced work environment Working knowledge of workplace safety and illness and injury prevention practices Able to read, speak, and understand directions in English Able to maintain a pleasant attitude and a customer-service orientation at all times Preferred Qualifications: Bilingual Spanish preferred Job Description Work Environment: Indoor office and outdoor residential environment On occasion walk or drive to different local sites Regularly required to sit, stand, bend and occasionally lift or carry up to 35 pounds May necessitate working in busy and loud environments May be exposed to elements like cold, heat, dust, noise, and odor May need to bend, stoop, twist, and sit throughout the day

Job Title: Maintenance Technician Duration: 5 months with possible extension Shift: M-F 7am 4pm with some scheduled OT for vendor escort Overview of Work Environment/Client Nuances: This location covers 2 office buildings, majority of work will be done on 5th St., with occasional work in Grand Ave. This is a role that requires excellent verbal and written communication skills and has a lot of interaction with the client. About the Role: As a Maintenance Technician, you will be responsible for maintaining small to medium-sized buildings, industrial systems, and equipment. This job is part of the Engineering and Technical Services job function. They are responsible for providing support, preventive maintenance, and repairs on equipment and systems. Team Overview: Candidate will be working mostly independently This is fast paced office Resource's typical working day: General office maintenance Insulation IOC Doors Wall Hangings Painting and patching Basic plumbing Basic carpentry Setting up for events - Furniture set up Vendor escorting Licenses/Certifications: n/a Must Have Skills: Good customer service skills Good trouble-shooting skills Basic plumbing Basic HVAC Basic electrical Self-starter Proactive High level of professionalism General maintenance skills Basic carpentry skills Experience with troubleshooting office appliances - Ice machines - Dish washers - Coffee machines - etc Nice to have skills: Writing proficiency Excellent communication skills Team player and flexible Years of Experience: 3-5 years Education: h.s. diploma or GED Software skills: Basic computer skills Emailing skills Lap top/tablet skills Microsoft Office Interview Process: 1st and 2nd round with H.M (Teams), 3rd round in-person with site-manager and meet and greet with client. What You'll Do:Perform ongoing preventive maintenance and repairs on mechanical, electrical, and other building systems. Conduct routine maintenance inspections, diagnose potential problems, and make repairs. Assist with the installation and modification of building equipment and systems. Review assigned work orders and partner with available systems to track completion. Support energy management by ensuring all building systems are operating efficiently. Inspect existing installations for compliance with building codes and safety regulations. Use existing procedures to solve straightforward problems. Exchange straightforward information in a clear, concise manner. Impact team through defined duties, methods and tasks as described in detail. Deliver own output by following defined procedures and processes under close supervision and guidance.

Handyman Make money with your Handyman skills on your own terms! Join Airtasker, the community platform connecting people ready to work with those who need jobs done. With Airtasker, you decide when and where you work-choose tasks that match your skills, set your own rates, and work as much or as little as you want. No startup fees, no monthly costs-just a straightforward way to turn your handyman skills into extra income, or build a career at your own pace. Complete tasks like TV mounting, fixing leaky pipes, wall repairs and more! Get started today! Why Join Airtasker? Flexible income: Be your own boss, set your own hours, and choose tasks that fit your schedule. Easy start: Most tasks require no special licensing or vetting, so you can start right away. Wide variety of tasks: Find everything from handyman work and pet care to skilled trades and creative gigs. Build your reputation: Stand out with reviews, earn badges, and increase your visibility to customers. Lower fees for loyal Taskers: Complete more tasks to enjoy lower service fees over time. Requirements: Age 18 or older Own an iPhone or Android smartphone Have the tools and skills for accepted jobs Commit to excellent customer service Keep work on the platform so we both earn! No need to apply-simply sign up on Airtasker.com, browse available tasks, and start making offers today! Start earning now!

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: NoDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. As one of the largest global security companies in the world, Northrop Grumman is proud to help our nation's military personnel navigate their next chapter into civilian careers. Approximately 20% of Northrop Grumman's 100,000 employees self-identify as veterans, and more than 2,000 are reservists. The Northrop Grumman DoD SkillBridge Program is an approved SkillBridge Program under Dept. of Defense Instruction 1322.29. The program is an opportunity for service members preparing for civilian careers to gain valuable civilian work experience during their last 6 months of service, for up to 180 days. The DoD SkillBridge Program is open to all ranks and experience levels. DoD SkillBridge participants are not eligible for compensation from Northrop Grumman, as they continue to receive military compensation and benefits as active-duty service members. Responsibilities for DoD SkillBridge Program participation are: Northrop Grumman Corporation (NGC) has developed the Northrop Grumman - DoD SkillBridge Program (DoD SkillBridge) utilizing the DoDI guidance for SkillBridge. Through this program, the service-member will work on site with their host company, gaining experience in an entry to mid-level career path. The service member will be on the job training supporting a work schedule equivalent to 40hrs per week. Outlined below are the Goals, Objectives, and Outcomes for the program. Goals - Provide separating service-members with job skills training in a professional setting during the final phase of their military service. This program is specifically designed to offer hands-on experience that result in the potential to convert to a full-time opportunity as the conclusion of the training. Participants will serve as a pipeline for high-speed, motivated military candidates into NGC. Objectives - Service Members who complete the DoD SkillBridge program will be highly trained, capable, future employees that align to the specific needs of the organization and are prepared to meet the NG mission “Defining Possible” on Day 1. This program provides comprehensive hands-on experience including professional development, networking with leadership, and training specifically focused on NG leadership principles, company history, customer/stakeholder engagement, product and service overview, and core job responsibilities. Outcome - Offer service-members preparing for civilian careers a rewarding opportunity to join the Northrop Grumman team. DoD SkillBridge Eligibility: Has served at least 180 days on active duty Is within 12 months of separation or retirement Will receive an honorable discharge Has taken any service TAPS/TGPS Has attended or participated in an ethics brief within the last 12 months Received Unit Commander (first O-4/Field Grade commander in chain of command) written authorization and approval to participate in DoD SkillBridge Program prior to start of internship. Before Applying IMPORTANT - Please download and complete the DoD SkillBridge Prescreen prior to applying to this position - DoD SkillBridge Prescreen Form Upload this form, along with your resume, during the application process Job Description: Performs installation, maintenance, and repairs on line manufacturing equipment. Locates and diagnoses failures, replaces defective components, and performs basic troubleshooting using standard electronic equipment, detailed drawings, diagrams, sketches, specifications, prints, manuals, and verbal and/or written instructions. Maintains appropriate maintenance and repair logs. Uses a variety of hand, power, and test tools and equipment. May redesign optical, vacuum, electrical, electronic, or mechanical systems for incorporation on existing manufacturing equipment. May estimate labor and equipment costs and prepare requisitions as required. Basic Qualifications: High School Diploma/GED with 2+ years of industry-related experience Experience working with electronics and test equipment MS Office experience Willing to work a flexible work schedule that includes extended shifts, may include holidays, and weekends as required US Citizenship required Preferred Qualifications: Active Secret clearance. Advanced education in electronics, electronic testing, electronic troubleshooting Developmental or operational test experience. 4 years or more of industry-related testing and troubleshooting experience. Experience with ESD (electrostatic discharge) and FOD (foreign object damage) control. Salary Range: $59,300.00 - $98,900.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. * Performs all duties as assigned and adheres to TEAM's Core Values. * Perform control valve repair in accordance to TEAM's quality procedures. * Directly communicate with customers. * Work autonomously in valve repair process. * Ensure all diagnostic, testing, and repair reports are in compliance with quality system. Job Qualifications * Education preferred: high school diploma or GED equivalent. * Minimum 3- 5 years of experience. * Control Valve Manufacturers Training Courses and/or certifications preferred. * Knowledge of HART Communicator or other diagnostic analyzer manufacturer required. * 0 to 30% minimum travel requirement. Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere. * Interaction with other crew employees, as well as supervisors and client personnel. * Working in plant and/or shop areas around production machinery with extreme noise levels. * Must be able to wear safety equipment as required by the safety department for personal protection. * May be at more than one job site in a day and must be able to tolerate climate changes. * May be required to travel out of town on a periodic basis Physical and Mental Requirements * Ability to lift and carry 75 pounds. * Must be able to walk and climb except when performing non-field duties. * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations. * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties. * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. * Ability to maintain focus and multitask effectively. * Excellent communication skills. Additional Job Description Anticipated compensation for this role is $52,000.00- $72,800.00 per year plus benefits. Note: Disclosure as required by Cal. Lab. Code § 432.3 of the pay range for this role when being hired into our locations in California. Team reserves the right to pay more or less than the pasted range. Actual compensation will be based on experience, qualifications, and geography.