Maintenance worker jobs in North Charleston, SC - 370 jobs

The ideal candidate for this position is a currently enrolled student looking for employment during scheduled academic breaks. ESSENTIAL JOB FUNCTIONS * Performs lawn care duties, including mowing, trimming, edging, and weed eating grounds as needed. * Maintains the fairways, rough, and bunkers. * Trims bushes and trees. * Clears land. * Maintains pond banks. * Keeps maintenance shop clean daily. * Performs light maintenance and painting as necessary. * Performs daily maintenance on equipment. * Applies chemicals. * Maintains clubhouse and tennis court areas. * Serves as back up to co-workers. * Performs other duties as assigned. MINIMUM REQUIREMENTS * High School Diploma or equivalent. * One-year experience performing grounds keeping, landscaping, or outdoor laborer work. Prior experience at a golf course preferred. * Any combination of education and experience totaling one-year may be considered. * Valid South Carolina Driver's license. KNOWLEDGE, SKILLS AND ABILITIES * Knowledge of grounds keeping. * Knowledge of safety practices involved in grounds keeping. * Knowledge of department policies and procedures. * Knowledge of golf course care. * Skill in the use of greens, fairway, tee, and rough mowers. * Ability to communicate effectively both orally and in writing. * Ability to operate weed eater, edger, chainsaw, and brush cutter. * Ability to perform heavy lifting. * Ability to be attentive to surroundings while working on a golf course. * Ability to multi-task. PHYSICAL DEMANDS The work requires exerting up to 20 pounds of force frequently, and up to 50 pounds of force occasionally to move bags of fertilizer and other objects and the following physical abilities: balancing, climbing, crawling, crouching, feeling, fingering, grasping, handling, hearing, kneeling, lifting, mental acuity, pulling, pushing, reaching, repetitive motion, speaking, standing, stooping, talking, visual acuity, and walking. WORK ENVIRONMENT The work is typically performed outdoors with constant exposure to noise, dirt, grease, irritating chemicals, insects, inclement weather and golfers. Employee exposed to a variety of maintenance equipment and chemicals. REASONABLE ACCOMODATION To perform this job successfully, an individual must be able to perform the essential job functions satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the primary job functions herein described. Since every duty associated with this position may not be described herein, employees may be required to perform duties not specifically spelled out in the , but which may be reasonably considered to be incidental in the performing of their duties just as though they were written out in this job description. The City reserves the right to revise this position description at any time.

Job Code: Maintenance Technician (FT) Address: 1001 Spring Valley Drive City: Hanahan State: SC Country: United States of America Description Who is RHP Properties? Headquartered in Farmington Hills, Michigan, RHP Properties (************ is the nation's largest private owner and operator of manufactured home communities. With more than 370 communities throughout 30 states, we continue to expand our footprint to provide accessible and affordable housing across the country. All of this would not be possible without the energy and drive of our talented employees! We invest in our employees, with regular training, opportunities for advancement, and fun events to bring everyone together. We are presently seeking a Maintenance Technician for our Spring Valley Community located in Hanahan, SC who will perform general grounds and lawn maintenance, as well as basic repairs to homes owned by the community, for 40 hours per week. As a successful Maintenance Technician, you will: * Perform maintenance to ensure homes and community areas are in proper condition. * Execute assigned work orders and report status to the Community Manager timely and efficiently. * Promote goodwill by handling all contacts with residents, prospective residents, visitors and other employees in a spirit of courtesy, cooperation and attentiveness. * Use established procedures to identify deficiencies and take immediate action with community manager approval. * Ensure community grounds are appropriately manicured. Regularly treat for weeds, rake leaves, plant flowers/shrubs, spread mulch/woodchips/stones, trim shrubs and hedges, cut down and remove tree limbs as needed, and perform other lawn care services as necessary. * Remove and dispose of garbage on community grounds, including common areas, main entrance and from resident's sites as needed to maintain community appearance. * Perform snow removal using a snow blower, hand shovel or a plow truck, as applicable. * Advise Community Manager or Maintenance Supervisor of residents who do not properly dispose of their excess garbage or have large/bulk items that may require pickup arrangements. * Perform regular inventories of maintenance and grounds equipment and supplies to advise Community Manager of equipment and supply needs. * Maintain order and appearance of garage and storage areas. * Maintain all maintenance and grounds equipment to keep it clean and cared for. * Comply with national, state and local health and safety laws to reduce accident occurrences and to protect residents, the company, team members and vendors. * Perform seasonal pre-maintenance service on a timely basis. * Remain available for "on call" duties as needed. * Participate in the refurbishing of Community Owned homes. * Perform repairs and maintain the community water and sewer lines. * Perform other duties as assigned. Minimum Requirements * A minimum of 2 years of maintenance experience, preferred. * High School Diploma or GED preferred. * Excellent customer service skills. * Valid operator's license, maintenance of a good driving record at all times, and insurability under the Company's policy at all times. * Working knowledge of plumbing, electrical, appliance repairs, HVAC, and carpentry. * May need to provide own tools. * Ability to bend, stretch, twist, walk continuously, and access restricted spaces. * Ability to operate maintenance equipment and other equipment. * Ability to lift or to move up to 75 pounds. * Ability to efficiently perform job responsibilities with minimal supervision. * Ability to tolerate exposure to various chemical compounds. Compensation: This is a full-time opportunity with competitive compensation. Benefits include medical, dental and vision insurance, paid time off and holidays, life insurance, and 401K.

Locations - North Charleston, Summerville , Huger , Moncks Corner, Goose Creek, Wando, Charleston , Mount Pleasant Hananhan , & Ladson . **Season is here**Weekly Payment** Work opportunities in the Property Maintenance/property preservation industry Looking for Property maintenance or preservation vendors who meet the following requirements: 1) Experience in property maintenance or preservation duties/tasks (or interested to get trained) including the following work: a. Snow Removal b. Debris/Junk removal c. Lock Changes d. Initial Services (including sales clean) e. Boarding f. General/Minor household repairs, etc. 2) Must have own transportation 3) Meeting client's deadlines 4) Must have the necessary equipment PAY IS BASED ON YOUR BID AND AS PER THE ALLOWABLE LIST.

The Certified Millwright is responsible for the installation, maintenance, alignment, troubleshooting, and repair of industrial machinery and mechanical equipment. This role ensures equipment operates safely, efficiently, and reliably in accordance with specifications, safety standards, and operational requirements. Key Responsibilities Install, assemble, align, and dismantle industrial machinery and mechanical systems Perform precision alignment of motors, pumps, gearboxes, conveyors, and rotating equipment Diagnose mechanical issues and perform corrective and preventive maintenance Read and interpret blueprints, schematics, and technical drawings Perform rigging, hoisting, and lifting operations using cranes, forklifts, and other equipment Measure, layout, and verify tolerances using precision tools (dial indicators, micrometers, laser alignment) Perform bearing installation, shaft alignment, and coupling installation Conduct equipment inspections and document maintenance activities Ensure compliance with OSHA regulations, company policies, and safety procedures Work collaboratively with electricians, welders, operators, and engineers Support equipment upgrades, outages, shutdowns, and turnarounds Maintain tools, equipment, and work areas in safe working condition

Job Responsibilities The Citadel, The Military College of South Carolina is seeking two Building/Grounds Specialist to work in the Grounds Department. These roles will assist with the maintenance of all of campus grounds as well as assisting with event set up on campus; the responsibilities will include the following: Perform grounds/landscape maintenance functions, such as mowing, weed eating, edging, blowing, raking, etc. using grounds related equipment. Perform furniture moves and replacements campus-wide and specific to campus barracks. Perform event set-ups for various large and small scale events, including Parades and weekend events. Not limited to six weekend events per year: Matriculation, Parents' Weekend, Homecoming, Accepted Student's Day, Corp Day and Commencement. Perform minor adjustments/repairs to grounds related equipment. Minimum Qualifications High School Diploma or GED equivalent required. Valid South Carolina Driver's license is required. Must have relevant experience in ground maintenance and operating grounds related equipment to include; weed eaters, mowers and blowers required. Must be able to follow written and oral instructions. Must be in good health with adequate strength and endurance to perform the required work. Be able to lift objects weighing in excess of 50 pounds and carry them a distance of 50 feet; must be able to work off of elevated platforms Must be able to work with minimum supervision. Must be able to communicate both orally and in writing. Some holiday and weekend work required. Must be able to work indoors and outdoors in temperature and humidity extremes including inclement weather. Operates vehicles, various lawn and grounds. Benefits of Working at The Citadel Extensive Health Plans Great Retirement Options Tuition Waiver Program Tuition Exchange Program Paid Parental Leave Employee Discounts Isle of Palms Beach Club Swain Family Boat Center Community Service Opportunities Read more about our benefits, on our HR website About The Citadel College The Citadel, also known as the Military College of South Carolina, is a public senior military college located in Charleston, South Carolina. Founded in 1842, The Citadel has a rich history and educational reputation. With our current location on the banks of the Ashley River in downtown Charleston, you are close to great restaurants, shopping and much more. Ranked #1 Public College in the South (U.S. News & World Report, 2022) for schools with up to a master's degree, the opportunities are endless. There are about 2,300 undergraduate students who make up the South Carolina Corps of Cadets. Out of the Corps of Cadets, 1 out of 3 graduates earn a military commission. Students can choose from 31 Majors, 57 Minors, pre-health professions, and pre-law (a concentration in political science). The 11:1 student-to-faculty ratio guarantees students a quality education. Another 1,000 students attend the Graduate College, evening and online programs.

This position typically provides the performance of moderate level skilled tasks in a moderately supervised to independent manner; and deals courteously and effectively with fellow employees and citizens. ESSENTIAL JOB FUNCTIONS: * Performs skilled tasks and troubleshoots and makes repairs in commercial and residential type buildings and grounds operated by Berkeley County Government according to standard practices of the trade. * Assists with general and preventative maintenance on HVAC & Mechanical type systems to include grounds equipment. * Performs moderate skilled maintenance duties in the carpentry trade including, but not limited to construction, renovations and remodeling in County facilities. * Performs other duties including grounds maintenance, assembly of office furniture and cabinetry and replacement of building hardware, such as locks, doors and windows. * Performs other duties such as installing and wiring fixtures, changing light bulbs and ballasts, reading electrical instruments, tracing wiring short circuits, pulling wiring through conduit and repairing defective or worn parts and equipment. * Assists with repairs and maintenance of all department trades as assigned. * Reads and interprets sketches, diagrams and blueprints. * Assists customers. * Performs other duties as assigned. * High School diploma or equivalent; * Six (6) months of related general experience in the electrical, plumbing, HVAC, painting, landscaping or carpentry trade areas; * Candidates with commercial experience preferred; * Must have and maintain a valid driver's license for South Carolina with safe driving record; Special Requirements: * This position requires "on-call" status on a rotating basis as well as after hours and weekends on an emergency basis. * Departmental testing may be administered during interview; * A criminal background check will be completed on selected applicant if a current one (less than 3 years old) is not on file. * This is a safety sensitive position and is subject to random drug and alcohol testing. Knowledge, Skills and Abilities: * Ability to read and write. * Ability to use small office equipment. * Ability to use or repair small and medium equipment and machinery. This position requires the employee to reach with hands and arms; stand; walk; use hands to handle, feel, grasp or operate objects, tools or controls; sit; climb or balance; stoop, kneel, crouch or crawl; use mental acuity; and talk and hear. The employee must frequently lift and/or move up to ninety-five (95) pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. The work is regularly performed in a dynamic environment that requires sensitivity to change and responsiveness to changing goals, priorities and needs. Thirty-seven and one half (37.5) hours per week. Normal work hours are 7:00 a.m. to 3:00 p.m. Monday through Friday with the ability to work after hours when necessary. Scheduled hours/days, job location, duties and any other information contained herein is subject to change. May be required to work extra hours and to perform extra or different duties during emergency situations.

Job DescriptionAre you seeking a challenging, rewarding, and well-compensated position at a leading international company? Diatom is a reference in Latin America for the production of silicates, synthetic silicas, and zeolites. Founded in 1956 in Argentina and Uruguay, it expanded to Brazil in 1985 and is now building a new manufacturing facility in Andrews, SC. We want to hear from you if you have a strong growth aptitude and enjoy a diverse and innovative environment, problem-solving, and working in a supportive team! We seek professionals with expertise in production, maintenance, furnace, administrative, and chemical laboratories. What We Offer Competitive Salary Medical Insurance ( Health, Dental & Vision) PTO and Holidays What you'll do Perform routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions. Inspect, operate, or test machinery or equipment to diagnose machine malfunctions. Adjust functional parts of devices or control instruments using hand tools, levels, plumb bobs, or straightedges. Repair machines, equipment, or structures, using tools such as hammers, hoists, saws, drills, wrenches, or equipment such as precision measuring instruments or electrical or electronic testing devices. Order parts, supplies, or equipment from catalogs or suppliers. Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary. Design new equipment to aid in the repair or maintenance of machines, mechanical equipment, or building structures. Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment. Clean or lubricate shafts, bearings, gears, or other parts of machinery. Estimate costs to repair machinery, equipment, or building structures. Align and balance new equipment after installation. Record type and cost of maintenance or repair work. Dismantle machines, equipment, or devices to access and remove defective parts, using hoists, cranes, hand tools, or power tools. Plan and lay out repair work, using diagrams, drawings, blueprints, maintenance manuals, or schematic diagrams. Any other activities as assigned by the manager What you bring Over 3 years of experience in Industrial Maintenance High school diploma or GED Proficient in English; speaking in Spanish is a plus Previous experience working in a manufacturing facility Excellent verbal and written communication skills. Ability to work independently Team player with the ability to interact effectively with all parts of the organization Ability to follow directions and adhere to company procedures and standards Dependability and accountability Powered by JazzHR 3yHMxUlIlx

NAMAN HOTELS owns and operates over twenty hotels, ranging from select service and full service, to extended stays. We build and manage only the best brands. We proudly fly Hilton, Hyatt, and Holiday Inn/IHG flags. We operate hotels throughout North and South Carolina. We also have several properties currently under construction, which will be opening in the near future. At NAMAN, we fly the best flags, build the best hotels and employ the best people. This simple, yet proven strategy has allowed us to deliver exceptional results to our stakeholders, investment partners, owners, associates, and most importantly; our GUESTS! The Maintenance Engineer will play a key role in overseeing, coordinating and assisting in the maintenance activities of the hotel. Ensures repair, preventative maintenance, and engineering activities are completed as directed, and also supports or monitors capital repair and renovation projects. Effectively and professionally communicates with co-workers, guests and management staff. Follows company policies and procedures. Ensures all fire and safety inspections are completed, and any discrepancies are corrected. Responsible for the safety of the department and building. Administers the preventative maintenance program as required. Completes training regarding safety, security, department procedures, and service guidelines. Conducts training of co-workers and subordinates as needed. Provides a professional image at all times through appearance and dress. Meets with vendors and suppliers to discuss the scope of, and products and materials used in, repair activities. Obtains pricing and bids, or develops cost estimates as directed. Must be available to drive to local stores, to pick up last minute supplies. Supervises and maintains and repairs fire and life safety systems, room equipment, HVAC, plumbing and electrical systems, kitchen appliances, refrigeration equipment, pool equipment, lighting, laundry equipment, and other systems/equipment as directed. Performs skilled repair and maintenance operations using power tools, hand tools, welding equipment, etc. Monitors tool inventories. Monitors supplies, budget expenditures and places orders with approved vendors as needed. Maintains working spaces in a safe and clean condition.

Why Work for Live Oak Memorial Gardens? Service At every level, our dedicated team members display a strong work ethic and commitment to our core values, respect for the family, the profession, and the individual. Work with leading experts in the funeral and cemetery profession. Benefits Financial assistant programs encouraging employees through education and development in industry related subjects. Robust Health and Welfare Plans, and savings account options, designed to support your personal needs, enhance well-being and help navigate life's challenges. Rich 401k and Roth Retirement Plan options available for both Full Time and Part Time employees along with a Company Match. Variety of Vacation, Personal Days and Sick Days based on your role emphasizing the importance of physical and emotional replenishment for our team. Employee Discounts on services, merchandise, and property to help our team members in their time of need. Culture We value honesty, courage, integrity, ethical behavior and the development of personal growth. We are rooted in the communities to provide a personal touch to every family we serve. We believe in the value of funeral and cemetery service, drawing on decades of experience to create the best experience for our families. Summary/Objective Perform all grounds keeping and maintenance matters on the properties and maintains the overall appearance of a cemetery, mausoleum or funeral home location. Essential Functions Performs tasks of grounds maintenance requiring the knowledge of use and general maintenance of mechanized equipment including lawn equipment i.e. weed eaters, walk behind mowers, hedge trimmers and edger, pruners, leaf vacuums/blowers. Performs set-up and completion of interments and entombments to include but not limited to excavating of the grave to the proper level, assist with the lifting and placing casket on lowering device, removing, replacing and lifting crypt and niche fronts. Correctly identifies and locates the location of specified interment/entombment spaces within the cemetery on cemetery maps. Performs other duties as assigned. Competencies Communication Proficiency. Teamwork Orientation. Detail Orientation. Customer Service Orientation. Time Management. Required Education, Experience, Certifications and Licensure High school diploma or equivalent combination of education, training and experience preferred. Minimum of 1-year grounds experience. Cemetery grounds experience is strongly preferred. Valid state issued driver's license in good standing and acceptable driving record. Additional Eligibility Qualifications Ability to operate large and medium scale equipment to include but not limited to riding mowers, backhoes, hi-lows, tractors, Kubota's riding machines, Gators, ditch diggers, power washers, golf carts, casket and granite power lifts, trucks and trucks with plows. Ability to read a cemetery map and correctly identify and locate the location of specified interment/entombment spaces within the cemetery. Ability to read, write and speak English. Bilingual is a plus. Strong communication and interpersonal skills. Requires the ability to show respect and sensitivity toward families while working in a physically demanding environment. Knowledge of use and general maintenance of mechanized equipment. Ability to apply proper precautions concerning lifting and equipment use in a safe and careful manner. Supervisory Responsibility This position has no direct supervisory responsibilities. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The duties associated with this position are generally performed in an outdoor setting. Outdoor duties may require exposure to natural elements such as inclement weather, extreme temperatures, uneven ground, dust, gas, and/or fumes. Equipment used to perform the essential function of this position includes, hand-held tools and equipment, including but not limited to shovels, picks, rakes, sledgehammers, lawn mowers, weed trimmers and sod cutters Employees in this role are regularly required to climb, sit, stand, bend, kneel, and frequently lift up to 75 pounds and may be required to lift up to 100 pounds. This position may also require reaching, pushing, and pulling. This position may also be exposed to chemicals and/ or blood borne pathogens. Exposure risk is considered: Low Overtime is sometimes necessary or required. Travel This position may require up to 10 percent out of area and overnight travel. Travel is primarily local occurring during the business day only. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Flotech is a subsidiary of FloWorks International LLC, which is a privately held company located in Pasadena, Texas. As a Valve Technician you are responsible for performing maintenance, assessment, repair and testing on various types of industrial valves. This position has no supervisory responsibilities. Some of the exciting things you will do in this role... Responsible for repair and testing of various valves, including but not limited to ball valves, gate valves, butterfly valves, safety relief valves, etc. Perform disassembly, cleaning, inspection, measuring, reassembly and testing of valves at Flotech facilities and client locations. Follow all schematics and documented procedures in accordance with all Quality Control and ASME National Board standards that apply to the job. Thoroughly complete all calibration and documentation associated with testing and repairs. Travel to job sites and adhere to all site safety and performance requirements. Communicate timely updates to management, co-workers and customers to ensure timely and successful completion of job responsibilities. Works closely with co-workers, management and safety coordinator to ensure compliance with OSHA and other safety regulations. Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly. A must... High School Diploma or GED and a minimum of 2 years industrial valve repair experience, or equivalent number of years of education and experience. Familiar with tools and machinery required to perform daily valve repair duties. Experience with repairing various valves and actuators, whether pneumatic, hydraulic or electric. Valid Driver's License. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Ability to add, subtract, multiply and divide all units of measure, using whole numbers, common fractions and decimals. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. The perks of working here.... Tuition Reimbursement! 401K + Match! Employee Referral Program: You get paid for referring top talent! FloWorks Cares Charity Program: Volunteer time off! Environmental Job Requirements... Frequent exposure to fumes or airborne particles. Frequent exposure to loud noises. Continually required to stand, walk, bend, crouch and climb. Continually required to use hands and fingers and reach with arms. Frequently required to lift up to 50 lbs. Continually required to talk or hear. Occasionally exposed to outdoor weather conditions (heat, cold, rain). Travel up to 75%. This information indicates the general nature and level of work performed by associates in this role. It is not designed to contain a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this role. This description supersedes any previous or undated descriptions for this role. Management retains the right to add or change the duties of the position at any time. Questions about the duties and responsibilities of this position should be directed to the reporting Manager or Human Resources. FloWorks is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or protected veteran status. FloWorks is committed to fostering a culture where every individual is valued and empowered to contribute to a shared success. FloWorks participates in the US Government's E-Verify program.

Maintenance Engineer Property: Live Oak, Charleston Historic District, a Tribute Portfolio Hotel Reports to: Chief Engineer Join the Legacy of Live Oak As we prepare to open the doors to Charleston's newest luxury destination, we are seeking an experienced and motivated Maintenance Engineer to join our team. Responsibilities Perform preventative maintenance assignments on a scheduled basis (e.g. "room care"). Complete work orders from guests and hotel associates and record in log Assist in checking electrical systems such as air conditioning controls, television sets, lighting systems, and make minor repairs and/or replacement. Make routine repairs on all hotel equipment including small appliances, kitchen equipment, laundry equipment, boilers, pool equipment, HVAC, hand and power tools and general plumbing systems such as pipelines, toilets and sinks Service the hotel's pool, including adjusting chemicals and cleaning filters Refurbish furniture and fixtures within guest rooms such as cabinets, tables, chairs, doors, windows, and counters. Paint and finish furniture and fixtures if needed. Respond in a courteous manner to all guest questions, complaints, and/or requests to ensure strong guest satisfaction. Perform any other job-related duties as assigned. Positions available for both morning (AM) and evening shifts (PM) Benefits Family Focused Culture Development and Promotion Opportunities Competitive Pay Health, Vision, Dental and Supplemental Insurance Paid Vacation and Holiday Pay 401k Uncapped Employee Referral Program

Job Description JOB SUMMARY: This is an entry-level, training maintenance position where the employee possesses fundamental mechanical knowledge to perform inside/outside routine maintenance or preventive maintenance for building(s), grounds, machines, and equipment that includes setup and adjustments for production runs and installation/repair of machines and equipment following standard operating and safety procedures. Employee may interact with vendors to obtain estimates and submits orders for repair parts and supplies as needed. Relocation reimbursement with temporary housing allowance included EDUCATIONAL/EXPERIENCE REQUIREMENTS: High School/GED Required Valid Driver's License Required One-to-Two (1-2) Years Maintenance-Related Experience Required Twenty-four to Thirty-Six (24-36) Months On-The-Job Training Required JOB QUALIFICATIONS: Possess dependability to be consistently at work and on time with ability to work 40+ flexible schedule as required Possess ability to read and comprehend written instruction; follow verbal directives; follow general and maintenance-specific safety procedures and guidelines Possess functional mathematical ability including knowledge of fractions and decimals to perform basic math calculations and measurement computing using tape measure and/or micrometers Possess functional mechanical knowledge with ability to develop good fabricating and trouble-shooting skills including pneumatic and hydraulic systems Possess working knowledge of operational functions for general maintenance equipment including cranes, forklifts, milling machines, lathes, welding and cutting equipment, and hand/power tools Possess basic computer skills Possess a “Team Member” mentality with a QA/safety oriented mindset when performing maintenance duties or operational instruction Possess self-motivational skills to perform duties without direct supervision with ability to multi-task and perform well under pressure Possess functional communication skills to interact with management, co-workers, and outside vendors Possess close visual acuity, near/far vision, and multiple limb coordination Possess manual dexterity and moderate/heavy (20-80 lbs) lifting capability while performing essential job duties Possess repetitive standing, walking, and/or bending capability during normal phase duties ESSENTIAL JOB DUTIES: Conduct a safety evaluation of work area prior to performing maintenance actions. Perform at a training-level capacity inside/outside, routine maintenance or preventive maintenance actions for building(s), grounds, machines, and equipment following standard operating and safety procedures. Maintenance actions include setup actions for product runs; troubleshooting, repairing, and installing machinery/equipment; calibrating and repairing pneumatic systems; inspection of belts, fluid levels, filters, bearings, seals, etc.; providing corrective actions as required. Perform at a training-level capacity inside/outside, minor/major emergency repairs as required for building(s), grounds, machines, and equipment following standard operating and safety procedures. Perform at a training-level capacity computerized control and monitoring of mechanical equipment. Perform housekeeping actions adhering to post maintenance/repair procedures. OTHER RESPONSIBILITIES: Obtain estimates and order supplies and/or replacement parts as needed from outside vendors via telephone or off-site meetings; drive to pick-up supplies/parts or attend off-site meetings as required. Travel to other plants to perform maintenance actions as required. Maintain scheduled maintenance procedures records for building(s), grounds, machines, or equipment by completing weekly and/or monthly checklists as required by ISO regulations. Perform any other general labor duties as directed by supervisory personnel to ensure efficient operation of facility. WORK ENVIRONMENT: Majority of work performance is conducted in a steel manufacturing plant environment using heavy production machinery, material handling and job-specific equipment and tools. Plant safety and machine-specific safety procedures are strictly enforced and compliant with Federal OSHA and/or State regulations. Safety training, written procedures, and continual improvement measures are implemented to eliminate or control any physical/environmental hazards that may be present in the workplace. Employee use of personal protective equipment is enforced for all phases of job performance to prevent bodily injury. PHYSICAL REQUIREMENTS: Job performance demands constant application of the following physical requirements: use of hands. Job performance demands frequent application of the following physical requirements: lifting (Avg. 20 lbs), walking, standing, bending, fine manipulation, close visual acuity, near/far vision, upper limb coordination, multiple limb coordination Job performance demands occasional application of the following physical requirements: lifting (Max. 80 lbs.), carrying, sitting, reaching, overhead reaching/lifting, pushing, pulling, squatting, kneeling, twisting, climbing, balancing, foot controls, driving, total visual field. Excellent benefits include medical with a standard PPO plan with deductibles as low as $1,500 and wellness credit up to $750; voluntary 401k plan deduction up to 12% with varying company match per quarter; voluntary dental and vision plans; telemedicine services; basic life and short term disability coverage.

Aufgaben Shape the future today. The world is changing. The question is, what will be our contribution to the outcome? We have set the pace in the field of mobility from the very beginning, and we will continue to do so. At Mercedes-Benz Vans, interdisciplinary teams are developing the mobility of tomorrow. Our goal is to make mobility safer, simpler, and more sustainable for people across the globe. Put your pioneering spirit to good use: This is your opportunity to make a contribution that extends far beyond your job title. At Mercedes-Benz Vans, we offer you the perfect environment for your professional and personal growth. Cutting-edge training and promising career opportunities will help you to foster and expand your professional skill set as well as your individual strengths. Think, try, and thrive with us in collaborative work environments that spark game-changing concepts. Job Overview: Monitors Department performance. Develops, implements, and improves the operation of equipment. Acts as interface between maintenance technicians and engineering to ensure the maintenance of equipment in production. Implement an established maintenance program and maintain detailed maintenance records. Responsibilities: * Collaborates and takes over responsibilities with other departments in preparing scope of work including project requirements, milestones, deliverables, end products, documents and reports that are expected to be provided by external providers. * Develops best practices to improve equipment capacity, quality and reliability * Develops operational strategies to achieve energy and financial objectives * Develops planning standards, methods, and procedures to maintain robust PM, TPM processes as well as robust containments and countermeasures for equipment downtime * Ensures equipment uptime, MTTR, MTBF, and OEE by relying on experience and judgment to plan and accomplish goals * Ensures that highly technical equipment meets required specifications and high quality standards * Evaluates current production activities and drives improvements * Investigates complex problems, analyzes root causes and derives resolutions. Will use 8D Problem Solving Process to ensure sustainable quality products. * May train and support less experienced engineers and team members. * Participates in budget preparation and monitor expenses and profitability * Participates in regularly scheduled team meetings * Proposes and manages medium-scale projects from beginning to end. May scope and manage large capital investment projects (>$5M) * Repair, adjust, and maintain production equipment, machinery, or instruments in cooperation with internal and external staff to ensure that it functions reliably and complies with process specifications. * Responsible for coordinating activities (PM's, TPM, problem solving) of third party contractors, vendors, or suppliers related to the maintenance field. * Stays current with product specifications, engineering technology and production processes * Will perform other duties as assigned Qualifikationen Qualifications: * Bachelor's Degree in Industrial, Manufacturing, Mechanical, Electronics, Electrical Engineering, or other relevant degree required. Equivalent experience may be substituted. Skills & Knowledge: * 5 years plus of relevant experience required, strongly preferring automotive environment including experience with: * PLC experience such as; Siemens S7 Tia portal * 3D-CAD experience such as; SolidWorks, Catia, Siemens NX, ect. * Hands-on experience pneumatic, hydraulic, electrical, and computer controlled systems * Hands-on experience with process devices such as; motor drives, sensors, AC/DC converters, lifts, conveyors, etc. * Experience with Paint applications(chemicals,sprays,filtration,pumps,degreaser,hydrocyclones, rectifier process, anodes, anolyte systems, ultra-filtration, DI-water, industrial paint oven curing) * Experience with joining technologies, clinching, gluing and fluid technology * SAPipro * Experience with project management * Experience with equipment installation * Knowledge of manufacturing methods/procedures and process technology * Ability to present complex technical information related to achieving goals of the department * Able to influence team members at all levels of the organization * Proven written and verbal communication at all levels within the organization with good negotiation skills * Able to anticipate needs and deliver timely, relevant solutions and actions * Proven design & implementation of Continuous Improvement themes with savings * Experience in process layout and optimization incorporating asset utilization is a plus * Ability to troubleshoot, instruct repair techniques, & assist if needed for root cause analysis in stressful situations * Ability to read & create blueprints and schematics * Able to perform the essential functions of the job. We are all in for change. Are you too? Apply now. If you have experience in the above and are interested in joining an outstanding company we welcome you to apply. The division Mercedes-Benz Vans is world renown for quality and innovative products. EXCELLENT COMPENSATION & BENEFITS PLAN WITH 401k MATCHING Mercedes-Benz Vans, LLC is committed to fostering an inclusive environment that appreciates and leverages the diversity of our team. We provide equal employment opportunity (EEO) to all qualified applicants and employees without regard to race, color, ethnicity, sex (including pregnancy, gender identity, and sexual orientation),age, national origin, religion, marital status, veteran status, physical or other disability, genetic information, or any other characteristic protected by federal, state or local law.

Property Description The Mills House offers an exciting opportunity for job applicants looking to be a part of a historic and prestigious hospitality team. Located in the heart of Charleston, South Carolina, our hotel boasts a rich heritage and timeless elegance, providing a unique and upscale experience for our guests. As a team member, you will have the chance to work in a dynamic and vibrant environment, providing exceptional service and creating memorable moments for our guests. With opportunities for career growth, ongoing training, and a supportive work culture, The Mills House is the perfect place to elevate your hospitality career. Join our team of dedicated professionals and contribute to the legacy of our iconic hotel in the charming city of Charleston. Apply now and take the next step in your hospitality journey with The Mills House! #MillsHouse #CharlestonJobs #HospitalityCareers #HotelJobs #TeamMillsHouse #SouthernHospitality Overview Looking for an exciting and rewarding career in maintenance engineering? Our hotel or resort is looking for an Entry Level Maintenance Engineer to join our team. As a Maintenance Engineer, you will play a vital role in ensuring our property remains in top condition for our guests. You will be responsible for performing routine maintenance and repair work, troubleshooting problems, and ensuring all equipment is operating safely and efficiently. If you have a passion for working with your hands, enjoy solving problems, and have a strong attention to detail, then this is the perfect opportunity for you! Apply today to join our team! Qualifications Basic knowledge of electrical, plumbing, and HVAC systems Strong problem-solving skills Ability to work independently and as part of a team Strong attention to detail Good communication skills Willingness to learn and take on new challenges Benefits Davidson Hospitality Group is an award-winning, full-service hospitality management company overseeing hotels, restaurants, dining and entertainment venues across the US. A trusted partner and preferred operator for Hilton, Hyatt, Kimpton, Marriott, and Margaritaville, Davidson offers a unique entrepreneurial management style and owners' mentality that provides the individualized personal service of a small company, enhanced by the breadth and depth of skill and experience of a larger company. In keeping with the company's heritage of delivering value, Davidson is comprised of four highly specialized operating verticals: Davidson Hotels, Pivot, Davidson Resorts and Davidson Restaurant Group. In keeping with the company's heritage of delivering value to its owners and team members, Davidson offers a rich benefit program with a variety of benefits designed to enrich the lives and well-being of our team members and their families. Multiple Tiers of Medical Coverage Dental & Vision Coverage 24/7 Teledoc service Free Maintenance Medications Pet Insurance Hotel Discounts Tuition Reimbursement Paid Time Off (vacation, sick, bereavement, and Holidays). 401K Match Working at Davidson is like nowhere else. It's less of a job, more of a calling. It's part career, part revolution. Because whatever you do here, you play a part in helping redefine the way quality hospitality is delivered to our guests, our clients, our partners, and each other. EOE AA- Minorities/Females/Vet/Disability/Gender Identity/Sexual Orientation Davidson Hospitality is a drug free workplace. Pre-employment drug test and background check required. We participate in E-Verify.

Hourly Pay up to $18/hr Technician Career Pathway through dealership provided training and advancement opportunities Paid Manufacture Training Hudson Nissan of Charleston, a Hudson Automotive Company, is actively seeking Automotive Express/Maintenance Technicians to join our award winning, high-volume service team. Hudson Automotive Group, founded in 1948, is a third-generation, family owned & operated business proudly serving customers with all their automotive needs. Hudson Automotive has grown from a single location in Providence, KY to a multistate, multi-franchise organization with over 50 dealerships and more than 4,000 employees throughout 8 States concentrated in the Southeast. Why choose Hudson Nissan of Charleston and Hudson Automotive Group? Accruable PTO that begins day 1 of hire Climate Controlled Facility Technician Career Pathway through dealership provided training and advancement opportunities Other Benefits we offer: Medical, Dental, Vision Insurance Life Insurance 401k with match Paid Vacation/Holidays Accrued PTO Employee development through training and advancement opportunities Employee discounts on products & services Balanced work schedule What are the responsibilities for an Express Automotive Technician with Hudson Automotive? Perform basic safety inspection while draining oil from crankcase and refill with required amount of oil. Perform work as outlined on repair orders with efficiency and accuracy, in accordance with dealership and factory standards. Replace air filters, cabin air filters, and wiper blades, additional services as outlined by management Inspect vehicle fluid levels, replace, or replenish as necessary. Check tire pressure and add air if needed. Qualifications: Valid Drivers License Previous express technician experience preferred Customer focused professional who is self-motivated, competitive and coachable. Are you ready to work in a rewarding, high-energy environment, and state-of-the-art facility? Come take the next step of your career with Hudson Automotive Group! We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. All applicants must be able to pass pre-employment testing to include background checks, MVR, drug test, and possess a valid driver's license. #T1

Your role: The Grounds Specialist maintains the physical aspects of the property, which include the grounds, common areas and amenities. This position will also assist the Maintenance Supervisor and Property Manager by performing general maintenance and repairs for the assigned property and facilities. What you will do: Walks the property throughout the day and removes litter, debris and pet droppings from all areas, including but not limited to, breezeways, pools, grounds, common areas, etc Removes trash and recyclables within the office and maintains the trash areas per the agreed upon schedule Checks and logs pool levels daily and vacuums pools weekly Cleans and assists with upkeep of the facilities by performing general labor duties Cleans and maintains grills inspecting timers and knobs to ensure safety What you will bring: One or more years of general labor job experience is preferred, multifamily experience is a plus High school diploma or equivalent, preferred Certified Pool Operator (CPO) certified is preferred Ability to use a variety of hand tools, cleaning supplies and other equipment needed for the role Excellent time management skills Effective verbal and written communication skills via all communication channels Ability to lift tools, equipment and other items in the unit (approximately 50 lbs) Work over 40 hours per week as business needs deem appropriate IND1 What we offer: Great benefits, including health insurance (medical, dental, and vision, behavioral health and more) on the first of the month following 30 days of employment 401(k) Savings Plan (4% employer match; 100% vested after 1 year of service) Company paid life insurance (1x base salary) Paid Time Off package with a carryover provision Training and career development opportunities Company Apparel Store allowance More information can be found on our Benefits page. Are you excited about this opportunity, but your experience does not align perfectly with every qualification in the job description? No problem! We encourage you to still apply, as you just might be the right candidate for this role or other positions. Who we are: Davis Development is a privately owned luxury apartment developer and property management company with 25+ years in the industry and a best-in-class reputation. We have developed and managed multi-family properties throughout the country. Part of our success is attributed to empowering our teams to manage their properties as owner-operators, entrusting them with making the best decisions for their teams and residents. It is this approach that keeps our family culture and a results-driven attitude. At Davis Development, you will find a sense of pride, commitment, and determination that allows every team member the opportunity to have a meaningful impact. We hope you come grow with us! Davis Development is an equal opportunity employer and proud to support diversity in the workplace. No calls or emails from third party recruiters at this time please.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. About the Job: The Plant Maintenance Technician is responsible for maintaining site reliability by performing high-quality inspections, troubleshooting basic preventative maintenance (PM) tasks, and executing routine maintenance with no supervision. This role includes replacing basic components and assisting in minimizing unplanned downtime through proactive maintenance efforts. What You'll Do: * Other Requirements: * Critical Competencies: * Repairing and Maintaining Mechanical Equipment: Ability to independently perform routine maintenance and component changes * Monitoring Processes, Materials, or Surroundings and Troubleshoot: Detail-oriented approach to inspections and identifying potential failures * Making Decisions and Solving Problems: Strong troubleshooting skills for basic mechanical and operational issues * Communication and Collaboration: Effective collaboration with team members to support plant operations * Evaluating Information to Determine Compliance with Standards: Dependable, safety-conscious, and able to work effectively within a team * Proactiveness: Proactive mindset in minimizing unplanned downtime and improving reliability Skills You Need: Education: * High School diploma or equivalent required. Experience: * Minimum of 1 year of experience in operations, preferably within the aggregate industry. Knowledge, Skills, and Abilities: * Strong understanding of plant operations and maintenance requirements * Proficiency in conducting thorough inspections of all site areas * Ability to troubleshoot and resolve basic PM and maintenance issues * Knowledge of component replacement and its impact on plant performance What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. The does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. The Company may at any time, in its sole discretion, modify or vary from anything stated in this job description, with or without notice.

Plant Maintenance Technician - 26000031 Description Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. About the Job:The Plant Maintenance Technician is responsible for maintaining site reliability by performing high-quality inspections, troubleshooting basic preventative maintenance (PM) tasks, and executing routine maintenance with no supervision. This role includes replacing basic components and assisting in minimizing unplanned downtime through proactive maintenance efforts. What You'll Do: Other Requirements: Critical Competencies:Repairing and Maintaining Mechanical Equipment: Ability to independently perform routine maintenance and component changes Monitoring Processes, Materials, or Surroundings and Troubleshoot: Detail-oriented approach to inspections and identifying potential failures Making Decisions and Solving Problems: Strong troubleshooting skills for basic mechanical and operational issues Communication and Collaboration: Effective collaboration with team members to support plant operations Evaluating Information to Determine Compliance with Standards: Dependable, safety-conscious, and able to work effectively within a team Proactiveness: Proactive mindset in minimizing unplanned downtime and improving reliability Qualifications Skills You Need:Education:High School diploma or equivalent required. Experience:Minimum of 1 year of experience in operations, preferably within the aggregate industry. Knowledge, Skills, and Abilities:Strong understanding of plant operations and maintenance requirements Proficiency in conducting thorough inspections of all site areas Ability to troubleshoot and resolve basic PM and maintenance issues Knowledge of component replacement and its impact on plant performance What You'll Like About Us:Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. The does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. The Company may at any time, in its sole discretion, modify or vary from anything stated in this job description, with or without notice. Job: Facility Maintenance Primary Location: South Carolina-Eutawville Organization: GM - SC Schedule: Full-time Job Posting: Jan 9, 2026, 7:41:48 PM

Flotech is a subsidiary of FloWorks International LLC, which is a privately held company located in Pasadena, Texas. As a Valve Technician you are responsible for performing maintenance, assessment, repair and testing on various types of industrial valves. This position has no supervisory responsibilities. Some of the exciting things you will do in this role... * Responsible for repair and testing of various valves, including but not limited to ball valves, gate valves, butterfly valves, safety relief valves, etc. * Perform disassembly, cleaning, inspection, measuring, reassembly and testing of valves at Flotech facilities and client locations. * Follow all schematics and documented procedures in accordance with all Quality Control and ASME National Board standards that apply to the job. * Thoroughly complete all calibration and documentation associated with testing and repairs. * Travel to job sites and adhere to all site safety and performance requirements. * Communicate timely updates to management, co-workers and customers to ensure timely and successful completion of job responsibilities. * Works closely with co-workers, management and safety coordinator to ensure compliance with OSHA and other safety regulations. * Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. * Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. * Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. * Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. * Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly. A must... * High School Diploma or GED and a minimum of 2 years industrial valve repair experience, or equivalent number of years of education and experience. * Familiar with tools and machinery required to perform daily valve repair duties. * Experience with repairing various valves and actuators, whether pneumatic, hydraulic or electric. * Valid Driver's License. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. * Ability to add, subtract, multiply and divide all units of measure, using whole numbers, common fractions and decimals. * Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. The perks of working here.... * Tuition Reimbursement! * 401K + Match! * Employee Referral Program: You get paid for referring top talent! * FloWorks Cares Charity Program: Volunteer time off! Environmental Job Requirements... * Frequent exposure to fumes or airborne particles. * Frequent exposure to loud noises. * Continually required to stand, walk, bend, crouch and climb. * Continually required to use hands and fingers and reach with arms. * Frequently required to lift up to 50 lbs. * Continually required to talk or hear. * Occasionally exposed to outdoor weather conditions (heat, cold, rain). * Travel up to 75%. This information indicates the general nature and level of work performed by associates in this role. It is not designed to contain a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this role. This description supersedes any previous or undated descriptions for this role. Management retains the right to add or change the duties of the position at any time. Questions about the duties and responsibilities of this position should be directed to the reporting Manager or Human Resources. FloWorks is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or protected veteran status. FloWorks is committed to fostering a culture where every individual is valued and empowered to contribute to a shared success. FloWorks participates in the US Government's E-Verify program.