Maintenance technician jobs in Tampa, FL

Lutheran Services Florida (LSF) envisions a world where children are safe, families are strong, and communities are vibrant. LSF is looking for a talented Maintenance Technician who wants to make an impact in the lives of others. Applicant must have a valid current FL DL and be able to clear Motor Vehicle Record (MVR) check! The schedule for this role is Monday through Friday! Purpose & Impact: The Maintenance Technician under the direction of an assigned supervisor, performs required maintenance and repair duties necessary to maintain assigned facilities; perform a variety of carpentry, electrical, painting, and plumbing repair and maintenance work; perform routine and emergency repairs and adjustments to buildings and facilities. Participates in the HS/EHS Quality Assurance efforts. This position is not eligible for remote or hybrid work. Essential Functions: Performs required maintenance and repair duties necessary to maintain assigned facilities and buildings by performing a variety of carpentry, electrical, painting, and plumbing repair and maintenance work; perform routine and emergency repairs and adjustments to buildings and facilities. Install and repair a variety of electrical components including lights, wall outlets, and switches. Repair and replace plumbing fixtures including faucets, fixtures, washers, and gaskets. Perform carpentry work including the construction, installation, and repair of cabinets, partitions, bulletin boards, shelving, windows, doors, desks, chairs, and related items; install necessary hardware. Perform minor repairs and adjustments to equipment and facilities including changing air filters, repairing heating and air conditioning units, and perform minor concrete work including the repair of sidewalks. Unlock and lock doors; turn off alarms; turn on lights and outside code pads; issue alarm codes to employees and provide training on alarm use. Move and arrange furniture and equipment; set-up rooms for meetings and special events; ensure security of facilities including locking and unlocking doors. Assist in maintaining supply inventory and ordering necessary supplies; receive and store materials and supplies; pick up supplies and equipment as necessary; Inspect buildings, grounds, and equipment to identify maintenance, repair, and replacement needs; report safety, sanitary, and fire hazards. Perform custodial duties to maintain buildings and facilities in a clean and desirable condition as assigned; sweep, vacuum, mop, wax, strip, and polish floors; vacuum and shampoo carpets; dust and polish furniture, woodwork, fixtures, and equipment; wash windows, mirrors and walls; clean desks and counter tops; empty, clean, and sanitize waste receptacles. Clean and sanitize restroom facilities and fixtures including mirrors, sinks, urinals, toilets, and partitions; replenish supplies in restrooms including filling soap and towel dispensers. Clean light fixtures; replace lights, bulbs, and fluorescent tubes as necessary. Perform work in adherence to safe work practices and procedures and in compliance with applicable standards. Attends safety training and participates in staff meetings and in-services activities as directed. Maintains strict confidentiality with respect to Head Start/Early Head Start children, families and staff in accordance with established policies and procedures. Other duties as assigned. Other Functions: Note: The above duties are illustrative and not exhaustive. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. Depending on assigned area of responsibility, incumbents in the position may perform some or all of the activities described above. Education: High school diploma or GED. Graduation from technical trade school preferred. Experience: Two (2) years of experience performing general maintenance and repair duties, preferably in an institutional or educational environment. Bilingual preferred: English/Spanish or English and other languages present in the local area. Also required: Successful completion of a Level II background screening, local criminal record check and drug screening prior to hiring. Licenses and Other Requirements: Must possess a valid Florida drivers' license and certifications necessary to drive all vehicles as required. Knowledge, Skills, Abilities: Skill in the operation and use of hand and power tools and equipment. Knowledge of basic record keeping techniques. Knowledge of methods, equipment and materials used in general maintenance work. Knowledge of health and safety procedures. Knowledge of proper methods of storing equipment, materials and supplies Knowledge of basic theory of electricity. Knowledge of basic heating, ventilation, and air conditioning systems. Knowledge of operational hazards and standard safety practices necessary in the area of assigned work. Ability to use common cleaning equipment and supplies safely and efficiently. Ability to observe and report safety hazard and need for maintenance and repair. Ability to learn the policies, procedures, and codes related to building, maintenance, and repair. Ability to read and interpret sketches, drawings, diagrams, and blueprints. Ability to understand and follow oral and written instructions. Ability to communicate clearly and concisely, both orally and in writing. Ability to establish and maintain a cooperative and effective working relationship with others. Physical Requirements: Ability to stand, walk, bend, climb, kneel, and stoop for extended periods. Must be able to lift and carry up to 50 pounds regularly, and occasionally up to 75 pounds with assistance. Comfortable working in various environmental conditions including hot, cold, damp, and noisy areas. Ability to work on ladders, scaffolds, and at heights as needed. Manual dexterity required for operating tools, handling small parts, and using maintenance equipment. Visual acuity to read blueprints, technical manuals, and work orders. Must be able to wear personal protective equipment (PPE) including gloves, safety glasses, and hearing protection as required. Reasonable accommodation may be made for otherwise qualified persons with disabilities. Other: Must demonstrate sensitivity to our service population's cultural and socioeconomic characteristics and needs. Principal Accountabilities: Team player with co-workers and center/office staff. Cost effective program operations. Adherence to agency policies and management practices. Why work for LSF? LSF offers 60 programs across the state of Florida serving a wide range of populations in need. Mission Driven staff members become part of the LSF community while transforming the lives of those in need. Our staff additionally find growth opportunities as they explore areas of interest within the organization. Amazing benefits package including : Medical, Dental and Vision Telehealth (24/7 online access to Doctors) Employee Assistance Program (EAP) Employer paid life insurance (1X salary) 13 paid holidays + 1 floating holiday Generous PTO policy (starting at 16 working days a year) Note: Head Start employees paid time off and holiday schedule may differ 403(b) Retirement plan with 3% discretionary employer match OR 3% student loan repayment reimbursement Tuition reimbursement LSF is proud to be an equal opportunity employer. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Role - Electro-Mechanical Technician Salary - $70,000 - $90,000 per year (dependent on experience) Type - Permanent My client is a well-established machinery manufacturer specializing in the design and build of automated production equipment. They are looking to add an experienced Electro-Mechanical technician to their team to support the assembly, testing and installation of complex industrial systems. This is a hands-on, workshop-based role working closely with mechanical, electrical, and controls engineers to build high-quality automated machinery from start to finish, including installation on customer sites throughout the US. The Electro-Mechanical Technician will have the following attributes: 3+ years of experience in electro-mechanical assembly for industrial or automated machinery. Strong mechanical aptitude with the ability to assemble precision components and subassemblies. Skilled in electrical wiring, cable routing, and connecting motors, sensors, and control panels. Familiar with pneumatic components, actuators, and related systems. Able to read and interpret mechanical drawings, wiring diagrams, and schematics. Competent in the safe use of hand tools, power tools, and basic electrical test equipment. Organized, detail-oriented, and committed to high-quality workmanship. Comfortable collaborating with engineers and technicians in a team-based environment. The Electro-Mechanical Technician's role will involve: Assembling mechanical and electrical components to build automated machinery and systems. Wiring electrical panels, sensors, and pneumatic circuits to specification. Performing functional tests, mechanical alignments, and assisting with troubleshooting. Supporting system integration and machine validation alongside the engineering team. Maintaining accurate build documentation and following established quality procedures. Contributing to continuous improvement initiatives across the assembly process. For more information about this Electro-Mechanical Technician opportunity, please apply, or email Jack Smillie at *******************, who will be able to provide more details on the position. Many thanks, Premier Group

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here . Job Posting External Job Duties Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Minimum Qualifications Less than 2 years related experience High school diploma or equivalent Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. Good written/verbal communication and customer care skills. Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. Industry related training is preferred Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities

Department: Facilities & Maintenance Reports To: Manager, Facilities and Maintenance American Injectables is a rapidly growing pharmaceutical CDMO specializing in sterile injectable drug products. With a state-of-the-art facility and a commitment to FDA compliance and operational excellence, we support our clients in bringing high-quality injectable therapies to market. We're looking for a hands-on, motivated Maintenance & Facility Technician I to help keep our equipment, processes, and facility running smoothly. Position Summary We are seeking a reliable and detail-oriented Maintenance & Facility Technician I to join our team. This individual will be responsible for performing routine maintenance, troubleshooting, calibration, and repairs on both facility systems and process equipment. The ideal candidate is a self-starter with a passion for mechanical and electrical systems, who thrives in a fast-paced, highly regulated environment. This role is hands-on and dynamic-you will support day-to-day operations, repair and maintain process machinery, assist with moving and staging materials, and help ensure that our pharmaceutical facility operates at the highest standards of safety and reliability. Key Responsibilities Facility & Equipment Maintenance Perform routine and preventive maintenance on facility systems, utilities, and production equipment. Troubleshoot and repair mechanical and electrical equipment as issues arise. Assist with the installation, modification, calibration, and qualification of machinery and systems. Support maintenance of HVAC, compressed air, and utility infrastructure. Operations Support Safely move, lift, and stage supplies, materials, and equipment as needed. Operate forklifts and other material-handling equipment (training provided if needed). Assist in maintaining a clean, organized, and compliant facility environment. Technical Skills Read, interpret, and work from electrical schematics, P&ID diagrams, and engineering documents. Apply basic knowledge of electrical controls and instrumentation (experience a plus). Execute calibration activities in compliance with cGMP standards and document results accurately. Utilize Blue Mountain Regulatory Asset Management software for work orders, calibration, and preventive maintenance tracking. Collaboration & Continuous Improvement Work closely with the Facilities and Manufacturing teams to ensure minimal downtime and smooth operations. Identify opportunities for process improvements and contribute to problem-solving initiatives. Take ownership of assigned tasks and follow through with minimal supervision. Qualifications High school diploma or equivalent required; technical/vocational training in mechanics, electrical, or facilities maintenance preferred. 1+ years of hands-on experience in maintenance, facilities, or mechanical/electrical repair (pharma or manufacturing experience a plus). Experience with equipment calibration activities in a regulated environment preferred. Familiarity with Blue Mountain Regulatory Asset Management software strongly preferred. Ability to safely operate forklifts and material-handling equipment (certification a plus). Basic understanding of electrical controls, schematics, and P&ID drawings. Strong mechanical aptitude and a passion for working with tools and equipment. Ability to lift and move up to 50 lbs and perform physically active tasks. Self-starter with strong work ethic, reliability, and attention to detail. Willingness to work in a regulated pharmaceutical manufacturing environment. Why Join Us Be part of a purpose-driven company delivering life-saving injectable therapies. Gain hands-on experience in a state-of-the-art sterile pharmaceutical facility. Work in a dynamic environment where your contributions directly impact daily operations. Competitive compensation and benefits with opportunities for growth and advancement.

As a Maintenance Technician, you perform, monitor & evaluate preventative maintenance plans, while continually work towards improving equipment & processes. At our company, Associates take pride in maintaining our high standards of quality products and our positive team culture. We're also proud to be recognized as an America's Safest Companies by EHS Today. We Offer Rewards: Receive premium pay for your valued skills! Rewards: Be recognized for your expertise & rewarded for your contribution! Advancement : We prioritize promote-from-within! State-of-the-Art Equipment: Work with our top of the line injection molding equipment from industry leaders, such as Husky, as well as our own proprietary technologies! You Will Perform maintenance for injection molding manufacturing equipment to assure uninterrupted & optimal operations Execute & continuously improve preventative maintenance procedures Participate in changeovers, ensuring efficient & correct execution Repair & rebuilds spare parts Assure compliance with all safety protocols, quality standards, operational practices & procedures Expand your expertise through formal training & on-the-job experiences, including new equipment installation & equipment modification projects You Have Ability to work Monday - Friday, 6:30am - 4:00pm along with overtime, as needed High School Diploma, GED or equivalent A minimum of three (3) years of experience maintaining manufacturing equipment. Experience with Husky, is preferred. Solid hydraulics, pneumatics and electrical knowledge, along with the ability to troubleshoot & problem solve Ability to interpret technical & operational documents, including manuals, blueprints, schematics ability to lift up to 75 pounds and work on aerial platforms up to 20 feet with or without reasonable accommodation As a Plastipak Associate, you receive a benefits package offering the following: Wellness Programs Health Insurance Coverage, including Medical, Dental & Vision EAP, Employee Assistance Program Life Insurance Accidental Death & Dismemberment Insurance Disability Insurance: Short-Term & Long-Term Accidental Insurance Critical Illness Insurance Hospital Indemnity Insurance 401(k) Plan, with Company Matching Contribution & Profit Sharing feature Paid Time Off - 80 hours within 1st year & subsequent increases Paid Company Holidays Dependent Care Flexible Spending Account Caregiving via Care.com Pet Insurance Tuition Assistance Program Sons and Daughters Scholarship Program Travel Assistance Employee Discount Programs *Some benefits are subject to eligibility requirements Plastipak is an Equal Opportunity Employer In order to process your job application, Plastipak collects and stores the personal information that you submit via this website. Please refer to Plastipak's Privacy Policy to understand how Plastipak uses and protects the information that you provide.

*For a quick application text APPLY1 to 82174* *About Dent Wizard* Dent Wizard is the nation's undisputed leader in automotive reconditioning services and vehicle protection products - and our success is the result of the great people who serve our customers. We're stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. *Automotive Paintless Dent Repair (PDR) Technician - No Experience Needed!* Commission-based uncapped earning potential. First year earning potential: $50,000-$75,000 Long-term earning potential: $70,000-$150,000+ Are you hands-on, detail-oriented, and ready to learn a specialized skill that can lead to unlimited earning potential? Do you like working with customers and making things happen? Join our growing team as a *Paintless Dent Repair (PDR) Technician* and start a rewarding career-no experience required! What You'll Do: * Travel to customer locations or work at an assigned site to repair minor dents and dings using on various vehicles using Dent Wizard's proprietary PDR process * Review completed work with customers, walk lots, write work orders, and negotiate approvals * Build strong customer relationships and promote our services What We're Looking For: * Strong communication and customer service skills to interact with clients and build relationships * Self-motivation and the ability to work independently * Toughness and grit to work outdoors in various weather conditions * Manual dexterity for repetitive-motion tasks * Physical stamina to kneel, bend, squat, and lift up to 50 pounds * Valid driver's license and a good driving record What We Offer: * *No experience necessary* - we provide comprehensive, paid training (8 weeks of hands-on and classroom instruction with travel and lodging included) * *Unlimited, uncapped earning potential* - the harder you work and the more you master your craft, the more you can make * *Excellent benefits*, including medical, dental, vision, 401(k), paid vacation, and more * *Outstanding perks*, including a company vehicle, gas card, mobile phone, tools allowance, branded clothing, and more * *Independence to manage your day* - no micromanagement * *Variety of work on many types of vehicles*, from new models to classics * *Supportive team environment* with opportunities to grow your skills * *Career advancement* into higher Tech levels (with more $) or management roles The compensation offered for this position will depend on qualifications, experience, and geographic location. The starting compensation is expected to be: $50,000-$150,000/year We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). For more information on our benefit offerings, please visit our Dealer Tire Family of Companies [Benefits Highlights Booklet]( *EOE Statement: *Dent Wizard is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act*), or any other legally protected status, with respect to employment opportunities. *ADA Disclosure: Any candidate who feels that they may need an accommodation to complete this application, or any portions of same, based on the impact of a disability should contact Dent Wizard's Human Resources Department to discuss your specific needs. Please feel free to contact us at ...@dentwizard.com.

Since 1869 we've connected people through food they love. Our history was created by remarkable people, ideas, and innovations. It serves as inspiration and foundation for our future success. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Michael Angelo's, Pace, Pacific Foods, Prego, Rao's Homemade, Swanson, and V8. In our Snacks division, we have brands like Cape Cod, Goldfish, Kettle Brand, Lance, Late July, Pepperidge Farm, Snack Factory, and Snyder's of Hanover. We foster a culture of belonging where people come first, and diversity is embraced. And we live our values, always, while setting the highest standards for performance. Here, you will make a difference every day. You will be part of a dynamic, collaborative, and competitive team. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us. Job Title: Plant Utilities Tech Pay Rate: $33.99 Reports to (Title): Facilities Specialist Location: Lakeland Position Summary The Utilities Technician is responsible for the safe, efficient, and reliable operation of all plant utility systems, with a strong emphasis on ammonia refrigeration. This includes equipment such as boilers, ammonia refrigeration systems, air compressors, HVAC systems, cooling towers, water treatment systems, and other critical infrastructure that supports manufacturing operations. The Utilities Technician ensures compliance with safety, environmental, and regulatory standards while minimizing downtime and supporting overall plant performance. Key Responsibilities * Operate, monitor, and maintain plant utilities including ammonia refrigeration, steam, compressed air, chilled water, HVAC systems. * Conduct preventive and predictive maintenance on utility equipment to ensure optimal performance and reliability. * Troubleshoot and repair mechanical, electrical, and instrumentation issues related to utility systems, with emphasis on ammonia refrigeration systems. * Perform routine inspections, monitoring, and recording of operating conditions, including pressure, temperature, flow, and chemical levels. * Ensure compliance with OSHA, EPA, PSM (Process Safety Management), RMP (Risk Management Program), and other regulatory requirements related to ammonia and utilities operations. * Respond to equipment alarms, emergencies, and breakdowns to minimize impact on production. * Maintain accurate maintenance and compliance records, logs, and reports. * Collaborate with maintenance, production, and engineering teams to support plant operations and projects. * Participate in continuous improvement initiatives to enhance energy efficiency, refrigeration system reliability, and overall plant performance. * All other duties as assigned. Qualifications * High school diploma or equivalent; technical or trade school certification preferred. * Minimum of 2-4 years' experience in utilities, ammonia refrigeration, or industrial plant operations. * Knowledge of industrial ammonia refrigeration systems (IIAR standards preferred). * Experience with boilers, HVAC, air compressors, and water treatment systems. * Ability to read and interpret technical manuals, schematics, and P&IDs. * Strong troubleshooting and problem-solving skills in mechanical, electrical, and control systems. * Familiarity with CMMS (Computerized Maintenance Management System) preferred. * RETA certification or equivalent ammonia refrigeration training strongly preferred. * Must be able to work independently, prioritize tasks, and manage time effectively. Physical & Work Environment Requirements * Ability to lift up to 50 lbs. and perform physical tasks such as climbing, kneeling, and standing for extended periods. * Must be able to work in warm and cold environments, confined spaces, and at heights as required. * Willingness to work rotating shifts, weekends, and overtime as needed to support 24/7 operations. * Exposure to loud noise, ammonia, moving equipment, and chemicals with proper PPE provided. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.

Industrial Mechanic performs entry maintenance, fabrication, overhaul and repair of mechanical equipment located within a water, wastewater, or reclaimed treatment sewer pump station or LPSS facilities. Assists and/or leads crews in a broad range of preventive maintenance, corrective maintenance, and new equipment installations, and assists with planning and estimating costs of maintenance work. Salary $45,219 - $86,320 Ideal Candidate Will have prior experience in maintenance best practices and procedures that support the duties, responsibilities, and skill sets required of an Industrial Mechanic. This position deals with the maintenance of water, wastewater and reclaimed water equipment such as, but not limited to the following: submersible pumps, dry pit pumps, high head pressure mobile pumps, vertical turbine pumps, split case pumps, progressive cavity pumps, peristaltic pumps, rotary lobe blowers, centrifuges, conveyors, valves, piping, gearboxes, air systems, gas compressors, gas service turbine generators, grit chambers or manual bar screens and chemical systems such as those used in treating H2S gases, water treatment, and wastewater treatment within Water Resources Department systems and Plant Facilities. This candidate will be able to troubleshoot and repair any of the above listed equipment as well as perform predictive and preventative maintenance utilizing the following tools and technologies; perform alignments on pumps and motors, utilize laser alignment equipment on blowers and motors; be able to perform vibration and ultrasound testing on motors, gearboxes, pumps, and blowers with provided vibration and ultrasound tools. Candidate should possess advanced knowledge of preventative maintenance practices, procedures, and techniques for lubrication and greasing of all the above equipment. Candidates should have some background in Stick, TIG, or MIG welding and PVC, CPVC, and flanged piping repairs. Candidates will be willing to work overtime as needed and must understand that participation in a 24/7 after-hours standby rotation program is required after successful completion of probation. Candidates should possess basic computer skills with standard software such as Excel, Word, Outlook, etc., and knowledge of a computer-operated work management system. Some positions may require possession of a CDL driver's license and/or a collection license. Core Competencies Customer Commitment - Proactively seeks to understand the needs of the customers and provide the highest standards of service. Dedication to Professionalism and Integrity - Demonstrates and promotes fair, honest, professional and ethical behaviors that establishes trust throughout the organization and with the public we serve. Organizational Excellence - Takes ownership for excellence through one's personal effectiveness and dedication to the continuous improvement of our operations. Success through Teamwork - Collaborates and builds partnerships through trust and the open exchange of diverse ideas and perspectives to achieve organizational goals. Tier 1Tier 2 Duties and Responsibilities Note: The following duties are illustrative and not exhaustive. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. Depending on assigned area of responsibility, incumbents in the position may perform one or more of the activities described below: Reviews system designs, specifications, and products, attends pre-construction meetings, and recommends changes in water/wastewater/reclaim facilities mechanical systems. Monitors, reviews and validates work practices for quality control assurance of wastewater processes and to ensure adherence to safety standards in operation of water/wastewater/reclaim water facilities. Trouble-shoots problems and recommends corrective actions based on skilled knowledge of mechanical repair practices. Inputs and gathers data from Supervisory Control Data Acquisition system (SCADA), and Comprehensive Asset Management System (CAMS). Runs reports as necessary. Performs preventative maintenance and corrective repair work on water/wastewater/reclaim facilities and equipment. Fabricates and machines repair parts for equipment, with the ability to weld steel, brass, and aluminum. Operates lathes, mill/drill presses, welder and various other metal working power tools as needed. May direct and/or oversee the work of other employees, provide instruction, guidance, and training as required. Locates leaks, and detects defects in water/wastewater/reclaim equipment in conformance to established plans and standards. Expected to temporarily perform duties outside normal classification in the event of a declared emergency. Operates a personal computer and work in software programs associated with job. Completes various maintenance jobs on buildings and grounds. Performs other related duties as required. Duties and Responsibilities Note: The following duties are illustrative and not exhaustive. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. Depending on assigned area of responsibility, incumbents in the position may perform one or more of the activities described below: Reviews system designs, specifications, and products, attends pre-construction meetings, and recommends changes in water/wastewater/reclaim facilities mechanical systems. Monitors, reviews and validates work practices for quality control assurance of wastewater processes and to ensure adherence to safety standards in operation of water/wastewater/reclaim water facilities. Trouble-shoots problems and recommends corrective actions based on skilled knowledge of mechanical repair practices. Inputs and gathers data from Supervisory Control Data Acquisition system (SCADA), and Comprehensive Asset Management System (CAMS). Runs reports as necessary. Performs preventative maintenance and corrective repair work on water/wastewater/reclaim facilities and equipment. Fabricates and machines repair parts for equipment, with the ability to weld steel, brass, and aluminum. Operates lathes, mill/drill presses, welder and various other metal working power tools as needed. Direct and/or oversee the work of other subordinate employees, provide instruction, guidance, and training as required. Locates leaks, and detects defects in water/wastewater/reclaim equipment in conformance to established plans and standards. Expected to temporarily perform duties outside normal classification in the event of a declared emergency. Operates a personal computer and work in software programs associated with job. Completes various maintenance jobs on buildings and grounds. Performs other related duties as required. Job Specifications Knowledge of the maintenance and repair of machinery and related mechanical equipment. Knowledge of the water, reclaim, wastewater treatment systems and sewer pump/lift stations and low pressure sewer systems. Knowledge of the operation and maintenance of the water/wastewater/reclaim facilities operating equipment. Knowledge of the principals of hydraulics, electricity, combustion, and standard safety practices. Knowledge on the principles and practices of odor control and/or disinfection processes. Ability to troubleshoot and diagnose equipment problems to determine the proper remedial action to be taken, and to make the necessary repairs to equipment. Ability to understand and follow oral and written instructions. Ability to read piping and electrical diagrams, schematics, and blueprints. Ability to establish and maintain effective working relationships with others. Ability to pass medical testing and to wear various types of respiratory protection deemed necessary for the environment being worked in for the protection of the employee. The types of respiratory protection devices used are (but not limited to) Half Facepiece, Full Facepiece, Filtering Facepiece, Powered Air-Purifying (PAPRs), Supplied-Air, Self-Contained Breathing Apparatus (SCBAs), or Combination Type. Ability to perform predictive, preventive, and corrective maintenance on assigned equipment and machinery. Ability to estimate time, materials, and equipment required for assigned jobs; may requisition materials as required and/or instructed. Ability and willingness to respond to emergency situations such as floods, hurricanes, tornadoes and other natural and/or unnatural crises to provide for public health and safety. Ability and willingness to work overtime, rotating shifts, including nights, weekends and holidays. Ability to use a computer and related software. Ability to operate a fork lift, backhoe, boom/bucket truck or other heavy equipment. Ability to work effectively with others. Job Specifications Knowledge of the maintenance and repair of machinery and related mechanical equipment. Knowledge of the water, reclaim, wastewater treatment systems and sewer pump/lift stations and low pressure sewer systems. Knowledge of the operation and maintenance of the water/wastewater/reclaim facilities operating equipment. Knowledge of the principals of hydraulics, electricity, combustion, and standard safety practices. Knowledge on the principles and practices of odor control and/or disinfection processes. Ability to troubleshoot and diagnose equipment problems to determine the proper remedial action to be taken, and to make the necessary repairs to equipment. Ability to understand and follow oral and written instructions. Ability to read piping and electrical diagrams, schematics, and blueprints. Ability to establish and maintain effective working relationships with others. Ability to pass medical testing and to wear various types of respiratory protection deemed necessary for the environment being worked in for the protection of the employee. The types of respiratory protection devices used are (but not limited to) Half Facepiece, Full Facepiece, Filtering Facepiece, Powered Air-Purifying (PAPRs), Supplied-Air, Self-Contained Breathing Apparatus (SCBAs), or Combination Type. Ability to perform predictive, preventive, and corrective maintenance on assigned equipment and machinery. Ability to estimate time, materials, and equipment required for assigned jobs; may requisition materials as required and/or instructed. Ability and willingness to respond to emergency situations such as floods, hurricanes, tornadoes and other natural and/or unnatural crises to provide for public health and safety. Ability and willingness to work overtime, rotating shifts, including nights, weekends and holidays. Ability to use a computer and related software. Ability to operate a fork lift, backhoe, boom/bucket truck or other heavy equipment. Ability to work effectively with others. Ability to serve as the lead employee as directed on project teams assigned to a given assignment. Physical Requirements May require shift work which will include working nights, weekends, and holidays as well as working extended hours during times of emergency. Employee is expected to be able to work in and around confined spaces such as wet wells, vaults, manholes, trench boxes, tanks, and in areas of height using ladders, man-lifts of any kind, on top of buildings or tanks/structures wearing a harness and protective safety gear and/or in environments where toxic or chemical fumes not natural to the atmosphere exist while wearing protective respiratory equipment, as necessary. Work Category Medium Work - Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Physical Requirements May require shift work which will include working nights, weekends, and holidays as well as working extended hours during times of emergency. Employee is expected to be able to work in and around confined spaces such as wet wells, vaults, manholes, trench boxes, tanks, and in areas of height using ladders, man-lifts of any kind, on top of buildings or tanks/structures wearing a harness and protective safety gear and/or in environments where toxic or chemical fumes not natural to the atmosphere exist while wearing protective respiratory equipment, as necessary. Work Category Medium Work - Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Minimum Qualifications Required Graduation from high school or possession of a GED Certificate; AND Four (4) years of experience in mechanical maintenance and repair/replacement of water and wastewater related equipment; OR An equivalent combination of education, training and experience that would reasonably be expected to provide the job-specific competencies noted above; AND Possession of a valid Florida Driver's License. NOTE: Some of positions in this job classification may require: Possession a valid Class B Commercial Driver's License with tanker endorsement will be required for positions associated with LPPS and Pump Stations. Possession of, or ability to obtain and maintain an appropriate level Florida wastewater collections license. A passing score on a math and technical comprehension test. Minimum Qualifications Required Graduation from high school or possession of a GED Certificate; AND Six (6) years of experience in mechanical maintenance and repair/replacement of water and waste water related equipment; AND Possession of a valid Certified Maintenance and Reliability Technician (CMRT); OR An equivalent combination of education, training and experience that would reasonably be expected to provide the job-specific competencies noted above; AND Possession of a valid Florida Driver's License. NOTE: Some of positions in this job classification may require: Possession a valid Class B Commercial Driver's License with tanker endorsement will be required for positions associated with LPPS and Pump Stations. Possession of, or ability to obtain and maintain an appropriate level Florida wastewater collections license. A passing score on a math and technical comprehension test. Emergency Management Responsibilities In the event of an emergency or disaster, an employee may be required to respond promptly to duties and responsibilities as assigned by the employee's department, the County's Office of Emergency Management, or County Administration. Such assignments may be for before, during or after the emergency/disaster.

Industrial Mechanic performs entry maintenance, fabrication, overhaul and repair of mechanical equipment located within a water, wastewater, or reclaimed treatment sewer pump station or LPSS facilities. Assists and/or leads crews in a broad range of preventive maintenance, corrective maintenance, and new equipment installations, and assists with planning and estimating costs of maintenance work. Salary $45,219 - $86,320 Ideal Candidate The ideal candidate will have prior experience in maintenance best practices and procedures that support the duties, responsibilities and skill sets required of an Industrial Mechanic. This position deals with maintenance of lift stations, water, wastewater, and reclaimed water treatment equipment such as, but not limited to the following: pumps (centrifugal, split case, submersible, positive displacement, diaphragm, vertical turbine) valves, piping, gearboxes, air systems, gas compressors, gas service turbine generator, grit chambers and chemical systems (sodium hypochlorite, Hydrofluorosilicic acid, Aqueous ammonia, Sodium aluminate, and Sodium hydroxide caustic soda). This candidate will be able to troubleshoot and repair any of the above listed equipment as well as perform predictive and preventative maintenance utilizing the following tools and technologies; perform alignments on pumps and motors, utilize laser alignment equipment on blowers and motors; be able to perform vibration and ultrasound testing on motors, gearboxes, pumps, and blowers with provided vibration and ultrasound tools. Candidate should possess advanced knowledge of preventative maintenance practices, procedures and technics for lubrication and greasing of all above equipment. Candidates should have some background in Stick, TIG or MIG welding and PVC, CPVC, and flanged piping repairs. Candidates will be willing to work overtime as needed, must understand that participation in a 24/7 afterhours standby rotation program is required after successful completion of probation. Candidates should possess basic computer skills with standard software such as Excel, Word, Outlook, etc. and knowledge of a computer operated work management system. Some positions may require possession of a CDL driver's license and/or a collection license. Core Competencies Customer Commitment - Proactively seeks to understand the needs of the customers and provide the highest standards of service. Dedication to Professionalism and Integrity - Demonstrates and promotes fair, honest, professional and ethical behaviors that establishes trust throughout the organization and with the public we serve. Organizational Excellence - Takes ownership for excellence through one's personal effectiveness and dedication to the continuous improvement of our operations. Success through Teamwork - Collaborates and builds partnerships through trust and the open exchange of diverse ideas and perspectives to achieve organizational goals. Tier 1Tier 2 Duties and Responsibilities Note: The following duties are illustrative and not exhaustive. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. Depending on assigned area of responsibility, incumbents in the position may perform one or more of the activities described below: Reviews system designs, specifications, and products, attends pre-construction meetings, and recommends changes in water/wastewater/reclaim facilities mechanical systems. Monitors, reviews and validates work practices for quality control assurance of wastewater processes and to ensure adherence to safety standards in operation of water/wastewater/reclaim water facilities. Trouble-shoots problems and recommends corrective actions based on skilled knowledge of mechanical repair practices. Inputs and gathers data from Supervisory Control Data Acquisition system (SCADA), and Comprehensive Asset Management System (CAMS). Runs reports as necessary. Performs preventative maintenance and corrective repair work on water/wastewater/reclaim facilities and equipment. Fabricates and machines repair parts for equipment, with the ability to weld steel, brass, and aluminum. Operates lathes, mill/drill presses, welder and various other metal working power tools as needed. May direct and/or oversee the work of other employees, provide instruction, guidance, and training as required. Locates leaks, and detects defects in water/wastewater/reclaim equipment in conformance to established plans and standards. Expected to temporarily perform duties outside normal classification in the event of a declared emergency. Operates a personal computer and work in software programs associated with job. Completes various maintenance jobs on buildings and grounds. Performs other related duties as required. Duties and Responsibilities Note: The following duties are illustrative and not exhaustive. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. Depending on assigned area of responsibility, incumbents in the position may perform one or more of the activities described below: Reviews system designs, specifications, and products, attends pre-construction meetings, and recommends changes in water/wastewater/reclaim facilities mechanical systems. Monitors, reviews and validates work practices for quality control assurance of wastewater processes and to ensure adherence to safety standards in operation of water/wastewater/reclaim water facilities. Trouble-shoots problems and recommends corrective actions based on skilled knowledge of mechanical repair practices. Inputs and gathers data from Supervisory Control Data Acquisition system (SCADA), and Comprehensive Asset Management System (CAMS). Runs reports as necessary. Performs preventative maintenance and corrective repair work on water/wastewater/reclaim facilities and equipment. Fabricates and machines repair parts for equipment, with the ability to weld steel, brass, and aluminum. Operates lathes, mill/drill presses, welder and various other metal working power tools as needed. Direct and/or oversee the work of other subordinate employees, provide instruction, guidance, and training as required. Locates leaks, and detects defects in water/wastewater/reclaim equipment in conformance to established plans and standards. Expected to temporarily perform duties outside normal classification in the event of a declared emergency. Operates a personal computer and work in software programs associated with job. Completes various maintenance jobs on buildings and grounds. Performs other related duties as required. Job Specifications Knowledge of the maintenance and repair of machinery and related mechanical equipment. Knowledge of the water, reclaim, wastewater treatment systems and sewer pump/lift stations and low pressure sewer systems. Knowledge of the operation and maintenance of the water/wastewater/reclaim facilities operating equipment. Knowledge of the principals of hydraulics, electricity, combustion, and standard safety practices. Knowledge on the principles and practices of odor control and/or disinfection processes. Ability to troubleshoot and diagnose equipment problems to determine the proper remedial action to be taken, and to make the necessary repairs to equipment. Ability to understand and follow oral and written instructions. Ability to read piping and electrical diagrams, schematics, and blueprints. Ability to establish and maintain effective working relationships with others. Ability to pass medical testing and to wear various types of respiratory protection deemed necessary for the environment being worked in for the protection of the employee. The types of respiratory protection devices used are (but not limited to) Half Facepiece, Full Facepiece, Filtering Facepiece, Powered Air-Purifying (PAPRs), Supplied-Air, Self-Contained Breathing Apparatus (SCBAs), or Combination Type. Ability to perform predictive, preventive, and corrective maintenance on assigned equipment and machinery. Ability to estimate time, materials, and equipment required for assigned jobs; may requisition materials as required and/or instructed. Ability and willingness to respond to emergency situations such as floods, hurricanes, tornadoes and other natural and/or unnatural crises to provide for public health and safety. Ability and willingness to work overtime, rotating shifts, including nights, weekends and holidays. Ability to use a computer and related software. Ability to operate a fork lift, backhoe, boom/bucket truck or other heavy equipment. Ability to work effectively with others. Job Specifications Knowledge of the maintenance and repair of machinery and related mechanical equipment. Knowledge of the water, reclaim, wastewater treatment systems and sewer pump/lift stations and low pressure sewer systems. Knowledge of the operation and maintenance of the water/wastewater/reclaim facilities operating equipment. Knowledge of the principals of hydraulics, electricity, combustion, and standard safety practices. Knowledge on the principles and practices of odor control and/or disinfection processes. Ability to troubleshoot and diagnose equipment problems to determine the proper remedial action to be taken, and to make the necessary repairs to equipment. Ability to understand and follow oral and written instructions. Ability to read piping and electrical diagrams, schematics, and blueprints. Ability to establish and maintain effective working relationships with others. Ability to pass medical testing and to wear various types of respiratory protection deemed necessary for the environment being worked in for the protection of the employee. The types of respiratory protection devices used are (but not limited to) Half Facepiece, Full Facepiece, Filtering Facepiece, Powered Air-Purifying (PAPRs), Supplied-Air, Self-Contained Breathing Apparatus (SCBAs), or Combination Type. Ability to perform predictive, preventive, and corrective maintenance on assigned equipment and machinery. Ability to estimate time, materials, and equipment required for assigned jobs; may requisition materials as required and/or instructed. Ability and willingness to respond to emergency situations such as floods, hurricanes, tornadoes and other natural and/or unnatural crises to provide for public health and safety. Ability and willingness to work overtime, rotating shifts, including nights, weekends and holidays. Ability to use a computer and related software. Ability to operate a fork lift, backhoe, boom/bucket truck or other heavy equipment. Ability to work effectively with others. Ability to serve as the lead employee as directed on project teams assigned to a given assignment. Physical Requirements May require shift work which will include working nights, weekends, and holidays as well as working extended hours during times of emergency. Employee is expected to be able to work in and around confined spaces such as wet wells, vaults, manholes, trench boxes, tanks, and in areas of height using ladders, man-lifts of any kind, on top of buildings or tanks/structures wearing a harness and protective safety gear and/or in environments where toxic or chemical fumes not natural to the atmosphere exist while wearing protective respiratory equipment, as necessary. Work Category Medium Work - Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Physical Requirements May require shift work which will include working nights, weekends, and holidays as well as working extended hours during times of emergency. Employee is expected to be able to work in and around confined spaces such as wet wells, vaults, manholes, trench boxes, tanks, and in areas of height using ladders, man-lifts of any kind, on top of buildings or tanks/structures wearing a harness and protective safety gear and/or in environments where toxic or chemical fumes not natural to the atmosphere exist while wearing protective respiratory equipment, as necessary. Work Category Medium Work - Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Minimum Qualifications Required Graduation from high school or possession of a GED Certificate; AND Four (4) years of experience in mechanical maintenance and repair/replacement of water and wastewater related equipment; OR An equivalent combination of education, training and experience that would reasonably be expected to provide the job-specific competencies noted above; AND Possession of a valid Florida Driver's License. NOTE: Some of positions in this job classification may require: Possession a valid Class B Commercial Driver's License with tanker endorsement will be required for positions associated with LPPS and Pump Stations. Possession of, or ability to obtain and maintain an appropriate level Florida wastewater collections license. A passing score on a math and technical comprehension test. Minimum Qualifications Required Graduation from high school or possession of a GED Certificate; AND Six (6) years of experience in mechanical maintenance and repair/replacement of water and waste water related equipment; AND Possession of a valid Certified Maintenance and Reliability Technician (CMRT); OR An equivalent combination of education, training and experience that would reasonably be expected to provide the job-specific competencies noted above; AND Possession of a valid Florida Driver's License. NOTE: Some of positions in this job classification may require: Possession a valid Class B Commercial Driver's License with tanker endorsement will be required for positions associated with LPPS and Pump Stations. Possession of, or ability to obtain and maintain an appropriate level Florida wastewater collections license. A passing score on a math and technical comprehension test. Emergency Management Responsibilities In the event of an emergency or disaster, an employee may be required to respond promptly to duties and responsibilities as assigned by the employee's department, the County's Office of Emergency Management, or County Administration. Such assignments may be for before, during or after the emergency/disaster.

Looking to be at the cutting edge of healthcare and pharmacy? If so TelyRx is for you. We are seeking a highly motivated registered pharmacy technician to join our team. We are a state-of-the-art technology enabled telehealth pharmacy located in Clearwater, Florida. About Us: We believe access to essential medicines should be simple, convenient, and readily available. TelyRx was launched to help people get their everyday medications they need by removing unnecessary barriers and streamlining the process. Our approach is straightforward: no insurance, no hassle, and no need to jump through hoops. Our vision is to revolutionize the way people receive healthcare by providing a seamless and personalized experience for all. By using cutting-edge technology and a patient-centered approach, TelyRx is committed to ensuring everyone has hassle-free access to their needed medications. This is accomplished in a market-leading, minimalistic approach that eliminates wasted time and effort for the patient, providers, and pharmacists. In addition to streamlining the process through our website functionality, we utilize state-of-the-art automation to help fill the orders safely. We believe that healthcare should be inclusive and convenient, and our dedicated team is working tirelessly to make this vision a reality. Our culture is very family oriented, we foster a sense of community here at TelyRx. We strive to make a difference by connecting with our patients and each other through shared values and creativity. Join us on this journey toward a healthier, more accessible future with TelyRx. Responsibilities: ? Respond to phone calls from patients in a professional and patient manner ? Respond to emails from patients in a professional and patient manner ? Remain agile for performing workflow tasks such as data entry, filling, inventory and shipping ? Under the direct supervision of a pharmacist dispense and package medications accurately and efficiently ? Assist in maintaining Inventory and appropriate labeling of medications ? Patient follow up via phone calls both inbound and outbound and voicemails ? Process refill requests and cancellations ? Assist with shipping and handling when needed ? Data entry/attentiveness with order quantities and look alike sound alike medications Qualifications: ? The ideal candidate must have an active registered pharm tech license in the state of Florida. ? Able to commit to Monday through Friday, and weekend shifts as needed ? Excellent customer service and verbal skills and problem-resolution ? Excellent written communication skills ? Be agile, flexible, and willing to learn as we grow and evolve ? Must be able to be onsite at our Clearwater pharmacy for hours worked ? Proficient in Microsoft apps and/or Google apps ? A collaborative get it done approach to exceed our patients' expectations ? Highschool diploma or general education degree (GED) ? At Least one-year related experience and/or training or equivalent combination of education and experience. ? Reliable transportation ? Ability to be a team player Job Type: Full-time Pay: $20.00 per hour Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Physical Setting: Telehealth Schedule: Monday to Friday Weekends as needed Ability to Relocate: Clearwater, FL: Relocate before starting work (Required) Work Location: In person PI1f4837a75b25-31181-36043313

Job Description We are seeking a skilled and dependable Facility Maintenance Handyman to join our team! This position offers the opportunity to travel and work on a variety of maintenance and repair projects across different locations. As a Traveling Handyman, you'll be responsible for delivering top-quality service and ensuring the maintenance of client facilities. This is an hourly position with the flexibility to work both independently and as part of a team. Additional Benefits: Competitive pay Paid vacation Health benefits 401(k) matching Referral bonuses If you're motivated, enjoy problem-solving, and are ready for a dynamic role, apply today! Compensation: $20 - $24 hourly Responsibilities: Communicate clearly and effectively with both clients and team members, responding to tasks and requests in a timely manner. Adhere to company policies and provide excellent customer service in all interactions. Complete maintenance tasks before moving on to the next project or provide temporary solutions when necessary. Work independently or collaborate with a crew, based on the job requirements. Represent the company professionally in the field with a clean and presentable uniform and appearance. Qualifications: Must be reliable, punctual, and have a strong commitment to completing tasks with the highest quality standards. Strong communication skills, both written and verbal, in English. Spanish is a plus but not required. Strong experience in concrete work, including finishing and repairs. Must be available for on-call duties after hours, including nights, weekends, and holidays, to respond to emergency situations. Preferred experience with a range of commercial repairs, such as plumbing, electrical, drywall, ceiling tiles/grids, floor tiles, and painting. About Company Founded in 2007, Walker Property Services, LLC is a highly specialized company in providing facility maintenance and self-performing projects to multiple Fortune 500 customers across the nation. We are confident in our ability to deliver exceptional service for your retail and commercial property needs.

Job Description Bern's Steak House is looking for new members for our maintenance team who have basic tool knowledge to help work in our maintenance shop and restaurants. Work is done on site at several facilities requiring basic maintenance responsibilities. Responsibilities and Duties 1st shift and some weekends and various on call hours Maintain a clean and safe work environment Miscellaneous duties covering mechanical, electrical, plumbing, construction/woodworking Run and repair high volume equipment such as HVAC and refrigeration systems Work well with a small team Preventative Maintenance Routine cleaning Must be able to work in a high stress/ fast paced environment *** Will train in certain areas Qualifications and Skills Basic maintenance experience needed. Follow sanitation policies and cleanliness Must work well with others and communicate Must work quickly in a safe and effective manner Need to have consideration for other employees and maintain a professional demeanor Ability to multitask in a high-volume restaurant setting Attention to detail Ability to work in a diverse environment Benefits and Perks Immediate Closed Every Monday Closed Holidays Gasparilla Invasion Memorial Day Labor Day Christmas Day Holiday Bonus Shift Pay for Thanksgiving Day and Christmas Eve Custom Supplemental Insurance Coverages Through AFLAC Life Insurance Policy (10-, 20-, & 30-year terms) Short Term Disability Income Insurance Accident Advantage On/Off Job Insurance Cancer Protection Insurance Critical Care Protection Insurance Hospital Choice Insurance Bereavement Pay for Loss of Immediate Family, Extended Family, and Pets Family First Discounts 20% off entire bill at Haven restaurant & bar for employee and up to 3 guests 20% off food and non-alcoholic drinks at Bern's Steak House for employee and up to 3 guests 20% off food and non-alcoholic drinks at the Harry Waugh Dessert Room for employee and up to 3 guests 10% off total purchase at Bern's Fine Wines & Spirits retail store 20% off entire bill for all meal periods at Élevage SOHO Kitchen & Bar for employee 20% off Spa Services at Spa Evangeline for employee 20% off Epicurean Theatre classes per online purchase Marriott Friends and Family Discount for hotel accommodations Complimentary Family Meal and/or $3 Discounted Meal per shift Free, Secure, Covered Parking 90-Days Custom Packaging Health Plan Options with Tenured Based Employer Contribution Health Dental Vision Internal Career Growth Opportunities 1-Year Tenured Anniversary Pay for maintaining full-time status (5 days up to 20 days paid annually) 401K Employer Match of 25% Up to the First 6% 100% Education Reimbursement Program for Approved Courses and Certifications with Supplemental Reimbursement for Travel and Materials The Company values a diverse workforce with all the unique qualities that individuals of various backgrounds and experiences offer our organization. We are committed to providing opportunities and developing employees to their fullest potential without regard to race, color, gender, age, religion, national origin, marital status, military status, disability, sexual orientation or any other status protected by law. Powered by JazzHR HJz4AAWj3m

QUALIFICATIONS: Solid working knowledge of electrical systems, including 120V, 208/240V, and 480V 3-phase power. Ability to read and troubleshoot using wiring schematics. Must be able to troubleshoot and repair machinery or mechanical equipment and make sound decisions on how to repair. Ensure that all safety procedures are followed during maintenance and repair activities. Experience with HMIs, VFDs, Vision Systems, Welding, and Press Brake equipment strongly preferred. Strong understanding of pneumatic and hydraulic systems, with proven troubleshooting and repair ability. Welding equipment and bridge crane maintenance experience are a plus. Familiarity with CMMS or other preventive maintenance programs preferred. Self-motivated, detail-oriented, and able to work independently or in a team environment. DESCRIPTION: Perform preventive maintenance on motors, pneumatic and hydraulic systems, and related sub-systems. Troubleshoot and repair electrical, mechanical, and control system issues using test instruments and diagnostic tools. Remove and replace defective parts using appropriate tools, hoists, or cranes. Adjust, calibrate, and maintain control instruments and mechanical components for optimal performance. Minimize downtime through proactive maintenance and clear communication with production teams. Provide technical support and collaborate with production supervisors to schedule maintenance activities. Maintain a clean, organized, and safe work environment in accordance with company safety standards. 1st Shift 7:00 am - 3:30 pm

Shipyard Valve Technician Gulf Marine Repair of Tampa, FL is looking to hire full-time Valve Technicians. As a Valve Technician, you are responsible for the maintenance, assessment, repairing, and testing of various types of industrial valves. You work closely with the Pipe department and follow all schematics and documented procedures in accordance with all Quality Control standards. You tear down, clean, inspect, measure, and reassemble various valves including ball valves, gate valves, butterfly valves, and safety relief valves, etc. You get great satisfaction out of doing your part to ensure that marine vessels operate smoothly and safely! QUALIFICATIONS FOR A VALVE TECHNICIAN * 2 - 5 years valve repair experience * Must have own tools * Must be familiar with tools and machinery required to perform daily valve repair duties * Experience with repairing various valves and actuators, whether pneumatic, hydraulic, or electric. * Ability to pass a drug test/drug-free workplace * Shipyard experience preferred Shipyard experience is preferred but multiple factors will be taken into consideration. Do you have a willingness to learn? Are you self-motivated and reliable? Can you work well independently? Do you take pride in doing quality work? If so, you might just be perfect for this important shipyard job! WORK SCHEDULE This full-time machining position works 40+ hours per week. The 1st shift runs from 7:30 AM to 4:00 PM. The 2nd Shift runs from 4:30 PM - 1:00 AM Weekends are required when needed. READY TO JOIN OUR TEAM? We understand your time is valuable and that is why we have a very quick and easy application process. If you feel that you would be right for this machining job in the shipyard industry, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Gulf Marine Repair is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment for all applicants and employees, and we consider all qualified individuals without regard to legally protected characteristics. Location: 33605

Since 1869, we've connected people through food they love. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Cape Cod, Chunky, Goldfish, Kettle Brand, Lance, Late July, Pacific Foods, Pepperidge Farm, Prego, Pace, Rao's Homemade, Snack Factory, Snyder's of Hanover. Swanson, and V8. Here, you will make a difference every day. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us. Job Title: Plant Utilities Tech Pay Rate: $33.99 Reports to (Title): Facilities Specialist Location: Lakeland Position Summary The Utilities Technician is responsible for the safe, efficient, and reliable operation of all plant utility systems, with a strong emphasis on ammonia refrigeration. This includes equipment such as boilers, ammonia refrigeration systems, air compressors, HVAC systems, cooling towers, water treatment systems, and other critical infrastructure that supports manufacturing operations. The Utilities Technician ensures compliance with safety, environmental, and regulatory standards while minimizing downtime and supporting overall plant performance. Key Responsibilities * Operate, monitor, and maintain plant utilities including ammonia refrigeration, steam, compressed air, chilled water, HVAC systems. * Conduct preventive and predictive maintenance on utility equipment to ensure optimal performance and reliability. * Troubleshoot and repair mechanical, electrical, and instrumentation issues related to utility systems, with emphasis on ammonia refrigeration systems. * Perform routine inspections, monitoring, and recording of operating conditions, including pressure, temperature, flow, and chemical levels. * Ensure compliance with OSHA, EPA, PSM (Process Safety Management), RMP (Risk Management Program), and other regulatory requirements related to ammonia and utilities operations. * Respond to equipment alarms, emergencies, and breakdowns to minimize impact on production. * Maintain accurate maintenance and compliance records, logs, and reports. * Collaborate with maintenance, production, and engineering teams to support plant operations and projects. * Participate in continuous improvement initiatives to enhance energy efficiency, refrigeration system reliability, and overall plant performance. * All other duties as assigned. Qualifications * High school diploma or equivalent; technical or trade school certification preferred. * Minimum of 2-4 years' experience in utilities, ammonia refrigeration, or industrial plant operations. * Knowledge of industrial ammonia refrigeration systems (IIAR standards preferred). * Experience with boilers, HVAC, air compressors, and water treatment systems. * Ability to read and interpret technical manuals, schematics, and P&IDs. * Strong troubleshooting and problem-solving skills in mechanical, electrical, and control systems. * Familiarity with CMMS (Computerized Maintenance Management System) preferred. * RETA certification or equivalent ammonia refrigeration training strongly preferred. * Must be able to work independently, prioritize tasks, and manage time effectively. Physical & Work Environment Requirements * Ability to lift up to 50 lbs. and perform physical tasks such as climbing, kneeling, and standing for extended periods. * Must be able to work in warm and cold environments, confined spaces, and at heights as required. * Willingness to work rotating shifts, weekends, and overtime as needed to support 24/7 operations. * Exposure to loud noise, ammonia, moving equipment, and chemicals with proper PPE provided. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.

At Highwoods, our focus is on providing exceptional experiences for everyone involved - our customers, employees, stakeholders, and our local communities. We believe in enhancing the customer experience within our buildings by integrating hospitality and top-notch amenities, creating a truly unmatched work environment. A Day in the Life As a Highwoods Maintenance Utility Technician, you will be part of a team that strives to provide best-in-class service to customers in our full-service commercial office buildings in the Tampa Market. We're seeking someone passionate about providing exceptional service, and fostering a sense of community for our diverse customer base within the portfolio. Work Performed: Work closely with the Sr. Maintenance Technician who will coordinate maintenance tasks for the facility, under the direction of the Property/Facility Manager Become proficient with the on-line service request system including handheld application Responsible for the overall maintenance of client property and equipment Perform touch-up painting as directed Perform minor janitorial and clean-up duties as requested Assist the Sr. Maintenance Technician and/or Maintenance Technician with any building related mechanical maintenance issues when required Investigate and monitor repeat customer-related calls and report them to the Property/Facility Manager Perform minor leak repairs to roof, window, and fountains Assist contractors with life safety alarm systems and water-based or dry fire protection systems shutdowns and testing Install and repair ceiling tiles, wall coverings, vinyl tile, carpet, cove base, window blinds, signage, etc. Be responsible for accurate and timely record keeping and reporting Assist in hurricane preparedness and response Foster a positive and productive working relationship with client to ensure the best customer service experience and overall customer satisfaction Perform miscellaneous facility-related duties as directed by Property/Facility Manager Job Requirements: Be available for emergency calls at night, weekends, and holidays on a rotating schedule, and Black Sky events at Client's request. Fundamental knowledge of state and local building codes Maintain a current Driver's License Education: High School diploma or equivalent required. Experience: One or more years of janitorial/facility maintenance of commercial real estate preferred. Work Environment/Physical Demands: While performing the duties of this job, the employee may be exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme outdoor conditions (cold / hot weather, wind, precipitation). The noise level in the work environment and job sites can be loud. Must be comfortable working on the roofs of office buildings and climbing ladders. Physical Demands The physical demands described here are representative of those required by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear; this position is active and requires the employee to stand, walk, balance, bend, kneel, stoop, crouch, crawl, and climb. The employee must use hands to handle or feel; grasp and reach with hands and arms - must be able to work frequently with arms extended above head. The employee must occasionally lift, push or pull up to 50-pound items. Specific visual acuity required by this job includes close, distance, color, and peripheral vision, and depth perception. Ability to read, understand, and to communicate information and ideas clearly in writing and orally required.

Benefits Start Day 1 for Full-Time Colleagues - No Waiting Period! For more information about our benefits, see below! We are proud to be a member of the Rentokil family of companies, the global leader in Pest Control and other services across more than 90 countries. We pride ourselves on being a trusted partner to many of the world's leading brands and serve consumer and business customers across multiple industries. We are extremely proud of our legacy of excellence and constantly work to fulfill our mission to "protect people, enhance lives, and preserve the planet." What do our Innovation/Utility specialists do? The primary purpose of this role is to perform the dynamic combined aspects of pest control, exclusion services, minor construction, and TAP (Thermal Acoustical Pest) insulation installation allowing you to make a significant impact in the communities we serve. Responsibilities include but are not limited to the following: * Pest Control: Conduct inspections to identify pest activity, perform pest control services for residential and commercial clients, and install and maintain termite control systems * TAP Insulation Installation: Efficiently install Thermal Acoustical Pest Control (TAP) insulation, ensuring quality service and customer satisfaction while managing job-site preparations and clean-up * Construction and Repair: Assist with light construction projects, including minor repairs and replacements related to pest damage * Customer Interaction: Communicate effectively with customers to explain services, ensure satisfaction, and provide guidance on pest control measures * Service Delivery: Perform exclusion services and wildlife removal, setting up and building exclusion traps, and ensuring safety protocols are followed * Continuous Learning: Stay updated on industry trends, technologies, and regulations. Participate in training to enhance your skills in pest control and related services Essential Job Functions: * Working around animals, insects and termites * Working in tight, confined spaces such as basements, attics, crawl spaces, narrow aisles, or passageways * Setting up and building exclusion traps, cuts flashing and forms hardware cloth to specifications * Removing animals trapped in exclusion devices * Working in a safety harness from roof tops as needed in the performance of exclusion services and wildlife removal * Completing production forms documenting services provided * You'll sometimes be working around mechanical parts, vehicles, electrical current, heights and scaffolding, fumes, dust, and chemicals, and we'll train you how to handle all of these conditions safely * Move up to 50 pounds by lifting, carrying, pushing, pulling, or otherwise repositioning objects * Maintain balance when walking, standing, or crouching on narrow, slippery, or erratically moving surfaces * Push objects forward, downward, or outward with sustained force using the upper extremities to press with steady force and drag, draw, haul, or tug objects * Able to work both inside and outside in your local climate in company-provided weather * Lots of moving around - regularly sitting, climbing, balancing, stooping, kneeling, crouching, and crawling, up and down stairs, ladders, scaffolding, ramps, and poles * Ability to wear personal protective equipment (PPE), like an OSHA-compliant respirator * Safely operate a motor vehicle and make sure it and all other equipment is kept clean What do you need? * Clean shaven face- for safety reasons (rebreathers have to be able to seal your face) * High school diploma or GED; related experience and/or training; or equivalent combination of education and experience. * Possess a valid driver's license from state of residence * Available to work Monday-Friday and Saturdays as needed * Solid reading, writing, and verbal communication skills and the ability to present information in both internal and external settings. * Basic math skills - add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. You'll need to be able to follow instructions for mixing on product labels. * Licenses/certificates as required by federal, state, and/or local regulations (covered by us) * Customer-facing experience preferred Why Choose Us? A career with the Rentokil family of companies can be a professional trajectory filled with opportunity. We pride ourselves on being a world-class team that rewards high performance, and we love to promote from within. We offer competitive pay and many of our roles offer performance incentives. Below you'll find information about some of what we have to offer. All Full-Time Colleagues qualify for the following and Part-Time Colleagues qualify for most benefits after they meet certain criteria. Click here to read more about our Total Rewards Program which includes: Professional and Personal Growth * Multiple avenues to grow your career * Training and development programs available * Tuition Reimbursement benefits (for FT Colleagues) Health and Wellness * Health benefits including Medical, Dental, Vision, Disability, and Life Insurance plus much more * Full-time colleagues are eligible to begin enrollment immediately upon hire with benefits starting on day 1 Savings and Retirement * 401(k) retirement plan with company-matching contributions Work-Life Balance * Vacation days & sick days * Company-paid holidays & floating holidays * A company mindset that prioritizes health, safety, and flexibility We are looking for individuals who want to make a difference where our customers live and work. Is that you? This company is a Drug Free workplace. Rentokil is committed to complying with all Federal, State, and local laws related to the employment of qualified individuals with disabilities. California residents click here to review your privacy rights. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying to this job, you agree to receive initial texts from systems used on behalf of Rentokil North America, Inc., possibly including Workday, Loop, and HireVue. These systems utilize text messages to communicate with you throughout the application, interview, and pre-hire processes. You can set your communication preferences or opt out of text messages from each system at any time following the initial message. Message and data rates may apply.

Cast-Crete is the nation's largest manufacturer and distributor of precast concrete lintels and sills used in concrete masonry construction. Cast-Crete pioneered the precast manufacturing of these products and set the industry standard over time. Today, homebuilders, contractors and other distributors rely on Cast-Crete to reduce construction time and labor costs compared to alternatives. The Company is vertically integrated and delivers its precast products along with complementary items direct to its customers' job sites. Cast-Crete is in the Tampa Bay area and serves the booming Florida housing market. Cast-Crete is in accelerated growth mode and needs great people to join its team to help make it happen. This is a great time to join a market leader in an exciting industry in the Sunshine state. This position performs preventative maintenance tasks on plant equipment and machinery. Duties / Responsibilities Performs a variety of mechanical duties throughout the plant Examines machines to diagnose and troubleshoot equipment failure Performs preventative maintenance Replaces defective parts, reassembles defective parts, makes necessary adjustments to ensure efficient operation Maintains a clean work area and ensure tools are in good working order Reliability and dependability Ability to meet deadlines in a timely manner Job Qualifications (list the minimum education, formal training, skills and experience required) 2 years of manufacturing maintenance experience (preferred) High school diploma or equivalent Must be able to lift at least 25 lbs.

Job Description We are currently seeking a Electrical Maintenance candidate for our glass recycling facility in Sarasota. This position is a hands on, labor intensive position for a glass recycling facility. 1st Shift (Monday - Friday) and overtime on Saturday Electrical experience - siemens, Allen Bradley, or similar brand experience Troubleshoot and Rewire PLC and Conveyors 480 Volt - 3 phase motor Preventative Maintenance on machinery Glass recycling and sorting Operating, maintaining the Optical Sorting Line General Labor tasks as needed Heavy industry and manufacturing Apply ASAP and get started!