Maintenance technician jobs in Woodbury, MN

. Pay Rate: $22.00 an hour with an additional $2.00 an hour shift differential for swing and grave shift ESSENTIAL DUTIES AND RESPONSIBILITIES Maintain a neat and clean appearance for the entire property Empty outdoor trash cans and ashtrays Remove trash from parking lots and sidewalks Maintain and inspect interior and exterior of all buildings Maintain grounds including, but not limited to, mowing, sweeping, raking and laying sod Perform snow shoveling, plowing and removal Complete work orders in a timely manner Move office equipment and furniture as requested Maintain all tools and equipment Perform light carpentry and plumbing repairs Perform Event Center air wall and bleacher setup and maintenance KNOWLEDGE AND CERTIFICATION, SKILLS AND ABILITIES Knowledge and Certification Required: Previous experience in the safe use and operation of power and hand tools and the like Valid driver's license Previous experience in lawn maintenance, snow removal and the like Skills Required: Accurate and detail-oriented Organized and ability to adapt quickly to changing priorities Mechanical aptitude Abilities Required: Ability to work fast and efficiently Ability to independently complete multiple tasks in a professional manner Ability to troubleshoot, maintain and repair specialized equipment Ability to maintain high confidentiality Ability to interact with guests, coworkers and management in a professional and courteous manner Ability to follow established dress code policies and practice good personal hygiene REQUIRED TRAINING Treasure Island guest service training Bloodborne Pathogens training Any position-related training as determined by department manager PHYSICAL DEMANDS Must be able to walk and/or stand for long periods of time Must have a good sense of balance, and be able to bend and kneel Must be able to push, pull and grasp objects regularly Must be able to climb a ladder Must be able to independently lift 25+ pounds routinely Must have manual dexterity necessary to manipulate tools and equipment Must have good eye hand coordination Must be able to operate foot pedals WORKING ENVIRONMENT Work is performed throughout the entire property (inside and outdoors) and may include excessive noise, such as power tools, dust and fumes from paints, varnishes, stains and the like, flashing lights, frequent loud noises and cigarette smoke Required to work in extreme weather such as wet, damp, high wind, ice and snow Must be able to work in cramped, tight quarters Occasionally overtime may be required Must be willing to work a flexible schedule including all shifts, weekends and holidays

We are seeking a skilled and dedicated Maintenance Technician to join our team. The ideal candidate will possess strong mechanical knowledge and experience in facilities maintenance, ensuring that all equipment and systems are functioning efficiently. This role requires a proactive approach to problem-solving, excellent customer service skills, and the ability to work independently as well as part of a team. Duties Perform routine maintenance and repairs on various equipment and systems, including mechanical, electrical, and plumbing. Utilize tools such as an ohmmeter for troubleshooting electrical issues. Maintain accurate records of maintenance activities using Computerized Maintenance Management Systems (CMMS). Supervise and lead maintenance projects, ensuring tasks are completed on time and to standard. Collaborate with other departments to address facility-related concerns and improve overall operations. Respond promptly to maintenance requests from staff and ensure customer service excellence. Conduct inspections of facilities and equipment to identify potential issues before they become major problems. Assist in the training of new maintenance staff as needed. Requirements Proven experience in facilities maintenance or a related field. Strong mechanical knowledge with the ability to troubleshoot various systems. Familiarity with logic controllers is preferred. Excellent leadership skills with the ability to supervise effectively. Strong customer service orientation with good communication skills in English. Ability to work independently and manage multiple tasks simultaneously. A valid driver's license may be required for certain positions. If you are passionate about maintaining high standards in facility operations and have the skills we are looking for, we encourage you to apply for this exciting opportunity as a Maintenance Technician. All shifts are available.

Maintenance Technician First Shift Hours: Monday-Friday 7am-3pm Compensation: $28-$32 per hour About The Job: Lakeside HR Group has been engaged by our client to recruit for a Maintenance Technician to join their manufacturing team. Our client is a leading North American manufacturer of high-quality, durable industrial and storage products used across a variety of industries. They are known for their strong company culture, focus on safety, and dedication to innovation and continuous improvement. If you're a hands-on problem solver who enjoys keeping machines running smoothly and takes pride in maintaining a safe, efficient production environment, this could be a great opportunity for you. You'll join a team that values collaboration, reliability, and craftsmanship in everything they do. Key Responsibilities: Perform preventive maintenance on electrical, mechanical, and industrial equipment. Troubleshoot and repair production equipment such as control panels, compressors, ovens, bearings, drives, and HVAC units. Weld, cut, and grind metal for mold and machine repairs. Build and remodel equipment for manufacturing operations. Maintain accurate maintenance documentation and requisitions. Ensure a safe work environment by following company and OSHA safety guidelines. Support operational teams with technical assistance and problem-solving. Perform additional maintenance and repair tasks as assigned by management. Required Skills: 2+ years of industrial maintenance experience (education or equivalent training considered). Associate's degree in Electrical or Mechanical Maintenance preferred. Journeyman's card in Electrical or Mechanical trades a plus. Experience with rotational molding or plastics manufacturing a plus. Manufacturing experience strongly preferred. Forklift and scissor lift certification required. Strong troubleshooting, mechanical, and electrical aptitude. Ability to lift up to 50 lbs and work in hot, humid environments. Benefits: Competitive pay and comprehensive health benefits 401(k) with company match Paid time off and holidays Opportunities for advancement within a growing organization Supportive, team-oriented culture focused on safety and quality About Lakeside HR Group: At Lakeside HR Group, we understand that finding the right job is essential for your career success. We are a boutique-style human resources consulting and recruiting firm dedicated to providing personalized, tailored solutions. When you partner with us, you are not just getting a recruiter; you are getting the entire Lakeside team working together to support your career goals. Partner with us at Lakeside HR Group, where we are more than just a recruiting firm; we are your partners in achieving your career aspirations.

About Us Endeavor Air is a wholly-owned subsidiary of Delta Air Lines. Flying as Delta Connection, Endeavor operates 141 regional jets on 750 daily flights to 122 destinations in the United States, Canada, and the Caribbean. Headquartered in Minneapolis, Minn., Endeavor has hub operations in Atlanta, Cincinnati, Detroit, Minneapolis, New York, and Raleigh-Durham, and 11 maintenance bases across our network. Our Culture We know that our people are our greatest assets, and we are committed to building a culture where employees love coming to work each day. At Endeavor Air, we foster a diverse, culturally-rich and safe workplace where employees are treated with dignity and respect. With a culture built on safety, excellence, and teamwork, Endeavor offers limitless potential for aviation professionals looking to start or continue their careers. Our team promotes an inclusive environment in all aspects of the airline and our operation. As an EEO employer, we provide opportunities for all qualified candidates without regards to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran, or disabled status. Overview The Aircraft Maintenance Technician (AMT) is responsible for maintenance and repairs to keep aircraft working safely and efficiently. Responsibilities Responsible for the maintenance and preventive maintenance of aircraft, components and equipment. Determine airworthiness of aircraft and components, in accordance with established procedures and Federal Aviation Regulations. Service and inspect aircraft, components and related equipment. Perform aircraft jacking, lifting, towing, and manual movement. Operate and inspect powered and non-powered ground equipment. Perform structural repair, inspects and identifies for prevention and repair. Complete aircraft maintenance forms entries and enters data into the Maintenance Data System, ensures entries are accurate and complete. Responsible to maintain a clean and orderly work area. Demonstrate behavior in accordance with Endeavor Air Code of Conduct in all Company business dealings and decisions. Demonstrate a high level of focus on customer service. Qualifications High School Diploma, GED, or equivalent Must hold a valid Airframe and Power Plant (A&P) Mechanics license Professional work experience in aviation maintenance field preferred Ability to work in a fast-paced environment handling multiple tasks with a high degree of attention to detail Strong work ethic, reliable, self-motivated with a positive attitude, and customer service oriented Ability to travel internationally with the ability to hold a passport required within 3 months of hire; passport expenses are paid for by the employee Ability to read, write, speak and understand English Must possess a valid driver's license and if position requires use of company vehicle(s), must be insurable under company insurance coverage Work Environment & Physical Demands A uniform is required; Endeavor Air provides a uniform allowance. Safety shoes are required and cost covered by employee. Work is performed at the airport, outstations and various repair material vendors. Requires contact with staff and business relationships with management staff. Required to work nights, weekends, holidays and overtime, as necessary. Physical exertion such as: pulling, pushing, reaching, bending, standing, walking and light lifting of boxes, bags, files and electronic equipment not in excess of 50 lbs. Must be able to use ladders, work stands, lifts, etc. and be able to work on all areas of the aircraft that may require access during performance of duties. Must not have any medical conditions that preclude certification of aircraft run/taxi of company aircraft and vehicles. Some travel required. What We Offer Providing world-class service to our customers starts with providing world-class benefits to our employees. Endeavor Air employees receive a competitive total compensation package which includes a variety of benefits to choose from and some of the best perks around. Free or reduced-rate travel privileges on Delta Air Lines and 80+ air carriers worldwide for employees and eligible family members Comprehensive Medical, Dental, and Vision Plans 401(k) with Company Match starting on Day 1 Operational Performance Rewards (OPR) Program Life and AD&D Insurance, Short and Long-term Disability, Flexible Spending Accounts (FSA), and voluntary supplementary benefit options FLSA Status Hourly Minimum Position Pay Range USD $31.40/Yr. Maximum Position Pay Range USD $39.50/Yr.

Why you will enjoy working with Diamond: Competitive weekly pay Great health benefits include Health, Dental and Vision Insurance, HSA and FSA options, a 401(k) Retirement Savings Plan, a 529 CollegeSavings Plan, and Colonial Life Benefits Employer contributions to an HSA A close-knit team environment Monthly staff appreciation drawings, quarterly staff lunches and annual holiday events Paid time off and holidays to promote a work-life balance A clean and safe working manufacturing environment Temperature and humidity-controlled environment Casual dress code, free company shirts Paid meal and rest breaks Referral bonuses Volunteer overtime opportunities Job Summary: The technician is responsible for the maintenance, continual operation and continuous improvement of all DOD lines and related auxiliary equipment. This position will optimize mechanical efficiency by adjusting machinery and equipment settings. This position requires a higher mechanical and electrical skill set and past experience on printing or industrial equipment. This position works Monday-Thursday; 1:45pm-11:45pm Essential Duties and Responsibilities: Perform required preventative maintenance on equipment; ensure equipment is running to standard processes; optimize mechanical efficiency by adjusting machinery and equipment settings. Assist with the training of team members on safe and efficient use of equipment. Assist Operators with complex job set ups, trouble-shooting when issues arise Assist Production in adhering to or helping create new procedures as needed Assist operators with remakes and restarts for production: ensuring the correct product is being produced/reproduced. Job sign offs and first article check when needed Proactively communicate essential information to the team including information regarding incomplete repairs and any potential problems on the lines. Participate in developing action plans to create greater efficiencies and resolve potential issues with safety, quality, production and 5S Use the appropriate hand/power tools, electric and volt meters, equipment to diagnose, troubleshoot and repair/replace parts Other duties as assigned Requirements Minimum of two years of experience in the print industry as a Machine Operator High School diploma or equivalent Prior experience troubleshooting PLC devices, printers and labelers; Pneumatic and hydraulic Experience in encoding and imaging including barcode construction Software Knowledge of Data-Trac and GT preferred Software knowledge of CPST, Atlantic Zeiser and Precision Finishing lines Shrink-wrap and oven operational knowledge Multi feeder and labeler operational knowledge Hot melt equipment and operational application knowledge Ability to communicate effectively with all levels within the company Proficient in basic computer operations Strong problem solving abilities High attention to detail Knowledge of OSHA regulations and lock-out tag-out procedures Flexible and willing to work over-time and/or weekends as needed Preferred: · Technical Degree and/or five years minimum experience in the print industry as an Operator Salary Description $26-32

Job DescriptionBenefits: Bonus based on performance Flexible schedule Opportunity for advancement Company parties Skilled Handyman / Craftsman If you are a handyman, you understand how important it is to be versatile. If you are able to adapt and change to many different activities, you might be the right fit for this job. Handyman Connection of Eden Prairie is seeking an experienced handyman for residential and light commercial work. Benefits Make anywhere between $25-$50/hour plus bonuses! Professional office support regarding scheduling, customer support and job tracking Free access to custom mobile application for scheduling and communications Successful marketing campaign that brings us well-qualified customers Branded apparel and signage Serve the great people of Eden Prairie and the surrounding area Job Summary Provide basic construction skills for residents and businesses in Eden Prairie and the surrounding area Bid work and produce it with great satisfaction Effectively communicate with clients and suppliers Job Requirements Great customer service and client relations Basic knowledge of building codes Must have current driver's license and insurance Must have tools, work vehicle and good references Must have experience in the remodeling or home repair trades Must pass screening process which includes a background check Independent contractors must carry liability insurance and workers comp Must have a smart phone and access to the Internet Experience in multple skills recommended: General Carpentry - Rough and Finish Bathroom Upgrades/Remodel Kitchen Refresh/Remodel Painting Interior and Exterior Drywall Repair/Patching/Caulking Minor Plumbing and Minor Electrical Knowledge Flooring Repair and Installation Handyman, General Home Repairs and Maintenance Work Our customers love us! One happy customer recently said, "We had Handyman Connection out to do work on our stairs and couldn't be happier with the end result! Our stairs are fully finished and matched our floors perfectly. Great craftsmanship, and done at a great price! I will recommend to friends and family for their home improvement needs! Thank you again!" Apply today to become our next Handyman! Join a team where quality workmanship and customer satisfaction come first! Apply now and start crafting your future with us!

Job Description About Sentinel Sentinel Management Company has been a trusted name in the property management industry since 1972. We specialize in managing a diverse portfolio of residential apartment communities, healthcare facilities, retail spaces, and office properties primarily in the Twin Cities market. Our mission is to provide high-quality housing and exceptional services to all members of our community. At Sentinel, we are more than a property management company. We are a people-first team dedicated to creating thriving communities. We believe in doing the right thing, building meaningful relationships, and delivering exceptional living experiences. Job Summary We are seeking a full-time Maintenance Technician to join our brand-new, 303-unit multifamily community in Golden Valley, MN. The ideal candidate can perform general and preventative maintenance and building repairs. Duties include, but are not limited to apartment turns, basic carpentry, drywall, plumbing, electrical, HVAC, appliance repair, and painting. Key Responsibilities Perform routine and preventive building systems maintenance Troubleshoot and repair appliances, HVAC systems, plumbing and electrical Complete drywall repairs, painting, and general carpentry as needed Respond to and complete maintenance service requests, document the status of each request and ensure that appropriate follow-through occurs Perform repairs on air conditioner, heating units, and refrigeration units (use of refrigerant recovery equipment requires proper certification) Replace apartment locks on rental apartments as necessary and on all recently unoccupied units, outside doors, and outbuildings to ensure security of the community Servicing residents in a friendly, customer service-oriented manner Ensure compliance with safety standards, building codes, and company policies Maintain tools, equipment, and work areas in a clean and safe condition Assist with vendor coordination and oversight of contracted work as needed Complete apartment turns, ensuring units are ready for new residents Other duties as assigned Requirements Maintenance or repair experience, preferably in property management Must hold a Certified Pool Operator (CPO) Certification A special Boiler's license is preferred but not required. HVAC certification is preferred but not required Must have a valid US driver's license Must be able to lift up to 75 pounds on occasion Must be able to pass a criminal background check Excellent organizational and time management skills Must be able to handle confidential information Available for after-hour emergencies as needed (on-call rotation) Maintenance: 5-7 years (Required) Job Type: Full-time, On-Call required on a rotating basis Hourly wage will be based on skills and previous work experience. Standard work hours are Monday through Friday 8:30 am to 5:00 pm and a rotational on-call schedule. Extended and weekend hours are required in emergency situations, and for month-end turns or special projects if needed. Benefits Generous compensation package Comprehensive benefits including medical, dental, and vision 401(k) plan with employer match Paid time off and paid holidays Company-paid life insurance Rent discount Ongoing professional training, development, and growth opportunities Please visit Careers | Sentinel Management - Premier Property Management in Twin Cities to view job postings and review Sentinel's company website! Sentinel Management Co. is an equal opportunity employer.

rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at ******************** and ********************** 2nd Ops Technician Position Summary The 2nd Ops Technician I is responsible for ensuring quality parts are completed per the operation specifications listed on the print, process sheets, or work order. This position will perform standard and repetitive sequences of operations and setups on blasting, buffing, polishing, laser marking, laser welding, and deburring equipment. Other processes include light assembly and packaging components and product in preparation for shipping. 1st Shift: Monday - Friday 6:00 am - 2:30pm Responsibilities 2nd Ops Technician Duties and Responsibilities * Set up and operate equipment for laser marking, laser welding, blasting, buffing, polishing, assembly, and deburring * Maintain average machine set-ups and targeted rates per hour efficiencies * Perform preventative maintenance to ensure consistent machine performance * Finish products in accordance with customer, regulatory, and company requirements * Work on components that require adjusting, fitting, and aligning to close tolerances * Use basic inspection equipment such as a micrometer, caliper, Micro Vu, Optical Comparator plug gages and thread gages to inspect parts * Read and understand basic blueprints * Inspect products per the In-process Inspection (IP) * Read and understand routers, DPM's, MPS procedures and work order travelers * Assemble and package diversified medical components, sub-assemblies, or products to customer requirements to procedure, instructions and prints * Determine packaging by looking at the bill of materials (BOM) * Adhere to clean-room requirements * Perform a variety of duties such as molding, washing, label printing, labeling, deburring, tray and pouch packaging and sealing and boxing for sterilization. * Deburr parts to print using deburring knives, hand grinding tool, dremel, or other deburring tools * Identify and remove burrs from all types of thread holes and plate assemblies * Read and understand job layouts * Use a microscope and hand tools * Operate laser marking and welding equipment Qualifications 2nd Ops Technician Qualifications * Ability to run a variety of secondary operations equipment * Ability to use a microscope and hand tools * Ability to perform a variety of work duties * Microsoft Office proficiency (Outlook, Word, Excel, PowerPoint, Publisher) * Clear and effective verbal and written communication skills * Attention to detail * Organizational skills * Ability to work in a fast-paced team environment * Ability to prioritize and multitask Desirable Criteria & Qualifications * 1 year of experience in a manufacturing environment * Medical manufacturing experience * Experience working in a highly regulated industry (FDA, ISO) rms Company Benefits As a Cretex Medical company, rms offers a full benefit package to its employees. Benefits include medical, dental, vision and life insurance options. rms also offers a 401(k) retirement plan with employer match, profit sharing, short- term and long-term disability insurance, paid time off, holiday pay, and an onsite medical clinic. rms Company also offers company specific benefits, such as: * Onsite Clinic * Paid Parental Leave * Monthly Social Events * Annual Employee Appreciation Week * Volunteer Opportunities * Training and Development Opportunities * Tuition Reimbursement * Wellness Program Cretex Companies use cutting oils, solvents, and other chemicals in the manufacturing process. Testing is conducted on a periodic basis to ensure that all chemicals are kept well below the OSHA permissible exposure levels. Pay Range USD $20.00 - USD $24.00 /Hr. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

Job DescriptionA day in the life You arrive for 2nd shift and take the handoff from the day crew. A work order flags a hydraulic leak on a packaging line. You trace the issue, swap a worn hose, test pressures, and fine-tune the controls to get throughput back on target. Between calls, you complete preventive maintenance on a facility air compressor and document findings so the next scheduled service is seamless. Throughout the night, you keep equipment safe, reliable, and production-ready using a mix of mechanical, electrical, pneumatic, and hydraulic know‑how. Compensation & benefits Pay Rate: $32.00 - 36.00/hour, depending on experience Full benefit package including vacation, medical, 401k Schedule 2nd Shift: Monday - Thursday, 2:30 PM - 1:00 AM (a $1.00 shift differential applies) What you'll do Install and maintain production machines and facility equipment to keep operations running smoothly. Respond to emergency/unscheduled repairs during production and perform scheduled maintenance during service windows. Apply mechanical, electrical, pneumatic, and hydraulic troubleshooting skills to repair production machinery. Read and interpret equipment manuals and work orders to carry out required maintenance and service. Diagnose faults, replace or repair parts, test, and make precise adjustments. Execute routine preventive maintenance on machines, equipment, and plant facilities. Use a range of hand and power tools, electric meters, and material handling equipment safely and effectively. Identify faulty operations or defective materials and promptly report unusual situations to supervision. Comply with safety regulations and maintain clean, orderly work areas. Qualifications High school diploma/GED and completion of a craft apprenticeship, or an equivalent combination of education and production maintenance experience. 4+ years of manufacturing experience with strong hydraulic, pneumatic, mechanical, and industrial skills; some Electrical and PLC experience. Why this role matters Your work directly supports site business goals by executing safe, predictive, and productive maintenance systems and processes that minimize downtime and boost throughput. All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, national origin, sexual orientation, gender identity, disability, veteran status or any other characteristic protected by federal, state or local law.

Maintenance Technician We are currently hiring for a Maintenance Technician on 2nd shift for our maintenance team!!! Opportunity awaits you at CATALLIA MEXICAN FOODS! Do you want to work for a company that is committed to growing the capabilities of their employees while working in a diverse environment? Are you looking for new ways of thinking while challenging and expanding your knowledge? If so, you have come to the right place. Catallia Core Values: Sharing our cultural traditions, Hispanic food expertise and 30 years of tortilla manufacturing experience, we work hand-in-hand with customers to deliver authentic products and innovative solutions that meet today's market needs. We honor that promise with our commitments to customer-focus collaboration, industry leading quality, innovation and team empowerment, high ethics and integrity in all partnerships, and proven food safety and personal safety standards. Position Overview: This is a hands-on position and will require that the individual to troubleshoot, service, repair, adjust automated equipment and building systems. This individual will be responsible for contributing to a consistent, safe, and productive work environment and adhering to operational and personnel policies and procedures. With a focus on the success of the overall operation, the individual will work closely with the maintenance team to handle repairs of automated equipment and other scheduled maintenance activities. Key Responsibilities & Essential Functions: Contribute to an effective, predictive, and preventative maintenance program (including repair, modification, and installation of equipment) in order to improve production efficiency and ensure optimum machine time availability. This will include Robotics, Automated Processing Equipment, HVAC systems, Refrigeration Systems and other plant operational systems. Regularly inspect plant facilities, production support systems and equipment in order to support effective plant operation. Respond to line calls from production to assist with the uptime of the equipment. Will occasionally communicate and work with outside contractors. Maintain facility and equipment for safety (food and teammate) issues and respond appropriately. Contribute to a fully operational maintenance shop by communicating needs and keeping the area neat and organized. Communicate effectively with maintenance team members from other shifts to ensure clarity and continuity. Follow instructions as directed by the Maintenance Manager or a designate of the Maintenance Manager. General Responsibilities: Promote all plant safety, GMP's and food safety policies and procedures Actively participate in Food Safety and Food Defense related activities Perform additional duties as directed. Education & Experience: High school graduate or equivalent 1-2 year Technical Certification in maintenance mechanics, electricity, electronics, or 3-4 years of industrial maintenance experience. Experience in a food production or bakery environment is a big plus. Experience in building and automated equipment with a high mechanical aptitude. Experience with automated food processing equipment a plus. TIG welding and fabrication skills required. Troubleshooting mechanical, some lighter electrical control with the use of a volt meter, sensors, motors, etc. Specific Competencies: Proficiency in equipment evaluation, installation, maintenance and repair. Ability to identify problems and react appropriately. Commitment to process improvement Proficiency with a wide range of tools and applications General Competencies: Ability to work alone or on teams Hands on individual Self-motivated Flexibility Excellent interpersonal communication skills Attention to detail Integrity Physical Requirements/Environment: Stand/Walking: Continuously (6-8 hours or more) Grasp: Continuously (6-8 hours or more) Pull/Push: Occasionally Lift/Carry: Continuously/Frequently up to 50lbs. Physical Environment: Continuously work around moving machinery, working in a temperature controlled 75-degree environment. Catallia Mexican Foods is an Equal/Opportunity/Affirmative Action Employer. All qualified applicants will be considered without regards to race, national origin, color, religion, age, genetics, sex, sexual orientation, gender identity, disability, or veteran status. Compensation details: 31-34 PIb78f1895ccd2-31181-38976086

The A- Tech Assists in directing junior technicians and functions as a skilled-level technician who can inspect, diagnose, and perform automotive repairs and preventive services. Essential Job Functions Provide Helpful, friendly, and timely service to customers with a We Can Do That attitude. Inspects, diagnoses, and identifies repairs in automotive systems including brakes, alignments, suspension, and cooling systems. Ability to diagnose, repair and assess engines. Changes oil and/or transmission fluid and filters. Install and perform tire maintenance. Road test vehicles. Helps increase sales, improve store profitability, and reduces controllable expenses. Leads and mentors junior technicians to assist in their growth and development. Maintain a clean and safe work environment. Recommends tires, parts, and services to Service Manager for customers. Ability to work in a fast-paced, results oriented team environment. Treats all teammates, customers, vendors with dignity and respect. Maintain a clean and safe work environment. Requirements: Position Requirements: Valid Drivers license and acceptable driving record. Ability to perform continued standing, bending, crouching, twisting, and crawling ASE certifications and/or technical school degree are preferred but not required. Experience: Tire service: 5 years (Preferred) Compensation details: 90000-100000 Yearly Salary PIed38f1a91656-31181-39168440

We are seeking a skilled and proactive Maintenance Engineer to support the reliability, efficiency, and performance of our manufacturing equipment and systems. This role focuses on analyzing, designing, and improving maintenance processes, troubleshooting complex equipment issues, and implementing solutions to minimize downtime. The Maintenance Engineer will work closely with maintenance, production, and engineering teams to ensure operational excellence across our facilities. DUTIES AND RESPONSIBILITIES Analyze equipment performance, identify root causes of failures, and develop engineering solutions to improve reliability. Design, implement, and optimize maintenance strategies, including preventive and predictive maintenance programs. Collaborate with production, safety, and engineering teams to support operational goals and equipment upgrades. Provide technical support for troubleshooting mechanical, electrical, and automation issues. Assist in the planning and execution of capital projects, new equipment installations, and facility improvements. Maintain documentation of maintenance activities, work orders, and technical specifications. Evaluate and recommend tools, materials, and equipment to support maintenance and process improvements. Ensure all engineering and maintenance work complies with safety standards, company policies, and regulatory requirements. Contribute to continuous improvement initiatives to increase efficiency, reduce downtime, and lower maintenance costs. REQUIRED QUALIFICATIONS Qualifications 3-7 years of experience in a manufacturing environment, with hands-on maintenance or engineering support. Strong knowledge of industrial equipment, machinery, automation systems, and facility operations. Experience with preventive and predictive maintenance programs. Familiarity with CMMS systems (e.g., EMaint) and ERP systems (e.g., SAP) preferred. Strong problem-solving, analytical, and project management skills. Excellent communication skills and ability to collaborate effectively with cross-functional teams. Commitment to safety, quality, and continuous improvement initiatives. ATTRIBUTES Adaptability: Ability to adapt to changing work priorities and environments, demonstrating flexibility and willingness to take on different tasks as directed by the hiring manager. Communication Skills: Effective verbal and written communication skills, enabling clear and concise communication with team members and supervisors. Safety Consciousness: Commitment to adhering to safety protocols and procedures, ensuring a safe working environment for oneself and others. Desire for Learning & Continuous Improvement: Eagerness to learn and develop new skills, with a willingness to participate in training programs and pursue continuous improvement opportunities within the role. Actively seek opportunities to improve efficiency and productivity within assigned tasks, suggesting ideas for process enhancements or workflow optimization. Reliability: Dependability in fulfilling assigned tasks and responsibilities consistently, contributing to the overall efficiency and effectiveness of the team. Positive Attitude: A constructive and optimistic approach to challenges and tasks, fostering a supportive and encouraging work environment. Team Player: Ability to collaborate effectively with colleagues, demonstrating respect, empathy, and cooperation in achieving shared goals. Problem-Solving Skills: Capacity to approach issues or obstacles with creativity and resourcefulness, seeking practical solutions to improve processes and outcomes. Professionalism: Conducting oneself with professionalism and integrity, adhering to ethical standards and company policies in all interactions and activities. PHYSICAL DEMANDS The physical demands and work environment described here are representative of those that must be met by the employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. Lifting, Carrying, Pushing, and Pulling Frequently able to lift or move up to 35lbs Occasionally able to lift or move up to 50lbs Continuously stand and walk throughout the workday Environmental Exposure Continuous exposure to indoor manufacturing environment Occasional exposure to chemicals and fumes Continuous exposure to moderate noise Body Movements Frequently reach with hands and arms; use hands to manipulate, handle, or feel material Continuous use of hands/fingers to grasp, pinch, pull, feel, or handle and manipulate parts and tools Frequent repetitive motions Vision Abilities Continuous requirement of specific vision abilities including close vision, distance vision, color vision, depth perception, and ability to focus. Safety Measures Continuously wear eye protection (Industry standard safety equipment is provided by the Company, and specific notice is posted in areas where safety equipment is required). These physical demands and work environment conditions are essential for the successful execution of the job duties. The Company is committed to providing reasonable accommodation to individuals with disabilities, ensuring an inclusive and accessible workplace. Overtime May require working additional hours during peak production periods. WORK ENVIRONMENT Inside, well-lit, and climate-controlled manufacturing environment. COMPENSATION $45 - $47 per hour DOE MACHINES, TOOLS, EQUIPMENT, AND WORK AIDS Working knowledge of manufacturing machines and inspection equipment. EQUAL OPPORTUNITY EMPLOYER Wilson Tool is an equal opportunity/affirmative action employer. Women, minorities, individuals with disabilities, and veterans are encouraged to apply. This is not an employment agreement or contract. Management has the exclusive right to alter this job description at any time without notice. **************************

The Minnesota Veterans Home - Minneapolis recognizes the great courage of the individuals who fought for our freedom. Our facility has been providing care to Veterans since 1887. Our beautiful and historic campus is located on 51 wooded acres overlooking the Mississippi River. We provide skilled care, boarding care and adult day care services for veterans. Free parking is available and we're easily accessible by bus, car or Light Rail Transit. Job Description This position is responsible for performing skilled mechanical work in the maintenance, repair, replacement, and operation of heating and power equipment, and other mechanical systems. Qualifications State of MN Engineer's License, 1st class B or higher Valid Class D Driver's License Physical Requirments: Occasionally lifting articles up to 50-pounds and frequently lifting and/or carrying objects such as heavy tools. This job may require walking or standing for a significant period of time. A pre-placement physical, Tuberculosis (Mantoux) test and DHS criminal background check is required prior to hire for this position. Additional Information HOW TO APPLY FOR THIS POSITION: **If you are interested in this position, please submit your resume and apply online at the State of Minnesota careers website: ************************** The closing date is February 4, 201. The job posting number is 2549.

The production line mechanic will be responsible for all production maintenance, including product quality control, line maintenance, and repair of line machinery and equipment. This role involves applying mechanical expertise in determining work methods and procedures for producing quality product. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Responsibilities: Follows, without exception, all work instructions and safety policies, including use of all PPE and safety equipment Performs routine preventive maintenance checks on all production equipment and machinery Repairs basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switches Observes and listens to mechanical devices in operation to locate causes of problem Dismantles devices to gain access to and remove defective parts Lubricates and cleans machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plant Accomplishes all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiency Follows all safety rules and procedures including Lockout/Tagout program, housekeeping and observes the operations to insure a safe work environment Performs other related duties as assigned Requirements: High School Diploma or GED 3-5 years' experience in a maintenance-related position within a manufacturing environment; or equivalent combination of training and experience Ability to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc. Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gauges Basic understanding of systems, equipment and schematics Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skills Basic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractions Ability to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties The pay range for this position is $28.00- $32.00 an hour. The exact pay offered will depend on candidate's experience, skills, etc. Mauser Packaging Solutions offers a comprehensive benefits package, including medical, dental, paid time off, and other competitive benefits.

Job Description Indrotec is urgently hiring experienced Facilities Engineers with a current Second Class (C2) Boilers License or higher to support school facilities in the St. Paul area. Candidates holding a valid Special Boiler License are also encouraged to apply and may be considered if actively working toward their Second Class (C2) license. Pay rates will be lower than the posted rate until the Second Class (C2) License is obtained. This is a great opportunity to put your mechanical, custodial, and maintenance skills to work in a steady, long-term position that helps maintain safe and welcoming spaces for students and the community. If you enjoy hands-on work and take pride in keeping buildings running smoothly, we'd love to hear from you. Call Indrotec at ************ for an immediate interview. These positions are temporary for 67 days, after which candidates will be considered for permanent hire. Minimum Qualifications High School Diploma or GED Certificate required. Must possess and retain a Second Class Boiler license or higherissued by the State of Minnesota (No substitutions allowed). Special Boiler License holders may also be considered if actively pursuing their C2 license Pool Certification required within six (6) months of appointment if assigned to a facility with a pool. Knowledge, Skills, and Abilities Knowledge of standard custodial practices and procedures. Familiarity with safe operation of tools, machines, and equipment used in cleaning and maintenance. Working knowledge of boiler and heating plant operation and maintenance. Ability to follow verbal and written instructions. Strong interpersonal skills; ability to interact effectively with school staff, students, and the public. Physical endurance for continuous standing, walking, lifting, and other sustained activity. Ability to lift up to 50 lbs occasionally and push/pull up to 110 lbs. Comfortable with tasks requiring balancing, climbing, stooping, kneeling, or crawling. Essential Duties and Responsibilities Operate and maintain boilers and mechanical systems; inspect, oil, grease, and repair equipment. Clean and maintain floors, carpets, windows, walls, and furniture. Sanitize restrooms and replenish supplies. Perform grounds maintenance: mow lawns, remove trash, clear snow/ice, trim hedges. Open and secure building daily; monitor lighting and security conditions. Perform minor plumbing, electrical, and general repairs. Monitor and report fuel, water, and utility usage. Assist in swimming pool maintenance, including chemical treatment. Respond to emergency situations and follow safety procedures. Working Conditions Frequent exposure to cleaning chemicals and mechanical equipment. Indoor and outdoor work in varying weather conditions. Requires physical stamina and the ability to handle tasks involving lifting, bending, and climbing. Benefits: Health care insurance benefits available first of the month following 60 days of employment. Thirty (30) hours worked per week must be averaged in order to maintain coverage. 401k enrollment is available per the Secure Act guidelines. Earned Sick and Safe time is accrued and can be used per the State of MN guidelines. #IND345

Facilities Maintenance/Operations Engineer (Nights) - $1,500 Signing Bonus (251499) Hennepin Healthcare is an integrated system of care that includes HCMC, a nationally recognized Level I Adult Trauma Center and Level I Pediatric Trauma Center and acute care hospital, as well as a clinic system with primary care clinics located in Minneapolis and across Hennepin County. The comprehensive healthcare system includes a 473-bed academic medical center, a large outpatient Clinic & Specialty Center, and a network of clinics in the North Loop, Whittier, and East Lake Street neighborhoods of Minneapolis, and in the suburban communities of Brooklyn Park, Golden Valley, Richfield, and St. Anthony Village. Hennepin Healthcare has a large psychiatric program, home care, and operates a research institute, philanthropic foundation, and Hennepin EMS. The system is operated by Hennepin Healthcare System, Inc., a subsidiary corporation of Hennepin County. Equal Employment Opportunities: We believe equity is essential for optimal health outcomes and are committed to achieve optimal health for all by actively eliminating barriers due to racism, poverty, gender identity, and other determinants of health. We are committed to equitable care and working in an environment that celebrates, promotes, and protects diversity, equity, inclusion, and belonging. We are committed to bringing in individuals with new cultural perspectives to assist in creating a more equitable healthcare organization. SUMMARY: Hennepin Healthcare has a current opening for a Facilities Maintenance/Operations Engineer in our Facilities department. This full-time position will work nights from 11pm to 7am working ten days on and four days off (every other weekend). Starting pay rate is $39.07 an hour then $41.98 an hour after probationary period. There is also a $1.75 an hour night shift differential and a $1.00 an hour weekend (Saturday and Sunday) differential. A $1,500 sign-on bonus is available for eligible external candidates (contract/temporary workers and former employees returning to HHS within one year are ineligible). Under minimal direction, an employee in this job class performs work of moderate difficulty in the operation and maintenance of a wide range of complex heating, ventilation, air conditioning and refrigeration and/or mechanical and electrical equipment and performs a variety of other moderately difficult electrical and mechanical, building structural, welding and fabrication and general maintenance work; performs related tasks as required RESPONSIBILITIES: Operate and maintain all building systems: HVAC pneumatic and direct digital controls, BAS and VAV systems, A/C units, cooling towers, compressors, emergency electrical power generators, physical heating and cooling plant circulating pumps, ventilation units, refrigeration units, exhaust systems, problems steam PRV stations, and all other related physical plant equipment Operate and respond to pneumatic tube transportation system Repair and operate medical and industrial gases systems: medical air, medical vacuum, oxygen, nitrous oxide, nitrogen, carbon dioxide and welding gases First responder duties for urgent customer requests, life safety, fire, and physical plant system alarm conditions Perform assigned preventive maintenance and corrective repair assignments Read HVAC/Refrigeration control schematics and mechanical blueprints Manage heavy equipment and supplies Perform tasks on portable ladders at varying heights and navigate congested mechanical environments Prepare investigative reports as required for indoor air quality problems Maintain supplies, spare and tool inventory QUALIFICATIONSMinimum Qualifications: Completion of technical college program in Building/Plant Utilities and Maintenance or HVAC Three years of skilled mechanical and facilities maintenance experience or one year of the above experience OR An approved equivalent combination of education and experience Knowledge/ Skills/ Abilities: Must be skilled and experienced in heating, ventilation, air conditioning, refrigeration, electrical, mechanical service and repairs. Technical college program should include coursework in these areas Must be skilled and experienced in HVAC pneumatic, direct digital controls associated with energy management systems, in maintenance and repair of building automation systems Skilled and experienced in pneumatic tube transportation systems is desired Experience in working in an inpatient health care environment is desired Able to read and interpret pneumatic and electric schematics, building blue prints and technical manuals Able to develop and maintain effective working relationships in an organized labor large crew environment necessary Able to orally communicate effectively with customers and to complete written work orders You've made the right choice in considering Hennepin Healthcare for your employment. We offer a wealth of opportunities for individuals who want to make an impact in our patients' lives. We are dedicated to providing Equal Employment Opportunities to both current and prospective employees. We are driven to connect talented individuals with life-changing career opportunities, enabling you to provide exceptional care without exception. Thank you for considering Hennepin Healthcare as a future employer. Please Note: Offers of employment from Hennepin Healthcare are conditional and contingent upon successful clearance of all background checks and pre-employment requirements. Total Rewards Package:We offer a competitive pay rate based on your skills, licensure/certifications, education, experience related to this position, and internal equity.We provide an extensive benefits program that includes Medical; Dental; Vision; Life, Short and Long-term Term Disability Insurance; Retirement Funds; Paid Time Off; Tuition reimbursement; and license and Certification reimbursement (Available ONLY for benefit eligible positions).For a complete list of our benefits, please visit our career site on why you should work for us. Department: FacilitiesPrimary Location: MN-Minneapolis-Downtown CampusStandard Hours/FTE Status: FTE = 1.00 (80 hours per pay period) Shift Detail: Night, Every Other WeekendJob Level: StaffEmployee Status: Regular Eligible for Benefits: YesUnion/Non Union: UnionMin:$39.07Max: $41.98 Job Posting: Aug-27-2025

Benefits: Crown offers a generous starting wage of $31.03, 401K, employee stock purchase plan, pension plan, a tuition reimbursement program for all employees, and more! Crown's comprehensive benefits include FREE company paid health insurance (medical, dental, vision, prescription coverage) for all employees. Second shift is offered a 45-cent differential and third shift is offered a 40-cent differential. This a a progression job, with increases after every 1,000 hours worked. Job Accountabilities: The Maintainer will be responsible for setting up, adjust, repair, overhaul, perform preventive maintenance, quality adjustment checks, and evaluate can line equipment as required to maintain standard quality and quantity production. Has primary responsibility for safe mechanical performance of line and standard production output. Disassemble, replace, reassemble, inspect, and maintain assigned machinery and equipment as required. Measure and record all can dimensions against specifications. Maintain records of production, quality and other related records as directed. Troubleshoot mechanical issues; perform mechanical repairs and maintenance for production equipment. Has primary responsibility for safety for all areas of assigned duties. The successful candidate will be required to complete an 4,000-hour training program to be fully qualified as a Maintainer. Extensive on-the-job-training (OJT) will be provided. About Crown: CROWN Cork & Seal USA, Inc., a wholly owned company of Crown Holdings, Inc. is a global leader in the design, manufacture, and sale of packaging products for consumer goods. At Crown, we are passionate about helping our customers build their brands and connect with consumers around the world. We do this by delivering innovative packaging that offers significant value for brand owners, retailers, and consumers alike. With operations in 47 countries employing over 33,000 people and net sales of over $11 billion, we are uniquely positioned to bring best practices in quality and manufacturing to our customers to drive their businesses locally and globally. Sustaining a leadership position requires us to build a team of highly talented, dedicated, and driven individuals. Division Overview: Crown's Closures, Aerosol & Promotional Packaging (CAPP) Division manufactures a variety of packaging solutions for the largest consumer packaging companies in North America. Our distinguished list of clients including SC Johnson, Abbott Laboratories and Unilever. We manufacture total packaging solutions including: Closures: We manufacture a variety of decorative food and metal vacuum sealed closures, metal and composite closures, capping systems for glass and plastic container manufacturers. Aerosol Packaging: We manufacture cans and ends for manufacturers of personal care, food, household and industrial products. We offer our customers a broad range of products including multiple sizes, color schemes and shaped packaging. Promotional and Specialty Packaging: We manufacture a wide array of decorative containers with numerous lid and closure variations. Here is your chance to join the CAPP Division. Job Requirements* Must be 18 years or older. Ability to stand, bend, twist, reach, push, pull and regularly lift between 10 lbs. - 50 lbs. Stand at workstation for duration of scheduled shift, which may exceed 8 hours per day. Ability to perform basic math. Ability to proficiently read, write, speak, analyze, interpret, and understand the English language. Ability to work all assigned work schedules and comply with all time and attendance policies. Ability to work in varying temperatures and noise levels. Ability to work cooperatively with others. Must have verifiable mechanical, technical aptitude and experience. Must pass basic Ramsay Mechanical Aptitude Test. Must pass basic Minimizer Test. Must have ability to read and utilize micrometers, vernier calipers, etc. Must be motivated and prepared to participate in S.P.C. projects and functions. Satisfactory progress during progression schedule is necessary for continuation in the training program. Performance will be evaluated at 1,000-hour intervals by the employee's immediate supervisor.

Job Benefits: Monday through Friday work week (8am to 5pm) - No weekend work. Positive work environment. Advancement into a well-paying lifelong career. Locally owned company with the backing of a national brand, Ace Hardware. $35.00 to start - review after 90 days Vacation pay W-2 status with the flexibility of an independent job Mileage and cell phone allowance 15 years in business We are one of the Twin Cites top-rated handyman, repair, and remodeling companies and have provided homes and businesses throughout the Metro with quality craftsmanship for all of their handyman needs. We are currently seeking highly motivated professional {carpenters and handymen with skills in multiple trades. Over 500 4.9 Google reviews We are looking for talented, multi-skilled Craftsmen who are committed to quality work and customer service. Someone who possesses a strong will to complete all tasks assigned in a timely, professional manner. We need an independent thinker with strong problem-solving skills, excellent communication skills and a desire to enjoy the variety we offer. If this describes you; success can be yours with our company! A good overall knowledge of all trades: Carpentry Door and window installations Deck building and repairs Trim and framing Painting Exterior repairs Proper Equipment: Not necessarily having every tool, but knowing what tools are needed for certain tasks. Troubleshooting Skills: Must be a quick thinker and have the ability to be able to examine a problem situation and come up with a resolution in a prompt and professional manner. Excellent Communication Skills: Must be able to communicate with Management, Office Personnel, Fellow Employees, Homeowners, Suppliers, Property Managers and Commercial Customers. Presentable: Clean-Cut appearance Decent looking vehicle Organized tools Other: Looks around the property and communicates to the customer, things you could repair or things that our company can handle. Takes time to earn the customer's confidence and then inquires about additional work that could be performed. Sometimes taking the time to fix something small, then points out to the customer to help them understand that we are capable of doing more. Someone who is punctual, efficient and maintains the highest integrity and strives for top customer satisfaction. Enjoys being an Integral part of a winning team. Demonstrates ability and willingness to EXCEED Customers' expectations. We pay our employees competitive wages, offer incentives, and the ability to grow with the company. If this sounds like the kind of position you've been looking for we want to hear from you. Apply today! Compensación: $35.00 per hour The 800+ Craftsmen who represent our Brand are the heart and soul of our turn-key, white-glove home repair, maintenance, and improvement service. They are skilled and experienced in many trades, but their professionalism and attention to detail is what sets them apart from others who work in the industry. Most of the projects completed are for Repeat and Referral Customers-folks truly appreciate our high level of service, and they often request additional work by asking for particular Craftsmen by name. If you take great pride in your skills and abilities and wish to join a proven, winning TEAM, please apply to the position(s) available by selecting "Show Me All Jobs" above. Ace Handyman Services is a franchise network of Independently Owned and Operated Franchises. Your application will go directly to the franchise owner, and all hiring decisions will be made by the management of that franchise. All inquiries about employment at this franchise should be made directly to the franchise owner, and not to Ace Handyman Services Corporate.

PRIMARY PURPOSE: This position is accountable for troubleshooting, repairs and performing preventive maintenance relative to the mechanical, electrical, HVAC, plumbing systems and physical structural elements of the center. PRINCIPAL RESPONSIBILITIES: The successful candidate's responsibilities will include, but not be limited to: Routinely inspects facility, troubleshoots and makes repairs to the mechanical, electrical, air conditioning and plumbing systems, as well as any structural elements on the property Perform a variety of maintenance/minor repair activities on the interior/exterior areas of the property including, but not limited to, painting, drywall, structural elements, including parking lot and sidewalks, plumbing repairs, clears drain stoppages, interior and exterior lighting including lamp, fuse and ballast replacement Operate a variety of equipment to perform preventive maintenance, minor repairs and maintain cleanliness of property Assist other departments, including but not limited to, Marketing to setup events and Local Leasing with placement and repair of carts Perform the job in accordance with all applicable standards, policies and regulatory guidelines (i.e. OSHA standards) to promote a safe working environment Schedule and preform preventive maintenance programs as assigned by management. Ensure the appropriate inventory systems, records, files, material safety data sheets, supplies, equipment and tools are maintained Periodically inspect air handling units, tighten or replace belts, replace filters and grease components. Maintain logs to document activity Performs exterior custodial duties as needed. May include sweeping sidewalks, wet mop sidewalks, operate steam cleaner, operate hand vacuum. Gather trash and empty trash receptacles; operate compactor and turn trash carts May perform additional maintenance duties as assigned MINIMUM QUALIFICATIONS: High School Diploma or GED preferred. Technical School certifications and/or training preferred Minimum 2-3 years building maintenance experience performing some carpentry, HVAC, electrical, mechanical, and plumbing functions Ability to read and interpret documents, plans and schematic drawings and comprehend instructions. Ability to effectively present information to departmental management, employees, tenants, and outside contacts Ability to apply common sense understanding to carry out instructions furnished in written or oral form. Ability to define problems, collect information and establish facts. Paint, electrical, plumbing, and drywall skills Self-starter with ability to work independently Capability to diagnose problems on equipment Knowledge of basic electrical systems Knowledge of safety rules, hazards and application of accident prevention measures Basic knowledge of fire protection hydraulic system and fire protection alarm systems Ability to work days, evenings, weekends, and holidays Valid Driver's License Ability to lift and carry up to 50 pounds #ZR2