Manual lathe machinist jobs near me - 252 jobs

We are sourcing this position on behalf of our client. The CNC Operator will be responsible for setting up, operating, and maintaining CNC (Computer Numerical Control) machines to produce precision parts and components according to specifications. The ideal candidate will have strong attention to detail, mechanical aptitude, and a commitment to quality and safety standards. Key Responsibilities: Set up and operate CNC machines to produce parts according to blueprints and technical drawings. Perform machine adjustments and tool changes as needed to maintain accuracy and efficiency. Inspect finished products for quality and adherence to specifications using measuring tools (calipers, micrometers, gauges). Monitor machine performance and troubleshoot issues to minimize downtime. Maintain accurate production records and documentation. Follow all safety protocols and company procedures. Perform routine maintenance and cleaning of machines. Collaborate with team members and supervisors to meet production goals. Qualifications: High school diploma or equivalent; technical training in CNC machining preferred. Previous experience operating CNC machines in a manufacturing environment. Ability to read and interpret blueprints and technical drawings. Proficiency with measuring tools and quality inspection processes. Strong mechanical aptitude and problem-solving skills. Ability to work independently and as part of a team. Willingness to work in a fast-paced environment and meet deadlines.

Job Title: Manual Lathe Machinist Department: Repair Reports To: Plant Manager FLSA Status: Non-Exempt The Manual Lathe Machinist is responsible for machining precision parts used in the manufacturing and repair of hydraulic and pneumatic cylinders. This role involves setting up and operating manual lathes and related machine tools to produce components according to specifications, drawings, and work instructions. The machinist will calculate dimensions and tolerances, perform in-process inspections, and verify conformance of parts to quality standards. In addition to producing accurate parts, the Manual Lathe Machinist is responsible for maintaining equipment through preventive maintenance, monitoring tooling condition, and ensuring proper oil levels. Success in this position requires strong mechanical aptitude, attention to detail, and a commitment to producing high-quality components in a safe and efficient manner. Essential Duties: (Additional may be assigned as required.) Set up and operate manual lathes to machine cylinder components according to blueprints, specifications, and work instructions. Calculate dimensions, tolerances, and machining parameters using mathematics, precision measuring instruments, and technical knowledge. Machine parts to exact specifications using a variety of machine tools, including lathes, milling machines, shapers, and grinders. Measure, examine, and test completed parts to ensure conformance to specifications, using calipers, micrometers, gauges, and other precision tools. Perform in-process inspections during machining to verify accuracy, detect defects, and maintain consistent quality. Complete preventive maintenance on machines, including monitoring and maintaining proper oil levels and lubrication schedules. Inspect tooling regularly for wear and damage; replace or report issues to maintain safe and efficient machining. Maintain clean and organized work area to support safety, efficiency, and quality standards. Adhere to company safety policies and procedures, reporting any hazards or equipment malfunctions to supervisors. Collaborate with team members and supervisors to meet production schedules and achieve company goals. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Math Ability: Ability to add, subtract, multiply, and divide in all units of measure, including whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentage and to draw and interpret bar graphs. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Education/Experience: High school diploma or general education degree (GED); or one to five years of experience in a job-shop environment; or equivalent combination of education and experience. Equipment: Manual engine lathe Bridgeport mill Radial arm drills Knowledge, Skills, and Other Abilities: Ability to read blueprints. Ability to use all types of micrometers, close tolerances, and surface finishes. Ability to handle all types and sizes of tie rods, tubes, and rods. Familiarity with 3 and 4 jaw chucks Familiarity with OD and ID threading Familiarity with machining cold rolled steel, bronze, cast iron, aluminum, and some heat-treated materials. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, use hands, reach with hands and arms, and talk or hear. The employee is occasionally required to sit, climb or balance, and stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move up to 25+ pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to wear safety glasses and hard sole/close toed shoes with a low heel when walking through the manufacturing shop and/or repair shop whether as part of performing their job or just passing through. In addition, long hair must be tied back when around hazards of flame, machinery, or equipment. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and vibration. The noise level in the work environment is usually loud. Yates Industries, Inc. is an equal employment opportunity employer and provides employment and advancement opportunities to its employees without discrimination because of race, color, religion, sex (including pregnancy and conditions related to pregnancy), sexual orientation, transgender status, weight, height, age, marital status, national origin, citizenship, disability, genetic makeup, military or veteran status, misdemeanor arrest record (not resulting in conviction) or any other protected characteristic as established by law. This policy of equal employment opportunity applies to all policies and procedures relating to recruitment and hiring, compensation, employee benefits, promotional opportunities, disciplinary decisions, termination and all other terms and conditions of employment.

Company Overview KYOCERA SENCO Industrial Tools, Inc. is a trusted leader in designing and manufacturing industrial tools and fastening solutions. With nearly a century of excellence, we are committed to innovation, quality, and the growth of our team members. Our culture fosters a collaborative environment where every employee plays a vital role in our success, and we take pride in maintaining a strong work-life balance. We are seeking an experienced Machinist with full-scope manual milling, manual lathe, and surface grinding experience to join our Special Equipment team in Cincinnati, OH. This role requires the ability to take projects from start to finish-including setup, operation, precision machining, and finishing-on manual machines.While CNC machining experience is a strong plus, this position offers a clear growth path into CNC programming and operation as you master new equipment .If you take pride in craftsmanship, precision, and problem-solving, and want to grow into advanced machining technologies, we encourage you to apply today. Location 8450 Broadwell Rd., Cincinnati, OH 45244 Schedule 1st Shift; Monday-Friday, 6:00/7:00 AM - 2:30/3:30 PM Primary Responsibilities Perform full-scope machining on manual mills and lathes, including setup, operation, and finishing. Interpret complex tooling and part drawings accurately. Apply advanced shop mathematics (algebra, geometry, trigonometry) to calculate dimensions, speeds, and feeds. Devise and fabricate holding fixtures as needed. Shape and sharpen cutting tools for optimal performance. Work to extremely tight tolerances (.0002) and ensure quality standards are met. Document activities through reports, sketches, and technical notes. Collaborate with team members to troubleshoot and resolve technical tooling challenges. Qualifications Minimum 3-5 years of recent experience in manual milling and lathe machining (full-scope). Ability to interpret complex drawings and apply GD&T principles. Strong knowledge of cutter geometry, feeds, speeds, and material characteristics. Proficiency in surface plate inspection and precision measurement tools. CNC machining experience is a plus and offers growth opportunities. Preferred experience with CAD software for design and documentation. Requirements Ability to work independently with minimal supervision. Must furnish own set of standard hand tools. Comfortable working in a non-temperature-controlled environment and standing for prolonged periods. Ability to lift up to 75 lbs and perform physical tasks such as bending, stooping, and carrying. Commitment to safety protocols, including lockout/tagout procedures. Compensation & Benefits Competitive starting salary with opportunities for advancement. Medical, dental, and vision insurance. 401(k) with company match and immediate vesting. Paid time off granted weekly. 9-11 paid holidays annually. Tuition reimbursement for continuing education. Employee tool purchase program with discounts on SENCO products. Why Join Us? As a SENCO Machinist, t his role is not just a job-it's a career path. You'll start with manual machining and surface grinding, then advance into CNC machining and programming as you learn new technologies. Our team members enjoy a supportive and dynamic work environment where continuous learning and professional growth are encouraged. Join us to become a part of a company that values innovation, quality, and employee well-being. For additional information about KYOCERA SENCO Industrial Tools Inc., please visit our web site at ************* . KYOCERA SENCO Industrial Tools is proud to be an equal opportunity employer committed to fostering a diverse, inclusive, and respectful workplace. We strictly prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, age, veteran status, or any other protected characteristic as defined by applicable federal, state, or local laws. This commitment applies to every aspect of employment at KYOCERA SENCO-including recruitment, hiring, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. All employment decisions are made based on qualifications, merit, and business needs. To learn more, please review our full EEO Policy.

KYOCERA SENCO Industrial Tools, Inc. is a trusted leader in designing and manufacturing industrial tools and fastening solutions. With nearly a century of excellence, we are committed to innovation, quality, and the growth of our team members. Our culture fosters a collaborative environment where every employee plays a vital role in our success, and we take pride in maintaining a strong work-life balance. Position Summary We are seeking an experienced Machinist with full-scope manual milling, manual lathe, and surface grinding experience to join our Special Equipment team in Cincinnati, OH. This role requires the ability to take projects from start to finish-including setup, operation, precision machining, and finishing-on manual machines. While CNC machining experience is a strong plus, this position offers a clear growth path into CNC programming and operation as you master new equipment. If you take pride in craftsmanship, precision, and problem-solving, and want to grow into advanced machining technologies, we encourage you to apply today. Location 8450 Broadwell Rd., Cincinnati, OH 45244 Schedule 1st Shift; Monday-Friday, 6:00/7:00 AM - 2:30/3:30 PM Primary Responsibilities Perform full-scope machining on manual mills and lathes, including setup, operation, and finishing. Interpret complex tooling and part drawings accurately. Apply advanced shop mathematics (algebra, geometry, trigonometry) to calculate dimensions, speeds, and feeds. Devise and fabricate holding fixtures as needed. Shape and sharpen cutting tools for optimal performance. Work to extremely tight tolerances (.0002) and ensure quality standards are met. Document activities through reports, sketches, and technical notes. Collaborate with team members to troubleshoot and resolve technical tooling challenges. Qualifications Minimum 3-5 years of recent experience in manual milling and lathe machining (full-scope). Ability to interpret complex drawings and apply GD&T principles. Strong knowledge of cutter geometry, feeds, speeds, and material characteristics. Proficiency in surface plate inspection and precision measurement tools. CNC machining experience is a plus and offers growth opportunities. Preferred experience with CAD software for design and documentation. Requirements Ability to work independently with minimal supervision. Must furnish own set of standard hand tools. Comfortable working in a non-temperature-controlled environment and standing for prolonged periods. Ability to lift up to 75 lbs and perform physical tasks such as bending, stooping, and carrying. Commitment to safety protocols, including lockout/tagout procedures. Compensation & Benefits Competitive starting salary with opportunities for advancement. Medical, dental, and vision insurance. 401(k) with company match and immediate vesting. Paid time off granted weekly. 9-11 paid holidays annually. Tuition reimbursement for continuing education. Employee tool purchase program with discounts on SENCO products. Why Join Us? As a SENCO Machinist, this role is not just a job-it's a career path. You'll start with manual machining and surface grinding, then advance into CNC machining and programming as you learn new technologies. Our team members enjoy a supportive and dynamic work environment where continuous learning and professional growth are encouraged. Join us to become a part of a company that values innovation, quality, and employee well-being. For additional information about KYOCERA SENCO Industrial Tools Inc., please visit our web site at ************** KYOCERA SENCO Industrial Tools is proud to be an equal opportunity employer committed to fostering a diverse, inclusive, and respectful workplace. We strictly prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, age, veteran status, or any other protected characteristic as defined by applicable federal, state, or local laws. This commitment applies to every aspect of employment at KYOCERA SENCO-including recruitment, hiring, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. All employment decisions are made based on qualifications, merit, and business needs. To learn more, please review our full EEO Policy.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Aeronautics Systems (NGAS) has an opening for a Machinist Level 2 or 3. This position will be supporting our Beavercreek, OH and Kettering, OH facilities and requires onsite presence due to the nature of the role. We are a world-class manufacturer of composite structures, radomes, and antenna systems for military applications. The Machinist 2 or 3 will be responsible for setting up and operating 3 and 5 Axis Milling Machines. This is a great opportunity for an experienced CNC Machinist who desires exciting and challenging work to join our team! Essential Duties / Responsibilities: Able to set up and operate a variety of machine tools including but not limited to milling machines, lathes, and able to align and fasten work using tooling fixtures. Able to use & understand tool sharpeners, tool tolerances, dimensions, calibrated measurements, setup sheets, callouts, probes, feeds & speeds, and standard specs. Able to use a variety of machinist hand tools and precision measuring instruments to make standard shop computations relating to dimensions of work. Plan machining by studying work orders, blueprints, engineering plans, materials, specifications, and machining parameters; interpreting geometric dimensions and tolerances (GD&T). Perform computations relating to dimensions of work, tooling, feeds, and speeds. Program and edit G-Code and conversational. Implement lean initiatives by identifying and providing suggestions on areas for improvement. Performs all manufacturing operations safely, with quality in mind, and with customer delivery expectations met. Able to learn and perform other job functions with OJT when required. This would include but is not limited to performing program verifications, recipe verifications, rework, data collection & recording, and part processing & handling work among other duties. The ideal candidate will be able to work under minimal supervision, be a quick learner, and a team player. And have high integrity and understand the importance of escalating errors to their supervisor immediately. *This position requires the ability to work a WEEKEND DAY shift schedule from 6:00am - 6:30pm Friday - Sunday. This role can be filled at a Manufacturing Technician Level 1 or Manufacturing Technician Level 2 depending on the qualifications below. Basic Qualifications for Level 2: High school diploma or equivalent/GED and 2 years of additional education and/or related experience Experience running machines and setup Experience on 3 Axis CNC machines Must be able to obtain and maintain a DoD Secret Security Clearance Preferred Qualifications: 2 years of experience with 5 Axis CNC vertical machining centers. Active Secret DoD Security Clearance Associates degree or Trade School certification Experience with composite, honeycomb, and aluminum materials Basic Qualifications for Level 3: High school diploma or equivalent/GED and 4 years of additional education and/or related experience Experience running machines and setup Experience on 3 Axis CNC machines Must be able to obtain and maintain a DoD Secret Security Clearance Preferred Qualifications: 4 years of experience with 5 Axis CNC vertical machining centers. Active Secret DoD Security Clearance Associates degree or Trade School certification Primary Level Salary Range: $44,200.00 - $73,600.00Secondary Level Salary Range: $52,500.00 - $87,500.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

**Description:** Performs a variety of operations to manufacture and fabricate sheet metal and extrusion parts\. Sets\-up and operates one or more of the following varieties of machine tools: CNC mills, shears, brake press, routers, drill press, saws, roll formers, water jets, shapers, NC punch, stack routers, punch press, hydro press, and hand formers\. Displays ability to plan, layout, interpret blueprints, sketches to all engineering specifications; determine sequence of operations, number of required cuts and method of setup\. Uses a variety of hand tools and precision measuring instruments\. Makes standard shop calculations relating to dimensions of work tooling, feeds and speeds\. May monitor and verify quality with statistical process or other control procedures\. Performs other duties as assigned **Basic Qualifications:** - Experience with CNC mills, routers, brake and/or roll press\. - Experience with drilling, routing, and sawing\. - Experience with reading and fabricating blueprint specifications\. **Desired Skills:** : Performs a variety of operations to manufacture and fabricate sheet metal and extrusion parts\. Sets\-up and operates one or more of the following varieties of machine tools: CNC mills, shears, brake press, routers, drill press, saws, roll formers, water jets, shapers, NC punch, stack routers, punch press, hydro press, and hand formers\. Displays ability to plan, layout, interpret blueprints, sketches to all engineering specifications; determine sequence of operations, number of required cuts and method of setup\. Uses a variety of hand tools and precision measuring instruments\. Makes standard shop calculations relating to dimensions of work tooling, feeds and speeds\. May monitor and verify quality with statistical process or other control procedures\. Performs other duties as assigned Basic qualifications \(BQs\) are the minimum requirements for a candidate to be considered for a position, 3 to 5 BQs are most effective\. For additional Hiring Manager Training Resources, Learn more about basic qualifications here\. Basic Qualifications : - Experience with CNC mills, routers, brake and/or roll press\. - Experience with drilling, routing, and sawing\. - Experience with reading and fabricating blueprint specifications\. Desired skills are additional skills that are nice to have and help narrow down a qualified candidate pool\. Learn more about desired skills here\. Desired skills : Provide detail that is relevant to job seekers and will provide an overview of the most important aspects of the job\. This section is visible to Job seekers\. Learn more about s here\. Job Description : Performs a variety of operations to manufacture and fabricate sheet metal and extrusion parts\. Sets\-up and operates one or more of the following varieties of machine tools: CNC mills, shears, brake press, routers, drill press, saws, roll formers, water jets, shapers, NC punch, stack routers, punch press, hydro press, and hand formers\. Displays ability to plan, layout, interpret blueprints, sketches to all engineering specifications; determine sequence of operations, number of required cuts and method of setup\. Uses a variety of hand tools and precision measuring instruments\. Makes standard shop calculations relating to dimensions of work tooling, feeds and speeds\. May monitor and verify quality with statistical process or other control procedures\. Performs other duties as assigned Basic qualifications \(BQs\) are the minimum requirements for a candidate to be considered for a position, 3 to 5 BQs are most effective\. For additional Hiring Manager Training Resources, Learn more about basic qualifications here\. Basic Qualifications : - Experience with CNC mills, routers, brake and/or roll press\. - Experience with drilling, routing, and sawing\. - Experience with reading and fabricating blueprint specifications\. Desired skills are additional skills that are nice to have and help narrow down a qualified candidate pool\. Learn more about desired skills here\. Desired skills : - 3\+ years in metal fabrication\. - Demonstrated competency in use of computers and other system to access, maintain, and manipulate data\. - Ability to work well in a team environment as well as be a self\-starter\. - Attention to detail\. - Focus on cost, quality, schedule, and safety\. **Clearance Level:** None **Other Important Information You Should Know** **Expression of Interest:** By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match\. Should this match be identified you may be contacted for this and future openings\. **Ability to Work Remotely:** Onsite Full\-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility\. **Work Schedules:** Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees\. Schedules range from standard 40 hours over a five day work week while others may be condensed\. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits\. **Lockheed Martin is an equal opportunity employer\. Qualified candidates will be considered without regard to legally protected characteristics\.** **The application window will close in 90 days; applicants are encouraged to apply within 5 \- 30 days of the requisition posting date in order to receive optimal consideration\.** At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges\. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work\. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility\. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work\. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility\. If this sounds like a culture you connect with, you're invited to apply for this role\. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs , and apply for roles that align with your qualifications\. **Experience Level:** Hourly/Non\-Exempt **Business Unit:** AERONAUTICS COMPANY **Relocation Available:** No **Career Area:** Manufacturing **Type:** Full\-Time **Shift:** First

At DuPont, our purpose is to empower the world with essential innovations to thrive. We work on things that matter. Whether it's providing clean water to more than a billion people on the planet, producing materials that are essential in everyday technology devices from smartphones to electric vehicles, or protecting workers around the world. Discover the many reasons the world's most talented people are choosing to work at DuPont. Why Join Us | DuPont Careers (******************************************* DuPont is seeking a Machinist for our Valley View, OH site! . We're offering a $500 sign-on bonus and a $500 bonus after 90 days for this position! DuPont offers an excellent benefits package that includes a generous 401k match, health and dental insurance, 15 days of vacation, a variable bonus plan, and much more! The site is in Valley View, Ohio south of Cleveland. near Interstate 77, Interstate 480, and the Ohio Turnpike The facility employs about 135 people and manufactures compression molded, close tolerance-machined composite parts for major aerospace, commercial, and military aircraft engine manufacturers worldwide. To perform this job successfully, the individual must be flexible, adaptable, dependable, reliable, and able to adjust to various challenges (such as changes to schedule, work environment, materials, and tooling). Machinists must possess solid communication skills (i.e., oral, written, and listening) be detailed oriented, and have good organizational skills. Associates must be self-motivated, and able to work independently or in a group environment. **Responsibilities include, but are not limited to:** + Set up and operate, in an efficient timely manner, a wide range of machine tools, both CNC and manual such as grinders, mills, lathes, and hones on a diverse range of products involving difficult operations, aerospace tolerances, and complex shapes. Machines used at Valley View include HAAS vertical mills, Toyoda Grinders, Accuturn, Prodigy, Hardinge, and HAAS lathes. + Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines. + Work from and read blueprints as well as setting and checking work to various quality control gages. + Monitor product quality and troubleshoot to determine causes of operating errors and make decisions to solve any errors. + Confer with engineering, supervisory, or manufacturing personnel to exchange technical information. + Understand written instructions and be willing and able to communicate those instructions to others + Read process instructions and drawings and recognize/attend to details + Participate in customer audits and complete the Certified Operator Program (COP), DVV's intensive, skills-based validation and training program. + Audit processes to ensure compliance with quality practices and work instructions throughout the facility + Monitor production processes and control product processes, obtaining samples, and loading products. + Operate mobile transport equipment. + Facilitate corrective and preventive action related to supplier quality problems and source inspection issues. In the process, machining associates will issue stop tags/hold tags where conditions warrant. + Maintain quality metrics to facilitate positive, proactive operational change, Associates may be required to analyze non-conformance data, escapes, and other sources of data as well as identify continuous improvement opportunities that help drive the DVV Continuous Improvement plan, when appropriate. **The following are required:** + High School Diploma/GED (required) + 2+ years of machining experience OR a Machining Technology Certificate (required) + Willing and able to work any shift based on the specific site requirements + Willing and able to work overtime (including weekends, evenings, and holidays) as needed + Knowledge of basic math + Experience in machining composites, metals, and or aluminum extrusions + Ability to read CNC programs + Demonstrated ability to set up and operate manual and CNC equipment + Proficient in shop math, including geometry and conversions + Demonstrated ability to read blueprints and understand tolerance + Demonstrated ability to use precision gages + Knowledge of FANUC controls + Excellent problem-solving/troubleshooting skills + Excellent oral and written communication skills **The following are preferred:** + 3+ years of machining experience + CNC machinist certification + Knowledge/experience in Statistical Process Control Join our Talent Community (**************************************************** to stay connected with us! DuPont is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information (****************************************************** . DuPont offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page (********************************************************** .

Changing lives. Building Careers. Joining us is a chance to do important work that creates change and shapes the future of healthcare. Thinking differently is what we do best. To us, change equals opportunity. Every day, our colleagues are challenging what's possible and making headway to innovate new treatment pathways to advance patient outcomes and set new standards of care. Performs all phases of machining, finishing and assembly in a job shop or high-volume applications. Processes components to meet print and or geometric tolerance requirements. Responsible for the setup, operation and maintenance of production machinery, maintenance of proper documentation and support of the manufacturing engineering function. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Primary responsibilities are to: Performs programming. Performs set up of manual and CNC machines including loading of tools, troubleshooting, programming adjustments and tear-down. With limited supervision, completes tasks as directed by SOPs, routers, prints, work instructions and manufacturing schedules. Operates machining equipment with an understanding of machining and metal removal concepts which may include milling, turning, grinding and other methods. Observes operation of machine and verifies conformance of machined work pieces to specifications using measuring instruments such as fixed gauges, calipers and micrometers. Adheres to dimensions and tolerances found on prints. May use prints and sketches to determine proper methods and processes. Performs machine set up. Demonstrates a high degree of proficiency in the selection and care of special machine tools such as drills, jigs, mills, lathes and fixtures. Diagnoses machine problems using proper diagnostic tools. Maintains CNC program files. Maintains machine maintenance files. Reworks productions part and perform emergency rework and/or modification of production parts as directed. Modifies existing processes if necessary. Inspects prototypes, machines prototype fixtures and First Article components. Performs in-process checks using measuring devices and reports defective materials or questionable conditions to the department lead person or supervisor. Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. Trains other employees. Works on projects as part of a team, exchanging ideas and contributing skills that complement those of the other team members. Fulfills commitments to team members. Performs assembly, deburring and other duties as required. Note: Other duties may be assigned as necessary. QUALIFICATIONS The requirements listed below are representative of the knowledge, skill and/or ability required for this position. High School diploma or equivalent. 5+ years of related experience with trade school certification preferred where applicable. Considerable knowledge of the machinist role and complete acquaintance with an understanding of the machining of routine parts and ability to practically apply solutions to routine problems. Understanding of FDA device manufacturing requirements. Salary Pay Range: $25.96 - $35.58 USD Hourly Our salary ranges are determined by role, level, and location. Individual pay is determined by several factors including job-related skills, experience, and relevant education or training. In addition to base pay, employees may be eligible for bonus, commission, equity or other variable compensation. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. Additional Description for Pay Transparency: Subject to the terms of their respective plans, employees and/or eligible dependents are eligible to participate in the following Company sponsored employee benefit programs: medical, dental, vision, life insurance, short- and long-term disability, business accident insurance, and group legal insurance, and savings plan (401(k)). Subject to the terms of their respective policies and date of hire, Employees are eligible for the following ******************************************* Integra LifeSciences is an equal opportunity employer, and is committed to providing equal employment opportunities to all qualified applicants and employees regardless of race, marital status, color, religion, sex, age, national origin, sexual orientation, physical or mental disability, or protected veteran status. This site is governed solely by applicable U.S. laws and governmental regulations. If you'd like more information on your rights under the law, please see the following notices: EEO Is the Law | EOE including Disability/Protected Veterans Integra LifeSciences is committed to provide qualified applicants and employees who are disabled veterans or individuals with disabilities with needed reasonable accommodations in accordance with the ADA. If you have difficulty using our online system due to a disability and need an accommodation, please email us at ***********************. Unsolicited Agency Submission Integra LifeSciences does not accept unsolicited assistance from search firms for employment opportunities. All CVs/resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral where no pre-existing agreement is in place. A formal written agreement is required before engaging any agency, and it must be executed and authorized by the Vice President, Talent Acquisition. Where agency agreements are in place, introductions (the initial sharing of a candidate's name, resume, or background) are position-specific and may only occur within the scope of that approved agreement. Please, no phone calls or emails. Integra - Employer Branding from Integra LifeSciences on Vimeo

←Back to all jobs at ETI GLOBAL Manual Machinist ETI GLOBAL is an EEO Employer - M/F/Disability/Protected Veteran Status ETI, Inc. is an independent heavy equipment/parts dealer, that is looking for a Manual Machinist This position gives the chosen individual a great opportunity to learn and expand with a growing company. ETI offers competitive pay and benefits package. We are looking for an experienced manual machinist for a hydraulic repair facility. We work mainly on repairing hydraulic cylinders for Construction heavy equipment but are not limited to it solely. Must be a motivated individual to help grow our team and business further, with an emphasis on quality, speed, and proficiency. Responsibilities: · Operate, maintain, and clean machines · Duplicate or reproduce damaged parts · Cut-off or remove parts of damaged cylinders to be reused · Modify or improve existing parts · Maintain a clean and safe workstation Experience/Qualifications/Skills: · Must have previous experience running full manual lathe and mill · Good problem solving skills · Must be Reliable, Prompt, and have sense of urgency. · Good mechanical Skills, ability to use hand and power tools · Must be able to move large & heavy components. · Previous Hydraulic repair experience a plus · Welding experience preferred- TIG, MIG, and FCAW Must have a Valid Drivers License M-F 8-5:30 Business hours with frequent opportunities for overtime Occasional Saturdays when workload requires Health, Dental, Vision, PTO, Holiday, and 401K all available. Please provide a resume with references and applicable experience. Pay DOE ' Work Location: One location Work Remotely No Job Type: Full-time Salary: $25.00 per hour Benefits: 401(k) Dental insurance Flexible schedule Health insurance Life insurance Paid time off Vision insurance Schedule: 8 hour shift Please visit our careers page to see more job opportunities.

At JBT Corporation, what we do matters, we know that the contribution of our employees leads to the success of our business. Our purpose is to fortify the future of food; this guides our vision of being the global leader in food and beverage technology, by harnessing the full power of JBT to partner with our customers and pioneer sustainable innovation. Our values show who we are at our best. As we Serve with Integrity - Collaborate with Humility - Grow with Agility - Innovate with Impact. As our Machinist TEMP - you will report to the Production Supervisor. On a given day, you may: * Cut away material from a solid block of metal, plastic, glass, or other materials to form a finished part. * Apply knowledge of the working properties of materials with CNC programming and knowledge to design and accomplish the operations needed to make machined products that meet precise specifications. * Determine dimensions and configurations of cuts, selection of cutting tools and machine speed and feed rates and according to machine shop processes, part specifications and machine capabilities. * Perform set ups * Determine reference points and direction of machine cutting paths. * Read micrometers and calipers * Set up tooling and operation of machine * Read programs to determine G&M codes * Compare analyze set-up sheet with existing program sheet to assure accuracy of machine instructions. * Observe operation of machine on trial run to prove programmed instructions. * Maintain good housekeeping of working area. Requirements for the role: * Have knowledge of computers and electronics, computer numerical control, and basics of programming and computer aided manufacturing. * Complete quality paperwork. * High school diploma, or equivalent required. * Applicable trade school preferred. * 2 or more years of experience as machinist or machine operator. . * The physical strength and ability to handle tooling and to safely set up large work pieces. * Oversee tools of the trade, and the ability to use them. * Meet production requirements as specified. Travel & Location * This position is fully onsite (Eastlake, OH) We are committed to our employees and will provide you with development and opportunities to allow you to be the best version of yourself at work, at home, and in your community. We foster a genuine inclusive team culture enjoying collaborative working across our global teams to deliver world-class projects. We encourage development - ensuring new experiences and challenges at JBT to feed your growth! Benefits: JBT Corporation offers benefits on day 1 of your employment. Including: Medical, Dental, life insurance, short-term and long-term disability, family leave, vision coverage, and a matched 401(k) plan. Commitment to Diversity: Diversity, Equity, Inclusion, and Belonging is a fundamental value to JBT and critical to our future success. A thoughtful, focused, and sustained effort to work towards our DEIB goals is not just a principled choice, but also a business imperative. Equal Opportunity Employment: John Bean Technologies Corporation ("JBT") provides equal employment opportunity to all employees and qualified applicants for employment. We will not tolerate any form of discrimination against any employee or applicant for employment because of race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, citizenship, or any other characteristic protected by applicable federal, state, or local laws. At JBT, we apply this policy to all our employment practices, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits, and training. We make hiring decisions based solely on qualifications, merit and business needs at the time. JBT will reasonably accommodate applicants who need adjustments to participate in the application or interview process. If you require assistance or accommodation during the application process, please contact Erika Cano at ************ or email *******************.

Enprotech Industrial Technologies is the largest supplier of repair, rebuilding, and field services for the metal forming and steel industry in North America and part of the ITOCHU family of companies. At Enprotech we are committed to providing team members with a safe and inclusive place to work. We value each individual for who they are, what they bring to the table, and respect each other's ideas and contributions. Our core values drive our culture and commitment to our team members. We demonstrate this through every interaction with our team members, as we live out our core values. We are looking for team members that demonstrate these values both at work and in our personal lives. SAFETY | CAN-DO-ATTITUDE | URGENCY | PASSION |INTEGRITY |TEAMWORK | COMMUNITY Is this you? If you want a position to accelerate your career growth, and one where you can make a real impact on our people, our customers, and the business, this is the role for you! Job Description Position Summary & Objective Set up and operate a variety of machine tools to produce precision parts. Set up and operating manual lathes and/or mills. Read, interpret and follow basic blueprints, diagrams, engineering drawings and other written instructions Analyzes design data of part to determine dimension and configuration of cuts, selection of cutting tools, and machine speeds and feed rates, according to knowledge of machine shop processes, part specifications, and machine capabilities. Lifts and positions work piece on machine table, manually or with hoist, and secures it, using clamps, bolts, or fixtures. Machining parts to print per specified tolerances. Determines reference points and direction of machine cutting paths. Computes angular and linear dimensions, radii, and curvatures, and outlines sequence of operations required to machine part. Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines, such as mills, lathes, jig borers, grinders, and shapers. Perform quality work checks to insure the product meets quality standards, using in process inspection tools and devices. Use of overhead cranes to set up material on machines. Qualifications Knowledge and abilities Ability to: demonstrate strong math aptitude; interpret machine prints, geometric tolerancing, and dimensioning; use a feed & speed chart or a calculator to determine appropriate feeds, speeds, and depth of cuts; read blueprints and work from: sketches, diagrams, etc. use precision measuring instruments such as micrometers work overtime and weekends as work load dictates Other Qualification The physical strength and ability to properly handle tooling and to safely set up large work pieces; Own tools of the trade, and the ability to use them effectively Working with engineers to produce quality parts to engineered specification. Education, qualifications and certifications High school diploma or equivalent, technical training and certifications a plus Experience Two - Five years' experience in large-part set up and machining and blueprint reading Environment and Working Conditions Shop environment Hours 2nd Shift: 5:00 pm - 3:00 am Additional Information The benefits of joining our team Because we seek to hire the best people, we work hard to provide benefits that make their lives better, so we offer a comprehensive benefit program which features: Health coverage for you and your family through medical, dental and vision plans 401(k) plan in with a generous company match Financial protection through disability, life, and accidental death & dismemberment insurance plans Tax advantages through flexible spending accounts that allow you to pay for specific health-care and dependent care expenses with pre-tax dollars Generous paid time off program in which the benefits increase along with your tenure with the company When you join our team, you do more than simply switch companies to progress your career. You become part of our family, a group of talented women and men who drive business success. #IND1 Industrious Group and its subsidiaries is an equal opportunity employer. All applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. All employment decisions are made based on qualifications, merit and business need.

We are searching for a manual machinist to join our production team on FIRST SHIFT! Call us today to set up an interview! If you have limited experience in manual marching, or have experience in CNC, we would LOVE to have you on our team! Job Description: Operate various manual machine tools to machine parts from start to finish i.e., lathe, mill, press, etc. Utilize micrometer, calipers, and other inspection tools Perform first piece inspection subject to approval by the quality department Interface with Engineering and quality to ensure product quality and specifications Recommend necessary tooling and consumable supplies for each production job as needed Actively pursue operational improvements to enhance quality, improve production, and initiate cost-reduction opportunities Maintain a clean and organized workspace Assist in the maintenance and repair of machines on a regular basis Utilize material handling equipment to transport material between work centers and areas within the production area Qualifications/Requirements: Must be able to read blueprints, CAD drawings, sketches, written instructions and interpret data Experience in a job shop environment with rapid changeovers and short cycle times a plus Ability to work independently and within a team Ability to work and communicate with all levels of the organization Self-motivated and striving for perfection

Hi-Tek is a family-owned and operated business located in Mason, Ohio who has a reputation as both a development and production source for all major gas turbine manufacturers. We offer a clean, climate-controlled environment and quality and safety are paramount. Machinist Work Hours: M-F 3:30pm-12:00am *OT may be required as needed $20.00 - $23.00 Plus a 15% Shift Differential Hi-Tek is a Drug-Free Workplace and conducts pre-employment 10-panel drug and background screening and random 10-panel drug screening. What you will do: Set-up and operate machines, load/unload parts, and communicate changes and results (in writing and verbally) while adhering to a strict time schedule Inspect and verifies conformance of finished workpiece to customer specifications, using precision measuring tools and equipment as necessary (micrometers, calipers, gauges (pin, thread, indicator, height), optical comparators and coordinate measuring machines (CMM) Good mechanical aptitude and some "shop math" is required. Ability to add and subtract decimals Maintains safe operations by adhering to safety procedures and regulations Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs Documents actions by completing production and quality logs Exceptional time management and or organization skills Ability to perform multiple tasks at the same time Always take ownership and be accountable for your actions Good and reliable attendance and a collaborative attitude are a must Qualifications, Education, and Experience: High school diploma or GED required experience using micrometers, calipers, gauges (pin, thread, indicator, height), optical comparators and coordinate measuring machines (CMM) Previous machining experience required Have basic mechanical aptitude Manufacturing experience preferred but not required Must meet the ITAR definition of §120.15 U.S. person Key Competencies: The ability to work efficiently with others or independently as required Integrity and conscientiousness in all work-related matters Safety-conscious always Reliable attendance within acceptable standards of the attendance policy Must be able to follow verbal and written instructions in English Must be able to clearly communicate information to others verbally and in writing in English Physical Conditions/Demands: Lift, push and/or pull up to thirty-five (35lbs.) pounds regularly Operate overhead crane or other lifting equipment when necessary Stand at least 95% of scheduled shift on raised platform Walking or climbing stairs as needed to perform job duties as assigned Routinely perform reaching, twisting, bending, lifting, and grasping Frequently use gross and fine motor skills to manage various parts, tools, and tooling Specific vision abilities required by this job include close vision, color perception, depth perception, and the ability to adjust focus. 20/20 vision (natural or corrected) required with ability to pass annual vision test as required Hi-Tek is a family-owned and operated business located in Mason, Ohio who has a reputation as both a development and production source for all major gas turbine manufacturers. We offer a clean, climate-controlled environment and quality and safety are paramount. Hi-Tek offers competitive wages and a full benefit package which includes medical, dental, vision, life insurance, short and long-term disability, 9 paid holidays per year, paid vacation time, 401K plan with company match, HSA & Flex Spending programs, supplemental health plans, and more! CLEAN & CLIMATE CONTROLLED environment and we believe in quality and safety above all else. This job description is a tool to be followed. Other job duties may be assigned to you, this outline is not to be considered a detail description, and you may have other duties assigned as needed. Who We Are and What We Do: Hi-Tek Manufacturing, Inc. is a cutting-edge facility specializing in the production of hot gas path (HGP) components and other aviation and power generation turbine engine parts. As a supplier to all major turbine engine original equipment manufacturers (OEMs), we are a full-service facility dedicated to the complete processing of unique alloy components. Since our establishment in 1980, our ongoing success has enabled us to expand and become one of the leading manufacturers in the turbine engine industry. We offer a comprehensive range of manufacturing services designed to meet the most stringent specifications and quality requirements. Precision is vital when machining for aircraft and gas turbine engines. At Hi-Tek, we have continuously enhanced our capabilities and broadened our operations to support our customers' evolving needs for over 40 years. Our extensive experience and expertise in machining processes, including Fast Hole, Wire and Sinker EDM, Laser Processing, and working with Super Alloys, are unmatched in the industry. We have not only consistently expanded our machinery, but we also employ the very best workers who are experts in their fields. Visit our website: **************** Health and Safety: The safety and well-being of every employee are a top priority at Hi Tek Manufacturing. Our facility is exceptionally clean and temperature-controlled, equipped with multiple air-handling and filtration systems to maintain the highest quality environment possible. Each new employee receives comprehensive safety training and is provided with the appropriate personal protective equipment (PPE) for their specific tasks. Additionally, we conduct periodic training throughout the year to review the latest safety standards and federal, state, and local regulations, including the locations of Safety Data Sheets (SDS) and other safety initiatives. Hi Tek Manufacturing boasts the best time-loss accident record in the aerospace industry, reflecting our commitment to the philosophy that every employee deserves the right to return home injury-free daily. EEO Statement: Hi-Tek is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. The company's policy is to recruit, hire, train, and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion are key drivers of our company's success. Hours: M-F 3:30pm-12:00am *OT may be required as needed

C23 Machinist Working at our Cincinnati Aviation Component Service Center: Our ACSC facility develops and conducts a wide array of engine component repairs - including rotating parts, complex assemblies and nozzles on 29 different engine models. * Set up and operate standard machine tools and specialized equipment to make, modify and rework parts and assemblies as directed. * Will use all types of measuring and hand tools and perform related duties. * Will work from planning or written instructions, written procedures, blueprints, and repair manuals. * Will receive work assignments throughout the machine shop and will operate various machine tools. * Will perform repetitive and/or single piece lot work. * Must be able to assist and be directed by higher rated machinist and/or toolmaker in the manufacture of a variety of machine (engine) components and assemblies, and to develop/implement new processes. * Machinists own the repair process from start to finish, so they must be willing to bench, inspect, steam/clean, grit blast, etc. to keep hardware moving. * Maintain associated paperwork. * May be called upon to disposition hardware, maintain/change routers, and instruct others as required and perform related duties. Instruct and train others as required. Required Qualifications: * 2 years minimum experience within a structured training program (such as an apprentice program) with additional work experience of 3 years (i.e., VTL, VBM, Lathe, Bridgeport, Mills, Drills, Grinders, etc.) OR 5 years work experience as a skilled machinist (i.e., VTL, VBM, Lathe, Bridgeport, Mills, Drills, Grinders, etc.) * High school degree, or GED Preferred Qualifications: * Apprentice graduate OR 10 years or more machinist experience * Experience with C.N.C. or N.C. or Robotic equipment * Experience monitoring multiple machines at the same time * Experience setting up and/or operating various hand and power tools and basic machine tools and equipment * Experience using shop math, including fraction and decimals, with working knowledge in algebra, geometry, and trigonometry * Demonstrated skill in the use of precision measuring instruments (CMM equipment, manual instruments) with experience inspecting machined hardware * Experience in reading and interpreting technical documents, drawings, and standards * Knowledge of safety standards and safeguards * Experience in using CMM equipment * 1+ years aerospace machining experience Additional Information: * Ability to pass machinist written and functional test * Must be able to lift and/or move up to 40 pounds on occasion. Items more than 40 pounds will be lifted with assistance. * Role requires ability to operate material handling and lifting devices * Role requires basic use of computers, applications, and keyboarding (e.g. email, Microsoft Excel, etc.) Closing: We strive to keep a fun and enjoyable shop atmosphere while maintaining the highest level of quality work output. We work together to make the impossible happen and we are looking for people like YOU to join us! We're looking for team-oriented individuals with the ability to share ideas and make recommendations with peers and leadership. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not U.S. lawful permanent residents, U.S. Citizens, or have been granted asylee or refugee status (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), employment will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Job Description Lead with precision. Build a culture of safety and quality. Imagine stepping up to a Star or Citizen sliding headstock lathe, loading the bar feeder, and bringing the first part off exactly to the Dimensional Control Plan (DCP). In this lead role, you own the setup, the process, and the standard-while guiding others to meet it. How you'll make an impact Own full setup and operation of Star/Citizen CNC Swiss equipment Prepare, interchange, and verify cutting tools; plan tooling ahead from the parts schedule Maintain coolant and lubrication levels to spec; keep systems running smoothly Ensure machines are cleaned before/after use and operator areas remain safe and orderly Keep the bar feeder continuously supplied throughout the shift Deliver parts to DCP and communicate daily quality updates to the supervisor Execute preventative maintenance and escalate significant machine issues Work strictly to the ISO-based QMS, including all work instructions and the setup procedure list Record and monitor task-in/task-out events and daily production activity Assist in supervising Swiss Operators and support disciplinary actions when required Verify every setup for procedural compliance and dimensional accuracy Adhere to internal rules, OSHA, and outside agency safety requirements Handle additional responsibilities as assigned What success looks like Within your first weeks, you've standardized your setup flow, reduced changeover friction, and ensured that bar feeders run uninterrupted. Quality holds to plan, maintenance is proactive, and the team follows the QMS with confidence. Qualifications High school diploma or equivalent 3+ years of CNC manufacturing experience (required) 3+ years of CNC Swiss machining experience (preferred) Skills you'll rely on GD&T comprehension and application Root-cause troubleshooting CNC machine installation and corrective repair Efficient production setups and changeovers Equipment Star and Citizen CNC Swiss lathes Compensation aligns with demonstrated skills and qualifications.

Enginetics ETG's success is a direct result of our most important asset - our people. Working collaboratively, our team members enjoy a casual, fast-paced, flexible, and rewarding work environment that is: Customer Focused - we understand that our customers are the reason why we're in business. Built on Teamwork - we believe teamwork divides the task and doubles the success. Results Driven - we believe that what gets measured improves. Job Description Enginetics ETG is searching for a hard-working, motivated and dedicated Manual Machinist who is proficient in the programming, setup and operation of vertical milling machines. This is an immediate opening for a multi-talented, top notch Manual Machinist with excellent communication skills to work in our Huber Heights, Ohio facility. This position is on 2nd shift. Shift hours are as follows; 2nd shift Monday-Friday 2:40pm to 11:10pm Qualifications Candidates should have demonstrated experience in the following areas; Set up and fabricate complex precision parts to specifications using manual machine tools such as Bridgeport, Lathe, Surface grinders, drill press, boring bars, etc Ability to set-up and run their own job. Monitor the machining process, measure parts during fabrication operations and adjust settings and operations to ensure product conformance to all applicable specifications. Proficient with the use of measurement instruments: micrometers, dial indicators, calipers etc. Experience and ability to understand and interpret specifications, diagrams and plans Highly motivated, detail oriented, self-sufficient with a “make it happen” attitude & approach. Understanding of G-Code programming a plus. Experience in part inspection, First Piece inspection. Experience with Anilam, Prototrak or similar controls Ability to perform programming using Conversational Prototrak Controls Job shop environment a plus. Additional Information All applicants must successfully complete and pass a background check and drug screening. We offer excellent benefits; Medical, Dental Vision, HSA/FSA, Stock purchase thru weekly employee contribution at a 5% discount, Fidelity 401K, Tuition Reimbursement, and 10 Company paid Holidays. Enginetics ETG is a Drug Free and Tobacco\Smoke Free Campus We look forward to having you join our team as we prepare to “Challenge the Future Together”. Equal Opportunity Employer

Summary:Company seeking a skilled and precise machinist to set up and operate Manual Horizontal Boring Mills, VTL's, and/or lathes. The ideal candidate will be able to work well with minimal supervision. Candidate must also understand how to read mechanical blueprints, perform calculations, and make cuts with precision to meet quality standards. Experience or previous training required with the intent of increasing skills during employment. Duties and Responsibilities: Set up and operate manual controlled machines based on part configuration Ensure all work meets quality standards, instructions, and specifications Understand and comply with industry regulations Read and follow blueprints or original components to manufacture new parts Regularly clean machinery and equipment as needed Requirements and Qualifications: The ability to perform basic math and follow instructions Strong analytical skills, precision, and attention to detail Able to complete tasks in a fast paced job shop environment Excellent attendance required Job Type: Full-time Schedule: 10 hour; 1st shift; M-F. Saturdays typically morning shift. Additional overtime as required. Candidate must be able to reliably commute to Twinsburg, OH 44087

Job Description ACME Conventional Machinist - Chardon, OH 1st & 2nd SHIFT This is an excellent opportunity to grow with a company where advancement opportunities are possible. A great opportunity for someone to come in and train with knowledgeable machinists and gain advancement opportunities through work ethic and initiative. Responsibilities and Requirements: Set-up/ Programming on conventional ACME machines. Ideal candidate will be able to complete set-up process. Prior experience on conventional ACME machines. Must have tools. Must be familiar with typical measuring equipment. Must be able to read blue prints. Must be able to lift max of 30 lbs. repeatedly throughout day on a daily basis Benefits: Medical benefits partially paid for paid vacation, holidays plus up to 3% match on retirement contribution Please Note: As part of our typical recruiting process, from time to time, we may contact you regarding positions that we feel are a good fit for you via SMS text message. Message and data rates may apply, depending on your mobile phone service plan. At any time you can opt-out completely by replying STOP. By applying to this position, by applying you are giving consent to this.

Job Description Responsibilities: Ability to work in a fast paced ever changing group of businesses within the Aerospace Industry while maintaining a professional disposition and team mentality. Set-up and operation of CNC mills, CNC lathes, and all manual tool room equipment to produce fixtures, gages or other work holding along with customer parts. Experienced in holding tight tolerances and working on their own from prints, process sheets, and travelers to follow or determine the right processing for the company need while ensuring safety and maximum efficiency. Read and interpret blueprints, technical drawings and GD&T specifications. Verify dimensions of finished parts to ensure they conform to specifications using dial indicators, gauge blocks, calipers, micrometers, CMM's, Optical Comparators, and other quality gages. Work with engineers and operators on various shop improvement projects. Help manage and improve the company's Tooling and Fixturing Database working with Engineering / Operational resources. Utilize hand and machine tools for assemblies and to repair and modify gauges, and jigs etc. Work collaboratively with other departments to assist in both product design and design for manufacturing. Diagnose and troubleshoot problems and perform repairs on tools and fixtures. File and finish workpieces using the appropriate hand tools to ensure products are smooth and that they fit together properly. Requirements: Experience with SolidWorks and CAM packages is preferred. Experience with Tooling and Fixturing is a necessary skill set. Fluent in reading customer drawings, specifications and sketches containing multiple views and sections. Must have the ability to accurately measure and perform all quality inspections throughout the process. Ability to use calipers, micrometers, surface table height gauges, dial indicators, gauge blocks and gauge pins. Manual and CNC background required Experience working in an AS9100 environment a plus. Pay commensurate with experience. Benefits: 401(K) Retirement Plan with Company Match Medical, Dental, Vision - Complete Health Care Package Company Paid short-term, long-term, and life insurance. Vacation and Sick Time 10 paid Holidays Safety shoe and eyeglass allowance #hc190883