Manufacturing associate jobs in Smithtown, NY - 137 jobs

Responsible for the implementation of lean and six sigma process improvement projects. This position is “hands on” and mechanically inclined to bridge the gap between existing work stations and practices, to new and improved work stations and practices. The position requires the ability to build new workstations as recommended and train new lead people on operational logistics. Responsibilities: Assembles, sets up and organizes the workstations in the cells. Collects workstation related information such as equipment, services, tools and fixtures. Coordinates in procuring/fabricating the tools and fixtures and other workstation related equipment. Helps set up material and parts kanbans. Establishes Total Productive Maintenance (TPM) schedules and follows up on uptimes on the machines/ equipment involved in the project. Coordinates and helps in kaizen projects (5-S, workstation reorganization, etc.). Performs other tasks related to Lean/Six Sigma projects, depending upon the type of project, i.e., office, safety, ergonomic, etc. Requirements: Trade School graduate minimum. Associate's Degree preferred; Two or more years' experience in a maintenance or assembly technician role in a manufacturing environment with experience in a lean environment preferred; Basic knowledge of lean/six sigma practices and principles; Ability to assemble workstations with good knowledge of blueprints, tools and fixtures; Good working knowledge of hydraulics/ pneumatic systems; Ability to create and follow work instructions; Ability to coordinate with suppliers in procuring tools and items related to workstation organization; Ability to identify and assist with implementation of lean / CI projects. Knowledge of safety and ergonomic principles (proactive vs reactive with EHS standards) This person should be a team player with good communication skills Ashcroft Inc. is an Equal Employment Opportunity Employer EOE AA M/F/Veteran/Disability Please note: The position requires U.S. Citizen, Permanent Legal Resident or granted Asylee/Refugee status under the Immigration and Nationality Act.

Full-time Description North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies. Our products and services are used by the military, aerospace, and industrial markets, helping to advance technology and protect the free world. NAI was proud to be recognized as a Top Workplace on Long Island by Newsday! Our culture is very collaborative. We have team building events, company picnics, special event day and employee game room. Please visit our website at ******************** to see more about what makes us a unique place to work. Summary: The Production Operator works in an electronics manufacturing environment assembling printed circuit boards (PCBs). This role involves using computers and equipment to perform daily production tasks. Following instructions and maintaining attention to detail are essential to ensuring the quality of the products. Keeping the workspace clean and organized is a key part of maintaining high production standards. The Production Operator will be trained to operate various machines, including Pick and Place, Automated Optical Inspection (AOI), Selective Soldering equipment, and hand assembly. Flexibility is important, as the operator frequently moves between tasks and functional areas. Teamwork, punctuality, and communication are critical to the success of this role. Requirements Organize and label products to ensure proper tracking during production. Apply gels and adhesives to components as part of the assembly process. Prepare electronic components for assembly into PCBs. Use basic hand tools for mechanical assembly tasks. Utilize machines to assemble printed circuit boards. Candidates must be a U.S. Person, defined as either a U.S. citizen or a lawful permanent resident (Green Card holder), and must be able to provide appropriate documentation upon hire to verify this status. Please note that some positions involve sensitive customer contracts and require U.S. citizenship as a condition of employment. Qualifications and Education Requirements: High School Diploma or equivalent. Language Skills: Fluent in English (reading, writing, and speaking). Strong oral and written communication skills. Other Skills and Abilities: Experience working in a team environment. Ability to lift 40 pounds. Ability to work on your feet. Familiarity with basic hand tools. Effective communication skills, both written and verbal. Computer literate a plus Ability to learn new skills (Certified Training will be provided). Conscientious regarding quality, time management, teamwork, and safety. Flexibility to train and move between functional areas. North Atlantic Industries offers comprehensive and competitive packages including: Benefits Medical, Dental, and Vision Insurance Company-provided Life and AD&D Insurance Voluntary Supplemental Life Insurance Long-term Disability Insurance Flexible Spending Accounts (FSA) Employee Assistance Program (EAP) 401(K) with company matching contributions Vacation, holidays, sick Employee tuition reimbursement Annual bonus eligibility Opportunities for learning and career development Work Schedule and Environment Monday to Friday, 2nd Shift 3pm-11:30pm Discretionary 9/80 Schedule Business casual dress code North Atlantic Industries (NAI) is proud to be an Equal Opportunity Employer and is committed to providing equal employment opportunity for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to any legally protected status. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at ************ or by email at ***********. As a federal government contractor, in accordance with applicable laws, regulations, and Executive Orders, North Atlantic Industries (NAI) is required to develop annual Affirmative Action Plans for Protected Veterans and Individuals with Disabilities. Any employees or applicants who wish to review the Affirmative Action Plan for Protected Veterans and Individuals with Disabilities can contact us by sending an email to *********** or by calling ************. Salary Description $18-$23 per hour +Night Differential

Job Description Qualifications: Education and/or Work Experience Requirements: At least (3) years experience in a production environment Experience with metal fabrication processes such as die forming, roll forming, welding strongly desired Press operation and setup strongly desired Experience with basic measuring equipment such as calipers or micrometers Experience reading and interpreting job instructions and blueprints Experience in a smaller production environment Experience with closely related seal products a plus Responsibilities: Perform specific metal fabrication operations as specified by supervisor. Read and interpret process sheets/work instructions to perform assigned tasks. Set up and operate both die forming and roll forming equipment. Measure work piece dimensions to ensure accuracy to blueprint. Work with manufacturing engineers and other production operators to resolve production issues.

CSP is the industry leader in the formulation and molding of lightweight, advanced composite components for the transportation industries. As an innovative, full-service Tier One supplier, we offer an entrepreneurial environment where you're only limited by your own imagination. In addition to our team-focused environment, we provide industry-leading benefits, called BENEfits4U. Our comprehensive offering includes: affordable medical, dental, and vision care; flexible spending accounts; life insurance; 401k with company match and much, much more. Job Description CSP is excited to hire motivated individuals looking to make a difference on our growing production team as Molding, Bonding and Finishing employees on all shifts! Your job responsibilities include: Producing parts by loading molding material into presses using methods defined in standardized work instructions. Starting machines, monitoring operations, and recording operational data. Performing detailed dimensional inspection of work product to identify potential defects. Preparing molded components for prime and paint operations including de-flashing and detailing to customer specifications through use of hand and/or power tools. Notifying Supervisor when defects exceed acceptable limits or when major equipment malfunctions occur. Maintaining a clean and safe working environment in line with Company standards Why work for us? Wage progression system with raises at 1-year and 2- year. Medical, dental, & vision benefits after 30-days of employment. 8-hour workdays with a paid lunch break; choice of shift pattern that fits your lifestyle (1st, 2nd, & 3rd). Quarterly and Annual perfect attendance bonuses. Team-based work environment. Promotion opportunities, training, and development. Clean and safe work environment Growing organization with an international network If you enjoy innovation, and an opportunity to learn and contribute to a growing organization, CSP is the place for you!

Benefits: Commission Opportunities Cell Phone Reimbursement Health Insurance Options Company Match IRA Bonus based on performance Company car Opportunity for advancement Paid time off Parental leave Training & development The Northern Westchester & Southern CT offices of CertaPro Painters (**************************** or *************************** are looking for an outgoing, assertive and ambitious individual with experience in the construction industry AND project management to become our COMMERCIAL FIELD PRODUCTION ASSOCIATE. THE MAIN RESPONSIBILITY OF THIS POSITION IS TO SUCCESSFULLY MANAGE ON-SITE PAINTING CREWS, ENFORCE THEIR ATTENTIONTO THE DETAILS OF SALES CONTRACTS AS WELL AS CERTAPRO PERFORMANCE GUIDELINES, ENFORCE OSHA AND COMPANY SAFETY GUIDELINES, MAXIMIZE THEIR PRODUCTIVITY, AND ALSO HANDLE CUSTOMER DRIVEN ISSUES AND TURN THEM INTO OPPORTUNITIES. THE SECONDARY RESPONSBILITY IS AROUND ASSISTING IN ESTIMATING PROJECTS AND PROVIDING FEEDBACK TO THE TEAM CUSTOMER SERVICE EXPERIENCE REQUIRED PAINTING EXPERIENCE A PLUS PAINTING & CARPENTRY SKILLS HIGHLY DESIRABLE COMPUTER SKILLS REQUIRED You will establish and build relationships with our painting crews You will interact with our clients and support our high level customer service program. You will be a Brand Ambassador and must represent our company values. You will be responsible to train crews to our standards You will be involved in some aspects of selling too. This position involves heavy customer interaction This position demand lots of driving This position is available immediately Benefits: - Starting Compensation Package - $60k - $70k with performance bonus/commissions - Reimbursement for Cell-Phone - Company Car (or Vehicle Allowance) after 3 months - Computer and Training - Company Match IRA Program - Optional Health Benefits - Advancement Opportunities - Performance Bonuses - Additional Commission Opportunities Requirements: - Full Time commitment 50+ hours a week - Available to work early mornings, evenings and weekends - Occasional out of state travel work - Must Have Own Vehicle and valid driver's license - Must be familiar with Westchester and Fairfield Counties - Outgoing / Excellent communication skills - Motivated self starter - Professional appearance and demeanor - Must be highly fluent in English - Spanish Speaking is a PLUS Live our company values:1) Deliver What You Promise2) Respect the Individual3) Have Pride in What You Do4) Practice Continuous Improvement 5) Embrace Possibilities Compensation: $60,000.00 - $70,000.00 per year Opportunity is Knocking Qualities like working hard, getting the job done right, and fostering respect while working as part of a team are core to the CertaPro Painters brand culture. This makes each independently owned and operated CertaPro Painters franchise unique and fulfilling places to work. It is important to not only deliver memorable experiences for customers, but for team members of each independently owned and operated CertaPro Painters franchise, as well. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to CertaPro Painters Corporate.

Job Title: Production Operator FLSA Classification: Non-Exempt Department: Production Reports to: Production Manager Job Duties & Responsibilities: Degreasing Grit blasting Surface Finishing Masking/Damasking Following Prescribed Procedures Operating Equipment Documentation and Adherence to work instructions. General Housekeeping Other related tasks assigned if needed. Shifts: 6:30AM to 3:00PM, Monday to Friday 3:00pm to 1:30AM, Monday to Thursday This is a Full Time Position, 8 or 10 hours per day, 2 shifts per day availability. Able and willing to work flexible hours, overtime, and weekends if necessary. Physical demands: Able to lift up to 50 lbs. Able to work on feet for full shift. Work Environment: This job operates in a manufacturing environment. The individual is required to adhere to safety policies and procedures on the manufacturing floor. Travel : None Education: High School or GED or higher Detail-oriented Able to work in a fast-paced environment. Flexibility with schedules

JOB TITLE: Manufacturing Technician TYPE: Full time, regular COMPENSATION: $22.00/hr - $32.00/hr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Manufacturing Technician will play a key role in supporting the production and assembly of our advanced electro-mechanical device, SectionStar , as part of a close-knit manufacturing team. This role is hands-on, requiring expertise in assembling, testing, and troubleshooting components and systems to meet quality and performance standards. The ideal candidate would have experience working in a fast-paced production environment, preferably with medical devices, and a strong understanding of manufacturing processes and tools. We are looking for a detail-oriented team player who values precision and views medical device development as a competitive advantage. Responsibilities: Assemble, calibrate, and test electro-mechanical subsystems according to established procedures and specifications Troubleshoot and repair mechanical, electrical, and electronic components to ensure functionality and performance Conduct quality checks at various stages of production to ensure adherence to quality standards and specifications Follow all production activities in compliance with regulatory requirements (ex: ISO 13485, FDA) Maintain and troubleshoot manufacturing equipment to ensure optimal performance and minimal downtime Collaborate with engineering and quality teams to implement process improvements and resolve production issues Maintain a clear and safe working environment by following company safety protocols and procedures Qualifications: Minimum HS Diploma / GED or equivalent experience 1-3 years of manufacturing experience, preferably in medical device, electro-mechanical, optical, or automotive industries Strong attention to detail, organizational skills, and self-discipline to maintain compliance and quality standards Ability to read, interpret, and follow work instructions, specifications, and engineering drawings Strong interpersonal, verbal, and written communication skills Ability to work both independently and collaboratively in a team-oriented environment Flexibility to adapt to a fast-paced and evolving environment and assist others as needed Basic computer skills with proficiency in standard business software (ex: Microsoft Office) and a willingness to learn new technologies Mechanically inclined, with a curiosity to learn and a drive to meet aggressive milestones and deadlines Familiarity with ISO 13485 and experience developing tooling to improve processes a plus Familiarity with continuous improvement principles and experience supporting process enhancements a plus Knowledge of equipment maintenance and calibration processes a plus Work Environment: This role requires standing for extended periods, working with small components, and operating machinery in a fast-paced production environment. Flexibility to work occasional overtime may be required to meet production demands Company Offers: Competitive salary, commensurate with experience and education Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays) Overtime opportunities available for those interested in additional hours A collaborative and diverse work environment where our teams thrive on solving complex challenges A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description iRocket is developing reusable, fully autonomous small launch vehicles to deliver more frequent, lower-cost access to space. We work across propulsion, structures, integration, and test domains, building toward an era of responsive launch systems. The Role: We are seeking a Manufacturing Technician to support the fabrication, assembly, and integration of structural and mechanical subassemblies for our rocket hardware. You'll work closely with manufacturing and quality engineers to build reliable flight hardware in line with strict aerospace standards. Manufacture and assemble flight hardware using methods such as drilling, fastening, bonding, and other mechanical processes Use precision calibrated tools (e.g. torque wrenches, micrometers, calipers) Read and interpret technical drawings, blueprints, and work instructions Follow procedures, specifications, and test instructions to ensure hardware is built to design requirements Collaborate with manufacturing engineers and quality personnel to develop, refine, and document work instructions Ensure production tasks are completed on schedule, safely, and to the required quality Perform other related duties as needed to support efficient operations Requirements High school diploma, GED, or equivalent work experience Strong communication and collaboration skills Ability to interact effectively (verbal and written) with engineering, production, and quality teams Experience in New Product Introduction (NPI) or development environments Precision drilling experience (tolerance ~ ±0.001 in) Experience in aerospace, aviation, military, medical device, or other high-reliability industries Ability to read and interpret advanced technical drawings, manuals, and reports Proficient use of precision measuring instruments Experience working in cleanroom or controlled environments Familiarity with forklifts, cranes, or heavy equipment Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Short Term & Long Term Disability Wellness Resources

Open Scientific provides contract staffing and direct hire recruitment services for the scientific, engineering, laboratory and manufacturing sectors. Job Description Shift: Both 1st and 2nd shifts are available (Monday through Friday) 1st shift start time: 5:00am / 2nd shift start time: 2:00pm Job Responsibilities: Operate various production machines Assure that the machines are running properly Perform quality checks to confirm finished products are properly sealed Qualifications: Prior warehouse or manufacturing experience preferred Experience working with pharmaceutical or food manufacturing a plus Must be able to lift 60lbs This is a physical, active position that requires standing, bending, lifting, carrying, kneeling, etc Ability to work in a refrigerated environment Additional Information All your information will be kept confidential according to EEO guidelines.

Job Title: Production Operator C Classification: Hourly, Full Time, Non-Exempt Department-Location: Production - CT Direct Supervisor: Production Supervisor The Production Operator “C” position is an entry-level position that primarily focuses on ensuring product quality control by utilizing various sampling and analytical testing protocols. This position also supports multiple departmental non-essential or critical functions as directed by supervision (supports B, A, and Lead Operators). This position requires some computer skills for data entry, e-mail communication, and the creation of work requests. This position requires working a rotating schedule. Supervisory Responsibilities: None Essential Responsibilities: Assists the Lead Operator or A Operator in monitoring process equipment and making necessary adjustments, as directed, to maintain process parameters as specified within Standard Operating Procedures (SOP's). Performs sampling and analysis to maintain process and finished product specifications. Maintains operation of filter presses by placing them on or offline for cleaning. Loads waste materials into hoppers from filter presses. Maintains salt storage area and adds salt to each saturator as needed. Must have the ability to safely operate a front-end loader (heavy equipment). Maintains the brine guard filters by replacing the filtering media as needed. Maintains the body feed tanks by adding water and cellulose bags to each tank as required. Operates and maintains plant utility equipment (air, water, steam, etc.) as directed. Archives and organizes process records as instructed by supervision. Provides housekeeping throughout the facility. Keeps the plant in order/clean condition. Maintains an inventory of necessary supplies for various departments as instructed by supervision. May be assigned facilities maintenance duties as needed. Performs inventory reconciliation on the laboratory reagent chemicals. Provides support during railroad drills. Assists with answering phones during off-hours. Assists with the handling of non-EHS railcars. Assists with electrolyzer cell rebuilding. Always wears appropriate safety equipment. Provides awareness level support to on-site incidents. Serves as a member of The Facility Security Staff. Provides escort service for facility visitors. Performs other duties as assigned by supervision. Required Skills/Abilities: This is a non-EHS job function. Must have the capability of using Fall Suppression Equipment. Must have a valid driver's license and reliable transportation. Must be able to pass a 10-panel controlled substance testing and random testing after that. Must be able to pass a background investigation check and maintain good standing order, as per TSA's TWIC criteria. * Medically qualified means the employee must submit to an annual physical which may include a drug screening. Education and Experience: High School diploma or equivalent. Experience working in a chemical manufacturing facility is a plus. Physical Requirements: Frequently climbs stairs and ladders. Frequently bends, stands, and lifts to 40lbs. Must be able to work outdoors in different climate conditions. Must be able to sit for extended periods. Must be able to walk on secure elevated process platforms more than 15-foot heights. This position description is not intended to be and should not be construed as an all-inclusive list of responsibilities, skills, or working conditions associated with this position. While this position description is intended to reflect the position's activities and requirements accurately, management reserves the right to modify, and or remove duties as necessary. This is a Safety Sensitive Position within the organization. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job Title: Production Operator C Classification: Hourly, Full Time, Non-Exempt Department-Location: Production - CT Direct Supervisor: Production Supervisor The Production Operator “C” position is an entry-level position that primarily focuses on ensuring product quality control by utilizing various sampling and analytical testing protocols. This position also supports multiple departmental non-essential or critical functions as directed by supervision (supports B, A, and Lead Operators). This position requires some computer skills for data entry, e-mail communication, and the creation of work requests. This position requires working a rotating schedule. Supervisory Responsibilities: None Essential Responsibilities: Assists the Lead Operator or A Operator in monitoring process equipment and making necessary adjustments, as directed, to maintain process parameters as specified within Standard Operating Procedures (SOP's). Performs sampling and analysis to maintain process and finished product specifications. Maintains operation of filter presses by placing them on or offline for cleaning. Loads waste materials into hoppers from filter presses. Maintains salt storage area and adds salt to each saturator as needed. Must have the ability to safely operate a front-end loader (heavy equipment). Maintains the brine guard filters by replacing the filtering media as needed. Maintains the body feed tanks by adding water and cellulose bags to each tank as required. Operates and maintains plant utility equipment (air, water, steam, etc.) as directed. Archives and organizes process records as instructed by supervision. Provides housekeeping throughout the facility. Keeps the plant in order/clean condition. Maintains an inventory of necessary supplies for various departments as instructed by supervision. May be assigned facilities maintenance duties as needed. Performs inventory reconciliation on the laboratory reagent chemicals. Provides support during railroad drills. Assists with answering phones during off-hours. Assists with the handling of non-EHS railcars. Assists with electrolyzer cell rebuilding. Always wears appropriate safety equipment. Provides awareness level support to on-site incidents. Serves as a member of The Facility Security Staff. Provides escort service for facility visitors. Performs other duties as assigned by supervision. Required Skills/Abilities: This is a non-EHS job function. Must have the capability of using Fall Suppression Equipment. Must have a valid driver's license and reliable transportation. Must be able to pass a 10-panel controlled substance testing and random testing after that. Must be able to pass a background investigation check and maintain good standing order, as per TSA's TWIC criteria. * Medically qualified means the employee must submit to an annual physical which may include a drug screening. Education and Experience: High School diploma or equivalent. Experience working in a chemical manufacturing facility is a plus. Physical Requirements: Frequently climbs stairs and ladders. Frequently bends, stands, and lifts to 40lbs. Must be able to work outdoors in different climate conditions. Must be able to sit for extended periods. Must be able to walk on secure elevated process platforms more than 15-foot heights. This position description is not intended to be and should not be construed as an all-inclusive list of responsibilities, skills, or working conditions associated with this position. While this position description is intended to reflect the position's activities and requirements accurately, management reserves the right to modify, and or remove duties as necessary. This is a Safety Sensitive Position within the organization. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Two Roads Brewing is seeking a Packaging Technician to join the team in Stratford, CT. There are four primary unit operations; canning, bottling, variety packaging, and kegging. The packaging technician follows the lead of Packaging supervisors and the Packaging Manager and ensures safe and efficient operation of the equipment under their responsibility. The Packaging Technician takes care to release the highest possible quality products. Working Relationships: This position of Packaging Technician reports directly to the Packaging Supervisor on the shift at the brewery. This person collaborates with other packaging technicians, warehouse forklift operators, quality coworkers and brewers. Essential Duties & Responsibilities: Regular attendance in order to work packaging shifts as scheduled by packaging manager weekly. Learn, understand and execute packaging operations according to standard operating procedures. Operate machinery following all safety guidelines in an efficient manner. Observe machine operations to ensure quality and conformity of filled or packaged products to brewery standards. Keep the packaging areas and workspaces clean and organized. Help out as needed in all other parts of the brewery. (Team Player) Perform basic maintenance on machinery to ensure it is functioning safely, properly, and efficiently. Communicate all mechanical issues to Packaging Supervisor and maintenance department. Communicate the department's materials needs to ensure the production schedule is executable. Attend departmental meetings. Attend special events and brewery staff meetings as requested by Packaging Manager. Maintain packaging tools and materials by storing safely, neatly and in an organized fashion. Ensure finished product is safely and neatly stored in the cooler and logged in accurately each day. Complete all paperwork associated with each duty with 100% accuracy. Assist co-workers and cross train in other departments to ensure brewery goals are accomplished. Responsible for personal and fellow coworker safety in the packaging area Responsible for highest packaged product quality Defend and build company culture Other duties as assigned SKILLS, ABILITIES AND PERSONAL CHARACTERISTICS Extremely high level of attention to detail Excellent time management skills Proven ability to work well with others Demonstrated mechanical aptitude Advanced mathematical and reasoning skills Strong overall understanding of safety procedures, regulations and requirements Excellent written and verbal skills. Ability to prioritize tasks and meet deadlines Takes ownership and initiative Have understanding of OSHA regulations Must have a flexible schedule and ability to work a rotating on-call schedule for after-hour emergency Attitude: Positive, team oriented and results driven with a good sense of humor Benefits: Salary: Commensurate with experience Great Benefits - medical, dental, vision, 401(k) with company match, PTO, and best of all FREE BEVERAGES! Hands-on training - Learn how to use our state of the art equipment! Open Door Policy - At Two Roads, your ideas and feedback matter. With our open door policy, you will experience a more fulfilling career where you are truly valued. Learning Environment - Two Roads is dedicated to employee development and education - we are committed to your success! Advancement opportunities - We are always looking for key players motivated to move up into specialized roles throughout the brewery. Environmental Conditions While performing the duties of this position, the packaging technician is exposed to inside and outside environmental conditions, including but not limited to; extreme heat, potential for physical injury, exposure to hot fluids, pressurized vessels and transfer lines, strong odors, chemicals, loud regular noise, extreme heights, and moving machinery. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications Physical, Mental, and other Requirements Ability to stand for extended periods of time Ability to lift 55lbs Ability to work a flexible schedule: days, nights, and/or weekends Will be responsible for using various machinery, tools, and PPE High school diploma or equivalent preferred

Job DescriptionBenefits: 401(k) matching Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Closets by Design is a nationally recognized leader in home organizing systems. We design, manufacture, and install a complete line of custom closets, home office furniture, media systems, wall-beds, garage cabinetry and more. We desire motivated, organized, caring individuals who have a passion to provide outstanding craftsmanship and superior customer service. We are currently seeking an enthusiastic and motivated Production Operator to join our growing team! Summary/Objective: The Production Operator position is responsible for operating wood cutting and finishing equipment, maintaining production records, and communications associated with activities of equipment, product, and customer specification. They are responsible for the machine and builds including its condition and safe operation. Must maintain product quality and production output in accordance with company and customer standards. Essential Functions: Ability to read work orders to determine profile type, machine setup procedures, and type of build to be cut. Select and install cutting heads and all proper tooling on machine according to the pattern. Run materials through machinery and inspect for proper profile specifications. Make any required adjustments needed before producing order. Use machinery to cut wood to customer specifications. Follow production schedules. Responsible for general machine/tool maintenance. Check for proper lengths and quality, change tooling when worn. Complete production records. Maintain a clean/safe work area at all times. Perform other duties as required. Competencies: Ability to operate machinery safely and determine when maintenance is needed. Possess strong mechanical aptitude. Consistently meet project deadlines. Practical mathematic and measuring skills Must follow company policies, safety instructions, and wear required protective equipment. Able to function effectively as part of a production team. Dependable, works well with others, self-motivated. Required Education and Experience: High school diploma, GED or equivalent 1+ year of experience machine operation Ability to communicate with supervisors and co-workers Must be able to follow directions + follow specific work procedures/steps Experience with hand and power tools Mathematical aptitude Working Conditions and Physical Demands: While performing the duties of this job, the employee is exposed to airborne particles, dust, debris, moving forklifts, noise, and vibration. Physical demands include: Walking: Occasionally between work stations or to obtain parts and supplies. Lifting: Lift and carry up to 50 pounds for short distances. Schedule: Monday - Friday from 7:00 am to 3:30 pm. Benefits: 401(k) match Dental insurance Health insurance Holidays and Paid time off Vision insurance Open door policy Work Location: Bethel, CT

Electromechanical Assembler We are seeking a detail-oriented Electromechanical Assembler to join our team on Night shift schedule: 10:30PM to 6:30 AM, 5 days a week(Sunday - Thursday). This role involves assembling, integrating, and qualifying advanced technical products in a cleanroom environment, following precise specifications and procedures. Core Responsibilities Product Assembly & Testing accurately build and test high-precision equipment by following detailed technical documentation. Report recurring issues and contribute to process optimization alongside engineering and quality teams. Support Daily Operations Execute production tasks according to set protocols and timelines. Troubleshoot minor technical issues and keep detailed logs of completed work and hand-offs between shifts. New Product Support Participate in trial runs for new products and provide input to improve documentation and assembly methods. Identify and communicate risks that may affect production timelines Technical Knowledge Development continuously expand knowledge of system components, tools, and procedures to support efficient assembly and diagnostics. Team Collaboration Work with peers to meet production goals, assist in training new team members, and contribute ideas for improving efficiency and quality. Health & Safety strictly follow all cleanroom and safety protocols, including the use of personal protective equipment and compliance with environmental and health guidelines. Requirements At least 2 years of hands-on mechanical assembly experience, preferably with precision tools High school diploma or GED required Familiarity with lean manufacturing principles such as 5S, Kaizen, and continuous improvement Comfortable using software applications for diagnostics and production tracking (experience with ERP systems, LabVIEW, or testing software is beneficial) Comfortable working independently or within a team in a fast-paced, highly regulated environment Ability to read and follow detailed procedures and interpret technical data accurately Work Environment & Physical Expectations This role takes place in a temperature-controlled cleanroom following strict quality and environmental standards Full-body PPE required throughout shift, including gowning multiple times daily Frequent standing, walking, bending, reaching, and occasional lifting of up to 35 lbs Must be comfortable working at heights, using ladders and platforms, and operating handling equipment such as pallet jacks or overhead cranes Visual acuity requirements include close vision, color differentiation, and depth perception Additional DetailsDue to regulatory compliance, applicants must be eligible to access controlled technology under U.S. export laws prior to the start date. Priority will be given to candidates who already meet this requirement. HAMILTON CONNECTIONS IS AN EQUAL OPPORTUNITY EMPLOYER

Full-time Description North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies. Our products and services are used by the military, aerospace, and industrial markets, helping to advance technology and protect the free world. NAI was proud to be recognized as a Top Workplace on Long Island by Newsday! Our culture is very collaborative. We have team building events, company picnics, special event day and employee game room. Please visit our website at ******************** to see more about what makes us a unique place to work. Summary: The Production Operator works in an electronics manufacturing environment assembling printed circuit boards (PCBs). This role involves using computers and equipment to perform daily production tasks. Following instructions and maintaining attention to detail are essential to ensuring the quality of the products. Keeping the workspace clean and organized is a key part of maintaining high production standards. The Production Operator will be trained to operate various machines, including Pick and Place, Automated Optical Inspection (AOI), Selective Soldering equipment, and hand assembly. Flexibility is important, as the operator frequently moves between tasks and functional areas. Teamwork, punctuality, and communication are critical to the success of this role. Requirements Organize and label products to ensure proper tracking during production. Apply gels and adhesives to components as part of the assembly process. Prepare electronic components for assembly into PCBs. Use basic hand tools for mechanical assembly tasks. Utilize machines to assemble printed circuit boards. Qualifications and Education Requirements: High School Diploma or equivalent. Language Skills: Fluent in English (reading, writing, and speaking). Strong oral and written communication skills. Other Skills and Abilities: Experience working in a team environment. Ability to lift 40 pounds. Ability to work on your feet. Familiarity with basic hand tools. Effective communication skills, both written and verbal. Computer literate a plus Ability to learn new skills (Certified Training will be provided). Conscientious regarding quality, time management, teamwork, and safety. Flexibility to train and move between functional areas. North Atlantic Industries offer comprehensive and competitive packages including: Medical, Dental, and Vision Insurance Company-provided Life and AD&D Insurance Voluntary Supplemental Life Insurance Long-term Disability Insurance Flexible Spending Accounts (FSA) Employee Assistance Program (EAP) Tax-deferred 401K with company matching contributions. Vacation, holidays, sick Employee tuition reimbursement Business casual dress environment Schedule: M-F 1st Shift 7AM-3:30PM North Atlantic Industries (NAI) is proud to be an Equal Opportunity Employer and is committed to providing equal employment opportunity for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to any legally protected status. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at ************ or by email at ***********. As a federal government contractor, in accordance with applicable laws, regulations, and Executive Orders, North Atlantic Industries (NAI) is required to develop annual Affirmative Action Plans for Protected Veterans and Individuals with Disabilities. Any employees or applicants who wish to review the Affirmative Action Plan for Protected Veterans and Individuals with Disabilities can contact us by sending an email to *********** or by calling ************. Salary Description $18-$23 per hour

Job Description JOB TITLE: Manufacturing Technician TYPE: Full time, regular COMPENSATION: $22.00/hr - $32.00/hr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar™ by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Manufacturing Technician will play a key role in supporting the production and assembly of our advanced electro-mechanical device, SectionStar™, as part of a close-knit manufacturing team. This role is hands-on, requiring expertise in assembling, testing, and troubleshooting components and systems to meet quality and performance standards. The ideal candidate would have experience working in a fast-paced production environment, preferably with medical devices, and a strong understanding of manufacturing processes and tools. We are looking for a detail-oriented team player who values precision and views medical device development as a competitive advantage. Responsibilities: Assemble, calibrate, and test electro-mechanical subsystems according to established procedures and specifications Troubleshoot and repair mechanical, electrical, and electronic components to ensure functionality and performance Conduct quality checks at various stages of production to ensure adherence to quality standards and specifications Follow all production activities in compliance with regulatory requirements (ex: ISO 13485, FDA) Maintain and troubleshoot manufacturing equipment to ensure optimal performance and minimal downtime Collaborate with engineering and quality teams to implement process improvements and resolve production issues Maintain a clear and safe working environment by following company safety protocols and procedures Qualifications: Minimum HS Diploma / GED or equivalent experience 1-3 years of manufacturing experience, preferably in medical device, electro-mechanical, optical, or automotive industries Strong attention to detail, organizational skills, and self-discipline to maintain compliance and quality standards Ability to read, interpret, and follow work instructions, specifications, and engineering drawings Strong interpersonal, verbal, and written communication skills Ability to work both independently and collaboratively in a team-oriented environment Flexibility to adapt to a fast-paced and evolving environment and assist others as needed Basic computer skills with proficiency in standard business software (ex: Microsoft Office) and a willingness to learn new technologies Mechanically inclined, with a curiosity to learn and a drive to meet aggressive milestones and deadlines Familiarity with ISO 13485 and experience developing tooling to improve processes a plus Familiarity with continuous improvement principles and experience supporting process enhancements a plus Knowledge of equipment maintenance and calibration processes a plus Work Environment: This role requires standing for extended periods, working with small components, and operating machinery in a fast-paced production environment. Flexibility to work occasional overtime may be required to meet production demands Company Offers: Competitive salary, commensurate with experience and education Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays) Overtime opportunities available for those interested in additional hours A collaborative and diverse work environment where our teams thrive on solving complex challenges A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Two Roads Brewing is seeking a mechanically inclined Packaging Technician to join our team in Stratford, CT. This hands-on role plays a critical part in ensuring the smooth, safe, and efficient operation of our packaging lines, including canning, bottling, variety packaging, and kegging. Ideal candidates will bring a strong understanding of mechanical systems and a working knowledge of how to adjust, troubleshoot, and maintain packaging machinery. We're seeking an individual with a passion for quality, safety, and continuous improvement who excels in a fast-paced team environment. Working Relationships: This position of Packaging Technician reports directly to the Packaging Supervisor on the shift at the brewery. This person collaborates with other packaging technicians, warehouse forklift operators, quality coworkers and brewers. Key Responsibilities: Operate packaging line equipment (canning, bottling, kegging, etc.) following SOPs and safety guidelines. Observe machinery and perform real-time adjustments to ensure efficiency and high product quality. Troubleshoot basic mechanical issues, perform light repairs, and escalate complex issues to maintenance. Maintain clean and organized packaging areas and adhere to sanitation standards. Collaborate with packaging supervisors and team members to meet daily production goals. Communicate material needs and equipment issues clearly and promptly. Complete daily production logs and paperwork accurately. Support cross-training efforts and help out in other departments as needed. Safely store and log finished products in the cooler each day. Participate in department meetings and special company events. Uphold company culture and safety standards at all times. Qualifications SKILLS, ABILITIES AND PERSONAL CHARACTERISTICS Demonstrated mechanical aptitude-understanding how machines work and how to adjust or fix them. Hands-on experience with equipment operation, maintenance, or repairs (preferred). Strong attention to detail and a proactive, solution-oriented mindset. Ability to prioritize tasks and work independently in a team setting. Comfortable working in a physically demanding environment (e.g., noise, heat, moving machinery). Excellent communication skills and commitment to safety. Flexibility to work rotating shifts and respond to emergency call-ins. Positive, team-oriented attitude with a sense of humor and willingness to learn. Benefits: Salary: Commensurate with experience Great Benefits - medical, dental, vision, 401(k) with company match, PTO, and best of all FREE BEVERAGES! Hands-on training - Learn how to use our state of the art equipment! Open Door Policy - At Two Roads, your ideas and feedback matter. With our open door policy, you will experience a more fulfilling career where you are truly valued. Learning Environment - Two Roads is dedicated to employee development and education - we are committed to your success! Advancement opportunities - We are always looking for key players motivated to move up into specialized roles throughout the brewery. Environmental Conditions While performing the duties of this position, the packaging technician is exposed to inside and outside environmental conditions, including but not limited to; extreme heat, potential for physical injury, exposure to hot fluids, pressurized vessels and transfer lines, strong odors, chemicals, loud regular noise, extreme heights, and moving machinery. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Responsive recruiter Benefits: 401(k) matching Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Closets by Design is a nationally recognized leader in home organizing systems. We design, manufacture, and install a complete line of custom closets, home office furniture, media systems, wall-beds, garage cabinetry and more. We desire motivated, organized, caring individuals who have a passion to provide outstanding craftsmanship and superior customer service. We are currently seeking an enthusiastic and motivated Production Operator to join our growing team! Summary/Objective: The Production Operator position is responsible for operating wood cutting and finishing equipment, maintaining production records, and communications associated with activities of equipment, product, and customer specification. They are responsible for the machine and builds including its condition and safe operation. Must maintain product quality and production output in accordance with company and customer standards. Essential Functions: Ability to read work orders to determine profile type, machine setup procedures, and type of build to be cut. Select and install cutting heads and all proper tooling on machine according to the pattern. Run materials through machinery and inspect for proper profile specifications. Make any required adjustments needed before producing order. Use machinery to cut wood to customer specifications. Follow production schedules. Responsible for general machine/tool maintenance. Check for proper lengths and quality, change tooling when worn. Complete production records. Maintain a clean/safe work area at all times. Perform other duties as required. Competencies: Ability to operate machinery safely and determine when maintenance is needed. Possess strong mechanical aptitude. Consistently meet project deadlines. Practical mathematic and measuring skills Must follow company policies, safety instructions, and wear required protective equipment. Able to function effectively as part of a production team. Dependable, works well with others, self-motivated. Required Education and Experience: High school diploma, GED or equivalent 1+ year of experience machine operation Ability to communicate with supervisors and co-workers Must be able to follow directions + follow specific work procedures/steps Experience with hand and power tools Mathematical aptitude Working Conditions and Physical Demands: While performing the duties of this job, the employee is exposed to airborne particles, dust, debris, moving forklifts, noise, and vibration. Physical demands include: Walking: Occasionally between work stations or to obtain parts and supplies. Lifting: Lift and carry up to 50 pounds for short distances. Schedule: Monday - Friday from 7:00 am to 3:30 pm. Benefits: 401(k) match Dental insurance Health insurance Holidays and Paid time off Vision insurance Open door policy Work Location: Bethel, CT Compensation: $17.00 - $20.00 per hour Since 1982, we've built a reputation of integrity as the industry leader in customer service and total customer satisfaction. From our no obligation in-home consultation, custom tailored designs and the highest quality product construction, our products simply offer the best value in the industry. Join a company with over 40 years of strong brand identity. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchise. All inquiries about employment at this franchise should be made directly to the franchise location, and not to Closets By Design Corporate.

Open Scientific provides contract staffing and direct hire recruitment services for the scientific, engineering, laboratory and manufacturing sectors. Job Description Job Title: Production Operator Location: Hicksville, NY Salary: Start rate: $10.00/hr. up to $12.50 within 90 days probation Shift: Both 1st and 2nd shifts are available (Monday through Friday) 1st shift start time: 5:00am / 2nd shift start time: 2:00pm Benefits - 30 day wait, 401K 4% match Job Responsibilities: This position requires for the Operator to change plastic rolls as needed and place them in the machine for wrapping product. The Operator will also walk to get the rolls that are being replaced when the previous rolls are empty. Operate various production machines Assure that the machines are running properly Perform quality checks to confirm finished products are properly sealed Qualifications: Prior warehouse or manufacturing experience preferred Experience working with pharmaceutical or food manufacturing a plus Must be able to lift 60lbs This is a physical, active position that requires standing, bending, lifting, carrying, kneeling, etc Ability to work in a refrigerated environment Additional Information All your information will be kept confidential according to EEO guidelines.