Maintenance technician jobs in Mobile, AL - 298 jobs

Job Purpose: To maintain and repair all production equipment and building infrastructure. The primary responsibility of this role is to perform preventative maintenance and troubleshooting on electrical and mechanical equipment in accordance with company and industry standards. Essential Duties and Responsibilities include the following: (Other duties may be assigned.) Disassemble and assemble production equipment for replacement of worn or broken parts. Perform preventative maintenance on equipment by cleaning, lubricating and/or replacing broken or worn parts. Troubleshoot and repair electrical and mechanical equipment. Replace and/or repair electrical devices and equipment up to 480 volts, to include motors, proximity switches, conveyors etc. Perform equipment setups and changeovers for packaging equipment. Respond to requests by the production department when mechanical issues with equipment have been identified. Complete assigned tasks in a timely, accurate and efficient manner while adhering to safety, food safety, quality, and legal regulations. Perform all work in accordance with environmental, health and safety standards, rules, regulations, and practices of the facility. Qualifications: Required: Good mechanical and electrical aptitude. Ability to read, write and do basic arithmetic functions. Basic understanding of equipment manuals and electrical schematics. Demonstrated success in troubleshooting and problem solving. Familiarity with and ability to diagnose problems associated with hydraulic/pneumatic, computers & information technology, switches, PLC's, and building electric. Must be willing and able to work varying hours. Preferred: Ulma, Bizerba and Programing experience. Previous food packaging experience is preferred but not required. Prefer 1 to 2 years' experience in a similar work environment. Refrigeration experience is a plus. Working Conditions & Physical Demands: While performing the duties of this position, the employee must be able to : Lift 25 lbs. frequently with a maximum of 75 lbs. occasionally. Work in a cold and wet food processing and manufacturing facility with temperatures around 40 degrees (may vary depending on work area). Climb and work from ladders up to 15 ft. Stand/walk for up to 12 hours a day. Work in close proximity to oils, solvents, and chemicals used in production equipment. When required, perform repairs on rooftops or outdoors in inclement weather. The physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Disclaimer: This job description identifies the general duties and minimum skills required to perform this job. It is not intended to represent a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Powered by JazzHR 5xpOSiRYV2

Job Purpose: To maintain and repair all production equipment and building infrastructure. The primary responsibility of this role is to perform preventative maintenance and troubleshooting on electrical and mechanical equipment in accordance with company and industry standards. Essential Duties and Responsibilities include the following: (Other duties may be assigned.) Disassemble and assemble production equipment for replacement of worn or broken parts. Perform preventative maintenance on equipment by cleaning, lubricating and/or replacing broken or worn parts. Troubleshoot and repair electrical and mechanical equipment. Replace and/or repair electrical devices and equipment up to 480 volts, to include motors, proximity switches, conveyors etc. Perform equipment setups and changeovers for packaging equipment. Respond to requests by the production department when mechanical issues with equipment have been identified. Complete assigned tasks in a timely, accurate and efficient manner while adhering to safety, food safety, quality, and legal regulations. Perform all work in accordance with environmental, health and safety standards, rules, regulations, and practices of the facility. Qualifications: Required: Good mechanical and electrical aptitude. Ability to read, write and do basic arithmetic functions. Basic understanding of equipment manuals and electrical schematics. Demonstrated success in troubleshooting and problem solving. Familiarity with and ability to diagnose problems associated with hydraulic/pneumatic, computers & information technology, switches, PLC's, and building electric. Must be willing and able to work varying hours. Preferred: Ulma, Bizerba and Programing experience. Previous food packaging experience is preferred but not required. Prefer 1 to 2 years' experience in a similar work environment. Refrigeration experience is a plus. Working Conditions & Physical Demands: While performing the duties of this position, the employee must be able to : Lift 25 lbs. frequently with a maximum of 75 lbs. occasionally. Work in a cold and wet food processing and manufacturing facility with temperatures around 40 degrees (may vary depending on work area). Climb and work from ladders up to 15 ft. Stand/walk for up to 12 hours a day. Work in close proximity to oils, solvents, and chemicals used in production equipment. When required, perform repairs on rooftops or outdoors in inclement weather. The physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Disclaimer: This job description identifies the general duties and minimum skills required to perform this job. It is not intended to represent a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job.

Cooper Marine is searching for a Project and Maintenance Engineer to assist with project management and both reactive and preventive maintenance of its heavy equipment assets including but not limited to cranes, tugboats, barges, ship berths, docks, fleeting areas, and heavy equipment rolling stock. The ideal candidate for this position is someone with a maritime related background who is self-motivated, thorough, willing to be hands on in the field, is efficiency oriented/creative, and works well with all levels of management, skilled labor, vendors, and contractors. Responsibilities: Develop and manage capital outlay projects Assist with day to day maintenance to ensure safe, efficient operation of assets Assist with preventive maintenance programs ensuring both short- and long-term efficient operation of assets Assist with purchasing and managing of critical spare parts inventory Requirements Education B.S. in Engineering or equivalent training, education, and/or experience Preferred Requirements Ability to interpret basic engineering drawings Able to use CAD software Industrial, heavy equipment, and maritime background Experience troubleshooting mechanical and electrical systems Basic understanding of civil/structural systems including fabrication and machining work Ability to carry out projects from preliminary stages through completion including budgeting, scheduling, etc Ability to lead and direct skilled labor including direct company employees and outside contractors Other Requirements Strong commitment to a safety culture Dedication to a team environment Ability to work both inside sitting at a desk or outside on equipment/projects for long periods of time Occasional travel to visit contractors, vendors, manufacturers, and other operations

We are looking for a technical-minded Maintenance Engineer who wants to be a part of a fast-growing company. About A&R Hospitality Group: A&R Hospitality Management operates 21 hotels throughout the United States, totaling approximately 1,800 rooms and over $100 million in assets. The company partners with premium brands such as Marriott, Hilton, IHG, Wyndham, and Choice, as well as independent brands in six competitive markets. For additional information, please visit the company's website at ***************** The maintenance engineer is responsible for providing an attractive, clean, safe, and well-maintained property, using a systematic approach that maximizes guest satisfaction and properly controls labor and materials utilized. We are in search of qualified candidates who can excel at the following: Always maintain a professional appearance Maintain and repair the interior/exterior of the building, guest rooms, meeting rooms, laundry, lighting, HVAC, ventilation, water treatment systems and swimming pool. Inspect all operating systems and components of the hotel. Address and resolve guest complaints in a timely manner. Maintain a clean and organized maintenance shop. Perform preventative maintenance on all mechanical/electrical equipment, HVAC units, refrigeration, plumbing systems and guest rooms. Maintain cleanliness of hotel grounds. Assist with hotel security. Maintain accurate maintenance records. Inform management of hazardous situations, emergencies, or security threats. A&R benefits include: Competitive pay Paid vacation time Employee Assistance Program Paid training Medical/Dental/Vision Insurance Supplemental Insurance Available Free Teladoc A &R Hospitality Management provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. View all jobs at this company

We are looking for a technical-minded Maintenance Engineer who wants to be a part of a fast-growing company. About A&R Hospitality Group: A&R Hospitality Management operates 21 hotels throughout the United States, totaling approximately 1,800 rooms and over $100 million in assets. The company partners with premium brands such as Marriott, Hilton, IHG, Wyndham, and Choice, as well as independent brands in six competitive markets. For additional information, please visit the company's website at ***************** The maintenance engineer is responsible for providing an attractive, clean, safe, and well-maintained property, using a systematic approach that maximizes guest satisfaction and properly controls labor and materials utilized. We are in search of qualified candidates who can excel at the following: ∙ Always maintain a professional appearance ∙ Maintain and repair the interior/exterior of the building, guest rooms, meeting rooms, laundry, lighting, HVAC, ventilation, water treatment systems and swimming pool. ∙ Inspect all operating systems and components of the hotel. ∙ Address and resolve guest complaints in a timely manner. ∙ Maintain a clean and organized maintenance shop. ∙ Perform preventative maintenance on all mechanical/electrical equipment, HVAC units, refrigeration, plumbing systems and guest rooms. ∙ Maintain cleanliness of hotel grounds. ∙ Assist with hotel security. ∙ Maintain accurate maintenance records. ∙ Inform management of hazardous situations, emergencies, or security threats. A&R benefits include: ∙ Competitive pay ∙ Paid vacation time ∙ Employee Assistance Program ∙ Paid training ∙ Medical/Dental/Vision Insurance ∙ Supplemental Insurance Available ∙ Free Teladoc A &R Hospitality Management provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. View all jobs at this company

Oversees property maintenance of grounds, pools, building facilities and guest rooms. Responsible for daily upkeep, preventive maintenance, small repair and tasks, special projects, and communicating larger maintenance needs to the General Manager. Duties and Responsibilities General 1. Ensure the best possible lodging experience for each guest. 2. Execute and follow the preventative maintenance procedures and guidelines. 3. Follow proper grooming and appearance guidelines. 4. Wear a provided maintenance uniform and nametag at all times on property. 5. Order and install small maintenance items as needed for repair, under direction of the General Manager. 6. Ensure par stocking of regularly used parts and supplies. 7. Complete tasks and assignments on the daily Maintenance Checklist. 8. Prioritize and complete Maintenance Request Forms ASAP. 9. Complete Preventive Maintenance program on a timely basis. 10. Ability to work flexible hours. 11. Respond to maintenance emergencies on a 24 hour call basis. 12. Practice safe working conditions under Occupational Safety and Health Administration guidelines to include Bloodborne Pathogens. 13. Practice safe chemical handling as prescribed in Material Safety and Data Sheets. 14. Perform and document chemical readings from the swimming pool and the spa. Certified Pool Operator will be required within first 30 days of employment. 15. Program telephone equipment according to hotel needs. 16. Observe equipment and utility meter readings. 17. Learn emergency procedures and fire alarm panel. 18. Serve in the capacity of Manager On Duty (MOD) if needed. 19. Perform any and all duties not specifically outlined above that are an inherent part of the position. Perform and execute any requests made by corporate or supervisor in a cooperative and expeditious manner. Skills Needed Ability to read, write and speak English with excellent grammar and communication skills (written and verbal). General knowledge of heating, air conditioning, electric and plumbing skills. Knowledge and ability to use basic work tools and equipment. Ability to patch holes, clean carpets, and paint walls. Ability to work well under limited supervision. Ability to lead others. Ability to manage others virtually. Strong work ethic. Valid drivers license Skill Preferences Apartment, building, or lodging maintenance experience. Physical Requirements Ability to bend at waist and work on knees. Ability to reach over head. Ability to stand for long periods of time. Ability to walk three flights of stairs. Ability to work outside in hot or cold weather. Ability to lift and carry 50 pounds. View all jobs at this company

Perform complete over-haul and testing of all manufacturers' pressure relief valves to include: Farris, Consolidated, Crosby, Anderson-Greenwood and others. Execute trouble-shooting and testing in shop and field environments. Directly reports to the Operations Manager. Essential Job Functions Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. Performs all duties as assigned and adheres to TEAM's Core Values. Performs pressure relief valve repair in accordance to TEAM's National Board Inspection Code approved quality manual. Directly communicates with customers. Works autonomously in valve repair process. Ensures all testing and repair reports are in compliance with quality system and National Board Inspection Code criteria. Job Qualifications Education preferred: high school diploma or GED equivalent. Minimum 3- 5 years of experience. Pressure Relief Valve Manufacturers Training Courses and/or certifications, National Board of Boiler and Pressure Vessel Inspectors training course preferred. Knowledge of Trevitest, EVT, AVK, or other in-line test equipment preferred. Solid working knowledge of the ASME and NBIC codes. 0 to 30% minimum travel requirement. Work Conditions Position is based out of a branch or site location. Field duties require indoor and outdoor work in a plant atmosphere. Interaction with other crew employees, as well as supervisors and client personnel. Working in plant and/or shop areas around production machinery with extreme noise levels. Must be able to wear safety equipment as required by the safety department for personal protection. May be at more than one job site in a day and must be able to tolerate climate changes. May be required to travel out of town on a periodic basis Physical and Mental Requirements Ability to lift and carry 75 pounds. Must be able to walk and climb except when performing non-field duties. Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations. Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties. Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. Ability to maintain focus and multitask effectively. Excellent communication skills. TEAM provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionAbout Us RENOVO is a trusted Property Preservation and Maintenance company-committed to delivering disciplined, cost-effective, and high-quality services. Our work reflects military-grade reliability, local expertise, and unwavering integrity. We specialize in preservation, maintenance, and rehabilitation services for both residential and commercial properties. Position Overview We are seeking a skilled and dependable general handyman Technician to join our growing team. The ideal candidate will have hands-on experience diagnosing, installing, and repairing household and commercial issues such as plumbing, electrical, roofing, drywall, painting, flooring, garage doors, and windows, with precision, quality, and professionalism. Key Responsibilities Diagnose and troubleshoot various household and commercial issues accurately. Perform installations, repairs, and replacements efficiently while maintaining quality standards. Take detailed pictures of each job, including clear photos of product labels and completed work. Prepare a thorough diagnosis report with recommended repair or replacement solutions and pricing estimates. Maintain a clean and professional appearance at job sites. Communicate effectively and courteously with customers, ensuring complete satisfaction. Adhere to all scheduled appointments-punctuality and reliability are a must. Requirements Proven experience in household and commercial issues repair (minimum 5 years). Strong understanding of various appliances: refrigerators, washers, dryers, ovens, dishwashers, etc. Must own a reliable vehicle and be willing to travel up to 50 miles for work. Possess all basic tools required for appliance repair and installation. Excellent problem-solving and communication skills. Professional, well-behaved, and customer-focused attitude. Must be committed, punctual, hardworking, and maintain a positive reputation with clients. Why Work With RENOVO Transparent and timely payments. Continuous workflow from a trusted preservation company. Supportive management and clear communication. Opportunity to grow with a reliable and reputable brand. Powered by JazzHR TjxaCz05zg

We are looking for an experienced handyman to join our team full time. As Handyman\/Carpenter, you are a key member of our team responsible for quality repairs, remodeling, and home improvement projects. You will build customer relationships and uphold our standard for excellent customer service. Exemplifying our code of values, you show respect and courtesy to all customers and employees. You have a strong background of skilled tradesman experience, and have proven communication skills with supervisors, employees, and customers. You are self\-motivated, thrive in fast moving environments, and able to manage time to effectively meet deadlines. Requirements Skilled tradesman with 3+ years of experience in construction. Strong carpentry background. Team player who can work independently. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"653176156","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Hardware"},{"field Label":"Work Experience","uitype":2,"value":"4\-5 years"},{"field Label":"City","uitype":1,"value":"Mobile"},{"field Label":"State\/Province","uitype":1,"value":"Alabama"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"36602"}],"header Name":"Experienced Handyman","widget Id":"417767000000072311","is JobBoard":"false","user Id":"417767000000181003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":true,"job Id":"417767000005862222","FontSize":"12","google IndexUrl":"https:\/\/krshrc.zohorecruit.com\/recruit\/ViewJob.na?digest=mTYiJKZ4mm9DMG9J5k1AgeR9sVwe5K2gcmyirW7MlSo\-&embedsource=Google","location":"Mobile","embedsource":"CareerSite","logo Id":"b4dx1fa6679ef38494e05a88f4245264c1d30"}

Advance Your Career with Altrad Sparrows! Ready to embrace new opportunities and challenges? Altrad Sparrows, a part of Altrad Group, is a global provider of specialist engineering, inspection, operations and maintenance services to the offshore energy, renewables and industrial markets. Our solutions support our clients to optimize their efficiency by ensuring the performance, reliability and safety of critical equipment and people. With our headquarters in France, we employ over 52,000 people across numerous operational locations within the Americas, Europe, Middle East, Africa and Asia Pacific. Position: Industrial Millwright Main Responsibilities: Installation and Maintenance: Install, repair, and maintain commercial and industrial machinery in various settings, including buildings, plants, and manufacturing facilities. Ensure all machines operate efficiently through troubleshooting and preventative maintenance. Inspection and Measurement: Inspect used parts to determine dimensional changes using tools such as rules, calipers, and micrometers. Adjustment of Equipment: Adjust functional parts of devices and control instruments using hand tools, levels, plumb bobs, and straightedges. Safety and Compliance: Ensure the correct and safe operation of equipment and machinery using the customer's onsite maintenance management system (CMMS). Technical Reading: Read diagrams, schematic drawings, and service manuals to establish work procedures. Troubleshooting: Diagnose and maintain engines, conveyors, electrical systems, and pneumatic and hydraulic equipment. Precision Fitting: Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances. Fault Identification: Identify faulty equipment through observation and testing metrics. Parts Management: Identify and request necessary replacement parts to perform repairs. Collaboration: Work with the facility manager to continually update production processes and system software as applicable. Meeting Participation: Attend daily shift meetings to prioritize work orders and minimize downtime. Safe Operation: Safely operate cranes, power tools, hoists, and hand tools. Inventory Management: Maintain an inventory of parts and tools. Documentation: Prepare maintenance reports and summaries using daily activity logs and work tickets. Continuous Learning: Maintain knowledge of electrical, pneumatic, hydraulic, and mechanical systems through ongoing training, industry workshops, and technical reading. Qualifications and Experience: Experience: Minimum of 3 years of installation, repair, and maintenance of commercial and industrial machinery. Strong knowledge of electrical, pneumatic, hydraulic, and mechanical systems is essential. OSHA Knowledge: Familiarity with OSHA standards and requirements. Communication Skills: Strong oral and written communication abilities. Repair Skills: Proficient in repair techniques. Driving Record: A good driving record is essential. Independence: Ability to perform tasks independently. Education: High School Diploma or equivalent. WE OFFER: A Commitment to Excellence: We support the global energy industry by optimizing the performance, reliability, and safety of critical equipment and people through our engineered products and services. Growth Opportunities: As a leading energy services contractor, we provide high-quality specialist equipment and integrated engineering services, ensuring our employees are part of a growing and dynamic team. Core Values: We foster a workplace built on Respect, where everyone is valued; Solidarity, promoting teamwork and collaboration; Courage, encouraging innovative thinking; Humility, embracing diverse perspectives; and Conviviality, creating a positive and inclusive environment. Benefits: Health insurance Dental insurance Vision insurance 401(k) 401(k) matching Life insurance Paid time off Referral program Retirement plan All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. **Candidates applying for US based positions must be eligible to work in the U.S. without sponsorship. ** #LI-TF1 Altrad Sparrows is an EEO Employer - M/F/Disability/Protected Veteran Status View all jobs at this company

Morin Repair Service is seeking an experienced Industrial Mechanic to join our team. The ideal candidate will have a strong background in mechanical systems and be able to troubleshoot and repair a variety of industrial equipment. Morin has been recognized as superior in equipment sales, distribution, repair, and service. This is your chance to become a part of a hard working, dedicated team! Responsibilities: * Perform routine maintenance on industrial equipment * Troubleshoot and repair mechanical systems * Install new equipment and machinery If you are a skilled Industrial Mechanic looking for a challenging and rewarding opportunity, we encourage you to apply for this position. We offer competitive compensation and benefits packages, as well as opportunities for career growth and advancement within our organization. Requirements * High school diploma or equivalent * Prior experience as an Industrial Mechanic * Ability to read and interpret technical manuals and schematics * Strong attention to detail and problem solving skills * Good communication skills

Job DescriptionNOW HIRING: Facility Maintenance SpecialistTemp-to-Hire | Full-Time | Weekly Pay Snelling Staffing Services is seeking a skilled Facility Maintenance Specialist who takes pride in keeping facilities running safely, smoothly, and efficiently. If you're a hands -on problem solver with solid maintenance experience, this could be your next long-term opportunity. Why You'll Want to Apply Steady 40-hour workweek with varied shifts Temp-to-Hire opportunity with a reputable employer Weekly electronic pay Medical, Dental & Vision insurance available Fast interview process for qualified candidates What You'll Be Doing Under the direction of the Maintenance Manager, you will: Perform general facility maintenance and repairs Handle basic electrical, plumbing, HVAC, drywall, and painting work Complete preventive maintenance to reduce downtime Respond promptly to maintenance emergencies and follow safety protocols Ensure all work complies with EPA, HAZMAT, and OSHA regulations Stand for extended periods and lift heavy objects as required What We're Looking For Required: High School Diploma or GED 3+ years of facility maintenance experience, including commercial kitchens Strong communication and customer service skills Ability to prioritize tasks and follow procedures Dependable, safety-focused work ethic Bonus Skills (Not Required): Machine troubleshooting Mechanical or hydraulic experience Pre-Employment Requirements Background check Drug screening DOT Physical Ready to Take the Next Step? Qualified candidates should submit their resume for immediate consideration at www.mobile.snelling.com. Resumes are reviewed promptly, and selected candidates will be contacted to schedule an interview. About Snelling Staffing Services Founded in 1951, Snelling is a national staffing and recruiting leader with a locally owned, award-winning Mobile office. We specialize in matching great people with great opportunities-quickly and efficiently.

We are looking for a technical minded Maintenance Engineer who wants to join our team and make the guest experience even more magical. The maintenance engineer is responsible for providing an attractive, clean, safe, and well-maintained property, using a systematic approach that maximizes guest satisfaction and properly controls labor and materials utilized. We are in search of qualified candidates who can excel at the following: Always maintain a professional appearance Maintain and repair the interior/exterior of the building, guest rooms, meeting rooms, laundry, lighting, HVAC, ventilation, water treatment systems and swimming pool. Inspect all operating systems and components of the hotel. Address and resolve guest complaints in a timely manner. Maintain a clean and organized maintenance shop. Perform preventative maintenance on all mechanical/electrical equipment, HVAC units, refrigeration, plumbing systems and guest rooms. Maintain cleanliness of hotel grounds. Assist with hotel security. Maintain accurate maintenance records. Inform management of hazardous situations, emergencies, or security threats. View all jobs at this company

The Role Installs, maintains, overhauls, services, operates and repairs plant mechanical and accessory equipment. Works from blueprints, sketches, work orders, state, municipal and underwriters ordinances and specifications and written and verbal instructions. Installs and relocates various types of machines and mechanical equipment such as drill presses, power saws, air compressors, gasoline engines, and vacuum pumps. Repairs and maintains above equipment and determines the work necessary to prevent breakdown or major overhaul of equipment. Determines when equipment should be shut down to accomplish major overhaul. Installs, connects, and tests mechanical equipment, repairing, replacing or taking other corrective action, as required. Locate trouble causing breakdown of machines or equipment and determine method of repair and sequence of operations; perform repairs, replacing worn or broken partsl and reassemble, reinstall, and check out for efficient operation. Performs incidental related duties as assigned. Must Have Applicant must have 3-5 years experience diagnosing and repairing all types of industrial, manufacturing, fabrication and lifting and handling equipment. Nice to Have 5 years experience diagnosing and repairing all types of industrial, manufacturing, fabrication and lifting and handling equipment.

Job DescriptionOur busy hotel is seeking an energetic, customer-oriented maintenance engineer to ensure that all of our visitors have an excellent experience at our property. You'll be in charge of the building's maintenance and preventative programs daily to ensure people's enjoyment, health, and safety. The ideal candidate for this position will be an outstanding communicator, a team player, and, above all, someone who enjoys engaging with new people. If you're ready to get started, apply today!Compensation: $16 hourly Responsibilities: React to emergencies that happen before, during, and after your regular work shifts Work with a variety of tools hammers and screwdrivers, indicators and edge finders, drills, wrenches, and other maintenance tools of the trade Take care of guest complaints regarding building maintenance and troubleshoot issues Work in collaboration with other technicians who will assist you with a variety of maintenance tasks Follow all engineering safety rules and regulations Maintain all of the hotel's equipment and preventative maintenance plans Create an available channel of communication between you and other staff, including managers and department heads Qualifications: Applicants must have 2-4 years of experience in maintenance This position requires a high school diploma or equivalent GED Stellar communication, organizational, and interpersonal skills are needed You should have the ability to lift and carry up to 50 lbs. Driver's license and outstanding driving record is necessary About Company Encore Enterprises is an equal opportunity employer with great benefits and a rapidly growing portfolio. To learn more about Encore Enterprises please visit encore.bz Courtyard by Marriott and Fairfield by Marriott properties are located in the urban/suburban area of Mobile, AL in the town of Spanish Fort.

Flotech is a subsidiary of FloWorks International LLC, which is a privately held company located in Pasadena, Texas. As a Valve Technician you are responsible for performing maintenance, assessment, repair and testing on various types of industrial valves. This position has no supervisory responsibilities. Responsible for repair and testing of various valves, including but not limited to ball valves, gate valves, butterfly valves, safety relief valves, etc. Perform disassembly, cleaning, inspection, measuring, reassembly and testing of valves at Flotech facilities and client locations. Follow all schematics and documented procedures in accordance with all Quality Control and ASME National Board standards that apply to the job. Thoroughly complete all calibration and documentation associated with testing and repairs. Travel to job sites and adhere to all site safety and performance requirements. Communicate timely updates to management, co-workers and customers to ensure timely and successful completion of job responsibilities. Works closely with co-workers, management and safety coordinator to ensure compliance with OSHA and other safety regulations. Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly. A must... High School Diploma or GED and a minimum of 2 years industrial valve repair experience, or equivalent number of years of education and experience. Familiar with tools and machinery required to perform daily valve repair duties. Experience with repairing various valves and actuators, whether pneumatic, hydraulic or electric. Valid Driver's License. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Ability to add, subtract, multiply and divide all units of measure, using whole numbers, common fractions and decimals. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. The rewards that await you here.... Tuition Reimbursement! 401K + Match! Employee Referral Program: You get paid for referring top talent! FloWorks Cares Charity Program: Volunteer time off! PHYSICAL DEMANDS AND WORK ENVIRONMENT: Frequent exposure to fumes or airborne particles. Frequent exposure to loud noises. Continually required to stand, walk, bend, crouch and climb. Continually required to use hands and fingers and reach with arms. Frequently required to lift up to 50 lbs. Continually required to talk or hear. Occasionally exposed to outdoor weather conditions (heat, cold, rain). Travel up to 75%. This information indicates the general nature and level of work performed by associates in this role. It is not designed to contain a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this role. This description supersedes any previous or undated descriptions for this role. Management retains the right to add or change the duties of the position at any time. Questions about the duties and responsibilities of this position should be directed to the reporting Manager or Human Resources. FloWorks is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or protected veteran status. FloWorks is committed to fostering a culture where every individual is valued and empowered to contribute to a shared success. FloWorks participates in the US Government's E-Verify program.

Maintenance Engineer Job Description Maintenance Engineer FLSA Class: Hourly Non-Exempt Reports to: General Manager Job Summary: The maintenance engineer is responsible for providing an attractive, clean, safe and well-maintained property, using a systematic approach that maximizes guest satisfaction and properly controls labor and materials utilized. Duties and Responsibilities: ❑ Maintain and repair the interior and exterior of the building, guest rooms, meeting rooms, laundry, lighting, HVAC, ventilation, water treatment systems, and swimming pool. ❑ Inspect all operating systems and components of the hotel to ensure they are operating properly, efficiently and safely. ❑ Communicate and enforce all hotel policies and procedures. ❑ Inform management of hazardous situations, emergencies or security threats. ❑ Maintain a clean and organized maintenance shop and for the security of hotel inventory. ❑ Assist all guests in a sincere and courteous manner while going the extra mile and doing whatever it takes to ensure guest satisfaction. ❑ Understand and respond to customer needs and ensure a high level of guest satisfaction. ❑ Perform preventative maintenance on all mechanical/electrical equipment, HVAC units, refrigeration, plumbing systems, and guest rooms while maintaining accurate records of all work performed. ❑ Ensure everyone in the department is trained and uses Quore on a daily basis. ❑ Maintain the cleanliness of hotel grounds. ❑ Assist with hotel security to minimize risk of theft, crime, and other hazards. ❑ Follow and adhere to all standards and regulations set forth by designated hotel and as directed by management. ❑ Be a Brand Ambassador of A&R's Culture, Mission and Values. Required Skills and Experience: ❑ Previous hospitality industry experience preferred but not required ❑ Able to accept directions and priorities from members of management and reliably follow through on tasks. ❑ Proficient in Quore. ❑ Highly energetic and motivated individual ❑ Ability to lift up to 50 pounds. ❑ Ability to work with machinery both indoors and outdoors. ❑ Ability to work independently with little supervision. ❑ Excellent interpersonal and communication skills with strong customer/client focus essential ❑ Strong problem-solving skills ❑ Ability to work in a fast-paced, high pressure environment ❑ Ability to shift and manage multiple priorities while adapting easily to change ❑ Results driven focus and ability to work through to completion in a timely manner ❑ High level of flexibility regarding overtime during busy periods as required by the business View all jobs at this company

We are looking for a technical-minded Maintenance Engineer who wants to be a part of a fast-growing company. About A&R Hospitality Group: A&R Hospitality Management operates 21 hotels throughout the United States, totaling approximately 1,800 rooms and over $100 million in assets. The company partners with premium brands such as Marriott, Hilton, IHG, Wyndham, and Choice, as well as independent brands in six competitive markets. For additional information, please visit the company's website at ***************** The maintenance engineer is responsible for providing an attractive, clean, safe, and well-maintained property, using a systematic approach that maximizes guest satisfaction and properly controls labor and materials utilized. We are in search of qualified candidates who can excel at the following: ∙ Always maintain a professional appearance ∙ Maintain and repair the interior/exterior of the building, guest rooms, meeting rooms, laundry, lighting, HVAC, ventilation, water treatment systems and swimming pool. ∙ Inspect all operating systems and components of the hotel. ∙ Address and resolve guest complaints in a timely manner. ∙ Maintain a clean and organized maintenance shop. ∙ Perform preventative maintenance on all mechanical/electrical equipment, HVAC units, refrigeration, plumbing systems and guest rooms. ∙ Maintain cleanliness of hotel grounds. ∙ Assist with hotel security. ∙ Maintain accurate maintenance records. ∙ Inform management of hazardous situations, emergencies, or security threats. A&R benefits include: ∙ Competitive pay ∙ Paid vacation time ∙ Employee Assistance Program ∙ Paid training ∙ Medical/Dental/Vision Insurance ∙ Supplemental Insurance Available ∙ Free Teladoc A &R Hospitality Management provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. View all jobs at this company

We are seeking a Central Utilities Maintenance Technician to be part of our team in Calvert, North Mobile County, AL. Objective: To assist in maintaining the entire plant site utilities and facilities, including HVAC, compressed air, boilers, RO water production plant, ammonia system, cooling towers, natural gas odorant injection station, sanitary sewer lift stations, building structure, and building plumbing with a prioritization of safety, compliance, quality, profit, communication, development, and presentation. Requirements: * High school diploma * Manufacturing industry experience working with HVAC, air compressor, buildings, boilers, ammonia, RO Water production, and/or utilities experience * Preference given to those with a refrigerant handing certification Job Responsibilities: This position is responsible of but not limited to the following equipment and/or tasks. Daily operations and maintenance of the CRW and MS Utilities including: * Compressed air systems at the CRW and Melt Shop * Cooling Towers * Boilers * Ammonia system * RO Water production plant * Water Softener System Skid * Natural Gas Odorant Injection Station * Conduct preventive and corrective maintenance of Boilers and their components in the CRW * Conduct preventive and corrective maintenance of the CRW RO Water Production Plant * Conduct preventive and corrective maintenance of all Compressed Air Equipment * Conduct preventive and corrective maintenance of all Anhydrous Ammonia Equipment * Conduct preventive and corrective maintenance of all Cooling Towers and components * Conduct preventive and corrective maintenance of the Natural Gas Odorant Injection Station * Conduct preventive and corrective maintenance of Sanitary Sewer Liftstations and their components * Conduct preventive and corrective maintenance of all HVAC equipment * Troubleshoot all HVAC equipment * Conduct preventive and corrective maintenance of all buildings and utilities equipment * Underground utilities piping throughout entire site * Conduct preventive and corrective maintenance of plumbing and plumbing fixtures * Conduct preventive and corrective maintenance of rolling doors * Read and understand piping drawings Physical requirements: * Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards * Must have the ability to climb in a safe manner (climbing as a minimum includes stairs and ramps) same as ability to walk long distances and demonstrate good balance on uneven terrain or maneuvering obstacles * Ability to withstand exposure to elevated ambient temperature for extended periods of time * Must be able to work in extreme heat * Exposure to wet and/or humid conditions, vibrations, dust and asphalt * Must be able to work in a high noise environment where the use of hearing protection is required * Ability to frequently use hand or fingers to handle or feel objects/materials * Ability to work in areas with strong magnetic fields * Bend, twist, lift, stand, walk, reach, see, move, and hear as required by specific position * Ability to frequently reach with hands and arms * Must be able to communicate utilizing radios, phones and/or intercom systems * Ability to perform physically demanding work including lifting and/or moving up to 50 lbs. utilizing proper lifting techniques * Ability to safely use power and hand tools Salary: 35.13 hr What we offer: * Competitive benefit package including health, dental, disability, life and voluntary insurance options. * Time to recharge through PTO plus paid holidays and parental leave. * Work-life balance with a flexible work schedule so you can focus on your professional and personal priorities. * Retirement plan and company matching * Employee Assistance Program. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, age, citizenship, color, religion, sex, marital status, national origin, disability status, gender identity or expression, protected veteran status, or any other characteristic protected by law. If you need an accommodation to complete any part of the application process due to a disability or medical condition, you may call ************ or email *********************************** Nearest Major Market: Mobile AL Apply now " Find similar jobs: